Eighteen conflict regions across nine files. Resolved by asking, per
region, which side is the better final state rather than by taking a
branch wholesale.
Telemetry.cpp keeps phase-9's two resource builders. phase-8 offered a
single makeResource() with no node identity; phase-9 splits it into
makeTracerResource() and makeMetricsResource() because the metrics
provider is built in the constructor, before setNodeId() runs, so
xrpl.node.id can only be stamped unconditionally on the tracer side.
Collapsing them would have dropped that attribute, which is what keeps
per-node traces from folding into one identity.
Telemetry.h and the config test compose both sides: phase-9's nodeId
member and its assertion, plus the renamed endpoint.
xrpld-telemetry.cfg keeps phase-9's devnet identity and its
metrics_endpoint, renames the traces key, and drops exporter=otlp_http.
Nothing reads an `exporter` key on any branch in the chain: it was a real
Setup member in the first phase-1b implementation, removed when only
OTLP/HTTP was wired up, and already deleted from TESTING.md once on the
same grounds. The cfg line was the last carrier.
The docs keep phase-9's versions, which are both fuller and more
accurate: the incoming runbook listed the consensus strategy values as
"random" where the code compares against "attribute".
OTelCollector.cpp had five comment-only regions in a file phase-7 owns,
so those take the upstream side.
MetricsRegistry.h's usage example named a member that no longer exists
and the wrong arity; it now matches the real three-argument call and says
where the endpoint comes from.
Ten conflict regions in four files, none of them caused by the rename.
phase-8's own commit had rewritten comments in files phase-7 owns
(Unit.h, HistogramBuckets.h, OTelCollector.cpp) and in Telemetry.cpp,
while the same sweep ran independently on phase-7.
Resolved every region to phase-7's side on ownership grounds: those files
belong to phase-7 or earlier, so a downstream branch should not carry
divergent copies. phase-8 changed comments only in all four, verified
against the merge base, so no code was dropped.
The one structural region: phase-7 had refactored addUnitView from an
inline lambda into a member function, and phase-8 still held the lambda.
Keeping phase-8's would have shadowed the member.
Wording phase-8 had that is worth restoring on phase-7 -- the "legacy"
qualifier on the prefix parameter, and the rejected-alternative note on
the bucket ladders -- is recorded outside the tree for a follow-up.
Three conflicts, all composed rather than resolved by taking a side:
- TelemetryConfig.cpp: phase-6 kept networkTypeFromId file-local with
[[nodiscard]]; phase-7 had relocated it to public scope for
Application.cpp. Kept phase-7's relocation, so one definition remains.
The [[nodiscard]] survives on the declaration in Telemetry.h.
- Telemetry.cpp x2: phase-7 added getMeter overrides, phase-6 added
[[nodiscard]] to the startSpan below them. Kept both, and put
[[nodiscard]] on getMeter too.
- TESTING.md: phase-7 had the right metric name (span_calls_total, which
the spanmetrics namespace produces) but the wrong label. Its
xrpl.rpc.command appears nowhere else in the branch; the attribute is
bare `command`, which is what the dashboards query. Took phase-7's
metric with the correct label.
Both signalEndpoint call sites follow the renamed member. signalEndpoint
itself is left in place: removing it and adding metrics_endpoint is a
design change, not part of propagating a rename.
The rename arrived from phase-1b by merge. Four files still wrote the old
key, which the parser no longer reads, so each would have silently
fallen back to the default collector URL.
integration-test.sh is the load-bearing one: it generates the node config
the test harness starts, so the stale key would have pointed the node at
localhost regardless of the compose network. xrpld-telemetry.cfg is the
standalone node config; the other two document the key.
Note this cfg has a second, divergent variant on the devnet branches that
needs the same fix there.
Harness and docs:
- integration-test.sh queried traces_span_metrics_* for spanmetrics, but this
branch sets the connector namespace to "span", so those two checks matched
nothing and failed. The dashboards and runbook had moved; the script had not.
- The same script queried eight native metric names with a product prefix and
capitals that formatName() cannot produce: it lowercases, maps '.' and ' ' to
'_', and prepends nothing. Corrected against the runbook tables.
- TESTING.md carried the same stale spanmetrics names and a jq example reading
a Prometheus label that does not exist.
- The runbook now records where each part of a derived metric name comes from,
since only the namespace is ours to choose.
Collector:
- OTelCounterImpl::increment silently dropped a negative amount. An OTel
counter takes unsigned deltas, so assert and let a release build under-count
rather than wrap.
