rippled/docker/telemetry/TESTING.md

OpenTelemetry Integration Testing Guide

This document describes how to verify the xrpld OpenTelemetry telemetry pipeline end-to-end, from span generation through the observability stack (otel-collector, Tempo, Prometheus, Grafana).

---

Prerequisites

Build xrpld with telemetry

Follow BUILD.md with -o telemetry=True added. From a build directory (.build/):

conan install .. --output-folder . --build missing -o telemetry=True --settings build_type=Release
cmake -DCMAKE_TOOLCHAIN_FILE:FILEPATH=build/generators/conan_toolchain.cmake -DCMAKE_BUILD_TYPE=Release -Dxrpld=ON -Dtelemetry=ON ..
cmake --build . --target xrpld

Conan also writes a conan-release preset, so cmake --preset conan-release -Dtelemetry=ON works too. There is no preset named default.

The binary is at .build/xrpld.

Required tools

• Docker with docker compose (v2)
• curl
• jq (JSON processor)

Verify binary

.build/xrpld --version

---

Test 1: Single-Node Standalone (Quick Verification)

This test verifies RPC and transaction spans in standalone mode. Consensus spans will not fire because standalone mode does not run consensus.

Step 1: Start the observability stack

docker compose -f docker/telemetry/docker-compose.yml up -d

Wait for services to be ready:

# otel-collector readiness: any HTTP response on the OTLP/HTTP port means the
# receiver is listening. Do NOT use `curl -sf` here — a GET of / returns 404,
# which -f treats as failure even when the collector is healthy.
[ "$(curl -so /dev/null -w '%{http_code}' http://localhost:4318/)" != "000" ] &&
    echo "collector ready"

# Tempo readiness
curl -sf http://localhost:3200/ready >/dev/null && echo "tempo ready"

The collector's health_check extension listens on 13133, but docker-compose.yml publishes only 4317, 4318 and 8889 — so 13133 is not reachable from the host with the base stack. It is published only by the Phase-10 workload stack (docker-compose.workload.yaml).

Step 2: Start xrpld in standalone mode

.build/xrpld --conf docker/telemetry/xrpld-telemetry.cfg -a --start

Wait a few seconds for the node to initialize.

Step 3: Exercise RPC spans

# server_info
curl -s http://localhost:5005 \
    -d '{"method":"server_info"}' | jq .result.info.server_state

# server_state
curl -s http://localhost:5005 \
    -d '{"method":"server_state"}' | jq .result.state.server_state

# ledger
curl -s http://localhost:5005 \
    -d '{"method":"ledger","params":[{"ledger_index":"current"}]}' |
    jq .result.ledger_current_index

Step 4: Submit a transaction

Close the ledger first (required in standalone mode):

curl -s http://localhost:5005 -d '{"method":"ledger_accept"}'

Submit a Payment from the genesis account:

curl -s http://localhost:5005 -d '{
  "method": "submit",
  "params": [{
    "secret": "snoPBrXtMeMyMHUVTgbuqAfg1SUTb",
    "tx_json": {
      "TransactionType": "Payment",
      "Account": "rHb9CJAWyB4rj91VRWn96DkukG4bwdtyTh",
      "Destination": "rPMh7Pi9ct699iZUTWzJaUMR1o42VEfGqF",
      "Amount": "10000000"
    }
  }]
}' | jq .result.engine_result

Expected result: "tesSUCCESS".

Close the ledger again to finalize:

curl -s http://localhost:5005 -d '{"method":"ledger_accept"}'

Step 5: Verify traces in Tempo

Wait 5 seconds for the batch export, then:

TEMPO="http://localhost:3200"

# Check xrpld service is registered
curl -s "$TEMPO/api/v2/search/tag/resource.service.name/values" | jq '.tagValues[].value'

# Check RPC spans
curl -s "$TEMPO/api/search" \
    --data-urlencode 'q={resource.service.name="xrpld" && name="rpc.http_request"}' \
    --data-urlencode 'limit=5' | jq '.traces | length'

curl -s "$TEMPO/api/search" \
    --data-urlencode 'q={resource.service.name="xrpld" && name="rpc.process"}' \
    --data-urlencode 'limit=5' | jq '.traces | length'

curl -s "$TEMPO/api/search" \
    --data-urlencode 'q={resource.service.name="xrpld" && name="rpc.command.server_info"}' \
    --data-urlencode 'limit=5' | jq '.traces | length'

# Check transaction spans
curl -s "$TEMPO/api/search" \
    --data-urlencode 'q={resource.service.name="xrpld" && name="tx.process"}' \
    --data-urlencode 'limit=5' | jq '.traces | length'

