clang-tidy had been skipped on this branch while CMake configure was
failing, so these findings in makeStageSpan surfaced only now:
- brace the three single-statement if bodies (readability-braces-around-statements)
- compare the pointer parameter explicitly against nullptr
(readability-implicit-bool-conversion)
- include xrpl/protocol/Protocol.h for LedgerIndex (misc-include-cleaner)
A saturated ledgerData lane makes TimeoutCounter re-arm its timer
without running the timer body, so timeouts_ never advances and the
six-timeout give-up can never fire. Acquisitions then neither finish
nor fail until the one-minute sweep destroys their partial maps, and
the work restarts. Every step of that chain was debug-log-only, so a
node at warning level could not be diagnosed after the fact.
The counters are separate on purpose: deferrals rising while timeouts
stay flat is the signature, and no single counter shows it.
Completions are recorded in done() rather than at the "Done: complete"
log line, because that line also fires for failures and misses the
checkLocal and receiveNode paths; done() is the one funnel every
outcome passes through and its signaled_ guard makes it idempotent.
AcquireStats is only forward-declared in ServiceRegistry so libxrpl
still includes nothing from xrpld. The src/ include path for the test
binary moves out of the telemetry guard, since a header-only type
under src/xrpld/ is testable in every build.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The consensus headers moved into the isolated xrpl/consensus module and
took a dependency on xrpl/telemetry for the tracing span constants, but
two things were left behind:
- Four includes still pointed at the old src/xrpld/consensus/ location,
which no longer exists, so the build failed with
"fatal error: 'xrpld/consensus/ConsensusParms.h' file not found".
- xrpl.libxrpl.consensus never linked xrpl.libxrpl.telemetry. add_module
isolates each module's headers, so xrpl/telemetry/SpanNames.h was not
on the include path even once the include was repointed.
Repoint the stale includes at xrpl/consensus/, and declare the telemetry
module before consensus so consensus can link it. Regenerate ordering.txt
for the resulting edge.
NuDB serializes every insert behind one global mutex held for the whole
call, so a caller cannot see how long it waited. Record instead the
writer depth joined at and the wall time spent; with mean depth L and
mean insert time W, Little's Law gives service time W/L and queueing
W - W/L. That distinguishes a serialized write path from a saturated
disk: measured on a dev box the device sat 89 percent idle while
throughput stayed flat at 42k inserts per second.
The accounting runs from a ScopeExit guard because the insert can
allocate and therefore throw; leaking the depth would strand the gauge
above zero for the life of the process.
getWriteLoad also stops returning a hardcoded zero. It now reports
writer depth, which is bounded by the writing-thread count and so stays
far below the kMaxWriteLoadAcquire cutoff that gates history
acquisition, where returning bytes or microseconds would have silently
suppressed it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The phase-2 merge re-added the pre-telemetry `add_module(xrpl tx)` block
without removing it, leaving the module declared twice. CMake's
add_library rejects a repeated target name, so configure failed before
any compilation:
add_library cannot create target "xrpl.libxrpl.tx" because another
target with the same name already exists.
Drop the stale pre-telemetry block and keep the one that follows
add_module(xrpl telemetry), which links both ledger and telemetry.
libxrpl/tx needs the telemetry link for the tx.transactor span, and
levelization already records `libxrpl.tx > xrpl.telemetry`.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
fetchDurationUs_ had no getter, so telemetry reached it by building a JSON
object, stringifying a uint64 and parsing it back with stoll on every
collect tick. storeDurationUs_ was declared and never written or read at
all, along with the jss::node_writes_duration_us key.
Both now have accessors, both production store paths time their backend
call, and the registry reads them without the round trip. get_counts also
reports the write duration, so the RPC and the metric agree. Mean read
latency is the signal that separates a cold store from a warm one: warm
reads are single-digit microseconds, cold ones low hundreds.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Both were uint32_t while every sibling counter was uint64_t. On a
multi-day node node_read_bytes read 1,481,244,491 for 1,894,924,394
reads, i.e. 0.8 bytes per read, which is impossible: the counter had
wrapped about 350 times. Read hit rate is used to tell a cold-read
stall from a write-lock ceiling, so a wrapping numerator makes that
diagnosis wrong rather than merely imprecise.
getFetchTotalCount() was already backed by a uint64_t member, so its
32-bit return type truncated a correct value at the accessor. All
three getters now return uint64_t.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Resolved OpenTelemetryPlan/09-data-collection-reference.md: both sides
document the same new metrics, reached by different routes. The incoming
sections came from the phase-6 edit merged forward; this branch already
documents the same surface in its own layout, with the job lifecycle
metrics and the GetObject request path under the MetricsRegistry
section rather than a separate 2a.
