fix: clang-tidy

Address the diagnostics surfaced by the PR clang-tidy job:

- RippleStateHelpers.cpp / TokenHelpers.cpp: mark the STNumber.h
  include with `IWYU pragma: keep`. The header is needed for the
  ValueProxy<STNumber> assignments to sfDust but misc-include-cleaner
  reports it as unused because the type only appears as a template
  parameter of the SLE proxy.
- TokenHelpers.cpp: replace `XRPL_ASSERT(false, ...)` with UNREACHABLE
  in the pre-Lend11 DustSplit guard (misc-static-assert).
- DustSplitArithmetic_test.cpp: drop unused test-helper includes,
  add the direct headers surfaced by misc-include-cleaner
  (contract.h, ApplyView.h, <stdexcept>, <string>, <utility>),
  add const on locals, use designated initializers for
  HolderCtx / TransitCtx / MultiSendCtx, drop std::move on
  trivially-copyable PrettyAsset, make setup* methods static,
  add braces around the sender/receiver leg dispatch, fix an
  argument-comment name mismatch, and rename every testG*_*
  method to camelBack (readability-identifier-naming).

.clang-tidy

@@ -75,6 +75,8 @@ Checks: "-*,
 # readability-static-accessed-through-instance,        # this check is probably unnecessary. It makes the code less readable
 # ---
 
+FormatStyle: file
+
 CheckOptions:
   bugprone-unsafe-functions.ReportMoreUnsafeFunctions: true
   bugprone-unused-return-value.CheckedReturnTypes: ::std::error_code;::std::error_condition;::std::errc
@@ -83,6 +85,8 @@ CheckOptions:
 
   readability-braces-around-statements.ShortStatementLines: 2
   readability-identifier-naming.MacroDefinitionCase: UPPER_CASE
+  readability-identifier-naming.NamespaceCase: lower_case
+  readability-identifier-naming.InlineNamespaceCase: lower_case
   readability-identifier-naming.ClassCase: CamelCase
   readability-identifier-naming.StructCase: CamelCase
   readability-identifier-naming.UnionCase: CamelCase

.cspell.config.yaml

@@ -30,7 +30,9 @@ ignoreRegExpList:
   - ABCDEFGHIJKLMNOPQRSTUVWXYZ
   - ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
 overrides:
-  - filename: "**/*_test.cpp" # all test files
+  - filename:
+      - "**/*_test.cpp" # legacy boost.test files
+      - "src/tests/**/*.cpp" # gtest test files
     ignoreRegExpList:
       - /"[^"]*"/g # double-quoted strings
       - /'[^']*'/g # single-quoted strings
@@ -130,6 +132,7 @@ words:
   - godexsoft
   - gpgcheck
   - gpgkey
+  - Hinnant
   - hotwallet
   - hwaddress
   - hwrap
@@ -163,6 +166,7 @@ words:
   - llection
   - LOCALGOOD
   - logwstream
+  - Lombrozo
   - lseq
   - lsmf
   - ltype
@@ -172,7 +176,6 @@ words:
   - MPTAMM
   - MPTDEX
   - Merkle
-  - Metafuncton
   - misprediction
   - missingok
   - mptbalance
@@ -200,6 +203,7 @@ words:
   - nftokens
   - nftpage
   - nikb
+  - Nikolaos
   - nixfmt
   - nixos
   - nixpkgs
@@ -216,6 +220,7 @@ words:
   - Nyffenegger
   - onlatest
   - ostr
+  - oxalica
   - pargs
   - partitioner
   - paychan
@@ -243,6 +248,16 @@ words:
   - queuable
   - Raphson
   - rcflags
+  - recognise
+  - recognises
+  - recognised
+  - renormalise
+  - renormalises
+  - renormalised
+  - renormalisation
+  - reserialise
+  - reserialises
+  - reserialised
   - replayer
   - rerandomize
   - rerandomization
@@ -262,6 +277,8 @@ words:
   - Rohrs
   - roundings
   - rustc
+  - rustfmt
+  - rustup
   - sahyadri
   - Satoshi
   - scons
@@ -305,6 +322,7 @@ words:
   - takerpays
   - ters
   - TMEndpointv2
+  - toolchain
   - tparam
   - trixie
   - tx
@@ -337,6 +355,7 @@ words:
   - unsquelch
   - unsquelched
   - unsquelching
+  - unsuffixed
   - unvalidated
   - unveto
   - unvetoed
@@ -356,6 +375,7 @@ words:
   - xchain
   - ximinez
   - XMACRO
+  - xored
   - xrpkuwait
   - xrpl
   - xrpld

.envrc

@@ -1 +1,7 @@
+watch_file nix/*.nix
+
+# The dev shell derivation includes all of conan/ (see nix/devshell.nix), so any
+# change in there has to invalidate direnv's cached environment.
+watch_dir conan
+
 use flake

.gersemi/definitions.cmake

@@ -11,6 +11,9 @@ endfunction()
 function(create_symbolic_link target link)
 endfunction()
 
+function(xrpl_add_benchmark name)
+endfunction()
+
 macro(exclude_from_default target_)
 endmacro()
 

.github/dependabot.yml

@@ -15,3 +15,7 @@ updates:
     commit-message:
       prefix: "ci: [DEPENDABOT] "
     target-branch: develop
+    groups:
+      github-actions:
+        patterns:
+          - "*"

.github/pull_request_template.md

@@ -1,10 +1,10 @@
 <!--
-This PR template helps you to write a good pull request description.
+This PR template helps you write a good pull request description.
 Please feel free to include additional useful information even beyond what is requested below.
 
 If your branch is on a personal fork and has a name that allows it to
 run CI build/test jobs (e.g. "ci/foo"), remember to rename it BEFORE
-opening the PR.  This avoids unnecessary redundant test runs. Renaming
+opening the PR. This avoids redundant test runs. Renaming
 the branch after opening the PR will close the PR.
 https://docs.github.com/en/repositories/configuring-branches-and-merges-in-your-repository/managing-branches-in-your-repository/renaming-a-branch
 -->
@@ -15,7 +15,7 @@ https://docs.github.com/en/repositories/configuring-branches-and-merges-in-your-
 Please include a summary of the changes.
 This may be a direct input to the release notes.
 If too broad, please consider splitting into multiple PRs.
-If a relevant task or issue, please link it here.
+If there is a relevant task or issue, please link it here.
 -->
 
 ### Context of Change
@@ -65,5 +65,5 @@ This section may not be needed if your change includes thoroughly commented unit
 
 <!--
 ## Future Tasks
-For future tasks related to PR.
+For future tasks related to this PR.
 -->

.github/scripts/levelization/README.md

@@ -40,18 +40,18 @@ listed later.
 | 04           | xrpl/protocol                       |
 | 05           | xrpl/core xrpl/resource xrpl/server |
 | 06           | xrpl/ledger xrpl/nodestore xrpl/net |
-| 07           | xrpl/shamap                         |
+| 07           | xrpl/shamap xrpl/consensus          |
 
 ## xrpld Modules (Application Implementation)
 
-| Level / Tier | Module(s)                        |
-| ------------ | -------------------------------- |
-| 05           | xrpld/conditions xrpld/consensus |
-| 06           | xrpld/core xrpld/peerfinder      |
-| 07           | xrpld/shamap xrpld/overlay       |
-| 08           | xrpld/app                        |
-| 09           | xrpld/rpc                        |
-| 10           | xrpld/perflog                    |
+| Level / Tier | Module(s)                   |
+| ------------ | --------------------------- |
+| 05           | xrpld/conditions            |
+| 06           | xrpld/core xrpld/peerfinder |
+| 07           | xrpld/shamap xrpld/overlay  |
+| 08           | xrpld/app                   |
+| 09           | xrpld/rpc                   |
+| 10           | xrpld/perflog               |
 
 ## Test Modules
 

.github/scripts/levelization/results/loops.txt

@@ -1,9 +1,6 @@
 Loop: xrpld.app xrpld.overlay
   xrpld.app > xrpld.overlay
 
-Loop: xrpld.app xrpld.peerfinder
-  xrpld.peerfinder ~= xrpld.app
-
 Loop: xrpld.app xrpld.rpc
   xrpld.rpc > xrpld.app
 

.github/scripts/levelization/results/ordering.txt

@@ -1,8 +1,13 @@
+benchmarks.libxrpl > xrpl.basics
+benchmarks.libxrpl > xrpl.config
+benchmarks.libxrpl > xrpl.nodestore
 libxrpl.basics > xrpl.basics
 libxrpl.conditions > xrpl.basics
 libxrpl.conditions > xrpl.conditions
 libxrpl.config > xrpl.basics
 libxrpl.config > xrpl.config
+libxrpl.consensus > xrpl.basics
+libxrpl.consensus > xrpl.consensus
 libxrpl.core > xrpl.basics
 libxrpl.core > xrpl.core
 libxrpl.core > xrpl.json
@@ -22,6 +27,9 @@ libxrpl.nodestore > xrpl.config
 libxrpl.nodestore > xrpl.json
 libxrpl.nodestore > xrpl.nodestore
 libxrpl.nodestore > xrpl.protocol
+libxrpl.peerfinder > xrpl.basics
+libxrpl.peerfinder > xrpl.peerfinder
+libxrpl.peerfinder > xrpl.protocol
 libxrpl.protocol > xrpl.basics
 libxrpl.protocol > xrpl.json
 libxrpl.protocol > xrpl.protocol
@@ -57,9 +65,9 @@ test.app > test.jtx
 test.app > test.unit_test
 test.app > xrpl.basics
 test.app > xrpl.config
+test.app > xrpl.consensus
 test.app > xrpl.core
 test.app > xrpld.app
-test.app > xrpld.consensus
 test.app > xrpld.core
 test.app > xrpld.overlay
 test.app > xrpld.rpc
@@ -80,12 +88,9 @@ test.basics > xrpl.protocol
 test.beast > xrpl.basics
 test.conditions > xrpl.basics
 test.conditions > xrpl.conditions
-test.consensus > test.csf
 test.consensus > test.jtx
-test.consensus > test.unit_test
 test.consensus > xrpl.basics
 test.consensus > xrpld.app
-test.consensus > xrpld.consensus
 test.consensus > xrpl.ledger
 test.consensus > xrpl.protocol
 test.consensus > xrpl.shamap
@@ -100,10 +105,6 @@ test.core > xrpl.json
 test.core > xrpl.protocol
 test.core > xrpl.rdb
 test.core > xrpl.server
-test.csf > xrpl.basics
-test.csf > xrpld.consensus
-test.csf > xrpl.json
-test.csf > xrpl.ledger
 test.json > test.jtx
 test.json > xrpl.json
 test.jtx > test.unit_test
@@ -129,12 +130,9 @@ test.ledger > xrpl.json
 test.ledger > xrpl.ledger
 test.ledger > xrpl.protocol
 test.nodestore > test.jtx
-test.nodestore > test.unit_test
 test.nodestore > xrpl.basics
-test.nodestore > xrpl.config
 test.nodestore > xrpld.core
 test.nodestore > xrpl.nodestore
-test.nodestore > xrpl.protocol
 test.nodestore > xrpl.rdb
 test.overlay > test.jtx
 test.overlay > test.unit_test
@@ -143,19 +141,13 @@ test.overlay > xrpl.config
 test.overlay > xrpld.app
 test.overlay > xrpld.core
 test.overlay > xrpld.overlay
-test.overlay > xrpld.peerfinder
 test.overlay > xrpl.json
 test.overlay > xrpl.nodestore
+test.overlay > xrpl.peerfinder
 test.overlay > xrpl.protocol
 test.overlay > xrpl.resource
 test.overlay > xrpl.server
 test.overlay > xrpl.shamap
-test.peerfinder > test.beast
-test.peerfinder > test.unit_test
-test.peerfinder > xrpl.basics
-test.peerfinder > xrpld.core
-test.peerfinder > xrpld.peerfinder
-test.peerfinder > xrpl.protocol
 test.protocol > test.jtx
 test.protocol > test.unit_test
 test.protocol > xrpl.basics
@@ -189,11 +181,13 @@ test.unit_test > xrpl.basics
 test.unit_test > xrpl.protocol
 tests.libxrpl > xrpl.basics
 tests.libxrpl > xrpl.config
+tests.libxrpl > xrpl.consensus
 tests.libxrpl > xrpl.core
 tests.libxrpl > xrpl.json
 tests.libxrpl > xrpl.ledger
 tests.libxrpl > xrpl.net
 tests.libxrpl > xrpl.nodestore
+tests.libxrpl > xrpl.peerfinder
 tests.libxrpl > xrpl.protocol
 tests.libxrpl > xrpl.protocol_autogen
 tests.libxrpl > xrpl.resource
@@ -203,6 +197,10 @@ tests.libxrpl > xrpl.tx
 xrpl.conditions > xrpl.basics
 xrpl.conditions > xrpl.protocol
 xrpl.config > xrpl.basics
+xrpl.consensus > xrpl.basics
+xrpl.consensus > xrpl.json
+xrpl.consensus > xrpl.ledger
+xrpl.consensus > xrpl.protocol
 xrpl.core > xrpl.basics
 xrpl.core > xrpl.json
 xrpl.core > xrpl.protocol
@@ -217,6 +215,8 @@ xrpl.nodestore > xrpl.basics
 xrpl.nodestore > xrpl.config
 xrpl.nodestore > xrpl.json
 xrpl.nodestore > xrpl.protocol
+xrpl.peerfinder > xrpl.basics
+xrpl.peerfinder > xrpl.protocol
 xrpl.protocol > xrpl.basics
 xrpl.protocol > xrpl.json
 xrpl.protocol_autogen > xrpl.json
@@ -243,23 +243,20 @@ xrpl.tx > xrpl.protocol
 xrpld.app > test.unit_test
 xrpld.app > xrpl.basics
 xrpld.app > xrpl.config
+xrpld.app > xrpl.consensus
 xrpld.app > xrpl.core
-xrpld.app > xrpld.consensus
 xrpld.app > xrpld.core
 xrpld.app > xrpl.json
 xrpld.app > xrpl.ledger
 xrpld.app > xrpl.net
 xrpld.app > xrpl.nodestore
+xrpld.app > xrpl.peerfinder
 xrpld.app > xrpl.protocol
 xrpld.app > xrpl.rdb
 xrpld.app > xrpl.resource
 xrpld.app > xrpl.server
 xrpld.app > xrpl.shamap
 xrpld.app > xrpl.tx
-xrpld.consensus > xrpl.basics
-xrpld.consensus > xrpl.json
-xrpld.consensus > xrpl.ledger
-xrpld.consensus > xrpl.protocol
 xrpld.core > xrpl.basics
 xrpld.core > xrpl.config
 xrpld.core > xrpl.core
@@ -268,21 +265,22 @@ xrpld.core > xrpl.protocol
 xrpld.core > xrpl.rdb
 xrpld.overlay > xrpl.basics
 xrpld.overlay > xrpl.config
+xrpld.overlay > xrpl.consensus
 xrpld.overlay > xrpl.core
-xrpld.overlay > xrpld.consensus
 xrpld.overlay > xrpld.core
 xrpld.overlay > xrpld.peerfinder
 xrpld.overlay > xrpl.json
 xrpld.overlay > xrpl.ledger
+xrpld.overlay > xrpl.peerfinder
 xrpld.overlay > xrpl.protocol
 xrpld.overlay > xrpl.resource
 xrpld.overlay > xrpl.server
 xrpld.overlay > xrpl.shamap
 xrpld.overlay > xrpl.tx
 xrpld.peerfinder > xrpl.basics
-xrpld.peerfinder > xrpl.config
+xrpld.peerfinder > xrpld.app
 xrpld.peerfinder > xrpld.core
-xrpld.peerfinder > xrpl.protocol
+xrpld.peerfinder > xrpl.peerfinder
 xrpld.peerfinder > xrpl.rdb
 xrpld.perflog > xrpl.basics
 xrpld.perflog > xrpl.config

.github/scripts/rename/namespace.sh

@@ -46,9 +46,6 @@ for DIRECTORY in "${DIRECTORIES[@]}"; do
     done
 done
 
-# Special case for NuDBFactory that has ripple twice in the test suite name.
-${SED_COMMAND} -i -E 's/(BEAST_DEFINE_TESTSUITE.+)ripple(.+)/\1xrpl\2/g' src/test/nodestore/NuDBFactory_test.cpp
-
 DIRECTORY=$1
 find "${DIRECTORY}" -type f -name "*.md" | while read -r FILE; do
     echo "Processing file: ${FILE}"

.github/scripts/strategy-matrix/generate.py

@@ -33,6 +33,10 @@ def get_cmake_args(build_type: str, extra_args: str) -> str:
 # Every config must declare 'minimal'. Minimal configs form the reduced matrix
 # built for pull requests by default; the full matrix adds the rest. Packaging
 # configs declare it too, but packaging is gated in the workflow, not by it.
+#
+# Configs may also opt into 'benchmark' to smoke-run the benchmarks. Note that
+# the flag applies to every entry a config expands into, so only set it on
+# configs that expand to a single combination.
 
 
 @dataclasses.dataclass
@@ -43,6 +47,7 @@ class LinuxConfig:
     build_type: list[str]
     arch: list[str]
     minimal: bool
+    benchmark: bool = False  # if true, smoke-run the benchmarks after testing
     sanitizers: list[str] = dataclasses.field(default_factory=list)
     suffix: str = ""
     extra_cmake_args: str = ""
@@ -81,6 +86,7 @@ class PlatformConfig:
     build_type: list[str]
     minimal: bool
     build_only: bool = False  # if true, skip tests (e.g. macos/Windows Debug)
+    benchmark: bool = False  # if true, smoke-run the benchmarks after testing
     extra_cmake_args: str = ""
 
     def __post_init__(self) -> None:
@@ -125,6 +131,7 @@ class MatrixEntry:
     cmake_args: str
     cmake_target: str
     build_only: bool
+    benchmark: bool
     build_type: str
     architecture: Architecture
     sanitizers: str
@@ -136,7 +143,8 @@ class MatrixEntry:
 class PackagingEntry:
     """One entry in the generated packaging strategy matrix."""
 