- OTelGaugeImpl::increment computed current + amount in int64, which is
undefined on overflow, and the clamp ran afterwards so it could not help.
Check the headroom first. set() now clamps rather than casting a uint64 above
INT64_MAX to a negative, which is what made underflow reachable.
- The meter scope was two bare literals. They are constants now, and
Telemetry.cpp static_asserts them equal to kMeterName and kMeterVersion:
beast cannot include the telemetry header, so a build failure is the only way
to catch the copies drifting.
- formatName uses views::transform and ranges::to, as Backend.cpp already does.
- Unused constructor parameters take [[maybe_unused]] instead of (void) casts.
- The destructor logged "shutting down" and "stopped" with nothing between.
initMetrics was 79 lines doing four jobs. The exporter and the histogram views
are separate functions now, addUnitView is a member rather than a lambda
capturing this, and the export interval and timeout are named. It also derived
the metrics URL from the traces URL by suffix swap, which sent metrics to the
traces path whenever the configured URL had any other shape; both URLs now come
from one rule that handles a bare host, a trailing slash and either signal path.
Review feedback on the testing guide:
- rm -rf targeted data/, but this config writes under docker/telemetry/data/,
so teardown did nothing and a second run reused the old NuDB and SQLite
state. Corrected at both sites, including the Test 2 keygen node, which
launches with the same config.
- The standalone span table said consensus.* does not fire. It does:
ledger_accept drives a simulated round, so consensus.round, .phase.open,
.ledger_close, .accept and .accept.apply all appear. Only .establish,
.update_positions, .check, .proposal.* , .validation.receive and
.mode_change cannot. The test intro claimed the same thing and now agrees
with the table.
- Three blocks duplicated content the file already had. Test 1 now points at
the shared Verification Queries section as Test 2 already did, and the
Test 2 submit block checks engine_result like Test 1 does.
- The numbered step list was a copy of the script's own Step N headers and had
drifted by four entries, so it now points at those headers instead.
Also corrects the runbook's ledger and peer span tables against the code:
ledger.build was credited with tx_count and tx_failed, which tx.apply sets,
and was missing its three close-time attributes; peer.validation.receive was
missing ledger_hash and full_validation. The five source line numbers in those
two tables were stale, so they now name the file only, as the other nineteen
rows do.
Review feedback, plus a sweep of the branch for the same defects elsewhere.
Scope: the ledger.validate guard was a plain local, so it stayed alive until
checkAccept returned and the flag-ledger upgrade check ran inside the measured
span. That check reads every trusted validation of the parent, so one span in
256 became a duration outlier for work unrelated to promoting a ledger. The
span is now scoped to the promotion. tryAdvance stays inside it because it only
sets a flag and posts a job.
Attributes: tx.apply now carries ledger_seq, which the runbook already
documented. The parent ledger.build span has it, but a child cannot be selected
by its parent's attributes, so the span could not be found by ledger.
Guard names: each span guard is now named after the span it holds, so
proposalReceiveSpan, validationReceiveSpan, storeSpan and validateSpan. The
name "span" previously meant the trace root in one inbound-message handler and
the job-queue handle in its sibling, which taught a reader the opposite of the
truth in the next function.
Comments: the StatsD gauge rationale now sits with the initialiser it explains
rather than in the constructor. The peer span header described its trust flags
as shared when they are in fact re-declared to match the consensus keys; the
duplication is intentional and the wording was not.
Docs: the ledger and peer span tables disagreed with the code, crediting
ledger.build with attributes that are set on tx.apply and omitting several that
it does set, and all five source-file line numbers in them were stale. The
testing guide listed attribute keys that exist nowhere in the code, so its
catalog now points at the runbook instead of keeping a second copy that drifts.
Six findings from the review of #6494 survived independent verification.
Each was checked against the branch tip, and where behaviour was in
question, against a live collector and Loki rather than from the
reviewer's claim or from documentation alone.
Plan-doc section numbering. 06-implementation-phases.md used "## 6.9"
twice: for the new Phase 8 section and for the pre-existing Risk
Assessment. Three references already pointed at 6.8.1 and none at 6.9,
and the later phases are numbered 6.8.2 through 6.8.4, so Phase 8
becomes 6.8.1 and the sequence is monotonic. Renumbering to 6.10, as
suggested on the PR, would have collided with Success Metrics.
filelog read position. The receiver relied on the upstream default
start_at=end, which skips everything a node wrote before the first poll
and reads nothing at all from a log that has stopped being written to.
