Move the lambdas to be helper functions

- This would potentially be very expensive to implement, so don't.
- However, it might be a good start for a ledger fix option.

.clang-format

@@ -1,5 +1,21 @@
 ---
-Language:        Cpp
+BreakBeforeBraces: Custom
+BraceWrapping:
+  AfterClass: true
+  AfterControlStatement: true
+  AfterEnum: false
+  AfterFunction: true
+  AfterNamespace: false
+  AfterObjCDeclaration: true
+  AfterStruct: true
+  AfterUnion: true
+  BeforeCatch: true
+  BeforeElse: true
+  IndentBraces: false
+KeepEmptyLinesAtTheStartOfBlocks: false
+MaxEmptyLinesToKeep: 1
+---
+Language: Cpp
 AccessModifierOffset: -4
 AlignAfterOpenBracket: AlwaysBreak
 AlignConsecutiveAssignments: false
@@ -18,48 +34,41 @@ AlwaysBreakBeforeMultilineStrings: true
 AlwaysBreakTemplateDeclarations: true
 BinPackArguments: false
 BinPackParameters: false
-BraceWrapping:
-  AfterClass:      true
-  AfterControlStatement: true
-  AfterEnum:       false
-  AfterFunction:   true
-  AfterNamespace:  false
-  AfterObjCDeclaration: true
-  AfterStruct:     true
-  AfterUnion:      true
-  BeforeCatch:     true
-  BeforeElse:      true
-  IndentBraces:    false
 BreakBeforeBinaryOperators: false
-BreakBeforeBraces: Custom
 BreakBeforeTernaryOperators: true
 BreakConstructorInitializersBeforeComma: true
-ColumnLimit:     80
-CommentPragmas:  '^ IWYU pragma:'
+ColumnLimit: 80
+CommentPragmas: "^ IWYU pragma:"
 ConstructorInitializerAllOnOneLineOrOnePerLine: true
 ConstructorInitializerIndentWidth: 4
 ContinuationIndentWidth: 4
 Cpp11BracedListStyle: true
 DerivePointerAlignment: false
-DisableFormat:   false
+DisableFormat: false
 ExperimentalAutoDetectBinPacking: false
-ForEachMacros:   [ Q_FOREACH,  BOOST_FOREACH ]
+ForEachMacros: [Q_FOREACH, BOOST_FOREACH]
+IncludeBlocks: Regroup
 IncludeCategories:
-  - Regex:           '^<(BeastConfig)'
-    Priority:        0
-  - Regex:           '^<(ripple)/'
-    Priority:        2
-  - Regex:           '^<(boost)/'
-    Priority:        3
-  - Regex:           '.*'
-    Priority:        4
-IncludeIsMainRegex: '$'
+  - Regex: "^<(test)/"
+    Priority: 0
+  - Regex: "^<(xrpld)/"
+    Priority: 1
+  - Regex: "^<(xrpl)/"
+    Priority: 2
+  - Regex: "^<(boost)/"
+    Priority: 3
+  - Regex: "^.*/"
+    Priority: 4
+  - Regex: '^.*\.h'
+    Priority: 5
+  - Regex: ".*"
+    Priority: 6
+IncludeIsMainRegex: "$"
 IndentCaseLabels: true
 IndentFunctionDeclarationAfterType: false
-IndentWidth:     4
+IndentRequiresClause: true
+IndentWidth: 4
 IndentWrappedFunctionNames: false
-KeepEmptyLinesAtTheStartOfBlocks: false
-MaxEmptyLinesToKeep: 1
 NamespaceIndentation: None
 ObjCSpaceAfterProperty: false
 ObjCSpaceBeforeProtocolList: false
@@ -70,18 +79,25 @@ PenaltyBreakString: 1000
 PenaltyExcessCharacter: 1000000
 PenaltyReturnTypeOnItsOwnLine: 200
 PointerAlignment: Left
-ReflowComments:  true
-SortIncludes:    true
+ReflowComments: true
+RequiresClausePosition: OwnLine
+SortIncludes: true
 SpaceAfterCStyleCast: false
 SpaceBeforeAssignmentOperators: true
 SpaceBeforeParens: ControlStatements
 SpaceInEmptyParentheses: false
 SpacesBeforeTrailingComments: 2
-SpacesInAngles:  false
+SpacesInAngles: false
 SpacesInContainerLiterals: true
 SpacesInCStyleCastParentheses: false
 SpacesInParentheses: false
 SpacesInSquareBrackets: false
-Standard:        Cpp11
-TabWidth:        8
-UseTab:          Never
+Standard: Cpp11
+TabWidth: 8
+UseTab: Never
+QualifierAlignment: Right
+---
+Language: Proto
+BasedOnStyle: Google
+ColumnLimit: 0
+IndentWidth: 2

.codecov.yml

@@ -1,5 +1,38 @@
-
 codecov:
-  ci:
-    - !appveyor
-    - travis
+  require_ci_to_pass: true
+
+comment:
+  behavior: default
+  layout: reach,diff,flags,tree,reach
+  show_carryforward_flags: false
+
+coverage:
+  range: "70..85"
+  precision: 1
+  round: nearest
+  status:
+    project:
+      default:
+        target: 75%
+        threshold: 2%
+    patch:
+      default:
+        target: auto
+        threshold: 2%
+    changes: false
+
+github_checks:
+  annotations: true
+
+parsers:
+  cobertura:
+    partials_as_hits: true
+    handle_missing_conditions: true
+
+slack_app: false
+
+ignore:
+  - "src/test/"
+  - "src/tests/"
+  - "include/xrpl/beast/test/"
+  - "include/xrpl/beast/unit_test/"

.git-blame-ignore-revs

@@ -2,3 +2,15 @@
 # To use it by default in git blame:
 # git config blame.ignoreRevsFile .git-blame-ignore-revs
 50760c693510894ca368e90369b0cc2dabfd07f3
+e2384885f5f630c8f0ffe4bf21a169b433a16858
+241b9ddde9e11beb7480600fd5ed90e1ef109b21
+760f16f56835663d9286bd29294d074de26a7ba6
+0eebe6a5f4246fced516d52b83ec4e7f47373edd
+2189cc950c0cebb89e4e2fa3b2d8817205bf7cef
+b9d007813378ad0ff45660dc07285b823c7e9855
+fe9a5365b8a52d4acc42eb27369247e6f238a4f9
+9a93577314e6a8d4b4a8368cc9d2b15a5d8303e8
+552377c76f55b403a1c876df873a23d780fcc81c
+97f0747e103f13e26e45b731731059b32f7679ac
+b13370ac0d207217354f1fc1c29aef87769fb8a1
+896b8c3b54a22b0497cb0d1ce95e1095f9a227ce

.github/CODEOWNERS

@@ -0,0 +1,8 @@
+# Allow anyone to review any change by default.
+*
+
+# Require the rpc-reviewers team to review changes to the rpc code.
+include/xrpl/protocol/ @xrplf/rpc-reviewers
+src/libxrpl/protocol/ @xrplf/rpc-reviewers
+src/xrpld/rpc/ @xrplf/rpc-reviewers
+src/xrpld/app/misc/ @xrplf/rpc-reviewers

.github/ISSUE_TEMPLATE/bug_report.md

@@ -2,30 +2,35 @@
 name: Bug Report
 about: Create a report to help us improve rippled
 title: "[Title with short description] (Version: [rippled version])"
-labels: ''
-assignees: ''
-
+labels: ""
+assignees: ""
 ---
+
 <!-- Please search existing issues to avoid creating duplicates.-->
 
 ## Issue Description
+
 <!--Provide a summary for your issue/bug.-->
 
 ## Steps to Reproduce
+
 <!--List in detail the exact steps to reproduce the unexpected behavior of the software.-->
 
 ## Expected Result
+
 <!--Explain in detail what behavior you expected to happen.-->
 
 ## Actual Result
+
 <!--Explain in detail what behavior actually happened.-->
 
 ## Environment
+
 <!--Please describe your environment setup (such as Ubuntu 18.04 with Boost 1.70).-->
 <!-- If you are using a formal release, please use the version returned by './rippled --version' as the version number-->
 <!-- If you are working off of develop, please add the git hash via 'git rev-parse HEAD'-->
 
 ## Supporting Files
+
 <!--If you have supporting files such as a log, feel free to post a link here using Github Gist.-->
 <!--Consider adding configuration files with private information removed via Github Gist. -->
-

.github/ISSUE_TEMPLATE/feature_request.md

@@ -3,19 +3,23 @@ name: Feature Request
 about: Suggest a new feature for the rippled project
 title: "[Title with short description] (Version: [rippled version])"
 labels: Feature Request
-assignees: ''
-
+assignees: ""
 ---
+
 <!-- Please search existing issues to avoid creating duplicates.-->
 
 ## Summary
+
 <!-- Provide a summary to the feature request-->
 
 ## Motivation
+
 <!-- Why do we need this feature?-->
 
 ## Solution
+
 <!-- What is the solution?-->
 
 ## Paths Not Taken
+
 <!-- What other alternatives have been considered?-->

.github/actions/build-deps/action.yml

@@ -0,0 +1,49 @@
+name: Build Conan dependencies
+description: "Install Conan dependencies, optionally forcing a rebuild of all dependencies."
+
+# Note that actions do not support 'type' and all inputs are strings, see
+# https://docs.github.com/en/actions/reference/workflows-and-actions/metadata-syntax#inputs.
+inputs:
+  build_dir:
+    description: "The directory where to build."
+    required: true
+  build_type:
+    description: 'The build type to use ("Debug", "Release").'
+    required: true
+  build_nproc:
+    description: "The number of processors to use for building."
+    required: true
+  force_build:
+    description: 'Force building of all dependencies ("true", "false").'
+    required: false
+    default: "false"
+  log_verbosity:
+    description: "The logging verbosity."
+    required: false
+    default: "verbose"
+
+runs:
+  using: composite
+  steps:
+    - name: Install Conan dependencies
+      shell: bash
+      env:
+        BUILD_DIR: ${{ inputs.build_dir }}
+        BUILD_NPROC: ${{ inputs.build_nproc }}
+        BUILD_OPTION: ${{ inputs.force_build == 'true' && '*' || 'missing' }}
+        BUILD_TYPE: ${{ inputs.build_type }}
+        LOG_VERBOSITY: ${{ inputs.log_verbosity }}
+      run: |
+        echo 'Installing dependencies.'
+        mkdir -p "${BUILD_DIR}"
+        cd "${BUILD_DIR}"
+        conan install \
+          --output-folder . \
+          --build="${BUILD_OPTION}" \
+          --options:host='&:tests=True' \
+          --options:host='&:xrpld=True' \
+          --settings:all build_type="${BUILD_TYPE}" \
+          --conf:all tools.build:jobs=${BUILD_NPROC} \
+          --conf:all tools.build:verbosity="${LOG_VERBOSITY}" \
+          --conf:all tools.compilation:verbosity="${LOG_VERBOSITY}" \
+          ..

.github/actions/build/action.yml

@@ -1,29 +0,0 @@
-name: build
-inputs:
-  generator:
-    default: null
-  configuration:
-    required: true
-  cmake-args:
-    default: null
-# An implicit input is the environment variable `build_dir`.
-runs:
-  using: composite
-  steps:
-    - name: configure
-      shell: bash
-      run: |
-        cd ${build_dir}
-        cmake \
-          ${{ inputs.generator && format('-G "{0}"', inputs.generator) || '' }} \
-          -DCMAKE_TOOLCHAIN_FILE:FILEPATH=build/generators/conan_toolchain.cmake \
-          -DCMAKE_BUILD_TYPE=${{ inputs.configuration }} \
-          ${{ inputs.cmake-args }} \
-          ..
-    - name: build
-      shell: bash
-      run: |
-        cmake \
-          --build ${build_dir} \
-          --config ${{ inputs.configuration }} \
-          --parallel ${NUM_PROCESSORS:-$(nproc)}

.github/actions/dependencies/action.yml

@@ -1,26 +0,0 @@
-name: dependencies
-inputs:
-  configuration:
-    required: true
-# An implicit input is the environment variable `build_dir`.
-runs:
-  using: composite
-  steps:
-    - name: unlock Conan
-      shell: bash
-      run: conan remove --locks
-    - name: export custom recipes
-      shell: bash
-      run: |
-        conan export external/snappy snappy/1.1.10@
-        conan export external/soci soci/4.0.3@
-    - name: install dependencies
-      shell: bash
-      run: |
-        mkdir ${build_dir}
-        cd ${build_dir}
-        conan install \
-          --output-folder . \
-          --build missing \
-          --settings build_type=${{ inputs.configuration }} \
-          ..

.github/actions/print-env/action.yml

@@ -0,0 +1,43 @@
+name: Print build environment
+description: "Print environment and some tooling versions"
+
+runs:
+  using: composite
+  steps:
+    - name: Check configuration (Windows)
+      if: ${{ runner.os == 'Windows' }}
+      shell: bash
+      run: |
+        echo 'Checking environment variables.'
+        set
+
+        echo 'Checking CMake version.'
+        cmake --version
+
+        echo 'Checking Conan version.'
+        conan --version
+
+    - name: Check configuration (Linux and macOS)
+      if: ${{ runner.os == 'Linux' || runner.os == 'macOS' }}
+      shell: bash
+      run: |
+        echo 'Checking path.'
+        echo ${PATH} | tr ':' '\n'
+
+        echo 'Checking environment variables.'
+        env | sort
+
+        echo 'Checking CMake version.'
+        cmake --version
+
+        echo 'Checking compiler version.'
+        ${{ runner.os == 'Linux' && '${CC}' || 'clang' }} --version
+
+        echo 'Checking Conan version.'
+        conan --version
+
+        echo 'Checking Ninja version.'
+        ninja --version
+
+        echo 'Checking nproc version.'
+        nproc --version

.github/actions/setup-conan/action.yml

@@ -0,0 +1,46 @@
+name: Setup Conan
+description: "Set up Conan configuration, profile, and remote."
+
+inputs:
+  conan_remote_name:
+    description: "The name of the Conan remote to use."
+    required: false
+    default: xrplf
+  conan_remote_url:
+    description: "The URL of the Conan endpoint to use."
+    required: false
+    default: https://conan.ripplex.io
+
+runs:
+  using: composite
+
+  steps:
+    - name: Set up Conan configuration
+      shell: bash
+      run: |
+        echo 'Installing configuration.'
+        cat conan/global.conf ${{ runner.os == 'Linux' && '>>' || '>' }} $(conan config home)/global.conf
+
+        echo 'Conan configuration:'
+        conan config show '*'
+
+    - name: Set up Conan profile
+      shell: bash
+      run: |
+        echo 'Installing profile.'
+        conan config install conan/profiles/default -tf $(conan config home)/profiles/
+
+        echo 'Conan profile:'
+        conan profile show
+
+    - name: Set up Conan remote
+      shell: bash
+      env:
+        CONAN_REMOTE_NAME: ${{ inputs.conan_remote_name }}
+        CONAN_REMOTE_URL: ${{ inputs.conan_remote_url }}
+      run: |
+        echo "Adding Conan remote '${CONAN_REMOTE_NAME}' at '${CONAN_REMOTE_URL}'."
+        conan remote add --index 0 --force "${CONAN_REMOTE_NAME}" "${CONAN_REMOTE_URL}"
+
+        echo 'Listing Conan remotes.'
+        conan remote list

.github/pull_request_template.md

@@ -1,6 +1,12 @@
 <!--
 This PR template helps you to write a good pull request description.
 Please feel free to include additional useful information even beyond what is requested below.
+
+If your branch is on a personal fork and has a name that allows it to
+run CI build/test jobs (e.g. "ci/foo"), remember to rename it BEFORE
+opening the PR.  This avoids unnecessary redundant test runs. Renaming
+the branch after opening the PR will close the PR.
+https://docs.github.com/en/repositories/configuring-branches-and-merges-in-your-repository/managing-branches-in-your-repository/renaming-a-branch
 -->
 
 ## High Level Overview of Change
@@ -33,6 +39,7 @@ Please check [x] relevant options, delete irrelevant ones.
 - [ ] New feature (non-breaking change which adds functionality)
 - [ ] Breaking change (fix or feature that would cause existing functionality to not work as expected)
 - [ ] Refactor (non-breaking change that only restructures code)
+- [ ] Performance (increase or change in throughput and/or latency)
 - [ ] Tests (you added tests for code that already exists, or your new feature included in this PR)
 - [ ] Documentation update
 - [ ] Chore (no impact to binary, e.g. `.gitignore`, formatting, dropping support for older tooling)
@@ -58,6 +65,12 @@ Please check [x] relevant options, delete irrelevant ones.
 ## Before / After
 If relevant, use this section for an English description of the change at a technical level.
 If this change affects an API, examples should be included here.
+
+For performance-impacting changes, please provide these details:
+1. Is this a new feature, bug fix, or improvement to existing functionality?
+2. What behavior/functionality does the change impact?
+3. In what processing can the impact be measured? Be as specific as possible - e.g. RPC client call, payment transaction that involves LOB, AMM, caching, DB operations, etc.
+4. Does this change affect concurrent processing - e.g. does it involve acquiring locks, multi-threaded processing, or async processing?
 -->
 
 <!--

.github/scripts/levelization/README.md

@@ -25,32 +25,32 @@ more dependencies listed later.
 **tl;dr:** The modules listed first are more independent than the modules
 listed later.
 
-| Level / Tier | Module(s)                                     |
-|--------------|-----------------------------------------------|
-| 01           | ripple/beast ripple/unity
-| 02           | ripple/basics
-| 03           | ripple/json ripple/crypto
-| 04           | ripple/protocol
-| 05           | ripple/core ripple/conditions ripple/consensus ripple/resource ripple/server
-| 06           | ripple/peerfinder ripple/ledger ripple/nodestore ripple/net
-| 07           | ripple/shamap ripple/overlay
-| 08           | ripple/app
-| 09           | ripple/rpc
-| 10           | ripple/perflog
-| 11           | test/jtx test/beast test/csf
-| 12           | test/unit_test
-| 13           | test/crypto test/conditions test/json test/resource test/shamap test/peerfinder test/basics test/overlay
-| 14           | test
-| 15           | test/net test/protocol test/ledger test/consensus test/core test/server test/nodestore
-| 16           | test/rpc test/app
+| Level / Tier | Module(s)                                                                                                |
+| ------------ | -------------------------------------------------------------------------------------------------------- |
+| 01           | ripple/beast ripple/unity                                                                                |
+| 02           | ripple/basics                                                                                            |
+| 03           | ripple/json ripple/crypto                                                                                |
+| 04           | ripple/protocol                                                                                          |
+| 05           | ripple/core ripple/conditions ripple/consensus ripple/resource ripple/server                             |
+| 06           | ripple/peerfinder ripple/ledger ripple/nodestore ripple/net                                              |
+| 07           | ripple/shamap ripple/overlay                                                                             |
+| 08           | ripple/app                                                                                               |
+| 09           | ripple/rpc                                                                                               |
+| 10           | ripple/perflog                                                                                           |
+| 11           | test/jtx test/beast test/csf                                                                             |
+| 12           | test/unit_test                                                                                           |
+| 13           | test/crypto test/conditions test/json test/resource test/shamap test/peerfinder test/basics test/overlay |
+| 14           | test                                                                                                     |
+| 15           | test/net test/protocol test/ledger test/consensus test/core test/server test/nodestore                   |
+| 16           | test/rpc test/app                                                                                        |
 
-(Note that `test` levelization is *much* less important and *much* less
+(Note that `test` levelization is _much_ less important and _much_ less
 strictly enforced than `ripple` levelization, other than the requirement
-that `test` code should *never* be included in `ripple` code.)
+that `test` code should _never_ be included in `ripple` code.)
 
 ## Validation
 
-The [levelization.sh](levelization.sh) script takes no parameters,
+The [levelization](generate.sh) script takes no parameters,
 reads no environment variables, and can be run from any directory,
 as long as it is in the expected location in the rippled repo.
 It can be run at any time from within a checked out repo, and will
@@ -59,48 +59,48 @@ the rippled source. The only caveat is that it runs much slower
 under Windows than in Linux. It hasn't yet been tested under MacOS.
 It generates many files of [results](results):
 
-* `rawincludes.txt`: The raw dump of the `#includes`
-* `paths.txt`: A second dump grouping the source module
+- `rawincludes.txt`: The raw dump of the `#includes`
+- `paths.txt`: A second dump grouping the source module
   to the destination module, deduped, and with frequency counts.
-* `includes/`: A directory where each file represents a module and
+- `includes/`: A directory where each file represents a module and
   contains a list of modules and counts that the module _includes_.
-* `includedby/`: Similar to `includes/`, but the other way around. Each
+- `includedby/`: Similar to `includes/`, but the other way around. Each
   file represents a module and contains a list of modules and counts
   that _include_ the module.
-* [`loops.txt`](results/loops.txt): A list of direct loops detected
+- [`loops.txt`](results/loops.txt): A list of direct loops detected
   between modules as they actually exist, as opposed to how they are
   desired as described above. In a perfect repo, this file will be
   empty.
   This file is committed to the repo, and is used by the [levelization
-  Github workflow](../../.github/workflows/levelization.yml) to validate
+  Github workflow](../../workflows/reusable-check-levelization.yml) to validate
   that nothing changed.
-* [`ordering.txt`](results/ordering.txt): A list showing relationships
+- [`ordering.txt`](results/ordering.txt): A list showing relationships
   between modules where there are no loops as they actually exist, as
   opposed to how they are desired as described above.
   This file is committed to the repo, and is used by the [levelization
-  Github workflow](../../.github/workflows/levelization.yml) to validate
+  Github workflow](../../workflows/reusable-check-levelization.yml) to validate
   that nothing changed.
-* [`levelization.yml`](../../.github/workflows/levelization.yml)
+- [`levelization.yml`](../../workflows/reusable-check-levelization.yml)
   Github Actions workflow to test that levelization loops haven't
-  changed.  Unfortunately, if changes are detected, it can't tell if
+  changed. Unfortunately, if changes are detected, it can't tell if
   they are improvements or not, so if you have resolved any issues or
   done anything else to improve levelization, run `levelization.sh`,
   and commit the updated results.
 
-The  `loops.txt` and `ordering.txt` files relate the modules
+The `loops.txt` and `ordering.txt` files relate the modules
 using comparison signs, which indicate the number of times each
 module is included in the other.
 
-* `A > B` means that A should probably be at a higher level than B,
+- `A > B` means that A should probably be at a higher level than B,
   because B is included in A significantly more than A is included in B.
   These results can be included in both `loops.txt` and `ordering.txt`.
   Because `ordering.txt`only includes relationships where B is not
   included in A at all, it will only include these types of results.
-* `A ~= B` means that A and B are included in each other a different
+- `A ~= B` means that A and B are included in each other a different
   number of times, but the values are so close that the script can't
   definitively say that one should be above the other. These results
   will only be included in `loops.txt`.
-* `A == B` means that A and B include each other the same number of
+- `A == B` means that A and B include each other the same number of
   times, so the script has no clue which should be higher. These results
   will only be included in `loops.txt`.
 
@@ -110,5 +110,5 @@ get those details locally.
 
 1. Run `levelization.sh`
 2. Grep the modules in `paths.txt`.
-   * For example, if a cycle is found `A ~= B`, simply `grep -w
-     A Builds/levelization/results/paths.txt | grep -w B`
+   - For example, if a cycle is found `A ~= B`, simply `grep -w
+A .github/scripts/levelization/results/paths.txt | grep -w B`

.github/scripts/levelization/generate.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# Usage: levelization.sh
+# Usage: generate.sh
 # This script takes no parameters, reads no environment variables,
 # and can be run from any directory, as long as it is in the expected
 # location in the repo.
@@ -13,12 +13,15 @@ then
   git clean -ix
 fi
 
+# Ensure all sorting is ASCII-order consistently across platforms.
+export LANG=C
+
 rm -rfv results
 mkdir results
 includes="$( pwd )/results/rawincludes.txt"
-pushd ../..
+pushd ../../..
 echo Raw includes:
-grep -r '#include.*/.*\.h' src/ripple/ src/test/ | \
+grep -r '^[ ]*#include.*/.*\.h' include src | \
     grep -v boost | tee ${includes}
 popd
 pushd results

.github/scripts/levelization/results/loops.txt

@@ -0,0 +1,30 @@
+Loop: test.jtx test.toplevel
+  test.toplevel > test.jtx
+
+Loop: test.jtx test.unit_test
+  test.unit_test == test.jtx
+
+Loop: xrpld.app xrpld.core
+  xrpld.app > xrpld.core
+
+Loop: xrpld.app xrpld.overlay
+  xrpld.overlay > xrpld.app
+
+Loop: xrpld.app xrpld.peerfinder
+  xrpld.peerfinder ~= xrpld.app
+
+Loop: xrpld.app xrpld.rpc
+  xrpld.rpc > xrpld.app
+
+Loop: xrpld.app xrpld.shamap
+  xrpld.shamap ~= xrpld.app
+
+Loop: xrpld.core xrpld.perflog
+  xrpld.perflog == xrpld.core
+
+Loop: xrpld.overlay xrpld.rpc
+  xrpld.rpc ~= xrpld.overlay
+
+Loop: xrpld.perflog xrpld.rpc
+  xrpld.rpc ~= xrpld.perflog
+

.github/scripts/levelization/results/ordering.txt

@@ -0,0 +1,209 @@
+libxrpl.basics > xrpl.basics
+libxrpl.crypto > xrpl.basics
+libxrpl.json > xrpl.basics
+libxrpl.json > xrpl.json
+libxrpl.ledger > xrpl.basics
+libxrpl.ledger > xrpl.json
+libxrpl.ledger > xrpl.ledger
+libxrpl.ledger > xrpl.protocol
+libxrpl.net > xrpl.basics
+libxrpl.net > xrpl.net
+libxrpl.nodestore > xrpl.basics
+libxrpl.nodestore > xrpl.json
+libxrpl.nodestore > xrpl.nodestore
+libxrpl.nodestore > xrpl.protocol
+libxrpl.protocol > xrpl.basics
+libxrpl.protocol > xrpl.json
+libxrpl.protocol > xrpl.protocol
+libxrpl.resource > xrpl.basics
+libxrpl.resource > xrpl.json
+libxrpl.resource > xrpl.resource
+libxrpl.server > xrpl.basics
+libxrpl.server > xrpl.json
+libxrpl.server > xrpl.protocol
+libxrpl.server > xrpl.server
+libxrpl.shamap > xrpl.basics
+libxrpl.shamap > xrpl.protocol
+libxrpl.shamap > xrpl.shamap
+test.app > test.jtx
+test.app > test.rpc
+test.app > test.toplevel
+test.app > test.unit_test
+test.app > xrpl.basics
+test.app > xrpld.app
+test.app > xrpld.core
+test.app > xrpld.overlay
+test.app > xrpld.rpc
+test.app > xrpl.json
+test.app > xrpl.ledger
+test.app > xrpl.nodestore
+test.app > xrpl.protocol
+test.app > xrpl.resource
+test.basics > test.jtx
+test.basics > test.unit_test
+test.basics > xrpl.basics
+test.basics > xrpld.perflog
+test.basics > xrpld.rpc
+test.basics > xrpl.json
+test.basics > xrpl.protocol
+test.beast > xrpl.basics
+test.conditions > xrpl.basics
+test.conditions > xrpld.conditions
+test.consensus > test.csf
+test.consensus > test.toplevel
+test.consensus > test.unit_test
+test.consensus > xrpl.basics
+test.consensus > xrpld.app
+test.consensus > xrpld.consensus
+test.consensus > xrpl.json
+test.consensus > xrpl.ledger
+test.core > test.jtx
+test.core > test.toplevel
+test.core > test.unit_test
+test.core > xrpl.basics
+test.core > xrpld.core
+test.core > xrpld.perflog
+test.core > xrpl.json
+test.core > xrpl.server
+test.csf > xrpl.basics
+test.csf > xrpld.consensus
+test.csf > xrpl.json
+test.csf > xrpl.protocol
+test.json > test.jtx
+test.json > xrpl.json
+test.jtx > xrpl.basics
+test.jtx > xrpld.app
+test.jtx > xrpld.core
+test.jtx > xrpld.rpc
+test.jtx > xrpl.json
+test.jtx > xrpl.ledger
+test.jtx > xrpl.net
+test.jtx > xrpl.protocol
+test.jtx > xrpl.resource
+test.jtx > xrpl.server
+test.ledger > test.jtx
+test.ledger > test.toplevel
+test.ledger > xrpl.basics
+test.ledger > xrpld.app
+test.ledger > xrpld.core
+test.ledger > xrpl.ledger
+test.ledger > xrpl.protocol
+test.nodestore > test.jtx
+test.nodestore > test.toplevel
+test.nodestore > test.unit_test
+test.nodestore > xrpl.basics
+test.nodestore > xrpld.core
+test.nodestore > xrpl.nodestore
+test.overlay > test.jtx
+test.overlay > test.toplevel
+test.overlay > test.unit_test
+test.overlay > xrpl.basics
+test.overlay > xrpld.app
+test.overlay > xrpld.overlay
+test.overlay > xrpld.peerfinder
+test.overlay > xrpl.protocol
+test.overlay > xrpl.shamap
+test.peerfinder > test.beast
+test.peerfinder > test.unit_test
+test.peerfinder > xrpl.basics
+test.peerfinder > xrpld.core
+test.peerfinder > xrpld.peerfinder
+test.peerfinder > xrpl.protocol
+test.protocol > test.toplevel
+test.protocol > xrpl.basics
+test.protocol > xrpl.json
+test.protocol > xrpl.protocol
+test.resource > test.unit_test
+test.resource > xrpl.basics
+test.resource > xrpl.resource
+test.rpc > test.jtx
+test.rpc > test.toplevel
+test.rpc > xrpl.basics
+test.rpc > xrpld.app
+test.rpc > xrpld.core
+test.rpc > xrpld.overlay
+test.rpc > xrpld.rpc
+test.rpc > xrpl.json
+test.rpc > xrpl.protocol
+test.rpc > xrpl.resource
+test.server > test.jtx
+test.server > test.toplevel
+test.server > test.unit_test
+test.server > xrpl.basics
+test.server > xrpld.app
+test.server > xrpld.core
+test.server > xrpld.rpc
+test.server > xrpl.json
+test.server > xrpl.server
+test.shamap > test.unit_test
+test.shamap > xrpl.basics
+test.shamap > xrpl.nodestore
+test.shamap > xrpl.protocol
+test.shamap > xrpl.shamap
+test.toplevel > test.csf
+test.toplevel > xrpl.json
+test.unit_test > xrpl.basics
+tests.libxrpl > xrpl.basics
+tests.libxrpl > xrpl.json
+tests.libxrpl > xrpl.net
+xrpl.json > xrpl.basics
+xrpl.ledger > xrpl.basics
+xrpl.ledger > xrpl.protocol
+xrpl.net > xrpl.basics
+xrpl.nodestore > xrpl.basics
+xrpl.nodestore > xrpl.protocol
+xrpl.protocol > xrpl.basics
+xrpl.protocol > xrpl.json
+xrpl.resource > xrpl.basics
+xrpl.resource > xrpl.json
+xrpl.resource > xrpl.protocol
+xrpl.server > xrpl.basics
+xrpl.server > xrpl.json
+xrpl.server > xrpl.protocol
+xrpl.shamap > xrpl.basics
+xrpl.shamap > xrpl.nodestore
+xrpl.shamap > xrpl.protocol
+xrpld.app > test.unit_test
+xrpld.app > xrpl.basics
+xrpld.app > xrpld.conditions
+xrpld.app > xrpld.consensus
+xrpld.app > xrpld.perflog
+xrpld.app > xrpl.json
+xrpld.app > xrpl.ledger
+xrpld.app > xrpl.net
+xrpld.app > xrpl.nodestore
+xrpld.app > xrpl.protocol
+xrpld.app > xrpl.resource
+xrpld.app > xrpl.shamap
+xrpld.conditions > xrpl.basics
+xrpld.conditions > xrpl.protocol
+xrpld.consensus > xrpl.basics
+xrpld.consensus > xrpl.json
+xrpld.consensus > xrpl.protocol
+xrpld.core > xrpl.basics
+xrpld.core > xrpl.json
+xrpld.core > xrpl.net
+xrpld.core > xrpl.protocol
+xrpld.overlay > xrpl.basics
+xrpld.overlay > xrpld.core
+xrpld.overlay > xrpld.peerfinder
+xrpld.overlay > xrpld.perflog
+xrpld.overlay > xrpl.json
+xrpld.overlay > xrpl.protocol
+xrpld.overlay > xrpl.resource
+xrpld.overlay > xrpl.server
+xrpld.peerfinder > xrpl.basics
+xrpld.peerfinder > xrpld.core
+xrpld.peerfinder > xrpl.protocol
+xrpld.perflog > xrpl.basics
+xrpld.perflog > xrpl.json
+xrpld.rpc > xrpl.basics
+xrpld.rpc > xrpld.core
+xrpld.rpc > xrpl.json
+xrpld.rpc > xrpl.ledger
+xrpld.rpc > xrpl.net
+xrpld.rpc > xrpl.nodestore
+xrpld.rpc > xrpl.protocol
+xrpld.rpc > xrpl.resource
+xrpld.rpc > xrpl.server
+xrpld.shamap > xrpl.shamap