-    artifact_name: str
+    xrpld_artifact_name: str
+    validator_keys_artifact_name: str
     image: str
     distro: str  # e.g. "debian" or "rhel"; drives package-format-specific steps
 
@@ -193,6 +201,7 @@ def expand_linux_matrix(linux: LinuxFile, minimal: bool) -> list[MatrixEntry]:
                         cmake_args=get_cmake_args(build_type, cfg.extra_cmake_args),
                         cmake_target="all",
                         build_only=False,
+                        benchmark=cfg.benchmark,
                         build_type=build_type,
                         architecture=arch_info,
                         sanitizers=sanitizer,
@@ -210,14 +219,19 @@ def expand_linux_packaging(linux: LinuxFile) -> list[PackagingEntry]:
     the nix-based build images, because deb/rpm tooling (debhelper, rpm-build)
     is taken from the distro's archive rather than from nixpkgs. Each config
     entry carries its own 'image'.
+
+    The artifact names must match what the build job uploads: one artifact per
+    binary, each named after the build config.
     """
     entries = []
     for distro, configs in linux.package_configs.items():
         for cfg in configs:
             for compiler, build_type in itertools.product(cfg.compiler, cfg.build_type):
+                config_name = f"{distro}-{compiler}-{build_type.lower()}-amd64"
                 entries.append(
                     PackagingEntry(
-                        artifact_name=f"xrpld-{distro}-{compiler}-{build_type.lower()}-amd64",
+                        xrpld_artifact_name=f"xrpld-{config_name}",
+                        validator_keys_artifact_name=f"validator-keys-{config_name}",
                         image=cfg.image,
                         distro=distro,
                     )
@@ -245,6 +259,7 @@ def expand_platform_matrix(pf: PlatformFile, minimal: bool) -> list[MatrixEntry]
                     cmake_args=get_cmake_args(build_type, cfg.extra_cmake_args),
                     cmake_target="install" if is_windows else "all",
                     build_only=cfg.build_only,
+                    benchmark=cfg.benchmark,
                     build_type=build_type,
                     architecture=Architecture(platform=pf.platform, runner=pf.runner),
                     sanitizers="",

.github/scripts/strategy-matrix/linux.json

@@ -1,13 +1,23 @@
 {
-  "image_tag": "sha-e29b523",
+  "image_tag": "sha-fecfc0c",
   "configs": {
     "ubuntu": [
+      {
+        "compiler": ["gcc"],
+        "build_type": ["Debug"],
+        "arch": ["amd64"],
+        "minimal": true,
+        "suffix": "coverage",
+        "extra_cmake_args": "-DUNIT_TEST_REFERENCE_FEE=500 -Dcoverage=ON -Dcoverage_format=xml -DCODE_COVERAGE_VERBOSE=ON -DCMAKE_C_FLAGS=-O0 -DCMAKE_CXX_FLAGS=-O0"
+      },
       {
         "compiler": ["clang"],
         "build_type": ["Release"],
         "arch": ["amd64"],
-        "minimal": true
+        "minimal": true,
+        "benchmark": true
       },
+
       {
         "compiler": ["gcc"],
         "build_type": ["Release"],
@@ -29,14 +39,6 @@
         "sanitizers": ["address", "undefinedbehavior"]
       },
 
-      {
-        "compiler": ["gcc"],
-        "build_type": ["Debug"],
-        "arch": ["amd64"],
-        "minimal": true,
-        "suffix": "coverage",
-        "extra_cmake_args": "-DUNIT_TEST_REFERENCE_FEE=500 -Dcoverage=ON -Dcoverage_format=xml -DCODE_COVERAGE_VERBOSE=ON -DCMAKE_C_FLAGS=-O0 -DCMAKE_CXX_FLAGS=-O0"
-      },
       {
         "compiler": ["clang"],
         "build_type": ["Debug"],
@@ -68,7 +70,8 @@
         "compiler": ["gcc"],
         "build_type": ["Release"],
         "arch": ["amd64"],
-        "minimal": false
+        "minimal": false,
+        "extra_cmake_args": "-Dvalidator_keys=ON"
       }
     ],
 
@@ -77,7 +80,8 @@
         "compiler": ["gcc"],
         "build_type": ["Release"],
         "arch": ["amd64"],
-        "minimal": false
+        "minimal": false,
+        "extra_cmake_args": "-Dvalidator_keys=ON"
       }
     ]
   },

.github/workflows/build-nix-images.yml

@@ -1,4 +1,4 @@
-name: Build Nix Docker images
+name: Build `nix` Docker images
 
 on:
   push:
@@ -8,20 +8,24 @@ on:
       - ".github/workflows/build-nix-images.yml"
       - "flake.nix"
       - "flake.lock"
+      - "rust-toolchain.toml"
       - "nix/**"
       - "!nix/docker/README.md"
       - "!nix/devshell.nix"
       - "bin/check-tools.sh"
+      - "bin/default-loader-path.sh"
       - "bin/install-sanitizer-libs.sh"
   pull_request:
     paths:
       - ".github/workflows/build-nix-images.yml"
       - "flake.nix"
       - "flake.lock"
+      - "rust-toolchain.toml"
       - "nix/**"
       - "!nix/docker/README.md"
       - "!nix/devshell.nix"
       - "bin/check-tools.sh"
+      - "bin/default-loader-path.sh"
       - "bin/install-sanitizer-libs.sh"
   workflow_dispatch:
 
@@ -36,7 +40,7 @@ defaults:
 
 jobs:
   build-merge:
-    name: Build and push nix-${{ matrix.distro.name }}
+    name: Build and push `nix-${{ matrix.distro.name }}` image
     permissions:
       contents: read
       packages: write
@@ -54,7 +58,7 @@ jobs:
             base_image: debian:bookworm
           - name: rhel
             base_image: registry.access.redhat.com/ubi9/ubi:latest
-    uses: XRPLF/actions/.github/workflows/build-multiarch-image.yml@ee03d31bcc4501d7599dc1b1ecd7a34af582ad1c
+    uses: XRPLF/actions/.github/workflows/build-multiarch-image.yml@9e7e4e80af9e684c116b38369add8eea64451f32
     with:
       image_name: xrpld/nix-${{ matrix.distro.name }}
       dockerfile: nix/docker/Dockerfile

.github/workflows/build-packaging-images.yml

@@ -1,4 +1,4 @@
-name: Build packaging Docker images
+name: Build `packaging` Docker images
 
 on:
   push:
@@ -26,7 +26,7 @@ defaults:
 
 jobs:
   build-merge:
-    name: Build and push packaging-${{ matrix.distro.name }}
+    name: Build and push `packaging-${{ matrix.distro.name }}` image
     permissions:
       contents: read
       packages: write
@@ -38,7 +38,7 @@ jobs:
             base_image: debian:bookworm
           - name: rhel
             base_image: registry.access.redhat.com/ubi9/ubi:latest
-    uses: XRPLF/actions/.github/workflows/build-multiarch-image.yml@ee03d31bcc4501d7599dc1b1ecd7a34af582ad1c
+    uses: XRPLF/actions/.github/workflows/build-multiarch-image.yml@9e7e4e80af9e684c116b38369add8eea64451f32
     with:
       image_name: xrpld/packaging-${{ matrix.distro.name }}
       dockerfile: package/Dockerfile

.github/workflows/build-pre-commit-image.yml

@@ -0,0 +1,38 @@
+name: Build `pre-commit` Docker image
+
+on:
+  push:
+    branches:
+      - develop
+    paths:
+      - ".github/workflows/build-pre-commit-image.yml"
+      - "bin/pre-commit/Dockerfile"
+      - "rust-toolchain.toml"
+  pull_request:
+    paths:
+      - ".github/workflows/build-pre-commit-image.yml"
+      - "bin/pre-commit/Dockerfile"
+      - "rust-toolchain.toml"
+  workflow_dispatch:
+
+concurrency:
+  # Read `on-trigger.yml` for the rationale behind this concurrency group name.
+  group: ${{ github.workflow }}-${{ github.event_name == 'push' && github.ref == 'refs/heads/develop' && github.sha || github.ref }}
+  cancel-in-progress: true
+
+defaults:
+  run:
+    shell: bash
+
+jobs:
+  build-merge:
+    name: Build and push `pre-commit` image
+    permissions:
+      contents: read
+      packages: write
+    uses: XRPLF/actions/.github/workflows/build-multiarch-image.yml@9e7e4e80af9e684c116b38369add8eea64451f32
+    with:
+      image_name: xrpld/pre-commit
+      dockerfile: bin/pre-commit/Dockerfile
+      base_image: ubuntu:26.04
+      push: ${{ github.event_name == 'push' }}

.github/workflows/check-pr-description.yml

@@ -23,7 +23,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout repository
-        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
       - name: Write PR body to file
         env:

.github/workflows/check-pr-title.yml

@@ -20,4 +20,4 @@ on:
 jobs:
   check_title:
     if: ${{ github.event.pull_request.draft != true }}
-    uses: XRPLF/actions/.github/workflows/check-pr-title.yml@cba1f0891650baf1a9c88624dc2d72573be2eb81
+    uses: XRPLF/actions/.github/workflows/check-pr-title.yml@d7c65e49225a38f6d8010eacf017bb5a98d7476c

.github/workflows/check-tools.yml

@@ -0,0 +1,114 @@
+# Verifies the committed snapshots of `bin/check-tools.sh` output for each Nix
+# environment (see nix/check-tools/). If the environment changes — a new image
+# tag, an updated flake.lock, a different tool list — without the matching
+# snapshot being regenerated and committed, this workflow fails so the drift is
+# caught in review.
+#
+# To regenerate the snapshots, see nix/check-tools/README.md.
+name: Check tools
+
+on:
+  pull_request:
+    paths:
+      - ".github/workflows/check-tools.yml"
+      - ".github/scripts/strategy-matrix/linux.json"
+      - "bin/check-tools.sh"
+      - "nix/**"
+      - "flake.nix"
+      - "flake.lock"
+      - "rust-toolchain.toml"
+  push:
+    branches:
+      - "develop"
+    paths:
+      - ".github/workflows/check-tools.yml"
+      - ".github/scripts/strategy-matrix/linux.json"
+      - "bin/check-tools.sh"
+      - "nix/**"
+      - "flake.nix"
+      - "flake.lock"
+      - "rust-toolchain.toml"
+  workflow_dispatch:
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+defaults:
+  run:
+    shell: bash
+
+jobs:
+  # The nix-nixos image tag is pinned alongside the build matrix in linux.json,
+  # so snapshots are checked against the exact image CI builds against.
+  linux-image-tag:
+    runs-on: ubuntu-latest
+    outputs:
+      tag: ${{ steps.tag.outputs.tag }}
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+
+      - name: Read nix image tag
+        id: tag
+        run: echo "tag=$(jq -r .image_tag .github/scripts/strategy-matrix/linux.json)" >>"${GITHUB_OUTPUT}"
+
+  # One job for all environments; they differ only in whether the tools come
+  # from the nix-nixos container (Linux) or `nix develop` (macOS).
+  check-tools:
+    needs: linux-image-tag
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          - runner: ubuntu-latest
+            snapshot: nix/check-tools/nix-ubuntu-amd64.txt
+            nix_develop: false
+          - runner: ubuntu-24.04-arm
+            snapshot: nix/check-tools/nix-ubuntu-arm64.txt
+            nix_develop: false
+          - runner: macos-26-apple-clang-21
+            snapshot: nix/check-tools/macos.txt
+            nix_develop: true
+    runs-on: ${{ matrix.runner }}
+    # Linux runs inside the pinned nix-nixos image; macOS runs natively and uses
+    # the flake's dev shell instead (see the run step below).
+    container: ${{ !matrix.nix_develop && format('ghcr.io/xrplf/xrpld/nix-ubuntu:{0}', needs.linux-image-tag.outputs.tag) || null }}
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+
+      - name: Prepare runner
+        uses: XRPLF/actions/prepare-runner@c00c22ada3bd6bcda48fcb0d62fbbab49fec8a0f
+        with:
+          enable_ccache: false
+
+      - name: Regenerate snapshot
+        env:
+          CHECK_TOOLS_SKIP_CLONE: "1"
+          # check-tools.sh skips some macOS tools when CI is set; the snapshots
+          # capture the full `nix develop` environment, so unset it here.
+          CI: ""
+        run: |
+          if [ "${{ matrix.nix_develop }}" = "true" ]; then
+              # `nix develop` prints the dev-shell greeting first; keep only the
+              # check-tools.sh output (from the "Detected OS:" line onward).
+              nix --extra-experimental-features "nix-command flakes" develop \
+                  -c bash bin/check-tools.sh | sed -n '/^Detected OS:/,$p' >"${{ matrix.snapshot }}"
+          else
+              bash bin/check-tools.sh >"${{ matrix.snapshot }}"
+          fi
+
+      - name: Verify snapshot is up to date
+        run: |
+          if ! git diff --exit-code -- "${{ matrix.snapshot }}"; then
+              echo "::error::${{ matrix.snapshot }} is out of date. Regenerate it (see nix/check-tools/README.md) and commit the result."
+              exit 1
+          fi
+
+      - name: Upload regenerated snapshot
+        if: failure()
+        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+        with:
+          name: check-tools-${{ runner.os }}-${{ runner.arch }}
+          path: ${{ matrix.snapshot }}

.github/workflows/on-pr.yml

@@ -25,18 +25,11 @@ on:
       - unlabeled
 
 concurrency:
-  # Use a per-ref group so a newer run (a push, or a change to a label below)
-  # supersedes the in-progress one for that ref. Label events we don't act on get
-  # their own unique group (per run id) instead, keeping them out of the shared
-  # group so real builds keep running. Keep this list in sync with `should-run`.
-  group: >-
-    ${{ github.workflow }}-${{ github.ref }}${{
-      ((github.event.action == 'labeled' || github.event.action == 'unlabeled')
-      && github.event.label.name != 'Ready to merge'
-      && github.event.label.name != 'DraftRunCI'
-      && github.event.label.name != 'Full CI build')
-      && format('-{0}', github.run_id) || ''
-    }}
+  # A single per-ref group with cancel-in-progress means any newer run (a push
+  # or a label change) supersedes the in-progress one for that ref. Keeping
+  # exactly one authoritative run per ref ensures a fast do-nothing run can never
+  # mask a real build's checks.
+  group: ${{ github.workflow }}-${{ github.ref }}
   cancel-in-progress: true
 
 defaults:
@@ -44,26 +37,22 @@ defaults:
     shell: bash
 
 jobs:
-  # This job determines whether the rest of the workflow should run. It runs
-  # when the PR is not a draft (which should also cover merge-group) or has the
-  # 'DraftRunCI' or 'Full CI build' label. For label events it only runs when the
-  # label added or removed is one we act on ('Ready to merge', 'DraftRunCI' or
-  # 'Full CI build'), so unrelated label changes do not trigger a redundant run.
+  # This job determines whether the rest of the workflow should run at all,
+  # based on the current set of labels: it runs when the PR is not a draft
+  # (which should also cover merge-group) or has the 'DraftRunCI' or
+  # 'Full CI build' label. Whether a build then happens, and whether it is the
+  # minimal or full matrix, is decided further below and in the strategy matrix.
   should-run:
     if: >-
       ${{
-        ((github.event.action != 'labeled' && github.event.action != 'unlabeled')
-          || github.event.label.name == 'Ready to merge'
-          || github.event.label.name == 'DraftRunCI'
-          || github.event.label.name == 'Full CI build')
-        && (!github.event.pull_request.draft
-          || contains(github.event.pull_request.labels.*.name, 'DraftRunCI')
-          || contains(github.event.pull_request.labels.*.name, 'Full CI build'))
+        !github.event.pull_request.draft
+        || contains(github.event.pull_request.labels.*.name, 'DraftRunCI')
+        || contains(github.event.pull_request.labels.*.name, 'Full CI build')
       }}
     runs-on: ubuntu-latest
     steps:
       - name: Checkout repository
-        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
       - name: Determine changed files
         # This step checks whether any files have changed that should
         # cause the next jobs to run. We do it this way rather than
@@ -93,6 +82,7 @@ jobs:
             .github/scripts/strategy-matrix/**
             .github/workflows/reusable-build-test-config.yml
             .github/workflows/reusable-build-test.yml
+            .github/workflows/reusable-check-autogen.yml
             .github/workflows/reusable-clang-tidy.yml
             .github/workflows/reusable-package.yml
             .github/workflows/reusable-strategy-matrix.yml
@@ -101,6 +91,7 @@ jobs:
             .clang-tidy
             .codecov.yml
             bin/check-tools.sh
+            bin/default-loader-path.sh
             cfg/**
             cmake/**
             conan/**
@@ -136,6 +127,11 @@ jobs:
     outputs:
       go: ${{ steps.go.outputs.go == 'true' }}
 
+  check-autogen:
+    needs: should-run
+    if: ${{ needs.should-run.outputs.go == 'true' }}
+    uses: ./.github/workflows/reusable-check-autogen.yml
+
   check-levelization:
     needs: should-run
     if: ${{ needs.should-run.outputs.go == 'true' }}
@@ -210,6 +206,7 @@ jobs:
   passed:
     if: failure() || cancelled()
     needs:
+      - check-autogen
       - check-levelization
       - check-rename
       - clang-tidy

.github/workflows/on-trigger.yml

@@ -20,6 +20,7 @@ on:
       - ".github/scripts/strategy-matrix/**"
       - ".github/workflows/reusable-build-test-config.yml"
       - ".github/workflows/reusable-build-test.yml"
+      - ".github/workflows/reusable-check-autogen.yml"
       - ".github/workflows/reusable-clang-tidy.yml"
       - ".github/workflows/reusable-package.yml"
       - ".github/workflows/reusable-strategy-matrix.yml"
@@ -28,6 +29,7 @@ on:
       - ".clang-tidy"
       - ".codecov.yml"
       - "bin/check-tools.sh"
+      - "bin/default-loader-path.sh"
       - "cfg/**"
       - "cmake/**"
       - "conan/**"
@@ -66,6 +68,9 @@ defaults:
     shell: bash
 
 jobs:
+  check-autogen:
+    uses: ./.github/workflows/reusable-check-autogen.yml
+
   clang-tidy:
     uses: ./.github/workflows/reusable-clang-tidy.yml
     permissions:

.github/workflows/pre-commit.yml

@@ -14,7 +14,7 @@ on:
 jobs:
   # Call the workflow in the XRPLF/actions repo that runs the pre-commit hooks.
   run-hooks:
-    uses: XRPLF/actions/.github/workflows/pre-commit.yml@1bde119a1ab71305ba5d3716e7a82cea1c7bdede
+    uses: XRPLF/actions/.github/workflows/pre-commit.yml@3ba08d6ddf114092891d48491fc2e26c3ba15552
     with:
       runs_on: ubuntu-latest
-      container: '{ "image": "ghcr.io/xrplf/ci/tools-rippled-pre-commit:sha-41ec7c1" }'
+      container: '{ "image": "ghcr.io/xrplf/xrpld/pre-commit:sha-f56b79f" }'

.github/workflows/publish-docs.yml

@@ -41,13 +41,13 @@ env:
 jobs:
   build:
     runs-on: ubuntu-latest
-    container: ghcr.io/xrplf/xrpld/nix-ubuntu:sha-e29b523
+    container: ghcr.io/xrplf/xrpld/nix-ubuntu:sha-fecfc0c
     steps:
       - name: Checkout repository
-        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
       - name: Prepare runner
-        uses: XRPLF/actions/prepare-runner@64ec3cf3b152b4444638f470bbd6df7a7a30c81c
+        uses: XRPLF/actions/prepare-runner@c00c22ada3bd6bcda48fcb0d62fbbab49fec8a0f
         with:
           enable_ccache: false
 

.github/workflows/reusable-build-test-config.yml

@@ -3,6 +3,12 @@ name: Build and test configuration
 on:
   workflow_call:
     inputs:
+      benchmark:
+        description: "Whether to smoke-run the benchmarks after testing."
+        required: false
+        type: boolean
+        default: false
+
       build_only:
         description: 'Whether to only build or to build and test the code ("true", "false").'
         required: true
@@ -100,9 +106,10 @@ jobs:
       # header files are copied into separate directories by CMake, which will
       # otherwise result in cache misses.
       CCACHE_SLOPPINESS: include_file_ctime,include_file_mtime
-      # Determine if coverage and voidstar should be enabled.
+      # Determine if coverage, voidstar and validator-keys should be enabled.
       COVERAGE_ENABLED: ${{ contains(inputs.cmake_args, '-Dcoverage=ON') }}
       VOIDSTAR_ENABLED: ${{ contains(inputs.cmake_args, '-Dvoidstar=ON') }}
+      VALIDATOR_KEYS_ENABLED: ${{ contains(inputs.cmake_args, '-Dvalidator_keys=ON') }}
       SANITIZERS_ENABLED: ${{ inputs.sanitizers != '' }}
     steps:
       - name: Cleanup workspace (macOS and Windows)
@@ -110,10 +117,10 @@ jobs:
         uses: XRPLF/actions/cleanup-workspace@c7d9ce5ebb03c752a354889ecd870cadfc2b1cd4
 
       - name: Checkout repository
-        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
       - name: Prepare runner
-        uses: XRPLF/actions/prepare-runner@64ec3cf3b152b4444638f470bbd6df7a7a30c81c
+        uses: XRPLF/actions/prepare-runner@c00c22ada3bd6bcda48fcb0d62fbbab49fec8a0f
         with:
           enable_ccache: ${{ inputs.ccache_enabled }}
 
@@ -170,9 +177,9 @@ jobs:
               ..
 
