refactor: Exempt sfAssetsTotal from the associateAsset sweep post-Lend11

Replace the per-transactor `if (!useDust)` gate around
`associateAsset(*vaultSle, asset)` and the pre-truncation
`- split.receiver->dustDelta` compensation in the dust-aware
Vault writes with a metadata-driven exemption on sfAssetsTotal
itself. Under featureLendingProtocolV1_1, sfAssetsTotal now
retains full Number (19-digit) precision instead of being
truncated to STAmount (16-digit) precision at end of transactor,
so it can absorb the same sub-quantum residual that sfDust
absorbs on the custody line. The receivable invariant becomes
`sfAssetsTotal − (sfAssetsAvailable + custodyLine.sfDust) =
Σ PrincipalOutstanding`, which reduces to the classic form
pre-amendment (dust always zero) and holds byte-for-byte across
arbitrarily long dust-bearing sequences post-amendment.

Design (no signature changes, no plumbing at any of the ~19
associateAsset call sites):

- Introduce `SField::kSmdAssetPreLend11 = 0x100`, semantically
  "swept only when featureLendingProtocolV1_1 is not enabled."
- Retag sfAssetsTotal from `kSmdNeedsAsset | kSmdDefault` to
  `kSmdAssetPreLend11 | kSmdDefault`. sfAssetsAvailable,
  sfAssetsMaximum, sfLossUnrealized keep kSmdNeedsAsset.
- `associateAsset(SLE&, Asset const&)` gate becomes the union
  `kSmdNeedsAsset || (kSmdAssetPreLend11 &&
  !isFeatureEnabled(featureLendingProtocolV1_1))`, read from the
  thread-local CurrentTransactionRulesGuard. No rules installed
  → returns false → sweep runs (safe legacy behavior).
- Widen the Debug-only sanity assertion in
  `STNumber::associateAsset` to accept either bit. The
  serialisation-path check at STNumber::add remains keyed on
  kSmdNeedsAsset only — that is what keeps sfAssetsTotal at full
  precision on the wire post-amendment.

Consequences:

- addVaultAssets: `sfAssetsTotal += Number{valueDelta}` (no
  `- dustDelta` compensation).
- reconcileSenderDust: only sfAssetsAvailable moves on a
  sender-leg dust reshuffle; sfAssetsTotal is unchanged because
  the underlying quantity on the custody line is unchanged.
- LoanPay: unconditional `associateAsset(*vaultSle, asset)`; the
  20-line docblock explaining the local skip is gone.
- VaultInvariant: sfAssetsTotal delta comparisons in the
  deposit / withdraw / clawback branches now use the extended
  delta `delta + dustDelta`. Pre-amendment dustDelta is always
  zero, so the check reduces to the classic form there.

Tests:

- New src/tests/libxrpl/protocol/STTakesAsset.cpp — 6 targeted
  gtest cases covering the sweep for (kSmdNeedsAsset-only,
  kSmdAssetPreLend11-only, both, neither) × (rules on, rules
  off, no rules installed).
- Existing Vault/Loan suites re-baselined to the dust-inclusive
  invariant via `readVaultDust()`; the shared VaultRounding_test
  fixtures now degrade cleanly to the classic RED contract on
  the base branch where readVaultDust() returns zero.

.clang-tidy

@@ -90,13 +90,6 @@ CheckOptions:
   readability-identifier-naming.ClassCase: CamelCase
   readability-identifier-naming.StructCase: CamelCase
   readability-identifier-naming.UnionCase: CamelCase
-  readability-identifier-naming.TypeAliasCase: CamelCase
-  readability-identifier-naming.TypedefCase: CamelCase
-  # Member type names mandated by std/Boost concepts. Subtrees that need more
-  # than these carry their own .clang-tidy (include/xrpl/{beast,basics,protocol,
-  # peerfinder}, src/test/beast); one-off cases use an inline NOLINT.
-  readability-identifier-naming.TypeAliasIgnoredRegexp: "^(const_iterator|const_reference|difference_type|duration|iterator|iterator_category|key_type|mapped_type|period|pointer|reference|rep|result_type|size_type|time_point|value_type)$"
-  readability-identifier-naming.TypedefIgnoredRegexp: "^(const_iterator|const_reference|difference_type|duration|iterator|iterator_category|key_type|mapped_type|period|pointer|reference|rep|result_type|size_type|time_point|value_type)$"
   readability-identifier-naming.EnumCase: CamelCase
   readability-identifier-naming.EnumConstantCase: CamelCase
   readability-identifier-naming.ScopedEnumConstantCase: CamelCase
@@ -129,5 +122,5 @@ CheckOptions:
   readability-identifier-naming.GlobalFunctionIgnoredRegexp: "^(to_string|hash_append|tuple_hash)$"
 
 HeaderFilterRegex: '^.*/(tests?|xrpl|xrpld)/.*\.(h|hpp|ipp)$'
-ExcludeHeaderFilterRegex: '^.*/protocol_autogen/.*\.(h|hpp)$|^.*\.pb\.h$'
+ExcludeHeaderFilterRegex: '^.*/protocol_autogen/.*\.(h|hpp)$'
 WarningsAsErrors: "*"

.codecov.yml

@@ -1,32 +1,10 @@
 codecov:
   require_ci_to_pass: true
-  # The C++ and Rust uploads land minutes apart; without this gate Codecov
-  # publishes a near-zero total from whichever one arrives first.
-  notify:
-    after_n_builds: 2
-    wait_for_ci: true
 
 comment:
   behavior: default
   layout: reach,diff,flags,tree,reach
-  show_carryforward_flags: true
-  after_n_builds: 2
-
-# C++ and Rust coverage upload from independent workflows under the `cpp` and
-# `rust` flags; carryforward keeps one language's total when only the other reran.
-flag_management:
-  default_rules:
-    carryforward: true
-  individual_flags:
-    - name: cpp
-      carryforward: true
-      paths:
-        - include/
-        - src/
-    - name: rust
-      carryforward: true
-      paths:
-        - crates/
+  show_carryforward_flags: false
 
 coverage:
   range: "70..85"

.cspell.config.yaml

@@ -7,7 +7,6 @@ ignorePaths:
   - cmake/**
   - LICENSE.md
   - .clang-tidy
-  - nix/check-tools/*.txt # generated, and full of Nix store hashes
 language: en
 allowCompoundWords: true # TODO (#6334)
 ignoreRandomStrings: true
@@ -64,13 +63,11 @@ words:
   - blindings
   - bookdir
   - Bougalis
-  - bthomee
   - Britto
   - Btrfs
   - Buildx
   - canonicality
   - canonicalised
-  - cctools
   - changespq
   - checkme
   - choco
@@ -112,7 +109,6 @@ words:
   - disablerepo
   - distro
   - doxyfile
-  - dsymutil
   - dxrpl
   - elgamal
   - enabled
@@ -142,7 +138,6 @@ words:
   - hwrap
   - ifndef
   - inequation
-  - Injectivity
   - insuf
   - insuff
   - invasively
@@ -172,7 +167,6 @@ words:
   - LOCALGOOD
   - logwstream
   - Lombrozo
-  - lresolv
   - lseq
   - lsmf
   - ltype
@@ -226,7 +220,6 @@ words:
   - Nyffenegger
   - onlatest
   - ostr
-  - otool
   - oxalica
   - pargs
   - partitioner
@@ -253,19 +246,27 @@ words:
   - qalloc
   - qbsprofile
   - queuable
+  - parameterise
+  - parameterises
+  - parameterised
   - Raphson
   - rcflags
-  - reencrypted
+  - recognise
+  - recognises
+  - recognised
+  - renormalise
+  - renormalises
+  - renormalised
+  - renormalisation
+  - reserialise
+  - reserialises
+  - reserialised
   - replayer
-  - repodata
-  - repomd
   - rerandomize
   - rerandomization
   - rerandomized
   - rerandomizes
   - rerere
-  - retargeted
-  - retargets
   - retriable
   - RIPD
   - ripdtop
@@ -301,7 +302,6 @@ words:
   - sles
   - soci
   - socidb
-  - Sonatype
   - sponsee
   - sponsees
   - SRPMS
@@ -321,7 +321,6 @@ words:
   - summands
   - superpeer
   - superpeers
-  - Swatinem
   - takergets
   - takerpays
   - ters
@@ -377,7 +376,6 @@ words:
   - wthread
   - xbridge
   - xchain
-  - xcrun
   - ximinez
   - XMACRO
   - xored
@@ -387,6 +385,4 @@ words:
   - xrplf
   - xxhash
   - xxhasher
-  - zstdio
   - CGNAT
-  - ungated

.envrc

@@ -1,14 +1,7 @@
 watch_file nix/*.nix
 
-# Pinned Rust toolchain, read by nix/packages.nix via fromRustupToolchainFile.
-watch_file rust-toolchain.toml
-
 # The dev shell derivation includes all of conan/ (see nix/devshell.nix), so any
 # change in there has to invalidate direnv's cached environment.
 watch_dir conan
 
 use flake
-
-# Optional, untracked local overrides. To use a different shell, put e.g.
-# `use flake .#formal-verification` in .envrc.local.
-source_env_if_exists .envrc.local

.git-blame-ignore-revs

@@ -5,18 +5,6 @@
 # This file is sorted in reverse chronological order, with the most recent commits at the top.
 # The commits listed here are ignored by git blame, which is useful for formatting-only commits that would otherwise obscure the history of changes to a file.
 
-# chore: CamelCase for typedef/using in `clang-tidy` (#8177)
-97a1824537d20d82d25bf151a37a7a4532ebf085
-# chore: Rename CamelCase namespaces to snake_case (#7933)
-06488c1318d96f56d0536251bee08ac85fa7fdd3
-# style: Unify style for all Doxygen comments (#7776)
-73b6852a122854140336e6e6bc30a3a4b41aa5fd
-# style: More clang-tidy identifier renaming (#7290)
-a830ab10efed8d3e59ef2fc15d66efdf9c6bb0d8
-# refactor: Rename static constants (#7120)
-5b6e8b6f93b19c1e3f6a3467a25639031d9d9a53
-# chore: More fixes for bad renames (#7092)
-7afdd71a54d562b32a50b29a5aa00bb997dc9053
 # refactor: Enable clang-tidy `readability-identifier-naming` check (#6571)
 8995564ed6b9e453e144bb663303072a3c1ba305
 # refactor: Enable remaining clang-tidy `cppcoreguidelines` checks (#6538)

.github/actions/cargo-cache/action.yml

@@ -1,39 +0,0 @@
-name: Use cargo artifacts cache
-description: >
-  Cache the cargo build artifacts with rust-cache. Never caches ~/.cargo/bin:
-  when saving the cache, rust-cache deletes all binaries that were already
-  present there, which on persistent self-hosted runners wipes the tools
-  installed by prepare-runner. Harmless on ephemeral runners, but kept
-  consistent everywhere.
-
-inputs:
-  workspaces:
-    description: "Workspaces to cache, as 'workspace -> target' lines."
-    required: false
-    default: crates
-  key:
-    description: "Additional part of the cache key."
-    required: false
-    default: ""
-  cache-directories:
-    description: "Additional non-workspace directories to cache."
-    required: false
-    default: ""
-  save-if:
-    description: >
-      Condition for saving the cache after the job. Defaults to save only from develop branch
-    required: false
-    default: ${{ github.ref == 'refs/heads/develop' }}
-
-runs:
-  using: composite
-
-  steps:
-    - name: Use cargo artifacts cache
-      uses: Swatinem/rust-cache@6323deb102c322ba6fcbdcafc7e3dddab59af2b6 # v2.9.2
-      with:
-        cache-bin: "false"
-        cache-directories: ${{ inputs.cache-directories }}
-        key: ${{ inputs.key }}
-        save-if: ${{ inputs.save-if }}
-        workspaces: ${{ inputs.workspaces }}

.github/actions/generate-version/action.yml

@@ -0,0 +1,44 @@
+name: Generate build version number
+description: "Generate build version number."
+
+outputs:
+  version:
+    description: "The generated build version number."
+    value: ${{ steps.version.outputs.version }}
+
+runs:
+  using: composite
+  steps:
+    # When a tag is pushed, the version is used as-is.
+    - name: Generate version for tag event
+      if: ${{ startsWith(github.ref, 'refs/tags/') }}
+      shell: bash
+      env:
+        VERSION: ${{ github.ref_name }}
+      run: echo "VERSION=${VERSION}" >>"${GITHUB_ENV}"
+
+    # When a tag is not pushed, then the version (e.g. 1.2.3-b0) is extracted
+    # from the BuildInfo.cpp file and the shortened commit hash appended to it.
+    # We use a plus sign instead of a hyphen because Conan recipe versions do
+    # not support two hyphens.
+    - name: Generate version for non-tag event
+      if: ${{ !startsWith(github.ref, 'refs/tags/') }}
+      shell: bash
+      run: |
+        echo 'Extracting version from BuildInfo.cpp.'
+        VERSION="$(cat src/libxrpl/protocol/BuildInfo.cpp | grep "versionString =" | awk -F '"' '{print $2}')"
+        if [[ -z "${VERSION}" ]]; then
+            echo 'Unable to extract version from BuildInfo.cpp.'
+            exit 1
+        fi
+
+        echo 'Appending shortened commit hash to version.'
+        SHA='${{ github.sha }}'
+        VERSION="${VERSION}+${SHA:0:7}"
+
+        echo "VERSION=${VERSION}" >>"${GITHUB_ENV}"
+
+    - name: Output version
+      id: version
+      shell: bash
+      run: echo "version=${VERSION}" >>"${GITHUB_OUTPUT}"

.github/actions/release-info/action.yml

@@ -1,39 +0,0 @@
-name: Release info
-description: "Derive the version, release channel and package release number for this build."
-
-outputs:
-  version:
-    description: "The build version number."
-    value: ${{ steps.version.outputs.version }}
-  channel:
-    description: "The release channel this build belongs to."
-    value: ${{ steps.release_info.outputs.channel }}
-  pkg_release:
-    description: "The package release number: 1 for a tag, <run number>.<commit date>git<short commit hash> otherwise."
-    value: ${{ steps.release_info.outputs.pkg_release }}
-
-runs:
-  using: composite
-  steps:
-    # A tag names its own version. Anything else is a development build named by
-    # its commit hash, matching what cmake/XrplVersion.cmake derives: the head of
-    # a pull request rather than the merge commit GitHub creates for it.
-    - name: Determine version
-      id: version
-      shell: bash
-      env:
-        IS_TAG: ${{ startsWith(github.ref, 'refs/tags/') }}
-        REF_NAME: ${{ github.ref_name }}
-        SHA: ${{ github.event.pull_request.head.sha || github.sha }}
-      run: |
-        if [[ "${IS_TAG}" == "true" ]]; then
-            version="${REF_NAME}"
-        else
-            version="0.0.0-dev+${SHA:0:7}"
-        fi
-
-        echo "version=${version}" | tee -a "${GITHUB_OUTPUT}"
-
-    - name: Determine release channel and package release
-      id: release_info
-      uses: XRPLF/actions/release-info@a9f2eeca6fb3980ba3a84cf68566f1c69ad30674

.github/actions/setup-nix-env/action.yml

@@ -1,70 +0,0 @@
-name: Setup Nix environment
-description: "Build the flake's CI environment and put its tools on PATH."
-
-# The environment from nix/ci-env.nix, the same one the Linux CI images bake in
-# (see nix/docker). Exported onto PATH rather than entered with `nix develop`:
-# the composite actions below run plain `bash` and would escape a dev shell.
-
-runs:
-  using: composite
-
-  steps:
-    - name: Build the CI environment
-      id: build
-      shell: bash
-      env:
-        # --out-link doubles as a GC root for the length of the job.
-        OUT_LINK: ${{ runner.temp }}/xrpld-ci-env
-      run: |
-        # --extra-experimental-features: flakes may not be on in the runner's nix.conf.
-        nix --extra-experimental-features "nix-command flakes" \
-            build .#default --out-link "${OUT_LINK}" --print-build-logs
-        echo "path=$(readlink -f "${OUT_LINK}")" >>"${GITHUB_OUTPUT}"
-
-    - name: Export the environment
-      shell: bash
-      env:
-        ENV_PATH: ${{ steps.build.outputs.path }}
-      run: |
-        echo "${ENV_PATH}/bin" >>"${GITHUB_PATH}"
-
-        # Already KEY=VALUE per line. See `darwinEnv` in nix/ci-env.nix.
-        ENV_FILE="${ENV_PATH}/share/xrpld-ci-env/env"
-        if [ -f "${ENV_FILE}" ]; then
-            cat "${ENV_FILE}" >>"${GITHUB_ENV}"
-        fi
-
-        # XrplSanity.cmake otherwise rejects a Nix compiler as one that leaked.
-        echo "XRPL_DEVSHELL=ci-env" >>"${GITHUB_ENV}"
-
-        # Unlike the Linux nix images, macOS needs no SSL_CERT_FILE: it has its
-        # own trust store, and pinning would break TLS to hosts relying on it.
-
-        # In RUNNER_TEMP, which the runner empties per job, like the `.conan2`
-        # prepare-runner hands the system toolchain - but under its own name:
-        # that Conan is a different version, and the two would migrate each
-        # other's cache.
-        echo "CONAN_HOME=${RUNNER_TEMP}/.conan2-nix" >>"${GITHUB_ENV}"
-
-    # Config, profiles and remote, exactly as the dev shell sets them up on
-    # entry; the `setup-conan` action is skipped for this toolchain.
-    - name: Setup Conan
-      shell: bash
-      run: ./conan/init.sh
-
-    # `Check tools` runs later but swallows failures; a bad export would just
-    # build with the system toolchain.
-    - name: Verify the toolchain resolves into the Nix store
-      shell: bash
-      run: |
-        for tool in clang clang++ cmake ninja conan; do
-            path="$(command -v "${tool}" || true)"
-            echo "${tool} -> ${path:-<not found>}"
-            case "${path}" in
-                /nix/store/*) ;;
-                *)
-                    echo "::error::${tool} does not resolve into the Nix store"
-                    exit 1
-                    ;;
-            esac
-        done

.github/dependabot.yml

@@ -4,8 +4,7 @@ updates:
     directories:
       - /
       - .github/actions/build-deps/
-      - .github/actions/cargo-cache/
-      - .github/actions/release-info/
+      - .github/actions/generate-version/
       - .github/actions/set-compiler-env/
       - .github/actions/setup-conan/
     schedule:
@@ -20,19 +19,3 @@ updates:
       github-actions:
         patterns:
           - "*"
-
-  - package-ecosystem: cargo
-    directory: /crates
-    schedule:
-      interval: weekly
-      day: monday
-      time: "04:00"
-      timezone: Etc/GMT
-    commit-message:
-      prefix: "chore: [DEPENDABOT] "
-    target-branch: develop
-    open-pull-requests-limit: 10
-    groups:
-      rust-dependencies:
-        patterns:
-          - "*"

.github/pull_request_template.md

@@ -18,7 +18,7 @@ If too broad, please consider splitting into multiple PRs.
 If there is a relevant task or issue, please link it here.
 -->
 
-## Context of Change
+### Context of Change
 
 <!--
 Please include the context of a change.
@@ -29,7 +29,7 @@ If a refactor, how is this better than the previous implementation?
 If there is a spec or design document for this feature, please link it here.
 -->
 
-## API Impact
+### API Impact
 
 <!--
 Please check [x] relevant options, delete irrelevant ones.

.github/scripts/levelization/results/ordering.txt

@@ -82,6 +82,7 @@ test.app > xrpl.tx
 test.basics > test.jtx
 test.basics > xrpl.basics
 test.basics > xrpl.core
+test.basics > xrpld.rpc
 test.basics > xrpl.json
 test.basics > xrpl.protocol
 test.beast > xrpl.basics
@@ -112,7 +113,6 @@ test.jtx > xrpl.config
 test.jtx > xrpl.core
 test.jtx > xrpld.app
 test.jtx > xrpld.core
-test.jtx > xrpld.overlay
 test.jtx > xrpld.rpc
 test.jtx > xrpl.json
 test.jtx > xrpl.ledger
@@ -194,9 +194,6 @@ tests.libxrpl > xrpl.resource
 tests.libxrpl > xrpl.server
 tests.libxrpl > xrpl.shamap
 tests.libxrpl > xrpl.tx
-tests.xrpld > xrpld.rpc
-tests.xrpld > xrpl.json
-tests.xrpld > xrpl.protocol
 xrpl.conditions > xrpl.basics
 xrpl.conditions > xrpl.protocol
 xrpl.config > xrpl.basics
@@ -289,10 +286,10 @@ xrpld.perflog > xrpl.basics
 xrpld.perflog > xrpl.config
 xrpld.perflog > xrpl.core
 xrpld.perflog > xrpld.app
+xrpld.perflog > xrpld.rpc
 xrpld.perflog > xrpl.json
 xrpld.perflog > xrpl.nodestore
 xrpld.perflog > xrpl.protocol
-xrpld.perflog > xrpl.server
 xrpld.rpc > xrpl.basics
 xrpld.rpc > xrpl.config
 xrpld.rpc > xrpl.core

.github/scripts/releasing/check-merge-back-commits.sh

@@ -1,40 +0,0 @@
-#!/usr/bin/env bash
-
-# Exit the script as soon as an error occurs.
-set -euo pipefail
-
-# This script fails if <head> merges a release back into <base>,
-# but also adds commits that aren't on a release or staging branch, see RELEASING.md.
-# Merge commits are allowed.
-# Usage: .github/scripts/releasing/check-merge-back-commits.sh <base> <head>
-
-if [ "$#" -ne 2 ]; then
-    echo "Usage: $0 <base> <head>"
-    exit 1
-fi
-
-BASE=$1
-HEAD=$2
-
-SCRIPT_DIR=$(dirname "${BASH_SOURCE[0]}")
-# shellcheck source=.github/scripts/releasing/common.sh
-source "${SCRIPT_DIR}/common.sh"
-load_release_branches
-
-# A PR is a merge-back if some of its commits are on a release or staging branch.
-PR_COUNT=$(git rev-list --no-merges --count "${BASE}..${HEAD}")
-NEW_COUNT=$(git rev-list --no-merges --count "${BASE}..${HEAD}" --not "${BRANCHES[@]}")
-if ((NEW_COUNT == PR_COUNT)); then
-    echo "This PR doesn't merge a release back."
-    exit 0
-fi
-if ((NEW_COUNT == 0)); then
-    echo "This merge-back adds no commits of its own."
-    exit 0
-fi
-
-echo "This PR merges a release back, but also adds commits that aren't on a release or staging branch:"
-git log --no-merges --format='  %h %s' "${BASE}..${HEAD}" --not "${BRANCHES[@]}"
-echo
-echo "Make these changes in a separate PR, see RELEASING.md."
-exit 1

.github/scripts/releasing/check-no-copied-release-commits.sh

@@ -1,46 +0,0 @@
-#!/usr/bin/env bash
-
-# Exit the script as soon as an error occurs.
-set -euo pipefail
-
-# This script fails if the commits in <base>..<head> copy commits from a release or staging branch
-# (e.g. by rebasing or cherry-picking them) instead of merging that branch, see RELEASING.md.
-# Commits are compared by patch-id,
-# and only against release and staging commits that <head> does not already contain.
-# Usage: .github/scripts/releasing/check-no-copied-release-commits.sh <base> <head>
-
-if [ "$#" -ne 2 ]; then
-    echo "Usage: $0 <base> <head>"
-    exit 1
-fi
-
-BASE=$1
-HEAD=$2
-
-patch_ids() {
-    git log --no-merges --patch --no-color --no-ext-diff "$@" | git patch-id --stable | sort
-}
-
-SCRIPT_DIR=$(dirname "${BASH_SOURCE[0]}")
-# shellcheck source=.github/scripts/releasing/common.sh
-source "${SCRIPT_DIR}/common.sh"
-load_release_branches
-
-# Each line is "<patch-id> <commit>".
-RELEASE_PATCHES=$(patch_ids "${BRANCHES[@]}" --not "${HEAD}")
-PR_PATCHES=$(patch_ids "${BASE}..${HEAD}")
-
-# Each line is "<patch-id> <release commit> <PR commit>".
-COPIES=$(join <(echo "${RELEASE_PATCHES}") <(echo "${PR_PATCHES}"))
-if [ -z "${COPIES}" ]; then
-    echo "No copied release commits found."
-    exit 0
-fi
-
-echo "These commits copy release commits instead of merging them:"
-while read -r _ RELEASE_COMMIT PR_COMMIT; do
-    echo "  $(git log -1 --format='%h %s' "${PR_COMMIT}") (copies ${RELEASE_COMMIT:0:10})"
-done <<<"${COPIES}"
-echo
-echo "Merge the release tag (or branch) instead, see RELEASING.md."
-exit 1

.github/scripts/releasing/check-no-merge-back.sh

@@ -1,38 +0,0 @@
-#!/usr/bin/env bash
-
-# Exit the script as soon as an error occurs.
-set -euo pipefail
-
-# This script fails if <head> contains release or staging commits that <base> does not,
-# i.e. if <head> merges a release back into <base>.
-# Used in the merge queue, which squashes PRs and would drop the merge commit, see RELEASING.md.
-# Usage: .github/scripts/releasing/check-no-merge-back.sh <base> <head>
-
-if [ "$#" -ne 2 ]; then
-    echo "Usage: $0 <base> <head>"
-    exit 1
-fi
-
-BASE=$1
-HEAD=$2
-
-SCRIPT_DIR=$(dirname "${BASH_SOURCE[0]}")
-# shellcheck source=.github/scripts/releasing/common.sh
-source "${SCRIPT_DIR}/common.sh"
-load_release_branches
-
-RELEASE_COMMITS=$(git rev-list "${BRANCHES[@]}" --not "${BASE}")
-HEAD_COMMITS=$(git rev-list "${BASE}..${HEAD}")
-# The release commits in <head>, newest first.
-MERGED=$(grep -xF -f <(echo "${RELEASE_COMMITS}") <<<"${HEAD_COMMITS}" || true)
-if [ -z "${MERGED}" ]; then
-    echo "No release commits are merged back."
-    exit 0
-fi
-
-echo "This PR merges $(wc -l <<<"${MERGED}" | tr -d ' ') release commits back, e.g.:"
-head -5 <<<"${MERGED}" | xargs git log --no-walk --format='  %h %s'
-echo
-echo "Merge-backs must not go through the merge queue, which squashes them."
-echo "Fast-forward develop to the PR branch instead, see RELEASING.md."
-exit 1

.github/scripts/releasing/check-releases-merged.sh

@@ -1,46 +0,0 @@
-#!/usr/bin/env bash
-
-# Exit the script as soon as an error occurs.
-set -euo pipefail
-
-# This script fails if a final release (a tag like 3.4.0) on a release branch
-# is not merged back into <develop> within a few days, see RELEASING.md.
-# Usage: .github/scripts/releasing/check-releases-merged.sh <develop>
-
-if [ "$#" -ne 1 ]; then
-    echo "Usage: $0 <develop>"
-    exit 1
-fi
-
-DEVELOP=$1
-GRACE_DAYS=3
-
-mapfile -t MERGED_ARGS < <(git for-each-ref --format='--merged=%(refname)' 'refs/remotes/*/release/*')
-if [ "${#MERGED_ARGS[@]}" -eq 0 ]; then
-    echo "Error: No release branches found."
-    exit 1
-fi
-
-# Tags on a release branch that <develop> does not contain.
-TAGS=$(git for-each-ref --format='%(refname:short) %(creatordate:unix)' \
-    "${MERGED_ARGS[@]}" --no-merged="${DEVELOP}" 'refs/tags/[0-9]*')
-
-MISSING=0
-while read -r TAG CREATED; do
-    if ! [[ "${TAG}" =~ ^[0-9]+\.[0-9]+\.[0-9]+$ ]]; then
-        continue
-    fi
-    if (($(date +%s) - CREATED < GRACE_DAYS * 86400)); then
-        echo "${TAG}: not merged yet, still within the ${GRACE_DAYS}-day grace period."
-    else
-        echo "${TAG}: not merged into develop."
-        MISSING=1
-    fi
-done <<<"${TAGS}"
-
-if [ "${MISSING}" -ne 0 ]; then
-    echo
-    echo "Merge the missing releases back into develop, see RELEASING.md."
-    exit 1
-fi
-echo "No releases past the grace period are missing from develop."

.github/scripts/releasing/common.sh

@@ -1,12 +0,0 @@
-# shellcheck shell=bash
-
-# Helpers shared by the release checks in this directory, see RELEASING.md.
-
-# Sets BRANCHES to all release and staging branches, and fails if there are none.
-load_release_branches() {
-    mapfile -t BRANCHES < <(git for-each-ref --format='%(refname)' 'refs/remotes/*/release/*' 'refs/remotes/*/staging/*')
-    if [ "${#BRANCHES[@]}" -eq 0 ]; then
-        echo "Error: No release or staging branches found."
-        exit 1
-    fi
-}

.github/scripts/rename/binary.sh

@@ -49,7 +49,7 @@ ${SED_COMMAND} -i -E 's@ripple/xrpld@XRPLF/rippled@g' BUILD.md
 ${SED_COMMAND} -i -E 's@XRPLF/xrpld@XRPLF/rippled@g' BUILD.md
 ${SED_COMMAND} -i -E 's@xrpld \(`xrpld`\)@xrpld@g' BUILD.md
 ${SED_COMMAND} -i -E 's@XRPLF/xrpld@XRPLF/rippled@g' CONTRIBUTING.md
-${SED_COMMAND} -i -E 's@XRPLF/xrpld@XRPLF/rippled@g' docs/install.md
+${SED_COMMAND} -i -E 's@XRPLF/xrpld@XRPLF/rippled@g' docs/build/install.md
 
 popd
 echo "Processing complete."

.github/scripts/rename/config.sh

@@ -62,7 +62,7 @@ ${SED_COMMAND} -i 's@ripple/@xrpld/@g' src/test/core/Config_test.cpp
 ${SED_COMMAND} -i 's/Rippled/File/g' src/test/core/Config_test.cpp
 
 # Restore the old config file name in the code that maintains support for now.
-${SED_COMMAND} -i 's/kConfigLegacyName = "xrpld.cfg"/kConfigLegacyName = "rippled.cfg"/g' src/xrpld/core/Config.h
+${SED_COMMAND} -i 's/kConfigLegacyName = "xrpld.cfg"/kConfigLegacyName = "rippled.cfg"/g' src/xrpld/core/detail/Config.cpp
 
 # Restore an URL.
 ${SED_COMMAND} -i 's/connect-your-xrpld-to-the-xrp-test-net.html/connect-your-rippled-to-the-xrp-test-net.html/g' cfg/xrpld-example.cfg

.github/scripts/rename/docs.sh

@@ -77,8 +77,8 @@ ${SED_COMMAND} -i 's/Ripple integrators/XRPL developers/' README.md
 ${SED_COMMAND} -i 's/sanitizer-configuration-for-rippled/sanitizer-configuration-for-xrpld/' docs/build/sanitizers.md
 ${SED_COMMAND} -i 's/rippled/xrpld/g' .github/scripts/levelization/README.md
 ${SED_COMMAND} -i 's/rippled/xrpld/g' .github/scripts/strategy-matrix/generate.py
-${SED_COMMAND} -i 's@/rippled@/xrpld@g' docs/install.md
-${SED_COMMAND} -i 's@github.com/XRPLF/xrpld@github.com/XRPLF/rippled@g' docs/install.md
+${SED_COMMAND} -i 's@/rippled@/xrpld@g' docs/build/install.md
+${SED_COMMAND} -i 's@github.com/XRPLF/xrpld@github.com/XRPLF/rippled@g' docs/build/install.md
 ${SED_COMMAND} -i 's/rippled/xrpld/g' docs/Doxyfile
 ${SED_COMMAND} -i 's/ripple_basics/basics/' include/xrpl/basics/CountedObject.h
 ${SED_COMMAND} -i 's/<ripple/<xrpl/' include/xrpl/protocol/AccountID.h
@@ -90,7 +90,7 @@ ${SED_COMMAND} -i 's/www.ripple.com/www.xrpl.org/g' src/test/protocol/Seed_test.
 # Restore specific changes.
 ${SED_COMMAND} -i 's@b5efcc/src/xrpld@b5efcc/src/ripple@' include/xrpl/protocol/README.md
 ${SED_COMMAND} -i 's/dbPrefix_ = "xrpldb"/dbPrefix_ = "rippledb"/' src/xrpld/app/misc/SHAMapStoreImp.h # cspell: disable-line
-${SED_COMMAND} -i 's/kConfigLegacyName = "xrpld.cfg"/kConfigLegacyName = "rippled.cfg"/' src/xrpld/core/Config.h
+${SED_COMMAND} -i 's/kConfigLegacyName = "xrpld.cfg"/kConfigLegacyName = "rippled.cfg"/' src/xrpld/core/detail/Config.cpp
 
 popd
 echo "Renaming complete."

.github/scripts/strategy-matrix/generate.py

@@ -7,21 +7,7 @@ from pathlib import Path
 
 THIS_DIR = Path(__file__).parent.resolve()
 
-_BASE_CMAKE_ARGS = [
-    "-Dtests=ON",
-    "-Dwerr=ON",
-    "-Dxrpld=ON",
-    "-Dwextra=ON",
-    "-Drust=ON",
-]
-
-# The package formats a config can be packaged as, each with its own
-# install-test job in reusable-package.yml.
-PACKAGE_TYPES = ("deb", "rpm")
-
-# The package name a variant suffixes, as build_pkg.py's BASE_NAME spells it:
-# the two have to agree, or the artifact globs miss what was built.
-BASE_NAME = "xrpld"
+_BASE_CMAKE_ARGS = ["-Dtests=ON", "-Dwerr=ON", "-Dxrpld=ON", "-Dwextra=ON"]
 
 # Maps sanitizer names (as used in cmake) to short config-name suffixes.
 _SANITIZER_SUFFIX: dict[str, str] = {
@@ -31,19 +17,6 @@ _SANITIZER_SUFFIX: dict[str, str] = {
 }
 
 
-def config_name(
-    distro: str,
-    compiler: str,
-    build_type: str,
-    arch: str,
-    suffix: str = "",
-    sanitizer: str = "",
-) -> str:
-    """Name a config. Its artifacts are named after it, so packaging reuses this."""
-    parts = [s for s in [suffix, _SANITIZER_SUFFIX.get(sanitizer, "")] if s]
-    return "-".join([f"{distro}-{compiler}-{build_type.lower()}-{arch}", *parts])
-
-
 def get_cmake_args(build_type: str, extra_args: str) -> str:
     """Get the full list of CMake arguments for a config."""
     args = _BASE_CMAKE_ARGS.copy()
@@ -58,37 +31,17 @@ def get_cmake_args(build_type: str, extra_args: str) -> str:
 
 
 # Every config must declare 'minimal'. Minimal configs form the reduced matrix
-# built for pull requests by default; the full matrix adds the rest.
+# built for pull requests by default; the full matrix adds the rest. Packaging
+# configs declare it too, but packaging is gated in the workflow, not by it.
 #
-# Configs may also opt into 'benchmark' to smoke-run the benchmarks, or carry a
-# 'package' map to be packaged as well. Note that either applies to every entry
-# a config expands into, so only set them on configs that expand to a single
-# combination.
-
-
-@dataclasses.dataclass
-class PackageConfig:
-    """The 'package' map of a config whose binaries are also packaged."""
-
-    type: str  # has to match what the image provides
-    # The packaging container image: a vanilla distro image, not the nix image
-    # the config itself builds in.
-    image: str
-    # A flavour of the package, named xrpld-<variant>, for a config whose
-    # binaries are not the plain release build. A variant needs no counterpart
-    # in the other format.
-    variant: str = ""
-
-    def __post_init__(self) -> None:
-        assert self.type in PACKAGE_TYPES, (
-            f"unsupported package type {self.type!r}: "
-            f"use one of {', '.join(PACKAGE_TYPES)}."
-        )
+# Configs may also opt into 'benchmark' to smoke-run the benchmarks. Note that
+# the flag applies to every entry a config expands into, so only set it on
+# configs that expand to a single combination.
 
 
 @dataclasses.dataclass
 class LinuxConfig:
-    """One entry in a linux.json 'configs' array."""
+    """One entry in linux.json's 'configs' or 'package_configs' arrays."""
 
     compiler: list[str]
     build_type: list[str]
@@ -98,11 +51,7 @@ class LinuxConfig:
     sanitizers: list[str] = dataclasses.field(default_factory=list)
     suffix: str = ""
     extra_cmake_args: str = ""
-    package: PackageConfig | None = None  # set to also package this config
-
-    def __post_init__(self) -> None:
-        if isinstance(self.package, dict):
-            self.package = PackageConfig(**self.package)
+    image: str = ""  # only used by package_configs entries
 
 
 @dataclasses.dataclass
@@ -111,16 +60,22 @@ class LinuxFile:
 
     image_tag: str
     configs: dict[str, list[LinuxConfig]]  # distro → configs
+    package_configs: dict[str, list[LinuxConfig]]  # distro → packaging configs
 
     @classmethod
     def load(cls, path: Path) -> "LinuxFile":
         data = json.loads(path.read_text())
+
+        def parse(section: dict) -> dict[str, list[LinuxConfig]]:
+            return {
+                distro: [LinuxConfig(**c) for c in cfgs]
+                for distro, cfgs in section.items()
+            }
+
         return cls(
             image_tag=data["image_tag"],
-            configs={
-                distro: [LinuxConfig(**c) for c in cfgs]
-                for distro, cfgs in data["configs"].items()
-            },
+            configs=parse(data["configs"]),
+            package_configs=parse(data.get("package_configs", {})),
         )
 
 
@@ -133,9 +88,6 @@ class PlatformConfig:
     build_only: bool = False  # if true, skip tests (e.g. macos/Windows Debug)
     benchmark: bool = False  # if true, smoke-run the benchmarks after testing
     extra_cmake_args: str = ""
-    # "" is the runner's system compiler, "nix" the flake's CI environment.
-    # macOS only: Linux always builds in a Nix image, Windows has no Nix.
-    toolchain: str = ""
 
     def __post_init__(self) -> None:
         if isinstance(self.build_type, str):
@@ -185,7 +137,6 @@ class MatrixEntry:
     sanitizers: str
     image: str = ""  # container image; empty for macOS/Windows (runs natively)
     compiler: str = ""  # compiler name ("gcc" or "clang"); empty for macOS/Windows
-    toolchain: str = ""  # "nix" for the flake's CI environment; see PlatformConfig
 
 
 @dataclasses.dataclass
@@ -195,9 +146,7 @@ class PackagingEntry:
     xrpld_artifact_name: str
     validator_keys_artifact_name: str
     image: str
-    package_type: str  # "deb" or "rpm"; drives the format-specific steps
-    package_variant: str  # passed to build_pkg.py --variant; empty for xrpld
-    package_name: str  # the name it builds under, which the artifact globs use
+    distro: str  # e.g. "debian" or "rhel"; drives package-format-specific steps
 
 
 # ---------------------------------------------------------------------------
@@ -238,9 +187,13 @@ def expand_linux_matrix(linux: LinuxFile, minimal: bool) -> list[MatrixEntry]:
                 effective_sanitizers,
                 effective_archs.items(),
             ):
-                name = config_name(
-                    distro, compiler, build_type, arch, cfg.suffix, sanitizer
-                )
+                name = f"{distro}-{compiler}-{build_type.lower()}-{arch}"
+                suffix_parts = [
+                    s for s in [cfg.suffix, _SANITIZER_SUFFIX.get(sanitizer, "")] if s
+                ]
+                if suffix_parts:
+                    name += "-" + "-".join(suffix_parts)
+
                 entries.append(
                     MatrixEntry(
                         config_name=name,
@@ -260,59 +213,33 @@ def expand_linux_matrix(linux: LinuxFile, minimal: bool) -> list[MatrixEntry]:
 
 
 def expand_linux_packaging(linux: LinuxFile) -> list[PackagingEntry]:
-    """Generate the packaging matrix from the configs that carry a 'package' map.
+    """Generate the packaging matrix from a LinuxFile's package_configs section.
 