.github/scripts/strategy-matrix/generate.py

@@ -0,0 +1,197 @@
+#!/usr/bin/env python3
+import argparse
+import itertools
+import json
+from pathlib import Path
+from dataclasses import dataclass
+
+THIS_DIR = Path(__file__).parent.resolve()
+
+@dataclass
+class Config:
+    architecture: list[dict]
+    os: list[dict]
+    build_type: list[str]
+    cmake_args: list[str]
+
+'''
+Generate a strategy matrix for GitHub Actions CI.
+
+On each PR commit we will build a selection of Debian, RHEL, Ubuntu, MacOS, and
+Windows configurations, while upon merge into the develop, release, or master
+branches, we will build all configurations, and test most of them.
+
+We will further set additional CMake arguments as follows:
+- All builds will have the `tests`, `werr`, and `xrpld` options.
+- All builds will have the `wextra` option except for GCC 12 and Clang 16.
+- All release builds will have the `assert` option.
+- Certain Debian Bookworm configurations will change the reference fee, enable
+  codecov, and enable voidstar in PRs.
+'''
+def generate_strategy_matrix(all: bool, config: Config) -> list:
+    configurations = []
+    for architecture, os, build_type, cmake_args in itertools.product(config.architecture, config.os, config.build_type, config.cmake_args):
+        # The default CMake target is 'all' for Linux and MacOS and 'install'
+        # for Windows, but it can get overridden for certain configurations.
+        cmake_target = 'install' if os["distro_name"] == 'windows' else 'all'
+
+        # We build and test all configurations by default, except for Windows in
+        # Debug, because it is too slow, as well as when code coverage is
+        # enabled as that mode already runs the tests.
+        build_only = False
+        if os['distro_name'] == 'windows' and build_type == 'Debug':
+            build_only = True
+
+        # Only generate a subset of configurations in PRs.
+        if not all:
+            # Debian:
+            # - Bookworm using GCC 13: Release and Unity on linux/amd64, set
+            #   the reference fee to 500.
+            # - Bookworm using GCC 15: Debug and no Unity on linux/amd64, enable
+            #   code coverage (which will be done below).
+            # - Bookworm using Clang 16: Debug and no Unity on linux/arm64,
+            #   enable voidstar.
+            # - Bookworm using Clang 17: Release and no Unity on linux/amd64,
+            #   set the reference fee to 1000.
+            # - Bookworm using Clang 20: Debug and Unity on linux/amd64.
+            if os['distro_name'] == 'debian':
+                skip = True
+                if os['distro_version'] == 'bookworm':
+                    if f'{os['compiler_name']}-{os['compiler_version']}' == 'gcc-13' and build_type == 'Release' and '-Dunity=ON' in cmake_args and architecture['platform'] == 'linux/amd64':
+                        cmake_args = f'-DUNIT_TEST_REFERENCE_FEE=500 {cmake_args}'
+                        skip = False
+                    if f'{os['compiler_name']}-{os['compiler_version']}' == 'gcc-15' and build_type == 'Debug' and '-Dunity=OFF' in cmake_args and architecture['platform'] == 'linux/amd64':
+                        skip = False
+                    if f'{os['compiler_name']}-{os['compiler_version']}' == 'clang-16' and build_type == 'Debug' and '-Dunity=OFF' in cmake_args and architecture['platform'] == 'linux/arm64':
+                        cmake_args = f'-Dvoidstar=ON {cmake_args}'
+                        skip = False
+                    if f'{os['compiler_name']}-{os['compiler_version']}' == 'clang-17' and build_type == 'Release' and '-Dunity=ON' in cmake_args and architecture['platform'] == 'linux/amd64':
+                        cmake_args = f'-DUNIT_TEST_REFERENCE_FEE=1000 {cmake_args}'
+                        skip = False
+                    if f'{os['compiler_name']}-{os['compiler_version']}' == 'clang-20' and build_type == 'Debug' and '-Dunity=ON' in cmake_args and architecture['platform'] == 'linux/amd64':
+                        skip = False
+                if skip:
+                    continue
+
+            # RHEL:
+            # - 9 using GCC 12: Debug and Unity on linux/amd64.
+            # - 10 using Clang: Release and no Unity on linux/amd64.
+            if os['distro_name'] == 'rhel':
+                skip = True
+                if os['distro_version'] == '9':
+                    if f'{os['compiler_name']}-{os['compiler_version']}' == 'gcc-12' and build_type == 'Debug' and '-Dunity=ON' in cmake_args and architecture['platform'] == 'linux/amd64':
+                        skip = False
+                elif os['distro_version'] == '10':
+                    if f'{os['compiler_name']}-{os['compiler_version']}' == 'clang-any' and build_type == 'Release' and '-Dunity=OFF' in cmake_args and architecture['platform'] == 'linux/amd64':
+                        skip = False
+                if skip:
+                    continue
+
+            # Ubuntu:
+            # - Jammy using GCC 12: Debug and no Unity on linux/arm64.
+            # - Noble using GCC 14: Release and Unity on linux/amd64.
+            # - Noble using Clang 18: Debug and no Unity on linux/amd64.
+            # - Noble using Clang 19: Release and Unity on linux/arm64.
+            if os['distro_name'] == 'ubuntu':
+                skip = True
+                if os['distro_version'] == 'jammy':
+                    if f'{os['compiler_name']}-{os['compiler_version']}' == 'gcc-12' and build_type == 'Debug' and '-Dunity=OFF' in cmake_args and architecture['platform'] == 'linux/arm64':
+                        skip = False
+                elif os['distro_version'] == 'noble':
+                    if f'{os['compiler_name']}-{os['compiler_version']}' == 'gcc-14' and build_type == 'Release' and '-Dunity=ON' in cmake_args and architecture['platform'] == 'linux/amd64':
+                        skip = False
+                    if f'{os['compiler_name']}-{os['compiler_version']}' == 'clang-18' and build_type == 'Debug' and '-Dunity=OFF' in cmake_args and architecture['platform'] == 'linux/amd64':
+                        skip = False
+                    if f'{os['compiler_name']}-{os['compiler_version']}' == 'clang-19' and build_type == 'Release' and '-Dunity=ON' in cmake_args and architecture['platform'] == 'linux/arm64':
+                        skip = False
+                if skip:
+                    continue
+
+            # MacOS:
+            # - Debug and no Unity on macos/arm64.
+            if os['distro_name'] == 'macos' and not (build_type == 'Debug' and '-Dunity=OFF' in cmake_args and architecture['platform'] == 'macos/arm64'):
+                continue
+
+            # Windows:
+            # - Release and Unity on windows/amd64.
+            if os['distro_name'] == 'windows' and not (build_type == 'Release' and '-Dunity=ON' in cmake_args and architecture['platform'] == 'windows/amd64'):
+                continue
+
+
+        # Additional CMake arguments.
+        cmake_args = f'{cmake_args} -Dtests=ON -Dwerr=ON -Dxrpld=ON'
+        if not f'{os['compiler_name']}-{os['compiler_version']}' in ['gcc-12', 'clang-16']:
+            cmake_args = f'{cmake_args} -Dwextra=ON'
+        if build_type == 'Release':
+            cmake_args = f'{cmake_args} -Dassert=ON'
+
+        # We skip all RHEL on arm64 due to a build failure that needs further
+        # investigation.
+        if os['distro_name'] == 'rhel' and architecture['platform'] == 'linux/arm64':
+            continue
+
+        # We skip all clang-20 on arm64 due to boost 1.86 build error
+        if f'{os['compiler_name']}-{os['compiler_version']}' == 'clang-20' and architecture['platform'] == 'linux/arm64':
+            continue
+
+        # Enable code coverage for Debian Bookworm using GCC 15 in Debug and no
+        # Unity on linux/amd64
+        if f'{os['compiler_name']}-{os['compiler_version']}' == 'gcc-15' and build_type == 'Debug' and '-Dunity=OFF' in cmake_args and architecture['platform'] == 'linux/amd64':
+            cmake_args = f'-Dcoverage=ON -Dcoverage_format=xml -DCODE_COVERAGE_VERBOSE=ON -DCMAKE_C_FLAGS=-O0 -DCMAKE_CXX_FLAGS=-O0 {cmake_args}'
+            cmake_target = 'coverage'
+            build_only = True
+
+        # Generate a unique name for the configuration, e.g. macos-arm64-debug
+        # or debian-bookworm-gcc-12-amd64-release-unity.
+        config_name = os['distro_name']
+        if (n := os['distro_version']) != '':
+            config_name += f'-{n}'
+        if (n := os['compiler_name']) != '':
+            config_name += f'-{n}'
+        if (n := os['compiler_version']) != '':
+            config_name += f'-{n}'
+        config_name += f'-{architecture['platform'][architecture['platform'].find('/')+1:]}'
+        config_name += f'-{build_type.lower()}'
+        if '-Dunity=ON' in cmake_args:
+            config_name += '-unity'
+
+        # Add the configuration to the list, with the most unique fields first,
+        # so that they are easier to identify in the GitHub Actions UI, as long
+        # names get truncated.
+        configurations.append({
+            'config_name': config_name,
+            'cmake_args': cmake_args,
+            'cmake_target': cmake_target,
+            'build_only': build_only,
+            'build_type': build_type,
+            'os': os,
+            'architecture': architecture,
+        })
+
+    return configurations
+
+
+def read_config(file: Path) -> Config:
+    config = json.loads(file.read_text())
+    if config['architecture'] is None or config['os'] is None or config['build_type'] is None or config['cmake_args'] is None:
+        raise Exception('Invalid configuration file.')
+
+    return Config(**config)
+
+
+if __name__ == '__main__':
+    parser = argparse.ArgumentParser()
+    parser.add_argument('-a', '--all', help='Set to generate all configurations (generally used when merging a PR) or leave unset to generate a subset of configurations (generally used when committing to a PR).', action="store_true")
+    parser.add_argument('-c', '--config', help='Path to the JSON file containing the strategy matrix configurations.', required=False, type=Path)
+    args = parser.parse_args()
+
+    matrix = []
+    if args.config is None or args.config == '':
+        matrix += generate_strategy_matrix(args.all, read_config(THIS_DIR / "linux.json"))
+        matrix += generate_strategy_matrix(args.all, read_config(THIS_DIR / "macos.json"))
+        matrix += generate_strategy_matrix(args.all, read_config(THIS_DIR / "windows.json"))
+    else:
+        matrix += generate_strategy_matrix(args.all, read_config(args.config))
+
+    # Generate the strategy matrix.
+    print(f'matrix={json.dumps({"include": matrix})}')

.github/scripts/strategy-matrix/linux.json

@@ -0,0 +1,184 @@
+{
+  "architecture": [
+    {
+      "platform": "linux/amd64",
+      "runner": ["self-hosted", "Linux", "X64", "heavy"]
+    },
+    {
+      "platform": "linux/arm64",
+      "runner": ["self-hosted", "Linux", "ARM64", "heavy-arm64"]
+    }
+  ],
+  "os": [
+    {
+      "distro_name": "debian",
+      "distro_version": "bookworm",
+      "compiler_name": "gcc",
+      "compiler_version": "12",
+      "image_sha": "97ba375"
+    },
+    {
+      "distro_name": "debian",
+      "distro_version": "bookworm",
+      "compiler_name": "gcc",
+      "compiler_version": "13",
+      "image_sha": "97ba375"
+    },
+    {
+      "distro_name": "debian",
+      "distro_version": "bookworm",
+      "compiler_name": "gcc",
+      "compiler_version": "14",
+      "image_sha": "97ba375"
+    },
+    {
+      "distro_name": "debian",
+      "distro_version": "bookworm",
+      "compiler_name": "gcc",
+      "compiler_version": "15",
+      "image_sha": "97ba375"
+    },
+    {
+      "distro_name": "debian",
+      "distro_version": "bookworm",
+      "compiler_name": "clang",
+      "compiler_version": "16",
+      "image_sha": "97ba375"
+    },
+    {
+      "distro_name": "debian",
+      "distro_version": "bookworm",
+      "compiler_name": "clang",
+      "compiler_version": "17",
+      "image_sha": "97ba375"
+    },
+    {
+      "distro_name": "debian",
+      "distro_version": "bookworm",
+      "compiler_name": "clang",
+      "compiler_version": "18",
+      "image_sha": "97ba375"
+    },
+    {
+      "distro_name": "debian",
+      "distro_version": "bookworm",
+      "compiler_name": "clang",
+      "compiler_version": "19",
+      "image_sha": "97ba375"
+    },
+    {
+      "distro_name": "debian",
+      "distro_version": "bookworm",
+      "compiler_name": "clang",
+      "compiler_version": "20",
+      "image_sha": "97ba375"
+    },
+    {
+      "distro_name": "rhel",
+      "distro_version": "8",
+      "compiler_name": "gcc",
+      "compiler_version": "14",
+      "image_sha": "97ba375"
+    },
+    {
+      "distro_name": "rhel",
+      "distro_version": "8",
+      "compiler_name": "clang",
+      "compiler_version": "any",
+      "image_sha": "97ba375"
+    },
+    {
+      "distro_name": "rhel",
+      "distro_version": "9",
+      "compiler_name": "gcc",
+      "compiler_version": "12",
+      "image_sha": "97ba375"
+    },
+    {
+      "distro_name": "rhel",
+      "distro_version": "9",
+      "compiler_name": "gcc",
+      "compiler_version": "13",
+      "image_sha": "97ba375"
+    },
+    {
+      "distro_name": "rhel",
+      "distro_version": "9",
+      "compiler_name": "gcc",
+      "compiler_version": "14",
+      "image_sha": "97ba375"
+    },
+    {
+      "distro_name": "rhel",
+      "distro_version": "9",
+      "compiler_name": "clang",
+      "compiler_version": "any",
+      "image_sha": "97ba375"
+    },
+    {
+      "distro_name": "rhel",
+      "distro_version": "10",
+      "compiler_name": "gcc",
+      "compiler_version": "14",
+      "image_sha": "97ba375"
+    },
+    {
+      "distro_name": "rhel",
+      "distro_version": "10",
+      "compiler_name": "clang",
+      "compiler_version": "any",
+      "image_sha": "97ba375"
+    },
+    {
+      "distro_name": "ubuntu",
+      "distro_version": "jammy",
+      "compiler_name": "gcc",
+      "compiler_version": "12",
+      "image_sha": "97ba375"
+    },
+    {
+      "distro_name": "ubuntu",
+      "distro_version": "noble",
+      "compiler_name": "gcc",
+      "compiler_version": "13",
+      "image_sha": "97ba375"
+    },
+    {
+      "distro_name": "ubuntu",
+      "distro_version": "noble",
+      "compiler_name": "gcc",
+      "compiler_version": "14",
+      "image_sha": "97ba375"
+    },
+    {
+      "distro_name": "ubuntu",
+      "distro_version": "noble",
+      "compiler_name": "clang",
+      "compiler_version": "16",
+      "image_sha": "97ba375"
+    },
+    {
+      "distro_name": "ubuntu",
+      "distro_version": "noble",
+      "compiler_name": "clang",
+      "compiler_version": "17",
+      "image_sha": "97ba375"
+    },
+    {
+      "distro_name": "ubuntu",
+      "distro_version": "noble",
+      "compiler_name": "clang",
+      "compiler_version": "18",
+      "image_sha": "97ba375"
+    },
+    {
+      "distro_name": "ubuntu",
+      "distro_version": "noble",
+      "compiler_name": "clang",
+      "compiler_version": "19",
+      "image_sha": "97ba375"
+    }
+  ],
+  "build_type": ["Debug", "Release"],
+  "cmake_args": ["-Dunity=OFF", "-Dunity=ON"]
+}

.github/scripts/strategy-matrix/macos.json

@@ -0,0 +1,22 @@
+{
+  "architecture": [
+    {
+      "platform": "macos/arm64",
+      "runner": ["self-hosted", "macOS", "ARM64", "mac-runner-m1"]
+    }
+  ],
+  "os": [
+    {
+      "distro_name": "macos",
+      "distro_version": "",
+      "compiler_name": "",
+      "compiler_version": "",
+      "image_sha": ""
+    }
+  ],
+  "build_type": ["Debug", "Release"],
+  "cmake_args": [
+    "-Dunity=OFF -DCMAKE_POLICY_VERSION_MINIMUM=3.5",
+    "-Dunity=ON -DCMAKE_POLICY_VERSION_MINIMUM=3.5"
+  ]
+}

.github/scripts/strategy-matrix/windows.json

@@ -0,0 +1,19 @@
+{
+  "architecture": [
+    {
+      "platform": "windows/amd64",
+      "runner": ["self-hosted", "Windows", "devbox"]
+    }
+  ],
+  "os": [
+    {
+      "distro_name": "windows",
+      "distro_version": "",
+      "compiler_name": "",
+      "compiler_version": "",
+      "image_sha": ""
+    }
+  ],
+  "build_type": ["Debug", "Release"],
+  "cmake_args": ["-Dunity=OFF", "-Dunity=ON"]
+}

.github/workflows/clang-format.yml

@@ -1,61 +0,0 @@
-name: clang-format
-
-on: [push, pull_request]
-
-jobs:
-  check:
-    runs-on: ubuntu-20.04
-    env:
-      CLANG_VERSION: 10
-    steps:
-    - uses: actions/checkout@v3
-    - name: Install clang-format
-      run: |
-        codename=$( lsb_release --codename --short )
-        sudo tee /etc/apt/sources.list.d/llvm.list >/dev/null <<EOF
-        deb http://apt.llvm.org/${codename}/ llvm-toolchain-${codename}-${CLANG_VERSION} main
-        deb-src http://apt.llvm.org/${codename}/ llvm-toolchain-${codename}-${CLANG_VERSION} main
-        EOF
-        wget -O - https://apt.llvm.org/llvm-snapshot.gpg.key | sudo apt-key add
-        sudo apt-get update
-        sudo apt-get install clang-format-${CLANG_VERSION}
-    - name: Format src/ripple
-      run: find src/ripple -type f \( -name '*.cpp' -o -name '*.h' -o -name '*.ipp' \) -print0 | xargs -0 clang-format-${CLANG_VERSION} -i
-    - name: Format src/test
-      run: find src/test -type f \( -name '*.cpp' -o -name '*.h' -o -name '*.ipp' \) -print0 | xargs -0 clang-format-${CLANG_VERSION} -i
-    - name: Check for differences
-      id: assert
-      run: |
-        set -o pipefail
-        git diff --exit-code | tee "clang-format.patch"
-    - name: Upload patch
-      if: failure() && steps.assert.outcome == 'failure'
-      uses: actions/upload-artifact@v2
-      continue-on-error: true
-      with:
-        name: clang-format.patch
-        if-no-files-found: ignore
-        path: clang-format.patch
-    - name: What happened?
-      if: failure() && steps.assert.outcome == 'failure'
-      env:
-        PREAMBLE: |
-          If you are reading this, you are looking at a failed Github Actions
-          job.  That means you pushed one or more files that did not conform
-          to the formatting specified in .clang-format. That may be because
-          you neglected to run 'git clang-format' or 'clang-format' before
-          committing, or that your version of clang-format has an
-          incompatibility with the one on this
-          machine, which is:
-        SUGGESTION: |
-
-          To fix it, you can do one of two things:
-          1. Download and apply the patch generated as an artifact of this
-             job to your repo, commit, and push.
-          2. Run 'git-clang-format --extensions c,cpp,h,cxx,ipp develop'
-             in your repo, commit, and push.
-      run: |
-        echo "${PREAMBLE}"
-        clang-format-${CLANG_VERSION} --version
-        echo "${SUGGESTION}"
-        exit 1

.github/workflows/doxygen.yml

@@ -1,37 +0,0 @@
-name: Build and publish Doxygen documentation
-# To test this workflow, push your changes to your fork's `develop` branch.
-on:
-  push:
-    branches:
-      - develop
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-
-jobs:
-  job:
-    runs-on: ubuntu-latest
-    permissions:
-      contents: write
-    container:
-      image: docker://rippleci/rippled-ci-builder:2944b78d22db
-    steps:
-      - name: checkout
-        uses: actions/checkout@v3
-      - name: check environment
-        run: |
-          echo ${PATH} | tr ':' '\n'
-          cmake --version
-          doxygen --version
-          env | sort
-      - name: build
-        run: |
-          mkdir build
-          cd build
-          cmake -Donly_docs=TRUE ..
-          cmake --build . --target docs --parallel $(nproc)
-      - name: publish
-        uses: peaceiris/actions-gh-pages@v3
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          publish_dir: build/docs/html

.github/workflows/levelization.yml

@@ -1,49 +0,0 @@
-name: levelization
-
-on: [push, pull_request]
-
-jobs:
-  check:
-    runs-on: ubuntu-latest
-    env:
-      CLANG_VERSION: 10
-    steps:
-    - uses: actions/checkout@v3
-    - name: Check levelization
-      run: Builds/levelization/levelization.sh
-    - name: Check for differences
-      id: assert
-      run: |
-        set -o pipefail
-        git diff --exit-code | tee "levelization.patch"
-    - name: Upload patch
-      if: failure() && steps.assert.outcome == 'failure'
-      uses: actions/upload-artifact@v2
-      continue-on-error: true
-      with:
-        name: levelization.patch
-        if-no-files-found: ignore
-        path: levelization.patch
-    - name: What happened?
-      if: failure() && steps.assert.outcome == 'failure'
-      env:
-        MESSAGE: |
-          If you are reading this, you are looking at a failed Github
-          Actions job. That means you changed the dependency relationships
-          between the modules in rippled. That may be an improvement or a
-          regression. This check doesn't judge.
-
-          A rule of thumb, though, is that if your changes caused
-          something to be removed from loops.txt, that's probably an
-          improvement. If something was added, it's probably a regression.
-
-          To fix it, you can do one of two things:
-          1. Download and apply the patch generated as an artifact of this
-             job to your repo, commit, and push.
-          2. Run './Builds/levelization/levelization.sh' in your repo,
-             commit, and push.
-
-          See Builds/levelization/README.md for more info.
-      run: |
-        echo "${MESSAGE}"
-        exit 1

.github/workflows/macos.yml

@@ -1,51 +0,0 @@
-name: macos
-on: [push, pull_request]
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-
-jobs:
-
-  test:
-    strategy:
-      matrix:
-        platform:
-          - macos
-        generator:
-          - Ninja
-        configuration:
-          - Release
-    runs-on: [self-hosted, macOS]
-    env:
-      # The `build` action requires these variables.
-      build_dir: .build
-      NUM_PROCESSORS: 12
-    steps:
-      - name: checkout
-        uses: actions/checkout@v3
-      - name: install Ninja
-        if: matrix.generator == 'Ninja'
-        run: brew install ninja
-      - name: check environment
-        run: |
-          echo ${PATH} | tr ':' '\n'
-          python --version
-          conan --version
-          cmake --version
-          env | sort
-      - name: configure Conan
-        run : |
-          conan profile get env.CXXFLAGS default || true
-          conan profile update 'conf.tools.build:cxxflags+=["-DBOOST_ASIO_DISABLE_CONCEPTS"]' default
-      - name: dependencies
-        uses: ./.github/actions/dependencies
-        with:
-          configuration: ${{ matrix.configuration }}
-      - name: build
-        uses: ./.github/actions/build
-        with:
-          generator: ${{ matrix.generator }}
-          configuration: ${{ matrix.configuration }}
-      - name: test
-        run: |
-          ${build_dir}/rippled --unittest

.github/workflows/nix.yml

@@ -1,161 +0,0 @@
-name: nix
-on: [push, pull_request]
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-
-# This workflow has two job matrixes.
-# They can be considered phases because the second matrix ("test")
-# depends on the first ("dependencies").
-#
-# The first phase has a job in the matrix for each combination of
-# variables that affects dependency ABI:
-# platform, compiler, and configuration.
-# It creates a GitHub artifact holding the Conan profile,
-# and builds and caches binaries for all the dependencies.
-# If an Artifactory remote is configured, they are cached there.
-# If not, they are added to the GitHub artifact.
-# GitHub's "cache" action has a size limit (10 GB) that is too small
-# to hold the binaries if they are built locally.
-# We must use the "{upload,download}-artifact" actions instead.
-#
-# The second phase has a job in the matrix for each test configuration.
-# It installs dependency binaries from the cache, whichever was used,
-# and builds and tests rippled.
-
-jobs:
-
-  dependencies:
-    strategy:
-      fail-fast: false
-      matrix:
-        platform:
-          - linux
-        compiler:
-          - gcc
-          - clang
-        configuration:
-          - Debug
-          - Release
-        include:
-          - compiler: gcc
-            profile:
-              version: 11
-              cc: /usr/bin/gcc
-              cxx: /usr/bin/g++
-          - compiler: clang
-            profile:
-              version: 14
-              cc: /usr/bin/clang-14
-              cxx: /usr/bin/clang++-14
-    runs-on: [self-hosted, heavy]
-    container: thejohnfreeman/rippled-build-ubuntu:12e19cd9034b
-    env:
-      build_dir: .build
-    steps:
-      - name: checkout
-        uses: actions/checkout@v3
-      - name: check environment
-        run: |
-          echo ${PATH} | tr ':' '\n'
-          conan --version
-          cmake --version
-          env | sort
-      - name: configure Conan
-        env:
-          CONAN_URL: http://18.143.149.228:8081/artifactory/api/conan/conan-non-prod
-        run: |
-          conan profile new default --detect
-          conan profile update settings.compiler.cppstd=20 default
-          conan profile update settings.compiler=${{ matrix.compiler }} default
-          conan profile update settings.compiler.version=${{ matrix.profile.version }} default
-          conan profile update settings.compiler.libcxx=libstdc++11 default
-          conan profile update env.CC=${{ matrix.profile.cc }} default
-          conan profile update env.CXX=${{ matrix.profile.cxx }} default
-          conan profile update conf.tools.build:compiler_executables='{"c": "${{ matrix.profile.cc }}", "cpp": "${{ matrix.profile.cxx }}"}' default
-          # Do not quote the URL. An empty string will be accepted (with
-          # a non-fatal warning), but a missing argument will not.
-          conan remote add ripple ${{ env.CONAN_URL }} --insert 0
-      - name: try to authenticate to ripple Conan remote
-        id: remote
-        run: |
-          echo outcome=$(conan user --remote ripple ${{ secrets.CONAN_USERNAME }} --password ${{ secrets.CONAN_TOKEN }} >&2 && echo success || echo failure) | tee ${GITHUB_OUTPUT}
-      - name: archive profile
-        # Create this archive before dependencies are added to the local cache.
-        run: tar -czf conan.tar -C ~/.conan .
-      - name: list missing binaries
-        id: binaries
-        # Print the list of dependencies that would need to be built locally.
-        # A non-empty list means we have "failed" to cache binaries remotely.
-        run: |
-          echo missing=$(conan info . --build missing --settings build_type=${{ matrix.configuration }} --json 2>/dev/null  | grep '^\[') | tee ${GITHUB_OUTPUT}
-      - name: build dependencies
-        if: (steps.binaries.outputs.missing != '[]')
-        uses: ./.github/actions/dependencies
-        with:
-          configuration: ${{ matrix.configuration }}
-      - name: upload dependencies to remote
-        if: (steps.binaries.outputs.missing != '[]') && (steps.remote.outputs.outcome == 'success')
-        run: conan upload --remote ripple '*' --all --parallel --confirm
-      - name: recreate archive with dependencies
-        if: (steps.binaries.outputs.missing != '[]') && (steps.remote.outputs.outcome == 'failure')
-        run: tar -czf conan.tar -C ~/.conan .
-      - name: upload archive
-        uses: actions/upload-artifact@v3
-        with:
-          name: ${{ matrix.platform }}-${{ matrix.compiler }}-${{ matrix.configuration }}
-          path: conan.tar
-          if-no-files-found: error
-
-
-  test:
-    strategy:
-      fail-fast: false
-      matrix:
-        platform:
-          - linux
-        compiler:
-          - gcc
-          - clang
-        configuration:
-          - Debug
-          - Release
-        cmake-args:
-          -
-          - "-Dunity=ON"
-    needs: dependencies
-    runs-on: [self-hosted, heavy]
-    container: thejohnfreeman/rippled-build-ubuntu:12e19cd9034b
-    env:
-      build_dir: .build
-    steps:
-      - name: download cache
-        uses: actions/download-artifact@v3
-        with:
-          name: ${{ matrix.platform }}-${{ matrix.compiler }}-${{ matrix.configuration }}
-      - name: extract cache
-        run: |
-          mkdir -p ~/.conan
-          tar -xzf conan.tar -C ~/.conan
-      - name: check environment
-        run: |
-          echo ${PATH} | tr ':' '\n'
-          conan --version
-          cmake --version
-          env | sort
-          ls ~/.conan
-      - name: checkout
-        uses: actions/checkout@v3
-      - name: dependencies
-        uses: ./.github/actions/dependencies
-        with:
-          configuration: ${{ matrix.configuration }}
-      - name: build
-        uses: ./.github/actions/build
-        with:
-          generator: Ninja
-          configuration: ${{ matrix.configuration }}
-          cmake-args: ${{ matrix.cmake-args }}
-      - name: test
-        run: |
-          ${build_dir}/rippled --unittest --unittest-jobs $(nproc)

.github/workflows/on-pr.yml

@@ -0,0 +1,133 @@
+# This workflow runs all workflows to check, build and test the project on
+# various Linux flavors, as well as on MacOS and Windows, on every push to a
+# user branch. However, it will not run if the pull request is a draft unless it
+# has the 'DraftRunCI' label.
+name: PR
+
+on:
+  merge_group:
+    types:
+      - checks_requested
+  pull_request:
+    types:
+      - opened
+      - reopened
+      - synchronize
+      - ready_for_review
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+defaults:
+  run:
+    shell: bash
+
+jobs:
+  # This job determines whether the rest of the workflow should run. It runs
+  # when the PR is not a draft (which should also cover merge-group) or
+  # has the 'DraftRunCI' label.
+  should-run:
+    if: ${{ !github.event.pull_request.draft || contains(github.event.pull_request.labels.*.name, 'DraftRunCI') }}
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@08eba0b27e820071cde6df949e0beb9ba4906955 # v4.3.0
+      - name: Determine changed files
+        # This step checks whether any files have changed that should
+        # cause the next jobs to run. We do it this way rather than
+        # using `paths` in the `on:` section, because all required
+        # checks must pass, even for changes that do not modify anything
+        # that affects those checks. We would therefore like to make the
+        # checks required only if the job runs, but GitHub does not
+        # support that directly. By always executing the workflow on new
+        # commits and by using the changed-files action below, we ensure
+        # that Github considers any skipped jobs to have passed, and in
+        # turn the required checks as well.
+        id: changes
+        uses: tj-actions/changed-files@ed68ef82c095e0d48ec87eccea555d944a631a4c # v46.0.5
+        with:
+          files: |
+            # These paths are unique to `on-pr.yml`.
+            .github/scripts/levelization/**
+            .github/workflows/reusable-check-levelization.yml
+            .github/workflows/reusable-notify-clio.yml
+            .github/workflows/on-pr.yml
+
+            # Keep the paths below in sync with those in `on-trigger.yml`.
+            .github/actions/build-deps/**
+            .github/actions/build-test/**
+            .github/actions/setup-conan/**
+            .github/scripts/strategy-matrix/**
+            .github/workflows/reusable-build.yml
+            .github/workflows/reusable-build-test-config.yml
+            .github/workflows/reusable-build-test.yml
+            .github/workflows/reusable-strategy-matrix.yml
+            .github/workflows/reusable-test.yml
+            .codecov.yml
+            cmake/**
+            conan/**
+            external/**
+            include/**
+            src/**
+            tests/**
+            CMakeLists.txt
+            conanfile.py
+            conan.lock
+      - name: Check whether to run
+        # This step determines whether the rest of the workflow should
+        # run. The rest of the workflow will run if this job runs AND at
+        # least one of:
+        # * Any of the files checked in the `changes` step were modified
+        # * The PR is NOT a draft and is labeled "Ready to merge"
+        # * The workflow is running from the merge queue
+        id: go
+        env:
+          FILES: ${{ steps.changes.outputs.any_changed }}
+          DRAFT: ${{ github.event.pull_request.draft }}
+          READY: ${{ contains(github.event.pull_request.labels.*.name, 'Ready to merge') }}
+          MERGE: ${{ github.event_name == 'merge_group' }}
+        run: |
+          echo "go=${{ (env.DRAFT != 'true' && env.READY == 'true') || env.FILES == 'true' || env.MERGE == 'true' }}" >> "${GITHUB_OUTPUT}"
+          cat "${GITHUB_OUTPUT}"
+    outputs:
+      go: ${{ steps.go.outputs.go == 'true' }}
+
+  check-levelization:
+    needs: should-run
+    if: ${{ needs.should-run.outputs.go == 'true' }}
+    uses: ./.github/workflows/reusable-check-levelization.yml
+
+  build-test:
+    needs: should-run
+    if: ${{ needs.should-run.outputs.go == 'true' }}
+    uses: ./.github/workflows/reusable-build-test.yml
+    strategy:
+      fail-fast: false
+      matrix:
+        os: [linux, macos, windows]
+    with:
+      os: ${{ matrix.os }}
+    secrets:
+      CODECOV_TOKEN: ${{ secrets.CODECOV_TOKEN }}
+
+  notify-clio:
+    needs:
+      - should-run
+      - build-test
+    if: ${{ needs.should-run.outputs.go == 'true' && contains(fromJSON('["release", "master"]'), github.ref_name) }}
+    uses: ./.github/workflows/reusable-notify-clio.yml
+    secrets:
+      clio_notify_token: ${{ secrets.CLIO_NOTIFY_TOKEN }}
+      conan_remote_username: ${{ secrets.CONAN_REMOTE_USERNAME }}
+      conan_remote_password: ${{ secrets.CONAN_REMOTE_PASSWORD }}
+
+  passed:
+    if: failure() || cancelled()
+    needs:
+      - build-test
+      - check-levelization
+    runs-on: ubuntu-latest
+    steps:
+      - name: Fail
+        run: false

.github/workflows/on-trigger.yml

@@ -0,0 +1,80 @@
+# This workflow runs all workflows to build the dependencies required for the
+# project on various Linux flavors, as well as on MacOS and Windows, on a
+# scheduled basis, on merge into the 'develop', 'release', or 'master' branches,
+# or manually. The missing commits check is only run when the code is merged
+# into the 'develop' or 'release' branches, and the documentation is built when
+# the code is merged into the 'develop' branch.
+name: Trigger
+
+on:
+  push:
+    branches:
+      - "develop"
+      - "release*"
+      - "master"
+    paths:
+      # These paths are unique to `on-trigger.yml`.
+      - ".github/workflows/reusable-check-missing-commits.yml"
+      - ".github/workflows/on-trigger.yml"
+      - ".github/workflows/publish-docs.yml"
+
+      # Keep the paths below in sync with those in `on-pr.yml`.
+      - ".github/actions/build-deps/**"
+      - ".github/actions/build-test/**"
+      - ".github/actions/setup-conan/**"
+      - ".github/scripts/strategy-matrix/**"
+      - ".github/workflows/reusable-build.yml"
+      - ".github/workflows/reusable-build-test-config.yml"
+      - ".github/workflows/reusable-build-test.yml"
+      - ".github/workflows/reusable-strategy-matrix.yml"
+      - ".github/workflows/reusable-test.yml"
+      - ".codecov.yml"
+      - "cmake/**"
+      - "conan/**"
+      - "external/**"
+      - "include/**"
+      - "src/**"
+      - "tests/**"
+      - "CMakeLists.txt"
+      - "conanfile.py"
+      - "conan.lock"
+
+  # Run at 06:32 UTC on every day of the week from Monday through Friday. This
+  # will force all dependencies to be rebuilt, which is useful to verify that
+  # all dependencies can be built successfully. Only the dependencies that
+  # are actually missing from the remote will be uploaded.
+  schedule:
+    - cron: "32 6 * * 1-5"
+
+  # Run when manually triggered via the GitHub UI or API.
+  workflow_dispatch:
+
+concurrency:
+  # When a PR is merged into the develop branch it will be assigned a unique
+  # group identifier, so execution will continue even if another PR is merged
+  # while it is still running. In all other cases the group identifier is shared
+  # per branch, so that any in-progress runs are cancelled when a new commit is
+  # pushed.
+  group: ${{ github.workflow }}-${{ github.event_name == 'push' && github.ref == 'refs/heads/develop' && github.sha || github.ref }}
+  cancel-in-progress: true
+
+defaults:
+  run:
+    shell: bash
+
+jobs:
+  check-missing-commits:
+    if: ${{ github.event_name == 'push' && github.ref_type == 'branch' && contains(fromJSON('["develop", "release"]'), github.ref_name) }}
+    uses: ./.github/workflows/reusable-check-missing-commits.yml
+
+  build-test:
+    uses: ./.github/workflows/reusable-build-test.yml
+    strategy:
+      fail-fast: ${{ github.event_name == 'merge_group' }}
+      matrix:
+        os: [linux, macos, windows]
+    with:
+      os: ${{ matrix.os }}
+      strategy_matrix: ${{ github.event_name == 'schedule' && 'all' || 'minimal' }}
+    secrets:
+      CODECOV_TOKEN: ${{ secrets.CODECOV_TOKEN }}

.github/workflows/pre-commit.yml

@@ -0,0 +1,15 @@
+name: Run pre-commit hooks
+
+on:
+  pull_request:
+  push:
+    branches: [develop, release, master]
+  workflow_dispatch:
+
+jobs:
+  # Call the workflow in the XRPLF/actions repo that runs the pre-commit hooks.
+  run-hooks:
+    uses: XRPLF/actions/.github/workflows/pre-commit.yml@34790936fae4c6c751f62ec8c06696f9c1a5753a
+    with:
+      runs_on: ubuntu-latest
+      container: '{ "image": "ghcr.io/xrplf/ci/tools-rippled-pre-commit:sha-a8c7be1" }'

.github/workflows/publish-docs.yml

@@ -0,0 +1,72 @@
+# This workflow builds the documentation for the repository, and publishes it to
+# GitHub Pages when changes are merged into the default branch.
+name: Build and publish documentation
+
+on:
+  push:
+    paths:
+      - ".github/workflows/publish-docs.yml"
+      - "*.md"
+      - "**/*.md"
+      - "docs/**"
+      - "include/**"
+      - "src/libxrpl/**"
+      - "src/xrpld/**"
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+defaults:
+  run:
+    shell: bash
+
+env:
+  BUILD_DIR: .build
+  NPROC_SUBTRACT: 2
+
+jobs:
+  publish:
+    runs-on: ubuntu-latest
+    container: ghcr.io/xrplf/ci/tools-rippled-documentation:sha-a8c7be1
+    permissions:
+      contents: write
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@08eba0b27e820071cde6df949e0beb9ba4906955 # v4.3.0
+
+      - name: Get number of processors
+        uses: XRPLF/actions/.github/actions/get-nproc@046b1620f6bfd6cd0985dc82c3df02786801fe0a
+        id: nproc
+        with:
+          subtract: ${{ env.NPROC_SUBTRACT }}
+
+      - name: Check configuration
+        run: |
+          echo 'Checking path.'
+          echo ${PATH} | tr ':' '\n'
+
+          echo 'Checking environment variables.'
+          env | sort
+
+          echo 'Checking CMake version.'
+          cmake --version
+
+          echo 'Checking Doxygen version.'
+          doxygen --version
+
+      - name: Build documentation
+        env:
+          BUILD_NPROC: ${{ steps.nproc.outputs.nproc }}
+        run: |
+          mkdir -p "${BUILD_DIR}"
+          cd "${BUILD_DIR}"
+          cmake -Donly_docs=ON ..
+          cmake --build . --target docs --parallel ${BUILD_NPROC}
+
+      - name: Publish documentation
+        if: ${{ github.ref_type == 'branch' && github.ref_name == github.event.repository.default_branch }}
+        uses: peaceiris/actions-gh-pages@4f9cc6602d3f66b9c108549d475ec49e8ef4d45e # v4.0.0
+        with:
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          publish_dir: ${{ env.BUILD_DIR }}/docs/html

.github/workflows/reusable-build-test-config.yml

@@ -0,0 +1,77 @@
+name: Build and test configuration
+
+on:
+  workflow_call:
+    inputs:
+      build_dir:
+        description: "The directory where to build."
+        required: true
+        type: string
+      build_only:
+        description: 'Whether to only build or to build and test the code ("true", "false").'
+        required: true
+        type: boolean
+      build_type:
+        description: 'The build type to use ("Debug", "Release").'
+        type: string
+        required: true
+      cmake_args:
+        description: "Additional arguments to pass to CMake."
+        required: false
+        type: string
+        default: ""
+      cmake_target:
+        description: "The CMake target to build."
+        type: string
+        required: true
+
+      runs_on:
+        description: Runner to run the job on as a JSON string
+        required: true
+        type: string
+      image:
+        description: "The image to run in (leave empty to run natively)"
+        required: true
+        type: string
+
+      config_name:
+        description: "The configuration string (used for naming artifacts and such)."
+        required: true
+        type: string
+
+      nproc_subtract:
+        description: "The number of processors to subtract when calculating parallelism."
+        required: false
+        type: number
+        default: 2
+
+    secrets:
+      CODECOV_TOKEN:
+        description: "The Codecov token to use for uploading coverage reports."
+        required: true
+
+jobs:
+  build:
+    uses: ./.github/workflows/reusable-build.yml
+    with:
+      build_dir: ${{ inputs.build_dir }}
+      build_type: ${{ inputs.build_type }}
+      cmake_args: ${{ inputs.cmake_args }}
+      cmake_target: ${{ inputs.cmake_target }}
+      runs_on: ${{ inputs.runs_on }}
+      image: ${{ inputs.image }}
+      config_name: ${{ inputs.config_name }}
+      nproc_subtract: ${{ inputs.nproc_subtract }}
+    secrets:
+      CODECOV_TOKEN: ${{ secrets.CODECOV_TOKEN }}
+
+  test:
+    needs: build
+    uses: ./.github/workflows/reusable-test.yml
+    with:
+      run_tests: ${{ !inputs.build_only }}
+      verify_voidstar: ${{ contains(inputs.cmake_args, '-Dvoidstar=ON') }}
+      runs_on: ${{ inputs.runs_on }}
+      image: ${{ inputs.image }}
+      config_name: ${{ inputs.config_name }}
+      nproc_subtract: ${{ inputs.nproc_subtract }}