       # Export the sanitizer options before any instrumented binary runs. The
-      # protocol code-gen and build steps below invoke instrumented dependency
-      # tools (protoc, grpc), so setting UBSAN_OPTIONS here lets the UBSan
-      # suppression list silence their diagnostics too, not just at test time.
+      # build step below invokes instrumented dependency tools (protoc, grpc),
+      # so setting UBSAN_OPTIONS here lets the UBSan suppression list silence
+      # their diagnostics too, not just at test time.
       # GITHUB_WORKSPACE (not the github.workspace context) is used so the path
       # resolves correctly inside the container job.
       - name: Set sanitizer options
@@ -190,32 +197,6 @@ jobs:
           echo "UBSAN_OPTIONS=include=${SUPP}/runtime-ubsan-options.txt:suppressions=${SUPP}/ubsan.supp" >>${GITHUB_ENV}
           echo "LSAN_OPTIONS=include=${SUPP}/runtime-lsan-options.txt:suppressions=${SUPP}/lsan.supp" >>${GITHUB_ENV}
 
-      - name: Check protocol autogen files are up-to-date
-        working-directory: ${{ env.BUILD_DIR }}
-        env:
-          MESSAGE: |
-
-            The generated protocol wrapper classes are out of date.
-
-            This typically happens when the macro files or generator scripts
-            have changed but the generated files were not regenerated.
-
-            To fix this:
-              1. Run: cmake --build . --target setup_code_gen
-              2. Run: cmake --build . --target code_gen
-              3. Commit and push the regenerated files
-        run: |
-          set -e
-          cmake --build . --target setup_code_gen
-          cmake --build . --target code_gen
-          DIFF=$(git -C .. status --porcelain -- include/xrpl/protocol_autogen src/tests/libxrpl/protocol_autogen)
-          if [ -n "${DIFF}" ]; then
-              echo "::error::Generated protocol files are out of date"
-              git -C .. diff -- include/xrpl/protocol_autogen src/tests/libxrpl/protocol_autogen
-              echo "${MESSAGE}"
-              exit 1
-          fi
-
       - name: Build the binary
         working-directory: ${{ env.BUILD_DIR }}
         env:
@@ -223,11 +204,13 @@ jobs:
           BUILD_TYPE: ${{ inputs.build_type }}
           CMAKE_TARGET: ${{ inputs.cmake_target }}
         run: |
+          set -o pipefail
           cmake \
               --build . \
               --config "${BUILD_TYPE}" \
               --parallel "${BUILD_NPROC}" \
-              --target "${CMAKE_TARGET}"
+              --target "${CMAKE_TARGET}" \
+              2>&1 | tee "${GITHUB_WORKSPACE}/build.log"
 
       - name: Show ccache statistics
         if: ${{ inputs.ccache_enabled }}
@@ -247,6 +230,22 @@ jobs:
           retention-days: 3
           if-no-files-found: error
 
+      - name: Run the validator-keys tests
+        if: ${{ env.VALIDATOR_KEYS_ENABLED == 'true' }}
+        working-directory: ${{ env.BUILD_DIR }}
+        run: ./validator-keys --unittest
+
+      - name: Upload the validator-keys binary
+        if: ${{ github.event.repository.visibility == 'public' && env.VALIDATOR_KEYS_ENABLED == 'true' }}
+        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+        with:
+          name: validator-keys-${{ inputs.config_name }}
+          path: |
+            ${{ env.BUILD_DIR }}/validator-keys
+            ${{ env.BUILD_DIR }}/validator-keys-LICENSE
+          retention-days: 3
+          if-no-files-found: error
+
       - name: Upload the test binary (Linux)
         if: ${{ github.event.repository.visibility == 'public' && runner.os == 'Linux' }}
         uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
@@ -264,7 +263,7 @@ jobs:
           ./xrpld --definitions | python3 -m json.tool >server_definitions.json
 
       - name: Upload server definitions
-        if: ${{ github.event.repository.visibility == 'public' && inputs.config_name == 'debian-gcc-release-amd64' }}
+        if: ${{ github.event.repository.visibility == 'public' && inputs.config_name == 'ubuntu-gcc-debug-amd64-coverage' }}
         uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
         with:
           name: server-definitions
@@ -322,27 +321,49 @@ jobs:
               PRELOAD=""
           fi
 
-          LD_PRELOAD="$PRELOAD" ./xrpld --unittest --unittest-jobs "${BUILD_NPROC}" 2>&1 | tee unittest.log
+          LD_PRELOAD="$PRELOAD" ./xrpld --unittest --unittest-jobs "${BUILD_NPROC}" 2>&1 | tee "${GITHUB_WORKSPACE}/unittest.log"
 
-      - name: Show test failure summary
-        if: ${{ failure() && !inputs.build_only }}
-        env:
-          WORKING_DIR: ${{ runner.os == 'Windows' && format('{0}\{1}', env.BUILD_DIR, inputs.build_type) || env.BUILD_DIR }}
+      # Smoke-run every benchmark module with a single repetition to confirm the
+      # benchmarks still build and execute. This is a correctness check, not a
+      # performance measurement, so there is nothing to gain from repeating it
+      # across configurations: it is opted into by a single config in the
+      # strategy matrix (see the 'benchmark' flag in the JSON files), which
+      # keeps it off instrumented builds (sanitizers/coverage/voidstar), where
+      # it would be slow and meaningless, off Debug builds, where it is much
+      # slower, and off Windows, where the `install` target does not build them.
+      - name: Run the benchmarks
+        if: ${{ inputs.benchmark }}
+        working-directory: ${{ env.BUILD_DIR }}
         run: |
-          if [ ! -d "${WORKING_DIR}" ]; then
-              echo "Working directory '${WORKING_DIR}' does not exist."
-              exit 0
-          fi
+          rc=0
+          while IFS= read -r bench; do
+              echo "::group::${bench}"
+              "./${bench}" --benchmark_repetitions=1 || rc=1
+              echo "::endgroup::"
+          done < <(find src/benchmarks -type f -perm -u+x -name 'xrpl.bench.*')
+          exit "${rc}"
 
-          cd "${WORKING_DIR}"
+      - name: Show build/test failure summary
+        if: ${{ failure() }}
+        run: |
+          cd "${GITHUB_WORKSPACE}"
 
-          if [ ! -f unittest.log ]; then
-              echo "unittest.log not found; embedded tests may not have run."
-              exit 0
-          fi
-
-          if ! grep -E "failed" unittest.log; then
-              echo "Log present but no failure lines found in unittest.log."
+          if [ -f unittest.log ]; then
+              if ! grep -E "failed" unittest.log | grep -vE "^I[0-9]|^[0-9]+> (ERR:|FTL:)"; then
+                  echo "unittest.log present but no failure lines found."
+              fi
+          elif [ -f build.log ]; then
+              # GCC/Clang emit "error:" (covers "fatal error:"); MSVC emits
+              # "error C####:", "error LNK####:", and "fatal error LNK####:".
+              # -A6 prints the lines that follow each match (source line, caret,
+              # notes, and the "N errors generated" tally) to capture the whole
+              # diagnostic block.
+              if ! grep -E -A6 "error:|error C[0-9]{4}|error LNK[0-9]{4}|fatal error" build.log; then
+                  echo "build.log present but no compile errors found."
+              fi
+          else
+              echo "unittest.log/build.log not found; something went wrong."
+              exit 1
           fi
       - name: Debug failure (Linux)
         if: ${{ failure() && runner.os == 'Linux' && !inputs.build_only }}
@@ -366,7 +387,7 @@ jobs:
               --target coverage
 
       - name: Upload coverage report
-        if: ${{ github.repository == 'XRPLF/rippled' && !inputs.build_only && env.COVERAGE_ENABLED == 'true' }}
+        if: ${{ github.repository_owner == 'XRPLF' && !inputs.build_only && env.COVERAGE_ENABLED == 'true' }}
         uses: codecov/codecov-action@fb8b3582c8e4def4969c97caa2f19720cb33a72f # v7.0.0
         with:
           disable_search: true

.github/workflows/reusable-build-test.yml

@@ -40,6 +40,7 @@ jobs:
       fail-fast: ${{ github.event_name == 'merge_group' }}
       matrix: ${{ fromJson(needs.generate-matrix.outputs.matrix) }}
     with:
+      benchmark: ${{ matrix.benchmark }}
       build_only: ${{ matrix.build_only }}
       build_type: ${{ matrix.build_type }}
       ccache_enabled: ${{ inputs.ccache_enabled }}

.github/workflows/reusable-check-autogen.yml

@@ -0,0 +1,76 @@
+# This workflow checks that the generated protocol wrapper classes are
+# up-to-date with the macro files and generator scripts they are produced from,
+# see more info in include/xrpl/protocol_autogen/README.md.
+name: Check autogen
+
+# This workflow can only be triggered by other workflows.
+on: workflow_call
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}-autogen
+  cancel-in-progress: true
+
+defaults:
+  run:
+    shell: bash
+
+env:
+  BUILD_DIR: build/codegen
+
+jobs:
+  autogen:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+
+      - name: Set up Python
+        uses: actions/setup-python@5fda3b95a4ea91299a34e894583c3862153e4b97 # v7.0.0
+        with:
+          python-version: "3.13"
+
+      # Code generation is pure Python, so the standalone project below offers
+      # the same targets as the main build without needing its dependencies or
+      # a compiler, which keeps this job down to a few seconds.
+      - name: Configure CMake
+        run: cmake -S cmake/codegen -B "${BUILD_DIR}"
+
+      - name: Install code generation dependencies
+        run: cmake --build "${BUILD_DIR}" --target setup_code_gen
+
+      - name: Generate code
+        run: cmake --build "${BUILD_DIR}" --target code_gen
+
+      - name: Check for differences
+        env:
+          MESSAGE: |
+
+            The generated protocol wrapper classes are out of date.
+
+            This typically happens when the macro files or generator scripts
+            have changed but the generated files were not regenerated.
+
+            Run the following from the repository root, then commit and push
+            the regenerated files. This needs neither the dependencies nor a
+            compiler. See include/xrpl/protocol_autogen/README.md for more info.
+
+              cmake -S cmake/codegen -B build/codegen
+              cmake --build build/codegen --target setup_code_gen
+              cmake --build build/codegen --target code_gen
+
+            In an already configured build directory, the 'setup_code_gen' and
+            'code_gen' targets do the same thing.
+        run: |
+          # Record untracked files in the index without staging their contents,
+          # so that classes generated for a newly added transaction or ledger
+          # entry type show up in the diff below rather than silently as an
+          # empty one.
+          git add --intent-to-add .
+          DIFF=$(git status --porcelain)
+          if [ -n "${DIFF}" ]; then
+              # Print the differences to give the contributor a hint about what to
+              # expect when running code generation on their own machine.
+              git diff
+              echo "${MESSAGE}"
+              exit 1
+          fi

.github/workflows/reusable-check-levelization.yml

@@ -18,7 +18,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout repository
-        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
       - name: Check levelization
         run: python .github/scripts/levelization/generate.py
       - name: Check for differences

.github/workflows/reusable-check-rename.yml

@@ -18,7 +18,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout repository
-        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
       - name: Check definitions
         run: .github/scripts/rename/definitions.sh .
       - name: Check copyright notices

.github/workflows/reusable-clang-tidy.yml

@@ -34,16 +34,16 @@ jobs:
     needs: [determine-files]
     if: ${{ needs.determine-files.outputs.cpp_changed_files != '' || needs.determine-files.outputs.need_full_run == 'true' }}
     runs-on: ["self-hosted", "Linux", "X64", "heavy"]
-    container: "ghcr.io/xrplf/xrpld/nix-debian:sha-e29b523"
+    container: "ghcr.io/xrplf/xrpld/nix-debian:sha-fecfc0c"
     permissions:
       contents: read
       issues: write
     steps:
       - name: Checkout repository
-        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
       - name: Prepare runner
-        uses: XRPLF/actions/prepare-runner@64ec3cf3b152b4444638f470bbd6df7a7a30c81c
+        uses: XRPLF/actions/prepare-runner@c00c22ada3bd6bcda48fcb0d62fbbab49fec8a0f
         with:
           enable_ccache: false
 
@@ -95,7 +95,7 @@ jobs:
           TARGETS: ${{ needs.determine-files.outputs.need_full_run != 'true' && needs.determine-files.outputs.cpp_changed_files || 'include src tests' }}
         run: |
           set -o pipefail
-          run-clang-tidy -j ${{ steps.nproc.outputs.nproc }} -p "${BUILD_DIR}" -quiet -fix -allow-no-checks ${TARGETS} 2>&1 | tee "${OUTPUT_FILE}"
+          run-clang-tidy -j ${{ steps.nproc.outputs.nproc }} -p "${BUILD_DIR}" -quiet -fix -format -allow-no-checks ${TARGETS} 2>&1 | tee "${OUTPUT_FILE}"
 
       - name: Print filtered clang-tidy errors
         if: ${{ steps.run_clang_tidy.outcome != 'success' }}

.github/workflows/reusable-package.yml

@@ -1,7 +1,7 @@
-# Build Linux packages (DEB and RPM) from pre-built binary artifacts.
-# Discovers which configurations to package from linux.json (configs in
-# "package_configs") and fans out one job per distro. Only linux/amd64 is
-# supported; the runner is hardcoded in the job below.
+# Build Linux packages (DEB and RPM) from pre-built binary artifacts (xrpld and
+# validator-keys). Discovers which configurations to package from linux.json
+# (configs in "package_configs") and fans out one job per distro. Only
+# linux/amd64 is supported; the runner is hardcoded in the job below.
 name: Package
 
 on:
@@ -27,10 +27,10 @@ jobs:
       matrix: ${{ steps.generate.outputs.matrix }}
     steps:
       - name: Checkout repository
-        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
       - name: Set up Python
-        uses: actions/setup-python@ece7cb06caefa5fff74198d8649806c4678c61a1 # v6.3.0
+        uses: actions/setup-python@5fda3b95a4ea91299a34e894583c3862153e4b97 # v7.0.0
         with:
           python-version: "3.13"
 
@@ -45,7 +45,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.generate-matrix.outputs.matrix) }}
-    name: "${{ matrix.artifact_name }}"
+    name: "${{ matrix.xrpld_artifact_name }}"
     permissions:
       contents: read
     runs-on: ["self-hosted", "Linux", "X64", "heavy"]
@@ -54,16 +54,22 @@ jobs:
 
     steps:
       - name: Checkout repository
-        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
-      - name: Download pre-built binary
+      - name: Download pre-built xrpld binary
         uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
         with:
-          name: ${{ matrix.artifact_name }}
+          name: ${{ matrix.xrpld_artifact_name }}
           path: ${{ env.BUILD_DIR }}
 
-      - name: Make binary executable
-        run: chmod +x "${BUILD_DIR}/xrpld"
+      - name: Download pre-built validator-keys binary
+        uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
+        with:
+          name: ${{ matrix.validator_keys_artifact_name }}
+          path: ${{ env.BUILD_DIR }}
+
+      - name: Make binaries executable
+        run: chmod +x "${BUILD_DIR}/xrpld" "${BUILD_DIR}/validator-keys"
 
       - name: Build package
         env:
@@ -73,7 +79,7 @@ jobs:
       - name: Upload package artifact
         uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
         with:
-          name: ${{ matrix.artifact_name }}-pkg
+          name: ${{ matrix.xrpld_artifact_name }}-pkg
           path: |
             ${{ env.BUILD_DIR }}/debbuild/*.deb
             ${{ env.BUILD_DIR }}/debbuild/*.ddeb

.github/workflows/reusable-strategy-matrix.yml

@@ -23,10 +23,10 @@ jobs:
       matrix: ${{ steps.generate.outputs.matrix }}
     steps:
       - name: Checkout repository
-        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
       - name: Set up Python
-        uses: actions/setup-python@ece7cb06caefa5fff74198d8649806c4678c61a1 # v6.3.0
+        uses: actions/setup-python@5fda3b95a4ea91299a34e894583c3862153e4b97 # v7.0.0
         with:
           python-version: "3.13"
 

.github/workflows/reusable-upload-recipe.yml

@@ -40,14 +40,14 @@ defaults:
 jobs:
   upload:
     runs-on: ubuntu-latest
-    container: ghcr.io/xrplf/xrpld/nix-ubuntu:sha-e29b523
+    container: ghcr.io/xrplf/xrpld/nix-ubuntu:sha-fecfc0c
     env:
       REMOTE_NAME: ${{ inputs.remote_name }}
       CONAN_LOGIN_USERNAME_XRPLF: ${{ secrets.remote_username }}
       CONAN_PASSWORD_XRPLF: ${{ secrets.remote_password }}
     steps:
       - name: Checkout repository
-        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
       - name: Generate build version number
         id: version

.github/workflows/upload-conan-deps.yml

@@ -65,10 +65,10 @@ jobs:
         uses: XRPLF/actions/cleanup-workspace@c7d9ce5ebb03c752a354889ecd870cadfc2b1cd4
 
       - name: Checkout repository
-        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
       - name: Prepare runner
-        uses: XRPLF/actions/prepare-runner@64ec3cf3b152b4444638f470bbd6df7a7a30c81c
+        uses: XRPLF/actions/prepare-runner@c00c22ada3bd6bcda48fcb0d62fbbab49fec8a0f
         with:
           enable_ccache: false
 

.gitignore

@@ -81,6 +81,9 @@ DerivedData
 # Python
 __pycache__
 
+# Rust build artifacts.
+target/
+
 # Direnv's directory
 /.direnv
 

.pre-commit-config.yaml

@@ -55,7 +55,7 @@ repos:
         types_or: [c++, c]
 
   - repo: https://github.com/pre-commit/mirrors-clang-format
-    rev: dd18dad857d6133e90bbe478f4f2f22ec0030269 # frozen: v22.1.5
+    rev: f4d7745e17a28aad7eed2f4874ca8d1568c11c4c # frozen: v22.1.8
     hooks:
       - id: clang-format
         args: [--style=file]
@@ -68,7 +68,7 @@ repos:
       - id: gersemi
 
   - repo: https://github.com/rbubley/mirrors-prettier
-    rev: 39e2973981e6d2f9b6c543b0086a2d2393abdc89 # frozen: v3.9.4
+    rev: 9337a74165b178ae2c766f60bee7252a0f06f3e8 # frozen: v3.9.5
     hooks:
       - id: prettier
         args: [--end-of-line=auto]

API-CHANGELOG.md

@@ -42,6 +42,7 @@ This section contains changes targeting a future version.
 
