feat: Record Batch inner results for validated ledgers and return them from tx

Co-authored-by: Bart <11445373+bthomee@users.noreply.github.com>

.codecov.yml

@@ -1,10 +1,32 @@
 codecov:
   require_ci_to_pass: true
+  # The C++ and Rust uploads land minutes apart; without this gate Codecov
+  # publishes a near-zero total from whichever one arrives first.
+  notify:
+    after_n_builds: 2
+    wait_for_ci: true
 
 comment:
   behavior: default
   layout: reach,diff,flags,tree,reach
-  show_carryforward_flags: false
+  show_carryforward_flags: true
+  after_n_builds: 2
+
+# C++ and Rust coverage upload from independent workflows under the `cpp` and
+# `rust` flags; carryforward keeps one language's total when only the other reran.
+flag_management:
+  default_rules:
+    carryforward: true
+  individual_flags:
+    - name: cpp
+      carryforward: true
+      paths:
+        - include/
+        - src/
+    - name: rust
+      carryforward: true
+      paths:
+        - crates/
 
 coverage:
   range: "70..85"

.cspell.config.yaml

@@ -7,6 +7,7 @@ ignorePaths:
   - cmake/**
   - LICENSE.md
   - .clang-tidy
+  - nix/check-tools/*.txt # generated, and full of Nix store hashes
 language: en
 allowCompoundWords: true # TODO (#6334)
 ignoreRandomStrings: true
@@ -68,6 +69,7 @@ words:
   - Buildx
   - canonicality
   - canonicalised
+  - cctools
   - changespq
   - checkme
   - choco
@@ -109,6 +111,7 @@ words:
   - disablerepo
   - distro
   - doxyfile
+  - dsymutil
   - dxrpl
   - elgamal
   - enabled
@@ -167,6 +170,7 @@ words:
   - LOCALGOOD
   - logwstream
   - Lombrozo
+  - lresolv
   - lseq
   - lsmf
   - ltype
@@ -220,6 +224,7 @@ words:
   - Nyffenegger
   - onlatest
   - ostr
+  - otool
   - oxalica
   - pargs
   - partitioner
@@ -249,11 +254,15 @@ words:
   - Raphson
   - rcflags
   - replayer
+  - repodata
+  - repomd
   - rerandomize
   - rerandomization
   - rerandomized
   - rerandomizes
   - rerere
+  - retargeted
+  - retargets
   - retriable
   - RIPD
   - ripdtop
@@ -289,6 +298,7 @@ words:
   - sles
   - soci
   - socidb
+  - Sonatype
   - sponsee
   - sponsees
   - SRPMS
@@ -308,6 +318,7 @@ words:
   - summands
   - superpeer
   - superpeers
+  - Swatinem
   - takergets
   - takerpays
   - ters
@@ -363,12 +374,16 @@ words:
   - wthread
   - xbridge
   - xchain
+  - xcrun
   - ximinez
   - XMACRO
+  - xored
   - xrpkuwait
   - xrpl
   - xrpld
   - xrplf
   - xxhash
   - xxhasher
+  - zstdio
   - CGNAT
+  - ungated

.envrc

@@ -1,3 +1,10 @@
 watch_file nix/*.nix
 
+# Pinned Rust toolchain, read by nix/packages.nix via fromRustupToolchainFile.
+watch_file rust-toolchain.toml
+
+# The dev shell derivation includes all of conan/ (see nix/devshell.nix), so any
+# change in there has to invalidate direnv's cached environment.
+watch_dir conan
+
 use flake

.github/actions/cargo-cache/action.yml

@@ -0,0 +1,39 @@
+name: Use cargo artifacts cache
+description: >
+  Cache the cargo build artifacts with rust-cache. Never caches ~/.cargo/bin:
+  when saving the cache, rust-cache deletes all binaries that were already
+  present there, which on persistent self-hosted runners wipes the tools
+  installed by prepare-runner. Harmless on ephemeral runners, but kept
+  consistent everywhere.
+
+inputs:
+  workspaces:
+    description: "Workspaces to cache, as 'workspace -> target' lines."
+    required: false
+    default: crates
+  key:
+    description: "Additional part of the cache key."
+    required: false
+    default: ""
+  cache-directories:
+    description: "Additional non-workspace directories to cache."
+    required: false
+    default: ""
+  save-if:
+    description: >
+      Condition for saving the cache after the job. Defaults to save only from develop branch
+    required: false
+    default: ${{ github.ref == 'refs/heads/develop' }}
+
+runs:
+  using: composite
+
+  steps:
+    - name: Use cargo artifacts cache
+      uses: Swatinem/rust-cache@6323deb102c322ba6fcbdcafc7e3dddab59af2b6 # v2.9.2
+      with:
+        cache-bin: "false"
+        cache-directories: ${{ inputs.cache-directories }}
+        key: ${{ inputs.key }}
+        save-if: ${{ inputs.save-if }}
+        workspaces: ${{ inputs.workspaces }}

.github/actions/generate-version/action.yml

@@ -1,44 +0,0 @@
-name: Generate build version number
-description: "Generate build version number."
-
-outputs:
-  version:
-    description: "The generated build version number."
-    value: ${{ steps.version.outputs.version }}
-
-runs:
-  using: composite
-  steps:
-    # When a tag is pushed, the version is used as-is.
-    - name: Generate version for tag event
-      if: ${{ startsWith(github.ref, 'refs/tags/') }}
-      shell: bash
-      env:
-        VERSION: ${{ github.ref_name }}
-      run: echo "VERSION=${VERSION}" >>"${GITHUB_ENV}"
-
-    # When a tag is not pushed, then the version (e.g. 1.2.3-b0) is extracted
-    # from the BuildInfo.cpp file and the shortened commit hash appended to it.
-    # We use a plus sign instead of a hyphen because Conan recipe versions do
-    # not support two hyphens.
-    - name: Generate version for non-tag event
-      if: ${{ !startsWith(github.ref, 'refs/tags/') }}
-      shell: bash
-      run: |
-        echo 'Extracting version from BuildInfo.cpp.'
-        VERSION="$(cat src/libxrpl/protocol/BuildInfo.cpp | grep "versionString =" | awk -F '"' '{print $2}')"
-        if [[ -z "${VERSION}" ]]; then
-            echo 'Unable to extract version from BuildInfo.cpp.'
-            exit 1
-        fi
-
-        echo 'Appending shortened commit hash to version.'
-        SHA='${{ github.sha }}'
-        VERSION="${VERSION}+${SHA:0:7}"
-
-        echo "VERSION=${VERSION}" >>"${GITHUB_ENV}"
-
-    - name: Output version
-      id: version
-      shell: bash
-      run: echo "version=${VERSION}" >>"${GITHUB_OUTPUT}"

.github/actions/release-info/action.yml

@@ -0,0 +1,44 @@
+name: Release info
+description: "Derive the version, release channel and package release number for this build."
+
+outputs:
+  version:
+    description: "The build version number."
+    value: ${{ steps.version.outputs.version }}
+  channel:
+    description: "The release channel this build belongs to."
+    value: ${{ steps.release_info.outputs.channel }}
+  pkg_release:
+    description: "The package release number: 1 for a tag, <run number>.<commit date>git<short commit hash> otherwise."
+    value: ${{ steps.release_info.outputs.pkg_release }}
+
+runs:
+  using: composite
+  steps:
+    # A tag names its own version. Anything else takes it from BuildInfo.cpp and
+    # appends the commit hash as build metadata, joined with a plus sign because a
+    # Conan version cannot contain two hyphens.
+    - name: Determine version
+      id: version
+      shell: bash
+      env:
+        IS_TAG: ${{ startsWith(github.ref, 'refs/tags/') }}
+        REF_NAME: ${{ github.ref_name }}
+        SHA: ${{ github.sha }}
+      run: |
+        if [[ "${IS_TAG}" == "true" ]]; then
+            version="${REF_NAME}"
+        else
+            version="$(awk -F'"' '/versionString =/ { print $2 }' src/libxrpl/protocol/BuildInfo.cpp)"
+            if [[ -z "${version}" ]]; then
+                echo "Unable to read versionString from BuildInfo.cpp." >&2
+                exit 1
+            fi
+            version="${version}+${SHA:0:7}"
+        fi
+
+        echo "version=${version}" | tee -a "${GITHUB_OUTPUT}"
+
+    - name: Determine release channel and package release
+      id: release_info
+      uses: XRPLF/actions/release-info@7cc0e4a8d9d0b838f92c48d312856b190341bbba

.github/actions/setup-nix-env/action.yml

@@ -0,0 +1,69 @@
+name: Setup Nix environment
+description: "Build the flake's CI environment and put its tools on PATH."
+
+# The environment from nix/ci-env.nix, the same one the Linux CI images bake in
+# (see nix/docker). Exported onto PATH rather than entered with `nix develop`:
+# the composite actions below run plain `bash` and would escape a dev shell.
+
+runs:
+  using: composite
+
+  steps:
+    - name: Build the CI environment
+      id: build
+      shell: bash
+      env:
+        # --out-link doubles as a GC root for the length of the job.
+        OUT_LINK: ${{ runner.temp }}/xrpld-ci-env
+      run: |
+        # --extra-experimental-features: flakes may not be on in the runner's nix.conf.
+        nix --extra-experimental-features "nix-command flakes" \
+            build .#default --out-link "${OUT_LINK}" --print-build-logs
+        echo "path=$(readlink -f "${OUT_LINK}")" >>"${GITHUB_OUTPUT}"
+
+    - name: Export the environment
+      shell: bash
+      env:
+        ENV_PATH: ${{ steps.build.outputs.path }}
+      run: |
+        echo "${ENV_PATH}/bin" >>"${GITHUB_PATH}"
+
+        # Already KEY=VALUE per line. See `darwinEnv` in nix/ci-env.nix.
+        ENV_FILE="${ENV_PATH}/share/xrpld-ci-env/env"
+        if [ -f "${ENV_FILE}" ]; then
+            cat "${ENV_FILE}" >>"${GITHUB_ENV}"
+        fi
+
+        # XrplSanity.cmake otherwise rejects a Nix compiler as one that leaked.
+        echo "XRPL_DEVSHELL=ci-env" >>"${GITHUB_ENV}"
+
+        # Unlike the Linux nix images, macOS needs no SSL_CERT_FILE: it has its
+        # own trust store, and pinning would break TLS to hosts relying on it.
+
+        # Workspace-local, so `cleanup-workspace` clears it, but not the
+        # `.conan2` prepare-runner hands the system toolchain: that Conan is a
+        # different version, and the two would migrate each other's cache.
+        echo "CONAN_HOME=${{ github.workspace }}/.conan2-nix" >>"${GITHUB_ENV}"
+
+    # Config, profiles and remote, exactly as the dev shell sets them up on
+    # entry; the `setup-conan` action is skipped for this toolchain.
+    - name: Setup Conan
+      shell: bash
+      run: ./conan/init.sh
+
+    # `Check tools` runs later but swallows failures; a bad export would just
+    # build with the system toolchain.
+    - name: Verify the toolchain resolves into the Nix store
+      shell: bash
+      run: |
+        for tool in clang clang++ cmake ninja conan; do
+            path="$(command -v "${tool}" || true)"
+            echo "${tool} -> ${path:-<not found>}"
+            case "${path}" in
+                /nix/store/*) ;;
+                *)
+                    echo "::error::${tool} does not resolve into the Nix store"
+                    exit 1
+                    ;;
+            esac
+        done

.github/dependabot.yml

@@ -4,7 +4,8 @@ updates:
     directories:
       - /
       - .github/actions/build-deps/
-      - .github/actions/generate-version/
+      - .github/actions/cargo-cache/
+      - .github/actions/release-info/
       - .github/actions/set-compiler-env/
       - .github/actions/setup-conan/
     schedule:
@@ -19,3 +20,19 @@ updates:
       github-actions:
         patterns:
           - "*"
+
+  - package-ecosystem: cargo
+    directory: /crates
+    schedule:
+      interval: weekly
+      day: monday
+      time: "04:00"
+      timezone: Etc/GMT
+    commit-message:
+      prefix: "chore: [DEPENDABOT] "
+    target-branch: develop
+    open-pull-requests-limit: 10
+    groups:
+      rust-dependencies:
+        patterns:
+          - "*"

.github/scripts/rename/binary.sh

@@ -49,7 +49,7 @@ ${SED_COMMAND} -i -E 's@ripple/xrpld@XRPLF/rippled@g' BUILD.md
 ${SED_COMMAND} -i -E 's@XRPLF/xrpld@XRPLF/rippled@g' BUILD.md
 ${SED_COMMAND} -i -E 's@xrpld \(`xrpld`\)@xrpld@g' BUILD.md
 ${SED_COMMAND} -i -E 's@XRPLF/xrpld@XRPLF/rippled@g' CONTRIBUTING.md
-${SED_COMMAND} -i -E 's@XRPLF/xrpld@XRPLF/rippled@g' docs/build/install.md
+${SED_COMMAND} -i -E 's@XRPLF/xrpld@XRPLF/rippled@g' docs/install.md
 
 popd
 echo "Processing complete."

.github/scripts/rename/docs.sh

@@ -77,8 +77,8 @@ ${SED_COMMAND} -i 's/Ripple integrators/XRPL developers/' README.md
 ${SED_COMMAND} -i 's/sanitizer-configuration-for-rippled/sanitizer-configuration-for-xrpld/' docs/build/sanitizers.md
 ${SED_COMMAND} -i 's/rippled/xrpld/g' .github/scripts/levelization/README.md
 ${SED_COMMAND} -i 's/rippled/xrpld/g' .github/scripts/strategy-matrix/generate.py
-${SED_COMMAND} -i 's@/rippled@/xrpld@g' docs/build/install.md
-${SED_COMMAND} -i 's@github.com/XRPLF/xrpld@github.com/XRPLF/rippled@g' docs/build/install.md
+${SED_COMMAND} -i 's@/rippled@/xrpld@g' docs/install.md
+${SED_COMMAND} -i 's@github.com/XRPLF/xrpld@github.com/XRPLF/rippled@g' docs/install.md
 ${SED_COMMAND} -i 's/rippled/xrpld/g' docs/Doxyfile
 ${SED_COMMAND} -i 's/ripple_basics/basics/' include/xrpl/basics/CountedObject.h
 ${SED_COMMAND} -i 's/<ripple/<xrpl/' include/xrpl/protocol/AccountID.h

.github/scripts/strategy-matrix/generate.py

@@ -7,7 +7,13 @@ from pathlib import Path
 
 THIS_DIR = Path(__file__).parent.resolve()
 
-_BASE_CMAKE_ARGS = ["-Dtests=ON", "-Dwerr=ON", "-Dxrpld=ON", "-Dwextra=ON"]
+_BASE_CMAKE_ARGS = [
+    "-Dtests=ON",
+    "-Dwerr=ON",
+    "-Dxrpld=ON",
+    "-Dwextra=ON",
+    "-Drust=ON",
+]
 
 # Maps sanitizer names (as used in cmake) to short config-name suffixes.
 _SANITIZER_SUFFIX: dict[str, str] = {
@@ -17,6 +23,19 @@ _SANITIZER_SUFFIX: dict[str, str] = {
 }
 
 
+def config_name(
+    distro: str,
+    compiler: str,
+    build_type: str,
+    arch: str,
+    suffix: str = "",
+    sanitizer: str = "",
+) -> str:
+    """Name a config. Its artifacts are named after it, so packaging reuses this."""
+    parts = [s for s in [suffix, _SANITIZER_SUFFIX.get(sanitizer, "")] if s]
+    return "-".join([f"{distro}-{compiler}-{build_type.lower()}-{arch}", *parts])
+
+
 def get_cmake_args(build_type: str, extra_args: str) -> str:
     """Get the full list of CMake arguments for a config."""
     args = _BASE_CMAKE_ARGS.copy()
@@ -31,17 +50,27 @@ def get_cmake_args(build_type: str, extra_args: str) -> str:
 
 
 # Every config must declare 'minimal'. Minimal configs form the reduced matrix
-# built for pull requests by default; the full matrix adds the rest. Packaging
-# configs declare it too, but packaging is gated in the workflow, not by it.
+# built for pull requests by default; the full matrix adds the rest.
 #
-# Configs may also opt into 'benchmark' to smoke-run the benchmarks. Note that
-# the flag applies to every entry a config expands into, so only set it on
-# configs that expand to a single combination.
+# Configs may also opt into 'benchmark' to smoke-run the benchmarks, or carry a
+# 'package' map to be packaged as well. Note that either applies to every entry
+# a config expands into, so only set them on configs that expand to a single
+# combination.
+
+
+@dataclasses.dataclass
+class PackageConfig:
+    """The 'package' map of a config whose binaries are also packaged."""
+
+    type: str  # "deb" or "rpm"; has to match what the image provides
+    # The packaging container image: a vanilla distro image, not the nix image
+    # the config itself builds in.
+    image: str
 
 
 @dataclasses.dataclass
 class LinuxConfig:
-    """One entry in linux.json's 'configs' or 'package_configs' arrays."""
+    """One entry in a linux.json 'configs' array."""
 
     compiler: list[str]
     build_type: list[str]
@@ -51,7 +80,11 @@ class LinuxConfig:
     sanitizers: list[str] = dataclasses.field(default_factory=list)
     suffix: str = ""
     extra_cmake_args: str = ""
-    image: str = ""  # only used by package_configs entries
+    package: PackageConfig | None = None  # set to also package this config
+
+    def __post_init__(self) -> None:
+        if isinstance(self.package, dict):
+            self.package = PackageConfig(**self.package)
 
 
 @dataclasses.dataclass
@@ -60,22 +93,16 @@ class LinuxFile:
 
     image_tag: str
     configs: dict[str, list[LinuxConfig]]  # distro → configs
-    package_configs: dict[str, list[LinuxConfig]]  # distro → packaging configs
 
     @classmethod
     def load(cls, path: Path) -> "LinuxFile":
         data = json.loads(path.read_text())
-
-        def parse(section: dict) -> dict[str, list[LinuxConfig]]:
-            return {
-                distro: [LinuxConfig(**c) for c in cfgs]
-                for distro, cfgs in section.items()
-            }
-
         return cls(
             image_tag=data["image_tag"],
-            configs=parse(data["configs"]),
-            package_configs=parse(data.get("package_configs", {})),
+            configs={
+                distro: [LinuxConfig(**c) for c in cfgs]
+                for distro, cfgs in data["configs"].items()
+            },
         )
 
 
@@ -88,6 +115,9 @@ class PlatformConfig:
     build_only: bool = False  # if true, skip tests (e.g. macos/Windows Debug)
     benchmark: bool = False  # if true, smoke-run the benchmarks after testing
     extra_cmake_args: str = ""
+    # "" is the runner's system compiler, "nix" the flake's CI environment.
+    # macOS only: Linux always builds in a Nix image, Windows has no Nix.
+    toolchain: str = ""
 
     def __post_init__(self) -> None:
         if isinstance(self.build_type, str):
@@ -137,6 +167,7 @@ class MatrixEntry:
     sanitizers: str
     image: str = ""  # container image; empty for macOS/Windows (runs natively)
     compiler: str = ""  # compiler name ("gcc" or "clang"); empty for macOS/Windows
+    toolchain: str = ""  # "nix" for the flake's CI environment; see PlatformConfig
 
 
 @dataclasses.dataclass
@@ -146,7 +177,7 @@ class PackagingEntry:
     xrpld_artifact_name: str
     validator_keys_artifact_name: str
     image: str
-    distro: str  # e.g. "debian" or "rhel"; drives package-format-specific steps
+    package_type: str  # "deb" or "rpm"; drives the format-specific steps
 
 
 # ---------------------------------------------------------------------------
@@ -187,13 +218,9 @@ def expand_linux_matrix(linux: LinuxFile, minimal: bool) -> list[MatrixEntry]:
                 effective_sanitizers,
                 effective_archs.items(),
             ):
-                name = f"{distro}-{compiler}-{build_type.lower()}-{arch}"
-                suffix_parts = [
-                    s for s in [cfg.suffix, _SANITIZER_SUFFIX.get(sanitizer, "")] if s
-                ]
-                if suffix_parts:
-                    name += "-" + "-".join(suffix_parts)
-
+                name = config_name(
+                    distro, compiler, build_type, arch, cfg.suffix, sanitizer
+                )
                 entries.append(
                     MatrixEntry(
                         config_name=name,
@@ -213,27 +240,33 @@ def expand_linux_matrix(linux: LinuxFile, minimal: bool) -> list[MatrixEntry]:
 
 
 def expand_linux_packaging(linux: LinuxFile) -> list[PackagingEntry]:
-    """Generate the packaging matrix from a LinuxFile's package_configs section.
+    """Generate the packaging matrix from the configs that carry a 'package' map.
 
-    Packaging uses vanilla distro images (debian:bookworm, ubi9, …) instead of
-    the nix-based build images, because deb/rpm tooling (debhelper, rpm-build)
-    is taken from the distro's archive rather than from nixpkgs. Each config
-    entry carries its own 'image'.
+    Packaging consumes the binaries that config's build job uploaded, so the
+    artifact names come from the same config name, and a packaged config is one
+    that passes -Dvalidator_keys=ON.
 