.github/workflows/reusable-build-test.yml

@@ -0,0 +1,58 @@
+# This workflow builds and tests the binary for various configurations.
+name: Build and test
+
+# This workflow can only be triggered by other workflows. Note that the
+# workflow_call event does not support the 'choice' input type, see
+# https://docs.github.com/en/actions/reference/workflows-and-actions/workflow-syntax#onworkflow_callinputsinput_idtype,
+# so we use 'string' instead.
+on:
+  workflow_call:
+    inputs:
+      build_dir:
+        description: "The directory where to build."
+        required: false
+        type: string
+        default: ".build"
+      os:
+        description: 'The operating system to use for the build ("linux", "macos", "windows").'
+        required: true
+        type: string
+      strategy_matrix:
+        # TODO: Support additional strategies, e.g. "ubuntu" for generating all Ubuntu configurations.
+        description: 'The strategy matrix to use for generating the configurations ("minimal", "all").'
+        required: false
+        type: string
+        default: "minimal"
+    secrets:
+      CODECOV_TOKEN:
+        description: "The Codecov token to use for uploading coverage reports."
+        required: true
+
+jobs:
+  # Generate the strategy matrix to be used by the following job.
+  generate-matrix:
+    uses: ./.github/workflows/reusable-strategy-matrix.yml
+    with:
+      os: ${{ inputs.os }}
+      strategy_matrix: ${{ inputs.strategy_matrix }}
+
+  # Build and test the binary for each configuration.
+  build-test-config:
+    needs:
+      - generate-matrix
+    uses: ./.github/workflows/reusable-build-test-config.yml
+    strategy:
+      fail-fast: ${{ github.event_name == 'merge_group' }}
+      matrix: ${{ fromJson(needs.generate-matrix.outputs.matrix) }}
+      max-parallel: 10
+    with:
+      build_dir: ${{ inputs.build_dir }}
+      build_only: ${{ matrix.build_only }}
+      build_type: ${{ matrix.build_type }}
+      cmake_args: ${{ matrix.cmake_args }}
+      cmake_target: ${{ matrix.cmake_target }}
+      runs_on: ${{ toJSON(matrix.architecture.runner) }}
+      image: ${{ contains(matrix.architecture.platform, 'linux') && format('ghcr.io/xrplf/ci/{0}-{1}:{2}-{3}-sha-{4}', matrix.os.distro_name, matrix.os.distro_version, matrix.os.compiler_name, matrix.os.compiler_version, matrix.os.image_sha) || '' }}
+      config_name: ${{ matrix.config_name }}
+    secrets:
+      CODECOV_TOKEN: ${{ secrets.CODECOV_TOKEN }}

.github/workflows/reusable-build.yml

@@ -0,0 +1,154 @@
+name: Build rippled
+
+on:
+  workflow_call:
+    inputs:
+      build_dir:
+        description: "The directory where to build."
+        required: true
+        type: string
+      build_type:
+        description: 'The build type to use ("Debug", "Release").'
+        required: true
+        type: string
+      cmake_args:
+        description: "Additional arguments to pass to CMake."
+        required: true
+        type: string
+      cmake_target:
+        description: "The CMake target to build."
+        required: true
+        type: string
+
+      runs_on:
+        description: Runner to run the job on as a JSON string
+        required: true
+        type: string
+      image:
+        description: "The image to run in (leave empty to run natively)"
+        required: true
+        type: string
+
+      config_name:
+        description: "The name of the configuration."
+        required: true
+        type: string
+
+      nproc_subtract:
+        description: "The number of processors to subtract when calculating parallelism."
+        required: true
+        type: number
+
+    secrets:
+      CODECOV_TOKEN:
+        description: "The Codecov token to use for uploading coverage reports."
+        required: true
+
+defaults:
+  run:
+    shell: bash
+
+jobs:
+  build:
+    name: Build ${{ inputs.config_name }}
+    runs-on: ${{ fromJSON(inputs.runs_on) }}
+    container: ${{ inputs.image != '' && inputs.image || null }}
+    timeout-minutes: 60
+    steps:
+      - name: Cleanup workspace
+        if: ${{ runner.os == 'macOS' }}
+        uses: XRPLF/actions/.github/actions/cleanup-workspace@3f044c7478548e3c32ff68980eeb36ece02b364e
+
+      - name: Checkout repository
+        uses: actions/checkout@08eba0b27e820071cde6df949e0beb9ba4906955 # v4.3.0
+
+      - name: Prepare runner
+        uses: XRPLF/actions/.github/actions/prepare-runner@99685816bb60a95a66852f212f382580e180df3a
+        with:
+          disable_ccache: false
+
+      - name: Print build environment
+        uses: ./.github/actions/print-env
+
+      - name: Get number of processors
+        uses: XRPLF/actions/.github/actions/get-nproc@046b1620f6bfd6cd0985dc82c3df02786801fe0a
+        id: nproc
+        with:
+          subtract: ${{ inputs.nproc_subtract }}
+
+      - name: Setup Conan
+        uses: ./.github/actions/setup-conan
+
+      - name: Build dependencies
+        uses: ./.github/actions/build-deps
+        with:
+          build_dir: ${{ inputs.build_dir }}
+          build_nproc: ${{ steps.nproc.outputs.nproc }}
+          build_type: ${{ inputs.build_type }}
+          # Set the verbosity to "quiet" for Windows to avoid an excessive
+          # amount of logs. For other OSes, the "verbose" logs are more useful.
+          log_verbosity: ${{ runner.os == 'Windows' && 'quiet' || 'verbose' }}
+
+      - name: Configure CMake
+        shell: bash
+        working-directory: ${{ inputs.build_dir }}
+        env:
+          BUILD_TYPE: ${{ inputs.build_type }}
+          CMAKE_ARGS: ${{ inputs.cmake_args }}
+        run: |
+          cmake \
+            -G '${{ runner.os == 'Windows' && 'Visual Studio 17 2022' || 'Ninja' }}' \
+            -DCMAKE_TOOLCHAIN_FILE:FILEPATH=build/generators/conan_toolchain.cmake \
+            -DCMAKE_BUILD_TYPE="${BUILD_TYPE}" \
+            ${CMAKE_ARGS} \
+            ..
+
+      - name: Build the binary
+        shell: bash
+        working-directory: ${{ inputs.build_dir }}
+        env:
+          BUILD_NPROC: ${{ steps.nproc.outputs.nproc }}
+          BUILD_TYPE: ${{ inputs.build_type }}
+          CMAKE_TARGET: ${{ inputs.cmake_target }}
+        run: |
+          cmake \
+            --build . \
+            --config "${BUILD_TYPE}" \
+            --parallel ${BUILD_NPROC} \
+            --target "${CMAKE_TARGET}"
+
+      - name: Put built binaries in one location
+        shell: bash
+        working-directory: ${{ inputs.build_dir }}
+        env:
+          BUILD_TYPE_DIR: ${{ runner.os == 'Windows' && inputs.build_type || '' }}
+          CMAKE_TARGET: ${{ inputs.cmake_target }}
+        run: |
+          mkdir -p ./binaries/doctest/
+
+          cp ./${BUILD_TYPE_DIR}/rippled* ./binaries/
+          if [ "${CMAKE_TARGET}" != 'coverage' ]; then
+            cp ./src/tests/libxrpl/${BUILD_TYPE_DIR}/xrpl.test.* ./binaries/doctest/
+          fi
+
+      - name: Upload rippled artifact
+        uses: actions/upload-artifact@ea165f8d65b6e75b540449e92b4886f43607fa02 # v4.6.2
+        env:
+          BUILD_DIR: ${{ inputs.build_dir }}
+        with:
+          name: rippled-${{ inputs.config_name }}
+          path: ${{ env.BUILD_DIR }}/binaries/
+          retention-days: 3
+          if-no-files-found: error
+
+      - name: Upload coverage report
+        if: ${{ github.repository_owner == 'XRPLF' && inputs.cmake_target == 'coverage' }}
+        uses: codecov/codecov-action@18283e04ce6e62d37312384ff67231eb8fd56d24 # v5.4.3
+        with:
+          disable_search: true
+          disable_telem: true
+          fail_ci_if_error: true
+          files: ${{ inputs.build_dir }}/coverage.xml
+          plugins: noop
+          token: ${{ secrets.CODECOV_TOKEN }}
+          verbose: true

.github/workflows/reusable-check-levelization.yml

@@ -0,0 +1,46 @@
+# This workflow checks if the dependencies between the modules are correctly
+# indexed.
+name: Check levelization
+
+# This workflow can only be triggered by other workflows.
+on: workflow_call
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}-levelization
+  cancel-in-progress: true
+
+defaults:
+  run:
+    shell: bash
+
+jobs:
+  levelization:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@08eba0b27e820071cde6df949e0beb9ba4906955 # v4.3.0
+      - name: Check levelization
+        run: .github/scripts/levelization/generate.sh
+      - name: Check for differences
+        env:
+          MESSAGE: |
+
+            The dependency relationships between the modules in rippled have
+            changed, which may be an improvement or a regression.
+
+            A rule of thumb is that if your changes caused something to be
+            removed from loops.txt, it's probably an improvement, while if
+            something was added, it's probably a regression.
+
+            Run '.github/scripts/levelization/generate.sh' in your repo, commit
+            and push the changes. See .github/scripts/levelization/README.md for
+            more info.
+        run: |
+          DIFF=$(git status --porcelain)
+          if [ -n "${DIFF}" ]; then
+            # Print the differences to give the contributor a hint about what to
+            # expect when running levelization on their own machine.
+            git diff
+            echo "${MESSAGE}"
+            exit 1
+          fi

.github/workflows/reusable-check-missing-commits.yml

@@ -0,0 +1,62 @@
+# This workflow checks that all commits in the "master" branch are also in the
+# "release" and "develop" branches, and that all commits in the "release" branch
+# are also in the "develop" branch.
+name: Check for missing commits
+
+# This workflow can only be triggered by other workflows.
+on: workflow_call
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}-missing-commits
+  cancel-in-progress: true
+
+defaults:
+  run:
+    shell: bash
+
+jobs:
+  check:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@08eba0b27e820071cde6df949e0beb9ba4906955 # v4.3.0
+        with:
+          fetch-depth: 0
+      - name: Check for missing commits
+        env:
+          MESSAGE: |
+
+            If you are reading this, then the commits indicated above are missing
+            from the "develop" and/or "release" branch. Do a reverse-merge as soon
+            as possible. See CONTRIBUTING.md for instructions.
+        run: |
+          set -o pipefail
+          # Branches are ordered by how "canonical" they are. Every commit in one
+          # branch should be in all the branches behind it.
+          order=(master release develop)
+          branches=()
+          for branch in "${order[@]}"; do
+            # Check that the branches exist so that this job will work on forked
+            # repos, which don't necessarily have master and release branches.
+            echo "Checking if ${branch} exists."
+            if git ls-remote --exit-code --heads origin \
+              refs/heads/${branch} > /dev/null; then
+              branches+=(origin/${branch})
+            fi
+          done
+
+          prior=()
+          for branch in "${branches[@]}"; do
+            if [[ ${#prior[@]} -ne 0 ]]; then
+              echo "Checking ${prior[@]} for commits missing from ${branch}."
+              git log --oneline --no-merges "${prior[@]}" \
+                ^$branch | tee -a "missing-commits.txt"
+              echo
+            fi
+            prior+=("${branch}")
+          done
+
+          if [[ $(cat missing-commits.txt | wc -l) -ne 0 ]]; then
+            echo "${MESSAGE}"
+            exit 1
+          fi

.github/workflows/reusable-notify-clio.yml

@@ -0,0 +1,91 @@
+# This workflow exports the built libxrpl package to the Conan remote on a
+# a channel named after the pull request, and notifies the Clio repository about
+# the new version so it can check for compatibility.
+name: Notify Clio
+
+# This workflow can only be triggered by other workflows.
+on:
+  workflow_call:
+    inputs:
+      conan_remote_name:
+        description: "The name of the Conan remote to use."
+        required: false
+        type: string
+        default: xrplf
+      conan_remote_url:
+        description: "The URL of the Conan endpoint to use."
+        required: false
+        type: string
+        default: https://conan.ripplex.io
+    secrets:
+      clio_notify_token:
+        description: "The GitHub token to notify Clio about new versions."
+        required: true
+      conan_remote_username:
+        description: "The username for logging into the Conan remote."
+        required: true
+      conan_remote_password:
+        description: "The password for logging into the Conan remote."
+        required: true
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}-clio
+  cancel-in-progress: true
+
+defaults:
+  run:
+    shell: bash
+
+jobs:
+  upload:
+    if: ${{ github.event.pull_request.head.repo.full_name == github.repository }}
+    runs-on: ubuntu-latest
+    container: ghcr.io/xrplf/ci/ubuntu-noble:gcc-13-sha-5dd7158
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@08eba0b27e820071cde6df949e0beb9ba4906955 # v4.3.0
+      - name: Generate outputs
+        id: generate
+        env:
+          PR_NUMBER: ${{ github.event.pull_request.number }}
+        run: |
+          echo 'Generating user and channel.'
+          echo "user=clio" >> "${GITHUB_OUTPUT}"
+          echo "channel=pr_${PR_NUMBER}" >> "${GITHUB_OUTPUT}"
+          echo 'Extracting version.'
+          echo "version=$(cat src/libxrpl/protocol/BuildInfo.cpp | grep "versionString =" | awk -F '"' '{print $2}')" >> "${GITHUB_OUTPUT}"
+      - name: Calculate conan reference
+        id: conan_ref
+        run: |
+          echo "conan_ref=${{ steps.generate.outputs.version }}@${{ steps.generate.outputs.user }}/${{ steps.generate.outputs.channel }}" >> "${GITHUB_OUTPUT}"
+      - name: Set up Conan
+        uses: ./.github/actions/setup-conan
+        with:
+          conan_remote_name: ${{ inputs.conan_remote_name }}
+          conan_remote_url: ${{ inputs.conan_remote_url }}
+      - name: Log into Conan remote
+        env:
+          CONAN_REMOTE_NAME: ${{ inputs.conan_remote_name }}
+        run: conan remote login "${CONAN_REMOTE_NAME}" "${{ secrets.conan_remote_username }}" --password "${{ secrets.conan_remote_password }}"
+      - name: Upload package
+        env:
+          CONAN_REMOTE_NAME: ${{ inputs.conan_remote_name }}
+        run: |
+          conan export --user=${{ steps.generate.outputs.user }} --channel=${{ steps.generate.outputs.channel }} .
+          conan upload --confirm --check --remote="${CONAN_REMOTE_NAME}" xrpl/${{ steps.conan_ref.outputs.conan_ref }}
+    outputs:
+      conan_ref: ${{ steps.conan_ref.outputs.conan_ref }}
+
+  notify:
+    needs: upload
+    runs-on: ubuntu-latest
+    steps:
+      - name: Notify Clio
+        env:
+          GH_TOKEN: ${{ secrets.clio_notify_token }}
+          PR_URL: ${{ github.event.pull_request.html_url }}
+        run: |
+          gh api --method POST -H "Accept: application/vnd.github+json" -H "X-GitHub-Api-Version: 2022-11-28" \
+          /repos/xrplf/clio/dispatches -f "event_type=check_libxrpl" \
+          -F "client_payload[conan_ref]=${{ needs.upload.outputs.conan_ref }}" \
+          -F "client_payload[pr_url]=${PR_URL}"

.github/workflows/reusable-strategy-matrix.yml

@@ -0,0 +1,41 @@
+name: Generate strategy matrix
+
+on:
+  workflow_call:
+    inputs:
+      os:
+        description: 'The operating system to use for the build ("linux", "macos", "windows").'
+        required: false
+        type: string
+      strategy_matrix:
+        # TODO: Support additional strategies, e.g. "ubuntu" for generating all Ubuntu configurations.
+        description: 'The strategy matrix to use for generating the configurations ("minimal", "all").'
+        required: false
+        type: string
+        default: "minimal"
+    outputs:
+      matrix:
+        description: "The generated strategy matrix."
+        value: ${{ jobs.generate-matrix.outputs.matrix }}
+
+jobs:
+  generate-matrix:
+    runs-on: ubuntu-latest
+    outputs:
+      matrix: ${{ steps.generate.outputs.matrix }}
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@08eba0b27e820071cde6df949e0beb9ba4906955 # v4.3.0
+
+      - name: Set up Python
+        uses: actions/setup-python@a26af69be951a213d495a4c3e4e4022e16d87065 # v5.6.0
+        with:
+          python-version: 3.13
+
+      - name: Generate strategy matrix
+        working-directory: .github/scripts/strategy-matrix
+        id: generate
+        env:
+          GENERATE_CONFIG: ${{ inputs.os != '' && format('--config={0}.json', inputs.os) || '' }}
+          GENERATE_OPTION: ${{ inputs.strategy_matrix == 'all' && '--all' || '' }}
+        run: ./generate.py ${GENERATE_OPTION} ${GENERATE_CONFIG} >> "${GITHUB_OUTPUT}"

.github/workflows/reusable-test.yml

@@ -0,0 +1,111 @@
+name: Test rippled
+
+on:
+  workflow_call:
+    inputs:
+      verify_voidstar:
+        description: "Whether to verify the presence of voidstar instrumentation."
+        required: true
+        type: boolean
+      run_tests:
+        description: "Whether to run unit tests"
+        required: true
+        type: boolean
+
+      runs_on:
+        description: Runner to run the job on as a JSON string
+        required: true
+        type: string
+      image:
+        description: "The image to run in (leave empty to run natively)"
+        required: true
+        type: string
+
+      config_name:
+        description: "The name of the configuration."
+        required: true
+        type: string
+
+      nproc_subtract:
+        description: "The number of processors to subtract when calculating parallelism."
+        required: true
+        type: number
+
+jobs:
+  test:
+    name: Test ${{ inputs.config_name }}
+    runs-on: ${{ fromJSON(inputs.runs_on) }}
+    container: ${{ inputs.image != '' && inputs.image || null }}
+    timeout-minutes: 30
+    steps:
+      - name: Cleanup workspace
+        if: ${{ runner.os == 'macOS' }}
+        uses: XRPLF/actions/.github/actions/cleanup-workspace@3f044c7478548e3c32ff68980eeb36ece02b364e
+
+      - name: Get number of processors
+        uses: XRPLF/actions/.github/actions/get-nproc@046b1620f6bfd6cd0985dc82c3df02786801fe0a
+        id: nproc
+        with:
+          subtract: ${{ inputs.nproc_subtract }}
+
+      - name: Download rippled artifact
+        uses: actions/download-artifact@d3f86a106a0bac45b974a628896c90dbdf5c8093 # v4.3.0
+        with:
+          name: rippled-${{ inputs.config_name }}
+
+      - name: Make binary executable (Linux and macOS)
+        shell: bash
+        if: ${{ runner.os == 'Linux' || runner.os == 'macOS' }}
+        run: |
+          chmod +x ./rippled
+
+      - name: Check linking (Linux)
+        if: ${{ runner.os == 'Linux' }}
+        shell: bash
+        run: |
+          ldd ./rippled
+          if [ "$(ldd ./rippled | grep -E '(libstdc\+\+|libgcc)' | wc -l)" -eq 0 ]; then
+            echo 'The binary is statically linked.'
+          else
+            echo 'The binary is dynamically linked.'
+            exit 1
+          fi
+
+      - name: Verifying presence of instrumentation
+        if: ${{ inputs.verify_voidstar }}
+        shell: bash
+        run: |
+          ./rippled --version | grep libvoidstar
+
+      - name: Run the embedded tests
+        if: ${{ inputs.run_tests }}
+        shell: bash
+        env:
+          BUILD_NPROC: ${{ steps.nproc.outputs.nproc }}
+        run: |
+          ./rippled --unittest --unittest-jobs ${BUILD_NPROC}
+
+      - name: Run the separate tests
+        if: ${{ inputs.run_tests }}
+        env:
+          EXT: ${{ runner.os == 'Windows' && '.exe' || '' }}
+        shell: bash
+        run: |
+          for test_file in ./doctest/*${EXT}; do
+            echo "Executing $test_file"
+            chmod +x "$test_file"
+            if [[ "${{ runner.os }}" == "Windows" && "$test_file" == "./doctest/xrpl.test.net.exe" ]]; then
+              echo "Skipping $test_file on Windows"
+            else
+              "$test_file"
+            fi
+          done
+
+      - name: Debug failure (Linux)
+        if: ${{ failure() && runner.os == 'Linux' && inputs.run_tests }}
+        shell: bash
+        run: |
+          echo "IPv4 local port range:"
+          cat /proc/sys/net/ipv4/ip_local_port_range
+          echo "Netstat:"
+          netstat -an

.github/workflows/upload-conan-deps.yml

@@ -0,0 +1,107 @@
+name: Upload Conan Dependencies
+
+on:
+  schedule:
+    - cron: "0 3 * * 2-6"
+  workflow_dispatch:
+    inputs:
+      force_source_build:
+        description: "Force source build of all dependencies"
+        required: false
+        default: false
+        type: boolean
+      force_upload:
+        description: "Force upload of all dependencies"
+        required: false
+        default: false
+        type: boolean
+  pull_request:
+    branches: [develop]
+    paths:
+      # This allows testing changes to the upload workflow in a PR
+      - .github/workflows/upload-conan-deps.yml
+  push:
+    branches: [develop]
+    paths:
+      - .github/workflows/upload-conan-deps.yml
+      - .github/workflows/reusable-strategy-matrix.yml
+      - .github/actions/build-deps/action.yml
+      - .github/actions/setup-conan/action.yml
+      - ".github/scripts/strategy-matrix/**"
+      - conanfile.py
+      - conan.lock
+
+env:
+  CONAN_REMOTE_NAME: xrplf
+  CONAN_REMOTE_URL: https://conan.ripplex.io
+  NPROC_SUBTRACT: 2
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+jobs:
+  # Generate the strategy matrix to be used by the following job.
+  generate-matrix:
+    uses: ./.github/workflows/reusable-strategy-matrix.yml
+    with:
+      strategy_matrix: ${{ github.event_name == 'pull_request' && 'minimal' || 'all' }}
+
+  # Build and upload the dependencies for each configuration.
+  run-upload-conan-deps:
+    needs:
+      - generate-matrix
+    strategy:
+      fail-fast: false
+      matrix: ${{ fromJson(needs.generate-matrix.outputs.matrix) }}
+      max-parallel: 10
+    runs-on: ${{ matrix.architecture.runner }}
+    container: ${{ contains(matrix.architecture.platform, 'linux') && format('ghcr.io/xrplf/ci/{0}-{1}:{2}-{3}-sha-{4}', matrix.os.distro_name, matrix.os.distro_version, matrix.os.compiler_name, matrix.os.compiler_version, matrix.os.image_sha) || null }}
+    steps:
+      - name: Cleanup workspace
+        if: ${{ runner.os == 'macOS' }}
+        uses: XRPLF/actions/.github/actions/cleanup-workspace@3f044c7478548e3c32ff68980eeb36ece02b364e
+
+      - name: Checkout repository
+        uses: actions/checkout@08eba0b27e820071cde6df949e0beb9ba4906955 # v4.3.0
+
+      - name: Prepare runner
+        uses: XRPLF/actions/.github/actions/prepare-runner@99685816bb60a95a66852f212f382580e180df3a
+        with:
+          disable_ccache: false
+
+      - name: Print build environment
+        uses: ./.github/actions/print-env
+
+      - name: Get number of processors
+        uses: XRPLF/actions/.github/actions/get-nproc@046b1620f6bfd6cd0985dc82c3df02786801fe0a
+        id: nproc
+        with:
+          subtract: ${{ env.NPROC_SUBTRACT }}
+
+      - name: Setup Conan
+        uses: ./.github/actions/setup-conan
+        with:
+          conan_remote_name: ${{ env.CONAN_REMOTE_NAME }}
+          conan_remote_url: ${{ env.CONAN_REMOTE_URL }}
+
+      - name: Build dependencies
+        uses: ./.github/actions/build-deps
+        with:
+          build_dir: .build
+          build_nproc: ${{ steps.nproc.outputs.nproc }}
+          build_type: ${{ matrix.build_type }}
+          force_build: ${{ github.event_name == 'schedule' || github.event.inputs.force_source_build == 'true' }}
+          # Set the verbosity to "quiet" for Windows to avoid an excessive
+          # amount of logs. For other OSes, the "verbose" logs are more useful.
+          log_verbosity: ${{ runner.os == 'Windows' && 'quiet' || 'verbose' }}
+
+      - name: Log into Conan remote
+        if: ${{ github.repository_owner == 'XRPLF' && (github.event_name == 'push' || github.event_name == 'workflow_dispatch') }}
+        run: conan remote login "${CONAN_REMOTE_NAME}" "${{ secrets.CONAN_REMOTE_USERNAME }}" --password "${{ secrets.CONAN_REMOTE_PASSWORD }}"
+
+      - name: Upload Conan packages
+        if: ${{ github.repository_owner == 'XRPLF' && (github.event_name == 'push' || github.event_name == 'workflow_dispatch') }}
+        env:
+          FORCE_OPTION: ${{ github.event.inputs.force_upload == 'true' && '--force' || '' }}
+        run: conan upload "*" --remote="${CONAN_REMOTE_NAME}" --confirm ${FORCE_OPTION}

.github/workflows/windows.yml

@@ -1,100 +0,0 @@
-name: windows
-
-on: [push, pull_request]
-
-# https://docs.github.com/en/actions/using-jobs/using-concurrency
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-
-jobs:
-
-  test:
-    strategy:
-      fail-fast: false
-      matrix:
-        generator:
-          - Visual Studio 16 2019
-        configuration:
-          - Release
-          # Github hosted runners tend to hang when running Debug unit tests.
-          # Instead of trying to work around it, disable the Debug job until
-          # something beefier (i.e. a heavy self-hosted runner) becomes
-          # available.
-          # - Debug
-    runs-on: windows-2019
-    env:
-      build_dir: .build
-    steps:
-      - name: checkout
-        uses: actions/checkout@v3
-      - name: choose Python
-        uses: actions/setup-python@v3
-        with:
-          python-version: 3.9
-      - name: learn Python cache directory
-        id: pip-cache
-        shell: bash
-        run: |
-          python -m pip install --upgrade pip
-          echo "dir=$(pip cache dir)" | tee ${GITHUB_OUTPUT}
-      - name: restore Python cache directory
-        uses: actions/cache@v3
-        with:
-            path: ${{ steps.pip-cache.outputs.dir }}
-            key: ${{ runner.os }}-${{ hashFiles('.github/workflows/windows.yml') }}
-      - name: install Conan
-        run: pip install wheel 'conan<2'
-      - name: check environment
-        run: |
-          $env:PATH -split ';'
-          python --version
-          conan --version
-          cmake --version
-          dir env:
-      - name: configure Conan
-        shell: bash
-        env:
-          CONAN_URL: http://18.143.149.228:8081/artifactory/api/conan/conan-non-prod
-        run: |
-          conan profile new default --detect
-          conan profile update settings.compiler.runtime=MT${{ matrix.configuration == 'Debug' && 'd' || '' }} default
-          # Do not quote the URL. An empty string will be accepted (with
-          # a non-fatal warning), but a missing argument will not.
-          conan remote add ripple ${{ env.CONAN_URL }} --insert 0
-      - name: try to authenticate to ripple Conan remote
-        shell: bash
-        id: remote
-        run: |
-          echo outcome=$(conan user --remote ripple ${{ secrets.CONAN_USERNAME }} \
-            --password ${{ secrets.CONAN_TOKEN }} >&2 && echo success || \
-            echo failure) | tee ${GITHUB_OUTPUT}
-      - name: list missing binaries
-        id: binaries
-        shell: bash
-        # Print the list of dependencies that would need to be built locally.
-        # A non-empty list means we have "failed" to cache binaries remotely.
-        run: |
-          echo missing=$(conan info . --build missing --settings build_type=${{ matrix.configuration }} --json 2>/dev/null  | grep '^\[') | tee ${GITHUB_OUTPUT}
-      - name: build dependencies
-        uses: ./.github/actions/dependencies
-        with:
-          configuration: ${{ matrix.configuration }}
-      - name: upload dependencies to remote
-        if: (steps.binaries.outputs.missing != '[]') && (steps.remote.outputs.outcome == 'success')
-        run: conan upload --remote ripple '*' --all --parallel --confirm
-      - name: build
-        uses: ./.github/actions/build
-        with:
-          generator: '${{ matrix.generator }}'
-          configuration: ${{ matrix.configuration }}
-          # Hard code for now. Move to the matrix if varied options are needed
-          cmake-args: '-Dassert=ON -Dreporting=OFF -Dunity=ON'
-      - name: test (permitted to silently fail)
-        shell: bash
-        # Github runners are resource limited, which causes unit tests to fail
-        # (e.g. OOM). To allow forward progress until self-hosted runners are
-        # up and running reliably, allow the job to succeed even if tests fail.
-        continue-on-error: true
-        run: |
-          ${build_dir}/${{ matrix.configuration }}/rippled --unittest --unittest-jobs $(nproc)

.gitignore

@@ -37,10 +37,9 @@ Release/*.*
 *.gcov
 
 # Levelization checking
-Builds/levelization/results/rawincludes.txt
-Builds/levelization/results/paths.txt
-Builds/levelization/results/includes/
-Builds/levelization/results/includedby/
+.github/scripts/levelization/results/*
+!.github/scripts/levelization/results/loops.txt
+!.github/scripts/levelization/results/ordering.txt
 
 # Ignore tmp directory.
 tmp
@@ -111,4 +110,4 @@ bld.rippled/
 .vscode
 
 # Suggested in-tree build directory
-/.build/
+/.build*/

.pre-commit-config.yaml

@@ -1,6 +1,39 @@
-# .pre-commit-config.yaml
+# To run pre-commit hooks, first install pre-commit:
+# - `pip install pre-commit==${PRE_COMMIT_VERSION}`
+#
+# Then, run the following command to install the git hook scripts:
+# - `pre-commit install`
+# You can run all configured hooks against all files with:
+# - `pre-commit run --all-files`
+# To manually run a specific hook, use:
+# - `pre-commit run <hook_id> --all-files`
+# To run the hooks against only the staged files, use:
+# - `pre-commit run`
 repos:
-- repo: https://github.com/pre-commit/mirrors-clang-format
-  rev: v10.0.1
-  hooks:
-  - id: clang-format
+  - repo: https://github.com/pre-commit/pre-commit-hooks
+    rev: 3e8a8703264a2f4a69428a0aa4dcb512790b2c8c # frozen: v6.0.0
+    hooks:
+      - id: trailing-whitespace
+      - id: end-of-file-fixer
+      - id: mixed-line-ending
+      - id: check-merge-conflict
+        args: [--assume-in-merge]
+
+  - repo: https://github.com/pre-commit/mirrors-clang-format
+    rev: 7d85583be209cb547946c82fbe51f4bc5dd1d017 # frozen: v18.1.8
+    hooks:
+      - id: clang-format
+        args: [--style=file]
+        "types_or": [c++, c, proto]
+
+  - repo: https://github.com/rbubley/mirrors-prettier
+    rev: 5ba47274f9b181bce26a5150a725577f3c336011 # frozen: v3.6.2
+    hooks:
+      - id: prettier
+
+exclude: |
+  (?x)^(
+      external/.*|
+      .github/scripts/levelization/results/.*\.txt|
+      conan\.lock
+  )$

.prettierignore

@@ -0,0 +1 @@
+external

API-CHANGELOG.md

@@ -8,42 +8,138 @@ The API version controls the API behavior you see. This includes what properties
 
 For a log of breaking changes, see the **API Version [number]** headings. In general, breaking changes are associated with a particular API Version number. For non-breaking changes, scroll to the **XRP Ledger version [x.y.z]** headings. Non-breaking changes are associated with a particular XRP Ledger (`rippled`) release.
 
+## API Version 2
+
+API version 2 is available in `rippled` version 2.0.0 and later. To use this API, clients specify `"api_version" : 2` in each request.
+
+#### Removed methods
+
+In API version 2, the following deprecated methods are no longer available: (https://github.com/XRPLF/rippled/pull/4759)
+
+- `tx_history` - Instead, use other methods such as `account_tx` or `ledger` with the `transactions` field set to `true`.
+- `ledger_header` - Instead, use the `ledger` method.
+
+#### Modifications to JSON transaction element in V2
+
+In API version 2, JSON elements for transaction output have been changed and made consistent for all methods which output transactions. (https://github.com/XRPLF/rippled/pull/4775)
+This helps to unify the JSON serialization format of transactions. (https://github.com/XRPLF/clio/issues/722, https://github.com/XRPLF/rippled/issues/4727)
+
+- JSON transaction element is named `tx_json`
+- Binary transaction element is named `tx_blob`
+- JSON transaction metadata element is named `meta`
+- Binary transaction metadata element is named `meta_blob`
+
+Additionally, these elements are now consistently available next to `tx_json` (i.e. sibling elements), where possible:
+
+- `hash` - Transaction ID. This data was stored inside transaction output in API version 1, but in API version 2 is a sibling element.
+- `ledger_index` - Ledger index (only set on validated ledgers)
+- `ledger_hash` - Ledger hash (only set on closed or validated ledgers)
+- `close_time_iso` - Ledger close time expressed in ISO 8601 time format (only set on validated ledgers)
+- `validated` - Bool element set to `true` if the transaction is in a validated ledger, otherwise `false`
+
+This change affects the following methods:
+
+- `tx` - Transaction data moved into element `tx_json` (was inline inside `result`) or, if binary output was requested, moved from `tx` to `tx_blob`. Renamed binary transaction metadata element (if it was requested) from `meta` to `meta_blob`. Changed location of `hash` and added new elements
+- `account_tx` - Renamed transaction element from `tx` to `tx_json`. Renamed binary transaction metadata element (if it was requested) from `meta` to `meta_blob`. Changed location of `hash` and added new elements
+- `transaction_entry` - Renamed transaction metadata element from `metadata` to `meta`. Changed location of `hash` and added new elements
+- `subscribe` - Renamed transaction element from `transaction` to `tx_json`. Changed location of `hash` and added new elements
+- `sign`, `sign_for`, `submit` and `submit_multisigned` - Changed location of `hash` element.
+
+#### Modification to `Payment` transaction JSON schema
+
+When reading Payments, the `Amount` field should generally **not** be used. Instead, use [delivered_amount](https://xrpl.org/partial-payments.html#the-delivered_amount-field) to see the amount that the Payment delivered. To clarify its meaning, the `Amount` field is being renamed to `DeliverMax`. (https://github.com/XRPLF/rippled/pull/4733)
+
+- In `Payment` transaction type, JSON RPC field `Amount` is renamed to `DeliverMax`. To enable smooth client transition, `Amount` is still handled, as described below: (https://github.com/XRPLF/rippled/pull/4733)
+  - On JSON RPC input (e.g. `submit_multisigned` etc. methods), `Amount` is recognized as an alias to `DeliverMax` for both API version 1 and version 2 clients.
+  - On JSON RPC input, submitting both `Amount` and `DeliverMax` fields is allowed _only_ if they are identical; otherwise such input is rejected with `rpcINVALID_PARAMS` error.
+  - On JSON RPC output (e.g. `subscribe`, `account_tx` etc. methods), `DeliverMax` is present in both API version 1 and version 2.
+  - On JSON RPC output, `Amount` is only present in API version 1 and _not_ in version 2.
+
+#### Modifications to account_info response
+
+- `signer_lists` is returned in the root of the response. (In API version 1, it was nested under `account_data`.) (https://github.com/XRPLF/rippled/pull/3770)
+- When using an invalid `signer_lists` value, the API now returns an "invalidParams" error. (https://github.com/XRPLF/rippled/pull/4585)
+  - (`signer_lists` must be a boolean. In API version 1, strings were accepted and may return a normal response - i.e. as if `signer_lists` were `true`.)
+
+#### Modifications to [account_tx](https://xrpl.org/account_tx.html#account_tx) response
+
+- Using `ledger_index_min`, `ledger_index_max`, and `ledger_index` returns `invalidParams` because if you use `ledger_index_min` or `ledger_index_max`, then it does not make sense to also specify `ledger_index`. In API version 1, no error was returned. (https://github.com/XRPLF/rippled/pull/4571)
+  - The same applies for `ledger_index_min`, `ledger_index_max`, and `ledger_hash`. (https://github.com/XRPLF/rippled/issues/4545#issuecomment-1565065579)
+- Using a `ledger_index_min` or `ledger_index_max` beyond the range of ledgers that the server has:
+  - returns `lgrIdxMalformed` in API version 2. Previously, in API version 1, no error was returned. (https://github.com/XRPLF/rippled/issues/4288)
+- Attempting to use a non-boolean value (such as a string) for the `binary` or `forward` parameters returns `invalidParams` (`rpcINVALID_PARAMS`). Previously, in API version 1, no error was returned. (https://github.com/XRPLF/rippled/pull/4620)
+
+#### Modifications to [noripple_check](https://xrpl.org/noripple_check.html#noripple_check) response
+
+- Attempting to use a non-boolean value (such as a string) for the `transactions` parameter returns `invalidParams` (`rpcINVALID_PARAMS`). Previously, in API version 1, no error was returned. (https://github.com/XRPLF/rippled/pull/4620)
+
 ## API Version 1
 
-This version is supported by all `rippled` versions. At time of writing, it is the default API version, used when no `api_version` is specified. When a new API version is introduced, the command line interface will default to the latest API version. The command line is intended for ad-hoc usage by humans, not programs or automated scripts. The command line is not meant for use in production code.
+This version is supported by all `rippled` versions. For WebSocket and HTTP JSON-RPC requests, it is currently the default API version used when no `api_version` is specified.
 