-    Packaging consumes the binaries that config's build job uploaded, so the
-    artifact names come from the same config name, and a packaged config is one
-    that passes -Dvalidator_keys=ON.
+    Packaging uses vanilla distro images (debian:bookworm, ubi9, …) instead of
+    the nix-based build images, because deb/rpm tooling (debhelper, rpm-build)
+    is taken from the distro's archive rather than from nixpkgs. Each config
+    entry carries its own 'image'.
 
-    Packaging itself runs in vanilla distro images (debian:trixie, almalinux:10)
-    instead of the nix-based build images, because deb/rpm tooling (debhelper,
-    rpm-build) is taken from the distro's archive rather than from nixpkgs.
+    The artifact names must match what the build job uploads: one artifact per
+    binary, each named after the build config.
     """
     entries = []
-    for distro, configs in linux.configs.items():
+    for distro, configs in linux.package_configs.items():
         for cfg in configs:
-            if cfg.package is None:
-                continue
-            for compiler, build_type, arch in itertools.product(
-                cfg.compiler, cfg.build_type, cfg.arch
-            ):
-                # The packaging workflow hardcodes an amd64 runner.
-                assert arch == "amd64", f"cannot package {distro} on {arch}"
-                name = config_name(distro, compiler, build_type, arch, cfg.suffix)
+            for compiler, build_type in itertools.product(cfg.compiler, cfg.build_type):
+                config_name = f"{distro}-{compiler}-{build_type.lower()}-amd64"
                 entries.append(
                     PackagingEntry(
-                        xrpld_artifact_name=f"xrpld-{name}",
-                        validator_keys_artifact_name=f"validator-keys-{name}",
-                        image=cfg.package.image,
-                        package_type=cfg.package.type,
-                        package_variant=cfg.package.variant,
-                        package_name=(
-                            f"{BASE_NAME}-{cfg.package.variant}"
-                            if cfg.package.variant
-                            else BASE_NAME
-                        ),
+                        xrpld_artifact_name=f"xrpld-{config_name}",
+                        validator_keys_artifact_name=f"validator-keys-{config_name}",
+                        image=cfg.image,
+                        distro=distro,
                     )
                 )
 
     return entries
 
 
-def package_names_by_type(entries: list[PackagingEntry]) -> dict[str, list[str]]:
-    """The names of the packages in 'entries', keyed by format.
-
-    Derived from the packaging matrix rather than listed again, so the packages
-    the install-test jobs look for are the packages that were built.
-    """
-    return {
-        package_type: sorted(
-            {e.package_name for e in entries if e.package_type == package_type}
-        )
-        for package_type in PACKAGE_TYPES
-    }
-
-
 def expand_platform_matrix(pf: PlatformFile, minimal: bool) -> list[MatrixEntry]:
     """Expand a PlatformFile (macOS or Windows) into matrix entries.
 
@@ -326,12 +253,9 @@ def expand_platform_matrix(pf: PlatformFile, minimal: bool) -> list[MatrixEntry]
         if minimal and not cfg.minimal:
             continue
         for build_type in cfg.build_type:
-            name = f"{platform_name}-{arch}-{build_type.lower()}"
-            if cfg.toolchain:
-                name += f"-{cfg.toolchain}"
             entries.append(
                 MatrixEntry(
-                    config_name=name,
+                    config_name=f"{platform_name}-{arch}-{build_type.lower()}",
                     cmake_args=get_cmake_args(build_type, cfg.extra_cmake_args),
                     cmake_target="install" if is_windows else "all",
                     build_only=cfg.build_only,
@@ -339,7 +263,6 @@ def expand_platform_matrix(pf: PlatformFile, minimal: bool) -> list[MatrixEntry]
                     build_type=build_type,
                     architecture=Architecture(platform=pf.platform, runner=pf.runner),
                     sanitizers="",
-                    toolchain=cfg.toolchain,
                 )
             )
     return entries
@@ -381,10 +304,6 @@ if __name__ == "__main__":
 
     if args.packaging:
         matrix = expand_linux_packaging(LinuxFile.load(THIS_DIR / "linux.json"))
-        # One list per format, so each install-test job installs the packages its
-        # own format produced.
-        for package_type, names in package_names_by_type(matrix).items():
-            print(f"{package_type}_package_names={json.dumps(names)}")
     else:
         if args.config in ("linux", None):
             matrix += expand_linux_matrix(

.github/scripts/strategy-matrix/linux.json

@@ -1,5 +1,5 @@
 {
-  "image_tag": "sha-060957e",
+  "image_tag": "sha-fecfc0c",
   "configs": {
     "ubuntu": [
       {
@@ -71,24 +71,7 @@
         "build_type": ["Release"],
         "arch": ["amd64"],
         "minimal": false,
-        "extra_cmake_args": "-Dvalidator_keys=ON",
-        "package": {
-          "type": "deb",
-          "image": "ghcr.io/xrplf/xrpld/packaging-debian:sha-3a2d19f"
-        }
-      },
-      {
-        "compiler": ["gcc"],
-        "build_type": ["Release"],
-        "arch": ["amd64"],
-        "minimal": false,
-        "suffix": "assert",
-        "extra_cmake_args": "-Dvalidator_keys=ON -Dassert=ON",
-        "package": {
-          "type": "deb",
-          "image": "ghcr.io/xrplf/xrpld/packaging-debian:sha-3a2d19f",
-          "variant": "assert"
-        }
+        "extra_cmake_args": "-Dvalidator_keys=ON"
       }
     ],
 
@@ -98,11 +81,28 @@
         "build_type": ["Release"],
         "arch": ["amd64"],
         "minimal": false,
-        "extra_cmake_args": "-Dvalidator_keys=ON",
-        "package": {
-          "type": "rpm",
-          "image": "ghcr.io/xrplf/xrpld/packaging-rhel:sha-3a2d19f"
-        }
+        "extra_cmake_args": "-Dvalidator_keys=ON"
+      }
+    ]
+  },
+  "package_configs": {
+    "debian": [
+      {
+        "compiler": ["gcc"],
+        "build_type": ["Release"],
+        "arch": ["amd64"],
+        "minimal": false,
+        "image": "ghcr.io/xrplf/xrpld/packaging-debian:sha-577d745"
+      }
+    ],
+
+    "rhel": [
+      {
+        "compiler": ["gcc"],
+        "build_type": ["Release"],
+        "arch": ["amd64"],
+        "minimal": false,
+        "image": "ghcr.io/xrplf/xrpld/packaging-rhel:sha-577d745"
       }
     ]
   }

.github/scripts/strategy-matrix/macos.json

@@ -12,19 +12,6 @@
       "extra_cmake_args": "-DCMAKE_POLICY_VERSION_MINIMUM=3.5",
       "build_only": true,
       "minimal": false
-    },
-    {
-      "build_type": "Release",
-      "extra_cmake_args": "-DCMAKE_POLICY_VERSION_MINIMUM=3.5",
-      "toolchain": "nix",
-      "minimal": false
-    },
-    {
-      "build_type": "Debug",
-      "extra_cmake_args": "-DCMAKE_POLICY_VERSION_MINIMUM=3.5",
-      "toolchain": "nix",
-      "build_only": true,
-      "minimal": false
     }
   ]
 }

.github/workflows/build-nix-images.yml

@@ -5,13 +5,14 @@ on:
     branches:
       - develop
     paths:
+      - ".github/workflows/build-nix-images.yml"
       - "flake.nix"
       - "flake.lock"
       - "rust-toolchain.toml"
       - "nix/**"
       - "!nix/docker/README.md"
       - "!nix/devshell.nix"
-      - "!nix/check-tools/**"
+      - "bin/check-tools.sh"
       - "bin/default-loader-path.sh"
       - "bin/install-sanitizer-libs.sh"
   pull_request:
@@ -23,7 +24,6 @@ on:
       - "nix/**"
       - "!nix/docker/README.md"
       - "!nix/devshell.nix"
-      - "!nix/check-tools/**"
       - "bin/check-tools.sh"
       - "bin/default-loader-path.sh"
       - "bin/install-sanitizer-libs.sh"
@@ -58,7 +58,7 @@ jobs:
             base_image: debian:bookworm
           - name: rhel
             base_image: registry.access.redhat.com/ubi9/ubi:latest
-    uses: XRPLF/actions/.github/workflows/build-multiarch-image.yml@696384b292577293292daed06af0306d1b83bd7d
+    uses: XRPLF/actions/.github/workflows/build-multiarch-image.yml@9e7e4e80af9e684c116b38369add8eea64451f32
     with:
       image_name: xrpld/nix-${{ matrix.distro.name }}
       dockerfile: nix/docker/Dockerfile

.github/workflows/build-packaging-images.yml

@@ -6,13 +6,13 @@ on:
       - develop
     paths:
       - ".github/workflows/build-packaging-images.yml"
-      - "bin/install-packaging-tools.sh"
-      - "package/images/packaging/**"
+      - "package/Dockerfile"
+      - "package/install-packaging-tools.sh"
   pull_request:
     paths:
       - ".github/workflows/build-packaging-images.yml"
-      - "bin/install-packaging-tools.sh"
-      - "package/images/packaging/**"
+      - "package/Dockerfile"
+      - "package/install-packaging-tools.sh"
   workflow_dispatch:
 
 concurrency:
@@ -33,17 +33,14 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        # Newest of each distro: these images only wrap pre-built binaries, so
-        # they set no floor for consumers. build_pkg.py pins the RPM dist tag.
         distro:
           - name: debian
-            base_image: debian:trixie
-          # AlmaLinux rather than UBI, which does not ship rpm-sign.
+            base_image: debian:bookworm
           - name: rhel
-            base_image: almalinux:10
-    uses: XRPLF/actions/.github/workflows/build-multiarch-image.yml@696384b292577293292daed06af0306d1b83bd7d
+            base_image: registry.access.redhat.com/ubi9/ubi:latest
+    uses: XRPLF/actions/.github/workflows/build-multiarch-image.yml@9e7e4e80af9e684c116b38369add8eea64451f32
     with:
       image_name: xrpld/packaging-${{ matrix.distro.name }}
-      dockerfile: package/images/packaging/Dockerfile
+      dockerfile: package/Dockerfile
       base_image: ${{ matrix.distro.base_image }}
       push: ${{ github.event_name == 'push' }}

.github/workflows/build-pre-commit-image.yml

@@ -30,7 +30,7 @@ jobs:
     permissions:
       contents: read
       packages: write
-    uses: XRPLF/actions/.github/workflows/build-multiarch-image.yml@696384b292577293292daed06af0306d1b83bd7d
+    uses: XRPLF/actions/.github/workflows/build-multiarch-image.yml@9e7e4e80af9e684c116b38369add8eea64451f32
     with:
       image_name: xrpld/pre-commit
       dockerfile: bin/pre-commit/Dockerfile

.github/workflows/cargo-audit.yml

@@ -1,80 +0,0 @@
-name: Cargo audit
-
-on:
-  schedule:
-    # 06:32 UTC every Monday.
-    - cron: "32 6 * * 1"
-  push:
-    branches:
-      - "develop"
-      - "release/*"
-    paths:
-      - "crates/**/Cargo.toml"
-      - "crates/Cargo.lock"
-      - ".github/workflows/cargo-audit.yml"
-  pull_request:
-    paths:
-      - "crates/**/Cargo.toml"
-      - "crates/Cargo.lock"
-      - ".github/workflows/cargo-audit.yml"
-  workflow_dispatch:
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-
-defaults:
-  run:
-    shell: bash
-    working-directory: crates
-
-permissions:
-  contents: read
-
-jobs:
-  audit:
-    runs-on: ubuntu-latest
-    container: ghcr.io/xrplf/xrpld/nix-ubuntu:sha-060957e
-    permissions:
-      contents: read
-      # Needed to open an issue on scheduled failures.
-      issues: write
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
-
-      - name: Run cargo audit
-        id: audit
-        continue-on-error: true
-        run: |
-          set -o pipefail
-          cargo audit | tee /tmp/cargo-audit.txt
-
-      - name: Prepare issue body
-        if: ${{ steps.audit.outcome != 'success' && github.event_name == 'schedule' }}
-        run: |
-          {
-              echo "## \`cargo audit\` found advisories"
-              echo
-              echo '```'
-              cat /tmp/cargo-audit.txt
-              echo '```'
-              echo
-              echo "---"
-              echo "*This issue was automatically created by the cargo-audit workflow.*"
-          } >/tmp/cargo-audit-issue.md
-
-      - name: Create issue
-        if: ${{ steps.audit.outcome != 'success' && github.event_name == 'schedule' }}
-        uses: XRPLF/actions/create-issue@2b8bc36af85b88bca0dd7bfac2e2dc05f94ad712
-        with:
-          title: "cargo audit found vulnerabilities"
-          body_file: /tmp/cargo-audit-issue.md
-          labels: "Bug,Security"
-
-      - name: Fail if advisories were found
-        if: ${{ steps.audit.outcome != 'success' }}
-        run: |
-          echo "cargo audit found advisories!"
-          cat /tmp/cargo-audit.txt
-          exit 1

.github/workflows/check-pr-description.yml

@@ -13,6 +13,7 @@ on:
       - ready_for_review
     branches:
       - develop
+      - "release-*"
       - "release/*"
       - "staging/*"
 

.github/workflows/check-pr-title.yml

@@ -13,6 +13,7 @@ on:
       - ready_for_review
     branches:
       - develop
+      - "release-*"
       - "release/*"
       - "staging/*"
 

.github/workflows/check-releases-merged.yml

@@ -1,60 +0,0 @@
-# This workflow checks that every final release on a release branch
-# has been merged back into develop, see RELEASING.md.
-name: Check releases merged
-
-on:
-  schedule:
-    # 06:47 UTC every Monday.
-    - cron: "47 6 * * 1"
-  push:
-    branches:
-      - "develop"
-  workflow_dispatch:
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-
-defaults:
-  run:
-    shell: bash
-
-env:
-  OUTPUT_FILE: /tmp/releases-merged.txt
-  ISSUE_FILE: /tmp/releases-merged-issue.md
-
-jobs:
-  releases-merged:
-    runs-on: ubuntu-latest
-    permissions:
-      contents: read
-      # Needed to open an issue on scheduled failures.
-      issues: write
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
-        with:
-          # The check needs the full history of develop, the release branches and tags.
-          fetch-depth: 0
-
-      - name: Check releases are merged into develop
-        run: |
-          set -o pipefail
-          .github/scripts/releasing/check-releases-merged.sh origin/develop | tee "${OUTPUT_FILE}"
-
-      - name: Prepare issue body
-        if: ${{ failure() && github.event_name == 'schedule' && github.repository == 'XRPLF/rippled' }}
-        run: |
-          {
-              echo '```'
-              cat "${OUTPUT_FILE}"
-              echo '```'
-          } >"${ISSUE_FILE}"
-
-      - name: Create issue
-        if: ${{ failure() && github.event_name == 'schedule' && github.repository == 'XRPLF/rippled' }}
-        uses: XRPLF/actions/create-issue@2b8bc36af85b88bca0dd7bfac2e2dc05f94ad712
-        with:
-          title: "Releases not merged back into develop"
-          body_file: ${{ env.ISSUE_FILE }}
-          labels: "Bug"

.github/workflows/check-tools.yml

@@ -79,7 +79,7 @@ jobs:
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
       - name: Prepare runner
-        uses: XRPLF/actions/prepare-runner@b3e255d74d785d053e4903da8ac90983cd7d9e82
+        uses: XRPLF/actions/prepare-runner@c00c22ada3bd6bcda48fcb0d62fbbab49fec8a0f
         with:
           enable_ccache: false
 

.github/workflows/on-pr.yml

@@ -77,29 +77,24 @@ jobs:
 
             # Keep the paths below in sync with those in `on-trigger.yml`.
             .github/actions/build-deps/**
-            .github/actions/release-info/**
+            .github/actions/generate-version/**
             .github/actions/setup-conan/**
-            .github/actions/setup-nix-env/**
             .github/scripts/strategy-matrix/**
             .github/workflows/reusable-build-test-config.yml
             .github/workflows/reusable-build-test.yml
             .github/workflows/reusable-check-autogen.yml
             .github/workflows/reusable-clang-tidy.yml
-            .github/workflows/reusable-package-test-install.yml
             .github/workflows/reusable-package.yml
-            .github/workflows/reusable-rust.yml
             .github/workflows/reusable-strategy-matrix.yml
             .github/workflows/reusable-test.yml
             .github/workflows/reusable-upload-recipe.yml
             .clang-tidy
             .codecov.yml
-            bin/check-nix-store-refs.sh
             bin/check-tools.sh
             bin/default-loader-path.sh
             cfg/**
             cmake/**
             conan/**
-            crates/**
             external/**
             include/**
             src/**
@@ -107,9 +102,6 @@ jobs:
             CMakeLists.txt
             conanfile.py
             conan.lock
-            flake.lock
-            flake.nix
-            nix/**
             LICENSE.md
             package/**
             README.md
@@ -150,48 +142,6 @@ jobs:
     if: ${{ needs.should-run.outputs.go == 'true' }}
     uses: ./.github/workflows/reusable-check-rename.yml
 
-  # Runs regardless of the changed files.
-  # PRs into staging branches are skipped, since fixes may be cherry-picked between release lines.
-  check-release-commits:
-    needs: should-run
-    if: ${{ github.event.pull_request.base.ref == 'develop' || github.event.merge_group.base_ref == 'refs/heads/develop' }}
-    runs-on: ubuntu-latest
-    permissions:
-      contents: read
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
-        with:
-          # The check needs the full history of the release and staging branches.
-          fetch-depth: 0
-          persist-credentials: false
-      - name: Check for copied release commits
-        if: ${{ github.event_name == 'pull_request' }}
-        env:
-          BASE: ${{ github.event.pull_request.base.sha }}
-          HEAD: ${{ github.event.pull_request.head.sha }}
-        run: .github/scripts/releasing/check-no-copied-release-commits.sh "${BASE}" "${HEAD}"
-      # Runs even if the previous check fails, so that both problems are reported at once.
-      - name: Check merge-back has no new commits
-        if: ${{ !cancelled() && github.event_name == 'pull_request' }}
-        env:
-          BASE: ${{ github.event.pull_request.base.sha }}
-          HEAD: ${{ github.event.pull_request.head.sha }}
-        run: .github/scripts/releasing/check-merge-back-commits.sh "${BASE}" "${HEAD}"
-      # The queue squashes PRs, so check the PR's own branch, named in the queue branch.
-      - name: Check the merge queue doesn't merge a release back
-        if: ${{ github.event_name == 'merge_group' }}
-        env:
-          BASE: ${{ github.event.merge_group.base_sha }}
-          HEAD_REF: ${{ github.event.merge_group.head_ref }}
-        run: |
-          if ! [[ "${HEAD_REF}" =~ /pr-([0-9]+)-[0-9a-f]+$ ]]; then
-              echo "Error: Can't find the PR number in '${HEAD_REF}'."
-              exit 1
-          fi
-          git fetch --no-tags origin "refs/pull/${BASH_REMATCH[1]}/head"
-          .github/scripts/releasing/check-no-merge-back.sh "${BASE}" FETCH_HEAD
-
   clang-tidy:
     needs: should-run
     if: ${{ needs.should-run.outputs.go == 'true' }}
@@ -218,13 +168,6 @@ jobs:
     secrets:
       CODECOV_TOKEN: ${{ secrets.CODECOV_TOKEN }}
 
-  rust:
-    needs: should-run
-    if: ${{ needs.should-run.outputs.go == 'true' }}
-    uses: ./.github/workflows/reusable-rust.yml
-    secrets:
-      CODECOV_TOKEN: ${{ secrets.CODECOV_TOKEN }}
-
   package:
     needs: [should-run, build-test]
     # Packaging consumes the debian/rhel release binaries, which are only built
@@ -232,12 +175,6 @@ jobs:
     # matrix (i.e. not yet labeled "Ready to merge" or "Full CI build").
     if: ${{ needs.should-run.outputs.go == 'true' && (github.event_name != 'pull_request' || contains(github.event.pull_request.labels.*.name, 'Ready to merge') || contains(github.event.pull_request.labels.*.name, 'Full CI build')) }}
     uses: ./.github/workflows/reusable-package.yml
-    with:
-      # A pull request builds packages to prove they still build, and publishes
-      # nothing. Stated rather than left to the input's default, so that changing
-      # that default cannot start publishing from pull requests. No secrets are
-      # passed either, which is the second reason a publish here cannot succeed.
-      publish: false
 
   upload-recipe:
     needs:
@@ -272,10 +209,8 @@ jobs:
       - check-autogen
       - check-levelization
       - check-rename
-      - check-release-commits
       - clang-tidy
       - build-test
-      - rust
       - package
       - upload-recipe
       - notify-clio

.github/workflows/on-tag.yml

@@ -1,12 +1,5 @@
-# When a versioned tag is pushed, this workflow:
-#
-#   - builds and tests the release binaries
-#   - uploads the libxrpl recipe to the Conan remote
-#   - builds the DEB and RPM packages
-#   - publishes those packages to the XRPLF package repositories
-#
-# Nothing is published unless the build passes, which is also where CMake
-# rejects a tag that is not a valid version, e.g. 3.2.01.
+# This workflow uploads the libxrpl recipe to the Conan remote and builds
+# release packages when a versioned tag is pushed.
 name: Tag
 
 on:
@@ -25,14 +18,13 @@ defaults:
 jobs:
   upload-recipe:
     if: ${{ github.repository == 'XRPLF/rippled' }}
-    needs: build-test
     uses: ./.github/workflows/reusable-upload-recipe.yml
     secrets:
       remote_username: ${{ secrets.NEXUS_REMOTE_USERNAME }}
       remote_password: ${{ secrets.NEXUS_REMOTE_PASSWORD }}
 
   build-test:
-    if: ${{ github.repository_owner == 'XRPLF' }}
+    if: ${{ github.repository == 'XRPLF/rippled' }}
     uses: ./.github/workflows/reusable-build-test.yml
     strategy:
       fail-fast: true
@@ -45,16 +37,6 @@ jobs:
       CODECOV_TOKEN: ${{ secrets.CODECOV_TOKEN }}
 
   package:
-    if: ${{ github.repository_owner == 'XRPLF' }}
+    if: ${{ github.repository == 'XRPLF/rippled' }}
     needs: build-test
     uses: ./.github/workflows/reusable-package.yml
-    with:
-      publish: true
-    secrets:
-      remote_username: ${{ secrets.NEXUS_REMOTE_USERNAME }}
-      remote_password: ${{ secrets.NEXUS_REMOTE_PASSWORD }}
-      signing_key: ${{ secrets.NEXUS_PACKAGES_PRIVATE_KEY }}
-      dockerhub_token: ${{ secrets.DOCKERHUB_TOKEN }}
-      antithesis_docker_host: ${{ secrets.ANTITHESIS_DOCKER_HOST }}
-      antithesis_docker_path: ${{ secrets.ANTITHESIS_DOCKER_PATH }}
-      antithesis_docker_credentials: ${{ secrets.ANTITHESIS_DOCKER_CREDENTIALS }}

.github/workflows/on-trigger.yml

@@ -15,29 +15,24 @@ on:
 
       # Keep the paths below in sync with those in `on-pr.yml`.
       - ".github/actions/build-deps/**"
-      - ".github/actions/release-info/**"
+      - ".github/actions/generate-version/**"
       - ".github/actions/setup-conan/**"
-      - ".github/actions/setup-nix-env/**"
       - ".github/scripts/strategy-matrix/**"
       - ".github/workflows/reusable-build-test-config.yml"
       - ".github/workflows/reusable-build-test.yml"
       - ".github/workflows/reusable-check-autogen.yml"
       - ".github/workflows/reusable-clang-tidy.yml"
-      - ".github/workflows/reusable-package-test-install.yml"
       - ".github/workflows/reusable-package.yml"
-      - ".github/workflows/reusable-rust.yml"
       - ".github/workflows/reusable-strategy-matrix.yml"
       - ".github/workflows/reusable-test.yml"
       - ".github/workflows/reusable-upload-recipe.yml"
       - ".clang-tidy"
       - ".codecov.yml"
-      - "bin/check-nix-store-refs.sh"
       - "bin/check-tools.sh"
       - "bin/default-loader-path.sh"
       - "cfg/**"
       - "cmake/**"
       - "conan/**"
-      - "crates/**"
       - "external/**"
       - "include/**"
       - "src/**"
@@ -45,9 +40,6 @@ on:
       - "CMakeLists.txt"
       - "conanfile.py"
       - "conan.lock"
-      - "flake.lock"
-      - "flake.nix"
-      - "nix/**"
       - "LICENSE.md"
       - "package/**"
       - "README.md"
@@ -104,11 +96,6 @@ jobs:
     secrets:
       CODECOV_TOKEN: ${{ secrets.CODECOV_TOKEN }}
 
-  rust:
-    uses: ./.github/workflows/reusable-rust.yml
-    secrets:
-      CODECOV_TOKEN: ${{ secrets.CODECOV_TOKEN }}
-
   upload-recipe:
     needs: build-test
     # Only run when pushing to the develop branch.
@@ -121,15 +108,3 @@ jobs:
   package:
     needs: build-test
     uses: ./.github/workflows/reusable-package.yml
-    with:
-      # Packages are built on every trigger; only develop pushes in XRPLF/rippled
-      # publish them, matching upload-recipe above.
-      publish: ${{ github.repository == 'XRPLF/rippled' && github.event_name == 'push' && github.ref == 'refs/heads/develop' }}
-    secrets:
-      remote_username: ${{ secrets.NEXUS_REMOTE_USERNAME }}
-      remote_password: ${{ secrets.NEXUS_REMOTE_PASSWORD }}
-      signing_key: ${{ secrets.NEXUS_PACKAGES_PRIVATE_KEY }}
-      dockerhub_token: ${{ secrets.DOCKERHUB_TOKEN }}
-      antithesis_docker_host: ${{ secrets.ANTITHESIS_DOCKER_HOST }}
-      antithesis_docker_path: ${{ secrets.ANTITHESIS_DOCKER_PATH }}
-      antithesis_docker_credentials: ${{ secrets.ANTITHESIS_DOCKER_CREDENTIALS }}

.github/workflows/pre-commit.yml

@@ -14,7 +14,7 @@ on:
 jobs:
   # Call the workflow in the XRPLF/actions repo that runs the pre-commit hooks.
   run-hooks:
-    uses: XRPLF/actions/.github/workflows/pre-commit.yml@279ec358f4a1be4088be3e024b07916fa97c75b6
+    uses: XRPLF/actions/.github/workflows/pre-commit.yml@3ba08d6ddf114092891d48491fc2e26c3ba15552
     with:
       runs_on: ubuntu-latest
-      container: '{ "image": "ghcr.io/xrplf/xrpld/pre-commit:sha-473fe44" }'
+      container: '{ "image": "ghcr.io/xrplf/xrpld/pre-commit:sha-f56b79f" }'

.github/workflows/publish-docs.yml

@@ -41,13 +41,13 @@ env:
 jobs:
   build:
     runs-on: ubuntu-latest
-    container: ghcr.io/xrplf/xrpld/nix-ubuntu:sha-060957e
+    container: ghcr.io/xrplf/xrpld/nix-ubuntu:sha-fecfc0c
     steps:
       - name: Checkout repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
       - name: Prepare runner
-        uses: XRPLF/actions/prepare-runner@b3e255d74d785d053e4903da8ac90983cd7d9e82
+        uses: XRPLF/actions/prepare-runner@c00c22ada3bd6bcda48fcb0d62fbbab49fec8a0f
         with:
           enable_ccache: false
 
@@ -91,4 +91,4 @@ jobs:
     steps:
       - name: Deploy to GitHub Pages
         id: deploy
-        uses: actions/deploy-pages@368f82528645a54fb793d4d04e342629a3f51346 # v5.0.1
+        uses: actions/deploy-pages@cd2ce8fcbc39b97be8ca5fce6e763baed58fa128 # v5.0.0

.github/workflows/reusable-build-test-config.yml

@@ -69,12 +69,6 @@ on:
         type: string
         default: ""
 
-      toolchain:
-        description: 'Where the toolchain comes from ("nix" to build the flake CI environment on the runner, empty for the system one). macOS only: Linux always builds in a Nix image, and Nix has no Windows support.'
-        required: false
-        type: string
-        default: ""
-
     secrets:
       CODECOV_TOKEN:
         description: "The Codecov token to use for uploading coverage reports."
@@ -117,9 +111,6 @@ jobs:
       VOIDSTAR_ENABLED: ${{ contains(inputs.cmake_args, '-Dvoidstar=ON') }}
       VALIDATOR_KEYS_ENABLED: ${{ contains(inputs.cmake_args, '-Dvalidator_keys=ON') }}
       SANITIZERS_ENABLED: ${{ inputs.sanitizers != '' }}
-      # The binaries reusable-package.yml consumes. A private repository skips
-      # them except on a tag push, which is what produces its release packages.
-      PACKAGING_ARTIFACTS_ENABLED: ${{ github.event.repository.visibility == 'public' || startsWith(github.ref, 'refs/tags/') }}
     steps:
       - name: Cleanup workspace (macOS and Windows)
         if: ${{ runner.os == 'macOS' || runner.os == 'Windows' }}
@@ -129,15 +120,10 @@ jobs:
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
       - name: Prepare runner
-        uses: XRPLF/actions/prepare-runner@b3e255d74d785d053e4903da8ac90983cd7d9e82
+        uses: XRPLF/actions/prepare-runner@c00c22ada3bd6bcda48fcb0d62fbbab49fec8a0f
         with:
           enable_ccache: ${{ inputs.ccache_enabled }}
 
-      # Before any step that uses a build tool, composite actions included.
-      - name: Setup Nix environment
-        if: ${{ inputs.toolchain == 'nix' }}
-        uses: ./.github/actions/setup-nix-env
-
       - name: Set ccache log file
         if: ${{ inputs.ccache_enabled && runner.debug == '1' }}
         run: echo "CCACHE_LOGFILE=${{ runner.temp }}/ccache.log" >>"${GITHUB_ENV}"
@@ -162,21 +148,7 @@ jobs:
         with:
           compiler: ${{ inputs.compiler }}
 
-      - name: Use cargo artifacts cache
-        uses: ./.github/actions/cargo-cache
-        with:
-          cache-directories: ${{ env.BUILD_DIR }}/corrosion
-          key: ${{ inputs.config_name }}
-          # two workspaces here because build artifacts are located in 2 places:
-          # - crates/target when cargo is called directly
-          # - build/cargo when cargo is called by cmake
-          workspaces: |
-            crates
-            crates -> ${{ runner.os == 'Windows' && format('../{0}/x64/{1}/cargo', env.BUILD_DIR, inputs.build_type) || format('../{0}/cargo', env.BUILD_DIR) }}
-
-      # `setup-nix-env` already did this for the Nix toolchain.
       - name: Setup Conan
-        if: ${{ inputs.toolchain != 'nix' }}
         env:
           SANITIZERS: ${{ inputs.sanitizers }}
         uses: ./.github/actions/setup-conan
@@ -196,19 +168,6 @@ jobs:
         env:
           BUILD_TYPE: ${{ inputs.build_type }}
           CMAKE_ARGS: ${{ inputs.cmake_args }}
-          # GitHub creates a merge commit for a PR
-          # https://www.kenmuse.com/blog/the-many-shas-of-a-github-pull-request/
-          #
-          # We:
-          # - explicitly provide branch name
-          # - use `github.event.pull_request.head.sha` to get the SHA of last commit in the PR branch
-          #
-          # This way it works both for PRs and pushes to branches.
-          GITHUB_BRANCH_NAME: "${{ github.head_ref || github.ref_name }}"
-          GITHUB_HEAD_SHA: "${{ github.event.pull_request.head.sha || github.sha }}"
-          #
-          # If tag is being pushed, we use that version.
-          FORCE_XRPLD_VERSION: ${{ startsWith(github.ref, 'refs/tags/') && github.ref_name || '' }}
         run: |
           cmake \
               -G '${{ runner.os == 'Windows' && 'Visual Studio 18 2026' || 'Ninja' }}' \
@@ -253,25 +212,6 @@ jobs:
               --target "${CMAKE_TARGET}" \
               2>&1 | tee "${GITHUB_WORKSPACE}/build.log"
 
-      # Nothing may reference the store, so whole trees are checked - the Conan
-      # cache included, since what it holds is what gets uploaded and reused.
-      - name: Check the build output for Nix store references (Nix toolchain)
-        if: ${{ inputs.toolchain == 'nix' }}
-        run: ./bin/check-nix-store-refs.sh "${BUILD_DIR}"
-
-      - name: Check the Conan cache for Nix store references (Nix toolchain)
-        if: ${{ inputs.toolchain == 'nix' }}
-        run: ./bin/check-nix-store-refs.sh "${CONAN_HOME}"
-
-      # Only what PatchNixBinary.cmake retargets: the toolchain in the Linux
-      # images always references the store. Same condition it uses.
-      - name: Check for Nix store references (Linux)
-        if: ${{ runner.os == 'Linux' && env.SANITIZERS_ENABLED == 'false' }}
-        run: |
-          ./bin/check-nix-store-refs.sh "${BUILD_DIR}/xrpld"
-          ./bin/check-nix-store-refs.sh "${BUILD_DIR}/xrpl_tests"
-          ./bin/check-nix-store-refs.sh "${BUILD_DIR}/xrpld_tests"
-
       - name: Show ccache statistics
         if: ${{ inputs.ccache_enabled }}
         run: |
@@ -282,7 +222,7 @@ jobs:
           fi
 
       - name: Upload the binary (Linux)
-        if: ${{ env.PACKAGING_ARTIFACTS_ENABLED == 'true' && runner.os == 'Linux' }}
+        if: ${{ github.event.repository.visibility == 'public' && runner.os == 'Linux' }}
         uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
         with:
           name: xrpld-${{ inputs.config_name }}
@@ -296,7 +236,7 @@ jobs:
         run: ./validator-keys --unittest
 
       - name: Upload the validator-keys binary
-        if: ${{ env.PACKAGING_ARTIFACTS_ENABLED == 'true' && env.VALIDATOR_KEYS_ENABLED == 'true' }}
+        if: ${{ github.event.repository.visibility == 'public' && env.VALIDATOR_KEYS_ENABLED == 'true' }}
         uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
         with:
           name: validator-keys-${{ inputs.config_name }}
@@ -352,9 +292,7 @@ jobs:
       - name: Run the separate tests
         if: ${{ !inputs.build_only }}
         working-directory: ${{ runner.os == 'Windows' && format('{0}/{1}', env.BUILD_DIR, inputs.build_type) || env.BUILD_DIR }}
-        run: |
-          ./xrpl_tests
-          ./xrpld_tests
+        run: ./xrpl_tests
 
       - name: Run the embedded tests
         if: ${{ !inputs.build_only }}
@@ -385,11 +323,6 @@ jobs:
 
           LD_PRELOAD="$PRELOAD" ./xrpld --unittest --unittest-jobs "${BUILD_NPROC}" 2>&1 | tee "${GITHUB_WORKSPACE}/unittest.log"
 
-      - name: Run Rust tests
-        if: ${{ !inputs.build_only }}
-        working-directory: crates
-        run: cargo nextest run --workspace --all-features --locked --no-tests=warn
-
       # Smoke-run every benchmark module with a single repetition to confirm the
       # benchmarks still build and execute. This is a correctness check, not a
       # performance measurement, so there is nothing to gain from repeating it
@@ -455,13 +388,12 @@ jobs:
 
       - name: Upload coverage report
         if: ${{ github.repository_owner == 'XRPLF' && !inputs.build_only && env.COVERAGE_ENABLED == 'true' }}
-        uses: codecov/codecov-action@303a32d7a59b442fa8d48b6a1cc6825c09c847a5 # v7.1.1
+        uses: codecov/codecov-action@fb8b3582c8e4def4969c97caa2f19720cb33a72f # v7.0.0
         with:
           disable_search: true
           disable_telem: true
           fail_ci_if_error: true
           files: ${{ env.BUILD_DIR }}/coverage.xml
-          flags: cpp
           plugins: noop
           token: ${{ secrets.CODECOV_TOKEN }}
           verbose: true

.github/workflows/reusable-build-test.yml

@@ -51,6 +51,5 @@ jobs:
       config_name: ${{ matrix.config_name }}
       sanitizers: ${{ matrix.sanitizers }}
       compiler: ${{ matrix.compiler || '' }}
-      toolchain: ${{ matrix.toolchain || '' }}
     secrets:
       CODECOV_TOKEN: ${{ secrets.CODECOV_TOKEN }}

.github/workflows/reusable-clang-tidy.yml

@@ -27,14 +27,14 @@ jobs:
   determine-files:
     permissions:
       contents: read
-    uses: XRPLF/actions/.github/workflows/determine-tidy-files.yml@70145243b905dc3e040a61d39c00e178cfb96f71
+    uses: XRPLF/actions/.github/workflows/determine-tidy-files.yml@d041ac9f1fa9f07a4ba335eb4c1c82233fb3fef6
 
   run-clang-tidy:
     name: Run clang tidy
     needs: [determine-files]
     if: ${{ needs.determine-files.outputs.cpp_changed_files != '' || needs.determine-files.outputs.need_full_run == 'true' }}
     runs-on: ["self-hosted", "Linux", "X64", "heavy"]
-    container: "ghcr.io/xrplf/xrpld/nix-debian:sha-060957e"
+    container: "ghcr.io/xrplf/xrpld/nix-debian:sha-fecfc0c"
     permissions:
       contents: read
       issues: write
@@ -43,7 +43,7 @@ jobs:
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
       - name: Prepare runner
-        uses: XRPLF/actions/prepare-runner@b3e255d74d785d053e4903da8ac90983cd7d9e82
+        uses: XRPLF/actions/prepare-runner@c00c22ada3bd6bcda48fcb0d62fbbab49fec8a0f
         with:
           enable_ccache: false
 
@@ -59,12 +59,6 @@ jobs:
         with:
           compiler: ${{ env.COMPILER }}
 
-      - name: Use cargo artifacts cache
-        uses: ./.github/actions/cargo-cache
-        with:
-          cache-directories: ${{ env.BUILD_DIR }}/corrosion
-          workspaces: crates -> ../${{ env.BUILD_DIR }}/cargo
-
       - name: Setup Conan
         uses: ./.github/actions/setup-conan
 
@@ -86,13 +80,13 @@ jobs:
               -Dwerr=ON \
               -Dxrpld=ON \
               -Dverify_headers=ON \
-              -Drust=ON \
               ..
 