-    The artifact names must match what the build job uploads: one artifact per
-    binary, each named after the build config.
+    Packaging itself runs in vanilla distro images (debian:trixie, almalinux:10)
+    instead of the nix-based build images, because deb/rpm tooling (debhelper,
+    rpm-build) is taken from the distro's archive rather than from nixpkgs.
     """
     entries = []
-    for distro, configs in linux.package_configs.items():
+    for distro, configs in linux.configs.items():
         for cfg in configs:
-            for compiler, build_type in itertools.product(cfg.compiler, cfg.build_type):
-                config_name = f"{distro}-{compiler}-{build_type.lower()}-amd64"
+            if cfg.package is None:
+                continue
+            for compiler, build_type, arch in itertools.product(
+                cfg.compiler, cfg.build_type, cfg.arch
+            ):
+                # The packaging workflow hardcodes an amd64 runner.
+                assert arch == "amd64", f"cannot package {distro} on {arch}"
+                name = config_name(distro, compiler, build_type, arch, cfg.suffix)
                 entries.append(
                     PackagingEntry(
-                        xrpld_artifact_name=f"xrpld-{config_name}",
-                        validator_keys_artifact_name=f"validator-keys-{config_name}",
-                        image=cfg.image,
-                        distro=distro,
+                        xrpld_artifact_name=f"xrpld-{name}",
+                        validator_keys_artifact_name=f"validator-keys-{name}",
+                        image=cfg.package.image,
+                        package_type=cfg.package.type,
                     )
                 )
 
@@ -253,9 +286,12 @@ def expand_platform_matrix(pf: PlatformFile, minimal: bool) -> list[MatrixEntry]
         if minimal and not cfg.minimal:
             continue
         for build_type in cfg.build_type:
+            name = f"{platform_name}-{arch}-{build_type.lower()}"
+            if cfg.toolchain:
+                name += f"-{cfg.toolchain}"
             entries.append(
                 MatrixEntry(
-                    config_name=f"{platform_name}-{arch}-{build_type.lower()}",
+                    config_name=name,
                     cmake_args=get_cmake_args(build_type, cfg.extra_cmake_args),
                     cmake_target="install" if is_windows else "all",
                     build_only=cfg.build_only,
@@ -263,6 +299,7 @@ def expand_platform_matrix(pf: PlatformFile, minimal: bool) -> list[MatrixEntry]
                     build_type=build_type,
                     architecture=Architecture(platform=pf.platform, runner=pf.runner),
                     sanitizers="",
+                    toolchain=cfg.toolchain,
                 )
             )
     return entries

.github/scripts/strategy-matrix/linux.json

@@ -1,5 +1,5 @@
 {
-  "image_tag": "sha-fecfc0c",
+  "image_tag": "sha-473fe44",
   "configs": {
     "ubuntu": [
       {
@@ -71,7 +71,11 @@
         "build_type": ["Release"],
         "arch": ["amd64"],
         "minimal": false,
-        "extra_cmake_args": "-Dvalidator_keys=ON"
+        "extra_cmake_args": "-Dvalidator_keys=ON",
+        "package": {
+          "type": "deb",
+          "image": "ghcr.io/xrplf/xrpld/packaging-debian:sha-b6a8995"
+        }
       }
     ],
 
@@ -81,28 +85,11 @@
         "build_type": ["Release"],
         "arch": ["amd64"],
         "minimal": false,
-        "extra_cmake_args": "-Dvalidator_keys=ON"
-      }
-    ]
-  },
-  "package_configs": {
-    "debian": [
-      {
-        "compiler": ["gcc"],
-        "build_type": ["Release"],
-        "arch": ["amd64"],
-        "minimal": false,
-        "image": "ghcr.io/xrplf/xrpld/packaging-debian:sha-577d745"
-      }
-    ],
-
-    "rhel": [
-      {
-        "compiler": ["gcc"],
-        "build_type": ["Release"],
-        "arch": ["amd64"],
-        "minimal": false,
-        "image": "ghcr.io/xrplf/xrpld/packaging-rhel:sha-577d745"
+        "extra_cmake_args": "-Dvalidator_keys=ON",
+        "package": {
+          "type": "rpm",
+          "image": "ghcr.io/xrplf/xrpld/packaging-rhel:sha-b6a8995"
+        }
       }
     ]
   }

.github/scripts/strategy-matrix/macos.json

@@ -12,6 +12,19 @@
       "extra_cmake_args": "-DCMAKE_POLICY_VERSION_MINIMUM=3.5",
       "build_only": true,
       "minimal": false
+    },
+    {
+      "build_type": "Release",
+      "extra_cmake_args": "-DCMAKE_POLICY_VERSION_MINIMUM=3.5",
+      "toolchain": "nix",
+      "minimal": false
+    },
+    {
+      "build_type": "Debug",
+      "extra_cmake_args": "-DCMAKE_POLICY_VERSION_MINIMUM=3.5",
+      "toolchain": "nix",
+      "build_only": true,
+      "minimal": false
     }
   ]
 }

.github/workflows/build-nix-images.yml

@@ -12,6 +12,7 @@ on:
       - "nix/**"
       - "!nix/docker/README.md"
       - "!nix/devshell.nix"
+      - "!nix/check-tools/*.txt"
       - "bin/check-tools.sh"
       - "bin/default-loader-path.sh"
       - "bin/install-sanitizer-libs.sh"
@@ -24,6 +25,7 @@ on:
       - "nix/**"
       - "!nix/docker/README.md"
       - "!nix/devshell.nix"
+      - "!nix/check-tools/*.txt"
       - "bin/check-tools.sh"
       - "bin/default-loader-path.sh"
       - "bin/install-sanitizer-libs.sh"
@@ -58,7 +60,7 @@ jobs:
             base_image: debian:bookworm
           - name: rhel
             base_image: registry.access.redhat.com/ubi9/ubi:latest
-    uses: XRPLF/actions/.github/workflows/build-multiarch-image.yml@9e7e4e80af9e684c116b38369add8eea64451f32
+    uses: XRPLF/actions/.github/workflows/build-multiarch-image.yml@65d5a0bd72be4ecea95cff0673a6e0672ab5243a
     with:
       image_name: xrpld/nix-${{ matrix.distro.name }}
       dockerfile: nix/docker/Dockerfile

.github/workflows/build-packaging-images.yml

@@ -6,13 +6,13 @@ on:
       - develop
     paths:
       - ".github/workflows/build-packaging-images.yml"
-      - "package/Dockerfile"
-      - "package/install-packaging-tools.sh"
+      - "bin/install-packaging-tools.sh"
+      - "package/docker/**"
   pull_request:
     paths:
       - ".github/workflows/build-packaging-images.yml"
-      - "package/Dockerfile"
-      - "package/install-packaging-tools.sh"
+      - "bin/install-packaging-tools.sh"
+      - "package/docker/**"
   workflow_dispatch:
 
 concurrency:
@@ -33,14 +33,17 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
+        # Newest of each distro: these images only wrap pre-built binaries, so
+        # they set no floor for consumers. build_pkg.py pins the RPM dist tag.
         distro:
           - name: debian
-            base_image: debian:bookworm
+            base_image: debian:trixie
+          # AlmaLinux rather than UBI, which does not ship rpm-sign.
           - name: rhel
-            base_image: registry.access.redhat.com/ubi9/ubi:latest
-    uses: XRPLF/actions/.github/workflows/build-multiarch-image.yml@9e7e4e80af9e684c116b38369add8eea64451f32
+            base_image: almalinux:10
+    uses: XRPLF/actions/.github/workflows/build-multiarch-image.yml@65d5a0bd72be4ecea95cff0673a6e0672ab5243a
     with:
       image_name: xrpld/packaging-${{ matrix.distro.name }}
-      dockerfile: package/Dockerfile
+      dockerfile: package/docker/Dockerfile
       base_image: ${{ matrix.distro.base_image }}
       push: ${{ github.event_name == 'push' }}

.github/workflows/build-pre-commit-image.yml

@@ -30,7 +30,7 @@ jobs:
     permissions:
       contents: read
       packages: write
-    uses: XRPLF/actions/.github/workflows/build-multiarch-image.yml@9e7e4e80af9e684c116b38369add8eea64451f32
+    uses: XRPLF/actions/.github/workflows/build-multiarch-image.yml@65d5a0bd72be4ecea95cff0673a6e0672ab5243a
     with:
       image_name: xrpld/pre-commit
       dockerfile: bin/pre-commit/Dockerfile

.github/workflows/cargo-audit.yml

@@ -0,0 +1,80 @@
+name: Cargo audit
+
+on:
+  schedule:
+    # 06:32 UTC every Monday.
+    - cron: "32 6 * * 1"
+  push:
+    branches:
+      - "develop"
+      - "release/*"
+    paths:
+      - "crates/**/Cargo.toml"
+      - "crates/Cargo.lock"
+      - ".github/workflows/cargo-audit.yml"
+  pull_request:
+    paths:
+      - "crates/**/Cargo.toml"
+      - "crates/Cargo.lock"
+      - ".github/workflows/cargo-audit.yml"
+  workflow_dispatch:
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+defaults:
+  run:
+    shell: bash
+    working-directory: crates
+
+permissions:
+  contents: read
+
+jobs:
+  audit:
+    runs-on: ubuntu-latest
+    container: ghcr.io/xrplf/xrpld/nix-ubuntu:sha-473fe44
+    permissions:
+      contents: read
+      # Needed to open an issue on scheduled failures.
+      issues: write
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+
+      - name: Run cargo audit
+        id: audit
+        continue-on-error: true
+        run: |
+          set -o pipefail
+          cargo audit | tee /tmp/cargo-audit.txt
+
+      - name: Prepare issue body
+        if: ${{ steps.audit.outcome != 'success' && github.event_name == 'schedule' }}
+        run: |
+          {
+              echo "## \`cargo audit\` found advisories"
+              echo
+              echo '```'
+              cat /tmp/cargo-audit.txt
+              echo '```'
+              echo
+              echo "---"
+              echo "*This issue was automatically created by the cargo-audit workflow.*"
+          } >/tmp/cargo-audit-issue.md
+
+      - name: Create issue
+        if: ${{ steps.audit.outcome != 'success' && github.event_name == 'schedule' }}
+        uses: XRPLF/actions/create-issue@2b8bc36af85b88bca0dd7bfac2e2dc05f94ad712
+        with:
+          title: "cargo audit found vulnerabilities"
+          body_file: /tmp/cargo-audit-issue.md
+          labels: "Bug,Security"
+
+      - name: Fail if advisories were found
+        if: ${{ steps.audit.outcome != 'success' }}
+        run: |
+          echo "cargo audit found advisories!"
+          cat /tmp/cargo-audit.txt
+          exit 1

.github/workflows/check-tools.yml

@@ -79,7 +79,7 @@ jobs:
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
       - name: Prepare runner
-        uses: XRPLF/actions/prepare-runner@c00c22ada3bd6bcda48fcb0d62fbbab49fec8a0f
+        uses: XRPLF/actions/prepare-runner@7bf7ceca5932114abdd0d43493c3c30c5a654e13
         with:
           enable_ccache: false
 

.github/workflows/on-pr.yml

@@ -77,24 +77,28 @@ jobs:
 
             # Keep the paths below in sync with those in `on-trigger.yml`.
             .github/actions/build-deps/**
-            .github/actions/generate-version/**
+            .github/actions/release-info/**
             .github/actions/setup-conan/**
+            .github/actions/setup-nix-env/**
             .github/scripts/strategy-matrix/**
             .github/workflows/reusable-build-test-config.yml
             .github/workflows/reusable-build-test.yml
             .github/workflows/reusable-check-autogen.yml
             .github/workflows/reusable-clang-tidy.yml
             .github/workflows/reusable-package.yml
+            .github/workflows/reusable-rust.yml
             .github/workflows/reusable-strategy-matrix.yml
             .github/workflows/reusable-test.yml
             .github/workflows/reusable-upload-recipe.yml
             .clang-tidy
             .codecov.yml
+            bin/check-nix-store-refs.sh
             bin/check-tools.sh
             bin/default-loader-path.sh
             cfg/**
             cmake/**
             conan/**
+            crates/**
             external/**
             include/**
             src/**
@@ -102,6 +106,9 @@ jobs:
             CMakeLists.txt
             conanfile.py
             conan.lock
+            flake.lock
+            flake.nix
+            nix/**
             LICENSE.md
             package/**
             README.md
@@ -168,6 +175,13 @@ jobs:
     secrets:
       CODECOV_TOKEN: ${{ secrets.CODECOV_TOKEN }}
 
+  rust:
+    needs: should-run
+    if: ${{ needs.should-run.outputs.go == 'true' }}
+    uses: ./.github/workflows/reusable-rust.yml
+    secrets:
+      CODECOV_TOKEN: ${{ secrets.CODECOV_TOKEN }}
+
   package:
     needs: [should-run, build-test]
     # Packaging consumes the debian/rhel release binaries, which are only built
@@ -211,6 +225,7 @@ jobs:
       - check-rename
       - clang-tidy
       - build-test
+      - rust
       - package
       - upload-recipe
       - notify-clio

.github/workflows/on-tag.yml

@@ -1,5 +1,9 @@
-# This workflow uploads the libxrpl recipe to the Conan remote and builds
-# release packages when a versioned tag is pushed.
+# When a versioned tag is pushed, this workflow:
+#
+#   - uploads the libxrpl recipe to the Conan remote
+#   - builds and tests the release binaries
+#   - builds the DEB and RPM packages
+#   - publishes those packages to the XRPLF package repositories
 name: Tag
 
 on:
@@ -24,7 +28,7 @@ jobs:
       remote_password: ${{ secrets.NEXUS_REMOTE_PASSWORD }}
 
   build-test:
-    if: ${{ github.repository == 'XRPLF/rippled' }}
+    if: ${{ github.repository_owner == 'XRPLF' }}
     uses: ./.github/workflows/reusable-build-test.yml
     strategy:
       fail-fast: true
@@ -37,6 +41,12 @@ jobs:
       CODECOV_TOKEN: ${{ secrets.CODECOV_TOKEN }}
 
   package:
-    if: ${{ github.repository == 'XRPLF/rippled' }}
+    if: ${{ github.repository_owner == 'XRPLF' }}
     needs: build-test
     uses: ./.github/workflows/reusable-package.yml
+    with:
+      publish: true
+    secrets:
+      remote_username: ${{ secrets.NEXUS_REMOTE_USERNAME }}
+      remote_password: ${{ secrets.NEXUS_REMOTE_PASSWORD }}
+      signing_key: ${{ secrets.NEXUS_PACKAGES_PRIVATE_KEY }}

.github/workflows/on-trigger.yml

@@ -15,24 +15,28 @@ on:
 
       # Keep the paths below in sync with those in `on-pr.yml`.
       - ".github/actions/build-deps/**"
-      - ".github/actions/generate-version/**"
+      - ".github/actions/release-info/**"
       - ".github/actions/setup-conan/**"
+      - ".github/actions/setup-nix-env/**"
       - ".github/scripts/strategy-matrix/**"
       - ".github/workflows/reusable-build-test-config.yml"
       - ".github/workflows/reusable-build-test.yml"
       - ".github/workflows/reusable-check-autogen.yml"
       - ".github/workflows/reusable-clang-tidy.yml"
       - ".github/workflows/reusable-package.yml"
+      - ".github/workflows/reusable-rust.yml"
       - ".github/workflows/reusable-strategy-matrix.yml"
       - ".github/workflows/reusable-test.yml"
       - ".github/workflows/reusable-upload-recipe.yml"
       - ".clang-tidy"
       - ".codecov.yml"
+      - "bin/check-nix-store-refs.sh"
       - "bin/check-tools.sh"
       - "bin/default-loader-path.sh"
       - "cfg/**"
       - "cmake/**"
       - "conan/**"
+      - "crates/**"
       - "external/**"
       - "include/**"
       - "src/**"
@@ -40,6 +44,9 @@ on:
       - "CMakeLists.txt"
       - "conanfile.py"
       - "conan.lock"
+      - "flake.lock"
+      - "flake.nix"
+      - "nix/**"
       - "LICENSE.md"
       - "package/**"
       - "README.md"
@@ -96,6 +103,11 @@ jobs:
     secrets:
       CODECOV_TOKEN: ${{ secrets.CODECOV_TOKEN }}
 
+  rust:
+    uses: ./.github/workflows/reusable-rust.yml
+    secrets:
+      CODECOV_TOKEN: ${{ secrets.CODECOV_TOKEN }}
+
   upload-recipe:
     needs: build-test
     # Only run when pushing to the develop branch.
@@ -108,3 +120,11 @@ jobs:
   package:
     needs: build-test
     uses: ./.github/workflows/reusable-package.yml
+    with:
+      # Packages are built on every trigger; only develop pushes in XRPLF/rippled
+      # publish them, matching upload-recipe above.
+      publish: ${{ github.repository == 'XRPLF/rippled' && github.event_name == 'push' && github.ref == 'refs/heads/develop' }}
+    secrets:
+      remote_username: ${{ secrets.NEXUS_REMOTE_USERNAME }}
+      remote_password: ${{ secrets.NEXUS_REMOTE_PASSWORD }}
+      signing_key: ${{ secrets.NEXUS_PACKAGES_PRIVATE_KEY }}

.github/workflows/pre-commit.yml

@@ -14,7 +14,7 @@ on:
 jobs:
   # Call the workflow in the XRPLF/actions repo that runs the pre-commit hooks.
   run-hooks:
-    uses: XRPLF/actions/.github/workflows/pre-commit.yml@3ba08d6ddf114092891d48491fc2e26c3ba15552
+    uses: XRPLF/actions/.github/workflows/pre-commit.yml@f1952595d212e86169935135efc66294b4574131
     with:
       runs_on: ubuntu-latest
-      container: '{ "image": "ghcr.io/xrplf/xrpld/pre-commit:sha-f56b79f" }'
+      container: '{ "image": "ghcr.io/xrplf/xrpld/pre-commit:sha-473fe44" }'

.github/workflows/publish-docs.yml

@@ -41,13 +41,13 @@ env:
 jobs:
   build:
     runs-on: ubuntu-latest
-    container: ghcr.io/xrplf/xrpld/nix-ubuntu:sha-fecfc0c
+    container: ghcr.io/xrplf/xrpld/nix-ubuntu:sha-473fe44
     steps:
       - name: Checkout repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
       - name: Prepare runner
-        uses: XRPLF/actions/prepare-runner@c00c22ada3bd6bcda48fcb0d62fbbab49fec8a0f
+        uses: XRPLF/actions/prepare-runner@7bf7ceca5932114abdd0d43493c3c30c5a654e13
         with:
           enable_ccache: false
 

.github/workflows/reusable-build-test-config.yml

@@ -69,6 +69,12 @@ on:
         type: string
         default: ""
 
+      toolchain:
+        description: 'Where the toolchain comes from ("nix" to build the flake CI environment on the runner, empty for the system one). macOS only: Linux always builds in a Nix image, and Nix has no Windows support.'
+        required: false
+        type: string
+        default: ""
+
     secrets:
       CODECOV_TOKEN:
         description: "The Codecov token to use for uploading coverage reports."
@@ -111,6 +117,9 @@ jobs:
       VOIDSTAR_ENABLED: ${{ contains(inputs.cmake_args, '-Dvoidstar=ON') }}
       VALIDATOR_KEYS_ENABLED: ${{ contains(inputs.cmake_args, '-Dvalidator_keys=ON') }}
       SANITIZERS_ENABLED: ${{ inputs.sanitizers != '' }}
+      # The binaries reusable-package.yml consumes. A private repository skips
+      # them except on a tag push, which is what produces its release packages.
+      PACKAGING_ARTIFACTS_ENABLED: ${{ github.event.repository.visibility == 'public' || startsWith(github.ref, 'refs/tags/') }}
     steps:
       - name: Cleanup workspace (macOS and Windows)
         if: ${{ runner.os == 'macOS' || runner.os == 'Windows' }}
@@ -120,10 +129,15 @@ jobs:
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
       - name: Prepare runner
-        uses: XRPLF/actions/prepare-runner@c00c22ada3bd6bcda48fcb0d62fbbab49fec8a0f
+        uses: XRPLF/actions/prepare-runner@7bf7ceca5932114abdd0d43493c3c30c5a654e13
         with:
           enable_ccache: ${{ inputs.ccache_enabled }}
 
+      # Before any step that uses a build tool, composite actions included.
+      - name: Setup Nix environment
+        if: ${{ inputs.toolchain == 'nix' }}
+        uses: ./.github/actions/setup-nix-env
+
       - name: Set ccache log file
         if: ${{ inputs.ccache_enabled && runner.debug == '1' }}
         run: echo "CCACHE_LOGFILE=${{ runner.temp }}/ccache.log" >>"${GITHUB_ENV}"
@@ -148,7 +162,21 @@ jobs:
         with:
           compiler: ${{ inputs.compiler }}
 
+      - name: Use cargo artifacts cache
+        uses: ./.github/actions/cargo-cache
+        with:
+          cache-directories: ${{ env.BUILD_DIR }}/corrosion
+          key: ${{ inputs.config_name }}
+          # two workspaces here because build artifacts are located in 2 places:
+          # - crates/target when cargo is called directly
+          # - build/cargo when cargo is called by cmake
+          workspaces: |
+            crates
+            crates -> ${{ runner.os == 'Windows' && format('../{0}/x64/{1}/cargo', env.BUILD_DIR, inputs.build_type) || format('../{0}/cargo', env.BUILD_DIR) }}
+
+      # `setup-nix-env` already did this for the Nix toolchain.
       - name: Setup Conan
+        if: ${{ inputs.toolchain != 'nix' }}
         env:
           SANITIZERS: ${{ inputs.sanitizers }}
         uses: ./.github/actions/setup-conan
@@ -212,6 +240,24 @@ jobs:
               --target "${CMAKE_TARGET}" \
               2>&1 | tee "${GITHUB_WORKSPACE}/build.log"
 
+      # Nothing may reference the store, so whole trees are checked - the Conan
+      # cache included, since what it holds is what gets uploaded and reused.
+      - name: Check the build output for Nix store references (Nix toolchain)
+        if: ${{ inputs.toolchain == 'nix' }}
+        run: ./bin/check-nix-store-refs.sh "${BUILD_DIR}"
+
+      - name: Check the Conan cache for Nix store references (Nix toolchain)
+        if: ${{ inputs.toolchain == 'nix' }}
+        run: ./bin/check-nix-store-refs.sh "${CONAN_HOME}"
+
+      # Only what PatchNixBinary.cmake retargets: the toolchain in the Linux
+      # images always references the store. Same condition it uses.
+      - name: Check for Nix store references (Linux)
+        if: ${{ runner.os == 'Linux' && env.SANITIZERS_ENABLED == 'false' }}
+        run: |
+          ./bin/check-nix-store-refs.sh "${BUILD_DIR}/xrpld"
+          ./bin/check-nix-store-refs.sh "${BUILD_DIR}/xrpl_tests"
+
       - name: Show ccache statistics
         if: ${{ inputs.ccache_enabled }}
         run: |
@@ -222,7 +268,7 @@ jobs:
           fi
 
       - name: Upload the binary (Linux)
-        if: ${{ github.event.repository.visibility == 'public' && runner.os == 'Linux' }}
+        if: ${{ env.PACKAGING_ARTIFACTS_ENABLED == 'true' && runner.os == 'Linux' }}
         uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
         with:
           name: xrpld-${{ inputs.config_name }}
@@ -236,7 +282,7 @@ jobs:
         run: ./validator-keys --unittest
 
       - name: Upload the validator-keys binary
-        if: ${{ github.event.repository.visibility == 'public' && env.VALIDATOR_KEYS_ENABLED == 'true' }}
+        if: ${{ env.PACKAGING_ARTIFACTS_ENABLED == 'true' && env.VALIDATOR_KEYS_ENABLED == 'true' }}
         uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
         with:
           name: validator-keys-${{ inputs.config_name }}
@@ -323,6 +369,11 @@ jobs:
 
           LD_PRELOAD="$PRELOAD" ./xrpld --unittest --unittest-jobs "${BUILD_NPROC}" 2>&1 | tee "${GITHUB_WORKSPACE}/unittest.log"
 
+      - name: Run Rust tests
+        if: ${{ !inputs.build_only }}
+        working-directory: crates
+        run: cargo nextest run --workspace --all-features --locked --no-tests=warn
+
       # Smoke-run every benchmark module with a single repetition to confirm the
       # benchmarks still build and execute. This is a correctness check, not a
       # performance measurement, so there is nothing to gain from repeating it
@@ -394,6 +445,7 @@ jobs:
           disable_telem: true
           fail_ci_if_error: true
           files: ${{ env.BUILD_DIR }}/coverage.xml
+          flags: cpp
           plugins: noop
           token: ${{ secrets.CODECOV_TOKEN }}
           verbose: true

.github/workflows/reusable-build-test.yml

@@ -51,5 +51,6 @@ jobs:
       config_name: ${{ matrix.config_name }}
       sanitizers: ${{ matrix.sanitizers }}
       compiler: ${{ matrix.compiler || '' }}
+      toolchain: ${{ matrix.toolchain || '' }}
     secrets:
       CODECOV_TOKEN: ${{ secrets.CODECOV_TOKEN }}

.github/workflows/reusable-clang-tidy.yml

@@ -27,14 +27,14 @@ jobs:
   determine-files:
     permissions:
       contents: read
-    uses: XRPLF/actions/.github/workflows/determine-tidy-files.yml@d041ac9f1fa9f07a4ba335eb4c1c82233fb3fef6
+    uses: XRPLF/actions/.github/workflows/determine-tidy-files.yml@70145243b905dc3e040a61d39c00e178cfb96f71
 
   run-clang-tidy:
     name: Run clang tidy
     needs: [determine-files]
     if: ${{ needs.determine-files.outputs.cpp_changed_files != '' || needs.determine-files.outputs.need_full_run == 'true' }}
     runs-on: ["self-hosted", "Linux", "X64", "heavy"]
-    container: "ghcr.io/xrplf/xrpld/nix-debian:sha-fecfc0c"
+    container: "ghcr.io/xrplf/xrpld/nix-debian:sha-473fe44"
     permissions:
       contents: read
       issues: write
@@ -43,7 +43,7 @@ jobs:
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
       - name: Prepare runner
-        uses: XRPLF/actions/prepare-runner@c00c22ada3bd6bcda48fcb0d62fbbab49fec8a0f
+        uses: XRPLF/actions/prepare-runner@7bf7ceca5932114abdd0d43493c3c30c5a654e13
         with:
           enable_ccache: false
 
@@ -59,6 +59,12 @@ jobs:
         with:
           compiler: ${{ env.COMPILER }}
 
+      - name: Use cargo artifacts cache
+        uses: ./.github/actions/cargo-cache
+        with:
+          cache-directories: ${{ env.BUILD_DIR }}/corrosion
+          workspaces: crates -> ../${{ env.BUILD_DIR }}/cargo
+
       - name: Setup Conan
         uses: ./.github/actions/setup-conan
 
@@ -80,13 +86,13 @@ jobs:
               -Dwerr=ON \
               -Dxrpld=ON \
               -Dverify_headers=ON \
+              -Drust=ON \
               ..
 