-### Idiosyncrasies
+The [commandline](https://xrpl.org/docs/references/http-websocket-apis/api-conventions/request-formatting/#commandline-format) always uses the latest API version. The command line is intended for ad-hoc usage by humans, not programs or automated scripts. The command line is not meant for use in production code.
 
-#### V1 account_info response
+### Inconsistency: server_info - network_id
 
-In [the response to the `account_info` command](https://xrpl.org/account_info.html#response-format), there is `account_data` - which is supposed to be an `AccountRoot` object - and `signer_lists` is returned in this object. However, the docs say that `signer_lists` should be at the root level of the reponse.
+The `network_id` field was added in the `server_info` response in version 1.5.0 (2019), but it is not returned in [reporting mode](https://xrpl.org/rippled-server-modes.html#reporting-mode). However, use of reporting mode is now discouraged, in favor of using [Clio](https://github.com/XRPLF/clio) instead.
 
-It makes sense for `signer_lists` to be at the root level because signer lists are not part of the AccountRoot object. (First reported in [xrpl-dev-portal#938](https://github.com/XRPLF/xrpl-dev-portal/issues/938).)
+## XRP Ledger server version 2.5.0
 
-In `api_version: 2`, the `signer_lists` field [will be moved](#modifications-to-account_info-response-in-v2) to the root level of the account_info response. (https://github.com/XRPLF/rippled/pull/3770)
+As of 2025-04-04, version 2.5.0 is in development. You can use a pre-release version by building from source or [using the `nightly` package](https://xrpl.org/docs/infrastructure/installation/install-rippled-on-ubuntu).
 
-#### server_info - network_id
+### Additions and bugfixes in 2.5.0
 
-The `network_id` field was added in the `server_info` response in version 1.5.0 (2019), but it is not returned in [reporting mode](https://xrpl.org/rippled-server-modes.html#reporting-mode).
+- `channel_authorize`: If `signing_support` is not enabled in the config, the RPC is disabled.
+
+## XRP Ledger server version 2.4.0
+
+[Version 2.4.0](https://github.com/XRPLF/rippled/releases/tag/2.4.0) was released on March 4, 2025.
+
+### Additions and bugfixes in 2.4.0
+
+- `ledger_entry`: `state` is added an alias for `ripple_state`.
+- `ledger_entry`: Enables case-insensitive filtering by canonical name in addition to case-sensitive filtering by RPC name.
+- `validators`: Added new field `validator_list_threshold` in response.
+- `simulate`: A new RPC that executes a [dry run of a transaction submission](https://github.com/XRPLF/XRPL-Standards/tree/master/XLS-0069d-simulate#2-rpc-simulate)
+- Signing methods autofill fees better and properly handle transactions that don't have a base fee, and will also autofill the `NetworkID` field.
+
+## XRP Ledger server version 2.3.0
+
+[Version 2.3.0](https://github.com/XRPLF/rippled/releases/tag/2.3.0) was released on Nov 25, 2024.
+
+### Breaking changes in 2.3.0
+
+- `book_changes`: If the requested ledger version is not available on this node, a `ledgerNotFound` error is returned and the node does not attempt to acquire the ledger from the p2p network (as with other non-admin RPCs).
+
+Admins can still attempt to retrieve old ledgers with the `ledger_request` RPC.
+
+### Additions and bugfixes in 2.3.0
+
+- `book_changes`: Returns a `validated` field in its response, which was missing in prior versions.
+
+## XRP Ledger server version 2.2.0
+
+[Version 2.2.0](https://github.com/XRPLF/rippled/releases/tag/2.2.0) was released on Jun 5, 2024. The following additions are non-breaking (because they are purely additive):
+
+- The `feature` method now has a non-admin mode for users. (It was previously only available to admin connections.) The method returns an updated list of amendments, including their names and other information. ([#4781](https://github.com/XRPLF/rippled/pull/4781))
 
 ## XRP Ledger server version 2.0.0
 
-### Additions in 2.0
-
-Additions are intended to be non-breaking (because they are purely additive).
+[Version 2.0.0](https://github.com/XRPLF/rippled/releases/tag/2.0.0) was released on Jan 9, 2024. The following additions are non-breaking (because they are purely additive):
 
 - `server_definitions`: A new RPC that generates a `definitions.json`-like output that can be used in XRPL libraries.
 - In `Payment` transactions, `DeliverMax` has been added. This is a replacement for the `Amount` field, which should not be used. Typically, the `delivered_amount` (in transaction metadata) should be used. To ease the transition, `DeliverMax` is present regardless of API version, since adding a field is non-breaking.
 - API version 2 has been moved from beta to supported, meaning that it is generally available (regardless of the `beta_rpc_api` setting).
 
+## XRP Ledger server version 2.2.0
+
+The following is a non-breaking addition to the API.
+
+- The `feature` method now has a non-admin mode for users. (It was previously only available to admin connections.) The method returns an updated list of amendments, including their names and other information. ([#4781](https://github.com/XRPLF/rippled/pull/4781))
 
 ## XRP Ledger server version 1.12.0
 
-[Version 1.12.0](https://github.com/XRPLF/rippled/releases/tag/1.12.0) was released on Sep 6, 2023.
-
-### Additions in 1.12
-
-Additions are intended to be non-breaking (because they are purely additive).
+[Version 1.12.0](https://github.com/XRPLF/rippled/releases/tag/1.12.0) was released on Sep 6, 2023. The following additions are non-breaking (because they are purely additive).
 
 - `server_info`: Added `ports`, an array which advertises the RPC and WebSocket ports. This information is also included in the `/crawl` endpoint (which calls `server_info` internally). `grpc` and `peer` ports are also included. (https://github.com/XRPLF/rippled/pull/4427)
   - `ports` contains objects, each containing a `port` for the listening port (a number string), and a `protocol` array listing the supported protocols on that port.
@@ -120,71 +216,6 @@ was released on Mar 14, 2023.
   removed from the [ledger subscription stream](https://xrpl.org/subscribe.html#ledger-stream), because it will no longer
   have any meaning.
 
-## API Version 2
-
-API version 2 is introduced in `rippled` version 2.0. Users can request it explicitly by specifying `"api_version" : 2`.
-
-#### Removed methods
-
-In API version 2, the following deprecated methods are no longer available: (https://github.com/XRPLF/rippled/pull/4759)
-
-- `tx_history` - Instead, use other methods such as `account_tx` or `ledger` with the `transactions` field set to `true`.
-- `ledger_header` - Instead, use the `ledger` method.
-
-#### Modifications to JSON transaction element in V2
-
-In API version 2, JSON elements for transaction output have been changed and made consistent for all methods which output transactions. (https://github.com/XRPLF/rippled/pull/4775)
-This helps to unify the JSON serialization format of transactions. (https://github.com/XRPLF/clio/issues/722, https://github.com/XRPLF/rippled/issues/4727)
-
-- JSON transaction element is named `tx_json`
-- Binary transaction element is named `tx_blob`
-- JSON transaction metadata element is named `meta`
-- Binary transaction metadata element is named `meta_blob`
-
-Additionally, these elements are now consistently available next to `tx_json` (i.e. sibling elements), where possible:
-
-- `hash` - Transaction ID. This data was stored inside transaction output in API version 1, but in API version 2 is a sibling element.
-- `ledger_index` - Ledger index (only set on validated ledgers)
-- `ledger_hash` - Ledger hash (only set on closed or validated ledgers)
-- `close_time_iso` - Ledger close time expressed in ISO 8601 time format (only set on validated ledgers)
-- `validated` - Bool element set to `true` if the transaction is in a validated ledger, otherwise `false`
-
-This change affects the following methods:
-
-- `tx` - Transaction data moved into element `tx_json` (was inline inside `result`) or, if binary output was requested, moved from `tx` to `tx_blob`. Renamed binary transaction metadata element (if it was requested) from `meta` to `meta_blob`. Changed location of `hash` and added new elements
-- `account_tx` - Renamed transaction element from `tx` to `tx_json`. Renamed binary transaction metadata element (if it was requested) from `meta` to `meta_blob`. Changed location of `hash` and added new elements
-- `transaction_entry` - Renamed transaction metadata element from `metadata` to `meta`. Changed location of `hash` and added new elements
-- `subscribe` - Renamed transaction element from `transaction` to `tx_json`. Changed location of `hash` and added new elements
-- `sign`, `sign_for`, `submit` and `submit_multisigned` - Changed location of `hash` element.
-
-#### Modification to `Payment` transaction JSON schema
-
-When reading Payments, the `Amount` field should generally **not** be used. Instead, use [delivered_amount](https://xrpl.org/partial-payments.html#the-delivered_amount-field) to see the amount that the Payment delivered. To clarify its meaning, the `Amount` field is being renamed to `DeliverMax`. (https://github.com/XRPLF/rippled/pull/4733)
-
-- In `Payment` transaction type, JSON RPC field `Amount` is renamed to `DeliverMax`. To enable smooth client transition, `Amount` is still handled, as described below: (https://github.com/XRPLF/rippled/pull/4733)
-  - On JSON RPC input (e.g. `submit_multisigned` etc. methods), `Amount` is recognized as an alias to `DeliverMax` for both API version 1 and version 2 clients.
-  - On JSON RPC input, submitting both `Amount` and `DeliverMax` fields is allowed _only_ if they are identical; otherwise such input is rejected with `rpcINVALID_PARAMS` error.
-  - On JSON RPC output (e.g. `subscribe`, `account_tx` etc. methods), `DeliverMax` is present in both API version 1 and version 2.
-  - On JSON RPC output, `Amount` is only present in API version 1 and _not_ in version 2.
-
-#### Modifications to account_info response
-
-- `signer_lists` is returned in the root of the response. In API version 1, it was nested under `account_data`. (https://github.com/XRPLF/rippled/pull/3770)
-- When using an invalid `signer_lists` value, the API now returns an "invalidParams" error. (https://github.com/XRPLF/rippled/pull/4585)
-  - (`signer_lists` must be a boolean. In API version 1, strings were accepted and may return a normal response - i.e. as if `signer_lists` were `true`.)
-
-#### Modifications to [account_tx](https://xrpl.org/account_tx.html#account_tx) response
-
-- Using `ledger_index_min`, `ledger_index_max`, and `ledger_index` returns `invalidParams` because if you use `ledger_index_min` or `ledger_index_max`, then it does not make sense to also specify `ledger_index`. In API version 1, no error was returned. (https://github.com/XRPLF/rippled/pull/4571)
-  - The same applies for `ledger_index_min`, `ledger_index_max`, and `ledger_hash`. (https://github.com/XRPLF/rippled/issues/4545#issuecomment-1565065579)
-- Using a `ledger_index_min` or `ledger_index_max` beyond the range of ledgers that the server has:
-  - returns `lgrIdxMalformed` in API version 2. Previously, in API version 1, no error was returned. (https://github.com/XRPLF/rippled/issues/4288)
-- Attempting to use a non-boolean value (such as a string) for the `binary` or `forward` parameters returns `invalidParams` (`rpcINVALID_PARAMS`). Previously, in API version 1, no error was returned. (https://github.com/XRPLF/rippled/pull/4620)
-
-#### Modifications to [noripple_check](https://xrpl.org/noripple_check.html#noripple_check) response
-
-- Attempting to use a non-boolean value (such as a string) for the `transactions` parameter returns `invalidParams` (`rpcINVALID_PARAMS`). Previously, in API version 1, no error was returned. (https://github.com/XRPLF/rippled/pull/4620)
-
 # Unit tests for API changes
 
 The following information is useful to developers contributing to this project:

BUILD.md

@@ -3,29 +3,29 @@
 | These instructions assume you have a C++ development environment ready with Git, Python, Conan, CMake, and a C++ compiler. For help setting one up on Linux, macOS, or Windows, [see this guide](./docs/build/environment.md). |
 
 > These instructions also assume a basic familiarity with Conan and CMake.
-> If you are unfamiliar with Conan,
-> you can read our [crash course](./docs/build/conan.md)
-> or the official [Getting Started][3] walkthrough.
+> If you are unfamiliar with Conan, you can read our
+> [crash course](./docs/build/conan.md) or the official [Getting Started][3]
+> walkthrough.
 
 ## Branches
 
 For a stable release, choose the `master` branch or one of the [tagged
 releases](https://github.com/ripple/rippled/releases).
 
-```
+```bash
 git checkout master
 ```
 
 For the latest release candidate, choose the `release` branch.
 
-```
+```bash
 git checkout release
 ```
 
 For the latest set of untested features, or to contribute, choose the `develop`
 branch.
 
-```
+```bash
 git checkout develop
 ```
 
@@ -33,126 +33,307 @@ git checkout develop
 
 See [System Requirements](https://xrpl.org/system-requirements.html).
 
-Building rippled generally requires git, Python, Conan, CMake, and a C++ compiler. Some guidance on setting up such a [C++ development environment can be found here](./docs/build/environment.md).
+Building rippled generally requires git, Python, Conan, CMake, and a C++
+compiler. Some guidance on setting up such a [C++ development environment can be
+found here](./docs/build/environment.md).
 
-- [Python 3.7](https://www.python.org/downloads/)
-- [Conan 1.55](https://conan.io/downloads.html)
-- [CMake 3.16](https://cmake.org/download/)
+- [Python 3.11](https://www.python.org/downloads/), or higher
+- [Conan 2.17](https://conan.io/downloads.html)[^1], or higher
+- [CMake 3.22](https://cmake.org/download/), or higher
+
+[^1]:
+    It is possible to build with Conan 1.60+, but the instructions are
+    significantly different, which is why we are not recommending it.
 
 `rippled` is written in the C++20 dialect and includes the `<concepts>` header.
 The [minimum compiler versions][2] required are:
 
-| Compiler    | Version |
-|-------------|---------|
-| GCC         | 11      |
-| Clang       | 13      |
-| Apple Clang | 13.1.6  |
-| MSVC        | 19.23   |
+| Compiler    | Version   |
+| ----------- | --------- |
+| GCC         | 12        |
+| Clang       | 16        |
+| Apple Clang | 16        |
+| MSVC        | 19.44[^3] |
 
 ### Linux
 
-The Ubuntu operating system has received the highest level of
-quality assurance, testing, and support.
+The Ubuntu Linux distribution has received the highest level of quality
+assurance, testing, and support. We also support Red Hat and use Debian
+internally.
 
-Here are [sample instructions for setting up a C++ development environment on Linux](./docs/build/environment.md#linux).
+Here are [sample instructions for setting up a C++ development environment on
+Linux](./docs/build/environment.md#linux).
 
 ### Mac
 
 Many rippled engineers use macOS for development.
 
-Here are [sample instructions for setting up a C++ development environment on macOS](./docs/build/environment.md#macos).
+Here are [sample instructions for setting up a C++ development environment on
+macOS](./docs/build/environment.md#macos).
 
 ### Windows
 
-Windows is not recommended for production use at this time.
+Windows is used by some engineers for development only.
 
-- Additionally, 32-bit Windows development is not supported.
-- Visual Studio 2022 is not yet supported.
-  - rippled generally requires [Boost][] 1.77, which Conan cannot build with VS 2022.
-  - Until rippled is updated for compatibility with later versions of Boost, Windows developers may need to use Visual Studio 2019.
-
-[Boost]: https://www.boost.org/
+[^3]: Windows is not recommended for production use.
 
 ## Steps
 
 ### Set Up Conan
 
-After you have a [C++ development environment](./docs/build/environment.md) ready with Git, Python, Conan, CMake, and a C++ compiler, you may need to set up your Conan profile.
+After you have a [C++ development environment](./docs/build/environment.md) ready with Git, Python,
+Conan, CMake, and a C++ compiler, you may need to set up your Conan profile.
 
-These instructions assume a basic familiarity with Conan and CMake.
+These instructions assume a basic familiarity with Conan and CMake. If you are
+unfamiliar with Conan, then please read [this crash course](./docs/build/conan.md) or the official
+[Getting Started][3] walkthrough.
 
-If you are unfamiliar with Conan, then please read [this crash course](./docs/build/conan.md) or the official [Getting Started][3] walkthrough.
+#### Default profile
 
-You'll need at least one Conan profile:
+We recommend that you import the provided `conan/profiles/default` profile:
 
-   ```
-   conan profile new default --detect
-   ```
-
-Update the compiler settings:
-
-   ```
-   conan profile update settings.compiler.cppstd=20 default
-   ```
-
-**Linux** developers will commonly have a default Conan [profile][] that compiles
-with GCC and links with libstdc++.
-If you are linking with libstdc++ (see profile setting `compiler.libcxx`),
-then you will need to choose the `libstdc++11` ABI:
-
-   ```
-   conan profile update settings.compiler.libcxx=libstdc++11 default
-   ```
-
-**Windows** developers may need to use the x64 native build tools.
-An easy way to do that is to run the shortcut "x64 Native Tools Command
-Prompt" for the version of Visual Studio that you have installed.
-
-   Windows developers must also build `rippled` and its dependencies for the x64
-   architecture:
-
-   ```
-   conan profile update settings.arch=x86_64 default
-   ```
-
-### Multiple compilers
-
-When `/usr/bin/g++` exists on a platform, it is the default cpp compiler. This
-default works for some users.
-
-However, if this compiler cannot build rippled or its dependencies, then you can
-install another compiler and set Conan and CMake to use it.
-Update the `conf.tools.build:compiler_executables` setting in order to set the correct variables (`CMAKE_<LANG>_COMPILER`) in the
-generated CMake toolchain file.
-For example, on Ubuntu 20, you may have gcc at `/usr/bin/gcc` and g++ at `/usr/bin/g++`; if that is the case, you can select those compilers with:
-```
-conan profile update 'conf.tools.build:compiler_executables={"c": "/usr/bin/gcc", "cpp": "/usr/bin/g++"}' default
+```bash
+conan config install conan/profiles/ -tf $(conan config home)/profiles/
 ```
 
-Replace `/usr/bin/gcc` and `/usr/bin/g++` with paths to the desired compilers.
+You can check your Conan profile by running:
 
-It should choose the compiler for dependencies as well,
-but not all of them have a Conan recipe that respects this setting (yet).
-For the rest, you can set these environment variables.
-Replace `<path>` with paths to the desired compilers:
+```bash
+conan profile show
+```
 
-- `conan profile update env.CC=<path> default`
-- `conan profile update env.CXX=<path> default`
+#### Custom profile
 
-Export our [Conan recipe for Snappy](./external/snappy).
-It does not explicitly link the C++ standard library,
-which allows you to statically link it with GCC, if you want.
+If the default profile does not work for you and you do not yet have a Conan
+profile, you can create one by running:
 
-   ```
-   conan export external/snappy snappy/1.1.10@
-   ```
+```bash
+conan profile detect
+```
 
-Export our [Conan recipe for SOCI](./external/soci).
-It patches their CMake to correctly import its dependencies.
+You may need to make changes to the profile to suit your environment. You can
+refer to the provided `conan/profiles/default` profile for inspiration, and you
+may also need to apply the required [tweaks](#conan-profile-tweaks) to this
+default profile.
 
-   ```
-   conan export external/soci soci/4.0.3@
-   ```
+### Patched recipes
+
+The recipes in Conan Center occasionally need to be patched for compatibility
+with the latest version of `rippled`. We maintain a fork of the Conan Center
+[here](https://github.com/XRPLF/conan-center-index/) containing the patches.
+
+To ensure our patched recipes are used, you must add our Conan remote at a
+higher index than the default Conan Center remote, so it is consulted first. You
+can do this by running:
+
+```bash
+conan remote add --index 0 xrplf https://conan.ripplex.io
+```
+
+Alternatively, you can pull the patched recipes into the repository and use them
+locally:
+
+```bash
+cd external
+git init
+git remote add origin git@github.com:XRPLF/conan-center-index.git
+git sparse-checkout init
+git sparse-checkout set recipes/snappy
+git sparse-checkout add recipes/soci
+git fetch origin master
+git checkout master
+conan export --version 1.1.10 recipes/snappy/all
+conan export --version 4.0.3 recipes/soci/all
+rm -rf .git
+```
+
+In the case we switch to a newer version of a dependency that still requires a
+patch, it will be necessary for you to pull in the changes and re-export the
+updated dependencies with the newer version. However, if we switch to a newer
+version that no longer requires a patch, no action is required on your part, as
+the new recipe will be automatically pulled from the official Conan Center.
+
+> [!NOTE]
+> You might need to add `--lockfile=""` to your `conan install` command
+> to avoid automatic use of the existing `conan.lock` file when you run `conan export` manually on your machine
+
+### Conan profile tweaks
+
+#### Missing compiler version
+
+If you see an error similar to the following after running `conan profile show`:
+
+```bash
+ERROR: Invalid setting '17' is not a valid 'settings.compiler.version' value.
+Possible values are ['5.0', '5.1', '6.0', '6.1', '7.0', '7.3', '8.0', '8.1',
+'9.0', '9.1', '10.0', '11.0', '12.0', '13', '13.0', '13.1', '14', '14.0', '15',
+'15.0', '16', '16.0']
+Read "http://docs.conan.io/2/knowledge/faq.html#error-invalid-setting"
+```
+
+you need to amend the list of compiler versions in
+`$(conan config home)/settings.yml`, by appending the required version number(s)
+to the `version` array specific for your compiler. For example:
+
+```yaml
+apple-clang:
+  version:
+    [
+      "5.0",
+      "5.1",
+      "6.0",
+      "6.1",
+      "7.0",
+      "7.3",
+      "8.0",
+      "8.1",
+      "9.0",
+      "9.1",
+      "10.0",
+      "11.0",
+      "12.0",
+      "13",
+      "13.0",
+      "13.1",
+      "14",
+      "14.0",
+      "15",
+      "15.0",
+      "16",
+      "16.0",
+      "17",
+      "17.0",
+    ]
+```
+
+#### Multiple compilers
+
+If you have multiple compilers installed, make sure to select the one to use in
+your default Conan configuration **before** running `conan profile detect`, by
+setting the `CC` and `CXX` environment variables.
+
+For example, if you are running MacOS and have [homebrew
+LLVM@18](https://formulae.brew.sh/formula/llvm@18), and want to use it as a
+compiler in the new Conan profile:
+
+```bash
+export CC=$(brew --prefix llvm@18)/bin/clang
+export CXX=$(brew --prefix llvm@18)/bin/clang++
+conan profile detect
+```
+
+You should also explicitly set the path to the compiler in the profile file,
+which helps to avoid errors when `CC` and/or `CXX` are set and disagree with the
+selected Conan profile. For example:
+
+```text
+[conf]
+tools.build:compiler_executables={'c':'/usr/bin/gcc','cpp':'/usr/bin/g++'}
+```
+
+#### Multiple profiles
+
+You can manage multiple Conan profiles in the directory
+`$(conan config home)/profiles`, for example renaming `default` to a different
+name and then creating a new `default` profile for a different compiler.
+
+#### Select language
+
+The default profile created by Conan will typically select different C++ dialect
+than C++20 used by this project. You should set `20` in the profile line
+starting with `compiler.cppstd=`. For example:
+
+```bash
+sed -i.bak -e 's|^compiler\.cppstd=.*$|compiler.cppstd=20|' $(conan config home)/profiles/default
+```
+
+#### Select standard library in Linux
+
+**Linux** developers will commonly have a default Conan [profile][] that
+compiles with GCC and links with libstdc++. If you are linking with libstdc++
+(see profile setting `compiler.libcxx`), then you will need to choose the
+`libstdc++11` ABI:
+
+```bash
+sed -i.bak -e 's|^compiler\.libcxx=.*$|compiler.libcxx=libstdc++11|' $(conan config home)/profiles/default
+```
+
+#### Select architecture and runtime in Windows
+
+**Windows** developers may need to use the x64 native build tools. An easy way
+to do that is to run the shortcut "x64 Native Tools Command Prompt" for the
+version of Visual Studio that you have installed.
+
+Windows developers must also build `rippled` and its dependencies for the x64
+architecture:
+
+```bash
+sed -i.bak -e 's|^arch=.*$|arch=x86_64|' $(conan config home)/profiles/default
+```
+
+**Windows** developers also must select static runtime:
+
+```bash
+sed -i.bak -e 's|^compiler\.runtime=.*$|compiler.runtime=static|' $(conan config home)/profiles/default
+```
+
+#### Clang workaround for grpc
+
+If your compiler is clang, version 19 or later, or apple-clang, version 17 or
+later, you may encounter a compilation error while building the `grpc`
+dependency:
+
+```text
+In file included from .../lib/promise/try_seq.h:26:
+.../lib/promise/detail/basic_seq.h:499:38: error: a template argument list is expected after a name prefixed by the template keyword [-Wmissing-template-arg-list-after-template-kw]
+  499 |                     Traits::template CallSeqFactory(f_, *cur_, std::move(arg)));
+      |                                      ^
+```
+
+The workaround for this error is to add two lines to profile:
+
+```text
+[conf]
+tools.build:cxxflags=['-Wno-missing-template-arg-list-after-template-kw']
+```
+
+#### Workaround for gcc 12
+
+If your compiler is gcc, version 12, and you have enabled `werr` option, you may
+encounter a compilation error such as:
+
+```text
+/usr/include/c++/12/bits/char_traits.h:435:56: error: 'void* __builtin_memcpy(void*, const void*, long unsigned int)' accessing 9223372036854775810 or more bytes at offsets [2, 9223372036854775807] and 1 may overlap up to 9223372036854775813 bytes at offset -3 [-Werror=restrict]
+  435 |         return static_cast<char_type*>(__builtin_memcpy(__s1, __s2, __n));
+      |                                        ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~
+cc1plus: all warnings being treated as errors
+```
+
+The workaround for this error is to add two lines to your profile:
+
+```text
+[conf]
+tools.build:cxxflags=['-Wno-restrict']
+```
+
+#### Workaround for clang 16
+
+If your compiler is clang, version 16, you may encounter compilation error such
+as:
+
+```text
+In file included from .../boost/beast/websocket/stream.hpp:2857:
+.../boost/beast/websocket/impl/read.hpp:695:17: error: call to 'async_teardown' is ambiguous
+                async_teardown(impl.role, impl.stream(),
+                ^~~~~~~~~~~~~~
+```
+
+The workaround for this error is to add two lines to your profile:
+
+```text
+[conf]
+tools.build:cxxflags=['-DBOOST_ASIO_DISABLE_CONCEPTS']
+```
 
 ### Build and Test
 
@@ -172,63 +353,67 @@ It patches their CMake to correctly import its dependencies.
    the `install-folder` or `-if` option to every `conan install` command
    in the next step.
 
-2. Generate CMake files for every configuration you want to build. 
+2. Use conan to generate CMake files for every configuration you want to build:
 
-    ```
-    conan install .. --output-folder . --build missing --settings build_type=Release
-    conan install .. --output-folder . --build missing --settings build_type=Debug
-    ```
+   ```
+   conan install .. --output-folder . --build missing --settings build_type=Release
+   conan install .. --output-folder . --build missing --settings build_type=Debug
+   ```
 
-    For a single-configuration generator, e.g. `Unix Makefiles` or `Ninja`,
-    you only need to run this command once.
-    For a multi-configuration generator, e.g. `Visual Studio`, you may want to
-    run it more than once.
+   To build Debug, in the next step, be sure to set `-DCMAKE_BUILD_TYPE=Debug`
 
-    Each of these commands should also have a different `build_type` setting.
-    A second command with the same `build_type` setting will overwrite the files
-    generated by the first. You can pass the build type on the command line with
-    `--settings build_type=$BUILD_TYPE` or in the profile itself,
-    under the section `[settings]` with the key `build_type`.
-    
-    If you are using a Microsoft Visual C++ compiler,
-    then you will need to ensure consistency between the `build_type` setting
-    and the `compiler.runtime` setting.
-    
-    When `build_type` is `Release`, `compiler.runtime` should be `MT`.
-    
-    When `build_type` is `Debug`, `compiler.runtime` should be `MTd`.
+   For a single-configuration generator, e.g. `Unix Makefiles` or `Ninja`,
+   you only need to run this command once.
+   For a multi-configuration generator, e.g. `Visual Studio`, you may want to
+   run it more than once.
 
-    ```
-    conan install .. --output-folder . --build missing --settings build_type=Release --settings compiler.runtime=MT
-    conan install .. --output-folder . --build missing --settings build_type=Debug --settings compiler.runtime=MTd
-    ```
+   Each of these commands should also have a different `build_type` setting.
+   A second command with the same `build_type` setting will overwrite the files
+   generated by the first. You can pass the build type on the command line with
+   `--settings build_type=$BUILD_TYPE` or in the profile itself,
+   under the section `[settings]` with the key `build_type`.
+
+   If you are using a Microsoft Visual C++ compiler,
+   then you will need to ensure consistency between the `build_type` setting
+   and the `compiler.runtime` setting.
+
+   When `build_type` is `Release`, `compiler.runtime` should be `MT`.
+
+   When `build_type` is `Debug`, `compiler.runtime` should be `MTd`.
+
+   ```
+   conan install .. --output-folder . --build missing --settings build_type=Release --settings compiler.runtime=MT
+   conan install .. --output-folder . --build missing --settings build_type=Debug --settings compiler.runtime=MTd
+   ```
 
 3. Configure CMake and pass the toolchain file generated by Conan, located at
    `$OUTPUT_FOLDER/build/generators/conan_toolchain.cmake`.
 
-    Single-config generators:
+   Single-config generators:
 
-    ```
-    cmake -DCMAKE_TOOLCHAIN_FILE:FILEPATH=build/generators/conan_toolchain.cmake -DCMAKE_BUILD_TYPE=Release ..
-    ```
+   Pass the CMake variable [`CMAKE_BUILD_TYPE`][build_type]
+   and make sure it matches the one of the `build_type` settings
+   you chose in the previous step.
 
-    Pass the CMake variable [`CMAKE_BUILD_TYPE`][build_type]
-    and make sure it matches the `build_type` setting you chose in the previous
-    step.
+   For example, to build Debug, in the next command, replace "Release" with "Debug"
 
-    Multi-config generators:
+   ```
+   cmake -DCMAKE_TOOLCHAIN_FILE:FILEPATH=build/generators/conan_toolchain.cmake -DCMAKE_BUILD_TYPE=Release -Dxrpld=ON -Dtests=ON ..
+   ```
 
-    ```
-    cmake -DCMAKE_TOOLCHAIN_FILE:FILEPATH=build/generators/conan_toolchain.cmake ..
-    ```
+   Multi-config generators:
 
-    **Note:** You can pass build options for `rippled` in this step.
+   ```
+   cmake -DCMAKE_TOOLCHAIN_FILE:FILEPATH=build/generators/conan_toolchain.cmake -Dxrpld=ON -Dtests=ON  ..
+   ```
+
+   **Note:** You can pass build options for `rippled` in this step.
 
 4. Build `rippled`.
 
    For a single-configuration generator, it will build whatever configuration
-   you passed for `CMAKE_BUILD_TYPE`. For a multi-configuration generator,
-   you must pass the option `--config` to select the build configuration. 
+   you passed for `CMAKE_BUILD_TYPE`. For a multi-configuration generator, you
+   must pass the option `--config` to select the build configuration.
 
    Single-config generators:
 
@@ -248,97 +433,173 @@ It patches their CMake to correctly import its dependencies.
    Single-config generators:
 
    ```
-   ./rippled --unittest
+   ./rippled --unittest --unittest-jobs N
    ```
 
    Multi-config generators:
 
    ```
-   ./Release/rippled --unittest
-   ./Debug/rippled --unittest
+   ./Release/rippled --unittest --unittest-jobs N
+   ./Debug/rippled --unittest --unittest-jobs N
    ```
 
-   The location of `rippled` in your build directory depends on your CMake
-   generator. Pass `--help` to see the rest of the command line options.
+   Replace the `--unittest-jobs` parameter N with the desired unit tests
+   concurrency. Recommended setting is half of the number of available CPU
+   cores.
 
+   The location of `rippled` binary in your build directory depends on your
+   CMake generator. Pass `--help` to see the rest of the command line options.
+
+#### Conan lockfile
+
+To achieve reproducible dependencies, we use [Conan lockfile](https://docs.conan.io/2/tutorial/versioning/lockfiles.html).
+
+The `conan.lock` file in the repository contains a "snapshot" of the current dependencies.
+It is implicitly used when running `conan` commands, you don't need to specify it.
+
+You have to update this file every time you add a new dependency or change a revision or version of an existing dependency.
+
+> [!NOTE]
+> Conan uses local cache by default when creating a lockfile.
+>
+> To ensure, that lockfile creation works the same way on all developer machines, you should clear the local cache before creating a new lockfile.
+
+To create a new lockfile, run the following commands in the repository root:
+
+```bash
+conan remove '*' --confirm
+rm conan.lock
+# This ensure that xrplf remote is the first to be consulted
+conan remote add --force --index 0 xrplf https://conan.ripplex.io
+conan lock create . -o '&:jemalloc=True' -o '&:rocksdb=True'
+```
+
+> [!NOTE]
+> If some dependencies are exclusive for some OS, you may need to run the last command for them adding `--profile:all <PROFILE>`.
+
+## Coverage report
+
+The coverage report is intended for developers using compilers GCC
+or Clang (including Apple Clang). It is generated by the build target `coverage`,
+which is only enabled when the `coverage` option is set, e.g. with
+`--options coverage=True` in `conan` or `-Dcoverage=ON` variable in `cmake`
+
+Prerequisites for the coverage report:
+
+- [gcovr tool][gcovr] (can be installed e.g. with [pip][python-pip])
+- `gcov` for GCC (installed with the compiler by default) or
+- `llvm-cov` for Clang (installed with the compiler by default)
+- `Debug` build type
+
+A coverage report is created when the following steps are completed, in order:
+
+1. `rippled` binary built with instrumentation data, enabled by the `coverage`
+   option mentioned above
+2. completed run of unit tests, which populates coverage capture data
+3. completed run of the `gcovr` tool (which internally invokes either `gcov` or `llvm-cov`)
+   to assemble both instrumentation data and the coverage capture data into a coverage report
+
+The above steps are automated into a single target `coverage`. The instrumented
+`rippled` binary can also be used for regular development or testing work, at
+the cost of extra disk space utilization and a small performance hit
+(to store coverage capture). In case of a spurious failure of unit tests, it is
+possible to re-run the `coverage` target without rebuilding the `rippled` binary
+(since it is simply a dependency of the coverage report target). It is also possible
+to select only specific tests for the purpose of the coverage report, by setting
+the `coverage_test` variable in `cmake`
+
+The default coverage report format is `html-details`, but the user
+can override it to any of the formats listed in `Builds/CMake/CodeCoverage.cmake`
+by setting the `coverage_format` variable in `cmake`. It is also possible
+to generate more than one format at a time by setting the `coverage_extra_args`
+variable in `cmake`. The specific command line used to run the `gcovr` tool will be
+displayed if the `CODE_COVERAGE_VERBOSE` variable is set.
+
+By default, the code coverage tool runs parallel unit tests with `--unittest-jobs`
+set to the number of available CPU cores. This may cause spurious test
+errors on Apple. Developers can override the number of unit test jobs with
+the `coverage_test_parallelism` variable in `cmake`.
+
+Example use with some cmake variables set:
+
+```
+cd .build
+conan install .. --output-folder . --build missing --settings build_type=Debug
+cmake -DCMAKE_BUILD_TYPE=Debug -Dcoverage=ON -Dxrpld=ON -Dtests=ON -Dcoverage_test_parallelism=2 -Dcoverage_format=html-details -Dcoverage_extra_args="--json coverage.json" -DCMAKE_TOOLCHAIN_FILE:FILEPATH=build/generators/conan_toolchain.cmake ..
+cmake --build . --target coverage
+```
+
+After the `coverage` target is completed, the generated coverage report will be
+stored inside the build directory, as either of:
+
+- file named `coverage.`_extension_, with a suitable extension for the report format, or
+- directory named `coverage`, with the `index.html` and other files inside, for the `html-details` or `html-nested` report formats.
 
 ## Options
 
-| Option | Default Value | Description |
-| --- | ---| ---|
-| `assert` | OFF | Enable assertions.
-| `reporting` | OFF | Build the reporting mode feature. |
-| `tests` | ON | Build tests. |
-| `unity` | ON | Configure a unity build. |
-| `san` | N/A | Enable a sanitizer with Clang. Choices are `thread` and `address`. |
+| Option     | Default Value | Description                                                                |
+| ---------- | ------------- | -------------------------------------------------------------------------- |
+| `assert`   | OFF           | Enable assertions.                                                         |
+| `coverage` | OFF           | Prepare the coverage report.                                               |
+| `san`      | N/A           | Enable a sanitizer with Clang. Choices are `thread` and `address`.         |
+| `tests`    | OFF           | Build tests.                                                               |
+| `unity`    | OFF           | Configure a unity build.                                                   |
+| `xrpld`    | OFF           | Build the xrpld (`rippled`) application, and not just the libxrpl library. |
+| `werr`     | OFF           | Treat compilation warnings as errors                                       |
+| `wextra`   | OFF           | Enable additional compilation warnings                                     |
 
 [Unity builds][5] may be faster for the first build
 (at the cost of much more memory) since they concatenate sources into fewer
 translation units. Non-unity builds may be faster for incremental builds,
 and can be helpful for detecting `#include` omissions.
 
-
 ## Troubleshooting
 
-
 ### Conan
 
 After any updates or changes to dependencies, you may need to do the following:
 
 1. Remove your build directory.
-2. Remove the Conan cache:
+2. Remove individual libraries from the Conan cache, e.g.
+
+   ```bash
+   conan remove 'grpc/*'
    ```
-   rm -rf ~/.conan/data
+
+   **or**
+
+   Remove all libraries from Conan cache:
+
+   ```bash
+   conan remove '*'
    ```
-4. Re-run [conan install](#build-and-test).
 
+3. Re-run [conan export](#patched-recipes) if needed.
+4. [Regenerate lockfile](#conan-lockfile).
+5. Re-run [conan install](#build-and-test).
 