 ### Bugfixes
 
+- `get_aggregate_price`: Duplicate entries in the `oracles` request array are now ignored. [#6586](https://github.com/XRPLF/rippled/pull/6586)
 - Peer Crawler: The `port` field in `overlay.active[]` now consistently returns an integer instead of a string for outbound peers. [#6318](https://github.com/XRPLF/rippled/pull/6318)
 - `ping`: The `ip` field is no longer returned as an empty string for proxied connections without a forwarded-for header. It is now omitted, consistent with the behavior for identified connections. [#6730](https://github.com/XRPLF/rippled/pull/6730)
 - gRPC `GetLedgerDiff`: Fixed error message that incorrectly said "base ledger not validated" when the desired ledger was not validated. [#6730](https://github.com/XRPLF/rippled/pull/6730)
@@ -53,6 +54,8 @@ This section contains changes targeting a future version.
 - `submit`: The `fail_hard` field now returns an error if the value is not a boolean. [#6529](https://github.com/XRPLF/rippled/pull/6529)
 - `subscribe`: The `taker` field in the `books` array now returns `actMalformed` instead of `badIssuer` if the value is not a valid account. [#6529](https://github.com/XRPLF/rippled/pull/6529)
 - Fixed a bug in `Forwarded` HTTP header parsing where the extracted IP address could be incorrect when no comma or semicolon delimiter follows the address. This could cause the server to misidentify a client's IP address when operating behind a reverse proxy. [#6529](https://github.com/XRPLF/rippled/pull/6529)
+- `gateway_balances`: The `account` and `ident` fields now return an `invalidParams` error if the value is not a string, instead of an `internal` error. [#7655](https://github.com/XRPLF/rippled/pull/7655)
+- `account_lines`: The `peer` field now returns an error if the value is not a string. [#7728](https://github.com/XRPLF/rippled/pull/7728)
 
 ## XRP Ledger server version 3.1.0
 

BUILD.md

@@ -4,34 +4,14 @@
 
 ## Minimum Requirements
 
-See [System Requirements](https://xrpl.org/system-requirements.html).
+For the hardware needed to run a node, see
+[System Requirements](https://xrpl.org/system-requirements.html).
 
-Building xrpld generally requires Git, Python, Conan, CMake, and a C++
-compiler.
-
-- [Python](https://www.python.org/downloads/)
-- [Conan](https://conan.io/downloads.html)
-- [CMake](https://cmake.org/download/)
-
-You can verify that the required tools are installed and runnable with:
-
-```bash
-./bin/check-tools.sh
-```
-
-`xrpld` is written in the C++23 dialect. The [tested compiler versions][cpp23-support] are:
-
-| Compiler    | Version         |
-| ----------- | --------------- |
-| GCC         | 15.2            |
-| Clang       | 22              |
-| Apple Clang | 21              |
-| MSVC        | 19.44[^windows] |
+For the software needed to build xrpld, see the
+[environment setup guide](./docs/build/environment.md).
 
 ## Operating Systems
 
-Please see the [environment setup guide](./docs/build/environment.md) for detailed instructions for all platforms.
-
 ### Linux
 
 The Ubuntu Linux distribution has received the highest level of quality
@@ -42,12 +22,13 @@ Our Linux CI tooling is distro-independent and uses a Nix-based environment, so
 ### macOS
 
 Many `xrpld` engineers use macOS for development.
+The minimum supported version is macOS 15 (Sequoia).
+CI testing is done in macOS 26 (Tahoe), but the build defaults `CMAKE_OSX_DEPLOYMENT_TARGET` to 15.
 
 ### Windows
 
-Windows is used by some engineers for development only.
-
-[^windows]: Windows is not recommended for production use.
+Windows is used by some engineers for development only, and is not recommended
+for production use.
 
 ## Steps
 
@@ -72,37 +53,25 @@ releases](https://github.com/XRPLF/rippled/releases).
 
 ### Set Up Conan
 
-After you have a [C++ development environment](./docs/build/environment.md) ready with Git, Python,
-Conan, CMake, and a C++ compiler, you may need to set up your Conan profile.
-
-These instructions assume a basic familiarity with Conan and CMake. If you are
-unfamiliar with Conan, then please read [this crash course](./docs/build/conan.md) or the official
-[Getting Started][conan-getting-started] walkthrough.
-
-#### Profiles
-
-We recommend that you install our Conan profiles:
+Once your [development environment](./docs/build/environment.md) is ready, set
+Conan up for this repository:
 
 ```bash
-conan config install conan/profiles/ -tf $(conan config home)/profiles/
+./conan/init.sh
 ```
 
-You can check your Conan profile by running:
+That installs our [`global.conf`](./conan/global.conf), our Conan
+[profiles](./conan/profiles), and the `xrplf` remote that hosts some of our
+dependencies. It honours `CONAN_HOME` and never deletes an existing Conan home,
+so it is safe to re-run — it only overwrites the files it manages.
 
-```bash
-conan profile show
-```
+> [!TIP]
+> In the [Nix development shell](./docs/build/nix.md#conan-configuration) this is
+> already done for you: the script runs on entry.
 
-If the default profile is not suitable for your environment, you can create a custom profile and pass it to Conan.
-More information on customizing Conan can be found in the [Advanced Conan configuration](./docs/build/advanced_conan.md).
-
-#### Add xrplf remote
-
-Run the following command to add the `xrplf` remote, which hosts some of our dependencies:
-
-```bash
-conan remote add --index 0 --force xrplf https://conan.xrplf.org/repository/conan/
-```
+You can inspect the resulting profile with `conan profile show`. If it is not
+suitable for your environment, create a custom profile and pass it to Conan — see
+[Advanced Conan configuration](./docs/build/advanced_conan.md).
 
 ### Set Up Ccache
 
@@ -245,7 +214,17 @@ cmake --build . --target setup_code_gen  # create venv and install dependencies
 cmake --build . --target code_gen        # regenerate code
 ```
 
-The regenerated files should be committed alongside your changes.
+The same targets are also available as a standalone project, which does not
+need the dependencies to be configured first:
+
+```
+cmake -S cmake/codegen -B build/codegen
+cmake --build build/codegen --target setup_code_gen
+cmake --build build/codegen --target code_gen
+```
+
+The regenerated files should be committed alongside your changes. CI verifies
+that they are up-to-date.
 
 ## Coverage report
 
@@ -257,10 +236,14 @@ which is only enabled when the `coverage` option is set, e.g. with
 Prerequisites for the coverage report:
 
 - [gcovr tool][gcovr] (can be installed e.g. with [pip][python-pip])
-- `gcov` for GCC (installed with the compiler by default) or
-- `llvm-cov` for Clang (installed with the compiler by default)
+- `gcov` for GCC or `llvm-cov` for Clang, usually installed with the compiler
 - `Debug` build type
 
+> [!NOTE]
+> Clang coverage is not available in the [Nix development shell](./docs/build/nix.md#building-xrpld-in-the-nix-shell):
+> its `clang` shells do not ship `llvm-cov`. Use a `gcc` shell instead (`.#gcc`,
+> or `.#gcc-plain` on Linux), which provides a `gcov` matching its compiler.
+
 A coverage report is created when the following steps are completed, in order:
 
 1. `xrpld` binary built with instrumentation data, enabled by the `coverage`
@@ -377,10 +360,14 @@ After any updates or changes to dependencies, you may need to do the following:
 4. [Regenerate lockfile](./docs/build/advanced_conan.md#conan-lockfile).
 5. Re-run [conan install](#build-and-test).
 
+If you are using the Nix development shell, whether prebuilt Conan binaries apply
+depends on your platform — see
+[Prebuilt packages](./docs/build/nix.md#prebuilt-packages).
+
 #### ERROR: Package not resolved
 
 If you're seeing an error like `ERROR: Package 'snappy/1.1.10' not resolved: Unable to find 'snappy/1.1.10#968fef506ff261592ec30c574d4a7809%1756234314.246' in remotes.`,
-please [add `xrplf` remote](#add-xrplf-remote) or re-run `conan export` for [patched recipes](./docs/build/advanced_conan.md#patched-recipes).
+please [set Conan up](#set-up-conan) so the `xrplf` remote is configured, or re-run `conan export` for [patched recipes](./docs/build/advanced_conan.md#patched-recipes).
 
 ### `protobuf/port_def.inc` file not found
 
@@ -400,7 +387,6 @@ For example, if you want to build Debug:
 1. For conan install, pass `--settings build_type=Debug`
 2. For cmake, pass `-DCMAKE_BUILD_TYPE=Debug`
 
-[cpp23-support]: https://en.cppreference.com/w/cpp/compiler_support/23
 [conan-getting-started]: https://docs.conan.io/en/latest/getting_started.html
 [unity-build]: https://en.wikipedia.org/wiki/Unity_build
 [gcovr]: https://gcovr.com/en/stable/getting-started.html

CMakeLists.txt

@@ -13,6 +13,23 @@ if(DEFINED CMAKE_MODULE_PATH)
 endif()
 list(APPEND CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/cmake")
 
+# Must be set before project() because project() consumes it when configuring the compiler and SDK.
+# A user-provided -DCMAKE_OSX_DEPLOYMENT_TARGET still takes precedence.
+#
+# CMAKE_SYSTEM_NAME can't be used before project(), so CMAKE_HOST_SYSTEM_NAME is used instead.
+#
+# When CMAKE_OSX_DEPLOYMENT_TARGET is bumped to >=26.0, FastFloat dependency won't be needed anymore
+if(
+    CMAKE_HOST_SYSTEM_NAME STREQUAL "Darwin"
+    AND NOT DEFINED CMAKE_OSX_DEPLOYMENT_TARGET
+)
+    set(CMAKE_OSX_DEPLOYMENT_TARGET
+        "15.0"
+        CACHE STRING
+        "Minimum macOS deployment version"
+    )
+endif()
+
 project(xrpl)
 set(CMAKE_CXX_EXTENSIONS OFF)
 set(CMAKE_CXX_STANDARD 23)
@@ -87,6 +104,7 @@ include(deps/Boost)
 add_subdirectory(external/antithesis-sdk)
 find_package(date REQUIRED)
 find_package(ed25519 REQUIRED)
+find_package(FastFloat REQUIRED)
 find_package(gRPC REQUIRED)
 find_package(LibArchive REQUIRED)
 find_package(lz4 REQUIRED)
@@ -102,6 +120,7 @@ target_link_libraries(
     xrpl_libs
     INTERFACE
         ed25519::ed25519
+        FastFloat::fast_float
         lz4::lz4
         mpt-crypto::mpt-crypto
         OpenSSL::Crypto
@@ -131,6 +150,10 @@ else()
 endif()
 target_link_libraries(xrpl_libs INTERFACE ${nudb})
 
+if(benchmark)
+    find_package(benchmark REQUIRED)
+endif()
+
 if(coverage)
     include(XrplCov)
 endif()
@@ -138,10 +161,16 @@ endif()
 include(XrplCore)
 include(XrplProtocolAutogen)
 include(XrplInstall)
-include(XrplPackaging)
 include(XrplValidatorKeys)
+# Must come after XrplValidatorKeys: the 'package' target depends on the
+# validator-keys target existing.
+include(XrplPackaging)
 
 if(tests)
     include(CTest)
     add_subdirectory(src/tests/libxrpl)
 endif()
+
+if(benchmark)
+    add_subdirectory(src/benchmarks/libxrpl)
+endif()

CODEOWNERS

@@ -0,0 +1,4 @@
+# By default, anyone can review changes.
+
+# The CI tooling team should review changes to the CI configuration.
+/.github/ @XRPLF/ci-tooling

CONTRIBUTING.md

@@ -83,6 +83,7 @@ If you create new source files, they must be organized as follows:
   `src/libxrpl`.
 - All other non-test files must go under `src/xrpld`.
 - All test source files must go under `src/test`.
+- All benchmark source files must go under `src/benchmarks`.
 
 The source must be formatted according to the style guide below. The easiest
 way to satisfy this is to install the [`pre-commit`](#pre-commit-hooks) hooks,
@@ -347,12 +348,14 @@ run-clang-tidy -p build -allow-no-checks src tests
 ```
 
 This will check all source files in the `src`, `include` and `tests` directories using the compile commands from your `build` directory.
-If you wish to automatically fix whatever clang-tidy finds _and_ is capable of fixing, add `-fix` to the above command:
+If you wish to automatically fix whatever clang-tidy finds _and_ is capable of fixing, add `-fix -format` to the above command:
 
 ```
-run-clang-tidy -p build -quiet -fix -allow-no-checks src tests
+run-clang-tidy -p build -quiet -fix -format -allow-no-checks src tests
 ```
 
+`-format` reformats the fixed code with [`.clang-format`](./.clang-format); without it the fixes are inserted in LLVM style and the `clang-format` hook rewrites them afterwards.
+
 ## Contracts and instrumentation
 
 We are using [Antithesis](https://antithesis.com/) for continuous fuzzing,

bin/check-tools.sh

@@ -30,8 +30,10 @@ missing=()
 checked=0
 
 # check <name> [probe-command...]
-# Runs the probe (default: "<name> --version") quietly. Records <name> as
-# missing if the command is not found or exits non-zero.
+# Runs the probe (default: "<name> --version"), capturing both stdout and
+# stderr, and prints one aligned line: the status, the name, and the first
+# non-blank line of the probe output (its version). Records <name> as missing
+# if the command is not found or exits non-zero.
 check() {
     local name="$1"
     shift
@@ -40,10 +42,11 @@ check() {
         probe=("${name}" --version)
     fi
 
-    echo "Checking ${name}..."
     checked=$((checked + 1))
-    if "${probe[@]}" | head -n 1; then
-        printf '  [ ok ] %s\n' "${name}"
+    local output version
+    if output="$("${probe[@]}" 2>&1)"; then
+        version="$(printf '%s\n' "${output}" | grep -m1 '[^[:space:]]' || true)"
+        printf '  [ ok ] %-20s %s\n' "${name}" "${version}"
     else
         printf '  [MISS] %s\n' "${name}"
         missing+=("${name}")
@@ -85,12 +88,14 @@ if [ "${os}" = "linux" ] || [ "${os}" = "macos" ]; then
     check file
     check less
     check make
-    check netstat which netstat
+    # net-tools netstat reports "net-tools X.Y"; macOS ships BSD netstat with no
+    # version flag, so fall back to a presence marker there.
+    check netstat sh -c 'command -v netstat >/dev/null && { netstat --version 2>&1 | grep -m1 -oE "net-tools [0-9.]+" || echo present; }'
     check ninja
-    check perl
+    check perl perl -e 'print "$^V\n"'
     check pkg-config
     check vim
-    check zip
+    check zip bash -c 'zip --version 2>&1 | grep -m1 -oE "Zip [0-9.]+"'
 
     # These tools are present in our Linux CI images and in local development
     # setups, but not in the macOS CI environment. So check them everywhere

bin/pre-commit/Dockerfile

@@ -0,0 +1,55 @@
+ARG BASE_IMAGE=ubuntu:26.04
+
+FROM ${BASE_IMAGE}
+
+SHELL ["/bin/bash", "-e", "-o", "pipefail", "-c"]
+ENTRYPOINT ["/bin/bash"]
+
+ARG DEBIAN_FRONTEND=noninteractive
+
+RUN <<EOF
+pkgs=()
+pkgs+=(curl)         # Required to install nix.
+pkgs+=(doxygen)      # Needed for Clio's check-doxygen-docs.sh.
+pkgs+=(git)          # Required for prepare-runner.
+pkgs+=(libatomic1)   # Required to run pre-commit provided `node`.
+pkgs+=(python3)      # Python 3 interpreter.
+pkgs+=(python3-pip)  # Package manager for Python applications.
+pkgs+=(xz-utils)     # Required to install nix
+
+apt-get update
+apt-get install -y --no-install-recommends "${pkgs[@]}"
+apt-get clean
+rm -rf /var/lib/apt/lists/*
+EOF
+
+ARG PRE_COMMIT_VERSION=4.6.0
+RUN pip install --no-cache --break-system-packages \
+    pre-commit==${PRE_COMMIT_VERSION}
+
+RUN sh <(curl --proto '=https' --tlsv1.2 -L https://nixos.org/nix/install) --daemon --yes
+
+# Add nix to PATH and set NIX environment variables,
+# so nix is available in all shells including non-interactive shells (e.g., GitHub Actions).
+ENV PATH="/nix/var/nix/profiles/default/bin:${PATH}"
+ENV NIX_PROFILES="/nix/var/nix/profiles/default"
+ENV NIX_SSL_CERT_FILE="/nix/var/nix/profiles/default/etc/ssl/certs/ca-bundle.crt"
+
+# Verify nix installation
+RUN nix --version
+
+ENV RUSTUP_HOME="/opt/rust/rustup"
+ENV CARGO_HOME="/opt/rust/cargo"
+ENV PATH="/opt/rust/cargo/bin:${PATH}"
+
+WORKDIR /tmp
+COPY rust-toolchain.toml /tmp/rust-toolchain.toml
+RUN <<EOF
+curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs \
+    | sh -s -- -y --no-modify-path --profile minimal --default-toolchain none
+rustup toolchain install
+rustup show
+cargo fmt --version
+EOF
+
+WORKDIR /

bin/pre-commit/clang_tidy_check.py

@@ -144,7 +144,11 @@ def main():
             + files
         )
         canonicalize_fix_paths(Path(fixes_dir))
-        applied = subprocess.run([clang_apply_replacements, fixes_dir])
+        # `FormatStyle` in .clang-tidy does not reach this path,
+        # so ask for the repository style here.
+        applied = subprocess.run(
+            [clang_apply_replacements, "--format", "--style=file", fixes_dir]
+        )
 
     return result.returncode or applied.returncode
 

cfg/xrpld-example.cfg

@@ -488,6 +488,17 @@
 #   Must be a number between 100 and 1000, defaults to 250
 #
 #
+# [max_subscriptions_per_connection]
+#
+#   Maximum number of account, real-time account, and account-history
+#   subscriptions a single client connection may hold at once. Bounds the
+#   per-connection state torn down when the connection disconnects. Book
+#   subscriptions are tracked separately and are not counted here.
+#
+#   Defaults to 100000 if not set; large enough for legitimate power users
+#   such as block explorers.
+#
+#
 # [overlay]
 #
 #   Controls settings related to the peer to peer overlay.
@@ -538,6 +549,45 @@
 #       only be used for local testing and debugging. Do not disable
 #       on mainnet.
 #
+#   max_untrusted_count = <number>
+#
+#       The number of manifests the server keeps for validators it does not
+#       list, and the number it sends and processes in a single peer protocol
+#       message. Once the server holds this many, a manifest for a new
+#       unlisted validator is rejected, so peer gossip cannot grow the cache
+#       without end.
+#
+#       This option can take any value between 50 and 1000, inclusive. If
+#       the option is not present the server uses its built-in value.
+#
+#       The current default (which is subject to change) is 300.
+#
+#   max_trusted_count = <number>
+#
+#       The number of manifests for listed validators to allow for when
+#       sizing peer protocol messages. Manifests for listed validators are
+#       never dropped, whether sending or receiving, because doing so would
+#       delay a validator key change reaching this server. Set this above the
+#       number of validators the server lists.
+#
+#       Together the two counts above set the largest manifest message the
+#       server accepts: bigger messages are discarded without reading them,
+#       and without penalising the sender. Raising either means the server
+#       accepts and sends bigger messages than a peer using the defaults, and
+#       those peers will discard what this server sends. Lowering either below
+#       what peers send makes this server discard their manifest messages,
+#       which it does without recording anything.
+#
+#       This option can take any value between 50 and 1000, inclusive. If
+#       the option is not present the server uses its built-in value.
+#
+#       The current default (which is subject to change) is 300.
+#
+#       NOTE: These two options (max_untrusted_count and max_trusted_count)
+#       are transitional. They exist to bound manifest-message size and cache
+#       growth during the network upgrade. They may be removed in a future
+#       release once the fleet has upgraded, and should not be relied upon as
+#       stable configuration.
 #
 # [transaction_queue] EXPERIMENTAL
 #

cmake/CompilationEnv.cmake

@@ -29,6 +29,27 @@ if(CMAKE_GENERATOR STREQUAL "Xcode")
     set(is_xcode TRUE)
 endif()
 
+# --------------------------------------------------------------------
+# Nix toolchain detection
+# --------------------------------------------------------------------
+# True when the C++ compiler resolves into the Nix store. CMAKE_CXX_COMPILER may
+# be referenced through a symlink outside the store (a Nix profile, a /usr/bin
+# alternative, ...), so resolve the real path before matching.
+set(is_nix_compiler FALSE)
+get_filename_component(_cxx_real "${CMAKE_CXX_COMPILER}" REALPATH)
+if(_cxx_real MATCHES "^/nix/store/")
+    set(is_nix_compiler TRUE)
+endif()
+unset(_cxx_real)
+
+# True inside the Nix CI Docker image, identified by the /nix/ci-env tree it
+# ships (see nix/docker/Dockerfile). The dev shell and bare systems don't have
+# it, so it distinguishes the CI image from other Nix-compiler environments.
+set(is_ci_image FALSE)
+if(EXISTS "/nix/ci-env/bin")
+    set(is_ci_image TRUE)
+endif()
+
 # --------------------------------------------------------------------
 # Operating system detection
 # --------------------------------------------------------------------

cmake/PatchNixBinary.cmake

@@ -1,26 +1,38 @@
 #[===================================================================[
    Patch executables to run in non-Nix environments.
 