-      # clang-tidy needs headers generated from proto files
-      - name: Build libxrpl.libpb
+      - name: Build clang-tidy prerequisites
         working-directory: ${{ env.BUILD_DIR }}
         run: |
-          ninja -j ${{ steps.nproc.outputs.nproc }} xrpl.libpb
+          ninja -j ${{ steps.nproc.outputs.nproc }} tidy_prerequisites
 
       - name: Run clang tidy
         id: run_clang_tidy

.github/workflows/reusable-package.yml

@@ -1,17 +1,37 @@
-# Build Linux packages (DEB and RPM) from pre-built binary artifacts (xrpld and
-# validator-keys). Discovers which configurations to package from linux.json
-# (configs in "package_configs") and fans out one job per distro. Only
-# linux/amd64 is supported; the runner is hardcoded in the job below.
+# Build Linux packages from the pre-built xrpld and validator-keys artifacts:
+#
+#   - one job per config that carries a "package" map in linux.json
+#   - that map names the container image and the format it builds there
+#   - every job ends with the image's publish_pkg.py, uploading what it built
+#     with 'publish: true' and doing a --dry-run otherwise
+#
+# Only linux/amd64 is supported; the runner is hardcoded in the job below.
 name: Package
 
 on:
   workflow_call:
     inputs:
-      pkg_release:
-        description: "Package release number. Increment when repackaging the same executable."
+      publish:
+        description: "Whether to publish the packages after building them."
+        required: false
+        type: boolean
+        default: false
+      nexus_url:
+        description: "The base URL of the Nexus instance hosting the deb and rpm repositories."
         required: false
         type: string
-        default: "1"
+        default: https://packages.xrplf.org
+
+    secrets:
+      remote_username:
+        description: "The username of a Nexus account with write access to the repositories."
+        required: false
+      remote_password:
+        description: "The password or token for that Nexus account."
+        required: false
+      signing_key:
+        description: "Armoured PGP private key used to sign the RPMs. Required when publishing."
+        required: false
 
 defaults:
   run:
@@ -41,7 +61,7 @@ jobs:
 
   package:
     needs: [generate-matrix]
-    if: ${{ github.event.repository.visibility == 'public' }}
+    if: ${{ github.event.repository.visibility == 'public' || startsWith(github.ref, 'refs/tags/') }}
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.generate-matrix.outputs.matrix) }}
@@ -56,6 +76,11 @@ jobs:
       - name: Checkout repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
+      - name: Prepare runner
+        uses: XRPLF/actions/prepare-runner@7bf7ceca5932114abdd0d43493c3c30c5a654e13
+        with:
+          enable_ccache: false
+
       - name: Download pre-built xrpld binary
         uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
         with:
@@ -71,10 +96,29 @@ jobs:
       - name: Make binaries executable
         run: chmod +x "${BUILD_DIR}/xrpld" "${BUILD_DIR}/validator-keys"
 
+      - name: Determine release info
+        id: release_info
+        uses: ./.github/actions/release-info
+
       - name: Build package
         env:
-          PKG_RELEASE: ${{ inputs.pkg_release }}
-        run: ./package/build_pkg.sh
+          PACKAGE_TYPE: ${{ matrix.package_type }}
+          PKG_RELEASE: ${{ steps.release_info.outputs.pkg_release }}
+          CHANNEL: ${{ steps.release_info.outputs.channel }}
+        run: |
+          ./package/build_pkg.py \
+              --package-type "${PACKAGE_TYPE}" \
+              --build-dir "${BUILD_DIR}" \
+              --pkg-release "${PKG_RELEASE}" \
+              --channel "${CHANNEL}"
+
+      # Before the upload, so the artifact and the published package are the
+      # same bytes. DEBs are not signed, so the key is never set on that job.
+      - name: Sign RPM
+        if: ${{ inputs.publish && matrix.package_type == 'rpm' }}
+        env:
+          PKG_SIGNING_KEY: ${{ secrets.signing_key }}
+        run: ./package/sign_rpm.py --package-dir "${BUILD_DIR}"
 
       - name: Upload package artifact
         uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
@@ -85,3 +129,17 @@ jobs:
             ${{ env.BUILD_DIR }}/debbuild/*.ddeb
             ${{ env.BUILD_DIR }}/rpmbuild/RPMS/**/*.rpm
           if-no-files-found: error
+
+      - name: Publish package
+        env:
+          CHANNEL: ${{ steps.release_info.outputs.channel }}
+          DRY_RUN_OPTION: ${{ !inputs.publish && '--dry-run' || '' }}
+          NEXUS_URL: ${{ inputs.nexus_url }}
+          NEXUS_USERNAME: ${{ inputs.publish && secrets.remote_username || '' }}
+          NEXUS_PASSWORD: ${{ inputs.publish && secrets.remote_password || '' }}
+        run: |
+          publish_pkg.py \
+              --channel "${CHANNEL}" \
+              --package-dir "${BUILD_DIR}" \
+              --nexus-url "${NEXUS_URL}" \
+              ${DRY_RUN_OPTION}

.github/workflows/reusable-rust.yml

@@ -0,0 +1,80 @@
+# Clippy, coverage and documentation for the Rust crates in crates/. Each runs
+# as an independent job on a GitHub-hosted runner, but inside the same container
+# image used to build the crates in the C++/Corrosion path, so the toolchain
+# (and therefore the lints, coverage instrumentation and the cargo cache) matches
+# what production builds use.
+#
+# Rust unit tests are deliberately NOT run here. They run as part of the C++
+# build (reusable-build-test-config.yml), which already compiles the crates on a
+# self-hosted runner, so there is no need to provision a toolchain again.
+name: Rust
+
+on:
+  workflow_call:
+    secrets:
+      CODECOV_TOKEN:
+        description: "The Codecov token to use for uploading coverage reports."
+        required: true
+
+defaults:
+  run:
+    shell: bash
+    working-directory: crates
+
+permissions:
+  contents: read
+
+jobs:
+  clippy:
+    runs-on: ubuntu-latest
+    container: ghcr.io/xrplf/xrpld/nix-ubuntu:sha-473fe44
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+
+      - name: Use cargo artifacts cache
+        uses: ./.github/actions/cargo-cache
+
+      - name: Run clippy
+        run: cargo clippy --workspace --all-targets --all-features --locked -- -D warnings
+
+  coverage:
+    runs-on: ubuntu-latest
+    container: ghcr.io/xrplf/xrpld/nix-ubuntu:sha-473fe44
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+
+      - name: Use cargo artifacts cache
+        uses: ./.github/actions/cargo-cache
+
+      - name: Generate coverage report
+        run: cargo llvm-cov nextest --workspace --all-features --locked --no-tests=warn --lcov --output-path lcov.info
+
+      - name: Upload coverage report
+        if: ${{ github.repository == 'XRPLF/rippled' }}
+        uses: codecov/codecov-action@fb8b3582c8e4def4969c97caa2f19720cb33a72f # v7.0.0
+        with:
+          disable_search: true
+          disable_telem: true
+          fail_ci_if_error: true
+          files: crates/lcov.info
+          flags: rust
+          plugins: noop
+          token: ${{ secrets.CODECOV_TOKEN }}
+          verbose: true
+
+  doc:
+    runs-on: ubuntu-latest
+    container: ghcr.io/xrplf/xrpld/nix-ubuntu:sha-473fe44
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+
+      - name: Use cargo artifacts cache
+        uses: ./.github/actions/cargo-cache
+
+      - name: Build documentation
+        env:
+          RUSTDOCFLAGS: "-D warnings"
+        run: cargo doc --workspace --no-deps --all-features --locked

.github/workflows/reusable-upload-recipe.yml

@@ -40,7 +40,7 @@ defaults:
 jobs:
   upload:
     runs-on: ubuntu-latest
-    container: ghcr.io/xrplf/xrpld/nix-ubuntu:sha-fecfc0c
+    container: ghcr.io/xrplf/xrpld/nix-ubuntu:sha-473fe44
     env:
       REMOTE_NAME: ${{ inputs.remote_name }}
       CONAN_LOGIN_USERNAME_XRPLF: ${{ secrets.remote_username }}
@@ -49,9 +49,14 @@ jobs:
       - name: Checkout repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
-      - name: Generate build version number
-        id: version
-        uses: ./.github/actions/generate-version
+      - name: Prepare runner
+        uses: XRPLF/actions/prepare-runner@7bf7ceca5932114abdd0d43493c3c30c5a654e13
+        with:
+          enable_ccache: false
+
+      - name: Determine release info
+        id: release_info
+        uses: ./.github/actions/release-info
 
       - name: Set up Conan
         uses: ./.github/actions/setup-conan
@@ -64,8 +69,8 @@ jobs:
 
       - name: Upload Conan recipe (version)
         run: |
-          conan export . --version=${{ steps.version.outputs.version }}
-          conan upload --confirm --check --remote="${REMOTE_NAME}" xrpl/${{ steps.version.outputs.version }}
+          conan export . --version=${{ steps.release_info.outputs.version }}
+          conan upload --confirm --check --remote="${REMOTE_NAME}" xrpl/${{ steps.release_info.outputs.version }}
 
       # When this workflow is triggered by a push event, it will always be when merging into the
       # 'develop' branch, see on-trigger.yml.
@@ -92,4 +97,4 @@ jobs:
           conan upload --confirm --check --remote="${REMOTE_NAME}" xrpl/release
 
     outputs:
-      ref: xrpl/${{ steps.version.outputs.version }}
+      ref: xrpl/${{ steps.release_info.outputs.version }}

.github/workflows/upload-conan-deps.yml

@@ -68,10 +68,15 @@ jobs:
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
       - name: Prepare runner
-        uses: XRPLF/actions/prepare-runner@c00c22ada3bd6bcda48fcb0d62fbbab49fec8a0f
+        uses: XRPLF/actions/prepare-runner@7bf7ceca5932114abdd0d43493c3c30c5a654e13
         with:
           enable_ccache: false
 
+      # Before any step that uses a build tool, composite actions included.
+      - name: Setup Nix environment
+        if: ${{ matrix.toolchain == 'nix' }}
+        uses: ./.github/actions/setup-nix-env
+
       - name: Print build environment
         uses: XRPLF/actions/print-build-env@59dec886e4afb05a1724443af08baccbc045b574
 
@@ -87,7 +92,9 @@ jobs:
         with:
           compiler: ${{ matrix.compiler }}
 
+      # `setup-nix-env` already did this for the Nix toolchain.
       - name: Setup Conan
+        if: ${{ matrix.toolchain != 'nix' }}
         env:
           SANITIZERS: ${{ matrix.sanitizers }}
         uses: ./.github/actions/setup-conan
@@ -106,6 +113,10 @@ jobs:
           log_verbosity: ${{ runner.os == 'Windows' && 'quiet' || 'verbose' }}
           sanitizers: ${{ matrix.sanitizers }}
 
+      - name: Check the Conan cache for Nix store references (Nix toolchain)
+        if: ${{ matrix.toolchain == 'nix' }}
+        run: ./bin/check-nix-store-refs.sh "${CONAN_HOME}"
+
       - name: Log into Conan remote
         if: ${{ github.repository == 'XRPLF/rippled' && (github.event_name == 'push' || github.event_name == 'workflow_dispatch') }}
         run: conan remote login "${CONAN_REMOTE_NAME}" "${{ secrets.NEXUS_REMOTE_USERNAME }}" --password "${{ secrets.NEXUS_REMOTE_PASSWORD }}"

.gitignore

@@ -72,11 +72,16 @@ DerivedData
 /.zed/
 
 # AI tools.
+# Shared/committable AI agent config (AGENTS.md, CLAUDE.md, GEMINI.md, .claude/settings.json,
+# tool-specific rules files, etc.) should be checked in — see CONTRIBUTING.md. Only the
+# personal/local variants below are ignored.
 /.agent
 /.agents
 /.augment
-/.claude
-/CLAUDE.md
+/.claude/settings.local.json
+AGENTS.override.md
+CLAUDE.local.md
+GEMINI.local.md
 
 # Python
 __pycache__
@@ -89,3 +94,6 @@ target/
 
 # clangd cache
 /.cache
+
+# Rust build directory
+crates/target

.pre-commit-config.yaml

@@ -62,6 +62,15 @@ repos:
         types_or: [c++, c, proto]
         exclude: ^include/xrpl/protocol_autogen/(transactions|ledger_entries)/
 
+  - repo: local
+    hooks:
+      - id: cargo-fmt
+        name: cargo fmt
+        entry: cargo fmt --manifest-path crates/Cargo.toml --all
+        language: system
+        types: [rust]
+        pass_filenames: false # rustfmt formats the whole workspace
+
   - repo: https://github.com/BlankSpruce/gersemi-pre-commit
     rev: e98930bdc210d3387007f9252d8c1694ea7e410f # frozen: 0.27.7
     hooks:
@@ -73,11 +82,27 @@ repos:
       - id: prettier
         args: [--end-of-line=auto]
 
+  # Scoped to package/: the rest of the repo's Python has pre-existing findings,
+  # so widening these is its own change.
+  - repo: https://github.com/astral-sh/ruff-pre-commit
+    rev: 7c55798a78262d14b2074abf623d8a992ebb70d4 # frozen: v0.16.2
+    hooks:
+      - id: ruff-check
+        args: [--fix]
+        files: ^package/.*\.py$
+
   - repo: https://github.com/psf/black-pre-commit-mirror
     rev: 4160603246a6b365d4a2af661c6d71b0a0f50478 # frozen: 26.5.1
     hooks:
       - id: black
 
+  - repo: https://github.com/pre-commit/mirrors-mypy
+    rev: 41e691678310dfd3833f7ab4e180ddb014310356 # frozen: v2.3.0
+    hooks:
+      - id: mypy
+        args: [--strict]
+        files: ^package/.*\.py$
+
   - repo: https://github.com/scop/pre-commit-shfmt
     rev: 05c1426671b9237fb5e1444dd63aa5731bec0dfb # frozen: v3.13.1-1
     hooks:

AGENTS.md

@@ -0,0 +1,42 @@
+# AGENTS.md
+
+This file provides guidance to AI coding agents (Claude Code, and other AGENTS.md-compatible tools) when working with code in this repository.
+
+## Build
+
+Required on Linux/macOS: use the Nix devshell, which sets up the compiler, Conan, ccache, and (optionally) Rust automatically.
+
+```bash
+nix develop
+```
+
+For alternate devshell variants (specific compiler, no-compiler, coverage), see [docs/build/nix.md](./docs/build/nix.md). For the manual build steps, CMake options, and protocol codegen commands, see [BUILD.md](./BUILD.md) (`## Steps`, `## Options`, `## Code generation`).
+
+Rust crate tests (independent of the CMake build): `cargo test --manifest-path crates/Cargo.toml --workspace` (CI uses `cargo nextest`).
+
+## Testing
+
+Unit tests are a custom framework built into the `xrpld` binary itself (not Boost.Test/GTest/Catch); see [CONTRIBUTING.md](./CONTRIBUTING.md#unit-tests) for the basic invocation. Notes not covered there:
+
+- A suite's `--unittest` name is built from the arguments to its `BEAST_DEFINE_TESTSUITE`/`BEAST_DEFINE_TESTSUITE_PRIO` macro (usually at the bottom of the test file), in reverse order and joined with `.`: `BEAST_DEFINE_TESTSUITE(Credentials, app, xrpl)` → `xrpl.app.Credentials`.
+- `--unittest-arg` does nothing — don't use it.
+- Tests that run offline in under a minute should be automatic `--unittest` suites; anything else is a manual/integration test.
+- New tests should be written using `gtest` under `src/tests/` unless that isn't possible, in which case fall back to the legacy Beast framework under `src/test/`. `tests/` (top-level) holds integration tests exercised against `libxrpl`/`xrpld`.
+
+## Lint/Format
+
+See [CONTRIBUTING.md](./CONTRIBUTING.md#pre-commit-hooks) for `pre-commit` setup and [CONTRIBUTING.md](./CONTRIBUTING.md#clang-tidy) for `clang-tidy` (opt-in, needs local `clang-tidy` and generated headers).
+
+## Code Style
+
+New file placement and header levelization: see [CONTRIBUTING.md](./CONTRIBUTING.md#before-making-a-pull-request). Braces, whitespace, member order, and other conventions: see [docs/CodingStyle.md](./docs/CodingStyle.md). `XRPL_ASSERT`/`UNREACHABLE` contracts: see [CONTRIBUTING.md](./CONTRIBUTING.md#contracts-and-instrumentation). Commit messages: see [CONTRIBUTING.md](./CONTRIBUTING.md#good-commit-messages).
+
+## Architecture
+
+Paths below reflect the current layout; update this section if modularization moves a subsystem to a different directory.
+
+- `include/xrpl/` + `src/libxrpl/` — the core protocol library: ledger, shamap, consensus, crypto, json, resource, nodestore, rdb, peerfinder, and `tx/` (transaction application: `Transactor.cpp`, `applySteps.cpp`, invariants, payment paths). `tx/transactors/` has one file per transaction type, grouped by subsystem: `escrow/`, `vault/`, `lending/`, `sponsor/`, `nft/`, `token/` (MPT), `payment_channel/`, `permissioned_domain/`, `dex/`, `oracle/`, `did/`, `credentials/`, `bridge/`, `check/`, `delegate/`, `account/`, `system/`. Any change to transaction-processing behavior must be gated behind an Amendment.
+- `src/xrpld/` — the server application built on top of `libxrpl`: `app`, `core`, `overlay` (P2P networking), `peerfinder`, `perflog`, `rpc`, `shamap`. `main` builds an `ApplicationImp` implementing `Application`; most components hold a reference to it (`app_`), giving broad cross-component access — expect to trace call chains through `Application&`.
+- `src/test/` — unit tests mirroring the subsystems above, plus `jtx/` (the transaction-building test DSL — e.g. `jtx/escrow.h`, `jtx/vault.h`, `jtx/sponsor.h`, `jtx/permissioned_dex.h`) and `unit_test/` (the custom test framework itself, derived from Beast).
+- `src/tests/` — unit tests for `libxrpl` written in `gtest`, gradually replacing the `src/test` equivalents.
+- `crates/` — a Rust workspace (only built with `-Dxrpld -Drust=ON`) bridged into C++ via `cxxbridge`/the `cxx` crate; currently just a `hello_world` interop scaffold. Requires the Rust toolchain pinned in `rust-toolchain.toml` (the Nix devshell provides it automatically).

API-CHANGELOG.md

@@ -28,17 +28,17 @@ This section contains changes targeting a future version.
 