-### no std::result_of
+#### ERROR: Package not resolved
 
-If your compiler version is recent enough to have removed `std::result_of` as
-part of C++20, e.g. Apple Clang 15.0, then you might need to add a preprocessor
-definition to your build.
+If you're seeing an error like `ERROR: Package 'snappy/1.1.10' not resolved: Unable to find 'snappy/1.1.10#968fef506ff261592ec30c574d4a7809%1756234314.246' in remotes.`,
+please add `xrplf` remote or re-run `conan export` for [patched recipes](#patched-recipes).
+
+### `protobuf/port_def.inc` file not found
+
+If `cmake --build .` results in an error due to a missing a protobuf file, then
+you might have generated CMake files for a different `build_type` than the
+`CMAKE_BUILD_TYPE` you passed to Conan.
 
 ```
-conan profile update 'options.boost:extra_b2_flags="define=BOOST_ASIO_HAS_STD_INVOKE_RESULT"' default
-conan profile update 'env.CFLAGS="-DBOOST_ASIO_HAS_STD_INVOKE_RESULT"' default
-conan profile update 'env.CXXFLAGS="-DBOOST_ASIO_HAS_STD_INVOKE_RESULT"' default
-conan profile update 'conf.tools.build:cflags+=["-DBOOST_ASIO_HAS_STD_INVOKE_RESULT"]' default
-conan profile update 'conf.tools.build:cxxflags+=["-DBOOST_ASIO_HAS_STD_INVOKE_RESULT"]' default
+/rippled/.build/pb-xrpl.libpb/xrpl/proto/ripple.pb.h:10:10: fatal error: 'google/protobuf/port_def.inc' file not found
+   10 | #include <google/protobuf/port_def.inc>
+      |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+1 error generated.
 ```
 
+For example, if you want to build Debug:
 
-### call to 'async_teardown' is ambiguous
-
-If you are compiling with an early version of Clang 16, then you might hit
-a [regression][6] when compiling C++20 that manifests as an [error in a Boost
-header][7]. You can workaround it by adding this preprocessor definition:
-
-```
-conan profile update 'env.CXXFLAGS="-DBOOST_ASIO_DISABLE_CONCEPTS"' default
-conan profile update 'conf.tools.build:cxxflags+=["-DBOOST_ASIO_DISABLE_CONCEPTS"]' default
-```
-
-
-### recompile with -fPIC
-
-If you get a linker error suggesting that you recompile Boost with
-position-independent code, such as:
-
-```
-/usr/bin/ld.gold: error: /home/username/.conan/data/boost/1.77.0/_/_/package/.../lib/libboost_container.a(alloc_lib.o):
-  requires unsupported dynamic reloc 11; recompile with -fPIC
-```
-
-Conan most likely downloaded a bad binary distribution of the dependency.
-This seems to be a [bug][1] in Conan just for Boost 1.77.0 compiled with GCC
-for Linux. The solution is to build the dependency locally by passing
-`--build boost` when calling `conan install`.
-
-```
-conan install --build boost ...
-```
-
+1. For conan install, pass `--settings build_type=Debug`
+2. For cmake, pass `-DCMAKE_BUILD_TYPE=Debug`
 
 ## Add a Dependency
 
@@ -346,28 +607,22 @@ If you want to experiment with a new package, follow these steps:
 
 1. Search for the package on [Conan Center](https://conan.io/center/).
 2. Modify [`conanfile.py`](./conanfile.py):
-    - Add a version of the package to the `requires` property.
-    - Change any default options for the package by adding them to the
-    `default_options` property (with syntax `'$package:$option': $value`).
+   - Add a version of the package to the `requires` property.
+   - Change any default options for the package by adding them to the
+     `default_options` property (with syntax `'$package:$option': $value`).
 3. Modify [`CMakeLists.txt`](./CMakeLists.txt):
-    - Add a call to `find_package($package REQUIRED)`.
-    - Link a library from the package to the target `ripple_libs`
-    (search for the existing call to `target_link_libraries(ripple_libs INTERFACE ...)`).
+   - Add a call to `find_package($package REQUIRED)`.
+   - Link a library from the package to the target `ripple_libs`
+     (search for the existing call to `target_link_libraries(ripple_libs INTERFACE ...)`).
 4. Start coding! Don't forget to include whatever headers you need from the package.
 
-
 [1]: https://github.com/conan-io/conan-center-index/issues/13168
 [2]: https://en.cppreference.com/w/cpp/compiler_support/20
 [3]: https://docs.conan.io/en/latest/getting_started.html
 [5]: https://en.wikipedia.org/wiki/Unity_build
 [6]: https://github.com/boostorg/beast/issues/2648
 [7]: https://github.com/boostorg/beast/issues/2661
+[gcovr]: https://gcovr.com/en/stable/getting-started.html
+[python-pip]: https://packaging.python.org/en/latest/guides/installing-using-pip-and-virtual-environments/
 [build_type]: https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html
-[runtime]: https://cmake.org/cmake/help/latest/variable/CMAKE_MSVC_RUNTIME_LIBRARY.html
-[toolchain]: https://cmake.org/cmake/help/latest/manual/cmake-toolchains.7.html
-[pcf]: https://cmake.org/cmake/help/latest/manual/cmake-packages.7.html#package-configuration-file
-[pvf]: https://cmake.org/cmake/help/latest/manual/cmake-packages.7.html#package-version-file
-[find_package]: https://cmake.org/cmake/help/latest/command/find_package.html
-[search]: https://cmake.org/cmake/help/latest/command/find_package.html#search-procedure
-[prefix_path]: https://cmake.org/cmake/help/latest/variable/CMAKE_PREFIX_PATH.html
 [profile]: https://docs.conan.io/en/latest/reference/profiles.html

Builds/CMake/CMakeFuncs.cmake

@@ -1,207 +0,0 @@
-
-macro(group_sources_in source_dir curdir)
-  file(GLOB children RELATIVE ${source_dir}/${curdir}
-    ${source_dir}/${curdir}/*)
-  foreach (child ${children})
-    if (IS_DIRECTORY ${source_dir}/${curdir}/${child})
-      group_sources_in(${source_dir} ${curdir}/${child})
-    else()
-      string(REPLACE "/" "\\" groupname ${curdir})
-      source_group(${groupname} FILES
-        ${source_dir}/${curdir}/${child})
-    endif()
-  endforeach()
-endmacro()
-
-macro(group_sources curdir)
-  group_sources_in(${PROJECT_SOURCE_DIR} ${curdir})
-endmacro()
-
-macro (exclude_from_default target_)
-  set_target_properties (${target_} PROPERTIES EXCLUDE_FROM_ALL ON)
-  set_target_properties (${target_} PROPERTIES EXCLUDE_FROM_DEFAULT_BUILD ON)
-endmacro ()
-
-macro (exclude_if_included target_)
-  get_directory_property(has_parent PARENT_DIRECTORY)
-  if (has_parent)
-    exclude_from_default (${target_})
-  endif ()
-endmacro ()
-
-function (print_ep_logs _target)
-  ExternalProject_Get_Property (${_target} STAMP_DIR)
-  add_custom_command(TARGET ${_target} POST_BUILD
-    COMMENT "${_target} BUILD OUTPUT"
-    COMMAND ${CMAKE_COMMAND}
-      -DIN_FILE=${STAMP_DIR}/${_target}-build-out.log
-      -P ${CMAKE_CURRENT_SOURCE_DIR}/Builds/CMake/echo_file.cmake
-    COMMAND ${CMAKE_COMMAND}
-      -DIN_FILE=${STAMP_DIR}/${_target}-build-err.log
-      -P ${CMAKE_CURRENT_SOURCE_DIR}/Builds/CMake/echo_file.cmake)
-endfunction ()
-
-#[=========================================================[
-  This is a function override for one function in the
-  standard ExternalProject module. We want to change
-  the generated build script slightly to include printing
-  the build logs in the case of failure. Those modifications
-  have been made here. This function override could break
-  in the future if the ExternalProject module changes internal
-  function names or changes the way it generates the build
-  scripts.
-   See:
-    https://gitlab.kitware.com/cmake/cmake/blob/df1ddeec128d68cc636f2dde6c2acd87af5658b6/Modules/ExternalProject.cmake#L1855-1952
-#]=========================================================]
-
-function(_ep_write_log_script name step cmd_var)
-  ExternalProject_Get_Property(${name} stamp_dir)
-  set(command "${${cmd_var}}")
-
-  set(make "")
-  set(code_cygpath_make "")
-  if(command MATCHES "^\\$\\(MAKE\\)")
-    # GNU make recognizes the string "$(MAKE)" as recursive make, so
-    # ensure that it appears directly in the makefile.
-    string(REGEX REPLACE "^\\$\\(MAKE\\)" "\${make}" command "${command}")
-    set(make "-Dmake=$(MAKE)")
-
-    if(WIN32 AND NOT CYGWIN)
-      set(code_cygpath_make "
-if(\${make} MATCHES \"^/\")
-  execute_process(
-    COMMAND cygpath -w \${make}
-    OUTPUT_VARIABLE cygpath_make
-    ERROR_VARIABLE cygpath_make
-    RESULT_VARIABLE cygpath_error
-    OUTPUT_STRIP_TRAILING_WHITESPACE
-  )
-  if(NOT cygpath_error)
-    set(make \${cygpath_make})
-  endif()
-endif()
-")
-    endif()
-  endif()
-
-  set(config "")
-  if("${CMAKE_CFG_INTDIR}" MATCHES "^\\$")
-    string(REPLACE "${CMAKE_CFG_INTDIR}" "\${config}" command "${command}")
-    set(config "-Dconfig=${CMAKE_CFG_INTDIR}")
-  endif()
-
-  # Wrap multiple 'COMMAND' lines up into a second-level wrapper
-  # script so all output can be sent to one log file.
-  if(command MATCHES "(^|;)COMMAND;")
-    set(code_execute_process "
-${code_cygpath_make}
-execute_process(COMMAND \${command} RESULT_VARIABLE result)
-if(result)
-  set(msg \"Command failed (\${result}):\\n\")
-  foreach(arg IN LISTS command)
-    set(msg \"\${msg} '\${arg}'\")
-  endforeach()
-  message(FATAL_ERROR \"\${msg}\")
-endif()
-")
-    set(code "")
-    set(cmd "")
-    set(sep "")
-    foreach(arg IN LISTS command)
-      if("x${arg}" STREQUAL "xCOMMAND")
-        if(NOT "x${cmd}" STREQUAL "x")
-          string(APPEND code "set(command \"${cmd}\")${code_execute_process}")
-        endif()
-        set(cmd "")
-        set(sep "")
-      else()
-        string(APPEND cmd "${sep}${arg}")
-        set(sep ";")
-      endif()
-    endforeach()
-    string(APPEND code "set(command \"${cmd}\")${code_execute_process}")
-    file(GENERATE OUTPUT "${stamp_dir}/${name}-${step}-$<CONFIG>-impl.cmake" CONTENT "${code}")
-    set(command ${CMAKE_COMMAND} "-Dmake=\${make}" "-Dconfig=\${config}" -P ${stamp_dir}/${name}-${step}-$<CONFIG>-impl.cmake)
-  endif()
-
-  # Wrap the command in a script to log output to files.
-  set(script ${stamp_dir}/${name}-${step}-$<CONFIG>.cmake)
-  set(logbase ${stamp_dir}/${name}-${step})
-  set(code "
-${code_cygpath_make}
-function (_echo_file _fil)
-  file (READ \${_fil} _cont)
-  execute_process (COMMAND \${CMAKE_COMMAND} -E echo \"\${_cont}\")
-endfunction ()
-set(command \"${command}\")
-execute_process(
-  COMMAND \${command}
-  RESULT_VARIABLE result
-  OUTPUT_FILE \"${logbase}-out.log\"
-  ERROR_FILE \"${logbase}-err.log\"
-  )
-if(result)
-  set(msg \"Command failed: \${result}\\n\")
-  foreach(arg IN LISTS command)
-    set(msg \"\${msg} '\${arg}'\")
-  endforeach()
-  execute_process (COMMAND \${CMAKE_COMMAND} -E echo \"Build output for ${logbase} : \")
-  _echo_file (\"${logbase}-out.log\")
-  _echo_file (\"${logbase}-err.log\")
-  set(msg \"\${msg}\\nSee above\\n\")
-  message(FATAL_ERROR \"\${msg}\")
-else()
-  set(msg \"${name} ${step} command succeeded.  See also ${logbase}-*.log\")
-  message(STATUS \"\${msg}\")
-endif()
-")
-  file(GENERATE OUTPUT "${script}" CONTENT "${code}")
-  set(command ${CMAKE_COMMAND} ${make} ${config} -P ${script})
-  set(${cmd_var} "${command}" PARENT_SCOPE)
-endfunction()
-
-find_package(Git)
-
-# function that calls git log to get current hash
-function (git_hash hash_val)
-  # note: optional second extra string argument not in signature
-  if (NOT GIT_FOUND)
-    return ()
-  endif ()
-  set (_hash "")
-  set (_format "%H")
-  if (ARGC GREATER_EQUAL 2)
-    string (TOLOWER ${ARGV1} _short)
-    if (_short STREQUAL "short")
-      set (_format "%h")
-    endif ()
-  endif ()
-  execute_process (COMMAND ${GIT_EXECUTABLE} "log" "--pretty=${_format}" "-n1"
-                   WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
-                   RESULT_VARIABLE _git_exit_code
-                   OUTPUT_VARIABLE _temp_hash
-                   OUTPUT_STRIP_TRAILING_WHITESPACE
-                   ERROR_QUIET)
-  if (_git_exit_code EQUAL 0)
-    set (_hash ${_temp_hash})
-  endif ()
-  set (${hash_val} "${_hash}" PARENT_SCOPE)
-endfunction ()
-
-function (git_branch branch_val)
-  if (NOT GIT_FOUND)
-    return ()
-  endif ()
-  set (_branch "")
-  execute_process (COMMAND ${GIT_EXECUTABLE} "rev-parse" "--abbrev-ref" "HEAD"
-                   WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
-                   RESULT_VARIABLE _git_exit_code
-                   OUTPUT_VARIABLE _temp_branch
-                   OUTPUT_STRIP_TRAILING_WHITESPACE
-                   ERROR_QUIET)
-  if (_git_exit_code EQUAL 0)
-    set (_branch ${_temp_branch})
-  endif ()
-  set (${branch_val} "${_branch}" PARENT_SCOPE)
-endfunction ()
-

Builds/CMake/CMake_sqlite3.txt

@@ -1,60 +0,0 @@
-
-#[=========================================================[
-  SQLITE doesn't provide build files in the
-  standard source-only distribution. So we wrote
-  a simple cmake file and we copy it to the
-  external project folder so that we can use
-  this file to build the lib with ExternalProject
-#]=========================================================]
-
-add_library (sqlite3 STATIC sqlite3.c)
-#[=========================================================[
-   When compiled with SQLITE_THREADSAFE=1, SQLite operates
-   in serialized mode. In this mode, SQLite can be safely
-   used by multiple threads with no restriction.
-
-   NOTE: This implies a global mutex!
-
-   When compiled with SQLITE_THREADSAFE=2, SQLite can be
-   used in a multithreaded program so long as no two
-   threads attempt to use the same database connection at
-   the same time.
-
-   NOTE: This is the preferred threading model, but not
-   currently enabled because we need to investigate our
-   use-model and concurrency requirements.
-
-   TODO: consider whether any other options should be
-   used: https://www.sqlite.org/compile.html
-#]=========================================================]
-
-target_compile_definitions (sqlite3
-  PRIVATE
-    SQLITE_THREADSAFE=1
-    HAVE_USLEEP=1)
-target_compile_options (sqlite3
-  PRIVATE
-    $<$<BOOL:${MSVC}>:
-      -wd4100
-      -wd4127
-      -wd4232
-      -wd4244
-      -wd4701
-      -wd4706
-      -wd4996
-    >
-    $<$<NOT:$<BOOL:${MSVC}>>:-Wno-array-bounds>)
-install (
-  TARGETS
-    sqlite3
-  LIBRARY DESTINATION lib
-  ARCHIVE DESTINATION lib
-  RUNTIME DESTINATION bin
-  INCLUDES DESTINATION include)
-install (
-  FILES
-    sqlite3.h
-    sqlite3ext.h
-  DESTINATION include)
-
-

Builds/CMake/RippledCov.cmake

@@ -1,98 +0,0 @@
-#[===================================================================[
-   coverage report target
-#]===================================================================]
-
-if (coverage)
-  if (is_clang)
-    if (APPLE)
-      execute_process (COMMAND xcrun -f llvm-profdata
-        OUTPUT_VARIABLE LLVM_PROFDATA
-        OUTPUT_STRIP_TRAILING_WHITESPACE)
-    else ()
-      find_program (LLVM_PROFDATA llvm-profdata)
-    endif ()
-    if (NOT LLVM_PROFDATA)
-      message (WARNING "unable to find llvm-profdata - skipping coverage_report target")
-    endif ()
-
-    if (APPLE)
-      execute_process (COMMAND xcrun -f llvm-cov
-        OUTPUT_VARIABLE LLVM_COV
-        OUTPUT_STRIP_TRAILING_WHITESPACE)
-    else ()
-      find_program (LLVM_COV llvm-cov)
-    endif ()
-    if (NOT LLVM_COV)
-      message (WARNING "unable to find llvm-cov - skipping coverage_report target")
-    endif ()
-
-    set (extract_pattern "")
-    if (coverage_core_only)
-      set (extract_pattern "${CMAKE_CURRENT_SOURCE_DIR}/src/ripple/")
-    endif ()
-
-    if (LLVM_COV AND LLVM_PROFDATA)
-      add_custom_target (coverage_report
-        USES_TERMINAL
-        COMMAND ${CMAKE_COMMAND} -E echo "Generating coverage - results will be in ${CMAKE_BINARY_DIR}/coverage/index.html."
-        COMMAND ${CMAKE_COMMAND} -E echo "Running rippled tests."
-        COMMAND rippled --unittest$<$<BOOL:${coverage_test}>:=${coverage_test}> --quiet --unittest-log
-        COMMAND ${LLVM_PROFDATA}
-          merge -sparse default.profraw -o rip.profdata
-        COMMAND ${CMAKE_COMMAND} -E echo "Summary of coverage:"
-        COMMAND ${LLVM_COV}
-          report -instr-profile=rip.profdata
-          $<TARGET_FILE:rippled> ${extract_pattern}
-        # generate html report
-        COMMAND ${LLVM_COV}
-          show -format=html -output-dir=${CMAKE_BINARY_DIR}/coverage
-          -instr-profile=rip.profdata
-          $<TARGET_FILE:rippled> ${extract_pattern}
-        BYPRODUCTS coverage/index.html)
-    endif ()
-  elseif (is_gcc)
-    find_program (LCOV lcov)
-    if (NOT LCOV)
-      message (WARNING "unable to find lcov - skipping coverage_report target")
-    endif ()
-
-    find_program (GENHTML genhtml)
-    if (NOT GENHTML)
-      message (WARNING "unable to find genhtml - skipping coverage_report target")
-    endif ()
-
-    set (extract_pattern "*")
-    if (coverage_core_only)
-      set (extract_pattern "*/src/ripple/*")
-    endif ()
-
-    if (LCOV AND GENHTML)
-      add_custom_target (coverage_report
-        USES_TERMINAL
-        COMMAND ${CMAKE_COMMAND} -E echo "Generating coverage- results will be in ${CMAKE_BINARY_DIR}/coverage/index.html."
-        # create baseline info file
-        COMMAND ${LCOV}
-          --no-external -d "${CMAKE_CURRENT_SOURCE_DIR}" -c -d . -i -o baseline.info
-          | grep -v "ignoring data for external file"
-        # run tests
-        COMMAND ${CMAKE_COMMAND} -E echo "Running rippled tests for coverage report."
-        COMMAND rippled --unittest$<$<BOOL:${coverage_test}>:=${coverage_test}> --quiet --unittest-log
-        # Create test coverage data file
-        COMMAND ${LCOV}
-          --no-external -d "${CMAKE_CURRENT_SOURCE_DIR}" -c -d . -o tests.info
-          | grep -v "ignoring data for external file"
-        # Combine baseline and test coverage data
-        COMMAND ${LCOV}
-          -a baseline.info -a tests.info -o lcov-all.info
-        # extract our files
-        COMMAND ${LCOV}
-          -e lcov-all.info "${extract_pattern}" -o lcov.info
-        COMMAND ${CMAKE_COMMAND} -E echo "Summary of coverage:"
-        COMMAND ${LCOV} --summary lcov.info
-        # generate HTML report
-        COMMAND ${GENHTML}
-          -o ${CMAKE_BINARY_DIR}/coverage lcov.info
-        BYPRODUCTS coverage/index.html)
-    endif ()
-  endif ()
-endif ()

Builds/CMake/RippledMultiConfig.cmake

@@ -1,39 +0,0 @@
-#[===================================================================[
-   multiconfig misc
-#]===================================================================]
-
-if (is_multiconfig)
-  # This code finds all source files in the src subdirectory for inclusion
-  # in the IDE file tree as non-compiled sources. Since this file list will
-  # have some overlap with files we have already added to our targets to
-  # be compiled, we explicitly remove any of these target source files from
-  # this list.
-  file (GLOB_RECURSE all_sources RELATIVE ${CMAKE_CURRENT_SOURCE_DIR}
-    CONFIGURE_DEPENDS
-    src/*.* Builds/*.md docs/*.md src/*.md Builds/*.cmake)
-  file(GLOB md_files RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} CONFIGURE_DEPENDS
-    *.md)
-  LIST(APPEND all_sources ${md_files})
-  foreach (_target secp256k1::secp256k1 ed25519::ed25519 xrpl_core rippled)
-    get_target_property (_type ${_target} TYPE)
-    if(_type STREQUAL "INTERFACE_LIBRARY")
-      continue()
-    endif()
-    get_target_property (_src ${_target} SOURCES)
-    list (REMOVE_ITEM all_sources ${_src})
-  endforeach ()
-  target_sources (rippled PRIVATE ${all_sources})
-  set_property (
-    SOURCE ${all_sources}
-    APPEND
-    PROPERTY HEADER_FILE_ONLY true)
-  if (MSVC)
-    set_property(
-      DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
-      PROPERTY VS_STARTUP_PROJECT rippled)
-  endif ()
-
-  group_sources(src)
-  group_sources(docs)
-  group_sources(Builds)
-endif ()

Builds/CMake/RippledRelease.cmake

@@ -1,180 +0,0 @@
-#[===================================================================[
-   package/container targets - (optional)
-#]===================================================================]
-
-if (is_root_project)
-  if (NOT DOCKER)
-    find_program (DOCKER docker)
-  endif ()
-
-  if (DOCKER)
-    # if no container label is provided, use current git hash
-    git_hash (commit_hash)
-    if (NOT container_label)
-      set (container_label ${commit_hash})
-    endif ()
-    message (STATUS "using [${container_label}] as build container tag...")
-
-    file (MAKE_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/packages)
-
-    #[===================================================================[
-        rpm
-    #]===================================================================]
-    add_custom_target (rpm_container
-      docker build
-        --pull
-        --build-arg GIT_COMMIT=${commit_hash}
-        -t rippleci/rippled-rpm-builder:${container_label}
-        $<$<BOOL:${rpm_cache_from}>:--cache-from=${rpm_cache_from}>
-        -f centos-builder/Dockerfile .
-      WORKING_DIRECTORY  ${CMAKE_CURRENT_SOURCE_DIR}/Builds/containers
-      VERBATIM
-      USES_TERMINAL
-      COMMAND_EXPAND_LISTS
-      SOURCES
-        Builds/containers/centos-builder/Dockerfile
-        Builds/containers/centos-builder/centos_setup.sh
-        Builds/containers/shared/update-rippled.sh
-        Builds/containers/shared/update_sources.sh
-        Builds/containers/shared/rippled.service
-        Builds/containers/shared/rippled-reporting.service
-        Builds/containers/packaging/rpm/rippled.spec
-        Builds/containers/packaging/rpm/build_rpm.sh
-        Builds/containers/packaging/rpm/50-rippled.preset
-        Builds/containers/packaging/rpm/50-rippled-reporting.preset
-        bin/getRippledInfo
-    )
-    exclude_from_default (rpm_container)
-    add_custom_target (rpm
-      docker run
-        -v ${CMAKE_CURRENT_SOURCE_DIR}:/opt/rippled_bld/pkg/rippled
-        -v ${CMAKE_CURRENT_BINARY_DIR}/packages:/opt/rippled_bld/pkg/out
-        -t rippled-rpm-builder:${container_label}
-        /bin/bash -c "cp -fpu rippled/Builds/containers/packaging/rpm/build_rpm.sh . && ./build_rpm.sh"
-      VERBATIM
-      USES_TERMINAL
-      COMMAND_EXPAND_LISTS
-      SOURCES
-        Builds/containers/packaging/rpm/rippled.spec
-    )
-    exclude_from_default (rpm)
-    if (NOT have_package_container)
-      add_dependencies(rpm rpm_container)
-    endif ()
-    #[===================================================================[
-        dpkg
-    #]===================================================================]
-    # currently use ubuntu 18.04 as a base b/c it has one of
-    # the lower versions of libc among ubuntu and debian releases.
-    # we could change this in the future and build with some other deb
-    # based system.
-    add_custom_target (dpkg_container
-      docker build
-        --pull
-        --build-arg DIST_TAG=18.04
-        --build-arg GIT_COMMIT=${commit_hash}
-        -t rippled-dpkg-builder:${container_label}
-        $<$<BOOL:${dpkg_cache_from}>:--cache-from=${dpkg_cache_from}>
-        -f ubuntu-builder/Dockerfile .
-      WORKING_DIRECTORY  ${CMAKE_CURRENT_SOURCE_DIR}/Builds/containers
-      VERBATIM
-      USES_TERMINAL
-      COMMAND_EXPAND_LISTS
-      SOURCES
-        Builds/containers/packaging/dpkg/debian/rippled-reporting.links
-        Builds/containers/packaging/dpkg/debian/copyright
-        Builds/containers/packaging/dpkg/debian/rules
-        Builds/containers/packaging/dpkg/debian/rippled-reporting.install
-        Builds/containers/packaging/dpkg/debian/rippled-reporting.postinst
-        Builds/containers/packaging/dpkg/debian/rippled.links
-        Builds/containers/packaging/dpkg/debian/rippled.prerm
-        Builds/containers/packaging/dpkg/debian/rippled.postinst
-        Builds/containers/packaging/dpkg/debian/rippled-dev.install
-        Builds/containers/packaging/dpkg/debian/dirs
-        Builds/containers/packaging/dpkg/debian/rippled.postrm
-        Builds/containers/packaging/dpkg/debian/rippled.conffiles
-        Builds/containers/packaging/dpkg/debian/compat
-        Builds/containers/packaging/dpkg/debian/source/format
-        Builds/containers/packaging/dpkg/debian/source/local-options
-        Builds/containers/packaging/dpkg/debian/README.Debian
-        Builds/containers/packaging/dpkg/debian/rippled.install
-        Builds/containers/packaging/dpkg/debian/rippled.preinst
-        Builds/containers/packaging/dpkg/debian/docs
-        Builds/containers/packaging/dpkg/debian/control
-        Builds/containers/packaging/dpkg/debian/rippled-reporting.dirs
-        Builds/containers/packaging/dpkg/build_dpkg.sh
-        Builds/containers/ubuntu-builder/Dockerfile
-        Builds/containers/ubuntu-builder/ubuntu_setup.sh
-        bin/getRippledInfo
-        Builds/containers/shared/install_cmake.sh
-        Builds/containers/shared/update-rippled.sh
-        Builds/containers/shared/update_sources.sh
-        Builds/containers/shared/rippled.service
-        Builds/containers/shared/rippled-reporting.service
-        Builds/containers/shared/rippled-logrotate
-        Builds/containers/shared/update-rippled-cron
-    )
-    exclude_from_default (dpkg_container)
-    add_custom_target (dpkg
-      docker run
-        -v ${CMAKE_CURRENT_SOURCE_DIR}:/opt/rippled_bld/pkg/rippled
-        -v ${CMAKE_CURRENT_BINARY_DIR}/packages:/opt/rippled_bld/pkg/out
-        -t rippled-dpkg-builder:${container_label}
-        /bin/bash -c "cp -fpu rippled/Builds/containers/packaging/dpkg/build_dpkg.sh . && ./build_dpkg.sh"
-      VERBATIM
-      USES_TERMINAL
-      COMMAND_EXPAND_LISTS
-      SOURCES
-        Builds/containers/packaging/dpkg/debian/control
-    )
-    exclude_from_default (dpkg)
-    if (NOT have_package_container)
-      add_dependencies(dpkg dpkg_container)
-    endif ()
-    #[===================================================================[
-        ci container
-    #]===================================================================]
-    # now use the same ubuntu image for our travis-ci docker images,
-    # but we use a newer distro (18.04 vs 16.04).
-    #
-    # the following steps assume the github pkg repo, but it's possible to
-    # adapt these for other docker hub repositories.
-    #
-    # steps for publishing a new CI image when you make changes:
-    #
-    #   mkdir bld.ci && cd bld.ci && cmake -Dpackages_only=ON -Dcontainer_label=CI_LATEST
-    #   cmake --build . --target ci_container --verbose
-    #   docker tag rippled-ci-builder:CI_LATEST <HUB REPO PATH>/rippled-ci-builder:YYYY-MM-DD
-    #      (NOTE: change YYYY-MM-DD to match current date, or use a different
-    #             tag/version scheme if you prefer)
-    #   docker push <HUB REPO PATH>/rippled-ci-builder:YYYY-MM-DD
-    #      (NOTE: <HUB REPO PATH> is probably your user or org name if using
-    #             docker hub, or it might be something like
-    #             docker.pkg.github.com/ripple/rippled if using the github pkg
-    #             registry. for any registry, you will need to be logged-in via
-    #             docker and have push access.)
-    #
-    # ...then change the DOCKER_IMAGE line in .travis.yml :
-    #     - DOCKER_IMAGE="<HUB REPO PATH>/rippled-ci-builder:YYYY-MM-DD"
-    add_custom_target (ci_container
-      docker build
-        --pull
-        --build-arg DIST_TAG=18.04
-        --build-arg GIT_COMMIT=${commit_hash}
-        --build-arg CI_USE=true
-        -t rippled-ci-builder:${container_label}
-        $<$<BOOL:${ci_cache_from}>:--cache-from=${ci_cache_from}>
-        -f ubuntu-builder/Dockerfile .
-      WORKING_DIRECTORY  ${CMAKE_CURRENT_SOURCE_DIR}/Builds/containers
-      VERBATIM
-      USES_TERMINAL
-      COMMAND_EXPAND_LISTS
-      SOURCES
-        Builds/containers/ubuntu-builder/Dockerfile
-        Builds/containers/ubuntu-builder/ubuntu_setup.sh
-    )
-    exclude_from_default (ci_container)
-  else ()
-    message (STATUS "docker NOT found -- won't be able to build containers for packaging")
-  endif ()
-endif ()

Builds/CMake/RippledSettings.cmake

@@ -1,124 +0,0 @@
-#[===================================================================[
-   declare user options/settings
-#]===================================================================]
-
-option (assert "Enables asserts, even in release builds" OFF)
-
-option (reporting "Build rippled with reporting mode enabled" OFF)
-
-option (tests "Build tests" ON)
-
-option (unity "Creates a build using UNITY support in cmake. This is the default" ON)
-if (unity)
-  if (NOT is_ci)
-    set (CMAKE_UNITY_BUILD_BATCH_SIZE 15 CACHE STRING "")
-  endif ()
-endif ()
-if (is_gcc OR is_clang)
-  option (coverage "Generates coverage info." OFF)
-  option (profile "Add profiling flags" OFF)
-  set (coverage_test "" CACHE STRING
-    "On gcc & clang, the specific unit test(s) to run for coverage. Default is all tests.")
-  if (coverage_test AND NOT coverage)
-    set (coverage ON CACHE BOOL "gcc/clang only" FORCE)
-  endif ()
-  option (coverage_core_only
-    "Include only src/ripple files when generating coverage report. \
-    Set to OFF to include all sources in coverage report."
-    ON)
-  option (wextra "compile with extra gcc/clang warnings enabled" ON)
-else ()
-  set (profile OFF CACHE BOOL "gcc/clang only" FORCE)
-  set (coverage OFF CACHE BOOL "gcc/clang only" FORCE)
-  set (wextra OFF CACHE BOOL "gcc/clang only" FORCE)
-endif ()
-if (is_linux)
-  option (BUILD_SHARED_LIBS "build shared ripple libraries" OFF)
-  option (static "link protobuf, openssl, libc++, and boost statically" ON)
-  option (perf "Enables flags that assist with perf recording" OFF)
-  option (use_gold "enables detection of gold (binutils) linker" ON)
-  option (use_mold "enables detection of mold (binutils) linker" ON)
-else ()
-  # we are not ready to allow shared-libs on windows because it would require
-  # export declarations. On macos it's more feasible, but static openssl
-  # produces odd linker errors, thus we disable shared lib builds for now.
-  set (BUILD_SHARED_LIBS OFF CACHE BOOL "build shared ripple libraries - OFF for win/macos" FORCE)
-  set (static ON CACHE BOOL "static link, linux only. ON for WIN/macos" FORCE)
-  set (perf OFF CACHE BOOL "perf flags, linux only" FORCE)
-  set (use_gold OFF CACHE BOOL "gold linker, linux only" FORCE)
-  set (use_mold OFF CACHE BOOL "mold linker, linux only" FORCE)
-endif ()
-if (is_clang)
-  option (use_lld "enables detection of lld linker" ON)
-else ()
-  set (use_lld OFF CACHE BOOL "try lld linker, clang only" FORCE)
-endif ()
-option (jemalloc "Enables jemalloc for heap profiling" OFF)
-option (werr "treat warnings as errors" OFF)
-option (local_protobuf
-  "Force a local build of protobuf instead of looking for an installed version." OFF)
-option (local_grpc
-  "Force a local build of gRPC instead of looking for an installed version." OFF)
-
-# this one is a string and therefore can't be an option
-set (san "" CACHE STRING "On gcc & clang, add sanitizer instrumentation")
-set_property (CACHE san PROPERTY STRINGS ";undefined;memory;address;thread")
-if (san)
-  string (TOLOWER ${san} san)
-  set (SAN_FLAG "-fsanitize=${san}")
-  set (SAN_LIB "")
-  if (is_gcc)
-    if (san STREQUAL "address")
-      set (SAN_LIB "asan")
-    elseif (san STREQUAL "thread")
-      set (SAN_LIB "tsan")
-    elseif (san STREQUAL "memory")
-      set (SAN_LIB "msan")
-    elseif (san STREQUAL "undefined")
-      set (SAN_LIB "ubsan")
-    endif ()
-  endif ()
-  set (_saved_CRL ${CMAKE_REQUIRED_LIBRARIES})
-  set (CMAKE_REQUIRED_LIBRARIES "${SAN_FLAG};${SAN_LIB}")
-  check_cxx_compiler_flag (${SAN_FLAG} COMPILER_SUPPORTS_SAN)
-  set (CMAKE_REQUIRED_LIBRARIES ${_saved_CRL})
-  if (NOT COMPILER_SUPPORTS_SAN)
-    message (FATAL_ERROR "${san} sanitizer does not seem to be supported by your compiler")
-  endif ()
-endif ()
-set (container_label "" CACHE STRING "tag to use for package building containers")
-option (packages_only
-  "ONLY generate package building targets. This is special use-case and almost \
-   certainly not what you want. Use with caution as you won't be able to build \
-   any compiled targets locally." OFF)
-option (have_package_container
-  "Sometimes you already have the tagged container you want to use for package \
-   building and you don't want docker to rebuild it. This flag will detach the \
-   dependency of the package build from the container build. It's an advanced \
-   use case and most likely you should not be touching this flag." OFF)
-
-# the remaining options are obscure and rarely used
-option (beast_no_unit_test_inline
-  "Prevents unit test definitions from being inserted into global table"
-  OFF)
-option (single_io_service_thread
-  "Restricts the number of threads calling io_service::run to one. \
-  This can be useful when debugging."
-  OFF)
-option (boost_show_deprecated
-  "Allow boost to fail on deprecated usage. Only useful if you're trying\
-  to find deprecated calls."
-  OFF)
-option (beast_hashers
-  "Use local implementations for sha/ripemd hashes (experimental, not recommended)"
-  OFF)
-
-if (WIN32)
-  option (beast_disable_autolink "Disables autolinking of system libraries on WIN32" OFF)
-else ()
-  set (beast_disable_autolink OFF CACHE BOOL "WIN32 only" FORCE)
-endif ()
-if (coverage)
-  message (STATUS "coverage build requested - forcing Debug build")
-  set (CMAKE_BUILD_TYPE Debug CACHE STRING "build type" FORCE)
-endif ()

Builds/CMake/RippledValidatorKeys.cmake

@@ -1,22 +0,0 @@
-option (validator_keys "Enables building of validator-keys-tool as a separate target (imported via FetchContent)" OFF)
-
-if (validator_keys)
-  git_branch (current_branch)
-  # default to tracking VK develop branch unless we are on master/release
-  if (NOT (current_branch STREQUAL "master" OR current_branch STREQUAL "release"))
-    set (current_branch "develop")
-  endif ()
-  message (STATUS "tracking ValidatorKeys branch: ${current_branch}")
-
-  FetchContent_Declare (
-    validator_keys_src
-    GIT_REPOSITORY https://github.com/ripple/validator-keys-tool.git
-    GIT_TAG        "${current_branch}"
-  )
-  FetchContent_GetProperties (validator_keys_src)
-  if (NOT validator_keys_src_POPULATED)
-    message (STATUS "Pausing to download ValidatorKeys...")
-    FetchContent_Populate (validator_keys_src)
-  endif ()
-  add_subdirectory (${validator_keys_src_SOURCE_DIR} ${CMAKE_BINARY_DIR}/validator-keys)
-endif ()