-   The Nix-based CI image links binaries against an ELF interpreter (loader)
+   The Nix toolchain links binaries against an ELF interpreter (loader)
    that lives in the Nix store, so the resulting binaries don't run elsewhere
-   (including once installed from the .deb package). `patch_nix_binary` adds a
-   POST_BUILD step that resets the interpreter to the system default loader and
-   drops the rpath.
+   (including once installed from the .deb package). `patch_nix_binary` resets
+   the interpreter to the system default loader and drops the rpath, once the
+   binary has been linked.
 
-   This is only active inside the Nix-based image, detected by the presence of
-   /tmp/loader-path.sh (shipped by that image, resolves the default loader). It
-   is skipped for sanitizer builds, whose runtime libraries are resolved through
-   the rpath. Everywhere else `patch_nix_binary` is a no-op.
+   This runs by default for Nix-toolchain builds (determined by whether the compiler resolves under /nix/store/).
+   Those builds are where binaries get a Nix-store loader.
+   It is opted out of by setting the XRPLD_NO_PATCH_NIX_BINARY environment variable —
+   the plain Nix dev shells set it, since their binaries link a newer glibc
+   and must not be retargeted to the system loader.
+
+   Non-Nix builds (a system compiler, already using the system loader) and sanitizer builds
+   (runtime libraries resolved through the rpath) are skipped too.
+   Everywhere else `patch_nix_binary` is a no-op.
+
+   The default loader is resolved by bin/default-loader-path.sh.
 #]===================================================================]
 
 include_guard(GLOBAL)
 
 include(CompilationEnv)
 
-# Provided by the Nix-based CI image; prints the system default ELF loader path.
-set(_loader_path_script "/tmp/loader-path.sh")
+# Resolves the system default ELF loader path for the current architecture.
+set(_loader_path_script "${CMAKE_SOURCE_DIR}/bin/default-loader-path.sh")
 
-if(is_linux AND NOT SANITIZERS_ENABLED AND EXISTS "${_loader_path_script}")
+if(
+    is_linux
+    AND NOT SANITIZERS_ENABLED
+    AND is_nix_compiler
+    AND NOT DEFINED ENV{XRPLD_NO_PATCH_NIX_BINARY}
+)
     execute_process(
         COMMAND "${_loader_path_script}"
         OUTPUT_VARIABLE DEFAULT_LOADER_PATH
@@ -41,13 +53,38 @@ function(patch_nix_binary target)
     if(NOT PATCH_NIX_BINARIES)
         return()
     endif()
-    add_custom_command(
-        TARGET ${target}
-        POST_BUILD
-        COMMAND
-            "${PATCHELF_COMMAND}" --set-interpreter "${DEFAULT_LOADER_PATH}"
-            --remove-rpath "$<TARGET_FILE:${target}>"
-        COMMENT "Patching ${target}: set default loader, remove rpath"
-        VERBATIM
+
+    set(patch_command
+        "${PATCHELF_COMMAND}"
+        --set-interpreter
+        "${DEFAULT_LOADER_PATH}"
+        --remove-rpath
+        "$<TARGET_FILE:${target}>"
     )
+    set(comment "Patching ${target}: set default loader, remove rpath")
+
+    # POST_BUILD is the cheap way to do this: it runs only when the binary is
+    # relinked. It is also only available in the directory that defined the
+    # target, so for a target from elsewhere (e.g. a FetchContent subproject)
+    # fall back to a custom target that runs after the binary is linked. That
+    # one runs on every build, which is harmless because patchelf is idempotent.
+    get_target_property(target_source_dir ${target} SOURCE_DIR)
+    if("${target_source_dir}" STREQUAL "${CMAKE_CURRENT_SOURCE_DIR}")
+        add_custom_command(
+            TARGET ${target}
+            POST_BUILD
+            COMMAND ${patch_command}
+            COMMENT "${comment}"
+            VERBATIM
+        )
+    else()
+        add_custom_target(
+            ${target}-patch-nix
+            ALL
+            COMMAND ${patch_command}
+            COMMENT "${comment}"
+            VERBATIM
+        )
+        add_dependencies(${target}-patch-nix ${target})
+    endif()
 endfunction()

cmake/XrplAddBenchmark.cmake

@@ -0,0 +1,38 @@
+include_guard()
+
+include(isolate_headers)
+
+# Define a benchmark executable for the module `name`.
+#
+# This follows the same general pattern as other build helpers in this repo
+# (e.g. `add_module`): create a target and isolate headers, but here the target
+# is a benchmark executable and no `add_test(...)` is registered.
+#
+# `isolate_headers` exposes only `${CMAKE_CURRENT_SOURCE_DIR}/${name}` on the
+# include path, rooted at `src`, so a benchmark's own headers are reached as
+# `<benchmarks/.../${name}/...>` and nothing else in the tree leaks in.
+function(xrpl_add_benchmark name)
+    set(target ${PROJECT_NAME}.bench.${name})
+
+    file(
+        GLOB_RECURSE sources
+        CONFIGURE_DEPENDS
+        "${CMAKE_CURRENT_SOURCE_DIR}/${name}/*.cpp"
+        "${CMAKE_CURRENT_SOURCE_DIR}/${name}.cpp"
+    )
+    add_executable(${target} ${ARGN} ${sources})
+
+    # Benchmark sources register cases through Google Benchmark's static
+    # registrars (anonymous-namespace lambdas). Merging several such files into
+    # one unity translation unit collides those internal-linkage entities, so
+    # keep benchmarks out of the unity build - mirroring xrpl.libpb in
+    # XrplCore.cmake. Each file compiles fine on its own.
+    set_target_properties(${target} PROPERTIES UNITY_BUILD OFF)
+
+    isolate_headers(
+        ${target}
+        "${CMAKE_SOURCE_DIR}/src"
+        "${CMAKE_CURRENT_SOURCE_DIR}/${name}"
+        PRIVATE
+    )
+endfunction()

cmake/XrplCompiler.cmake

@@ -171,9 +171,8 @@ else()
     # Clang wrapper supplies those paths itself (via -nostdinc++), so at compile time the
     # flag is unused -> Clang errors under our -Werror. At link time the flag IS consumed
     # (it selects the C++ runtime), so we move it there instead of dropping it entirely.
-    get_filename_component(_cxx_real "${CMAKE_CXX_COMPILER}" REALPATH)
     if(
-        _cxx_real MATCHES "^/nix/store/"
+        is_nix_compiler
         AND is_linux
         AND is_clang
         AND CMAKE_CXX_FLAGS MATCHES "stdlib=libstdc"
@@ -267,10 +266,50 @@ elseif(use_lld)
     )
     if("${LD_VERSION}" MATCHES "LLD")
         target_link_libraries(common INTERFACE -fuse-ld=lld)
+        # remembered for the linker flag probe below
+        set(fuse_ld_flag "-fuse-ld=lld")
     endif()
     unset(LD_VERSION)
 endif()
 
+# Linker warnings are errors where we control the toolchain and the dependencies: CI and the Nix dev shell.
+# On non-Nix macOS we suppress the deployment target warning: an old Conan profile may not pin os.version.
+# Only the new Apple linker understands the flag, so probe the actual linker (lld may be selected above).
+if(is_macos OR is_linux)
+    if(is_ci OR is_nix_compiler)
+        if(is_macos)
+            set(fatal_warnings_flag "-Wl,-fatal_warnings")
+        else()
+            set(fatal_warnings_flag "-Wl,--fatal-warnings")
+        endif()
+        message(
+            STATUS
+            "Treating all linker warnings as errors (${fatal_warnings_flag})"
+        )
+        target_link_options(common INTERFACE "${fatal_warnings_flag}")
+        unset(fatal_warnings_flag)
+    elseif(is_macos)
+        set(silence_flag "-Wl,-deployment_target_mismatches,suppress")
+        set(probe_flags ${fuse_ld_flag} "${silence_flag}")
+        include(CheckLinkerFlag)
+        check_linker_flag(
+            CXX
+            "${probe_flags}"
+            have_deployment_target_mismatches
+        )
+        if(have_deployment_target_mismatches)
+            message(
+                STATUS
+                "Silencing macOS deployment target mismatch warnings (${silence_flag})"
+            )
+            target_link_options(common INTERFACE "${silence_flag}")
+        endif()
+        unset(probe_flags)
+        unset(silence_flag)
+    endif()
+endif()
+unset(fuse_ld_flag)
+
 if(assert)
     foreach(var_ CMAKE_C_FLAGS_RELEASE CMAKE_CXX_FLAGS_RELEASE)
         string(REGEX REPLACE "[-/]DNDEBUG" "" ${var_} "${${var_}}")

cmake/XrplCore.cmake

@@ -133,6 +133,12 @@ target_link_libraries(
 add_module(xrpl resource)
 target_link_libraries(xrpl.libxrpl.resource PUBLIC xrpl.libxrpl.protocol)
 
+add_module(xrpl peerfinder)
+target_link_libraries(
+    xrpl.libxrpl.peerfinder
+    PUBLIC xrpl.libxrpl.basics xrpl.libxrpl.protocol
+)
+
 # Level 08
 add_module(xrpl net)
 target_link_libraries(
@@ -201,6 +207,16 @@ target_link_libraries(
 add_module(xrpl tx)
 target_link_libraries(xrpl.libxrpl.tx PUBLIC xrpl.libxrpl.ledger)
 
+add_module(xrpl consensus)
+target_link_libraries(
+    xrpl.libxrpl.consensus
+    PUBLIC
+        xrpl.libxrpl.basics
+        xrpl.libxrpl.json
+        xrpl.libxrpl.protocol
+        xrpl.libxrpl.ledger
+)
+
 add_library(xrpl.libxrpl)
 set_target_properties(xrpl.libxrpl PROPERTIES OUTPUT_NAME xrpl)
 
@@ -220,6 +236,7 @@ target_link_modules(
     beast
     conditions
     config
+    consensus
     core
     crypto
     git
@@ -227,6 +244,7 @@ target_link_modules(
     ledger
     net
     nodestore
+    peerfinder
     protocol
     protocol_autogen
     rdb

cmake/XrplCov.cmake

@@ -44,6 +44,7 @@ setup_target_for_coverage_gcovr(
     EXCLUDE
         "src/test"
         "src/tests"
+        "src/benchmarks"
         "include/xrpl/beast/test"
         "include/xrpl/beast/unit_test"
         "${CMAKE_BINARY_DIR}/pb-xrpl.libpb"

cmake/XrplPackaging.cmake

@@ -25,6 +25,19 @@ if(NOT (RPMBUILD_EXECUTABLE OR DPKG_BUILDPACKAGE_EXECUTABLE))
     return()
 endif()
 
+if(NOT TARGET xrpld)
+    message(STATUS "xrpld=ON is required; 'package' target not available")
+    return()
+endif()
+
+if(NOT TARGET validator-keys)
+    message(
+        STATUS
+        "validator_keys=ON is required; 'package' target not available"
+    )
+    return()
+endif()
+
 set(package_env
     SRC_DIR=${CMAKE_SOURCE_DIR}
     BUILD_DIR=${CMAKE_BINARY_DIR}
@@ -37,7 +50,7 @@ add_custom_target(
         ${CMAKE_COMMAND} -E env ${package_env}
         ${CMAKE_SOURCE_DIR}/package/build_pkg.sh
     WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
-    DEPENDS xrpld
+    DEPENDS xrpld validator-keys
     COMMENT "Building Linux package (deb/rpm inferred from host tooling)"
     VERBATIM
 )

cmake/XrplProtocolAutogen.cmake

@@ -2,21 +2,22 @@
    Protocol Autogen - Code generation for protocol wrapper classes
 #]===================================================================]
 
+# The repository root, derived from the location of this file rather than from
+# the including project, so that the targets below can also be offered on their
+# own by cmake/codegen/CMakeLists.txt.
+get_filename_component(XRPL_ROOT "${CMAKE_CURRENT_LIST_DIR}/.." ABSOLUTE)
+
 set(CODEGEN_VENV_DIR
-    "${CMAKE_CURRENT_SOURCE_DIR}/.venv"
+    "${XRPL_ROOT}/.venv"
     CACHE PATH
     "Path to a Python virtual environment for code generation. A venv will be created here by setup_code_gen and used to run generation scripts."
 )
 
 # Directory paths
-set(MACRO_DIR "${CMAKE_CURRENT_SOURCE_DIR}/include/xrpl/protocol/detail")
-set(AUTOGEN_HEADER_DIR
-    "${CMAKE_CURRENT_SOURCE_DIR}/include/xrpl/protocol_autogen"
-)
-set(AUTOGEN_TEST_DIR
-    "${CMAKE_CURRENT_SOURCE_DIR}/src/tests/libxrpl/protocol_autogen"
-)
-set(SCRIPTS_DIR "${CMAKE_CURRENT_SOURCE_DIR}/cmake/scripts/codegen")
+set(MACRO_DIR "${XRPL_ROOT}/include/xrpl/protocol/detail")
+set(AUTOGEN_HEADER_DIR "${XRPL_ROOT}/include/xrpl/protocol_autogen")
+set(AUTOGEN_TEST_DIR "${XRPL_ROOT}/src/tests/libxrpl/protocol_autogen")
+set(SCRIPTS_DIR "${XRPL_ROOT}/cmake/scripts/codegen")
 
 # Input macro files
 set(TRANSACTIONS_MACRO "${MACRO_DIR}/transactions.macro")
@@ -114,14 +115,14 @@ if(CODEGEN_VENV_DIR)
         setup_code_gen
         COMMAND ${Python3_EXECUTABLE} -m venv "${CODEGEN_VENV_DIR}"
         COMMAND ${CODEGEN_PYTHON} -m pip install -r "${REQUIREMENTS_FILE}"
-        WORKING_DIRECTORY "${CMAKE_CURRENT_SOURCE_DIR}"
+        WORKING_DIRECTORY "${XRPL_ROOT}"
         COMMENT "Creating venv and installing code generation dependencies..."
     )
 else()
     add_custom_target(
         setup_code_gen
         COMMAND ${Python3_EXECUTABLE} -m pip install -r "${REQUIREMENTS_FILE}"
-        WORKING_DIRECTORY "${CMAKE_CURRENT_SOURCE_DIR}"
+        WORKING_DIRECTORY "${XRPL_ROOT}"
         COMMENT "Installing code generation dependencies..."
     )
 endif()
@@ -139,8 +140,8 @@ add_custom_target(
         -DSFIELDS_MACRO=${SFIELDS_MACRO}
         -DAUTOGEN_HEADER_DIR=${AUTOGEN_HEADER_DIR}
         -DAUTOGEN_TEST_DIR=${AUTOGEN_TEST_DIR} -P
-        "${CMAKE_CURRENT_SOURCE_DIR}/cmake/XrplProtocolAutogenRun.cmake"
-    WORKING_DIRECTORY "${CMAKE_CURRENT_SOURCE_DIR}"
+        "${CMAKE_CURRENT_LIST_DIR}/XrplProtocolAutogenRun.cmake"
+    WORKING_DIRECTORY "${XRPL_ROOT}"
     COMMENT "Running protocol code generation..."
     SOURCES ${ALL_INPUT_FILES}
 )

cmake/XrplSanity.cmake

@@ -36,6 +36,19 @@ elseif(is_gcc)
     endif()
 endif()
 
+# A Nix compiler is only meant to be used from a managed environment: the xrpld
+# dev shell (which exports XRPL_DEVSHELL) or the CI image. Using one from a bare
+# shell usually means a leaked toolchain (picked up via PATH or a Conan profile)
+# and leads to confusing breakage, so fail early with guidance.
+if(is_nix_compiler AND NOT is_ci_image AND NOT DEFINED ENV{XRPL_DEVSHELL})
+    message(
+        FATAL_ERROR
+        "A Nix compiler (${CMAKE_CXX_COMPILER}) is being used outside the xrpld "
+        "dev shell. Enter it with `nix develop` (see docs/build/nix.md) before "
+        "configuring the build."
+    )
+endif()
+
 # check for in-source build and fail
 if("${CMAKE_CURRENT_SOURCE_DIR}" STREQUAL "${CMAKE_BINARY_DIR}")
     message(

cmake/XrplSettings.cmake

@@ -30,6 +30,8 @@ if(tests)
     endif()
 endif()
 
+option(benchmark "Build benchmarks" ON)
+
 # Enabled by default so every header is compiled on its own as the main file of
 # its own compile_commands.json entry - this is what lets clang-tidy (and clangd
 # and IDEs) analyse a header's own includes directly. The per-header objects are

cmake/XrplValidatorKeys.cmake

@@ -5,22 +5,39 @@ option(
 )
 
 if(validator_keys)
-    git_branch(current_branch)
-    # default to tracking VK master branch unless we are on release
-    if(NOT (current_branch STREQUAL "release"))
-        set(current_branch "master")
-    endif()
-    message(STATUS "Tracking ValidatorKeys branch: ${current_branch}")
+    # Own the install destination below rather than relying on another module
+    # having pulled this in first.
+    include(GNUInstallDirs)
+
+    # Pinned to an exact commit, not a branch: the tool ships inside our
+    # packages, so the same xrpld version must always package the same
+    # validator-keys. Bump this deliberately.
+    set(validator_keys_commit "4c0fb75eec9601c711645998c904507e87e910ae")
+    message(STATUS "Using ValidatorKeys commit: ${validator_keys_commit}")
 