-      - name: Build clang-tidy prerequisites
+      # clang-tidy needs headers generated from proto files
+      - name: Build libxrpl.libpb
         working-directory: ${{ env.BUILD_DIR }}
         run: |
-          ninja -j ${{ steps.nproc.outputs.nproc }} tidy_prerequisites
+          ninja -j ${{ steps.nproc.outputs.nproc }} xrpl.libpb
 
       - name: Run clang tidy
         id: run_clang_tidy

.github/workflows/reusable-package-test-install.yml

@@ -1,120 +0,0 @@
-# Install one package format on every distro family it targets, one job per
-# package name and image, and run the binaries there. Called once per format by
-# reusable-package.yml, which owns the names and the image lists.
-name: Install packages
-
-on:
-  workflow_call:
-    inputs:
-      package_type:
-        description: 'The package format to install ("deb" or "rpm").'
-        required: true
-        type: string
-      package_names:
-        description: "JSON array of package names built for this format."
-        required: true
-        type: string
-      images:
-        description: "JSON array of container images to install in."
-        required: true
-        type: string
-
-defaults:
-  run:
-    shell: bash
-
-env:
-  PACKAGE_DIR: packages
-
-jobs:
-  install:
-    strategy:
-      fail-fast: false
-      matrix:
-        package_name: ${{ fromJson(inputs.package_names) }}
-        image: ${{ fromJson(inputs.images) }}
-    name: "${{ matrix.package_name }} on ${{ matrix.image }}"
-    permissions:
-      contents: read
-    runs-on: ubuntu-latest
-    container: ${{ matrix.image }}
-    timeout-minutes: 5
-
-    steps:
-      # Every package lands in one directory; the step below picks its own,
-      # which keeps this independent of the artifact names.
-      - name: Download package artifacts
-        uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
-        with:
-          pattern: "*-pkg"
-          merge-multiple: true
-          path: ${{ env.PACKAGE_DIR }}
-
-      - name: Find the package
-        id: find
-        env:
-          PACKAGE_NAME: ${{ matrix.package_name }}
-          PACKAGE_TYPE: ${{ inputs.package_type }}
-        run: |
-          # The version follows the name, separated by '_' in a DEB and '-' in an
-          # RPM. Requiring a digit after it is what keeps 'xrpld' from picking up
-          # another package, such as 'xrpld-assert'.
-          pattern="${PACKAGE_NAME}[_-][0-9]*.${PACKAGE_TYPE}"
-          package="$(find "${PACKAGE_DIR}" -type f -name "${pattern}" -print -quit)"
-          test -n "${package}" || {
-              echo "no ${pattern} found in ${PACKAGE_DIR}" >&2
-              exit 1
-          }
-          echo "package=${package}" >>"${GITHUB_OUTPUT}"
-
-      # Debian 11 went end-of-life on 2026-08-31
-      # (https://www.debian.org/News/2026/20260831) and its packages are
-      # already partly gone from deb.debian.org, so switch to the
-      # snapshot.debian.org entries the image ships commented out in its
-      # sources.list: they are pinned to the snapshot the image was built
-      # from, so they serve every version it needs and never go away.
-      # Snapshots keep their original, long-passed Valid-Until, hence the
-      # disabled check; the retries absorb snapshot.debian.org's throttling.
-      - name: Switch Debian 11 to snapshot.debian.org
-        if: ${{ matrix.image == 'debian:11' }}
-        run: |
-          sed -i 's|^deb |# deb |; s|^# deb http://snapshot|deb http://snapshot|' /etc/apt/sources.list
-          printf '%s\n' \
-              'Acquire::Check-Valid-Until "false";' \
-              'Acquire::Retries "3";' \
-              >/etc/apt/apt.conf.d/99snapshot
-
-      - name: Install the DEB
-        if: ${{ inputs.package_type == 'deb' }}
-        env:
-          DEBIAN_FRONTEND: noninteractive
-          PACKAGE: ${{ steps.find.outputs.package }}
-        run: |
-          # Stock Debian and Ubuntu images carry no package lists, so apt has
-          # nothing to resolve the systemd dependency from until it fetches them.
-          apt-get update -qq
-          apt-get install -y "./${PACKAGE}"
-
-      - name: Install the RPM
-        if: ${{ inputs.package_type == 'rpm' }}
-        env:
-          PACKAGE: ${{ steps.find.outputs.package }}
-        run: dnf install -y "./${PACKAGE}"
-
-      - name: Run xrpld
-        run: xrpld --version
-
-      - name: Run validator-keys
-        run: validator-keys --version
-
-      - name: Run rippled, the legacy compatibility symlink
-        run: rippled --version
-
-      - name: Check the service account
-        run: id xrpld
-
-      - name: Check the state directory
-        run: test -d /var/lib/xrpld
-
-      - name: Check the log directory
-        run: test -d /var/log/xrpld

.github/workflows/reusable-package.yml

@@ -1,57 +1,17 @@
-# Build, verify and publish Linux packages from the pre-built xrpld and
-# validator-keys artifacts, in these stages:
-#
-#   - 'package' builds and signs one format per config that carries a "package"
-#     map in linux.json; that map names the container image and the format
-#   - 'test-install-deb' and 'test-install-rpm' call
-#     reusable-package-test-install.yml to install what was built on a range of
-#     distros and run the binaries there, so a package that cannot be installed
-#     never reaches Nexus
-#   - 'publish' uploads with the image's publish_pkg.py, doing a --dry-run
-#     unless 'publish: true'
-#   - 'docker' builds an Ubuntu image from the tested DEB, and one with the
-#     voidstar binary for Antithesis, pushing them to Docker Hub and to the
-#     Antithesis registry only with 'publish: true'
-#
-# Only linux/amd64 is supported; the runner is hardcoded in the jobs below.
+# Build Linux packages (DEB and RPM) from pre-built binary artifacts (xrpld and
+# validator-keys). Discovers which configurations to package from linux.json
+# (configs in "package_configs") and fans out one job per distro. Only
+# linux/amd64 is supported; the runner is hardcoded in the job below.
 name: Package
 
 on:
   workflow_call:
     inputs:
-      publish:
-        description: "Whether to publish the packages after building them."
-        required: false
-        type: boolean
-        default: false
-      nexus_url:
-        description: "The base URL of the Nexus instance hosting the deb and rpm repositories."
+      pkg_release:
+        description: "Package release number. Increment when repackaging the same executable."
         required: false
         type: string
-        default: https://packages-upload.xrplf.org
-
-    secrets:
-      remote_username:
-        description: "The username of a Nexus account with write access to the repositories."
-        required: false
-      remote_password:
-        description: "The password or token for that Nexus account."
-        required: false
-      signing_key:
-        description: "Armoured PGP private key used to sign the RPMs."
-        required: false
-      dockerhub_token:
-        description: "A Docker Hub organization access token for xrplf, with push access to xrplf/xrpld."
-        required: false
-      antithesis_docker_host:
-        description: "The host of the Antithesis container registry, e.g. us-central1-docker.pkg.dev."
-        required: false
-      antithesis_docker_path:
-        description: "The repository path in that registry, the image name excluded."
-        required: false
-      antithesis_docker_credentials:
-        description: "The JSON key of a service account with push access to that repository."
-        required: false
+        default: "1"
 
 defaults:
   run:
@@ -59,15 +19,12 @@ defaults:
 
 env:
   BUILD_DIR: build
-  PACKAGE_DIR: packages
 
 jobs:
   generate-matrix:
     runs-on: ubuntu-latest
     outputs:
       matrix: ${{ steps.generate.outputs.matrix }}
-      deb_package_names: ${{ steps.generate.outputs.deb_package_names }}
-      rpm_package_names: ${{ steps.generate.outputs.rpm_package_names }}
     steps:
       - name: Checkout repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
@@ -84,7 +41,7 @@ jobs:
 
   package:
     needs: [generate-matrix]
-    if: ${{ github.event.repository.visibility == 'public' || startsWith(github.ref, 'refs/tags/') }}
+    if: ${{ github.event.repository.visibility == 'public' }}
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.generate-matrix.outputs.matrix) }}
@@ -93,17 +50,12 @@ jobs:
       contents: read
     runs-on: ["self-hosted", "Linux", "X64", "heavy"]
     container: ${{ matrix.image }}
-    timeout-minutes: 10
+    timeout-minutes: 30
 
     steps:
       - name: Checkout repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
-      - name: Prepare runner
-        uses: XRPLF/actions/prepare-runner@b3e255d74d785d053e4903da8ac90983cd7d9e82
-        with:
-          enable_ccache: false
-
       - name: Download pre-built xrpld binary
         uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
         with:
@@ -119,230 +71,17 @@ jobs:
       - name: Make binaries executable
         run: chmod +x "${BUILD_DIR}/xrpld" "${BUILD_DIR}/validator-keys"
 
-      - name: Determine release info
-        id: release_info
-        uses: ./.github/actions/release-info
-
       - name: Build package
         env:
-          PACKAGE_TYPE: ${{ matrix.package_type }}
-          PACKAGE_VARIANT: ${{ matrix.package_variant }}
-          PKG_RELEASE: ${{ steps.release_info.outputs.pkg_release }}
-          CHANNEL: ${{ steps.release_info.outputs.channel }}
-        run: |
-          ./package/build_pkg.py \
-              --package-type "${PACKAGE_TYPE}" \
-              --build-dir "${BUILD_DIR}" \
-              --pkg-release "${PKG_RELEASE}" \
-              --variant "${PACKAGE_VARIANT}" \
-              --channel "${CHANNEL}"
+          PKG_RELEASE: ${{ inputs.pkg_release }}
+        run: ./package/build_pkg.sh
 
-      # Before the upload, so the artifact, the tested package and the published
-      # package are the same bytes.
-      - name: Sign RPM
-        if: ${{ inputs.publish && matrix.package_type == 'rpm' }}
-        env:
-          PKG_SIGNING_KEY: ${{ secrets.signing_key }}
-        run: ./package/sign_rpm.py --package-dir "${BUILD_DIR}"
-
-      # Split from the debug symbols, which are an order of magnitude larger, so
-      # that test-install downloads only what it installs. In the globs below the
-      # version follows the name, separated by '_' in a DEB and '-' in an RPM. A
-      # version starts with a digit and a longer name does not, so that one digit
-      # is what tells 'xrpld-3.4.1-...' from 'xrpld-assert-3.4.1-...'.
       - name: Upload package artifact
         uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
         with:
           name: ${{ matrix.xrpld_artifact_name }}-pkg
           path: |
-            ${{ env.BUILD_DIR }}/debbuild/${{ matrix.package_name }}_[0-9]*.deb
-            ${{ env.BUILD_DIR }}/rpmbuild/RPMS/**/${{ matrix.package_name }}-[0-9]*.rpm
+            ${{ env.BUILD_DIR }}/debbuild/*.deb
+            ${{ env.BUILD_DIR }}/debbuild/*.ddeb
+            ${{ env.BUILD_DIR }}/rpmbuild/RPMS/**/*.rpm
           if-no-files-found: error
-
-      - name: Upload debug symbol artifact
-        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
-        with:
-          name: ${{ matrix.xrpld_artifact_name }}-pkg-debug
-          path: |
-            ${{ env.BUILD_DIR }}/debbuild/${{ matrix.package_name }}-dbgsym_[0-9]*.deb
-            ${{ env.BUILD_DIR }}/debbuild/${{ matrix.package_name }}-dbgsym_[0-9]*.ddeb
-            ${{ env.BUILD_DIR }}/rpmbuild/RPMS/**/${{ matrix.package_name }}-debuginfo-[0-9]*.rpm
-          if-no-files-found: error
-
-  # One call per format, so a variant packaged for one format is installed for
-  # that format alone. The images are every distro family that format targets,
-  # oldest release first, so both ends of the dependency range the packages
-  # declare are exercised.
-  test-install-deb:
-    needs: [generate-matrix, package]
-    name: install deb
-    uses: ./.github/workflows/reusable-package-test-install.yml
-    with:
-      package_type: deb
-      package_names: ${{ needs.generate-matrix.outputs.deb_package_names }}
-      images: |
-        [
-          "debian:11",
-          "debian:12",
-          "debian:13",
-          "ubuntu:20.04",
-          "ubuntu:22.04",
-          "ubuntu:24.04",
-          "ubuntu:26.04"
-        ]
-
-  test-install-rpm:
-    needs: [generate-matrix, package]
-    name: install rpm
-    uses: ./.github/workflows/reusable-package-test-install.yml
-    with:
-      package_type: rpm
-      package_names: ${{ needs.generate-matrix.outputs.rpm_package_names }}
-      images: |
-        [
-          "almalinux:9",
-          "almalinux:10",
-          "rockylinux/rockylinux:9",
-          "rockylinux/rockylinux:10",
-          "registry.access.redhat.com/ubi9/ubi",
-          "registry.access.redhat.com/ubi10/ubi"
-        ]
-
-  publish:
-    needs: [generate-matrix, package, test-install-deb, test-install-rpm]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.generate-matrix.outputs.matrix) }}
-    name: "publish ${{ matrix.xrpld_artifact_name }}${{ !inputs.publish && ' (dry run)' || '' }}"
-    permissions:
-      contents: read
-    runs-on: ["self-hosted", "Linux", "X64", "heavy"]
-    container: ${{ matrix.image }}
-    timeout-minutes: 30
-
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
-
-      - name: Prepare runner
-        uses: XRPLF/actions/prepare-runner@b3e255d74d785d053e4903da8ac90983cd7d9e82
-        with:
-          enable_ccache: false
-
-      # Both artifacts, so the debug symbols are published alongside the package.
-      - name: Download package artifacts
-        uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
-        with:
-          pattern: ${{ matrix.xrpld_artifact_name }}-pkg*
-          merge-multiple: true
-          path: ${{ env.PACKAGE_DIR }}
-
-      - name: Determine release info
-        id: release_info
-        uses: ./.github/actions/release-info
-
-      - name: Publish package
-        env:
-          CHANNEL: ${{ steps.release_info.outputs.channel }}
-          DRY_RUN_OPTION: ${{ !inputs.publish && '--dry-run' || '' }}
-          NEXUS_URL: ${{ inputs.nexus_url }}
-          NEXUS_USERNAME: ${{ inputs.publish && secrets.remote_username || '' }}
-          NEXUS_PASSWORD: ${{ inputs.publish && secrets.remote_password || '' }}
-        run: |
-          publish_pkg.py \
-              --channel "${CHANNEL}" \
-              --package-dir "${PACKAGE_DIR}" \
-              --nexus-url "${NEXUS_URL}" \
-              ${DRY_RUN_OPTION}
-
-  docker:
-    needs: [test-install-deb, test-install-rpm]
-    strategy:
-      fail-fast: false
-      matrix:
-        target: [xrpld, voidstar]
-    name: "docker ${{ matrix.target }}${{ !inputs.publish && ' (dry run)' || '' }}"
-    permissions:
-      contents: read
-    runs-on: ubuntu-latest
-    timeout-minutes: 15
-    env:
-      CONTEXT: image-context
-      IMAGE: ${{ matrix.target == 'voidstar' && 'xrpld-voidstar' || 'xrplf/xrpld' }}:${{ github.ref_type == 'tag' && github.ref_name || 'develop' }}
-
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
-
-      - name: Determine release info
-        id: release_info
-        uses: ./.github/actions/release-info
-
-      # Docker Hub is public, so it only gets builds whose packages are public:
-      # those of a public codebase, and stable releases.
-      # The Antithesis registry is private, so it gets every build.
-      - name: Decide whether to push
-        env:
-          PUSH: ${{ inputs.publish && (matrix.target == 'voidstar' || github.event.repository.visibility == 'public' || steps.release_info.outputs.channel == 'stable') }}
-        run: echo "PUSH=${PUSH}" | tee -a "${GITHUB_ENV}"
-
-      - name: Download package artifacts
-        uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
-        with:
-          pattern: "*-pkg"
-          merge-multiple: true
-          path: ${{ env.PACKAGE_DIR }}
-
-      - name: Download voidstar binary
-        if: ${{ matrix.target == 'voidstar' }}
-        uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
-        with:
-          name: xrpld-ubuntu-clang-debug-amd64-voidstar
-          path: ${{ env.CONTEXT }}
-
-      - name: Build image
-        env:
-          TARGET: ${{ matrix.target }}
-        run: |
-          mkdir -p "${CONTEXT}"
-          find "${PACKAGE_DIR}" -type f -name 'xrpld_[0-9]*.deb' -exec cp {} "${CONTEXT}/" \;
-          docker build --pull --file package/images/xrpld/Dockerfile --target "${TARGET}" --tag "${IMAGE}" "${CONTEXT}"
-
-      - name: Start the server
-        run: |
-          container="$(docker run --detach "${IMAGE}" --standalone --silent --conf /etc/xrpld/xrpld.cfg)"
-          trap 'docker rm --force "${container}" >/dev/null' EXIT
-
-          for _ in $(seq 30); do
-              output="$(docker exec "${container}" xrpld --conf /etc/xrpld/xrpld.cfg server_info || true)"
-              if [[ "${output}" == *'"status" : "success"'* ]]; then
-                  exit 0
-              fi
-              sleep 2
-          done
-
-          docker logs "${container}"
-          exit 1
-
-      - name: Log in to Docker Hub
-        if: ${{ env.PUSH == 'true' && matrix.target == 'xrpld' }}
-        uses: docker/login-action@dbcb813823bdd20940b903addbd779551569679f # v4.6.0
-        with:
-          username: xrplf
-          password: ${{ secrets.dockerhub_token }}
-
-      - name: Log in to the Antithesis registry
-        if: ${{ env.PUSH == 'true' && matrix.target == 'voidstar' }}
-        uses: docker/login-action@dbcb813823bdd20940b903addbd779551569679f # v4.6.0
-        with:
-          registry: ${{ secrets.antithesis_docker_host }}
-          username: _json_key
-          password: ${{ secrets.antithesis_docker_credentials }}
-
-      - name: Push image
-        if: ${{ env.PUSH == 'true' }}
-        env:
-          REGISTRY: ${{ matrix.target == 'voidstar' && format('{0}/{1}/', secrets.antithesis_docker_host, secrets.antithesis_docker_path) || '' }}
-        run: |
-          docker tag "${IMAGE}" "${REGISTRY}${IMAGE}"
-          docker push "${REGISTRY}${IMAGE}"

.github/workflows/reusable-rust.yml

@@ -1,84 +0,0 @@
-# Clippy, coverage and documentation for the Rust crates in crates/. Each runs
-# as an independent job on a GitHub-hosted runner, but inside the same container
-# image used to build the crates in the C++/Corrosion path, so the toolchain
-# (and therefore the lints and the cargo cache) matches what production builds
-# use. Coverage is the exception: it needs the nightly rustc that honours
-# #[coverage(off)], which the image carries alongside the pinned stable.
-#
-# Rust unit tests are deliberately NOT run here. They run as part of the C++
-# build (reusable-build-test-config.yml), which already compiles the crates on a
-# self-hosted runner, so there is no need to provision a toolchain again.
-name: Rust
-
-on:
-  workflow_call:
-    secrets:
-      CODECOV_TOKEN:
-        description: "The Codecov token to use for uploading coverage reports."
-        required: true
-
-defaults:
-  run:
-    shell: bash
-    working-directory: crates
-
-permissions:
-  contents: read
-
-jobs:
-  clippy:
-    runs-on: ubuntu-latest
-    container: ghcr.io/xrplf/xrpld/nix-ubuntu:sha-060957e
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
-
-      - name: Use cargo artifacts cache
-        uses: ./.github/actions/cargo-cache
-
-      - name: Run clippy
-        run: cargo clippy --workspace --all-targets --all-features --locked -- -D warnings
-
-  coverage:
-    runs-on: ubuntu-latest
-    container: ghcr.io/xrplf/xrpld/nix-ubuntu:sha-060957e
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
-
-      - name: Use the nightly Rust toolchain
-        run: rust-nightly path >>"${GITHUB_PATH}"
-
-      - name: Use cargo artifacts cache
-        uses: ./.github/actions/cargo-cache
-
-      - name: Generate coverage report
-        run: cargo llvm-cov nextest --workspace --all-features --locked --no-tests=warn --lcov --output-path lcov.info
-
-      - name: Upload coverage report
-        if: ${{ github.repository == 'XRPLF/rippled' }}
-        uses: codecov/codecov-action@303a32d7a59b442fa8d48b6a1cc6825c09c847a5 # v7.1.1
-        with:
-          disable_search: true
-          disable_telem: true
-          fail_ci_if_error: true
-          files: crates/lcov.info
-          flags: rust
-          plugins: noop
-          token: ${{ secrets.CODECOV_TOKEN }}
-          verbose: true
-
-  doc:
-    runs-on: ubuntu-latest
-    container: ghcr.io/xrplf/xrpld/nix-ubuntu:sha-060957e
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
-
-      - name: Use cargo artifacts cache
-        uses: ./.github/actions/cargo-cache
-
-      - name: Build documentation
-        env:
-          RUSTDOCFLAGS: "-D warnings"
-        run: cargo doc --workspace --no-deps --all-features --locked

.github/workflows/reusable-upload-recipe.yml

@@ -40,7 +40,7 @@ defaults:
 jobs:
   upload:
     runs-on: ubuntu-latest
-    container: ghcr.io/xrplf/xrpld/nix-ubuntu:sha-060957e
+    container: ghcr.io/xrplf/xrpld/nix-ubuntu:sha-fecfc0c
     env:
       REMOTE_NAME: ${{ inputs.remote_name }}
       CONAN_LOGIN_USERNAME_XRPLF: ${{ secrets.remote_username }}
@@ -49,14 +49,9 @@ jobs:
       - name: Checkout repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
-      - name: Prepare runner
-        uses: XRPLF/actions/prepare-runner@b3e255d74d785d053e4903da8ac90983cd7d9e82
-        with:
-          enable_ccache: false
-
-      - name: Determine release info
-        id: release_info
-        uses: ./.github/actions/release-info
+      - name: Generate build version number
+        id: version
+        uses: ./.github/actions/generate-version
 
       - name: Set up Conan
         uses: ./.github/actions/setup-conan
@@ -68,17 +63,33 @@ jobs:
         run: conan remote login "${REMOTE_NAME}" "${CONAN_LOGIN_USERNAME_XRPLF}" --password "${CONAN_PASSWORD_XRPLF}"
 
       - name: Upload Conan recipe (version)
-        env:
-          VERSION: ${{ steps.release_info.outputs.version }}
         run: |
-          conan export . --version="${VERSION}"
-          conan upload --confirm --check --remote="${REMOTE_NAME}" "xrpl/${VERSION}"
+          conan export . --version=${{ steps.version.outputs.version }}
+          conan upload --confirm --check --remote="${REMOTE_NAME}" xrpl/${{ steps.version.outputs.version }}
 
+      # When this workflow is triggered by a push event, it will always be when merging into the
+      # 'develop' branch, see on-trigger.yml.
       - name: Upload Conan recipe (develop)
-        if: ${{ github.ref == 'refs/heads/develop' }}
+        if: ${{ github.event_name == 'push' }}
         run: |
           conan export . --version=develop
           conan upload --confirm --check --remote="${REMOTE_NAME}" xrpl/develop
 
+      # When this workflow is triggered by a pull request event, it will always be when merging into
+      # one of the 'release' branches, see on-pr.yml.
+      - name: Upload Conan recipe (rc)
+        if: ${{ github.event_name == 'pull_request' }}
+        run: |
+          conan export . --version=rc
+          conan upload --confirm --check --remote="${REMOTE_NAME}" xrpl/rc
+
+      # When this workflow is triggered by a push event, it will always be when tagging a final
+      # release, see on-tag.yml.
+      - name: Upload Conan recipe (release)
+        if: ${{ startsWith(github.ref, 'refs/tags/') }}
+        run: |
+          conan export . --version=release
+          conan upload --confirm --check --remote="${REMOTE_NAME}" xrpl/release
+
     outputs:
-      ref: xrpl/${{ steps.release_info.outputs.version }}
+      ref: xrpl/${{ steps.version.outputs.version }}

.github/workflows/upload-conan-deps.yml

@@ -68,15 +68,10 @@ jobs:
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
       - name: Prepare runner
-        uses: XRPLF/actions/prepare-runner@b3e255d74d785d053e4903da8ac90983cd7d9e82
+        uses: XRPLF/actions/prepare-runner@c00c22ada3bd6bcda48fcb0d62fbbab49fec8a0f
         with:
           enable_ccache: false
 
-      # Before any step that uses a build tool, composite actions included.
-      - name: Setup Nix environment
-        if: ${{ matrix.toolchain == 'nix' }}
-        uses: ./.github/actions/setup-nix-env
-
       - name: Print build environment
         uses: XRPLF/actions/print-build-env@59dec886e4afb05a1724443af08baccbc045b574
 
@@ -92,9 +87,7 @@ jobs:
         with:
           compiler: ${{ matrix.compiler }}
 
-      # `setup-nix-env` already did this for the Nix toolchain.
       - name: Setup Conan
-        if: ${{ matrix.toolchain != 'nix' }}
         env:
           SANITIZERS: ${{ matrix.sanitizers }}
         uses: ./.github/actions/setup-conan
@@ -113,10 +106,6 @@ jobs:
           log_verbosity: ${{ runner.os == 'Windows' && 'quiet' || 'verbose' }}
           sanitizers: ${{ matrix.sanitizers }}
 
-      - name: Check the Conan cache for Nix store references (Nix toolchain)
-        if: ${{ matrix.toolchain == 'nix' }}
-        run: ./bin/check-nix-store-refs.sh "${CONAN_HOME}"
-
       - name: Log into Conan remote
         if: ${{ github.repository == 'XRPLF/rippled' && (github.event_name == 'push' || github.event_name == 'workflow_dispatch') }}
         run: conan remote login "${CONAN_REMOTE_NAME}" "${{ secrets.NEXUS_REMOTE_USERNAME }}" --password "${{ secrets.NEXUS_REMOTE_PASSWORD }}"

.gitignore

@@ -72,16 +72,11 @@ DerivedData
 /.zed/
 
 # AI tools.
-# Shared/committable AI agent config (AGENTS.md, CLAUDE.md, GEMINI.md, .claude/settings.json,
-# tool-specific rules files, etc.) should be checked in — see CONTRIBUTING.md. Only the
-# personal/local variants below are ignored.
 /.agent
 /.agents
 /.augment
-/.claude/settings.local.json
-AGENTS.override.md
-CLAUDE.local.md
-GEMINI.local.md
+/.claude
+/CLAUDE.md
 
 # Python
 __pycache__
@@ -92,11 +87,5 @@ target/
 # Direnv's directory
 /.direnv
 
-# Direnv's local, per-developer overrides
-/.envrc.local
-
 # clangd cache
 /.cache
-
-# Rust build directory
-crates/target

.pre-commit-config.yaml

@@ -53,68 +53,33 @@ repos:
         entry: ./bin/pre-commit/check_doxygen_style.py
         language: python
         types_or: [c++, c]
-      - id: fix-gtest-names
-        name: "fix gtest names: CamelCase suite, snake_case test case"
-        entry: ./bin/pre-commit/fix_gtest_names.py
-        language: python
-        types_or: [c++, c]
 
   - repo: https://github.com/pre-commit/mirrors-clang-format
-    rev: e2b496dc2bd8340c2524cb9a2d2a943cde1bb6df # frozen: v23.1.1
+    rev: f4d7745e17a28aad7eed2f4874ca8d1568c11c4c # frozen: v22.1.8
     hooks:
       - id: clang-format
         args: [--style=file]
         types_or: [c++, c, proto]
         exclude: ^include/xrpl/protocol_autogen/(transactions|ledger_entries)/
 
-  - repo: local
-    hooks:
-      - id: cargo-fmt
-        name: cargo fmt
-        entry: cargo fmt --manifest-path crates/Cargo.toml --all
-        language: system
-        types: [rust]
-        pass_filenames: false # rustfmt formats the whole workspace
-      - id: check-coverage-attrs
-        name: check Rust coverage attributes
-        entry: ./bin/pre-commit/check_rust_coverage_attrs.py
-        language: python
-        files: ^crates/.*\.rs$
-
   - repo: https://github.com/BlankSpruce/gersemi-pre-commit
-    rev: f1c4833f8cf23c6d952673abc73525411a5719e8 # frozen: 0.29.1
+    rev: e98930bdc210d3387007f9252d8c1694ea7e410f # frozen: 0.27.7
     hooks:
       - id: gersemi
 
   - repo: https://github.com/rbubley/mirrors-prettier
-    rev: ef4a397f916211b4a39ccf9d3d9cbb6562157251 # frozen: v3.9.9
+    rev: 9337a74165b178ae2c766f60bee7252a0f06f3e8 # frozen: v3.9.5
     hooks:
       - id: prettier
         args: [--end-of-line=auto]
 
-  # Scoped to package/: the rest of the repo's Python has pre-existing findings,
-  # so widening these is its own change.
-  - repo: https://github.com/astral-sh/ruff-pre-commit
-    rev: a56c0b927e6465d37cae3e97d35d4d18ab2b96cd # frozen: v0.16.9
-    hooks:
-      - id: ruff-check
-        args: [--fix]
-        files: ^package/.*\.py$
-
   - repo: https://github.com/psf/black-pre-commit-mirror
     rev: 4160603246a6b365d4a2af661c6d71b0a0f50478 # frozen: 26.5.1
     hooks:
       - id: black
 
-  - repo: https://github.com/pre-commit/mirrors-mypy
-    rev: 7ff8d35ae36a7d2b968f2f90b4c723e292e594ee # frozen: v2.3.1
-    hooks:
-      - id: mypy
-        args: [--strict]
-        files: ^package/.*\.py$
-
   - repo: https://github.com/scop/pre-commit-shfmt
-    rev: 479be5958357ba5ab65ce47172117348516860e9 # frozen: v3.14.1-1
+    rev: 05c1426671b9237fb5e1444dd63aa5731bec0dfb # frozen: v3.13.1-1
     hooks:
       - id: shfmt
         args: [--write, --indent=4, --case-indent=true]
@@ -133,7 +98,7 @@ repos:
         files: \.md$
 
   - repo: https://github.com/streetsidesoftware/cspell-cli
-    rev: f5c5d72342f35643988a9ffa0705c05bd3ff8383 # frozen: v10.3.0
+    rev: ea11f9efc0bec520073405bc30552da887ba71bc # frozen: v10.0.1
     hooks:
       - id: cspell
         name: check changed files spelling

AGENTS.md

@@ -1,42 +0,0 @@
-# AGENTS.md
-
-This file provides guidance to AI coding agents (Claude Code, and other AGENTS.md-compatible tools) when working with code in this repository.
-
-## Build
-
-Required on Linux/macOS: use the Nix devshell, which sets up the compiler, Conan, ccache, and (optionally) Rust automatically.
-
-```bash
-nix develop
-```
-
-For alternate devshell variants (specific compiler, no-compiler, coverage), see [docs/build/nix.md](./docs/build/nix.md). For the manual build steps, CMake options, and protocol codegen commands, see [BUILD.md](./BUILD.md) (`## Steps`, `## Options`, `## Code generation`).
-
-Rust crate tests (independent of the CMake build): `cargo test --manifest-path crates/Cargo.toml --workspace` (CI uses `cargo nextest`).
-
-## Testing
-
-Unit tests are a custom framework built into the `xrpld` binary itself (not Boost.Test/GTest/Catch); see [CONTRIBUTING.md](./CONTRIBUTING.md#unit-tests) for the basic invocation. Notes not covered there:
-
-- A suite's `--unittest` name is built from the arguments to its `BEAST_DEFINE_TESTSUITE`/`BEAST_DEFINE_TESTSUITE_PRIO` macro (usually at the bottom of the test file), in reverse order and joined with `.`: `BEAST_DEFINE_TESTSUITE(Credentials, app, xrpl)` → `xrpl.app.Credentials`.
-- `--unittest-arg` does nothing — don't use it.
-- Tests that run offline in under a minute should be automatic `--unittest` suites; anything else is a manual/integration test.
-- New tests should be written using `gtest` under `src/tests/` unless that isn't possible, in which case fall back to the legacy Beast framework under `src/test/`. `tests/` (top-level) holds integration tests exercised against `libxrpl`/`xrpld`.
-
-## Lint/Format
-
-See [CONTRIBUTING.md](./CONTRIBUTING.md#pre-commit-hooks) for `pre-commit` setup and [CONTRIBUTING.md](./CONTRIBUTING.md#clang-tidy) for `clang-tidy` (opt-in, needs local `clang-tidy` and generated headers).
-
-## Code Style
-
-New file placement and header levelization: see [CONTRIBUTING.md](./CONTRIBUTING.md#before-making-a-pull-request). Braces, whitespace, member order, and other conventions: see [docs/CodingStyle.md](./docs/CodingStyle.md). `XRPL_ASSERT`/`UNREACHABLE` contracts: see [CONTRIBUTING.md](./CONTRIBUTING.md#contracts-and-instrumentation). Commit messages: see [CONTRIBUTING.md](./CONTRIBUTING.md#good-commit-messages).
-
-## Architecture
-
-Paths below reflect the current layout; update this section if modularization moves a subsystem to a different directory.
-
-- `include/xrpl/` + `src/libxrpl/` — the core protocol library: ledger, shamap, consensus, crypto, json, resource, nodestore, rdb, peerfinder, and `tx/` (transaction application: `Transactor.cpp`, `applySteps.cpp`, invariants, payment paths). `tx/transactors/` has one file per transaction type, grouped by subsystem: `escrow/`, `vault/`, `lending/`, `sponsor/`, `nft/`, `token/` (MPT), `payment_channel/`, `permissioned_domain/`, `dex/`, `oracle/`, `did/`, `credentials/`, `bridge/`, `check/`, `delegate/`, `account/`, `system/`. Any change to transaction-processing behavior must be gated behind an Amendment.
-- `src/xrpld/` — the server application built on top of `libxrpl`: `app`, `core`, `overlay` (P2P networking), `peerfinder`, `perflog`, `rpc`, `shamap`. `main` builds an `ApplicationImp` implementing `Application`; most components hold a reference to it (`app_`), giving broad cross-component access — expect to trace call chains through `Application&`.
-- `src/test/` — unit tests mirroring the subsystems above, plus `jtx/` (the transaction-building test DSL — e.g. `jtx/escrow.h`, `jtx/vault.h`, `jtx/sponsor.h`, `jtx/permissioned_dex.h`) and `unit_test/` (the custom test framework itself, derived from Beast).
-- `src/tests/` — unit tests for `libxrpl` written in `gtest`, gradually replacing the `src/test` equivalents.
-- `crates/` — a Rust workspace (only built with `-Dxrpld -Drust=ON`) bridged into C++ via `cxxbridge`/the `cxx` crate; currently just a `hello_world` interop scaffold. Requires the Rust toolchain pinned in `rust-toolchain.toml` (the Nix devshell provides it automatically).

API-CHANGELOG.md

@@ -22,61 +22,17 @@ API version 2 is available in `xrpld` version 2.0.0 and later. See [API-VERSION-
 
 This version is supported by all `xrpld` versions. For WebSocket and HTTP JSON-RPC requests, it is currently the default API version used when no `api_version` is specified.
 
-## XRP Ledger server version 3.5.0
+## Unreleased
 
-Version 3.5.0 is not yet released.
+This section contains changes targeting a future version.
 