 ### Additions
 
+- `tx`: A validated `Batch` transaction now includes `inner_results`, an array in `RawTransactions` order with one entry per inner transaction the node applied: `hash`, `result` (the transaction result code) and `applied` (whether its changes ended up in the ledger; `false` for an inner transaction that failed with a `ter`/`tem`/`tef` code, and for every inner transaction of a `tfAllOrNothing` batch that rolled back). Inner transactions that fail are not in the ledger, so this is the only record of them. The field is present only when this node built the validated ledger itself and has `[ledger_tx_tables]` enabled; a node that acquired the ledger from the network omits it.
 - `account_tx`: Added an optional `delegate` request object to filter delegated transactions. The object requires `delegate_filter`, which must be either `actor` for transactions owned by the requested account but signed by another account, or `authorizer` for transactions signed by the requested account on behalf of another account. The optional `counter_party` account narrows the results to a specific signer/delegate for `actor` or a specific owner/delegator for `authorizer`. Malformed `delegate`, `delegate_filter`, and `counter_party` values return standard invalid field errors, and invalid account IDs return `actMalformed`.
   When paginating delegate-filtered queries, a marker from a delegate-filtered query includes a `delegate` flag and is only valid for follow-up requests that also supply `delegate` (mixing marker conventions returns `invalidParams`). Because filtering is applied after the ledger scan, a page may contain fewer results than `limit` (possibly zero) while still returning a marker, so callers must continue until no marker is present.
-
 - `ledger_entry`, `account_objects`: The `Delegate` ledger entry now includes an optional `DestinationNode` field, which stores the index into the authorized account's owner directory. This field is present on entries created after bidirectional directory tracking was introduced and may appear in RPC responses for those entries. ([#6681](https://github.com/XRPLF/rippled/pull/6681))
-
 - `server_definitions`: Added the following new sections to the response ([#6321](https://github.com/XRPLF/rippled/pull/6321)):
   - `TRANSACTION_FORMATS`: Describes the fields and their optionality for each transaction type, including common fields shared across all transactions.
   - `LEDGER_ENTRY_FORMATS`: Describes the fields and their optionality for each ledger entry type, including common fields shared across all ledger entries.
   - `TRANSACTION_FLAGS`: Maps transaction type names to their supported flags and flag values.
   - `LEDGER_ENTRY_FLAGS`: Maps ledger entry type names to their flags and flag values.
   - `ACCOUNT_SET_FLAGS`: Maps AccountSet flag names (asf flags) to their numeric values.
+- `ledger`: `nftoken_id`, `nftoken_ids`, and `offer_id` are now included in transaction metadata when transactions are expanded (`expand`, or admin-only `full`), matching the `tx`, `account_tx`, and `subscribe` (`transactions` stream) responses. ([#5706](https://github.com/XRPLF/rippled/pull/5706))
 
 ### Bugfixes
 
@@ -54,6 +54,12 @@ This section contains changes targeting a future version.
 - `submit`: The `fail_hard` field now returns an error if the value is not a boolean. [#6529](https://github.com/XRPLF/rippled/pull/6529)
 - `subscribe`: The `taker` field in the `books` array now returns `actMalformed` instead of `badIssuer` if the value is not a valid account. [#6529](https://github.com/XRPLF/rippled/pull/6529)
 - Fixed a bug in `Forwarded` HTTP header parsing where the extracted IP address could be incorrect when no comma or semicolon delimiter follows the address. This could cause the server to misidentify a client's IP address when operating behind a reverse proxy. [#6529](https://github.com/XRPLF/rippled/pull/6529)
+- `vault_info`: Errors now identify what the request got wrong instead of reporting every failure as the unregistered token `malformedRequest`, and the `error`, `error_code` and `error_message` fields now agree with each other. An invalid `vault_id` or `seq` returns `invalidParams`, an invalid `owner` returns `actMalformed`, and a request that mixes `vault_id` with `owner`/`seq` or supplies neither returns `invalidParams` with a message naming the accepted combinations. [#8015](https://github.com/XRPLF/rippled/pull/8015)
+- `vault_info`: A well-formed all-zero `vault_id` now returns `entryNotFound` instead of being rejected as malformed, and `entryNotFound` responses now include `error_code` and `error_message`. Clients that request `ripplerpc` 3.0 or above therefore receive HTTP 400 with that error rather than HTTP 200. [#8015](https://github.com/XRPLF/rippled/pull/8015)
+- `vault_info`: `vault_id` and `owner` must now be strings, matching how `ledger_entry` reads the same fields. An object or an array in either field previously produced an internal error, and a number was silently converted to its decimal text; `vault_id` now returns `invalidParams` and `owner` returns `actMalformed`. [#8015](https://github.com/XRPLF/rippled/pull/8015)
+- `gateway_balances`: The `account` and `ident` fields now return an `invalidParams` error if the value is not a string, instead of an `internal` error. [#7655](https://github.com/XRPLF/rippled/pull/7655)
+- `account_lines`: The `peer` field now returns an error if the value is not a string. [#7728](https://github.com/XRPLF/rippled/pull/7728)
+- `ledger`: `delivered_amount` is now included in the metadata of successful `AccountDelete` transactions when transactions are expanded (`expand`, or admin-only `full`). Previously it was only added for `Payment` and `CheckCash`, which made `ledger` inconsistent with `tx` and `account_tx`. [#5706](https://github.com/XRPLF/rippled/pull/5706)
 
 ## XRP Ledger server version 3.1.0
 

BUILD.md

@@ -4,34 +4,14 @@
 
 ## Minimum Requirements
 
-See [System Requirements](https://xrpl.org/system-requirements.html).
+For the hardware needed to run a node, see
+[System Requirements](https://xrpl.org/system-requirements.html).
 
-Building xrpld generally requires Git, Python, Conan, CMake, and a C++
-compiler.
-
-- [Python](https://www.python.org/downloads/)
-- [Conan](https://conan.io/downloads.html)
-- [CMake](https://cmake.org/download/)
-
-You can verify that the required tools are installed and runnable with:
-
-```bash
-./bin/check-tools.sh
-```
-
-`xrpld` is written in the C++23 dialect. The [tested compiler versions][cpp23-support] are:
-
-| Compiler    | Version         |
-| ----------- | --------------- |
-| GCC         | 15.2            |
-| Clang       | 22              |
-| Apple Clang | 21              |
-| MSVC        | 19.44[^windows] |
+For the software needed to build xrpld, see the
+[environment setup guide](./docs/build/environment.md).
 
 ## Operating Systems
 
-Please see the [environment setup guide](./docs/build/environment.md) for detailed instructions for all platforms.
-
 ### Linux
 
 The Ubuntu Linux distribution has received the highest level of quality
@@ -47,9 +27,8 @@ CI testing is done in macOS 26 (Tahoe), but the build defaults `CMAKE_OSX_DEPLOY
 
 ### Windows
 
-Windows is used by some engineers for development only.
-
-[^windows]: Windows is not recommended for production use.
+Windows is used by some engineers for development only, and is not recommended
+for production use.
 
 ## Steps
 
@@ -74,37 +53,25 @@ releases](https://github.com/XRPLF/rippled/releases).
 
 ### Set Up Conan
 
-After you have a [C++ development environment](./docs/build/environment.md) ready with Git, Python,
-Conan, CMake, and a C++ compiler, you may need to set up your Conan profile.
-
-These instructions assume a basic familiarity with Conan and CMake. If you are
-unfamiliar with Conan, then please read [this crash course](./docs/build/conan.md) or the official
-[Getting Started][conan-getting-started] walkthrough.
-
-#### Profiles
-
-We recommend that you install our Conan profiles:
+Once your [development environment](./docs/build/environment.md) is ready, set
+Conan up for this repository:
 
 ```bash
-conan config install conan/profiles/ -tf $(conan config home)/profiles/
+./conan/init.sh
 ```
 
-You can check your Conan profile by running:
+That installs our [`global.conf`](./conan/global.conf), our Conan
+[profiles](./conan/profiles), and the `xrplf` remote that hosts some of our
+dependencies. It honours `CONAN_HOME` and never deletes an existing Conan home,
+so it is safe to re-run — it only overwrites the files it manages.
 
-```bash
-conan profile show
-```
+> [!TIP]
+> In the [Nix development shell](./docs/build/nix.md#conan-configuration) this is
+> already done for you: the script runs on entry.
 
-If the default profile is not suitable for your environment, you can create a custom profile and pass it to Conan.
-More information on customizing Conan can be found in the [Advanced Conan configuration](./docs/build/advanced_conan.md).
-
-#### Add xrplf remote
-
-Run the following command to add the `xrplf` remote, which hosts some of our dependencies:
-
-```bash
-conan remote add --index 0 --force xrplf https://conan.xrplf.org/repository/conan/
-```
+You can inspect the resulting profile with `conan profile show`. If it is not
+suitable for your environment, create a custom profile and pass it to Conan — see
+[Advanced Conan configuration](./docs/build/advanced_conan.md).
 
 ### Set Up Ccache
 
@@ -269,10 +236,14 @@ which is only enabled when the `coverage` option is set, e.g. with
 Prerequisites for the coverage report:
 
 - [gcovr tool][gcovr] (can be installed e.g. with [pip][python-pip])
-- `gcov` for GCC (installed with the compiler by default) or
-- `llvm-cov` for Clang (installed with the compiler by default)
+- `gcov` for GCC or `llvm-cov` for Clang, usually installed with the compiler
 - `Debug` build type
 
+> [!NOTE]
+> Clang coverage is not available in the [Nix development shell](./docs/build/nix.md#building-xrpld-in-the-nix-shell):
+> its `clang` shells do not ship `llvm-cov`. Use a `gcc` shell instead (`.#gcc`,
+> or `.#gcc-plain` on Linux), which provides a `gcov` matching its compiler.
+
 A coverage report is created when the following steps are completed, in order:
 
 1. `xrpld` binary built with instrumentation data, enabled by the `coverage`
@@ -333,6 +304,7 @@ See [Sanitizers docs](./docs/build/sanitizers.md) for more details.
 | ---------------- | ------------- | ----------------------------------------------------------------------------- |
 | `assert`         | OFF           | Force enabling assertions.                                                    |
 | `coverage`       | OFF           | Prepare the coverage report.                                                  |
+| `rust`           | OFF           | Build the Rust crates and the C++ code that depends on them.                  |
 | `tests`          | OFF           | Build tests.                                                                  |
 | `unity`          | OFF           | Configure a unity build.                                                      |
 | `verify_headers` | ON            | Make the `verify-headers` target available to compile each header on its own. |
@@ -345,6 +317,30 @@ memory) since they concatenate sources into fewer translation units. Non-unity
 builds may be faster for incremental builds, and can be helpful for detecting
 `#include` omissions.
 
+### Rust crates
+
+The Rust crates in `crates/` are only part of the build when `rust` is ON. With
+`-Drust=OFF` (the default) the `crates` directory is not added to the build, no
+cxxbridge bindings are generated, and the C++ tests that exercise the Rust
+interop are not compiled — so no Rust toolchain is needed. CI builds always pass
+`-Drust=ON`.
+
+With `-Drust=ON` you need one extra dependency: a Rust toolchain (`cargo`,
+`rustc`) matching the channel pinned in
+[`rust-toolchain.toml`](./rust-toolchain.toml), which compiles the crates and
+generates the cxxbridge bindings. It is provided by the
+[Nix development shell](./docs/build/nix.md), so `-Drust=ON` works there without
+any extra setup; otherwise install it as described in
+[Rust](./docs/build/environment.md#rust).
+
+The crates also have their own Rust unit tests. Those are run with `cargo` and
+need only the Rust toolchain, independently of CMake and of the `rust` option
+(CI runs them with `cargo nextest`):
+
+```bash
+cargo test --manifest-path crates/Cargo.toml --workspace
+```
+
 ### Verifying headers
 
 The regular build only compiles `.cpp` files, so a header is only ever checked
@@ -389,10 +385,14 @@ After any updates or changes to dependencies, you may need to do the following:
 4. [Regenerate lockfile](./docs/build/advanced_conan.md#conan-lockfile).
 5. Re-run [conan install](#build-and-test).
 
+If you are using the Nix development shell, whether prebuilt Conan binaries apply
+depends on your platform — see
+[Prebuilt packages](./docs/build/nix.md#prebuilt-packages).
+
 #### ERROR: Package not resolved
 
 If you're seeing an error like `ERROR: Package 'snappy/1.1.10' not resolved: Unable to find 'snappy/1.1.10#968fef506ff261592ec30c574d4a7809%1756234314.246' in remotes.`,
-please [add `xrplf` remote](#add-xrplf-remote) or re-run `conan export` for [patched recipes](./docs/build/advanced_conan.md#patched-recipes).
+please [set Conan up](#set-up-conan) so the `xrplf` remote is configured, or re-run `conan export` for [patched recipes](./docs/build/advanced_conan.md#patched-recipes).
 
 ### `protobuf/port_def.inc` file not found
 
@@ -412,7 +412,6 @@ For example, if you want to build Debug:
 1. For conan install, pass `--settings build_type=Debug`
 2. For cmake, pass `-DCMAKE_BUILD_TYPE=Debug`
 
-[cpp23-support]: https://en.cppreference.com/w/cpp/compiler_support/23
 [conan-getting-started]: https://docs.conan.io/en/latest/getting_started.html
 [unity-build]: https://en.wikipedia.org/wiki/Unity_build
 [gcovr]: https://gcovr.com/en/stable/getting-started.html

CLAUDE.md

@@ -0,0 +1 @@
+AGENTS.md

CMakeLists.txt

@@ -158,7 +158,13 @@ if(coverage)
     include(XrplCov)
 endif()
 
+add_custom_target(tidy_prerequisites)
+
+if(rust)
+    add_subdirectory(crates)
+endif()
 include(XrplCore)
+
 include(XrplProtocolAutogen)
 include(XrplInstall)
 include(XrplValidatorKeys)

CONTRIBUTING.md

@@ -59,6 +59,17 @@ to an existing XLS. Neither change will be released (in an amendment's
 case, marked as `Supported::yes`) until the corresponding XLS's status
 is `Final`.
 
+## AI coding agents
+
+[`AGENTS.md`](./AGENTS.md) (and its `CLAUDE.md` symlink, for Claude Code) holds shared, checked-in guidance for AI coding agents working in this repository — build/test/lint commands and architecture notes. Additional `AGENTS.md` files may exist in subdirectories to give agents context specific to that part of the codebase; whenever you add one, also add a `CLAUDE.md` symlink pointing to it (`ln -s AGENTS.md CLAUDE.md`) so Claude Code picks it up too.
+
+If you want to give an agent personal instructions that shouldn't be shared with other contributors (e.g. your own workflow preferences), those are gitignored, not checked in:
+
+- `CLAUDE.local.md` — read by Claude Code alongside `CLAUDE.md`.
+- `AGENTS.override.md` — read by AGENTS.md-compatible tools that support a personal override file layered on top of `AGENTS.md`.
+
+Likewise, `.claude/settings.local.json` is for personal, untracked Claude Code settings, while `.claude/settings.json` is shared.
+
 ## Before making a pull request
 
 (Or marking a draft pull request as ready.)
@@ -82,7 +93,7 @@ If you create new source files, they must be organized as follows:
   under `include/xrpl`, and source (`.cpp`) files must go under
   `src/libxrpl`.
 - All other non-test files must go under `src/xrpld`.
-- All test source files must go under `src/test`.
+- New test source files should use `gtest` and go under `src/tests`, unless that isn't possible, in which case they should use our legacy test framework and go under `src/test`.
 - All benchmark source files must go under `src/benchmarks`.
 
 The source must be formatted according to the style guide below. The easiest
@@ -225,8 +236,9 @@ environment, so you don't need to install most of the individual tools
 yourself. The version of each hook sourced from an external repository
 (`clang-format`, `gersemi`, etc.) is pinned in that file, so running the hooks
 locally uses exactly the same versions as CI. A few `local` hooks — most notably
-`clang-tidy` — run tools from your own environment; see
-[Installing clang-tidy](#installing-clang-tidy) for how to get those.
+`clang-tidy` and `cargo fmt` — run tools from your own environment; see
+[Installing clang-tidy](#installing-clang-tidy) and
+[Rust](./docs/build/environment.md#rust) for how to get those.
 
 To get started, install `pre-commit` and enable the git hook scripts:
 
@@ -255,6 +267,7 @@ The hooks configured in this repository include, among others:
 - `clang-tidy` — C++ static analysis (see [Clang-tidy](#clang-tidy)); opt in with `TIDY=1`
 - `fix-include-style`, `fix-pragma-once`, `check-doxygen-style` — C++ hygiene
 - `gersemi` — CMake formatting
+- `cargo fmt` — Rust formatting for the crates in `crates/`
 - `prettier`, `black`, `shfmt` — formatting for JavaScript/JSON/Markdown, Python, and shell
 - `cspell` — spell checking
 
@@ -319,7 +332,11 @@ See the [environment setup guide](./docs/build/environment.md#clang-tidy) for ho
 
 ### Running clang-tidy locally
 
-Before running clang-tidy, you must build the project to generate required files (particularly protobuf headers). Refer to [`BUILD.md`](./BUILD.md) for build instructions.
+Before running clang-tidy, you must generate the files it depends on (protobuf headers, and, when the project is configured with `-Drust=ON`, the cxxbridge headers from the Rust crates). Configure the project as described in [`BUILD.md`](./BUILD.md), then build the `tidy_prerequisites` target, which generates all of them:
+
+```bash
+cmake --build build --target tidy_prerequisites
+```
 
 #### Via pre-commit (recommended)
 

README.md

@@ -54,6 +54,7 @@ Here are some good places to start learning the source code:
 | `./docs`   | Source documentation files and doxygen config. |
 | `./cfg`    | Example configuration files.                   |
 | `./src`    | Source code.                                   |
+| `./crates` | Rust source code.                              |
 
 Some of the directories under `src` are external repositories included using
 git-subtree. See those directories' README files for more details.

bin/check-nix-store-refs.sh

@@ -0,0 +1,111 @@
+#!/usr/bin/env bash
+# Fail if a binary under <path> records a /nix/store path it resolves at run
+# time. See docs/build/nix.md#prebuilt-packages for why that matters.
+#
+# <path> is a file or a directory. macOS: nothing may reference the store, so
+# point it at whole trees. Linux: the toolchain always writes the store into
+# PT_INTERP and RUNPATH, so only at what cmake/PatchNixBinary.cmake retargets.
+#
+# Only Mach-O / ELF is inspected. Static archives hold store paths in debug info
+# alone; the scripts in a Conan cache are all git hook samples and autotools
+# scratch, 36 false positives to 0 real.
+#
+# Usage: bin/check-nix-store-refs.sh <path>
+
+set -euo pipefail
+
+if [ "$#" -ne 1 ]; then
+    echo "usage: $0 <path>" >&2
+    exit 2
+fi
+
+if [ ! -e "$1" ]; then
+    echo "$0: no such path: $1" >&2
+    exit 2
+fi
+
+case "$(uname -s)" in
+    Darwin)
+        format=Mach-O
+        recorded_paths=macho_recorded_paths
+        tool=otool
+        ;;
+    Linux)
+        format=ELF
+        recorded_paths=elf_recorded_paths
+        tool=readelf
+        ;;
+    *)
+        echo "Unsupported OS - skipping the Nix store reference check."
+        exit 0
+        ;;
+esac
+
+# `pipefail` would catch this too, but only as a bare nonzero exit.
+if ! command -v "${tool}" >/dev/null; then
+    echo "$0: ${tool} not found; cannot inspect binaries" >&2
+    exit 2
+fi
+
+# Both list what the file records. `ldd` would answer what this machine resolves
+# now, which is wrong both ways: store paths for a correctly patched binary,
+# silence for a store RUNPATH that resolves nowhere.
+
+# `name` covers LC_ID_DYLIB and LC_LOAD*_DYLIB, `path` covers LC_RPATH.
+macho_recorded_paths() {
+    otool -l "$1" | sed -nE 's#^ *(name|path) ([^ ]*).*#\2#p'
+}
+
+# RPATH and RUNPATH are colon-separated.
+elf_recorded_paths() {
+    readelf -ldW "$1" |
+        sed -nE \
+            -e 's#.*program interpreter: ([^]]*)\].*#\1#p' \
+            -e 's#.*\((RPATH|RUNPATH|NEEDED)\).*\[([^]]*)\].*#\2#p' |
+        tr ':' '\n'
+}
+
+checked=0
+skipped=0
+leaked=0
+
+while IFS= read -r file; do
+    case "$(file -b "${file}" 2>/dev/null)" in
+        *"${format}"*) ;;
+        *)
+            skipped=$((skipped + 1))
+            continue
+            ;;
+    esac
+    checked=$((checked + 1))
+
+    # Filter after extracting, or a search path starting elsewhere ($ORIGIN)
+    # hides the rest. `sed` not `grep`: grep calls "no matches" a failure, and
+    # the `|| true` that would need masks a broken pipeline too.
+    refs="$("${recorded_paths}" "${file}" | sed -n '\#^/nix/store/#p' | sort -u)"
+    if [ -n "${refs}" ]; then
+        leaked=$((leaked + 1))
+        echo "::error file=${file}::references the Nix store at run time"
+        echo "${file}"
+        echo "${refs}" | sed 's/^/    /'
+    fi
+done < <(find "$1" -type f \( -perm -u+x -o -name '*.dylib' -o -name '*.so*' \))
+
+echo "$1: checked ${checked}, skipped ${skipped}, ${leaked} with Nix store references."
+
+if [ "${leaked}" -ne 0 ]; then
+    cat >&2 <<'EOF'
+
+Fixes, in order of preference:
+  - A Conan package built before this check existed: drop it
+    (`conan remove '<name>/*'`) and rebuild.
+  - A binary that should have been retargeted to the system loader: check that
+    cmake/PatchNixBinary.cmake ran for it.
+  - Link the macOS system library instead of the Nix one - see
+    libresolvSystemStub in nix/darwin.nix.
+  - No system library exists (libstdc++): link it statically.
+  - None of the above: pin the toolchain into the package ID, following
+    `user.package:libc_version` in conan/profiles/ci.
+EOF
+    exit 1
+fi

bin/check-tools.sh

@@ -15,10 +15,14 @@
 #   - Windows: the core build tools only (CMake, Conan, Git, Python).
 #              MSVC is expected to be provided separately and is not checked here.
 #
-# Some tools (clang-format, doxygen, gcovr, gh, git-cliff, gpg, pre-commit,
-# run-clang-tidy) are present in our Linux CI images and in local development
-# setups, but not in the macOS CI environment. They are checked everywhere
-# except when running in CI on macOS.
+# Some tools (clang-format, clang-tidy, doxygen, gcovr, gh, git-cliff, gpg,
+# pre-commit, run-clang-tidy) are present in our Linux CI images and in local
+# development setups, but not in the macOS CI environment. They are checked
+# everywhere except when running in CI on macOS.
+#
+# Tools that Nix also exposes under a version-suffixed name (`clang-tidy-22`,
+# `g++-15`, ...) are probed under both names: a suffixed name can break while
+# the plain one still works (see mkVersionedToolLinks in nix/packages.nix).
 #
 # Environment variables:
 #   CI                      if set, skip the tools above when on macOS.
@@ -26,14 +30,27 @@
 
 set -uo pipefail
 
+# Version suffixes of the Nix tool links, tracking nix/packages.nix.
+gcc_version=15
+llvm_version=22
+
 missing=()
 checked=0
 