Builds/CMake/RippledVersion.cmake

@@ -1,15 +0,0 @@
-#[===================================================================[
-   read version from source
-#]===================================================================]
-
-file (STRINGS src/ripple/protocol/impl/BuildInfo.cpp BUILD_INFO)
-foreach (line_ ${BUILD_INFO})
-  if (line_ MATCHES "versionString[ ]*=[ ]*\"(.+)\"")
-    set (rippled_version ${CMAKE_MATCH_1})
-  endif ()
-endforeach ()
-if (rippled_version)
-  message (STATUS "rippled version: ${rippled_version}")
-else ()
-  message (FATAL_ERROR "unable to determine rippled version")
-endif ()

Builds/CMake/SociConfig.cmake.patched

@@ -1,106 +0,0 @@
-################################################################################
-# SociConfig.cmake - CMake build configuration of SOCI library
-################################################################################
-# Copyright (C) 2010 Mateusz Loskot <mateusz@loskot.net>
-#
-# Distributed under the Boost Software License, Version 1.0.
-# (See accompanying file LICENSE_1_0.txt or copy at
-# http://www.boost.org/LICENSE_1_0.txt)
-################################################################################
-
-include(CheckCXXSymbolExists)
-
-if(WIN32)
-  check_cxx_symbol_exists("_M_AMD64" "" SOCI_TARGET_ARCH_X64)
-  if(NOT RTC_ARCH_X64)
-    check_cxx_symbol_exists("_M_IX86" "" SOCI_TARGET_ARCH_X86)
-  endif(NOT RTC_ARCH_X64)
-  # add check for arm here
-  # see http://msdn.microsoft.com/en-us/library/b0084kay.aspx
-else(WIN32)
-  check_cxx_symbol_exists("__i386__" "" SOCI_TARGET_ARCH_X86)
-  check_cxx_symbol_exists("__x86_64__" "" SOCI_TARGET_ARCH_X64)
-  check_cxx_symbol_exists("__arm__" "" SOCI_TARGET_ARCH_ARM)
-endif(WIN32)
-
-if(NOT DEFINED LIB_SUFFIX)
-  if(SOCI_TARGET_ARCH_X64)
-    set(_lib_suffix "64")
-  else()
-    set(_lib_suffix "")
-  endif()
-  set(LIB_SUFFIX ${_lib_suffix} CACHE STRING "Specifies suffix for the lib directory")
-endif()
-
-#
-# C++11 Option
-#
-
-if(NOT SOCI_CXX_C11)
-  set (SOCI_CXX_C11 OFF CACHE BOOL "Build to the C++11 standard")
-endif()
-
-#
-# Force compilation flags and set desired warnings level
-#
-
-if (MSVC)
-  add_definitions(-D_CRT_SECURE_NO_DEPRECATE)
-  add_definitions(-D_CRT_SECURE_NO_WARNINGS)
-  add_definitions(-D_CRT_NONSTDC_NO_WARNING)
-  add_definitions(-D_SCL_SECURE_NO_WARNINGS)
-
-  if(CMAKE_CXX_FLAGS MATCHES "/W[0-4]")
-    string(REGEX REPLACE "/W[0-4]" "/W4" CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}")
-  else()
-    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /W4 /we4266")
-  endif()
-
-else()
-
-  set(SOCI_GCC_CLANG_COMMON_FLAGS "")
-    # "-pedantic -Werror -Wno-error=parentheses -Wall -Wextra -Wpointer-arith -Wcast-align -Wcast-qual -Wfloat-equal -Woverloaded-virtual -Wredundant-decls -Wno-long-long")
-
-
-  if (SOCI_CXX_C11)
-    set(SOCI_CXX_VERSION_FLAGS "-std=c++11")
-  else()
-    set(SOCI_CXX_VERSION_FLAGS "-std=gnu++98")
-  endif()
-
-  if("${CMAKE_CXX_COMPILER_ID}" MATCHES "Clang" OR "${CMAKE_CXX_COMPILER}" MATCHES "clang")
-
-    if(NOT CMAKE_CXX_COMPILER_VERSION LESS 3.1 AND SOCI_ASAN)
-      set(SOCI_GCC_CLANG_COMMON_FLAGS "${SOCI_GCC_CLANG_COMMON_FLAGS} -fsanitize=address")
-    endif()
-
-    # enforce C++11 for Clang
-    set(SOCI_CXX_C11 ON)
-    set(SOCI_CXX_VERSION_FLAGS "-std=c++11")
-    add_definitions(-DCATCH_CONFIG_CPP11_NO_IS_ENUM)
-
-    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${SOCI_GCC_CLANG_COMMON_FLAGS} ${SOCI_CXX_VERSION_FLAGS}")
-
-  elseif(CMAKE_COMPILER_IS_GNUCC OR CMAKE_COMPILER_IS_GNUCXX)
-
-    if(NOT CMAKE_CXX_COMPILER_VERSION LESS 4.8 AND SOCI_ASAN)
-      set(SOCI_GCC_CLANG_COMMON_FLAGS "${SOCI_GCC_CLANG_COMMON_FLAGS} -fsanitize=address")
-    endif()
-
-    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${SOCI_GCC_CLANG_COMMON_FLAGS} ${SOCI_CXX_VERSION_FLAGS} ")
-    if (CMAKE_COMPILER_IS_GNUCXX)
-        if (CMAKE_SYSTEM_NAME MATCHES "FreeBSD")
-            set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}")
-        else()
-            set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-variadic-macros")
-        endif()
-    endif()
-
-  else()
-	message(WARNING "Unknown toolset - using default flags to build SOCI")
-  endif()
-
-endif()
-
-# Set SOCI_HAVE_* variables for soci-config.h generator
-set(SOCI_HAVE_CXX_C11 ${SOCI_CXX_C11} CACHE INTERNAL "Enables C++11 support")

Builds/CMake/deps/Protobuf.cmake

@@ -1,27 +0,0 @@
-find_package(Protobuf 3.8)
-
-set(output_dir ${CMAKE_BINARY_DIR}/proto_gen)
-file(MAKE_DIRECTORY ${output_dir})
-set(ccbd ${CMAKE_CURRENT_BINARY_DIR})
-set(CMAKE_CURRENT_BINARY_DIR ${output_dir})
-protobuf_generate_cpp(PROTO_SRCS PROTO_HDRS src/ripple/proto/ripple.proto)
-set(CMAKE_CURRENT_BINARY_DIR ${ccbd})
-
-target_include_directories(xrpl_core SYSTEM PUBLIC
-    # The generated implementation imports the header relative to the output
-    # directory.
-    $<BUILD_INTERFACE:${output_dir}>
-    $<BUILD_INTERFACE:${output_dir}/src>
-)
-target_sources(xrpl_core PRIVATE ${output_dir}/src/ripple/proto/ripple.pb.cc)
-install(
-  FILES ${output_dir}/src/ripple/proto/ripple.pb.h
-  DESTINATION include/ripple/proto)
-target_link_libraries(xrpl_core PUBLIC protobuf::libprotobuf)
-target_compile_options(xrpl_core
-  PUBLIC
-    $<$<BOOL:${XCODE}>:
-      --system-header-prefix="google/protobuf"
-      -Wno-deprecated-dynamic-exception-spec
-    >
-)

Builds/CMake/deps/gRPC.cmake

@@ -1,82 +0,0 @@
-find_package(gRPC 1.23)
-
-#[=================================[
-   generate protobuf sources for
-   grpc defs and bundle into a
-   static lib
-#]=================================]
-set(output_dir "${CMAKE_BINARY_DIR}/proto_gen_grpc")
-set(GRPC_GEN_DIR "${output_dir}/ripple/proto")
-file(MAKE_DIRECTORY ${GRPC_GEN_DIR})
-set(GRPC_PROTO_SRCS)
-set(GRPC_PROTO_HDRS)
-set(GRPC_PROTO_ROOT "${CMAKE_CURRENT_SOURCE_DIR}/src/ripple/proto/org")
-file(GLOB_RECURSE GRPC_DEFINITION_FILES "${GRPC_PROTO_ROOT}/*.proto")
-foreach(file ${GRPC_DEFINITION_FILES})
-  # /home/user/rippled/src/ripple/proto/org/.../v1/get_ledger.proto
-  get_filename_component(_abs_file ${file} ABSOLUTE)
-  # /home/user/rippled/src/ripple/proto/org/.../v1
-  get_filename_component(_abs_dir ${_abs_file} DIRECTORY)
-  # get_ledger
-  get_filename_component(_basename ${file} NAME_WE)
-  # /home/user/rippled/src/ripple/proto
-  get_filename_component(_proto_inc ${GRPC_PROTO_ROOT} DIRECTORY) # updir one level
-  # org/.../v1/get_ledger.proto
-  file(RELATIVE_PATH _rel_root_file ${_proto_inc} ${_abs_file})
-  # org/.../v1
-  get_filename_component(_rel_root_dir ${_rel_root_file} DIRECTORY)
-  # src/ripple/proto/org/.../v1
-  file(RELATIVE_PATH _rel_dir ${CMAKE_CURRENT_SOURCE_DIR} ${_abs_dir})
-
-  # .cmake/proto_gen_grpc/ripple/proto/org/.../v1/get_ledger.grpc.pb.cc
-  set(src_1 "${GRPC_GEN_DIR}/${_rel_root_dir}/${_basename}.grpc.pb.cc")
-  set(src_2 "${GRPC_GEN_DIR}/${_rel_root_dir}/${_basename}.pb.cc")
-  set(hdr_1 "${GRPC_GEN_DIR}/${_rel_root_dir}/${_basename}.grpc.pb.h")
-  set(hdr_2 "${GRPC_GEN_DIR}/${_rel_root_dir}/${_basename}.pb.h")
-  add_custom_command(
-    OUTPUT ${src_1} ${src_2} ${hdr_1} ${hdr_2}
-    COMMAND protobuf::protoc
-    ARGS --grpc_out=${GRPC_GEN_DIR}
-         --cpp_out=${GRPC_GEN_DIR}
-         --plugin=protoc-gen-grpc=$<TARGET_FILE:gRPC::grpc_cpp_plugin>
-         -I ${_proto_inc} -I ${_rel_dir}
-         ${_abs_file}
-    DEPENDS ${_abs_file} protobuf::protoc gRPC::grpc_cpp_plugin
-    WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
-    COMMENT "Running gRPC C++ protocol buffer compiler on ${file}"
-    VERBATIM)
-    set_source_files_properties(${src_1} ${src_2} ${hdr_1} ${hdr_2} PROPERTIES
-      GENERATED TRUE
-      SKIP_UNITY_BUILD_INCLUSION ON
-    )
-    list(APPEND GRPC_PROTO_SRCS ${src_1} ${src_2})
-    list(APPEND GRPC_PROTO_HDRS ${hdr_1} ${hdr_2})
-endforeach()
-
-target_include_directories(xrpl_core SYSTEM PUBLIC
-  $<BUILD_INTERFACE:${output_dir}>
-  $<BUILD_INTERFACE:${output_dir}/ripple/proto>
-  # The generated sources include headers relative to this path. Fix it later.
-  $<INSTALL_INTERFACE:include/ripple/proto>
-)
-target_sources(xrpl_core PRIVATE ${GRPC_PROTO_SRCS})
-install(
-  DIRECTORY ${output_dir}/ripple
-  DESTINATION include/
-  FILES_MATCHING PATTERN "*.h"
-)
-target_link_libraries(xrpl_core PUBLIC
-  "gRPC::grpc++"
-  # libgrpc is missing references.
-  absl::random_random
-)
-target_compile_options(xrpl_core
-  PRIVATE
-    $<$<BOOL:${MSVC}>:-wd4065>
-    $<$<NOT:$<BOOL:${MSVC}>>:-Wno-deprecated-declarations>
-  PUBLIC
-    $<$<BOOL:${MSVC}>:-wd4996>
-    $<$<BOOL:${XCODE}>:
-      --system-header-prefix="google/protobuf"
-      -Wno-deprecated-dynamic-exception-spec
-    >)

Builds/CMake/echo_file.cmake

@@ -1,17 +0,0 @@
-#[=========================================================[
-  This is a CMake script file that is used to write
-  the contents of a file to stdout (using the cmake
-  echo command). The input file is passed via the
-  IN_FILE variable.
-#]=========================================================]
-
-if (EXISTS ${IN_FILE})
-  file (READ ${IN_FILE} contents)
-  ## only print files that actually have some text in them
-  if (contents MATCHES "[a-z0-9A-Z]+")
-    execute_process(
-      COMMAND
-        ${CMAKE_COMMAND} -E echo "${contents}")
-  endif ()
-endif ()
-

Builds/README.md

@@ -1 +0,0 @@
-[Please see the BUILD instructions here](../BUILD.md)

Builds/Test.py

@@ -1,405 +0,0 @@
-#!/usr/bin/env python
-
-#    This file is part of rippled: https://github.com/ripple/rippled
-#    Copyright (c) 2012 - 2017 Ripple Labs Inc.
-#
-#    Permission to use, copy, modify, and/or distribute this software for any
-#    purpose  with  or without fee is hereby granted, provided that the above
-#    copyright notice and this permission notice appear in all copies.
-#
-#    THE  SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-#    WITH  REGARD  TO  THIS  SOFTWARE  INCLUDING  ALL  IMPLIED  WARRANTIES  OF
-#    MERCHANTABILITY  AND  FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-#    ANY  SPECIAL ,  DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-#    WHATSOEVER  RESULTING  FROM  LOSS  OF USE, DATA OR PROFITS, WHETHER IN AN
-#    ACTION  OF  CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-#    OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
-"""
-Invocation:
-
-    ./Builds/Test.py - builds and tests all configurations
-
-The build must succeed without shell aliases for this to work.
-
-To pass flags to cmake, put them at the very end of the command line, after
-the -- flag - like this:
-
-    ./Builds/Test.py -- -j4  # Pass -j4 to cmake --build
-
-
-Common problems:
-
-1) Boost not found. Solution: export BOOST_ROOT=[path to boost folder]
-
-2) OpenSSL not found. Solution: export OPENSSL_ROOT=[path to OpenSSL folder]
-
-3) cmake is not found. Solution: Be sure cmake directory is on your $PATH
-
-"""
-from __future__ import absolute_import, division, print_function, unicode_literals
-
-import argparse
-import itertools
-import os
-import platform
-import re
-import shutil
-import sys
-import subprocess
-
-
-def powerset(iterable):
-    """powerset([1,2,3]) --> () (1,) (2,) (3,) (1,2) (1,3) (2,3) (1,2,3)"""
-    s = list(iterable)
-    return itertools.chain.from_iterable(itertools.combinations(s, r) for r in range(len(s) + 1))
-
-IS_WINDOWS = platform.system().lower() == 'windows'
-IS_OS_X = platform.system().lower() == 'darwin'
-
-# CMake
-if IS_WINDOWS:
-    CMAKE_UNITY_CONFIGS = ['Debug', 'Release']
-    CMAKE_NONUNITY_CONFIGS = ['Debug', 'Release']
-else:
-    CMAKE_UNITY_CONFIGS = []
-    CMAKE_NONUNITY_CONFIGS = []
-CMAKE_UNITY_COMBOS = { '' : [['rippled'], CMAKE_UNITY_CONFIGS],
-    '.nounity' : [['rippled'], CMAKE_NONUNITY_CONFIGS] }
-
-if IS_WINDOWS:
-    CMAKE_DIR_TARGETS = { ('msvc' + unity,) : targets for unity, targets in
-        CMAKE_UNITY_COMBOS.items() }
-elif IS_OS_X:
-    CMAKE_DIR_TARGETS = { (build + unity,) : targets
-                   for build in ['debug', 'release']
-                   for unity, targets in CMAKE_UNITY_COMBOS.items() }
-else:
-    CMAKE_DIR_TARGETS = { (cc + "." + build + unity,) : targets
-                   for cc in ['gcc', 'clang']
-                   for build in ['debug', 'release', 'coverage', 'profile']
-                   for unity, targets in CMAKE_UNITY_COMBOS.items() }
-
-# list of tuples of all possible options
-if IS_WINDOWS or IS_OS_X:
-    CMAKE_ALL_GENERATE_OPTIONS = [tuple(x) for x in powerset(['-GNinja', '-Dassert=true'])]
-else:
-    CMAKE_ALL_GENERATE_OPTIONS = list(set(
-        [tuple(x) for x in powerset(['-GNinja', '-Dstatic=true', '-Dassert=true', '-Dsan=address'])] +
-        [tuple(x) for x in powerset(['-GNinja', '-Dstatic=true', '-Dassert=true', '-Dsan=thread'])]))
-
-parser = argparse.ArgumentParser(
-    description='Test.py - run ripple tests'
-)
-
-parser.add_argument(
-    '--all', '-a',
-    action='store_true',
-    help='Build all configurations.',
-)
-
-parser.add_argument(
-    '--keep_going', '-k',
-    action='store_true',
-    help='Keep going after one configuration has failed.',
-)
-
-parser.add_argument(
-    '--silent', '-s',
-    action='store_true',
-    help='Silence all messages except errors',
-)
-
-parser.add_argument(
-    '--verbose', '-v',
-    action='store_true',
-    help=('Report more information about which commands are executed and the '
-          'results.'),
-)
-
-parser.add_argument(
-    '--test', '-t',
-    default='',
-    help='Add a prefix for unit tests',
-)
-
-parser.add_argument(
-    '--testjobs',
-    default='0',
-    type=int,
-    help='Run tests in parallel'
-)
-
-parser.add_argument(
-    '--ipv6',
-    action='store_true',
-    help='Use IPv6 localhost when running unit tests.',
-)
-
-parser.add_argument(
-    '--clean', '-c',
-    action='store_true',
-    help='delete all build artifacts after testing',
-)
-
-parser.add_argument(
-    '--quiet', '-q',
-    action='store_true',
-    help='Reduce output where possible (unit tests)',
-)
-
-parser.add_argument(
-    '--dir', '-d',
-    default=(),
-    nargs='*',
-    help='Specify one or more CMake dir names. '
-        'Will also be used as -Dtarget=<dir> running cmake.'
-)
-
-parser.add_argument(
-    '--target',
-    default=(),
-    nargs='*',
-    help='Specify one or more CMake build targets. '
-        'Will be used as --target <target> running cmake --build.'
-    )
-
-parser.add_argument(
-    '--config',
-    default=(),
-    nargs='*',
-    help='Specify one or more CMake build configs. '
-        'Will be used as --config <config> running cmake --build.'
-    )
-
-parser.add_argument(
-    '--generator_option',
-    action='append',
-    help='Specify a CMake generator option. Repeat for multiple options. '
-        'Will be passed to the cmake generator. '
-        'Due to limits of the argument parser, arguments starting with \'-\' '
-        'must be attached to this option. e.g. --generator_option=-GNinja.')
-
-parser.add_argument(
-    '--build_option',
-    action='append',
-    help='Specify a build option. Repeat for multiple options. '
-        'Will be passed to the build tool via cmake --build. '
-        'Due to limits of the argument parser, arguments starting with \'-\' '
-        'must be attached to this option. e.g. --build_option=-j8.')
-
-parser.add_argument(
-    'extra_args',
-    default=(),
-    nargs='*',
-    help='Extra arguments are passed through to the tools'
-)
-
-ARGS = parser.parse_args()
-
-def decodeString(line):
-    # Python 2 vs. Python 3
-    if isinstance(line, str):
-        return line
-    else:
-        return line.decode()
-
-def shell(cmd, args=(), silent=False, cust_env=None):
-    """"Execute a shell command and return the output."""
-    silent = ARGS.silent or silent
-    verbose = not silent and ARGS.verbose
-    if verbose:
-        print('$' + cmd, *args)
-
-    command = (cmd,) + args
-
-    # shell is needed in Windows to find executable in the path
-    process = subprocess.Popen(
-        command,
-        stdin=subprocess.PIPE,
-        stdout=subprocess.PIPE,
-        stderr=subprocess.STDOUT,
-        env=cust_env,
-        shell=IS_WINDOWS)
-    lines = []
-    count = 0
-    # readline returns '' at EOF
-    for line in iter(process.stdout.readline, ''):
-        if process.poll() is None:
-            decoded = decodeString(line)
-            lines.append(decoded)
-            if verbose:
-                print(decoded, end='')
-            elif not silent:
-                count += 1
-                if count >= 80:
-                    print()
-                    count = 0
-                else:
-                    print('.', end='')
-        else:
-            break
-
-    if not verbose and count:
-        print()
-    process.wait()
-    return process.returncode, lines
-
-def get_cmake_dir(cmake_dir):
-    return os.path.join('build' , 'cmake' , cmake_dir)
-
-def run_cmake(directory, cmake_dir, args):
-    print('Generating build in', directory, 'with', *args or ('default options',))
-    old_dir = os.getcwd()
-    if not os.path.exists(directory):
-        os.makedirs(directory)
-    os.chdir(directory)
-    if IS_WINDOWS and not any(arg.startswith("-G") for arg in args) and not os.path.exists("CMakeCache.txt"):
-        if '--ninja' in args:
-            args += ( '-GNinja', )
-        else:
-            args += ( '-GVisual Studio 14 2015 Win64', )
-    # hack to extract cmake options/args from the legacy target format
-    if re.search('\.unity', cmake_dir):
-        args += ( '-Dunity=ON', )
-    if re.search('\.nounity', cmake_dir):
-        args += ( '-Dunity=OFF', )
-    if re.search('coverage', cmake_dir):
-        args += ( '-Dcoverage=ON', )
-    if re.search('profile', cmake_dir):
-        args += ( '-Dprofile=ON', )
-    if re.search('debug', cmake_dir):
-        args += ( '-DCMAKE_BUILD_TYPE=Debug', )
-    if re.search('release', cmake_dir):
-        args += ( '-DCMAKE_BUILD_TYPE=Release', )
-    m = re.search('gcc(-[^.]*)', cmake_dir)
-    if m:
-        args += ( '-DCMAKE_C_COMPILER=' + m.group(0),
-          '-DCMAKE_CXX_COMPILER=g++' + m.group(1), )
-    elif re.search('gcc', cmake_dir):
-        args += ( '-DCMAKE_C_COMPILER=gcc', '-DCMAKE_CXX_COMPILER=g++', )
-    m = re.search('clang(-[^.]*)', cmake_dir)
-    if m:
-        args += ( '-DCMAKE_C_COMPILER=' + m.group(0),
-          '-DCMAKE_CXX_COMPILER=clang++' + m.group(1), )
-    elif re.search('clang', cmake_dir):
-        args += ( '-DCMAKE_C_COMPILER=clang', '-DCMAKE_CXX_COMPILER=clang++', )
-
-    args += ( os.path.join('..', '..', '..'), )
-    resultcode, lines = shell('cmake', args)
-
-    if resultcode:
-        print('Generating FAILED:')
-        if not ARGS.verbose:
-            print(*lines, sep='')
-        sys.exit(1)
-
-    os.chdir(old_dir)
-
-def run_cmake_build(directory, target, config, args):
-    print('Building', target, config, 'in', directory, 'with', *args or ('default options',))
-    build_args=('--build', directory)
-    if target:
-      build_args += ('--target', target)
-    if config:
-      build_args += ('--config', config)
-    if args:
-        build_args += ('--',)
-        build_args += tuple(args)
-    resultcode, lines = shell('cmake', build_args)
-
-    if resultcode:
-        print('Build FAILED:')
-        if not ARGS.verbose:
-            print(*lines, sep='')
-        sys.exit(1)
-
-def run_cmake_tests(directory, target, config):
-    failed = []
-    if IS_WINDOWS:
-        target += '.exe'
-    executable = os.path.join(directory, config if config else 'Debug', target)
-    if(not os.path.exists(executable)):
-        executable = os.path.join(directory, target)
-    print('Unit tests for', executable)
-    testflag = '--unittest'
-    quiet = ''
-    testjobs = ''
-    ipv6 = ''
-    if ARGS.test:
-        testflag += ('=' + ARGS.test)
-    if ARGS.quiet:
-        quiet = '-q'
-    if ARGS.ipv6:
-        ipv6 = '--unittest-ipv6'
-    if ARGS.testjobs:
-        testjobs = ('--unittest-jobs=' + str(ARGS.testjobs))
-    resultcode, lines = shell(executable, (testflag, quiet, testjobs, ipv6))
-
-    if resultcode:
-        if not ARGS.verbose:
-            print('ERROR:', *lines, sep='')
-        failed.append([target, 'unittest'])
-
-    return failed
-
-def main():
-    all_failed = []
-    if ARGS.all:
-        build_dir_targets = CMAKE_DIR_TARGETS
-        generator_options = CMAKE_ALL_GENERATE_OPTIONS
-    else:
-        build_dir_targets = { tuple(ARGS.dir) : [ARGS.target, ARGS.config] }
-        if ARGS.generator_option:
-            generator_options = [tuple(ARGS.generator_option)]
-        else:
-            generator_options = [tuple()]
-
-    if not build_dir_targets:
-        # Let CMake choose the build tool.
-        build_dir_targets = { () : [] }
-
-    if ARGS.build_option:
-        ARGS.build_option = ARGS.build_option + list(ARGS.extra_args)
-    else:
-        ARGS.build_option = list(ARGS.extra_args)
-
-    for args in generator_options:
-        for build_dirs, (build_targets, build_configs) in build_dir_targets.items():
-            if not build_dirs:
-                build_dirs = ('default',)
-            if not build_targets:
-                build_targets = ('rippled',)
-            if not build_configs:
-                build_configs = ('',)
-            for cmake_dir in build_dirs:
-                cmake_full_dir = get_cmake_dir(cmake_dir)
-                run_cmake(cmake_full_dir, cmake_dir, args)
-
-                for target in build_targets:
-                    for config in build_configs:
-                        run_cmake_build(cmake_full_dir, target, config, ARGS.build_option)
-                        failed = run_cmake_tests(cmake_full_dir, target, config)
-
-                        if failed:
-                            print('FAILED:', *(':'.join(f) for f in failed))
-                            if not ARGS.keep_going:
-                                sys.exit(1)
-                            else:
-                                all_failed.extend([decodeString(cmake_dir +
-                                        "." + target + "." + config), ':'.join(f)]
-                                    for f in failed)
-                        else:
-                            print('Success')
-                if ARGS.clean:
-                    shutil.rmtree(cmake_full_dir)
-
-    if all_failed:
-        if len(all_failed) > 1:
-            print()
-            print('FAILED:', *(':'.join(f) for f in all_failed))
-        sys.exit(1)
-
-if __name__ == '__main__':
-    main()
-    sys.exit(0)

Builds/build_all.sh

@@ -1,7 +0,0 @@
-#!/usr/bin/env bash
-
-num_procs=$(lscpu -p | grep -v '^#' | sort -u -t, -k 2,4 | wc -l) # number of physical cores
-
-path=$(cd $(dirname $0) && pwd)
-cd $(dirname $path)
-${path}/Test.py -a -c --testjobs=${num_procs} -- -j${num_procs}

Builds/containers/README.md

@@ -1,31 +0,0 @@
-
-# rippled Packaging and Containers
-
-This folder contains docker container definitions and configuration
-files to support building rpm and deb packages of rippled. The container
-definitions include some additional software/packages that are used
-for general build/test CI workflows of rippled but are not explicitly
-needed for the package building workflow.
-
-## CMake Targets
-
-If you have docker installed on your local system, then the main 
-CMake file will enable several targets related to building packages:
-`rpm_container`, `rpm`, `dpkg_container`, and `dpkg`. The package targets
-depend on the container targets and will trigger a build of those first.
-The container builds can take several dozen minutes to complete (depending
-on hardware specs), so quick build cycles are not possible currently. As
-such, these targets are often best suited to CI/automated build systems.
-
-The package build can be invoked like any other cmake target from the 
-rippled root folder:
-```
-mkdir -p build/pkg && cd build/pkg
-cmake -Dpackages_only=ON ../..
-cmake --build . --target rpm
-```
-Upon successful completion, the generated package files will be in 
-the `build/pkg/packages` directory. For deb packages, simply replace
-`rpm` with `dpkg` in the build command above.
-
-

Builds/containers/centos-builder/Dockerfile

@@ -1,26 +0,0 @@
-FROM rippleci/centos:7
-ARG GIT_COMMIT=unknown
-ARG CI_USE=false
-
-LABEL git-commit=$GIT_COMMIT
-
-COPY centos-builder/centos_setup.sh /tmp/
-COPY shared/install_cmake.sh /tmp/
-RUN chmod +x /tmp/centos_setup.sh && \
-    chmod +x /tmp/install_cmake.sh
-RUN /tmp/centos_setup.sh
-
-RUN /tmp/install_cmake.sh 3.16.3 /opt/local/cmake-3.16
-RUN ln -s /opt/local/cmake-3.16 /opt/local/cmake
-ENV PATH="/opt/local/cmake/bin:$PATH"
-# TODO: Install latest CMake for testing
-RUN if [ "${CI_USE}" = true ] ; then /tmp/install_cmake.sh 3.16.3 /opt/local/cmake-3.16; fi
-
-RUN mkdir -m 777 -p /opt/rippled_bld/pkg
-
-WORKDIR /opt/rippled_bld/pkg
-RUN mkdir -m 777 ./rpmbuild
-RUN mkdir -m 777 ./rpmbuild/{BUILD,RPMS,SOURCES,SPECS,SRPMS}
-
-COPY packaging/rpm/build_rpm.sh ./
-CMD ./build_rpm.sh

Builds/containers/centos-builder/centos_setup.sh

@@ -1,22 +0,0 @@
-#!/usr/bin/env bash
-set -ex
-
-source /etc/os-release
-
-yum -y upgrade
-yum -y update
-yum -y install epel-release centos-release-scl
-yum -y install \
-    wget curl time gcc-c++ yum-utils autoconf automake pkgconfig libtool \
-    libstdc++-static rpm-build gnupg which make cmake \
-    devtoolset-11 devtoolset-11-gdb devtoolset-11-binutils devtoolset-11-libstdc++-devel \
-    devtoolset-11-libasan-devel devtoolset-11-libtsan-devel devtoolset-11-libubsan-devel devtoolset-11-liblsan-devel \
-    flex flex-devel bison bison-devel parallel \
-    ncurses ncurses-devel ncurses-libs graphviz graphviz-devel \
-    lzip p7zip bzip2 bzip2-devel lzma-sdk lzma-sdk-devel xz-devel \
-    zlib zlib-devel zlib-static texinfo openssl openssl-static \
-    jemalloc jemalloc-devel \
-    libicu-devel htop \
-    rh-python38 \
-    ninja-build git svn \
-    swig perl-Digest-MD5

Builds/containers/gitlab-ci/build_container.sh

@@ -1,28 +0,0 @@
-#!/usr/bin/env sh
-set -ex
-pkgtype=$1
-if [ "${pkgtype}" = "rpm" ] ; then
-    container_name="${RPM_CONTAINER_NAME}"
-elif [ "${pkgtype}" = "dpkg" ] ; then
-    container_name="${DPKG_CONTAINER_NAME}"
-else
-    echo "invalid package type"
-    exit 1
-fi
-
-if docker pull "${ARTIFACTORY_HUB}/${container_name}:latest_${CI_COMMIT_REF_SLUG}"; then
-    echo "found container for latest - using as cache."
-    docker tag \
-       "${ARTIFACTORY_HUB}/${container_name}:latest_${CI_COMMIT_REF_SLUG}" \
-       "${container_name}:latest_${CI_COMMIT_REF_SLUG}"
-    CMAKE_EXTRA="-D${pkgtype}_cache_from=${container_name}:latest_${CI_COMMIT_REF_SLUG}"
-fi
-
-cmake --version
-test -d build && rm -rf build
-mkdir -p build/container && cd build/container
-eval time \
-    cmake -Dpackages_only=ON -DCMAKE_VERBOSE_MAKEFILE=ON ${CMAKE_EXTRA} \
-    -G Ninja ../..
-time cmake --build . --target "${pkgtype}_container" -- -v
-

Builds/containers/gitlab-ci/build_package.sh

@@ -1,28 +0,0 @@
-#!/usr/bin/env sh
-set -ex
-pkgtype=$1
-if [ "${pkgtype}" = "rpm" ] ; then
-    container_name="${RPM_CONTAINER_FULLNAME}"
-    container_tag="${RPM_CONTAINER_TAG}"
-elif [ "${pkgtype}" = "dpkg" ] ; then
-    container_name="${DPKG_CONTAINER_FULLNAME}"
-    container_tag="${DPKG_CONTAINER_TAG}"
-else
-    echo "invalid package type"
-    exit 1
-fi
-time docker pull "${ARTIFACTORY_HUB}/${container_name}"
-docker tag \
-  "${ARTIFACTORY_HUB}/${container_name}" \
-  "${container_name}"
-docker images
-test -d build && rm -rf build
-mkdir -p build/${pkgtype} && cd build/${pkgtype}
-time cmake \
-  -Dpackages_only=ON \
-  -Dcontainer_label="${container_tag}" \
-  -Dhave_package_container=ON \
-  -DCMAKE_VERBOSE_MAKEFILE=ON \
-  -Dunity=OFF \
-  -G Ninja ../..
-time cmake --build . --target ${pkgtype} -- -v

Builds/containers/gitlab-ci/docker_alpine_setup.sh

@@ -1,15 +0,0 @@
-#!/usr/bin/env sh
-set -e
-# used as a before/setup script for docker steps in gitlab-ci
-# expects to be run in standard alpine/dind image
-echo $(nproc)
-docker login -u rippled \
-    -p ${ARTIFACTORY_DEPLOY_KEY_RIPPLED} ${ARTIFACTORY_HUB}
-apk add --update py-pip
-apk add \
-    bash util-linux coreutils binutils grep \
-    make ninja cmake build-base gcc g++ abuild git \
-    python3 python3-dev
-pip3 install awscli
-# list curdir contents to build log:
-ls -la

Builds/containers/gitlab-ci/get_component.sh

@@ -1,16 +0,0 @@
-#!/usr/bin/env sh
-case ${CI_COMMIT_REF_NAME} in
-    develop)
-        export COMPONENT="nightly"
-        ;;
-    release)
-        export COMPONENT="unstable"
-        ;;
-    master)
-        export COMPONENT="stable"
-        ;;
-    *)
-        export COMPONENT="_unknown_"
-        ;;
-esac
-