-### Additions in 3.5.0
+### Additions
 
-- `subscribe`, `unsubscribe`: Added an optional `mpt_issuances` request field, an array of MPT issuance IDs (hex strings). Subscribers receive a message with `type` `mptTransaction` for each validated transaction whose metadata affects a subscribed issuance; the message has the same fields as the `transactions` stream. MPT issuance subscriptions count toward the per-connection subscription limit. An empty array, a non-array value, or an invalid ID returns `invalidParams`. ([#5671](https://github.com/XRPLF/rippled/pull/5671))
-
-### Bugfixes in 3.5.0
-
-- `channel_authorize`: The `channel_id` field now returns an `invalidParams` error if the value is not a string. [#7582](https://github.com/XRPLF/rippled/pull/7582)
-- `channel_verify`: The `channel_id` and `signature` fields now return an `invalidParams` error if the value is not a string. [#7582](https://github.com/XRPLF/rippled/pull/7582)
-
-## XRP Ledger server version 3.4.0
-
-Version 3.4.0 is not yet released. These changes are available in the 3.4.0 beta releases.
-
-### Additions in 3.4.0
-
-- `ledger`: `nftoken_id`, `nftoken_ids`, and `offer_id` are now included in transaction metadata when transactions are expanded (`expand`, or admin-only `full`), matching the `tx`, `account_tx`, and `subscribe` (`transactions` stream) responses. ([#5706](https://github.com/XRPLF/rippled/pull/5706))
-
-### Bugfixes in 3.4.0
-
-- `sign`, `sign_for`, `submit`: `signature_target` now returns `invalidParams` unless it names `CounterpartySignature` or `SponsorSignature`. It previously accepted any inner object field, such as `Book` or `NFToken`, and signed into it.
-- `sign`, `sign_for`, `submit`, `submit_multisigned`: With `fixCleanup3_4_0` enabled, a signature in `CounterpartySignature` or `SponsorSignature` covers a different prefix than the transaction's own signature, so a signature can no longer be moved from one of those roles into another. Clients that build these signatures themselves must use the new prefixes: `CPT` and `CPM` (single- and multi-signing) for `CounterpartySignature`, and `SPN` and `SPM` for `SponsorSignature`.
-- `get_aggregate_price`: Duplicate entries in the `oracles` request array are now ignored. [#6586](https://github.com/XRPLF/rippled/pull/6586)
-- `vault_info`: Errors now identify what the request got wrong instead of reporting every failure as the unregistered token `malformedRequest`, and the `error`, `error_code` and `error_message` fields now agree with each other. An invalid `vault_id` or `seq` returns `invalidParams`, an invalid `owner` returns `actMalformed`, and a request that mixes `vault_id` with `owner`/`seq` or supplies neither returns `invalidParams` with a message naming the accepted combinations. [#8015](https://github.com/XRPLF/rippled/pull/8015)
-- `vault_info`: A well-formed all-zero `vault_id` now returns `entryNotFound` instead of being rejected as malformed, and `entryNotFound` responses now include `error_code` and `error_message`. Clients that request `ripplerpc` 3.0 or above therefore receive HTTP 400 with that error rather than HTTP 200. [#8015](https://github.com/XRPLF/rippled/pull/8015)
-- `vault_info`: `vault_id` and `owner` must now be strings, matching how `ledger_entry` reads the same fields. An object or an array in either field previously produced an internal error, and a number was silently converted to its decimal text; `vault_id` now returns `invalidParams` and `owner` returns `actMalformed`. [#8015](https://github.com/XRPLF/rippled/pull/8015)
-- `gateway_balances`: The `account` and `ident` fields now return an `invalidParams` error if the value is not a string, instead of an `internal` error. [#7655](https://github.com/XRPLF/rippled/pull/7655)
-- `account_lines`: The `peer` field now returns an error if the value is not a string. [#7728](https://github.com/XRPLF/rippled/pull/7728)
-- `ledger`: `delivered_amount` is now included in the metadata of successful `AccountDelete` transactions when transactions are expanded (`expand`, or admin-only `full`). Previously it was only added for `Payment` and `CheckCash`, which made `ledger` inconsistent with `tx` and `account_tx`. [#5706](https://github.com/XRPLF/rippled/pull/5706)
-- `noripple_check`: The `transactions` field is no longer included in error responses; it is still returned (possibly as an empty array) whenever `transactions` is `true` and the request succeeds. A malformed `account` is now rejected before the ledger is looked up, so that error response no longer carries the `ledger_hash`, `ledger_index`, and `validated` fields ([#6303](https://github.com/XRPLF/rippled/pull/6303)).
-
-## XRP Ledger server version 3.3.0
-
-[Version 3.3.0](https://github.com/XRPLF/rippled/releases/tag/3.3.0) was released on Aug 6, 2026.
-
-### Additions in 3.3.0
-
-- `account_tx`: Added an optional `delegate` request object to filter delegated transactions. The object requires `delegate_filter`, which must be either `actor` for transactions owned by the requested account but signed by another account, or `authorizer` for transactions signed by the requested account on behalf of another account. The optional `counter_party` account narrows the results to a specific signer/delegate for `actor` or a specific owner/delegator for `authorizer`. Malformed `delegate`, `delegate_filter`, and `counter_party` values return standard invalid field errors, and invalid account IDs return `actMalformed`. When paginating delegate-filtered queries, a marker from a delegate-filtered query includes a `delegate` flag and is only valid for follow-up requests that also supply `delegate` (mixing marker conventions returns `invalidParams`). Because filtering is applied after the ledger scan, a page may contain fewer results than `limit` (possibly zero) while still returning a marker, so callers must continue until no marker is present. ([#6126](https://github.com/XRPLF/rippled/pull/6126))
-
-## XRP Ledger server version 3.2.1
-
-[Version 3.2.1](https://github.com/XRPLF/rippled/releases/tag/3.2.1) was released on Aug 1, 2026.
-
-This release contains bug fixes only and no API changes.
-
-## XRP Ledger server version 3.2.0
-
-[Version 3.2.0](https://github.com/XRPLF/rippled/releases/tag/3.2.0) was released on Jun 16, 2026.
-
-### Additions in 3.2.0
+- `account_tx`: Added an optional `delegate` request object to filter delegated transactions. The object requires `delegate_filter`, which must be either `actor` for transactions owned by the requested account but signed by another account, or `authorizer` for transactions signed by the requested account on behalf of another account. The optional `counter_party` account narrows the results to a specific signer/delegate for `actor` or a specific owner/delegator for `authorizer`. Malformed `delegate`, `delegate_filter`, and `counter_party` values return standard invalid field errors, and invalid account IDs return `actMalformed`.
+  When paginating delegate-filtered queries, a marker from a delegate-filtered query includes a `delegate` flag and is only valid for follow-up requests that also supply `delegate` (mixing marker conventions returns `invalidParams`). Because filtering is applied after the ledger scan, a page may contain fewer results than `limit` (possibly zero) while still returning a marker, so callers must continue until no marker is present.
 
 - `ledger_entry`, `account_objects`: The `Delegate` ledger entry now includes an optional `DestinationNode` field, which stores the index into the authorized account's owner directory. This field is present on entries created after bidirectional directory tracking was introduced and may appear in RPC responses for those entries. ([#6681](https://github.com/XRPLF/rippled/pull/6681))
+
 - `server_definitions`: Added the following new sections to the response ([#6321](https://github.com/XRPLF/rippled/pull/6321)):
   - `TRANSACTION_FORMATS`: Describes the fields and their optionality for each transaction type, including common fields shared across all transactions.
   - `LEDGER_ENTRY_FORMATS`: Describes the fields and their optionality for each ledger entry type, including common fields shared across all ledger entries.
@@ -84,8 +40,9 @@ This release contains bug fixes only and no API changes.
   - `LEDGER_ENTRY_FLAGS`: Maps ledger entry type names to their flags and flag values.
   - `ACCOUNT_SET_FLAGS`: Maps AccountSet flag names (asf flags) to their numeric values.
 
-### Bugfixes in 3.2.0
+### Bugfixes
 
+- `get_aggregate_price`: Duplicate entries in the `oracles` request array are now ignored. [#6586](https://github.com/XRPLF/rippled/pull/6586)
 - Peer Crawler: The `port` field in `overlay.active[]` now consistently returns an integer instead of a string for outbound peers. [#6318](https://github.com/XRPLF/rippled/pull/6318)
 - `ping`: The `ip` field is no longer returned as an empty string for proxied connections without a forwarded-for header. It is now omitted, consistent with the behavior for identified connections. [#6730](https://github.com/XRPLF/rippled/pull/6730)
 - gRPC `GetLedgerDiff`: Fixed error message that incorrectly said "base ledger not validated" when the desired ledger was not validated. [#6730](https://github.com/XRPLF/rippled/pull/6730)
@@ -97,24 +54,8 @@ This release contains bug fixes only and no API changes.
 - `submit`: The `fail_hard` field now returns an error if the value is not a boolean. [#6529](https://github.com/XRPLF/rippled/pull/6529)
 - `subscribe`: The `taker` field in the `books` array now returns `actMalformed` instead of `badIssuer` if the value is not a valid account. [#6529](https://github.com/XRPLF/rippled/pull/6529)
 - Fixed a bug in `Forwarded` HTTP header parsing where the extracted IP address could be incorrect when no comma or semicolon delimiter follows the address. This could cause the server to misidentify a client's IP address when operating behind a reverse proxy. [#6529](https://github.com/XRPLF/rippled/pull/6529)
-
-## XRP Ledger server version 3.1.3
-
-[Version 3.1.3](https://github.com/XRPLF/rippled/releases/tag/3.1.3) was released on May 8, 2026.
-
-This release contains bug fixes only and no API changes.
-
-## XRP Ledger server version 3.1.2
-
-[Version 3.1.2](https://github.com/XRPLF/rippled/releases/tag/3.1.2) was released on Mar 12, 2026.
-
-This release contains bug fixes only and no API changes.
-
-## XRP Ledger server version 3.1.1
-
-[Version 3.1.1](https://github.com/XRPLF/rippled/releases/tag/3.1.1) was released on Feb 23, 2026.
-
-This release contains bug fixes only and no API changes.
+- `gateway_balances`: The `account` and `ident` fields now return an `invalidParams` error if the value is not a string, instead of an `internal` error. [#7655](https://github.com/XRPLF/rippled/pull/7655)
+- `account_lines`: The `peer` field now returns an error if the value is not a string. [#7728](https://github.com/XRPLF/rippled/pull/7728)
 
 ## XRP Ledger server version 3.1.0
 

BUILD.md

@@ -41,19 +41,15 @@ branch.
 git checkout develop
 ```
 
-For a release or release candidate, check out its [tag](https://github.com/XRPLF/rippled/releases), e.g.:
+For a release candidate, choose the relevant release branch, e.g.
+`release/3.2.x`.
 