+# tool_path <name>
+# Fully resolved path of a tool, so the snapshots record which derivation
+# provides it. Prints nothing when it isn't on PATH.
+tool_path() {
+    local path
+    path="$(command -v "$1" 2>/dev/null)" || return 0
+    readlink -f "${path}" 2>/dev/null || printf '%s' "${path}"
+}
+
 # check <name> [probe-command...]
 # Runs the probe (default: "<name> --version"), capturing both stdout and
-# stderr, and prints one aligned line: the status, the name, and the first
-# non-blank line of the probe output (its version). Records <name> as missing
-# if the command is not found or exits non-zero.
+# stderr, and prints three lines: the status and name, the first non-blank line
+# of the probe output (its version, or the error when it failed), and the tool's
+# resolved path. Records <name> as missing if it is not found or exits non-zero.
 check() {
     local name="$1"
     shift
@@ -43,14 +60,17 @@ check() {
     fi
 
     checked=$((checked + 1))
-    local output version
+    local output version path
+    path="$(tool_path "${name}")"
     if output="$("${probe[@]}" 2>&1)"; then
-        version="$(printf '%s\n' "${output}" | grep -m1 '[^[:space:]]' || true)"
-        printf '  [ ok ] %-20s %s\n' "${name}" "${version}"
+        printf '  ✅ %s\n' "${name}"
     else
-        printf '  [MISS] %s\n' "${name}"
+        printf '  ❌ %s\n' "${name}"
         missing+=("${name}")
     fi
+    version="$(printf '%s\n' "${output}" | grep -m1 '[^[:space:]]' || true)"
+    printf '     %s\n' "${version:-(no output)}"
+    printf '     %s\n' "${path:-(not found)}"
 }
 
 case "$(uname -s)" in
@@ -82,7 +102,9 @@ if [ "${os}" = "linux" ] || [ "${os}" = "macos" ]; then
     echo "Development tooling:"
     check ccache
     check clang
+    check "clang-${llvm_version}"
     check clang++
+    check "clang++-${llvm_version}"
     check ClangBuildAnalyzer
     check curl
     check file
@@ -101,7 +123,14 @@ if [ "${os}" = "linux" ] || [ "${os}" = "macos" ]; then
     # setups, but not in the macOS CI environment. So check them everywhere
     # except when running in CI on macOS.
     if [ "${os}" = "linux" ] || [ -z "${CI:-}" ]; then
+        check clang-apply-replacements
+        check "clang-apply-replacements-${llvm_version}"
         check clang-format
+        check "clang-format-${llvm_version}"
+        # clang-tidy leads --version with the LLVM banner, not the version.
+        tidy_probe="--version | grep -m1 -oE 'LLVM version [0-9.]+'"
+        check clang-tidy sh -c "clang-tidy ${tidy_probe}"
+        check "clang-tidy-${llvm_version}" sh -c "clang-tidy-${llvm_version} ${tidy_probe}"
         check dot
         check doxygen
         check gcovr
@@ -112,6 +141,7 @@ if [ "${os}" = "linux" ] || [ "${os}" = "macos" ]; then
         # pre-commit, or its alternative implementation prek
         check pre-commit sh -c 'pre-commit --version || prek --version'
         check run-clang-tidy run-clang-tidy --help
+        check "run-clang-tidy-${llvm_version}" "run-clang-tidy-${llvm_version}" --help
     fi
 fi
 
@@ -126,7 +156,7 @@ if [ "${os}" = "linux" ] || [ "${os}" = "macos" ]; then
     check cargo-audit cargo audit --version
     check cargo-llvm-cov cargo llvm-cov --version
     check cargo-nextest cargo nextest --version
-    check clippy clippy-driver --version
+    check clippy-driver
     check rust-analyzer
     check rustc
     check rustfmt
@@ -138,7 +168,11 @@ if [ "${os}" = "linux" ]; then
     echo
     echo "GCC toolchain:"
     check gcc
+    check "gcc-${gcc_version}"
     check g++
+    check "g++-${gcc_version}"
+    check cpp
+    check "cpp-${gcc_version}"
     check gcov
 
     echo
@@ -163,9 +197,9 @@ else
     checked=$((checked + 1))
     tmp_clone="$(mktemp -d)"
     if git clone --depth 1 https://github.com/XRPLF/actions.git "${tmp_clone}/actions" >/dev/null 2>&1; then
-        printf '  [ ok ] git clone over HTTPS\n'
+        printf '  ✅ git clone over HTTPS\n'
     else
-        printf '  [MISS] git clone over HTTPS\n'
+        printf '  ❌ git clone over HTTPS\n'
         missing+=("git-https-clone")
     fi
     rm -rf "${tmp_clone}"
@@ -173,9 +207,9 @@ fi
 
 echo
 if [ "${#missing[@]}" -eq 0 ]; then
-    echo "All ${checked} checked tools are present and runnable."
+    echo "✅ All ${checked} checked tools are present and runnable."
 else
-    echo "Missing or non-functional tools (${#missing[@]} of ${checked}):" >&2
+    echo "❌ Missing or non-functional tools (${#missing[@]} of ${checked}):" >&2
     for tool in "${missing[@]}"; do
         echo "  - ${tool}" >&2
     done

bin/install-packaging-tools.sh

@@ -22,6 +22,16 @@ case "${ID}" in
         ;;
 esac
 
+# Packaging runs in a vanilla distro image, so the tooling comes from the distro's
+# archive rather than from nixpkgs:
+#
+#   - debhelper and dpkg-dev build the DEB
+#   - rpm-build builds the RPM, with systemd-rpm-macros and redhat-rpm-config
+#     supplying the systemd and find-debuginfo macros the spec uses
+#   - rpm-sign and gnupg2 sign the built RPM
+#   - python3 runs the packaging scripts
+#   - git gives build_pkg.py the commit timestamp it stamps files with
+#   - ca-certificates lets git and the packaging scripts verify TLS
 function install() {
     case "${ID}" in
         debian | ubuntu)
@@ -31,14 +41,18 @@ function install() {
                 debhelper \
                 debhelper-compat \
                 dpkg-dev \
-                git
+                git \
+                python3
             ;;
 
         rhel | centos | rocky | almalinux)
             dnf install -y --setopt=install_weak_deps=False \
                 git \
-                rpm-build \
+                gnupg2 \
+                python3 \
                 redhat-rpm-config \
+                rpm-build \
+                rpm-sign \
                 systemd-rpm-macros
             ;;
     esac

cfg/xrpld-example.cfg

@@ -1094,8 +1094,8 @@
 #                           Default is 100.
 #
 #       back_off_milliseconds
-#                           Number of milliseconds to wait between
-#                           online_delete batches to allow other functions
+#                           Number of milliseconds to wait between online_delete
+#                           SQL deletion batches to allow other functions
 #                           to catch up.
 #                           Default is 100.
 #
@@ -1109,10 +1109,22 @@
 #                           The online delete process checks periodically
 #                           that xrpld is still in sync with the network,
 #                           and that the validated ledger is less than
-#                           'age_threshold_seconds' old. If not, then continue
+#                           'age_threshold_seconds' old, and that all
+#                           recent ledgers are available. If not, then continue
 #                           sleeping for this number of seconds and
 #                           checking until healthy.
-#                           Default is 5.
+#                           Default is 2.
+#
+#       max_waiting_ledgers
+#                           The maximum number of ledgers that may be validated
+#                           while online deletion is waiting for the node to get
+#                           fully synced with the rest of the network. If more than
+#                           this number of ledgers are validated while waiting, then
+#                           online deletion gives up on the current ledger and tries
+#                           again later. Note this only affects situations that cause
+#                           rotation to wait, such as going out of sync, or missing
+#                           ledgers. Forward progress is not penalized. Minimum is 64.
+#                           Default is the online_delete value.
 #
 #   Notes:
 #       The 'node_db' entry configures the primary, persistent storage.

cmake/XrplCompiler.cmake

@@ -120,7 +120,10 @@ if(MSVC)
             _SILENCE_ALL_CXX17_DEPRECATION_WARNINGS
             $<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:Debug>>:_CRTDBG_MAP_ALLOC>
     )
-    target_link_libraries(common INTERFACE -errorreport:none -machine:X64)
+    target_link_libraries(
+        common
+        INTERFACE -errorreport:none -machine:X64 -ignore:4099
+    )
 else()
     target_compile_options(
         common
@@ -266,10 +269,50 @@ elseif(use_lld)
     )
     if("${LD_VERSION}" MATCHES "LLD")
         target_link_libraries(common INTERFACE -fuse-ld=lld)
+        # remembered for the linker flag probe below
+        set(fuse_ld_flag "-fuse-ld=lld")
     endif()
     unset(LD_VERSION)
 endif()
 
+# Linker warnings are errors where we control the toolchain and the dependencies: CI and the Nix dev shell.
+# On non-Nix macOS we suppress the deployment target warning: an old Conan profile may not pin os.version.
+# Only the new Apple linker understands the flag, so probe the actual linker (lld may be selected above).
+if(is_macos OR is_linux)
+    if(is_ci OR is_nix_compiler)
+        if(is_macos)
+            set(fatal_warnings_flag "-Wl,-fatal_warnings")
+        else()
+            set(fatal_warnings_flag "-Wl,--fatal-warnings")
+        endif()
+        message(
+            STATUS
+            "Treating all linker warnings as errors (${fatal_warnings_flag})"
+        )
+        target_link_options(common INTERFACE "${fatal_warnings_flag}")
+        unset(fatal_warnings_flag)
+    elseif(is_macos)
+        set(silence_flag "-Wl,-deployment_target_mismatches,suppress")
+        set(probe_flags ${fuse_ld_flag} "${silence_flag}")
+        include(CheckLinkerFlag)
+        check_linker_flag(
+            CXX
+            "${probe_flags}"
+            have_deployment_target_mismatches
+        )
+        if(have_deployment_target_mismatches)
+            message(
+                STATUS
+                "Silencing macOS deployment target mismatch warnings (${silence_flag})"
+            )
+            target_link_options(common INTERFACE "${silence_flag}")
+        endif()
+        unset(probe_flags)
+        unset(silence_flag)
+    endif()
+endif()
+unset(fuse_ld_flag)
+
 if(assert)
     foreach(var_ CMAKE_C_FLAGS_RELEASE CMAKE_CXX_FLAGS_RELEASE)
         string(REGEX REPLACE "[-/]DNDEBUG" "" ${var_} "${${var_}}")

cmake/XrplCore.cmake

@@ -51,6 +51,8 @@ target_compile_options(
 
 target_link_libraries(xrpl.libpb PUBLIC protobuf::libprotobuf gRPC::grpc++)
 
+add_dependencies(tidy_prerequisites xrpl.libpb)
+
 # TODO: Clean up the number of library targets later.
 add_library(xrpl.imports.main INTERFACE)
 

cmake/XrplCov.cmake

@@ -44,6 +44,7 @@ setup_target_for_coverage_gcovr(
     EXCLUDE
         "src/test"
         "src/tests"
+        "src/benchmarks"
         "include/xrpl/beast/test"
         "include/xrpl/beast/unit_test"
         "${CMAKE_BINARY_DIR}/pb-xrpl.libpb"

cmake/XrplPackaging.cmake

@@ -1,7 +1,7 @@
 #[===================================================================[
    Linux packaging support: 'package' target.
 
-   The packaging script (package/build_pkg.sh) installs to FHS-standard
+   The packaging script (package/build_pkg.py) installs to FHS-standard
    paths (/usr/bin, /etc/xrpld, etc.) regardless of CMAKE_INSTALL_PREFIX,
    so no prefix guard is needed here.
 #]===================================================================]
@@ -38,19 +38,20 @@ if(NOT TARGET validator-keys)
     return()
 endif()
 
-set(package_env
-    SRC_DIR=${CMAKE_SOURCE_DIR}
-    BUILD_DIR=${CMAKE_BINARY_DIR}
-    PKG_RELEASE=${pkg_release}
-)
+if(DPKG_BUILDPACKAGE_EXECUTABLE)
+    set(pkg_type deb)
+else()
+    set(pkg_type rpm)
+endif()
 
 add_custom_target(
     package
     COMMAND
-        ${CMAKE_COMMAND} -E env ${package_env}
-        ${CMAKE_SOURCE_DIR}/package/build_pkg.sh
+        ${CMAKE_SOURCE_DIR}/package/build_pkg.py --package-type=${pkg_type}
+        --build-dir=${CMAKE_BINARY_DIR} --pkg-release=${pkg_release}
+        --channel=UNRELEASED
     WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
     DEPENDS xrpld validator-keys
-    COMMENT "Building Linux package (deb/rpm inferred from host tooling)"
+    COMMENT "Building Linux ${pkg_type} package"
     VERBATIM
 )

cmake/XrplSettings.cmake

@@ -32,6 +32,11 @@ endif()
 
 option(benchmark "Build benchmarks" ON)
 
+# When OFF, the crates directory is not added to the build at all: no Rust
+# toolchain is required, no cxxbridge bindings are generated, and the C++ tests
+# that consume those bindings are left out of the build tree.
+option(rust "Build the Rust crates and the C++ code that depends on them" OFF)
+
 # Enabled by default so every header is compiled on its own as the main file of
 # its own compile_commands.json entry - this is what lets clang-tidy (and clangd
 # and IDEs) analyse a header's own includes directly. The per-header objects are

cmake/scripts/codegen/generate_tx_classes.py

@@ -8,6 +8,7 @@ Uses pcpp to preprocess the macro file and pyparsing to parse the DSL.
 
 import io
 import argparse
+import re
 from pathlib import Path
 import pyparsing as pp
 
@@ -53,28 +54,89 @@ def create_transaction_parser():
     return macro_parser
 
 
+# Defaults for xrpl::TxSettings members, mirroring
+# include/xrpl/protocol/TxSettings.h. A transaction's settings blob only names
+# the members that differ from these.
+SETTING_DEFAULTS = {
+    "delegable": "Delegation::NotDelegable",
+    "amendment": "uint256{}",
+    "privileges": "Privilege::NoPriv",
+}
+
+
+def parse_settings(settings_str):
+    """Parse a TxSettings blob into a dict, filling in defaults.
+
+    Args:
+        settings_str: A string like '({.delegable = Delegation::NotDelegable,
+                      .privileges = Privilege::CreateAcct})', or '({})'.
+
+    Returns:
+        A dict with a value for every key in SETTING_DEFAULTS.
+    """
+    body = settings_str.strip()
+    if not (body.startswith("(") and body.endswith(")")):
+        raise ValueError(
+            f"Malformed settings blob, expected '({{...}})': {settings_str!r}"
+        )
+    body = body[1:-1].strip()
+    if not (body.startswith("{") and body.endswith("}")):
+        raise ValueError(
+            f"Malformed settings blob, expected '({{...}})': {settings_str!r}"
+        )
+    body = body[1:-1]
+
+    # Strip comments, which may be interleaved with the designated initializers.
+    body = re.sub(r"//[^\n]*", "", body)
+
+    settings = dict(SETTING_DEFAULTS)
+    seen = set()
+    # Each entry runs from '.key =' up to the next '.key =' or the end.
+    for key, value in re.findall(
+        r"\.(\w+)\s*=\s*(.*?)(?=,\s*\.\w+\s*=|,?\s*$)", body, re.S
+    ):
+        if key not in SETTING_DEFAULTS:
+            raise ValueError(f"Unknown TxSettings member '.{key}' in {settings_str!r}")
+        settings[key] = " ".join(value.split()).rstrip(",")
+        seen.add(key)
+
+    # Catch a typo'd or unparsed initializer rather than silently defaulting it.
+    # Every '.member' in the blob must have been consumed above.
+    if len(re.findall(r"\.\w+", body)) != len(seen):
+        raise ValueError(f"Could not parse every setting in {settings_str!r}")
+
+    # A blob with content but no designated initializer is positional, which
+    # would otherwise be read as "all defaults" and silently generate the
+    # wrong output.
+    if body.strip() and not seen:
+        raise ValueError(
+            "TxSettings requires designated initializers (.member = value), "
+            f"got {settings_str!r}"
+        )
+
+    return settings
+
+
 def parse_transaction_args(args_list):
     """Parse the arguments of a TRANSACTION macro call.
 
     Args:
         args_list: A list of parsed arguments from pyparsing, e.g.,
-                   ['ttPAYMENT', '0', 'Payment', 'Delegation::delegable',
-                    'uint256{}', 'createAcct', '({...})']
+                   ['ttPAYMENT', '0', 'Payment',
+                    '({.privileges = Privilege::CreateAcct})', '({...})']
 
     Returns:
         A dict with parsed transaction information.
     """
-    if len(args_list) < 7:
+    if len(args_list) < 5:
         raise ValueError(
-            f"Expected at least 7 parts in TRANSACTION, got {len(args_list)}: {args_list}"
+            f"Expected at least 5 parts in TRANSACTION, got {len(args_list)}: {args_list}"
         )
 
     tag = args_list[0]
     value = args_list[1]
     name = args_list[2]
-    delegable = args_list[3]
-    amendments = args_list[4]
-    privileges = args_list[5]
+    settings = parse_settings(args_list[3])
     fields_str = args_list[-1]
 
     # Parse fields: ({field1, field2, ...})
@@ -84,9 +146,9 @@ def parse_transaction_args(args_list):
         "tag": tag,
         "value": value,
         "name": name,
-        "delegable": delegable,
-        "amendments": amendments,
-        "privileges": privileges,
+        "delegable": settings["delegable"],
+        "amendments": settings["amendment"],
+        "privileges": settings["privileges"],
         "fields": fields,
     }
 

conan.lock

@@ -23,6 +23,7 @@
         "fast_float/8.2.10#f6f28d6bb22112078e7dbda611caf681%1782494504.298",
         "ed25519/2015.03#ae761bdc52730a843f0809bdf6c1b1f6%1782307148.15562",
         "date/3.0.4#862e11e80030356b53c2c38599ceb32b%1782392402.538492",
+        "corrosion/0.6.1#bfa292df0a957bc70a450ff316cd9435%1786119416.131296",
         "c-ares/1.34.6#545240bb1c40e2cacd4362d6b8967650%1782392402.681654",
         "bzip2/1.0.8#c470882369c2d95c5c77e970c0c7e321%1782392402.296732",
         "boost/1.91.0#ea540ca2133d831b560036aa24dece3c%1782392419.475605",

conan/init.sh

@@ -0,0 +1,21 @@
+#!/usr/bin/env bash
+# Install our Conan configuration, profiles and the xrplf remote into CONAN_HOME.
+# Safe to re-run; never deletes the Conan home.
+
+set -euo pipefail
+
+SCRIPT_DIR="$(cd -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd)"
+CONAN_DIR="$(conan config home)"
+
+echo "Installing Conan configuration into ${CONAN_DIR}"
+conan config install "${SCRIPT_DIR}/global.conf"
+conan config install "${SCRIPT_DIR}/profiles" -tf "${CONAN_DIR}/profiles"
+# This script manages these files, so make them read-only - Conan does not
+# preserve the source mode. Only the files: the directories must stay writable
+# for `conan config install` to replace them.
+chmod a-w "${CONAN_DIR}/global.conf"
+find "${CONAN_DIR}/profiles" -type f -exec chmod a-w {} +
+
+echo "Adding the xrplf Conan remote"
+# --index 0: our patched recipes must win over Conan Center.
+conan remote add --index 0 --force xrplf https://conan.xrplf.org/repository/conan/

conan/profiles/default

@@ -1,10 +1,7 @@
 {% set os = detect_api.detect_os() %}
 {% set arch = detect_api.detect_arch() %}
 {% set compiler, version, compiler_exe = detect_api.detect_default_compiler() %}
-{% set compiler_version = version %}
-{% if os == "Linux" %}
 {% set compiler_version = detect_api.default_compiler_version(compiler, version) %}
-{% endif %}
 {% if os == "Macos" %}
 {# Minimum macOS the dependencies target. #}
 {# Without this, Conan builds each dependency against the (possibly newer) host SDK, so the #}

conanfile.py

@@ -28,6 +28,7 @@ class Xrpl(ConanFile):
     }
 
     requires = [
+        "corrosion/0.6.1",
         "ed25519/2015.03",
         "fast_float/8.2.10",
         "grpc/1.81.1",

crates/.cargo/config.toml

@@ -0,0 +1,17 @@
+# The Rust static libraries are linked into C++ targets, so the runtime linkage
+# here has to match what the C++ build uses (see cmake/XrplCompiler.cmake).
+#
+# macOS needs nothing: AppleClang cannot link libgcc/libc++ statically, so the
+# C++ build skips those flags on Apple as well.
+
+# Both amd64 and arm64 Linux builds link libgcc statically. This only affects
+# links that rustc itself drives (`cargo test` binaries and the like) — the
+# `staticlib` crates consumed by CMake are archived, not linked, so rustc
+# silently ignores link args for them. Keeping libgcc_s.so.1 off the xrpld link
+# line is handled in crates/CMakeLists.txt instead.
+[target.'cfg(target_os = "linux")']
+rustflags = ["-C", "link-args=-static-libgcc"]
+
+# Windows builds use the static MSVC runtime.
+[target.'cfg(windows)']
+rustflags = ["-C", "target-feature=+crt-static"]

