refactor: Exempt sfAssetsTotal from the associateAsset sweep post-Lend11

Replace the per-transactor `if (!useDust)` gate around
`associateAsset(*vaultSle, asset)` and the pre-truncation
`- split.receiver->dustDelta` compensation in the dust-aware
Vault writes with a metadata-driven exemption on sfAssetsTotal
itself. Under featureLendingProtocolV1_1, sfAssetsTotal now
retains full Number (19-digit) precision instead of being
truncated to STAmount (16-digit) precision at end of transactor,
so it can absorb the same sub-quantum residual that sfDust
absorbs on the custody line. The receivable invariant becomes
`sfAssetsTotal − (sfAssetsAvailable + custodyLine.sfDust) =
Σ PrincipalOutstanding`, which reduces to the classic form
pre-amendment (dust always zero) and holds byte-for-byte across
arbitrarily long dust-bearing sequences post-amendment.

Design (no signature changes, no plumbing at any of the ~19
associateAsset call sites):

- Introduce `SField::kSmdAssetPreLend11 = 0x100`, semantically
  "swept only when featureLendingProtocolV1_1 is not enabled."
- Retag sfAssetsTotal from `kSmdNeedsAsset | kSmdDefault` to
  `kSmdAssetPreLend11 | kSmdDefault`. sfAssetsAvailable,
  sfAssetsMaximum, sfLossUnrealized keep kSmdNeedsAsset.
- `associateAsset(SLE&, Asset const&)` gate becomes the union
  `kSmdNeedsAsset || (kSmdAssetPreLend11 &&
  !isFeatureEnabled(featureLendingProtocolV1_1))`, read from the
  thread-local CurrentTransactionRulesGuard. No rules installed
  → returns false → sweep runs (safe legacy behavior).
- Widen the Debug-only sanity assertion in
  `STNumber::associateAsset` to accept either bit. The
  serialisation-path check at STNumber::add remains keyed on
  kSmdNeedsAsset only — that is what keeps sfAssetsTotal at full
  precision on the wire post-amendment.

Consequences:

- addVaultAssets: `sfAssetsTotal += Number{valueDelta}` (no
  `- dustDelta` compensation).
- reconcileSenderDust: only sfAssetsAvailable moves on a
  sender-leg dust reshuffle; sfAssetsTotal is unchanged because
  the underlying quantity on the custody line is unchanged.
- LoanPay: unconditional `associateAsset(*vaultSle, asset)`; the
  20-line docblock explaining the local skip is gone.
- VaultInvariant: sfAssetsTotal delta comparisons in the
  deposit / withdraw / clawback branches now use the extended
  delta `delta + dustDelta`. Pre-amendment dustDelta is always
  zero, so the check reduces to the classic form there.

Tests:

- New src/tests/libxrpl/protocol/STTakesAsset.cpp — 6 targeted
  gtest cases covering the sweep for (kSmdNeedsAsset-only,
  kSmdAssetPreLend11-only, both, neither) × (rules on, rules
  off, no rules installed).
- Existing Vault/Loan suites re-baselined to the dust-inclusive
  invariant via `readVaultDust()`; the shared VaultRounding_test
  fixtures now degrade cleanly to the classic RED contract on
  the base branch where readVaultDust() returns zero.

.clang-tidy

@@ -1,171 +1,92 @@
 ---
 Checks: "-*,
-  bugprone-argument-comment,
-  bugprone-assert-side-effect,
-  bugprone-bad-signal-to-kill-thread,
-  bugprone-bool-pointer-implicit-conversion,
-  bugprone-capturing-this-in-member-variable,
-  bugprone-casting-through-void,
-  bugprone-chained-comparison,
-  bugprone-compare-pointer-to-member-virtual-function,
-  bugprone-copy-constructor-init,
-  bugprone-crtp-constructor-accessibility,
-  bugprone-dangling-handle,
-  bugprone-dynamic-static-initializers,
-  bugprone-empty-catch,
-  bugprone-fold-init-type,
-  bugprone-forward-declaration-namespace,
-  bugprone-inaccurate-erase,
-  bugprone-inc-dec-in-conditions,
-  bugprone-incorrect-enable-if,
-  bugprone-incorrect-roundings,
-  bugprone-infinite-loop,
-  bugprone-integer-division,
-  bugprone-lambda-function-name,
-  bugprone-macro-parentheses,
-  bugprone-macro-repeated-side-effects,
-  bugprone-misleading-setter-of-reference,
-  bugprone-misplaced-operator-in-strlen-in-alloc,
-  bugprone-misplaced-pointer-arithmetic-in-alloc,
-  bugprone-misplaced-widening-cast,
-  bugprone-move-forwarding-reference,
-  bugprone-multi-level-implicit-pointer-conversion,
-  bugprone-multiple-new-in-one-expression,
-  bugprone-multiple-statement-macro,
-  bugprone-no-escape,
-  bugprone-non-zero-enum-to-bool-conversion,
-  bugprone-optional-value-conversion,
-  bugprone-parent-virtual-call,
-  bugprone-pointer-arithmetic-on-polymorphic-object,
-  bugprone-posix-return,
-  bugprone-redundant-branch-condition,
-  bugprone-reserved-identifier,
-  bugprone-return-const-ref-from-parameter,
-  bugprone-shared-ptr-array-mismatch,
-  bugprone-signal-handler,
-  bugprone-signed-char-misuse,
-  bugprone-sizeof-container,
-  bugprone-sizeof-expression,
-  bugprone-spuriously-wake-up-functions,
-  bugprone-standalone-empty,
-  bugprone-string-constructor,
-  bugprone-string-integer-assignment,
-  bugprone-string-literal-with-embedded-nul,
-  bugprone-stringview-nullptr,
-  bugprone-suspicious-enum-usage,
-  bugprone-suspicious-include,
-  bugprone-suspicious-memory-comparison,
-  bugprone-suspicious-memset-usage,
-  bugprone-suspicious-missing-comma,
-  bugprone-suspicious-realloc-usage,
-  bugprone-suspicious-semicolon,
-  bugprone-suspicious-string-compare,
-  bugprone-suspicious-stringview-data-usage,
-  bugprone-swapped-arguments,
-  bugprone-switch-missing-default-case,
-  bugprone-terminating-continue,
-  bugprone-throw-keyword-missing,
-  bugprone-too-small-loop-variable,
-  bugprone-unchecked-optional-access,
-  bugprone-undefined-memory-manipulation,
-  bugprone-undelegated-constructor,
-  bugprone-unhandled-exception-at-new,
-  bugprone-unhandled-self-assignment,
-  bugprone-unique-ptr-array-mismatch,
-  bugprone-unsafe-functions,
-  bugprone-unused-local-non-trivial-variable,
-  bugprone-unused-raii,
-  bugprone-unused-return-value,
-  bugprone-use-after-move,
-  bugprone-virtual-near-miss,
-  cppcoreguidelines-init-variables,
-  cppcoreguidelines-misleading-capture-default-by-value,
-  cppcoreguidelines-no-suspend-with-lock,
-  cppcoreguidelines-pro-type-member-init,
-  cppcoreguidelines-pro-type-static-cast-downcast,
-  cppcoreguidelines-rvalue-reference-param-not-moved,
-  cppcoreguidelines-use-default-member-init,
-  cppcoreguidelines-use-enum-class,
-  cppcoreguidelines-virtual-class-destructor,
-  hicpp-ignored-remove-result,
+  bugprone-*,
+  -bugprone-easily-swappable-parameters,
+  -bugprone-exception-escape,
+  -bugprone-implicit-widening-of-multiplication-result,
+  -bugprone-narrowing-conversions,
+  -bugprone-throwing-static-initialization,
+
+  cppcoreguidelines-*,
+  -cppcoreguidelines-avoid-c-arrays,
+  -cppcoreguidelines-avoid-const-or-ref-data-members,
+  -cppcoreguidelines-avoid-do-while,
+  -cppcoreguidelines-avoid-magic-numbers,
+  -cppcoreguidelines-avoid-non-const-global-variables,
+  -cppcoreguidelines-c-copy-assignment-signature,
+  -cppcoreguidelines-interfaces-global-init,
+  -cppcoreguidelines-macro-usage,
+  -cppcoreguidelines-missing-std-forward,
+  -cppcoreguidelines-narrowing-conversions,
+  -cppcoreguidelines-noexcept-move-operations,
+  -cppcoreguidelines-non-private-member-variables-in-classes,
+  -cppcoreguidelines-owning-memory,
+  -cppcoreguidelines-pro-bounds-array-to-pointer-decay,
+  -cppcoreguidelines-pro-bounds-avoid-unchecked-container-access,
+  -cppcoreguidelines-pro-bounds-constant-array-index,
+  -cppcoreguidelines-pro-bounds-pointer-arithmetic,
+  -cppcoreguidelines-pro-type-reinterpret-cast,
+  -cppcoreguidelines-pro-type-union-access,
+  -cppcoreguidelines-special-member-functions,
+
   llvm-namespace-comment,
-  misc-const-correctness,
-  misc-definitions-in-headers,
-  misc-header-include-cycle,
-  misc-include-cleaner,
-  misc-misplaced-const,
-  misc-redundant-expression,
-  misc-static-assert,
-  misc-throw-by-value-catch-by-reference,
-  misc-unused-alias-decls,
-  misc-unused-using-decls,
-  modernize-concat-nested-namespaces,
-  modernize-deprecated-headers,
-  modernize-make-shared,
-  modernize-make-unique,
-  modernize-pass-by-value,
-  modernize-type-traits,
-  modernize-use-designated-initializers,
-  modernize-use-emplace,
-  modernize-use-equals-default,
-  modernize-use-equals-delete,
-  modernize-use-nodiscard,
-  modernize-use-override,
-  modernize-use-ranges,
-  modernize-use-scoped-lock,
-  modernize-use-starts-ends-with,
-  modernize-use-std-numbers,
-  modernize-use-using,
-  performance-faster-string-find,
-  performance-for-range-copy,
-  performance-implicit-conversion-in-loop,
-  performance-inefficient-vector-operation,
-  performance-move-const-arg,
-  performance-move-constructor-init,
-  performance-no-automatic-move,
-  performance-trivially-destructible,
-  readability-ambiguous-smartptr-reset-call,
-  readability-avoid-nested-conditional-operator,
-  readability-avoid-return-with-void-value,
-  readability-braces-around-statements,
-  readability-const-return-type,
-  readability-container-contains,
-  readability-container-size-empty,
-  readability-convert-member-functions-to-static,
-  readability-duplicate-include,
-  readability-else-after-return,
-  readability-enum-initial-value,
-  readability-identifier-naming,
-  readability-implicit-bool-conversion,
-  readability-make-member-function-const,
-  readability-math-missing-parentheses,
-  readability-misleading-indentation,
-  readability-non-const-parameter,
-  readability-redundant-casting,
-  readability-redundant-declaration,
-  readability-redundant-inline-specifier,
-  readability-redundant-member-init,
-  readability-redundant-string-init,
-  readability-reference-to-constructed-temporary,
-  readability-simplify-boolean-expr,
-  readability-static-definition-in-anonymous-namespace,
-  readability-suspicious-call-argument,
-  readability-use-std-min-max
+
+  misc-*,
+  -misc-multiple-inheritance,
+  -misc-no-recursion,
+  -misc-non-private-member-variables-in-classes,
+  -misc-override-with-different-visibility,
+  -misc-unused-parameters,
+  -misc-use-anonymous-namespace,
+  -misc-use-internal-linkage,
+
+  modernize-*,
+  -modernize-avoid-c-arrays,
+  -modernize-avoid-c-style-cast,
+  -modernize-return-braced-init-list,
+  -modernize-use-integer-sign-comparison,
+  -modernize-use-trailing-return-type,
+
+  performance-*,
+  -performance-avoid-endl,
+  -performance-enum-size,
+  -performance-noexcept-move-constructor,
+  -performance-unnecessary-copy-initialization,
+  -performance-unnecessary-value-param,
+
+  readability-*,
+  -readability-avoid-const-params-in-decls,
+  -readability-container-data-pointer,
+  -readability-function-cognitive-complexity,
+  -readability-identifier-length,
+  -readability-inconsistent-declaration-parameter-name,
+  -readability-isolate-declaration,
+  -readability-magic-numbers,
+  -readability-named-parameter,
+  -readability-qualified-auto,
+  -readability-redundant-access-specifiers,
+  -readability-static-accessed-through-instance,
+  -readability-uppercase-literal-suffix
   "
 # ---
-# bugprone-narrowing-conversions,                      # this will break a lot of code but we should enable it in the future because it can eliminate a lot of bugs
-# readability-inconsistent-declaration-parameter-name, # in this codebase this check will break a lot of arg names
-# readability-static-accessed-through-instance,        # this check is probably unnecessary. it makes the code less readable
+# bugprone-narrowing-conversions,                      # This will break a lot of code but we should enable it in the future because it can eliminate a lot of bugs
+# misc-override-with-different-visibility,             # Will be addressed in a future PR, but for now it generates too many warnings
+# readability-inconsistent-declaration-parameter-name, # In this codebase this check will break a lot of arg names
+# readability-static-accessed-through-instance,        # this check is probably unnecessary. It makes the code less readable
 # ---
 
+FormatStyle: file
+
 CheckOptions:
   bugprone-unsafe-functions.ReportMoreUnsafeFunctions: true
   bugprone-unused-return-value.CheckedReturnTypes: ::std::error_code;::std::error_condition;::std::errc
 
-  misc-include-cleaner.IgnoreHeaders: ".*/(detail|impl)/.*;.*fwd\\.h(pp)?;time.h;stdlib.h;sqlite3.h;netinet/in\\.h;sys/resource\\.h;sys/sysinfo\\.h;linux/sysinfo\\.h;__chrono/.*;bits/.*;_abort\\.h;boost/uuid/uuid_hash.hpp;boost/beast/core/flat_buffer\\.hpp;boost/beast/http/field\\.hpp;boost/beast/http/dynamic_body\\.hpp;boost/beast/http/message\\.hpp;boost/beast/http/read\\.hpp;boost/beast/http/write\\.hpp;openssl/obj_mac\\.h"
+  misc-include-cleaner.IgnoreHeaders: ".*/(detail|impl)/.*;.*fwd\\.h(pp)?;time.h;stdlib.h;sqlite3.h;netinet/in\\.h;sys/resource\\.h;sys/sysinfo\\.h;linux/sysinfo\\.h;__chrono/.*;bits/.*;_abort\\.h;boost/.*;openssl/obj_mac\\.h"
 
   readability-braces-around-statements.ShortStatementLines: 2
   readability-identifier-naming.MacroDefinitionCase: UPPER_CASE
+  readability-identifier-naming.NamespaceCase: lower_case
+  readability-identifier-naming.InlineNamespaceCase: lower_case
   readability-identifier-naming.ClassCase: CamelCase
   readability-identifier-naming.StructCase: CamelCase
   readability-identifier-naming.UnionCase: CamelCase

.cspell.config.yaml

@@ -30,15 +30,15 @@ ignoreRegExpList:
   - ABCDEFGHIJKLMNOPQRSTUVWXYZ
   - ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
 overrides:
-  - filename: "**/*_test.cpp" # all test files
+  - filename:
+      - "**/*_test.cpp" # legacy boost.test files
+      - "src/tests/**/*.cpp" # gtest test files
     ignoreRegExpList:
       - /"[^"]*"/g # double-quoted strings
       - /'[^']*'/g # single-quoted strings
       - /`[^`]*`/g # backtick strings
 suggestWords:
-  - xprl->xrpl
-  - xprld->xrpld # cspell: disable-line not sure what this problem is....
-  - unsynched->unsynced # cspell: disable-line not sure what this problem is....
+  - unsynched->unsynced
   - synched->synced
   - synch->sync
 words:
@@ -50,6 +50,7 @@ words:
   - AMMXRP
   - amt
   - amts
+  - archs
   - asnode
   - asynchrony
   - attestation
@@ -59,12 +60,14 @@ words:
   - autobridging
   - bimap
   - bindir
+  - blindings
   - bookdir
   - Bougalis
   - Britto
   - Btrfs
   - Buildx
   - canonicality
+  - canonicalised
   - changespq
   - checkme
   - choco
@@ -72,6 +75,7 @@ words:
   - citardauq
   - clawback
   - clawbacks
+  - clippy
   - cmaketoolchain
   - coeffs
   - coldwallet
@@ -83,6 +87,7 @@ words:
   - coro
   - coros
   - cowid
+  - cpack
   - cryptocondition
   - cryptoconditional
   - cryptoconditions
@@ -93,6 +98,7 @@ words:
   - daria
   - dcmake
   - dearmor
+  - decryptor
   - dedented
   - deleteme
   - demultiplexer
@@ -104,9 +110,11 @@ words:
   - distro
   - doxyfile
   - dxrpl
+  - elgamal
   - enabled
   - enablerepo
   - endmacro
+  - envrc
   - exceptioned
   - EXPECT_STREQ
   - Falco
@@ -116,6 +124,7 @@ words:
   - fmtdur
   - fsanitize
   - funclets
+  - Gamal
   - gcov
   - gcovr
   - ghead
@@ -123,6 +132,7 @@ words:
   - godexsoft
   - gpgcheck
   - gpgkey
+  - Hinnant
   - hotwallet
   - hwaddress
   - hwrap
@@ -134,6 +144,7 @@ words:
   - iou
   - ious
   - isrdc
+  - isystem
   - itype
   - jemalloc
   - jlog
@@ -155,6 +166,7 @@ words:
   - llection
   - LOCALGOOD
   - logwstream
+  - Lombrozo
   - lseq
   - lsmf
   - ltype
@@ -164,7 +176,6 @@ words:
   - MPTAMM
   - MPTDEX
   - Merkle
-  - Metafuncton
   - misprediction
   - missingok
   - mptbalance
@@ -192,6 +203,7 @@ words:
   - nftokens
   - nftpage
   - nikb
+  - Nikolaos
   - nixfmt
   - nixos
   - nixpkgs
@@ -208,10 +220,12 @@ words:
   - Nyffenegger
   - onlatest
   - ostr
+  - oxalica
   - pargs
   - partitioner
   - paychan
   - paychans
+  - Pedersen
   - permdex
   - perminute
   - permissioned
@@ -230,9 +244,28 @@ words:
   - pyenv
   - pyparsing
   - qalloc
+  - qbsprofile
   - queuable
+  - parameterise
+  - parameterises
+  - parameterised
   - Raphson
+  - rcflags
+  - recognise
+  - recognises
+  - recognised
+  - renormalise
+  - renormalises
+  - renormalised
+  - renormalisation
+  - reserialise
+  - reserialises
+  - reserialised
   - replayer
+  - rerandomize
+  - rerandomization
+  - rerandomized
+  - rerandomizes
   - rerere
   - retriable
   - RIPD
@@ -246,9 +279,13 @@ words:
   - rocksdb
   - Rohrs
   - roundings
+  - rustc
+  - rustfmt
+  - rustup
   - sahyadri
   - Satoshi
   - scons
+  - Schnorr
   - secp
   - sendq
   - seqit
@@ -265,6 +302,8 @@ words:
   - sles
   - soci
   - socidb
+  - sponsee
+  - sponsees
   - SRPMS
   - sslws
   - statsd
@@ -279,12 +318,15 @@ words:
   - stvar
   - stvector
   - stxchainattestations
+  - summands
   - superpeer
   - superpeers
   - takergets
   - takerpays
   - ters
   - TMEndpointv2
+  - toolchain
+  - tparam
   - trixie
   - tx
   - txid
@@ -295,6 +337,7 @@ words:
   - txs
   - ubsan
   - UBSAN
+  - ufdio
   - umant
   - unacquired
   - unambiguity
@@ -311,9 +354,11 @@ words:
   - unserviced
   - unshareable
   - unshares
+  - unsponsored
   - unsquelch
   - unsquelched
   - unsquelching
+  - unsuffixed
   - unvalidated
   - unveto
   - unvetoed
@@ -333,6 +378,7 @@ words:
   - xchain
   - ximinez
   - XMACRO
+  - xored
   - xrpkuwait
   - xrpl
   - xrpld

.envrc

@@ -0,0 +1,7 @@
+watch_file nix/*.nix
+
+# The dev shell derivation includes all of conan/ (see nix/devshell.nix), so any
+# change in there has to invalidate direnv's cached environment.
+watch_dir conan
+
+use flake

.gersemi/definitions.cmake

@@ -11,7 +11,7 @@ endfunction()
 function(create_symbolic_link target link)
 endfunction()
 
-function(xrpl_add_test name)
+function(xrpl_add_benchmark name)
 endfunction()
 
 macro(exclude_from_default target_)
@@ -51,6 +51,12 @@ endfunction()
 function(add_module parent name)
 endfunction()
 
+function(verify_target_headers target headers_dir)
+endfunction()
+
+function(_verify_add_headers target dir)
+endfunction()
+
 function(setup_protocol_autogen)
 endfunction()
 
@@ -99,3 +105,6 @@ function(verbose_find_path variable name)
         ${ARGN}
     )
 endfunction()
+
+function(patch_nix_binary target)
+endfunction()

.github/actions/build-deps/action.yml

@@ -35,9 +35,8 @@ runs:
         LOG_VERBOSITY: ${{ inputs.log_verbosity }}
         SANITIZERS: ${{ inputs.sanitizers }}
       run: |
-        echo 'Installing dependencies.'
         conan install \
-            --profile ci \
+            --profile:all ci \
             --build="${BUILD_OPTION}" \
             --options:host='&:tests=True' \
             --options:host='&:xrpld=True' \

.github/actions/set-compiler-env/action.yml

@@ -0,0 +1,34 @@
+name: Set compiler environment
+description: "Set CC and CXX environment variables for the given compiler."
+
+inputs:
+  compiler:
+    description: 'The compiler to use ("gcc" or "clang").'
+    required: true
+
+runs:
+  using: composite
+
+  steps:
+    - name: Set CC and CXX for gcc
+      if: ${{ inputs.compiler == 'gcc' }}
+      shell: bash
+      run: |
+        echo "CC=gcc" >>"${GITHUB_ENV}"
+        echo "CXX=g++" >>"${GITHUB_ENV}"
+
+    - name: Set CC and CXX for clang
+      if: ${{ inputs.compiler == 'clang' }}
+      shell: bash
+      run: |
+        echo "CC=clang" >>"${GITHUB_ENV}"
+        echo "CXX=clang++" >>"${GITHUB_ENV}"
+
+    - name: Fail on unknown compiler
+      if: ${{ inputs.compiler != 'gcc' && inputs.compiler != 'clang' }}
+      shell: bash
+      env:
+        COMPILER: ${{ inputs.compiler }}
+      run: |
+        echo "Unknown compiler: $COMPILER" >&2
+        exit 1

.github/actions/setup-conan/action.yml

@@ -9,38 +9,41 @@ inputs:
   remote_url:
     description: "The URL of the Conan endpoint to use."
     required: false
-    default: https://conan.ripplex.io
+    default: https://conan.xrplf.org/repository/conan/
 
 runs:
   using: composite
 
   steps:
-    - name: Set up Conan configuration
+    - name: Apply custom configuration to global.conf
       shell: bash
       run: |
-        echo 'Installing configuration.'
         cat conan/global.conf ${{ runner.os == 'Linux' && '>>' || '>' }} $(conan config home)/global.conf
 
-        echo 'Conan configuration:'
-        conan config show '*'
-
-    - name: Set up Conan profile
+    - name: Show global configuration
+      shell: bash
+      run: |
+        conan config show '*'
+
+    - name: Install profiles
       shell: bash
       run: |
-        echo 'Installing profile.'
         conan config install conan/profiles/ -tf $(conan config home)/profiles/
 
-        echo 'Conan profile:'
+    - name: Show CI profile
+      shell: bash
+      run: |
         conan profile show --profile ci
 
-    - name: Set up Conan remote
+    - name: Add a remote
       shell: bash
       env:
         REMOTE_NAME: ${{ inputs.remote_name }}
         REMOTE_URL: ${{ inputs.remote_url }}
       run: |
-        echo "Adding Conan remote '${REMOTE_NAME}' at '${REMOTE_URL}'."
         conan remote add --index 0 --force "${REMOTE_NAME}" "${REMOTE_URL}"
 
-        echo 'Listing Conan remotes.'
+    - name: List remotes
+      shell: bash
+      run: |
         conan remote list

.github/dependabot.yml

@@ -1,40 +1,12 @@
 version: 2
 updates:
   - package-ecosystem: github-actions
-    directory: /
-    schedule:
-      interval: weekly
-      day: monday
-      time: "04:00"
-      timezone: Etc/GMT
-    commit-message:
-      prefix: "ci: [DEPENDABOT] "
-    target-branch: develop
-
-  - package-ecosystem: github-actions
-    directory: .github/actions/build-deps/
-    schedule:
-      interval: weekly
-      day: monday
-      time: "04:00"
-      timezone: Etc/GMT
-    commit-message:
-      prefix: "ci: [DEPENDABOT] "
-    target-branch: develop
-
-  - package-ecosystem: github-actions
-    directory: .github/actions/generate-version/
-    schedule:
-      interval: weekly
-      day: monday
-      time: "04:00"
-      timezone: Etc/GMT
-    commit-message:
-      prefix: "ci: [DEPENDABOT] "
-    target-branch: develop
-
-  - package-ecosystem: github-actions
-    directory: .github/actions/setup-conan/
+    directories:
+      - /
+      - .github/actions/build-deps/
+      - .github/actions/generate-version/
+      - .github/actions/set-compiler-env/
+      - .github/actions/setup-conan/
     schedule:
       interval: weekly
       day: monday
@@ -43,3 +15,7 @@ updates:
     commit-message:
       prefix: "ci: [DEPENDABOT] "
     target-branch: develop
+    groups:
+      github-actions:
+        patterns:
+          - "*"

.github/pull_request_template.md

@@ -1,10 +1,10 @@
 <!--
-This PR template helps you to write a good pull request description.
+This PR template helps you write a good pull request description.
 Please feel free to include additional useful information even beyond what is requested below.
 
 If your branch is on a personal fork and has a name that allows it to
 run CI build/test jobs (e.g. "ci/foo"), remember to rename it BEFORE
-opening the PR.  This avoids unnecessary redundant test runs. Renaming
+opening the PR. This avoids redundant test runs. Renaming
 the branch after opening the PR will close the PR.
 https://docs.github.com/en/repositories/configuring-branches-and-merges-in-your-repository/managing-branches-in-your-repository/renaming-a-branch
 -->
@@ -15,7 +15,7 @@ https://docs.github.com/en/repositories/configuring-branches-and-merges-in-your-
 Please include a summary of the changes.
 This may be a direct input to the release notes.
 If too broad, please consider splitting into multiple PRs.
-If a relevant task or issue, please link it here.
+If there is a relevant task or issue, please link it here.
 -->
 
 ### Context of Change
@@ -65,5 +65,5 @@ This section may not be needed if your change includes thoroughly commented unit
 
 <!--
 ## Future Tasks
-For future tasks related to PR.
+For future tasks related to this PR.
 -->

.github/scripts/levelization/README.md

@@ -40,18 +40,18 @@ listed later.
 | 04           | xrpl/protocol                       |
 | 05           | xrpl/core xrpl/resource xrpl/server |
 | 06           | xrpl/ledger xrpl/nodestore xrpl/net |
-| 07           | xrpl/shamap                         |
+| 07           | xrpl/shamap xrpl/consensus          |
 
 ## xrpld Modules (Application Implementation)
 
-| Level / Tier | Module(s)                        |
-| ------------ | -------------------------------- |
-| 05           | xrpld/conditions xrpld/consensus |
-| 06           | xrpld/core xrpld/peerfinder      |
-| 07           | xrpld/shamap xrpld/overlay       |
-| 08           | xrpld/app                        |
-| 09           | xrpld/rpc                        |
-| 10           | xrpld/perflog                    |
+| Level / Tier | Module(s)                   |
+| ------------ | --------------------------- |
+| 05           | xrpld/conditions            |
+| 06           | xrpld/core xrpld/peerfinder |
+| 07           | xrpld/shamap xrpld/overlay  |
+| 08           | xrpld/app                   |
+| 09           | xrpld/rpc                   |
+| 10           | xrpld/perflog               |
 
 ## Test Modules
 

.github/scripts/levelization/results/loops.txt

@@ -1,15 +1,6 @@
-Loop: test.jtx test.toplevel
-  test.toplevel > test.jtx
-
-Loop: test.jtx test.unit_test
-  test.unit_test ~= test.jtx
-
 Loop: xrpld.app xrpld.overlay
   xrpld.app > xrpld.overlay
 
-Loop: xrpld.app xrpld.peerfinder
-  xrpld.peerfinder ~= xrpld.app
-
 Loop: xrpld.app xrpld.rpc
   xrpld.rpc > xrpld.app
 

.github/scripts/levelization/results/ordering.txt

@@ -1,6 +1,13 @@
+benchmarks.libxrpl > xrpl.basics
+benchmarks.libxrpl > xrpl.config
+benchmarks.libxrpl > xrpl.nodestore
 libxrpl.basics > xrpl.basics
 libxrpl.conditions > xrpl.basics
 libxrpl.conditions > xrpl.conditions
+libxrpl.config > xrpl.basics
+libxrpl.config > xrpl.config
+libxrpl.consensus > xrpl.basics
+libxrpl.consensus > xrpl.consensus
 libxrpl.core > xrpl.basics
 libxrpl.core > xrpl.core
 libxrpl.core > xrpl.json
@@ -16,13 +23,18 @@ libxrpl.ledger > xrpl.shamap
 libxrpl.net > xrpl.basics
 libxrpl.net > xrpl.net
 libxrpl.nodestore > xrpl.basics
+libxrpl.nodestore > xrpl.config
 libxrpl.nodestore > xrpl.json
 libxrpl.nodestore > xrpl.nodestore
 libxrpl.nodestore > xrpl.protocol
+libxrpl.peerfinder > xrpl.basics
+libxrpl.peerfinder > xrpl.peerfinder
+libxrpl.peerfinder > xrpl.protocol
 libxrpl.protocol > xrpl.basics
 libxrpl.protocol > xrpl.json
 libxrpl.protocol > xrpl.protocol
 libxrpl.rdb > xrpl.basics
+libxrpl.rdb > xrpl.config
 libxrpl.rdb > xrpl.core
 libxrpl.rdb > xrpl.rdb
 libxrpl.resource > xrpl.basics
@@ -30,6 +42,7 @@ libxrpl.resource > xrpl.json
 libxrpl.resource > xrpl.protocol
 libxrpl.resource > xrpl.resource
 libxrpl.server > xrpl.basics
+libxrpl.server > xrpl.config
 libxrpl.server > xrpl.core
 libxrpl.server > xrpl.json
 libxrpl.server > xrpl.protocol
@@ -51,9 +64,10 @@ libxrpl.tx > xrpl.tx
 test.app > test.jtx
 test.app > test.unit_test
 test.app > xrpl.basics
+test.app > xrpl.config
+test.app > xrpl.consensus
 test.app > xrpl.core
 test.app > xrpld.app
-test.app > xrpld.consensus
 test.app > xrpld.core
 test.app > xrpld.overlay
 test.app > xrpld.rpc
@@ -66,7 +80,6 @@ test.app > xrpl.server
 test.app > xrpl.shamap
 test.app > xrpl.tx
 test.basics > test.jtx
-test.basics > test.unit_test
 test.basics > xrpl.basics
 test.basics > xrpl.core
 test.basics > xrpld.rpc
@@ -75,13 +88,9 @@ test.basics > xrpl.protocol
 test.beast > xrpl.basics
 test.conditions > xrpl.basics
 test.conditions > xrpl.conditions
-test.consensus > test.csf
 test.consensus > test.jtx
-test.consensus > test.toplevel
-test.consensus > test.unit_test
 test.consensus > xrpl.basics
 test.consensus > xrpld.app
-test.consensus > xrpld.consensus
 test.consensus > xrpl.ledger
 test.consensus > xrpl.protocol
 test.consensus > xrpl.shamap
@@ -89,20 +98,18 @@ test.consensus > xrpl.tx
 test.core > test.jtx
 test.core > test.unit_test
 test.core > xrpl.basics
+test.core > xrpl.config
 test.core > xrpl.core
 test.core > xrpld.core
 test.core > xrpl.json
 test.core > xrpl.protocol
 test.core > xrpl.rdb
 test.core > xrpl.server
-test.csf > xrpl.basics
-test.csf > xrpld.consensus
-test.csf > xrpl.json
-test.csf > xrpl.ledger
-test.csf > xrpl.protocol
 test.json > test.jtx
 test.json > xrpl.json
+test.jtx > test.unit_test
 test.jtx > xrpl.basics
+test.jtx > xrpl.config
 test.jtx > xrpl.core
 test.jtx > xrpld.app
 test.jtx > xrpld.core
@@ -123,41 +130,33 @@ test.ledger > xrpl.json
 test.ledger > xrpl.ledger
 test.ledger > xrpl.protocol
 test.nodestore > test.jtx
-test.nodestore > test.unit_test
 test.nodestore > xrpl.basics
 test.nodestore > xrpld.core
 test.nodestore > xrpl.nodestore
-test.nodestore > xrpl.protocol
 test.nodestore > xrpl.rdb
 test.overlay > test.jtx
 test.overlay > test.unit_test
 test.overlay > xrpl.basics
+test.overlay > xrpl.config
 test.overlay > xrpld.app
 test.overlay > xrpld.core
 test.overlay > xrpld.overlay
-test.overlay > xrpld.peerfinder
 test.overlay > xrpl.json
 test.overlay > xrpl.nodestore
+test.overlay > xrpl.peerfinder
 test.overlay > xrpl.protocol
 test.overlay > xrpl.resource
 test.overlay > xrpl.server
 test.overlay > xrpl.shamap
-test.peerfinder > test.beast
-test.peerfinder > test.unit_test
-test.peerfinder > xrpl.basics
-test.peerfinder > xrpld.core
-test.peerfinder > xrpld.peerfinder
-test.peerfinder > xrpl.protocol
 test.protocol > test.jtx
 test.protocol > test.unit_test
 test.protocol > xrpl.basics
+test.protocol > xrpld.core
 test.protocol > xrpl.json
 test.protocol > xrpl.protocol
-test.resource > test.unit_test
-test.resource > xrpl.basics
-test.resource > xrpl.resource
 test.rpc > test.jtx
 test.rpc > xrpl.basics
+test.rpc > xrpl.config
 test.rpc > xrpl.core
 test.rpc > xrpld.app
 test.rpc > xrpld.core
@@ -172,43 +171,52 @@ test.rpc > xrpl.tx
 test.server > test.jtx
 test.server > test.unit_test
 test.server > xrpl.basics
+test.server > xrpl.config
 test.server > xrpld.app
 test.server > xrpld.core
 test.server > xrpl.json
 test.server > xrpl.protocol
 test.server > xrpl.server
-test.shamap > test.unit_test
-test.shamap > xrpl.basics
-test.shamap > xrpl.nodestore
-test.shamap > xrpl.protocol
-test.shamap > xrpl.shamap
-test.toplevel > test.csf
-test.toplevel > xrpl.json
 test.unit_test > xrpl.basics
 test.unit_test > xrpl.protocol
 tests.libxrpl > xrpl.basics
+tests.libxrpl > xrpl.config
+tests.libxrpl > xrpl.consensus
 tests.libxrpl > xrpl.core
 tests.libxrpl > xrpl.json
 tests.libxrpl > xrpl.ledger
 tests.libxrpl > xrpl.net
 tests.libxrpl > xrpl.nodestore
+tests.libxrpl > xrpl.peerfinder
 tests.libxrpl > xrpl.protocol
 tests.libxrpl > xrpl.protocol_autogen
+tests.libxrpl > xrpl.resource
 tests.libxrpl > xrpl.server
 tests.libxrpl > xrpl.shamap
 tests.libxrpl > xrpl.tx
 xrpl.conditions > xrpl.basics
 xrpl.conditions > xrpl.protocol
+xrpl.config > xrpl.basics
+xrpl.consensus > xrpl.basics
+xrpl.consensus > xrpl.json
+xrpl.consensus > xrpl.ledger
+xrpl.consensus > xrpl.protocol
 xrpl.core > xrpl.basics
 xrpl.core > xrpl.json
 xrpl.core > xrpl.protocol
 xrpl.json > xrpl.basics
 xrpl.ledger > xrpl.basics
+xrpl.ledger > xrpl.json
+xrpl.ledger > xrpl.nodestore
 xrpl.ledger > xrpl.protocol
 xrpl.ledger > xrpl.shamap
 xrpl.net > xrpl.basics
 xrpl.nodestore > xrpl.basics
+xrpl.nodestore > xrpl.config
+xrpl.nodestore > xrpl.json
 xrpl.nodestore > xrpl.protocol
+xrpl.peerfinder > xrpl.basics
+xrpl.peerfinder > xrpl.protocol
 xrpl.protocol > xrpl.basics
 xrpl.protocol > xrpl.json
 xrpl.protocol_autogen > xrpl.json
@@ -225,7 +233,6 @@ xrpl.server > xrpl.json
 xrpl.server > xrpl.protocol
 xrpl.server > xrpl.rdb
 xrpl.server > xrpl.resource
-xrpl.server > xrpl.shamap
 xrpl.shamap > xrpl.basics
 xrpl.shamap > xrpl.nodestore
 xrpl.shamap > xrpl.protocol
@@ -235,50 +242,56 @@ xrpl.tx > xrpl.ledger
 xrpl.tx > xrpl.protocol
 xrpld.app > test.unit_test
 xrpld.app > xrpl.basics
+xrpld.app > xrpl.config
+xrpld.app > xrpl.consensus
 xrpld.app > xrpl.core
-xrpld.app > xrpld.consensus
 xrpld.app > xrpld.core
 xrpld.app > xrpl.json
 xrpld.app > xrpl.ledger
 xrpld.app > xrpl.net
 xrpld.app > xrpl.nodestore
+xrpld.app > xrpl.peerfinder
 xrpld.app > xrpl.protocol
 xrpld.app > xrpl.rdb
 xrpld.app > xrpl.resource
 xrpld.app > xrpl.server
 xrpld.app > xrpl.shamap
 xrpld.app > xrpl.tx
-xrpld.consensus > xrpl.basics
-xrpld.consensus > xrpl.json
-xrpld.consensus > xrpl.ledger
-xrpld.consensus > xrpl.protocol
 xrpld.core > xrpl.basics
+xrpld.core > xrpl.config
 xrpld.core > xrpl.core
 xrpld.core > xrpl.net
 xrpld.core > xrpl.protocol
 xrpld.core > xrpl.rdb
 xrpld.overlay > xrpl.basics
+xrpld.overlay > xrpl.config
+xrpld.overlay > xrpl.consensus
 xrpld.overlay > xrpl.core
-xrpld.overlay > xrpld.consensus
 xrpld.overlay > xrpld.core
 xrpld.overlay > xrpld.peerfinder
 xrpld.overlay > xrpl.json
 xrpld.overlay > xrpl.ledger
+xrpld.overlay > xrpl.peerfinder
 xrpld.overlay > xrpl.protocol
 xrpld.overlay > xrpl.resource
 xrpld.overlay > xrpl.server
 xrpld.overlay > xrpl.shamap
 xrpld.overlay > xrpl.tx
 xrpld.peerfinder > xrpl.basics
+xrpld.peerfinder > xrpld.app
 xrpld.peerfinder > xrpld.core
-xrpld.peerfinder > xrpl.protocol
+xrpld.peerfinder > xrpl.peerfinder
 xrpld.peerfinder > xrpl.rdb
 xrpld.perflog > xrpl.basics
+xrpld.perflog > xrpl.config
 xrpld.perflog > xrpl.core
+xrpld.perflog > xrpld.app
 xrpld.perflog > xrpld.rpc
 xrpld.perflog > xrpl.json
+xrpld.perflog > xrpl.nodestore
 xrpld.perflog > xrpl.protocol
 xrpld.rpc > xrpl.basics
+xrpld.rpc > xrpl.config
 xrpld.rpc > xrpl.core
 xrpld.rpc > xrpld.core
 xrpld.rpc > xrpl.json
@@ -293,5 +306,6 @@ xrpld.rpc > xrpl.shamap
 xrpld.rpc > xrpl.tx
 xrpld.shamap > xrpl.basics
 xrpld.shamap > xrpld.core
+xrpld.shamap > xrpl.nodestore
 xrpld.shamap > xrpl.protocol
 xrpld.shamap > xrpl.shamap

.github/scripts/rename/cmake.sh

@@ -43,9 +43,6 @@ pushd "${DIRECTORY}"
 # Rename the files.
 find cmake -type f -name 'Rippled*.cmake' -exec bash -c 'mv "${1}" "${1/Rippled/Xrpl}"' - {} \;
 find cmake -type f -name 'Ripple*.cmake' -exec bash -c 'mv "${1}" "${1/Ripple/Xrpl}"' - {} \;
-if [ -e cmake/xrpl_add_test.cmake ]; then
-    mv cmake/xrpl_add_test.cmake cmake/XrplAddTest.cmake
-fi
 if [ -e include/xrpl/proto/ripple.proto ]; then
     mv include/xrpl/proto/ripple.proto include/xrpl/proto/xrpl.proto
 fi
@@ -60,7 +57,6 @@ find cmake -type f -name '*.cmake' | while read -r FILE; do
 done
 ${SED_COMMAND} -i -E 's/Rippled?/Xrpl/g' CMakeLists.txt
 ${SED_COMMAND} -i 's/ripple/xrpl/g' CMakeLists.txt
-${SED_COMMAND} -i 's/include(xrpl_add_test)/include(XrplAddTest)/' src/tests/libxrpl/CMakeLists.txt
 ${SED_COMMAND} -i 's/ripple.pb.h/xrpl.pb.h/' include/xrpl/protocol/messages.h
 ${SED_COMMAND} -i 's/ripple.pb.h/xrpl.pb.h/' BUILD.md
 ${SED_COMMAND} -i 's/ripple.pb.h/xrpl.pb.h/' BUILD.md

.github/scripts/rename/namespace.sh

@@ -46,9 +46,6 @@ for DIRECTORY in "${DIRECTORIES[@]}"; do
     done
 done
 
-# Special case for NuDBFactory that has ripple twice in the test suite name.
-${SED_COMMAND} -i -E 's/(BEAST_DEFINE_TESTSUITE.+)ripple(.+)/\1xrpl\2/g' src/test/nodestore/NuDBFactory_test.cpp
-
 DIRECTORY=$1
 find "${DIRECTORY}" -type f -name "*.md" | while read -r FILE; do
     echo "Processing file: ${FILE}"

.github/scripts/strategy-matrix/generate.py

@@ -1,384 +1,321 @@
 #!/usr/bin/env python3
 import argparse
+import dataclasses
 import itertools
 import json
-from dataclasses import dataclass
 from pathlib import Path
 
 THIS_DIR = Path(__file__).parent.resolve()
 
+_BASE_CMAKE_ARGS = ["-Dtests=ON", "-Dwerr=ON", "-Dxrpld=ON", "-Dwextra=ON"]
 
-@dataclass
-class Config:
-    architecture: list[dict]
-    os: list[dict]
+# Maps sanitizer names (as used in cmake) to short config-name suffixes.
+_SANITIZER_SUFFIX: dict[str, str] = {
+    "address": "asan",
+    "undefinedbehavior": "ubsan",
+    "thread": "tsan",
+}
+
+
+def get_cmake_args(build_type: str, extra_args: str) -> str:
+    """Get the full list of CMake arguments for a config."""
+    args = _BASE_CMAKE_ARGS.copy()
+    if extra_args:
+        args.extend(extra_args.split())
+    return " ".join(args)
+
+
+# ---------------------------------------------------------------------------
+# Input types — shapes of the JSON config files
+# ---------------------------------------------------------------------------
+
+
+# Every config must declare 'minimal'. Minimal configs form the reduced matrix
+# built for pull requests by default; the full matrix adds the rest. Packaging
+# configs declare it too, but packaging is gated in the workflow, not by it.
+#
+# Configs may also opt into 'benchmark' to smoke-run the benchmarks. Note that
+# the flag applies to every entry a config expands into, so only set it on
+# configs that expand to a single combination.
+
+
+@dataclasses.dataclass
+class LinuxConfig:
+    """One entry in linux.json's 'configs' or 'package_configs' arrays."""
+
+    compiler: list[str]
     build_type: list[str]
-    cmake_args: list[str]
+    arch: list[str]
+    minimal: bool
+    benchmark: bool = False  # if true, smoke-run the benchmarks after testing
+    sanitizers: list[str] = dataclasses.field(default_factory=list)
+    suffix: str = ""
+    extra_cmake_args: str = ""
+    image: str = ""  # only used by package_configs entries
 
 
-"""
-Generate a strategy matrix for GitHub Actions CI.
+@dataclasses.dataclass
+class LinuxFile:
+    """Shape of linux.json."""
 