 ```bash
-git checkout 3.4.0
+git checkout release/3.2.x
 ```
 
-See [RELEASING.md](./RELEASING.md) for how branches and releases are organized.
-
-A build reports `0.0.0-dev` with its short commit hash as build metadata, e.g.
-`0.0.0-dev+0123abc`. Only builds of a release, from a tag in CI or a versioned
-Conan reference, report a release version. To use another version, set the
-`FORCE_XRPLD_VERSION` environment variable when running CMake, e.g.
-`FORCE_XRPLD_VERSION=3.4.0`.
+For a stable release, choose one of the [tagged
+releases](https://github.com/XRPLF/rippled/releases).
 
 ### Set Up Conan
 
@@ -308,7 +304,6 @@ See [Sanitizers docs](./docs/build/sanitizers.md) for more details.
 | ---------------- | ------------- | ----------------------------------------------------------------------------- |
 | `assert`         | OFF           | Force enabling assertions.                                                    |
 | `coverage`       | OFF           | Prepare the coverage report.                                                  |
-| `rust`           | OFF           | Build the Rust crates and the C++ code that depends on them.                  |
 | `tests`          | OFF           | Build tests.                                                                  |
 | `unity`          | OFF           | Configure a unity build.                                                      |
 | `verify_headers` | ON            | Make the `verify-headers` target available to compile each header on its own. |
@@ -321,30 +316,6 @@ memory) since they concatenate sources into fewer translation units. Non-unity
 builds may be faster for incremental builds, and can be helpful for detecting
 `#include` omissions.
 
-### Rust crates
-
-The Rust crates in `crates/` are only part of the build when `rust` is ON. With
-`-Drust=OFF` (the default) the `crates` directory is not added to the build, no
-cxxbridge bindings are generated, and the C++ tests that exercise the Rust
-interop are not compiled — so no Rust toolchain is needed. CI builds always pass
-`-Drust=ON`.
-
-With `-Drust=ON` you need one extra dependency: a Rust toolchain (`cargo`,
-`rustc`) matching the channel pinned in
-[`rust-toolchain.toml`](./rust-toolchain.toml), which compiles the crates and
-generates the cxxbridge bindings. It is provided by the
-[Nix development shell](./docs/build/nix.md), so `-Drust=ON` works there without
-any extra setup; otherwise install it as described in
-[Rust](./docs/build/environment.md#rust).
-
-The crates also have their own Rust unit tests. Those are run with `cargo` and
-need only the Rust toolchain, independently of CMake and of the `rust` option
-(CI runs them with `cargo nextest`):
-
-```bash
-cargo test --manifest-path crates/Cargo.toml --workspace
-```
-
 ### Verifying headers
 
 The regular build only compiles `.cpp` files, so a header is only ever checked

CLAUDE.md

@@ -1 +0,0 @@
-AGENTS.md

CMakeLists.txt

@@ -77,6 +77,7 @@ endif()
 include(PatchNixBinary)
 
 include(XrplSanity)
+include(XrplVersion)
 include(XrplSettings)
 # this check has to remain in the top-level cmake because of the early return statement
 if(packages_only)
@@ -114,7 +115,6 @@ find_package(secp256k1 REQUIRED)
 find_package(SOCI REQUIRED)
 find_package(SQLite3 REQUIRED)
 find_package(xxHash REQUIRED)
-find_package(xrpl-rpc-spec REQUIRED)
 
 target_link_libraries(
     xrpl_libs
@@ -158,13 +158,7 @@ if(coverage)
     include(XrplCov)
 endif()
 
-add_custom_target(tidy_prerequisites)
-
-if(rust)
-    add_subdirectory(crates)
-endif()
 include(XrplCore)
-
 include(XrplProtocolAutogen)
 include(XrplInstall)
 include(XrplValidatorKeys)
@@ -175,7 +169,6 @@ include(XrplPackaging)
 if(tests)
     include(CTest)
     add_subdirectory(src/tests/libxrpl)
-    add_subdirectory(src/tests/xrpld)
 endif()
 
 if(benchmark)

CONTRIBUTING.md

@@ -14,13 +14,9 @@ The following branches exist in the main project repository:
 
 - `develop`: The latest set of unreleased features, and the most common
   starting point for contributions.
-- `staging/*` (e.g. `staging/3.4.x`): Staging branches, one per release line,
-  where fixes for that line are developed.
-- `release/*` (e.g. `release/3.4.x`): Release branches, one per release line,
-  holding the latest public release candidate or release for that line.
-  Releases are published as [tagged releases](https://github.com/XRPLF/rippled/releases).
-
-See [RELEASING.md](./RELEASING.md) for how these branches are used.
+- `release/*` (e.g. `release/3.2.x`): Release branches, one per release line,
+  holding the latest release candidate, or stable release for that line.
+  Stable releases are published as [tagged releases](https://github.com/XRPLF/rippled/releases).
 
 The tip of each branch must be signed. In order for GitHub to sign a
 squashed commit that it builds from your pull request, GitHub must know
@@ -63,17 +59,6 @@ to an existing XLS. Neither change will be released (in an amendment's
 case, marked as `Supported::yes`) until the corresponding XLS's status
 is `Final`.
 
-## AI coding agents
-
-[`AGENTS.md`](./AGENTS.md) (and its `CLAUDE.md` symlink, for Claude Code) holds shared, checked-in guidance for AI coding agents working in this repository — build/test/lint commands and architecture notes. Additional `AGENTS.md` files may exist in subdirectories to give agents context specific to that part of the codebase; whenever you add one, also add a `CLAUDE.md` symlink pointing to it (`ln -s AGENTS.md CLAUDE.md`) so Claude Code picks it up too.
-
-If you want to give an agent personal instructions that shouldn't be shared with other contributors (e.g. your own workflow preferences), those are gitignored, not checked in:
-
-- `CLAUDE.local.md` — read by Claude Code alongside `CLAUDE.md`.
-- `AGENTS.override.md` — read by AGENTS.md-compatible tools that support a personal override file layered on top of `AGENTS.md`.
-
-Likewise, `.claude/settings.local.json` is for personal, untracked Claude Code settings, while `.claude/settings.json` is shared.
-
 ## Before making a pull request
 
 (Or marking a draft pull request as ready.)
@@ -97,7 +82,7 @@ If you create new source files, they must be organized as follows:
   under `include/xrpl`, and source (`.cpp`) files must go under
   `src/libxrpl`.
 - All other non-test files must go under `src/xrpld`.
-- New test source files should use `gtest` and go under `src/tests`, unless that isn't possible, in which case they should use our legacy test framework and go under `src/test`.
+- All test source files must go under `src/test`.
 - All benchmark source files must go under `src/benchmarks`.
 
 The source must be formatted according to the style guide below. The easiest
@@ -149,8 +134,8 @@ tl;dr
 
 In general, pull requests use `develop` as the base branch.
 
-The exceptions are fixes for an existing release line,
-which use that line's staging branch (e.g. `staging/3.4.x`) as the base.
+The exceptions are fixes, improvements, and hotfixes for an existing release,
+which use that release's branch (e.g. `release/3.2.x`) as the base.
 
 If your changes are not quite ready, but you want to make it easily available
 for preliminary examination or review, you can create a "Draft" pull request.
@@ -240,9 +225,8 @@ environment, so you don't need to install most of the individual tools
 yourself. The version of each hook sourced from an external repository
 (`clang-format`, `gersemi`, etc.) is pinned in that file, so running the hooks
 locally uses exactly the same versions as CI. A few `local` hooks — most notably
-`clang-tidy` and `cargo fmt` — run tools from your own environment; see
-[Installing clang-tidy](#installing-clang-tidy) and
-[Rust](./docs/build/environment.md#rust) for how to get those.
+`clang-tidy` — run tools from your own environment; see
+[Installing clang-tidy](#installing-clang-tidy) for how to get those.
 
 To get started, install `pre-commit` and enable the git hook scripts:
 
@@ -271,7 +255,6 @@ The hooks configured in this repository include, among others:
 - `clang-tidy` — C++ static analysis (see [Clang-tidy](#clang-tidy)); opt in with `TIDY=1`
 - `fix-include-style`, `fix-pragma-once`, `check-doxygen-style` — C++ hygiene
 - `gersemi` — CMake formatting
-- `cargo fmt` — Rust formatting for the crates in `crates/`
 - `prettier`, `black`, `shfmt` — formatting for JavaScript/JSON/Markdown, Python, and shell
 - `cspell` — spell checking
 
@@ -336,11 +319,7 @@ See the [environment setup guide](./docs/build/environment.md#clang-tidy) for ho
 
 ### Running clang-tidy locally
 
-Before running clang-tidy, you must generate the files it depends on (protobuf headers, and, when the project is configured with `-Drust=ON`, the cxxbridge headers from the Rust crates). Configure the project as described in [`BUILD.md`](./BUILD.md), then build the `tidy_prerequisites` target, which generates all of them:
-
-```bash
-cmake --build build --target tidy_prerequisites
-```
+Before running clang-tidy, you must build the project to generate required files (particularly protobuf headers). Refer to [`BUILD.md`](./BUILD.md) for build instructions.
 
 #### Via pre-commit (recommended)
 
@@ -483,12 +462,8 @@ exists, then no other unit test will be executed, apart from `TestSuiteName`.
     elsewhere in the codebase.
 12. Use clear and self-explanatory names for functions, variables,
     structs and classes.
-13. Use TitleCase for classes, structs, type aliases and filenames,
-    camelCase for function and variable names, lower case for namespaces and
-    folders. The exception is a type alias that generic code looks up by name
-    (`value_type`, `iterator`, `result_type`, and the rest of the standard
-    container, hash and clock members), which keeps its snake_case spelling;
-    `.clang-tidy` lists the names that are allowed.
+13. Use TitleCase for classes, structs and filenames, camelCase for
+    function and variable names, lower case for namespaces and folders.
 14. Provide as many comments as you feel that a competent programmer
     would need to understand what your code does.
 
@@ -595,16 +570,15 @@ the suggested commit message, or modify it as needed.
 
 #### Slightly more complicated pull requests
 
-Some pull requests need to be pushed to their base branch (usually `develop`)
-as more than one commit.
-A PR author may _request_ to merge as separate commits. They
+Some pull requests need to be pushed to `develop` as more than one
+commit. A PR author may _request_ to merge as separate commits. They
 must _justify_ why separate commits are needed, and _specify_ how they
 would like the commits to be merged. If you disagree with the author,
 discuss it with them directly.
 
 If the process is reasonable, follow it. The simplest option is to do a
-fast forward only merge (`--ff-only`) on the command line
-and push to the base branch.
+fast forward only merge (`--ff-only`) on the command line and push to
+`develop`.
 
 Some examples of when separate commits are worthwhile are:
 
@@ -617,10 +591,9 @@ Some examples of when separate commits are worthwhile are:
 
 Either way, check that:
 
-- The commits are based on the current tip of the base branch.
-- The commits are clean:
-  No merge commits (except when merging a release, see [RELEASING.md](./RELEASING.md)),
-  no "[FOLD]" or "fixup!" messages.
+- The commits are based on the current tip of `develop`.
+- The commits are clean: No merge commits (except when reverse
+  merging), no "[FOLD]" or "fixup!" messages.
 - All commits are signed. If the commits are not signed by the author, use
   `git commit --amend -S` to sign them yourself.
 - At least one (but preferably all) of the commits has the PR number
@@ -632,8 +605,578 @@ use them!**
 
 ### Releases
 
-Releases, release branches, and merging releases back into `develop`
-are described in [RELEASING.md](./RELEASING.md).
+All releases, including release candidates and betas, are handled
+differently from typical PRs. Most importantly, never use
+the Github UI to merge a release.
+
+Xrpld uses a linear workflow model that can be summarized as:
+
+1. In between releases, developers work against the `develop` branch.
+2. Periodically, a maintainer will build and tag a beta version from
+   `develop`, which is pushed to `release`.
+   - Betas are usually released every two to three weeks, though that
+     schedule can vary depending on progress, availability, and other
+     factors.
+3. When the changes in `develop` are considered stable and mature enough
+   to be ready to release, a release candidate (RC) is built and tagged
+   from `develop`, and merged to `release`.
+   - Further development for that release (primarily fixes) then
+     continues against `release`, while other development continues on
+     `develop`. Effectively, `release` is forked from `develop`. Changes
+     to `release` must be reverse merged to `develop`.
+4. When the candidate has passed testing and is ready for release, the
+   final release is merged to `master`.
+5. If any issues are found post-release, a hotfix / point release may be
+   created, which is merged to `master`, and then reverse merged to
+   `develop`.
+
+#### Betas, and the first release candidate
+
+##### Preparing the `develop` branch
+
+1. Optimally, the `develop` branch will be ready to go, with all
+   relevant PRs already merged.
+2. If there are any PRs pending, merge them **BEFORE** preparing the beta.
+   1. If only one or two PRs need to be merged, merge those PRs [as
+      normal](#when-and-how-to-merge-pull-requests), updating the second
+      one, and waiting for CI to finish in between.
+   2. If there are several pending PRs, do not use the Github UI,
+      because the delays waiting for CI in between each merge will be
+      unnecessarily onerous. (Incidentally, this process can also be
+      used to merge if the Github UI has issues.) Merge each PR branch
+      directly to a `release-next` on your local machine and create a single
+      PR, then push your branch to `develop`.
+      1. Squash the changes from each PR, one commit each (unless more
+         are needed), being sure to sign each commit and update the
+         commit message to include the PR number. You may be able to use
+         a fast-forward merge for the first PR.
+      2. Push your branch.
+      3. Continue to [Making the release](#making-the-release) to update
+         the version number, etc.
+
+      The workflow may look something like:
+
+```
+git fetch --multiple upstreams user1 user2 user3 [...]
+git checkout -B release-next --no-track upstream/develop
+
+# Only do an ff-only merge if pr-branch1 is either already
+# squashed, or needs to be merged with separate commits,
+# and has no merge commits.
+# Use -S on the ff-only merge if pr-branch1 isn't signed.
+git merge [-S] --ff-only user1/pr-branch1
+
+git merge --squash user2/pr-branch2
+git commit -S # Use the commit message provided on the PR
+
+git merge --squash user3/pr-branch3
+git commit -S # Use the commit message provided on the PR
+
+[...]
+
+# Make sure the commits look right
+git log --show-signature "upstream/develop..HEAD"
+
+git push --set-upstream origin
+
+# Continue to "Making the release" to update the version number, so
+# everything can be done in one PR.
+```
+
+You can also use the [squash-branches] script.
+
+You may also need to manually close the open PRs after the changes are
+merged to `develop`. Be sure to include the commit ID.
+
+##### Making the release
+
+This includes, betas, and the first release candidate (RC).
+
+1. If you didn't create one [preparing the `develop`
+   branch](#preparing-the-develop-branch), Ensure there is no old
+   `release-next` branch hanging around. Then make a `release-next`
+   branch that only changes the version number. e.g.
+
+```
+git fetch upstreams
+
+git checkout --no-track -B release-next upstream/develop
+
+v="A.B.C-bD"
+build=$( find -name BuildInfo.cpp )
+sed 's/\(^.*versionString =\).*$/\1 "'${v}'"/' ${build} > version.cpp && mv -vi version.cpp ${build}
+
+git diff
+
+git add ${build}
+
+git commit -S -m "Set version to ${v}"
+
+# You could use your "origin" repo, but some CI tests work better on upstream.
+git push upstream-push
+git fetch upstreams
+git branch --set-upstream-to=upstream/release-next
+```
+
+You can also use the [update-version] script. 2. Create a Pull Request for `release-next` with **`develop`** as
+the base branch.
+
+1.  Use the title "[TRIVIAL] Set version to X.X.X-bX".
+2.  Instead of the default description template, use the following:
+
+```
+## High Level Overview of Change
+
+This PR only changes the version number. It will be merged as
+soon as Github CI actions successfully complete.
+```
+
+3. Wait for CI to successfully complete, and get someone to approve
+   the PR. (It is safe to ignore known CI issues.)
+4. Push the updated `develop` branch using your `release-next`
+   branch. **Do not use the Github UI. It's important to preserve
+   commit IDs.**
+
+```
+git push upstream-push release-next:develop
+```
+
+5. In the unlikely event that the push fails because someone has merged
+   something else in the meantime, rebase your branch onto the updated
+   `develop` branch, push again, and go back to step 3.
+6. Ensure that your PR against `develop` is closed. Github should do it
+   automatically.
+7. Once this is done, forward progress on `develop` can continue
+   (other PRs may be merged).
+8. Now create a Pull Request for `release-next` with **`release`** as
+   the base branch. Instead of the default template, reuse and update
+   the message from the previous release. Include the following verbiage
+   somewhere in the description:
+
+```
+The base branch is `release`. [All releases (including
+betas)](https://github.com/XRPLF/rippled/blob/develop/CONTRIBUTING.md#before-you-start)
+go in `release`. This PR branch will be pushed directly to `release` (not
+squashed or rebased, and not using the GitHub UI).
+```
+
+7. Sign-offs for the three platforms (Linux, Mac, Windows) usually occur
+   offline, but at least one approval will be needed on the PR.
+   - If issues are discovered during testing, simply abandon the
+     release. It's easy to start a new release, it should be easy to
+     abandon one. **DO NOT REUSE THE VERSION NUMBER.** e.g. If you
+     abandon 2.4.0-b1, the next attempt will be 2.4.0-b2.
+8. Once everything is ready to go, push to `release`.
+
+```
+git fetch upstreams
+
+# Just to be safe, do a dry run first:
+git push --dry-run upstream-push release-next:release
+
+# If everything looks right, push the branch
+git push upstream-push release-next:release
+
+# Check that all of the branches are updated
+git fetch upstreams
+git log -1 --oneline
+# The output should look like:
+# 0123456789 (HEAD -> upstream/release-next, upstream/release,
+#            upstream/develop) Set version to 2.4.0-b1
+# Note that upstream/develop may not be on this commit, but
+# upstream/release must be.
+# Other branches, including some from upstream-push, may also be
+# present.
+```
+
+9. Tag the release, too.
+
+```
+git tag <version number>
+git push upstream-push <version number>
+```
+
+10. Delete the `release-next` branch on the repo. Use the Github UI or:
+
+```
+git push --delete upstream-push release-next
+```
+
+11. Finally [create a new release on
+    Github](https://github.com/XRPLF/rippled/releases).
+
+#### Release candidates after the first
+
+Once the first release candidate is [merged into
+release](#making-the-release), then `release` and `develop` _are allowed
+to diverge_.
+
+If a bug or issue is discovered in a version that has a release
+candidate being tested, any fix and new version will need to be applied
+against `release`, then reverse-merged to `develop`. This helps keep git
+history as linear as possible.
+
+A `release-next` branch will be created from `release`, and any further
+work for that release must be based on `release-next`. Specifically,
+PRs must use `release-next` as the base, and those PRs will be merged
+directly to `release-next` when approved. Changes should be restricted
+to bug fixes, but other changes may be necessary from time to time.
+
+1. Open any PRs for the pending release using `release-next` as the base,
+   so they can be merged directly in to it. Unlike `develop`, though,
+   `release-next` can be thrown away and recreated if necessary.
+2. Once a new release candidate is ready, create a version commit as in
+   step 1 [above](#making-the-release) on `release-next`. You can use
+   the [update-version] script for this, too.
+3. Jump to step 8 ("Now create a Pull Request for `release-next` with
+   **`release`** as the base") from the process
+   [above](#making-the-release) to merge `release-next` into `release`.
+
+##### Follow up: reverse merge
+
+Once the RC is merged and tagged, it needs to be reverse merged into
+`develop` as soon as possible.
+
+1. Create a branch, based on `upstream/develop`.
+   The branch name is not important, but could include "mergeNNNrcN".
+   E.g. For release A.B.C-rcD, use `mergeABCrcD`.
+
+```
+git fetch upstreams
+
+git checkout --no-track -b mergeABCrcD upstream/develop
+```
+
+2. Merge `release` into your branch.
+
+```
+# I like the "--edit --log --verbose" parameters, but they are
+# not required.
+git merge upstream/release
+```
+
+3. `BuildInfo.cpp` will have a conflict with the version number.
+   Resolve it with the version from `develop` - the higher version.
+4. Push your branch to your repo (or `upstream` if you have permission),
+   and open a normal PR against `develop`. The "High level overview" can
+   simply indicate that this is a merge of the RC. The "Context" should
+   summarize the changes from the RC. Include the following text
+   prominently:
+
+```
+This PR must be merged manually using a push. Do not use the Github UI.
+```
+
+5. Depending on the complexity of the changes, and/or merge conflicts,
+   the PR may need a thorough review, or just a sign-off that the
+   merge was done correctly.
+6. If `develop` is updated before this PR is merged, do not merge
+   `develop` back into your branch. Instead rebase preserving merges,
+   or do the merge again. (See also the `rerere` git config setting.)
+
+```
+git rebase --rebase-merges upstream/develop
+# OR
+git reset --hard upstream/develop
+git merge upstream/release
+```
+
+7. When the PR is ready, push it to `develop`.
+
+```
+git fetch upstreams
+
+# Make sure the commits look right
+git log --show-signature "upstream/develop^..HEAD"
+
+git push upstream-push mergeABCrcD:develop
+
+git fetch upstreams
+```
+
+Development on `develop` can proceed as normal.
+
+#### Final releases
+
+A final release is any release that is not a beta or RC, such as 2.2.0.
+
+Only code that has already been tested and vetted across all three
+platforms should be included in a final release. Most of the time, that
+means that the commit immediately preceding the commit setting the
+version number will be an RC. Occasionally, there may be last-minute bug
+fixes included as well. If so, those bug fixes must have been tested
+internally as if they were RCs (at minimum, ensuring unit tests pass,
+and the app starts, syncs, and stops cleanly across all three
+platforms.)
+
+_If in doubt, make an RC first._
+
+The process for building a final release is very similar to [the process
+for building a beta](#making-the-release), except the code will be
+moving from `release` to `master` instead of from `develop` to
+`release`, and both branches will be pushed at the same time.
+
+1. Ensure there is no old `master-next` branch hanging around.
+   Then make a `master-next` branch that only changes the version
+   number. As above, or using the
+   [update-version] script.
+2. Create a Pull Request for `master-next` with **`master`** as
+   the base branch. Instead of the default template, reuse and update
+   the message from the previous final release. Include the following verbiage
+   somewhere in the description:
+
+```
+The base branch is `master`. This PR branch will be pushed directly to
+`release` and `master` (not squashed or rebased, and not using the
+GitHub UI).
+```
+
+7. Sign-offs for the three platforms (Linux, Mac, Windows) usually occur
+   offline, but at least one approval will be needed on the PR.
+   - If issues are discovered during testing, close the PR, delete
+     `master-next`, and move development back to `release`, [issuing
+     more RCs as necessary](#release-candidates-after-the-first)
+8. Once everything is ready to go, push to `release` and `master`.
+
+```
+git fetch upstreams
+
+# Just to be safe, do dry runs first:
+git push --dry-run upstream-push master-next:release
+git push --dry-run upstream-push master-next:master
+
+# If everything looks right, push the branch
+git push upstream-push master-next:release
+git push upstream-push master-next:master
+
+# Check that all of the branches are updated
+git fetch upstreams
+git log -1 --oneline
+# The output should look like:
+# 0123456789 (HEAD -> upstream/master-next, upstream/master,
+#            upstream/release) Set version to A.B.0
+# Note that both upstream/release and upstream/master must be on this
+# commit.
+# Other branches, including some from upstream-push, may also be
+# present.
+```
+
+9. Tag the release, too.
+
+```
+git tag <version number>
+git push upstream-push <version number>
+```
+
+10. Delete the `master-next` branch on the repo. Use the Github UI or:
+
+```
+git push --delete upstream-push master-next
+```
+
+11. [Create a new release on
+    Github](https://github.com/XRPLF/rippled/releases). Be sure that
+    "Set as the latest release" is checked.
+12. Open a PR to update the [API-CHANGELOG](API-CHANGELOG.md) and `API-VERSION-[n].md` with the changes for this release (if any are missing).
+13. Finally, [reverse merge the release into `develop`](#follow-up-reverse-merge).
+
+#### Special cases: point releases, hotfixes, etc.
+
+On occasion, a bug or issue is discovered in a version that already
+had a final release. Most of the time, development will have started
+on the next version, and will usually have changes in `develop`
+and often in `release`.
+
+Because git history is kept as linear as possible, any fix and new
+version will need to be applied against `master`.
+
+The process for building a hotfix release is very similar to [the
+process for building release candidates after the
+first](#release-candidates-after-the-first) and [for building a final
+release](#final-releases), except the changes will be done against
+`master` instead of `release`.
+
+If there is only a single issue for the hotfix, the work can be done in
+any branch. When it's ready to merge, jump to step 3 using your branch
+instead of `master-next`.
+
+1. Create a `master-next` branch from `master`.
+
+```
+git checkout --no-track -b master-next upstream/master
+git push upstream-push
+git fetch upstreams
+```
+
+2. Open any PRs for the pending hotfix using `master-next` as the base,
+   so they can be merged directly in to it. Unlike `develop`, though,
+   `master-next` can be thrown away and recreated if necessary.
+3. Once the hotfix is ready, create a version commit using the same
+   steps as above, or use the
+   [update-version] script.
+4. Create a Pull Request for `master-next` with **`master`** as
+   the base branch. Instead of the default template, reuse and update
+   the message from the previous final release. Include the following verbiage
+   somewhere in the description:
+
+```
+The base branch is `master`. This PR branch will be pushed directly to
+`master` (not squashed or rebased, and not using the GitHub UI).
+```
+
+7. Sign-offs for the three platforms (Linux, Mac, Windows) usually occur
+   offline, but at least one approval will be needed on the PR.
+   - If issues are discovered during testing, update `master-next` as
+     needed, but ensure that the changes are properly squashed, and the
+     version setting commit remains last
+8. Once everything is ready to go, push to `master` **only**.
+
+```
+git fetch upstreams
+
+# Just to be safe, do a dry run first:
+git push --dry-run upstream-push master-next:master
+
+# If everything looks right, push the branch
+git push upstream-push master-next:master
+
+# Check that all of the branches are updated
+git fetch upstreams
+git log -1 --oneline
+# The output should look like:
+# 0123456789 (HEAD -> upstream/master-next, upstream/master) Set version
+#            to 2.4.1
+# Note that upstream/master must be on this commit. upstream/release and
+# upstream/develop should not.
+# Other branches, including some from upstream-push, may also be
+# present.
+```
+
+9. Tag the release, too.
+
+```
+git tag <version number>
+git push upstream-push <version number>
+```
+
+9. Delete the `master-next` branch on the repo.
+
+```
+git push --delete upstream-push master-next
+```
+
+10. [Create a new release on
+    Github](https://github.com/XRPLF/rippled/releases). Be sure that
+    "Set as the latest release" is checked.
+
+Once the hotfix is released, it needs to be reverse merged into
+`develop` as soon as possible. It may also need to be merged into
+`release` if a release candidate is under development.
+
+1. Create a branch in your own repo, based on `upstream/develop`.
+   The branch name is not important, but could include "mergeNNN".
+   E.g. For release 2.2.3, use `merge223`.
+
+```
+git fetch upstreams
+
+git checkout --no-track -b merge223 upstream/develop
+```
+
+2. Merge master into your branch.
+
+```
+# I like the "--edit --log --verbose" parameters, but they are
+# not required.
+git merge upstream/master
+```
+
+3. `BuildInfo.cpp` will have a conflict with the version number.
+   Resolve it with the version from `develop` - the higher version.
+4. Push your branch to your repo, and open a normal PR against
+   `develop`. The "High level overview" can simply indicate that this
+   is a merge of the hotfix version. The "Context" should summarize
+   the changes from the hotfix. Include the following text
+   prominently:
+
+```
+This PR must be merged manually using a --ff-only merge. Do not use the Github UI.
+```
+
+5. Depending on the complexity of the hotfix, and/or merge conflicts,
+   the PR may need a thorough review, or just a sign-off that the
+   merge was done correctly.
+6. If `develop` is updated before this PR is merged, do not merge
+   `develop` back into your branch. Instead rebase preserving merges,
+   or do the merge again. (See also the `rerere` git config setting.)
+
+```
+git rebase --rebase-merges upstream/develop
+# OR
+git reset --hard upstream/develop
+git merge upstream/master
+```
+
+7. When the PR is ready, push it to `develop`.
+
+```
+git fetch upstreams
+
+# Make sure the commits look right
+git log --show-signature "upstream/develop..HEAD"
+
+git push upstream-push HEAD:develop
+```
+
+Development on `develop` can proceed as normal. It is recommended to
+create a beta (or RC) immediately to ensure that everything worked as
+expected.
+
+##### An even rarer scenario: A hotfix on an old release
+
+Historically, once a final release is tagged and packages are released,
+versions older than the latest final release are no longer supported.
+However, there is a possibility that a very high severity bug may occur
+in a non-amendment blocked version that is still being run by
+a significant fraction of users, which would necessitate a hotfix / point
+release to that version as well as any later versions.
+
+This scenario would follow the same basic procedure as above,
+except that _none_ of `develop`, `release`, or `master`
+would be touched during the release process.
+
+In this example, consider if version 2.1.1 needed to be patched.
+
+1. Create two branches in the main (`upstream`) repo.
+
+```
+git fetch upstreams
+
+# Create a base branch off the tag
+git checkout --no-track -b master-2.1.2 2.1.1
+git push upstream-push
+
+# Create a working branch
+git checkout --no-track -b master212-next master-2.1.2
+git push upstream-push
+
+git fetch upstreams
+```
+
+2. Work continues as above, except using `master-2.1.2`as
+   the base branch for any merging, packaging, etc.
+3. After the release is tagged and packages are built, you could
+   potentially delete both branches, e.g. `master-2.1.2` and
+   `master212-next`. However, it may be useful to keep `master-2.1.2`
+   around indefinitely for reference.
+4. Assuming that a hotfix is also released for the latest
+   version in parallel with this one, or if the issue is
+   already fixed in the latest version, do no do any
+   reverse merges. However, if it is not, it probably makes
+   sense to reverse merge `master-2.1.2` into `master`,
+   release a hotfix for _that_ version, then reverse merge
+   from `master` to `develop`. (Please don't do this unless absolutely
+   necessary.)
 
 [contrib]: https://docs.github.com/en/get-started/quickstart/contributing-to-projects
 [squash]: https://docs.github.com/en/pull-requests/collaborating-with-pull-requests/incorporating-changes-from-a-pull-request/about-pull-request-merges#squash-and-merge-your-commits
@@ -641,3 +1184,5 @@ are described in [RELEASING.md](./RELEASING.md).
 [xrpld]: https://github.com/XRPLF/rippled
 [signing]: https://docs.github.com/en/authentication/managing-commit-signature-verification/about-commit-signature-verification
 [setup-upstreams]: ./bin/git/setup-upstreams.sh
+[squash-branches]: ./bin/git/squash-branches.sh
+[update-version]: ./bin/git/update-version.sh

README.md

@@ -54,7 +54,6 @@ Here are some good places to start learning the source code:
 | `./docs`   | Source documentation files and doxygen config. |
 | `./cfg`    | Example configuration files.                   |
 | `./src`    | Source code.                                   |
-| `./crates` | Rust source code.                              |
 
 Some of the directories under `src` are external repositories included using
 git-subtree. See those directories' README files for more details.

RELEASING.md

@@ -1,152 +0,0 @@
-# Branching and Release Management
-
-This document describes how we branch, release, and merge releases back into `develop`.
-It does not define version naming
-(e.g., what constitutes a major-minor, patch, or beta release).
-
-Examples use `X.Y` for a release line:
-`X` and `Y` are placeholders, while the trailing `x` is literal,
-e.g., `release/X.Y.x` is `release/3.4.x` for the `3.4` line.
-
-## Branches
-
-| Branch          | Purpose                                                                                   |
-| :-------------- | :---------------------------------------------------------------------------------------- |
-| `develop`       | Main development branch. Betas and the first RC of a major-minor release are tagged here. |
-| `staging/X.Y.x` | Where fixes for the `X.Y` line are developed and RCs are prepared.                        |
-| `release/X.Y.x` | The last public RC or release of the `X.Y` line.                                          |
-
-A release line is named `X.Y.x`
-because one branch serves every patch release of that line (`X.Y.0`, `X.Y.1`, `X.Y.2`, ...).
-The `/` groups branches hierarchically,
-so tools can filter them and protection rules can target `release/*` and `staging/*`.
-
-## Principles
-
-- **Releases are merged back into `develop`, never cherry-picked or rebased onto it.**
-  Cherry-picked and rebased commits get new hashes,
-  so Git can't tell that `develop` already has them.
-  Future merges then replay them and produce artificial conflicts,
-  and it's hard to verify that every fix actually reached `develop`.
-  Merging keeps a single history:
-  Git knows exactly which release commits `develop` contains,
-  and no fix is left behind.
-- **Branches only move forward.**
-  `develop`, `staging/X.Y.x`, and `release/X.Y.x` are never rewritten.
-- **Cherry-picking only goes from `develop` to a staging branch**,
-  for fixes that must get into a release after the code freeze
-  (see [Emergency Fixes From `develop`](#emergency-fixes-from-develop)).
-- **Security fixes are prepared privately and published with the release that contains them**,
-  so vulnerabilities are not disclosed prematurely.
-
-## Release Lifecycle
-
-This diagram shows a major-minor release and its first patch release.
-The staging and release branches are drawn as one line.
-
-```text
-develop                            staging/X.Y.x & release/X.Y.x
-   │
-   ├── Tag: X.Y.0-b1
-   ├── Tag: X.Y.0-bN
-   ├── Tag: X.Y.0-rc1 ───────────────┐ (branches created)
-   │                                 │
-   │  (development continues)        ├── Fixes
-   │                                 ├── Tag: X.Y.0-rcN
-   │                                 ├── Tag: X.Y.0 (final)
-   ◀──── (merge) ────────────────────┤
-   │                                 ├── Fixes
-   │                                 ├── Tag: X.Y.1-rcN
-   │                                 ├── Tag: X.Y.1 (final)
-   ◀──── (merge) ────────────────────┤
-   │
-   ▼
-```
-
-### Betas, First RC & Branching
-
-> [!NOTE]
-> This phase applies only to a new major-minor release (e.g., `X.Y.0`).
-> Patch releases work on the existing branches of the line.
-
-1. **Betas:** All beta versions (e.g., `X.Y.0-b1`) are built and tagged directly on `develop`.
-2. **First RC:** We release the first RC (`X.Y.0-rc1`)
-   once everything that should be included in the release has been merged.
-3. **Branches:** `staging/X.Y.x` and `release/X.Y.x` are created from `develop`
-   at the commit tagged `X.Y.0-rc1`.
-   The first RC also kicks off the QE process.
-4. **Code freeze:** No new features or unrelated changes are pulled from `develop`
-   into `staging/X.Y.x` or `release/X.Y.x`.
-   Only critical stabilization fixes go into the line.
-5. **No large changes on `develop`:** Until `X.Y.0` is [merged back](#merging-back-into-develop),
-   large changes (e.g., big refactors, moving or renaming many files, mass reformatting)
-   are not merged into `develop`,
-   so that fixes on the line and the merge back don't run into conflicts.
-
-### Release Candidates
-
-1. Fixes are developed against `staging/X.Y.x`.
-2. When ready, a new RC is created on `staging/X.Y.x`,
-   and `release/X.Y.x` is fast-forwarded to it.
-
-RCs that contain unpublished security fixes are not published,
-and don't touch the public branches.
-
-RCs are not merged back into `develop`:
-`X.Y.0-rc1` is tagged on `develop` itself,
-and all later changes reach `develop` with the [final release](#final-release).
-
-### Final Release
-
-Security fixes become public as soon as they reach the public repo,
-so these steps happen only once the release is ready to be published,
-one right after the other.
-
-1. Unpublished security fixes, if any, are merged into `staging/X.Y.x`.
-2. `release/X.Y.x` is fast-forwarded to `staging/X.Y.x`,
-   and the release is tagged on it.
-3. The release is immediately [merged back into `develop`](#merging-back-into-develop).
-   For a major-minor release, this lifts the freeze on large changes in `develop`.
-
-### Merging Back Into `develop`
-
-The merge back is a regular PR into `develop`
-whose branch contains a real merge commit of the release tag:
-
-1. Create a branch from `develop`, run `git merge --no-ff <tag>`, and resolve any conflicts.
-2. Once the PR is approved, `develop` is fast-forwarded to the PR branch,
-   so the merge commit lands as it is.
-   Never squash or rebase it.
-   Never add it to the merge queue either: the queue squashes PRs, which would drop the merge commit.
-3. If `develop` moves while the PR is open, redo the merge on top of the new `develop`.
-
-After the merge, `git log develop..<tag>` must be empty.
-
-## Special Cases
-
-### Emergency Fixes From `develop`
-
-If a commit was merged to `develop`
-and needs to be included in a release after the code freeze:
-
-1. Create a PR that cherry-picks the commit onto `staging/X.Y.x`.
-2. Leave `develop` as it is, with no reverts.
-3. Follow the [release candidates](#release-candidates) process as usual.
-
-When the release is later merged back into `develop`,
-both sides already contain the same change,
-so the merge usually resolves it cleanly or with a trivial conflict.
-From Git's perspective, the cherry-picked commit then becomes part of `develop` too.
-
-### Several Supported Lines
-
-When a fix must ship in more than one supported line (e.g., `X.Y` and `X.(Y+1)`),
-the lines are merged upwards rather than cherry-picked between:
-
-1. The fix goes into the oldest line first.
-2. After that line's release,
-   its `release/X.Y.x` is merged into the staging branch of the next newer line,
-   and so on up to the newest line.
-3. The newest line is merged back into `develop` as usual.
-
-This way every newer line, and eventually `develop`, contains the history of the older lines.

bin/check-nix-store-refs.sh

@@ -1,111 +0,0 @@
-#!/usr/bin/env bash
-# Fail if a binary under <path> records a /nix/store path it resolves at run
-# time. See docs/build/nix.md#prebuilt-packages for why that matters.
-#
-# <path> is a file or a directory. macOS: nothing may reference the store, so
-# point it at whole trees. Linux: the toolchain always writes the store into
-# PT_INTERP and RUNPATH, so only at what cmake/PatchNixBinary.cmake retargets.
-#
-# Only Mach-O / ELF is inspected. Static archives hold store paths in debug info
-# alone; the scripts in a Conan cache are all git hook samples and autotools
-# scratch, 36 false positives to 0 real.
-#
-# Usage: bin/check-nix-store-refs.sh <path>
-
-set -euo pipefail
-
-if [ "$#" -ne 1 ]; then
-    echo "usage: $0 <path>" >&2
-    exit 2
-fi
-
-if [ ! -e "$1" ]; then
-    echo "$0: no such path: $1" >&2
-    exit 2
-fi
-
-case "$(uname -s)" in
-    Darwin)
-        format=Mach-O
-        recorded_paths=macho_recorded_paths
-        tool=otool
-        ;;
-    Linux)
-        format=ELF
-        recorded_paths=elf_recorded_paths
-        tool=readelf
-        ;;
-    *)
-        echo "Unsupported OS - skipping the Nix store reference check."
-        exit 0
-        ;;
-esac
-
-# `pipefail` would catch this too, but only as a bare nonzero exit.
-if ! command -v "${tool}" >/dev/null; then
-    echo "$0: ${tool} not found; cannot inspect binaries" >&2
-    exit 2
-fi
-
-# Both list what the file records. `ldd` would answer what this machine resolves
-# now, which is wrong both ways: store paths for a correctly patched binary,
-# silence for a store RUNPATH that resolves nowhere.
-
-# `name` covers LC_ID_DYLIB and LC_LOAD*_DYLIB, `path` covers LC_RPATH.
-macho_recorded_paths() {
-    otool -l "$1" | sed -nE 's#^ *(name|path) ([^ ]*).*#\2#p'
-}
-
-# RPATH and RUNPATH are colon-separated.
-elf_recorded_paths() {
-    readelf -ldW "$1" |
-        sed -nE \
-            -e 's#.*program interpreter: ([^]]*)\].*#\1#p' \
-            -e 's#.*\((RPATH|RUNPATH|NEEDED)\).*\[([^]]*)\].*#\2#p' |
-        tr ':' '\n'
-}
-
-checked=0
-skipped=0
-leaked=0
-
-while IFS= read -r file; do
-    case "$(file -b "${file}" 2>/dev/null)" in
-        *"${format}"*) ;;
-        *)
-            skipped=$((skipped + 1))
-            continue
-            ;;
-    esac
-    checked=$((checked + 1))
-
-    # Filter after extracting, or a search path starting elsewhere ($ORIGIN)
-    # hides the rest. `sed` not `grep`: grep calls "no matches" a failure, and
-    # the `|| true` that would need masks a broken pipeline too.
-    refs="$("${recorded_paths}" "${file}" | sed -n '\#^/nix/store/#p' | sort -u)"
-    if [ -n "${refs}" ]; then
-        leaked=$((leaked + 1))
-        echo "::error file=${file}::references the Nix store at run time"
-        echo "${file}"
-        echo "${refs}" | sed 's/^/    /'
-    fi
-done < <(find "$1" -type f \( -perm -u+x -o -name '*.dylib' -o -name '*.so*' \))
-
-echo "$1: checked ${checked}, skipped ${skipped}, ${leaked} with Nix store references."
-
-if [ "${leaked}" -ne 0 ]; then
-    cat >&2 <<'EOF'
-
-Fixes, in order of preference:
-  - A Conan package built before this check existed: drop it
-    (`conan remove '<name>/*'`) and rebuild.
-  - A binary that should have been retargeted to the system loader: check that
-    cmake/PatchNixBinary.cmake ran for it.
-  - Link the macOS system library instead of the Nix one - see
-    libresolvSystemStub in nix/darwin.nix.
-  - No system library exists (libstdc++): link it statically.
-  - None of the above: pin the toolchain into the package ID, following
-    `user.package:libc_version` in conan/profiles/ci.
-EOF
-    exit 1
-fi

bin/check-tools.sh

@@ -15,46 +15,25 @@
 #   - Windows: the core build tools only (CMake, Conan, Git, Python).
 #              MSVC is expected to be provided separately and is not checked here.
 #
-# Some tools (clang-format, clang-tidy, doxygen, gcovr, gh, git-cliff, gpg,
-# pre-commit, run-clang-tidy) are present in our Linux CI images and in local
-# development setups, but not in the macOS CI environment. They are checked
-# everywhere except when running in CI on macOS.
-#
-# Tools that Nix also exposes under a version-suffixed name (`clang-tidy-22`,
-# `g++-15`, ...) are probed under both names: a suffixed name can break while
-# the plain one still works (see mkVersionedToolLinks in nix/packages.nix).
-#
-# Tools scoped to a single dev shell rather than to commonPackages are checked
-# only in that shell, keyed off XRPL_DEVSHELL.
+# Some tools (clang-format, doxygen, gcovr, gh, git-cliff, gpg, pre-commit,
+# run-clang-tidy) are present in our Linux CI images and in local development
+# setups, but not in the macOS CI environment. They are checked everywhere
+# except when running in CI on macOS.
 #
 # Environment variables:
 #   CI                      if set, skip the tools above when on macOS.
 #   CHECK_TOOLS_SKIP_CLONE  if set, skip the git-over-HTTPS connectivity check.
-#   XRPL_DEVSHELL           active dev shell; selects shell-specific tools.
 
 set -uo pipefail
 
-# Version suffixes of the Nix tool links, tracking nix/packages.nix.
-gcc_version=15
-llvm_version=22
-
 missing=()
 checked=0
 
-# tool_path <name>
-# Fully resolved path of a tool, so the snapshots record which derivation
-# provides it. Prints nothing when it isn't on PATH.
-tool_path() {
-    local path
-    path="$(command -v "$1" 2>/dev/null)" || return 0
-    readlink -f "${path}" 2>/dev/null || printf '%s' "${path}"
-}
-
 # check <name> [probe-command...]
 # Runs the probe (default: "<name> --version"), capturing both stdout and
-# stderr, and prints three lines: the status and name, the first non-blank line
-# of the probe output (its version, or the error when it failed), and the tool's
-# resolved path. Records <name> as missing if it is not found or exits non-zero.
+# stderr, and prints one aligned line: the status, the name, and the first
+# non-blank line of the probe output (its version). Records <name> as missing
+# if the command is not found or exits non-zero.
 check() {
     local name="$1"
     shift
@@ -64,17 +43,14 @@ check() {
     fi
 
     checked=$((checked + 1))
-    local output version path
-    path="$(tool_path "${name}")"
+    local output version
     if output="$("${probe[@]}" 2>&1)"; then
-        printf '  ✅ %s\n' "${name}"
+        version="$(printf '%s\n' "${output}" | grep -m1 '[^[:space:]]' || true)"
+        printf '  [ ok ] %-20s %s\n' "${name}" "${version}"
     else
-        printf '  ❌ %s\n' "${name}"
+        printf '  [MISS] %s\n' "${name}"
         missing+=("${name}")
     fi
-    version="$(printf '%s\n' "${output}" | grep -m1 '[^[:space:]]' || true)"
-    printf '     %s\n' "${version:-(no output)}"
-    printf '     %s\n' "${path:-(not found)}"
 }
 
 case "$(uname -s)" in
@@ -106,9 +82,7 @@ if [ "${os}" = "linux" ] || [ "${os}" = "macos" ]; then
     echo "Development tooling:"
     check ccache
     check clang
-    check "clang-${llvm_version}"
     check clang++
-    check "clang++-${llvm_version}"
     check ClangBuildAnalyzer
     check curl
     check file
@@ -127,14 +101,7 @@ if [ "${os}" = "linux" ] || [ "${os}" = "macos" ]; then
     # setups, but not in the macOS CI environment. So check them everywhere
     # except when running in CI on macOS.
     if [ "${os}" = "linux" ] || [ -z "${CI:-}" ]; then
-        check clang-apply-replacements
-        check "clang-apply-replacements-${llvm_version}"
         check clang-format
-        check "clang-format-${llvm_version}"
-        # clang-tidy leads --version with the LLVM banner, not the version.
-        tidy_probe="--version | grep -m1 -oE 'LLVM version [0-9.]+'"
-        check clang-tidy sh -c "clang-tidy ${tidy_probe}"
-        check "clang-tidy-${llvm_version}" sh -c "clang-tidy-${llvm_version} ${tidy_probe}"
         check dot
         check doxygen
         check gcovr
@@ -145,7 +112,6 @@ if [ "${os}" = "linux" ] || [ "${os}" = "macos" ]; then
         # pre-commit, or its alternative implementation prek
         check pre-commit sh -c 'pre-commit --version || prek --version'
         check run-clang-tidy run-clang-tidy --help
-        check "run-clang-tidy-${llvm_version}" "run-clang-tidy-${llvm_version}" --help
     fi
 fi
 
@@ -160,32 +126,19 @@ if [ "${os}" = "linux" ] || [ "${os}" = "macos" ]; then
     check cargo-audit cargo audit --version
     check cargo-llvm-cov cargo llvm-cov --version
     check cargo-nextest cargo nextest --version
-    check clippy-driver
+    check clippy clippy-driver --version
     check rust-analyzer
-    check rust-nightly rust-nightly run rustc --version
     check rustc
     check rustfmt
 fi
 
-# Lean4 is in the formal-verification shell only, not in commonPackages.
-if [ "${XRPL_DEVSHELL:-}" = "formal-verification" ]; then
-    echo
-    echo "Formal verification toolchain:"
-    check lean
-    check lake
-fi
-
 # GCC is the default compiler on Linux. macOS uses the system Apple Clang
 # instead, so GCC/g++/gcov are not expected there.
 if [ "${os}" = "linux" ]; then
     echo
     echo "GCC toolchain:"
     check gcc
-    check "gcc-${gcc_version}"
     check g++
-    check "g++-${gcc_version}"
-    check cpp
-    check "cpp-${gcc_version}"
     check gcov
 
     echo
@@ -210,9 +163,9 @@ else
     checked=$((checked + 1))
     tmp_clone="$(mktemp -d)"
     if git clone --depth 1 https://github.com/XRPLF/actions.git "${tmp_clone}/actions" >/dev/null 2>&1; then
-        printf '  ✅ git clone over HTTPS\n'
+        printf '  [ ok ] git clone over HTTPS\n'
     else
-        printf '  ❌ git clone over HTTPS\n'
+        printf '  [MISS] git clone over HTTPS\n'
         missing+=("git-https-clone")
     fi
     rm -rf "${tmp_clone}"
@@ -220,9 +173,9 @@ fi
 
 echo
 if [ "${#missing[@]}" -eq 0 ]; then
-    echo "✅ All ${checked} checked tools are present and runnable."
+    echo "All ${checked} checked tools are present and runnable."
 else
-    echo "❌ Missing or non-functional tools (${#missing[@]} of ${checked}):" >&2
+    echo "Missing or non-functional tools (${#missing[@]} of ${checked}):" >&2
     for tool in "${missing[@]}"; do
         echo "  - ${tool}" >&2
     done

bin/git/update-version.sh

@@ -0,0 +1,56 @@
+#!/bin/bash
+
+if [[ $# -ne 3 || "$1" == "--help" || "$1" = "-h" ]]; then
+    name=$(basename $0)
+    cat <<-USAGE
+    Usage: $name workbranch base/branch version
+
+    * workbranch will be created locally from base/branch. If it exists,
+        it will be reused, so make sure you don't overwrite any work.
+    * base/branch may be specified as user:branch to allow easy copying
+        from Github PRs.
+USAGE
+    exit 0
+fi
+
+work="$1"
+shift
+
+base=$(echo "$1" | sed "s/:/\//")
+shift
+
+version=$1
+shift
+
+set -e
+
+git fetch upstreams
+
+git checkout -B "${work}" --no-track "${base}"
+
+push=$(git rev-parse --abbrev-ref --symbolic-full-name '@{push}' \
+    2>/dev/null) || true
+if [[ "${push}" != "" ]]; then
+    echo "Warning: ${push} may already exist."
+fi
+
+build=$(find -name BuildInfo.cpp)
+sed 's/\(^.*versionString =\).*$/\1 "'${version}'"/' ${build} >version.cpp &&
+    diff "${build}" version.cpp && exit 1 ||
+    mv -vi version.cpp ${build}
+
+git diff
+
+git add ${build}
+
+git commit -S -m "Set version to ${version}"
+
+git log --oneline --first-parent ${base}^..
+
+cat <<PUSH
+
+-------------------------------------------------------------------
+This script will not push. Verify everything is correct, then push
+to your repo, and create a PR as described in CONTRIBUTING.md.
+-------------------------------------------------------------------
+PUSH

bin/pre-commit/check_rust_coverage_attrs.py

@@ -1,149 +0,0 @@
-#!/usr/bin/env python3
-"""
-Check that Rust unit tests stay out of the coverage report.
-
-cargo-llvm-cov instruments the test code along with everything else, so a test
-module that is not excluded counts its own body as covered and inflates the
-reported number. Excluding it takes two attributes:
-
-  * every `#[cfg(test)]` module carries
-    `#[cfg_attr(coverage_nightly, coverage(off))]`;
-  * every crate root (lib.rs, main.rs) carries
-    `#![cfg_attr(coverage_nightly, feature(coverage_attribute))]`, which the
-    attribute above needs in order to compile.
-
-Both are inert outside the coverage job: cargo-llvm-cov defines
-`coverage_nightly` only when it runs on a nightly toolchain.
-
-The crate-root gate is checked even in a crate that has no tests yet, because
-that is what lets the first test module added later carry the attribute without
-a build failure. Missing it is a hard error, so it cannot go unnoticed; a
-missing `coverage(off)` fails open, which is why this check exists.
-
-Matching is on exact attribute text, which works because `cargo fmt` runs over
-the whole workspace in the hook ahead of this one: rustfmt puts every attribute
-on its own line and normalizes what is inside it, turning `#[cfg( test )]`
-and `#[cfg(test,)]` alike into `#[cfg(test)]`. So there is nothing here that
-parses Rust. The price is that a cfg this file does not spell out literally --
