The attribute table conflicted because this branch had added the fee and
sequence rows and widened tx_type's set-on list. Kept those, and dropped the
suppressed row the incoming side removed.
The steps described setting a suppressed attribute on a dropped duplicate. The
span is now created after the duplicate check, so there is no span on that path.
The tx.receive span is created after the duplicate check, so it carries no
suppressed attribute and a dropped copy produces no span at all. How many were
dropped is the transactions_duplicate traffic category.
resolveNodePublicKey() returned std::nullopt in three real cases: a first boot
with no wallet database, a standalone run (its wallet is a private temporary
database), and --newnodeid. Telemetry's resources are built during
ApplicationImp's member-init list and are immutable, so on those runs the node
reported an empty service.instance.id and no xrpl.node.id for the whole run,
while setup() minted a key moments later and patched only the tracer.
Replace it with resolveNodeIdentity(), which always returns a keypair: derived
from a configured seed, else read from an existing wallet database, else
minted. Main.cpp passes that pair to makeApplication(), ApplicationImp stores
it in nodeIdentity_ -- now declared before telemetry_ and no longer an optional,
because it is always set -- and builds the telemetry resource from it.
setup() calls getNodeIdentity(), which now persists rather than mints: it
stores the resolved pair when the wallet holds no identity, adopts the stored
one when it does, and clears first for --newnodeid. The write stays in setup()
because that is where the database exists; a standalone run has no persistent
wallet to write to, which is why the pair has to be decided before
construction rather than read back afterwards. Wallet gains storeNodeIdentity()
for that write, and getNodeIdentity(session) now uses it instead of repeating
the insert.
The three-argument makeApplication() mints a keypair, so jtx::Env and any other
test Application behave as a standalone run always did.
Also fold the three hand-rolled "meter from a NoopMeterProvider" copies into
telemetry::noopMeter(): the base-pointer call and the kMeterVersion argument are
both easy to get wrong alone, and the meter identity has to match the one the
histogram views select on.
The new gtest covers the wallet half: store-then-read, store not replacing an
existing identity, clear-then-store, and that the mint path persists. It adds
the tests.libxrpl > xrpl.rdb levelization edge, regenerated here.
Two conflicts, both where this branch's log-pipeline additions sat next to the
upstream spanmetrics -> span_metrics rename: the config header comment, which
this branch extended with a logs line, and the integration test, where the
log-correlation step precedes the span-metrics step. This branch's content is
kept in both and the rename carried into it.
Four conflicts, all where this branch's replacement of the StatsD path with
native OTLP met the upstream spanmetrics -> span_metrics rename. This branch's
design wins in every case; the rename is carried into its text rather than
reverting it, so the connector, its pipeline references, the header comment,
the TESTING.md summary and the runbook all use span_metrics while keeping the
native-OTLP wording.
One addition beyond a straight take-a-side: publish the collector's health
check port. This branch restored the health_check extension and its own
TESTING.md polls http://localhost:13133/ to decide the collector is ready, but
the port was never published on this side of docker-compose.yml, so that check
could not pass from the host. Verified the merged config loads with no
deprecation warnings and that 13133 is published exactly once.
No metric name changed: traces_span_metrics_* already read that way before the
rename, which only ever touched component names and prose.
Conflict in docker/telemetry/otel-collector-config.yaml, in the service
pipelines: this branch renamed the deprecated spanmetrics connector to
span_metrics and adds the statsd metrics pipeline, while upstream renamed the
deprecated otlp exporter to otlp_grpc. Both kept.
With both renames present the collector now starts with no deprecation
warnings at all, which was the point of the pair.
Conflict in docker/telemetry/otel-collector-config.yaml, in the traces
pipeline: this branch added the attributes/hash processor while upstream
renamed the deprecated otlp exporter to otlp_grpc. Both sides kept — the
processor list keeps attributes/hash and the exporter list takes the new name.
Checked that the exporter definition key was renamed to match the reference,
and that the collector still loads the merged config.
The pinned collector warns on every start that "spanmetrics" is a deprecated
alias for "span_metrics". Rename the connector, its pipeline references and
the prose that names it.
The derived metric names are untouched. They come from the connector's
`namespace` setting rather than its component name, so occurrences inside a
metric name such as traces_spanmetrics_calls_total are deliberately left as
they are; renaming those would break every span panel. The rename is applied
only to the bare word, never where it is joined to a metric name by
underscores.
This branch introduces the connector, so the change belongs here.
The pinned collector warns on every start that "otlp" is a deprecated alias
for "otlp_grpc". Rename the trace exporter to otlp_grpc/tempo.
Only the exporter is affected. The otlp RECEIVER keeps its name: it serves
both gRPC and HTTP under one component and is not deprecated, verified by
renaming the exporter alone and seeing the warning stop.