Or open Grafana Explore with Tempo datasource: http://localhost:3000

Step 6: Teardown

# Kill xrpld (Ctrl+C or)
kill $(pgrep -f 'xrpld.*xrpld-telemetry')

# Stop observability stack
docker compose -f docker/telemetry/docker-compose.yml down

# Clean xrpld data
rm -rf data/

Expected spans (standalone mode)

Span Name	Expected	Notes
rpc.http_request	Yes	Every HTTP RPC call
rpc.process	Yes	Every RPC processing
rpc.command.server_info	Yes	server_info RPC
rpc.command.server_state	Yes	server_state RPC
rpc.command.ledger	Yes	ledger RPC
rpc.command.submit	Yes	submit RPC
rpc.command.ledger_accept	Yes	ledger_accept RPC
tx.process	Yes	Transaction submission
tx.receive	No	No peers in standalone
consensus.*	No	Consensus disabled standalone

---

Test 2: 6-Node Consensus Network (Full Verification)

This test verifies ALL span categories including consensus and peer transaction relay, using a 6-node validator network.

Automated

Run the integration test script:

bash docker/telemetry/integration-test.sh

The script will:

1. Start the observability stack
2. Generate 6 validator key pairs
3. Create config files for each node
4. Start all 6 nodes
5. Wait for consensus ("proposing" state)
6. Exercise RPC, submit transactions
7. Verify all span categories in Tempo
8. Verify spanmetrics in Prometheus
9. Print results and leave the stack running

Manual

If you prefer to run the steps manually:

Step 1: Start observability stack

docker compose -f docker/telemetry/docker-compose.yml up -d

Step 2: Generate validator keys

Start a temporary standalone xrpld:

.build/xrpld --conf docker/telemetry/xrpld-telemetry.cfg -a --start &
TEMP_PID=$!
sleep 5

Generate 6 key pairs:

for i in $(seq 1 6); do
    curl -s http://localhost:5005 \
        -d '{"method":"validation_create"}' | jq '.result'
done

Record the validation_seed and validation_public_key for each. Kill the temporary node:

kill $TEMP_PID
rm -rf data/

Step 3: Create node configs

For each node (1-6), create a config file. Template:

[server]
port_rpc
port_peer

[port_rpc]
port = {5004 + node_number}
ip = 127.0.0.1
admin = 127.0.0.1
protocol = http

[port_peer]
port = {51234 + node_number}
ip = 0.0.0.0
protocol = peer

[node_db]
type=NuDB
path=/tmp/xrpld-integration/node{N}/nudb
online_delete=256

[database_path]
/tmp/xrpld-integration/node{N}/db

[debug_logfile]
/tmp/xrpld-integration/node{N}/debug.log

[validation_seed]
{seed from step 2}

[validators_file]
/tmp/xrpld-integration/validators.txt

[ips_fixed]
127.0.0.1 51235
127.0.0.1 51236
127.0.0.1 51237
127.0.0.1 51238
127.0.0.1 51239
127.0.0.1 51240

[peer_private]
1

[telemetry]
enabled=1
endpoint=http://localhost:4318/v1/traces
batch_size=512
batch_delay_ms=2000
max_queue_size=2048
trace_rpc=1
trace_transactions=1
trace_consensus=1
trace_peer=1
trace_ledger=1

[rpc_startup]
{ "command": "log_level", "severity": "warning" }

[ssl_verify]
0

Step 4: Create validators.txt

[validators]
{public_key_1}
{public_key_2}
{public_key_3}
{public_key_4}
{public_key_5}
{public_key_6}

Step 5: Start all 6 nodes

for i in $(seq 1 6); do
    .build/xrpld --conf /tmp/xrpld-integration/node$i/xrpld.cfg --start &
    echo $! >/tmp/xrpld-integration/node$i/xrpld.pid
done

Step 6: Wait for consensus

Poll each node until server_state = "proposing":

for port in 5005 5006 5007 5008 5009 5010; do
    while true; do
        state=$(curl -s http://localhost:$port \
            -d '{"method":"server_info"}' |
            jq -r '.result.info.server_state')
        echo "Port $port: $state"
        [ "$state" = "proposing" ] && break
        sleep 5
    done
done

Step 7: Exercise RPC and submit transaction

# RPC calls
curl -s http://localhost:5005 -d '{"method":"server_info"}'
curl -s http://localhost:5005 -d '{"method":"server_state"}'
curl -s http://localhost:5005 -d '{"method":"ledger","params":[{"ledger_index":"current"}]}'

# Submit transaction
curl -s http://localhost:5005 -d '{
  "method": "submit",
  "params": [{
    "secret": "snoPBrXtMeMyMHUVTgbuqAfg1SUTb",
    "tx_json": {
      "TransactionType": "Payment",
      "Account": "rHb9CJAWyB4rj91VRWn96DkukG4bwdtyTh",
      "Destination": "rPMh7Pi9ct699iZUTWzJaUMR1o42VEfGqF",
      "Amount": "10000000"
    }
  }]
}'

Wait 15 seconds for consensus and batch export.