-`all(test, ...)`, `any(test, ...)`, `not(test)` -- is reported rather than
-classified, on the grounds that guessing at coverage semantics is how a check
-like this ends up quietly wrong.
-
-Usage: ./bin/pre-commit/check_rust_coverage_attrs.py <file1> <file2> ...
-
-Exit status is non-zero if any violation is found.
-"""
-
-import re
-import sys
-from dataclasses import dataclass
-from pathlib import Path
-
-CRATE_ROOTS = {"lib.rs", "main.rs"}
-
-FEATURE_ATTR = "#![cfg_attr(coverage_nightly, feature(coverage_attribute))]"
-COVERAGE_OFF_ATTR = "#[cfg_attr(coverage_nightly, coverage(off))]"
-CFG_TEST_ATTR = "#[cfg(test)]"
-
-# Any other cfg that mentions `test`. String literals are blanked before this
-# runs, so `feature = "test"` does not read as the `test` cfg.
-RE_CFG_MENTIONS_TEST = re.compile(r"^#\[cfg\(.*\btest\b.*\)\]$")
-RE_STRING = re.compile(r'"(?:[^"\\]|\\.)*"')
-RE_MOD = re.compile(r"^(?:pub(?:\([^)]*\))?\s+)?mod\s+([A-Za-z_]\w*)")
-
-
-@dataclass(frozen=True)
-class Finding:
-    line: int
-    label: str
-    message: str
-
-
-def _check_module(attrs: list[str], line: int, name: str) -> list[Finding]:
-    """Findings for one module, given the attributes attached to it."""
-    if COVERAGE_OFF_ATTR in attrs:
-        return []  # excluded from coverage; which cfg gates it does not matter
-    if CFG_TEST_ATTR in attrs:
-        return [
-            Finding(
-                line,
-                "missing-coverage-off",
-                f"`mod {name}` is #[cfg(test)] but not excluded from coverage; "
-                f"add {COVERAGE_OFF_ATTR}",
-            )
-        ]
-    unclassified = [
-        attr for attr in attrs if RE_CFG_MENTIONS_TEST.match(RE_STRING.sub('""', attr))
-    ]
-    if unclassified:
-        return [
-            Finding(
-                line,
-                "unclassified-cfg",
-                f"`mod {name}` is gated on {unclassified[0]}, which this check "
-                f"cannot tell apart from a module that ships in the library; "
-                f"add {COVERAGE_OFF_ATTR} if it is test-only, or teach this "
-                f"check the cfg if it is not",
-            )
-        ]
-    return []
-
-
-def _check_test_modules(lines: list[str]) -> list[Finding]:
-    """Findings for every test module that is not excluded from coverage."""
-    findings: list[Finding] = []
-    attrs: list[str] = []
-    attrs_line = 0
-    for number, raw in enumerate(lines, start=1):
-        stripped = raw.strip()
-        # Blank lines and comments are allowed between an attribute and its item.
-        if not stripped or stripped.startswith("//"):
-            continue
-        if stripped.startswith("#["):
-            if not attrs:
-                attrs_line = number
-            attrs.append(stripped)
-            continue
-        module = RE_MOD.match(stripped)
-        if module is not None and attrs:
-            findings += _check_module(attrs, attrs_line, module.group(1))
-        attrs = []
-    return findings
-
-
-def _check_crate_root(name: str, lines: list[str]) -> list[Finding]:
-    """A finding if a crate root is missing the coverage_attribute feature gate."""
-    if name not in CRATE_ROOTS:
-        return []
-    if any(line.strip() == FEATURE_ATTR for line in lines):
-        return []
-    return [
-        Finding(
-            1,
-            "missing-feature-gate",
-            f"crate root is missing {FEATURE_ATTR}",
-        )
-    ]
-
-
-def check_source(name: str, text: str) -> list[Finding]:
-    """Findings for one file's contents; `name` is its base name (lib.rs, ...)."""
-    lines = text.splitlines()
-    return _check_crate_root(name, lines) + _check_test_modules(lines)
-
-
-def check_file(path: Path) -> list[Finding]:
-    return check_source(path.name, path.read_text(encoding="utf-8"))
-
-
-def main() -> int:
-    total = 0
-    for path in (Path(name) for name in sys.argv[1:]):
-        for finding in check_file(path):
-            total += 1
-            print(f"{path}:{finding.line}: {finding.label}: {finding.message}")
-    return 1 if total else 0
-
-
-if __name__ == "__main__":
-    sys.exit(main())

bin/pre-commit/fix_gtest_names.py

@@ -1,144 +0,0 @@
-#!/usr/bin/env python3
-
-"""
-Rewrites gtest names to the required style in this project: the suite name is
-CamelCase, the test-case name is snake_case.
-
-    TEST(SuiteName, test_case_name)
-
-The gtest `DISABLED_` prefix is kept verbatim on either name.
-
-Both conversions fold acronyms the way a reader expects:
-`SetAndResetAccountTxnID` -> `set_and_reset_account_txn_id`, not
-`set_and_reset_account_txn_i_d`.
-
-The first argument of `TEST_F`, `TEST_P`, `TYPED_TEST` and `TYPED_TEST_P` is a
-fixture class rather than a free identifier, so rewriting it here would leave
-the class it names behind. Those are reported for a human to rename (clang-tidy
-checks the class declaration itself, via readability-identifier-naming).
-
-Usage: ./bin/pre-commit/fix_gtest_names.py <file1> <file2> ...
-"""
-
-import re
-import sys
-from collections import Counter
-from pathlib import Path
-
-# A test-case definition, `MACRO(SuiteOrFixture, TestName)`, anchored at the
-# start of a line so that commented-out definitions and project macros that
-# merely look similar (`TEST_EXPECT(...)`) are left alone. The `\s*` between
-# arguments allows for a definition clang-format wrapped over several lines.
-PATTERN = re.compile(
-    r"(?P<head>^[ \t]*(?P<macro>TYPED_TEST_P|TYPED_TEST|TEST_F|TEST_P|TEST)\s*\(\s*)"
-    r"(?P<suite>\w+)(?P<mid>\s*,\s*)(?P<name>\w+)(?P<tail>\s*\))",
-    re.MULTILINE,
-)
-
-# The macros whose first argument names a fixture class, not a free identifier.
-FIXTURE_MACROS = ("TEST_F", "TEST_P", "TYPED_TEST", "TYPED_TEST_P")
-
-DISABLED = "DISABLED_"
-
-ACRONYM_BOUNDARY = re.compile(r"([A-Z]+)([A-Z][a-z])")
-WORD_BOUNDARY = re.compile(r"([a-z\d])([A-Z])")
-
-
-def _split_disabled(name: str) -> tuple[str, str]:
-    """Splits off gtest's `DISABLED_` prefix, which is kept verbatim."""
-    if name.startswith(DISABLED):
-        return DISABLED, name[len(DISABLED) :]
-    return "", name
-
-
-def snake_case(name: str) -> str:
-    """Returns the name in snake_case, leaving acronyms whole.
-
-    `SetAndResetAccountTxnID` -> `set_and_reset_account_txn_id`,
-    `parseStatRSSkB` -> `parse_stat_rs_sk_b`.
-    """
-    prefix, core = _split_disabled(name)
-    core = ACRONYM_BOUNDARY.sub(r"\1_\2", core)
-    return prefix + WORD_BOUNDARY.sub(r"\1_\2", core).lower()
-
-
-def camel_case(name: str) -> str:
-    """Returns the name in CamelCase, capitalizing each underscored word.
-
-    Only the letters that have to change are touched, so acronyms survive: a
-    conversion that went via snake_case would turn `SHAMapTest` into
-    `ShaMapTest`, whereas here it is already CamelCase and stays put.
-    `json_value` -> `JsonValue`, `parseStatRSSkB` -> `ParseStatRSSkB`.
-    """
-    prefix, core = _split_disabled(name)
-    return prefix + "".join(w[:1].upper() + w[1:] for w in core.split("_") if w)
-
-
-def _corrected(match: re.Match) -> tuple[str, str]:
-    """Returns the suite and test-case names this definition should end up with."""
-    suite = match["suite"]
-    return (
-        suite if match["macro"] in FIXTURE_MACROS else camel_case(suite),
-        snake_case(match["name"]),
-    )
-
-
-def fix_source(text: str) -> tuple[str, list[str]]:
-    """Returns the corrected text and one `line: message` report per bad name."""
-    # gtest joins the suite and test names into one class name, so two test
-    # cases whose joined names agree cannot coexist: `TEST(a, b_c)` and
-    # `TEST(a_b, c)` both define `a_b_c_Test`. A rename that would introduce
-    # such a clash is reported for a human instead of applied.
-    joined = Counter("_".join(_corrected(m)) for m in PATTERN.finditer(text))
-    reports = []
-
-    def rewrite(match: re.Match) -> str:
-        suite, name = match["suite"], match["name"]
-        new_suite, new_name = _corrected(match)
-        line = text.count("\n", 0, match.start()) + 1
-
-        if match["macro"] in FIXTURE_MACROS and camel_case(suite) != suite:
-            reports.append(
-                f"{line}: fixture '{suite}' is not CamelCase: rename the class "
-                f"to '{camel_case(suite)}' by hand"
-            )
-        if (new_suite, new_name) == (suite, name):
-            return match[0]
-        if joined[f"{new_suite}_{new_name}"] > 1:
-            reports.append(
-                f"{line}: cannot rename '{suite}, {name}' to '{new_suite}, "
-                f"{new_name}': another test case already generates that name"
-            )
-            return match[0]
-        if new_suite != suite:
-            reports.append(f"{line}: renamed suite '{suite}' to '{new_suite}'")
-        if new_name != name:
-            reports.append(f"{line}: renamed test case '{name}' to '{new_name}'")
-        return match["head"] + new_suite + match["mid"] + new_name + match["tail"]
-
-    return PATTERN.sub(rewrite, text), reports
-
-
-def fix_names(path: Path) -> bool:
-    """Corrects one file's gtest names, reporting each on stdout."""
-    original = path.read_text(encoding="utf-8")
-    fixed, reports = fix_source(original)
-    for report in reports:
-        print(f"{path}:{report}")
-    if fixed != original:
-        path.write_text(fixed, encoding="utf-8")
-    return not reports
-
-
-def main() -> int:
-    files = [Path(f) for f in sys.argv[1:]]
-    success = True
-
-    for path in files:
-        success &= fix_names(path)
-
-    return 0 if success else 1
-
-
-if __name__ == "__main__":
-    sys.exit(main())

bin/pre-commit/test_fix_gtest_names.py

@@ -1,259 +0,0 @@
-#!/usr/bin/env python3
-"""
-Tests for fix_gtest_names.py.
-
-Run directly (no test framework needed):
-    ./bin/pre-commit/test_fix_gtest_names.py
-or under pytest:
-    pytest bin/pre-commit/test_fix_gtest_names.py
-"""
-
-import sys
-import textwrap
-
-from fix_gtest_names import camel_case, fix_source, snake_case
-
-
-def dedent(text: str) -> str:
-    """Removes a fixture's common indentation and its leading newline.
-
-    Lets fixtures be written as indented triple-quoted here-docs while keeping
-    honest 1-based line numbers.
-    """
-    return textwrap.dedent(text).lstrip("\n")
-
-
-def fixed(text: str) -> str:
-    return fix_source(dedent(text))[0]
-
-
-def reports(text: str) -> list[str]:
-    return fix_source(dedent(text))[1]
-
-
-# --- conversion --------------------------------------------------------------
-
-
-def test_snake_case_conversion() -> None:
-    assert snake_case("BadInputs") == "bad_inputs"
-    assert snake_case("mulDiv") == "mul_div"
-    assert snake_case("already_snake") == "already_snake"
-    assert snake_case("base64") == "base64"
-
-
-def test_snake_case_keeps_acronyms_whole() -> None:
-    assert snake_case("SetAndResetAccountTxnID") == "set_and_reset_account_txn_id"
-    assert snake_case("XRPToIOU") == "xrp_to_iou"
-    assert snake_case("STAmountMath") == "st_amount_math"
-
-
-def test_camel_case_conversion() -> None:
-    assert camel_case("json_value") == "JsonValue"
-    assert camel_case("mulDiv") == "MulDiv"
-    assert camel_case("scope") == "Scope"
-    assert camel_case("base64") == "Base64"
-
-
-def test_camel_case_leaves_acronyms_alone() -> None:
-    # A snake_case round-trip would give `ShaMapTest` / `ParseStatmRsSkB` here.
-    assert camel_case("SHAMapTest") == "SHAMapTest"
-    assert camel_case("parseStatmRSSkB") == "ParseStatmRSSkB"
-    assert camel_case("XRPAmount") == "XRPAmount"
-    assert camel_case("CSPRNG") == "CSPRNG"
-
-
-def test_disabled_prefix_preserved() -> None:
-    assert snake_case("DISABLED_FooBar") == "DISABLED_foo_bar"
-    assert snake_case("DISABLED_foo_bar") == "DISABLED_foo_bar"
-    assert snake_case("DISABLED_") == "DISABLED_"
-    assert camel_case("DISABLED_foo_bar") == "DISABLED_FooBar"
-    assert camel_case("DISABLED_") == "DISABLED_"
-
-
-# --- what counts as a test definition ---------------------------------------
-
-
-def test_all_macros_recognized() -> None:
-    code = """
-    TEST(Suite, oneName)
-    TEST_F(Fixture, twoName)
-    TEST_P(Fixture, threeName)
-    TYPED_TEST(Fixture, fourName)
-    TYPED_TEST_P(Fixture, fiveName)
-    """
-    assert fixed(code) == dedent("""
-        TEST(Suite, one_name)
-        TEST_F(Fixture, two_name)
-        TEST_P(Fixture, three_name)
-        TYPED_TEST(Fixture, four_name)
-        TYPED_TEST_P(Fixture, five_name)
-        """)
-
-
-def test_conforming_definitions_untouched() -> None:
-    code = """
-    TEST(AccountSet, bad_inputs)
-    TEST_F(MutexMakeTest, default_constructor)
-    TEST(SHAMap, DISABLED_slow_path)
-    """
-    assert reports(code) == []
-    assert fixed(code) == dedent(code)
-
-
-def test_lookalikes_ignored() -> None:
-    code = """
-    // TEST(Suite, notATest)
-    TEST_EXPECT(someCall())
-    TEST_EXPECTS(amount == value, amount.getText())
-    INSTANTIATE_TEST_SUITE_P(Prefix, Fixture, testValues());
-    auto x = TEST(Suite, notATest);
-    TYPED_TEST_SUITE(Fixture, MyTypes);
-    """
-    assert reports(code) == []
-    assert fixed(code) == dedent(code)
-
-
-def test_indented_and_wrapped_definitions() -> None:
-    code = """
-    namespace ripple {
-        TEST(Suite, indentedName)
-    }
-    TEST_F(
-        SomeVeryLongFixtureName,
-        wrappedName)
-    """
-    assert fixed(code) == dedent("""
-        namespace ripple {
-            TEST(Suite, indented_name)
-        }
-        TEST_F(
-            SomeVeryLongFixtureName,
-            wrapped_name)
-        """)
-
-
-# --- rewriting --------------------------------------------------------------
-
-
-def test_only_the_two_names_are_rewritten() -> None:
-    code = """
-    TEST(mulDiv, mulDiv)
-    {
-        auto const mulDiv = 1;  // mulDiv stays
-    }
-    """
-    assert fixed(code) == dedent("""
-        TEST(MulDiv, mul_div)
-        {
-            auto const mulDiv = 1;  // mulDiv stays
-        }
-        """)
-
-
-def test_suite_name_camel_cased() -> None:
-    code = """
-    TEST(json_value, limits)
-    TEST(scope, ScopeExit)
-    """
-    assert reports(code) == [
-        "1: renamed suite 'json_value' to 'JsonValue'",
-        "2: renamed suite 'scope' to 'Scope'",
-        "2: renamed test case 'ScopeExit' to 'scope_exit'",
-    ]
-    assert fixed(code) == dedent("""
-        TEST(JsonValue, limits)
-        TEST(Scope, scope_exit)
-        """)
-
-
-def test_fixture_reported_but_not_renamed() -> None:
-    # The first argument names a class, so only a human (or clang-tidy) can
-    # rename it; the test-case name is still fixed.
-    code = """
-    TEST_F(my_fixture, someTest)
-    """
-    assert reports(code) == [
-        "1: fixture 'my_fixture' is not CamelCase: rename the class to "
-        "'MyFixture' by hand",
-        "1: renamed test case 'someTest' to 'some_test'",
-    ]
-    assert fixed(code) == dedent("""
-        TEST_F(my_fixture, some_test)
-        """)
-
-
-def test_reports_carry_line_numbers() -> None:
-    code = """
-    #include <foo.h>
-
-    TEST(Suite, firstName)
-
-    TEST(Suite, secondName)
-    """
-    assert reports(code) == [
-        "3: renamed test case 'firstName' to 'first_name'",
-        "5: renamed test case 'secondName' to 'second_name'",
-    ]
-
-
-# --- collisions -------------------------------------------------------------
-
-
-def test_collision_reported_and_not_applied() -> None:
-    # Both would define `Suite_mul_div_Test`.
-    code = """
-    TEST(Suite, mulDiv)
-    TEST(Suite, mul_div)
-    """
-    assert reports(code) == [
-        "1: cannot rename 'Suite, mulDiv' to 'Suite, mul_div': another test "
-        "case already generates that name"
-    ]
-    assert fixed(code) == dedent(code)
-
-
-def test_collision_between_converging_suites() -> None:
-    # Both suites camel-case to `SuiteA`, so both would define
-    # `SuiteA_one_test_Test`.
-    code = """
-    TEST(SuiteA, oneTest)
-    TEST(Suite_a, one_test)
-    """
-    assert [r.split(":")[1].strip() for r in reports(code)] == [
-        "cannot rename 'SuiteA, oneTest' to 'SuiteA, one_test'",
-        "cannot rename 'Suite_a, one_test' to 'SuiteA, one_test'",
-    ]
-    assert fixed(code) == dedent(code)
-
-
-def test_same_name_in_different_suites_is_not_a_collision() -> None:
-    code = """
-    TEST(SuiteOne, mulDiv)
-    TEST(SuiteTwo, mulDiv)
-    """
-    assert fixed(code) == dedent("""
-        TEST(SuiteOne, mul_div)
-        TEST(SuiteTwo, mul_div)
-        """)
-
-
-def main() -> int:
-    tests = sorted(
-        (name, fn)
-        for name, fn in globals().items()
-        if name.startswith("test_") and callable(fn)
-    )
-    failed = 0
-    for name, fn in tests:
-        try:
-            fn()
-            print(f"PASS {name}")
-        except AssertionError as exc:
-            failed += 1
-            print(f"FAIL {name}: {exc!r}")
-    print(f"\n{len(tests) - failed}/{len(tests)} passed")
-    return 1 if failed else 0
-
-
-if __name__ == "__main__":
-    sys.exit(main())

cfg/xrpld-example.cfg

@@ -1094,8 +1094,8 @@
 #                           Default is 100.
 #
 #       back_off_milliseconds
-#                           Number of milliseconds to wait between online_delete
-#                           SQL deletion batches to allow other functions
+#                           Number of milliseconds to wait between
+#                           online_delete batches to allow other functions
 #                           to catch up.
 #                           Default is 100.
 #
@@ -1109,22 +1109,10 @@
 #                           The online delete process checks periodically
 #                           that xrpld is still in sync with the network,
 #                           and that the validated ledger is less than
-#                           'age_threshold_seconds' old, and that all
-#                           recent ledgers are available. If not, then continue
+#                           'age_threshold_seconds' old. If not, then continue
 #                           sleeping for this number of seconds and
 #                           checking until healthy.
-#                           Default is 2.
-#
-#       max_waiting_ledgers
-#                           The maximum number of ledgers that may be validated
-#                           while online deletion is waiting for the node to get
-#                           fully synced with the rest of the network. If more than
-#                           this number of ledgers are validated while waiting, then
-#                           online deletion gives up on the current ledger and tries
-#                           again later. Note this only affects situations that cause
-#                           rotation to wait, such as going out of sync, or missing
-#                           ledgers. Forward progress is not penalized. Minimum is 64.
-#                           Default is the online_delete value.
+#                           Default is 5.
 #
 #   Notes:
 #       The 'node_db' entry configures the primary, persistent storage.

cmake/GitInfo.cmake

@@ -0,0 +1,28 @@
+include_guard()
+
+set(GIT_BUILD_BRANCH "")
+set(GIT_COMMIT_HASH "")
+
+find_package(Git)
+if(NOT Git_FOUND)
+    message(WARNING "Git not found. Git branch and commit hash will be empty.")
+    return()
+endif()
+
+set(GIT_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}/.git)
+
+execute_process(
+    COMMAND
+        ${GIT_EXECUTABLE} --git-dir=${GIT_DIRECTORY} rev-parse --abbrev-ref HEAD
+    OUTPUT_STRIP_TRAILING_WHITESPACE
+    OUTPUT_VARIABLE GIT_BUILD_BRANCH
+)
+
+execute_process(
+    COMMAND ${GIT_EXECUTABLE} --git-dir=${GIT_DIRECTORY} rev-parse HEAD
+    OUTPUT_STRIP_TRAILING_WHITESPACE
+    OUTPUT_VARIABLE GIT_COMMIT_HASH
+)
+
+message(STATUS "Git branch: ${GIT_BUILD_BRANCH}")
+message(STATUS "Git commit hash: ${GIT_COMMIT_HASH}")

cmake/XrplCompiler.cmake

@@ -120,10 +120,7 @@ if(MSVC)
             _SILENCE_ALL_CXX17_DEPRECATION_WARNINGS
             $<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:Debug>>:_CRTDBG_MAP_ALLOC>
     )
-    target_link_libraries(
-        common
-        INTERFACE -errorreport:none -machine:X64 -ignore:4099
-    )
+    target_link_libraries(common INTERFACE -errorreport:none -machine:X64)
 else()
     target_compile_options(
         common

cmake/XrplCore.cmake

@@ -51,8 +51,6 @@ target_compile_options(
 
 target_link_libraries(xrpl.libpb PUBLIC protobuf::libprotobuf gRPC::grpc++)
 
-add_dependencies(tidy_prerequisites xrpl.libpb)
-
 # TODO: Clean up the number of library targets later.
 add_library(xrpl.imports.main INTERFACE)
 
@@ -81,7 +79,7 @@ include(target_link_modules)
 add_module(xrpl beast)
 target_link_libraries(xrpl.libxrpl.beast PUBLIC xrpl.imports.main)
 
-include(XrplVersion)
+include(GitInfo)
 add_module(xrpl git)
 target_compile_definitions(
     xrpl.libxrpl.git
@@ -111,11 +109,6 @@ target_link_libraries(
     xrpl.libxrpl.protocol
     PUBLIC xrpl.libxrpl.crypto xrpl.libxrpl.git xrpl.libxrpl.json
 )
-# Only on BuildInfo.cpp, so a new version does not rebuild the whole module.
-set_source_files_properties(
-    ${CMAKE_CURRENT_SOURCE_DIR}/src/libxrpl/protocol/BuildInfo.cpp
-    PROPERTIES COMPILE_DEFINITIONS XRPLD_VERSION="${XRPLD_VERSION}"
-)
 
 # Level 05
 add_module(xrpl protocol_autogen)
@@ -301,14 +294,7 @@ if(xrpld)
         target_sources(xrpld PRIVATE ${sources})
     endif()
 
-    target_link_libraries(
-        xrpld
-        Xrpl::boost
-        Xrpl::opts
-        Xrpl::libs
-        xrpl.libxrpl
-        rpcspec::rpcspec
-    )
+    target_link_libraries(xrpld Xrpl::boost Xrpl::opts Xrpl::libs xrpl.libxrpl)
     exclude_if_included(xrpld)
     # define a macro for tests that might need to
     # be excluded or run differently in CI environment

cmake/XrplCov.cmake

@@ -48,7 +48,7 @@ setup_target_for_coverage_gcovr(
         "include/xrpl/beast/test"
         "include/xrpl/beast/unit_test"
         "${CMAKE_BINARY_DIR}/pb-xrpl.libpb"
-    DEPENDENCIES xrpld xrpl_tests xrpld_tests
+    DEPENDENCIES xrpld xrpl_tests
 )
 
 add_code_coverage_to_target(opts INTERFACE)

cmake/XrplPackaging.cmake

@@ -1,7 +1,7 @@
 #[===================================================================[
    Linux packaging support: 'package' target.
 
-   The packaging script (package/build_pkg.py) installs to FHS-standard
+   The packaging script (package/build_pkg.sh) installs to FHS-standard
    paths (/usr/bin, /etc/xrpld, etc.) regardless of CMAKE_INSTALL_PREFIX,
    so no prefix guard is needed here.
 #]===================================================================]
@@ -38,26 +38,19 @@ if(NOT TARGET validator-keys)
     return()
 endif()
 
-if(DPKG_BUILDPACKAGE_EXECUTABLE)
-    set(pkg_type deb)
-else()
-    set(pkg_type rpm)
-endif()
-
-# Unquoted below, so an empty value adds no argument at all.
-set(pkg_variant_option "")
-if(assert)
-    set(pkg_variant_option --variant=assert)
-endif()
+set(package_env
+    SRC_DIR=${CMAKE_SOURCE_DIR}
+    BUILD_DIR=${CMAKE_BINARY_DIR}
+    PKG_RELEASE=${pkg_release}
+)
 
 add_custom_target(
     package
     COMMAND
-        ${CMAKE_SOURCE_DIR}/package/build_pkg.py --package-type=${pkg_type}
-        --build-dir=${CMAKE_BINARY_DIR} --pkg-release=${pkg_release}
-        ${pkg_variant_option} --channel=UNRELEASED
+        ${CMAKE_COMMAND} -E env ${package_env}
+        ${CMAKE_SOURCE_DIR}/package/build_pkg.sh
     WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
     DEPENDS xrpld validator-keys
-    COMMENT "Building Linux ${pkg_type} package"
+    COMMENT "Building Linux package (deb/rpm inferred from host tooling)"
     VERBATIM
 )

cmake/XrplSettings.cmake

@@ -32,11 +32,6 @@ endif()
 
 option(benchmark "Build benchmarks" ON)
 
-# When OFF, the crates directory is not added to the build at all: no Rust
-# toolchain is required, no cxxbridge bindings are generated, and the C++ tests
-# that consume those bindings are left out of the build tree.
-option(rust "Build the Rust crates and the C++ code that depends on them" OFF)
-
 # Enabled by default so every header is compiled on its own as the main file of
 # its own compile_commands.json entry - this is what lets clang-tidy (and clangd
 # and IDEs) analyse a header's own includes directly. The per-header objects are

cmake/XrplVersion.cmake

@@ -1,75 +1,15 @@
-find_package(Git)
+#[===================================================================[
+   read version from source
+#]===================================================================]
 
-set(GIT_BUILD_BRANCH "")
-set(GIT_COMMIT_HASH "")
-
-if(DEFINED ENV{GITHUB_BRANCH_NAME})
-    set(GIT_BUILD_BRANCH $ENV{GITHUB_BRANCH_NAME})
-    set(GIT_COMMIT_HASH $ENV{GITHUB_HEAD_SHA})
-elseif(Git_FOUND AND EXISTS "${CMAKE_CURRENT_LIST_DIR}/../.git")
-    execute_process(
-        COMMAND ${GIT_EXECUTABLE} rev-parse --abbrev-ref HEAD
-        WORKING_DIRECTORY ${CMAKE_CURRENT_LIST_DIR}/..
-        OUTPUT_VARIABLE GIT_BUILD_BRANCH
-        OUTPUT_STRIP_TRAILING_WHITESPACE
-        COMMAND_ERROR_IS_FATAL ANY
-    )
-
-    execute_process(
-        COMMAND ${GIT_EXECUTABLE} rev-parse HEAD
-        WORKING_DIRECTORY ${CMAKE_CURRENT_LIST_DIR}/..
-        OUTPUT_VARIABLE GIT_COMMIT_HASH
-        OUTPUT_STRIP_TRAILING_WHITESPACE
-        COMMAND_ERROR_IS_FATAL ANY
-    )
-endif()
-
-message(STATUS "Git branch: ${GIT_BUILD_BRANCH}")
-message(STATUS "Git commit hash: ${GIT_COMMIT_HASH}")
-
-if(
-    DEFINED ENV{FORCE_XRPLD_VERSION}
-    AND NOT "$ENV{FORCE_XRPLD_VERSION}" STREQUAL ""
-)
-    message(
-        STATUS
-        "Using explicitly provided '$ENV{FORCE_XRPLD_VERSION}' as xrpld version"
-    )
-
-    set(XRPLD_VERSION "$ENV{FORCE_XRPLD_VERSION}")
-
-    # The rules beast::SemanticVersion::parse applies, so that an invalid version
-    # fails here rather than when xrpld starts. It reads each number as an int.
-    set(SEMVER_NUMBER "(0|[1-9][0-9]*)")
-    set(SEMVER_PRE_RELEASE "[A-Za-z1-9-][A-Za-z0-9-]*")
-    set(SEMVER_METADATA "[A-Za-z0-9-]+")
-    set(SEMVER_NUMBER_MAX 2147483647)
-    if(
-        NOT XRPLD_VERSION
-            MATCHES
-            "^${SEMVER_NUMBER}\\.${SEMVER_NUMBER}\\.${SEMVER_NUMBER}(-${SEMVER_PRE_RELEASE}(\\.${SEMVER_PRE_RELEASE})*)?(\\+${SEMVER_METADATA}(\\.${SEMVER_METADATA})*)?$"
-        OR CMAKE_MATCH_1 GREATER SEMVER_NUMBER_MAX
-        OR CMAKE_MATCH_2 GREATER SEMVER_NUMBER_MAX
-        OR CMAKE_MATCH_3 GREATER SEMVER_NUMBER_MAX
-    )
-        message(
-            FATAL_ERROR
-            "FORCE_XRPLD_VERSION '${XRPLD_VERSION}' is not a semantic version xrpld accepts, see https://semver.org"
-        )
+file(STRINGS src/libxrpl/protocol/BuildInfo.cpp BUILD_INFO)
+foreach(line_ ${BUILD_INFO})
+    if(line_ MATCHES "versionString[ ]*=[ ]*\"(.+)\"")
+        set(xrpld_version ${CMAKE_MATCH_1})
     endif()
+endforeach()
+if(xrpld_version)
+    message(STATUS "xrpld version: ${xrpld_version}")
 else()
-    message(STATUS "Using '0.0.0-dev+<git short rev>' as xrpld version")
-
-    if(GIT_COMMIT_HASH STREQUAL "")
-        message(
-            FATAL_ERROR
-            "Unable to determine xrpld version without git, set FORCE_XRPLD_VERSION"
-        )
-    endif()
-
-    string(SUBSTRING ${GIT_COMMIT_HASH} 0 7 GIT_COMMIT_HASH_SHORT)
-
-    set(XRPLD_VERSION "0.0.0-dev+${GIT_COMMIT_HASH_SHORT}")
+    message(FATAL_ERROR "unable to determine xrpld version")
 endif()
-
-message(STATUS "Build version: ${XRPLD_VERSION}")

cmake/scripts/codegen/generate_tx_classes.py

@@ -8,7 +8,6 @@ Uses pcpp to preprocess the macro file and pyparsing to parse the DSL.
 
 import io
 import argparse
-import re
 from pathlib import Path
 import pyparsing as pp
 
@@ -54,89 +53,28 @@ def create_transaction_parser():
     return macro_parser
 
 
-# Defaults for xrpl::TxSettings members, mirroring
-# include/xrpl/protocol/TxSettings.h. A transaction's settings blob only names
-# the members that differ from these.
-SETTING_DEFAULTS = {
-    "delegable": "Delegation::NotDelegable",
-    "amendment": "UInt256{}",
-    "privileges": "Privilege::NoPriv",
-}
-
-
-def parse_settings(settings_str):
-    """Parse a TxSettings blob into a dict, filling in defaults.
-
-    Args:
-        settings_str: A string like '({.delegable = Delegation::NotDelegable,
-                      .privileges = Privilege::CreateAcct})', or '({})'.
-
-    Returns:
-        A dict with a value for every key in SETTING_DEFAULTS.
-    """
-    body = settings_str.strip()
-    if not (body.startswith("(") and body.endswith(")")):
-        raise ValueError(
-            f"Malformed settings blob, expected '({{...}})': {settings_str!r}"
-        )
-    body = body[1:-1].strip()
-    if not (body.startswith("{") and body.endswith("}")):
-        raise ValueError(
-            f"Malformed settings blob, expected '({{...}})': {settings_str!r}"
-        )
-    body = body[1:-1]
-
-    # Strip comments, which may be interleaved with the designated initializers.
-    body = re.sub(r"//[^\n]*", "", body)
-
-    settings = dict(SETTING_DEFAULTS)
-    seen = set()
-    # Each entry runs from '.key =' up to the next '.key =' or the end.
-    for key, value in re.findall(
-        r"\.(\w+)\s*=\s*(.*?)(?=,\s*\.\w+\s*=|,?\s*$)", body, re.S
-    ):
-        if key not in SETTING_DEFAULTS:
-            raise ValueError(f"Unknown TxSettings member '.{key}' in {settings_str!r}")
-        settings[key] = " ".join(value.split()).rstrip(",")
-        seen.add(key)
-
-    # Catch a typo'd or unparsed initializer rather than silently defaulting it.
-    # Every '.member' in the blob must have been consumed above.
-    if len(re.findall(r"\.\w+", body)) != len(seen):
-        raise ValueError(f"Could not parse every setting in {settings_str!r}")
-
-    # A blob with content but no designated initializer is positional, which
-    # would otherwise be read as "all defaults" and silently generate the
-    # wrong output.
-    if body.strip() and not seen:
-        raise ValueError(
-            "TxSettings requires designated initializers (.member = value), "
-            f"got {settings_str!r}"
-        )
-
-    return settings
-
-
 def parse_transaction_args(args_list):
     """Parse the arguments of a TRANSACTION macro call.
 
     Args:
         args_list: A list of parsed arguments from pyparsing, e.g.,
-                   ['ttPAYMENT', '0', 'Payment',
-                    '({.privileges = Privilege::CreateAcct})', '({...})']
+                   ['ttPAYMENT', '0', 'Payment', 'Delegation::delegable',
+                    'uint256{}', 'createAcct', '({...})']
 
     Returns:
         A dict with parsed transaction information.
     """
-    if len(args_list) < 5:
+    if len(args_list) < 7:
         raise ValueError(
-            f"Expected at least 5 parts in TRANSACTION, got {len(args_list)}: {args_list}"
+            f"Expected at least 7 parts in TRANSACTION, got {len(args_list)}: {args_list}"
         )
 
     tag = args_list[0]
     value = args_list[1]
     name = args_list[2]
-    settings = parse_settings(args_list[3])
+    delegable = args_list[3]
+    amendments = args_list[4]
+    privileges = args_list[5]
     fields_str = args_list[-1]
 
     # Parse fields: ({field1, field2, ...})
@@ -146,9 +84,9 @@ def parse_transaction_args(args_list):
         "tag": tag,
         "value": value,
         "name": name,
-        "delegable": settings["delegable"],
-        "amendments": settings["amendment"],
-        "privileges": settings["privileges"],
+        "delegable": delegable,
+        "amendments": amendments,
+        "privileges": privileges,
         "fields": fields,
     }
 

cmake/scripts/codegen/templates/LedgerEntry.h.mako

@@ -2,6 +2,9 @@
 #pragma once
 
 #include <xrpl/protocol/STLedgerEntry.h>
+% if any(field.get('stiSuffix') == 'NUMBER' for field in fields):
+#include <xrpl/protocol/STNumber.h>  // IWYU pragma: keep
+% endif
 #include <xrpl/protocol/STParsedJSON.h>
 #include <xrpl/protocol/jss.h>
 #include <xrpl/protocol_autogen/LedgerEntryBase.h>
@@ -209,7 +212,7 @@ ${field['typeData']['setter_type']} ${field['paramName']}${',' if i < len(requir
      * @return The constructed ledger entry wrapper.
      */
     ${name}
-    build(UInt256 const& index)
+    build(uint256 const& index)
     {
         return ${name}{std::make_shared<SLE>(std::move(object_), index)};
     }

cmake/scripts/codegen/templates/LedgerEntryTests.cpp.mako

@@ -31,7 +31,7 @@ namespace xrpl::ledger_entries {
 // builder's STObject and the wrapper's SLE.
 TEST(${name}Tests, BuilderSettersRoundTrip)
 {
-    UInt256 const index{1u};
+    uint256 const index{1u};
 
 % for field in fields:
     auto const ${field["paramName"]}Value = ${canonical_expr(field)};
@@ -85,7 +85,7 @@ TEST(${name}Tests, BuilderSettersRoundTrip)
 // from that SLE, build a new wrapper, and verify all fields (and validate()).
 TEST(${name}Tests, BuilderFromSleRoundTrip)
 {
-    UInt256 const index{2u};
+    uint256 const index{2u};
 
 % for field in fields:
     auto const ${field["paramName"]}Value = ${canonical_expr(field)};
@@ -146,7 +146,7 @@ TEST(${name}Tests, BuilderFromSleRoundTrip)
 // 3) Verify wrapper throws when constructed from wrong ledger entry type.
 TEST(${name}Tests, WrapperThrowsOnWrongEntryType)
 {
-    UInt256 const index{3u};
+    uint256 const index{3u};
 
     // Build a valid ledger entry of a different type
     // Ticket requires: Account, OwnerNode, TicketSequence, PreviousTxnID, PreviousTxnLgrSeq
@@ -177,7 +177,7 @@ TEST(${name}Tests, WrapperThrowsOnWrongEntryType)
 // 4) Verify builder throws when constructed from wrong ledger entry type.
 TEST(${name}Tests, BuilderThrowsOnWrongEntryType)
 {
-    UInt256 const index{4u};
+    uint256 const index{4u};
 
     // Build a valid ledger entry of a different type
 % if wrong_le_include == "Ticket":
@@ -207,7 +207,7 @@ TEST(${name}Tests, BuilderThrowsOnWrongEntryType)
 // 5) Build with only required fields and verify optional fields return nullopt.
 TEST(${name}Tests, OptionalFieldsReturnNullopt)
 {
-    UInt256 const index{3u};
+    uint256 const index{3u};
 
 % for field in required_fields:
     auto const ${field["paramName"]}Value = ${canonical_expr(field)};

conan.lock

@@ -3,7 +3,6 @@
     "requires": [
         "zlib/1.3.2#1cb806da49011867778ffb6ac7190fcb%1782392402.122708",
         "xxhash/0.8.3#681d36a0a6111fc56e5e45ea182c19cc%1782392402.420688",
-        "xrpl-rpc-spec/0.1.19#870b2d3abcfbbf13b61c2d3c69495060%1790348286.187549",
         "sqlite3/3.53.0#324ada52333108388a9a6108bfa96734%1782392403.185447",
         "soci/4.0.3#e726491a03468795453f7c83fc924a96%1782392402.679521",
         "snappy/1.1.10#968fef506ff261592ec30c574d4a7809%1782307151.633168",
@@ -20,11 +19,10 @@
         "libarchive/3.8.7#c446109bd1f1d8ba7936c94189bc50e6%1782392403.066892",
         "jemalloc/5.3.1#1fc58d55316041f10fbc1e8a2eae632a%1776700028.228",
         "gtest/1.17.0#5224b3b3ff3b4ce1133cbdd27d53ee7d%1782392402.791979",
-        "grpc/1.81.1#b87796a4269034856cbc1a2522db16eb%1788275071.530512",
-        "fast_float/8.2.10#f6f28d6bb22112078e7dbda611caf681%1785888854.601666",
+        "grpc/1.81.1#f729f6d75992d20f9c72828e9142d62f%1783945160.094135",
+        "fast_float/8.2.10#f6f28d6bb22112078e7dbda611caf681%1782494504.298",
         "ed25519/2015.03#ae761bdc52730a843f0809bdf6c1b1f6%1782307148.15562",
         "date/3.0.4#862e11e80030356b53c2c38599ceb32b%1782392402.538492",
-        "corrosion/0.6.1#bfa292df0a957bc70a450ff316cd9435%1786119416.131296",
         "c-ares/1.34.6#545240bb1c40e2cacd4362d6b8967650%1782392402.681654",
         "bzip2/1.0.8#c470882369c2d95c5c77e970c0c7e321%1782392402.296732",
         "boost/1.91.0#ea540ca2133d831b560036aa24dece3c%1782392419.475605",
@@ -46,10 +44,6 @@
     ],
     "python_requires": [],
     "overrides": {
-        "boost/1.91.0#ea540ca2133d831b560036aa24dece3c": [
-            null,
-            "boost/1.91.0#ea540ca2133d831b560036aa24dece3c"
-        ],
         "protobuf/[>=5.27.0 <7]": [
             "protobuf/6.33.5"
         ],

conanfile.py

@@ -1,13 +1,9 @@
-import os
 import re
 
 from conan.tools.cmake import CMake, CMakeToolchain, cmake_layout
-from conan.tools.env import Environment
 
 from conan import ConanFile
 
-DEV_VERSION = "0.0.0-dev"
-
 
 class Xrpl(ConanFile):
     name = "xrpl"
@@ -32,7 +28,6 @@ class Xrpl(ConanFile):
     }
 
     requires = [
-        "corrosion/0.6.1",
         "ed25519/2015.03",
         "fast_float/8.2.10",
         "grpc/1.81.1",
@@ -40,7 +35,6 @@ class Xrpl(ConanFile):
         "nudb/2.0.9",
         "openssl/3.6.3",
         "soci/4.0.3",
-        "xrpl-rpc-spec/0.1.19",
         "zlib/1.3.2",
     ]
 
@@ -119,12 +113,17 @@ class Xrpl(ConanFile):
         "soci/*:shared": False,
         "soci/*:with_sqlite3": True,
         "soci/*:with_boost": True,
-        "xrpl-rpc-spec/*:server": "xrpld",
         "xxhash/*:shared": False,
     }
 
     def set_version(self):
-        self.version = self.version or DEV_VERSION
+        if self.version is None:
+            path = f"{self.recipe_folder}/src/libxrpl/protocol/BuildInfo.cpp"
+            regex = r"versionString\s?=\s?\"(.*)\""
+            with open(path, encoding="utf-8") as file:
+                matches = (re.search(regex, line) for line in file)
+                match = next(m for m in matches if m)
+                self.version = match.group(1)
 
     def configure(self):
         if self.settings.compiler == "apple-clang":
@@ -149,7 +148,6 @@ class Xrpl(ConanFile):
         self.requires("xxhash/0.8.3", transitive_headers=True)
 
     exports_sources = (
-        "bin/default-loader-path.sh",
         "CMakeLists.txt",
         "cfg/*",
         "cmake/*",
@@ -167,17 +165,6 @@ class Xrpl(ConanFile):
     generators = "CMakeDeps"
 
     def generate(self):
-        # The sources in the Conan cache have no git history, so the version
-        # comes from the reference, unless it is not one, like 'develop'.
-        if not os.path.exists(os.path.join(self.source_folder, ".git")):
-            version = str(self.version)
-            env = Environment()
-            env.define(
-                "FORCE_XRPLD_VERSION",
-                version if re.match(r"\d+\.\d+\.\d+", version) else DEV_VERSION,
-            )
-            env.vars(self).save_script("xrpld_version")
-
         tc = CMakeToolchain(self)
         tc.variables["tests"] = self.options.tests
         tc.variables["benchmark"] = self.options.benchmark

crates/.cargo/config.toml

@@ -1,17 +0,0 @@
-# The Rust static libraries are linked into C++ targets, so the runtime linkage
-# here has to match what the C++ build uses (see cmake/XrplCompiler.cmake).
-#
-# macOS needs nothing: AppleClang cannot link libgcc/libc++ statically, so the
-# C++ build skips those flags on Apple as well.
-
-# Both amd64 and arm64 Linux builds link libgcc statically. This only affects
-# links that rustc itself drives (`cargo test` binaries and the like) — the
-# `staticlib` crates consumed by CMake are archived, not linked, so rustc
-# silently ignores link args for them. Keeping libgcc_s.so.1 off the xrpld link
-# line is handled in crates/CMakeLists.txt instead.
-[target.'cfg(target_os = "linux")']
-rustflags = ["-C", "link-args=-static-libgcc"]
-
-# Windows builds use the static MSVC runtime.
-[target.'cfg(windows)']
-rustflags = ["-C", "target-feature=+crt-static"]

crates/CMakeLists.txt

@@ -1,104 +0,0 @@
-find_package(Corrosion REQUIRED)
-
-corrosion_import_crate(MANIFEST_PATH ${CMAKE_CURRENT_SOURCE_DIR}/Cargo.toml)
-
-# The generated C++ lands in the build tree, so put a .clang-tidy next to it to
-# keep clang-tidy from analyzing code we don't own.
-configure_file(
-    generated.clang-tidy
-    "${CMAKE_CURRENT_BINARY_DIR}/.clang-tidy"
-    COPYONLY
-)
-
-add_custom_target(xrpl_crates)
-add_dependencies(tidy_prerequisites xrpl_crates)
-
-# On macOS, ld warns `ignoring duplicate libraries` when linking a crate.
-# Corrosion is the source of both duplicates it names:
-#
-# * The crate archive and its cxxbridge archive, because
-#   `corrosion_add_cxxbridge` makes the two depend on each other, and CMake
-#   repeats a static library cycle on the link line so single-pass linkers can
-#   resolve it. (LINK_INTERFACE_MULTIPLICITY can only raise that count.)
-# * `-lSystem`, which Corrosion copies from rustc's `native-static-libs` even
-#   though the compiler driver always links libSystem.
-#
-# ld needs neither: it resolves the cycle from one copy of each archive and
-# links libSystem once. So silence the warning rather than rewrite Corrosion's
-# link interface, which the cycle is also part of. The option itself is old —
-# Xcode 15 is only where the warning became the default — and the check below
-# leaves it out on a linker that does not know it.
-if(is_macos)
-    include(CheckLinkerFlag)
-    check_linker_flag(
-        CXX
-        -Wl,-no_warn_duplicate_libraries
-        have_no_warn_duplicate_libraries
-    )
-endif()
-
-function(_unlink_libgcc_s crate)
-    if(NOT (is_linux AND static))
-        return()
-    endif()
-
-    # Corrosion exposes a crate's staticlib as an imported `<crate>-static`
-    # target and puts the native libs in its INTERFACE_LINK_LIBRARIES. If either
-    # of those changes, warn instead of silently letting libgcc_s.so.1 return.
-    set(imported "${crate}-static")
-    if(NOT TARGET ${imported})
-        message(
-            FATAL_ERROR
-            "Corrosion did not create the imported target '${imported}', so "
-            "libgcc_s cannot be removed from the link interface of '${crate}'. "
-            "xrpld will link libgcc_s.so.1 dynamically. Check where Corrosion "
-            "${CORROSION_VERSION} now records `native-static-libs`."
-        )
-        return()
-    endif()
-
-    get_target_property(libs ${imported} INTERFACE_LINK_LIBRARIES)
-    if(NOT "gcc_s" IN_LIST libs)
-        message(
-            WARNING
-            "'gcc_s' was not in the link interface of '${imported}' as "
-            "expected. If the Rust toolchain stopped reporting it this "
-            "workaround is obsolete and can be deleted; otherwise xrpld may "
-            "link libgcc_s.so.1 dynamically. Verify with: "
-            "objdump -p xrpld | grep NEEDED"
-        )
-        return()
-    endif()
-
-    list(REMOVE_ITEM libs gcc_s)
-    set_property(TARGET ${imported} PROPERTY INTERFACE_LINK_LIBRARIES ${libs})
-endfunction()
-
-function(add_xrpl_crate name)
-    cmake_parse_arguments(ARG "" "CRATE" "FILES" ${ARGN})
-    _unlink_libgcc_s(${ARG_CRATE})
-    # `cc` picks its runtime flag from `crt-static` alone, so it compiles a
-    # crate's C++ with `-MT`; Debug needs `-MTd` (to match cmake/XrplCompiler.cmake).
-    if(is_msvc)
-        corrosion_set_env_vars(
-            ${ARG_CRATE}
-            "$<$<CONFIG:Debug>:CXXFLAGS=-MTd>"
-        )
-    endif()
-    corrosion_add_cxxbridge(${name}_cxxbridge CRATE ${ARG_CRATE} FILES
-                            ${ARG_FILES}
-    )
-    # Generated cxxbridge headers don't exist at configure time; CMake 3.28+
-    # validates INTERFACE_SOURCES on consuming targets. Clear it to skip the
-    # existence check — build-time ordering is enforced by the custom commands.
-    set_target_properties(${name}_cxxbridge PROPERTIES INTERFACE_SOURCES "")
-    if(have_no_warn_duplicate_libraries)
-        target_link_options(
-            ${name}_cxxbridge
-            INTERFACE -Wl,-no_warn_duplicate_libraries
-        )
-    endif()
-    add_dependencies(xrpl_crates ${name}_cxxbridge)
-endfunction()
-
-add_xrpl_crate(rs_hello_world CRATE rs_hello_world FILES lib.rs)

crates/Cargo.lock

@@ -1,301 +0,0 @@
-# This file is automatically @generated by Cargo.
-# It is not intended for manual editing.
-version = 4
-
-[[package]]
-name = "anstyle"
-version = "1.0.14"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "940b3a0ca603d1eade50a4846a2afffd5ef57a9feac2c0e2ec2e14f9ead76000"
-
-[[package]]
-name = "cc"
-version = "1.2.61"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "d16d90359e986641506914ba71350897565610e87ce0ad9e6f28569db3dd5c6d"
-dependencies = [
- "find-msvc-tools",
- "shlex",
-]
-
-[[package]]
-name = "clap"
-version = "4.6.1"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "1ddb117e43bbf7dacf0a4190fef4d345b9bad68dfc649cb349e7d17d28428e51"
-dependencies = [
- "clap_builder",
-]
-
-[[package]]
-name = "clap_builder"
-version = "4.6.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "714a53001bf66416adb0e2ef5ac857140e7dc3a0c48fb28b2f10762fc4b5069f"
-dependencies = [
- "anstyle",
- "clap_lex",
- "strsim",
-]
-
-[[package]]
-name = "clap_lex"
-version = "1.1.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "c8d4a3bb8b1e0c1050499d1815f5ab16d04f0959b233085fb31653fbfc9d98f9"
-
-[[package]]
-name = "codespan-reporting"
-version = "0.13.1"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "af491d569909a7e4dee0ad7db7f5341fef5c614d5b8ec8cf765732aba3cff681"
-dependencies = [
- "serde",
- "termcolor",
- "unicode-width",
-]
-
-[[package]]
-name = "cxx"
-version = "1.0.202"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "13f6de320895f42e6e081abb5c7983bedcf0b6d0ff9323de0d33f620c8ac1199"
-dependencies = [
- "cc",
- "cxx-build",
- "cxxbridge-cmd",
- "cxxbridge-flags",
- "cxxbridge-macro",
- "foldhash",
- "link-cplusplus",
-]
-
-[[package]]
-name = "cxx-build"
-version = "1.0.202"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "4fde53ca86b9704a943fef0f1e1d836239a6aedca5de3c65fa9f97ec0bd46d39"
-dependencies = [
- "cc",
- "codespan-reporting",
- "indexmap",
- "proc-macro2",
- "quote",
- "scratch",
- "syn 3.0.3",
-]
-
-[[package]]
-name = "cxxbridge-cmd"
-version = "1.0.202"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "07bae89236c811fd4d08ed3441759ac4ac98d752cbfd3de341315ba16ad20ec3"
-dependencies = [
- "clap",
- "codespan-reporting",
- "indexmap",
- "proc-macro2",
- "quote",
- "syn 3.0.3",
-]
-
-[[package]]
-name = "cxxbridge-flags"
-version = "1.0.202"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "49045042e5fced01b80742aba5508de82aa4f13677ed3fa2b4cda709c40c5918"
-
-[[package]]
-name = "cxxbridge-macro"
-version = "1.0.202"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "b181252e2e3d3b5d183afbdc033a3958b445eb3e1a0ae65fc3d4f5259f5da6fd"
-dependencies = [
- "indexmap",
- "proc-macro2",
- "quote",
- "syn 3.0.3",
-]
-
-[[package]]
-name = "equivalent"
-version = "1.0.2"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "877a4ace8713b0bcf2a4e7eec82529c029f1d0619886d18145fea96c3ffe5c0f"
-
-[[package]]
-name = "find-msvc-tools"
-version = "0.1.9"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "5baebc0774151f905a1a2cc41989300b1e6fbb29aff0ceffa1064fdd3088d582"
-
-[[package]]
-name = "foldhash"
-version = "0.2.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "77ce24cb58228fbb8aa041425bb1050850ac19177686ea6e0f41a70416f56fdb"
-
-[[package]]
-name = "hashbrown"
-version = "0.17.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "4f467dd6dccf739c208452f8014c75c18bb8301b050ad1cfb27153803edb0f51"
-
-[[package]]
-name = "indexmap"
-version = "2.14.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "d466e9454f08e4a911e14806c24e16fba1b4c121d1ea474396f396069cf949d9"
-dependencies = [
- "equivalent",
- "hashbrown",
-]
-
-[[package]]
-name = "link-cplusplus"
-version = "1.0.12"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "7f78c730aaa7d0b9336a299029ea49f9ee53b0ed06e9202e8cb7db9bae7b8c82"
-dependencies = [
- "cc",
-]
-
-[[package]]
-name = "proc-macro2"
-version = "1.0.106"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "8fd00f0bb2e90d81d1044c2b32617f68fcb9fa3bb7640c23e9c748e53fb30934"
-dependencies = [
- "unicode-ident",
-]
-
-[[package]]
-name = "quote"
-version = "1.0.45"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "41f2619966050689382d2b44f664f4bc593e129785a36d6ee376ddf37259b924"
-dependencies = [
- "proc-macro2",
-]
-
-[[package]]
-name = "rs-hello_world"
-version = "0.1.0"
-dependencies = [
- "cxx",
-]
-
-[[package]]
-name = "scratch"
-version = "1.0.9"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "d68f2ec51b097e4c1a75b681a8bec621909b5e91f15bb7b840c4f2f7b01148b2"
-
-[[package]]
-name = "serde"
-version = "1.0.228"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "9a8e94ea7f378bd32cbbd37198a4a91436180c5bb472411e48b5ec2e2124ae9e"
-dependencies = [
- "serde_core",
- "serde_derive",
-]
-
-[[package]]
-name = "serde_core"
-version = "1.0.228"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "41d385c7d4ca58e59fc732af25c3983b67ac852c1a25000afe1175de458b67ad"
-dependencies = [
- "serde_derive",
-]
-
-[[package]]
-name = "serde_derive"
-version = "1.0.228"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "d540f220d3187173da220f885ab66608367b6574e925011a9353e4badda91d79"
-dependencies = [
- "proc-macro2",
- "quote",
- "syn 2.0.117",
-]
-
-[[package]]
-name = "shlex"
-version = "1.3.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "0fda2ff0d084019ba4d7c6f371c95d8fd75ce3524c3cb8fb653a3023f6323e64"
-
-[[package]]
-name = "strsim"
-version = "0.11.1"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "7da8b5736845d9f2fcb837ea5d9e2628564b3b043a70948a3f0b778838c5fb4f"
-
-[[package]]
-name = "syn"
-version = "2.0.117"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "e665b8803e7b1d2a727f4023456bbbbe74da67099c585258af0ad9c5013b9b99"
-dependencies = [
- "proc-macro2",
- "quote",
- "unicode-ident",
-]
-
-[[package]]
-name = "syn"
-version = "3.0.3"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "53e9bae58849f64dfa4f5d5ae372c8341f7305f82a3868709269343628b659a3"
-dependencies = [
- "proc-macro2",
- "quote",
- "unicode-ident",
-]
-
-[[package]]
-name = "termcolor"
-version = "1.4.1"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "06794f8f6c5c898b3275aebefa6b8a1cb24cd2c6c79397ab15774837a0bc5755"
-dependencies = [
- "winapi-util",
-]
-
-[[package]]
-name = "unicode-ident"
-version = "1.0.24"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "e6e4313cd5fcd3dad5cafa179702e2b244f760991f45397d14d4ebf38247da75"
-
-[[package]]
-name = "unicode-width"
-version = "0.2.2"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "b4ac048d71ede7ee76d585517add45da530660ef4390e49b098733c6e897f254"
-
-[[package]]
-name = "winapi-util"
-version = "0.1.11"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "c2a7b1c03c876122aa43f3020e6c3c3ee5c05081c9a00739faf7503aeba10d22"
-dependencies = [
- "windows-sys",
-]
-
-[[package]]
-name = "windows-link"
-version = "0.2.1"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "f0805222e57f7521d6a62e36fa9163bc891acd422f971defe97d64e70d0a4fe5"
-
-[[package]]
-name = "windows-sys"
-version = "0.61.2"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "ae137229bcbd6cdf0f7b80a31df61766145077ddf49416a728b02cb3921ff3fc"
-dependencies = [
- "windows-link",
-]

crates/Cargo.toml

@@ -1,18 +0,0 @@
-[workspace]
-members = ["hello_world"]
-resolver = "3"
-
-[workspace.dependencies]
-cxx = { version = "1.0.198", features = ["c++20"] }
-
-[workspace.package]
-edition = "2024"
-
-[workspace.lints.rust]
-unexpected_cfgs = { level = "warn", check-cfg = [ 'cfg(coverage)', 'cfg(coverage_nightly)' ] }
-
-[profile.release]
-opt-level = 3
-overflow-checks = true
-lto = true
-debug = true

crates/generated.clang-tidy

@@ -1,10 +0,0 @@
----
-# Neutralizes clang-tidy for the corrosion/cxxbridge-generated C++. Copied into
-# the crates build directory by crates/CMakeLists.txt, next to the generated
-# sources, so clang-tidy picks it up instead of the top-level configuration.
-#
-# One check is kept enabled to avoid clang-tidy's "no checks enabled" error.
-Checks: "-*,google-readability-todo"
-WarningsAsErrors: ""
-HeaderFilterRegex: ""
-InheritParentConfig: false

crates/hello_world/Cargo.toml

@@ -1,13 +0,0 @@
-[package]
-name = "rs-hello_world"
-version = "0.1.0"
-edition.workspace = true
-
-[lib]
-crate-type = ["staticlib"]
-
-[dependencies]
-cxx.workspace = true
-
-[lints]
-workspace = true

crates/hello_world/src/lib.rs

@@ -1,23 +0,0 @@
-#![cfg_attr(coverage_nightly, feature(coverage_attribute))]
-
-#[cxx::bridge(namespace = "rs::hello_world")]
-mod ffi {
-    extern "Rust" {
-        fn hello_world() -> String;
-    }
-}
-
-pub fn hello_world() -> String {
-    "hello_world".to_string()
-}
-
-#[cfg(test)]
-#[cfg_attr(coverage_nightly, coverage(off))]
-mod tests {
-    use super::*;
-
-    #[test]
-    fn hello_world_returns_hello_world() {
-        assert_eq!(hello_world(), "hello_world")
-    }
-}

docs/Docker.md

@@ -1,19 +1,5 @@
 # `xrpld` Docker Image
 
-`xrpld` is published to Docker Hub as [`xrplf/xrpld`](https://hub.docker.com/r/xrplf/xrpld):
-the `xrpld` DEB package installed on Ubuntu 26.04, running as the `xrpld` user.
-Each release is tagged with its version, `xrplf/xrpld:<version>`, and
-`xrplf/xrpld:develop` follows the `develop` branch.
-See [`package/README.md`](../package/README.md#docker-images) for how it is built
-and tagged.
-
-```bash
-docker run --detach --name xrpld \
-    --volume xrpld-db:/var/lib/xrpld \
-    --publish 2459:2459 \
-    xrplf/xrpld:develop
-```
-
-The admin ports (5005, 6006 and 50051) listen on `127.0.0.1` in the shipped
-configuration; to reach them from outside the container, mount your own over
-`/etc/xrpld/xrpld.cfg`.
+- Some info relating to Docker containers can be found here: [../Builds/containers](../Builds/containers)
+- Images for building and testing xrpld can be found here: [thejohnfreeman/rippled-docker](https://github.com/thejohnfreeman/rippled-docker/)
+  - These images do not have xrpld. They have all the tools necessary to build xrpld.

docs/build/environment.md

@@ -46,9 +46,6 @@ Besides a compiler, building `xrpld` requires:
 On Linux and macOS, the [Nix development shell](./nix.md) provides all of them
 (see below). On Windows they have to be installed manually.
 
-Building with `-Drust=ON` additionally requires a Rust toolchain, see
-[Rust](#rust). A default build does not, so it is not in the table above.
-
 Once they are in place, verify that everything is installed and runnable with:
 