crates/CMakeLists.txt

@@ -0,0 +1,104 @@
+find_package(Corrosion REQUIRED)
+
+corrosion_import_crate(MANIFEST_PATH ${CMAKE_CURRENT_SOURCE_DIR}/Cargo.toml)
+
+# The generated C++ lands in the build tree, so put a .clang-tidy next to it to
+# keep clang-tidy from analyzing code we don't own.
+configure_file(
+    generated.clang-tidy
+    "${CMAKE_CURRENT_BINARY_DIR}/.clang-tidy"
+    COPYONLY
+)
+
+add_custom_target(xrpl_crates)
+add_dependencies(tidy_prerequisites xrpl_crates)
+
+# On macOS, ld warns `ignoring duplicate libraries` when linking a crate.
+# Corrosion is the source of both duplicates it names:
+#
+# * The crate archive and its cxxbridge archive, because
+#   `corrosion_add_cxxbridge` makes the two depend on each other, and CMake
+#   repeats a static library cycle on the link line so single-pass linkers can
+#   resolve it. (LINK_INTERFACE_MULTIPLICITY can only raise that count.)
+# * `-lSystem`, which Corrosion copies from rustc's `native-static-libs` even
+#   though the compiler driver always links libSystem.
+#
+# ld needs neither: it resolves the cycle from one copy of each archive and
+# links libSystem once. So silence the warning rather than rewrite Corrosion's
+# link interface, which the cycle is also part of. The option itself is old —
+# Xcode 15 is only where the warning became the default — and the check below
+# leaves it out on a linker that does not know it.
+if(is_macos)
+    include(CheckLinkerFlag)
+    check_linker_flag(
+        CXX
+        -Wl,-no_warn_duplicate_libraries
+        have_no_warn_duplicate_libraries
+    )
+endif()
+
+function(_unlink_libgcc_s crate)
+    if(NOT (is_linux AND static))
+        return()
+    endif()
+
+    # Corrosion exposes a crate's staticlib as an imported `<crate>-static`
+    # target and puts the native libs in its INTERFACE_LINK_LIBRARIES. If either
+    # of those changes, warn instead of silently letting libgcc_s.so.1 return.
+    set(imported "${crate}-static")
+    if(NOT TARGET ${imported})
+        message(
+            FATAL_ERROR
+            "Corrosion did not create the imported target '${imported}', so "
+            "libgcc_s cannot be removed from the link interface of '${crate}'. "
+            "xrpld will link libgcc_s.so.1 dynamically. Check where Corrosion "
+            "${CORROSION_VERSION} now records `native-static-libs`."
+        )
+        return()
+    endif()
+
+    get_target_property(libs ${imported} INTERFACE_LINK_LIBRARIES)
+    if(NOT "gcc_s" IN_LIST libs)
+        message(
+            WARNING
+            "'gcc_s' was not in the link interface of '${imported}' as "
+            "expected. If the Rust toolchain stopped reporting it this "
+            "workaround is obsolete and can be deleted; otherwise xrpld may "
+            "link libgcc_s.so.1 dynamically. Verify with: "
+            "objdump -p xrpld | grep NEEDED"
+        )
+        return()
+    endif()
+
+    list(REMOVE_ITEM libs gcc_s)
+    set_property(TARGET ${imported} PROPERTY INTERFACE_LINK_LIBRARIES ${libs})
+endfunction()
+
+function(add_xrpl_crate name)
+    cmake_parse_arguments(ARG "" "CRATE" "FILES" ${ARGN})
+    _unlink_libgcc_s(${ARG_CRATE})
+    # `cc` picks its runtime flag from `crt-static` alone, so it compiles a
+    # crate's C++ with `-MT`; Debug needs `-MTd` (to match cmake/XrplCompiler.cmake).
+    if(is_msvc)
+        corrosion_set_env_vars(
+            ${ARG_CRATE}
+            "$<$<CONFIG:Debug>:CXXFLAGS=-MTd>"
+        )
+    endif()
+    corrosion_add_cxxbridge(${name}_cxxbridge CRATE ${ARG_CRATE} FILES
+                            ${ARG_FILES}
+    )
+    # Generated cxxbridge headers don't exist at configure time; CMake 3.28+
+    # validates INTERFACE_SOURCES on consuming targets. Clear it to skip the
+    # existence check — build-time ordering is enforced by the custom commands.
+    set_target_properties(${name}_cxxbridge PROPERTIES INTERFACE_SOURCES "")
+    if(have_no_warn_duplicate_libraries)
+        target_link_options(
+            ${name}_cxxbridge
+            INTERFACE -Wl,-no_warn_duplicate_libraries
+        )
+    endif()
+    add_dependencies(xrpl_crates ${name}_cxxbridge)
+endfunction()
+
+add_xrpl_crate(rs_hello_world CRATE rs_hello_world FILES lib.rs)

crates/Cargo.lock

@@ -0,0 +1,301 @@
+# This file is automatically @generated by Cargo.
+# It is not intended for manual editing.
+version = 4
+
+[[package]]
+name = "anstyle"
+version = "1.0.14"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "940b3a0ca603d1eade50a4846a2afffd5ef57a9feac2c0e2ec2e14f9ead76000"
+
+[[package]]
+name = "cc"
+version = "1.2.61"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "d16d90359e986641506914ba71350897565610e87ce0ad9e6f28569db3dd5c6d"
+dependencies = [
+ "find-msvc-tools",
+ "shlex",
+]
+
+[[package]]
+name = "clap"
+version = "4.6.1"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "1ddb117e43bbf7dacf0a4190fef4d345b9bad68dfc649cb349e7d17d28428e51"
+dependencies = [
+ "clap_builder",
+]
+
+[[package]]
+name = "clap_builder"
+version = "4.6.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "714a53001bf66416adb0e2ef5ac857140e7dc3a0c48fb28b2f10762fc4b5069f"
+dependencies = [
+ "anstyle",
+ "clap_lex",
+ "strsim",
+]
+
+[[package]]
+name = "clap_lex"
+version = "1.1.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "c8d4a3bb8b1e0c1050499d1815f5ab16d04f0959b233085fb31653fbfc9d98f9"
+
+[[package]]
+name = "codespan-reporting"
+version = "0.13.1"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "af491d569909a7e4dee0ad7db7f5341fef5c614d5b8ec8cf765732aba3cff681"
+dependencies = [
+ "serde",
+ "termcolor",
+ "unicode-width",
+]
+
+[[package]]
+name = "cxx"
+version = "1.0.199"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "824894a4a85dca76d4c95c2b9098c036f5a29f627b30c12780774f6654e60974"
+dependencies = [
+ "cc",
+ "cxx-build",
+ "cxxbridge-cmd",
+ "cxxbridge-flags",
+ "cxxbridge-macro",
+ "foldhash",
+ "link-cplusplus",
+]
+
+[[package]]
+name = "cxx-build"
+version = "1.0.199"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "f1ae0b651ea5b0000b19513aef5a03f194d7e3486f2d9258b658da8677fe9036"
+dependencies = [
+ "cc",
+ "codespan-reporting",
+ "indexmap",
+ "proc-macro2",
+ "quote",
+ "scratch",
+ "syn 3.0.3",
+]
+
+[[package]]
+name = "cxxbridge-cmd"
+version = "1.0.199"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "fb05f91d3fb8435d9bab6ac5ce6ac1868be774325fb7fb2a91be39393b21388e"
+dependencies = [
+ "clap",
+ "codespan-reporting",
+ "indexmap",
+ "proc-macro2",
+ "quote",
+ "syn 3.0.3",
+]
+
+[[package]]
+name = "cxxbridge-flags"
+version = "1.0.199"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "bf293202e0e3e98495785745389e8d0755b217e66f19194a5c695c25e03282ef"
+
+[[package]]
+name = "cxxbridge-macro"
+version = "1.0.199"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "ca001d746947c7249ed9d332a10f7a59daedbafeb0ec68c5c18a7db7a93f6ccc"
+dependencies = [
+ "indexmap",
+ "proc-macro2",
+ "quote",
+ "syn 3.0.3",
+]
+
+[[package]]
+name = "equivalent"
+version = "1.0.2"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "877a4ace8713b0bcf2a4e7eec82529c029f1d0619886d18145fea96c3ffe5c0f"
+
+[[package]]
+name = "find-msvc-tools"
+version = "0.1.9"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "5baebc0774151f905a1a2cc41989300b1e6fbb29aff0ceffa1064fdd3088d582"
+
+[[package]]
+name = "foldhash"
+version = "0.2.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "77ce24cb58228fbb8aa041425bb1050850ac19177686ea6e0f41a70416f56fdb"
+
+[[package]]
+name = "hashbrown"
+version = "0.17.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "4f467dd6dccf739c208452f8014c75c18bb8301b050ad1cfb27153803edb0f51"
+
+[[package]]
+name = "indexmap"
+version = "2.14.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "d466e9454f08e4a911e14806c24e16fba1b4c121d1ea474396f396069cf949d9"
+dependencies = [
+ "equivalent",
+ "hashbrown",
+]
+
+[[package]]
+name = "link-cplusplus"
+version = "1.0.12"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "7f78c730aaa7d0b9336a299029ea49f9ee53b0ed06e9202e8cb7db9bae7b8c82"
+dependencies = [
+ "cc",
+]
+
+[[package]]
+name = "proc-macro2"
+version = "1.0.106"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "8fd00f0bb2e90d81d1044c2b32617f68fcb9fa3bb7640c23e9c748e53fb30934"
+dependencies = [
+ "unicode-ident",
+]
+
+[[package]]
+name = "quote"
+version = "1.0.45"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "41f2619966050689382d2b44f664f4bc593e129785a36d6ee376ddf37259b924"
+dependencies = [
+ "proc-macro2",
+]
+
+[[package]]
+name = "rs-hello_world"
+version = "0.1.0"
+dependencies = [
+ "cxx",
+]
+
+[[package]]
+name = "scratch"
+version = "1.0.9"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "d68f2ec51b097e4c1a75b681a8bec621909b5e91f15bb7b840c4f2f7b01148b2"
+
+[[package]]
+name = "serde"
+version = "1.0.228"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "9a8e94ea7f378bd32cbbd37198a4a91436180c5bb472411e48b5ec2e2124ae9e"
+dependencies = [
+ "serde_core",
+ "serde_derive",
+]
+
+[[package]]
+name = "serde_core"
+version = "1.0.228"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "41d385c7d4ca58e59fc732af25c3983b67ac852c1a25000afe1175de458b67ad"
+dependencies = [
+ "serde_derive",
+]
+
+[[package]]
+name = "serde_derive"
+version = "1.0.228"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "d540f220d3187173da220f885ab66608367b6574e925011a9353e4badda91d79"
+dependencies = [
+ "proc-macro2",
+ "quote",
+ "syn 2.0.117",
+]
+
+[[package]]
+name = "shlex"
+version = "1.3.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "0fda2ff0d084019ba4d7c6f371c95d8fd75ce3524c3cb8fb653a3023f6323e64"
+
+[[package]]
+name = "strsim"
+version = "0.11.1"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "7da8b5736845d9f2fcb837ea5d9e2628564b3b043a70948a3f0b778838c5fb4f"
+
+[[package]]
+name = "syn"
+version = "2.0.117"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "e665b8803e7b1d2a727f4023456bbbbe74da67099c585258af0ad9c5013b9b99"
+dependencies = [
+ "proc-macro2",
+ "quote",
+ "unicode-ident",
+]
+
+[[package]]
+name = "syn"
+version = "3.0.3"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "53e9bae58849f64dfa4f5d5ae372c8341f7305f82a3868709269343628b659a3"
+dependencies = [
+ "proc-macro2",
+ "quote",
+ "unicode-ident",
+]
+
+[[package]]
+name = "termcolor"
+version = "1.4.1"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "06794f8f6c5c898b3275aebefa6b8a1cb24cd2c6c79397ab15774837a0bc5755"
+dependencies = [
+ "winapi-util",
+]
+
+[[package]]
+name = "unicode-ident"
+version = "1.0.24"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "e6e4313cd5fcd3dad5cafa179702e2b244f760991f45397d14d4ebf38247da75"
+
+[[package]]
+name = "unicode-width"
+version = "0.2.2"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "b4ac048d71ede7ee76d585517add45da530660ef4390e49b098733c6e897f254"
+
+[[package]]
+name = "winapi-util"
+version = "0.1.11"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "c2a7b1c03c876122aa43f3020e6c3c3ee5c05081c9a00739faf7503aeba10d22"
+dependencies = [
+ "windows-sys",
+]
+
+[[package]]
+name = "windows-link"
+version = "0.2.1"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "f0805222e57f7521d6a62e36fa9163bc891acd422f971defe97d64e70d0a4fe5"
+
+[[package]]
+name = "windows-sys"
+version = "0.61.2"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "ae137229bcbd6cdf0f7b80a31df61766145077ddf49416a728b02cb3921ff3fc"
+dependencies = [
+ "windows-link",
+]

crates/Cargo.toml

@@ -0,0 +1,15 @@
+[workspace]
+members = ["hello_world"]
+resolver = "3"
+
+[workspace.dependencies]
+cxx = { version = "1.0.198", features = ["c++20"] }
+
+[workspace.package]
+edition = "2024"
+
+[profile.release]
+opt-level = 3
+overflow-checks = true
+lto = true
+debug = true

crates/generated.clang-tidy

@@ -0,0 +1,10 @@
+---
+# Neutralizes clang-tidy for the corrosion/cxxbridge-generated C++. Copied into
+# the crates build directory by crates/CMakeLists.txt, next to the generated
+# sources, so clang-tidy picks it up instead of the top-level configuration.
+#
+# One check is kept enabled to avoid clang-tidy's "no checks enabled" error.
+Checks: "-*,google-readability-todo"
+WarningsAsErrors: ""
+HeaderFilterRegex: ""
+InheritParentConfig: false

crates/hello_world/Cargo.toml

@@ -0,0 +1,10 @@
+[package]
+name = "rs-hello_world"
+version = "0.1.0"
+edition.workspace = true
+
+[lib]
+crate-type = ["staticlib"]
+
+[dependencies]
+cxx.workspace = true

crates/hello_world/src/lib.rs

@@ -0,0 +1,10 @@
+#[cxx::bridge(namespace = "rs::hello_world")]
+mod ffi {
+    extern "Rust" {
+        fn hello_world() -> String;
+    }
+}
+
+pub fn hello_world() -> String {
+    "hello_world".to_string()
+}

docs/build/environment.md

@@ -6,22 +6,55 @@ This document explains how to set one up.
 
 ## Tested compiler versions
 
-`xrpld` is built in the **C++23** dialect by default.
-Make sure your toolchain is recent enough — the compiler versions currently tested in CI are:
+`xrpld` is built in the **C++23** dialect by default, so your toolchain has to
+support it — see [compiler support for C++23][cpp23-support].
+The versions currently tested in CI are:
 
-| Compiler    | Version |
-| ----------- | ------- |
-| GCC         | 15.2    |
-| Clang       | 22      |
-| Apple Clang | 17      |
-| MSVC        | 19.44   |
+| Compiler    | Version            |
+| ----------- | ------------------ |
+| GCC         | 15.2               |
+| Clang       | 22                 |
+| Apple Clang | 21                 |
+| MSVC        | Visual Studio 2026 |
 
 LLVM tools (`clang-tidy` and `clang-format`) are also pinned to version 22.
 
+### Older compilers
+
 Older compilers may fail to build the latest `develop` code: the codebase now
 relies on C++23 features and has been adjusted for `clang-tidy`.
 If the latest code doesn't build for you, update your build toolchain first.
 
+If updating isn't an option for you, we do accept pull requests that fix builds
+on older compilers, as long as the change is small and doesn't make the code
+harder to read. What we can't promise is that older compilers will keep working:
+only the versions in the table above are tested in CI, and we won't hold back
+the use of C++23 features or add invasive workarounds to keep an untested
+compiler building. Treat support for anything outside the table as best-effort.
+
+## Required tools
+
+Besides a compiler, building `xrpld` requires:
+
+| Tool                                        | Minimum version |
+| ------------------------------------------- | --------------- |
+| [Git](https://git-scm.com/downloads)        | any recent      |
+| [Python](https://www.python.org/downloads/) | 3.11            |
+| [Conan](https://conan.io/downloads.html)    | 2.17            |
+| [CMake](https://cmake.org/download/)        | 3.16            |
+
+On Linux and macOS, the [Nix development shell](./nix.md) provides all of them
+(see below). On Windows they have to be installed manually.
+
+Building with `-Drust=ON` additionally requires a Rust toolchain, see
+[Rust](#rust). A default build does not, so it is not in the table above.
+
+Once they are in place, verify that everything is installed and runnable with:
+
+```bash
+./bin/check-tools.sh
+```
+
 ## Linux and macOS
 
 The **recommended way** to get a development environment on Linux and macOS is
@@ -39,20 +72,15 @@ Clang. If you instead opt to use your system-wide Apple Clang (via
 below).
 
 See [Using the Nix development shell](./nix.md) for installation and usage
-details, including how to select a different compiler.
-
-> [!NOTE]
-> Using Nix is not mandatory. Any custom environment (Homebrew packages or
-> anything else) will continue to work, but then it is up to you to keep it in
-> sync with the environment used in CI. Nix unifies the development environment
-> for everyone and synchronizes updates, which is why we recommend it.
+details, including how to select a different compiler and why we recommend Nix
+over a hand-maintained environment.
 