     FetchContent_Declare(
         validator_keys
         GIT_REPOSITORY https://github.com/ripple/validator-keys-tool.git
-        GIT_TAG "${current_branch}"
+        GIT_TAG "${validator_keys_commit}"
     )
     FetchContent_MakeAvailable(validator_keys)
+    # The tool's own CMakeLists excludes the target from 'all' when it is built
+    # as a subproject. Undo that, so validator_keys=ON really does build it.
     set_target_properties(
         validator-keys
-        PROPERTIES RUNTIME_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}"
+        PROPERTIES
+            RUNTIME_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}"
+            EXCLUDE_FROM_ALL OFF
+            EXCLUDE_FROM_DEFAULT_BUILD OFF
+    )
+    # We ship this binary, so like xrpld it must not keep the Nix store's ELF
+    # loader, or it cannot run on the target distro at all.
+    patch_nix_binary(validator-keys)
+
+    configure_file(
+        "${validator_keys_SOURCE_DIR}/LICENSE"
+        "${CMAKE_BINARY_DIR}/validator-keys-LICENSE"
+        COPYONLY
     )
     install(TARGETS validator-keys RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR})
 endif()

cmake/codegen/CMakeLists.txt

@@ -0,0 +1,21 @@
+#[===================================================================[
+   Protocol Autogen - Standalone project
+
+   Exposes the 'setup_code_gen' and 'code_gen' targets on their own, without
+   configuring the rest of xrpl. Code generation is pure Python, so this needs
+   neither the dependencies nor a compiler, which makes it usable in CI and by
+   contributors who only want to regenerate the protocol wrapper classes:
+
+     cmake -S cmake/codegen -B build/codegen
+     cmake --build build/codegen --target setup_code_gen
+     cmake --build build/codegen --target code_gen
+
+   The targets are identical to the ones offered by the top-level build, since
+   both come from cmake/XrplProtocolAutogen.cmake.
+#]===================================================================]
+
+cmake_minimum_required(VERSION 3.16)
+
+project(xrpl_codegen LANGUAGES NONE)
+
+include("${CMAKE_CURRENT_LIST_DIR}/../XrplProtocolAutogen.cmake")

cmake/scripts/codegen/templates/LedgerEntry.h.mako

@@ -2,6 +2,9 @@
 #pragma once
 
 #include <xrpl/protocol/STLedgerEntry.h>
+% if any(field.get('stiSuffix') == 'NUMBER' for field in fields):
+#include <xrpl/protocol/STNumber.h>  // IWYU pragma: keep
+% endif
 #include <xrpl/protocol/STParsedJSON.h>
 #include <xrpl/protocol/jss.h>
 #include <xrpl/protocol_autogen/LedgerEntryBase.h>

conan.lock

@@ -10,22 +10,24 @@
         "rocksdb/10.5.1#4a197eca381a3e5ae8adf8cffa5aacd0%1782392413.075713",
         "re2/20251105#8579cfd0bda4daf0683f9e3898f964b4%1782392402.431897",
         "protobuf/6.33.5#ff253ead763bd8d9904a52979cd21e81%1782392410.233933",
-        "openssl/3.6.3#1163d4ddc603907084d08a6a0c6e580f%1782307150.583886",
+        "openssl/3.6.3#f806de8933e3bf6f01016c6a888cee2e%1783945160.863288",
         "nudb/2.0.9#11149c73f8f2baff9a0198fe25971fc7%1782392402.297166",
-        "mpt-crypto/0.4.0-rc2#a580f2f9ad0e795de696aa62d54fb9af%1782425834.488828",
+        "mpt-crypto/1.0.2#b313cef0c1a493eb970ad185b2e9bab7%1784285108.866483",
         "lz4/1.10.0#982d9b673900f665a1da109e09c17cab%1782392402.164188",
         "libiconv/1.17#9923bc6dc6f106646d6967e0039a5ada%1782392792.775744",
         "libbacktrace/cci.20210118#a7691bfccd8caaf66309df196790a5a1%1782392402.420732",
         "libarchive/3.8.7#c446109bd1f1d8ba7936c94189bc50e6%1782392403.066892",
         "jemalloc/5.3.1#1fc58d55316041f10fbc1e8a2eae632a%1776700028.228",
         "gtest/1.17.0#5224b3b3ff3b4ce1133cbdd27d53ee7d%1782392402.791979",
-        "grpc/1.81.1#5217e6ef0544c42b46f4af35d5e7f649%1782307148.845616",
+        "grpc/1.81.1#f729f6d75992d20f9c72828e9142d62f%1783945160.094135",
+        "fast_float/8.2.10#f6f28d6bb22112078e7dbda611caf681%1782494504.298",
         "ed25519/2015.03#ae761bdc52730a843f0809bdf6c1b1f6%1782307148.15562",
         "date/3.0.4#862e11e80030356b53c2c38599ceb32b%1782392402.538492",
         "c-ares/1.34.6#545240bb1c40e2cacd4362d6b8967650%1782392402.681654",
         "bzip2/1.0.8#c470882369c2d95c5c77e970c0c7e321%1782392402.296732",
         "boost/1.91.0#ea540ca2133d831b560036aa24dece3c%1782392419.475605",
-        "abseil/20250127.0#bb0baf1f362bc4a725a24eddd419b8f7%1782307147.395833"
+        "benchmark/1.9.5#b885dc73ad67b40a55d45684d1c88ad1%1782736613.864841",
+        "abseil/20250127.0#9ef01c1451a8340f9022e46238c0fbb6%1783945159.651047"
     ],
     "build_requires": [
         "zlib/1.3.2#1cb806da49011867778ffb6ac7190fcb%1782392402.122708",
@@ -33,12 +35,12 @@
         "protobuf/6.33.5#ff253ead763bd8d9904a52979cd21e81%1782392410.233933",
         "nasm/2.16.01#31e26f2ee3c4346ecd347911bd126904%1782395690.33162",
         "msys2/cci.latest#d22fe7b2808f5fd34d0a7923ace9c54f%1770657326.649",
-        "m4/1.4.19#34c4bbc3eeebe98ca6edf2f52d602e7d%1777282960.259",
+        "m4/1.4.19#1727f439cf74e83826ec96d0b4904eee%1784541921.659",
         "cmake/4.3.3#840cf00ea09777e05c2050a50a82c722%1782392418.696091",
         "b2/5.4.2#ffd6084a119587e70f11cd45d1a386e2%1782392402.624226",
         "automake/1.16.5#b91b7c384c3deaa9d535be02da14d04f%1755524470.56",
         "autoconf/2.71#51077f068e61700d65bb05541ea1e4b0%1731054366.86",
-        "abseil/20250127.0#bb0baf1f362bc4a725a24eddd419b8f7%1782307147.395833"
+        "abseil/20250127.0#9ef01c1451a8340f9022e46238c0fbb6%1783945159.651047"
     ],
     "python_requires": [],
     "overrides": {

conan/init.sh

@@ -0,0 +1,21 @@
+#!/usr/bin/env bash
+# Install our Conan configuration, profiles and the xrplf remote into CONAN_HOME.
+# Safe to re-run; never deletes the Conan home.
+
+set -euo pipefail
+
+SCRIPT_DIR="$(cd -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd)"
+CONAN_DIR="$(conan config home)"
+
+echo "Installing Conan configuration into ${CONAN_DIR}"
+conan config install "${SCRIPT_DIR}/global.conf"
+conan config install "${SCRIPT_DIR}/profiles" -tf "${CONAN_DIR}/profiles"
+# This script manages these files, so make them read-only - Conan does not
+# preserve the source mode. Only the files: the directories must stay writable
+# for `conan config install` to replace them.
+chmod a-w "${CONAN_DIR}/global.conf"
+find "${CONAN_DIR}/profiles" -type f -exec chmod a-w {} +
+
+echo "Adding the xrplf Conan remote"
+# --index 0: our patched recipes must win over Conan Center.
+conan remote add --index 0 --force xrplf https://conan.xrplf.org/repository/conan/

conan/profiles/default

@@ -1,9 +1,13 @@
 {% set os = detect_api.detect_os() %}
 {% set arch = detect_api.detect_arch() %}
 {% set compiler, version, compiler_exe = detect_api.detect_default_compiler() %}
-{% set compiler_version = version %}
-{% if os == "Linux" %}
 {% set compiler_version = detect_api.default_compiler_version(compiler, version) %}
+{% if os == "Macos" %}
+{# Minimum macOS the dependencies target. #}
+{# Without this, Conan builds each dependency against the (possibly newer) host SDK, so the #}
+{# dependency objects target a newer macOS than the binary and the linker warns. #}
+{# Keep at or below CMAKE_OSX_DEPLOYMENT_TARGET in CMakeLists.txt. #}
+{% set min_macos_version = "15.0" %}
 {% endif %}
 
 [settings]
@@ -18,10 +22,39 @@ compiler.runtime=static
 {% else %}
 compiler.libcxx={{ detect_api.detect_libcxx(compiler, version, compiler_exe) }}
 {% endif %}
+{% if os == "Macos" %}
+os.version={{ min_macos_version }}
+{% endif %}
 
 [conf]
+{# The Boost recipe builds with b2, which doesn't use Conan's toolchain files. #}
+{# Instead it hand-rolls the compiler for user-config.jam, #}
+{# and its fallback probes a version-suffixed binary (e.g. `g++-15`) before plain `g++`. #}
+{# Inside the Nix shell the wrapper only provides `g++`/`gcc` (no `-15` suffix), #}
+{# so on a host that also has a system `g++-15` the probe escapes Nix #}
+{# and picks the system compiler, which is mismatched with the Nix libraries #}
+{# and breaks the build (e.g. Boost.Stacktrace link checks fail). #}
+{# Pinning the executables here short-circuits that probe so Boost (and the rest of the toolchain) #}
+{# resolve the same compiler. #}
+{# Not part of the package ID, so binaries stay shareable. #}
+{% if os != "Windows" %}
+{% set cc_exe  = {"gcc": "gcc",  "clang": "clang",   "apple-clang": "clang"}.get(compiler) %}
+{% set cxx_exe = {"gcc": "g++",  "clang": "clang++", "apple-clang": "clang++"}.get(compiler) %}
+tools.build:compiler_executables={'c':'{{ cc_exe }}','cpp':'{{ cxx_exe }}'}
+{% endif %}
+
 {# By default, Conan tries to reuse binaries built with different cppstd versions. #}
 {# We want to avoid that to improve reproduceability, so we add the cppstd version to the package ID. #}
 {# More info: https://docs.conan.io/2/reference/extensions/binary_compatibility.html #}
 user.package:cppstd_version=23
 tools.info.package_id:confs+=["user.package:cppstd_version"]
+
+{% if os == "Macos" %}
+[buildenv]
+{# os.version adds -mmacosx-version-min to compiler command lines, #}
+{# but Boost.Context's b2 assembly (.S) rule ignores it, #}
+{# so those objects keep the host SDK version and still warn at link time. #}
+{# clang's assembler honors this env var regardless, pinning them. #}
+{# Scoped to boost/* since it is the only gap. #}
+boost/*:MACOSX_DEPLOYMENT_TARGET={{ min_macos_version }}
+{% endif %}

conanfile.py

@@ -15,6 +15,7 @@ class Xrpl(ConanFile):
     settings = "os", "compiler", "build_type", "arch"
     options = {
         "assertions": [True, False],
+        "benchmark": [True, False],
         "coverage": [True, False],
         "fPIC": [True, False],
         "jemalloc": [True, False],
@@ -28,6 +29,7 @@ class Xrpl(ConanFile):
 
     requires = [
         "ed25519/2015.03",
+        "fast_float/8.2.10",
         "grpc/1.81.1",
         "libarchive/3.8.7",
         "nudb/2.0.9",
@@ -46,6 +48,7 @@ class Xrpl(ConanFile):
 
     default_options = {
         "assertions": False,
+        "benchmark": True,
         "coverage": False,
         "fPIC": True,
         "jemalloc": False,
@@ -129,12 +132,14 @@ class Xrpl(ConanFile):
             self.options["boost"].without_cobalt = True
 
     def requirements(self):
+        if self.options.benchmark:
+            self.requires("benchmark/1.9.5")
         self.requires("boost/1.91.0", force=True, transitive_headers=True)
         self.requires("date/3.0.4", transitive_headers=True)
         if self.options.jemalloc:
             self.requires("jemalloc/5.3.1")
         self.requires("lz4/1.10.0", force=True)
-        self.requires("mpt-crypto/0.4.0-rc2", transitive_headers=True)
+        self.requires("mpt-crypto/1.0.2", transitive_headers=True)
         self.requires("protobuf/6.33.5", force=True)
         if self.options.rocksdb:
             self.requires("rocksdb/10.5.1")
@@ -162,6 +167,7 @@ class Xrpl(ConanFile):
     def generate(self):
         tc = CMakeToolchain(self)
         tc.variables["tests"] = self.options.tests
+        tc.variables["benchmark"] = self.options.benchmark
         tc.variables["assert"] = self.options.assertions
         tc.variables["coverage"] = self.options.coverage
         tc.variables["jemalloc"] = self.options.jemalloc
@@ -206,6 +212,7 @@ class Xrpl(ConanFile):
             "boost::thread",
             "date::date",
             "ed25519::ed25519",
+            "fast_float::fast_float",
             "grpc::grpc++",
             "libarchive::libarchive",
             "lz4::lz4",

docs/build/environment.md

@@ -6,22 +6,52 @@ This document explains how to set one up.
 
 ## Tested compiler versions
 
-`xrpld` is built in the **C++23** dialect by default.
-Make sure your toolchain is recent enough — the compiler versions currently tested in CI are:
+`xrpld` is built in the **C++23** dialect by default, so your toolchain has to
+support it — see [compiler support for C++23][cpp23-support].
+The versions currently tested in CI are:
 
-| Compiler    | Version |
-| ----------- | ------- |
-| GCC         | 15.2    |
-| Clang       | 22      |
-| Apple Clang | 17      |
-| MSVC        | 19.44   |
+| Compiler    | Version            |
+| ----------- | ------------------ |
+| GCC         | 15.2               |
+| Clang       | 22                 |
+| Apple Clang | 21                 |
+| MSVC        | Visual Studio 2026 |
 
 LLVM tools (`clang-tidy` and `clang-format`) are also pinned to version 22.
 
+### Older compilers
+
 Older compilers may fail to build the latest `develop` code: the codebase now
 relies on C++23 features and has been adjusted for `clang-tidy`.
 If the latest code doesn't build for you, update your build toolchain first.
 
+If updating isn't an option for you, we do accept pull requests that fix builds
+on older compilers, as long as the change is small and doesn't make the code
+harder to read. What we can't promise is that older compilers will keep working:
+only the versions in the table above are tested in CI, and we won't hold back
+the use of C++23 features or add invasive workarounds to keep an untested
+compiler building. Treat support for anything outside the table as best-effort.
+
+## Required tools
+
+Besides a compiler, building `xrpld` requires:
+
+| Tool                                        | Minimum version |
+| ------------------------------------------- | --------------- |
+| [Git](https://git-scm.com/downloads)        | any recent      |
+| [Python](https://www.python.org/downloads/) | 3.11            |
+| [Conan](https://conan.io/downloads.html)    | 2.17            |
+| [CMake](https://cmake.org/download/)        | 3.16            |
+
+On Linux and macOS, the [Nix development shell](./nix.md) provides all of them
+(see below). On Windows they have to be installed manually.
+
+Once they are in place, verify that everything is installed and runnable with:
+
+```bash
+./bin/check-tools.sh
+```
+
 ## Linux and macOS
 
 The **recommended way** to get a development environment on Linux and macOS is
@@ -39,20 +69,15 @@ Clang. If you instead opt to use your system-wide Apple Clang (via
 below).
 
 See [Using the Nix development shell](./nix.md) for installation and usage
-details, including how to select a different compiler.
-
-> [!NOTE]
-> Using Nix is not mandatory. Any custom environment (Homebrew packages or
-> anything else) will continue to work, but then it is up to you to keep it in
-> sync with the environment used in CI. Nix unifies the development environment
-> for everyone and synchronizes updates, which is why we recommend it.
+details, including how to select a different compiler and why we recommend Nix
+over a hand-maintained environment.
 
 ### macOS: managing the Apple Clang version
 
 If you use your system-wide Apple Clang on macOS (via `nix develop .#apple-clang`),
 the compiler version is whatever your installed Xcode (or Command Line Tools)
 provides. The following command should return a version greater than or equal to
-the [minimum required](#tested-compiler-versions):
+the [tested one](#tested-compiler-versions):
 
 ```bash
 clang --version
@@ -89,23 +114,23 @@ building xrpld. You may want to install and pin a specific version of Xcode:
 Nix is not available on Windows, so the required tools have to be installed
 manually:
 
-- [Visual Studio 2022](https://visualstudio.microsoft.com/) with the
+- [Visual Studio 2026](https://visualstudio.microsoft.com/) with the
   **"Desktop development with C++"** workload — this provides MSVC and the
-  "x64 Native Tools Command Prompt".
+  "x64 Native Tools Command Prompt". CI configures CMake with the
+  `Visual Studio 18 2026` generator.
 - [Git for Windows](https://git-scm.com/download/win)
-- [Python 3.11](https://www.python.org/downloads/), or higher
-- [Conan 2.17](https://conan.io/downloads.html), or higher
-- [CMake 3.22](https://cmake.org/download/), or higher
-
-> [!NOTE]
-> Windows is used for development only and is not recommended for production.
+- Python, Conan, and CMake, at the versions listed in
+  [Required tools](#required-tools).
 
 ## Clang-tidy
 
 `clang-tidy` is required to run static analysis checks locally (see
 [CONTRIBUTING.md](../../CONTRIBUTING.md)). It is not required to build the
-project. This project currently uses `clang-tidy` version 22.
+project. The version this project uses is listed in
+[Tested compiler versions](#tested-compiler-versions).
 
-On Linux and macOS, the [Nix development shell](./nix.md) provides `clang-tidy`
-22 out of the box — run it via `run-clang-tidy`. No separate installation is
-needed.
+On Linux and macOS, the [Nix development shell](./nix.md) provides that exact
+version out of the box — run it via `run-clang-tidy`. No separate installation
+is needed.
+
+[cpp23-support]: https://en.cppreference.com/w/cpp/compiler_support/23

docs/build/nix.md

@@ -38,8 +38,10 @@ The first time you run this command, it will take a few minutes to download and
 
 ### Platform notes
 
-- **Linux**: `nix develop` gives you a shell with all the tooling necessary to
-  develop xrpld and with GCC 15.2 (also provided by Nix). There are no caveats.
+- **Linux**: `nix develop` gives you a shell with all the tooling necessary to develop xrpld
+  and with the same GCC/glibc toolchain that Nix builds for CI.
+  See [Choosing a different compiler](#choosing-a-different-compiler)
+  for the custom-vs-plain toolchain trade-off.
 - **macOS**: `nix develop` gives you a full environment too, with Clang (and
   every other tool, including Conan) provided by Nix. To use your system-wide
   Apple Clang instead, enter `nix develop .#apple-clang`. Conan has no binary in
@@ -63,8 +65,16 @@ The first time you run this command, it will take a few minutes to download and
 ### Choosing a different compiler
 
 A compiler can be chosen by providing its name with the `.#` prefix, e.g. `nix develop .#clang`.
-The `.#gcc` and `.#clang` shells provide the same GCC and Clang versions used in CI
-(pinned in [`nix/packages.nix`](../../nix/packages.nix)).
+
+On Linux, `.#gcc` and `.#clang` provide the exact toolchain CI uses:
+the compiler (pinned in [`nix/packages.nix`](../../nix/packages.nix))
+rebuilt against the pinned custom glibc (see [`nix/compilers.nix`](../../nix/compilers.nix)).
+Building that toolchain the first time is slow unless it is fetched from a Nix binary cache.
+If you don't need the custom glibc, the Linux-only `.#gcc-plain` and `.#clang-plain`
+give you the stock nixpkgs compilers of the same versions.
+On macOS there is no custom glibc, so `.#gcc` and `.#clang` are already the plain nixpkgs toolchain,
+and the `-plain` variants do not exist.
+
 Use `nix flake show` to see all the available development shells.
 
 Use `nix develop .#no-compiler` to use the compiler from your system.
@@ -72,14 +82,18 @@ Use `nix develop .#no-compiler` to use the compiler from your system.
 ### Example Usage
 
 ```bash
-# Use GCC (same version as CI)
+# Use GCC — same toolchain as CI (custom glibc on Linux)
 nix develop .#gcc
 
-# Use Clang (same version as CI)
+# Use Clang — same toolchain as CI (custom glibc on Linux)
 nix develop .#clang
 