-On each PR commit we will build a selection of Debian, RHEL, Ubuntu, MacOS, and
-Windows configurations, while upon merge into the develop or release branches,
-we will build all configurations, and test most of them.
+    image_tag: str
+    configs: dict[str, list[LinuxConfig]]  # distro → configs
+    package_configs: dict[str, list[LinuxConfig]]  # distro → packaging configs
 
-We will further set additional CMake arguments as follows:
-- All builds will have the `tests`, `werr`, and `xrpld` options.
-- All builds will have the `wextra` option except for GCC 12 and Clang 16.
-- All release builds will have the `assert` option.
-- Certain Debian Bookworm configurations will change the reference fee, enable
-  codecov, and enable voidstar in PRs.
-"""
+    @classmethod
+    def load(cls, path: Path) -> "LinuxFile":
+        data = json.loads(path.read_text())
+
+        def parse(section: dict) -> dict[str, list[LinuxConfig]]:
+            return {
+                distro: [LinuxConfig(**c) for c in cfgs]
+                for distro, cfgs in section.items()
+            }
+
+        return cls(
+            image_tag=data["image_tag"],
+            configs=parse(data["configs"]),
+            package_configs=parse(data.get("package_configs", {})),
+        )
 
 
-def build_config_name(os_entry: dict[str, str], platform: str, build_type: str) -> str:
-    parts = [os_entry["distro_name"]]
-    for key in ("distro_version", "compiler_name", "compiler_version"):
-        if value := os_entry[key]:
-            parts.append(value)
-    parts.append("arm64" if "arm64" in platform else "amd64")
-    parts.append(build_type.lower())
-    return "-".join(parts)
+@dataclasses.dataclass
+class PlatformConfig:
+    """One entry in macos.json's or windows.json's 'configs' array."""
+
+    build_type: list[str]
+    minimal: bool
+    build_only: bool = False  # if true, skip tests (e.g. macos/Windows Debug)
+    benchmark: bool = False  # if true, smoke-run the benchmarks after testing
+    extra_cmake_args: str = ""
+
+    def __post_init__(self) -> None:
+        if isinstance(self.build_type, str):
+            self.build_type = [self.build_type]
 
 
-def generate_packaging_matrix(config: Config) -> list[dict]:
-    """Emit one entry per os entry with `package: true`. Architecture is
-    hardcoded to linux/amd64 here (and the runner is hardcoded at the
-    workflow level) until arm64 packaging is ready.
+@dataclasses.dataclass
+class PlatformFile:
+    """Shape of macos.json and windows.json."""
+
+    platform: str  # e.g. "macos/arm64" or "windows/amd64"
+    runner: list[str]  # GitHub Actions runner labels
+    configs: list[PlatformConfig]
+
+    @classmethod
+    def load(cls, path: Path) -> "PlatformFile":
+        data = json.loads(path.read_text())
+        return cls(
+            platform=data["platform"],
+            runner=data["runner"],
+            configs=[PlatformConfig(**c) for c in data["configs"]],
+        )
+
+
+# ---------------------------------------------------------------------------
+# Output types — shapes of the generated GitHub Actions matrix entries
+# ---------------------------------------------------------------------------
+
+
+@dataclasses.dataclass
+class Architecture:
+    platform: str
+    runner: list[str]
+
+
+@dataclasses.dataclass
+class MatrixEntry:
+    """One entry in the generated build/test strategy matrix."""
+
+    config_name: str
+    cmake_args: str
+    cmake_target: str
+    build_only: bool
+    benchmark: bool
+    build_type: str
+    architecture: Architecture
+    sanitizers: str
+    image: str = ""  # container image; empty for macOS/Windows (runs natively)
+    compiler: str = ""  # compiler name ("gcc" or "clang"); empty for macOS/Windows
+
+
+@dataclasses.dataclass
+class PackagingEntry:
+    """One entry in the generated packaging strategy matrix."""
+
+    xrpld_artifact_name: str
+    validator_keys_artifact_name: str
+    image: str
+    distro: str  # e.g. "debian" or "rhel"; drives package-format-specific steps
+
+
+# ---------------------------------------------------------------------------
+# Matrix expansion
+# ---------------------------------------------------------------------------
+
+_ARCHS: dict[str, Architecture] = {
+    "amd64": Architecture(
+        platform="linux/amd64", runner=["self-hosted", "Linux", "X64", "heavy"]
+    ),
+    "arm64": Architecture(
+        platform="linux/arm64",
+        runner=["self-hosted", "Linux", "ARM64", "heavy-arm64"],
+    ),
+}
+
+
+def expand_linux_matrix(linux: LinuxFile, minimal: bool) -> list[MatrixEntry]:
+    """Expand a LinuxFile into a flat list of matrix entries.
+
+    Each config entry is expanded over the cross-product of its
+    compiler, build_type, sanitizers, and architecture lists. When 'minimal' is
+    true, only configs flagged as minimal are included.
     """
-    return [
-        {
-            "artifact_name": f"xrpld-{build_config_name(os, 'linux/amd64', 'Release')}",
-            "os": os,
-        }
-        for os in config.os
-        if os.get("package", False)
-    ]
+    entries: list[MatrixEntry] = []
 
-
-def generate_strategy_matrix(all: bool, config: Config) -> list[dict]:
-    configurations = []
-    for architecture, os, build_type, cmake_args in itertools.product(
-        config.architecture, config.os, config.build_type, config.cmake_args
-    ):
-        # The default CMake target is 'all' for Linux and MacOS and 'install'
-        # for Windows, but it can get overridden for certain configurations.
-        cmake_target = "install" if os["distro_name"] == "windows" else "all"
-
-        # We build and test all configurations by default, except for Windows in
-        # Debug, because it is too slow, as well as when code coverage is
-        # enabled as that mode already runs the tests.
-        build_only = False
-        if os["distro_name"] == "windows" and build_type == "Debug":
-            build_only = True
-
-        # Only generate a subset of configurations in PRs.
-        if not all:
-            # Debian:
-            # - Bookworm using GCC 13: Debug on linux/amd64, set the reference
-            #   fee to 500 and enable code coverage (which will be done below).
-            # - Bookworm using GCC 15: Debug on linux/amd64, enable Address and
-            #   UB sanitizers (which will be done below).
-            # - Bookworm using Clang 16: Debug on linux/amd64, enable voidstar.
-            # - Bookworm using Clang 17: Release on linux/amd64, set the
-            #   reference fee to 1000.
-            # - Bookworm using Clang 20: Debug on linux/amd64, enable Address
-            #   and UB sanitizers (which will be done below).
-            if os["distro_name"] == "debian":
-                skip = True
-                if os["distro_version"] == "bookworm":
-                    if (
-                        f"{os['compiler_name']}-{os['compiler_version']}" == "gcc-13"
-                        and build_type == "Debug"
-                        and architecture["platform"] == "linux/amd64"
-                    ):
-                        cmake_args = f"-DUNIT_TEST_REFERENCE_FEE=500 {cmake_args}"
-                        skip = False
-                    if (
-                        f"{os['compiler_name']}-{os['compiler_version']}" == "gcc-15"
-                        and build_type == "Release"
-                        and architecture["platform"] == "linux/amd64"
-                    ):
-                        skip = False
-                    if (
-                        f"{os['compiler_name']}-{os['compiler_version']}" == "clang-16"
-                        and build_type == "Debug"
-                        and architecture["platform"] == "linux/amd64"
-                    ):
-                        cmake_args = f"-Dvoidstar=ON {cmake_args}"
-                        skip = False
-                    if (
-                        f"{os['compiler_name']}-{os['compiler_version']}" == "clang-17"
-                        and build_type == "Release"
-                        and architecture["platform"] == "linux/amd64"
-                    ):
-                        cmake_args = f"-DUNIT_TEST_REFERENCE_FEE=1000 {cmake_args}"
-                        skip = False
-                elif os["distro_version"] == "trixie":
-                    if (
-                        f"{os['compiler_name']}-{os['compiler_version']}" == "clang-22"
-                        and build_type == "Debug"
-                        and architecture["platform"] == "linux/amd64"
-                    ):
-                        skip = False
-                if skip:
-                    continue
-
-            # RHEL:
-            # - 9 using GCC 12: Debug and Release on linux/amd64
-            #   (Release is required for RPM packaging).
-            # - 10 using Clang: Release on linux/amd64.
-            if os["distro_name"] == "rhel":
-                skip = True
-                if os["distro_version"] == "9":
-                    if (
-                        f"{os['compiler_name']}-{os['compiler_version']}" == "gcc-12"
-                        and build_type in ["Debug", "Release"]
-                        and architecture["platform"] == "linux/amd64"
-                    ):
-                        skip = False
-                elif os["distro_version"] == "10":
-                    if (
-                        f"{os['compiler_name']}-{os['compiler_version']}" == "clang-any"
-                        and build_type == "Release"
-                        and architecture["platform"] == "linux/amd64"
-                    ):
-                        skip = False
-                if skip:
-                    continue
-
-            # Ubuntu:
-            # - Jammy using GCC 12: Debug on linux/arm64, Release on
-            #   linux/amd64 (Release is required for DEB packaging).
-            # - Noble using GCC 14: Release on linux/amd64.
-            # - Noble using Clang 18: Debug on linux/amd64.
-            # - Noble using Clang 19: Release on linux/arm64.
-            if os["distro_name"] == "ubuntu":
-                skip = True
-                if os["distro_version"] == "jammy":
-                    if (
-                        f"{os['compiler_name']}-{os['compiler_version']}" == "gcc-12"
-                        and build_type == "Debug"
-                        and architecture["platform"] == "linux/arm64"
-                    ):
-                        skip = False
-                    if (
-                        f"{os['compiler_name']}-{os['compiler_version']}" == "gcc-12"
-                        and build_type == "Release"
-                        and architecture["platform"] == "linux/amd64"
-                    ):
-                        skip = False
-                elif os["distro_version"] == "noble":
-                    if (
-                        f"{os['compiler_name']}-{os['compiler_version']}" == "gcc-14"
-                        and build_type == "Release"
-                        and architecture["platform"] == "linux/amd64"
-                    ):
-                        skip = False
-                    if (
-                        f"{os['compiler_name']}-{os['compiler_version']}" == "clang-18"
-                        and build_type == "Debug"
-                        and architecture["platform"] == "linux/amd64"
-                    ):
-                        skip = False
-                    if (
-                        f"{os['compiler_name']}-{os['compiler_version']}" == "clang-19"
-                        and build_type == "Release"
-                        and architecture["platform"] == "linux/arm64"
-                    ):
-                        skip = False
-                if skip:
-                    continue
-
-            # MacOS:
-            # - Debug on macos/arm64.
-            if os["distro_name"] == "macos" and not (
-                build_type == "Debug" and architecture["platform"] == "macos/arm64"
-            ):
+    for distro, configs in linux.configs.items():
+        for cfg in configs:
+            if minimal and not cfg.minimal:
                 continue
+            # An empty sanitizers list means "one entry with no sanitizer".
+            effective_sanitizers = cfg.sanitizers or [""]
+            effective_archs = {arch: _ARCHS[arch] for arch in cfg.arch}
 
-            # Windows:
-            # - Release on windows/amd64.
-            if os["distro_name"] == "windows" and not (
-                build_type == "Release" and architecture["platform"] == "windows/amd64"
+            for compiler, build_type, sanitizer, (arch, arch_info) in itertools.product(
+                cfg.compiler,
+                cfg.build_type,
+                effective_sanitizers,
+                effective_archs.items(),
             ):
-                continue
+                name = f"{distro}-{compiler}-{build_type.lower()}-{arch}"
+                suffix_parts = [
+                    s for s in [cfg.suffix, _SANITIZER_SUFFIX.get(sanitizer, "")] if s
+                ]
+                if suffix_parts:
+                    name += "-" + "-".join(suffix_parts)
 
-        # Additional CMake arguments.
-        cmake_args = f"{cmake_args} -Dtests=ON -Dwerr=ON -Dxrpld=ON"
-        if not f"{os['compiler_name']}-{os['compiler_version']}" in [
-            "gcc-12",
-            "clang-16",
-        ]:
-            cmake_args = f"{cmake_args} -Dwextra=ON"
-        if build_type == "Release":
-            cmake_args = f"{cmake_args} -Dassert=ON"
-
-        # We skip all RHEL on arm64 due to a build failure that needs further
-        # investigation.
-        if os["distro_name"] == "rhel" and architecture["platform"] == "linux/arm64":
-            continue
-
-        # We skip all clang 20+ on arm64 due to Boost build error.
-        if (
-            os["compiler_name"] == "clang"
-            and os["compiler_version"].isdigit()
-            and int(os["compiler_version"]) >= 20
-            and architecture["platform"] == "linux/arm64"
-        ):
-            continue
-
-        # Enable code coverage for Debian Bookworm using GCC 13 in Debug on
-        # linux/amd64.
-        if (
-            f"{os['distro_name']}-{os['distro_version']}" == "debian-bookworm"
-            and f"{os['compiler_name']}-{os['compiler_version']}" == "gcc-13"
-            and build_type == "Debug"
-            and architecture["platform"] == "linux/amd64"
-        ):
-            cmake_args = f"{cmake_args} -Dcoverage=ON -Dcoverage_format=xml -DCODE_COVERAGE_VERBOSE=ON -DCMAKE_C_FLAGS=-O0 -DCMAKE_CXX_FLAGS=-O0"
-
-        # Enable unity build for Ubuntu Jammy using GCC 12 in Debug on
-        # linux/amd64.
-        if (
-            f"{os['distro_name']}-{os['distro_version']}" == "ubuntu-jammy"
-            and f"{os['compiler_name']}-{os['compiler_version']}" == "gcc-12"
-            and build_type == "Debug"
-            and architecture["platform"] == "linux/amd64"
-        ):
-            cmake_args = f"{cmake_args} -Dunity=ON"
-
-        # Generate a unique name for the configuration, e.g. macos-arm64-debug
-        # or debian-bookworm-gcc-12-amd64-release.
-        config_name = build_config_name(os, architecture["platform"], build_type)
-        if "-Dcoverage=ON" in cmake_args:
-            config_name += "-coverage"
-        if "-Dunity=ON" in cmake_args:
-            config_name += "-unity"
-
-        # Add the configuration to the list, with the most unique fields first,
-        # so that they are easier to identify in the GitHub Actions UI, as long
-        # names get truncated.
-        # Add Address and UB sanitizers as separate configurations for specific
-        # bookworm distros. Thread sanitizer is currently disabled (see below).
-        # GCC-Asan xrpld-embedded tests are failing because of https://github.com/google/sanitizers/issues/856
-        if (
-            os["distro_version"] == "bookworm"
-            and f"{os['compiler_name']}-{os['compiler_version']}" == "gcc-15"
-        ) or (
-            os["distro_version"] == "trixie"
-            and f"{os['compiler_name']}-{os['compiler_version']}" == "clang-22"
-        ):
-            # Add ASAN and UBSAN configurations for both gcc-15 and clang-22
-            configurations.append(
-                {
-                    "config_name": config_name + "-asan",
-                    "cmake_args": cmake_args,
-                    "cmake_target": cmake_target,
-                    "build_only": build_only,
-                    "build_type": build_type,
-                    "os": os,
-                    "architecture": architecture,
-                    "sanitizers": "address",
-                }
-            )
-            configurations.append(
-                {
-                    "config_name": config_name + "-ubsan",
-                    "cmake_args": cmake_args,
-                    "cmake_target": cmake_target,
-                    "build_only": build_only,
-                    "build_type": build_type,
-                    "os": os,
-                    "architecture": architecture,
-                    "sanitizers": "undefinedbehavior",
-                }
-            )
-            # TSAN is deactivated due to seg faults with latest compilers.
-            activate_tsan = False
-            if activate_tsan:
-                configurations.append(
-                    {
-                        "config_name": config_name + "-tsan-ubsan",
-                        "cmake_args": cmake_args,
-                        "cmake_target": cmake_target,
-                        "build_only": build_only,
-                        "build_type": build_type,
-                        "os": os,
-                        "architecture": architecture,
-                        "sanitizers": "thread,undefinedbehavior",
-                    }
+                entries.append(
+                    MatrixEntry(
+                        config_name=name,
+                        image=f"ghcr.io/xrplf/xrpld/nix-{distro}:{linux.image_tag}",
+                        cmake_args=get_cmake_args(build_type, cfg.extra_cmake_args),
+                        cmake_target="all",
+                        build_only=False,
+                        benchmark=cfg.benchmark,
+                        build_type=build_type,
+                        architecture=arch_info,
+                        sanitizers=sanitizer,
+                        compiler=compiler,
+                    )
+                )
+
+    return entries
+
+
+def expand_linux_packaging(linux: LinuxFile) -> list[PackagingEntry]:
+    """Generate the packaging matrix from a LinuxFile's package_configs section.
+
+    Packaging uses vanilla distro images (debian:bookworm, ubi9, …) instead of
+    the nix-based build images, because deb/rpm tooling (debhelper, rpm-build)
+    is taken from the distro's archive rather than from nixpkgs. Each config
+    entry carries its own 'image'.
+
+    The artifact names must match what the build job uploads: one artifact per
+    binary, each named after the build config.
+    """
+    entries = []
+    for distro, configs in linux.package_configs.items():
+        for cfg in configs:
+            for compiler, build_type in itertools.product(cfg.compiler, cfg.build_type):
+                config_name = f"{distro}-{compiler}-{build_type.lower()}-amd64"
+                entries.append(
+                    PackagingEntry(
+                        xrpld_artifact_name=f"xrpld-{config_name}",
+                        validator_keys_artifact_name=f"validator-keys-{config_name}",
+                        image=cfg.image,
+                        distro=distro,
+                    )
+                )
+
+    return entries
+
+
+def expand_platform_matrix(pf: PlatformFile, minimal: bool) -> list[MatrixEntry]:
+    """Expand a PlatformFile (macOS or Windows) into matrix entries.
+
+    When 'minimal' is true, only configs flagged as minimal are included.
+    """
+    platform_name, arch = pf.platform.split("/")
+    is_windows = platform_name == "windows"
+
+    entries: list[MatrixEntry] = []
+    for cfg in pf.configs:
+        if minimal and not cfg.minimal:
+            continue
+        for build_type in cfg.build_type:
+            entries.append(
+                MatrixEntry(
+                    config_name=f"{platform_name}-{arch}-{build_type.lower()}",
+                    cmake_args=get_cmake_args(build_type, cfg.extra_cmake_args),
+                    cmake_target="install" if is_windows else "all",
+                    build_only=cfg.build_only,
+                    benchmark=cfg.benchmark,
+                    build_type=build_type,
+                    architecture=Architecture(platform=pf.platform, runner=pf.runner),
+                    sanitizers="",
                 )
-        else:
-            configurations.append(
-                {
-                    "config_name": config_name,
-                    "cmake_args": cmake_args,
-                    "cmake_target": cmake_target,
-                    "build_only": build_only,
-                    "build_type": build_type,
-                    "os": os,
-                    "architecture": architecture,
-                    "sanitizers": "",
-                }
             )
-
-    return configurations
+    return entries
 
 
-def read_config(file: Path) -> Config:
-    config = json.loads(file.read_text())
-    if (
-        config["architecture"] is None
-        or config["os"] is None
-        or config["build_type"] is None
-        or config["cmake_args"] is None
-    ):
-        raise Exception("Invalid configuration file.")
-
-    return Config(**config)
+# ---------------------------------------------------------------------------
+# Entry point
+# ---------------------------------------------------------------------------
 
 
 if __name__ == "__main__":
-    parser = argparse.ArgumentParser()
-    parser.add_argument(
-        "-a",
-        "--all",
-        help="Set to generate all configurations (generally used when merging a PR) or leave unset to generate a subset of configurations (generally used when committing to a PR).",
-        action="store_true",
+    parser = argparse.ArgumentParser(
+        description="Generate a CI strategy matrix for all platforms or a specific one."
     )
     parser.add_argument(
         "-c",
         "--config",
-        help="Path to the JSON file containing the strategy matrix configurations.",
-        required=False,
-        type=Path,
+        help="Platform to generate for ('linux', 'macos', or 'windows'). Defaults to all platforms.",
+        choices=["linux", "macos", "windows"],
+        default=None,
     )
     parser.add_argument(
         "-p",
         "--packaging",
-        help="Emit the packaging matrix (derived from the 'package' field on os entries) instead of the build/test matrix.",
+        help="Emit the Linux packaging matrix instead of the build/test matrix.",
+        action="store_true",
+    )
+    parser.add_argument(
+        "-m",
+        "--minimal",
+        help="Emit only the minimal matrix (the configs flagged 'minimal'), "
+        "used for pull requests by default. If omitted, the full matrix is "
+        "emitted.",
         action="store_true",
     )
     args = parser.parse_args()
 
-    matrix = []
-    if args.packaging:
-        config_path = args.config if args.config else THIS_DIR / "linux.json"
-        matrix += generate_packaging_matrix(read_config(config_path))
-    elif args.config is None or args.config == "":
-        matrix += generate_strategy_matrix(
-            args.all, read_config(THIS_DIR / "linux.json")
-        )
-        matrix += generate_strategy_matrix(
-            args.all, read_config(THIS_DIR / "macos.json")
-        )
-        matrix += generate_strategy_matrix(
-            args.all, read_config(THIS_DIR / "windows.json")
-        )
-    else:
-        matrix += generate_strategy_matrix(args.all, read_config(args.config))
+    matrix: list[MatrixEntry] | list[PackagingEntry] = []
 
-    # Generate the strategy matrix.
-    print(f"matrix={json.dumps({'include': matrix})}")
+    if args.packaging:
+        matrix = expand_linux_packaging(LinuxFile.load(THIS_DIR / "linux.json"))
+    else:
+        if args.config in ("linux", None):
+            matrix += expand_linux_matrix(
+                LinuxFile.load(THIS_DIR / "linux.json"), args.minimal
+            )
+        if args.config in ("macos", None):
+            matrix += expand_platform_matrix(
+                PlatformFile.load(THIS_DIR / "macos.json"), args.minimal
+            )
+        if args.config in ("windows", None):
+            matrix += expand_platform_matrix(
+                PlatformFile.load(THIS_DIR / "windows.json"), args.minimal
+            )
+
+    print(f"matrix={json.dumps({'include': [dataclasses.asdict(e) for e in matrix]})}")

.github/scripts/strategy-matrix/linux.json

@@ -1,221 +1,109 @@
 {
-  "architecture": [
-    {
-      "platform": "linux/amd64",
-      "runner": ["self-hosted", "Linux", "X64", "heavy"]
-    },
-    {
-      "platform": "linux/arm64",
-      "runner": ["self-hosted", "Linux", "ARM64", "heavy-arm64"]
-    }
-  ],
-  "os": [
-    {
-      "distro_name": "debian",
-      "distro_version": "bookworm",
-      "compiler_name": "gcc",
-      "compiler_version": "12",
-      "image_sha": "4c086b9"
-    },
-    {
-      "distro_name": "debian",
-      "distro_version": "bookworm",
-      "compiler_name": "gcc",
-      "compiler_version": "13",
-      "image_sha": "4c086b9"
-    },
-    {
-      "distro_name": "debian",
-      "distro_version": "bookworm",
-      "compiler_name": "gcc",
-      "compiler_version": "14",
-      "image_sha": "4c086b9"
-    },
-    {
-      "distro_name": "debian",
-      "distro_version": "bookworm",
-      "compiler_name": "gcc",
-      "compiler_version": "15",
-      "image_sha": "4c086b9"
-    },
-    {
-      "distro_name": "debian",
-      "distro_version": "bookworm",
-      "compiler_name": "clang",
-      "compiler_version": "16",
-      "image_sha": "4c086b9"
-    },
-    {
-      "distro_name": "debian",
-      "distro_version": "bookworm",
-      "compiler_name": "clang",
-      "compiler_version": "17",
-      "image_sha": "4c086b9"
-    },
-    {
-      "distro_name": "debian",
-      "distro_version": "bookworm",
-      "compiler_name": "clang",
-      "compiler_version": "18",
-      "image_sha": "4c086b9"
-    },
-    {
-      "distro_name": "debian",
-      "distro_version": "bookworm",
-      "compiler_name": "clang",
-      "compiler_version": "19",
-      "image_sha": "4c086b9"
-    },
-    {
-      "distro_name": "debian",
-      "distro_version": "bookworm",
-      "compiler_name": "clang",
-      "compiler_version": "20",
-      "image_sha": "4c086b9"
-    },
-    {
-      "distro_name": "debian",
-      "distro_version": "trixie",
-      "compiler_name": "gcc",
-      "compiler_version": "14",
-      "image_sha": "4c086b9"
-    },
-    {
-      "distro_name": "debian",
-      "distro_version": "trixie",
-      "compiler_name": "gcc",
-      "compiler_version": "15",
-      "image_sha": "4c086b9"
-    },
-    {
-      "distro_name": "debian",
-      "distro_version": "trixie",
-      "compiler_name": "clang",
-      "compiler_version": "20",
-      "image_sha": "4c086b9"
-    },
-    {
-      "distro_name": "debian",
-      "distro_version": "trixie",
-      "compiler_name": "clang",
-      "compiler_version": "21",
-      "image_sha": "4c086b9"
-    },
-    {
-      "distro_name": "debian",
-      "distro_version": "trixie",
-      "compiler_name": "clang",
-      "compiler_version": "22",
-      "image_sha": "4c086b9"
-    },
-    {
-      "distro_name": "rhel",
-      "distro_version": "8",
-      "compiler_name": "gcc",
-      "compiler_version": "14",
-      "image_sha": "4c086b9"
-    },
-    {
-      "distro_name": "rhel",
-      "distro_version": "8",
-      "compiler_name": "clang",
-      "compiler_version": "any",
-      "image_sha": "4c086b9"
-    },
-    {
-      "distro_name": "rhel",
-      "distro_version": "9",
-      "compiler_name": "gcc",
-      "compiler_version": "12",
-      "image_sha": "4c086b9",
-      "package": true
-    },
-    {
-      "distro_name": "rhel",
-      "distro_version": "9",
-      "compiler_name": "gcc",
-      "compiler_version": "13",
-      "image_sha": "4c086b9"
-    },
-    {
-      "distro_name": "rhel",
-      "distro_version": "9",
-      "compiler_name": "gcc",
-      "compiler_version": "14",
-      "image_sha": "4c086b9"
-    },
-    {
-      "distro_name": "rhel",
-      "distro_version": "9",
-      "compiler_name": "clang",
-      "compiler_version": "any",
-      "image_sha": "4c086b9"
-    },
-    {
-      "distro_name": "rhel",
-      "distro_version": "10",
-      "compiler_name": "gcc",
-      "compiler_version": "14",
-      "image_sha": "4c086b9"
-    },
-    {
-      "distro_name": "rhel",
-      "distro_version": "10",
-      "compiler_name": "clang",
-      "compiler_version": "any",
-      "image_sha": "4c086b9"
-    },
-    {
-      "distro_name": "ubuntu",
-      "distro_version": "jammy",
-      "compiler_name": "gcc",
-      "compiler_version": "12",
-      "image_sha": "4c086b9",
-      "package": true
-    },
-    {
-      "distro_name": "ubuntu",
-      "distro_version": "noble",
-      "compiler_name": "gcc",
-      "compiler_version": "13",
-      "image_sha": "4c086b9"
-    },
-    {
-      "distro_name": "ubuntu",
-      "distro_version": "noble",
-      "compiler_name": "gcc",
-      "compiler_version": "14",
-      "image_sha": "4c086b9"
-    },
-    {
-      "distro_name": "ubuntu",
-      "distro_version": "noble",
-      "compiler_name": "clang",
-      "compiler_version": "16",
-      "image_sha": "4c086b9"
-    },
-    {
-      "distro_name": "ubuntu",
-      "distro_version": "noble",
-      "compiler_name": "clang",
-      "compiler_version": "17",
-      "image_sha": "4c086b9"
-    },
-    {
-      "distro_name": "ubuntu",
-      "distro_version": "noble",
-      "compiler_name": "clang",
-      "compiler_version": "18",
-      "image_sha": "4c086b9"
-    },
-    {
-      "distro_name": "ubuntu",
-      "distro_version": "noble",
-      "compiler_name": "clang",
-      "compiler_version": "19",
-      "image_sha": "4c086b9"
-    }
-  ],
-  "build_type": ["Debug", "Release"],
-  "cmake_args": [""]
+  "image_tag": "sha-fecfc0c",
+  "configs": {
+    "ubuntu": [
+      {
+        "compiler": ["gcc"],
+        "build_type": ["Debug"],
+        "arch": ["amd64"],
+        "minimal": true,
+        "suffix": "coverage",
+        "extra_cmake_args": "-DUNIT_TEST_REFERENCE_FEE=500 -Dcoverage=ON -Dcoverage_format=xml -DCODE_COVERAGE_VERBOSE=ON -DCMAKE_C_FLAGS=-O0 -DCMAKE_CXX_FLAGS=-O0"
+      },
+      {
+        "compiler": ["clang"],
+        "build_type": ["Release"],
+        "arch": ["amd64"],
+        "minimal": true,
+        "benchmark": true
+      },
+
+      {
+        "compiler": ["gcc"],
+        "build_type": ["Release"],
+        "arch": ["amd64"],
+        "minimal": false
+      },
+      {
+        "compiler": ["gcc", "clang"],
+        "build_type": ["Debug", "Release"],
+        "arch": ["arm64"],
+        "minimal": false
+      },
+
+      {
+        "compiler": ["gcc", "clang"],
+        "build_type": ["Debug", "Release"],
+        "arch": ["amd64"],
+        "minimal": false,
+        "sanitizers": ["address", "undefinedbehavior"]
+      },
+
+      {
+        "compiler": ["clang"],
+        "build_type": ["Debug"],
+        "arch": ["amd64"],
+        "minimal": false,
+        "suffix": "voidstar",
+        "extra_cmake_args": "-Dvoidstar=ON"
+      },
+      {
+        "compiler": ["clang"],
+        "build_type": ["Release"],
+        "arch": ["amd64"],
+        "minimal": false,
+        "suffix": "reffee",
+        "extra_cmake_args": "-DUNIT_TEST_REFERENCE_FEE=1000"
+      },
+      {
+        "compiler": ["gcc"],
+        "build_type": ["Debug"],
+        "arch": ["amd64"],
+        "minimal": false,
+        "suffix": "unity",
+        "extra_cmake_args": "-Dunity=ON"
+      }
+    ],
+
+    "debian": [
+      {
+        "compiler": ["gcc"],
+        "build_type": ["Release"],
+        "arch": ["amd64"],
+        "minimal": false,
+        "extra_cmake_args": "-Dvalidator_keys=ON"
+      }
+    ],
+
+    "rhel": [
+      {
+        "compiler": ["gcc"],
+        "build_type": ["Release"],
+        "arch": ["amd64"],
+        "minimal": false,
+        "extra_cmake_args": "-Dvalidator_keys=ON"
+      }
+    ]
+  },
+  "package_configs": {
+    "debian": [
+      {
+        "compiler": ["gcc"],
+        "build_type": ["Release"],
+        "arch": ["amd64"],
+        "minimal": false,
+        "image": "ghcr.io/xrplf/xrpld/packaging-debian:sha-577d745"
+      }
+    ],
+
+    "rhel": [
+      {
+        "compiler": ["gcc"],
+        "build_type": ["Release"],
+        "arch": ["amd64"],
+        "minimal": false,
+        "image": "ghcr.io/xrplf/xrpld/packaging-rhel:sha-577d745"
+      }
+    ]
+  }
 }

.github/scripts/strategy-matrix/macos.json

@@ -1,19 +1,17 @@
 {
-  "architecture": [
+  "platform": "macos/arm64",
+  "runner": ["self-hosted", "macOS", "ARM64", "macos-26-apple-clang-21"],
+  "configs": [
     {
-      "platform": "macos/arm64",
-      "runner": ["self-hosted", "macOS", "ARM64", "mac-runner-m1"]
-    }
-  ],
-  "os": [
+      "build_type": "Release",
+      "extra_cmake_args": "-DCMAKE_POLICY_VERSION_MINIMUM=3.5",
+      "minimal": true
+    },
     {
-      "distro_name": "macos",
-      "distro_version": "",
-      "compiler_name": "",
-      "compiler_version": "",
-      "image_sha": ""
+      "build_type": "Debug",
+      "extra_cmake_args": "-DCMAKE_POLICY_VERSION_MINIMUM=3.5",
+      "build_only": true,
+      "minimal": false
     }
-  ],
-  "build_type": ["Debug", "Release"],
-  "cmake_args": ["-DCMAKE_POLICY_VERSION_MINIMUM=3.5"]
+  ]
 }

.github/scripts/strategy-matrix/windows.json

@@ -1,19 +1,12 @@
 {
-  "architecture": [
+  "platform": "windows/amd64",
+  "runner": ["self-hosted", "Windows", "dev-box-windows-2026"],
+  "configs": [
+    { "build_type": "Release", "minimal": true },
     {
-      "platform": "windows/amd64",
-      "runner": ["self-hosted", "Windows", "devbox"]
+      "build_type": "Debug",
+      "build_only": true,
+      "minimal": false
     }
-  ],
-  "os": [
-    {
-      "distro_name": "windows",
-      "distro_version": "",
-      "compiler_name": "",
-      "compiler_version": "",
-      "image_sha": ""
-    }
-  ],
-  "build_type": ["Debug", "Release"],
-  "cmake_args": [""]
+  ]
 }

.github/workflows/build-nix-image.yml

@@ -1,109 +0,0 @@
-name: Build Nix Docker image
-
-on:
-  push:
-    branches:
-      - develop
-    paths:
-      - ".github/workflows/build-nix-image.yml"
-      - ".github/workflows/reusable-build-docker-image.yml"
-      - "docker/**"
-      - "flake.nix"
-      - "flake.lock"
-      - "nix/**"
-  pull_request:
-    paths:
-      - ".github/workflows/build-nix-image.yml"
-      - ".github/workflows/reusable-build-docker-image.yml"
-      - "docker/**"
-      - "flake.nix"
-      - "flake.lock"
-      - "nix/**"
-  workflow_dispatch:
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-
-defaults:
-  run:
-    shell: bash
-
-jobs:
-  build:
-    name: Build ${{ matrix.distro.name }} (${{ matrix.target.platform }})
-    permissions:
-      contents: read
-      packages: write
-    strategy:
-      fail-fast: false
-      matrix:
-        # The base images are the oldest supported version of each distro
-        # that we want to build images for.
-        distro:
-          - name: nixos
-            base_image: nixos/nix:latest
-          - name: ubuntu
-            base_image: ubuntu:20.04
-          - name: rhel
-            base_image: registry.access.redhat.com/ubi9/ubi:latest
-          - name: debian
-            base_image: debian:bookworm
-        target:
-          - platform: linux/amd64
-            runner: ubuntu-latest
-          - platform: linux/arm64
-            runner: ubuntu-24.04-arm
-    uses: ./.github/workflows/reusable-build-docker-image.yml
-    with:
-      image_name: ghcr.io/xrplf/xrpld/nix-${{ matrix.distro.name }}
-      dockerfile: docker/nix.Dockerfile
-      base_image: ${{ matrix.distro.base_image }}
-      platform: ${{ matrix.target.platform }}
-      runner: ${{ matrix.target.runner }}
-      push: ${{ github.repository == 'XRPLF/rippled' && github.event_name == 'push' }}
-
-  merge:
-    name: Merge ${{ matrix.distro }} manifest
-    needs: build
-    if: ${{ github.repository == 'XRPLF/rippled' && github.event_name == 'push' }}
-    runs-on: ubuntu-latest
-    permissions:
-      contents: read
-      packages: write
-    strategy:
-      fail-fast: false
-      matrix:
-        distro: [nixos, ubuntu, rhel, debian]
-    env:
-      IMAGE_NAME: ghcr.io/xrplf/xrpld/nix-${{ matrix.distro }}
-
-    steps:
-      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@d7f5e7f509e45cec5c76c4d5afdd7de93d0b3df5 # v4.1.0
-
-      - name: Docker metadata
-        id: meta
-        uses: docker/metadata-action@80c7e94dd9b9319bd5eb7a0e0fe9291e23a2a2e9 # v6.1.0
-        with:
-          images: ${{ env.IMAGE_NAME }}
-          tags: |
-            type=sha,prefix=sha-,format=short
-            type=raw,value=latest
-
-      - name: Login to GitHub Container Registry
-        uses: docker/login-action@650006c6eb7dba73a995cc03b0b2d7f5ca915bee # v4.2.0
-        with:
-          registry: ghcr.io
-          username: ${{ github.repository_owner }}
-          password: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Create multi-arch manifests
-        run: |
-          for tag in $(jq -cr '.tags[]' <<<"$DOCKER_METADATA_OUTPUT_JSON"); do
-              docker buildx imagetools create -t "$tag" "${tag}-amd64" "${tag}-arm64"
-          done
-
-      - name: Inspect image
-        run: |
-          docker buildx imagetools inspect "${IMAGE_NAME}:${{ steps.meta.outputs.version }}"

.github/workflows/build-nix-images.yml

@@ -0,0 +1,66 @@
+name: Build `nix` Docker images
+
+on:
+  push:
+    branches:
+      - develop
+    paths:
+      - ".github/workflows/build-nix-images.yml"
+      - "flake.nix"
+      - "flake.lock"
+      - "rust-toolchain.toml"
+      - "nix/**"
+      - "!nix/docker/README.md"
+      - "!nix/devshell.nix"
+      - "bin/check-tools.sh"
+      - "bin/default-loader-path.sh"
+      - "bin/install-sanitizer-libs.sh"
+  pull_request:
+    paths:
+      - ".github/workflows/build-nix-images.yml"
+      - "flake.nix"
+      - "flake.lock"
+      - "rust-toolchain.toml"
+      - "nix/**"
+      - "!nix/docker/README.md"
+      - "!nix/devshell.nix"
+      - "bin/check-tools.sh"
+      - "bin/default-loader-path.sh"
+      - "bin/install-sanitizer-libs.sh"
+  workflow_dispatch:
+
+concurrency:
+  # Read `on-trigger.yml` for the rationale behind this concurrency group name.
+  group: ${{ github.workflow }}-${{ github.event_name == 'push' && github.ref == 'refs/heads/develop' && github.sha || github.ref }}
+  cancel-in-progress: true
+
+defaults:
+  run:
+    shell: bash
+
+jobs:
+  build-merge:
+    name: Build and push `nix-${{ matrix.distro.name }}` image
+    permissions:
+      contents: read
+      packages: write
+    strategy:
+      fail-fast: false
+      matrix:
+        # The base images are the oldest supported version of each distro
+        # that we want to build images for.
+        distro:
+          - name: nixos
+            base_image: nixos/nix:latest
+          - name: ubuntu
+            base_image: ubuntu:20.04
+          - name: debian
+            base_image: debian:bookworm
+          - name: rhel
+            base_image: registry.access.redhat.com/ubi9/ubi:latest
+    uses: XRPLF/actions/.github/workflows/build-multiarch-image.yml@9e7e4e80af9e684c116b38369add8eea64451f32
+    with:
+      image_name: xrpld/nix-${{ matrix.distro.name }}
+      dockerfile: nix/docker/Dockerfile
+      base_image: ${{ matrix.distro.base_image }}
+      push: ${{ github.event_name == 'push' }}

.github/workflows/build-packaging-images.yml

@@ -0,0 +1,46 @@
+name: Build `packaging` Docker images
+
+on:
+  push:
+    branches:
+      - develop
+    paths:
+      - ".github/workflows/build-packaging-images.yml"
+      - "package/Dockerfile"
+      - "package/install-packaging-tools.sh"
+  pull_request:
+    paths:
+      - ".github/workflows/build-packaging-images.yml"
+      - "package/Dockerfile"
+      - "package/install-packaging-tools.sh"
+  workflow_dispatch:
+
+concurrency:
+  # Read `on-trigger.yml` for the rationale behind this concurrency group name.
+  group: ${{ github.workflow }}-${{ github.event_name == 'push' && github.ref == 'refs/heads/develop' && github.sha || github.ref }}
+  cancel-in-progress: true
+
+defaults:
+  run:
+    shell: bash
+
+jobs:
+  build-merge:
+    name: Build and push `packaging-${{ matrix.distro.name }}` image
+    permissions:
+      contents: read
+      packages: write
+    strategy:
+      fail-fast: false
+      matrix:
+        distro:
+          - name: debian
+            base_image: debian:bookworm
+          - name: rhel
+            base_image: registry.access.redhat.com/ubi9/ubi:latest
+    uses: XRPLF/actions/.github/workflows/build-multiarch-image.yml@9e7e4e80af9e684c116b38369add8eea64451f32
+    with:
+      image_name: xrpld/packaging-${{ matrix.distro.name }}
+      dockerfile: package/Dockerfile
+      base_image: ${{ matrix.distro.base_image }}
+      push: ${{ github.event_name == 'push' }}

.github/workflows/build-pre-commit-image.yml

@@ -0,0 +1,38 @@
+name: Build `pre-commit` Docker image
+
+on:
+  push:
+    branches:
+      - develop
+    paths:
+      - ".github/workflows/build-pre-commit-image.yml"
+      - "bin/pre-commit/Dockerfile"
+      - "rust-toolchain.toml"
+  pull_request:
+    paths:
+      - ".github/workflows/build-pre-commit-image.yml"
+      - "bin/pre-commit/Dockerfile"
+      - "rust-toolchain.toml"
+  workflow_dispatch:
+
+concurrency:
+  # Read `on-trigger.yml` for the rationale behind this concurrency group name.
+  group: ${{ github.workflow }}-${{ github.event_name == 'push' && github.ref == 'refs/heads/develop' && github.sha || github.ref }}
+  cancel-in-progress: true
+
+defaults:
+  run:
+    shell: bash
+
+jobs:
+  build-merge:
+    name: Build and push `pre-commit` image
+    permissions:
+      contents: read
+      packages: write
+    uses: XRPLF/actions/.github/workflows/build-multiarch-image.yml@9e7e4e80af9e684c116b38369add8eea64451f32
+    with:
+      image_name: xrpld/pre-commit
+      dockerfile: bin/pre-commit/Dockerfile
+      base_image: ubuntu:26.04
+      push: ${{ github.event_name == 'push' }}

.github/workflows/check-pr-description.yml

@@ -23,7 +23,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout repository
-        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
       - name: Write PR body to file
         env:

.github/workflows/check-pr-title.yml

@@ -20,4 +20,4 @@ on:
 jobs:
   check_title:
     if: ${{ github.event.pull_request.draft != true }}
-    uses: XRPLF/actions/.github/workflows/check-pr-title.yml@cba1f0891650baf1a9c88624dc2d72573be2eb81
+    uses: XRPLF/actions/.github/workflows/check-pr-title.yml@d7c65e49225a38f6d8010eacf017bb5a98d7476c