Builds/containers/gitlab-ci/pkgbuild.yml

@@ -1,771 +0,0 @@
-#########################################################################
-##                                                                     ##
-##  gitlab CI defintition for rippled build containers and distro      ##
-##  packages (rpm and dpkg).                                           ##
-##                                                                     ##
-#########################################################################
-
-# NOTE: these are sensible defaults for Ripple pipelines. These
-# can be overridden by project or group variables as needed.
-variables:
-  # these containers are built manually using the rippled
-  # cmake build (container targets) and tagged/pushed so they
-  # can be used here
-  RPM_CONTAINER_TAG: "2023-02-13"
-  RPM_CONTAINER_NAME: "rippled-rpm-builder"
-  RPM_CONTAINER_FULLNAME: "${RPM_CONTAINER_NAME}:${RPM_CONTAINER_TAG}"
-  DPKG_CONTAINER_TAG: "2023-07-31"
-  DPKG_CONTAINER_NAME: "rippled-dpkg-builder"
-  DPKG_CONTAINER_FULLNAME: "${DPKG_CONTAINER_NAME}:${DPKG_CONTAINER_TAG}"
-  ARTIFACTORY_HOST: "artifactory.ops.ripple.com"
-  ARTIFACTORY_HUB: "${ARTIFACTORY_HOST}:6555"
-  GIT_SIGN_PUBKEYS_URL: "https://gitlab.ops.ripple.com/xrpledger/rippled-packages/snippets/49/raw"
-  PUBLIC_REPO_ROOT: "https://repos.ripple.com/repos"
-  # also need to define this variable ONLY for the primary
-  # build/publish pipeline on the mainline repo:
-  #   IS_PRIMARY_REPO = "true"
-
-stages:
-  - build_packages
-  - sign_packages
-  - smoketest
-  - verify_sig
-  - tag_images
-  - push_to_test
-  - verify_from_test
-  - wait_approval_prod
-  - push_to_prod
-  - verify_from_prod
-  - get_final_hashes
-  - build_containers
-
-.dind_template: &dind_param
-  before_script:
-    - . ./Builds/containers/gitlab-ci/docker_alpine_setup.sh
-  variables:
-    docker_driver: overlay2
-    DOCKER_TLS_CERTDIR: ""
-  image:
-    name: artifactory.ops.ripple.com/docker:latest
-  services:
-    # workaround for TLS issues - consider going back
-    # back to unversioned `dind` when issues are resolved
-    - name: artifactory.ops.ripple.com/docker:stable-dind
-      alias: docker
-  tags:
-    - 4xlarge
-
-.only_primary_template: &only_primary
-  only:
-    refs:
-      - /^(master|release|develop)$/
-    variables:
-      - $IS_PRIMARY_REPO == "true"
-
-.smoketest_local_template: &run_local_smoketest
-  tags:
-    - xlarge
-  script:
-    - . ./Builds/containers/gitlab-ci/smoketest.sh local
-
-.smoketest_repo_template: &run_repo_smoketest
-  tags:
-    - xlarge
-  script:
-    - . ./Builds/containers/gitlab-ci/smoketest.sh repo
-
-#########################################################################
-##                                                                     ##
-##  stage: build_packages                                              ##
-##                                                                     ##
-##  build packages using containers from previous stage.               ##
-##                                                                     ##
-#########################################################################
-
-rpm_build:
-  timeout: "1h 30m"
-  stage: build_packages
-  <<: *dind_param
-  artifacts:
-    paths:
-      - build/rpm/packages/
-  script:
-    - . ./Builds/containers/gitlab-ci/build_package.sh rpm
-
-dpkg_build:
-  timeout: "1h 30m"
-  stage: build_packages
-  <<: *dind_param
-  artifacts:
-    paths:
-      - build/dpkg/packages/
-  script:
-    - . ./Builds/containers/gitlab-ci/build_package.sh dpkg
-
-#########################################################################
-##                                                                     ##
-##  stage: sign_packages                                               ##
-##                                                                     ##
-##  build packages using containers from previous stage.               ##
-##                                                                     ##
-#########################################################################
-
-rpm_sign:
-  stage: sign_packages
-  dependencies:
-    - rpm_build
-  image:
-    name: artifactory.ops.ripple.com/centos:7
-  <<: *only_primary
-  before_script:
-  - |
-    # Make sure GnuPG is installed
-    yum -y install gnupg rpm-sign
-    # checking GPG signing support
-    if [ -n "$GPG_KEY_B64" ]; then
-      echo "$GPG_KEY_B64"| base64 -d | gpg --batch --no-tty --allow-secret-key-import --import -
-      unset GPG_KEY_B64
-      export GPG_PASSPHRASE=$(echo $GPG_KEY_PASS_B64 | base64 -di)
-      unset GPG_KEY_PASS_B64
-      export GPG_KEYID=$(gpg --with-colon --list-secret-keys | head -n1 | cut -d : -f 5)
-    else
-      echo -e "\033[0;31m****** GPG signing disabled ******\033[0m"
-      exit 1
-    fi
-  artifacts:
-    paths:
-      - build/rpm/packages/
-  script:
-    - ls -alh build/rpm/packages
-    - . ./Builds/containers/gitlab-ci/sign_package.sh rpm
-
-dpkg_sign:
-  stage: sign_packages
-  dependencies:
-    - dpkg_build
-  image:
-    name: artifactory.ops.ripple.com/ubuntu:18.04
-  <<: *only_primary
-  before_script:
-  - |
-    # make sure we have GnuPG
-    apt update
-    apt install -y gpg dpkg-sig
-    # checking GPG signing support
-    if [ -n "$GPG_KEY_B64" ]; then
-      echo "$GPG_KEY_B64"| base64 -d | gpg --batch --no-tty --allow-secret-key-import --import -
-      unset GPG_KEY_B64
-      export GPG_PASSPHRASE=$(echo $GPG_KEY_PASS_B64 | base64 -di)
-      unset GPG_KEY_PASS_B64
-      export GPG_KEYID=$(gpg --with-colon --list-secret-keys | head -n1 | cut -d : -f 5)
-    else
-      echo -e "\033[0;31m****** GPG signing disabled ******\033[0m"
-      exit 1
-    fi
-  artifacts:
-    paths:
-      - build/dpkg/packages/
-  script:
-    - ls -alh build/dpkg/packages
-    - . ./Builds/containers/gitlab-ci/sign_package.sh dpkg
-
-#########################################################################
-##                                                                     ##
-##  stage: smoketest                                                   ##
-##                                                                     ##
-##  install unsigned packages from previous step and run unit tests.   ##
-##                                                                     ##
-#########################################################################
-
-centos_7_smoketest:
-  stage: smoketest
-  dependencies:
-    - rpm_build
-  image:
-    name: artifactory.ops.ripple.com/centos:7
-  <<: *run_local_smoketest
-
-rocky_8_smoketest:
-  stage: smoketest
-  dependencies:
-    - rpm_build
-  image:
-    name: artifactory.ops.ripple.com/rockylinux/rockylinux:8
-  <<: *run_local_smoketest
-
-rocky_9_smoketest:
-  stage: smoketest
-  dependencies:
-    - rpm_build
-  image:
-    name: artifactory.ops.ripple.com/rockylinux/rockylinux:9
-
-  <<: *run_local_smoketest
-
-alma_8_smoketest:
-  stage: smoketest
-  dependencies:
-    - rpm_build
-  image:
-    name: artifactory.ops.ripple.com/almalinux:8
-  <<: *run_local_smoketest
-
-alma_9_smoketest:
-  stage: smoketest
-  dependencies:
-    - rpm_build
-  image:
-    name: artifactory.ops.ripple.com/almalinux:9
-
-  <<: *run_local_smoketest
-
-fedora_38_smoketest:
-  stage: smoketest
-  dependencies:
-    - rpm_build
-  image:
-    name: artifactory.ops.ripple.com/fedora:38
-  <<: *run_local_smoketest
-
-fedora_39_smoketest:
-  stage: smoketest
-  dependencies:
-    - rpm_build
-  image:
-    name: artifactory.ops.ripple.com/fedora:39
-  <<: *run_local_smoketest
-
-ubuntu_18_smoketest:
-  stage: smoketest
-  dependencies:
-    - dpkg_build
-  image:
-    name: artifactory.ops.ripple.com/ubuntu:18.04
-  <<: *run_local_smoketest
-
-ubuntu_20_smoketest:
-  stage: smoketest
-  dependencies:
-    - dpkg_build
-  image:
-    name: artifactory.ops.ripple.com/ubuntu:20.04
-  <<: *run_local_smoketest
-
-ubuntu_22_smoketest:
-  stage: smoketest
-  dependencies:
-    - dpkg_build
-  image:
-    name: artifactory.ops.ripple.com/ubuntu:22.04
-  <<: *run_local_smoketest
-
-debian_10_smoketest:
-  stage: smoketest
-  dependencies:
-    - dpkg_build
-  image:
-    name: artifactory.ops.ripple.com/debian:10
-  <<: *run_local_smoketest
-
-debian_11_smoketest:
-  stage: smoketest
-  dependencies:
-    - dpkg_build
-  image:
-    name: artifactory.ops.ripple.com/debian:11
-  <<: *run_local_smoketest
-
-debian_12_smoketest:
-  stage: smoketest
-  dependencies:
-    - dpkg_build
-  image:
-    name: artifactory.ops.ripple.com/debian:12
-  <<: *run_local_smoketest
-
-#########################################################################
-##                                                                     ##
-##  stage: verify_sig                                                  ##
-##                                                                     ##
-##  use git/gpg to verify that HEAD is signed by an approved           ##
-##  committer. The whitelist of pubkeys is manually mantained          ##
-##  and fetched from GIT_SIGN_PUBKEYS_URL (currently a snippet         ##
-##  link).                                                             ##
-##  ONLY RUNS FOR PRIMARY BRANCHES/REPO                                ##
-##                                                                     ##
-#########################################################################
-
-verify_head_signed:
-  stage: verify_sig
-  image:
-    name: artifactory.ops.ripple.com/ubuntu:latest
-  <<: *only_primary
-  script:
-    - . ./Builds/containers/gitlab-ci/verify_head_commit.sh
-
-#########################################################################
-##                                                                     ##
-##  stage: tag_images                                                  ##
-##                                                                     ##
-##  apply rippled version tag to containers from previous stage.       ##
-##  ONLY RUNS FOR PRIMARY BRANCHES/REPO                                ##
-##                                                                     ##
-#########################################################################
-
-tag_bld_images:
-  stage: tag_images
-  variables:
-    docker_driver: overlay2
-    DOCKER_TLS_CERTDIR: ""
-  image:
-    name: artifactory.ops.ripple.com/docker:latest
-  services:
-    # workaround for TLS issues - consider going back
-    # back to unversioned `dind` when issues are resolved
-    - name: artifactory.ops.ripple.com/docker:stable-dind
-      alias: docker
-  tags:
-    - large
-  dependencies:
-    - rpm_sign
-    - dpkg_sign
-  <<: *only_primary
-  script:
-    - . ./Builds/containers/gitlab-ci/tag_docker_image.sh
-
-#########################################################################
-##                                                                     ##
-##  stage: push_to_test                                                ##
-##                                                                     ##
-##  push packages to artifactory repositories (test)                   ##
-##  ONLY RUNS FOR PRIMARY BRANCHES/REPO                                ##
-##                                                                     ##
-#########################################################################
-
-push_test:
-  stage: push_to_test
-  variables:
-    DEB_REPO: "rippled-deb-test-mirror"
-    RPM_REPO: "rippled-rpm-test-mirror"
-  image:
-    name: artifactory.ops.ripple.com/alpine:latest
-  artifacts:
-    paths:
-      - files.info
-  dependencies:
-    - rpm_sign
-    - dpkg_sign
-  <<: *only_primary
-  script:
-    - . ./Builds/containers/gitlab-ci/push_to_artifactory.sh "PUT" "."
-
-#########################################################################
-##                                                                     ##
-##  stage: verify_from_test                                            ##
-##                                                                     ##
-##  install/test packages from test repos.                             ##
-##  ONLY RUNS FOR PRIMARY BRANCHES/REPO                                ##
-##                                                                     ##
-#########################################################################
-
-centos_7_verify_repo_test:
-  stage: verify_from_test
-  variables:
-    RPM_REPO: "rippled-rpm-test-mirror"
-  image:
-    name: artifactory.ops.ripple.com/centos:7
-  dependencies:
-    - rpm_sign
-  <<: *only_primary
-  <<: *run_repo_smoketest
-
-rocky_8_verify_repo_test:
-  stage: verify_from_test
-  variables:
-    RPM_REPO: "rippled-rpm-test-mirror"
-  image:
-    name: artifactory.ops.ripple.com/rockylinux/rockylinux:8
-  dependencies:
-    - rpm_sign
-  <<: *only_primary
-  <<: *run_repo_smoketest
-
-rocky_9_verify_repo_test:
-  stage: verify_from_test
-  variables:
-    RPM_REPO: "rippled-rpm-test-mirror"
-  image:
-    name: artifactory.ops.ripple.com/rockylinux/rockylinux:9
-  dependencies:
-    - rpm_sign
-  <<: *only_primary
-  <<: *run_repo_smoketest
-
-almalinux_8_verify_repo_test:
-  stage: verify_from_test
-  variables:
-    RPM_REPO: "rippled-rpm-test-mirror"
-  image:
-    name: artifactory.ops.ripple.com/almalinux:8
-  dependencies:
-    - rpm_sign
-  <<: *only_primary
-  <<: *run_repo_smoketest
-
-almalinux_9_verify_repo_test:
-  stage: verify_from_test
-  variables:
-    RPM_REPO: "rippled-rpm-test-mirror"
-  image:
-    name: artifactory.ops.ripple.com/almalinux:9
-  dependencies:
-    - rpm_sign
-  <<: *only_primary
-  <<: *run_repo_smoketest
-
-fedora_38_verify_repo_test:
-  stage: verify_from_test
-  variables:
-    RPM_REPO: "rippled-rpm-test-mirror"
-  image:
-    name: artifactory.ops.ripple.com/fedora:38
-  dependencies:
-    - rpm_sign
-  <<: *only_primary
-  <<: *run_repo_smoketest
-
-fedora_39_verify_repo_test:
-  stage: verify_from_test
-  variables:
-    RPM_REPO: "rippled-rpm-test-mirror"
-  image:
-    name: artifactory.ops.ripple.com/fedora:39
-
-  dependencies:
-    - rpm_sign
-  <<: *only_primary
-  <<: *run_repo_smoketest
-
-ubuntu_18_verify_repo_test:
-  stage: verify_from_test
-  variables:
-    DISTRO: "bionic"
-    DEB_REPO: "rippled-deb-test-mirror"
-  image:
-    name: artifactory.ops.ripple.com/ubuntu:18.04
-  dependencies:
-    - dpkg_sign
-  <<: *only_primary
-  <<: *run_repo_smoketest
-
-ubuntu_20_verify_repo_test:
-  stage: verify_from_test
-  variables:
-    DISTRO: "focal"
-    DEB_REPO: "rippled-deb-test-mirror"
-  image:
-    name: artifactory.ops.ripple.com/ubuntu:20.04
-  dependencies:
-    - dpkg_sign
-  <<: *only_primary
-  <<: *run_repo_smoketest
-
-ubuntu_22_verify_repo_test:
-  stage: verify_from_test
-  variables:
-    DISTRO: "jammy"
-    DEB_REPO: "rippled-deb-test-mirror"
-  image:
-    name: artifactory.ops.ripple.com/ubuntu:22.04
-  dependencies:
-    - dpkg_sign
-  <<: *only_primary
-  <<: *run_repo_smoketest
-
-debian_10_verify_repo_test:
-  stage: verify_from_test
-  variables:
-    DISTRO: "buster"
-    DEB_REPO: "rippled-deb-test-mirror"
-  image:
-    name: artifactory.ops.ripple.com/debian:10
-  dependencies:
-    - dpkg_sign
-  <<: *only_primary
-  <<: *run_repo_smoketest
-
-debian_11_verify_repo_test:
-  stage: verify_from_test
-  variables:
-    DISTRO: "bullseye"
-    DEB_REPO: "rippled-deb-test-mirror"
-  image:
-    name: artifactory.ops.ripple.com/debian:11
-  dependencies:
-    - dpkg_sign
-  <<: *only_primary
-  <<: *run_repo_smoketest
-
-debian_12_verify_repo_test:
-  stage: verify_from_test
-  variables:
-    DISTRO: "bookworm"
-    DEB_REPO: "rippled-deb-test-mirror"
-  image:
-    name: artifactory.ops.ripple.com/debian:12
-  dependencies:
-    - dpkg_sign
-  <<: *only_primary
-  <<: *run_repo_smoketest
-
-#########################################################################
-##                                                                     ##
-##  stage: wait_approval_prod                                          ##
-##                                                                     ##
-##  wait for manual approval before proceeding to next stage           ##
-##  which pushes to prod repo.                                         ##
-##  ONLY RUNS FOR PRIMARY BRANCHES/REPO                                ##
-##                                                                     ##
-#########################################################################
-wait_before_push_prod:
-  stage: wait_approval_prod
-  image:
-    name: artifactory.ops.ripple.com/alpine:latest
-  <<: *only_primary
-  script:
-    - echo "proceeding to next stage"
-  when: manual
-  allow_failure: false
-
-#########################################################################
-##                                                                     ##
-##  stage: push_to_prod                                                ##
-##                                                                     ##
-##  push packages to artifactory repositories (prod)                   ##
-##  ONLY RUNS FOR PRIMARY BRANCHES/REPO                                ##
-##                                                                     ##
-#########################################################################
-
-push_prod:
-  variables:
-    DEB_REPO: "rippled-deb"
-    RPM_REPO: "rippled-rpm"
-  image:
-    name: artifactory.ops.ripple.com/alpine:latest
-  stage: push_to_prod
-  artifacts:
-    paths:
-      - files.info
-  dependencies:
-    - rpm_sign
-    - dpkg_sign
-  <<: *only_primary
-  script:
-    - . ./Builds/containers/gitlab-ci/push_to_artifactory.sh "PUT" "."
-
-#########################################################################
-##                                                                     ##
-##  stage: verify_from_prod                                            ##
-##                                                                     ##
-##  install/test packages from prod repos.                             ##
-##  ONLY RUNS FOR PRIMARY BRANCHES/REPO                                ##
-##                                                                     ##
-#########################################################################
-
-centos_7_verify_repo_prod:
-  stage: verify_from_prod
-  variables:
-    RPM_REPO: "rippled-rpm"
-  image:
-    name: artifactory.ops.ripple.com/centos:7
-  dependencies:
-    - rpm_sign
-  <<: *only_primary
-  <<: *run_repo_smoketest
-
-rocky_8_verify_repo_prod:
-  stage: verify_from_prod
-  variables:
-    RPM_REPO: "rippled-rpm"
-  image:
-    name: artifactory.ops.ripple.com/rockylinux/rockylinux:8
-  dependencies:
-    - rpm_sign
-  <<: *only_primary
-  <<: *run_repo_smoketest
-
-rocky_9_verify_repo_prod:
-  stage: verify_from_prod
-  variables:
-    RPM_REPO: "rippled-rpm"
-  image:
-    name: artifactory.ops.ripple.com/rockylinux/rockylinux:9
-  dependencies:
-    - rpm_sign
-  <<: *only_primary
-  <<: *run_repo_smoketest
-
-alma_8_verify_repo_prod:
-  stage: verify_from_prod
-  variables:
-    RPM_REPO: "rippled-rpm"
-  image:
-    name: artifactory.ops.ripple.com/almalinux:8
-  dependencies:
-    - rpm_sign
-  <<: *only_primary
-  <<: *run_repo_smoketest
-
-alma_9_verify_repo_prod:
-  stage: verify_from_prod
-  variables:
-    RPM_REPO: "rippled-rpm"
-  image:
-    name: artifactory.ops.ripple.com/almalinux:9
-  dependencies:
-    - rpm_sign
-  <<: *only_primary
-  <<: *run_repo_smoketest
-
-fedora_37_verify_repo_prod:
-  stage: verify_from_prod
-  variables:
-    RPM_REPO: "rippled-rpm"
-  image:
-    name: artifactory.ops.ripple.com/fedora:37
-  dependencies:
-    - rpm_sign
-  <<: *only_primary
-  <<: *run_repo_smoketest
-
-fedora_38_verify_repo_prod:
-  stage: verify_from_prod
-  variables:
-    RPM_REPO: "rippled-rpm"
-  image:
-    name: artifactory.ops.ripple.com/fedora:38
-  dependencies:
-    - rpm_sign
-  <<: *only_primary
-  <<: *run_repo_smoketest
-
-ubuntu_18_verify_repo_prod:
-  stage: verify_from_prod
-  variables:
-    DISTRO: "bionic"
-    DEB_REPO: "rippled-deb"
-  image:
-    name: artifactory.ops.ripple.com/ubuntu:18.04
-  dependencies:
-    - dpkg_sign
-  <<: *only_primary
-  <<: *run_repo_smoketest
-
-ubuntu_20_verify_repo_prod:
-  stage: verify_from_prod
-  variables:
-    DISTRO: "focal"
-    DEB_REPO: "rippled-deb"
-  image:
-    name: artifactory.ops.ripple.com/ubuntu:20.04
-  dependencies:
-    - dpkg_sign
-  <<: *only_primary
-  <<: *run_repo_smoketest
-
-ubuntu_22_verify_repo_prod:
-  stage: verify_from_prod
-  variables:
-    DISTRO: "jammy"
-    DEB_REPO: "rippled-deb"
-  image:
-    name: artifactory.ops.ripple.com/ubuntu:22.04
-  dependencies:
-    - dpkg_sign
-  <<: *only_primary
-  <<: *run_repo_smoketest
-
-debian_10_verify_repo_prod:
-  stage: verify_from_prod
-  variables:
-    DISTRO: "buster"
-    DEB_REPO: "rippled-deb"
-  image:
-    name: artifactory.ops.ripple.com/debian:10
-  dependencies:
-    - dpkg_sign
-  <<: *only_primary
-  <<: *run_repo_smoketest
-
-debian_11_verify_repo_prod:
-  stage: verify_from_prod
-  variables:
-    DISTRO: "bullseye"
-    DEB_REPO: "rippled-deb"
-  image:
-    name: artifactory.ops.ripple.com/debian:11
-  dependencies:
-    - dpkg_sign
-  <<: *only_primary
-  <<: *run_repo_smoketest
-
-debian_12_verify_repo_prod:
-  stage: verify_from_prod
-  variables:
-    DISTRO: "bookworm"
-    DEB_REPO: "rippled-deb"
-  image:
-    name: artifactory.ops.ripple.com/debian:12
-  dependencies:
-    - dpkg_sign
-  <<: *only_primary
-  <<: *run_repo_smoketest
-
-
-#########################################################################
-##                                                                     ##
-##  stage: get_final_hashes                                            ##
-##                                                                     ##
-##  fetch final hashes from artifactory.                               ##
-##  ONLY RUNS FOR PRIMARY BRANCHES/REPO                                ##
-##                                                                     ##
-#########################################################################
-
-get_prod_hashes:
-  variables:
-    DEB_REPO: "rippled-deb"
-    RPM_REPO: "rippled-rpm"
-  image:
-    name: artifactory.ops.ripple.com/alpine:latest
-  stage: get_final_hashes
-  artifacts:
-    paths:
-      - files.info
-  dependencies:
-    - rpm_sign
-    - dpkg_sign
-  <<: *only_primary
-  script:
-    - . ./Builds/containers/gitlab-ci/push_to_artifactory.sh "GET" ".checksums"
-
-#########################################################################
-##                                                                     ##
-##  stage: build_containers                                            ##
-##                                                                     ##
-##  build containers from docker definitions. These containers are NOT ##
-##  used for the package build. This step is only used to ensure that  ##
-##  the package build targets and files are still working properly.    ##
-##                                                                     ##
-#########################################################################
-
-build_centos_container:
-  stage: build_containers
-  <<: *dind_param
-  script:
-    - . ./Builds/containers/gitlab-ci/build_container.sh rpm
-
-build_ubuntu_container:
-  stage: build_containers
-  <<: *dind_param
-  script:
-    - . ./Builds/containers/gitlab-ci/build_container.sh dpkg

Builds/containers/gitlab-ci/push_to_artifactory.sh

@@ -1,92 +0,0 @@
-#!/usr/bin/env sh
-set -e
-action=$1
-filter=$2
-
-. ./Builds/containers/gitlab-ci/get_component.sh
-
-apk add curl jq coreutils util-linux
-TOPDIR=$(pwd)
-
-# DPKG
-
-cd $TOPDIR
-cd build/dpkg/packages
-CURLARGS="-sk -X${action} -urippled:${ARTIFACTORY_DEPLOY_KEY_RIPPLED}"
-RIPPLED_PKG=$(ls rippled_*.deb)
-RIPPLED_REPORTING_PKG=$(ls rippled-reporting_*.deb)
-RIPPLED_DBG_PKG=$(ls rippled-dbgsym_*.*deb)
-RIPPLED_REPORTING_DBG_PKG=$(ls rippled-reporting-dbgsym_*.*deb)
-# TODO - where to upload src tgz?
-RIPPLED_SRC=$(ls rippled_*.orig.tar.gz)
-DEB_MATRIX=";deb.component=${COMPONENT};deb.architecture=amd64"
-for dist in bookworm buster bullseye bionic focal jammy; do
-    DEB_MATRIX="${DEB_MATRIX};deb.distribution=${dist}"
-done
-echo "{ \"debs\": {" > "${TOPDIR}/files.info"
-for deb in ${RIPPLED_PKG} ${RIPPLED_DBG_PKG} ${RIPPLED_REPORTING_PKG} ${RIPPLED_REPORTING_DBG_PKG}; do
-    # first item doesn't get a comma separator
-    if [ $deb != $RIPPLED_PKG ] ; then
-        echo "," >> "${TOPDIR}/files.info"
-    fi
-    echo "\"${deb}\"": | tee -a "${TOPDIR}/files.info"
-    ca="${CURLARGS}"
-    if [ "${action}" = "PUT" ] ; then
-        url="https://${ARTIFACTORY_HOST}/artifactory/${DEB_REPO}/pool/${COMPONENT}/${deb}${DEB_MATRIX}"
-        ca="${ca} -T${deb}"
-    elif [ "${action}" = "GET" ] ; then
-        url="https://${ARTIFACTORY_HOST}/artifactory/api/storage/${DEB_REPO}/pool/${COMPONENT}/${deb}"
-    fi
-    echo "file info request url --> ${url}"
-    eval "curl ${ca} \"${url}\"" | jq -M "${filter}" | tee -a "${TOPDIR}/files.info"
-done
-echo "}," >> "${TOPDIR}/files.info"
-
-# RPM
-
-cd $TOPDIR
-cd build/rpm/packages
-RIPPLED_PKG=$(ls rippled-[0-9]*.x86_64.rpm)
-RIPPLED_DEV_PKG=$(ls rippled-devel*.rpm)
-RIPPLED_DBG_PKG=$(ls rippled-debuginfo*.rpm)
-RIPPLED_REPORTING_PKG=$(ls rippled-reporting*.rpm)
-# TODO - where to upload src rpm ?
-RIPPLED_SRC=$(ls rippled-[0-9]*.src.rpm)
-echo "\"rpms\": {" >> "${TOPDIR}/files.info"
-for rpm in ${RIPPLED_PKG} ${RIPPLED_DEV_PKG} ${RIPPLED_DBG_PKG} ${RIPPLED_REPORTING_PKG}; do
-    # first item doesn't get a comma separator
-    if [ $rpm != $RIPPLED_PKG ] ; then
-        echo "," >> "${TOPDIR}/files.info"
-    fi
-    echo "\"${rpm}\"": | tee -a "${TOPDIR}/files.info"
-    ca="${CURLARGS}"
-    if [ "${action}" = "PUT" ] ; then
-        url="https://${ARTIFACTORY_HOST}/artifactory/${RPM_REPO}/${COMPONENT}/"
-        ca="${ca} -T${rpm}"
-    elif [ "${action}" = "GET" ] ; then
-        url="https://${ARTIFACTORY_HOST}/artifactory/api/storage/${RPM_REPO}/${COMPONENT}/${rpm}"
-    fi
-    echo "file info request url --> ${url}"
-    eval "curl ${ca} \"${url}\"" | jq -M "${filter}" | tee -a "${TOPDIR}/files.info"
-done
-echo "}}" >> "${TOPDIR}/files.info"
-jq '.' "${TOPDIR}/files.info" > "${TOPDIR}/files.info.tmp"
-mv "${TOPDIR}/files.info.tmp" "${TOPDIR}/files.info"
-
-if [ ! -z "${SLACK_NOTIFY_URL}" ] && [ "${action}" = "GET" ] ; then
-    # extract files.info content to variable and sanitize so it can
-    # be interpolated into a slack text field below
-    finfo=$(cat ${TOPDIR}/files.info | sed -e ':a' -e 'N' -e '$!ba' -e 's/\n/\\n/g' | sed -E 's/"/\\"/g')
-    # try posting file info to slack.
-    # can add channel field to payload if the
-    # default channel is incorrect. Get rid of
-    # newlines in payload json since slack doesn't accept them
-    CONTENT=$(tr -d '[\n]' <<JSON
-       payload={
-         "username": "GitlabCI",
-         "text": "The package build for branch \`${CI_COMMIT_REF_NAME}\` is complete. File hashes are: \`\`\`${finfo}\`\`\`",
-         "icon_emoji": ":package:"}
-JSON
-)
-    curl ${SLACK_NOTIFY_URL} --data-urlencode "${CONTENT}"
-fi

Builds/containers/gitlab-ci/sign_package.sh

@@ -1,38 +0,0 @@
-#!/usr/bin/env bash
-
-set -eo pipefail
-
-sign_dpkg() {
-  if [ -n "${GPG_KEYID}" ]; then
-    dpkg-sig \
-      -g "--no-tty --digest-algo 'sha512' --passphrase '${GPG_PASSPHRASE}' --pinentry-mode=loopback" \
-			-k "${GPG_KEYID}" \
-			--sign builder \
-			"build/dpkg/packages/*.deb"
-	fi
-}
-
-sign_rpm() {
-  if [ -n "${GPG_KEYID}" ] ; then
-    find build/rpm/packages -name "*.rpm" -exec bash -c '
-	echo "yes" | setsid rpm \
-			--define "_gpg_name ${GPG_KEYID}" \
-			--define "_signature gpg" \
-			--define "__gpg_check_password_cmd /bin/true" \
-			--define "__gpg_sign_cmd %{__gpg} gpg --batch --no-armor --digest-algo 'sha512' --passphrase '${GPG_PASSPHRASE}' --no-secmem-warning -u '%{_gpg_name}' --sign --detach-sign --output %{__signature_filename} %{__plaintext_filename}" \
-			--addsign '{} \;
-	fi
-}
-
-case "${1}" in
-    dpkg)
-        sign_dpkg
-        ;;
-    rpm)
-        sign_rpm
-        ;;
-    *)
-        echo "Usage: ${0} (dpkg|rpm)"
-        ;;
-esac
-

Builds/containers/gitlab-ci/smoketest.sh

@@ -1,101 +0,0 @@
-#!/usr/bin/env sh
-set -e
-install_from=$1
-use_private=${2:-0} # this option not currently needed by any CI scripts,
-                    # reserved for possible future use
-if [ "$use_private" -gt 0 ] ; then
-    REPO_ROOT="https://rippled:${ARTIFACTORY_DEPLOY_KEY_RIPPLED}@${ARTIFACTORY_HOST}/artifactory"
-else
-    REPO_ROOT="${PUBLIC_REPO_ROOT}"
-fi
-
-. ./Builds/containers/gitlab-ci/get_component.sh
-
-. /etc/os-release
-case ${ID} in
-    ubuntu|debian)
-        pkgtype="dpkg"
-        ;;
-    fedora|centos|rhel|scientific|rocky|almalinux)
-        pkgtype="rpm"
-        ;;
-    *)
-        echo "unrecognized distro!"
-        exit 1
-        ;;
-esac
-
-# this script provides info variables about pkg version
-. build/${pkgtype}/packages/build_vars
-
-if [ "${pkgtype}" = "dpkg" ] ; then
-    # sometimes update fails and requires a cleanup
-    updateWithRetry()
-    {
-        if ! apt-get -y update ; then
-            rm -rvf /var/lib/apt/lists/*
-            apt-get -y clean
-            apt-get -y update
-        fi
-    }
-    if [ "${install_from}" = "repo" ] ; then
-        apt-get -y upgrade
-        updateWithRetry
-        apt-get -y install apt apt-transport-https ca-certificates coreutils util-linux wget gnupg
-        wget -q -O - "${REPO_ROOT}/api/gpg/key/public" | apt-key add -
-        echo "deb ${REPO_ROOT}/${DEB_REPO} ${DISTRO} ${COMPONENT}" >> /etc/apt/sources.list
-        updateWithRetry
-        # uncomment this next line if you want to see the available package versions
-        # apt-cache policy rippled
-        apt-get -y install rippled=${dpkg_full_version}
-    elif [ "${install_from}" = "local" ] ; then
-        # cached pkg install
-        updateWithRetry
-        apt-get -y install libprotobuf-dev libprotoc-dev protobuf-compiler libssl-dev
-        rm -f build/dpkg/packages/rippled-dbgsym*.*
-        dpkg --no-debsig -i build/dpkg/packages/*.deb
-    else
-        echo "unrecognized pkg source!"
-        exit 1
-    fi
-else
-    yum -y update
-    if [ "${install_from}" = "repo" ] ; then
-        pkgs=("yum-utils coreutils util-linux")
-        case "$ID" in
-            rocky|almalinux)
-                pkgs="${pkgs[@]/coreutils}"
-        esac
-        yum install -y $pkgs
-        REPOFILE="/etc/yum.repos.d/artifactory.repo"
-        echo "[Artifactory]" > ${REPOFILE}
-        echo "name=Artifactory" >> ${REPOFILE}
-        echo "baseurl=${REPO_ROOT}/${RPM_REPO}/${COMPONENT}/" >> ${REPOFILE}
-        echo "enabled=1" >> ${REPOFILE}
-        echo "gpgcheck=0" >> ${REPOFILE}
-        echo "gpgkey=${REPO_ROOT}/${RPM_REPO}/${COMPONENT}/repodata/repomd.xml.key" >> ${REPOFILE}
-        echo "repo_gpgcheck=1" >> ${REPOFILE}
-        yum -y update
-        # uncomment this next line if you want to see the available package versions
-        # yum --showduplicates list rippled
-        yum -y install ${rpm_version_release}
-    elif [ "${install_from}" = "local" ] ; then
-        rm -f build/rpm/packages/rippled-debug*.rpm
-        rm -f build/rpm/packages/rippled-devel*.rpm
-        rm -f build/rpm/packages/*.src.rpm
-        rpm -i build/rpm/packages/*.rpm
-    else
-        echo "unrecognized pkg source!"
-        exit 1
-    fi
-fi
-
-# verify installed version
-INSTALLED=$(/opt/ripple/bin/rippled --version | awk '{print $NF}')
-if [ "${rippled_version}" != "${INSTALLED}" ] ; then
-    echo "INSTALLED version ${INSTALLED} does not match ${rippled_version}"
-    exit 1
-fi
-# run unit tests
-/opt/ripple/bin/rippled --unittest --unittest-jobs $(nproc)
-/opt/ripple/bin/validator-keys --unittest

Builds/containers/gitlab-ci/tag_docker_image.sh

@@ -1,21 +0,0 @@
-#!/usr/bin/env sh
-set -e
-docker login -u rippled \
-    -p ${ARTIFACTORY_DEPLOY_KEY_RIPPLED} "${ARTIFACTORY_HUB}"
-# this gives us rippled_version :
-source build/rpm/packages/build_vars
-docker pull "${ARTIFACTORY_HUB}/${RPM_CONTAINER_FULLNAME}"
-docker pull "${ARTIFACTORY_HUB}/${DPKG_CONTAINER_FULLNAME}"
-# tag/push two labels...one using the current rippled version and one just using "latest"
-for label in ${rippled_version} latest ; do
-    docker tag \
-        "${ARTIFACTORY_HUB}/${RPM_CONTAINER_FULLNAME}" \
-        "${ARTIFACTORY_HUB}/${RPM_CONTAINER_NAME}:${label}_${CI_COMMIT_REF_SLUG}"
-    docker push \
-        "${ARTIFACTORY_HUB}/${RPM_CONTAINER_NAME}:${label}_${CI_COMMIT_REF_SLUG}"
-    docker tag \
-        "${ARTIFACTORY_HUB}/${DPKG_CONTAINER_FULLNAME}" \
-        "${ARTIFACTORY_HUB}/${DPKG_CONTAINER_NAME}:${label}_${CI_COMMIT_REF_SLUG}"
-    docker push \
-        "${ARTIFACTORY_HUB}/${DPKG_CONTAINER_NAME}:${label}_${CI_COMMIT_REF_SLUG}"
-done

Builds/containers/gitlab-ci/verify_head_commit.sh

@@ -1,17 +0,0 @@
-#!/usr/bin/env sh
-set -ex
-apt -y update
-DEBIAN_FRONTEND="noninteractive" apt-get -y install tzdata
-apt -y install software-properties-common curl git gnupg
-curl -sk -o rippled-pubkeys.txt "${GIT_SIGN_PUBKEYS_URL}"
-gpg --import rippled-pubkeys.txt
-if git verify-commit HEAD; then
-    echo "git commit signature check passed"
-else
-    echo "git commit signature check failed"
-    git log -n 5 --color \
-        --pretty=format:'%Cred%h%Creset -%C(yellow)%d%Creset %s %Cgreen(%cr) %C(bold blue)<%an> [%G?]%Creset' \
-        --abbrev-commit
-    exit 1
-fi
-