Read from the beginning instead, paired with a file_storage extension so
a restart resumes at the last offset rather than re-ingesting the file.
The collector image runs as 10001:10001 and ships no writable directory,
and a fresh named volume is root-owned, so a one-shot init service
prepares the volume first. It reuses an image the stack already pulls,
adding no new dependency.
Loki log stream label. The job resource attribute did not become a Loki
index label, so the documented {job="xrpld"} queries matched nothing.
Verified against grafana/loki:3.4.2 with its default config: only
service_name and deployment_environment are indexed, and job arrives as
structured metadata, which a stream selector cannot match. Dropped the
attribute and moved the twelve queries this branch introduced to
{service_name="xrpld"}. Three further occurrences in
07-observability-backends.md originate on the phase-1a branch and are
left for a commit there.
Trace ids on unsampled spans. Logs::format emitted trace_id and span_id
whenever the span context was valid. A span dropped by the
ParentBasedSampler still carries its parent's ids, so log lines
advertised traces that were never exported and the log-to-trace link
resolved to nothing. Require the sampled flag as well, and correct the
task list and the documentation that promised the fields unconditionally.
The remaining two findings were refuted. The reported risk of signing
material reaching Loki does not hold: Logs::format already scrubs seven
sensitive fields, and there is a single write path to the log file, so
every JLOG site is covered. The suggestion to add internalLink to the
Loki derived field is not applicable, because that key is not part of
Grafana's schema.
Four files conflicted.
xrpl.proto and TraceContextPropagator.h: phase-9's note is a semantic
superset of phase-8's and already carries no plan-folder pointer, so
phase-9's text is kept and nothing phase-8 said is lost.
node-health.json: the only change phase-8 makes to this file is renaming a
row that phase-9 had already deleted, so phase-9's file stands. Panel count
holds at 59 and both Validated Ledger Seq panels survive.
TESTING.md: resolved per hunk rather than by side. Phase-9's replacement of
the drifted span table and its new Grafana Cloud section are kept, and
phase-8's de-numbered "Test 3: Log-Trace Correlation" heading is taken --
keeping phase-9 wholesale would have reinstated the phase number that
phase-8 removed.
The catalog tagged every span with a rollout phase number defined only in
a planning folder outside the shipped tree, so the column meant nothing
to a reader of the repository. The span name and source file identify
each entry.
These comments and headings identified the feature by a rollout phase
number defined only in a planning folder outside the shipped tree, so the
label meant nothing to a reader of the repository.
Every telemetry build instruction told the reader to run
`cmake --preset default`. No `CMakePresets.json` is tracked in the repo, and the
only preset that exists is `conan-release`, generated into the gitignored
`CMakeUserPresets.json` by `conan install`. So the documented first build step
fails before it starts, in the runbook's quick-start, its disable procedure, and
the telemetry stack's testing guide.
Replaced with the flow BUILD.md actually documents -- `conan install ..
--output-folder .` followed by an explicit `conan_toolchain.cmake` invocation --
with `-o telemetry=True` / `-Dtelemetry=ON` as the telemetry delta, and a note
that `--preset conan-release` works as a shorthand.
The reference docs had drifted from the code in ways that break the reader
rather than merely misinform: PromQL examples that return no data, a rollback
flag that is a no-op, a sampling knob that does not exist, and two span parents
that moved. Code is treated as the truth throughout; where the code is the
defective side, the doc now records it as a known issue instead of describing
the bug as intent.
Renames the docs missed: histogram names gain the exporter's unit suffix
(ios_latency_milliseconds_bucket and four siblings), ledger_history_mismatch
gains _total, the StatsD-era quantile label gives way to le buckets,
rpc.request becomes rpc.http_request, traces_spanmetrics_calls_total becomes
span_calls_total, and the nine dotted xrpl.* span attributes are recorded as
renamed rather than left as live keys.
Re-parenting: consensus.update_positions and consensus.check are children of
consensus.establish, not of consensus.round.
Units and labels: state_accounting_*_duration is microseconds, not seconds;
cache_metrics label values are case-sensitive; object_count carries demangled
C++ type names. Nodestore read and write latency stays microseconds -- the
nanosecond accumulator change did not move the exported unit.
Adds what shipped but was undocumented: the ledger.acquire span, seven
consensus.round events, twelve span attributes, node_writes_duration_us, the
7-day validation-agreement window, the TxQ admission and reduce-relay metric
families, metrics_endpoint, and the phase-10 validation workflow.