.github/workflows/check-tools.yml

@@ -0,0 +1,114 @@
+# Verifies the committed snapshots of `bin/check-tools.sh` output for each Nix
+# environment (see nix/check-tools/). If the environment changes — a new image
+# tag, an updated flake.lock, a different tool list — without the matching
+# snapshot being regenerated and committed, this workflow fails so the drift is
+# caught in review.
+#
+# To regenerate the snapshots, see nix/check-tools/README.md.
+name: Check tools
+
+on:
+  pull_request:
+    paths:
+      - ".github/workflows/check-tools.yml"
+      - ".github/scripts/strategy-matrix/linux.json"
+      - "bin/check-tools.sh"
+      - "nix/**"
+      - "flake.nix"
+      - "flake.lock"
+      - "rust-toolchain.toml"
+  push:
+    branches:
+      - "develop"
+    paths:
+      - ".github/workflows/check-tools.yml"
+      - ".github/scripts/strategy-matrix/linux.json"
+      - "bin/check-tools.sh"
+      - "nix/**"
+      - "flake.nix"
+      - "flake.lock"
+      - "rust-toolchain.toml"
+  workflow_dispatch:
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+defaults:
+  run:
+    shell: bash
+
+jobs:
+  # The nix-nixos image tag is pinned alongside the build matrix in linux.json,
+  # so snapshots are checked against the exact image CI builds against.
+  linux-image-tag:
+    runs-on: ubuntu-latest
+    outputs:
+      tag: ${{ steps.tag.outputs.tag }}
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+
+      - name: Read nix image tag
+        id: tag
+        run: echo "tag=$(jq -r .image_tag .github/scripts/strategy-matrix/linux.json)" >>"${GITHUB_OUTPUT}"
+
+  # One job for all environments; they differ only in whether the tools come
+  # from the nix-nixos container (Linux) or `nix develop` (macOS).
+  check-tools:
+    needs: linux-image-tag
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          - runner: ubuntu-latest
+            snapshot: nix/check-tools/nix-ubuntu-amd64.txt
+            nix_develop: false
+          - runner: ubuntu-24.04-arm
+            snapshot: nix/check-tools/nix-ubuntu-arm64.txt
+            nix_develop: false
+          - runner: macos-26-apple-clang-21
+            snapshot: nix/check-tools/macos.txt
+            nix_develop: true
+    runs-on: ${{ matrix.runner }}
+    # Linux runs inside the pinned nix-nixos image; macOS runs natively and uses
+    # the flake's dev shell instead (see the run step below).
+    container: ${{ !matrix.nix_develop && format('ghcr.io/xrplf/xrpld/nix-ubuntu:{0}', needs.linux-image-tag.outputs.tag) || null }}
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+
+      - name: Prepare runner
+        uses: XRPLF/actions/prepare-runner@c00c22ada3bd6bcda48fcb0d62fbbab49fec8a0f
+        with:
+          enable_ccache: false
+
+      - name: Regenerate snapshot
+        env:
+          CHECK_TOOLS_SKIP_CLONE: "1"
+          # check-tools.sh skips some macOS tools when CI is set; the snapshots
+          # capture the full `nix develop` environment, so unset it here.
+          CI: ""
+        run: |
+          if [ "${{ matrix.nix_develop }}" = "true" ]; then
+              # `nix develop` prints the dev-shell greeting first; keep only the
+              # check-tools.sh output (from the "Detected OS:" line onward).
+              nix --extra-experimental-features "nix-command flakes" develop \
+                  -c bash bin/check-tools.sh | sed -n '/^Detected OS:/,$p' >"${{ matrix.snapshot }}"
+          else
+              bash bin/check-tools.sh >"${{ matrix.snapshot }}"
+          fi
+
+      - name: Verify snapshot is up to date
+        run: |
+          if ! git diff --exit-code -- "${{ matrix.snapshot }}"; then
+              echo "::error::${{ matrix.snapshot }} is out of date. Regenerate it (see nix/check-tools/README.md) and commit the result."
+              exit 1
+          fi
+
+      - name: Upload regenerated snapshot
+        if: failure()
+        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+        with:
+          name: check-tools-${{ runner.os }}-${{ runner.arch }}
+          path: ${{ matrix.snapshot }}

.github/workflows/conflicting-pr.yml

@@ -14,10 +14,11 @@ permissions:
 
 jobs:
   main:
+    if: ${{ !contains(github.event.pull_request.labels.*.name, 'IgnoreConflicts') }}
     runs-on: ubuntu-latest
     steps:
       - name: Check if PRs are dirty
-        uses: eps1lon/actions-label-merge-conflict@1df065ebe6e3310545d4f4c4e862e43bdca146f0 # v3.0.3
+        uses: eps1lon/actions-label-merge-conflict@0273be72a0bbd58fcd71d0d6c02c209b50d1e5e1 # v3.1.0
         with:
           dirtyLabel: "PR: has conflicts"
           repoToken: "${{ secrets.GITHUB_TOKEN }}"

.github/workflows/on-pr.yml

@@ -1,7 +1,11 @@
-# This workflow runs all workflows to check, build and test the project on
-# various Linux flavors, as well as on MacOS and Windows, on every push to a
-# user branch. However, it will not run if the pull request is a draft unless it
-# has the 'DraftRunCI' label. For commits to PRs that target a release branch,
+# This workflow runs workflows to check, build and test the project
+# on every meaningful change on pull_request.
+# However, it will not run if the PR is a draft
+# unless it has the 'DraftRunCI' or 'Full CI build' label.
+#
+# By default a PR builds only a minimal matrix.
+# The full matrix runs once the PR is labeled "Ready to merge" or "Full CI build".
+# For commits to PRs that target a release branch,
 # it also uploads the libxrpl recipe to the Conan remote.
 name: PR
 
@@ -15,8 +19,16 @@ on:
       - reopened
       - synchronize
       - ready_for_review
+      # Trigger on label changes so toggling "Ready to merge" or "Full CI build"
+      # switches between the minimal and full matrix without needing a new push.
+      - labeled
+      - unlabeled
 
 concurrency:
+  # A single per-ref group with cancel-in-progress means any newer run (a push
+  # or a label change) supersedes the in-progress one for that ref. Keeping
+  # exactly one authoritative run per ref ensures a fast do-nothing run can never
+  # mask a real build's checks.
   group: ${{ github.workflow }}-${{ github.ref }}
   cancel-in-progress: true
 
@@ -25,15 +37,22 @@ defaults:
     shell: bash
 
 jobs:
-  # This job determines whether the rest of the workflow should run. It runs
-  # when the PR is not a draft (which should also cover merge-group) or
-  # has the 'DraftRunCI' label.
+  # This job determines whether the rest of the workflow should run at all,
+  # based on the current set of labels: it runs when the PR is not a draft
+  # (which should also cover merge-group) or has the 'DraftRunCI' or
+  # 'Full CI build' label. Whether a build then happens, and whether it is the
+  # minimal or full matrix, is decided further below and in the strategy matrix.
   should-run:
-    if: ${{ !github.event.pull_request.draft || contains(github.event.pull_request.labels.*.name, 'DraftRunCI') }}
+    if: >-
+      ${{
+        !github.event.pull_request.draft
+        || contains(github.event.pull_request.labels.*.name, 'DraftRunCI')
+        || contains(github.event.pull_request.labels.*.name, 'Full CI build')
+      }}
     runs-on: ubuntu-latest
     steps:
       - name: Checkout repository
-        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
       - name: Determine changed files
         # This step checks whether any files have changed that should
         # cause the next jobs to run. We do it this way rather than
@@ -63,6 +82,7 @@ jobs:
             .github/scripts/strategy-matrix/**
             .github/workflows/reusable-build-test-config.yml
             .github/workflows/reusable-build-test.yml
+            .github/workflows/reusable-check-autogen.yml
             .github/workflows/reusable-clang-tidy.yml
             .github/workflows/reusable-package.yml
             .github/workflows/reusable-strategy-matrix.yml
@@ -70,6 +90,8 @@ jobs:
             .github/workflows/reusable-upload-recipe.yml
             .clang-tidy
             .codecov.yml
+            bin/check-tools.sh
+            bin/default-loader-path.sh
             cfg/**
             cmake/**
             conan/**
@@ -90,19 +112,26 @@ jobs:
         # least one of:
         # * Any of the files checked in the `changes` step were modified
         # * The PR is NOT a draft and is labeled "Ready to merge"
+        # * The PR is labeled "Full CI build" (draft or not)
         # * The workflow is running from the merge queue
         id: go
         env:
           FILES: ${{ steps.changes.outputs.any_changed }}
           DRAFT: ${{ github.event.pull_request.draft }}
           READY: ${{ contains(github.event.pull_request.labels.*.name, 'Ready to merge') }}
+          FULL: ${{ contains(github.event.pull_request.labels.*.name, 'Full CI build') }}
           MERGE: ${{ github.event_name == 'merge_group' }}
         run: |
-          echo "go=${{ (env.DRAFT != 'true' && env.READY == 'true') || env.FILES == 'true' || env.MERGE == 'true' }}" >>"${GITHUB_OUTPUT}"
+          echo "go=${{ (env.DRAFT != 'true' && env.READY == 'true') || env.FULL == 'true' || env.FILES == 'true' || env.MERGE == 'true' }}" >>"${GITHUB_OUTPUT}"
           cat "${GITHUB_OUTPUT}"
     outputs:
       go: ${{ steps.go.outputs.go == 'true' }}
 
+  check-autogen:
+    needs: should-run
+    if: ${{ needs.should-run.outputs.go == 'true' }}
+    uses: ./.github/workflows/reusable-check-autogen.yml
+
   check-levelization:
     needs: should-run
     if: ${{ needs.should-run.outputs.go == 'true' }}
@@ -121,7 +150,6 @@ jobs:
       issues: write
       contents: read
     with:
-      check_only_changed: true
       create_issue_on_failure: false
 
   build-test:
@@ -142,7 +170,10 @@ jobs:
 
   package:
     needs: [should-run, build-test]
-    if: ${{ needs.should-run.outputs.go == 'true' }}
+    # Packaging consumes the debian/rhel release binaries, which are only built
+    # by the full matrix. Skip it for pull requests that ran only the minimal
+    # matrix (i.e. not yet labeled "Ready to merge" or "Full CI build").
+    if: ${{ needs.should-run.outputs.go == 'true' && (github.event_name != 'pull_request' || contains(github.event.pull_request.labels.*.name, 'Ready to merge') || contains(github.event.pull_request.labels.*.name, 'Full CI build')) }}
     uses: ./.github/workflows/reusable-package.yml
 
   upload-recipe:
@@ -153,8 +184,8 @@ jobs:
     if: ${{ github.repository == 'XRPLF/rippled' && needs.should-run.outputs.go == 'true' && github.event_name == 'pull_request' && startsWith(github.event.pull_request.base.ref, 'release') }}
     uses: ./.github/workflows/reusable-upload-recipe.yml
     secrets:
-      remote_username: ${{ secrets.CONAN_REMOTE_USERNAME }}
-      remote_password: ${{ secrets.CONAN_REMOTE_PASSWORD }}
+      remote_username: ${{ secrets.NEXUS_REMOTE_USERNAME }}
+      remote_password: ${{ secrets.NEXUS_REMOTE_PASSWORD }}
 
   notify-clio:
     needs: upload-recipe
@@ -175,6 +206,7 @@ jobs:
   passed:
     if: failure() || cancelled()
     needs:
+      - check-autogen
       - check-levelization
       - check-rename
       - clang-tidy

.github/workflows/on-tag.yml

@@ -20,8 +20,8 @@ jobs:
     if: ${{ github.repository == 'XRPLF/rippled' }}
     uses: ./.github/workflows/reusable-upload-recipe.yml
     secrets:
-      remote_username: ${{ secrets.CONAN_REMOTE_USERNAME }}
-      remote_password: ${{ secrets.CONAN_REMOTE_PASSWORD }}
+      remote_username: ${{ secrets.NEXUS_REMOTE_USERNAME }}
+      remote_password: ${{ secrets.NEXUS_REMOTE_PASSWORD }}
 
   build-test:
     if: ${{ github.repository == 'XRPLF/rippled' }}
@@ -33,7 +33,6 @@ jobs:
     with:
       ccache_enabled: false
       os: ${{ matrix.os }}
-      strategy_matrix: minimal
     secrets:
       CODECOV_TOKEN: ${{ secrets.CODECOV_TOKEN }}
 

.github/workflows/on-trigger.yml

@@ -20,6 +20,7 @@ on:
       - ".github/scripts/strategy-matrix/**"
       - ".github/workflows/reusable-build-test-config.yml"
       - ".github/workflows/reusable-build-test.yml"
+      - ".github/workflows/reusable-check-autogen.yml"
       - ".github/workflows/reusable-clang-tidy.yml"
       - ".github/workflows/reusable-package.yml"
       - ".github/workflows/reusable-strategy-matrix.yml"
@@ -27,6 +28,8 @@ on:
       - ".github/workflows/reusable-upload-recipe.yml"
       - ".clang-tidy"
       - ".codecov.yml"
+      - "bin/check-tools.sh"
+      - "bin/default-loader-path.sh"
       - "cfg/**"
       - "cmake/**"
       - "conan/**"
@@ -65,13 +68,15 @@ defaults:
     shell: bash
 
 jobs:
+  check-autogen:
+    uses: ./.github/workflows/reusable-check-autogen.yml
+
   clang-tidy:
     uses: ./.github/workflows/reusable-clang-tidy.yml
     permissions:
       issues: write
       contents: read
     with:
-      check_only_changed: false
       create_issue_on_failure: ${{ github.event_name == 'schedule' }}
 
   build-test:
@@ -88,7 +93,6 @@ jobs:
       # not identical to a regular compilation.
       ccache_enabled: ${{ github.repository_owner == 'XRPLF' && !startsWith(github.ref, 'refs/heads/release') }}
       os: ${{ matrix.os }}
-      strategy_matrix: ${{ github.event_name == 'schedule' && 'all' || 'minimal' }}
     secrets:
       CODECOV_TOKEN: ${{ secrets.CODECOV_TOKEN }}
 
@@ -98,8 +102,8 @@ jobs:
     if: ${{ github.repository == 'XRPLF/rippled' && github.event_name == 'push' && github.ref == 'refs/heads/develop' }}
     uses: ./.github/workflows/reusable-upload-recipe.yml
     secrets:
-      remote_username: ${{ secrets.CONAN_REMOTE_USERNAME }}
-      remote_password: ${{ secrets.CONAN_REMOTE_PASSWORD }}
+      remote_username: ${{ secrets.NEXUS_REMOTE_USERNAME }}
+      remote_password: ${{ secrets.NEXUS_REMOTE_PASSWORD }}
 
   package:
     needs: build-test

.github/workflows/pre-commit.yml

@@ -14,7 +14,7 @@ on:
 jobs:
   # Call the workflow in the XRPLF/actions repo that runs the pre-commit hooks.
   run-hooks:
-    uses: XRPLF/actions/.github/workflows/pre-commit.yml@cba1f0891650baf1a9c88624dc2d72573be2eb81
+    uses: XRPLF/actions/.github/workflows/pre-commit.yml@3ba08d6ddf114092891d48491fc2e26c3ba15552
     with:
       runs_on: ubuntu-latest
-      container: '{ "image": "ghcr.io/xrplf/ci/tools-rippled-pre-commit:sha-41ec7c1" }'
+      container: '{ "image": "ghcr.io/xrplf/xrpld/pre-commit:sha-f56b79f" }'

.github/workflows/publish-docs.yml

@@ -41,13 +41,13 @@ env:
 jobs:
   build:
     runs-on: ubuntu-latest
-    container: ghcr.io/xrplf/ci/tools-rippled-documentation:sha-a8c7be1
+    container: ghcr.io/xrplf/xrpld/nix-ubuntu:sha-fecfc0c
     steps:
       - name: Checkout repository
-        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
       - name: Prepare runner
-        uses: XRPLF/actions/prepare-runner@90f11ee655d1687824fb8793db770477d52afbab
+        uses: XRPLF/actions/prepare-runner@c00c22ada3bd6bcda48fcb0d62fbbab49fec8a0f
         with:
           enable_ccache: false
 
@@ -57,19 +57,11 @@ jobs:
         with:
           subtract: ${{ env.NPROC_SUBTRACT }}
 
-      - name: Check configuration
-        run: |
-          echo 'Checking path.'
-          echo ${PATH} | tr ':' '\n'
+      - name: Print build environment
+        uses: XRPLF/actions/print-build-env@59dec886e4afb05a1724443af08baccbc045b574
 
-          echo 'Checking environment variables.'
-          env | sort
-
-          echo 'Checking CMake version.'
-          cmake --version
-
-          echo 'Checking Doxygen version.'
-          doxygen --version
+      - name: Check Doxygen version
+        run: doxygen --version
 
       - name: Build documentation
         env:

.github/workflows/reusable-build-docker-image.yml

@@ -1,89 +0,0 @@
-# Build a single-platform Docker image. On push, the image is pushed to
-# GHCR with arch-suffixed tags (e.g. `:latest-amd64`, `:sha-abc-amd64`)
-# so the calling workflow can stitch per-arch builds into a multi-arch
-# manifest without needing to pass digests around.
-name: Reusable build Docker image (single platform)
-
-on:
-  workflow_call:
-    inputs:
-      image_name:
-        description: "Full image name without tag (e.g. 'ghcr.io/xrplf/xrpld/nix-ubuntu')"
-        required: true
-        type: string
-      dockerfile:
-        description: "Path to the Dockerfile, relative to the repository root"
-        required: true
-        type: string
-      base_image:
-        description: "Value passed to the Dockerfile as the BASE_IMAGE build arg"
-        required: true
-        type: string
-      platform:
-        description: "Docker platform string, e.g. linux/amd64"
-        required: true
-        type: string
-      runner:
-        description: "GitHub Actions runner label to build on"
-        required: true
-        type: string
-      push:
-        description: "Whether to push the image to GHCR"
-        required: true
-        type: boolean
-
-defaults:
-  run:
-    shell: bash
-
-jobs:
-  build:
-    name: Build (${{ inputs.platform }})
-    runs-on: ${{ inputs.runner }}
-    permissions:
-      contents: read
-      packages: write
-
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
-
-      - name: Determine arch
-        id: vars
-        env:
-          PLATFORM: ${{ inputs.platform }}
-        run: |
-          echo "arch=${PLATFORM##*/}" >>$GITHUB_OUTPUT
-
-      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@d7f5e7f509e45cec5c76c4d5afdd7de93d0b3df5 # v4.1.0
-
-      - name: Login to GitHub Container Registry
-        if: inputs.push
-        uses: docker/login-action@650006c6eb7dba73a995cc03b0b2d7f5ca915bee # v4.2.0
-        with:
-          registry: ghcr.io
-          username: ${{ github.repository_owner }}
-          password: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Docker metadata
-        id: meta
-        uses: docker/metadata-action@80c7e94dd9b9319bd5eb7a0e0fe9291e23a2a2e9 # v6.1.0
-        with:
-          images: ${{ inputs.image_name }}
-          tags: |
-            type=sha,prefix=sha-,format=short
-            type=raw,value=latest
-          flavor: |
-            suffix=-${{ steps.vars.outputs.arch }},onlatest=true
-
-      - name: Build and push
-        uses: docker/build-push-action@f9f3042f7e2789586610d6e8b85c8f03e5195baf # v7.2.0
-        with:
-          context: .
-          file: ${{ inputs.dockerfile }}
-          platforms: ${{ inputs.platform }}
-          push: ${{ inputs.push }}
-          tags: ${{ steps.meta.outputs.tags }}
-          labels: ${{ steps.meta.outputs.labels }}
-          build-args: BASE_IMAGE=${{ inputs.base_image }}

.github/workflows/reusable-build-test-config.yml

@@ -3,6 +3,12 @@ name: Build and test configuration
 on:
   workflow_call:
     inputs:
+      benchmark:
+        description: "Whether to smoke-run the benchmarks after testing."
+        required: false
+        type: boolean
+        default: false
+
       build_only:
         description: 'Whether to only build or to build and test the code ("true", "false").'
         required: true
@@ -57,6 +63,12 @@ on:
         type: string
         default: ""
 
+      compiler:
+        description: 'The compiler to use ("gcc" or "clang"). Leave empty for macOS/Windows (uses system default).'
+        required: false
+        type: string
+        default: ""
+
     secrets:
       CODECOV_TOKEN:
         description: "The Codecov token to use for uploading coverage reports."
@@ -76,7 +88,7 @@ jobs:
     name: ${{ inputs.config_name }}
     runs-on: ${{ fromJSON(inputs.runs_on) }}
     container: ${{ inputs.image != '' && inputs.image || null }}
-    timeout-minutes: ${{ inputs.sanitizers != '' && 360 || 60 }}
+    timeout-minutes: ${{ inputs.sanitizers != '' && 360 || 180 }}
     env:
       # Use a namespace to keep the objects separate for each configuration.
       CCACHE_NAMESPACE: ${{ inputs.config_name }}
@@ -94,9 +106,10 @@ jobs:
       # header files are copied into separate directories by CMake, which will
       # otherwise result in cache misses.
       CCACHE_SLOPPINESS: include_file_ctime,include_file_mtime
-      # Determine if coverage and voidstar should be enabled.
+      # Determine if coverage, voidstar and validator-keys should be enabled.
       COVERAGE_ENABLED: ${{ contains(inputs.cmake_args, '-Dcoverage=ON') }}
       VOIDSTAR_ENABLED: ${{ contains(inputs.cmake_args, '-Dvoidstar=ON') }}
+      VALIDATOR_KEYS_ENABLED: ${{ contains(inputs.cmake_args, '-Dvalidator_keys=ON') }}
       SANITIZERS_ENABLED: ${{ inputs.sanitizers != '' }}
     steps:
       - name: Cleanup workspace (macOS and Windows)
@@ -104,10 +117,10 @@ jobs:
         uses: XRPLF/actions/cleanup-workspace@c7d9ce5ebb03c752a354889ecd870cadfc2b1cd4
 
       - name: Checkout repository
-        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
       - name: Prepare runner
-        uses: XRPLF/actions/prepare-runner@90f11ee655d1687824fb8793db770477d52afbab
+        uses: XRPLF/actions/prepare-runner@c00c22ada3bd6bcda48fcb0d62fbbab49fec8a0f
         with:
           enable_ccache: ${{ inputs.ccache_enabled }}
 
@@ -115,6 +128,11 @@ jobs:
         if: ${{ inputs.ccache_enabled && runner.debug == '1' }}
         run: echo "CCACHE_LOGFILE=${{ runner.temp }}/ccache.log" >>"${GITHUB_ENV}"
 
+      - name: Check tools
+        env:
+          CHECK_TOOLS_SKIP_CLONE: "1"
+        run: ./bin/check-tools.sh || true
+
       - name: Print build environment
         uses: XRPLF/actions/print-build-env@59dec886e4afb05a1724443af08baccbc045b574
 
@@ -124,6 +142,12 @@ jobs:
         with:
           subtract: ${{ inputs.nproc_subtract }}
 
+      - name: Set compiler environment (Linux)
+        if: ${{ runner.os == 'Linux' }}
+        uses: ./.github/actions/set-compiler-env
+        with:
+          compiler: ${{ inputs.compiler }}
+
       - name: Setup Conan
         env:
           SANITIZERS: ${{ inputs.sanitizers }}
@@ -146,37 +170,32 @@ jobs:
           CMAKE_ARGS: ${{ inputs.cmake_args }}
         run: |
           cmake \
-              -G '${{ runner.os == 'Windows' && 'Visual Studio 17 2022' || 'Ninja' }}' \
+              -G '${{ runner.os == 'Windows' && 'Visual Studio 18 2026' || 'Ninja' }}' \
               -DCMAKE_TOOLCHAIN_FILE:FILEPATH=build/generators/conan_toolchain.cmake \
               -DCMAKE_BUILD_TYPE="${BUILD_TYPE}" \
               ${CMAKE_ARGS} \
               ..
 
-      - name: Check protocol autogen files are up-to-date
-        working-directory: ${{ env.BUILD_DIR }}
+      # Export the sanitizer options before any instrumented binary runs. The
+      # build step below invokes instrumented dependency tools (protoc, grpc),
+      # so setting UBSAN_OPTIONS here lets the UBSan suppression list silence
+      # their diagnostics too, not just at test time.
+      # GITHUB_WORKSPACE (not the github.workspace context) is used so the path
+      # resolves correctly inside the container job.
+      - name: Set sanitizer options
+        if: ${{ !inputs.build_only && env.SANITIZERS_ENABLED == 'true' }}
         env:
-          MESSAGE: |
-
-            The generated protocol wrapper classes are out of date.
-
-            This typically happens when the macro files or generator scripts
-            have changed but the generated files were not regenerated.
-
-            To fix this:
-              1. Run: cmake --build . --target setup_code_gen
-              2. Run: cmake --build . --target code_gen
-              3. Commit and push the regenerated files
+          CONFIG_NAME: ${{ inputs.config_name }}
         run: |
-          set -e
-          cmake --build . --target setup_code_gen
-          cmake --build . --target code_gen
-          DIFF=$(git -C .. status --porcelain -- include/xrpl/protocol_autogen src/tests/libxrpl/protocol_autogen)
-          if [ -n "${DIFF}" ]; then
-              echo "::error::Generated protocol files are out of date"
-              git -C .. diff -- include/xrpl/protocol_autogen src/tests/libxrpl/protocol_autogen
-              echo "${MESSAGE}"
-              exit 1
+          SUPP="${GITHUB_WORKSPACE}/sanitizers/suppressions"
+          ASAN_OPTS="include=${SUPP}/runtime-asan-options.txt:suppressions=${SUPP}/asan.supp"
+          if [[ "${CONFIG_NAME}" == *gcc* ]]; then
+              ASAN_OPTS="${ASAN_OPTS}:alloc_dealloc_mismatch=0"
           fi
+          echo "ASAN_OPTIONS=${ASAN_OPTS}" >>${GITHUB_ENV}
+          echo "TSAN_OPTIONS=include=${SUPP}/runtime-tsan-options.txt:suppressions=${SUPP}/tsan.supp" >>${GITHUB_ENV}
+          echo "UBSAN_OPTIONS=include=${SUPP}/runtime-ubsan-options.txt:suppressions=${SUPP}/ubsan.supp" >>${GITHUB_ENV}
+          echo "LSAN_OPTIONS=include=${SUPP}/runtime-lsan-options.txt:suppressions=${SUPP}/lsan.supp" >>${GITHUB_ENV}
 
       - name: Build the binary
         working-directory: ${{ env.BUILD_DIR }}
@@ -185,11 +204,13 @@ jobs:
           BUILD_TYPE: ${{ inputs.build_type }}
           CMAKE_TARGET: ${{ inputs.cmake_target }}
         run: |
+          set -o pipefail
           cmake \
               --build . \
               --config "${BUILD_TYPE}" \
               --parallel "${BUILD_NPROC}" \
-              --target "${CMAKE_TARGET}"
+              --target "${CMAKE_TARGET}" \
+              2>&1 | tee "${GITHUB_WORKSPACE}/build.log"
 
       - name: Show ccache statistics
         if: ${{ inputs.ccache_enabled }}
@@ -209,6 +230,31 @@ jobs:
           retention-days: 3
           if-no-files-found: error
 
+      - name: Run the validator-keys tests
+        if: ${{ env.VALIDATOR_KEYS_ENABLED == 'true' }}
+        working-directory: ${{ env.BUILD_DIR }}
+        run: ./validator-keys --unittest
+
+      - name: Upload the validator-keys binary
+        if: ${{ github.event.repository.visibility == 'public' && env.VALIDATOR_KEYS_ENABLED == 'true' }}
+        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+        with:
+          name: validator-keys-${{ inputs.config_name }}
+          path: |
+            ${{ env.BUILD_DIR }}/validator-keys
+            ${{ env.BUILD_DIR }}/validator-keys-LICENSE
+          retention-days: 3
+          if-no-files-found: error
+
+      - name: Upload the test binary (Linux)
+        if: ${{ github.event.repository.visibility == 'public' && runner.os == 'Linux' }}
+        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+        with:
+          name: xrpl_tests-${{ inputs.config_name }}
+          path: ${{ env.BUILD_DIR }}/xrpl_tests
+          retention-days: 3
+          if-no-files-found: error
+
       - name: Export server definitions
         if: ${{ runner.os != 'Windows' && !inputs.build_only && env.VOIDSTAR_ENABLED != 'true' }}
         working-directory: ${{ env.BUILD_DIR }}
@@ -217,7 +263,7 @@ jobs:
           ./xrpld --definitions | python3 -m json.tool >server_definitions.json
 
       - name: Upload server definitions
-        if: ${{ github.event.repository.visibility == 'public' && inputs.config_name == 'debian-bookworm-gcc-13-amd64-release' }}
+        if: ${{ github.event.repository.visibility == 'public' && inputs.config_name == 'ubuntu-gcc-debug-amd64-coverage' }}
         uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
         with:
           name: server-definitions
@@ -243,32 +289,10 @@ jobs:
         run: |
           ./xrpld --version | grep libvoidstar
 
-      - name: Set sanitizer options
-        if: ${{ !inputs.build_only && env.SANITIZERS_ENABLED == 'true' }}
-        env:
-          CONFIG_NAME: ${{ inputs.config_name }}
-        run: |
-          ASAN_OPTS="include=${GITHUB_WORKSPACE}/sanitizers/suppressions/runtime-asan-options.txt:suppressions=${GITHUB_WORKSPACE}/sanitizers/suppressions/asan.supp"
-          if [[ "${CONFIG_NAME}" == *gcc* ]]; then
-              ASAN_OPTS="${ASAN_OPTS}:alloc_dealloc_mismatch=0"
-          fi
-          echo "ASAN_OPTIONS=${ASAN_OPTS}" >>${GITHUB_ENV}
-          echo "TSAN_OPTIONS=include=${GITHUB_WORKSPACE}/sanitizers/suppressions/runtime-tsan-options.txt:suppressions=${GITHUB_WORKSPACE}/sanitizers/suppressions/tsan.supp" >>${GITHUB_ENV}
-          echo "UBSAN_OPTIONS=include=${GITHUB_WORKSPACE}/sanitizers/suppressions/runtime-ubsan-options.txt:suppressions=${GITHUB_WORKSPACE}/sanitizers/suppressions/ubsan.supp" >>${GITHUB_ENV}
-          echo "LSAN_OPTIONS=include=${GITHUB_WORKSPACE}/sanitizers/suppressions/runtime-lsan-options.txt:suppressions=${GITHUB_WORKSPACE}/sanitizers/suppressions/lsan.supp" >>${GITHUB_ENV}
-
       - name: Run the separate tests
         if: ${{ !inputs.build_only }}
-        working-directory: ${{ env.BUILD_DIR }}
-        # Windows locks some of the build files while running tests, and parallel jobs can collide
-        env:
-          BUILD_TYPE: ${{ inputs.build_type }}
-          PARALLELISM: ${{ runner.os == 'Windows' && '1' || steps.nproc.outputs.nproc }}
-        run: |
-          ctest \
-              --output-on-failure \
-              -C "${BUILD_TYPE}" \
-              -j "${PARALLELISM}"
+        working-directory: ${{ runner.os == 'Windows' && format('{0}/{1}', env.BUILD_DIR, inputs.build_type) || env.BUILD_DIR }}
+        run: ./xrpl_tests
 
       - name: Run the embedded tests
         if: ${{ !inputs.build_only }}
@@ -279,27 +303,67 @@ jobs:
           set -o pipefail
           # Coverage builds are slower due to instrumentation; use fewer parallel jobs to avoid flakiness
           [ "$COVERAGE_ENABLED" = "true" ] && BUILD_NPROC=$((BUILD_NPROC - 2))
-          ./xrpld --unittest --unittest-jobs "${BUILD_NPROC}" 2>&1 | tee unittest.log
 
-      - name: Show test failure summary
-        if: ${{ failure() && !inputs.build_only }}
-        env:
-          WORKING_DIR: ${{ runner.os == 'Windows' && format('{0}\{1}', env.BUILD_DIR, inputs.build_type) || env.BUILD_DIR }}
+          # The resolver/preload workaround is only correct for the ASan build:
+          # a regular build doesn't hit the __dn_expand interceptor bug, and must
+          # NOT have libasan injected. So only preload when xrpld is ASan-built.
+          #
+          # libresolv hosts getaddrinfo's resolver helpers (dn_expand, res_*). Under ASan
+          # these are intercepted via dlsym(RTLD_NEXT, ...), which yields a NULL pointer
+          # and crashes DNS resolution if libresolv isn't loaded. Linking it guarantees
+          # the symbols are present; it's a harmless no-op on glibc >= 2.34 (merged into
+          # libc) and is what the compiler driver already does for sanitizer builds.
+          #   https://github.com/llvm/llvm-project/issues/59007
+          #   https://github.com/google/sanitizers/issues/1592
+          if ldd ./xrpld | grep -q libasan; then
+              PRELOAD="$(gcc -print-file-name=libasan.so):/usr/lib/x86_64-linux-gnu/libresolv.so.2"
+          else
+              PRELOAD=""
+          fi
+
+          LD_PRELOAD="$PRELOAD" ./xrpld --unittest --unittest-jobs "${BUILD_NPROC}" 2>&1 | tee "${GITHUB_WORKSPACE}/unittest.log"
+
+      # Smoke-run every benchmark module with a single repetition to confirm the
+      # benchmarks still build and execute. This is a correctness check, not a
+      # performance measurement, so there is nothing to gain from repeating it
+      # across configurations: it is opted into by a single config in the
+      # strategy matrix (see the 'benchmark' flag in the JSON files), which
+      # keeps it off instrumented builds (sanitizers/coverage/voidstar), where
+      # it would be slow and meaningless, off Debug builds, where it is much
+      # slower, and off Windows, where the `install` target does not build them.
+      - name: Run the benchmarks
+        if: ${{ inputs.benchmark }}
+        working-directory: ${{ env.BUILD_DIR }}
         run: |
-          if [ ! -d "${WORKING_DIR}" ]; then
-              echo "Working directory '${WORKING_DIR}' does not exist."
-              exit 0
-          fi
+          rc=0
+          while IFS= read -r bench; do
+              echo "::group::${bench}"
+              "./${bench}" --benchmark_repetitions=1 || rc=1
+              echo "::endgroup::"
+          done < <(find src/benchmarks -type f -perm -u+x -name 'xrpl.bench.*')
+          exit "${rc}"
 
-          cd "${WORKING_DIR}"
+      - name: Show build/test failure summary
+        if: ${{ failure() }}
+        run: |
+          cd "${GITHUB_WORKSPACE}"
 
-          if [ ! -f unittest.log ]; then
-              echo "unittest.log not found; embedded tests may not have run."
-              exit 0
-          fi
-
-          if ! grep -E "failed" unittest.log; then
-              echo "Log present but no failure lines found in unittest.log."
+          if [ -f unittest.log ]; then
+              if ! grep -E "failed" unittest.log | grep -vE "^I[0-9]|^[0-9]+> (ERR:|FTL:)"; then
+                  echo "unittest.log present but no failure lines found."
+              fi
+          elif [ -f build.log ]; then
+              # GCC/Clang emit "error:" (covers "fatal error:"); MSVC emits
+              # "error C####:", "error LNK####:", and "fatal error LNK####:".
+              # -A6 prints the lines that follow each match (source line, caret,
+              # notes, and the "N errors generated" tally) to capture the whole
+              # diagnostic block.
+              if ! grep -E -A6 "error:|error C[0-9]{4}|error LNK[0-9]{4}|fatal error" build.log; then
+                  echo "build.log present but no compile errors found."
+              fi
+          else
+              echo "unittest.log/build.log not found; something went wrong."
+              exit 1
           fi
       - name: Debug failure (Linux)
         if: ${{ failure() && runner.os == 'Linux' && !inputs.build_only }}
@@ -323,7 +387,7 @@ jobs:
               --target coverage
 
       - name: Upload coverage report
-        if: ${{ github.repository == 'XRPLF/rippled' && !inputs.build_only && env.COVERAGE_ENABLED == 'true' }}
+        if: ${{ github.repository_owner == 'XRPLF' && !inputs.build_only && env.COVERAGE_ENABLED == 'true' }}
         uses: codecov/codecov-action@fb8b3582c8e4def4969c97caa2f19720cb33a72f # v7.0.0
         with:
           disable_search: true

.github/workflows/reusable-build-test.yml

@@ -19,13 +19,6 @@ on:
         required: true
         type: string
 
-      strategy_matrix:
-        # TODO: Support additional strategies, e.g. "ubuntu" for generating all Ubuntu configurations.
-        description: 'The strategy matrix to use for generating the configurations ("minimal", "all").'
-        required: false
-        type: string
-        default: "minimal"
-
     secrets:
       CODECOV_TOKEN:
         description: "The Codecov token to use for uploading coverage reports."
@@ -37,7 +30,6 @@ jobs:
     uses: ./.github/workflows/reusable-strategy-matrix.yml
     with:
       os: ${{ inputs.os }}
-      strategy_matrix: ${{ inputs.strategy_matrix }}
 
   # Build and test the binary for each configuration.
   build-test-config:
@@ -47,16 +39,17 @@ jobs:
     strategy:
       fail-fast: ${{ github.event_name == 'merge_group' }}
       matrix: ${{ fromJson(needs.generate-matrix.outputs.matrix) }}
-      max-parallel: 10
     with:
+      benchmark: ${{ matrix.benchmark }}
       build_only: ${{ matrix.build_only }}
       build_type: ${{ matrix.build_type }}
       ccache_enabled: ${{ inputs.ccache_enabled }}
       cmake_args: ${{ matrix.cmake_args }}
       cmake_target: ${{ matrix.cmake_target }}
       runs_on: ${{ toJSON(matrix.architecture.runner) }}
-      image: ${{ contains(matrix.architecture.platform, 'linux') && format('ghcr.io/xrplf/ci/{0}-{1}:{2}-{3}-sha-{4}', matrix.os.distro_name, matrix.os.distro_version, matrix.os.compiler_name, matrix.os.compiler_version, matrix.os.image_sha) || '' }}
+      image: ${{ matrix.image || '' }}
       config_name: ${{ matrix.config_name }}
       sanitizers: ${{ matrix.sanitizers }}
+      compiler: ${{ matrix.compiler || '' }}
     secrets:
       CODECOV_TOKEN: ${{ secrets.CODECOV_TOKEN }}

.github/workflows/reusable-check-autogen.yml

@@ -0,0 +1,76 @@
+# This workflow checks that the generated protocol wrapper classes are
+# up-to-date with the macro files and generator scripts they are produced from,
+# see more info in include/xrpl/protocol_autogen/README.md.
+name: Check autogen
+
+# This workflow can only be triggered by other workflows.
+on: workflow_call
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}-autogen
+  cancel-in-progress: true
+
+defaults:
+  run:
+    shell: bash
+
+env:
+  BUILD_DIR: build/codegen
+
+jobs:
+  autogen:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+
+      - name: Set up Python
+        uses: actions/setup-python@5fda3b95a4ea91299a34e894583c3862153e4b97 # v7.0.0
+        with:
+          python-version: "3.13"
+
+      # Code generation is pure Python, so the standalone project below offers
+      # the same targets as the main build without needing its dependencies or
+      # a compiler, which keeps this job down to a few seconds.
+      - name: Configure CMake
+        run: cmake -S cmake/codegen -B "${BUILD_DIR}"
+
+      - name: Install code generation dependencies
+        run: cmake --build "${BUILD_DIR}" --target setup_code_gen
+
+      - name: Generate code
+        run: cmake --build "${BUILD_DIR}" --target code_gen
+
+      - name: Check for differences
+        env:
+          MESSAGE: |
+
+            The generated protocol wrapper classes are out of date.
+
+            This typically happens when the macro files or generator scripts
+            have changed but the generated files were not regenerated.
+
+            Run the following from the repository root, then commit and push
+            the regenerated files. This needs neither the dependencies nor a
+            compiler. See include/xrpl/protocol_autogen/README.md for more info.
+
+              cmake -S cmake/codegen -B build/codegen
+              cmake --build build/codegen --target setup_code_gen
+              cmake --build build/codegen --target code_gen
+
+            In an already configured build directory, the 'setup_code_gen' and
+            'code_gen' targets do the same thing.
+        run: |
+          # Record untracked files in the index without staging their contents,
+          # so that classes generated for a newly added transaction or ledger
+          # entry type show up in the diff below rather than silently as an
+          # empty one.
+          git add --intent-to-add .
+          DIFF=$(git status --porcelain)
+          if [ -n "${DIFF}" ]; then
+              # Print the differences to give the contributor a hint about what to
+              # expect when running code generation on their own machine.
+              git diff
+              echo "${MESSAGE}"
+              exit 1
+          fi

.github/workflows/reusable-check-levelization.yml

@@ -18,7 +18,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout repository
-        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
       - name: Check levelization
         run: python .github/scripts/levelization/generate.py
       - name: Check for differences

.github/workflows/reusable-check-rename.yml

@@ -18,7 +18,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout repository
-        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
       - name: Check definitions
         run: .github/scripts/rename/definitions.sh .
       - name: Check copyright notices

.github/workflows/reusable-clang-tidy.yml

@@ -3,10 +3,6 @@ name: Run clang-tidy on files
 on:
   workflow_call:
     inputs:
-      check_only_changed:
-        description: "Check only changed files in PR. If false, checks all files in the repository."
-        type: boolean
-        default: false
       create_issue_on_failure:
         description: "Whether to create an issue if the check failed"
         type: boolean
@@ -20,32 +16,34 @@ env:
   BUILD_DIR: build
   BUILD_TYPE: Debug # Debug so that ASSERTS and such participate in clang-tidy check
 
-  OUTPUT_FILE: clang-tidy-output.txt
-  DIFF_FILE: clang-tidy-git-diff.txt
-  ISSUE_FILE: clang-tidy-issue.md
+  OUTPUT_FILE: /tmp/clang-tidy-output.txt
+  FILTERED_OUTPUT_FILE: /tmp/clang-tidy-filtered-output.txt
+  DIFF_FILE: /tmp/clang-tidy-git-diff.txt
+  ISSUE_FILE: /tmp/clang-tidy-issue.md
+
+  COMPILER: clang
 
 jobs:
   determine-files:
-    if: ${{ inputs.check_only_changed }}
     permissions:
       contents: read
-    uses: XRPLF/actions/.github/workflows/determine-tidy-files.yml@224f3c48d3014d082a1129237b8291ff0b0a331f
+    uses: XRPLF/actions/.github/workflows/determine-tidy-files.yml@d041ac9f1fa9f07a4ba335eb4c1c82233fb3fef6
 
   run-clang-tidy:
     name: Run clang tidy
     needs: [determine-files]
-    if: ${{ always() && !cancelled() && (!inputs.check_only_changed || needs.determine-files.outputs.cpp_changed_files != '' || needs.determine-files.outputs.clang_tidy_config_changed == 'true') }}
+    if: ${{ needs.determine-files.outputs.cpp_changed_files != '' || needs.determine-files.outputs.need_full_run == 'true' }}
     runs-on: ["self-hosted", "Linux", "X64", "heavy"]
-    container: "ghcr.io/xrplf/ci/debian-trixie:clang-21-sha-53033a2"
+    container: "ghcr.io/xrplf/xrpld/nix-debian:sha-fecfc0c"
     permissions:
       contents: read
       issues: write
     steps:
       - name: Checkout repository
-        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
       - name: Prepare runner
-        uses: XRPLF/actions/prepare-runner@90f11ee655d1687824fb8793db770477d52afbab
+        uses: XRPLF/actions/prepare-runner@c00c22ada3bd6bcda48fcb0d62fbbab49fec8a0f
         with:
           enable_ccache: false
 
@@ -56,6 +54,11 @@ jobs:
         uses: XRPLF/actions/get-nproc@cf0433aa74563aead044a1e395610c96d65a37cf
         id: nproc
 
+      - name: Set compiler environment
+        uses: ./.github/actions/set-compiler-env
+        with:
+          compiler: ${{ env.COMPILER }}
+
       - name: Setup Conan
         uses: ./.github/actions/setup-conan
 
@@ -76,6 +79,7 @@ jobs:
               -Dtests=ON \
               -Dwerr=ON \
               -Dxrpld=ON \
+              -Dverify_headers=ON \
               ..
 