 ```bash
@@ -124,25 +121,6 @@ manually:
 - [Git for Windows](https://git-scm.com/download/win)
 - Python, Conan, and CMake, at the versions listed in
   [Required tools](#required-tools).
-- a [Rust toolchain](https://rustup.rs) — only needed to build with
-  `-Drust=ON`, see [Rust](#rust)
-
-## Rust
-
-The repository contains a Rust workspace in [`crates/`](../../crates), whose
-crates are exposed to C++ through [cxx](https://cxx.rs) bindings. It is **not**
-part of a default build: the CMake `rust` option is OFF by default, and with it
-off no Rust toolchain is needed. It is only required when configuring with
-`-Drust=ON` (which is what CI does), see [Options](../../BUILD.md#options).
-
-The toolchain (`cargo`, `rustc`) is pinned to the channel in
-[`rust-toolchain.toml`](../../rust-toolchain.toml) at the repository root. If
-you install Rust with [rustup](https://rustup.rs), that file is picked up
-automatically, and `cargo`/`rustc` in the repository will use the pinned
-version.
-
-Everything else the Rust build needs on the CMake side comes from Conan along
-with the rest of the dependencies, so there is nothing further to install.
 
 ## Clang-tidy
 

docs/build/install.md

@@ -1,10 +1,3 @@
-# Installing xrpld 3.3.0 and earlier
-
-> [!IMPORTANT]
-> These instructions apply to xrpld 3.3.0 and earlier, published to
-> repos.ripple.com.
-> For later releases see [install.md](./install.md).
-
 This document contains instructions for installing xrpld.
 The APT package manager is common on Debian-based Linux distributions like
 Ubuntu,
@@ -59,7 +52,7 @@ The default [prefix][1] is typically `/usr/local` on Linux and macOS and
 
 5.  Add the appropriate XRPL repository for your operating system version:
 
-        echo "deb [signed-by=/usr/local/share/keyrings/ripple-key.gpg] https://repos.ripple.com/repos/rippled-deb focal stable" | \
+        echo "deb [signed-by=/usr/local/share/keyrings/ripple-key.gpg] https://repos.ripple.com/repos/xrpld-deb focal stable" | \
             sudo tee -a /etc/apt/sources.list.d/ripple.list
 
     The above example is appropriate for **Ubuntu 20.04 Focal Fossa**. For other operating systems, replace the word `focal` with one of the following:
@@ -113,8 +106,8 @@ The default [prefix][1] is typically `/usr/local` on Linux and macOS and
         enabled=1
         gpgcheck=0
         repo_gpgcheck=1
-        baseurl=https://repos.ripple.com/repos/rippled-rpm/stable/
-        gpgkey=https://repos.ripple.com/repos/rippled-rpm/stable/repodata/repomd.xml.key
+        baseurl=https://repos.ripple.com/repos/xrpld-rpm/stable/
+        gpgkey=https://repos.ripple.com/repos/xrpld-rpm/stable/repodata/repomd.xml.key
         REPOFILE
 
     _Unstable_
@@ -125,8 +118,8 @@ The default [prefix][1] is typically `/usr/local` on Linux and macOS and
         enabled=1
         gpgcheck=0
         repo_gpgcheck=1
-        baseurl=https://repos.ripple.com/repos/rippled-rpm/unstable/
-        gpgkey=https://repos.ripple.com/repos/rippled-rpm/unstable/repodata/repomd.xml.key
+        baseurl=https://repos.ripple.com/repos/xrpld-rpm/unstable/
+        gpgkey=https://repos.ripple.com/repos/xrpld-rpm/unstable/repodata/repomd.xml.key
         REPOFILE
 
     _Nightly_
@@ -137,8 +130,8 @@ The default [prefix][1] is typically `/usr/local` on Linux and macOS and
         enabled=1
         gpgcheck=0
         repo_gpgcheck=1
-        baseurl=https://repos.ripple.com/repos/rippled-rpm/nightly/
-        gpgkey=https://repos.ripple.com/repos/rippled-rpm/nightly/repodata/repomd.xml.key
+        baseurl=https://repos.ripple.com/repos/xrpld-rpm/nightly/
+        gpgkey=https://repos.ripple.com/repos/xrpld-rpm/nightly/repodata/repomd.xml.key
         REPOFILE
 
 2.  Fetch the latest repo updates:

docs/build/nix.md

@@ -7,7 +7,7 @@ This guide explains how to use Nix to set up a reproducible development environm
 ## Benefits of Using Nix
 
 - **Reproducible environment**: Everyone gets the same versions of tools and compilers
-- **Matches CI**: The Linux CI runs in Docker images built from this exact Nix environment, and CI builds some macOS configurations in it as well
+- **Matches CI**: The Linux CI runs in Docker images built from this exact Nix environment
 - **No system pollution**: Dependencies are isolated and don't affect your system packages
 - **Consistent compilers**: The GCC and Clang shells use the same versions as CI
 - **Quick setup**: Get started with a single command
@@ -68,7 +68,7 @@ A compiler can be chosen by providing its name with the `.#` prefix, e.g. `nix d
 
 On Linux, `.#gcc` and `.#clang` provide the exact toolchain CI uses:
 the compiler (pinned in [`nix/packages.nix`](../../nix/packages.nix))
-rebuilt against the pinned custom glibc (see [`nix/linux.nix`](../../nix/linux.nix)).
+rebuilt against the pinned custom glibc (see [`nix/compilers.nix`](../../nix/compilers.nix)).
 Building that toolchain the first time is slow unless it is fetched from a Nix binary cache.
 If you don't need the custom glibc, the Linux-only `.#gcc-plain` and `.#clang-plain`
 give you the stock nixpkgs compilers of the same versions.
@@ -128,12 +128,6 @@ Coverage builds (`-Dcoverage=ON`) work in the `gcc` shell (and `gcc-plain` on Li
 each ships a `gcov` matching its compiler, since Nix's cc-wrapper does not expose one.
 The `clang` shells do not include `llvm-cov`, so use a `gcc` shell for coverage.
 
-Builds of the Rust crates (`-Drust=ON`) also work out of the box: every shell
-provides the Rust toolchain pinned in
-[`rust-toolchain.toml`](../../rust-toolchain.toml) (see
-[Rust](./environment.md#rust)), plus the `cargo-audit`, `cargo-llvm-cov` and
-`cargo-nextest` plugins.
-
 ## Conan configuration
 
 The shell runs [`conan/init.sh`](../../conan/init.sh) on entry, so
@@ -148,80 +142,14 @@ environment — CI runs in Docker images that bundle the dev shell's toolchain (
 `-plain` shells do not match that toolchain's glibc, so binaries from the remote
 are not a reliable match there.
 
-On **macOS**, CI also builds in this Nix environment, in Debug and Release (the
-`macos-arm64-*-nix` configurations — Debug because the profile defaults to it).
-The Nix build resolves to `compiler=clang`, so it gets its own package IDs,
-separate from the Apple Clang ones. The
-[dependency upload](../../.github/workflows/upload-conan-deps.yml) publishes them
-on pushes to `develop` and on manual runs — its nightly run rebuilds everything
-from source but uploads nothing — so once a set has been published `nix develop`
-can reuse it instead of compiling every dependency locally. These configurations
-run outside the reduced pull-request matrix, so label a PR `Full CI build` when it
-touches `flake.lock` or `nix/`.
+On **macOS**, CI builds with Apple Clang, so the remote holds nothing for the Nix
+`clang` toolchain and dependencies are compiled locally. We do not publish
+Nix-built macOS binaries because a Conan package ID records the compiler version
+but not the nixpkgs revision.
 
 To compile everything from source, add `--build '*'` to the `conan install`
 command.
 
-### Why the nixpkgs revision is not part of the package ID
-
-A Conan package ID records the compiler and its major version, but nothing about
-the nixpkgs revision the toolchain came from — and `flake.lock` moves far more
-often than the toolchain meaningfully changes, so folding it in would rebuild
-every dependency on every bump for nothing.
-
-That is safe as long as no cached artifact resolves a `/nix/store` path at run
-time, because store paths change on every update and the old ones disappear with
-`nix-collect-garbage`. With the `clang` toolchain macOS CI and the dev shell use,
-they do not: it links against `/usr/lib/libc++` and `/usr/lib/libSystem`, and
-store paths reach the `.a` files only through debug info, which nothing resolves
-at link or run time.
-
-> [!WARNING]
-> This does not hold for `nix develop .#gcc` on macOS. There is no system
-> libstdc++, so GCC links its own from the store and every binary keeps a
-> `/nix/store` reference. That shell is fine for tooling, but it is not a build
-> configuration CI covers, and no dependency binaries are published for it.
-
-This is checked rather than assumed.
-[`bin/check-nix-store-refs.sh`](../../bin/check-nix-store-refs.sh) takes one file
-or directory and fails if a binary under it resolves a store path at run time.
-CI runs it over the build output and the Conan cache, and again in the upload job
-before anything is published. You can run it yourself:
-
-```bash
-bin/check-nix-store-refs.sh build
-bin/check-nix-store-refs.sh ~/.conan2-nix
-```
-
-It works on Linux too, but asserts something narrower there: the toolchain always
-writes the store into `PT_INTERP` and `RUNPATH`, and CI builds inside an image
-whose store is fixed for its lifetime, so that is fine. Only the binaries
-[`PatchNixBinary.cmake`](../../cmake/PatchNixBinary.cmake) retargets to the
-system loader have to be clean, and those are what CI checks:
-
-```bash
-bin/check-nix-store-refs.sh build/xrpld
-```
-
-### The libresolv stub
-
-This is not hypothetical: `xrpld` used to be caught by it. The c-ares package
-tells the linker to pass `-lresolv`, and nixpkgs keeps `libresolv` out of the
-macOS SDK and ships it as an ordinary store dylib — so every Nix-built `xrpld`
-recorded a `/nix/store/…-libresolv-93/lib/libresolv.9.dylib` load command and
-stopped running once that path was collected. Nothing in the link uses a single
-symbol from it.
-
-Both environments now put a stub on the linker search path
-(`libresolvSystemStub` in [`nix/darwin.nix`](../../nix/darwin.nix)): the
-same library with its install name set to `/usr/lib/libresolv.9.dylib`, which is
-exactly the load command the Apple Clang build records.
-
-Package IDs did not change, so Conan keeps serving anything built before the
-stub landed. If a binary fails to start with `Library not loaded: /nix/store/…`,
-see [that entry](./nix_troubleshooting.md#library-not-loaded-nixstore-from-a-binary-that-used-to-work)
-in the troubleshooting guide.
-
 ## Automatic Activation with direnv
 
 [direnv](https://direnv.net/) or [nix-direnv](https://github.com/nix-community/nix-direnv) can automatically activate the Nix development shell when you enter the repository directory.

docs/build/nix_troubleshooting.md

@@ -131,91 +131,3 @@ once it picks up that rebuild, then re-run the `grep libgit2` check above to
 confirm it reports `1.9.4` or newer.
 
 Until then, prefer the workarounds above.
-
-## `wint_t` / `uint32_t` errors from the Nix libc++ headers
-
-A build that mixes the Nix toolchain with the system SDK fails in libc++ itself,
-with errors that look nothing like your code:
-
-```
-/nix/store/...-libcxx-.../include/c++/v1/cwchar:136:9: error: target of using declaration conflicts with declaration already in scope
-  136 | using ::wint_t _LIBCPP_USING_IF_EXISTS;
-/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/usr/include/sys/_types/_wint_t.h:32:25: note: target of using declaration
-...
-error: use of undeclared identifier 'UINT32_C'
-```
-
-The give-away is the second path: Nix's libc++ headers are being combined with
-the **Xcode Command Line Tools** SDK instead of the Nix one.
-
-### Why it happens
-
-`SDKROOT` and `DEVELOPER_DIR` are what point the toolchain at the Nix SDK, and
-they are not baked into the compiler — a dev shell gets them from the
-`apple-sdk` setup hook. CMake, finding neither, asks `xcrun`, which answers with
-the system SDK. Nix's `libc++` and Apple's headers then declare the same types
-twice.
-
-### Fix
-
-Run the build from inside the dev shell (`nix develop`), or from an environment
-that exports both variables. To confirm which SDK a configured build is using:
-
-```bash
-grep -o '\-isysroot [^ ]*' build/compile_commands.json | sort -u
-```
-
-It should print a `/nix/store/...-apple-sdk-*` path. If it prints
-`/Library/Developer/CommandLineTools/...`, re-configure from within the shell —
-CMake caches the sysroot, so an existing `build/` directory keeps the wrong one.
-
-## `Library not loaded: /nix/store/…` from a binary that used to work
-
-A binary stops starting after a `nix flake update`, or after
-`nix-collect-garbage` removes the paths the previous toolchain used:
-
-```
-dyld[57271]: Library not loaded: /nix/store/…-libresolv-93/lib/libresolv.9.dylib
-```
-
-[`bin/check-nix-store-refs.sh`](../../bin/check-nix-store-refs.sh) finds the same
-thing without having to run anything, and names the file:
-
-```
-$ bin/check-nix-store-refs.sh ~/.conan2-nix
-::error file=/Users/you/.conan2-nix/p/b/c-area24ded30c388c/p/bin/adig::references the Nix store at run time
-/Users/you/.conan2-nix/p/b/c-area24ded30c388c/p/bin/adig
-    /nix/store/p4lp3xq4imd1qzqh08x8vcq2zfhi7rca-libresolv-93/lib/libresolv.9.dylib
-/Users/you/.conan2-nix: checked 135, skipped 2495, 1 with Nix store references.
-```
-
-Conan's cache folders are named after a truncated package name plus a hash, so
-ask Conan which package the offending one belongs to — pass the folder holding
-the hash, not the file itself:
-
-```
-$ conan cache ref ~/.conan2-nix/p/b/c-area24ded30c388c
-c-ares/1.34.6#545240bb1c40e2cacd4362d6b8967650:dab5992496abe6d219defb7986ecbf367615a5e5#…
-```
-
-### Why it happens
-
-The binary records a store path that no longer exists. Nothing we build should:
-see [Prebuilt packages](./nix.md#prebuilt-packages) for why, and
-`libresolvSystemStub` in [`nix/darwin.nix`](../../nix/darwin.nix) for the one
-dependency that needed help to comply.
-
-A Conan package ID does not encode the nixpkgs revision, so a package built
-before that stub existed stays in your local cache and keeps being reused. The
-dev shell is also what tends to produce one: it is a slightly _less_ isolated
-build environment than CI's, because `mkShell` puts every tool's headers and
-libraries on the compiler's search path — which is how c-ares found the Nix
-`libresolv` in the first place.
-
-### Fix
-
-Drop that package and let Conan refetch or rebuild it:
-
-```bash
-conan remove 'c-ares/*'
-```

docs/dust-mechanism.md

@@ -0,0 +1,176 @@
+# Trust-line dust mechanism
+
+Companion document to [`xrpl::DustSplit`](../include/xrpl/ledger/helpers/TokenHelpers.h)
+and the [`xrpl::vault_dust::`](../include/xrpl/ledger/helpers/VaultHelpers.h)
+Vault adopter. Introduced by `featureLendingProtocolV1_1`.
+
+## Why sfDust
+
+An IOU trust line stores its balance in `sfBalance`, an `STAmount`.
+`STAmount` carries ~16 significant digits; `Number` (used throughout
+protocol accounting) carries 19. When a caller mints or debits a value
+that is finer than what `sfBalance` can represent — typical for
+cash-basis Vault operations near a scale-refining decade boundary — the
+sub-quantum remainder is dropped by rounding. Over many operations the
+loss accumulates and drives receivables and available-cash counters
+apart.
+
+`sfDust` is a per-trust-line 19-digit `STNumber` field that holds that
+sub-quantum remainder. The trust line's true holding is the
+**extended balance** `sfBalance + sfDust`. `sfDust` is intentionally
+declared without the `kSmdNeedsAsset` metadata flag: `associateAsset`
+must not truncate it to `sfBalance`'s precision, since its whole
+purpose is to carry value below that precision.
+
+Pre-amendment `sfDust` is `SoeDefault(0)`. The ledger encoding of an
+`ltRIPPLE_STATE` entry is byte-identical to before the amendment on any
+line whose `sfDust` is zero, so activation is a strict extension.
+
+## Two-legged trust-line touch
+
+A `A -> B` IOU payment where `I` issues touches at most two trust
+lines:
+
+- the sender's line `RIPPLE_STATE{A, I}`;
+- the receiver's line `RIPPLE_STATE{B, I}`.
+
+`A` and `B` are the non-issuer parties on their respective lines; `I`
+holds no line of its own for its own currency. Each non-issuer party
+can independently opt into dust semantics on their OWN line by
+attaching a per-leg `DustSplit::LegPolicy` — `sender` for the debit
+leg, `receiver` for the credit leg. A leg without a sub-policy runs the
+classic pre-dust code path byte-identically.
+
+## Modes
+
+`DustSplit::LegPolicy::Mode::Override`
+: Trust-line layer keeps `sfBalance` representable at `overrideScale`
+and parks any sub-quantum remainder in `sfDust`. Previously deferred
+`sfDust` is automatically promoted when the combined `sfDust +
+   credit` clears a whole-quantum boundary — no separate "renormalise"
+step. Callers supply `overrideScale` from their own accounting
+(e.g. the Vault's posterior scale). Bounded scale drift up to one
+decade may linger until the next operation that refines the scale.
+
+`DustSplit::LegPolicy::Mode::Drain` (sender-leg only)
+: Folds ALL of `sfDust` on the sender's line into the outgoing
+transfer, then zeroes `sfDust`. Used for terminal removals where
+the sender is winding down. There is no receiver-side counterpart
+because a receiver has no reservoir to drain.
+
+## Reporting sign convention
+
+Out-fields (`balanceDelta`, `dustDelta`) on `LegPolicy` are reported
+FROM THAT LEG'S NON-ISSUER PARTY'S PERSPECTIVE — party-positive:
+
+- `sender` leg reports SENDER-POSITIVE deltas. A normal send makes the
+  sender's `balanceDelta` negative; a Drain reports `dustDelta ==
+-sfDust_before`.
+- `receiver` leg reports RECEIVER-POSITIVE deltas. A normal receive
+  makes the receiver's `balanceDelta` positive.
+
+This lets a consumer reconcile its own bookkeeping symmetrically:
+reads from `sender->balanceDelta` on a withdrawal/clawback line up in
+sign with reads from `receiver->balanceDelta` on a deposit, without a
+sign flip.
+
+## Contract asserts (debug)
+
+- Drain on the receiver leg is a caller error.
+- Attaching a policy to the issuer side of a direct payment (where one
+  party IS the issuer) is a caller error — the policy must correspond
+  to the non-issuer party's leg.
+- Any non-empty `DustSplit` requires `featureLendingProtocolV1_1`
+  enabled; a policy under an older rules set falls back to `nullptr`
+  and asserts in debug.
+
+## Adding a new consumer
+
+Vault is the sole consumer today (`xrpl::vault_dust::`). Adding a
+sibling adopter (AMM, LoanBroker, …) is purely additive:
+
+1. Add an eligibility gate in a new sibling namespace, analogous to
+   `xrpl::vault_dust::useVaultDust`.
+2. Construct a `DustSplit` in that consumer's transactor helpers,
+   using the scale implied by that consumer's own accounting.
+3. Reconcile the consumer's bookkeeping using the reported deltas.
+
+The trust-line layer needs no per-consumer awareness. Do NOT extend
+`xrpl::vault_dust::` to serve non-Vault consumers.
+
+## Amendment-gate policy
+
+Every code path that reads or writes `sfDust` enforces
+`rules().enabled(featureLendingProtocolV1_1)`:
+
+- write side: `directSendNoFeeIOU` (this is the canonical anchor);
+- read side: `creditBalanceExact`;
+- deletion guard: `removeEmptyHolding`;
+- consumer eligibility: `vault_dust::useVaultDust`.
+
+In normal operation the gate is redundant — the transactor-level
+eligibility predicates already imply the amendment is on — but a
+hypothetical replay/testing path that ever presented a dust-aware
+request under a pre-amendment `rules()` must NOT touch `sfDust`: the
+field would then be neither `SoeDefault(0)` as expected pre-amendment
+nor part of the ledger's canonical encoding. The gate asserts in
+debug and falls back to the pre-dust code path in release.
+
+## `ValidVault` invariant sign-handling
+
+`sfDust` is stored in the trust line's low-account convention (same as
+`sfBalance`) but the vault-facing invariant needs deltas expressed
+from the counterparty's own perspective. The transformation happens in
+`src/libxrpl/tx/invariants/VaultInvariant.cpp` in two symmetric
+steps — get either step wrong and the invariant either accepts an
+underflow it should reject, or spuriously rejects a valid
+scale-refining move.
+
+1. `ValidVault::visitEntry` accumulates
+   `dustDelta = Number{before} - Number{after}` in low-account
+   convention, matching how `balanceDelta.delta` is accumulated. The
+   convention that both dustDelta and delta share the same low/high
+   orientation is load-bearing — the subsequent sign flip
+   (`balanceDelta.dustDelta *= sign`) leaves the pair oriented as
+   "after − before".
+
+2. `ValidVault::deltaAssets` looks up a trust line for a given
+   `AccountID id`. If `id` is the high account, the low-account
+   convention is inverted with `result->delta = -result->delta` and
+   `result->dustDelta = -result->dustDelta`. This has to be done in
+   lockstep on BOTH fields — flipping only one field would silently
+   invert one component of the extended-balance delta and produce
+   over- or under-reporting in the cash-flow parity check.
+
+The withdrawal cash-flow parity check in `finalize` for
+`ttVAULT_WITHDRAW` compares `extendedPseudoDelta = delta + dustDelta`
+against `extendedDestinationDelta = delta + dustDelta`. Both operands
+must be constructed from the same sign-corrected `DeltaInfo`, which
+is why the sign flip in `deltaAssets` covers both fields together.
+
+If a future contributor adds a new field-typed delta or a new
+sign-flipping helper, replicate this two-field lockstep. The end-to-
+end regression coverage for this convention lives in
+`VaultRoundingTrustlineDust_test::testNonTerminalWithdrawAfterDust`
+and `testSenderLegOverrideNonTerminalPromotes`.
+
+## Related tests
+
+- `src/test/app/lending/VaultRoundingTrustlineDust_test.cpp`
+  covers the end-to-end dust behaviour, including the extended-balance
+  invariant path, sender-leg Override reporting on non-terminal
+  withdraw, and end-to-end Drain via defaulted-loan terminal
+  withdrawal. Also pins the deletion guard both directions
+  (`testVaultDeleteRequiresZeroDust` +
+  `testRemoveEmptyHoldingBlockedByDust`), the nullptr-policy dust
+  preservation contract (`testNullptrPathPreservesExistingDust`),
+  and the golden-byte SoeDefault ledger-encoding compatibility
+  (`testSfDustGoldenByteCompat`).
+- `src/test/app/lending/VaultRounding_test.cpp::testBoundedDust`
+  widens its own test-oracle bound (there is no such bound enforced
+  by `ValidVault` or anywhere else at the ledger level) from one
+  quantum to ten, to allow for the bounded decade-boundary drift
+  documented above.
+- `src/test/app/VaultHelpers_test.cpp::testMoveVaultAssetsWithDust`
+  pins the multi-destination sender-leg-Override + receivers-dust-
+  unaware contract.

docs/install.md

@@ -1,159 +0,0 @@
-# Installing xrpld
-
-> [!NOTE]
-> These instructions apply to packages published from 2026-08-19 onwards.
-> For xrpld 3.3.0 and earlier see [install-legacy.md](./install-legacy.md).
-
-`xrpld` is published as DEB and RPM packages for 64-bit x86 Linux.
-Use APT on Debian-based distributions such as Debian and Ubuntu,
-and DNF on Red Hat-based distributions such as RHEL, AlmaLinux, and Rocky Linux,
-where `yum` is a symlink to `dnf`.
-To build from source instead, see [BUILD.md](../BUILD.md).
-
-## Release channels
-
-Packages are published to four channels:
-
-- `stable` - production releases
-- `rc` - release candidates
-- `beta` - beta builds
-- `develop` - every push to the [`develop` branch](https://github.com/XRPLF/rippled/tree/develop)
-
-See [Publishing packages](../package/README.md#publishing-packages) for how channels are produced.
-
-The instructions below use `stable`.
-To follow another channel, replace `stable` with its name
-wherever it appears in the repository configuration.
-
-> [!WARNING]
-> Channels other than `stable` may be broken at any time.
-> Do not use them for production servers.
-
-## Install the xrpld package
-
-### With the APT package manager
-
-1.  Install utilities:
-
-    ```bash
-    sudo apt update -y
-    sudo apt install -y apt-transport-https ca-certificates curl gnupg
-    ```
-
-2.  Add the XRPL Foundation package-signing key to your list of trusted keys:
-
-    ```bash
-    sudo install -d -m 0755 /etc/apt/keyrings
-    sudo curl -fsS https://packages.xrplf.org/xrplf.asc -o /etc/apt/keyrings/xrplf.asc
-    ```
-
-3.  Check the fingerprint of the newly-added key:
-
-    ```bash
-    gpg --show-keys /etc/apt/keyrings/xrplf.asc
-    ```
-
-    The output should be:
-
-    ```text
-    pub   rsa4096 2026-08-18 [SC]
-          B655416741221F780FBCFBC9AA84D41A11D29FA9
-    uid                      XRPLF Packages <distribution@xrplf.org>
-    ```
-
-    In particular, make sure that the fingerprint matches.
-
-4.  Add the repository, using the channel you picked in [Release channels](#release-channels):
-
-    ```bash
-    echo "deb [signed-by=/etc/apt/keyrings/xrplf.asc] https://packages.xrplf.org/repository/deb-stable any main" | \
-        sudo tee /etc/apt/sources.list.d/xrplf.list
-    ```
-
-5.  Fetch the repository:
-
-    ```bash
-    sudo apt -y update
-    ```
-
-6.  Install the `xrpld` software package:
-
-    ```bash
-    sudo apt -y install xrpld
-    ```
-
-### With the DNF package manager
-
-1.  Add the XRPL Foundation package-signing key:
-
-    ```bash
-    sudo rpm --import https://packages.xrplf.org/xrplf.asc
-    ```
-
-2.  Add the repository, using the channel you picked in [Release channels](#release-channels):
-
-    ```bash
-    cat << 'REPOFILE' | sudo tee /etc/yum.repos.d/xrplf.repo
-    [xrplf-stable]
-    name=XRP Ledger Packages
-    enabled=1
-    baseurl=https://packages.xrplf.org/repository/rpm-stable/$basearch/
-    gpgcheck=1
-    repo_gpgcheck=1
-    gpgkey=https://packages.xrplf.org/xrplf.asc
-    REPOFILE
-    ```
-
-    `gpgcheck=1` verifies each package against the key above.
-    `repo_gpgcheck=1` verifies the repository metadata, which the server signs with the same key.
-
-3.  Install the `xrpld` package:
-
-    ```bash
-    sudo dnf install -y xrpld
-    ```
-
-### Optional: the assert-enabled build
-
-Every channel also carries `xrpld-assert` as a DEB, the same build with assertions
-enabled, for diagnosing a problem on a non-production server.
-It installs the same files as `xrpld` and replaces it, so install one or the other:
-
-```bash
-sudo apt -y install xrpld-assert # APT removes xrpld itself
-```
-
-Switching stops the service, since it is a removal and an installation rather than an upgrade,
-and APT starts it again.
-Install `xrpld` the same way to switch back.
-
-## The xrpld service
-
-Both package managers install a systemd unit and enable it, so `xrpld` starts on boot.
-Check whether it is already running:
-
-```bash
-systemctl status xrpld.service
-```
-
-The DEB packages start it immediately as well; the RPM packages do not, so start it yourself:
-
-```bash
-sudo systemctl start xrpld.service
-```
-
-### Optional: binding to privileged ports
-
-To serve incoming API requests on port 80 or 443, grant the service the capability to bind them.
-You must also update the config file's port settings.
-
-```bash
-sudo install -d -m 0755 /etc/systemd/system/xrpld.service.d
-sudo tee /etc/systemd/system/xrpld.service.d/privileged-ports.conf >/dev/null <<'EOF'
-[Service]
-CapabilityBoundingSet=CAP_NET_BIND_SERVICE
-AmbientCapabilities=CAP_NET_BIND_SERVICE
-EOF
-sudo systemctl daemon-reload
-sudo systemctl restart xrpld.service
-```

flake.lock

@@ -2,11 +2,11 @@
   "nodes": {
     "nixpkgs": {
       "locked": {
-        "lastModified": 1791130267,
-        "narHash": "sha256-1sjwcQMcgAbmiip/VivBSiK8p2bTkQGOvCuO7vnwfx4=",
+        "lastModified": 1781173989,
+        "narHash": "sha256-fnzKKPvS+oieI/pTzotA5tkoM47EB1NpaBcgk4R97hE=",
         "owner": "NixOS",
         "repo": "nixpkgs",
-        "rev": "9013764fcc0ea99fa16cf7aa7decf8a5c3889dd2",
+        "rev": "8c91a71d13451abc40eb9dae8910f972f979852f",
         "type": "github"
       },
       "original": {
@@ -47,11 +47,11 @@
         ]
       },
       "locked": {
-        "lastModified": 1791189933,
-        "narHash": "sha256-Y8eN7ki0Urx4Ojf4w1xSpWg8uk/3lJqK+E0Oth77rH0=",
+        "lastModified": 1784611586,
+        "narHash": "sha256-OfqgY+0hp/zseZB7uyH0U8kIDPS4scZZCyAurEplvG0=",
         "owner": "oxalica",
         "repo": "rust-overlay",
-        "rev": "e60029353d0c48d216bc4b065168ccd4079c166f",
+        "rev": "14f58845249f3552a89b07772626b8d3c632fa86",
         "type": "github"
       },
       "original": {

include/xrpl/basics/.clang-tidy

@@ -1,11 +0,0 @@
-# basics' container adapters (TaggedCache, partitioned_unordered_map,
-# base_uint) model std concepts, which mandate
-# snake_case member type names.
-#
-# clang-tidy replaces rather than merges this option, so the list is the
-# top-level one restated plus the 6 name(s) needed only here:
-#   allocator_type const_pointer const_reverse_iterator hasher key_equal reverse_iterator
-InheritParentConfig: true
-CheckOptions:
-  readability-identifier-naming.TypeAliasIgnoredRegexp: "^(allocator_type|const_iterator|const_pointer|const_reference|const_reverse_iterator|difference_type|duration|hasher|iterator|iterator_category|key_equal|key_type|mapped_type|period|pointer|reference|rep|result_type|reverse_iterator|size_type|time_point|value_type)$"
-  readability-identifier-naming.TypedefIgnoredRegexp: "^(allocator_type|const_iterator|const_pointer|const_reference|const_reverse_iterator|difference_type|duration|hasher|iterator|iterator_category|key_equal|key_type|mapped_type|period|pointer|reference|rep|result_type|reverse_iterator|size_type|time_point|value_type)$"

include/xrpl/basics/CountedObject.h

@@ -1,31 +1,29 @@
 #pragma once
 
-#include <xrpl/beast/utility/instrumentation.h>
+#include <xrpl/beast/type_name.h>
 