Builds/containers/packaging/dpkg/build_dpkg.sh

@@ -1,99 +0,0 @@
-#!/usr/bin/env bash
-set -ex
-
-# make sure pkg source files are up to date with repo
-cd /opt/rippled_bld/pkg
-cp -fpru rippled/Builds/containers/packaging/dpkg/debian/. debian/
-cp -fpu rippled/Builds/containers/shared/rippled*.service debian/
-cp -fpu rippled/Builds/containers/shared/update_sources.sh .
-source update_sources.sh
-
-# Build the dpkg
-
-#dpkg uses - as separator, so we need to change our -bN versions to tilde
-RIPPLED_DPKG_VERSION=$(echo "${RIPPLED_VERSION}" | sed 's!-!~!g')
-# TODO - decide how to handle the trailing/release
-# version here (hardcoded to 1). Does it ever need to change?
-RIPPLED_DPKG_FULL_VERSION="${RIPPLED_DPKG_VERSION}-1"
-git config --global --add safe.directory /opt/rippled_bld/pkg/rippled
-cd /opt/rippled_bld/pkg/rippled
-if [[ -n $(git status --porcelain) ]]; then
-    git status
-    error "Unstaged changes in this repo - please commit first"
-fi
-git archive --format tar.gz --prefix rippled-${RIPPLED_DPKG_VERSION}/ -o ../rippled-${RIPPLED_DPKG_VERSION}.tar.gz HEAD
-cd ..
-# dpkg debmake would normally create this link, but we do it manually
-ln -s ./rippled-${RIPPLED_DPKG_VERSION}.tar.gz rippled_${RIPPLED_DPKG_VERSION}.orig.tar.gz
-tar xvf rippled-${RIPPLED_DPKG_VERSION}.tar.gz
-cd rippled-${RIPPLED_DPKG_VERSION}
-cp -pr ../debian .
-
-# dpkg requires a changelog. We don't currently maintain
-# a useable one, so let's just fake it with our current version
-# TODO : not sure if the "unstable" will need to change for
-# release packages (?)
-NOWSTR=$(TZ=UTC date -R)
-cat << CHANGELOG > ./debian/changelog
-rippled (${RIPPLED_DPKG_FULL_VERSION}) unstable; urgency=low
-
-  * see RELEASENOTES
-
- -- Ripple Labs Inc. <support@ripple.com>  ${NOWSTR}
-CHANGELOG
-
-# PATH must be preserved for our more modern cmake in /opt/local
-# TODO : consider allowing lintian to run in future ?
-export DH_BUILD_DDEBS=1
-debuild --no-lintian --preserve-envvar PATH --preserve-env -us -uc
-rc=$?; if [[ $rc != 0 ]]; then
-    error "error building dpkg"
-fi
-cd ..
-
-# copy artifacts
-cp rippled-reporting_${RIPPLED_DPKG_FULL_VERSION}_amd64.deb ${PKG_OUTDIR}
-cp rippled_${RIPPLED_DPKG_FULL_VERSION}_amd64.deb ${PKG_OUTDIR}
-cp rippled_${RIPPLED_DPKG_FULL_VERSION}.dsc ${PKG_OUTDIR}
-# dbgsym suffix is ddeb under newer debuild, but just deb under earlier
-cp rippled-dbgsym_${RIPPLED_DPKG_FULL_VERSION}_amd64.* ${PKG_OUTDIR}
-cp rippled-reporting-dbgsym_${RIPPLED_DPKG_FULL_VERSION}_amd64.* ${PKG_OUTDIR}
-cp rippled_${RIPPLED_DPKG_FULL_VERSION}_amd64.changes ${PKG_OUTDIR}
-cp rippled_${RIPPLED_DPKG_FULL_VERSION}_amd64.build ${PKG_OUTDIR}
-cp rippled_${RIPPLED_DPKG_VERSION}.orig.tar.gz ${PKG_OUTDIR}
-cp rippled_${RIPPLED_DPKG_FULL_VERSION}.debian.tar.xz ${PKG_OUTDIR}
-# buildinfo is only generated by later version of debuild
-if [ -e rippled_${RIPPLED_DPKG_FULL_VERSION}_amd64.buildinfo ] ; then
-    cp rippled_${RIPPLED_DPKG_FULL_VERSION}_amd64.buildinfo ${PKG_OUTDIR}
-fi
-
-pushd ${PKG_OUTDIR}
-for f in *.ddeb; do mv -- "$f" "${f%.ddeb}.deb"; done
-popd
-
-cat rippled_${RIPPLED_DPKG_FULL_VERSION}_amd64.changes
-# extract the text in the .changes file that appears between
-#    Checksums-Sha256:  ...
-# and
-#    Files: ...
-awk '/Checksums-Sha256:/{hit=1;next}/Files:/{hit=0}hit' \
-    rippled_${RIPPLED_DPKG_VERSION}-1_amd64.changes | \
-        sed -E 's!^[[:space:]]+!!' > shasums
-DEB_SHA256=$(cat shasums | \
-    grep "rippled_${RIPPLED_DPKG_VERSION}-1_amd64.deb" | cut -d " " -f 1)
-DBG_SHA256=$(cat shasums | \
-    grep "rippled-dbgsym_${RIPPLED_DPKG_VERSION}-1_amd64.*" | cut -d " " -f 1)
-REPORTING_DBG_SHA256=$(cat shasums | \
-    grep "rippled-reporting-dbgsym_${RIPPLED_DPKG_VERSION}-1_amd64.*" | cut -d " " -f 1)
-REPORTING_SHA256=$(cat shasums | \
-    grep "rippled-reporting_${RIPPLED_DPKG_VERSION}-1_amd64.deb" | cut -d " " -f 1)
-SRC_SHA256=$(cat shasums | \
-    grep "rippled_${RIPPLED_DPKG_VERSION}.orig.tar.gz" | cut -d " " -f 1)
-echo "deb_sha256=${DEB_SHA256}" >> ${PKG_OUTDIR}/build_vars
-echo "dbg_sha256=${DBG_SHA256}" >> ${PKG_OUTDIR}/build_vars
-echo "reporting_sha256=${REPORTING_SHA256}" >> ${PKG_OUTDIR}/build_vars
-echo "reporting_dbg_sha256=${REPORTING_DBG_SHA256}" >> ${PKG_OUTDIR}/build_vars
-echo "src_sha256=${SRC_SHA256}" >> ${PKG_OUTDIR}/build_vars
-echo "rippled_version=${RIPPLED_VERSION}" >> ${PKG_OUTDIR}/build_vars
-echo "dpkg_version=${RIPPLED_DPKG_VERSION}" >> ${PKG_OUTDIR}/build_vars
-echo "dpkg_full_version=${RIPPLED_DPKG_FULL_VERSION}" >> ${PKG_OUTDIR}/build_vars

Builds/containers/packaging/dpkg/debian/README.Debian

@@ -1,3 +0,0 @@
-rippled daemon
-
- -- Mike Ellery <mellery451@gmail.com>  Tue, 04 Dec 2018 18:19:03 +0000

Builds/containers/packaging/dpkg/debian/compat

@@ -1 +0,0 @@
-10

Builds/containers/packaging/dpkg/debian/control

@@ -1,19 +0,0 @@
-Source: rippled
-Section: misc
-Priority: extra
-Maintainer: Ripple Labs Inc. <support@ripple.com>
-Build-Depends: cmake, debhelper (>=9), zlib1g-dev, dh-systemd, ninja-build
-Standards-Version: 3.9.7
-Homepage: http://ripple.com/
-
-Package: rippled
-Architecture: any
-Multi-Arch: foreign
-Depends: ${misc:Depends}, ${shlibs:Depends}
-Description: rippled daemon
-
-Package: rippled-reporting
-Architecture: any
-Multi-Arch: foreign
-Depends: ${misc:Depends}, ${shlibs:Depends}
-Description: rippled reporting daemon

Builds/containers/packaging/dpkg/debian/copyright

@@ -1,86 +0,0 @@
-Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
-Upstream-Name: rippled
-Source: https://github.com/ripple/rippled 
-
-Files: *
-Copyright: 2012-2019 Ripple Labs Inc.
-
-License:   __UNKNOWN__
-
-The accompanying files under various copyrights.
-
-Copyright (c) 2012, 2013, 2014 Ripple Labs Inc.
-
-Permission to use, copy, modify, and distribute this software for any
-purpose with or without fee is hereby granted, provided that the above
-copyright notice and this permission notice appear in all copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
-The accompanying files incorporate work covered by the following copyright
-and previous license notice:
-
-Copyright (c) 2011 Arthur Britto, David Schwartz, Jed McCaleb,
-Vinnie Falco, Bob Way, Eric Lombrozo, Nikolaos D. Bougalis, Howard Hinnant
-
-Some code from Raw Material Software, Ltd., provided under the terms of the
-  ISC License. See the corresponding source files for more details.
-  Copyright (c) 2013 - Raw Material Software Ltd.
-  Please visit http://www.juce.com
-
-Some code from ASIO examples:
-// Copyright (c) 2003-2011 Christopher M. Kohlhoff (chris at kohlhoff dot com)
-//
-// Distributed under the Boost Software License, Version 1.0. (See accompanying
-// file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
-
-Some code from Bitcoin:
-// Copyright (c) 2009-2010 Satoshi Nakamoto
-// Copyright (c) 2011 The Bitcoin developers
-// Distributed under the MIT/X11 software license, see the accompanying
-// file license.txt or http://www.opensource.org/licenses/mit-license.php.
-
-Some code from Tom Wu:
-This software is covered under the following copyright:
-
-/*
- * Copyright (c) 2003-2005  Tom Wu
- * All Rights Reserved.
- *
- * Permission is hereby granted, free of charge, to any person obtaining
- * a copy of this software and associated documentation files (the
- * "Software"), to deal in the Software without restriction, including
- * without limitation the rights to use, copy, modify, merge, publish,
- * distribute, sublicense, and/or sell copies of the Software, and to
- * permit persons to whom the Software is furnished to do so, subject to
- * the following conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, 
- * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY 
- * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  
- *
- * IN NO EVENT SHALL TOM WU BE LIABLE FOR ANY SPECIAL, INCIDENTAL,
- * INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR ANY DAMAGES WHATSOEVER
- * RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER OR NOT ADVISED OF
- * THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF LIABILITY, ARISING OUT
- * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- * In addition, the following condition applies:
- *
- * All redistributions must retain an intact copy of this copyright notice
- * and disclaimer.
- */
-
-Address all questions regarding this license to:
-
-  Tom Wu
-  tjw@cs.Stanford.EDU

Builds/containers/packaging/dpkg/debian/dirs

@@ -1,3 +0,0 @@
-/var/log/rippled/
-/var/lib/rippled/
-/etc/systemd/system/rippled.service.d/

Builds/containers/packaging/dpkg/debian/docs

@@ -1,3 +0,0 @@
-README.md
-LICENSE.md
-RELEASENOTES.md

Builds/containers/packaging/dpkg/debian/rippled-dev.install

@@ -1,3 +0,0 @@
-opt/ripple/include
-opt/ripple/lib/*.a
-opt/ripple/lib/cmake/ripple

Builds/containers/packaging/dpkg/debian/rippled-reporting.dirs

@@ -1,3 +0,0 @@
-/var/log/rippled-reporting/
-/var/lib/rippled-reporting/
-/etc/systemd/system/rippled-reporting.service.d/

Builds/containers/packaging/dpkg/debian/rippled-reporting.install

@@ -1,8 +0,0 @@
-build.rippled-reporting/rippled-reporting opt/rippled-reporting/bin
-cfg/rippled-reporting.cfg opt/rippled-reporting/etc
-debian/tmp/opt/rippled-reporting/etc/validators.txt opt/rippled-reporting/etc
-
-opt/rippled-reporting/bin/update-rippled-reporting.sh
-opt/rippled-reporting/bin/getRippledReportingInfo
-opt/rippled-reporting/etc/update-rippled-reporting-cron
-etc/logrotate.d/rippled-reporting

Builds/containers/packaging/dpkg/debian/rippled-reporting.links

@@ -1,3 +0,0 @@
-opt/rippled-reporting/etc/rippled-reporting.cfg etc/opt/rippled-reporting/rippled-reporting.cfg
-opt/rippled-reporting/etc/validators.txt etc/opt/rippled-reporting/validators.txt
-opt/rippled-reporting/bin/rippled-reporting usr/local/bin/rippled-reporting

Builds/containers/packaging/dpkg/debian/rippled-reporting.postinst

@@ -1,33 +0,0 @@
-#!/bin/sh
-set -e
-
-USER_NAME=rippled-reporting
-GROUP_NAME=rippled-reporting
-case "$1" in
-    configure)
-        id -u $USER_NAME >/dev/null 2>&1 || \
-        adduser --system --quiet \
-            --home /nonexistent --no-create-home \
-            --disabled-password \
-            --group "$GROUP_NAME"
-        chown -R $USER_NAME:$GROUP_NAME /var/log/rippled-reporting/
-        chown -R $USER_NAME:$GROUP_NAME /var/lib/rippled-reporting/
-        chmod 755 /var/log/rippled-reporting/
-        chmod 755 /var/lib/rippled-reporting/
-        chown -R $USER_NAME:$GROUP_NAME /opt/rippled-reporting
-
-    ;;
-
-    abort-upgrade|abort-remove|abort-deconfigure)
-    ;;
-
-    *)
-        echo "postinst called with unknown argument \`$1'" >&2
-        exit 1
-    ;;
-esac
-
-
-#DEBHELPER#
-
-exit 0

Builds/containers/packaging/dpkg/debian/rippled.conffiles

@@ -1,2 +0,0 @@
-/opt/ripple/etc/rippled.cfg
-/opt/ripple/etc/validators.txt

Builds/containers/packaging/dpkg/debian/rippled.install

@@ -1,8 +0,0 @@
-opt/ripple/bin/rippled
-opt/ripple/bin/validator-keys
-opt/ripple/bin/update-rippled.sh
-opt/ripple/bin/getRippledInfo
-opt/ripple/etc/rippled.cfg
-opt/ripple/etc/validators.txt
-opt/ripple/etc/update-rippled-cron
-etc/logrotate.d/rippled

Builds/containers/packaging/dpkg/debian/rippled.links

@@ -1,3 +0,0 @@
-opt/ripple/etc/rippled.cfg etc/opt/ripple/rippled.cfg
-opt/ripple/etc/validators.txt etc/opt/ripple/validators.txt
-opt/ripple/bin/rippled usr/local/bin/rippled

Builds/containers/packaging/dpkg/debian/rippled.postinst

@@ -1,35 +0,0 @@
-#!/bin/sh
-set -e
-
-USER_NAME=rippled
-GROUP_NAME=rippled
-case "$1" in
-    configure)
-        id -u $USER_NAME >/dev/null 2>&1 || \
-        adduser --system --quiet \
-            --home /nonexistent --no-create-home \
-            --disabled-password \
-            --group "$GROUP_NAME"
-        chown -R $USER_NAME:$GROUP_NAME /var/log/rippled/
-        chown -R $USER_NAME:$GROUP_NAME /var/lib/rippled/
-        chown -R $USER_NAME:$GROUP_NAME /opt/ripple
-        chmod 755 /var/log/rippled/
-        chmod 755 /var/lib/rippled/
-        chmod 644 /opt/ripple/etc/update-rippled-cron
-        chmod 644 /etc/logrotate.d/rippled
-        chown -R root:$GROUP_NAME /opt/ripple/etc/update-rippled-cron
-    ;;
-
-    abort-upgrade|abort-remove|abort-deconfigure)
-    ;;
-
-    *)
-        echo "postinst called with unknown argument \`$1'" >&2
-        exit 1
-    ;;
-esac
-
-
-#DEBHELPER#
-
-exit 0

Builds/containers/packaging/dpkg/debian/rippled.postrm

@@ -1,17 +0,0 @@
-#!/bin/sh
-set -e
-
-case "$1" in
-    purge|remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
-    ;;
-
-    *)
-        echo "postrm called with unknown argument \`$1'" >&2
-        exit 1
-    ;;
-esac
-
-
-#DEBHELPER#
-
-exit 0

Builds/containers/packaging/dpkg/debian/rippled.preinst

@@ -1,20 +0,0 @@
-#!/bin/sh
-set -e
-
-case "$1" in
-    install|upgrade)
-    ;;
-
-    abort-upgrade)
-    ;;
-
-    *)
-        echo "preinst called with unknown argument \`$1'" >&2
-        exit 1
-    ;;
-esac
-
-
-#DEBHELPER#
-
-exit 0

Builds/containers/packaging/dpkg/debian/rippled.prerm

@@ -1,20 +0,0 @@
-#!/bin/sh
-set -e
-
-case "$1" in
-    remove|upgrade|deconfigure)
-    ;;
-
-    failed-upgrade)
-    ;;
-
-    *)
-        echo "prerm called with unknown argument \`$1'" >&2
-        exit 1
-    ;;
-esac
-
-
-#DEBHELPER#
-
-exit 0

Builds/containers/packaging/dpkg/debian/rules

@@ -1,81 +0,0 @@
-#!/usr/bin/make -f
-export DH_VERBOSE = 1
-export DH_OPTIONS = -v
-# debuild sets some warnings that don't work well
-# for our curent build..so try to remove those flags here:
-export CFLAGS:=$(subst -Wformat,,$(CFLAGS))
-export CFLAGS:=$(subst -Werror=format-security,,$(CFLAGS))
-export CXXFLAGS:=$(subst -Wformat,,$(CXXFLAGS))
-export CXXFLAGS:=$(subst -Werror=format-security,,$(CXXFLAGS))
-
-%:
-	dh $@ --with systemd
-
-override_dh_systemd_start:
-	dh_systemd_start --no-restart-on-upgrade
-
-override_dh_auto_configure:
-	/root/.pyenv/shims/conan export external/snappy snappy/1.1.10@
-	/root/.pyenv/shims/conan export external/soci soci/4.0.3@
-
-	mkdir build.rippled
-
-	cd build.rippled && \
-		/root/.pyenv/shims/conan install .. \
-			--profile gcc \
-			--output-folder . \
-			--build missing \
-			--settings build_type=Release
-
-	cd build.rippled && \
-		cmake .. \
-			-DCMAKE_BUILD_TYPE=Release \
-			-Dvalidator_keys=ON \
-			-DCMAKE_VERBOSE_MAKEFILE=ON \
-			-DCMAKE_TOOLCHAIN_FILE:FILEPATH=build/generators/conan_toolchain.cmake
-
-	mkdir build.rippled-reporting
-
-	cd build.rippled-reporting && \
-		/root/.pyenv/shims/conan install .. \
-			--profile gcc \
-			--output-folder . \
-			--settings compiler.cppstd=17 \
-			--settings build_type=Release \
-			--build missing \
-			--build boost \
-			--build sqlite3 \
-			--build libuv \
-			--options reporting=True
-
-	cd build.rippled-reporting && \
-		cmake .. \
-			-DCMAKE_BUILD_TYPE=Release \
-			-Dvalidator_keys=ON \
-			-Dstatic=ON \
-			-Dunity=OFF \
-			-Dreporting=ON \
-			-DCMAKE_VERBOSE_MAKEFILE=ON \
-			-DCMAKE_TOOLCHAIN_FILE:FILEPATH=build/generators/conan_toolchain.cmake
-
-override_dh_auto_build:
-	cmake --build build.rippled --target rippled --target validator-keys --parallel 8
-	cmake --build build.rippled-reporting --target rippled --parallel 8
-
-override_dh_auto_install:
-	cmake --install build.rippled --prefix debian/tmp/opt/ripple
-	install -D build.rippled/validator-keys/validator-keys debian/tmp/opt/ripple/bin/validator-keys
-	install -D Builds/containers/shared/update-rippled.sh debian/tmp/opt/ripple/bin/update-rippled.sh
-	install -D bin/getRippledInfo debian/tmp/opt/ripple/bin/getRippledInfo
-	install -D Builds/containers/shared/update-rippled-cron debian/tmp/opt/ripple/etc/update-rippled-cron
-	install -D Builds/containers/shared/rippled-logrotate debian/tmp/etc/logrotate.d/rippled
-	rm -rf debian/tmp/opt/ripple/lib64/cmake/date
-
-	mkdir -p debian/tmp/opt/rippled-reporting/etc
-	mkdir -p debian/tmp/opt/rippled-reporting/bin
-	cp cfg/validators-example.txt debian/tmp/opt/rippled-reporting/etc/validators.txt
-
-	sed -E 's/rippled?/rippled-reporting/g' Builds/containers/shared/update-rippled.sh > debian/tmp/opt/rippled-reporting/bin/update-rippled-reporting.sh
-	sed -E 's/rippled?/rippled-reporting/g' bin/getRippledInfo > debian/tmp/opt/rippled-reporting/bin/getRippledReportingInfo
-	sed -E 's/rippled?/rippled-reporting/g' Builds/containers/shared/update-rippled-cron > debian/tmp/opt/rippled-reporting/etc/update-rippled-reporting-cron
-	sed -E 's/rippled?/rippled-reporting/g' Builds/containers/shared/rippled-logrotate > debian/tmp/etc/logrotate.d/rippled-reporting

Builds/containers/packaging/dpkg/debian/source/format

@@ -1 +0,0 @@
-3.0 (quilt)

Builds/containers/packaging/dpkg/debian/source/local-options

@@ -1,2 +0,0 @@
-#abort-on-upstream-changes
-#unapply-patches

Builds/containers/packaging/rpm/50-rippled-reporting.preset

@@ -1 +0,0 @@
-enable rippled-reporting.service

Builds/containers/packaging/rpm/50-rippled.preset

@@ -1 +0,0 @@
-enable rippled.service

Builds/containers/packaging/rpm/build_rpm.sh

@@ -1,82 +0,0 @@
-#!/usr/bin/env bash
-set -ex
-
-cd /opt/rippled_bld/pkg
-cp -fpu rippled/Builds/containers/packaging/rpm/rippled.spec .
-cp -fpu rippled/Builds/containers/shared/update_sources.sh .
-source update_sources.sh
-
-# Build the rpm
-
-IFS='-' read -r RIPPLED_RPM_VERSION RELEASE <<< "$RIPPLED_VERSION"
-export RIPPLED_RPM_VERSION
-
-RPM_RELEASE=${RPM_RELEASE-1}
-
-# post-release version
-if [ "hf" = "$(echo "$RELEASE" | cut -c -2)" ]; then
-    RPM_RELEASE="${RPM_RELEASE}.${RELEASE}"
-# pre-release version (-b or -rc)
-elif [[ $RELEASE ]]; then
-    RPM_RELEASE="0.${RPM_RELEASE}.${RELEASE}"
-fi
-
-export RPM_RELEASE
-
-if [[ $RPM_PATCH ]]; then
-    RPM_PATCH=".${RPM_PATCH}"
-    export RPM_PATCH
-fi
-
-cd /opt/rippled_bld/pkg/rippled
-
-if [[ -n $(git status --porcelain) ]]; then
-   git status
-   error "Unstaged changes in this repo - please commit first"
-fi
-
-git archive --format tar.gz --prefix rippled/ -o ../rpmbuild/SOURCES/rippled.tar.gz HEAD
-
-cd ..
-
-source /opt/rh/devtoolset-11/enable
-
-rpmbuild --define "_topdir ${PWD}/rpmbuild" -ba rippled.spec
-
-rc=$?; if [[ $rc != 0 ]]; then
-    error "error building rpm"
-fi
-
-# Make a tar of the rpm and source rpm
-RPM_VERSION_RELEASE=$(rpm -qp --qf='%{NAME}-%{VERSION}-%{RELEASE}' ./rpmbuild/RPMS/x86_64/rippled-[0-9]*.rpm)
-tar_file=$RPM_VERSION_RELEASE.tar.gz
-
-cp ./rpmbuild/RPMS/x86_64/* ${PKG_OUTDIR}
-cp ./rpmbuild/SRPMS/* ${PKG_OUTDIR}
-
-RPM_MD5SUM=$(rpm -q --queryformat '%{SIGMD5}\n' -p ./rpmbuild/RPMS/x86_64/rippled-[0-9]*.rpm 2>/dev/null)
-DBG_MD5SUM=$(rpm -q --queryformat '%{SIGMD5}\n' -p ./rpmbuild/RPMS/x86_64/rippled-debuginfo*.rpm 2>/dev/null)
-DEV_MD5SUM=$(rpm -q --queryformat '%{SIGMD5}\n' -p ./rpmbuild/RPMS/x86_64/rippled-devel*.rpm 2>/dev/null)
-REP_MD5SUM=$(rpm -q --queryformat '%{SIGMD5}\n' -p ./rpmbuild/RPMS/x86_64/rippled-reporting*.rpm 2>/dev/null)
-SRC_MD5SUM=$(rpm -q --queryformat '%{SIGMD5}\n' -p ./rpmbuild/SRPMS/*.rpm 2>/dev/null)
-
-RPM_SHA256="$(sha256sum ./rpmbuild/RPMS/x86_64/rippled-[0-9]*.rpm | awk '{ print $1}')"
-DBG_SHA256="$(sha256sum ./rpmbuild/RPMS/x86_64/rippled-debuginfo*.rpm | awk '{ print $1}')"
-REP_SHA256="$(sha256sum ./rpmbuild/RPMS/x86_64/rippled-reporting*.rpm | awk '{ print $1}')"
-DEV_SHA256="$(sha256sum ./rpmbuild/RPMS/x86_64/rippled-devel*.rpm | awk '{ print $1}')"
-SRC_SHA256="$(sha256sum ./rpmbuild/SRPMS/*.rpm | awk '{ print $1}')"
-
-echo "rpm_md5sum=$RPM_MD5SUM" >  ${PKG_OUTDIR}/build_vars
-echo "rep_md5sum=$REP_MD5SUM" >> ${PKG_OUTDIR}/build_vars
-echo "dbg_md5sum=$DBG_MD5SUM" >> ${PKG_OUTDIR}/build_vars
-echo "dev_md5sum=$DEV_MD5SUM" >> ${PKG_OUTDIR}/build_vars
-echo "src_md5sum=$SRC_MD5SUM" >> ${PKG_OUTDIR}/build_vars
-echo "rpm_sha256=$RPM_SHA256" >> ${PKG_OUTDIR}/build_vars
-echo "rep_sha256=$REP_SHA256" >> ${PKG_OUTDIR}/build_vars
-echo "dbg_sha256=$DBG_SHA256" >> ${PKG_OUTDIR}/build_vars
-echo "dev_sha256=$DEV_SHA256" >> ${PKG_OUTDIR}/build_vars
-echo "src_sha256=$SRC_SHA256" >> ${PKG_OUTDIR}/build_vars
-echo "rippled_version=$RIPPLED_VERSION" >> ${PKG_OUTDIR}/build_vars
-echo "rpm_version=$RIPPLED_RPM_VERSION" >> ${PKG_OUTDIR}/build_vars
-echo "rpm_file_name=$tar_file" >> ${PKG_OUTDIR}/build_vars
-echo "rpm_version_release=$RPM_VERSION_RELEASE" >> ${PKG_OUTDIR}/build_vars

Builds/containers/packaging/rpm/rippled.spec

@@ -1,239 +0,0 @@
-%define rippled_version %(echo $RIPPLED_RPM_VERSION)
-%define rpm_release %(echo $RPM_RELEASE)
-%define rpm_patch %(echo $RPM_PATCH)
-%define _prefix /opt/ripple
-
-Name:           rippled
-# Dashes in Version extensions must be converted to underscores
-Version:        %{rippled_version}
-Release:        %{rpm_release}%{?dist}%{rpm_patch}
-Summary:        rippled daemon
-
-License:        MIT
-URL:            http://ripple.com/
-Source0:        rippled.tar.gz
-
-BuildRequires:  cmake zlib-static ninja-build
-
-%description
-rippled
-
-%package devel
-Summary: Files for development of applications using xrpl core library
-Group: Development/Libraries
-Requires: zlib-static
-
-%description devel
-core library for development of standalone applications that sign transactions.
-
-%package reporting
-Summary: Reporting Server for rippled
-
-%description reporting
-History server for XRP Ledger
-
-%prep
-%setup -c -n rippled
-
-%build
-
-source /opt/rh/devtoolset-11/enable
-source /opt/rh/rh-python38/enable
-
-pip install "conan<2"
-
-conan profile new default --detect
-conan profile update settings.compiler.cppstd=20 default
-conan profile update settings.compiler.libcxx=libstdc++11 default
-
-cd rippled
-
-conan export external/snappy snappy/1.1.10@
-conan export external/soci soci/4.0.3@
-
-mkdir -p bld.rippled
-pushd bld.rippled
-
-cp /opt/libcstd/libstdc++.so.6.0.22 /usr/lib64
-cp /opt/libcstd/libstdc++.so.6.0.22 /lib64
-ln -sf /usr/lib64/libstdc++.so.6.0.22 /usr/lib64/libstdc++.so.6
-ln -sf /lib64/libstdc++.so.6.0.22 /usr/lib64/libstdc++.so.6
-
-conan install .. \
-    --profile default \
-    --output-folder . \
-    --build missing \
-    --settings build_type=Release
-
-cmake .. \
-    -DCMAKE_BUILD_TYPE=Release \
-    -Dvalidator_keys=ON \
-    -DCMAKE_INSTALL_PREFIX=%{_prefix} \
-    -DCMAKE_VERBOSE_MAKEFILE=ON \
-    -DCMAKE_TOOLCHAIN_FILE:FILEPATH=build/generators/conan_toolchain.cmake
-
-cmake --build . --parallel $(nproc) --target rippled --target validator-keys
-
-popd
-
-mkdir -p bld.rippled-reporting
-pushd bld.rippled-reporting
-
-conan install .. \
-     --settings build_type=Release \
-     --output-folder . \
-     --build missing \
-     --settings compiler.cppstd=17 \
-     --options reporting=True
-
-cmake .. \
-    -G Ninja \
-    -DCMAKE_TOOLCHAIN_FILE:FILEPATH=build/generators/conan_toolchain.cmake \
-    -DCMAKE_INSTALL_PREFIX=%{_prefix} \
-    -DCMAKE_BUILD_TYPE=Release \
-    -Dunity=OFF \
-    -Dstatic=ON \
-    -Dvalidator_keys=ON \
-    -Dreporting=ON \
-    -DCMAKE_VERBOSE_MAKEFILE=ON \
-
-cmake --build . --parallel $(nproc) --target rippled
-
-%pre
-test -e /etc/pki/tls || { mkdir -p /etc/pki; ln -s /usr/lib/ssl /etc/pki/tls; }
-
-%install
-rm -rf $RPM_BUILD_ROOT
-DESTDIR=$RPM_BUILD_ROOT cmake --build rippled/bld.rippled --target install #-- -v
-mkdir -p $RPM_BUILD_ROOT
-rm -rf ${RPM_BUILD_ROOT}%{_prefix}/lib64/
-install -d ${RPM_BUILD_ROOT}/etc/opt/ripple
-install -d ${RPM_BUILD_ROOT}/usr/local/bin
-
-install -D ./rippled/cfg/rippled-example.cfg ${RPM_BUILD_ROOT}/%{_prefix}/etc/rippled.cfg
-install -D ./rippled/cfg/validators-example.txt ${RPM_BUILD_ROOT}/%{_prefix}/etc/validators.txt
-
-ln -sf %{_prefix}/etc/rippled.cfg ${RPM_BUILD_ROOT}/etc/opt/ripple/rippled.cfg
-ln -sf %{_prefix}/etc/validators.txt ${RPM_BUILD_ROOT}/etc/opt/ripple/validators.txt
-ln -sf %{_prefix}/bin/rippled ${RPM_BUILD_ROOT}/usr/local/bin/rippled
-install -D rippled/bld.rippled/validator-keys/validator-keys ${RPM_BUILD_ROOT}%{_bindir}/validator-keys
-install -D ./rippled/Builds/containers/shared/rippled.service ${RPM_BUILD_ROOT}/usr/lib/systemd/system/rippled.service
-install -D ./rippled/Builds/containers/packaging/rpm/50-rippled.preset ${RPM_BUILD_ROOT}/usr/lib/systemd/system-preset/50-rippled.preset
-install -D ./rippled/Builds/containers/shared/update-rippled.sh ${RPM_BUILD_ROOT}%{_bindir}/update-rippled.sh
-install -D ./rippled/bin/getRippledInfo ${RPM_BUILD_ROOT}%{_bindir}/getRippledInfo
-install -D ./rippled/Builds/containers/shared/update-rippled-cron ${RPM_BUILD_ROOT}%{_prefix}/etc/update-rippled-cron
-install -D ./rippled/Builds/containers/shared/rippled-logrotate ${RPM_BUILD_ROOT}/etc/logrotate.d/rippled
-install -d $RPM_BUILD_ROOT/var/log/rippled
-install -d $RPM_BUILD_ROOT/var/lib/rippled
-
-# reporting mode
-%define _prefix /opt/rippled-reporting
-mkdir -p ${RPM_BUILD_ROOT}/etc/opt/rippled-reporting/
-install -D rippled/bld.rippled-reporting/rippled-reporting ${RPM_BUILD_ROOT}%{_bindir}/rippled-reporting
-install -D ./rippled/cfg/rippled-reporting.cfg ${RPM_BUILD_ROOT}%{_prefix}/etc/rippled-reporting.cfg
-install -D ./rippled/cfg/validators-example.txt ${RPM_BUILD_ROOT}%{_prefix}/etc/validators.txt
-install -D ./rippled/Builds/containers/packaging/rpm/50-rippled-reporting.preset ${RPM_BUILD_ROOT}/usr/lib/systemd/system-preset/50-rippled-reporting.preset
-ln -sf %{_prefix}/bin/rippled-reporting ${RPM_BUILD_ROOT}/usr/local/bin/rippled-reporting
-ln -sf %{_prefix}/etc/rippled-reporting.cfg ${RPM_BUILD_ROOT}/etc/opt/rippled-reporting/rippled-reporting.cfg
-ln -sf %{_prefix}/etc/validators.txt ${RPM_BUILD_ROOT}/etc/opt/rippled-reporting/validators.txt
-install -d $RPM_BUILD_ROOT/var/log/rippled-reporting
-install -d $RPM_BUILD_ROOT/var/lib/rippled-reporting
-install -D ./rippled/Builds/containers/shared/rippled-reporting.service ${RPM_BUILD_ROOT}/usr/lib/systemd/system/rippled-reporting.service
-sed -E 's/rippled?/rippled-reporting/g' ./rippled/Builds/containers/shared/update-rippled.sh > ${RPM_BUILD_ROOT}%{_bindir}/update-rippled-reporting.sh
-sed -E 's/rippled?/rippled-reporting/g' ./rippled/bin/getRippledInfo > ${RPM_BUILD_ROOT}%{_bindir}/getRippledReportingInfo
-sed -E 's/rippled?/rippled-reporting/g' ./rippled/Builds/containers/shared/update-rippled-cron > ${RPM_BUILD_ROOT}%{_prefix}/etc/update-rippled-reporting-cron
-sed -E 's/rippled?/rippled-reporting/g' ./rippled/Builds/containers/shared/rippled-logrotate > ${RPM_BUILD_ROOT}/etc/logrotate.d/rippled-reporting
-
-
-%post
-%define _prefix /opt/ripple
-USER_NAME=rippled
-GROUP_NAME=rippled
-
-getent passwd $USER_NAME &>/dev/null || useradd $USER_NAME
-getent group $GROUP_NAME &>/dev/null || groupadd $GROUP_NAME
-
-chown -R $USER_NAME:$GROUP_NAME /var/log/rippled/
-chown -R $USER_NAME:$GROUP_NAME /var/lib/rippled/
-chown -R $USER_NAME:$GROUP_NAME %{_prefix}/
-
-chmod 755 /var/log/rippled/
-chmod 755 /var/lib/rippled/
-
-chmod 644 %{_prefix}/etc/update-rippled-cron
-chmod 644 /etc/logrotate.d/rippled
-chown -R root:$GROUP_NAME %{_prefix}/etc/update-rippled-cron
-
-%post reporting
-%define _prefix /opt/rippled-reporting
-USER_NAME=rippled-reporting
-GROUP_NAME=rippled-reporting
-
-getent passwd $USER_NAME &>/dev/null || useradd -r $USER_NAME
-getent group $GROUP_NAME &>/dev/null || groupadd $GROUP_NAME
-
-chown -R $USER_NAME:$GROUP_NAME /var/log/rippled-reporting/
-chown -R $USER_NAME:$GROUP_NAME /var/lib/rippled-reporting/
-chown -R $USER_NAME:$GROUP_NAME %{_prefix}/
-
-chmod 755 /var/log/rippled-reporting/
-chmod 755 /var/lib/rippled-reporting/
-chmod -x /usr/lib/systemd/system/rippled-reporting.service
-
-
-%files
-%define _prefix /opt/ripple
-%doc rippled/README.md rippled/LICENSE.md
-%{_bindir}/rippled
-/usr/local/bin/rippled
-%{_bindir}/update-rippled.sh
-%{_bindir}/getRippledInfo
-%{_prefix}/etc/update-rippled-cron
-%{_bindir}/validator-keys
-%config(noreplace) %{_prefix}/etc/rippled.cfg
-%config(noreplace) /etc/opt/ripple/rippled.cfg
-%config(noreplace) %{_prefix}/etc/validators.txt
-%config(noreplace) /etc/opt/ripple/validators.txt
-%config(noreplace) /etc/logrotate.d/rippled
-%config(noreplace) /usr/lib/systemd/system/rippled.service
-%config(noreplace) /usr/lib/systemd/system-preset/50-rippled.preset
-
-%dir /var/log/rippled/
-%dir /var/lib/rippled/
-
-%files devel
-%{_prefix}/include
-%{_prefix}/lib/*.a
-%{_prefix}/lib/cmake/ripple
-
-%files reporting
-%define _prefix /opt/rippled-reporting
-%doc rippled/README.md rippled/LICENSE.md
-
-%{_bindir}/rippled-reporting
-/usr/local/bin/rippled-reporting
-%config(noreplace) /etc/opt/rippled-reporting/rippled-reporting.cfg
-%config(noreplace) %{_prefix}/etc/rippled-reporting.cfg
-%config(noreplace) %{_prefix}/etc/validators.txt
-%config(noreplace) /etc/opt/rippled-reporting/validators.txt
-%config(noreplace) /usr/lib/systemd/system/rippled-reporting.service
-%config(noreplace) /usr/lib/systemd/system-preset/50-rippled-reporting.preset
-%dir /var/log/rippled-reporting/
-%dir /var/lib/rippled-reporting/
-%{_bindir}/update-rippled-reporting.sh
-%{_bindir}/getRippledReportingInfo
-%{_prefix}/etc/update-rippled-reporting-cron
-%config(noreplace) /etc/logrotate.d/rippled-reporting
-
-%changelog
-* Wed Aug 28 2019 Mike Ellery <mellery451@gmail.com>
-- Switch to subproject build for validator-keys
-
-* Wed May 15 2019 Mike Ellery <mellery451@gmail.com>
-- Make validator-keys use local rippled build for core lib
-
-* Wed Aug 01 2018 Mike Ellery <mellery451@gmail.com>
-- add devel package for signing library
-
-* Thu Jun 02 2016 Brandon Wilson <bwilson@ripple.com>
-- Install validators.txt

Builds/containers/shared/install_cmake.sh

@@ -1,37 +0,0 @@
-#!/usr/bin/env bash
-set -e
-
-IFS=. read cm_maj cm_min cm_rel <<<"$1"
-: ${cm_rel:-0}
-CMAKE_ROOT=${2:-"${HOME}/cmake"}
-
-function cmake_version ()
-{
-    if [[ -d ${CMAKE_ROOT} ]] ; then
-        local perms=$(test $(uname) = "Linux" && echo "/111" || echo "+111")
-        local installed=$(find ${CMAKE_ROOT} -perm ${perms} -type f -name cmake)
-        if [[ "${installed}" != "" ]] ; then
-            echo "$(${installed} --version | head -1)"
-        fi
-    fi
-}
-
-installed=$(cmake_version)
-if [[ "${installed}" != "" && ${installed} =~ ${cm_maj}.${cm_min}.${cm_rel} ]] ; then
-    echo "cmake already installed: ${installed}"
-    exit
-fi
-# From CMake 20+ "Linux" is lowercase so using `uname` won't create be the correct path
-if [ ${cm_min} -gt 19 ]; then
-    linux="linux"
-else
-    linux=$(uname)
-fi
-pkgname="cmake-${cm_maj}.${cm_min}.${cm_rel}-${linux}-x86_64.tar.gz"
-tmppkg="/tmp/cmake.tar.gz"
-wget --quiet https://cmake.org/files/v${cm_maj}.${cm_min}/${pkgname} -O ${tmppkg}
-mkdir -p ${CMAKE_ROOT}
-cd ${CMAKE_ROOT}
-tar --strip-components 1 -xf ${tmppkg}
-rm -f ${tmppkg}
-echo "installed: $(cmake_version)"