This belongs on this branch because it introduces the exporter, and it is the
last of four deprecated aliases in the collector config; the other three are
owned by later branches in the chain.
Addresses the open review findings on this branch.
The log root was never delivered at all. Docker creates a missing bind-mount
source as root, Config::getDebugLogFile() only warns when it cannot create the
network subdirectory inside it, and Application carries on. The node therefore
looked healthy while writing no debug.log, and Loki stayed empty with no error
at any layer. docker/telemetry/data/logs has in fact been root-owned in a
working checkout since it was first created. A one-shot xrpld-logdir-init
service now creates the directory and hands it to XRPLD_UID/XRPLD_GID,
following the pattern the storage-init service already uses.
Ingested logs carried no node identity, so a multi-node stack collapsed into
one indistinguishable stream while every dashboard filters on
service_instance_id. The receiver now sets include_file_path and lifts the
per-node directory onto the resource attribute service.instance.id, which is
on the allow-list Loki promotes to an indexed stream label. A record attribute
would only become structured metadata and could not be used in a selector.
For that to join anything the directory name has to equal the emitter's
service_instance_id, so the node directories are renamed to match: node$i
becomes Node-$i, and the standalone config writes to logs/xrpld-standalone.
The integration test aborted before reporting. Under set -o pipefail the
grep | head -1 pipeline is killed by SIGPIPE once the log exceeds the pipe
buffer, so the run exited 141 somewhere past a few hundred matching lines and
read as a flaky test. grep -m1 stops on its own. The test also verified the
local file and Tempo but never that a line reached Loki, which is the one hop
this branch adds, so a bounded Loki assertion is added alongside a readiness
wait.
Documentation fixes: the Tempo cross-check counted .data, but Tempo returns
OTLP shape so the array is batches and one trace can span several; the Loki
step used the instant /query endpoint, which rejects a bare log selector with
HTTP 400 and a text/plain body, so jq could never parse it and the step never
printed a number even when ingestion worked. The filelog comment claimed six
fractional digits where the node always emits nine. The two flowcharts used
<br/>, carried no legend, and advertised GetSpan(), which Log.cpp deliberately
avoids in favour of reading the thread-local context directly.
Finally, rename the deprecated collector component names: the pinned
collector warns on every start that otlphttp and filelog are aliases for
otlp_http and file_log. Alloy's otelcol.exporter.otlphttp and
otelcol.receiver.filelog are that product's own component names and are not
deprecated, so they are left alone.
Three conflicts, all resolved by keeping this branch's rewrite and
re-applying the incoming change onto it:
- 09-data-collection-reference.md: phase-7 rewrote both attribute tables,
so the incoming table would have reverted them. Kept phase-7's and
re-applied the two "XRPL epoch" spellings.
- integration-test.sh: phase-7 moved these checks from StatsD to OTel and
no longer defines check_statsd_metric, so only this side compiles.
- TelemetryConfig.cpp: the incoming side carried networkTypeFromId(), which
this branch already has. Kept one definition and took the incoming
doc wording, which the auto-merged body below it already matches.
The rename script rewrites "Ripple epoch" to "XRPL epoch", so the old
spelling in a tracked .md makes the check-rename job fail on a dirty tree.
The attribute keys are left alone: the script's pattern needs a space, and
those keys are a cross-layer contract.
The rename script rewrites "Ripple epoch" to "XRPL epoch", so the old
spelling in a tracked .md makes the check-rename job fail on a dirty tree.
The attribute keys are left alone: the script's pattern needs a space, and
those keys are a cross-layer contract.
The rename script rewrites "Ripple epoch" to "XRPL epoch", so the old
spelling in a tracked .md makes the check-rename job fail on a dirty tree.
The attribute key close_time_ripple_epoch_s is left alone: the script's
pattern needs a space, and that key is a cross-layer contract.
One conflict, in docs/telemetry-runbook.md: both sides had independently
corrected the same consensus_round_id example. This branch kept the pipe form,
which Tempo rejects as a parse error; upstream moved the predicate inside the
braces, which parses and returns data. Upstream's query is kept, with this
branch's note that the value is the previous ledger sequence plus one.
Two conflicts, both additive.
TelemetryConfig.cpp: this branch added requireHttpsEndpoint next to
requireReadableFile; upstream added readConsensusTraceStrategy at the same spot.
Both kept.
05-configuration-reference.md: this branch added the two client-certificate rows
while upstream corrected the consensus strategy value from attribute to random.
Both kept. Also drops the stale "not yet implemented" row for
consensus_trace_strategy, which the merged table now contradicts twice over: the
option is parsed, and its value is no longer spelled attribute.
The plan doc offered `"attribute"` as the alternative to `"deterministic"`
for consensus_trace_strategy. The parser accepts `"random"`; "attribute"
described the correlation mechanism rather than the setting's value. Note
also that the alternative is experimental and not used.