-#include <boost/core/type_name.hpp>
-
-#include <algorithm>
 #include <atomic>
-#include <cstddef>
-#include <cstdint>
-#include <iterator>
 #include <string>
-#include <type_traits>
 #include <utility>
+#include <vector>
 
 namespace xrpl {
 
 /**
  * Manages all counted object types.
- *
- * Counters register themselves on a lock-free intrusive list maintained
- * by this object when constructed. Because counters are never destroyed
- * or removed, the ABA problem does not apply.
- *
- * The registry is iterable as a forward range.
  */
 class CountedObjects
 {
+public:
+    static CountedObjects&
+    getInstance() noexcept;
+
+    using Entry = std::pair<std::string, int>;
+    using List = std::vector<Entry>;
+
+    [[nodiscard]] List
+    getCounts(int minimumThreshold) const;
+
 public:
     /**
      * Implementation for @ref CountedObject.
@@ -35,147 +33,68 @@ public:
     class Counter
     {
     public:
-        Counter(std::string name) noexcept;
+        Counter(std::string name) noexcept : name_(std::move(name)), count_(0)
+        {
+            // Insert ourselves at the front of the lock-free linked list
+            CountedObjects& instance = CountedObjects::getInstance();
+            Counter* head = nullptr;
 
-        // Counters are intrusive list nodes whose addresses are published
-        // in the registry; they must never be copied or moved. The atomic
-        // members already force this, but we make it explicit.
-        Counter(Counter const&) = delete;
-        Counter&
-        operator=(Counter const&) = delete;
-        Counter(Counter&&) = delete;
-        Counter&
-        operator=(Counter&&) = delete;
+            do
+            {
+                head = instance.head_.load();
+                next_ = head;
+            } while (instance.head_.exchange(this) != head);
 
-        std::uint32_t
+            ++instance.count_;
+        }
+
+        ~Counter() noexcept = default;
+
+        int
         increment() noexcept
         {
-            auto const newCount = count_.fetch_add(1, std::memory_order::relaxed) + 1;
-            XRPL_ASSERT(newCount != 0, "xrpl::CountedObjects::Counter::increment : no overflow");
-
-            auto maxCount = maxCount_.load(std::memory_order::relaxed);
-
-            while (newCount > maxCount &&
-                   !maxCount_.compare_exchange_weak(maxCount, newCount, std::memory_order::relaxed))
-            {
-            }
-
-            return newCount;
+            return ++count_;
         }
 
-        std::uint32_t
+        int
         decrement() noexcept
         {
-            auto const prev = count_.fetch_sub(1, std::memory_order::relaxed);
-            XRPL_ASSERT(prev != 0, "xrpl::CountedObjects::Counter::decrement : no underflow");
-            return prev - 1;
+            return --count_;
         }
 
-        [[nodiscard]] std::uint32_t
-        count() const noexcept
+        [[nodiscard]] int
+        getCount() const noexcept
         {
-            return count_.load(std::memory_order::relaxed);
+            return count_.load();
         }
 
-        [[nodiscard]] std::uint32_t
-        max() const noexcept
+        [[nodiscard]] Counter*
+        getNext() const noexcept
         {
-            return std::max(
-                count_.load(std::memory_order::relaxed),
-                maxCount_.load(std::memory_order::relaxed));
+            return next_;
         }
 
         [[nodiscard]] std::string const&
-        name() const noexcept
+        getName() const noexcept
         {
             return name_;
         }
 
     private:
-        friend class CountedObjects;
-
-        Counter* next_ = nullptr;
-        std::atomic<std::uint32_t> count_ = 0;
-        std::atomic<std::uint32_t> maxCount_ = 0;
         std::string const name_;
+        std::atomic<int> count_;
+        Counter* next_;
     };
 
-    class Iterator
-    {
-    public:
-        using value_type = Counter const;
-        using reference = value_type&;
-        using pointer = value_type*;
-        using difference_type = std::ptrdiff_t;
-        using iterator_category = std::forward_iterator_tag;
-
-        explicit Iterator(Counter* c = nullptr) noexcept : current_(c)
-        {
-        }
-
-        reference
-        operator*() const noexcept
-        {
-            return *current_;
-        }
-
-        pointer
-        operator->() const noexcept
-        {
-            return current_;
-        }
-
-        Iterator&
-        operator++() noexcept
-        {
-            current_ = current_->next_;
-            return *this;
-        }
-
-        Iterator
-        operator++(int) noexcept
-        {
-            auto tmp = *this;
-            ++*this;
-            return tmp;
-        }
-
-        bool
-        operator==(Iterator const&) const noexcept = default;
-
-    private:
-        Counter* current_;
-    };
-
-    constexpr CountedObjects() noexcept = default;
-
-    [[nodiscard]] auto
-    begin() const noexcept
-    {
-        return Iterator{head_.load(std::memory_order::acquire)};
-    }
-
-    [[nodiscard]] auto
-    end() const noexcept
-    {
-        return Iterator{};
-    }
-
 private:
-    std::atomic<Counter*> head_ = nullptr;
+    CountedObjects() noexcept;
+    ~CountedObjects() noexcept = default;
+
+private:
+    std::atomic<int> count_;
+    std::atomic<Counter*> head_;
 };
 
-/** The global counted object registry. */
-inline constinit CountedObjects gCountedObjects;
-
-inline CountedObjects::Counter::Counter(std::string name) noexcept
-    : next_(gCountedObjects.head_.load(std::memory_order::relaxed)), name_(std::move(name))
-{
-    while (!gCountedObjects.head_.compare_exchange_weak(
-        next_, this, std::memory_order::release, std::memory_order::relaxed))
-        ;
-}
-
 //------------------------------------------------------------------------------
 
 /**
@@ -184,37 +103,27 @@ inline CountedObjects::Counter::Counter(std::string name) noexcept
  * Derived classes have their instances counted automatically. This is used
  * for reporting purposes.
  *
- * The constructors are private and `Object` is befriended so that the
- * CRTP parameter must be the deriving class itself: a copy-paste error
- * like `class B : public CountedObject<A>` fails to compile instead of
- * silently polluting A's count.
- *
- * @note This class has no move operations by design: a derived class's
- *       move constructor falls back to the copy constructor for this
- *       base, so the newly created instance is counted. This keeps the
- *       invariant that count is the number of outstanding subobjects.
- *
- * @warning Counted objects constructed during dynamic initialization of
- *          other translation units may have their increments discarded when
- *          counter itself is dynamically initialized. Do not create counted
- *          objects before main() begins.
- *
  * @ingroup basics
  */
 template <class Object>
-    requires std::is_class_v<Object>
 class CountedObject
 {
-    static inline CountedObjects::Counter counter{boost::core::type_name<Object>()};
+private:
+    static auto&
+    getCounter() noexcept
+    {
+        static CountedObjects::Counter kC{beast::typeName<Object>()};
+        return kC;
+    }
 
     CountedObject() noexcept
     {
-        counter.increment();
+        getCounter().increment();
     }
 
     CountedObject(CountedObject const&) noexcept
     {
-        counter.increment();
+        getCounter().increment();
     }
 
     CountedObject&
@@ -223,7 +132,7 @@ class CountedObject
 public:
     ~CountedObject() noexcept
     {
-        counter.decrement();
+        getCounter().decrement();
     }
 
     friend Object;

include/xrpl/basics/IntrusivePointer.ipp

@@ -618,16 +618,13 @@ SharedWeakUnion<T>::convertToWeak()
             unsafeSetRawPtr(nullptr);
             return true;  // Should never happen
             // LCOV_EXCL_STOP
-        case PartialDestroy: {
-            // We just converted the last strong pointer to a weak pointer.
-            // The weak ref we now hold keeps the object from being fully
-            // destroyed, so `p` stays valid; only the copy passed to
-            // `partialDestructorFinished` is nulled.
+        case PartialDestroy:
+            // This is a weird case. We just converted the last strong
+            // pointer to a weak pointer.
             p->partialDestructor();
-            auto finished = p;
-            partialDestructorFinished(&finished);
+            partialDestructorFinished(&p);
+            // p is null and may no longer be used
             break;
-        }
     }
     unsafeSetRawPtr(p, RefStrength::Weak);
     return true;

include/xrpl/basics/IntrusiveRefCounts.h

@@ -77,13 +77,21 @@ struct IntrusiveRefCounts
     std::size_t
     useCount() const noexcept;
 
-    // MUST be called after `partialDestructor` returns. Another thread may
-    // then delete the object, so `*o` is nulled and must not be used after
-    // (unless the caller holds its own weak ref, e.g.
-    // SharedWeakUnion::convertToWeak). Called by the smart pointers, not
-    // `partialDestructor`, so custom partial destructors can't forget it.
-    // The two-star API signals that `*o` may be deleted. Templated to
-    // support incomplete types.
+    // This function MUST be called after a partial destructor finishes running.
+    // Calling this function may cause other threads to delete the object
+    // pointed to by `o`, so `o` should never be used after calling this
+    // function. The parameter will be set to a `nullptr` after calling this
+    // function to emphasize that it should not be used.
+    // Note: This is intentionally NOT called at the end of `partialDestructor`.
+    // The reason for this is if new classes are written to support this smart
+    // pointer class, they need to write their own `partialDestructor` function
+    // and ensure `partialDestructorFinished` is called at the end. Putting this
+    // call inside the smart pointer class itself is expected to be less error
+    // prone.
+    // Note: The "two-star" programming is intentional. It emphasizes that `o`
+    // may be deleted and the unergonomic API is meant to signal the special
+    // nature of this function call to callers.
+    // Note: This is a template to support incompletely defined classes.
     template <class T>
     friend void
     partialDestructorFinished(T** o);
@@ -326,11 +334,15 @@ IntrusiveRefCounts::addWeakReleaseStrongRef() const
         ReleaseStrongRefAction action = NoOp;
         if (prevVal.strong == 1)
         {
-            // The weak ref added here keeps the weak count non-zero, so
-            // releasing the last strong ref always starts a partial destroy,
-            // regardless of the previous weak count.
-            nextIntVal |= kPartialDestroyStartedMask;
-            action = PartialDestroy;
+            if (prevVal.weak == 0)
+            {
+                action = NoOp;
+            }
+            else
+            {
+                nextIntVal |= kPartialDestroyStartedMask;
+                action = PartialDestroy;
+            }
         }
         if (refCounts_.compare_exchange_weak(prevIntVal, nextIntVal, std::memory_order_acq_rel))
         {
@@ -346,26 +358,24 @@ IntrusiveRefCounts::addWeakReleaseStrongRef() const
 inline ReleaseWeakRefAction
 IntrusiveRefCounts::releaseWeakRef() const
 {
-    auto const prevIntVal = refCounts_.fetch_sub(kWeakDelta, std::memory_order_acq_rel);
-    RefCountPair const prev = prevIntVal;
+    auto prevIntVal = refCounts_.fetch_sub(kWeakDelta, std::memory_order_acq_rel);
+    RefCountPair prev = prevIntVal;
     if (prev.weak == 1 && prev.strong == 0)
     {
-        // `wait` blocks while the value equals its argument, so it must be
-        // given the value as it is after the decrement above.
-        auto curIntVal = prevIntVal - kWeakDelta;
         if (prev.partialDestroyStartedBit == 0u)
         {
             // This case should only be hit if the partialDestroyStartedBit is
             // set non-atomically (and even then very rarely). The code is kept
             // in case we need to set the flag non-atomically for perf reasons.
-            refCounts_.wait(curIntVal, std::memory_order_acquire);
-            curIntVal = refCounts_.load(std::memory_order_acquire);
+            refCounts_.wait(prevIntVal, std::memory_order_acquire);
+            prevIntVal = refCounts_.load(std::memory_order_acquire);
+            prev = RefCountPair{prevIntVal};
         }
-        if (RefCountPair{curIntVal}.partialDestroyFinishedBit == 0u)
+        if (prev.partialDestroyFinishedBit == 0u)
         {
             // partial destroy MUST finish before running a full destroy (when
             // using weak pointers)
-            refCounts_.wait(curIntVal, std::memory_order_acquire);
+            refCounts_.wait(prevIntVal - kWeakDelta, std::memory_order_acquire);
         }
         return ReleaseWeakRefAction::Destroy;
     }

include/xrpl/basics/KeyCache.h

@@ -5,6 +5,6 @@
 
 namespace xrpl {
 
-using KeyCache = TaggedCache<UInt256, int, true>;
+using KeyCache = TaggedCache<uint256, int, true>;
 
 }  // namespace xrpl

include/xrpl/basics/Number.h

@@ -110,10 +110,10 @@ static_assert(
  *
  * However, it does not have sufficient precision to represent the full integer
  * range of int64_t values (-2^63 to 2^63-1), which are needed for XRP and MPT
- * values. The implementation of SingleAssetVault, LendingProtocol, and
- * MPTokensV2 need to represent those integer values accurately and precisely,
- * both for the STNumber field type, and for internal calculations. That
- * necessitated the "large" scale.
+ * values. The implementation of SingleAssetVault, and LendingProtocol need to
+ * represent those integer values accurately and precisely, both for the
+ * STNumber field type, and for internal calculations. That necessitated the
+ * "large" scale.
  *
  * The "Large" scales are intended to represent all values that can be represented
  * by an STAmount - IOUs, XRP, and MPTs. It has a min value of 10^18, and a max
@@ -134,8 +134,8 @@ struct MantissaRange final
     // NOLINTBEGIN(readability-enum-initial-value)
     // The values don't matter, except for Large
     enum class MantissaScale {
-        // Small can be removed when any of featureSingleAssetVault, featureLendingProtocol, or
-        // featureMPTokensV2 are retired
+        // Small can be removed when either featureSingleAssetVault or featureLendingProtocol are
+        // retired
         Small,
         // LargeLegacy can be removed when fixCleanup3_2_0 is retired
         LargeLegacy,
@@ -311,10 +311,10 @@ concept Integral64 = std::is_same_v<T, std::int64_t> || std::is_same_v<T, std::u
  *
  * The mantissa range may be changed at runtime via setMantissaScale(). The
  * default mantissa range is "large". The range is updated whenever transaction
- * processing begins, based on whether SingleAssetVault, LendingProtocol, or
- * MPTokensV2 are enabled. If any is enabled, the mantissa range is set to
- * "large". If not, it is set to "small", preserving backward compatibility and
- * correct "amendment-gating".
+ * processing begins, based on whether SingleAssetVault or LendingProtocol are
+ * enabled. If either is enabled, the mantissa range is set to "large". If not,
+ * it is set to "small", preserving backward compatibility and correct
+ * "amendment-gating".
  *
  * It is extremely unlikely that any more calls to setMantissaScale() will be
  * needed outside of unit tests.
@@ -344,16 +344,16 @@ concept Integral64 = std::is_same_v<T, std::int64_t> || std::is_same_v<T, std::u
  * set/getMantissaScale() functions may be most appropriate. However, if the
  * test has anything to do with transaction processing, it should enable or
  * disable the amendments that control the mantissa range choice
- * (SingleAssetVault, LendingProtocol, and MPTokensV2), and/or check if any of
- * those amendments are enabled to determine which result to expect.
+ * (SingleAssetVault and LendingProtocol), and/or check if either of those
+ * amendments are enabled to determine which result to expect.
  */
 class Number final
 {
     using rep = std::int64_t;
-    using InternalRep = MantissaRange::rep;
+    using internalrep = MantissaRange::rep;
 
     bool negative_{false};
-    InternalRep mantissa_{0};
+    internalrep mantissa_{0};
     int exponent_{std::numeric_limits<int>::lowest()};
 
 public:
@@ -361,10 +361,10 @@ public:
     static constexpr int kMinExponent = -32768;
     static constexpr int kMaxExponent = 32768;
 
-    static constexpr InternalRep kMaxRep = std::numeric_limits<rep>::max();
+    static constexpr internalrep kMaxRep = std::numeric_limits<rep>::max();
     static_assert(kMaxRep == 9'223'372'036'854'775'807);
     static_assert(-kMaxRep == std::numeric_limits<rep>::min() + 1);
-    static constexpr InternalRep kMaxRepUp = ((kMaxRep / 10) + 1) * 10;
+    static constexpr internalrep kMaxRepUp = ((kMaxRep / 10) + 1) * 10;
     static_assert(kMaxRepUp == 9'223'372'036'854'775'810ULL);
 
     // May need to make unchecked private
@@ -388,15 +388,15 @@ public:
     explicit Number(rep mantissa, int exponent);
     explicit constexpr Number(
         bool negative,
-        InternalRep mantissa,
+        internalrep mantissa,
         int exponent,
         Unchecked) noexcept;
     // Assume unsigned values are... unsigned. i.e. positive
-    explicit constexpr Number(InternalRep mantissa, int exponent, Unchecked) noexcept;
+    explicit constexpr Number(internalrep mantissa, int exponent, Unchecked) noexcept;
     // Only unit tests are expected to use this ctor
-    explicit Number(bool negative, InternalRep mantissa, int exponent, Normalized);
+    explicit Number(bool negative, internalrep mantissa, int exponent, Normalized);
     // Assume unsigned values are... unsigned. i.e. positive
-    explicit Number(InternalRep mantissa, int exponent, Normalized);
+    explicit Number(internalrep mantissa, int exponent, Normalized);
 
     [[nodiscard]] constexpr rep
     mantissa() const noexcept;
@@ -558,13 +558,13 @@ public:
     static void
     setMantissaScale(MantissaRange::MantissaScale scale);
 
-    static InternalRep
+    static internalrep
     minMantissa()
     {
         return kRange.get().min;
     }
 
-    static InternalRep
+    static internalrep
     maxMantissa()
     {
         return kRange.get().max;
@@ -591,7 +591,7 @@ public:
     // is negative, returns the positive value. This takes a little extra work
     // because converting std::numeric_limits<std::int64_t>::min() flirts with
     // UB, and can vary across compilers.
-    static InternalRep
+    static internalrep
     externalToInternal(rep mantissa);
 
 private:
@@ -625,8 +625,8 @@ private:
         bool& negative,
         T& mantissa,
         int& exponent,
-        InternalRep const& minMantissa,
-        InternalRep const& maxMantissa,
+        internalrep const& minMantissa,
+        internalrep const& maxMantissa,
         MantissaRange::CuspRoundingFix cuspRoundingFix);
 
     template <class T>
@@ -650,25 +650,25 @@ private:
     shiftExponent(int exponentDelta) const;
 };
 
-constexpr Number::Number(bool negative, InternalRep mantissa, int exponent, Unchecked) noexcept
+constexpr Number::Number(bool negative, internalrep mantissa, int exponent, Unchecked) noexcept
     : negative_(negative), mantissa_{mantissa}, exponent_{exponent}
 {
 }
 
-constexpr Number::Number(InternalRep mantissa, int exponent, Unchecked) noexcept
+constexpr Number::Number(internalrep mantissa, int exponent, Unchecked) noexcept
     : Number(false, mantissa, exponent, Unchecked{})
 {
 }
 
 static constexpr Number kNumZero{};
 
-inline Number::Number(bool negative, InternalRep mantissa, int exponent, Normalized)
+inline Number::Number(bool negative, internalrep mantissa, int exponent, Normalized)
     : Number(negative, mantissa, exponent, Unchecked{})
 {
     normalize(kRange);
 }
 
-inline Number::Number(InternalRep mantissa, int exponent, Normalized)
+inline Number::Number(internalrep mantissa, int exponent, Normalized)
     : Number(false, mantissa, exponent, Normalized{})
 {
 }
@@ -853,7 +853,7 @@ Number::normalizeToRange() const
     static_assert((kMAX + 1) / 10 == kMIN);
 
     bool negative = negative_;
-    InternalRep mantissa = mantissa_;
+    internalrep mantissa = mantissa_;
     int exponent = exponent_;
 
     if constexpr (std::is_unsigned_v<T>)

include/xrpl/basics/README.md

@@ -21,11 +21,11 @@ The module xrpl/basics should contain no dependencies on other modules.
 - `std::set`
   - For sorted containers.
 
-- `xrpl::HashSet`
+- `xrpl::hash_set`
   - Where inserts and contains need to be O(1).
   - For "small" sets, `std::set` might be faster and smaller.
 
-- `xrpl::HardenedHashSet`
+- `xrpl::hardened_hash_set`
   - For data sets where the key could be manipulated by an attacker
     in an attempt to mount an algorithmic complexity attack: see
     http://en.wikipedia.org/wiki/Algorithmic_complexity_attack
@@ -33,5 +33,5 @@ The module xrpl/basics should contain no dependencies on other modules.
 The following container is deprecated
 
 - `std::unordered_set`
-- Use `xrpl::HashSet` instead, which uses a better hashing algorithm.
-- Or use `xrpl::HardenedHashSet` to prevent algorithmic complexity attacks.
+- Use `xrpl::hash_set` instead, which uses a better hashing algorithm.
+- Or use `xrpl::hardened_hash_set` to prevent algorithmic complexity attacks.

include/xrpl/basics/SHAMapHash.h

@@ -14,20 +14,20 @@ namespace xrpl {
 
 class SHAMapHash
 {
-    UInt256 hash_;
+    uint256 hash_;
 
 public:
     SHAMapHash() = default;
-    explicit SHAMapHash(UInt256 const& hash) : hash_(hash)
+    explicit SHAMapHash(uint256 const& hash) : hash_(hash)
     {
     }
 
-    [[nodiscard]] UInt256 const&
+    [[nodiscard]] uint256 const&
     asUInt256() const
     {
         return hash_;
     }
-    UInt256&
+    uint256&
     asUInt256()
     {
         return hash_;

include/xrpl/basics/SlabAllocator.h

@@ -3,11 +3,11 @@
 #pragma once
 
 #include <xrpl/basics/ByteUtilities.h>
+#include <xrpl/beast/type_name.h>
 #include <xrpl/beast/utility/instrumentation.h>
 
 #include <boost/align.hpp>
 #include <boost/container/static_vector.hpp>
-#include <boost/core/type_name.hpp>
 #include <boost/predef.h>
 
 #include <algorithm>
@@ -16,7 +16,6 @@
 #include <cstring>
 #include <mutex>
 #include <stdexcept>
-#include <typeinfo>
 #include <vector>
 
 #if BOOST_OS_LINUX
@@ -336,7 +335,7 @@ public:
                 }) != cfg.end())
         {
             throw std::runtime_error(
-                "SlabAllocatorSet<" + boost::core::type_name<Type>() + ">: duplicate slab size");
+                "SlabAllocatorSet<" + beast::typeName<Type>() + ">: duplicate slab size");
         }
 
         for (auto const& c : cfg)

include/xrpl/basics/StringUtilities.h

@@ -2,6 +2,7 @@
 
 #include <xrpl/basics/Blob.h>
 
+#include <boost/format.hpp>
 #include <boost/utility/string_view.hpp>
 
 #include <array>
@@ -162,89 +163,4 @@ toUInt64(std::string const& s);
 bool
 isProperlyFormedTomlDomain(std::string_view domain);
 
-/**
- * Whether a view can be passed on as a C string.
- *
- * A reader given only data() stops at the first null, so the view must reach the
- * terminating null. The test rebuilds the view from data() and compares: a view
- * that stops earlier rebuilds longer, and so compares unequal.
- *
- * consteval because reading the byte after the view is only defined when @p str
- * points into storage holding a null at or after its end, such as a string
- * literal. An unterminated view is then a compile error, not an out-of-bounds
- * read.
- *
- * @param str The view to test.
- * @return Whether @p str is null-terminated. A view with no data is not.
- */
-consteval bool
-isNullTerminated(std::string_view str)
-{
-    if (str.data() == nullptr)
-        return false;
-
-    // Reading past the view is the point, so the usual data() warning does not
-    // apply.
-    // NOLINTNEXTLINE(bugprone-suspicious-stringview-data-usage)
-    return std::string_view{str.data()} == str;
-}
-
-/**
- * A string that is known to reach its terminating null.
- *
- * Converts to std::string_view, so it compares and hashes as one. Unlike a
- * view, asCString() may be handed to a reader that expects a C string, such
- * as json::StaticString.
- *
- * The only constructor is consteval and rejects a view that stops before the
- * null, so the property holds by construction and no caller asserts it.
- */
-class NullTerminatedView
-{
-public:
-    /**
-     * Build a view from one that reaches its terminating null.
-     *
-     * Explicit, so that a plain view cannot become a proof of termination by
-     * accident. The conversion the other way stays implicit.
-     *
-     * @param view The string to hold. Rejected at compile time if it stops
-     *        before its terminating null, or has no data.
-     */
-    explicit consteval NullTerminatedView(std::string_view view)
-        : data_(view.data()), size_(view.size())
-    {
-        if (!isNullTerminated(view))
-            throw "xrpl::NullTerminatedView : view does not reach a null";
-    }
-
-    constexpr
-    operator std::string_view() const noexcept
-    {
-        return view();
-    }
-
-    /**
-     * @return The string as a view.
-     */
-    [[nodiscard]] constexpr std::string_view
-    view() const noexcept
-    {
-        return {data_, size_};
-    }
-
-    /**
-     * @return The string as a C string. Never null.
-     */
-    [[nodiscard]] constexpr char const*
-    asCString() const noexcept
-    {
-        return data_;
-    }
-
-private:
-    char const* data_;
-    std::size_t size_;
-};
-
 }  // namespace xrpl

include/xrpl/basics/TaggedCache.h

@@ -59,34 +59,34 @@ template <
     class T,
     bool IsKeyCache = false,
     class SharedWeakUnionPointerType = SharedWeakCachePointer<T>,
-    class SharedPointer = std::shared_ptr<T>,
+    class SharedPointerType = std::shared_ptr<T>,
     class Hash = HardenedHash<>,
     class KeyEqual = std::equal_to<Key>,
     class Mutex = std::recursive_mutex>
 class TaggedCache
 {
 public:
-    using MutexType = Mutex;
+    using mutex_type = Mutex;
     using key_type = Key;
     using mapped_type = T;
-    using ClockType = beast::AbstractClock<std::chrono::steady_clock>;
-    using SharedWeakComboPointerType = SharedWeakUnionPointerType;
-    using SharedPointerType = SharedPointer;
+    using clock_type = beast::AbstractClock<std::chrono::steady_clock>;
+    using shared_weak_combo_pointer_type = SharedWeakUnionPointerType;
+    using shared_pointer_type = SharedPointerType;
 
 public:
     TaggedCache(
         std::string const& name,
         int size,
-        ClockType::duration expiration,
-        ClockType& clock,
+        clock_type::duration expiration,
+        clock_type& clock,
         beast::Journal journal,
-        beast::insight::Collector::Ptr const& collector = beast::insight::NullCollector::make());
+        beast::insight::Collector::ptr const& collector = beast::insight::NullCollector::make());
 
 public:
     /**
      * Return the clock associated with the cache.
      */
-    ClockType&
+    clock_type&
     clock();
 
     /**
@@ -239,7 +239,7 @@ public:
     bool
     retrieve(key_type const& key, T& data);
 
-    MutexType&
+    mutex_type&
     peekMutex();
 
     std::vector<key_type>
@@ -265,7 +265,7 @@ public:
 
 private:
     SharedPointerType
-    initialFetch(key_type const& key, std::scoped_lock<MutexType> const& l);
+    initialFetch(key_type const& key, std::scoped_lock<mutex_type> const& l);
 
     void
     collectMetrics();
@@ -277,7 +277,7 @@ private:
         Stats(
             std::string const& prefix,
             Handler const& handler,
-            beast::insight::Collector::Ptr const& collector)
+            beast::insight::Collector::ptr const& collector)
             : hook(collector->makeHook(handler))
             , size(collector->makeGauge(prefix, "size"))
             , hitRate(collector->makeGauge(prefix, "hit_rate"))
@@ -296,14 +296,14 @@ private:
     class KeyOnlyEntry
     {
     public:
-        ClockType::time_point lastAccess;
+        clock_type::time_point lastAccess;
 
-        explicit KeyOnlyEntry(ClockType::time_point const& lastAccess) : lastAccess(lastAccess)
+        explicit KeyOnlyEntry(clock_type::time_point const& lastAccess) : lastAccess(lastAccess)
         {
         }
 
         void
-        touch(ClockType::time_point const& now)
+        touch(clock_type::time_point const& now)
         {
             lastAccess = now;
         }
@@ -312,10 +312,10 @@ private:
     class ValueEntry
     {
     public:
-        SharedWeakComboPointerType ptr;
-        ClockType::time_point lastAccess;
+        shared_weak_combo_pointer_type ptr;
+        clock_type::time_point lastAccess;
 
-        ValueEntry(ClockType::time_point const& lastAccess, SharedPointerType const& ptr)
+        ValueEntry(clock_type::time_point const& lastAccess, shared_pointer_type const& ptr)
             : ptr(ptr), lastAccess(lastAccess)
         {
         }
@@ -343,7 +343,7 @@ private:
             return ptr.lock();
         }
         void
-        touch(ClockType::time_point const& now)
+        touch(clock_type::time_point const& now)
         {
             lastAccess = now;
         }
@@ -351,35 +351,35 @@ private:
 
     using Entry = std::conditional_t<IsKeyCache, KeyOnlyEntry, ValueEntry>;
 
-    using KeyOnlyCacheType = HardenedPartitionedHashMap<key_type, KeyOnlyEntry, Hash, KeyEqual>;
+    using KeyOnlyCacheType = hardened_partitioned_hash_map<key_type, KeyOnlyEntry, Hash, KeyEqual>;
 
-    using KeyValueCacheType = HardenedPartitionedHashMap<key_type, ValueEntry, Hash, KeyEqual>;
+    using KeyValueCacheType = hardened_partitioned_hash_map<key_type, ValueEntry, Hash, KeyEqual>;
 
-    using CacheType = HardenedPartitionedHashMap<key_type, Entry, Hash, KeyEqual>;
+    using cache_type = hardened_partitioned_hash_map<key_type, Entry, Hash, KeyEqual>;
 
     [[nodiscard]] std::thread
     sweepHelper(
-        ClockType::time_point const& whenExpire,
-        [[maybe_unused]] ClockType::time_point const& now,
-        KeyValueCacheType::MapType& partition,
+        clock_type::time_point const& whenExpire,
+        [[maybe_unused]] clock_type::time_point const& now,
+        KeyValueCacheType::map_type& partition,
         SweptPointersVector& stuffToSweep,
         std::atomic<int>& allRemovals,
         std::scoped_lock<std::recursive_mutex> const&);
 
     [[nodiscard]] std::thread
     sweepHelper(
-        ClockType::time_point const& whenExpire,
-        ClockType::time_point const& now,
-        KeyOnlyCacheType::MapType& partition,
+        clock_type::time_point const& whenExpire,
+        clock_type::time_point const& now,
+        KeyOnlyCacheType::map_type& partition,
         SweptPointersVector&,
         std::atomic<int>& allRemovals,
         std::scoped_lock<std::recursive_mutex> const&);
 
     beast::Journal journal_;
-    ClockType& clock_;
+    clock_type& clock_;
     Stats stats_;
 
-    MutexType mutable mutex_;
+    mutex_type mutable mutex_;
 
     // Used for logging
     std::string name_;
@@ -388,11 +388,11 @@ private:
     int const targetSize_;
 
     // Desired maximum cache age
-    ClockType::duration const targetAge_;
+    clock_type::duration const targetAge_;
 
     // Number of items cached
     int cacheCount_{0};
-    CacheType cache_;  // Hold strong reference to recent objects
+    cache_type cache_;  // Hold strong reference to recent objects
     std::uint64_t hits_{0};
     std::uint64_t misses_{0};
 };

include/xrpl/basics/TaggedCache.ipp

@@ -54,10 +54,10 @@ inline TaggedCache<
     TaggedCache(
         std::string const& name,
         int size,
-        ClockType::duration expiration,
-        ClockType& clock,
+        clock_type::duration expiration,
+        clock_type& clock,
         beast::Journal journal,
-        beast::insight::Collector::Ptr const& collector)
+        beast::insight::Collector::ptr const& collector)
     : journal_(journal)
     , clock_(clock)
     , stats_(
@@ -81,7 +81,7 @@ template <
     class Mutex>
 inline auto
 TaggedCache<Key, T, IsKeyCache, SharedWeakUnionPointer, SharedPointerType, Hash, KeyEqual, Mutex>::
-    clock() -> ClockType&
+    clock() -> clock_type&
 {
     return clock_;
 }
@@ -237,8 +237,8 @@ TaggedCache<Key, T, IsKeyCache, SharedWeakUnionPointer, SharedPointerType, Hash,
     // is destroyed but still within the main cache lock.
     std::vector<SweptPointersVector> allStuffToSweep(cache_.partitions());
 
-    ClockType::time_point const now(clock_.now());
-    ClockType::time_point whenExpire;
+    clock_type::time_point const now(clock_.now());
+    clock_type::time_point whenExpire;
 
     auto const start = std::chrono::steady_clock::now();
     {
@@ -252,7 +252,7 @@ TaggedCache<Key, T, IsKeyCache, SharedWeakUnionPointer, SharedPointerType, Hash,
         {
             whenExpire = now - (targetAge_ * targetSize_ / cache_.size());
 
-            ClockType::duration const minimumAge(std::chrono::seconds(1));
+            clock_type::duration const minimumAge(std::chrono::seconds(1));
             if (whenExpire > (now - minimumAge))
                 whenExpire = now - minimumAge;
 
@@ -487,7 +487,7 @@ inline SharedPointerType
 TaggedCache<Key, T, IsKeyCache, SharedWeakUnionPointer, SharedPointerType, Hash, KeyEqual, Mutex>::
     fetch(key_type const& key)
 {
-    std::scoped_lock<MutexType> const l(mutex_);
+    std::scoped_lock<mutex_type> const l(mutex_);
     auto ret = initialFetch(key, l);
     if (!ret)
         ++misses_;
@@ -541,7 +541,7 @@ TaggedCache<Key, T, IsKeyCache, SharedWeakUnionPointer, SharedPointerType, Hash,
     requires IsKeyCache
 {
     std::scoped_lock const lock(mutex_);
-    ClockType::time_point const now(clock_.now());
+    clock_type::time_point const now(clock_.now());
     auto [it, inserted] = cache_.emplace(
         std::piecewise_construct, std::forward_as_tuple(key), std::forward_as_tuple(now));
     if (!inserted)
@@ -583,7 +583,7 @@ template <
     class Mutex>
 inline auto
 TaggedCache<Key, T, IsKeyCache, SharedWeakUnionPointer, SharedPointerType, Hash, KeyEqual, Mutex>::
-    peekMutex() -> MutexType&
+    peekMutex() -> mutex_type&
 {
     return mutex_;
 }
@@ -711,7 +711,7 @@ template <
     class Mutex>
 inline SharedPointerType
 TaggedCache<Key, T, IsKeyCache, SharedWeakUnionPointer, SharedPointerType, Hash, KeyEqual, Mutex>::
-    initialFetch(key_type const& key, std::scoped_lock<MutexType> const& l)
+    initialFetch(key_type const& key, std::scoped_lock<mutex_type> const& l)
 {
     auto cit = cache_.find(key);
     if (cit == cache_.end())
@@ -776,9 +776,9 @@ template <
 inline std::thread
 TaggedCache<Key, T, IsKeyCache, SharedWeakUnionPointer, SharedPointerType, Hash, KeyEqual, Mutex>::
     sweepHelper(
-        ClockType::time_point const& whenExpire,
-        [[maybe_unused]] ClockType::time_point const& now,
-        KeyValueCacheType::MapType& partition,
+        clock_type::time_point const& whenExpire,
+        [[maybe_unused]] clock_type::time_point const& now,
+        KeyValueCacheType::map_type& partition,
         SweptPointersVector& stuffToSweep,
         std::atomic<int>& allRemovals,
         std::scoped_lock<std::recursive_mutex> const&)
@@ -856,9 +856,9 @@ template <
 inline std::thread
 TaggedCache<Key, T, IsKeyCache, SharedWeakUnionPointer, SharedPointerType, Hash, KeyEqual, Mutex>::
     sweepHelper(
-        ClockType::time_point const& whenExpire,
-        ClockType::time_point const& now,
-        KeyOnlyCacheType::MapType& partition,
+        clock_type::time_point const& whenExpire,
+        clock_type::time_point const& now,
+        KeyOnlyCacheType::map_type& partition,
         SweptPointersVector&,
         std::atomic<int>& allRemovals,
         std::scoped_lock<std::recursive_mutex> const&)