       # clang-tidy needs headers generated from proto files
@@ -88,15 +92,15 @@ jobs:
         id: run_clang_tidy
         continue-on-error: true
         env:
-          TARGETS: ${{ (needs.determine-files.outputs.clang_tidy_config_changed != 'true' && inputs.check_only_changed) && needs.determine-files.outputs.cpp_changed_files || 'src tests' }}
+          TARGETS: ${{ needs.determine-files.outputs.need_full_run != 'true' && needs.determine-files.outputs.cpp_changed_files || 'include src tests' }}
         run: |
           set -o pipefail
-          run-clang-tidy -j ${{ steps.nproc.outputs.nproc }} -p "${BUILD_DIR}" -quiet -fix -allow-no-checks ${TARGETS} 2>&1 | tee "${OUTPUT_FILE}"
+          run-clang-tidy -j ${{ steps.nproc.outputs.nproc }} -p "${BUILD_DIR}" -quiet -fix -format -allow-no-checks ${TARGETS} 2>&1 | tee "${OUTPUT_FILE}"
 
-      - name: Print errors
+      - name: Print filtered clang-tidy errors
         if: ${{ steps.run_clang_tidy.outcome != 'success' }}
         run: |
-          sed '/error\||/!d' "${OUTPUT_FILE}"
+          bin/filter-clang-tidy.py "${OUTPUT_FILE}"
 
       - name: Upload clang-tidy output
         if: ${{ github.event.repository.visibility == 'public' && steps.run_clang_tidy.outcome != 'success' }}
@@ -140,26 +144,26 @@ jobs:
           \`\`\`
           EOF
 
-      - name: Append clang-tidy output to issue body (filter for errors and warnings)
+      - name: Append filtered clang-tidy output to issue body
         if: ${{ steps.run_clang_tidy.outcome != 'success' }}
         run: |
           if [ -f "${OUTPUT_FILE}" ]; then
-              # Extract lines containing 'error:', 'warning:', or 'note:'
-              grep -E '(error:|warning:|note:)' "${OUTPUT_FILE}" >filtered-output.txt || true
+              # Filter to the unique errors with their source context.
+              bin/filter-clang-tidy.py "${OUTPUT_FILE}" >"${FILTERED_OUTPUT_FILE}" || true
 
               # If filtered output is empty, use original (might be a different error format)
-              if [ ! -s filtered-output.txt ]; then
-                  cp "${OUTPUT_FILE}" filtered-output.txt
+              if [ ! -s "${FILTERED_OUTPUT_FILE}" ]; then
+                  cp "${OUTPUT_FILE}" "${FILTERED_OUTPUT_FILE}"
               fi
 
               # Truncate if too large
-              head -c 60000 filtered-output.txt >>"${ISSUE_FILE}"
-              if [ "$(wc -c <filtered-output.txt)" -gt 60000 ]; then
+              head -c 60000 "${FILTERED_OUTPUT_FILE}" >>"${ISSUE_FILE}"
+              if [ "$(wc -c <"${FILTERED_OUTPUT_FILE}")" -gt 60000 ]; then
                   echo "" >>"${ISSUE_FILE}"
                   echo "... (output truncated, see artifacts for full output)" >>"${ISSUE_FILE}"
               fi
 
-              rm filtered-output.txt
+              rm "${FILTERED_OUTPUT_FILE}"
           else
               echo "No output file found" >>"${ISSUE_FILE}"
           fi

.github/workflows/reusable-package.yml

@@ -1,8 +1,7 @@
-# Build Linux packages (DEB and RPM) from pre-built binary artifacts.
-# Discovers which configurations to package from linux.json (os entries
-# with "package": true) and fans out one job per entry. Today only
-# linux/amd64 is emitted; the architecture is hardcoded both here
-# (runner) and in generate.py.
+# Build Linux packages (DEB and RPM) from pre-built binary artifacts (xrpld and
+# validator-keys). Discovers which configurations to package from linux.json
+# (configs in "package_configs") and fans out one job per distro. Only
+# linux/amd64 is supported; the runner is hardcoded in the job below.
 name: Package
 
 on:
@@ -28,70 +27,59 @@ jobs:
       matrix: ${{ steps.generate.outputs.matrix }}
     steps:
       - name: Checkout repository
-        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
       - name: Set up Python
-        uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405 # v6.2.0
+        uses: actions/setup-python@5fda3b95a4ea91299a34e894583c3862153e4b97 # v7.0.0
         with:
-          python-version: 3.13
+          python-version: "3.13"
 
       - name: Generate packaging matrix
         id: generate
         working-directory: .github/scripts/strategy-matrix
-        run: |
-          ./generate.py --packaging --config=linux.json >>"${GITHUB_OUTPUT}"
-
-  generate-version:
-    runs-on: ubuntu-latest
-    outputs:
-      version: ${{ steps.version.outputs.version }}
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
-        with:
-          sparse-checkout: |
-            .github/actions/generate-version
-            src/libxrpl/protocol/BuildInfo.cpp
-      - name: Generate version
-        id: version
-        uses: ./.github/actions/generate-version
+        run: ./generate.py --packaging >>"${GITHUB_OUTPUT}"
 
   package:
-    needs: [generate-matrix, generate-version]
+    needs: [generate-matrix]
     if: ${{ github.event.repository.visibility == 'public' }}
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.generate-matrix.outputs.matrix) }}
-    name: "${{ matrix.artifact_name }}"
+    name: "${{ matrix.xrpld_artifact_name }}"
     permissions:
       contents: read
     runs-on: ["self-hosted", "Linux", "X64", "heavy"]
-    container: ${{ format('ghcr.io/xrplf/ci/{0}-{1}:{2}-{3}-sha-{4}', matrix.os.distro_name, matrix.os.distro_version, matrix.os.compiler_name, matrix.os.compiler_version, matrix.os.image_sha) }}
+    container: ${{ matrix.image }}
     timeout-minutes: 30
 
     steps:
       - name: Checkout repository
-        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
-      - name: Download pre-built binary
+      - name: Download pre-built xrpld binary
         uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
         with:
-          name: ${{ matrix.artifact_name }}
+          name: ${{ matrix.xrpld_artifact_name }}
           path: ${{ env.BUILD_DIR }}
 
-      - name: Make binary executable
-        run: chmod +x "${BUILD_DIR}/xrpld"
+      - name: Download pre-built validator-keys binary
+        uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
+        with:
+          name: ${{ matrix.validator_keys_artifact_name }}
+          path: ${{ env.BUILD_DIR }}
+
+      - name: Make binaries executable
+        run: chmod +x "${BUILD_DIR}/xrpld" "${BUILD_DIR}/validator-keys"
 
       - name: Build package
         env:
-          PKG_VERSION: ${{ needs.generate-version.outputs.version }}
           PKG_RELEASE: ${{ inputs.pkg_release }}
         run: ./package/build_pkg.sh
 
       - name: Upload package artifact
         uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
         with:
-          name: ${{ matrix.artifact_name }}-pkg-${{ needs.generate-version.outputs.version }}
+          name: ${{ matrix.xrpld_artifact_name }}-pkg
           path: |
             ${{ env.BUILD_DIR }}/debbuild/*.deb
             ${{ env.BUILD_DIR }}/debbuild/*.ddeb

.github/workflows/reusable-strategy-matrix.yml

@@ -4,15 +4,9 @@ on:
   workflow_call:
     inputs:
       os:
-        description: 'The operating system to use for the build ("linux", "macos", "windows").'
+        description: 'The operating system to use for the build ("linux", "macos", "windows", or empty for all).'
         required: false
         type: string
-      strategy_matrix:
-        # TODO: Support additional strategies, e.g. "ubuntu" for generating all Ubuntu configurations.
-        description: 'The strategy matrix to use for generating the configurations ("minimal", "all").'
-        required: false
-        type: string
-        default: "minimal"
     outputs:
       matrix:
         description: "The generated strategy matrix."
@@ -29,17 +23,20 @@ jobs:
       matrix: ${{ steps.generate.outputs.matrix }}
     steps:
       - name: Checkout repository
-        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
       - name: Set up Python
-        uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405 # v6.2.0
+        uses: actions/setup-python@5fda3b95a4ea91299a34e894583c3862153e4b97 # v7.0.0
         with:
-          python-version: 3.13
+          python-version: "3.13"
 
       - name: Generate strategy matrix
         working-directory: .github/scripts/strategy-matrix
         id: generate
         env:
-          GENERATE_CONFIG: ${{ inputs.os != '' && format('--config={0}.json', inputs.os) || '' }}
-          GENERATE_OPTION: ${{ inputs.strategy_matrix == 'all' && '--all' || '' }}
-        run: ./generate.py ${GENERATE_OPTION} ${GENERATE_CONFIG} >>"${GITHUB_OUTPUT}"
+          GENERATE_CONFIG: ${{ inputs.os != '' && format('--config={0}', inputs.os) || '' }}
+          # Run only the minimal matrix for pull requests that are not yet
+          # labeled "Ready to merge" or "Full CI build". Any other event (merge
+          # queue, push, schedule, manual dispatch) runs the full matrix.
+          GENERATE_MINIMAL: ${{ (github.event_name == 'pull_request' && !contains(github.event.pull_request.labels.*.name, 'Ready to merge') && !contains(github.event.pull_request.labels.*.name, 'Full CI build')) && '--minimal' || '' }}
+        run: ./generate.py ${GENERATE_CONFIG} ${GENERATE_MINIMAL} >>"${GITHUB_OUTPUT}"

.github/workflows/reusable-upload-recipe.yml

@@ -14,7 +14,7 @@ on:
         description: "The URL of the Conan endpoint to use."
         required: false
         type: string
-        default: https://conan.ripplex.io
+        default: https://conan.xrplf.org/repository/conan/
 
     secrets:
       remote_username:
@@ -40,10 +40,14 @@ defaults:
 jobs:
   upload:
     runs-on: ubuntu-latest
-    container: ghcr.io/xrplf/ci/ubuntu-noble:gcc-13-sha-5dd7158
+    container: ghcr.io/xrplf/xrpld/nix-ubuntu:sha-fecfc0c
+    env:
+      REMOTE_NAME: ${{ inputs.remote_name }}
+      CONAN_LOGIN_USERNAME_XRPLF: ${{ secrets.remote_username }}
+      CONAN_PASSWORD_XRPLF: ${{ secrets.remote_password }}
     steps:
       - name: Checkout repository
-        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
       - name: Generate build version number
         id: version
@@ -56,15 +60,9 @@ jobs:
           remote_url: ${{ inputs.remote_url }}
 
       - name: Log into Conan remote
-        env:
-          REMOTE_NAME: ${{ inputs.remote_name }}
-          REMOTE_USERNAME: ${{ secrets.remote_username }}
-          REMOTE_PASSWORD: ${{ secrets.remote_password }}
-        run: conan remote login "${REMOTE_NAME}" "${REMOTE_USERNAME}" --password "${REMOTE_PASSWORD}"
+        run: conan remote login "${REMOTE_NAME}" "${CONAN_LOGIN_USERNAME_XRPLF}" --password "${CONAN_PASSWORD_XRPLF}"
 
       - name: Upload Conan recipe (version)
-        env:
-          REMOTE_NAME: ${{ inputs.remote_name }}
         run: |
           conan export . --version=${{ steps.version.outputs.version }}
           conan upload --confirm --check --remote="${REMOTE_NAME}" xrpl/${{ steps.version.outputs.version }}
@@ -73,8 +71,6 @@ jobs:
       # 'develop' branch, see on-trigger.yml.
       - name: Upload Conan recipe (develop)
         if: ${{ github.event_name == 'push' }}
-        env:
-          REMOTE_NAME: ${{ inputs.remote_name }}
         run: |
           conan export . --version=develop
           conan upload --confirm --check --remote="${REMOTE_NAME}" xrpl/develop
@@ -83,8 +79,6 @@ jobs:
       # one of the 'release' branches, see on-pr.yml.
       - name: Upload Conan recipe (rc)
         if: ${{ github.event_name == 'pull_request' }}
-        env:
-          REMOTE_NAME: ${{ inputs.remote_name }}
         run: |
           conan export . --version=rc
           conan upload --confirm --check --remote="${REMOTE_NAME}" xrpl/rc
@@ -93,8 +87,6 @@ jobs:
       # release, see on-tag.yml.
       - name: Upload Conan recipe (release)
         if: ${{ startsWith(github.ref, 'refs/tags/') }}
-        env:
-          REMOTE_NAME: ${{ inputs.remote_name }}
         run: |
           conan export . --version=release
           conan upload --confirm --check --remote="${REMOTE_NAME}" xrpl/release

.github/workflows/upload-conan-deps.yml

@@ -30,10 +30,11 @@ on:
       - ".github/scripts/strategy-matrix/**"
       - conanfile.py
       - conan.lock
+      - conan/profiles/**
 
 env:
   CONAN_REMOTE_NAME: xrplf
-  CONAN_REMOTE_URL: https://conan.ripplex.io
+  CONAN_REMOTE_URL: https://conan.xrplf.org/repository/conan/
   NPROC_SUBTRACT: 2
 
 concurrency:
@@ -48,8 +49,6 @@ jobs:
   # Generate the strategy matrix to be used by the following job.
   generate-matrix:
     uses: ./.github/workflows/reusable-strategy-matrix.yml
-    with:
-      strategy_matrix: ${{ github.event_name == 'pull_request' && 'minimal' || 'all' }}
 
   # Build and upload the dependencies for each configuration.
   run-upload-conan-deps:
@@ -58,19 +57,18 @@ jobs:
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.generate-matrix.outputs.matrix) }}
-      max-parallel: 10
     runs-on: ${{ matrix.architecture.runner }}
-    container: ${{ contains(matrix.architecture.platform, 'linux') && format('ghcr.io/xrplf/ci/{0}-{1}:{2}-{3}-sha-{4}', matrix.os.distro_name, matrix.os.distro_version, matrix.os.compiler_name, matrix.os.compiler_version, matrix.os.image_sha) || null }}
+    container: ${{ matrix.image || null }}
     steps:
       - name: Cleanup workspace (macOS and Windows)
         if: ${{ runner.os == 'macOS' || runner.os == 'Windows' }}
         uses: XRPLF/actions/cleanup-workspace@c7d9ce5ebb03c752a354889ecd870cadfc2b1cd4
 
       - name: Checkout repository
-        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
       - name: Prepare runner
-        uses: XRPLF/actions/prepare-runner@90f11ee655d1687824fb8793db770477d52afbab
+        uses: XRPLF/actions/prepare-runner@c00c22ada3bd6bcda48fcb0d62fbbab49fec8a0f
         with:
           enable_ccache: false
 
@@ -83,6 +81,12 @@ jobs:
         with:
           subtract: ${{ env.NPROC_SUBTRACT }}
 
+      - name: Set compiler environment (Linux)
+        if: ${{ runner.os == 'Linux' }}
+        uses: ./.github/actions/set-compiler-env
+        with:
+          compiler: ${{ matrix.compiler }}
+
       - name: Setup Conan
         env:
           SANITIZERS: ${{ matrix.sanitizers }}
@@ -104,10 +108,12 @@ jobs:
 
       - name: Log into Conan remote
         if: ${{ github.repository == 'XRPLF/rippled' && (github.event_name == 'push' || github.event_name == 'workflow_dispatch') }}
-        run: conan remote login "${CONAN_REMOTE_NAME}" "${{ secrets.CONAN_REMOTE_USERNAME }}" --password "${{ secrets.CONAN_REMOTE_PASSWORD }}"
+        run: conan remote login "${CONAN_REMOTE_NAME}" "${{ secrets.NEXUS_REMOTE_USERNAME }}" --password "${{ secrets.NEXUS_REMOTE_PASSWORD }}"
 
       - name: Upload Conan packages
         if: ${{ github.repository == 'XRPLF/rippled' && (github.event_name == 'push' || github.event_name == 'workflow_dispatch') }}
         env:
           FORCE_OPTION: ${{ github.event.inputs.force_upload == 'true' && '--force' || '' }}
+          CONAN_LOGIN_USERNAME_XRPLF: ${{ secrets.NEXUS_REMOTE_USERNAME }}
+          CONAN_PASSWORD_XRPLF: ${{ secrets.NEXUS_REMOTE_PASSWORD }}
         run: conan upload "*" --remote="${CONAN_REMOTE_NAME}" --confirm ${FORCE_OPTION}

.gitignore

@@ -81,6 +81,9 @@ DerivedData
 # Python
 __pycache__
 
+# Rust build artifacts.
+target/
+
 # Direnv's directory
 /.direnv
 

.pre-commit-config.yaml

@@ -15,6 +15,7 @@ repos:
     hooks:
       - id: check-added-large-files
         args: [--maxkb=400, --enforce-all]
+      - id: check-executables-have-shebangs
       - id: trailing-whitespace
       - id: end-of-file-fixer
       - id: check-merge-conflict
@@ -27,30 +28,47 @@ repos:
         entry: ./bin/pre-commit/clang_tidy_check.py
         language: python
         types_or: [c++, c]
-        exclude: ^include/xrpl/protocol_autogen
-        pass_filenames: false # script determines the staged files itself
+        # .ipp fragments are included by their owning header rather than compiled
+        # as standalone translation units, so they have no compile_commands.json
+        # entry to lint (verify_headers checks them transitively).
+        exclude: '^include/xrpl/protocol_autogen|\.ipp$'
+        # run-clang-tidy --fix may edit headers included by files it is not run on,
+        # so pre-commit must not split the files across parallel hook invocations.
+        # The script determines the staged files itself and lets run-clang-tidy
+        # handle parallelism internally.
+        pass_filenames: false
       - id: fix-include-style
         name: fix include style
         entry: ./bin/pre-commit/fix_include_style.py
         language: python
         types_or: [c++, c]
         exclude: ^include/xrpl/protocol_autogen/(transactions|ledger_entries)/
+      - id: fix-pragma-once
+        name: fix missing '#pragma once' declarations in header files
+        language: python
+        entry: ./bin/pre-commit/fix_pragma_once.py
+        files: \.(h|hpp)$
+      - id: check-doxygen-style
+        name: check Doxygen comment style
+        entry: ./bin/pre-commit/check_doxygen_style.py
+        language: python
+        types_or: [c++, c]
 
   - repo: https://github.com/pre-commit/mirrors-clang-format
-    rev: dd18dad857d6133e90bbe478f4f2f22ec0030269 # frozen: v22.1.5
+    rev: f4d7745e17a28aad7eed2f4874ca8d1568c11c4c # frozen: v22.1.8
     hooks:
       - id: clang-format
         args: [--style=file]
-        "types_or": [c++, c, proto]
+        types_or: [c++, c, proto]
         exclude: ^include/xrpl/protocol_autogen/(transactions|ledger_entries)/
 
   - repo: https://github.com/BlankSpruce/gersemi-pre-commit
-    rev: faadd6a9d852369ca94f4d15b2404c967ba8cb01 # frozen: 0.27.6
+    rev: e98930bdc210d3387007f9252d8c1694ea7e410f # frozen: 0.27.7
     hooks:
       - id: gersemi
 
   - repo: https://github.com/rbubley/mirrors-prettier
-    rev: 515f543f5718ebfd6ce22e16708bb32c68ff96e1 # frozen: v3.8.3
+    rev: 9337a74165b178ae2c766f60bee7252a0f06f3e8 # frozen: v3.9.5
     hooks:
       - id: prettier
         args: [--end-of-line=auto]
@@ -80,22 +98,21 @@ repos:
         files: \.md$
 
   - repo: https://github.com/streetsidesoftware/cspell-cli
-    rev: 4643f154907327ee0a2c7038f0296e0dd77d9776 # frozen: v10.0.0
+    rev: ea11f9efc0bec520073405bc30552da887ba71bc # frozen: v10.0.1
     hooks:
-      - id: cspell # Spell check changed files
+      - id: cspell
+        name: check changed files spelling
         exclude: |
           (?x)^(
-              .config/cspell.config.yaml|
+              \.cspell\.config\.yaml|
               include/xrpl/protocol_autogen/(transactions|ledger_entries)/.*
           )$
-      - id: cspell # Spell check the commit message
+      - id: cspell
         name: check commit message spelling
         args:
           - --no-must-find-files
           - --no-progress
           - --no-summary
-          - --files
-          - .git/COMMIT_EDITMSG
         stages: [commit-msg]
 
   - repo: local

API-CHANGELOG.md

@@ -28,6 +28,9 @@ This section contains changes targeting a future version.
 
 ### Additions
 
+- `account_tx`: Added an optional `delegate` request object to filter delegated transactions. The object requires `delegate_filter`, which must be either `actor` for transactions owned by the requested account but signed by another account, or `authorizer` for transactions signed by the requested account on behalf of another account. The optional `counter_party` account narrows the results to a specific signer/delegate for `actor` or a specific owner/delegator for `authorizer`. Malformed `delegate`, `delegate_filter`, and `counter_party` values return standard invalid field errors, and invalid account IDs return `actMalformed`.
+  When paginating delegate-filtered queries, a marker from a delegate-filtered query includes a `delegate` flag and is only valid for follow-up requests that also supply `delegate` (mixing marker conventions returns `invalidParams`). Because filtering is applied after the ledger scan, a page may contain fewer results than `limit` (possibly zero) while still returning a marker, so callers must continue until no marker is present.
+
 - `ledger_entry`, `account_objects`: The `Delegate` ledger entry now includes an optional `DestinationNode` field, which stores the index into the authorized account's owner directory. This field is present on entries created after bidirectional directory tracking was introduced and may appear in RPC responses for those entries. ([#6681](https://github.com/XRPLF/rippled/pull/6681))
 
 - `server_definitions`: Added the following new sections to the response ([#6321](https://github.com/XRPLF/rippled/pull/6321)):
@@ -39,6 +42,7 @@ This section contains changes targeting a future version.
 
 ### Bugfixes
 
+- `get_aggregate_price`: Duplicate entries in the `oracles` request array are now ignored. [#6586](https://github.com/XRPLF/rippled/pull/6586)
 - Peer Crawler: The `port` field in `overlay.active[]` now consistently returns an integer instead of a string for outbound peers. [#6318](https://github.com/XRPLF/rippled/pull/6318)
 - `ping`: The `ip` field is no longer returned as an empty string for proxied connections without a forwarded-for header. It is now omitted, consistent with the behavior for identified connections. [#6730](https://github.com/XRPLF/rippled/pull/6730)
 - gRPC `GetLedgerDiff`: Fixed error message that incorrectly said "base ledger not validated" when the desired ledger was not validated. [#6730](https://github.com/XRPLF/rippled/pull/6730)
@@ -50,6 +54,8 @@ This section contains changes targeting a future version.
 - `submit`: The `fail_hard` field now returns an error if the value is not a boolean. [#6529](https://github.com/XRPLF/rippled/pull/6529)
 - `subscribe`: The `taker` field in the `books` array now returns `actMalformed` instead of `badIssuer` if the value is not a valid account. [#6529](https://github.com/XRPLF/rippled/pull/6529)
 - Fixed a bug in `Forwarded` HTTP header parsing where the extracted IP address could be incorrect when no comma or semicolon delimiter follows the address. This could cause the server to misidentify a client's IP address when operating behind a reverse proxy. [#6529](https://github.com/XRPLF/rippled/pull/6529)
+- `gateway_balances`: The `account` and `ident` fields now return an `invalidParams` error if the value is not a string, instead of an `internal` error. [#7655](https://github.com/XRPLF/rippled/pull/7655)
+- `account_lines`: The `peer` field now returns an error if the value is not a string. [#7728](https://github.com/XRPLF/rippled/pull/7728)
 
 ## XRP Ledger server version 3.1.0
 

BUILD.md

@@ -1,26 +1,38 @@
-| :warning: **WARNING** :warning:                                                                                                                                                                                                |
-| ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
-| These instructions assume you have a C++ development environment ready with Git, Python, Conan, CMake, and a C++ compiler. For help setting one up on Linux, macOS, or Windows, [see this guide](./docs/build/environment.md). |
+| :warning: **WARNING** :warning:                                                                                                                                                                                                                                                                                                                                                                                                                                               |
+| ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
+| These instructions assume you have a C++ development environment ready with Git, Python, Conan, CMake, and a C++ compiler. For help setting one up on Linux, macOS, or Windows, [see this guide](./docs/build/environment.md).<br><br>These instructions also assume a basic familiarity with Conan and CMake. If you are unfamiliar with Conan, you can read our [crash course](./docs/build/conan.md) or the official [Getting Started][conan-getting-started] walkthrough. |
 
-> These instructions also assume a basic familiarity with Conan and CMake.
-> If you are unfamiliar with Conan, you can read our
-> [crash course](./docs/build/conan.md) or the official [Getting Started][3]
-> walkthrough.
+## Minimum Requirements
 
-## Branches
+For the hardware needed to run a node, see
+[System Requirements](https://xrpl.org/system-requirements.html).
 
-For a stable release, choose the `master` branch or one of the [tagged
-releases](https://github.com/XRPLF/rippled/releases).
+For the software needed to build xrpld, see the
+[environment setup guide](./docs/build/environment.md).
 
-```bash
-git checkout master
-```
+## Operating Systems
 
-For the latest release candidate, choose the `release` branch.
+### Linux
 
-```bash
-git checkout release
-```
+The Ubuntu Linux distribution has received the highest level of quality
+assurance, testing, and support. We also support Red Hat and use Debian
+internally.
+Our Linux CI tooling is distro-independent and uses a Nix-based environment, so it should be possible to build on other Linux distributions as well, although we have not tested them.
+
+### macOS
+
+Many `xrpld` engineers use macOS for development.
+The minimum supported version is macOS 15 (Sequoia).
+CI testing is done in macOS 26 (Tahoe), but the build defaults `CMAKE_OSX_DEPLOYMENT_TARGET` to 15.
+
+### Windows
+
+Windows is used by some engineers for development only, and is not recommended
+for production use.
+
+## Steps
+
+### Branches
 
 For the latest set of untested features, or to contribute, choose the `develop`
 branch.
@@ -29,303 +41,37 @@ branch.
 git checkout develop
 ```
 
-## Minimum Requirements
+For a release candidate, choose the relevant release branch, e.g.
+`release/3.2.x`.
 
-See [System Requirements](https://xrpl.org/system-requirements.html).
+```bash
+git checkout release/3.2.x
+```
 
-Building xrpld generally requires git, Python, Conan, CMake, and a C++
-compiler. Some guidance on setting up such a [C++ development environment can be
-found here](./docs/build/environment.md).
-
-- [Python 3.11](https://www.python.org/downloads/), or higher
-- [Conan 2.17](https://conan.io/downloads.html)[^1], or higher
-- [CMake 3.22](https://cmake.org/download/), or higher
-
-[^1]:
-    It is possible to build with Conan 1.60+, but the instructions are
-    significantly different, which is why we are not recommending it.
-
-`xrpld` is written in the C++20 dialect and includes the `<concepts>` header.
-The [minimum compiler versions][2] required are:
-
-| Compiler    | Version   |
-| ----------- | --------- |
-| GCC         | 12        |
-| Clang       | 16        |
-| Apple Clang | 16        |
-| MSVC        | 19.44[^3] |
-
-### Linux
-
-The Ubuntu Linux distribution has received the highest level of quality
-assurance, testing, and support. We also support Red Hat and use Debian
-internally.
-
-Here are [sample instructions for setting up a C++ development environment on
-Linux](./docs/build/environment.md#linux).
-
-### Mac
-
-Many xrpld engineers use macOS for development.
-
-Here are [sample instructions for setting up a C++ development environment on
-macOS](./docs/build/environment.md#macos).
-
-### Windows
-
-Windows is used by some engineers for development only.
-
-[^3]: Windows is not recommended for production use.
-
-## Steps
+For a stable release, choose one of the [tagged
+releases](https://github.com/XRPLF/rippled/releases).
 
 ### Set Up Conan
 
-After you have a [C++ development environment](./docs/build/environment.md) ready with Git, Python,
-Conan, CMake, and a C++ compiler, you may need to set up your Conan profile.
-
-These instructions assume a basic familiarity with Conan and CMake. If you are
-unfamiliar with Conan, then please read [this crash course](./docs/build/conan.md) or the official
-[Getting Started][3] walkthrough.
-
-#### Conan lockfile
-
-To achieve reproducible dependencies, we use a [Conan lockfile](https://docs.conan.io/2/tutorial/versioning/lockfiles.html),
-which has to be updated every time dependencies change.
-
-Please see the [instructions on how to regenerate the lockfile](conan/lockfile/README.md).
-
-#### Default profile
-
-We recommend that you import the provided `conan/profiles/default` profile:
+Once your [development environment](./docs/build/environment.md) is ready, set
+Conan up for this repository:
 
 ```bash
-conan config install conan/profiles/ -tf $(conan config home)/profiles/
+./conan/init.sh
 ```
 
-You can check your Conan profile by running:
+That installs our [`global.conf`](./conan/global.conf), our Conan
+[profiles](./conan/profiles), and the `xrplf` remote that hosts some of our
+dependencies. It honours `CONAN_HOME` and never deletes an existing Conan home,
+so it is safe to re-run — it only overwrites the files it manages.
 
-```bash
-conan profile show
-```
+> [!TIP]
+> In the [Nix development shell](./docs/build/nix.md#conan-configuration) this is
+> already done for you: the script runs on entry.
 
-#### Custom profile
-
-If the default profile does not work for you and you do not yet have a Conan
-profile, you can create one by running:
-
-```bash
-conan profile detect
-```
-
-You may need to make changes to the profile to suit your environment. You can
-refer to the provided `conan/profiles/default` profile for inspiration, and you
-may also need to apply the required [tweaks](#conan-profile-tweaks) to this
-default profile.
-
-### Patched recipes
-
-Occasionally, we need patched recipes or recipes not present in Conan Center.
-We maintain a fork of the Conan Center Index
-[here](https://github.com/XRPLF/conan-center-index/) containing the modified and newly added recipes.
-
-To ensure our patched recipes are used, you must add our Conan remote at a
-higher index than the default Conan Center remote, so it is consulted first. You
-can do this by running:
-
-```bash
-conan remote add --index 0 xrplf https://conan.ripplex.io
-```
-
-Alternatively, you can pull our recipes from the repository and export them locally:
-
-```bash
-# Define which recipes to export.
-recipes=('abseil' 'ed25519' 'mpt-crypto' 'openssl' 'secp256k1' 'snappy' 'soci' 'wasm-xrplf' 'wasmi')
-
-# Selectively check out the recipes from our CCI fork.
-cd external
-mkdir -p conan-center-index
-cd conan-center-index
-git init
-git remote add origin git@github.com:XRPLF/conan-center-index.git
-git sparse-checkout init
-for recipe in "${recipes[@]}"; do
-    echo "Checking out recipe '${recipe}'..."
-    git sparse-checkout add recipes/${recipe}
-done
-git fetch origin master
-git checkout master
-
-./export_all.sh
-cd ../../
-```
-
-In the case we switch to a newer version of a dependency that still requires a
-patch or add a new dependency, it will be necessary for you to pull in the changes and re-export the
-updated dependencies with the newer version. However, if we switch to a newer
-version that no longer requires a patch, no action is required on your part, as
-the new recipe will be automatically pulled from the official Conan Center.
-
-> [!NOTE]
-> You might need to add `--lockfile=""` to your `conan install` command
-> to avoid automatic use of the existing `conan.lock` file when you run
-> `conan export` manually on your machine
->
-> This is not recommended though, as you might end up using different revisions of recipes.
-
-### Conan profile tweaks
-
-#### Missing compiler version
-
-If you see an error similar to the following after running `conan profile show`:
-
-```text
-ERROR: Invalid setting '17' is not a valid 'settings.compiler.version' value.
-Possible values are ['5.0', '5.1', '6.0', '6.1', '7.0', '7.3', '8.0', '8.1',
-'9.0', '9.1', '10.0', '11.0', '12.0', '13', '13.0', '13.1', '14', '14.0', '15',
-'15.0', '16', '16.0']
-Read "http://docs.conan.io/2/knowledge/faq.html#error-invalid-setting"
-```
-
-you need to add your compiler to the list of compiler versions in
-`$(conan config home)/settings_user.yml`, by adding the required version number(s)
-to the `version` array specific for your compiler. For example:
-
-```yaml
-compiler:
-  apple-clang:
-    version: ["17.0"]
-```
-
-#### Multiple compilers
-
-If you have multiple compilers installed, make sure to select the one to use in
-your default Conan configuration **before** running `conan profile detect`, by
-setting the `CC` and `CXX` environment variables.
-
-For example, if you are running MacOS and have [homebrew
-LLVM@18](https://formulae.brew.sh/formula/llvm@18), and want to use it as a
-compiler in the new Conan profile:
-
-```bash
-export CC=$(brew --prefix llvm@18)/bin/clang
-export CXX=$(brew --prefix llvm@18)/bin/clang++
-conan profile detect
-```
-
-You should also explicitly set the path to the compiler in the profile file,
-which helps to avoid errors when `CC` and/or `CXX` are set and disagree with the
-selected Conan profile. For example:
-
-```text
-[conf]
-tools.build:compiler_executables={'c':'/usr/bin/gcc','cpp':'/usr/bin/g++'}
-```
-
-#### Multiple profiles
-
-You can manage multiple Conan profiles in the directory
-`$(conan config home)/profiles`, for example renaming `default` to a different
-name and then creating a new `default` profile for a different compiler.
-
-#### Select language
-
-The default profile created by Conan will typically select different C++ dialect
-than C++20 used by this project. You should set `20` in the profile line
-starting with `compiler.cppstd=`. For example:
-
-```bash
-sed -i.bak -e 's|^compiler\.cppstd=.*$|compiler.cppstd=20|' $(conan config home)/profiles/default
-```
-
-#### Select standard library in Linux
-
-**Linux** developers will commonly have a default Conan [profile][] that
-compiles with GCC and links with libstdc++. If you are linking with libstdc++
-(see profile setting `compiler.libcxx`), then you will need to choose the
-`libstdc++11` ABI:
-
-```bash
-sed -i.bak -e 's|^compiler\.libcxx=.*$|compiler.libcxx=libstdc++11|' $(conan config home)/profiles/default
-```
-
-#### Select architecture and runtime in Windows
-
-**Windows** developers may need to use the x64 native build tools. An easy way
-to do that is to run the shortcut "x64 Native Tools Command Prompt" for the
-version of Visual Studio that you have installed.
-
-Windows developers must also build `xrpld` and its dependencies for the x64
-architecture:
-
-```bash
-sed -i.bak -e 's|^arch=.*$|arch=x86_64|' $(conan config home)/profiles/default
-```
-
-**Windows** developers also must select static runtime:
-
-```bash
-sed -i.bak -e 's|^compiler\.runtime=.*$|compiler.runtime=static|' $(conan config home)/profiles/default
-```
-
-#### Clang workaround for grpc
-
-If your compiler is clang, version 19 or later, or apple-clang, version 17 or
-later, you may encounter a compilation error while building the `grpc`
-dependency:
-
-```text
-In file included from .../lib/promise/try_seq.h:26:
-.../lib/promise/detail/basic_seq.h:499:38: error: a template argument list is expected after a name prefixed by the template keyword [-Wmissing-template-arg-list-after-template-kw]
-  499 |                     Traits::template CallSeqFactory(f_, *cur_, std::move(arg)));
-      |                                      ^
-```
-
-The workaround for this error is to add two lines to profile:
-
-```text
-[conf]
-tools.build:cxxflags=['-Wno-missing-template-arg-list-after-template-kw']
-```
-
-#### Workaround for gcc 12
-
-If your compiler is gcc, version 12, and you have enabled `werr` option, you may
-encounter a compilation error such as:
-
-```text
-/usr/include/c++/12/bits/char_traits.h:435:56: error: 'void* __builtin_memcpy(void*, const void*, long unsigned int)' accessing 9223372036854775810 or more bytes at offsets [2, 9223372036854775807] and 1 may overlap up to 9223372036854775813 bytes at offset -3 [-Werror=restrict]
-  435 |         return static_cast<char_type*>(__builtin_memcpy(__s1, __s2, __n));
-      |                                        ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~
-cc1plus: all warnings being treated as errors
-```
-
-The workaround for this error is to add two lines to your profile:
-
-```text
-[conf]
-tools.build:cxxflags=['-Wno-restrict']
-```
-
-#### Workaround for clang 16
-
-If your compiler is clang, version 16, you may encounter compilation error such
-as:
-
-```text
-In file included from .../boost/beast/websocket/stream.hpp:2857:
-.../boost/beast/websocket/impl/read.hpp:695:17: error: call to 'async_teardown' is ambiguous
-                async_teardown(impl.role, impl.stream(),
-                ^~~~~~~~~~~~~~
-```
-
-The workaround for this error is to add two lines to your profile:
-
-```text
-[conf]
-tools.build:cxxflags=['-DBOOST_ASIO_DISABLE_CONCEPTS']
-```
+You can inspect the resulting profile with `conan profile show`. If it is not
+suitable for your environment, create a custom profile and pass it to Conan — see
+[Advanced Conan configuration](./docs/build/advanced_conan.md).
 
 ### Set Up Ccache
 
@@ -333,14 +79,7 @@ To speed up repeated compilations, we recommend that you install
 [ccache](https://ccache.dev), a tool that wraps your compiler so that it can
 cache build objects locally.
 
-#### Linux
-
-You can install it using the package manager, e.g. `sudo apt install ccache`
-(Ubuntu) or `sudo dnf install ccache` (RHEL).
-
-#### macOS
-
-You can install it using Homebrew, i.e. `brew install ccache`.
+On Linux and macOS, `ccache` is included in the [Nix development shell](./docs/build/nix.md).
 
 #### Windows
 
@@ -475,7 +214,17 @@ cmake --build . --target setup_code_gen  # create venv and install dependencies
 cmake --build . --target code_gen        # regenerate code
 ```
 
-The regenerated files should be committed alongside your changes.
+The same targets are also available as a standalone project, which does not
+need the dependencies to be configured first:
+
+```
+cmake -S cmake/codegen -B build/codegen
+cmake --build build/codegen --target setup_code_gen
+cmake --build build/codegen --target code_gen
+```
+
+The regenerated files should be committed alongside your changes. CI verifies
+that they are up-to-date.
 
 ## Coverage report
 
@@ -487,10 +236,14 @@ which is only enabled when the `coverage` option is set, e.g. with
 Prerequisites for the coverage report:
 
 - [gcovr tool][gcovr] (can be installed e.g. with [pip][python-pip])
-- `gcov` for GCC (installed with the compiler by default) or
-- `llvm-cov` for Clang (installed with the compiler by default)
+- `gcov` for GCC or `llvm-cov` for Clang, usually installed with the compiler
 - `Debug` build type
 
+> [!NOTE]
+> Clang coverage is not available in the [Nix development shell](./docs/build/nix.md#building-xrpld-in-the-nix-shell):
+> its `clang` shells do not ship `llvm-cov`. Use a `gcc` shell instead (`.#gcc`,
+> or `.#gcc-plain` on Linux), which provides a `gcov` matching its compiler.
+
 A coverage report is created when the following steps are completed, in order:
 
 1. `xrpld` binary built with instrumentation data, enabled by the `coverage`
@@ -547,21 +300,41 @@ See [Sanitizers docs](./docs/build/sanitizers.md) for more details.
 
 ## Options
 
-| Option     | Default Value | Description                                                    |
-| ---------- | ------------- | -------------------------------------------------------------- |
-| `assert`   | OFF           | Enable assertions.                                             |
-| `coverage` | OFF           | Prepare the coverage report.                                   |
-| `tests`    | OFF           | Build tests.                                                   |
-| `unity`    | OFF           | Configure a unity build.                                       |
-| `xrpld`    | OFF           | Build the xrpld application, and not just the libxrpl library. |
-| `werr`     | OFF           | Treat compilation warnings as errors                           |
-| `wextra`   | OFF           | Enable additional compilation warnings                         |
+| Option           | Default Value | Description                                                                   |
+| ---------------- | ------------- | ----------------------------------------------------------------------------- |
+| `assert`         | OFF           | Force enabling assertions.                                                    |
+| `coverage`       | OFF           | Prepare the coverage report.                                                  |
+| `tests`          | OFF           | Build tests.                                                                  |
+| `unity`          | OFF           | Configure a unity build.                                                      |
+| `verify_headers` | ON            | Make the `verify-headers` target available to compile each header on its own. |
+| `xrpld`          | OFF           | Build the xrpld application, and not just the libxrpl library.                |
+| `werr`           | OFF           | Treat compilation warnings as errors                                          |
+| `wextra`         | OFF           | Enable additional compilation warnings                                        |
 
-[Unity builds][5] may be faster for the first build (at the cost of much more
+[Unity builds][unity-build] may be faster for the first build (at the cost of much more
 memory) since they concatenate sources into fewer translation units. Non-unity
 builds may be faster for incremental builds, and can be helpful for detecting
 `#include` omissions.
 
+### Verifying headers
+
+The regular build only compiles `.cpp` files, so a header is only ever checked
+through whatever translation unit happens to include it. A header that forgets
+an `#include` is not caught as long as every `.cpp` that uses it includes its
+missing dependency first. The `verify_headers` option (ON by default) adds a
+`verify-headers` target that compiles every header on its own, which fails if a
+header is not self-contained:
+
+```bash
+cmake --build . --target verify-headers
+```
+
+The per-header objects are excluded from the `all` target, so a normal build
+never compiles them; they are built only through `verify-headers`. The generated
+translation units do appear in `compile_commands.json`, so clang-tidy (and
+clangd and IDEs) can lint each header on its own. Pass `-Dverify_headers=OFF` to
+omit them entirely.
+
 ## Troubleshooting
 
 ### Conan
@@ -583,14 +356,18 @@ After any updates or changes to dependencies, you may need to do the following:
    conan remove '*'
    ```
 
-3. Re-run [conan export](#patched-recipes) if needed.
-4. [Regenerate lockfile](#conan-lockfile).
+3. Re-run [conan export](./docs/build/advanced_conan.md#patched-recipes) if needed.
+4. [Regenerate lockfile](./docs/build/advanced_conan.md#conan-lockfile).
 5. Re-run [conan install](#build-and-test).
 
+If you are using the Nix development shell, whether prebuilt Conan binaries apply
+depends on your platform — see
+[Prebuilt packages](./docs/build/nix.md#prebuilt-packages).
+
 #### ERROR: Package not resolved
 
 If you're seeing an error like `ERROR: Package 'snappy/1.1.10' not resolved: Unable to find 'snappy/1.1.10#968fef506ff261592ec30c574d4a7809%1756234314.246' in remotes.`,
-please add `xrplf` remote or re-run `conan export` for [patched recipes](#patched-recipes).
+please [set Conan up](#set-up-conan) so the `xrplf` remote is configured, or re-run `conan export` for [patched recipes](./docs/build/advanced_conan.md#patched-recipes).
 