 ### macOS: managing the Apple Clang version
 
 If you use your system-wide Apple Clang on macOS (via `nix develop .#apple-clang`),
 the compiler version is whatever your installed Xcode (or Command Line Tools)
 provides. The following command should return a version greater than or equal to
-the [minimum required](#tested-compiler-versions):
+the [tested one](#tested-compiler-versions):
 
 ```bash
 clang --version
@@ -89,23 +117,42 @@ building xrpld. You may want to install and pin a specific version of Xcode:
 Nix is not available on Windows, so the required tools have to be installed
 manually:
 
-- [Visual Studio 2022](https://visualstudio.microsoft.com/) with the
+- [Visual Studio 2026](https://visualstudio.microsoft.com/) with the
   **"Desktop development with C++"** workload — this provides MSVC and the
-  "x64 Native Tools Command Prompt".
+  "x64 Native Tools Command Prompt". CI configures CMake with the
+  `Visual Studio 18 2026` generator.
 - [Git for Windows](https://git-scm.com/download/win)
-- [Python 3.11](https://www.python.org/downloads/), or higher
-- [Conan 2.17](https://conan.io/downloads.html), or higher
-- [CMake 3.22](https://cmake.org/download/), or higher
+- Python, Conan, and CMake, at the versions listed in
+  [Required tools](#required-tools).
+- a [Rust toolchain](https://rustup.rs) — only needed to build with
+  `-Drust=ON`, see [Rust](#rust)
 
-> [!NOTE]
-> Windows is used for development only and is not recommended for production.
+## Rust
+
+The repository contains a Rust workspace in [`crates/`](../../crates), whose
+crates are exposed to C++ through [cxx](https://cxx.rs) bindings. It is **not**
+part of a default build: the CMake `rust` option is OFF by default, and with it
+off no Rust toolchain is needed. It is only required when configuring with
+`-Drust=ON` (which is what CI does), see [Options](../../BUILD.md#options).
+
+The toolchain (`cargo`, `rustc`) is pinned to the channel in
+[`rust-toolchain.toml`](../../rust-toolchain.toml) at the repository root. If
+you install Rust with [rustup](https://rustup.rs), that file is picked up
+automatically, and `cargo`/`rustc` in the repository will use the pinned
+version.
+
+Everything else the Rust build needs on the CMake side comes from Conan along
+with the rest of the dependencies, so there is nothing further to install.
 
 ## Clang-tidy
 
 `clang-tidy` is required to run static analysis checks locally (see
 [CONTRIBUTING.md](../../CONTRIBUTING.md)). It is not required to build the
-project. This project currently uses `clang-tidy` version 22.
+project. The version this project uses is listed in
+[Tested compiler versions](#tested-compiler-versions).
 
-On Linux and macOS, the [Nix development shell](./nix.md) provides `clang-tidy`
-22 out of the box — run it via `run-clang-tidy`. No separate installation is
-needed.
+On Linux and macOS, the [Nix development shell](./nix.md) provides that exact
+version out of the box — run it via `run-clang-tidy`. No separate installation
+is needed.
+
+[cpp23-support]: https://en.cppreference.com/w/cpp/compiler_support/23

docs/build/nix.md

@@ -7,7 +7,7 @@ This guide explains how to use Nix to set up a reproducible development environm
 ## Benefits of Using Nix
 
 - **Reproducible environment**: Everyone gets the same versions of tools and compilers
-- **Matches CI**: The Linux CI runs in Docker images built from this exact Nix environment
+- **Matches CI**: The Linux CI runs in Docker images built from this exact Nix environment, and CI builds some macOS configurations in it as well
 - **No system pollution**: Dependencies are isolated and don't affect your system packages
 - **Consistent compilers**: The GCC and Clang shells use the same versions as CI
 - **Quick setup**: Get started with a single command
@@ -68,7 +68,7 @@ A compiler can be chosen by providing its name with the `.#` prefix, e.g. `nix d
 
 On Linux, `.#gcc` and `.#clang` provide the exact toolchain CI uses:
 the compiler (pinned in [`nix/packages.nix`](../../nix/packages.nix))
-rebuilt against the pinned custom glibc (see [`nix/compilers.nix`](../../nix/compilers.nix)).
+rebuilt against the pinned custom glibc (see [`nix/linux.nix`](../../nix/linux.nix)).
 Building that toolchain the first time is slow unless it is fetched from a Nix binary cache.
 If you don't need the custom glibc, the Linux-only `.#gcc-plain` and `.#clang-plain`
 give you the stock nixpkgs compilers of the same versions.
@@ -120,7 +120,7 @@ nix develop -c "$SHELL"
 >
 > If it doesn't, either adjust your shell configuration so it doesn't override `$PATH`, or use [direnv](#automatic-activation-with-direnv) (below), which loads the environment _after_ your shell config and so takes precedence regardless of the shell you use.
 
-## Building xrpld with Nix
+## Building xrpld in the Nix shell
 
 Once inside the Nix development shell, follow the standard [build instructions](../../BUILD.md#steps). The Nix shell provides all necessary tools (CMake, Ninja, Conan, etc.).
 
@@ -128,6 +128,100 @@ Coverage builds (`-Dcoverage=ON`) work in the `gcc` shell (and `gcc-plain` on Li
 each ships a `gcov` matching its compiler, since Nix's cc-wrapper does not expose one.
 The `clang` shells do not include `llvm-cov`, so use a `gcc` shell for coverage.
 
+Builds of the Rust crates (`-Drust=ON`) also work out of the box: every shell
+provides the Rust toolchain pinned in
+[`rust-toolchain.toml`](../../rust-toolchain.toml) (see
+[Rust](./environment.md#rust)), plus the `cargo-audit`, `cargo-llvm-cov` and
+`cargo-nextest` plugins.
+
+## Conan configuration
+
+The shell runs [`conan/init.sh`](../../conan/init.sh) on entry, so
+[Set Up Conan](../../BUILD.md#set-up-conan) is already done for you. It installs
+into the shell's own Conan home: `CONAN_HOME=~/.conan2-nix`.
+
+### Prebuilt packages
+
+On **Linux**, the binaries on the `xrplf` remote are built in this same Nix
+environment — CI runs in Docker images that bundle the dev shell's toolchain (see
+[`nix/docker`](../../nix/docker)) — so `.#gcc` and `.#clang` can reuse them. The
+`-plain` shells do not match that toolchain's glibc, so binaries from the remote
+are not a reliable match there.
+
+On **macOS**, CI also builds in this Nix environment, in Debug and Release (the
+`macos-arm64-*-nix` configurations — Debug because the profile defaults to it).
+The Nix build resolves to `compiler=clang`, so it gets its own package IDs,
+separate from the Apple Clang ones. The
+[dependency upload](../../.github/workflows/upload-conan-deps.yml) publishes them
+on pushes to `develop` and on manual runs — its nightly run rebuilds everything
+from source but uploads nothing — so once a set has been published `nix develop`
+can reuse it instead of compiling every dependency locally. These configurations
+run outside the reduced pull-request matrix, so label a PR `Full CI build` when it
+touches `flake.lock` or `nix/`.
+
+To compile everything from source, add `--build '*'` to the `conan install`
+command.
+
+### Why the nixpkgs revision is not part of the package ID
+
+A Conan package ID records the compiler and its major version, but nothing about
+the nixpkgs revision the toolchain came from — and `flake.lock` moves far more
+often than the toolchain meaningfully changes, so folding it in would rebuild
+every dependency on every bump for nothing.
+
+That is safe as long as no cached artifact resolves a `/nix/store` path at run
+time, because store paths change on every update and the old ones disappear with
+`nix-collect-garbage`. With the `clang` toolchain macOS CI and the dev shell use,
+they do not: it links against `/usr/lib/libc++` and `/usr/lib/libSystem`, and
+store paths reach the `.a` files only through debug info, which nothing resolves
+at link or run time.
+
+> [!WARNING]
+> This does not hold for `nix develop .#gcc` on macOS. There is no system
+> libstdc++, so GCC links its own from the store and every binary keeps a
+> `/nix/store` reference. That shell is fine for tooling, but it is not a build
+> configuration CI covers, and no dependency binaries are published for it.
+
+This is checked rather than assumed.
+[`bin/check-nix-store-refs.sh`](../../bin/check-nix-store-refs.sh) takes one file
+or directory and fails if a binary under it resolves a store path at run time.
+CI runs it over the build output and the Conan cache, and again in the upload job
+before anything is published. You can run it yourself:
+
+```bash
+bin/check-nix-store-refs.sh build
+bin/check-nix-store-refs.sh ~/.conan2-nix
+```
+
+It works on Linux too, but asserts something narrower there: the toolchain always
+writes the store into `PT_INTERP` and `RUNPATH`, and CI builds inside an image
+whose store is fixed for its lifetime, so that is fine. Only the binaries
+[`PatchNixBinary.cmake`](../../cmake/PatchNixBinary.cmake) retargets to the
+system loader have to be clean, and those are what CI checks:
+
+```bash
+bin/check-nix-store-refs.sh build/xrpld
+```
+
+### The libresolv stub
+
+This is not hypothetical: `xrpld` used to be caught by it. The c-ares package
+tells the linker to pass `-lresolv`, and nixpkgs keeps `libresolv` out of the
+macOS SDK and ships it as an ordinary store dylib — so every Nix-built `xrpld`
+recorded a `/nix/store/…-libresolv-93/lib/libresolv.9.dylib` load command and
+stopped running once that path was collected. Nothing in the link uses a single
+symbol from it.
+
+Both environments now put a stub on the linker search path
+(`libresolvSystemStub` in [`nix/darwin.nix`](../../nix/darwin.nix)): the
+same library with its install name set to `/usr/lib/libresolv.9.dylib`, which is
+exactly the load command the Apple Clang build records.
+
+Package IDs did not change, so Conan keeps serving anything built before the
+stub landed. If a binary fails to start with `Library not loaded: /nix/store/…`,
+see [that entry](./nix_troubleshooting.md#library-not-loaded-nixstore-from-a-binary-that-used-to-work)
+in the troubleshooting guide.
+
 ## Automatic Activation with direnv
 
 [direnv](https://direnv.net/) or [nix-direnv](https://github.com/nix-community/nix-direnv) can automatically activate the Nix development shell when you enter the repository directory.
@@ -142,14 +236,6 @@ The repository already ships an `.envrc` at its root that activates the Nix flak
 > [!NOTE]
 > direnv only caches the `.direnv` directory (already listed in `.gitignore`); no other repository files are affected.
 
-## Conan and Prebuilt Packages
-
-Please note that there is no guarantee that binaries from conan cache will work when using nix. If you encounter any errors, please use `--build '*'` to force conan to compile everything from source:
-
-```bash
-conan install .. --output-folder . --build '*' --settings build_type=Release
-```
-
 ## Updating `flake.lock` file
 
 To update `flake.lock` to the latest revision use `nix flake update` command.

docs/build/nix_troubleshooting.md

@@ -131,3 +131,91 @@ once it picks up that rebuild, then re-run the `grep libgit2` check above to
 confirm it reports `1.9.4` or newer.
 
 Until then, prefer the workarounds above.
+
+## `wint_t` / `uint32_t` errors from the Nix libc++ headers
+
+A build that mixes the Nix toolchain with the system SDK fails in libc++ itself,
+with errors that look nothing like your code:
+
+```
+/nix/store/...-libcxx-.../include/c++/v1/cwchar:136:9: error: target of using declaration conflicts with declaration already in scope
+  136 | using ::wint_t _LIBCPP_USING_IF_EXISTS;
+/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/usr/include/sys/_types/_wint_t.h:32:25: note: target of using declaration
+...
+error: use of undeclared identifier 'UINT32_C'
+```
+
+The give-away is the second path: Nix's libc++ headers are being combined with
+the **Xcode Command Line Tools** SDK instead of the Nix one.
+
+### Why it happens
+
+`SDKROOT` and `DEVELOPER_DIR` are what point the toolchain at the Nix SDK, and
+they are not baked into the compiler — a dev shell gets them from the
+`apple-sdk` setup hook. CMake, finding neither, asks `xcrun`, which answers with
+the system SDK. Nix's `libc++` and Apple's headers then declare the same types
+twice.
+
+### Fix
+
+Run the build from inside the dev shell (`nix develop`), or from an environment
+that exports both variables. To confirm which SDK a configured build is using:
+
+```bash
+grep -o '\-isysroot [^ ]*' build/compile_commands.json | sort -u
+```
+
+It should print a `/nix/store/...-apple-sdk-*` path. If it prints
+`/Library/Developer/CommandLineTools/...`, re-configure from within the shell —
+CMake caches the sysroot, so an existing `build/` directory keeps the wrong one.
+
+## `Library not loaded: /nix/store/…` from a binary that used to work
+
+A binary stops starting after a `nix flake update`, or after
+`nix-collect-garbage` removes the paths the previous toolchain used:
+
+```
+dyld[57271]: Library not loaded: /nix/store/…-libresolv-93/lib/libresolv.9.dylib
+```
+
+[`bin/check-nix-store-refs.sh`](../../bin/check-nix-store-refs.sh) finds the same
+thing without having to run anything, and names the file:
+
+```
+$ bin/check-nix-store-refs.sh ~/.conan2-nix
+::error file=/Users/you/.conan2-nix/p/b/c-area24ded30c388c/p/bin/adig::references the Nix store at run time
+/Users/you/.conan2-nix/p/b/c-area24ded30c388c/p/bin/adig
+    /nix/store/p4lp3xq4imd1qzqh08x8vcq2zfhi7rca-libresolv-93/lib/libresolv.9.dylib
+/Users/you/.conan2-nix: checked 135, skipped 2495, 1 with Nix store references.
+```
+
+Conan's cache folders are named after a truncated package name plus a hash, so
+ask Conan which package the offending one belongs to — pass the folder holding
+the hash, not the file itself:
+
+```
+$ conan cache ref ~/.conan2-nix/p/b/c-area24ded30c388c
+c-ares/1.34.6#545240bb1c40e2cacd4362d6b8967650:dab5992496abe6d219defb7986ecbf367615a5e5#…
+```
+
+### Why it happens
+
+The binary records a store path that no longer exists. Nothing we build should:
+see [Prebuilt packages](./nix.md#prebuilt-packages) for why, and
+`libresolvSystemStub` in [`nix/darwin.nix`](../../nix/darwin.nix) for the one
+dependency that needed help to comply.
+
+A Conan package ID does not encode the nixpkgs revision, so a package built
+before that stub existed stays in your local cache and keeps being reused. The
+dev shell is also what tends to produce one: it is a slightly _less_ isolated
+build environment than CI's, because `mkShell` puts every tool's headers and
+libraries on the compiler's search path — which is how c-ares found the Nix
+`libresolv` in the first place.
+
+### Fix
+
+Drop that package and let Conan refetch or rebuild it:
+
+```bash
+conan remove 'c-ares/*'
+```

docs/install-legacy.md

@@ -1,3 +1,10 @@
+# Installing xrpld 3.3.0 and earlier
+
+> [!IMPORTANT]
+> These instructions apply to xrpld 3.3.0 and earlier, published to
+> repos.ripple.com.
+> For later releases see [install.md](./install.md).
+
 This document contains instructions for installing xrpld.
 The APT package manager is common on Debian-based Linux distributions like
 Ubuntu,
@@ -52,7 +59,7 @@ The default [prefix][1] is typically `/usr/local` on Linux and macOS and
 
 5.  Add the appropriate XRPL repository for your operating system version:
 
-        echo "deb [signed-by=/usr/local/share/keyrings/ripple-key.gpg] https://repos.ripple.com/repos/xrpld-deb focal stable" | \
+        echo "deb [signed-by=/usr/local/share/keyrings/ripple-key.gpg] https://repos.ripple.com/repos/rippled-deb focal stable" | \
             sudo tee -a /etc/apt/sources.list.d/ripple.list
 
     The above example is appropriate for **Ubuntu 20.04 Focal Fossa**. For other operating systems, replace the word `focal` with one of the following:
@@ -106,8 +113,8 @@ The default [prefix][1] is typically `/usr/local` on Linux and macOS and
         enabled=1
         gpgcheck=0
         repo_gpgcheck=1
-        baseurl=https://repos.ripple.com/repos/xrpld-rpm/stable/
-        gpgkey=https://repos.ripple.com/repos/xrpld-rpm/stable/repodata/repomd.xml.key
+        baseurl=https://repos.ripple.com/repos/rippled-rpm/stable/
+        gpgkey=https://repos.ripple.com/repos/rippled-rpm/stable/repodata/repomd.xml.key
         REPOFILE
 
     _Unstable_
@@ -118,8 +125,8 @@ The default [prefix][1] is typically `/usr/local` on Linux and macOS and
         enabled=1
         gpgcheck=0
         repo_gpgcheck=1
-        baseurl=https://repos.ripple.com/repos/xrpld-rpm/unstable/
-        gpgkey=https://repos.ripple.com/repos/xrpld-rpm/unstable/repodata/repomd.xml.key
+        baseurl=https://repos.ripple.com/repos/rippled-rpm/unstable/
+        gpgkey=https://repos.ripple.com/repos/rippled-rpm/unstable/repodata/repomd.xml.key
         REPOFILE
 
     _Nightly_
@@ -130,8 +137,8 @@ The default [prefix][1] is typically `/usr/local` on Linux and macOS and
         enabled=1
         gpgcheck=0
         repo_gpgcheck=1
-        baseurl=https://repos.ripple.com/repos/xrpld-rpm/nightly/
-        gpgkey=https://repos.ripple.com/repos/xrpld-rpm/nightly/repodata/repomd.xml.key
+        baseurl=https://repos.ripple.com/repos/rippled-rpm/nightly/
+        gpgkey=https://repos.ripple.com/repos/rippled-rpm/nightly/repodata/repomd.xml.key
         REPOFILE
 
 2.  Fetch the latest repo updates:

docs/install.md

@@ -0,0 +1,144 @@
+# Installing xrpld
+
+> [!NOTE]
+> These instructions apply to packages published from 2026-08-19 onwards.
+> For xrpld 3.3.0 and earlier see [install-legacy.md](./install-legacy.md).
+
+`xrpld` is published as DEB and RPM packages for 64-bit x86 Linux.
+Use APT on Debian-based distributions such as Debian and Ubuntu,
+and YUM on Red Hat-based distributions such as RHEL, AlmaLinux, and Rocky Linux.
+To build from source instead, see [BUILD.md](../BUILD.md).
+
+## Release channels
+
+Packages are published to four channels:
+
+- `stable` - production releases
+- `rc` - release candidates
+- `beta` - beta builds
+- `develop` - every push to the [`develop` branch](https://github.com/XRPLF/rippled/tree/develop)
+
+See [Publishing packages](../package/README.md#publishing-packages) for how channels are produced.
+
+The instructions below use `stable`.
+To follow another channel, replace `stable` with its name
+wherever it appears in the repository configuration.
+
+> [!WARNING]
+> Channels other than `stable` may be broken at any time.
+> Do not use them for production servers.
+
+## Install the xrpld package
+
+### With the APT package manager
+
+1.  Install utilities:
+
+    ```bash
+    sudo apt update -y
+    sudo apt install -y apt-transport-https ca-certificates curl gnupg
+    ```
+
+2.  Add the XRPL Foundation package-signing key to your list of trusted keys:
+
+    ```bash
+    sudo install -d -m 0755 /etc/apt/keyrings
+    sudo curl -fsS https://packages.xrplf.org/xrplf.asc -o /etc/apt/keyrings/xrplf.asc
+    ```
+
+3.  Check the fingerprint of the newly-added key:
+
+    ```bash
+    gpg --show-keys /etc/apt/keyrings/xrplf.asc
+    ```
+
+    The output should be:
+
+    ```text
+    pub   rsa4096 2026-08-18 [SC]
+          B655416741221F780FBCFBC9AA84D41A11D29FA9
+    uid                      XRPLF Packages <distribution@xrplf.org>
+    ```
+
+    In particular, make sure that the fingerprint matches.
+
+4.  Add the repository, using the channel you picked in [Release channels](#release-channels):
+
+    ```bash
+    echo "deb [signed-by=/etc/apt/keyrings/xrplf.asc] https://packages.xrplf.org/repository/deb-stable any main" | \
+        sudo tee /etc/apt/sources.list.d/xrplf.list
+    ```
+
+5.  Fetch the repository:
+
+    ```bash
+    sudo apt -y update
+    ```
+
+6.  Install the `xrpld` software package:
+
+    ```bash
+    sudo apt -y install xrpld
+    ```
+
+### With the YUM package manager
+
+1.  Add the XRPL Foundation package-signing key:
+
+    ```bash
+    sudo rpm --import https://packages.xrplf.org/xrplf.asc
+    ```
+
+2.  Add the repository, using the channel you picked in [Release channels](#release-channels):
+
+    ```bash
+    cat << 'REPOFILE' | sudo tee /etc/yum.repos.d/xrplf.repo
+    [xrplf-stable]
+    name=XRP Ledger Packages
+    enabled=1
+    baseurl=https://packages.xrplf.org/repository/rpm-stable/$basearch/
+    gpgcheck=1
+    repo_gpgcheck=1
+    gpgkey=https://packages.xrplf.org/xrplf.asc
+    REPOFILE
+    ```
+
+    `gpgcheck=1` verifies each package against the key above.
+    `repo_gpgcheck=1` verifies the repository metadata, which the server signs with the same key.
+
+3.  Install the `xrpld` package:
+
+    ```bash
+    sudo yum install -y xrpld
+    ```
+
+## The xrpld service
+
+Both package managers install a systemd unit and enable it, so `xrpld` starts on boot.
+Check whether it is already running:
+
+```bash
+systemctl status xrpld.service
+```
+
+The APT packages start it immediately as well; the YUM packages do not, so start it yourself:
+
+```bash
+sudo systemctl start xrpld.service
+```
+
+### Optional: binding to privileged ports
+
+To serve incoming API requests on port 80 or 443, grant the service the capability to bind them.
+You must also update the config file's port settings.
+
+```bash
+sudo install -d -m 0755 /etc/systemd/system/xrpld.service.d
+sudo tee /etc/systemd/system/xrpld.service.d/privileged-ports.conf >/dev/null <<'EOF'
+[Service]
+CapabilityBoundingSet=CAP_NET_BIND_SERVICE
+AmbientCapabilities=CAP_NET_BIND_SERVICE
+EOF
+sudo systemctl daemon-reload
+sudo systemctl restart xrpld.service
+```

docs/sample_chart.doc

@@ -1,24 +0,0 @@
-/*!
-    \page somestatechart Example state diagram
-
-    \startuml SomeState "my state diagram"
-    scale 600 width
-
-    [*] -> State1
-    State1 --> State2 : Succeeded
-    State1 --> [*] : Aborted
-    State2 --> State3 : Succeeded
-    State2 --> [*] : Aborted
-    state State3 {
-      state "Accumulate Enough Data\nLong State Name" as long1
-      long1 : Just a test
-      [*] --> long1
-      long1 --> long1 : New Data
-      long1 --> ProcessData : Enough Data
-    }
-    State3 --> State3 : Failed
-    State3 --> [*] : Succeeded / Save Result
-    State3 --> [*] : Aborted
-
-    \enduml
-*/

include/xrpl/basics/Archive.h

@@ -1,6 +1,6 @@
 #pragma once
 
-#include <boost/filesystem.hpp>
+#include <filesystem>
 
 namespace xrpl {
 
@@ -13,6 +13,6 @@ namespace xrpl {
  * @throws runtime_error
  */
 void
-extractTarLz4(boost::filesystem::path const& src, boost::filesystem::path const& dst);
+extractTarLz4(std::filesystem::path const& src, std::filesystem::path const& dst);
 
 }  // namespace xrpl

include/xrpl/basics/Buffer.h

@@ -3,6 +3,7 @@
 #include <xrpl/basics/Slice.h>
 #include <xrpl/beast/utility/instrumentation.h>
 
+#include <algorithm>
 #include <cstdint>
 #include <cstring>
 #include <memory>
@@ -156,6 +157,19 @@ public:
     }
     /** @} */
 
+    /**
+     * Set every byte in the buffer to the given value.
+     *
+     * The size is unchanged, and this is a no-op on an empty buffer.
+     *
+     * @param value the byte to write to every position.
+     */
+    void
+    fill(std::uint8_t value) noexcept
+    {
+        std::fill_n(p_.get(), size_, value);
+    }
+
     /**
      * Reset the buffer.
      * All memory is deallocated. The resulting size is 0.
@@ -226,10 +240,4 @@ operator==(Buffer const& lhs, Buffer const& rhs) noexcept
     return std::memcmp(lhs.data(), rhs.data(), lhs.size()) == 0;
 }
 
-inline bool
-operator!=(Buffer const& lhs, Buffer const& rhs) noexcept
-{
-    return !(lhs == rhs);
-}
-
 }  // namespace xrpl

include/xrpl/basics/FileUtilities.h

@@ -1,24 +1,79 @@
 #pragma once
 
-#include <boost/filesystem.hpp>
-#include <boost/system/error_code.hpp>
-
 #include <cstddef>
+#include <filesystem>
 #include <optional>
 #include <string>
+#include <system_error>
 
 namespace xrpl {
 
 std::string
 getFileContents(
-    boost::system::error_code& ec,
-    boost::filesystem::path const& sourcePath,
+    std::error_code& ec,
+    std::filesystem::path const& sourcePath,
     std::optional<std::size_t> maxSize = std::nullopt);
 
 void
 writeFileContents(
-    boost::system::error_code& ec,
-    boost::filesystem::path const& destPath,
+    std::error_code& ec,
+    std::filesystem::path const& destPath,
     std::string const& contents);
 
+/**
+ * Generate a unique, non-existing path under @p base whose filename starts with
+ * @p prefix and ends with a random hex suffix.
+ *