 # Use default for your platform
 nix develop
+
+# Stock nixpkgs GCC/Clang, Linux only — skips the custom-glibc build, but does not match CI
+nix develop .#gcc-plain
+nix develop .#clang-plain
 ```
 
 ### Using a different shell
@@ -106,10 +120,36 @@ nix develop -c "$SHELL"
 >
 > If it doesn't, either adjust your shell configuration so it doesn't override `$PATH`, or use [direnv](#automatic-activation-with-direnv) (below), which loads the environment _after_ your shell config and so takes precedence regardless of the shell you use.
 
-## Building xrpld with Nix
+## Building xrpld in the Nix shell
 
 Once inside the Nix development shell, follow the standard [build instructions](../../BUILD.md#steps). The Nix shell provides all necessary tools (CMake, Ninja, Conan, etc.).
 
+Coverage builds (`-Dcoverage=ON`) work in the `gcc` shell (and `gcc-plain` on Linux):
+each ships a `gcov` matching its compiler, since Nix's cc-wrapper does not expose one.
+The `clang` shells do not include `llvm-cov`, so use a `gcc` shell for coverage.
+
+## Conan configuration
+
+The shell runs [`conan/init.sh`](../../conan/init.sh) on entry, so
+[Set Up Conan](../../BUILD.md#set-up-conan) is already done for you. It installs
+into the shell's own Conan home: `CONAN_HOME=~/.conan2-nix`.
+
+### Prebuilt packages
+
+On **Linux**, the binaries on the `xrplf` remote are built in this same Nix
+environment — CI runs in Docker images that bundle the dev shell's toolchain (see
+[`nix/docker`](../../nix/docker)) — so `.#gcc` and `.#clang` can reuse them. The
+`-plain` shells do not match that toolchain's glibc, so binaries from the remote
+are not a reliable match there.
+
+On **macOS**, CI builds with Apple Clang, so the remote holds nothing for the Nix
+`clang` toolchain and dependencies are compiled locally. We do not publish
+Nix-built macOS binaries because a Conan package ID records the compiler version
+but not the nixpkgs revision.
+
+To compile everything from source, add `--build '*'` to the `conan install`
+command.
+
 ## Automatic Activation with direnv
 
 [direnv](https://direnv.net/) or [nix-direnv](https://github.com/nix-community/nix-direnv) can automatically activate the Nix development shell when you enter the repository directory.
@@ -124,18 +164,18 @@ The repository already ships an `.envrc` at its root that activates the Nix flak
 > [!NOTE]
 > direnv only caches the `.direnv` directory (already listed in `.gitignore`); no other repository files are affected.
 
-## Conan and Prebuilt Packages
-
-Please note that there is no guarantee that binaries from conan cache will work when using nix. If you encounter any errors, please use `--build '*'` to force conan to compile everything from source:
-
-```bash
-conan install .. --output-folder . --build '*' --settings build_type=Release
-```
-
 ## Updating `flake.lock` file
 
 To update `flake.lock` to the latest revision use `nix flake update` command.
 
+## Tooling snapshots
+
+The tool versions in each Nix environment are recorded in
+[`nix/check-tools/`](../../nix/check-tools) and verified by CI. If you change the
+environment (bump the CI image tag, update `flake.lock`, or edit the tool list in
+`bin/check-tools.sh`), CI fails until you regenerate and commit the affected
+snapshot — see [`nix/check-tools/README.md`](../../nix/check-tools/README.md).
+
 ## Troubleshooting
 
 See [Troubleshooting Nix problems](./nix_troubleshooting.md) for common issues,

docs/build/nix_troubleshooting.md

@@ -3,6 +3,78 @@
 Common issues encountered when using the [Nix development shell](./nix.md), and
 how to resolve them.
 
+## `command not found: nix` after a macOS update
+
+If a shell suddenly can't find `nix` at all:
+
+```
+$ nix develop
+zsh: command not found: nix
+```
+
+then Nix is almost certainly still installed — only the shell hook that puts it
+on your `PATH` is gone. Confirm that first:
+
+```bash
+ls -l /nix/var/nix/profiles/default/bin/nix
+```
+
+If that exists, the installation is fine and this is purely a `PATH` problem.
+
+### Why it happens
+
+The installer does not touch your dotfiles. Instead it sources a setup script
+from the Nix store by editing **system-wide** rc files:
+
+| Shell | File the installer edits              |
+| ----- | ------------------------------------- |
+| bash  | `/etc/bashrc`, `/etc/bash.bashrc`     |
+| zsh   | `/etc/zshrc`                          |
+| fish  | `$__fish_sysconf_dir/conf.d/nix.fish` |
+
+macOS manages `/etc/zshrc`, so an OS update can replace it with the vendor copy
+and silently drop the Nix block. `/etc/bashrc` and the fish file usually survive,
+which is why the breakage often shows up in zsh only. You can verify this by
+diffing against the backup the installer left behind:
+
+```bash
+diff /etc/zshrc /etc/zshrc.backup-before-nix
+```
+
+If they are identical, the Nix snippet was wiped. This is upstream issue
+[NixOS/nix#3616](https://github.com/NixOS/nix/issues/3616).
+
+### Fix
+
+To unblock the current shell:
+
+```bash
+. /nix/var/nix/profiles/default/etc/profile.d/nix-daemon.sh
+```
+
+For a permanent fix, add the snippet to your **user** rc file rather than
+restoring `/etc/zshrc` — user dotfiles are not clobbered by OS updates:
+
+```bash
+cat >>~/.zshrc <<'EOF'
+
+# Nix
+if [ -e '/nix/var/nix/profiles/default/etc/profile.d/nix-daemon.sh' ]; then
+  . '/nix/var/nix/profiles/default/etc/profile.d/nix-daemon.sh'
+fi
+# End Nix
+EOF
+```
+
+The scripts guard against double-sourcing via `__ETC_PROFILE_NIX_SOURCED`, so
+this is safe even if a system-wide hook is later restored.
+
+> [!NOTE]
+> `/etc/zshrc` and `~/.zshrc` are only read by **interactive** zsh. If the
+> snippet is present but `zsh -c '…'`, a script, or an IDE terminal still can't
+> find `nix`, that shell is non-interactive — put the snippet in `~/.zshenv`
+> instead.
+
 ## Git worktrees
 
 If `nix develop` fails with an error like:

docs/sample_chart.doc

@@ -1,24 +0,0 @@
-/*!
-    \page somestatechart Example state diagram
-
-    \startuml SomeState "my state diagram"
-    scale 600 width
-
-    [*] -> State1
-    State1 --> State2 : Succeeded
-    State1 --> [*] : Aborted
-    State2 --> State3 : Succeeded
-    State2 --> [*] : Aborted
-    state State3 {
-      state "Accumulate Enough Data\nLong State Name" as long1
-      long1 : Just a test
-      [*] --> long1
-      long1 --> long1 : New Data
-      long1 --> ProcessData : Enough Data
-    }
-    State3 --> State3 : Failed
-    State3 --> [*] : Succeeded / Save Result
-    State3 --> [*] : Aborted
-
-    \enduml
-*/

flake.lock

@@ -36,7 +36,28 @@
     "root": {
       "inputs": {
         "nixpkgs": "nixpkgs",
-        "nixpkgs-custom-glibc": "nixpkgs-custom-glibc"
+        "nixpkgs-custom-glibc": "nixpkgs-custom-glibc",
+        "rust-overlay": "rust-overlay"
+      }
+    },
+    "rust-overlay": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1784611586,
+        "narHash": "sha256-OfqgY+0hp/zseZB7uyH0U8kIDPS4scZZCyAurEplvG0=",
+        "owner": "oxalica",
+        "repo": "rust-overlay",
+        "rev": "14f58845249f3552a89b07772626b8d3c632fa86",
+        "type": "github"
+      },
+      "original": {
+        "owner": "oxalica",
+        "repo": "rust-overlay",
+        "type": "github"
       }
     }
   },

flake.nix

@@ -10,12 +10,25 @@
       url = "github:NixOS/nixpkgs/9cd98386a38891d1074fc18036b842dc4416f562";
       flake = false;
     };
+    # Pinned Rust toolchains, delivered from the Nix store. Lets the Nix CI
+    # image and dev shell honour the single `rust-toolchain.toml` pin (shared
+    # with the rustup-based non-Nix runners) while staying hermetic — the
+    # toolchain lands in the image's Nix closure and is locked by flake.lock.
+    rust-overlay = {
+      url = "github:oxalica/rust-overlay";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
   };
 
   outputs =
-    { nixpkgs, nixpkgs-custom-glibc, ... }:
+    {
+      nixpkgs,
+      nixpkgs-custom-glibc,
+      rust-overlay,
+      ...
+    }:
     let
-      forEachSystem = import ./nix/utils.nix { inherit nixpkgs nixpkgs-custom-glibc; };
+      forEachSystem = import ./nix/utils.nix { inherit nixpkgs nixpkgs-custom-glibc rust-overlay; };
     in
     {
       devShells = forEachSystem (import ./nix/devshell.nix);

include/xrpl/basics/Archive.h

@@ -1,6 +1,6 @@
 #pragma once
 
-#include <boost/filesystem.hpp>
+#include <filesystem>
 
 namespace xrpl {
 
@@ -13,6 +13,6 @@ namespace xrpl {
  * @throws runtime_error
  */
 void
-extractTarLz4(boost::filesystem::path const& src, boost::filesystem::path const& dst);
+extractTarLz4(std::filesystem::path const& src, std::filesystem::path const& dst);
 
 }  // namespace xrpl

include/xrpl/basics/Buffer.h

@@ -3,6 +3,7 @@
 #include <xrpl/basics/Slice.h>
 #include <xrpl/beast/utility/instrumentation.h>
 
+#include <algorithm>
 #include <cstdint>
 #include <cstring>
 #include <memory>
@@ -156,6 +157,19 @@ public:
     }
     /** @} */
 
+    /**
+     * Set every byte in the buffer to the given value.
+     *
+     * The size is unchanged, and this is a no-op on an empty buffer.
+     *
+     * @param value the byte to write to every position.
+     */
+    void
+    fill(std::uint8_t value) noexcept
+    {
+        std::fill_n(p_.get(), size_, value);
+    }
+
     /**
      * Reset the buffer.
      * All memory is deallocated. The resulting size is 0.
@@ -226,10 +240,4 @@ operator==(Buffer const& lhs, Buffer const& rhs) noexcept
     return std::memcmp(lhs.data(), rhs.data(), lhs.size()) == 0;
 }
 
-inline bool
-operator!=(Buffer const& lhs, Buffer const& rhs) noexcept
-{
-    return !(lhs == rhs);
-}
-
 }  // namespace xrpl

include/xrpl/basics/FileUtilities.h

@@ -1,24 +1,79 @@
 #pragma once
 
-#include <boost/filesystem.hpp>
-#include <boost/system/error_code.hpp>
-
 #include <cstddef>
+#include <filesystem>
 #include <optional>
 #include <string>
+#include <system_error>
 
 namespace xrpl {
 
 std::string
 getFileContents(
-    boost::system::error_code& ec,
-    boost::filesystem::path const& sourcePath,
+    std::error_code& ec,
+    std::filesystem::path const& sourcePath,
     std::optional<std::size_t> maxSize = std::nullopt);
 
 void
 writeFileContents(
-    boost::system::error_code& ec,
-    boost::filesystem::path const& destPath,
+    std::error_code& ec,
+    std::filesystem::path const& destPath,
     std::string const& contents);
 
+/**
+ * Generate a unique, non-existing path under @p base whose filename starts with
+ * @p prefix and ends with a random hex suffix.
+ *
+ * Attempts up to @p maxAttempts paths. Throws `std::runtime_error` if a unique
+ * path cannot be found or if the filesystem returns an error while checking for
+ * existence.
+ */
+std::filesystem::path
+uniqueRandomPath(
+    std::filesystem::path const& base,
+    std::string const& prefix = "",
+    std::size_t maxAttempts = 100);
+
+/**
+ * RAII temporary directory.
+ *
+ * The directory and all its contents are deleted when
+ * the instance of `TempDir` is destroyed.
+ */
+class TempDir
+{
+    std::filesystem::path path_;
+
+public:
+#if !GENERATING_DOCS
+    TempDir(TempDir const&) = delete;
+    TempDir&
+    operator=(TempDir const&) = delete;
+#endif
+
+    /**
+     * Construct a temporary directory.
+     */
+    TempDir();
+
+    /**
+     * Destroy a temporary directory.
+     */
+    ~TempDir();
+
+    /**
+     * Get the native path for the temporary directory.
+     */
+    [[nodiscard]] std::string
+    path() const;
+
+    /**
+     * Get the native path for a file.
+     *
+     * The file does not need to exist.
+     */
+    [[nodiscard]] std::string
+    file(std::string const& name) const;
+};
+
 }  // namespace xrpl

include/xrpl/basics/IntrusivePointer.h

@@ -96,9 +96,6 @@ public:
     SharedIntrusive&
     operator=(SharedIntrusive const& rhs);
 
-    bool
-    operator!=(std::nullptr_t) const;
-
     bool
     operator==(std::nullptr_t) const;
 

include/xrpl/basics/IntrusivePointer.ipp

@@ -111,13 +111,6 @@ SharedIntrusive<T>::operator=(SharedIntrusive<TT>&& rhs)
     return *this;
 }
 
-template <class T>
-bool
-SharedIntrusive<T>::operator!=(std::nullptr_t) const
-{
-    return this->get() != nullptr;
-}
-
 template <class T>
 bool
 SharedIntrusive<T>::operator==(std::nullptr_t) const

include/xrpl/basics/Log.h

@@ -3,8 +3,8 @@
 #include <xrpl/beast/utility/Journal.h>
 
 #include <boost/beast/core/string.hpp>
-#include <boost/filesystem.hpp>
 
+#include <filesystem>
 #include <fstream>
 #include <map>
 #include <memory>
@@ -84,7 +84,7 @@ private:
          * @return `true` if the file was opened.
          */
         bool
-        open(boost::filesystem::path const& path);
+        open(std::filesystem::path const& path);
 
         /**
          * Close and re-open the system file associated with the log
@@ -133,7 +133,7 @@ private:
 
     private:
         std::unique_ptr<std::ofstream> stream_;
-        boost::filesystem::path path_;
+        std::filesystem::path path_;
     };
 
     std::mutex mutable mutex_;
@@ -152,7 +152,7 @@ public:
     virtual ~Logs() = default;
 
     bool
-    open(boost::filesystem::path const& pathToLogFile);
+    open(std::filesystem::path const& pathToLogFile);
 
     beast::Journal::Sink&
     get(std::string const& name);

include/xrpl/basics/Number.h

@@ -304,7 +304,7 @@ concept Integral64 = std::is_same_v<T, std::int64_t> || std::is_same_v<T, std::u
  *      on-ledger are non-negative. This is due to implementation details of
  *      several operations which use unsigned arithmetic internally. This is
  *      sufficient to represent all valid XRP values (where the absolute value
- *      can not exceed INITIAL_XRP: 10^17), and MPT values (where the absolute
+ *      can not exceed kInitialXRP: 10^17), and MPT values (where the absolute
  *      value can not exceed maxMPTokenAmount: 2^63-1).
  *
  * ---- Mantissa Range Switching ----
@@ -449,12 +449,6 @@ public:
             x.exponent_ == y.exponent_;
     }
 
-    friend constexpr bool
-    operator!=(Number const& x, Number const& y) noexcept
-    {
-        return !(x == y);
-    }
-
     friend constexpr bool
     operator<(Number const& l, Number const& r) noexcept
     {

include/xrpl/basics/Resolver.h

@@ -11,7 +11,7 @@ namespace xrpl {
 class Resolver
 {
 public:
-    using HandlerType = std::function<void(std::string, std::vector<beast::IP::Endpoint>)>;
+    using HandlerType = std::function<void(std::string, std::vector<beast::ip::Endpoint>)>;
 
     virtual ~Resolver() = 0;
 

include/xrpl/basics/SHAMapHash.h

@@ -85,12 +85,6 @@ public:
     }
 };
 
-inline bool
-operator!=(SHAMapHash const& x, SHAMapHash const& y)
-{
-    return !(x == y);
-}
-
 template <>
 inline std::size_t
 extract(SHAMapHash const& key)

include/xrpl/basics/Slice.h

@@ -11,6 +11,7 @@
 #include <limits>
 #include <stdexcept>
 #include <string>
+#include <string_view>
 #include <type_traits>
 #include <vector>
 
@@ -207,12 +208,6 @@ operator==(Slice const& lhs, Slice const& rhs) noexcept
     return std::memcmp(lhs.data(), rhs.data(), lhs.size()) == 0;
 }
 
-inline bool
-operator!=(Slice const& lhs, Slice const& rhs) noexcept
-{
-    return !(lhs == rhs);
-}
-
 inline bool
 operator<(Slice const& lhs, Slice const& rhs) noexcept
 {
@@ -251,4 +246,11 @@ makeSlice(std::basic_string<char, Traits, Alloc> const& s)
     return Slice(s.data(), s.size());
 }
 
+template <class Traits>
+Slice
+makeSlice(std::basic_string_view<char, Traits> s)
+{
+    return Slice(s.data(), s.size());
+}
+
 }  // namespace xrpl

include/xrpl/basics/StringUtilities.h

@@ -125,9 +125,31 @@ struct ParsedUrl
 bool
 parseUrl(ParsedUrl& pUrl, std::string const& strUrl);
 
+/**
+ * Remove leading and trailing ASCII whitespace.
+ *
+ * Whitespace is the fixed set " \t\n\v\f\r"; the current locale is not
+ * consulted, so the result depends only on the input.
+ *
+ * @param str The string to trim.
+ * @return @p str without leading or trailing whitespace.
+ */
 std::string
 trimWhitespace(std::string str);
 
+/**
+ * Fold ASCII upper case letters to lower case.
+ *
+ * Only 'A' through 'Z' are remapped; every other byte is left alone and the
+ * current locale is not consulted, so the result depends only on the input.
+ *
+ * @param str The string to fold.
+ * @return @p str with each ASCII upper case letter replaced by its lower case
+ *         equivalent.
+ */
+std::string
+toLower(std::string str);
+
 std::optional<std::uint64_t>
 toUInt64(std::string const& s);
 

include/xrpl/basics/TaggedCache.ipp

@@ -3,6 +3,9 @@
 #include <xrpl/basics/IntrusivePointer.ipp>
 #include <xrpl/basics/Log.h>  // IWYU pragma: keep
 #include <xrpl/basics/TaggedCache.h>
+#include <xrpl/basics/scope.h>
+
+#include <algorithm>
 
 namespace xrpl {
 
@@ -601,8 +604,42 @@ TaggedCache<Key, T, IsKeyCache, SharedWeakUnionPointer, SharedPointerType, Hash,
     std::vector<key_type> v;
 
     {
-        std::scoped_lock const lock(mutex_);
-        v.reserve(cache_.size());
+        // Keep track of how many iterations are needed. Exit the loop if the number of retries gets
+        // absurd. (Note that if this somehow ever happens, one more allocation will be done under
+        // lock, which is undesirable, but really should be almost impossible.)
+        std::size_t allocationIterations = 0;
+        std::unique_lock lock(mutex_);
+        for (auto size = cache_.size(); v.capacity() < size && allocationIterations < 20;
+             size = cache_.size())
+        {
+            ScopeUnlock const unlock(lock);
+            if (allocationIterations > 0)
+            {
+                JLOG(journal_.info())
+                    << "getKeys(): Cache grew beyond allocated capacity after "
+                    << allocationIterations << " prior attempt(s). Have " << v.capacity()
+                    << ", need " << size << ". Retrying allocation";
+            }
+            // Allocate the current size plus a little extra, in case the cache grows while
+            // allocating. Each time another allocation is needed, the extra also gets bigger until