 ### `protobuf/port_def.inc` file not found
 
@@ -610,28 +387,8 @@ For example, if you want to build Debug:
 1. For conan install, pass `--settings build_type=Debug`
 2. For cmake, pass `-DCMAKE_BUILD_TYPE=Debug`
 
-## Add a Dependency
-
-If you want to experiment with a new package, follow these steps:
-
-1. Search for the package on [Conan Center](https://conan.io/center/).
-2. Modify [`conanfile.py`](./conanfile.py):
-   - Add a version of the package to the `requires` property.
-   - Change any default options for the package by adding them to the
-     `default_options` property (with syntax `'$package:$option': $value`).
-3. Modify [`CMakeLists.txt`](./CMakeLists.txt):
-   - Add a call to `find_package($package REQUIRED)`.
-   - Link a library from the package to the target `xrpl_libs`
-     (search for the existing call to `target_link_libraries(xrpl_libs INTERFACE ...)`).
-4. Start coding! Don't forget to include whatever headers you need from the package.
-
-[1]: https://github.com/conan-io/conan-center-index/issues/13168
-[2]: https://en.cppreference.com/w/cpp/compiler_support/20
-[3]: https://docs.conan.io/en/latest/getting_started.html
-[5]: https://en.wikipedia.org/wiki/Unity_build
-[6]: https://github.com/boostorg/beast/issues/2648
-[7]: https://github.com/boostorg/beast/issues/2661
+[conan-getting-started]: https://docs.conan.io/en/latest/getting_started.html
+[unity-build]: https://en.wikipedia.org/wiki/Unity_build
 [gcovr]: https://gcovr.com/en/stable/getting-started.html
 [python-pip]: https://packaging.python.org/en/latest/guides/installing-using-pip-and-virtual-environments/
 [build_type]: https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html
-[profile]: https://docs.conan.io/en/latest/reference/profiles.html

CMakeLists.txt

@@ -13,9 +13,26 @@ if(DEFINED CMAKE_MODULE_PATH)
 endif()
 list(APPEND CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/cmake")
 
+# Must be set before project() because project() consumes it when configuring the compiler and SDK.
+# A user-provided -DCMAKE_OSX_DEPLOYMENT_TARGET still takes precedence.
+#
+# CMAKE_SYSTEM_NAME can't be used before project(), so CMAKE_HOST_SYSTEM_NAME is used instead.
+#
+# When CMAKE_OSX_DEPLOYMENT_TARGET is bumped to >=26.0, FastFloat dependency won't be needed anymore
+if(
+    CMAKE_HOST_SYSTEM_NAME STREQUAL "Darwin"
+    AND NOT DEFINED CMAKE_OSX_DEPLOYMENT_TARGET
+)
+    set(CMAKE_OSX_DEPLOYMENT_TARGET
+        "15.0"
+        CACHE STRING
+        "Minimum macOS deployment version"
+    )
+endif()
+
 project(xrpl)
 set(CMAKE_CXX_EXTENSIONS OFF)
-set(CMAKE_CXX_STANDARD 20)
+set(CMAKE_CXX_STANDARD 23)
 set(CMAKE_CXX_STANDARD_REQUIRED ON)
 set(CMAKE_EXPORT_COMPILE_COMMANDS ON)
 
@@ -57,6 +74,8 @@ if(target)
     )
 endif()
 
+include(PatchNixBinary)
+
 include(XrplSanity)
 include(XrplVersion)
 include(XrplSettings)
@@ -85,9 +104,11 @@ include(deps/Boost)
 add_subdirectory(external/antithesis-sdk)
 find_package(date REQUIRED)
 find_package(ed25519 REQUIRED)
+find_package(FastFloat REQUIRED)
 find_package(gRPC REQUIRED)
 find_package(LibArchive REQUIRED)
 find_package(lz4 REQUIRED)
+find_package(mpt-crypto REQUIRED)
 find_package(nudb REQUIRED)
 find_package(OpenSSL REQUIRED)
 find_package(secp256k1 REQUIRED)
@@ -99,7 +120,9 @@ target_link_libraries(
     xrpl_libs
     INTERFACE
         ed25519::ed25519
+        FastFloat::fast_float
         lz4::lz4
+        mpt-crypto::mpt-crypto
         OpenSSL::Crypto
         OpenSSL::SSL
         secp256k1::secp256k1
@@ -127,6 +150,10 @@ else()
 endif()
 target_link_libraries(xrpl_libs INTERFACE ${nudb})
 
+if(benchmark)
+    find_package(benchmark REQUIRED)
+endif()
+
 if(coverage)
     include(XrplCov)
 endif()
@@ -134,10 +161,16 @@ endif()
 include(XrplCore)
 include(XrplProtocolAutogen)
 include(XrplInstall)
-include(XrplPackaging)
 include(XrplValidatorKeys)
+# Must come after XrplValidatorKeys: the 'package' target depends on the
+# validator-keys target existing.
+include(XrplPackaging)
 
 if(tests)
     include(CTest)
     add_subdirectory(src/tests/libxrpl)
 endif()
+
+if(benchmark)
+    add_subdirectory(src/benchmarks/libxrpl)
+endif()

CODEOWNERS

@@ -0,0 +1,4 @@
+# By default, anyone can review changes.
+
+# The CI tooling team should review changes to the CI configuration.
+/.github/ @XRPLF/ci-tooling

CONTRIBUTING.md

@@ -14,9 +14,9 @@ The following branches exist in the main project repository:
 
 - `develop`: The latest set of unreleased features, and the most common
   starting point for contributions.
-- `release`: The latest beta release or release candidate.
-- `master`: The latest stable release.
-- `gh-pages`: The documentation for this project, built by Doxygen.
+- `release/*` (e.g. `release/3.2.x`): Release branches, one per release line,
+  holding the latest release candidate, or stable release for that line.
+  Stable releases are published as [tagged releases](https://github.com/XRPLF/rippled/releases).
 
 The tip of each branch must be signed. In order for GitHub to sign a
 squashed commit that it builds from your pull request, GitHub must know
@@ -83,8 +83,11 @@ If you create new source files, they must be organized as follows:
   `src/libxrpl`.
 - All other non-test files must go under `src/xrpld`.
 - All test source files must go under `src/test`.
+- All benchmark source files must go under `src/benchmarks`.
 
-The source must be formatted according to the style guide below.
+The source must be formatted according to the style guide below. The easiest
+way to satisfy this is to install the [`pre-commit`](#pre-commit-hooks) hooks,
+which format and lint your changes automatically on every commit.
 
 Header includes must be [levelized](.github/scripts/levelization).
 
@@ -130,11 +133,9 @@ tl;dr
 ## Pull requests
 
 In general, pull requests use `develop` as the base branch.
-The exceptions are
 
-- Fixes and improvements to a release candidate use `release` as the
-  base.
-- Hotfixes use `master` as the base.
+The exceptions are fixes, improvements, and hotfixes for an existing release,
+which use that release's branch (e.g. `release/3.2.x`) as the base.
 
 If your changes are not quite ready, but you want to make it easily available
 for preliminary examination or review, you can create a "Draft" pull request.
@@ -214,13 +215,61 @@ This is a non-exhaustive list of recommended style guidelines. These are
 not always strictly enforced and serve as a way to keep the codebase
 coherent rather than a set of _thou shalt not_ commandments.
 
+## Pre-commit hooks
+
+We use the [`pre-commit`](https://pre-commit.com/) framework to run the
+formatting and linting tools that keep the codebase consistent. `pre-commit`
+runs each tool configured in
+[`.pre-commit-config.yaml`](./.pre-commit-config.yaml) in its own isolated
+environment, so you don't need to install most of the individual tools
+yourself. The version of each hook sourced from an external repository
+(`clang-format`, `gersemi`, etc.) is pinned in that file, so running the hooks
+locally uses exactly the same versions as CI. A few `local` hooks — most notably
+`clang-tidy` — run tools from your own environment; see
+[Installing clang-tidy](#installing-clang-tidy) for how to get those.
+
+To get started, install `pre-commit` and enable the git hook scripts:
+
+```bash
+pip install pre-commit
+pre-commit install
+```
+
+Once installed, the hooks run automatically on your staged files every time you
+`git commit`. You can also run them on demand:
+
+```bash
+# Run all hooks against only the staged files
+pre-commit run
+
+# Run all hooks against every file in the repository
+pre-commit run --all-files
+
+# Run a single hook (e.g. clang-format) against all files
+pre-commit run clang-format --all-files
+```
+
+The hooks configured in this repository include, among others:
+
+- `clang-format` — C++/proto formatting (see [Formatting](#formatting))
+- `clang-tidy` — C++ static analysis (see [Clang-tidy](#clang-tidy)); opt in with `TIDY=1`
+- `fix-include-style`, `fix-pragma-once`, `check-doxygen-style` — C++ hygiene
+- `gersemi` — CMake formatting
+- `prettier`, `black`, `shfmt` — formatting for JavaScript/JSON/Markdown, Python, and shell
+- `cspell` — spell checking
+
+The same hooks run in CI on every pull request, so running them locally before
+you push helps you avoid CI failures.
+
 ## Formatting
 
-All code must conform to `clang-format` version 21,
-according to the settings in [`.clang-format`](./.clang-format),
-unless the result would be unreasonably difficult to read or maintain.
-To demarcate lines that should be left as-is, surround them with comments like
-this:
+All code must conform to `clang-format`, according to the settings in
+[`.clang-format`](./.clang-format), unless the result would be unreasonably
+difficult to read or maintain. The `clang-format` version is pinned in
+[`.pre-commit-config.yaml`](./.pre-commit-config.yaml), so the
+[`pre-commit`](#pre-commit-hooks) hook always formats with the same version as
+CI. To demarcate lines that should be left as-is, surround them with comments
+like this:
 
 ```
 // clang-format off
@@ -228,9 +277,21 @@ this:
 // clang-format on
 ```
 
-You can format individual files in place by running `clang-format -i <file>...`
+The easiest way to format your changes is to let the `pre-commit` hook run
+automatically on commit, or to run it manually:
+
+```bash
+pre-commit run clang-format --all-files
+```
+
+You can also format individual files in place by running `clang-format -i <file>...`
 from any directory within this project.
 
+> [!NOTE]
+> This uses whatever `clang-format` version is installed locally, which may
+> differ from the pinned version used by `pre-commit` and CI, so the results
+> can vary.
+
 There is a Continuous Integration job that runs clang-format on pull requests. If the code doesn't comply, a patch file that corrects auto-fixable formatting issues is generated.
 
 To download the patch file:
@@ -241,13 +302,6 @@ To download the patch file:
 4. Download the zip file and extract it to your local git repository. Run `git apply [patch-file-name]`.
 5. Commit and push.
 
-You can install a pre-commit hook to automatically run `clang-format` before every commit:
-
-```
-pip3 install pre-commit
-pre-commit install
-```
-
 ## Clang-tidy
 
 All code must pass `clang-tidy` checks according to the settings in [`.clang-tidy`](./.clang-tidy).
@@ -261,7 +315,7 @@ This ensures that configuration changes don't introduce new warnings across the
 
 ### Installing clang-tidy
 
-See the [environment setup guide](./docs/build/environment.md#clang-tidy) for platform-specific installation instructions.
+See the [environment setup guide](./docs/build/environment.md#clang-tidy) for how to get clang-tidy.
 
 ### Running clang-tidy locally
 
@@ -269,7 +323,7 @@ Before running clang-tidy, you must build the project to generate required files
 
 #### Via pre-commit (recommended)
 
-If you have already installed the pre-commit hooks (see above), you can run clang-tidy on your staged files using:
+If you have already installed the [`pre-commit`](#pre-commit-hooks) hooks, you can run clang-tidy on your staged files using:
 
 ```
 TIDY=1 pre-commit run clang-tidy
@@ -294,12 +348,14 @@ run-clang-tidy -p build -allow-no-checks src tests
 ```
 
 This will check all source files in the `src`, `include` and `tests` directories using the compile commands from your `build` directory.
-If you wish to automatically fix whatever clang-tidy finds _and_ is capable of fixing, add `-fix` to the above command:
+If you wish to automatically fix whatever clang-tidy finds _and_ is capable of fixing, add `-fix -format` to the above command:
 
 ```
-run-clang-tidy -p build -quiet -fix -allow-no-checks src tests
+run-clang-tidy -p build -quiet -fix -format -allow-no-checks src tests
 ```
 
+`-format` reformats the fixed code with [`.clang-format`](./.clang-format); without it the fixes are inserted in LLVM style and the `clang-format` hook rewrites them afterwards.
+
 ## Contracts and instrumentation
 
 We are using [Antithesis](https://antithesis.com/) for continuous fuzzing,

bin/check-tools.sh

@@ -0,0 +1,183 @@
+#!/usr/bin/env bash
+#
+# check-tools.sh — verify the xrpld development tooling is present and runnable.
+#
+# Works on Linux, macOS, and Windows (Git Bash / MSYS). For every expected tool
+# it runs a version probe, collecting anything that is missing or fails to run,
+# and prints a summary at the end (exiting non-zero if anything is missing).
+#
+# The tool set is platform-aware:
+#   - Linux:   the full Nix CI environment (see nix/packages.nix, nix/ci-env.nix),
+#              with GCC, Clang and the sanitizer/coverage tooling. This script is
+#              run during the Nix Docker image build (nix/docker/Dockerfile), so
+#              the Linux list is kept in sync with that environment.
+#   - macOS:   the same tooling, minus GCC/g++/gcov/mold
+#   - Windows: the core build tools only (CMake, Conan, Git, Python).
+#              MSVC is expected to be provided separately and is not checked here.
+#
+# Some tools (clang-format, doxygen, gcovr, gh, git-cliff, gpg, pre-commit,
+# run-clang-tidy) are present in our Linux CI images and in local development
+# setups, but not in the macOS CI environment. They are checked everywhere
+# except when running in CI on macOS.
+#
+# Environment variables:
+#   CI                      if set, skip the tools above when on macOS.
+#   CHECK_TOOLS_SKIP_CLONE  if set, skip the git-over-HTTPS connectivity check.
+
+set -uo pipefail
+
+missing=()
+checked=0
+
+# check <name> [probe-command...]
+# Runs the probe (default: "<name> --version"), capturing both stdout and
+# stderr, and prints one aligned line: the status, the name, and the first
+# non-blank line of the probe output (its version). Records <name> as missing
+# if the command is not found or exits non-zero.
+check() {
+    local name="$1"
+    shift
+    local -a probe=("$@")
+    if [ "${#probe[@]}" -eq 0 ]; then
+        probe=("${name}" --version)
+    fi
+
+    checked=$((checked + 1))
+    local output version
+    if output="$("${probe[@]}" 2>&1)"; then
+        version="$(printf '%s\n' "${output}" | grep -m1 '[^[:space:]]' || true)"
+        printf '  [ ok ] %-20s %s\n' "${name}" "${version}"
+    else
+        printf '  [MISS] %s\n' "${name}"
+        missing+=("${name}")
+    fi
+}
+
+case "$(uname -s)" in
+    Linux*) os=linux ;;
+    Darwin*) os=macos ;;
+    MINGW* | MSYS* | CYGWIN*) os=windows ;;
+    *)
+        echo "Unknown OS: $(uname -s)" >&2
+        exit 1
+        ;;
+esac
+
+echo "Detected OS: ${os} ($(uname -s) $(uname -m))"
+echo
+echo "Core build tools:"
+check cmake
+check conan
+check git
+if [ "${os}" = "windows" ]; then
+    check python python --version
+else
+    check python3
+fi
+
+# The full development toolchain. Available from Nix on Linux and macOS; on
+# Windows these are typically not installed, so they are skipped.
+if [ "${os}" = "linux" ] || [ "${os}" = "macos" ]; then
+    echo
+    echo "Development tooling:"
+    check ccache
+    check clang
+    check clang++
+    check ClangBuildAnalyzer
+    check curl
+    check file
+    check less
+    check make
+    # net-tools netstat reports "net-tools X.Y"; macOS ships BSD netstat with no
+    # version flag, so fall back to a presence marker there.
+    check netstat sh -c 'command -v netstat >/dev/null && { netstat --version 2>&1 | grep -m1 -oE "net-tools [0-9.]+" || echo present; }'
+    check ninja
+    check perl perl -e 'print "$^V\n"'
+    check pkg-config
+    check vim
+    check zip bash -c 'zip --version 2>&1 | grep -m1 -oE "Zip [0-9.]+"'
+
+    # These tools are present in our Linux CI images and in local development
+    # setups, but not in the macOS CI environment. So check them everywhere
+    # except when running in CI on macOS.
+    if [ "${os}" = "linux" ] || [ -z "${CI:-}" ]; then
+        check clang-format
+        check dot
+        check doxygen
+        check gcovr
+        check gh
+        check git-cliff
+        check git-lfs
+        check gpg
+        # pre-commit, or its alternative implementation prek
+        check pre-commit sh -c 'pre-commit --version || prek --version'
+        check run-clang-tidy run-clang-tidy --help
+    fi
+fi
+
+# Rust toolchain. Part of the Nix commonPackages, so available on both Linux
+# and macOS. The cargo plugins are invoked through cargo (`cargo <sub>`), which
+# resolves the matching `cargo-<sub>` binary on PATH; `--version` is offline and
+# does not need a Cargo project.
+if [ "${os}" = "linux" ] || [ "${os}" = "macos" ]; then
+    echo
+    echo "Rust toolchain:"
+    check cargo
+    check cargo-audit cargo audit --version
+    check cargo-llvm-cov cargo llvm-cov --version
+    check cargo-nextest cargo nextest --version
+    check clippy clippy-driver --version
+    check rust-analyzer
+    check rustc
+    check rustfmt
+fi
+
+# GCC is the default compiler on Linux. macOS uses the system Apple Clang
+# instead, so GCC/g++/gcov are not expected there.
+if [ "${os}" = "linux" ]; then
+    echo
+    echo "GCC toolchain:"
+    check gcc
+    check g++
+    check gcov
+
+    echo
+    echo "Mold:"
+    check mold
+fi
+
+if [ "${os}" = "windows" ]; then
+    echo
+    echo "Note: on Windows the C++ compiler is MSVC, which is provided"
+    echo "      separately (e.g. via Visual Studio) and is not checked here."
+fi
+
+# A simple test to verify that git can clone a repository over HTTPS
+# (i.e. the CA bundle is wired up). Clone to a temp dir and clean up.
+if [ -n "${CHECK_TOOLS_SKIP_CLONE:-}" ]; then
+    echo
+    echo "Skipping git-over-HTTPS check (CHECK_TOOLS_SKIP_CLONE is set)."
+else
+    echo
+    echo "Connectivity check:"
+    checked=$((checked + 1))
+    tmp_clone="$(mktemp -d)"
+    if git clone --depth 1 https://github.com/XRPLF/actions.git "${tmp_clone}/actions" >/dev/null 2>&1; then
+        printf '  [ ok ] git clone over HTTPS\n'
+    else
+        printf '  [MISS] git clone over HTTPS\n'
+        missing+=("git-https-clone")
+    fi
+    rm -rf "${tmp_clone}"
+fi
+
+echo
+if [ "${#missing[@]}" -eq 0 ]; then
+    echo "All ${checked} checked tools are present and runnable."
+else
+    echo "Missing or non-functional tools (${#missing[@]} of ${checked}):" >&2
+    for tool in "${missing[@]}"; do
+        echo "  - ${tool}" >&2
+    done
+    exit 1
+fi

bin/default-loader-path.sh

@@ -0,0 +1,12 @@
+#!/bin/bash
+
+case "$(uname -m)" in
+    x86_64) LOADER=/lib64/ld-linux-x86-64.so.2 ;;
+    aarch64) LOADER=/lib/ld-linux-aarch64.so.1 ;;
+    *)
+        echo "Unsupported arch: $(uname -m)" >&2
+        exit 1
+        ;;
+esac
+
+echo "${LOADER}"

bin/filter-clang-tidy.py

@@ -0,0 +1,102 @@
+#!/usr/bin/env python3
+
+"""
+Reduce run-clang-tidy output to its unique errors.
+
+It does two things:
+
+  1. Filters the raw output down to diagnostics and their source-context lines
+     (the indented "  103 | ..." / "      | ^" lines clang-tidy prints),
+     matching the "path:line:col: error:" diagnostic shape.
+
+  2. Deduplicates. The same diagnostic in a header is reported once per
+     translation unit that includes it, so identical error blocks are collapsed
+     to their first occurrence.
+
+An "error block" is an "error:" line together with the indented context lines
+and any "note:" lines that follow it (up to the next "error:" line). Blocks are
+compared as a whole, so an error stays attached to its own context, and
+first-occurrence order is preserved.
+
+The deduplicated output goes to stdout; a summary of unique error counts per
+check is printed to stderr.
+
+Usage:
+  bin/filter-clang-tidy.py [INPUT_FILE]            # read from file, or
+  run-clang-tidy ... | bin/filter-clang-tidy.py    # read from stdin
+"""
+
+import re
+import sys
+from collections import Counter
+
+# A clang-tidy diagnostic line looks like "path:line:col: error: msg [check]".
+# Matching on that shape (rather than a loose "error" substring) avoids treating
+# progress lines whose paths contain "error" as diagnostics, e.g.
+#   [284/850][0.7s] /nix/.../clang-tidy ... src/.../error.cpp
+DIAG_RE = re.compile(r":\d+:\d+: (?:error|warning|note):")
+ERROR_RE = re.compile(r":\d+:\d+: error:")
+CHECK_RE = re.compile(r" error: .*\[([^\],]+)")
+
+
+def filter_and_dedup(lines: list[str]) -> list[str]:
+    """Keep diagnostics with their context, then drop duplicate error blocks."""
+    blocks: list[str] = []
+    seen: set[str] = set()
+    current: list[str] = []
+
+    def flush() -> None:
+        if not current:
+            return
+        block = "".join(current)
+        if block not in seen:
+            seen.add(block)
+            blocks.append(block)
+
+    for line in lines:
+        # Keep only diagnostics and their indented source-context lines; drop
+        # progress/status output and blank lines.
+        if not (DIAG_RE.search(line) or line[:1] in (" ", "\t")):
+            continue
+        # An "error:" line starts a new block; its context and any following
+        # "note:" lines (and their context) belong to it.
+        if ERROR_RE.search(line):
+            flush()
+            current = []
+        current.append(line)
+    flush()
+
+    return blocks
+
+
+def summarize(blocks: list[str]) -> Counter[str]:
+    """Count unique errors per check name (e.g. "bugprone-branch-clone")."""
+    counts: Counter[str] = Counter()
+    for block in blocks:
+        # The error line is the first line of the block.
+        match = CHECK_RE.search(block.splitlines()[0])
+        if match:
+            counts[match.group(1)] += 1
+    return counts
+
+
+def main() -> int:
+    if len(sys.argv) > 1 and sys.argv[1] != "-":
+        with open(sys.argv[1], encoding="utf-8") as f:
+            lines = f.readlines()
+    else:
+        lines = sys.stdin.readlines()
+
+    blocks = filter_and_dedup(lines)
+    # Blank line between blocks so distinct errors are easy to tell apart.
+    sys.stdout.write("\n".join(blocks))
+
+    print("\nUnique errors per check:", file=sys.stderr)
+    for check, count in summarize(blocks).most_common():
+        print(f"{count:>4} {check}", file=sys.stderr)
+
+    return 0
+
+
+if __name__ == "__main__":
+    sys.exit(main())

bin/install-sanitizer-libs.sh

@@ -0,0 +1,113 @@
+#!/bin/bash
+# Install sanitizer runtime libraries required to run binaries compiled with:
+#   -fsanitize=address   → libasan.so.8
+#   -fsanitize=thread    → libtsan.so.2
+#   -fsanitize=undefined → libubsan.so.1
+#
+# The exact SONAMEs required depend on the compiler toolchain used to build the
+# test binaries (see nix/ci-env.nix). If the toolchain is bumped and SONAMEs
+# change, update the list below (or detect them from the binaries).
+#
+# Supported base images:
+#   debian:bookworm
+#   ubuntu:20.04
+#   rhel:9
+#   nixos/nix        — tests are skipped; this script is not called
+
+set -euo pipefail
+
+if [ ! -f /etc/os-release ]; then
+    echo "ERROR: /etc/os-release not found; cannot detect OS" >&2
+    exit 1
+fi
+
+# shellcheck source=/dev/null
+. /etc/os-release
+
+echo "Detected OS: ${ID} ${VERSION_ID:-}"
+
+case "${ID}" in
+    ubuntu | debian | rhel | centos | rocky | almalinux)
+        echo "Supported OS detected: ${ID}"
+        ;;
+    *)
+        echo "ERROR: unsupported OS '${ID}'. Supported: debian, ubuntu, rhel-family" >&2
+        exit 1
+        ;;
+esac
+
+function preinstall() {
+    case "${ID}" in
+        ubuntu)
+            apt-get update -y
+            apt-get install -y --no-install-recommends \
+                gnupg \
+                software-properties-common
+            add-apt-repository -y ppa:ubuntu-toolchain-r/test
+            ;;
+    esac
+}
+
+function install() {
+    case "${ID}" in
+        debian | ubuntu)
+            apt-get update -y
+            apt-get install -y --no-install-recommends \
+                libasan8 \
+                libtsan2 \
+                libubsan1
+            ;;
+
+        rhel | centos | rocky | almalinux)
+            dnf install -y \
+                libasan8 \
+                libtsan2 \
+                libubsan
+            ;;
+    esac
+}
+
+function postinstall() {
+    # Don't clear cache in non-CI environments
+    if [ -z "${CI:-}" ]; then
+        echo "Not running in CI environment; skipping cache cleanup"
+        return
+    fi
+
+    case "${ID}" in
+        debian | ubuntu)
+            apt-get clean
+            rm -rf /var/lib/apt/lists/*
+            ;;
+
+        rhel | centos | rocky | almalinux)
+            dnf clean -y all
+            rm -rf /var/cache/dnf/*
+            ;;
+    esac
+}
+
+function verify() {
+    # Verify that every expected library is now resolvable by the dynamic linker.
+    missing=0
+    for lib in libasan.so.8 libtsan.so.2 libubsan.so.1; do
+        if ldconfig -p | grep -q "${lib}"; then
+            echo "OK: ${lib} found"
+        else
+            echo "ERROR: ${lib} not found after installation" >&2
+            missing=$((missing + 1))
+        fi
+    done
+
+    if [ "${missing}" -ne 0 ]; then
+        echo "ERROR: ${missing} library/libraries missing" >&2
+        exit 1
+    fi
+}
+
+preinstall
+install
+postinstall
+verify
+
+echo "All sanitizer runtime libraries installed successfully."

bin/pre-commit/Dockerfile

@@ -0,0 +1,55 @@
+ARG BASE_IMAGE=ubuntu:26.04
+
+FROM ${BASE_IMAGE}
+
+SHELL ["/bin/bash", "-e", "-o", "pipefail", "-c"]
+ENTRYPOINT ["/bin/bash"]
+
+ARG DEBIAN_FRONTEND=noninteractive
+
+RUN <<EOF
+pkgs=()
+pkgs+=(curl)         # Required to install nix.
+pkgs+=(doxygen)      # Needed for Clio's check-doxygen-docs.sh.
+pkgs+=(git)          # Required for prepare-runner.
+pkgs+=(libatomic1)   # Required to run pre-commit provided `node`.
+pkgs+=(python3)      # Python 3 interpreter.
+pkgs+=(python3-pip)  # Package manager for Python applications.
+pkgs+=(xz-utils)     # Required to install nix
+
+apt-get update
+apt-get install -y --no-install-recommends "${pkgs[@]}"
+apt-get clean
+rm -rf /var/lib/apt/lists/*
+EOF
+
+ARG PRE_COMMIT_VERSION=4.6.0
+RUN pip install --no-cache --break-system-packages \
+    pre-commit==${PRE_COMMIT_VERSION}
+
+RUN sh <(curl --proto '=https' --tlsv1.2 -L https://nixos.org/nix/install) --daemon --yes
+
+# Add nix to PATH and set NIX environment variables,
+# so nix is available in all shells including non-interactive shells (e.g., GitHub Actions).
+ENV PATH="/nix/var/nix/profiles/default/bin:${PATH}"
+ENV NIX_PROFILES="/nix/var/nix/profiles/default"
+ENV NIX_SSL_CERT_FILE="/nix/var/nix/profiles/default/etc/ssl/certs/ca-bundle.crt"
+
+# Verify nix installation
+RUN nix --version
+
+ENV RUSTUP_HOME="/opt/rust/rustup"
+ENV CARGO_HOME="/opt/rust/cargo"
+ENV PATH="/opt/rust/cargo/bin:${PATH}"
+
+WORKDIR /tmp
+COPY rust-toolchain.toml /tmp/rust-toolchain.toml
+RUN <<EOF
+curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs \
+    | sh -s -- -y --no-modify-path --profile minimal --default-toolchain none
+rustup toolchain install
+rustup show
+cargo fmt --version
+EOF
+
+WORKDIR /

bin/pre-commit/check_doxygen_style.py

@@ -0,0 +1,440 @@
+#!/usr/bin/env python3
+"""
+Check C++ Doxygen comment style.
+
+Enforces the house convention for documentation comments:
+
+  * Use ``/** ... */`` blocks, not ``///``, ``//!`` or ``/*! ... */``; a plain
+    ``/* ... */`` that contains Doxygen commands is a doc comment missing its
+    second star. Trailing member-after comments use ``///<`` (not ``//!<``,
+    ``/*!< ... */`` or ``/**< ... */`` -- the block forms get reflowed and
+    mis-attached by clang-format on packed enum values, the line form does not).
+  * ``/**`` sits alone on its line; the closing ``*/`` sits alone on its line.
+  * Every content line is prefixed with `` * `` (no bare-indented continuation).
+  * The first content line is flush (not over-indented).
+  * Doxygen commands use the ``@cmd`` form, not ``\\cmd``.
+  * Use ``@return`` / ``@throws`` rather than prose ``Returns:`` / ``Throws:``.
+  * A plain ``//`` comment carrying a block-level ``@command`` (``@param``,
+    ``@return``, ``@see``, ...) is documentation and must be a ``/** ... */``
+    block (Doxygen ignores ``//``).
+  * Use canonical command spellings: ``@return`` (not ``@returns``),
+    ``@throws`` (not ``@throw``), ``@see`` (not ``@sa``).
+  * Order block tags ``@tparam`` -> ``@param`` -> ``@return``. (Whether
+    ``@param`` order matches the signature is not checked here -- too fragile to
+    parse; Doxygen's WARN_IF_DOC_ERROR covers name mismatches.)
+  * One-liners are expanded to three lines, EXCEPT bare markers ``@{`` / ``@}``
+    / ``@cond [label]`` / ``@endcond`` / ``@file [name]`` which stay on one line.
+
+Left intentionally alone (recognized, valid Doxygen that is not this style's
+concern):
+
+  * ``///<`` trailing "member-after" comments (the house form).
+  * Divider lines made only of slashes (``//////////``).
+  * Plain ``/* ... */`` (non-Doxygen) comments.
+
+Usage:
+    check_doxygen_style.py [FILE ...]      # explicit files
+    check_doxygen_style.py                 # default: src/ and include/ trees
+
+Exit status is non-zero if any violation is found.
+"""
+
+import argparse
+import re
+import sys
+from collections.abc import Iterable, Iterator
+from dataclasses import dataclass
+from enum import Enum
+from pathlib import Path
+
+
+class Category(Enum):
+    """A kind of style violation: a printed ``label`` and its ``description``.
+
+    The description is the default message; a few categories whose wording
+    depends on the offending text (see ``Finding.detail``) override it.
+    """
+
+    def __init__(self, label: str, description: str) -> None:
+        self.label = label
+        self.description = description
+
+    BACKSLASH_COMMAND = ("backslash-command", "use the @cmd form, not \\cmd")
+    WRONG_COMMAND = ("wrong-command", "use the canonical command spelling")
+    TRIPLE_SLASH = ("triple-slash", "use a /** ... */ block instead of ///")
+    QT_MEMBER = ("qt-member", "use ///< instead of //!<")
+    QT_LINE = ("qt-line", "use a /** ... */ block instead of //!")
+    BLOCK_MEMBER = ("block-member", "use ///< instead of /**<")
+    QT_BLOCK_MEMBER = ("qt-block-member", "use ///< instead of /*!<")
+    DOC_IN_LINE_COMMENT = (
+        "doc-in-line-comment",
+        "use a /** ... */ block for documentation, not //",
+    )
+    QT_COMMENT = ("qt-comment", "use /** instead of /*!")
+    SINGLE_LINE_BLOCK = (
+        "single-line-block",
+        "expand one-line /** ... */ to a multi-line block "
+        "(markers @{ @} @cond @endcond @file may stay)",
+    )
+    TEXT_ON_OPENER = ("text-on-opener", "move text off the /** opener line")
+    BARE_CONTINUATION = ("bare-continuation", 'prefix continuation lines with " * "')
+    OVER_INDENTED = ("over-indented", "first content line is over-indented")
+    OVER_INDENTED_TAG = (
+        "over-indented-tag",
+        'Doxygen tag over-indented; use a single space after "*"',
+    )
+    COMBINED_MARKER = (
+        "combined-marker",
+        "scope marker @{ / @} should be its own single-line /** @{ */ block",
+    )
+    PROSE_LABEL = ("prose-label", "use a Doxygen tag instead of a prose label")
+    CONTENT_ON_CLOSER = ("content-on-closer", "move content off the closing */ line")
+    PLAIN_BLOCK_DOC = (
+        "plain-block-doc",
+        "documentation comment must open with /** not /*",
+    )
+    TAG_ORDER = (
+        "tag-order",
+        "block tags out of order; expected @tparam, then @param, then @return",
+    )
+
+
+@dataclass(frozen=True)
+class Finding:
+    """A single style violation at a 1-based line number.
+
+    ``detail`` overrides the category's default description when the message
+    depends on the offending text (e.g. which command was misspelled).
+    """
+
+    line: int
+    category: Category
+    detail: str | None = None
+
+    @property
+    def message(self) -> str:
+        return self.detail if self.detail is not None else self.category.description
+
+
+DEFAULT_ROOTS = ("src", "include")
+EXTS = {".h", ".hpp", ".cpp", ".ipp", ".cxx", ".cc"}
+
+# Every Doxygen command we recognize when written with a backslash (\cmd).
+_ALL_COMMANDS = (
+    "brief|param|tparam|return|returns|retval|note|warning|pre|post|see|sa|ref|"
+    "throw|throws|exception|deprecated|details|code|endcode|verbatim|endverbatim|"
+    "li|arg|c|internal|since|todo|attention|remark|remarks|ingroup|defgroup"
+)
+# Block-level tags whose over-indentation we flag inside a block body.
+_BLOCK_TAGS = (
+    "param|tparam|returns?|retval|brief|throws?|note|warning|"
+    "pre|post|see|sa|details|deprecated"
+)
+# Tags that, appearing anywhere in a comment, mark it as documentation.
+_ANY_DOC_TAGS = (
+    "param|tparam|returns?|retval|brief|throws?|note|warning|pre|post|see|sa"
+)
+# Tags that make a plain // comment a mis-styled doc comment.
+_LINE_DOC_TAGS = "brief|param|tparam|returns?|retval|throws?|note|see|pre|post"
+
+# \cmd that should be @cmd.
+RE_BACKSLASH_CMD = re.compile(r"\\(" + _ALL_COMMANDS + r")\b")
+# Bare markers that may legitimately stay on a single line.
+RE_MARKER = re.compile(r"^@(\{|\}|cond(\s.*)?|endcond|file(\s.*)?)$")
+# Prose section labels that should be Doxygen tags.
+RE_PROSE_LABEL = re.compile(r"^\*\s(Returns|Throws|Exceptions):\s*$")
+# An over-indented block tag: "*" followed by 2+ spaces then the tag.
+RE_OVERINDENTED_TAG = re.compile(r"^\*\s{2,}@(" + _BLOCK_TAGS + r")\b")
+# Any documentation tag (used to spot a doc comment hiding in a plain /* */).
+RE_ANY_DOC_TAG = re.compile(r"@(" + _ANY_DOC_TAGS + r")\b")
+# A documentation tag inside a // comment.
+RE_LINE_DOC_TAG = re.compile(r"@(" + _LINE_DOC_TAGS + r")\b")
+# Order-relevant tags, for the @tparam -> @param -> @return ordering check.
+RE_ORDER_TAG = re.compile(r"^\*\s*@(param|tparam|returns?|retval)\b")
+# First content line indented by 2+ spaces after the "*".
+RE_FIRST_OVERINDENT = re.compile(r"^\s*\*\s{2,}\S")
+# A scope marker @{ / @} sharing a comment with other text.
+RE_COMBINED_MARKER = re.compile(r"^\*\s*@[{}]\s*$")
+
+# Non-canonical command spellings -> the house spelling (bare command names).
+# Used both to flag a wrong @form and to suggest the right @form for a \wrong.
+CANONICAL_COMMAND = {"returns": "return", "throw": "throws", "sa": "see"}
+WRONG_SPELLINGS = [
+    (re.compile(rf"@{wrong}\b"), f"@{right}")
+    for wrong, right in CANONICAL_COMMAND.items()
+]
+
+# Order block tags should appear in; a body out of this order is a violation.
+EXPECTED_TAG_ORDER = ("tparam", "param", "return")
+
+
+def is_doxy_open(stripped: str) -> bool:
+    """True for a line-start Doxygen block opener we should normalize."""
+    if stripped.startswith("/*!"):  # Qt-style Doxygen
+        return not stripped.startswith("/*!<")  # member-after, leave inline
+    return (
+        stripped.startswith("/**")
+        and not stripped.startswith("/***")
+        and not stripped.startswith("/**/")
+        and not stripped.startswith("/**<")
+    )
+
+
+def _flag_commands(raw_line: str, stripped: str, index: int) -> list[Finding]:
+    """Flag \\cmd and misspelled @cmd on a comment line (opener, body, or closer)."""
+    if not stripped.startswith(("*", "//", "/*")):
+        return []
+    findings: list[Finding] = []
+    backslash = RE_BACKSLASH_CMD.search(raw_line)
+    if backslash:
+        command = backslash.group(1)
+        canonical = CANONICAL_COMMAND.get(command, command)
+        findings.append(
+            Finding(
+                index + 1,
+                Category.BACKSLASH_COMMAND,
+                f"use @{canonical} instead of \\{command}",
+            )
+        )
+    for pattern, replacement in WRONG_SPELLINGS:
+        wrong = pattern.search(raw_line)
+        if wrong:
+            findings.append(
+                Finding(
+                    index + 1,
+                    Category.WRONG_COMMAND,
+                    f"use {replacement} instead of {wrong.group(0)}",
+                )
+            )
+    return findings
+
+
+def _flag_line_comment(raw_line: str, stripped: str, index: int) -> Finding | None:
+    """Return the finding for a single-line comment form (///, //!, /**<, ...), else None."""
+    if stripped.startswith("///") and not stripped.startswith(("////", "///<")):
+        return Finding(index + 1, Category.TRIPLE_SLASH)
+    if "//!<" in raw_line:
+        return Finding(index + 1, Category.QT_MEMBER)
+    if stripped.startswith("//!"):
+        return Finding(index + 1, Category.QT_LINE)
+    if "/**<" in raw_line:
+        return Finding(index + 1, Category.BLOCK_MEMBER)
+    if "/*!<" in raw_line:
+        return Finding(index + 1, Category.QT_BLOCK_MEMBER)
+    if stripped.startswith("//") and RE_LINE_DOC_TAG.search(stripped):
+        return Finding(index + 1, Category.DOC_IN_LINE_COMMENT)
+    return None
+
+
+def _flag_single_line_block(stripped: str, line_no: int, is_qt: bool) -> list[Finding]:
+    """Findings for a whole /** ... */ or /*! ... */ block on one line."""
+    inner = re.sub(r"^/\*[*!]", "", stripped)
+    inner = re.sub(r"\*/\s*$", "", inner).strip()
+    findings: list[Finding] = []
+    if is_qt:
+        findings.append(Finding(line_no, Category.QT_COMMENT))
+    if inner and not RE_MARKER.match(inner):
+        findings.append(Finding(line_no, Category.SINGLE_LINE_BLOCK))
+    return findings
+
+
+def _canonical_order_tag(body: str) -> str | None:
+    """The order-relevant tag (tparam/param/return) a body line opens with, if any."""
+    match = RE_ORDER_TAG.match(body)
+    if match is None:
+        return None
+    command = match.group(1)
+    return "return" if command in ("return", "returns", "retval") else command
+
+
+def _flag_body_line(
+    body_line: str, line_no: int, is_first_content: bool
+) -> list[Finding]:
+    """Findings for one interior line of a multi-line block."""
+    body = body_line.strip()
+    findings: list[Finding] = []
+    if body and not body.startswith("*"):
+        findings.append(Finding(line_no, Category.BARE_CONTINUATION))
+    if body.startswith("*"):
+        if is_first_content and RE_FIRST_OVERINDENT.match(body_line):
+            findings.append(Finding(line_no, Category.OVER_INDENTED))
+        if RE_OVERINDENTED_TAG.match(body):
+            findings.append(Finding(line_no, Category.OVER_INDENTED_TAG))
+        if RE_COMBINED_MARKER.match(body):
+            findings.append(Finding(line_no, Category.COMBINED_MARKER))
+        label = RE_PROSE_LABEL.match(body)
+        if label:
+            suggested_tag = "@return" if label.group(1) == "Returns" else "@throws"
+            findings.append(
+                Finding(
+                    line_no,
+                    Category.PROSE_LABEL,
+                    f'use {suggested_tag} instead of prose "{label.group(1)}:"',
+                )
+            )
+    return findings
+
+
+def _flag_closer(closer_line: str, line_no: int) -> list[Finding]:
+    """Findings for content sharing the closing */ line."""
+    before = closer_line[: closer_line.index("*/")].strip()
+    if before and before != "*":
+        return [Finding(line_no, Category.CONTENT_ON_CLOSER)]
+    return []
+
+
+def _flag_tag_order(first_tag_line: dict[str, int]) -> list[Finding]:
+    """One finding if the present block tags are not in EXPECTED_TAG_ORDER."""
+    tag_lines = [
+        first_tag_line[tag] for tag in EXPECTED_TAG_ORDER if tag in first_tag_line
+    ]
+    if tag_lines != sorted(tag_lines):
+        return [Finding(min(tag_lines), Category.TAG_ORDER)]
+    return []
+
+
+def _flag_doxy_block(lines: list[str], start: int) -> tuple[int, list[Finding]]:
+    """Handle a /** or /*! block opening at ``start``; return (next index, findings)."""
+    raw_line = lines[start]
+    stripped = raw_line.lstrip()
+    open_pos = raw_line.index("/*")
+    is_qt = stripped.startswith("/*!")
+
+    # A whole block on one line: /** ... */.
+    if "*/" in raw_line[open_pos + 2 :]:
+        return start + 1, _flag_single_line_block(stripped, start + 1, is_qt)
+
+    # Multi-line block: opener, then scan the body to the closer.
+    findings: list[Finding] = []
+    if is_qt:
+        findings.append(Finding(start + 1, Category.QT_COMMENT))
+    if raw_line[open_pos + 3 :].strip():
+        findings.append(Finding(start + 1, Category.TEXT_ON_OPENER))
+
+    line_count = len(lines)
+    cursor = start + 1
+    is_first_content = True
+    first_tag_line: dict[str, int] = {}  # canonical tag -> 1-based first line
+    while cursor < line_count and "*/" not in lines[cursor]:
+        body_line = lines[cursor]
+        body = body_line.strip()
+        findings.extend(_flag_commands(body_line, body, cursor))
+        tag = _canonical_order_tag(body)
+        if tag is not None:
+            first_tag_line.setdefault(tag, cursor + 1)
+        findings.extend(_flag_body_line(body_line, cursor + 1, is_first_content))
+        if body.startswith("*"):
+            is_first_content = False
+        cursor += 1
+
+    if cursor < line_count:
+        closer_line = lines[cursor]
+        findings.extend(_flag_commands(closer_line, closer_line.strip(), cursor))
+        findings.extend(_flag_closer(closer_line, cursor + 1))
+    findings.extend(_flag_tag_order(first_tag_line))
+
+    return cursor + 1, findings
+
+
+def _flag_plain_block(lines: list[str], start: int) -> tuple[int, list[Finding]]:
+    """Handle a line-start plain /* ... */ block; return (next index, findings).
+
+    Only flagged when it hides a documentation command (a missing second star).
+    """
+    line_count = len(lines)
+    cursor = start
+    while cursor < line_count and "*/" not in lines[cursor]:
+        cursor += 1
+    findings: list[Finding] = []
+    # The opener (start) is command-checked by check_file; check the rest here.
+    for i in range(start + 1, min(cursor + 1, line_count)):
+        findings.extend(_flag_commands(lines[i], lines[i].strip(), i))
+    block_text = "\n".join(
+        lines[start : cursor + 1] if cursor < line_count else lines[start:]
+    )
+    if RE_ANY_DOC_TAG.search(block_text):
+        findings.append(Finding(start + 1, Category.PLAIN_BLOCK_DOC))
+    next_index = cursor + 1 if cursor < line_count else line_count
+    return next_index, findings
+
+
+def check_source(text: str) -> list[Finding]:
+    """Return all style violations found in the given source text."""
+    lines = text.split("\n")
+    findings: list[Finding] = []
+    line_count = len(lines)
+    index = 0
+    in_plain_block = False  # inside a mid-line, non-Doxygen /* ... */
+    while index < line_count:
+        raw_line = lines[index]
+        stripped = raw_line.lstrip()
+
+        # Skip the interior of a plain block opened on an earlier line.
+        if in_plain_block:
+            in_plain_block = "*/" not in raw_line
+            index += 1
+            continue
+
+        findings.extend(_flag_commands(raw_line, stripped, index))
+
+        line_finding = _flag_line_comment(raw_line, stripped, index)
+        if line_finding is not None:
+            findings.append(line_finding)
+            index += 1
+        elif is_doxy_open(stripped):
+            index, block_findings = _flag_doxy_block(lines, index)
+            findings.extend(block_findings)
+        elif stripped.startswith("/*"):
+            index, block_findings = _flag_plain_block(lines, index)
+            findings.extend(block_findings)
+        else:
+            # A /* that opens mid-line without closing starts a plain block.
+            if "/*" in raw_line and not stripped.startswith("//"):
+                if "*/" not in raw_line[raw_line.index("/*") + 2 :]:
+                    in_plain_block = True
+            index += 1
+    return findings
+
+
+def check_file(path: Path) -> list[Finding]:
+    """Return all style violations found in one file."""
+    return check_source(path.read_text(encoding="utf-8"))
+
+
+def iter_files(paths: Iterable[str]) -> Iterator[Path]:
+    """Yield every C++ source file among the given files and directories."""
+    for raw_path in paths:
+        path = Path(raw_path)
+        if path.is_dir():
+            for candidate in path.rglob("*"):
+                if candidate.is_file() and candidate.suffix in EXTS:
+                    yield candidate
+        elif path.suffix in EXTS:
+            yield path
+
+
+def main() -> int:
+    parser = argparse.ArgumentParser(description="Check Doxygen comment style.")
+    parser.add_argument(
+        "files", nargs="*", help="files or directories (default: src/ include/)"
+    )
+    parser.add_argument(
+        "-q", "--quiet", action="store_true", help="only print the summary count"
+    )
+    args = parser.parse_args()
+    roots = args.files or [root for root in DEFAULT_ROOTS if Path(root).is_dir()]
+
+    total = 0
+    for path in sorted(set(iter_files(roots)), key=str):
+        for finding in check_file(path):
+            total += 1
+            if not args.quiet:
+                print(
+                    f"{path}:{finding.line}: {finding.category.label}: {finding.message}"
+                )
+    print(f"\n{total} doxygen-style violation(s)", file=sys.stderr)
+    return 1 if total else 0
+
+
+if __name__ == "__main__":
+    sys.exit(main())

bin/pre-commit/clang_tidy_check.py

@@ -1,24 +1,46 @@
 #!/usr/bin/env python3
-"""Pre-commit hook that runs clang-tidy on changed files using run-clang-tidy."""
+"""Pre-commit hook that runs clang-tidy on staged files using run-clang-tidy.
+
+The script determines the staged files itself (see `pass_filenames: false` in
+.pre-commit-config.yaml) so run-clang-tidy is run once and handles parallelism
+internally: pre-commit would otherwise split the files across parallel hook
+invocations that race when fixes edit a shared header.
+
+Fixes are collected with `-export-fixes` and applied by clang-apply-replacements
+in a separate step rather than with run-clang-tidy's `-fix`. The `add_module`
+build isolates each module's headers behind a per-module symlink directory
+(build/modules/<module>/...), so a header reachable from several translation
+units is referenced through different paths that all resolve to the same source
+file. clang-apply-replacements deduplicates identical replacements by their
+literal path, so those paths must be canonicalised to the real source path
+first; otherwise the same fix is applied once per path and corrupts the header.
+"""
 
 from __future__ import annotations
 
-import json
 import os
 import re
 import shutil
 import subprocess
 import sys
-from collections import defaultdict
+import tempfile
 from pathlib import Path
 