+ * Attempts up to @p maxAttempts paths. Throws `std::runtime_error` if a unique
+ * path cannot be found or if the filesystem returns an error while checking for
+ * existence.
+ */
+std::filesystem::path
+uniqueRandomPath(
+    std::filesystem::path const& base,
+    std::string const& prefix = "",
+    std::size_t maxAttempts = 100);
+
+/**
+ * RAII temporary directory.
+ *
+ * The directory and all its contents are deleted when
+ * the instance of `TempDir` is destroyed.
+ */
+class TempDir
+{
+    std::filesystem::path path_;
+
+public:
+#if !GENERATING_DOCS
+    TempDir(TempDir const&) = delete;
+    TempDir&
+    operator=(TempDir const&) = delete;
+#endif
+
+    /**
+     * Construct a temporary directory.
+     */
+    TempDir();
+
+    /**
+     * Destroy a temporary directory.
+     */
+    ~TempDir();
+
+    /**
+     * Get the native path for the temporary directory.
+     */
+    [[nodiscard]] std::string
+    path() const;
+
+    /**
+     * Get the native path for a file.
+     *
+     * The file does not need to exist.
+     */
+    [[nodiscard]] std::string
+    file(std::string const& name) const;
+};
+
 }  // namespace xrpl

include/xrpl/basics/IntrusivePointer.h

@@ -96,9 +96,6 @@ public:
     SharedIntrusive&
     operator=(SharedIntrusive const& rhs);
 
-    bool
-    operator!=(std::nullptr_t) const;
-
     bool
     operator==(std::nullptr_t) const;
 

include/xrpl/basics/IntrusivePointer.ipp

@@ -111,13 +111,6 @@ SharedIntrusive<T>::operator=(SharedIntrusive<TT>&& rhs)
     return *this;
 }
 
-template <class T>
-bool
-SharedIntrusive<T>::operator!=(std::nullptr_t) const
-{
-    return this->get() != nullptr;
-}
-
 template <class T>
 bool
 SharedIntrusive<T>::operator==(std::nullptr_t) const

include/xrpl/basics/Log.h

@@ -3,8 +3,8 @@
 #include <xrpl/beast/utility/Journal.h>
 
 #include <boost/beast/core/string.hpp>
-#include <boost/filesystem.hpp>
 
+#include <filesystem>
 #include <fstream>
 #include <map>
 #include <memory>
@@ -84,7 +84,7 @@ private:
          * @return `true` if the file was opened.
          */
         bool
-        open(boost::filesystem::path const& path);
+        open(std::filesystem::path const& path);
 
         /**
          * Close and re-open the system file associated with the log
@@ -133,7 +133,7 @@ private:
 
     private:
         std::unique_ptr<std::ofstream> stream_;
-        boost::filesystem::path path_;
+        std::filesystem::path path_;
     };
 
     std::mutex mutable mutex_;
@@ -152,7 +152,7 @@ public:
     virtual ~Logs() = default;
 
     bool
-    open(boost::filesystem::path const& pathToLogFile);
+    open(std::filesystem::path const& pathToLogFile);
 
     beast::Journal::Sink&
     get(std::string const& name);

include/xrpl/basics/Number.h

@@ -304,7 +304,7 @@ concept Integral64 = std::is_same_v<T, std::int64_t> || std::is_same_v<T, std::u
  *      on-ledger are non-negative. This is due to implementation details of
  *      several operations which use unsigned arithmetic internally. This is
  *      sufficient to represent all valid XRP values (where the absolute value
- *      can not exceed INITIAL_XRP: 10^17), and MPT values (where the absolute
+ *      can not exceed kInitialXRP: 10^17), and MPT values (where the absolute
  *      value can not exceed maxMPTokenAmount: 2^63-1).
  *
  * ---- Mantissa Range Switching ----
@@ -449,12 +449,6 @@ public:
             x.exponent_ == y.exponent_;
     }
 
-    friend constexpr bool
-    operator!=(Number const& x, Number const& y) noexcept
-    {
-        return !(x == y);
-    }
-
     friend constexpr bool
     operator<(Number const& l, Number const& r) noexcept
     {

include/xrpl/basics/SHAMapHash.h

@@ -85,12 +85,6 @@ public:
     }
 };
 
-inline bool
-operator!=(SHAMapHash const& x, SHAMapHash const& y)
-{
-    return !(x == y);
-}
-
 template <>
 inline std::size_t
 extract(SHAMapHash const& key)

include/xrpl/basics/Slice.h

@@ -208,12 +208,6 @@ operator==(Slice const& lhs, Slice const& rhs) noexcept
     return std::memcmp(lhs.data(), rhs.data(), lhs.size()) == 0;
 }
 
-inline bool
-operator!=(Slice const& lhs, Slice const& rhs) noexcept
-{
-    return !(lhs == rhs);
-}
-
 inline bool
 operator<(Slice const& lhs, Slice const& rhs) noexcept
 {

include/xrpl/basics/StringUtilities.h

@@ -2,7 +2,6 @@
 
 #include <xrpl/basics/Blob.h>
 
-#include <boost/format.hpp>
 #include <boost/utility/string_view.hpp>
 
 #include <array>
@@ -125,9 +124,31 @@ struct ParsedUrl
 bool
 parseUrl(ParsedUrl& pUrl, std::string const& strUrl);
 
+/**
+ * Remove leading and trailing ASCII whitespace.
+ *
+ * Whitespace is the fixed set " \t\n\v\f\r"; the current locale is not
+ * consulted, so the result depends only on the input.
+ *
+ * @param str The string to trim.
+ * @return @p str without leading or trailing whitespace.
+ */
 std::string
 trimWhitespace(std::string str);
 
+/**
+ * Fold ASCII upper case letters to lower case.
+ *
+ * Only 'A' through 'Z' are remapped; every other byte is left alone and the
+ * current locale is not consulted, so the result depends only on the input.
+ *
+ * @param str The string to fold.
+ * @return @p str with each ASCII upper case letter replaced by its lower case
+ *         equivalent.
+ */
+std::string
+toLower(std::string str);
+
 std::optional<std::uint64_t>
 toUInt64(std::string const& s);
 

include/xrpl/basics/partitioned_unordered_map.h

@@ -116,12 +116,6 @@ public:
         {
             return lhs.map == rhs.map && lhs.ait == rhs.ait && lhs.mit == rhs.mit;
         }
-
-        friend bool
-        operator!=(Iterator const& lhs, Iterator const& rhs)
-        {
-            return !(lhs == rhs);
-        }
     };
 
     struct ConstIterator
@@ -189,12 +183,6 @@ public:
         {
             return lhs.map == rhs.map && lhs.ait == rhs.ait && lhs.mit == rhs.mit;
         }
-
-        friend bool
-        operator!=(ConstIterator const& lhs, ConstIterator const& rhs)
-        {
-            return !(lhs == rhs);
-        }
     };
 
 private:

include/xrpl/beast/container/detail/aged_ordered_container.h

@@ -1038,25 +1038,6 @@ public:
                Compare,
                OtherAllocator> const& other) const;
 
-    template <
-        bool OtherIsMulti,
-        bool OtherIsMap,
-        class OtherT,
-        class OtherDuration,
-        class OtherAllocator>
-    bool
-    operator!=(AgedOrderedContainer<
-               OtherIsMulti,
-               OtherIsMap,
-               Key,
-               OtherT,
-               OtherDuration,
-               Compare,
-               OtherAllocator> const& other) const
-    {
-        return !(this->operator==(other));
-    }
-
     template <
         bool OtherIsMulti,
         bool OtherIsMap,

include/xrpl/beast/container/detail/aged_unordered_container.h

@@ -1340,28 +1340,6 @@ public:
                OtherAllocator> const& other) const
         requires MaybeMulti;
 
-    template <
-        bool OtherIsMulti,
-        bool OtherIsMap,
-        class OtherKey,
-        class OtherT,
-        class OtherDuration,
-        class OtherHash,
-        class OtherAllocator>
-    bool
-    operator!=(AgedUnorderedContainer<
-               OtherIsMulti,
-               OtherIsMap,
-               OtherKey,
-               OtherT,
-               OtherDuration,
-               OtherHash,
-               KeyEqual,
-               OtherAllocator> const& other) const
-    {
-        return !(this->operator==(other));
-    }
-
 private:
     bool
     wouldExceed(size_type additional) const

include/xrpl/beast/core/List.h

@@ -82,13 +82,6 @@ public:
         return node_ == other.node_;
     }
 
-    template <typename M>
-    bool
-    operator!=(ListIterator<M> const& other) const noexcept
-    {
-        return !((*this) == other);
-    }
-
     reference
     operator*() const noexcept
     {

include/xrpl/beast/net/IPAddress.h

@@ -103,7 +103,7 @@ namespace boost {
 template <>
 struct hash<::beast::ip::Address>
 {
-    explicit hash() = default;
+    hash() = default;
 
     std::size_t
     operator()(::beast::ip::Address const& addr) const

include/xrpl/beast/net/IPEndpoint.h

@@ -110,12 +110,6 @@ public:
     operator==(Endpoint const& lhs, Endpoint const& rhs);
     friend bool
     operator<(Endpoint const& lhs, Endpoint const& rhs);
-
-    friend bool
-    operator!=(Endpoint const& lhs, Endpoint const& rhs)
-    {
-        return !(lhs == rhs);
-    }
     friend bool
     operator>(Endpoint const& lhs, Endpoint const& rhs)
     {

include/xrpl/beast/rfc2616.h

@@ -11,6 +11,7 @@
 #include <cstddef>
 #include <iterator>
 #include <string>
+#include <string_view>
 #include <vector>
 
 namespace beast::rfc2616 {
@@ -186,7 +187,7 @@ splitCommas(FwdIt first, FwdIt last)
 
 template <class Result = std::vector<std::string>>
 Result
-splitCommas(boost::beast::string_view const& s)
+splitCommas(std::string_view s)
 {
     return splitCommas(s.begin(), s.end());
 }
@@ -229,12 +230,6 @@ public:
         return other.it_ == it_ && other.end_ == end_ && other.value_.size() == value_.size();
     }
 
-    bool
-    operator!=(ListIterator const& other) const
-    {
-        return !(*this == other);
-    }
-
     reference
     operator*() const
     {

include/xrpl/beast/unit_test/reporter.h

@@ -8,7 +8,6 @@
 #include <xrpl/beast/unit_test/runner.h>
 #include <xrpl/beast/unit_test/suite_info.h>
 
-#include <boost/lexical_cast.hpp>
 #include <boost/optional.hpp>
 
 #include <algorithm>
@@ -188,7 +187,7 @@ Reporter<Unused>::fmtdur(clock_type::duration const& d)
     using namespace std::chrono;
     auto const ms = duration_cast<milliseconds>(d);
     if (ms < seconds{1})
-        return boost::lexical_cast<std::string>(ms.count()) + "ms";
+        return std::to_string(ms.count()) + "ms";
     std::stringstream ss;
     ss << std::fixed << std::setprecision(1) << (ms.count() / 1000.) << "s";
     return ss.str();

include/xrpl/beast/unit_test/suite.h

@@ -6,11 +6,10 @@
 
 #include <xrpl/beast/unit_test/runner.h>
 
-#include <boost/filesystem.hpp>
-#include <boost/lexical_cast.hpp>
 #include <boost/throw_exception.hpp>
 
 #include <exception>
+#include <filesystem>
 #include <memory>
 #include <ostream>
 #include <sstream>
@@ -27,10 +26,10 @@ makeReason(String const& reason, char const* file, int line)
     std::string s(reason);
     if (!s.empty())
         s.append(": ");
-    namespace fs = boost::filesystem;
+    namespace fs = std::filesystem;
     s.append(fs::path{file}.filename().string());
     s.append("(");
-    s.append(boost::lexical_cast<std::string>(line));
+    s.append(std::to_string(line));
     s.append(")");
     return s;
 }

include/xrpl/beast/utility/temp_dir.h

@@ -1,71 +0,0 @@
-#pragma once
-
-#include <boost/filesystem.hpp>
-
-#include <string>
-
-namespace beast {
-
-/**
- * RAII temporary directory.
- *
- * The directory and all its contents are deleted when
- * the instance of `temp_dir` is destroyed.
- */
-class TempDir
-{
-    boost::filesystem::path path_;
-
-public:
-#if !GENERATING_DOCS
-    TempDir(TempDir const&) = delete;
-    TempDir&
-    operator=(TempDir const&) = delete;
-#endif
-
-    /**
-     * Construct a temporary directory.
-     */
-    TempDir()
-    {
-        auto const dir = boost::filesystem::temp_directory_path();
-        do
-        {
-            path_ = dir / boost::filesystem::unique_path();
-        } while (boost::filesystem::exists(path_));
-        boost::filesystem::create_directory(path_);
-    }
-
-    /**
-     * Destroy a temporary directory.
-     */
-    ~TempDir()
-    {
-        // use non-throwing calls in the destructor
-        boost::system::error_code ec;
-        boost::filesystem::remove_all(path_, ec);
-        // TODO: warn/notify if ec set ?
-    }
-
-    /**
-     * Get the native path for the temporary directory
-     */
-    [[nodiscard]] std::string
-    path() const
-    {
-        return path_.string();
-    }
-
-    /**
-     * Get the native path for the a file.
-     *
-     * The file does not need to exist.
-     */
-    [[nodiscard]] std::string
-    file(std::string const& name) const
-    {
-        return (path_ / name).string();
-    }
-};
-
-}  // namespace beast

include/xrpl/conditions/Condition.h

@@ -92,10 +92,4 @@ operator==(Condition const& lhs, Condition const& rhs)
         lhs.fingerprint == rhs.fingerprint;
 }
 
-inline bool
-operator!=(Condition const& lhs, Condition const& rhs)
-{
-    return !(lhs == rhs);
-}
-
 }  // namespace xrpl::cryptoconditions

include/xrpl/conditions/Fulfillment.h

@@ -93,12 +93,6 @@ operator==(Fulfillment const& lhs, Fulfillment const& rhs)
         lhs.fingerprint() == rhs.fingerprint();
 }
 
-inline bool
-operator!=(Fulfillment const& lhs, Fulfillment const& rhs)
-{
-    return !(lhs == rhs);
-}
-
 /**
  * Determine whether the given fulfillment and condition match
  */

include/xrpl/config/BasicConfig.h

@@ -2,7 +2,6 @@
 
 #include <xrpl/basics/contract.h>
 
-#include <boost/beast/core/string.hpp>
 #include <boost/lexical_cast.hpp>
 
 #include <algorithm>

include/xrpl/config/Constants.h

@@ -125,6 +125,7 @@ struct Keys
     static constexpr auto kMaximumTxnInLedger = "maximum_txn_in_ledger";
     static constexpr auto kMaximumTxnPerAccount = "maximum_txn_per_account";
     static constexpr auto kMemoryLevel = "memory_level";
+    static constexpr auto kMaxWaitingLedgers = "max_waiting_ledgers";
     static constexpr auto kMinLedgersToComputeSizeLimit = "min_ledgers_to_compute_size_limit";
     static constexpr auto kMinimumEscalationMultiplier = "minimum_escalation_multiplier";
     static constexpr auto kMinimumLastLedgerBuffer = "minimum_last_ledger_buffer";

include/xrpl/core/PerfLog.h

@@ -4,10 +4,9 @@
 #include <xrpl/core/Job.h>
 #include <xrpl/json/json_value.h>
 
-#include <boost/filesystem.hpp>
-
 #include <chrono>
 #include <cstdint>
+#include <filesystem>
 #include <functional>
 #include <memory>
 #include <string>
@@ -44,7 +43,7 @@ public:
      */
     struct Setup
     {
-        boost::filesystem::path perfLog;
+        std::filesystem::path perfLog;
         // log_interval is in milliseconds to support faster testing.
         milliseconds logInterval{seconds(1)};
     };
@@ -149,7 +148,7 @@ public:
 };
 
 PerfLog::Setup
-setupPerfLog(Section const& section, boost::filesystem::path const& configDir);
+setupPerfLog(Section const& section, std::filesystem::path const& configDir);
 
 std::unique_ptr<PerfLog>
 makePerfLog(

include/xrpl/json/Output.h

@@ -1,20 +1,19 @@
 #pragma once
 
-#include <boost/beast/core/string.hpp>
-
 #include <functional>
 #include <string>
+#include <string_view>
 
 namespace json {
 
 class Value;
 
-using Output = std::function<void(boost::beast::string_view const&)>;
+using Output = std::function<void(std::string_view)>;
 
 inline Output
 stringOutput(std::string& s)
 {
-    return [&](boost::beast::string_view const& b) { s.append(b.data(), b.size()); };
+    return [&](std::string_view b) { s.append(b.data(), b.size()); };
 }
 
 /**

include/xrpl/json/json_value.h

@@ -4,6 +4,7 @@
 #include <xrpl/json/json_forwards.h>
 
 #include <cstring>
+#include <iterator>
 #include <limits>
 #include <map>
 #include <string>
@@ -72,36 +73,18 @@ operator==(StaticString x, StaticString y)
     return strcmp(x.cStr(), y.cStr()) == 0;
 }
 
-inline bool
-operator!=(StaticString x, StaticString y)
-{
-    return !(x == y);
-}
-
 inline bool
 operator==(std::string const& x, StaticString y)
 {
     return strcmp(x.c_str(), y.cStr()) == 0;
 }
 
-inline bool
-operator!=(std::string const& x, StaticString y)
-{
-    return !(x == y);
-}
-
 inline bool
 operator==(StaticString x, std::string const& y)
 {
     return y == x;
 }
 
-inline bool
-operator!=(StaticString x, std::string const& y)
-{
-    return !(y == x);
-}
-
 /**
  * @brief Represents a <a HREF="http://www.json.org">JSON</a> value.
  *
@@ -489,12 +472,6 @@ toJson(xrpl::Number const& number)
 bool
 operator==(Value const&, Value const&);
 
-inline bool
-operator!=(Value const& x, Value const& y)
-{
-    return !(x == y);
-}
-
 bool
 operator<(Value const&, Value const&);
 
@@ -548,6 +525,7 @@ public:
 class ValueIteratorBase
 {
 public:
+    using iterator_category = std::bidirectional_iterator_tag;
     using size_t = unsigned int;
     using difference_type = int;
     using SelfType = ValueIteratorBase;
@@ -562,12 +540,6 @@ public:
         return isEqual(other);
     }
 
-    bool
-    operator!=(SelfType const& other) const
-    {
-        return !isEqual(other);
-    }
-
     /**
      * Return either the index or the member name of the referenced value as a
      * Value.

include/xrpl/ledger/BookDirs.h

@@ -49,12 +49,6 @@ public:
     bool
     operator==(const_iterator const& other) const;
 
-    bool
-    operator!=(const_iterator const& other) const
-    {
-        return !(*this == other);
-    }
-
     reference
     operator*() const;
 

include/xrpl/ledger/CanonicalTXSet.h

@@ -59,12 +59,6 @@ private:
             return lhs.txId_ == rhs.txId_;
         }
 
-        friend bool
-        operator!=(Key const& lhs, Key const& rhs)
-        {
-            return !(lhs == rhs);
-        }
-
         [[nodiscard]] uint256 const&
         getAccount() const
         {

include/xrpl/ledger/Dir.h

@@ -59,12 +59,6 @@ public:
     bool
     operator==(ConstIterator const& other) const;
 
-    bool
-    operator!=(ConstIterator const& other) const
-    {
-        return !(*this == other);
-    }
-
     reference
     operator*() const;
 

include/xrpl/ledger/Ledger.h

@@ -7,6 +7,7 @@
 #include <xrpl/beast/utility/Journal.h>
 #include <xrpl/ledger/CachedView.h>
 #include <xrpl/ledger/RawView.h>
+#include <xrpl/protocol/BatchInnerResult.h>
 #include <xrpl/protocol/Fees.h>
 #include <xrpl/protocol/Keylet.h>
 #include <xrpl/protocol/LedgerHeader.h>
@@ -325,6 +326,24 @@ public:
     bool
     addSLE(SLE const& sle);
 
+    /**
+     * @brief Inner Batch outcomes observed while this node built the ledger.
+     *
+     * Empty for a ledger acquired from the network or loaded from the database. Not part of
+     * the ledger hash; persisted to the transaction tables when the ledger is saved.
+     */
+    void
+    setBatchInnerResults(std::vector<BatchInnerResult> results)
+    {
+        batchInnerResults_ = std::move(results);
+    }
+
+    std::vector<BatchInnerResult> const&
+    batchInnerResults() const
+    {
+        return batchInnerResults_;
+    }
+
     //--------------------------------------------------------------------------
 
     void
@@ -433,6 +452,7 @@ private:
     Rules rules_;
     LedgerHeader header_;
     beast::Journal j_;
+    std::vector<BatchInnerResult> batchInnerResults_;
 };
 
 /**

include/xrpl/ledger/View.h

@@ -24,6 +24,7 @@
 #include <optional>
 #include <set>
 #include <utility>
+#include <vector>
 
 namespace xrpl {
 
@@ -35,6 +36,11 @@ enum class SkipEntry : bool { No = false, Yes };
 //
 //------------------------------------------------------------------------------
 
+/**
+ * Whether an expiration check should be inclusive or exclusive.
+ */
+enum class ExpiryComparison { Inclusive, Exclusive };
+
 /**
  * Determines whether the given expiration time has passed.
  *
@@ -54,11 +60,16 @@ enum class SkipEntry : bool { No = false, Yes };
  *
  * @param view The ledger whose parent time is used as the clock.
  * @param exp The optional expiration time we want to check.
+ * @param comparison Whether the boundary is inclusive (`now >= exp`, the
+ *                   default) or exclusive (`now > exp`).
  *
  * @return `true` if `exp` is in the past; `false` otherwise.
  */
 [[nodiscard]] bool
-hasExpired(ReadView const& view, std::optional<std::uint32_t> const& exp);
+hasExpired(
+    ReadView const& view,
+    std::optional<std::uint32_t> const& exp,
+    ExpiryComparison comparison = ExpiryComparison::Inclusive);
 
 // Note, depth parameter is used to limit the recursion depth
 [[nodiscard]] bool
@@ -68,6 +79,13 @@ isVaultPseudoAccountFrozen(
     MPTIssue const& mptShare,
     std::uint8_t depth);
 
+[[nodiscard]] bool
+isVaultPseudoAccountFrozen(
+    ReadView const& view,
+    AccountID const& account,
+    SLE const& issuanceSle,
+    std::uint8_t depth);
+
 [[nodiscard]] bool
 isLPTokenFrozen(
     ReadView const& view,
@@ -75,6 +93,26 @@ isLPTokenFrozen(
     Asset const& asset,
     Asset const& asset2);
 
+/**
+ * Check whether an AMM LPToken may be transferred between @p from and @p to.
+ *
+ * @p lpTokenIssuer is the issuer of the LPToken being moved. If it is not an
+ * AMM account the token is not an LPToken and the transfer is unconditionally
+ * permitted. Otherwise, for each MPT pool asset of that AMM, canTransfer() must
+ * permit the transfer (which exempts the MPT issuer). Non-MPT pool assets are
+ * always transferable by this check, so it is implicitly gated by
+ * featureMPTokensV2 (MPTs can only be AMM pool assets once V2 is enabled).
+ *
+ * @return tesSUCCESS if permitted, otherwise the canTransfer() failure code
+ * (e.g. tecNO_AUTH) of the first MPT pool asset that disallows it.
+ */
+[[nodiscard]] TER
+canTransferLPToken(
+    ReadView const& view,
+    AccountID const& from,
+    AccountID const& to,
+    AccountID const& lpTokenIssuer);
+
 // Return the list of enabled amendments
 [[nodiscard]] std::set<uint256>
 getEnabledAmendments(ReadView const& view);
@@ -161,7 +199,10 @@ dirLink(
  *      if withdrawing to self.
  *    - If withdrawing to self, succeed.
  *    - If not, checks if the receiver requires deposit authorization, and if
- *      the sender has it.
+ *      the sender has it (account-based or credential-based).
+ *    - Expects any credentials passed in to already exist in the ledger, and
+ *      returns an internal error otherwise. Validate them beforehand with
+ *      credentials::valid().
  *    - Checks that the receiver will not exceed the limit (IOU trustline limit
  *      or MPT MaximumAmount).
  */
@@ -172,7 +213,8 @@ canWithdraw(
     AccountID const& to,
     SLE::const_ref toSle,
     STAmount const& amount,
-    bool hasDestinationTag);
+    bool hasDestinationTag,
+    std::optional<std::vector<uint256>> const& credentialIDs = std::nullopt);
 
 /**
  * Checks that can withdraw funds from an object to itself or a destination.
@@ -185,7 +227,10 @@ canWithdraw(
  *      if withdrawing to self.
  *    - If withdrawing to self, succeed.
  *    - If not, checks if the receiver requires deposit authorization, and if
- *      the sender has it.
+ *      the sender has it (account-based or credential-based).
+ *    - Expects any credentials passed in to already exist in the ledger, and
+ *      returns an internal error otherwise. Validate them beforehand with
+ *      credentials::valid().
  *    - Checks that the receiver will not exceed the limit (IOU trustline limit
  *      or MPT MaximumAmount).
  */
@@ -195,20 +240,25 @@ canWithdraw(
     AccountID const& from,
     AccountID const& to,
     STAmount const& amount,
-    bool hasDestinationTag);
+    bool hasDestinationTag,
+    std::optional<std::vector<uint256>> const& credentialIDs = std::nullopt);
 
 /**
  * Checks that can withdraw funds from an object to itself or a destination.
  *
  * The receiver may be either the submitting account (sfAccount) or a different
- * destination account (sfDestination).
+ * destination account (sfDestination). Credentials, if any, are taken from the
+ * transaction's sfCredentialIDs field.
  *
  *    - Checks that the receiver account exists.
  *    - If the receiver requires a destination tag, check that one exists, even
  *      if withdrawing to self.
  *    - If withdrawing to self, succeed.
  *    - If not, checks if the receiver requires deposit authorization, and if
- *      the sender has it.
+ *      the sender has it (account-based or credential-based).
+ *    - Expects any credentials in sfCredentialIDs to already exist in the
+ *      ledger, and returns an internal error otherwise. Validate them
+ *      beforehand with credentials::valid().
  *    - Checks that the receiver will not exceed the limit (IOU trustline limit
  *      or MPT MaximumAmount).
  */

include/xrpl/ledger/detail/ReadViewFwdRange.h

@@ -85,9 +85,6 @@ public:
         bool
         operator==(Iterator const& other) const;
 
-        bool
-        operator!=(Iterator const& other) const;
-
         // Can throw
         reference
         operator*() const;