Kept this branch's sections to avoid duplicate entries for every metric.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Resolved OpenTelemetryPlan/09-data-collection-reference.md: this branch
replaced the StatsD-shaped Section 2 with OTel-native naming, so the
incoming StatsD tables and the StatsD per-job timer section do not apply
here. Kept this branch's names throughout.
The incoming per-job-type saturation gauge section is new content and is
retained, renumbered to 2.5 and rewritten for the OTel naming: bare
lowercase `jobq_<jobtype>_{waiting,running,deferred}` derived through
OTelCollector rather than the case-preserving `xrpld_`-prefixed StatsD
form.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Slowness on the peer object-fetch path could be observed but not
attributed. Job duration metrics carry only `job_type`, and both
`RcvGetLedger` and `RcvGetObjByHash` report as `ledgerRequest`, so a
queue-wait spike could not be traced to a handler. Nothing measured
NodeStore cost, request size, or the differential charge.
Latency now decomposes into three additive parts, each separately
measurable:
end-to-end = queue wait + NodeStore lookup + everything else
- `handler` label on job_queued_total/_started_total/_finished_total and
job_queued_us/job_running_us. The value is sanitised: a name passes
through only if non-empty and all ASCII letters, else "other". Two job
names embed a ledger sequence, so a raw label would mint one series
per ledger; the rule bounds the domain at 43 names plus "other".
- getobject_lookup_us, _request_objects, _lookups_total{result},
_rejected_total{reason} and _charge, recorded at their call sites.
All three histograms get explicit bucket views: the SDK default stops
at 10,000, which every one of them exceeds.
- Per-job-type waiting/running/deferred gauges for the 35 non-special
job types. `deferred` is the leading indicator, since addJob never
rejects -- it defers, so backpressure otherwise shows up only as
latency after the fact.
`JobQueue::collect()` snapshots the counters under the queue lock and
publishes gauges after releasing it. Writing them while holding the lock
would invert a lock order against the collector's own lock, which the
collector's flush thread already holds when it calls this hook.
Tests assert exact values, including that the charge is priced on the
requested count rather than the capped iteration count.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Add reference entries for the observability surface introduced on
phase-9: the `handler` label on the job instruments, the five
`getobject_*` request metrics, and the per-job-type queue saturation
gauges.
Names here follow this branch's StatsD pipeline, which preserves case
and carries the `xrpld_` prefix, so they differ from the lowercased
OTel-native names used from phase-7 onward. The sections state where
the implementing code lives, since it is introduced downstream.
Also correct pre-existing entries: `job_count` exports as
`jobq_job_count` via the collector group prefix, the non-special job
type count is 35 (not 36), and `JtLedgerData` has five producers.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Match the panel height the operator settled on in Grafana (18 rows) so
all 20 ranked bars render without an inner scrollbar, and reflow the
Sync Diagnostics row and the panels below it accordingly.
The bar labels on 'Overlay Traffic Heatmap (All Categories, Bytes In)'
were raw metric names carrying a redundant '_bytes_in' suffix, and the
half-width 8-row panel truncated both the category and the node
identity.
- Strip the '_bytes_in' suffix from the derived series label; the panel
title already states the metric is inbound bytes.
- Widen the panel to full width and grow it to 12 rows so 20 bars render
with their full category and node labels.
- Shift the Sync Diagnostics row and the panels below it down by 4 to
keep the layout gap-free.
- Note the label derivation in the panel description.
The panel plotted only Full and Tracking, so the states a node actually
passes through while catching up were invisible. On the dev box's cold
sync the node spent ~19 minutes in Connected and ~3 seconds in Syncing,
while Tracking totalled 2 microseconds -- the one non-Full line the
panel did draw was the least informative of the five.
Add Syncing, Connected and Disconnected series (state-ladder order,
matching the Operating Mode Transitions panel) and rename the panel to
"State Duration Rate (All States)". Because the node is always in
exactly one state, the five rates sum to ~1.0, so the panel now reads as
"which state is time going into right now", and a handover between two
lines marks a state change with its width showing the dwell time.
Description expanded to the full section set (keywords, computation
boundary, references) used by the other panels on this dashboard.
Verified live: rate(state_accounting_connected_duration)/1e6 reaches
1.0 then 0.387 across the catch-up window and syncing reaches 0.0103 --
both previously undrawable.