-HEADER_EXTENSIONS = {".h", ".hpp", ".ipp"}
-SOURCE_EXTENSIONS = {".cpp"}
-INCLUDE_RE = re.compile(r"^\s*#\s*include\s*[<\"]([^>\"]+)[>\"]")
+CLANG_TIDY_VERSION = 22
+
+# Extensions run-clang-tidy can analyse: `.cpp` translation units and, thanks to
+# the `verify_headers` build option, `.h`/`.hpp` headers (each has its own
+# compile_commands.json entry). `.ipp` fragments have no entry and are skipped.
+TIDY_EXTENSIONS = {".cpp", ".h", ".hpp"}
+
+# A single-quoted `FilePath:` entry in an -export-fixes YAML file, allowing the
+# `- ` marker that precedes it inside a `Replacements:` sequence. clang-tidy
+# emits paths single-quoted and doubles any embedded quote per YAML rules.
+FILEPATH_RE = re.compile(r"^(\s*(?:-\s+)?FilePath:\s*)'((?:[^']|'')*)'\s*$")
 
 
-def find_run_clang_tidy() -> str | None:
-    for candidate in ("run-clang-tidy-21", "run-clang-tidy"):
+def find_tool(name: str) -> str | None:
+    for candidate in (f"{name}-{CLANG_TIDY_VERSION}", name):
         if path := shutil.which(candidate):
             return path
     return None
@@ -32,136 +54,37 @@ def find_build_dir(repo_root: Path) -> Path | None:
     return None
 
 
-def build_include_graph(build_dir: Path, repo_root: Path) -> tuple[dict, set]:
+def staged_files(repo_root: Path) -> list[Path]:
+    """Return absolute paths of staged, lint-able C/C++ files.
+
+    `--diff-filter=d` excludes deletions so we never lint a removed file.
     """
-    Scan all files reachable from compile_commands.json and build an inverted include graph.
-
-    Returns:
-        inverted: header_path -> set of files that include it
-        source_files: set of all TU paths from compile_commands.json
-    """
-    with open(build_dir / "compile_commands.json") as f:
-        db = json.load(f)
-
-    source_files = {Path(e["file"]).resolve() for e in db}
-    include_roots = [repo_root / "include", repo_root / "src"]
-    inverted: dict[Path, set[Path]] = defaultdict(set)
-
-    to_scan: set[Path] = set(source_files)
-    scanned: set[Path] = set()
-
-    while to_scan:
-        file = to_scan.pop()
-        if file in scanned or not file.exists():
-            continue
-        scanned.add(file)
-
-        content = file.read_text()
-
-        for line in content.splitlines():
-            m = INCLUDE_RE.match(line)
-            if not m:
-                continue
-            for root in include_roots:
-                candidate = (root / m.group(1)).resolve()
-                if candidate.exists():
-                    inverted[candidate].add(file)
-                    if candidate not in scanned:
-                        to_scan.add(candidate)
-                    break
-
-    return inverted, source_files
-
-
-def find_tus_for_headers(
-    headers: list[Path],
-    inverted: dict[Path, set[Path]],
-    source_files: set[Path],
-) -> set[Path]:
-    """
-    For each header, pick one TU that transitively includes it.
-    Prefers a TU whose stem matches the header's stem, otherwise picks the first found.
-    """
-    result: set[Path] = set()
-
-    for header in headers:
-        preferred: Path | None = None
-        visited: set[Path] = {header}
-        stack: list[Path] = [header]
-
-        while stack:
-            h = stack.pop()
-            for inc in inverted.get(h, ()):
-                if inc in source_files:
-                    if inc.stem == header.stem:
-                        preferred = inc
-                        break
-                    if preferred is None:
-                        preferred = inc
-                if inc not in visited:
-                    visited.add(inc)
-                    stack.append(inc)
-            if preferred is not None and preferred.stem == header.stem:
-                break
-
-        if preferred is not None:
-            result.add(preferred)
-
-    return result
-
-
-def resolve_files(
-    input_files: list[str], build_dir: Path, repo_root: Path
-) -> list[str]:
-    """
-    Split input into source files and headers. Source files are passed through;
-    headers are resolved to the TUs that transitively include them.
-    """
-    sources: list[Path] = []
-    headers: list[Path] = []
-
-    for f in input_files:
-        p = Path(f).resolve()
-        if p.suffix in SOURCE_EXTENSIONS:
-            sources.append(p)
-        elif p.suffix in HEADER_EXTENSIONS:
-            headers.append(p)
-
-    if not headers:
-        return [str(p) for p in sources]
-
-    print(
-        f"Resolving {len(headers)} header(s) to compilation units...", file=sys.stderr
-    )
-    inverted, source_files = build_include_graph(build_dir, repo_root)
-    tus = find_tus_for_headers(headers, inverted, source_files)
-
-    if not tus:
-        print(
-            "Warning: no compilation units found that include the modified headers; "
-            "skipping clang-tidy for headers.",
-            file=sys.stderr,
-        )
-
-    return sorted({str(p) for p in (*sources, *tus)})
-
-
-def staged_files(repo_root: Path) -> list[str]:
-    result = subprocess.run(
-        ["git", "diff", "--staged", "--name-only", "--diff-filter=d"],
-        capture_output=True,
+    output = subprocess.check_output(
+        ["git", "diff", "--staged", "--name-only", "--diff-filter=d", "--"]
+        + [f"*{ext}" for ext in TIDY_EXTENSIONS],
         text=True,
         cwd=repo_root,
     )
-    if result.returncode != 0:
-        print(
-            "clang-tidy check failed: 'git diff --staged' command failed.",
-            file=sys.stderr,
-        )
-        if result.stderr:
-            print(result.stderr, file=sys.stderr)
-        sys.exit(result.returncode or 1)
-    return [str(repo_root / p) for p in result.stdout.splitlines() if p]
+    return [repo_root / rel for rel in output.splitlines() if rel]
+
+
+def canonicalize_fix_paths(fixes_dir: Path) -> None:
+    """Rewrite every `FilePath` in the exported fixes to its real source path.
+
+    A header included through a module's isolation symlink is recorded under that
+    symlink's path; collapsing all paths to the same real file lets
+    clang-apply-replacements recognise the per-translation-unit duplicates and
+    apply each fix once.
+    """
+    for yaml in fixes_dir.glob("*.yaml"):
+        lines = []
+        for line in yaml.read_text().splitlines():
+            if m := FILEPATH_RE.match(line):
+                path = m.group(2).replace("''", "'")
+                real = os.path.realpath(path).replace("'", "''")
+                line = f"{m.group(1)}'{real}'"
+            lines.append(line)
+        yaml.write_text("\n".join(lines) + "\n")
 
 
 def main():
@@ -175,15 +98,25 @@ def main():
             text=True,
         ).strip()
     )
+
     files = staged_files(repo_root)
     if not files:
         return 0
 
-    run_clang_tidy = find_run_clang_tidy()
-    if not run_clang_tidy:
+    run_clang_tidy = find_tool("run-clang-tidy")
+    clang_apply_replacements = find_tool("clang-apply-replacements")
+    missing = [
+        name
+        for name, path in (
+            ("run-clang-tidy", run_clang_tidy),
+            ("clang-apply-replacements", clang_apply_replacements),
+        )
+        if not path
+    ]
+    if missing:
         print(
-            "clang-tidy check failed: TIDY is enabled but neither "
-            "'run-clang-tidy-21' nor 'run-clang-tidy' was found in PATH.",
+            f"clang-tidy check failed: TIDY is enabled but {' and '.join(missing)} "
+            f"was not found in PATH (tried the '-{CLANG_TIDY_VERSION}' suffix too).",
             file=sys.stderr,
         )
         return 1
@@ -197,15 +130,27 @@ def main():
         )
         return 1
 
-    tidy_files = resolve_files(files, build_dir, repo_root)
-    if not tidy_files:
-        return 0
+    with tempfile.TemporaryDirectory() as fixes_dir:
+        result = subprocess.run(
+            [
+                run_clang_tidy,
+                "-quiet",
+                "-p",
+                build_dir,
+                "-export-fixes",
+                fixes_dir,
+                "-allow-no-checks",
+            ]
+            + files
+        )
+        canonicalize_fix_paths(Path(fixes_dir))
+        # `FormatStyle` in .clang-tidy does not reach this path,
+        # so ask for the repository style here.
+        applied = subprocess.run(
+            [clang_apply_replacements, "--format", "--style=file", fixes_dir]
+        )
 
-    result = subprocess.run(
-        [run_clang_tidy, "-quiet", "-p", str(build_dir), "-fix", "-allow-no-checks"]
-        + tidy_files
-    )
-    return result.returncode
+    return result.returncode or applied.returncode
 
 
 if __name__ == "__main__":

bin/pre-commit/fix_pragma_once.py

@@ -0,0 +1,34 @@
+#!/usr/bin/env python3
+
+"""
+Adds "#pragma once" to the top of header files that don't already have it.
+
+Usage: ./bin/pre-commit/fix_pragma_once.py <file1> <file2> ...
+"""
+
+import sys
+from pathlib import Path
+
+PRAGMA_ONCE = "#pragma once\n\n"
+
+
+def fix_pragma_once(path: Path) -> bool:
+    original = path.read_text(encoding="utf-8")
+    if PRAGMA_ONCE not in original:
+        path.write_text(PRAGMA_ONCE + original, encoding="utf-8")
+        return False
+    return True
+
+
+def main() -> int:
+    files = [Path(f) for f in sys.argv[1:]]
+    success = True
+
+    for path in files:
+        success &= fix_pragma_once(path)
+
+    return 0 if success else 1
+
+
+if __name__ == "__main__":
+    sys.exit(main())

bin/pre-commit/test_check_doxygen_style.py

@@ -0,0 +1,406 @@
+#!/usr/bin/env python3
+"""
+Tests for check_doxygen_style.py.
+
+Run directly (no test framework needed):
+    ./bin/pre-commit/test_check_doxygen_style.py
+or under pytest:
+    pytest bin/pre-commit/test_check_doxygen_style.py
+"""
+
+import sys
+import textwrap
+
+from check_doxygen_style import Finding, check_source
+
+
+def findings_for(text: str) -> list[Finding]:
+    """Return the style violations for the given source text.
+
+    The text is dedented and its leading newline stripped, so fixtures can be
+    written as indented triple-quoted here-docs while keeping honest 1-based
+    line numbers.
+    """
+    text = textwrap.dedent(text).lstrip("\n")
+    return check_source(text)
+
+
+def labels_for(text: str) -> list[str]:
+    return [f.category.label for f in findings_for(text)]
+
+
+def messages_for(text: str) -> list[str]:
+    return [f.message for f in findings_for(text)]
+
+
+# --- well-formed input produces nothing -------------------------------------
+
+
+def test_clean_block_ok() -> None:
+    code = """
+    /**
+     * Brief.
+     *
+     * @tparam T a type
+     * @param x the x
+     * @return the result
+     */
+    """
+    assert findings_for(code) == []
+
+
+def test_blank_lines_inside_block_ok() -> None:
+    code = """
+    /**
+     * a
+     *
+     * b
+     */
+    """
+    assert findings_for(code) == []
+
+
+def test_member_and_divider_allowed() -> None:
+    assert findings_for("int x;  ///< ok member\n") == []
+    assert findings_for("//////////\n") == []
+    assert findings_for("//// text\n") == []
+
+
+# --- line-comment forms ------------------------------------------------------
+
+
+def test_triple_slash() -> None:
+    code = "/// doc\n"
+    assert labels_for(code) == ["triple-slash"]
+
+
+def test_qt_line() -> None:
+    code = "//! doc\n"
+    assert labels_for(code) == ["qt-line"]
+
+
+def test_qt_member() -> None:
+    code = "int x;  //!< doc\n"
+    assert labels_for(code) == ["qt-member"]
+
+
+def test_block_member() -> None:
+    code = "int x;  /**< doc */\n"
+    assert labels_for(code) == ["block-member"]
+
+
+def test_qt_block_member() -> None:
+    code = "int x;  /*!< doc */\n"
+    assert labels_for(code) == ["qt-block-member"]
+
+
+def test_doc_in_line_comment() -> None:
+    code = "// @param x\n"
+    assert labels_for(code) == ["doc-in-line-comment"]
+
+
+# --- block forms -------------------------------------------------------------
+
+
+def test_qt_comment() -> None:
+    code = """
+    /*!
+     * brief
+     */
+    """
+    assert labels_for(code) == ["qt-comment"]
+
+
+def test_qt_comment_single_line() -> None:
+    # /*! ... */ on one line -> qt-comment (plus single-line-block)
+    code = "/*! brief */\n"
+    assert labels_for(code) == ["qt-comment", "single-line-block"]
+
+
+def test_single_line_block() -> None:
+    code = "/** brief */\n"
+    assert labels_for(code) == ["single-line-block"]
+
+
+def test_single_line_markers_allowed() -> None:
+    for marker in ("@{", "@}", "@cond LABEL", "@endcond", "@file foo.h"):
+        code = f"/** {marker} */\n"
+        assert findings_for(code) == [], marker
+
+
+def test_text_on_opener() -> None:
+    code = """
+    /** text here
+     * more
+     */
+    """
+    assert labels_for(code) == ["text-on-opener"]
+
+
+def test_bare_continuation() -> None:
+    code = """
+    /**
+     * a
+       bare line
+     */
+    """
+    assert labels_for(code) == ["bare-continuation"]
+
+
+def test_over_indented_first_line() -> None:
+    code = """
+    /**
+     *   over
+     */
+    """
+    assert labels_for(code) == ["over-indented"]
+
+
+def test_over_indented_tag() -> None:
+    # a flush first line consumes "first content", isolating the tag check
+    code = """
+    /**
+     * brief
+     *   @param x
+     */
+    """
+    assert labels_for(code) == ["over-indented-tag"]
+
+
+def test_combined_marker() -> None:
+    code = """
+    /**
+     * @{
+     */
+    """
+    assert labels_for(code) == ["combined-marker"]
+
+
+def test_prose_label() -> None:
+    for word in ("Returns", "Throws", "Exceptions"):
+        code = f"""
+        /**
+         * {word}:
+         */
+        """
+        assert labels_for(code) == ["prose-label"], word
+
+
+def test_content_on_closer() -> None:
+    code = """
+    /**
+     * a
+     * b */
+    """
+    assert labels_for(code) == ["content-on-closer"]
+
+
+def test_plain_block_doc() -> None:
+    assert labels_for("/* @param x */\n") == ["plain-block-doc"]
+    assert findings_for("/* just an ordinary note */\n") == []
+
+
+def test_tag_order() -> None:
+    out_of_order = """
+    /**
+     * @param x
+     * @tparam T
+     */
+    """
+    assert labels_for(out_of_order) == ["tag-order"]
+
+    correct = """
+    /**
+     * @tparam T
+     * @param x
+     * @return r
+     */
+    """
+    assert findings_for(correct) == []
+
+    single = """
+    /**
+     * @param x
+     */
+    """
+    assert findings_for(single) == []  # single tag: never out of order
+
+
+# --- command spelling (must work on body/closer lines, not just the opener) --
+
+
+def test_backslash_command_on_body_line() -> None:
+    code = r"""
+    /**
+     * \brief x
+     */
+    """
+    assert labels_for(code) == ["backslash-command"]
+
+
+def test_backslash_command_suggests_canonical_spelling() -> None:
+    # a backslash + non-canonical spelling is fixed in one pass, not two:
+    # \sa -> @see (not @sa), \returns -> @return (not @returns)
+    sa = r"""
+    /**
+     * \sa other
+     */
+    """
+    assert messages_for(sa) == [r"use @see instead of \sa"]
+
+    returns = r"""
+    /**
+     * \returns x
+     */
+    """
+    assert messages_for(returns) == [r"use @return instead of \returns"]
+
+
+def test_wrong_command_on_body_line() -> None:
+    code = """
+    /**
+     * @returns x
+     */
+    """
+    assert labels_for(code) == ["wrong-command"]
+
+
+def test_body_line_commands_regression() -> None:
+    # regression: these live on body lines of a multi-line block
+    code = r"""
+    /**
+     * @returns bad
+     * @throw ex
+     * @sa other
+     * \param y
+     */
+    """
+    assert labels_for(code) == [
+        "wrong-command",
+        "wrong-command",
+        "wrong-command",
+        "backslash-command",
+    ]
+
+
+def test_command_on_closer_line() -> None:
+    code = """
+    /**
+     * a
+     * @sa b */
+    """
+    assert labels_for(code) == ["wrong-command", "content-on-closer"]
+
+
+def test_no_double_count_across_opener_body_closer() -> None:
+    code = """
+    /** @returns opener
+     * @throw body
+     * @sa closer */
+    """
+    assert labels_for(code).count("wrong-command") == 3
+
+
+def test_code_with_word_allowed() -> None:
+    # @code{.cpp} is valid Doxygen and must not be flagged
+    code = """
+    /**
+     * @code{.cpp}
+     * int x;
+     * @endcode
+     */
+    """
+    assert findings_for(code) == []
+
+
+# --- rendered message text ---------------------------------------------------
+
+
+def test_message_uses_category_description() -> None:
+    # a static category renders its default description
+    code = "/// doc\n"
+    assert messages_for(code) == ["use a /** ... */ block instead of ///"]
+
+
+def test_message_detail_overrides() -> None:
+    # dynamic categories render the offending text via Finding.detail
+    backslash = r"""
+    /**
+     * \param y
+     */
+    """
+    assert messages_for(backslash) == [r"use @param instead of \param"]
+
+    wrong = """
+    /**
+     * @returns x
+     */
+    """
+    assert messages_for(wrong) == ["use @return instead of @returns"]
+
+    prose = """
+    /**
+     * Throws:
+     */
+    """
+    assert messages_for(prose) == ['use @throws instead of prose "Throws:"']
+
+
+# --- robustness --------------------------------------------------------------
+
+
+def test_empty_file_no_crash() -> None:
+    assert findings_for("") == []
+
+
+def test_mid_line_plain_block_skipped() -> None:
+    # a /* opened mid-line (after code) and spanning lines is skipped, so its
+    # comment-like contents are not analyzed
+    code = """
+    int x = 0;  /* note: @returns is not a real tag here
+     * @param also not real
+     */
+    int y = 0;
+    """
+    assert findings_for(code) == []
+
+
+def test_unclosed_block_scanned_to_eof() -> None:
+    # an unterminated /** block is still scanned to EOF (no crash, body checked)
+    code = """
+    /**
+     * @returns x
+    """
+    assert labels_for(code) == ["wrong-command"]
+
+
+def test_banner_and_empty_comment_not_flagged() -> None:
+    code = """
+    /***
+     * banner
+     ***/
+    """
+    assert findings_for(code) == []
+    assert findings_for("/**/\n") == []
+
+
+def main() -> int:
+    tests = sorted(
+        (name, fn)
+        for name, fn in globals().items()
+        if name.startswith("test_") and callable(fn)
+    )
+    failed = 0
+    for name, fn in tests:
+        try:
+            fn()
+            print(f"PASS {name}")
+        except AssertionError as exc:
+            failed += 1
+            print(f"FAIL {name}: {exc!r}")
+    print(f"\n{len(tests) - failed}/{len(tests)} passed")
+    return 1 if failed else 0
+
+
+if __name__ == "__main__":
+    sys.exit(main())

cfg/xrpld-example.cfg

@@ -488,6 +488,17 @@
 #   Must be a number between 100 and 1000, defaults to 250
 #
 #
+# [max_subscriptions_per_connection]
+#
+#   Maximum number of account, real-time account, and account-history
+#   subscriptions a single client connection may hold at once. Bounds the
+#   per-connection state torn down when the connection disconnects. Book
+#   subscriptions are tracked separately and are not counted here.
+#
+#   Defaults to 100000 if not set; large enough for legitimate power users
+#   such as block explorers.
+#
+#
 # [overlay]
 #
 #   Controls settings related to the peer to peer overlay.
@@ -538,6 +549,45 @@
 #       only be used for local testing and debugging. Do not disable
 #       on mainnet.
 #
+#   max_untrusted_count = <number>
+#
+#       The number of manifests the server keeps for validators it does not
+#       list, and the number it sends and processes in a single peer protocol
+#       message. Once the server holds this many, a manifest for a new
+#       unlisted validator is rejected, so peer gossip cannot grow the cache
+#       without end.
+#
+#       This option can take any value between 50 and 1000, inclusive. If
+#       the option is not present the server uses its built-in value.
+#
+#       The current default (which is subject to change) is 300.
+#
+#   max_trusted_count = <number>
+#
+#       The number of manifests for listed validators to allow for when
+#       sizing peer protocol messages. Manifests for listed validators are
+#       never dropped, whether sending or receiving, because doing so would
+#       delay a validator key change reaching this server. Set this above the
+#       number of validators the server lists.
+#
+#       Together the two counts above set the largest manifest message the
+#       server accepts: bigger messages are discarded without reading them,
+#       and without penalising the sender. Raising either means the server
+#       accepts and sends bigger messages than a peer using the defaults, and
+#       those peers will discard what this server sends. Lowering either below
+#       what peers send makes this server discard their manifest messages,
+#       which it does without recording anything.
+#
+#       This option can take any value between 50 and 1000, inclusive. If
+#       the option is not present the server uses its built-in value.
+#
+#       The current default (which is subject to change) is 300.
+#
+#       NOTE: These two options (max_untrusted_count and max_trusted_count)
+#       are transitional. They exist to bound manifest-message size and cache
+#       growth during the network upgrade. They may be removed in a future
+#       release once the fleet has upgraded, and should not be relied upon as
+#       stable configuration.
 #
 # [transaction_queue] EXPERIMENTAL
 #

cmake/CompilationEnv.cmake

@@ -29,6 +29,27 @@ if(CMAKE_GENERATOR STREQUAL "Xcode")
     set(is_xcode TRUE)
 endif()
 
+# --------------------------------------------------------------------
+# Nix toolchain detection
+# --------------------------------------------------------------------
+# True when the C++ compiler resolves into the Nix store. CMAKE_CXX_COMPILER may
+# be referenced through a symlink outside the store (a Nix profile, a /usr/bin
+# alternative, ...), so resolve the real path before matching.
+set(is_nix_compiler FALSE)
+get_filename_component(_cxx_real "${CMAKE_CXX_COMPILER}" REALPATH)
+if(_cxx_real MATCHES "^/nix/store/")
+    set(is_nix_compiler TRUE)
+endif()
+unset(_cxx_real)
+
+# True inside the Nix CI Docker image, identified by the /nix/ci-env tree it
+# ships (see nix/docker/Dockerfile). The dev shell and bare systems don't have
+# it, so it distinguishes the CI image from other Nix-compiler environments.
+set(is_ci_image FALSE)
+if(EXISTS "/nix/ci-env/bin")
+    set(is_ci_image TRUE)
+endif()
+
 # --------------------------------------------------------------------
 # Operating system detection
 # --------------------------------------------------------------------
@@ -56,3 +77,16 @@ elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "aarch64|arm64|ARM64")
 else()
     message(FATAL_ERROR "Unknown architecture: ${CMAKE_SYSTEM_PROCESSOR}")
 endif()
+
+# --------------------------------------------------------------------
+# Sanitizers
+# --------------------------------------------------------------------
+# SANITIZERS is injected by the Conan toolchain when a sanitizer build is
+# requested (see conan/profiles/sanitizers). The flags are applied to the
+# 'common' target in XrplSanitizers; this flag lets other modules know a
+# sanitizer build is active without depending on that module.
+if(DEFINED SANITIZERS)
+    set(SANITIZERS_ENABLED TRUE)
+else()
+    set(SANITIZERS_ENABLED FALSE)
+endif()

cmake/PatchNixBinary.cmake

@@ -0,0 +1,90 @@
+#[===================================================================[
+   Patch executables to run in non-Nix environments.
+
+   The Nix toolchain links binaries against an ELF interpreter (loader)
+   that lives in the Nix store, so the resulting binaries don't run elsewhere
+   (including once installed from the .deb package). `patch_nix_binary` resets
+   the interpreter to the system default loader and drops the rpath, once the
+   binary has been linked.
+
+   This runs by default for Nix-toolchain builds (determined by whether the compiler resolves under /nix/store/).
+   Those builds are where binaries get a Nix-store loader.
+   It is opted out of by setting the XRPLD_NO_PATCH_NIX_BINARY environment variable —
+   the plain Nix dev shells set it, since their binaries link a newer glibc
+   and must not be retargeted to the system loader.
+
+   Non-Nix builds (a system compiler, already using the system loader) and sanitizer builds
+   (runtime libraries resolved through the rpath) are skipped too.
+   Everywhere else `patch_nix_binary` is a no-op.
+
+   The default loader is resolved by bin/default-loader-path.sh.
+#]===================================================================]
+
+include_guard(GLOBAL)
+
+include(CompilationEnv)
+
+# Resolves the system default ELF loader path for the current architecture.
+set(_loader_path_script "${CMAKE_SOURCE_DIR}/bin/default-loader-path.sh")
+
+if(
+    is_linux
+    AND NOT SANITIZERS_ENABLED
+    AND is_nix_compiler
+    AND NOT DEFINED ENV{XRPLD_NO_PATCH_NIX_BINARY}
+)
+    execute_process(
+        COMMAND "${_loader_path_script}"
+        OUTPUT_VARIABLE DEFAULT_LOADER_PATH
+        OUTPUT_STRIP_TRAILING_WHITESPACE
+        COMMAND_ERROR_IS_FATAL ANY
+    )
+    find_program(PATCHELF_COMMAND patchelf REQUIRED)
+    set(PATCH_NIX_BINARIES TRUE)
+    message(
+        STATUS
+        "Binaries will be patched to use loader '${DEFAULT_LOADER_PATH}'"
+    )
+else()
+    set(PATCH_NIX_BINARIES FALSE)
+endif()
+
+function(patch_nix_binary target)
+    if(NOT PATCH_NIX_BINARIES)
+        return()
+    endif()
+
+    set(patch_command
+        "${PATCHELF_COMMAND}"
+        --set-interpreter
+        "${DEFAULT_LOADER_PATH}"
+        --remove-rpath
+        "$<TARGET_FILE:${target}>"
+    )
+    set(comment "Patching ${target}: set default loader, remove rpath")
+
+    # POST_BUILD is the cheap way to do this: it runs only when the binary is
+    # relinked. It is also only available in the directory that defined the
+    # target, so for a target from elsewhere (e.g. a FetchContent subproject)
+    # fall back to a custom target that runs after the binary is linked. That
+    # one runs on every build, which is harmless because patchelf is idempotent.
+    get_target_property(target_source_dir ${target} SOURCE_DIR)
+    if("${target_source_dir}" STREQUAL "${CMAKE_CURRENT_SOURCE_DIR}")
+        add_custom_command(
+            TARGET ${target}
+            POST_BUILD
+            COMMAND ${patch_command}
+            COMMENT "${comment}"
+            VERBATIM
+        )
+    else()
+        add_custom_target(
+            ${target}-patch-nix
+            ALL
+            COMMAND ${patch_command}
+            COMMENT "${comment}"
+            VERBATIM
+        )
+        add_dependencies(${target}-patch-nix ${target})
+    endif()
+endfunction()

cmake/XrplAddBenchmark.cmake

@@ -0,0 +1,38 @@
+include_guard()
+
+include(isolate_headers)
+
+# Define a benchmark executable for the module `name`.
+#
+# This follows the same general pattern as other build helpers in this repo
+# (e.g. `add_module`): create a target and isolate headers, but here the target
+# is a benchmark executable and no `add_test(...)` is registered.
+#
+# `isolate_headers` exposes only `${CMAKE_CURRENT_SOURCE_DIR}/${name}` on the
+# include path, rooted at `src`, so a benchmark's own headers are reached as
+# `<benchmarks/.../${name}/...>` and nothing else in the tree leaks in.
+function(xrpl_add_benchmark name)
+    set(target ${PROJECT_NAME}.bench.${name})
+
+    file(
+        GLOB_RECURSE sources
+        CONFIGURE_DEPENDS
+        "${CMAKE_CURRENT_SOURCE_DIR}/${name}/*.cpp"
+        "${CMAKE_CURRENT_SOURCE_DIR}/${name}.cpp"
+    )
+    add_executable(${target} ${ARGN} ${sources})
+
+    # Benchmark sources register cases through Google Benchmark's static
+    # registrars (anonymous-namespace lambdas). Merging several such files into
+    # one unity translation unit collides those internal-linkage entities, so
+    # keep benchmarks out of the unity build - mirroring xrpl.libpb in
+    # XrplCore.cmake. Each file compiles fine on its own.
+    set_target_properties(${target} PROPERTIES UNITY_BUILD OFF)
+
+    isolate_headers(
+        ${target}
+        "${CMAKE_SOURCE_DIR}/src"
+        "${CMAKE_CURRENT_SOURCE_DIR}/${name}"
+        PRIVATE
+    )
+endfunction()

cmake/XrplAddTest.cmake

@@ -1,22 +0,0 @@
-include(isolate_headers)
-
-function(xrpl_add_test name)
-    set(target ${PROJECT_NAME}.test.${name})
-
-    file(
-        GLOB_RECURSE sources
-        CONFIGURE_DEPENDS
-        "${CMAKE_CURRENT_SOURCE_DIR}/${name}/*.cpp"
-        "${CMAKE_CURRENT_SOURCE_DIR}/${name}.cpp"
-    )
-    add_executable(${target} ${ARGN} ${sources})
-
-    isolate_headers(
-        ${target}
-        "${CMAKE_SOURCE_DIR}"
-        "${CMAKE_SOURCE_DIR}/tests/${name}"
-        PRIVATE
-    )
-
-    add_test(NAME ${target} COMMAND ${target})
-endfunction()

cmake/XrplCompiler.cmake

@@ -145,13 +145,47 @@ else()
         INTERFACE
             -rdynamic
             $<$<BOOL:${is_linux}>:-Wl,-z,relro,-z,now,--build-id>
-            # link to static libc/c++ iff: * static option set and * NOT APPLE (AppleClang does not support static
-            # libc/c++) and * NOT SANITIZERS (sanitizers typically don't work with static libc/c++)
-            $<$<AND:$<BOOL:${static}>,$<NOT:$<BOOL:${APPLE}>>,$<NOT:$<BOOL:${SANITIZERS_ENABLED}>>>:
+            # link to static libc/c++ if:
+            # * static option set and
+            # * NOT APPLE (AppleClang does not support static libc/c++)
+            $<$<AND:$<BOOL:${static}>,$<NOT:$<BOOL:${APPLE}>>>:
             -static-libstdc++
             -static-libgcc
             >
     )
+
+    # On aarch64, libatomic is required for atomic operations. It is not needed on x86_64.
+    # Linking it statically on Linux
+    if(is_arm64 AND is_linux)
+        target_link_options(
+            common
+            INTERFACE -Wl,--push-state -Wl,-Bstatic -latomic -Wl,--pop-state
+        )
+    endif()
+
+    # Keep -stdlib=libstdc++ off the compile commands, but preserve it for linking.
+    #
+    # Conan turns `compiler.libcxx=libstdc++` into `-stdlib=libstdc++` and puts it in
+    # CMAKE_CXX_FLAGS, which CMake passes to BOTH compile and link steps. On a normal Clang
+    # the compile step consumes it while choosing the C++ stdlib include paths. The Nixpkgs
+    # Clang wrapper supplies those paths itself (via -nostdinc++), so at compile time the
+    # flag is unused -> Clang errors under our -Werror. At link time the flag IS consumed
+    # (it selects the C++ runtime), so we move it there instead of dropping it entirely.
+    if(
+        is_nix_compiler
+        AND is_linux
+        AND is_clang
+        AND CMAKE_CXX_FLAGS MATCHES "stdlib=libstdc"
+    )
+        string(
+            REPLACE "-stdlib=libstdc++"
+            ""
+            CMAKE_CXX_FLAGS
+            "${CMAKE_CXX_FLAGS}"
+        )
+        string(STRIP "${CMAKE_CXX_FLAGS}" CMAKE_CXX_FLAGS)
+        add_link_options($<$<LINK_LANGUAGE:CXX>:-stdlib=libstdc++>)
+    endif()
 endif()
 
 # Antithesis instrumentation will only be built and deployed using machines running Linux.
@@ -232,10 +266,50 @@ elseif(use_lld)
     )
     if("${LD_VERSION}" MATCHES "LLD")
         target_link_libraries(common INTERFACE -fuse-ld=lld)
+        # remembered for the linker flag probe below
+        set(fuse_ld_flag "-fuse-ld=lld")
     endif()
     unset(LD_VERSION)
 endif()
 
+# Linker warnings are errors where we control the toolchain and the dependencies: CI and the Nix dev shell.
+# On non-Nix macOS we suppress the deployment target warning: an old Conan profile may not pin os.version.
+# Only the new Apple linker understands the flag, so probe the actual linker (lld may be selected above).
+if(is_macos OR is_linux)
+    if(is_ci OR is_nix_compiler)
+        if(is_macos)
+            set(fatal_warnings_flag "-Wl,-fatal_warnings")
+        else()
+            set(fatal_warnings_flag "-Wl,--fatal-warnings")
+        endif()
+        message(
+            STATUS
+            "Treating all linker warnings as errors (${fatal_warnings_flag})"
+        )
+        target_link_options(common INTERFACE "${fatal_warnings_flag}")
+        unset(fatal_warnings_flag)
+    elseif(is_macos)
+        set(silence_flag "-Wl,-deployment_target_mismatches,suppress")
+        set(probe_flags ${fuse_ld_flag} "${silence_flag}")
+        include(CheckLinkerFlag)
+        check_linker_flag(
+            CXX
+            "${probe_flags}"
+            have_deployment_target_mismatches
+        )
+        if(have_deployment_target_mismatches)
+            message(
+                STATUS
+                "Silencing macOS deployment target mismatch warnings (${silence_flag})"
+            )
+            target_link_options(common INTERFACE "${silence_flag}")
+        endif()
+        unset(probe_flags)
+        unset(silence_flag)
+    endif()
+endif()
+unset(fuse_ld_flag)
+
 if(assert)
     foreach(var_ CMAKE_C_FLAGS_RELEASE CMAKE_CXX_FLAGS_RELEASE)
         string(REGEX REPLACE "[-/]DNDEBUG" "" ${var_} "${${var_}}")

cmake/XrplCore.cmake

@@ -94,6 +94,9 @@ add_module(xrpl basics)
 target_link_libraries(xrpl.libxrpl.basics PUBLIC xrpl.libxrpl.beast)
 
 # Level 03
+add_module(xrpl config)
+target_link_libraries(xrpl.libxrpl.config PUBLIC xrpl.libxrpl.basics)
+
 add_module(xrpl json)
 target_link_libraries(xrpl.libxrpl.json PUBLIC xrpl.libxrpl.basics)
 
@@ -120,6 +123,7 @@ target_link_libraries(
     xrpl.libxrpl.core
     PUBLIC
         xrpl.libxrpl.basics
+        xrpl.libxrpl.config
         xrpl.libxrpl.json
         xrpl.libxrpl.protocol
         xrpl.libxrpl.protocol_autogen
@@ -129,6 +133,12 @@ target_link_libraries(
 add_module(xrpl resource)
 target_link_libraries(xrpl.libxrpl.resource PUBLIC xrpl.libxrpl.protocol)
 
+add_module(xrpl peerfinder)
+target_link_libraries(
+    xrpl.libxrpl.peerfinder
+    PUBLIC xrpl.libxrpl.basics xrpl.libxrpl.protocol
+)
+
 # Level 08
 add_module(xrpl net)
 target_link_libraries(
@@ -143,7 +153,11 @@ target_link_libraries(
 add_module(xrpl nodestore)
 target_link_libraries(
     xrpl.libxrpl.nodestore
-    PUBLIC xrpl.libxrpl.basics xrpl.libxrpl.json xrpl.libxrpl.protocol
+    PUBLIC
+        xrpl.libxrpl.basics
+        xrpl.libxrpl.config
+        xrpl.libxrpl.json
+        xrpl.libxrpl.protocol
 )
 
 add_module(xrpl shamap)
@@ -159,13 +173,14 @@ target_link_libraries(
 add_module(xrpl rdb)
 target_link_libraries(
     xrpl.libxrpl.rdb
-    PUBLIC xrpl.libxrpl.basics xrpl.libxrpl.core
+    PUBLIC xrpl.libxrpl.basics xrpl.libxrpl.config xrpl.libxrpl.core
 )
 
 add_module(xrpl server)
 target_link_libraries(
     xrpl.libxrpl.server
     PUBLIC
+        xrpl.libxrpl.config
         xrpl.libxrpl.protocol
         xrpl.libxrpl.core
         xrpl.libxrpl.rdb
@@ -192,6 +207,16 @@ target_link_libraries(
 add_module(xrpl tx)
 target_link_libraries(xrpl.libxrpl.tx PUBLIC xrpl.libxrpl.ledger)
 
+add_module(xrpl consensus)
+target_link_libraries(
+    xrpl.libxrpl.consensus
+    PUBLIC
+        xrpl.libxrpl.basics
+        xrpl.libxrpl.json
+        xrpl.libxrpl.protocol
+        xrpl.libxrpl.ledger
+)
+
 add_library(xrpl.libxrpl)
 set_target_properties(xrpl.libxrpl PROPERTIES OUTPUT_NAME xrpl)
 
@@ -210,6 +235,8 @@ target_link_modules(
     basics
     beast
     conditions
+    config
+    consensus
     core
     crypto
     git
@@ -217,6 +244,7 @@ target_link_modules(
     ledger
     net
     nodestore
+    peerfinder
     protocol
     protocol_autogen
     rdb
@@ -237,6 +265,7 @@ target_link_modules(
 
 if(xrpld)
     add_executable(xrpld)
+    patch_nix_binary(xrpld)
     if(tests)
         target_compile_definitions(xrpld PUBLIC ENABLE_TESTS)
         target_compile_definitions(
@@ -282,4 +311,13 @@ if(xrpld)
             PRIVATE ${CMAKE_SOURCE_DIR}/external/antithesis-sdk
         )
     endif()
+
+    # The xrpld headers are not built with add_module, so verify them against
+    # the executable's own compile environment.
+    if(verify_headers)
+        verify_target_headers(xrpld "${CMAKE_CURRENT_SOURCE_DIR}/src/xrpld")
+        if(tests)
+            verify_target_headers(xrpld "${CMAKE_CURRENT_SOURCE_DIR}/src/test")
+        endif()
+    endif()
 endif()

cmake/XrplCov.cmake

@@ -44,10 +44,11 @@ setup_target_for_coverage_gcovr(
     EXCLUDE
         "src/test"
         "src/tests"
+        "src/benchmarks"
         "include/xrpl/beast/test"
         "include/xrpl/beast/unit_test"
         "${CMAKE_BINARY_DIR}/pb-xrpl.libpb"
-    DEPENDENCIES xrpld xrpl.tests
+    DEPENDENCIES xrpld xrpl_tests
 )
 
 add_code_coverage_to_target(opts INTERFACE)

cmake/XrplPackaging.cmake

@@ -25,10 +25,22 @@ if(NOT (RPMBUILD_EXECUTABLE OR DPKG_BUILDPACKAGE_EXECUTABLE))
     return()
 endif()
 