Corrects claims that never held: 10% head sampling (it is fixed at 100%),
configurable redaction (it is unconditional), -DXRPL_ENABLE_TELEMETRY=OFF
(the flag is -Dtelemetry=OFF, default ON), FindOpenTelemetry.cmake and the
xrpl_telemetry target (neither exists), Promtail and a StatsD exporter in the
pipeline (neither exists), and Loki stream selection on job= (only
service_name is a stream label).
Phase 9 is marked complete, its provisioned alerting is attributed to the
branch that shipped it, and Phase 11 stays at zero except the one prerequisite
its code closes. Counts are reconciled repo-wide: 41 emitted span families,
15 dashboards on disk with 14 asserted, 13 alert rules in 5 groups.
Hardens the gate that let this drift through: Rule E of the naming check now
covers the reference docs, its allow-dotted marker is key-scoped and warns on
stale or empty use, a missing checked file is reported instead of silently
skipped, the test suite runs in CI, and doc paths trigger the check.
C++ and CMake changes are comment-only: three MetricsRegistry instrument names,
eight OTelCollector claims of a metric-name prefix that formatName never adds,
and the telemetry option's inverted default.
These changes were developed on the phase-10 branch but belong to content this
branch and its upstreams introduced. Carrying them on phase-10 made its PR diff
report churn in files phase-10 does not own, and left each PR claiming a scope
that did not match its contents.
Moved here from phase-10 (identical content, no functional change):
- Dashboards: all 14 existing boards plus the new log-derived-insights board.
- Docs: telemetry-runbook.md (minus the workload/benchmark sections, which
describe phase-10 tooling) and the new telemetry-glossary.md.
- Grafana Cloud + Alloy export path: collector config, compose override, the
two .env examples and alloy/config.alloy.
- Local stack: otel-collector-config.yaml gains sub-millisecond and
second-scale spanmetrics buckets, pins unit=ms, and promotes
close_time_correct; integration-test.sh and TESTING.md follow.
- Node configs: exported_instance -> service_instance_id in comments; the
mainnet sample now logs at warning to bound log volume.
- Metrics code: Telemetry.cpp builds the metrics pipeline in the constructor
via initMetrics() so the global MeterProvider is published before any
subsystem creates a beast::insight instrument, and the histogram view keeps
each instrument's own name instead of collapsing them under one series.
MetricsRegistry gains a last_close_time gauge and skips negative job-queue
durations. OTelCollector drops an unused accessor.
- Naming CI: xrpl_work_item joins EXTERNAL_INFRA_LABELS and Rule E accepts the
dotted perf-iac resource-attribute form. This must travel with the
dashboards and runbook that reference those labels, or the rules fail.
- Doxygen input glob no longer recurses dot-directories.
Sections describing phase-10 tooling stay on phase-10 and keep their
"Future Enhancement" / "Planned, not yet implemented" markers here; phase-10
removes those markers when it lands the tooling.
The collector's log ingestion used a container path named after the old
`rippled` binary and defaulted its host mount to a location that either
needed root or diverged from where the telemetry configs actually write.
Consolidate on one accessible log root:
- container mount target renamed /var/log/rippled -> /var/log/xrpld
- filelog glob -> /var/log/xrpld/*/debug.log
- compose mount source defaults to the repo-relative ./data/logs
(user-owned, no root), overridable via XRPLD_LOG_DIR
- devnet telemetry cfg writes to data/logs/devnet/debug.log so it lands
one subdir below the mount root and matches the glob
- integration-test.sh sets XRPLD_LOG_DIR to its own workdir
- docs/runbook/task-list updated to match
The default xrpld config (cfg/xrpld-example.cfg) is intentionally left
untouched.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Correct log-timestamp examples to real Logs::format() output
(2024-Jan-15 10:30:45.123456 UTC) in docs, TESTING.md, and reference.
- Update Loki to v3.4.2 and switch the collector exporter to
otlphttp/loki on the native /otlp endpoint (docs + task list).
- Make the collector log-mount path configurable via XRPLD_LOG_DIR.
- Remove implementation-phase references from shipped config/script
comments, keeping the functional descriptions.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- 09-data-collection-reference: add $service_name, $deployment_environment,
$xrpl_network_type to the template-variable table; note they appear on all
dashboards and point to the runbook's Deployment Tiers section.