+            // it ultimately doubles the size + 1.
+            constexpr std::size_t baseShift = 5;
+            auto const bufferOffset = std::min(allocationIterations, std::size_t{baseShift});
+            auto const bufferShift = baseShift - bufferOffset;
+            size += (size >> bufferShift) + 1;
+            v.reserve(size);
+            ++allocationIterations;
+        }
+        if (v.capacity() < cache_.size())
+        {
+            // LCOV_EXCL_START
+            UNREACHABLE("xrpl::TaggedCache::getKeys(): failed to allocate sufficient capacity");
+            v.reserve(cache_.size());
+            // LCOV_EXCL_STOP
+        }
+        XRPL_ASSERT(lock.owns_lock(), "xrpl::TaggedCache::getKeys(): owns lock");
+        XRPL_ASSERT(
+            v.capacity() >= cache_.size(), "xrpl::TaggedCache::getKeys(): sufficient capacity");
         for (auto const& _ : cache_)
             v.push_back(_.first);
     }

include/xrpl/basics/base64.h

@@ -41,6 +41,35 @@
 
 namespace xrpl {
 
+namespace base64 {
+
+/**
+ * Returns the maximum number of characters needed to base64-encode @p nBytes bytes.
+ *
+ * @param nBytes Number of input bytes.
+ * @return Size of the encoded string, including padding.
+ */
+constexpr std::size_t
+encodedSize(std::size_t const nBytes)
+{
+    return 4 * ((nBytes + 2) / 3);
+}
+
+/**
+ * Returns the maximum number of bytes a base64 string of @p numChars characters
+ * decodes to.
+ *
+ * @param numChars Number of base64 characters.
+ * @return Upper bound on the number of decoded bytes.
+ */
+constexpr std::size_t
+decodedSize(std::size_t const numChars)
+{
+    return ((numChars / 4) * 3) + 2;
+}
+
+}  // namespace base64
+
 std::string
 base64Encode(std::uint8_t const* data, std::size_t len);
 

include/xrpl/basics/partitioned_unordered_map.h

@@ -116,12 +116,6 @@ public:
         {
             return lhs.map == rhs.map && lhs.ait == rhs.ait && lhs.mit == rhs.mit;
         }
-
-        friend bool
-        operator!=(Iterator const& lhs, Iterator const& rhs)
-        {
-            return !(lhs == rhs);
-        }
     };
 
     struct ConstIterator
@@ -189,12 +183,6 @@ public:
         {
             return lhs.map == rhs.map && lhs.ait == rhs.ait && lhs.mit == rhs.mit;
         }
-
-        friend bool
-        operator!=(ConstIterator const& lhs, ConstIterator const& rhs)
-        {
-            return !(lhs == rhs);
-        }
     };
 
 private:

include/xrpl/beast/container/detail/aged_ordered_container.h

@@ -1038,25 +1038,6 @@ public:
                Compare,
                OtherAllocator> const& other) const;
 
-    template <
-        bool OtherIsMulti,
-        bool OtherIsMap,
-        class OtherT,
-        class OtherDuration,
-        class OtherAllocator>
-    bool
-    operator!=(AgedOrderedContainer<
-               OtherIsMulti,
-               OtherIsMap,
-               Key,
-               OtherT,
-               OtherDuration,
-               Compare,
-               OtherAllocator> const& other) const
-    {
-        return !(this->operator==(other));
-    }
-
     template <
         bool OtherIsMulti,
         bool OtherIsMap,

include/xrpl/beast/container/detail/aged_unordered_container.h

@@ -5,6 +5,7 @@
 #include <xrpl/beast/container/detail/aged_associative_container.h>
 #include <xrpl/beast/container/detail/aged_container_iterator.h>
 #include <xrpl/beast/container/detail/empty_base_optimization.h>
+#include <xrpl/beast/utility/instrumentation.h>
 
 #include <boost/intrusive/list.hpp>
 #include <boost/intrusive/unordered_set.hpp>
@@ -1339,28 +1340,6 @@ public:
                OtherAllocator> const& other) const
         requires MaybeMulti;
 
-    template <
-        bool OtherIsMulti,
-        bool OtherIsMap,
-        class OtherKey,
-        class OtherT,
-        class OtherDuration,
-        class OtherHash,
-        class OtherAllocator>
-    bool
-    operator!=(AgedUnorderedContainer<
-               OtherIsMulti,
-               OtherIsMap,
-               OtherKey,
-               OtherT,
-               OtherDuration,
-               OtherHash,
-               KeyEqual,
-               OtherAllocator> const& other) const
-    {
-        return !(this->operator==(other));
-    }
-
 private:
     bool
     wouldExceed(size_type additional) const

include/xrpl/beast/core/LexicalCast.h

@@ -58,7 +58,7 @@ struct LexicalCast<Out, std::string_view>
         "beast::LexicalCast can only be used with integral types");
 
     template <class Integral = Out>
-    bool
+    constexpr bool
     operator()(Integral& out, std::string_view in) const
         requires(std::is_integral_v<Integral> && !std::is_same_v<Integral, bool>)
     {
@@ -110,7 +110,7 @@ struct LexicalCast<Out, boost::core::basic_string_view<char>>
 {
     explicit LexicalCast() = default;
 
-    bool
+    constexpr bool
     operator()(Out& out, boost::core::basic_string_view<char> in) const
     {
         return LexicalCast<Out, std::string_view>()(out, in);
@@ -123,7 +123,7 @@ struct LexicalCast<Out, std::string>
 {
     explicit LexicalCast() = default;
 
-    bool
+    constexpr bool
     operator()(Out& out, std::string in) const
     {
         return LexicalCast<Out, std::string_view>()(out, in);
@@ -136,7 +136,7 @@ struct LexicalCast<Out, char const*>
 {
     explicit LexicalCast() = default;
 
-    bool
+    constexpr bool
     operator()(Out& out, char const* in) const
     {
         XRPL_ASSERT(in, "beast::detail::LexicalCast(char const*) : non-null input");
@@ -151,7 +151,7 @@ struct LexicalCast<Out, char*>
 {
     explicit LexicalCast() = default;
 
-    bool
+    constexpr bool
     operator()(Out& out, char* in) const
     {
         XRPL_ASSERT(in, "beast::detail::LexicalCast(char*) : non-null input");
@@ -177,7 +177,7 @@ struct BadLexicalCast : public std::bad_cast
  * @return `false` if there was a parsing or range error
  */
 template <class Out, class In>
-bool
+constexpr bool
 lexicalCastChecked(Out& out, In in)
 {
     return detail::LexicalCast<Out, In>()(out, in);
@@ -191,7 +191,7 @@ lexicalCastChecked(Out& out, In in)
  * @return The new type.
  */
 template <class Out, class In>
-Out
+constexpr Out
 lexicalCastThrow(In in)
 {
     if (Out out; lexicalCastChecked(out, in))
@@ -207,7 +207,7 @@ lexicalCastThrow(In in)
  * @return The new type.
  */
 template <class Out, class In>
-Out
+constexpr Out
 lexicalCast(In in, Out defaultValue = Out())
 {
     if (Out out; lexicalCastChecked(out, in))

include/xrpl/beast/core/List.h

@@ -82,13 +82,6 @@ public:
         return node_ == other.node_;
     }
 
-    template <typename M>
-    bool
-    operator!=(ListIterator<M> const& other) const noexcept
-    {
-        return !((*this) == other);
-    }
-
     reference
     operator*() const noexcept
     {

include/xrpl/beast/core/SemanticVersion.h

@@ -17,14 +17,14 @@ namespace beast {
 class SemanticVersion
 {
 public:
-    using identifier_list = std::vector<std::string>;
+    using IdentifierList = std::vector<std::string>;
 
     int majorVersion;
     int minorVersion;
     int patchVersion;
 
-    identifier_list preReleaseIdentifiers;
-    identifier_list metaData;
+    IdentifierList preReleaseIdentifiers;
+    IdentifierList metaData;
 
     SemanticVersion();
 

include/xrpl/beast/insight/StatsDCollector.h

@@ -26,7 +26,7 @@ public:
      * @param journal Destination for logging output.
      */
     static std::shared_ptr<StatsDCollector>
-    make(IP::Endpoint const& address, std::string const& prefix, Journal journal);
+    make(ip::Endpoint const& address, std::string const& prefix, Journal journal);
 };
 
 }  // namespace beast::insight

include/xrpl/beast/net/IPAddress.h

@@ -15,7 +15,7 @@
 //------------------------------------------------------------------------------
 
 namespace beast {
-namespace IP {
+namespace ip {
 
 using Address = boost::asio::ip::address;
 
@@ -73,13 +73,13 @@ isPublic(Address const& addr)
     return (addr.is_v4()) ? isPublic(addr.to_v4()) : isPublic(addr.to_v6());
 }
 
-}  // namespace IP
+}  // namespace ip
 
 //------------------------------------------------------------------------------
 
 template <class Hasher>
 void
-hash_append(Hasher& h, beast::IP::Address const& addr) noexcept
+hash_append(Hasher& h, beast::ip::Address const& addr) noexcept
 {
     using beast::hash_append;
     if (addr.is_v4())
@@ -101,12 +101,12 @@ hash_append(Hasher& h, beast::IP::Address const& addr) noexcept
 
 namespace boost {
 template <>
-struct hash<::beast::IP::Address>
+struct hash<::beast::ip::Address>
 {
     explicit hash() = default;
 
     std::size_t
-    operator()(::beast::IP::Address const& addr) const
+    operator()(::beast::ip::Address const& addr) const
     {
         return ::beast::Uhash<>{}(addr);
     }

include/xrpl/beast/net/IPAddressConversion.h

@@ -4,7 +4,7 @@
 
 #include <boost/asio.hpp>
 
-namespace beast::IP {
+namespace beast::ip {
 
 /**
  * Convert to Endpoint.
@@ -32,7 +32,7 @@ toAsioAddress(Endpoint const& endpoint);
 boost::asio::ip::tcp::endpoint
 toAsioEndpoint(Endpoint const& endpoint);
 
-}  // namespace beast::IP
+}  // namespace beast::ip
 
 namespace beast {
 
@@ -41,25 +41,25 @@ struct IPAddressConversion
 {
     explicit IPAddressConversion() = default;
 
-    static IP::Endpoint
+    static ip::Endpoint
     fromAsio(boost::asio::ip::address const& address)
     {
-        return IP::fromAsio(address);
+        return ip::fromAsio(address);
     }
-    static IP::Endpoint
+    static ip::Endpoint
     fromAsio(boost::asio::ip::tcp::endpoint const& endpoint)
     {
-        return IP::fromAsio(endpoint);
+        return ip::fromAsio(endpoint);
     }
     static boost::asio::ip::address
-    toAsioAddress(IP::Endpoint const& address)
+    toAsioAddress(ip::Endpoint const& address)
     {
-        return IP::toAsioAddress(address);
+        return ip::toAsioAddress(address);
     }
     static boost::asio::ip::tcp::endpoint
-    toAsioEndpoint(IP::Endpoint const& address)
+    toAsioEndpoint(ip::Endpoint const& address)
     {
-        return IP::toAsioEndpoint(address);
+        return ip::toAsioEndpoint(address);
     }
 };
 

include/xrpl/beast/net/IPAddressV4.h

@@ -2,7 +2,7 @@
 
 #include <boost/asio/ip/address_v4.hpp>
 
-namespace beast::IP {
+namespace beast::ip {
 
 using AddressV4 = boost::asio::ip::address_v4;
 
@@ -25,4 +25,4 @@ isPublic(AddressV4 const& addr);
 char
 getClass(AddressV4 const& address);
 
-}  // namespace beast::IP
+}  // namespace beast::ip

include/xrpl/beast/net/IPAddressV6.h

@@ -2,7 +2,7 @@
 
 #include <boost/asio/ip/address_v6.hpp>
 
-namespace beast::IP {
+namespace beast::ip {
 
 using AddressV6 = boost::asio::ip::address_v6;
 
@@ -18,4 +18,4 @@ isPrivate(AddressV6 const& addr);
 bool
 isPublic(AddressV6 const& addr);
 
-}  // namespace beast::IP
+}  // namespace beast::ip

include/xrpl/beast/net/IPEndpoint.h

@@ -13,7 +13,7 @@
 #include <optional>
 #include <string>
 
-namespace beast::IP {
+namespace beast::ip {
 
 using Port = std::uint16_t;
 
@@ -110,12 +110,6 @@ public:
     operator==(Endpoint const& lhs, Endpoint const& rhs);
     friend bool
     operator<(Endpoint const& lhs, Endpoint const& rhs);
-
-    friend bool
-    operator!=(Endpoint const& lhs, Endpoint const& rhs)
-    {
-        return !(lhs == rhs);
-    }
     friend bool
     operator>(Endpoint const& lhs, Endpoint const& rhs)
     {
@@ -223,7 +217,7 @@ operator<<(OutputStream& os, Endpoint const& endpoint)
 std::istream&
 operator>>(std::istream& is, Endpoint& endpoint);
 
-}  // namespace beast::IP
+}  // namespace beast::ip
 
 //------------------------------------------------------------------------------
 
@@ -232,12 +226,12 @@ namespace std {
  * std::hash support.
  */
 template <>
-struct hash<::beast::IP::Endpoint>
+struct hash<::beast::ip::Endpoint>
 {
     hash() = default;
 
     std::size_t
-    operator()(::beast::IP::Endpoint const& endpoint) const
+    operator()(::beast::ip::Endpoint const& endpoint) const
     {
         return ::beast::Uhash<>{}(endpoint);
     }
@@ -249,12 +243,12 @@ namespace boost {
  * boost::hash support.
  */
 template <>
-struct hash<::beast::IP::Endpoint>
+struct hash<::beast::ip::Endpoint>
 {
     hash() = default;
 
     std::size_t
-    operator()(::beast::IP::Endpoint const& endpoint) const
+    operator()(::beast::ip::Endpoint const& endpoint) const
     {
         return ::beast::Uhash<>{}(endpoint);
     }

include/xrpl/beast/rfc2616.h

@@ -229,12 +229,6 @@ public:
         return other.it_ == it_ && other.end_ == end_ && other.value_.size() == value_.size();
     }
 
-    bool
-    operator!=(ListIterator const& other) const
-    {
-        return !(*this == other);
-    }
-
     reference
     operator*() const
     {

include/xrpl/beast/unit_test/reporter.h

@@ -8,7 +8,6 @@
 #include <xrpl/beast/unit_test/runner.h>
 #include <xrpl/beast/unit_test/suite_info.h>
 
-#include <boost/lexical_cast.hpp>
 #include <boost/optional.hpp>
 
 #include <algorithm>
@@ -188,7 +187,7 @@ Reporter<Unused>::fmtdur(clock_type::duration const& d)
     using namespace std::chrono;
     auto const ms = duration_cast<milliseconds>(d);
     if (ms < seconds{1})
-        return boost::lexical_cast<std::string>(ms.count()) + "ms";
+        return std::to_string(ms.count()) + "ms";
     std::stringstream ss;
     ss << std::fixed << std::setprecision(1) << (ms.count() / 1000.) << "s";
     return ss.str();

include/xrpl/beast/unit_test/suite.h

@@ -6,11 +6,10 @@
 
 #include <xrpl/beast/unit_test/runner.h>
 
-#include <boost/filesystem.hpp>
-#include <boost/lexical_cast.hpp>
 #include <boost/throw_exception.hpp>
 
 #include <exception>
+#include <filesystem>
 #include <memory>
 #include <ostream>
 #include <sstream>
@@ -27,10 +26,10 @@ makeReason(String const& reason, char const* file, int line)
     std::string s(reason);
     if (!s.empty())
         s.append(": ");
-    namespace fs = boost::filesystem;
+    namespace fs = std::filesystem;
     s.append(fs::path{file}.filename().string());
     s.append("(");
-    s.append(boost::lexical_cast<std::string>(line));
+    s.append(std::to_string(line));
     s.append(")");
     return s;
 }
@@ -295,6 +294,20 @@ public:
         return runner_->arg();
     }
 
+protected:
+    /**
+     * Lets a suite compose other suites (e.g. an aggregator that reruns a
+     * group of related suites under its own name) via `SuiteInfo::run`.
+     *
+     * @return The runner this suite is executing under.
+     */
+    Runner&
+    runner() const
+    {
+        return *runner_;
+    }
+
+public:
     /**
      * DEPRECATED
      * @return `true` if the test condition indicates success(a false value)

include/xrpl/beast/utility/temp_dir.h

@@ -1,71 +0,0 @@
-#pragma once
-
-#include <boost/filesystem.hpp>
-
-#include <string>
-
-namespace beast {
-
-/**
- * RAII temporary directory.
- *
- * The directory and all its contents are deleted when
- * the instance of `temp_dir` is destroyed.
- */
-class TempDir
-{
-    boost::filesystem::path path_;
-
-public:
-#if !GENERATING_DOCS
-    TempDir(TempDir const&) = delete;
-    TempDir&
-    operator=(TempDir const&) = delete;
-#endif
-
-    /**
-     * Construct a temporary directory.
-     */
-    TempDir()
-    {
-        auto const dir = boost::filesystem::temp_directory_path();
-        do
-        {
-            path_ = dir / boost::filesystem::unique_path();
-        } while (boost::filesystem::exists(path_));
-        boost::filesystem::create_directory(path_);
-    }
-
-    /**
-     * Destroy a temporary directory.
-     */
-    ~TempDir()
-    {
-        // use non-throwing calls in the destructor
-        boost::system::error_code ec;
-        boost::filesystem::remove_all(path_, ec);
-        // TODO: warn/notify if ec set ?
-    }
-
-    /**
-     * Get the native path for the temporary directory
-     */
-    [[nodiscard]] std::string
-    path() const
-    {
-        return path_.string();
-    }
-
-    /**
-     * Get the native path for the a file.
-     *
-     * The file does not need to exist.
-     */
-    [[nodiscard]] std::string
-    file(std::string const& name) const
-    {
-        return (path_ / name).string();
-    }
-};
-
-}  // namespace beast

include/xrpl/conditions/Condition.h

@@ -92,10 +92,4 @@ operator==(Condition const& lhs, Condition const& rhs)
         lhs.fingerprint == rhs.fingerprint;
 }
 
-inline bool
-operator!=(Condition const& lhs, Condition const& rhs)
-{
-    return !(lhs == rhs);
-}
-
 }  // namespace xrpl::cryptoconditions

include/xrpl/conditions/Fulfillment.h

@@ -93,12 +93,6 @@ operator==(Fulfillment const& lhs, Fulfillment const& rhs)
         lhs.fingerprint() == rhs.fingerprint();
 }
 
-inline bool
-operator!=(Fulfillment const& lhs, Fulfillment const& rhs)
-{
-    return !(lhs == rhs);
-}
-
 /**
  * Determine whether the given fulfillment and condition match
  */

include/xrpl/config/Constants.h

@@ -25,6 +25,7 @@ struct Sections
     static constexpr auto kLedgerHistory = "ledger_history";
     static constexpr auto kLedgerReplay = "ledger_replay";
     static constexpr auto kLedgerTxTables = "ledger_tx_tables";
+    static constexpr auto kMaxSubscriptionsPerConnection = "max_subscriptions_per_connection";
     static constexpr auto kMaxTransactions = "max_transactions";
     static constexpr auto kNetworkId = "network_id";
     static constexpr auto kNetworkQuorum = "network_quorum";
@@ -118,7 +119,9 @@ struct Keys
     static constexpr auto kLogInterval = "log_interval";
     static constexpr auto kMaxDivergedTime = "max_diverged_time";
     static constexpr auto kMaxLedgerCountsToStore = "max_ledger_counts_to_store";
+    static constexpr auto kMaxTrustedCount = "max_trusted_count";
     static constexpr auto kMaxUnknownTime = "max_unknown_time";
+    static constexpr auto kMaxUntrustedCount = "max_untrusted_count";
     static constexpr auto kMaximumTxnInLedger = "maximum_txn_in_ledger";
     static constexpr auto kMaximumTxnPerAccount = "maximum_txn_per_account";
     static constexpr auto kMemoryLevel = "memory_level";