+if(NOT TARGET xrpld)
+    message(STATUS "xrpld=ON is required; 'package' target not available")
+    return()
+endif()
+
+if(NOT TARGET validator-keys)
+    message(
+        STATUS
+        "validator_keys=ON is required; 'package' target not available"
+    )
+    return()
+endif()
+
 set(package_env
     SRC_DIR=${CMAKE_SOURCE_DIR}
     BUILD_DIR=${CMAKE_BINARY_DIR}
-    PKG_VERSION=${xrpld_version}
     PKG_RELEASE=${pkg_release}
 )
 
@@ -38,7 +50,7 @@ add_custom_target(
         ${CMAKE_COMMAND} -E env ${package_env}
         ${CMAKE_SOURCE_DIR}/package/build_pkg.sh
     WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
-    DEPENDS xrpld
+    DEPENDS xrpld validator-keys
     COMMENT "Building Linux package (deb/rpm inferred from host tooling)"
     VERBATIM
 )

cmake/XrplProtocolAutogen.cmake

@@ -2,21 +2,22 @@
    Protocol Autogen - Code generation for protocol wrapper classes
 #]===================================================================]
 
+# The repository root, derived from the location of this file rather than from
+# the including project, so that the targets below can also be offered on their
+# own by cmake/codegen/CMakeLists.txt.
+get_filename_component(XRPL_ROOT "${CMAKE_CURRENT_LIST_DIR}/.." ABSOLUTE)
+
 set(CODEGEN_VENV_DIR
-    "${CMAKE_CURRENT_SOURCE_DIR}/.venv"
+    "${XRPL_ROOT}/.venv"
     CACHE PATH
     "Path to a Python virtual environment for code generation. A venv will be created here by setup_code_gen and used to run generation scripts."
 )
 
 # Directory paths
-set(MACRO_DIR "${CMAKE_CURRENT_SOURCE_DIR}/include/xrpl/protocol/detail")
-set(AUTOGEN_HEADER_DIR
-    "${CMAKE_CURRENT_SOURCE_DIR}/include/xrpl/protocol_autogen"
-)
-set(AUTOGEN_TEST_DIR
-    "${CMAKE_CURRENT_SOURCE_DIR}/src/tests/libxrpl/protocol_autogen"
-)
-set(SCRIPTS_DIR "${CMAKE_CURRENT_SOURCE_DIR}/cmake/scripts/codegen")
+set(MACRO_DIR "${XRPL_ROOT}/include/xrpl/protocol/detail")
+set(AUTOGEN_HEADER_DIR "${XRPL_ROOT}/include/xrpl/protocol_autogen")
+set(AUTOGEN_TEST_DIR "${XRPL_ROOT}/src/tests/libxrpl/protocol_autogen")
+set(SCRIPTS_DIR "${XRPL_ROOT}/cmake/scripts/codegen")
 
 # Input macro files
 set(TRANSACTIONS_MACRO "${MACRO_DIR}/transactions.macro")
@@ -114,14 +115,14 @@ if(CODEGEN_VENV_DIR)
         setup_code_gen
         COMMAND ${Python3_EXECUTABLE} -m venv "${CODEGEN_VENV_DIR}"
         COMMAND ${CODEGEN_PYTHON} -m pip install -r "${REQUIREMENTS_FILE}"
-        WORKING_DIRECTORY "${CMAKE_CURRENT_SOURCE_DIR}"
+        WORKING_DIRECTORY "${XRPL_ROOT}"
         COMMENT "Creating venv and installing code generation dependencies..."
     )
 else()
     add_custom_target(
         setup_code_gen
         COMMAND ${Python3_EXECUTABLE} -m pip install -r "${REQUIREMENTS_FILE}"
-        WORKING_DIRECTORY "${CMAKE_CURRENT_SOURCE_DIR}"
+        WORKING_DIRECTORY "${XRPL_ROOT}"
         COMMENT "Installing code generation dependencies..."
     )
 endif()
@@ -139,8 +140,8 @@ add_custom_target(
         -DSFIELDS_MACRO=${SFIELDS_MACRO}
         -DAUTOGEN_HEADER_DIR=${AUTOGEN_HEADER_DIR}
         -DAUTOGEN_TEST_DIR=${AUTOGEN_TEST_DIR} -P
-        "${CMAKE_CURRENT_SOURCE_DIR}/cmake/XrplProtocolAutogenRun.cmake"
-    WORKING_DIRECTORY "${CMAKE_CURRENT_SOURCE_DIR}"
+        "${CMAKE_CURRENT_LIST_DIR}/XrplProtocolAutogenRun.cmake"
+    WORKING_DIRECTORY "${XRPL_ROOT}"
     COMMENT "Running protocol code generation..."
     SOURCES ${ALL_INPUT_FILES}
 )

cmake/XrplSanitizers.cmake

@@ -14,11 +14,9 @@
 include_guard(GLOBAL)
 include(CompilationEnv)
 
-if(NOT DEFINED SANITIZERS)
-    set(SANITIZERS_ENABLED FALSE)
+if(NOT SANITIZERS_ENABLED)
     return()
 endif()
-set(SANITIZERS_ENABLED TRUE)
 
 message(STATUS "=== Configuring Sanitizers ===")
 message(STATUS "  SANITIZERS: ${SANITIZERS}")

cmake/XrplSanity.cmake

@@ -36,6 +36,19 @@ elseif(is_gcc)
     endif()
 endif()
 
+# A Nix compiler is only meant to be used from a managed environment: the xrpld
+# dev shell (which exports XRPL_DEVSHELL) or the CI image. Using one from a bare
+# shell usually means a leaked toolchain (picked up via PATH or a Conan profile)
+# and leads to confusing breakage, so fail early with guidance.
+if(is_nix_compiler AND NOT is_ci_image AND NOT DEFINED ENV{XRPL_DEVSHELL})
+    message(
+        FATAL_ERROR
+        "A Nix compiler (${CMAKE_CXX_COMPILER}) is being used outside the xrpld "
+        "dev shell. Enter it with `nix develop` (see docs/build/nix.md) before "
+        "configuring the build."
+    )
+endif()
+
 # check for in-source build and fail
 if("${CMAKE_CURRENT_SOURCE_DIR}" STREQUAL "${CMAKE_BINARY_DIR}")
     message(

cmake/XrplSettings.cmake

@@ -30,6 +30,25 @@ if(tests)
     endif()
 endif()
 
+option(benchmark "Build benchmarks" ON)
+
+# Enabled by default so every header is compiled on its own as the main file of
+# its own compile_commands.json entry - this is what lets clang-tidy (and clangd
+# and IDEs) analyse a header's own includes directly. The per-header objects are
+# EXCLUDE_FROM_ALL (see cmake/verify_headers.cmake) and the aggregate target
+# below is not part of `all`, so a normal `cmake --build` never compiles them.
+option(
+    verify_headers
+    "Compile every header on its own to verify it is self-contained."
+    ON
+)
+if(verify_headers)
+    # Aggregate target that builds every per-module header-verification library
+    # created by add_module (see cmake/verify_headers.cmake). Build it with:
+    #   cmake --build . --target verify-headers
+    add_custom_target(verify-headers)
+endif()
+
 option(unity "Creates a build using UNITY support in cmake." OFF)
 if(unity)
     if(NOT is_ci)

cmake/XrplValidatorKeys.cmake

@@ -5,22 +5,39 @@ option(
 )
 
 if(validator_keys)
-    git_branch(current_branch)
-    # default to tracking VK master branch unless we are on release
-    if(NOT (current_branch STREQUAL "release"))
-        set(current_branch "master")
-    endif()
-    message(STATUS "Tracking ValidatorKeys branch: ${current_branch}")
+    # Own the install destination below rather than relying on another module
+    # having pulled this in first.
+    include(GNUInstallDirs)
+
+    # Pinned to an exact commit, not a branch: the tool ships inside our
+    # packages, so the same xrpld version must always package the same
+    # validator-keys. Bump this deliberately.
+    set(validator_keys_commit "4c0fb75eec9601c711645998c904507e87e910ae")
+    message(STATUS "Using ValidatorKeys commit: ${validator_keys_commit}")
 
     FetchContent_Declare(
         validator_keys
         GIT_REPOSITORY https://github.com/ripple/validator-keys-tool.git
-        GIT_TAG "${current_branch}"
+        GIT_TAG "${validator_keys_commit}"
     )
     FetchContent_MakeAvailable(validator_keys)
+    # The tool's own CMakeLists excludes the target from 'all' when it is built
+    # as a subproject. Undo that, so validator_keys=ON really does build it.
     set_target_properties(
         validator-keys
-        PROPERTIES RUNTIME_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}"
+        PROPERTIES
+            RUNTIME_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}"
+            EXCLUDE_FROM_ALL OFF
+            EXCLUDE_FROM_DEFAULT_BUILD OFF
+    )
+    # We ship this binary, so like xrpld it must not keep the Nix store's ELF
+    # loader, or it cannot run on the target distro at all.
+    patch_nix_binary(validator-keys)
+
+    configure_file(
+        "${validator_keys_SOURCE_DIR}/LICENSE"
+        "${CMAKE_BINARY_DIR}/validator-keys-LICENSE"
+        COPYONLY
     )
     install(TARGETS validator-keys RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR})
 endif()

cmake/add_module.cmake

@@ -1,4 +1,5 @@
 include(isolate_headers)
+include(verify_headers)
 
 # Create an OBJECT library target named
 #
@@ -37,4 +38,20 @@ function(add_module parent name)
         "${CMAKE_CURRENT_SOURCE_DIR}/src/lib${parent}/${name}"
         PRIVATE
     )
+    # protocol_autogen contains generated headers that are deliberately exempt
+    # from clang-tidy (see ExcludeHeaderFilterRegex in .clang-tidy), so we do not
+    # verify them either.
+    if(
+        verify_headers
+        AND NOT "${parent}/${name}" STREQUAL "xrpl/protocol_autogen"
+    )
+        verify_target_headers(
+            ${target}
+            "${CMAKE_CURRENT_SOURCE_DIR}/include/${parent}/${name}"
+        )
+        verify_target_headers(
+            ${target}
+            "${CMAKE_CURRENT_SOURCE_DIR}/src/lib${parent}/${name}"
+        )
+    endif()
 endfunction()

cmake/codegen/CMakeLists.txt

@@ -0,0 +1,21 @@
+#[===================================================================[
+   Protocol Autogen - Standalone project
+
+   Exposes the 'setup_code_gen' and 'code_gen' targets on their own, without
+   configuring the rest of xrpl. Code generation is pure Python, so this needs
+   neither the dependencies nor a compiler, which makes it usable in CI and by
+   contributors who only want to regenerate the protocol wrapper classes:
+
+     cmake -S cmake/codegen -B build/codegen
+     cmake --build build/codegen --target setup_code_gen
+     cmake --build build/codegen --target code_gen
+
+   The targets are identical to the ones offered by the top-level build, since
+   both come from cmake/XrplProtocolAutogen.cmake.
+#]===================================================================]
+
+cmake_minimum_required(VERSION 3.16)
+
+project(xrpl_codegen LANGUAGES NONE)
+
+include("${CMAKE_CURRENT_LIST_DIR}/../XrplProtocolAutogen.cmake")

cmake/scripts/codegen/templates/LedgerEntry.h.mako

@@ -2,6 +2,9 @@
 #pragma once
 
 #include <xrpl/protocol/STLedgerEntry.h>
+% if any(field.get('stiSuffix') == 'NUMBER' for field in fields):
+#include <xrpl/protocol/STNumber.h>  // IWYU pragma: keep
+% endif
 #include <xrpl/protocol/STParsedJSON.h>
 #include <xrpl/protocol/jss.h>
 #include <xrpl/protocol_autogen/LedgerEntryBase.h>
@@ -33,7 +36,7 @@ public:
      * @brief Construct a ${name} ledger entry wrapper from an existing SLE object.
      * @throws std::runtime_error if the ledger entry type doesn't match.
      */
-    explicit ${name}(std::shared_ptr<SLE const> sle)
+    explicit ${name}(SLE::const_pointer sle)
         : LedgerEntryBase(std::move(sle))
     {
         // Verify ledger entry type
@@ -168,7 +171,7 @@ ${field['typeData']['setter_type']} ${field['paramName']}${',' if i < len(requir
      * @param sle The existing ledger entry to copy from.
      * @throws std::runtime_error if the ledger entry type doesn't match.
      */
-    ${name}Builder(std::shared_ptr<SLE const> sle)
+    ${name}Builder(SLE::const_pointer sle)
     {
         if (sle->at(sfLedgerEntryType) != ${tag})
         {
@@ -177,7 +180,9 @@ ${field['typeData']['setter_type']} ${field['paramName']}${',' if i < len(requir
         object_ = *sle;
     }
 
-    /** @brief Ledger entry-specific field setters */
+    /**
+     * @brief Ledger entry-specific field setters
+     */
 % for field in fields:
 
     /**

cmake/scripts/codegen/templates/Transaction.h.mako

@@ -185,7 +185,9 @@ public:
         object_ = *tx;
     }
 
-    /** @brief Transaction-specific field setters */
+    /**
+     * @brief Transaction-specific field setters
+     */
 % for field in fields:
 
     /**

cmake/verify_headers.cmake

@@ -0,0 +1,84 @@
+# Our normal build only ever compiles `.cpp` files, so a header is only ever
+# checked through whatever translation unit happens to include it. A header that
+# is missing an `#include` is never caught as long as every `.cpp` that uses it
+# includes its missing dependency first. To check a header on its own we compile
+# it directly as a translation unit.
+#
+# Compiling the header itself - rather than a `.cpp` wrapper that includes it -
+# gives two checks at once:
+#   * the compiler fails if the header is not self-contained, i.e. it uses a
+#     declaration that is not available (directly or transitively); and
+#   * the header is the *main file* of its `compile_commands.json` entry, so
+#     clang-tidy's misc-include-cleaner analyses (and can --fix) the header's own
+#     includes - flagging a dependency that is only available transitively, which
+#     a plain compile cannot catch. A wrapper would be the main file instead, and
+#     include-cleaner never looks inside the headers a main file includes.
+#
+# The objects are never linked anywhere; we build them only for these checks.
+
+# Verify that the headers under headers_dir compile on their own, using the
+# compile environment of an existing target so each header is compiled exactly as
+# that target compiles it. This works for both add_module libraries and the xrpld
+# and test binaries: a library's isolated public and private include directories
+# and a binary's `-I src` both live in its INCLUDE_DIRECTORIES, and the modules or
+# libraries it links live in its LINK_LIBRARIES. We copy those usage requirements
+# through generator expressions (rather than linking ${target}, which is
+# impossible for an executable), evaluated at generation time so they capture
+# requirements the caller adds after this runs. The verify library is created
+# once; call this repeatedly to add more header directories.
+#
+# verify_target_headers(target headers_dir)
+function(verify_target_headers target headers_dir)
+    set(verify ${target}.verify)
+    if(NOT TARGET ${verify})
+        add_library(${verify} OBJECT EXCLUDE_FROM_ALL)
+        # A unity build would concatenate the headers into a single translation
+        # unit, where a header missing an include could be satisfied by one that
+        # precedes it in the blob - exactly the bug we want to catch.
+        set_target_properties(${verify} PROPERTIES UNITY_BUILD OFF)
+        target_include_directories(
+            ${verify}
+            PRIVATE $<TARGET_PROPERTY:${target},INCLUDE_DIRECTORIES>
+        )
+        target_compile_definitions(
+            ${verify}
+            PRIVATE $<TARGET_PROPERTY:${target},COMPILE_DEFINITIONS>
+        )
+        target_compile_options(
+            ${verify}
+            PRIVATE $<TARGET_PROPERTY:${target},COMPILE_OPTIONS>
+        )
+        target_link_libraries(
+            ${verify}
+            PRIVATE $<TARGET_PROPERTY:${target},LINK_LIBRARIES>
+        )
+        add_dependencies(verify-headers ${verify})
+    endif()
+    _verify_add_headers(${verify} "${headers_dir}")
+endfunction()
+
+# Add every .h/.hpp under dir to target as a directly-compiled C++ translation
+# unit. .ipp files are inline-implementation fragments included by their owning
+# header (often after a class declaration), so they are not self-contained on
+# their own and are verified transitively when that header is verified.
+function(_verify_add_headers target dir)
+    file(GLOB_RECURSE headers CONFIGURE_DEPENDS "${dir}/*.h" "${dir}/*.hpp")
+    if(NOT headers)
+        return()
+    endif()
+    # `-xc++` forces the header to be compiled as a C++ translation unit; a lone
+    # `.h` is otherwise treated as a header to precompile. `#pragma once` is
+    # harmless (and warns) when the header is the main file, so silence it.
+    # Compiled on its own, a header legitimately defines constants and static or
+    # template functions that nothing in this single translation unit uses (they
+    # exist for the files that include it), so the resulting unused-entity
+    # warnings are expected and must not fail the build under -Werror.
+    set_source_files_properties(
+        ${headers}
+        PROPERTIES
+            LANGUAGE CXX
+            COMPILE_OPTIONS
+                "-xc++;-Wno-pragma-once-outside-header;-Wno-unused-const-variable;-Wno-unused-function"
+    )
+    target_sources(${target} PRIVATE ${headers})
+endfunction()

conan.lock

@@ -1,43 +1,46 @@
 {
     "version": "0.5",
     "requires": [
-        "zlib/1.3.2#1cb806da49011867778ffb6ac7190fcb%1777558780.503",
-        "xxhash/0.8.3#681d36a0a6111fc56e5e45ea182c19cc%1765850149.987",
-        "sqlite3/3.53.0#324ada52333108388a9a6108bfa96734%1776096494.149",
-        "soci/4.0.3#fe32b9ad5eb47e79ab9e45a68f363945%1774450067.231",
-        "snappy/1.1.10#968fef506ff261592ec30c574d4a7809%1765850147.878",
-        "secp256k1/0.7.1#481881709eb0bdd0185a12b912bbe8ad%1770910500.329",
-        "rocksdb/10.5.1#4a197eca381a3e5ae8adf8cffa5aacd0%1765850186.86",
-        "re2/20251105#8579cfd0bda4daf0683f9e3898f964b4%1774398111.888",
-        "protobuf/6.33.5#d96d52ba5baaaa532f47bda866ad87a5%1774467363.12",
-        "openssl/3.6.2#4789bbf131b77d0515d15e094c8f697f%1778071755.506",
-        "nudb/2.0.9#11149c73f8f2baff9a0198fe25971fc7%1775040983.408",
-        "lz4/1.10.0#59fc63cac7f10fbe8e05c7e62c2f3504%1765850143.914",
-        "libiconv/1.17#1e65319e945f2d31941a9d28cc13c058%1765842973.492",
-        "libbacktrace/cci.20210118#a7691bfccd8caaf66309df196790a5a1%1765842973.03",
-        "libarchive/3.8.7#c446109bd1f1d8ba7936c94189bc50e6%1776147552.838",
+        "zlib/1.3.2#1cb806da49011867778ffb6ac7190fcb%1782392402.122708",
+        "xxhash/0.8.3#681d36a0a6111fc56e5e45ea182c19cc%1782392402.420688",
+        "sqlite3/3.53.0#324ada52333108388a9a6108bfa96734%1782392403.185447",
+        "soci/4.0.3#e726491a03468795453f7c83fc924a96%1782392402.679521",
+        "snappy/1.1.10#968fef506ff261592ec30c574d4a7809%1782307151.633168",
+        "secp256k1/0.7.1#b1f450b7f78a36fff75bb6934a356f3a%1782338841.3729",
+        "rocksdb/10.5.1#4a197eca381a3e5ae8adf8cffa5aacd0%1782392413.075713",
+        "re2/20251105#8579cfd0bda4daf0683f9e3898f964b4%1782392402.431897",
+        "protobuf/6.33.5#ff253ead763bd8d9904a52979cd21e81%1782392410.233933",
+        "openssl/3.6.3#f806de8933e3bf6f01016c6a888cee2e%1783945160.863288",
+        "nudb/2.0.9#11149c73f8f2baff9a0198fe25971fc7%1782392402.297166",
+        "mpt-crypto/1.0.2#b313cef0c1a493eb970ad185b2e9bab7%1784285108.866483",
+        "lz4/1.10.0#982d9b673900f665a1da109e09c17cab%1782392402.164188",
+        "libiconv/1.17#9923bc6dc6f106646d6967e0039a5ada%1782392792.775744",
+        "libbacktrace/cci.20210118#a7691bfccd8caaf66309df196790a5a1%1782392402.420732",
+        "libarchive/3.8.7#c446109bd1f1d8ba7936c94189bc50e6%1782392403.066892",
         "jemalloc/5.3.1#1fc58d55316041f10fbc1e8a2eae632a%1776700028.228",
-        "gtest/1.17.0#5224b3b3ff3b4ce1133cbdd27d53ee7d%1768312129.152",
-        "grpc/1.78.1#b1a9e74b145cc471bed4dc64dc6eb2c1%1774467387.342",
-        "ed25519/2015.03#ae761bdc52730a843f0809bdf6c1b1f6%1765850143.772",
-        "date/3.0.4#862e11e80030356b53c2c38599ceb32b%1765850143.772",
-        "c-ares/1.34.6#545240bb1c40e2cacd4362d6b8967650%1774439234.681",
-        "bzip2/1.0.8#c470882369c2d95c5c77e970c0c7e321%1765850143.837",
-        "boost/1.91.0#ea540ca2133d831b560036aa24dece3c%1778050991.9",
-        "abseil/20250127.0#bb0baf1f362bc4a725a24eddd419b8f7%1774365460.196"
+        "gtest/1.17.0#5224b3b3ff3b4ce1133cbdd27d53ee7d%1782392402.791979",
+        "grpc/1.81.1#f729f6d75992d20f9c72828e9142d62f%1783945160.094135",
+        "fast_float/8.2.10#f6f28d6bb22112078e7dbda611caf681%1782494504.298",
+        "ed25519/2015.03#ae761bdc52730a843f0809bdf6c1b1f6%1782307148.15562",
+        "date/3.0.4#862e11e80030356b53c2c38599ceb32b%1782392402.538492",
+        "c-ares/1.34.6#545240bb1c40e2cacd4362d6b8967650%1782392402.681654",
+        "bzip2/1.0.8#c470882369c2d95c5c77e970c0c7e321%1782392402.296732",
+        "boost/1.91.0#ea540ca2133d831b560036aa24dece3c%1782392419.475605",
+        "benchmark/1.9.5#b885dc73ad67b40a55d45684d1c88ad1%1782736613.864841",
+        "abseil/20250127.0#9ef01c1451a8340f9022e46238c0fbb6%1783945159.651047"
     ],
     "build_requires": [
-        "zlib/1.3.2#1cb806da49011867778ffb6ac7190fcb%1777558780.503",
-        "strawberryperl/5.32.1.1#8d114504d172cfea8ea1662d09b6333e%1774447376.964",
-        "protobuf/6.33.5#d96d52ba5baaaa532f47bda866ad87a5%1774467363.12",
-        "nasm/2.16.01#31e26f2ee3c4346ecd347911bd126904%1765850144.707",
+        "zlib/1.3.2#1cb806da49011867778ffb6ac7190fcb%1782392402.122708",
+        "strawberryperl/5.32.1.1#8d114504d172cfea8ea1662d09b6333e%1782395692.540639",
+        "protobuf/6.33.5#ff253ead763bd8d9904a52979cd21e81%1782392410.233933",
+        "nasm/2.16.01#31e26f2ee3c4346ecd347911bd126904%1782395690.33162",
         "msys2/cci.latest#d22fe7b2808f5fd34d0a7923ace9c54f%1770657326.649",
-        "m4/1.4.19#4523e4347b55cd26ae918bd5770cab9a%1778062762.471",
-        "cmake/4.3.0#b939a42e98f593fb34d3a8c5cc860359%1774439249.183",
-        "b2/5.4.2#ffd6084a119587e70f11cd45d1a386e2%1774439233.447",
+        "m4/1.4.19#1727f439cf74e83826ec96d0b4904eee%1784541921.659",
+        "cmake/4.3.3#840cf00ea09777e05c2050a50a82c722%1782392418.696091",
+        "b2/5.4.2#ffd6084a119587e70f11cd45d1a386e2%1782392402.624226",
         "automake/1.16.5#b91b7c384c3deaa9d535be02da14d04f%1755524470.56",
         "autoconf/2.71#51077f068e61700d65bb05541ea1e4b0%1731054366.86",
-        "abseil/20250127.0#bb0baf1f362bc4a725a24eddd419b8f7%1774365460.196"
+        "abseil/20250127.0#9ef01c1451a8340f9022e46238c0fbb6%1783945159.651047"
     ],
     "python_requires": [],
     "overrides": {
@@ -57,7 +60,7 @@
             "boost/1.91.0"
         ],
         "lz4/[>=1.9.4 <2]": [
-            "lz4/1.10.0#59fc63cac7f10fbe8e05c7e62c2f3504"
+            "lz4/1.10.0#982d9b673900f665a1da109e09c17cab"
         ]
     },
     "config_requires": []

conan/init.sh

@@ -0,0 +1,21 @@
+#!/usr/bin/env bash
+# Install our Conan configuration, profiles and the xrplf remote into CONAN_HOME.
+# Safe to re-run; never deletes the Conan home.
+
+set -euo pipefail
+
+SCRIPT_DIR="$(cd -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd)"
+CONAN_DIR="$(conan config home)"
+
+echo "Installing Conan configuration into ${CONAN_DIR}"
+conan config install "${SCRIPT_DIR}/global.conf"
+conan config install "${SCRIPT_DIR}/profiles" -tf "${CONAN_DIR}/profiles"
+# This script manages these files, so make them read-only - Conan does not
+# preserve the source mode. Only the files: the directories must stay writable
+# for `conan config install` to replace them.
+chmod a-w "${CONAN_DIR}/global.conf"
+find "${CONAN_DIR}/profiles" -type f -exec chmod a-w {} +
+
+echo "Adding the xrplf Conan remote"
+# --index 0: our patched recipes must win over Conan Center.
+conan remote add --index 0 --force xrplf https://conan.xrplf.org/repository/conan/

conan/lockfile/linux.profile

@@ -2,7 +2,7 @@
 arch=x86_64
 build_type=Release
 compiler=gcc
-compiler.cppstd=20
+compiler.cppstd=23
 compiler.libcxx=libstdc++11
 compiler.version=13
 os=Linux

conan/lockfile/macos.profile

@@ -2,7 +2,7 @@
 arch=armv8
 build_type=Release
 compiler=apple-clang
-compiler.cppstd=20
+compiler.cppstd=23
 compiler.libcxx=libc++
 compiler.version=17.0
 os=Macos

conan/lockfile/regenerate.sh

@@ -14,7 +14,7 @@ export CONAN_HOME="$TEMP_DIR"
 # Ensure that the xrplf remote is the first to be consulted, so any recipes we
 # patched are used. We also add it there to not created huge diff when the
 # official Conan Center Index is updated.
-conan remote add --force --index 0 xrplf https://conan.ripplex.io
+conan remote add --force --index 0 xrplf https://conan.xrplf.org/repository/conan/
 
 # Delete any existing lockfile.
 rm -f conan.lock

conan/lockfile/windows.profile

@@ -2,7 +2,7 @@
 arch=x86_64
 build_type=Release
 compiler=msvc
-compiler.cppstd=20
+compiler.cppstd=23
 compiler.runtime=dynamic
 compiler.runtime_type=Release
 compiler.version=194

conan/profiles/ci

@@ -1 +1,8 @@
+{% set os = detect_api.detect_os() %}
 include(sanitizers)
+
+[conf]
+{% if os == "Linux" %}
+user.package:libc_version=2.31
+tools.info.package_id:confs+=["user.package:libc_version"]
+{% endif %}

conan/profiles/default

@@ -1,25 +1,60 @@
 {% set os = detect_api.detect_os() %}
 {% set arch = detect_api.detect_arch() %}
 {% set compiler, version, compiler_exe = detect_api.detect_default_compiler() %}
-{% set compiler_version = version %}
-{% if os == "Linux" %}
 {% set compiler_version = detect_api.default_compiler_version(compiler, version) %}
+{% if os == "Macos" %}
+{# Minimum macOS the dependencies target. #}
+{# Without this, Conan builds each dependency against the (possibly newer) host SDK, so the #}
+{# dependency objects target a newer macOS than the binary and the linker warns. #}
+{# Keep at or below CMAKE_OSX_DEPLOYMENT_TARGET in CMakeLists.txt. #}
+{% set min_macos_version = "15.0" %}
 {% endif %}
 
 [settings]
 os={{ os }}
 arch={{ arch }}
 build_type=Debug
-compiler={{compiler}}
+compiler={{ compiler }}
 compiler.version={{ compiler_version }}
-compiler.cppstd=20
+compiler.cppstd=23
 {% if os == "Windows" %}
 compiler.runtime=static
 {% else %}
-compiler.libcxx={{detect_api.detect_libcxx(compiler, version, compiler_exe)}}
+compiler.libcxx={{ detect_api.detect_libcxx(compiler, version, compiler_exe) }}
+{% endif %}
+{% if os == "Macos" %}
+os.version={{ min_macos_version }}
 {% endif %}
 
 [conf]
-{% if compiler == "gcc" and compiler_version < 13 %}
-tools.build:cxxflags+=['-Wno-restrict']
+{# The Boost recipe builds with b2, which doesn't use Conan's toolchain files. #}
+{# Instead it hand-rolls the compiler for user-config.jam, #}
+{# and its fallback probes a version-suffixed binary (e.g. `g++-15`) before plain `g++`. #}
+{# Inside the Nix shell the wrapper only provides `g++`/`gcc` (no `-15` suffix), #}
+{# so on a host that also has a system `g++-15` the probe escapes Nix #}
+{# and picks the system compiler, which is mismatched with the Nix libraries #}
+{# and breaks the build (e.g. Boost.Stacktrace link checks fail). #}
+{# Pinning the executables here short-circuits that probe so Boost (and the rest of the toolchain) #}
+{# resolve the same compiler. #}
+{# Not part of the package ID, so binaries stay shareable. #}
+{% if os != "Windows" %}
+{% set cc_exe  = {"gcc": "gcc",  "clang": "clang",   "apple-clang": "clang"}.get(compiler) %}
+{% set cxx_exe = {"gcc": "g++",  "clang": "clang++", "apple-clang": "clang++"}.get(compiler) %}
+tools.build:compiler_executables={'c':'{{ cc_exe }}','cpp':'{{ cxx_exe }}'}
+{% endif %}
+
+{# By default, Conan tries to reuse binaries built with different cppstd versions. #}
+{# We want to avoid that to improve reproduceability, so we add the cppstd version to the package ID. #}
+{# More info: https://docs.conan.io/2/reference/extensions/binary_compatibility.html #}
+user.package:cppstd_version=23
+tools.info.package_id:confs+=["user.package:cppstd_version"]
+
+{% if os == "Macos" %}
+[buildenv]
+{# os.version adds -mmacosx-version-min to compiler command lines, #}
+{# but Boost.Context's b2 assembly (.S) rule ignores it, #}
+{# so those objects keep the host SDK version and still warn at link time. #}
+{# clang's assembler honors this env var regardless, pinning them. #}
+{# Scoped to boost/* since it is the only gap. #}
+boost/*:MACOSX_DEPLOYMENT_TARGET={{ min_macos_version }}
 {% endif %}

conan/profiles/sanitizers

@@ -52,52 +52,50 @@ include(default)
 {% endif %}
 
 {# Frame pointer required for meaningful stack traces; -O1 for reasonable performance #}
-{% set compile_flags = ["-fno-omit-frame-pointer", "-O1"] %}
+{% set sanitizer_compiler_flags = ["-fno-omit-frame-pointer", "-O1"] %}
 
 {% if compiler == "gcc" %}
     {# Suppress false positive warnings with GCC #}
-    {% set _ = compile_flags.append("-Wno-stringop-overflow") %}
+    {% set _ = sanitizer_compiler_flags.append("-Wno-stringop-overflow") %}
 
     {% set relocation_flags = [] %}
 
     {% if arch == "x86_64" and enable_asan %}
         {# Large code model prevents relocation errors in instrumented ASAN binaries #}
-        {% set _ = compile_flags.append("-mcmodel=large") %}
+        {% set _ = sanitizer_compiler_flags.append("-mcmodel=large") %}
         {% set _ = relocation_flags.append("-mcmodel=large") %}
     {% elif enable_tsan %}
         {# GCC doesn't support atomic_thread_fence with TSAN; suppress warnings #}
-        {% set _ = compile_flags.append("-Wno-tsan") %}
+        {% set _ = sanitizer_compiler_flags.append("-Wno-tsan") %}
         {% if arch == "x86_64" %}
             {# Medium code model for TSAN; large is incompatible #}
-            {% set _ = compile_flags.append("-mcmodel=medium") %}
+            {% set _ = sanitizer_compiler_flags.append("-mcmodel=medium") %}
             {% set _ = relocation_flags.append("-mcmodel=medium") %}
         {% endif %}
     {% endif %}
 
     {% set fsanitize = "-fsanitize=" ~ ",".join(sanitizer_types) %}
-    {% set _ = compile_flags.append(fsanitize) %}
+    {% set _ = sanitizer_compiler_flags.append(fsanitize) %}
     {% set _ = relocation_flags.append(fsanitize) %}
 
-    {% set sanitizer_compiler_flags = " ".join(compile_flags) %}
-    {% set sanitizer_linker_flags = " ".join(relocation_flags) %}
+    {% set sanitizer_linker_flags = relocation_flags %}
 {% elif compiler == "clang" or compiler == "apple-clang" %}
     {% set fsanitize = "-fsanitize=" ~ ",".join(sanitizer_types) %}
-    {% set _ = compile_flags.append(fsanitize) %}
+    {% set _ = sanitizer_compiler_flags.append(fsanitize) %}
 
-    {% set sanitizer_compiler_flags = " ".join(compile_flags) %}
-    {% set sanitizer_linker_flags = fsanitize %}
+    {% set sanitizer_linker_flags = [fsanitize] %}
 {% endif %}
 
 [conf]
-tools.build:defines+={{defines}}
-tools.build:cxxflags+=['{{sanitizer_compiler_flags}}']
-tools.build:sharedlinkflags+=['{{sanitizer_linker_flags}}']
-tools.build:exelinkflags+=['{{sanitizer_linker_flags}}']
+tools.build:defines+={{ defines }}
+tools.build:cxxflags+={{ sanitizer_compiler_flags }}
+tools.build:sharedlinkflags+={{ sanitizer_linker_flags }}
+tools.build:exelinkflags+={{ sanitizer_linker_flags }}
 
 tools.info.package_id:confs+=["tools.build:cxxflags", "tools.build:exelinkflags", "tools.build:sharedlinkflags", "tools.build:defines"]
 
 # &: means "apply only to the consumer/root package"
-&:tools.cmake.cmaketoolchain:extra_variables={"SANITIZERS": "{{sanitizers}}", "SANITIZERS_COMPILER_FLAGS": "{{sanitizer_compiler_flags}}", "SANITIZERS_LINKER_FLAGS": "{{sanitizer_linker_flags}}"}
+&:tools.cmake.cmaketoolchain:extra_variables={"SANITIZERS": "{{ sanitizers }}", "SANITIZERS_COMPILER_FLAGS": "{{ sanitizer_compiler_flags | join(' ') }}", "SANITIZERS_LINKER_FLAGS": "{{ sanitizer_linker_flags | join(' ') }}"}
 
 [options]
 {% if enable_asan %}

conanfile.py

@@ -15,6 +15,7 @@ class Xrpl(ConanFile):
     settings = "os", "compiler", "build_type", "arch"
     options = {
         "assertions": [True, False],
+        "benchmark": [True, False],
         "coverage": [True, False],
         "fPIC": [True, False],
         "jemalloc": [True, False],
@@ -28,11 +29,11 @@ class Xrpl(ConanFile):
 
     requires = [
         "ed25519/2015.03",
-        "grpc/1.78.1",
+        "fast_float/8.2.10",
+        "grpc/1.81.1",
         "libarchive/3.8.7",
         "nudb/2.0.9",
-        "openssl/3.6.2",
-        "secp256k1/0.7.1",
+        "openssl/3.6.3",
         "soci/4.0.3",
         "zlib/1.3.2",
     ]
@@ -47,6 +48,7 @@ class Xrpl(ConanFile):
 
     default_options = {
         "assertions": False,
+        "benchmark": True,
         "coverage": False,
         "fPIC": True,
         "jemalloc": False,
@@ -130,15 +132,19 @@ class Xrpl(ConanFile):
             self.options["boost"].without_cobalt = True
 
     def requirements(self):
+        if self.options.benchmark:
+            self.requires("benchmark/1.9.5")
         self.requires("boost/1.91.0", force=True, transitive_headers=True)
         self.requires("date/3.0.4", transitive_headers=True)
-        self.requires("lz4/1.10.0", force=True)
-        self.requires("protobuf/6.33.5", force=True)
-        self.requires("sqlite3/3.53.0", force=True)
         if self.options.jemalloc:
             self.requires("jemalloc/5.3.1")
+        self.requires("lz4/1.10.0", force=True)
+        self.requires("mpt-crypto/1.0.2", transitive_headers=True)
+        self.requires("protobuf/6.33.5", force=True)
         if self.options.rocksdb:
             self.requires("rocksdb/10.5.1")
+        self.requires("secp256k1/0.7.1", transitive_headers=True)
+        self.requires("sqlite3/3.53.0", force=True)
         self.requires("xxhash/0.8.3", transitive_headers=True)
 
     exports_sources = (
@@ -161,6 +167,7 @@ class Xrpl(ConanFile):
     def generate(self):
         tc = CMakeToolchain(self)
         tc.variables["tests"] = self.options.tests
+        tc.variables["benchmark"] = self.options.benchmark
         tc.variables["assert"] = self.options.assertions
         tc.variables["coverage"] = self.options.coverage
         tc.variables["jemalloc"] = self.options.jemalloc
@@ -205,9 +212,11 @@ class Xrpl(ConanFile):
             "boost::thread",
             "date::date",
             "ed25519::ed25519",
+            "fast_float::fast_float",
             "grpc::grpc++",
             "libarchive::libarchive",
             "lz4::lz4",
+            "mpt-crypto::mpt-crypto",
             "nudb::nudb",
             "openssl::crypto",
             "protobuf::libprotobuf",

docker/check-sanitizers.sh

@@ -1,48 +0,0 @@
-#!/bin/bash
-
-# Sanity-check that the sanitizer runtimes shipped with g++/clang++ work
-# end-to-end against the system loader: compile each example with both
-# compilers, run it, and confirm the expected diagnostic is emitted.
-
-set -eo pipefail
-
-cpp_files_dir="${1:?usage: $0 <cpp_files_dir>}"
-
-case "$(uname -m)" in
-    x86_64) loader=/lib64/ld-linux-x86-64.so.2 ;;
-    aarch64) loader=/lib/ld-linux-aarch64.so.1 ;;
-    *)
-        echo "Unsupported arch: $(uname -m)" >&2
-        exit 1
-        ;;
-esac
-
-declare -A sanitize=(
-    [asan]="-fsanitize=address"
-    [tsan]="-fsanitize=thread"
-    [ubsan]="-fsanitize=undefined"
-)
-declare -A expect=(
-    [asan]="heap-use-after-free"
-    [tsan]="data race"
-    [ubsan]="signed integer overflow"
-)
-
-for compiler in g++ clang++; do
-    for name in asan tsan ubsan; do
-        bin="/tmp/${name}-${compiler}"
-        echo "=== Build ${name} with ${compiler} ==="
-        "$compiler" -std=c++20 -O1 -g ${sanitize[$name]} \
-            -Wl,--dynamic-linker=$loader \
-            "${cpp_files_dir}/${name}.cpp" -o "$bin"
-        echo "=== Run ${name}-${compiler} ==="
-        output=$("$bin" 2>&1) || true
-        echo "$output"
-        echo "$output" | grep -q "${expect[$name]}" ||
-            {
-                echo "expected '${expect[$name]}' from $bin"
-                exit 1
-            }
-        rm -f "$bin"
-    done
-done

docker/nix.Dockerfile

@@ -1,95 +0,0 @@
-ARG BASE_IMAGE=nixos/nix:latest
-
-# Nix builder
-FROM nixos/nix:latest AS builder-source
-
-RUN mkdir -p ~/.config/nix && \
-    echo "experimental-features = nix-command flakes" >> ~/.config/nix/nix.conf
-
-# Copy our source and setup our working dir.
-COPY nix/ci-env.nix /tmp/build/nix/ci-env.nix
-COPY nix/packages.nix /tmp/build/nix/packages.nix
-COPY nix/utils.nix /tmp/build/nix/utils.nix
-COPY flake.nix /tmp/build/
-COPY flake.lock /tmp/build/
-WORKDIR /tmp/build
-
-FROM builder-source AS builder
-
-# Build our Nix CI environment (all build tools in a single store path)
-RUN nix \
-    --option filter-syscalls false \
-    build
-
-# Copy the Nix store closure into a directory. The Nix store closure is the
-# entire set of Nix store values that we need for our build.
-RUN mkdir /tmp/nix-store-closure && \
-    cp -R $(nix-store -qR result/) /tmp/nix-store-closure
-
-# Final image
-FROM ${BASE_IMAGE}
-
-# bash is not located at /bin/bash in nixos/nix, so we need to create a symlink to it.
-RUN if [ -d /nix ]; then \
-        ln -s /root/.nix-profile/bin/bash /bin/bash; \
-    fi
-
-# Use Bash as the default shell for RUN commands, using the options
-# `set -o errexit -o pipefail`, and as the entrypoint.
-SHELL ["/bin/bash", "-e", "-o", "pipefail", "-c"]
-ENTRYPOINT ["/bin/bash"]
-
-# Copy /nix/store and the env symlink tree
-COPY --from=builder /tmp/nix-store-closure /nix/store
-COPY --from=builder /tmp/build/result /nix/ci-env
-
-ENV PATH="/nix/ci-env/bin:$PATH"
-
-# Externally-built dynamically-linked ELF binaries hard-code the loader path
-# (e.g. /lib64/ld-linux-x86-64.so.2) in their PT_INTERP header. Copy the
-# loader from the Nix store to that path when the base image doesn't already
-# provide one (i.e. on nixos/nix).
-RUN <<EOF
-case "$(uname -m)" in
-    x86_64)  target=/lib64/ld-linux-x86-64.so.2 ;;
-    aarch64) target=/lib/ld-linux-aarch64.so.1 ;;
-    *) echo "Unsupported arch: $(uname -m)" >&2; exit 1 ;;
-esac
-if [ ! -e "$target" ]; then
-    # Use the loader from the same glibc that gcc links libc against, so
-    # ld-linux and libc/libpthread share GLIBC_PRIVATE symbols at runtime.
-    src="$(dirname "$(gcc -print-file-name=libc.so.6)")/$(basename "$target")"
-    [ -e "$src" ] || { echo "ld-linux not found at $src" >&2; exit 1; }
-    mkdir -p "$(dirname "$target")"
-    cp "$src" "$target"
-fi
-EOF
-
-RUN <<EOF
-ccache --version
-clang --version
-clang++ --version
-clang-format --version
-cmake --version
-conan --version
-g++ --version
-gcc --version
-gcovr --version
-git --version
-make --version
-mold --version
-ninja --version
-perl --version
-pkg-config --version
-pre-commit --version
-python3 --version
-run-clang-tidy --help
-vim --version
-EOF
-
-# Sanity-check that the sanitizer runtimes shipped with g++/clang++ work
-# end-to-end against the system loader.
-COPY docker/cpp_files/ /tmp/cpp_files/
-COPY docker/check-sanitizers.sh /tmp/check-sanitizers.sh
-
-RUN grep -qi ubuntu /etc/os-release 2>/dev/null && /tmp/check-sanitizers.sh /tmp/cpp_files || true

docs/0001-negative-unl/README.md

@@ -288,7 +288,7 @@ components with non-trivial changes are colored green.
     validated.
 