- TESTING.md: add a Prometheus check verifying the tier labels
(deployment_environment, xrpl_network_type, service_name) are present on
metric series.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Head sampling is fixed at 1.0 and not configurable. Drop sampling_ratio
from the docker sample/test configs and the data-collection reference;
rewrite the span-metric sampling caveat and volume guidance to point at
collector-side tail sampling.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Update the docker/telemetry sample config and testing guide to set
trace_peer=1, matching the new on-by-default behavior and the other
trace categories already enabled in these all-categories sample profiles.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Follow-up to the dashboard cleanup on this branch. Caught additional sites
in TESTING.md that still reference the never-emitted `rpc.request` span:
- TraceQL query examples in Step 5 "Verify traces in Tempo" now filter on
`name="rpc.http_request"` (the real emitted name).
- Expected-spans table replaces `rpc.request` with `rpc.http_request`.
- Query loop under the Prometheus verification section now iterates over
the full set of emitted RPC entry-point names
(`rpc.http_request`, `rpc.ws_upgrade`, `rpc.ws_message`, `rpc.process`).
Also drop `exporter=otlp_http` from the sample telemetry config block.
`TelemetryConfig.cpp` does not parse an `exporter` key in any phase through
Phase 8; only OTLP/HTTP is wired up, so the line is either a silently
ignored no-op or misleading documentation.
Phase-6 introduces ledger-operations, peer-network, and the five StatsD
dashboards. Align them with the rest of the chain:
- Rename dashboard UIDs from `rippled-*` to `xrpld-*` so the provisioned
UIDs match the post-rename-script documentation (`docs.sh` rewrites
.md but not .json, so the two drifted). Runbook references
`xrpld-rpc-perf`, `xrpld-transactions`, etc., now the JSON matches.
- Add the `$node` template variable + `exported_instance=~"$node"` filter
to every target in the five `statsd-*` dashboards. Mirrors the pattern
already used by consensus-health, ledger-operations, and peer-network
per the project rule that every dashboard must support per-node
filtering.
- Strip `:<line>` (and `:NN-NN` range) suffixes from C++ file references
in every dashboard panel description and in docker/telemetry/TESTING.md.
Line numbers drift on every refactor; the filename alone is enough to
grep.
- Replace stale `rpc.request` entries with the real emitted span names
(`rpc.http_request`, `rpc.ws_upgrade`, `rpc.ws_message`, `rpc.process`)
in TESTING.md so operators can copy-paste the filters and hit real
traces.
- Also drop the `:706` line ref from the `StatsDCollector.cpp` callout
in `06-implementation-phases.md`.
- Replace GetSpan() with direct context value check in Logs::format()
to avoid heap allocation (new DefaultSpan) on the no-span path
- Restore Phase 7 documentation accidentally deleted during merge
- Fix undefined $JAEGER variable → use $TEMPO in integration test
- Remove useless LCOV_EXCL markers around #ifdef block
- Fix indentation inconsistencies in Log.cpp injection block
- Remove incorrect url field from loki.yaml derivedFields
- Update stale code sample in Phase8_taskList.md to match implementation
- Correct "<10ns" performance claims to accurate ~15-20ns (no-span)
and ~50ns (active-span) measurements across all docs
- Replace Jaeger references with Tempo in TESTING.md (port 16686→3200)
- Improve error handling in check_log_correlation(): track files_scanned,
detect missing log files, fix silent grep error masking
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Integrate the existing StatsD metrics pipeline (beast::insight) into
the OpenTelemetry observability stack and add new trace spans for
ledger build/store/validate and peer proposal/validation receive.
Phase 5b — Ledger, peer, and transaction spans:
- Add ledger.build span with close time attributes in BuildLedger.cpp
- Add tx.apply span with tx_count/tx_failed in BuildLedger.cpp
- Add ledger.store and ledger.validate spans in LedgerMaster.cpp
- Add peer.proposal.receive span with trusted attribute in PeerImp.cpp
- Add peer.validation.receive span with ledger_hash, full, trusted
attributes in PeerImp.cpp
- Add ledger-operations and peer-network Grafana dashboards
Phase 6 — StatsD metrics integration:
- Add StatsD UDP receiver (port 8125) to OTel Collector
- Add 5 StatsD Grafana dashboards: node health, network traffic,
overlay traffic detail, ledger data sync, RPC pathfinding
- Add 09-data-collection-reference.md cataloging all metrics/spans
- Update existing dashboards with new span panels
- Expand telemetry runbook and integration test script
- Add codecov exclusions for telemetry modules
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Run .github/scripts/rename/docs.sh to replace rippled → xrpld
references in TESTING.md, xrpld-telemetry.cfg, and
telemetry-runbook.md, fixing the check-rename CI failure.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