 ![Sequence diagram](./negativeUNL_highLevel_sequence.png?raw=true "Negative UNL
- Changes")
+Changes")
 
 ## Roads Not Taken
 

docs/build/advanced_conan.md

@@ -0,0 +1,193 @@
+# Advanced Conan configuration
+
+This document provides advanced instructions for setting up and configuring Conan for `xrpld` development: custom profiles, the lockfile, patched recipes, and profile tweaks.
+
+## Custom profile
+
+If the default profile does not work for you and you do not yet have a Conan
+profile, you can create one by running:
+
+```bash
+conan profile detect
+```
+
+You may need to make changes to the profile to suit your environment. You can
+refer to the provided `conan/profiles/default` profile for inspiration, and you
+may also need to apply the required [tweaks](#conan-profile-tweaks) to this
+default profile.
+
+## Conan lockfile
+
+To achieve reproducible dependencies, we use a [Conan lockfile](https://docs.conan.io/2/tutorial/versioning/lockfiles.html),
+which has to be updated every time dependencies change.
+
+Please see the [instructions on how to regenerate the lockfile](../../conan/lockfile/README.md).
+
+## Patched recipes
+
+Occasionally, we need patched recipes or recipes not present in Conan Center.
+We maintain a fork of the Conan Center Index
+[here](https://github.com/XRPLF/conan-center-index/) containing the modified and newly added recipes.
+
+To ensure our patched recipes are used, you must add our Conan remote at a
+higher index than the default Conan Center remote, so it is consulted first. You
+can do this by running:
+
+```bash
+conan remote add --index 0 --force xrplf https://conan.xrplf.org/repository/conan/
+```
+
+Alternatively, you can pull our recipes from the repository and export them locally:
+
+```bash
+# Define which recipes to export.
+recipes=('abseil' 'ed25519' 'mpt-crypto' 'openssl' 'secp256k1' 'snappy' 'soci' 'wasm-xrplf' 'wasmi')
+
+# Selectively check out the recipes from our CCI fork.
+cd external
+mkdir -p conan-center-index
+cd conan-center-index
+git init
+git remote add origin git@github.com:XRPLF/conan-center-index.git
+git sparse-checkout init
+for recipe in "${recipes[@]}"; do
+    echo "Checking out recipe '${recipe}'..."
+    git sparse-checkout add recipes/${recipe}
+done
+git fetch origin master
+git checkout master
+
+./export_all.sh
+cd ../../
+```
+
+In the case we switch to a newer version of a dependency that still requires a
+patch or add a new dependency, it will be necessary for you to pull in the changes and re-export the
+updated dependencies with the newer version. However, if we switch to a newer
+version that no longer requires a patch, no action is required on your part, as
+the new recipe will be automatically pulled from the official Conan Center.
+
+> [!NOTE]
+> You might need to add `--lockfile=""` to your `conan install` command
+> to avoid automatic use of the existing `conan.lock` file when you run
+> `conan export` manually on your machine
+>
+> This is not recommended though, as you might end up using different revisions of recipes.
+
+## Conan profile tweaks
+
+### Missing compiler version
+
+If you see an error similar to the following after running `conan profile show`:
+
+```text
+ERROR: Invalid setting '17' is not a valid 'settings.compiler.version' value.
+Possible values are ['5.0', '5.1', '6.0', '6.1', '7.0', '7.3', '8.0', '8.1',
+'9.0', '9.1', '10.0', '11.0', '12.0', '13', '13.0', '13.1', '14', '14.0', '15',
+'15.0', '16', '16.0']
+Read "http://docs.conan.io/2/knowledge/faq.html#error-invalid-setting"
+```
+
+you need to create `$(conan config home)/settings_user.yml` file if it doesn't exist and add the required version number(s)
+to the `version` array specific for your compiler. For example:
+
+```yaml
+compiler:
+  apple-clang:
+    version: ["17.0"]
+```
+
+### Multiple compilers
+
+If you have multiple compilers installed, make sure to select the one to use in
+your default Conan configuration **before** running `conan profile detect`, by
+setting the `CC` and `CXX` environment variables.
+
+For example, if you are running MacOS and have [homebrew
+LLVM@18](https://formulae.brew.sh/formula/llvm@18), and want to use it as a
+compiler in the new Conan profile:
+
+```bash
+export CC=$(brew --prefix llvm@18)/bin/clang
+export CXX=$(brew --prefix llvm@18)/bin/clang++
+conan profile detect
+```
+
+You should also explicitly set the path to the compiler in the profile file,
+which helps to avoid errors when `CC` and/or `CXX` are set and disagree with the
+selected Conan profile. For example:
+
+```text
+[conf]
+tools.build:compiler_executables={'c':'/usr/bin/gcc','cpp':'/usr/bin/g++'}
+```
+
+### Multiple profiles
+
+You can manage multiple Conan profiles in the directory
+`$(conan config home)/profiles`, for example renaming `default` to a different
+name and then creating a new `default` profile for a different compiler.
+
+### Select language
+
+The default profile created by Conan will typically select different C++ dialect
+than C++23 used by this project. You should set `23` in the profile line
+starting with `compiler.cppstd=`. For example:
+
+```bash
+sed -i.bak -e 's|^compiler\.cppstd=.*$|compiler.cppstd=23|' $(conan config home)/profiles/default
+```
+
+### Select standard library in Linux
+
+**Linux** developers will commonly have a default Conan [profile][] that
+compiles with GCC and links with libstdc++. If you are linking with libstdc++
+(see profile setting `compiler.libcxx`), then you will need to choose the
+`libstdc++11` ABI:
+
+```bash
+sed -i.bak -e 's|^compiler\.libcxx=.*$|compiler.libcxx=libstdc++11|' $(conan config home)/profiles/default
+```
+
+### Select architecture and runtime in Windows
+
+**Windows** developers may need to use the x64 native build tools. An easy way
+to do that is to run the shortcut "x64 Native Tools Command Prompt" for the
+version of Visual Studio that you have installed.
+
+Windows developers must also build `xrpld` and its dependencies for the x64
+architecture:
+
+```bash
+sed -i.bak -e 's|^arch=.*$|arch=x86_64|' $(conan config home)/profiles/default
+```
+
+**Windows** developers also must select static runtime:
+
+```bash
+sed -i.bak -e 's|^compiler\.runtime=.*$|compiler.runtime=static|' $(conan config home)/profiles/default
+```
+
+## Add a Dependency
+
+If you want to experiment with a new package, follow these steps:
+
+1. Search for the package on [Conan Center](https://conan.io/center/).
+2. Modify [`conanfile.py`](../../conanfile.py):
+   - Add a version of the package to the `requires` property.
+   - Change any default options for the package by adding them to the
+     `default_options` property (with syntax `'$package:$option': $value`).
+3. Regenerate the [Conan lockfile](../../conan/lockfile/README.md) so the new
+   dependency is captured:
+
+   ```bash
+   ./conan/lockfile/regenerate.sh
+   ```
+
+4. Modify [`CMakeLists.txt`](../../CMakeLists.txt):
+   - Add a call to `find_package($package REQUIRED)`.
+   - Link a library from the package to the target `xrpl_libs`
+     (search for the existing call to `target_link_libraries(xrpl_libs INTERFACE ...)`).
+5. Start coding! Don't forget to include whatever headers you need from the package.
+
+[profile]: https://docs.conan.io/2/reference/config_files/profiles.html

docs/build/conan.md

@@ -115,7 +115,7 @@ By default, Conan will use the profile named "default".
 [find_package]: https://cmake.org/cmake/help/latest/command/find_package.html
 [pcf]: https://cmake.org/cmake/help/latest/manual/cmake-packages.7.html#package-configuration-file
 [prefix_path]: https://cmake.org/cmake/help/latest/variable/CMAKE_PREFIX_PATH.html
-[profile]: https://docs.conan.io/en/latest/reference/profiles.html
+[profile]: https://docs.conan.io/2/reference/config_files/profiles.html
 [pvf]: https://cmake.org/cmake/help/latest/manual/cmake-packages.7.html#package-version-file
 [runtime]: https://cmake.org/cmake/help/latest/variable/CMAKE_MSVC_RUNTIME_LIBRARY.html
 [search]: https://cmake.org/cmake/help/latest/command/find_package.html#search-procedure

docs/build/environment.md

@@ -1,69 +1,99 @@
 Our [build instructions][BUILD.md] assume you have a C++ development
 environment complete with Git, Python, Conan, CMake, and a C++ compiler.
-This document exists to help readers set one up on any of the Big Three
-platforms: Linux, macOS, or Windows.
-
-As an alternative to system packages, the Nix development shell can be used to provide a development environment. See [using nix development shell](./nix.md) for more details.
+This document explains how to set one up.
 
 [BUILD.md]: ../../BUILD.md
 
-## Linux
+## Tested compiler versions
 
-Package ecosystems vary across Linux distributions,
-so there is no one set of instructions that will work for every Linux user.
-The instructions below are written for Debian 12 (Bookworm).
+`xrpld` is built in the **C++23** dialect by default, so your toolchain has to
+support it — see [compiler support for C++23][cpp23-support].
+The versions currently tested in CI are:
 
-```
-export GCC_RELEASE=12
-sudo apt update
-sudo apt install --yes gcc-${GCC_RELEASE} g++-${GCC_RELEASE} python3-pip \
-  python-is-python3 python3-venv python3-dev curl wget ca-certificates \
-  git build-essential cmake ninja-build libc6-dev
-sudo pip install --break-system-packages conan
+| Compiler    | Version            |
+| ----------- | ------------------ |
+| GCC         | 15.2               |
+| Clang       | 22                 |
+| Apple Clang | 21                 |
+| MSVC        | Visual Studio 2026 |
 
-sudo update-alternatives --install /usr/bin/cc cc /usr/bin/gcc-${GCC_RELEASE} 999
-sudo update-alternatives --install \
-  /usr/bin/gcc gcc /usr/bin/gcc-${GCC_RELEASE} 100 \
-  --slave /usr/bin/g++ g++ /usr/bin/g++-${GCC_RELEASE} \
-  --slave /usr/bin/gcc-ar gcc-ar /usr/bin/gcc-ar-${GCC_RELEASE} \
-  --slave /usr/bin/gcc-nm gcc-nm /usr/bin/gcc-nm-${GCC_RELEASE} \
-  --slave /usr/bin/gcc-ranlib gcc-ranlib /usr/bin/gcc-ranlib-${GCC_RELEASE} \
-  --slave /usr/bin/gcov gcov /usr/bin/gcov-${GCC_RELEASE} \
-  --slave /usr/bin/gcov-tool gcov-tool /usr/bin/gcov-tool-${GCC_RELEASE} \
-  --slave /usr/bin/gcov-dump gcov-dump /usr/bin/gcov-dump-${GCC_RELEASE} \
-  --slave /usr/bin/lto-dump lto-dump /usr/bin/lto-dump-${GCC_RELEASE}
-sudo update-alternatives --auto cc
-sudo update-alternatives --auto gcc
+LLVM tools (`clang-tidy` and `clang-format`) are also pinned to version 22.
+
+### Older compilers
+
+Older compilers may fail to build the latest `develop` code: the codebase now
+relies on C++23 features and has been adjusted for `clang-tidy`.
+If the latest code doesn't build for you, update your build toolchain first.
+
+If updating isn't an option for you, we do accept pull requests that fix builds
+on older compilers, as long as the change is small and doesn't make the code
+harder to read. What we can't promise is that older compilers will keep working:
+only the versions in the table above are tested in CI, and we won't hold back
+the use of C++23 features or add invasive workarounds to keep an untested
+compiler building. Treat support for anything outside the table as best-effort.
+
+## Required tools
+
+Besides a compiler, building `xrpld` requires:
+
+| Tool                                        | Minimum version |
+| ------------------------------------------- | --------------- |
+| [Git](https://git-scm.com/downloads)        | any recent      |
+| [Python](https://www.python.org/downloads/) | 3.11            |
+| [Conan](https://conan.io/downloads.html)    | 2.17            |
+| [CMake](https://cmake.org/download/)        | 3.16            |
+
+On Linux and macOS, the [Nix development shell](./nix.md) provides all of them
+(see below). On Windows they have to be installed manually.
+
+Once they are in place, verify that everything is installed and runnable with:
+
+```bash
+./bin/check-tools.sh
 ```
 
-If you use different Linux distribution, hope the instruction above can guide
-you in the right direction. We try to maintain compatibility with all recent
-compiler releases, so if you use a rolling distribution like e.g. Arch or CentOS
-then there is a chance that everything will "just work".
+## Linux and macOS
 
-## macOS
-
-Open a Terminal and enter the below command to bring up a dialog to install
-the command line developer tools.
-Once it is finished, this command should return a version greater than the
-minimum required (see [BUILD.md][]).
+The **recommended way** to get a development environment on Linux and macOS is
+the Nix development shell. It provides the exact tooling used in CI — `git`,
+`python`, `conan`, `cmake`, `clang-tidy`, `clang-format`, and everything else —
+with a single command and without installing anything system-wide:
 
+```bash
+nix --experimental-features 'nix-command flakes' develop
 ```
+
+On **Linux**, Nix also provides the compiler (GCC); on **macOS**, it provides
+Clang. If you instead opt to use your system-wide Apple Clang (via
+`nix develop .#apple-clang`), you need to manage its version yourself (see
+below).
+
+See [Using the Nix development shell](./nix.md) for installation and usage
+details, including how to select a different compiler and why we recommend Nix
+over a hand-maintained environment.
+
+### macOS: managing the Apple Clang version
+
+If you use your system-wide Apple Clang on macOS (via `nix develop .#apple-clang`),
+the compiler version is whatever your installed Xcode (or Command Line Tools)
+provides. The following command should return a version greater than or equal to
+the [tested one](#tested-compiler-versions):
+
+```bash
 clang --version
 ```
 
-### Install Xcode Specific Version (Optional)
-
-If you develop other applications using XCode you might be consistently updating to the newest version of Apple Clang.
-This will likely cause issues building xrpld. You may want to install a specific version of Xcode:
+If you develop other applications using Xcode, you might be consistently
+updating to the newest version of Apple Clang, which will likely cause issues
+building xrpld. You may want to install and pin a specific version of Xcode:
 
 1. **Download Xcode**
    - Visit [Apple Developer Downloads](https://developer.apple.com/download/more/)
    - Sign in with your Apple Developer account
-   - Search for an Xcode version that includes **Apple Clang (Expected Version)**
+   - Search for an Xcode version that includes the expected Apple Clang version
    - Download the `.xip` file
 
-2. **Install and Configure Xcode**
+2. **Install and configure Xcode**
 
    ```bash
    # Extract the .xip file and rename for version management
@@ -79,62 +109,28 @@ This will likely cause issues building xrpld. You may want to install a specific
    export DEVELOPER_DIR=/Applications/Xcode_16.2.app/Contents/Developer
    ```
 
-The command line developer tools should include Git too:
+## Windows
 
-```
-git --version
-```
+Nix is not available on Windows, so the required tools have to be installed
+manually:
 
-Install [Homebrew][],
-use it to install [pyenv][],
-use it to install Python,
-and use it to install Conan:
-
-[Homebrew]: https://brew.sh/
-[pyenv]: https://github.com/pyenv/pyenv
-
-```
-/bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)"
-brew update
-brew install xz
-brew install pyenv
-pyenv install 3.11
-pyenv global 3.11
-eval "$(pyenv init -)"
-pip install 'conan'
-```
-
-Install CMake with Homebrew too:
-
-```
-brew install cmake
-```
+- [Visual Studio 2026](https://visualstudio.microsoft.com/) with the
+  **"Desktop development with C++"** workload — this provides MSVC and the
+  "x64 Native Tools Command Prompt". CI configures CMake with the
+  `Visual Studio 18 2026` generator.
+- [Git for Windows](https://git-scm.com/download/win)
+- Python, Conan, and CMake, at the versions listed in
+  [Required tools](#required-tools).
 
 ## Clang-tidy
 
-Clang-tidy is required to run static analysis checks locally (see [CONTRIBUTING.md](../../CONTRIBUTING.md)).
-It is not required to build the project. Currently this project uses clang-tidy version 21.
+`clang-tidy` is required to run static analysis checks locally (see
+[CONTRIBUTING.md](../../CONTRIBUTING.md)). It is not required to build the
+project. The version this project uses is listed in
+[Tested compiler versions](#tested-compiler-versions).
 
-### Linux
+On Linux and macOS, the [Nix development shell](./nix.md) provides that exact
+version out of the box — run it via `run-clang-tidy`. No separate installation
+is needed.
 
-LLVM 21 is not available in the default Debian 12 (Bookworm) repositories.
-Install it using the official LLVM apt installer:
-
-```
-wget https://apt.llvm.org/llvm.sh
-chmod +x llvm.sh
-sudo ./llvm.sh 21
-sudo apt install --yes clang-tidy-21
-```
-
-Then use `run-clang-tidy-21` when running clang-tidy locally.
-
-### macOS
-
-Install LLVM 21 via Homebrew:
-
-```
-brew install llvm@21
-```
-
-Then use `run-clang-tidy` from the LLVM 21 Homebrew prefix when running clang-tidy locally.
+[cpp23-support]: https://en.cppreference.com/w/cpp/compiler_support/23

docs/build/nix.md

@@ -2,11 +2,14 @@
 
 This guide explains how to use Nix to set up a reproducible development environment for xrpld. Using Nix eliminates the need to manually install utilities and ensures consistent tooling across different machines.
 
+**The Nix development shell is the recommended way to develop xrpld.** It unifies the development environment for everyone and synchronizes updates: the same tooling and compiler versions are used both here and in CI. Any custom environment (Homebrew packages or anything else) will continue to work, but then it is up to you to keep it in sync with the environment used in CI.
+
 ## Benefits of Using Nix
 
 - **Reproducible environment**: Everyone gets the same versions of tools and compilers
+- **Matches CI**: The Linux CI runs in Docker images built from this exact Nix environment
 - **No system pollution**: Dependencies are isolated and don't affect your system packages
-- **Multiple compiler versions**: Easily switch between different GCC and Clang versions
+- **Consistent compilers**: The GCC and Clang shells use the same versions as CI
 - **Quick setup**: Get started with a single command
 - **Works on Linux and macOS**: Consistent experience across platforms
 
@@ -28,11 +31,24 @@ This will:
 
 - Download and set up all required development tools (CMake, Ninja, Conan, etc.)
 - Configure the appropriate compiler for your platform:
-  - **macOS**: Apple Clang (default system compiler)
-  - **Linux**: GCC 15
+  - **Linux**: GCC (provided by Nix)
+  - **macOS**: Clang (provided by Nix)
 
 The first time you run this command, it will take a few minutes to download and build the environment. Subsequent runs will be much faster.
 
+### Platform notes
+
+- **Linux**: `nix develop` gives you a shell with all the tooling necessary to develop xrpld
+  and with the same GCC/glibc toolchain that Nix builds for CI.
+  See [Choosing a different compiler](#choosing-a-different-compiler)
+  for the custom-vs-plain toolchain trade-off.
+- **macOS**: `nix develop` gives you a full environment too, with Clang (and
+  every other tool, including Conan) provided by Nix. To use your system-wide
+  Apple Clang instead, enter `nix develop .#apple-clang`. Conan has no binary in
+  the Nix cache for macOS, so it is built from source the first time you enter
+  the shell, which makes the initial setup slower (this is handled
+  automatically; see [`nix/devshell.nix`](../../nix/devshell.nix)).
+
 > [!TIP]
 > To avoid typing `--experimental-features 'nix-command flakes'` every time, you can permanently enable flakes by creating `~/.config/nix/nix.conf`:
 >
@@ -48,48 +64,119 @@ The first time you run this command, it will take a few minutes to download and
 
 ### Choosing a different compiler
 
-A compiler can be chosen by providing its name with the `.#` prefix, e.g. `nix develop .#gcc15`.
+A compiler can be chosen by providing its name with the `.#` prefix, e.g. `nix develop .#clang`.
+
+On Linux, `.#gcc` and `.#clang` provide the exact toolchain CI uses:
+the compiler (pinned in [`nix/packages.nix`](../../nix/packages.nix))
+rebuilt against the pinned custom glibc (see [`nix/compilers.nix`](../../nix/compilers.nix)).
+Building that toolchain the first time is slow unless it is fetched from a Nix binary cache.
+If you don't need the custom glibc, the Linux-only `.#gcc-plain` and `.#clang-plain`
+give you the stock nixpkgs compilers of the same versions.
+On macOS there is no custom glibc, so `.#gcc` and `.#clang` are already the plain nixpkgs toolchain,
+and the `-plain` variants do not exist.
+
 Use `nix flake show` to see all the available development shells.
 
-Use `nix develop .#no_compiler` to use the compiler from your system.
+Use `nix develop .#no-compiler` to use the compiler from your system.
 
 ### Example Usage
 
 ```bash
-# Use GCC 14
-nix develop .#gcc14
+# Use GCC — same toolchain as CI (custom glibc on Linux)
+nix develop .#gcc
 
-# Use Clang 19
-nix develop .#clang19
+# Use Clang — same toolchain as CI (custom glibc on Linux)
+nix develop .#clang
 
 # Use default for your platform
 nix develop
+
+# Stock nixpkgs GCC/Clang, Linux only — skips the custom-glibc build, but does not match CI
+nix develop .#gcc-plain
+nix develop .#clang-plain
 ```
 
 ### Using a different shell
 
-`nix develop` opens bash by default. If you want to use another shell this could be done by adding `-c` flag. For example:
+`nix develop` opens bash by default. To use another shell, pass it with the `-c` flag — this works with any shell, e.g. `zsh` or `fish`:
 
 ```bash
+# Use zsh
 nix develop -c zsh
+
+# Use fish
+nix develop -c fish
+
+# Use your login shell
+nix develop -c "$SHELL"
 ```
 
-## Building xrpld with Nix
+> [!WARNING]
+> Your shell's interactive startup files (e.g. `config.fish`, `.zshrc`) may prepend other directories — most commonly Homebrew — to `$PATH`, which can shadow the tools provided by the Nix shell. After entering, verify that tools resolve into the Nix store:
+>
+> ```bash
+> command -v cmake   # should print a /nix/store/... path
+> ```
+>
+> If it doesn't, either adjust your shell configuration so it doesn't override `$PATH`, or use [direnv](#automatic-activation-with-direnv) (below), which loads the environment _after_ your shell config and so takes precedence regardless of the shell you use.
+
+## Building xrpld in the Nix shell
 
 Once inside the Nix development shell, follow the standard [build instructions](../../BUILD.md#steps). The Nix shell provides all necessary tools (CMake, Ninja, Conan, etc.).
 
+Coverage builds (`-Dcoverage=ON`) work in the `gcc` shell (and `gcc-plain` on Linux):
+each ships a `gcov` matching its compiler, since Nix's cc-wrapper does not expose one.
+The `clang` shells do not include `llvm-cov`, so use a `gcc` shell for coverage.
+
+## Conan configuration
+
+The shell runs [`conan/init.sh`](../../conan/init.sh) on entry, so
+[Set Up Conan](../../BUILD.md#set-up-conan) is already done for you. It installs
+into the shell's own Conan home: `CONAN_HOME=~/.conan2-nix`.
+
+### Prebuilt packages
+
+On **Linux**, the binaries on the `xrplf` remote are built in this same Nix
+environment — CI runs in Docker images that bundle the dev shell's toolchain (see
+[`nix/docker`](../../nix/docker)) — so `.#gcc` and `.#clang` can reuse them. The
+`-plain` shells do not match that toolchain's glibc, so binaries from the remote
+are not a reliable match there.
+
+On **macOS**, CI builds with Apple Clang, so the remote holds nothing for the Nix
+`clang` toolchain and dependencies are compiled locally. We do not publish
+Nix-built macOS binaries because a Conan package ID records the compiler version
+but not the nixpkgs revision.
+
+To compile everything from source, add `--build '*'` to the `conan install`
+command.
+
 ## Automatic Activation with direnv
 
 [direnv](https://direnv.net/) or [nix-direnv](https://github.com/nix-community/nix-direnv) can automatically activate the Nix development shell when you enter the repository directory.
 
-## Conan and Prebuilt Packages
+This is also the most robust way to use the environment from **any shell** (bash, zsh, fish, …): direnv stays in your current shell and loads the environment _after_ your shell's startup files have run, so the Nix-provided tools take precedence over anything your shell configuration adds to `$PATH`.
 
-Please note that there is no guarantee that binaries from conan cache will work when using nix. If you encounter any errors, please use `--build '*'` to force conan to compile everything from source:
+The repository already ships an `.envrc` at its root that activates the Nix flake development shell, so you don't need to create one. To use it:
 
-```bash
-conan install .. --output-folder . --build '*' --settings build_type=Release
-```
+1. [Install direnv](https://direnv.net/docs/installation.html) and [hook it into your shell](https://direnv.net/docs/hook.html) (bash, zsh, fish, …). Installing [nix-direnv](https://github.com/nix-community/nix-direnv) as well is recommended: it caches the shell so that activation is near-instant after the first run.
+2. Run `direnv allow` once in the repository root. direnv will then load (and reload) the Nix development shell automatically whenever you enter the directory.
+
+> [!NOTE]
+> direnv only caches the `.direnv` directory (already listed in `.gitignore`); no other repository files are affected.
 
 ## Updating `flake.lock` file
 
 To update `flake.lock` to the latest revision use `nix flake update` command.
+
+## Tooling snapshots
+
+The tool versions in each Nix environment are recorded in
+[`nix/check-tools/`](../../nix/check-tools) and verified by CI. If you change the
+environment (bump the CI image tag, update `flake.lock`, or edit the tool list in
+`bin/check-tools.sh`), CI fails until you regenerate and commit the affected
+snapshot — see [`nix/check-tools/README.md`](../../nix/check-tools/README.md).
+
+## Troubleshooting
+
+See [Troubleshooting Nix problems](./nix_troubleshooting.md) for common issues,
+such as `nix develop` failing inside Git worktrees.

docs/build/nix_troubleshooting.md

@@ -0,0 +1,133 @@
+# Troubleshooting Nix problems
+
+Common issues encountered when using the [Nix development shell](./nix.md), and
+how to resolve them.
+
+## `command not found: nix` after a macOS update
+
+If a shell suddenly can't find `nix` at all:
+
+```
+$ nix develop
+zsh: command not found: nix
+```
+
+then Nix is almost certainly still installed — only the shell hook that puts it
+on your `PATH` is gone. Confirm that first:
+
+```bash
+ls -l /nix/var/nix/profiles/default/bin/nix
+```
+
+If that exists, the installation is fine and this is purely a `PATH` problem.
+
+### Why it happens
+
+The installer does not touch your dotfiles. Instead it sources a setup script
+from the Nix store by editing **system-wide** rc files:
+
+| Shell | File the installer edits              |
+| ----- | ------------------------------------- |
+| bash  | `/etc/bashrc`, `/etc/bash.bashrc`     |
+| zsh   | `/etc/zshrc`                          |
+| fish  | `$__fish_sysconf_dir/conf.d/nix.fish` |
+
+macOS manages `/etc/zshrc`, so an OS update can replace it with the vendor copy
+and silently drop the Nix block. `/etc/bashrc` and the fish file usually survive,
+which is why the breakage often shows up in zsh only. You can verify this by
+diffing against the backup the installer left behind:
+
+```bash
+diff /etc/zshrc /etc/zshrc.backup-before-nix
+```
+
+If they are identical, the Nix snippet was wiped. This is upstream issue
+[NixOS/nix#3616](https://github.com/NixOS/nix/issues/3616).
+
+### Fix
+
+To unblock the current shell:
+
+```bash
+. /nix/var/nix/profiles/default/etc/profile.d/nix-daemon.sh
+```
+
+For a permanent fix, add the snippet to your **user** rc file rather than
+restoring `/etc/zshrc` — user dotfiles are not clobbered by OS updates:
+
+```bash
+cat >>~/.zshrc <<'EOF'
+
+# Nix
+if [ -e '/nix/var/nix/profiles/default/etc/profile.d/nix-daemon.sh' ]; then
+  . '/nix/var/nix/profiles/default/etc/profile.d/nix-daemon.sh'
+fi
+# End Nix
+EOF
+```
+
+The scripts guard against double-sourcing via `__ETC_PROFILE_NIX_SOURCED`, so
+this is safe even if a system-wide hook is later restored.
+
+> [!NOTE]
+> `/etc/zshrc` and `~/.zshrc` are only read by **interactive** zsh. If the
+> snippet is present but `zsh -c '…'`, a script, or an IDE terminal still can't
+> find `nix`, that shell is non-interactive — put the snippet in `~/.zshenv`
+> instead.
+
+## Git worktrees
+
+If `nix develop` fails with an error like:
+
+```
+error:
+       … while fetching the input 'git+file:///path/to/rippled'
+
+       error: opening Git repository "/path/to/rippled": unsupported extension name extensions.relativeworktrees (libgit2 error code = 6)
+```
+
+then your Nix is linked against a libgit2 older than **1.9.4**. Git 2.48+ writes
+the `extensions.relativeWorktrees` config entry when a worktree is created with
+relative paths (`git worktree add --relative-paths`, or with
+`worktree.useRelativePaths=true`), and older libgit2 versions refuse to open a
+repository that uses it. Nix uses libgit2 to read the flake, so evaluation
+fails.
+
+> [!IMPORTANT]
+> This entry is written to the **shared** repository config, so once any
+> relative worktree exists, `nix develop` fails in the main checkout too — not
+> just inside the worktree.
+
+### Workarounds
+
+These work today, with any Nix version:
+
+- bypass libgit2 with a `path:` flakeref: `nix develop "path:$PWD"`
+  (note: this copies the working tree to the store and ignores `.gitignore`); or
+- create worktrees with absolute paths (omit `--relative-paths`); or
+- clear the extension if you don't need relative worktrees:
+  `git config --unset extensions.relativeWorktrees`.
+
+### Permanent fix
+
+The fix is in [libgit2 1.9.4](https://github.com/libgit2/libgit2/releases/tag/v1.9.4),
+so the real solution is a Nix that links against libgit2 `1.9.4` or newer. Check
+which version yours links against:
+
+```bash
+nix-store -qR "$(readlink -f "$(command -v nix)")" | grep libgit2
+```
+
+> [!WARNING]
+> `nix upgrade-nix` does **not** help yet. It installs the build from the
+> official [`nix-fallback-paths`](https://github.com/NixOS/nixpkgs/blob/master/nixos/modules/installer/tools/nix-fallback-paths.nix),
+> which is still linked against libgit2 `1.9.2` — there is no new upstream Nix
+> release with the fix. (On some systems that build is even the exact store path
+> you already have, making the upgrade a no-op.)
+
+nixpkgs has already rebuilt Nix against the fixed libgit2 (e.g. `nix-2.34.7+1`),
+so the cleanest path is to reinstall Nix using your usual installation method
+once it picks up that rebuild, then re-run the `grep libgit2` check above to
+confirm it reports `1.9.4` or newer.
+
+Until then, prefer the workarounds above.

docs/dust-mechanism.md

@@ -0,0 +1,176 @@
+# Trust-line dust mechanism
+
+Companion document to [`xrpl::DustSplit`](../include/xrpl/ledger/helpers/TokenHelpers.h)
+and the [`xrpl::vault_dust::`](../include/xrpl/ledger/helpers/VaultHelpers.h)
+Vault adopter. Introduced by `featureLendingProtocolV1_1`.
+
+## Why sfDust
+
+An IOU trust line stores its balance in `sfBalance`, an `STAmount`.
+`STAmount` carries ~16 significant digits; `Number` (used throughout
+protocol accounting) carries 19. When a caller mints or debits a value
+that is finer than what `sfBalance` can represent — typical for
+cash-basis Vault operations near a scale-refining decade boundary — the
+sub-quantum remainder is dropped by rounding. Over many operations the
+loss accumulates and drives receivables and available-cash counters
+apart.
+
+`sfDust` is a per-trust-line 19-digit `STNumber` field that holds that
+sub-quantum remainder. The trust line's true holding is the
+**extended balance** `sfBalance + sfDust`. `sfDust` is intentionally
+declared without the `kSmdNeedsAsset` metadata flag: `associateAsset`
+must not truncate it to `sfBalance`'s precision, since its whole
+purpose is to carry value below that precision.
+
+Pre-amendment `sfDust` is `SoeDefault(0)`. The ledger encoding of an
+`ltRIPPLE_STATE` entry is byte-identical to before the amendment on any
+line whose `sfDust` is zero, so activation is a strict extension.
+
+## Two-legged trust-line touch
+
+A `A -> B` IOU payment where `I` issues touches at most two trust
+lines:
+
+- the sender's line `RIPPLE_STATE{A, I}`;
+- the receiver's line `RIPPLE_STATE{B, I}`.
+
+`A` and `B` are the non-issuer parties on their respective lines; `I`
+holds no line of its own for its own currency. Each non-issuer party
+can independently opt into dust semantics on their OWN line by
+attaching a per-leg `DustSplit::LegPolicy` — `sender` for the debit
+leg, `receiver` for the credit leg. A leg without a sub-policy runs the
+classic pre-dust code path byte-identically.
+
+## Modes
+
+`DustSplit::LegPolicy::Mode::Override`
+: Trust-line layer keeps `sfBalance` representable at `overrideScale`
+and parks any sub-quantum remainder in `sfDust`. Previously deferred
+`sfDust` is automatically promoted when the combined `sfDust +
+   credit` clears a whole-quantum boundary — no separate "renormalise"
+step. Callers supply `overrideScale` from their own accounting
+(e.g. the Vault's posterior scale). Bounded scale drift up to one
+decade may linger until the next operation that refines the scale.
+
+`DustSplit::LegPolicy::Mode::Drain` (sender-leg only)
+: Folds ALL of `sfDust` on the sender's line into the outgoing
+transfer, then zeroes `sfDust`. Used for terminal removals where
+the sender is winding down. There is no receiver-side counterpart
+because a receiver has no reservoir to drain.
+
+## Reporting sign convention
+
+Out-fields (`balanceDelta`, `dustDelta`) on `LegPolicy` are reported
+FROM THAT LEG'S NON-ISSUER PARTY'S PERSPECTIVE — party-positive:
+
+- `sender` leg reports SENDER-POSITIVE deltas. A normal send makes the
+  sender's `balanceDelta` negative; a Drain reports `dustDelta ==
+-sfDust_before`.
+- `receiver` leg reports RECEIVER-POSITIVE deltas. A normal receive
+  makes the receiver's `balanceDelta` positive.
+
+This lets a consumer reconcile its own bookkeeping symmetrically:
+reads from `sender->balanceDelta` on a withdrawal/clawback line up in
+sign with reads from `receiver->balanceDelta` on a deposit, without a
+sign flip.
+
+## Contract asserts (debug)
+
+- Drain on the receiver leg is a caller error.
+- Attaching a policy to the issuer side of a direct payment (where one
+  party IS the issuer) is a caller error — the policy must correspond
+  to the non-issuer party's leg.
+- Any non-empty `DustSplit` requires `featureLendingProtocolV1_1`
+  enabled; a policy under an older rules set falls back to `nullptr`
+  and asserts in debug.
+
+## Adding a new consumer
+
+Vault is the sole consumer today (`xrpl::vault_dust::`). Adding a
+sibling adopter (AMM, LoanBroker, …) is purely additive:
+
+1. Add an eligibility gate in a new sibling namespace, analogous to
+   `xrpl::vault_dust::useVaultDust`.
+2. Construct a `DustSplit` in that consumer's transactor helpers,
+   using the scale implied by that consumer's own accounting.
+3. Reconcile the consumer's bookkeeping using the reported deltas.
+
+The trust-line layer needs no per-consumer awareness. Do NOT extend
+`xrpl::vault_dust::` to serve non-Vault consumers.
+
+## Amendment-gate policy
+
+Every code path that reads or writes `sfDust` enforces
+`rules().enabled(featureLendingProtocolV1_1)`:
+
+- write side: `directSendNoFeeIOU` (this is the canonical anchor);
+- read side: `creditBalanceExact`;
+- deletion guard: `removeEmptyHolding`;
+- consumer eligibility: `vault_dust::useVaultDust`.
+
+In normal operation the gate is redundant — the transactor-level
+eligibility predicates already imply the amendment is on — but a
+hypothetical replay/testing path that ever presented a dust-aware
+request under a pre-amendment `rules()` must NOT touch `sfDust`: the
+field would then be neither `SoeDefault(0)` as expected pre-amendment
+nor part of the ledger's canonical encoding. The gate asserts in
+debug and falls back to the pre-dust code path in release.
+
+## `ValidVault` invariant sign-handling
+
+`sfDust` is stored in the trust line's low-account convention (same as
+`sfBalance`) but the vault-facing invariant needs deltas expressed
+from the counterparty's own perspective. The transformation happens in
+`src/libxrpl/tx/invariants/VaultInvariant.cpp` in two symmetric
+steps — get either step wrong and the invariant either accepts an
+underflow it should reject, or spuriously rejects a valid
+scale-refining move.
+
+1. `ValidVault::visitEntry` accumulates
+   `dustDelta = Number{before} - Number{after}` in low-account
+   convention, matching how `balanceDelta.delta` is accumulated. The
+   convention that both dustDelta and delta share the same low/high
+   orientation is load-bearing — the subsequent sign flip
+   (`balanceDelta.dustDelta *= sign`) leaves the pair oriented as
+   "after − before".
+
+2. `ValidVault::deltaAssets` looks up a trust line for a given
+   `AccountID id`. If `id` is the high account, the low-account
+   convention is inverted with `result->delta = -result->delta` and
+   `result->dustDelta = -result->dustDelta`. This has to be done in
+   lockstep on BOTH fields — flipping only one field would silently
+   invert one component of the extended-balance delta and produce
+   over- or under-reporting in the cash-flow parity check.
+
+The withdrawal cash-flow parity check in `finalize` for
+`ttVAULT_WITHDRAW` compares `extendedPseudoDelta = delta + dustDelta`
+against `extendedDestinationDelta = delta + dustDelta`. Both operands
+must be constructed from the same sign-corrected `DeltaInfo`, which
+is why the sign flip in `deltaAssets` covers both fields together.
+
+If a future contributor adds a new field-typed delta or a new
+sign-flipping helper, replicate this two-field lockstep. The end-to-
+end regression coverage for this convention lives in
+`VaultRoundingTrustlineDust_test::testNonTerminalWithdrawAfterDust`
+and `testSenderLegOverrideNonTerminalPromotes`.
+
+## Related tests
+
+- `src/test/app/lending/VaultRoundingTrustlineDust_test.cpp`
+  covers the end-to-end dust behaviour, including the extended-balance
+  invariant path, sender-leg Override reporting on non-terminal
+  withdraw, and end-to-end Drain via defaulted-loan terminal
+  withdrawal. Also pins the deletion guard both directions
+  (`testVaultDeleteRequiresZeroDust` +
+  `testRemoveEmptyHoldingBlockedByDust`), the nullptr-policy dust
+  preservation contract (`testNullptrPathPreservesExistingDust`),
+  and the golden-byte SoeDefault ledger-encoding compatibility
+  (`testSfDustGoldenByteCompat`).
+- `src/test/app/lending/VaultRounding_test.cpp::testBoundedDust`
+  widens its own test-oracle bound (there is no such bound enforced
+  by `ValidVault` or anywhere else at the ledger level) from one
+  quantum to ten, to allow for the bounded decade-boundary drift
+  documented above.
+- `src/test/app/VaultHelpers_test.cpp::testMoveVaultAssetsWithDust`
+  pins the multi-destination sender-leg-Override + receivers-dust-
+  unaware contract.

docs/sample_chart.doc

@@ -1,24 +0,0 @@
-/*!
-    \page somestatechart Example state diagram
-
-    \startuml SomeState "my state diagram"
-    scale 600 width
-
-    [*] -> State1
-    State1 --> State2 : Succeeded
-    State1 --> [*] : Aborted
-    State2 --> State3 : Succeeded
-    State2 --> [*] : Aborted
-    state State3 {
-      state "Accumulate Enough Data\nLong State Name" as long1
-      long1 : Just a test
-      [*] --> long1
-      long1 --> long1 : New Data
-      long1 --> ProcessData : Enough Data
-    }
-    State3 --> State3 : Failed
-    State3 --> [*] : Succeeded / Save Result
-    State3 --> [*] : Aborted
-
-    \enduml
-*/

flake.lock

@@ -2,17 +2,18 @@
   "nodes": {
     "nixpkgs": {
       "locked": {
-        "lastModified": 1777954456,
-        "narHash": "sha256-hGdgeU2Nk87RAuZyYjyDjFL6LK7dAZN5RE9+hrDTkDU=",
+        "lastModified": 1781173989,
+        "narHash": "sha256-fnzKKPvS+oieI/pTzotA5tkoM47EB1NpaBcgk4R97hE=",
         "owner": "NixOS",
         "repo": "nixpkgs",
-        "rev": "549bd84d6279f9852cae6225e372cc67fb91a4c1",
+        "rev": "8c91a71d13451abc40eb9dae8910f972f979852f",
         "type": "github"
       },
       "original": {
-        "id": "nixpkgs",
-        "ref": "nixos-unstable",
-        "type": "indirect"
+        "owner": "NixOS",
+        "ref": "nixpkgs-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
       }
     },
     "nixpkgs-custom-glibc": {
@@ -35,7 +36,28 @@
     "root": {
       "inputs": {
         "nixpkgs": "nixpkgs",
-        "nixpkgs-custom-glibc": "nixpkgs-custom-glibc"
+        "nixpkgs-custom-glibc": "nixpkgs-custom-glibc",
+        "rust-overlay": "rust-overlay"
+      }
+    },
+    "rust-overlay": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1784611586,
+        "narHash": "sha256-OfqgY+0hp/zseZB7uyH0U8kIDPS4scZZCyAurEplvG0=",
+        "owner": "oxalica",
+        "repo": "rust-overlay",
+        "rev": "14f58845249f3552a89b07772626b8d3c632fa86",
+        "type": "github"
+      },
+      "original": {
+        "owner": "oxalica",
+        "repo": "rust-overlay",
+        "type": "github"
       }
     }
   },

flake.nix

@@ -1,7 +1,7 @@
 {
   description = "Nix related things for xrpld";
   inputs = {
-    nixpkgs.url = "nixpkgs/nixos-unstable";
+    nixpkgs.url = "github:NixOS/nixpkgs/nixpkgs-unstable";
     # nixpkgs snapshot (2020-06-30) that shipped glibc 2.31 as the primary
     # version — matches the system libc on Ubuntu 20.04 LTS. Imported
     # manually (flake = false) because this revision predates nixpkgs'
@@ -10,12 +10,25 @@
       url = "github:NixOS/nixpkgs/9cd98386a38891d1074fc18036b842dc4416f562";
       flake = false;
     };
+    # Pinned Rust toolchains, delivered from the Nix store. Lets the Nix CI
+    # image and dev shell honour the single `rust-toolchain.toml` pin (shared
+    # with the rustup-based non-Nix runners) while staying hermetic — the
+    # toolchain lands in the image's Nix closure and is locked by flake.lock.
+    rust-overlay = {
+      url = "github:oxalica/rust-overlay";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
   };
 
   outputs =
-    { nixpkgs, nixpkgs-custom-glibc, ... }:
+    {
+      nixpkgs,
+      nixpkgs-custom-glibc,
+      rust-overlay,
+      ...
+    }:
     let
-      forEachSystem = import ./nix/utils.nix { inherit nixpkgs nixpkgs-custom-glibc; };
+      forEachSystem = import ./nix/utils.nix { inherit nixpkgs nixpkgs-custom-glibc rust-overlay; };
     in
     {
       devShells = forEachSystem (import ./nix/devshell.nix);