Step 8: Verify in Tempo

See the "Verification Queries" section below.

---

Expected Span Catalog

What follows is a trigger catalogue, not an attribute reference: one row per span-name family, saying which config toggle gates it and what you have to do to make it appear. It covers all 41 span-name families the code emits, in eight subsystem groups — RPC (5), gRPC (1), Transaction (6), TxQ (6), Consensus (13), Ledger (4), Peer (2), PathFind (4).

For each span's attributes — span name, source file, full attribute set and description, per subsystem — see docs/telemetry-runbook.md § Span Reference; its § Protocol Span Flow gives the parent/child shape of a trace and calls out where telemetry parenting deliberately differs from the protocol flow. Both are kept in step with the code, so they are the reference to trust. One hole worth knowing: the runbook's Span Reference tables have no row for grpc.<MethodName> (it appears only in Protocol Span Flow). Its attributes are method, grpc_role and grpc_status, emitted from GRPCServer.cpp with the key constants in src/xrpld/app/main/GrpcSpanNames.h.

If you find an older inline span inventory in this file or elsewhere, do not trust it — the copy that used to live here had drifted badly (18 rows under a "16 spans" heading, whole families missing, and pre-rename dotted xrpl.* attribute keys the code no longer emits). The code and the runbook are the source of truth.

Span → How to Trigger

"Test" is the section of this file that exercises the family. T1 = Test 1 (standalone), T2 = Test 2 (6-node network).

Span family (count)	Config toggle	How to trigger	Test
RPC (5 total, 3 here): rpc.http_request, rpc.process, rpc.command.<name>	trace_rpc=1	Any HTTP JSON-RPC call: curl -s http://localhost:5005 -d '{"method":"server_info"}'. rpc.command.<name> is one family — the command name is part of the span name.	T1
RPC (cont.): rpc.ws_message, rpc.ws_upgrade	trace_rpc=1	Needs a WebSocket client against [port_ws_public] (6005) or [port_ws_admin_local] (6006). rpc.ws_upgrade covers the handshake — force a failure to see its error path. curl alone will not do it.	—
gRPC (1): grpc.<MethodName>	trace_rpc=1	Call a gRPC method (GetLedger, GetLedgerData, …). Requires a [port_grpc] stanza — the shipped xrpld-telemetry*.cfg files define none, so add one first.	—
Transaction (6 total, 4 here): tx.process, tx.preflight, tx.preclaim, tx.transactor	trace_transactions	Submit any transaction (T1 Step 4). The three apply-stage spans share the tx's deterministic trace id; the stage attribute says where a failing tx stopped.	T1
Transaction (cont.): tx.receive	trace_transactions	A peer relays a transaction. Never appears in standalone — submit on one node of the cluster and look on another.	T2
Transaction (cont.): tx.apply	trace_transactions	Ledger close with a non-empty transaction set: submit, then ledger_accept (T1) or wait for consensus (T2).	T1 / T2
TxQ (6): txq.enqueue, txq.apply_direct, txq.batch_clear, txq.accept, txq.accept_tx, txq.cleanup	trace_transactions	txq.enqueue/apply_direct on every submission; txq.accept/accept_tx/cleanup on every ledger close. To force real queueing, submit faster than ledgers close or with a fee below the required fee level.	T1
Consensus (13): consensus.round, .phase.open, .establish, .update_positions, .check, .proposal.send, .ledger_close, .accept, .accept.apply, .validation.send, .mode_change, .proposal.receive, .validation.receive	trace_consensus=1	Requires real consensus — standalone emits none of these. Bring up T2 and wait for nodes to reach proposing; one consensus.round per close. .mode_change needs an actual mode transition (stop/start a node).	T2
Ledger (4 total, 3 here): ledger.build, ledger.validate, ledger.store	trace_ledger=1	Any ledger close: ledger_accept in standalone, or consensus in T2.	T1 / T2
Ledger (cont.): ledger.acquire	trace_ledger=1	Node fetches a missing ledger from peers. Start a node with no history against a running cluster, or restart one node after the others have advanced.	T2
Peer (2): peer.proposal.receive, peer.validation.receive	trace_peer=1	Inbound consensus messages from peers; fresh trace roots. T2 only, and high volume.	T2
PathFind (4): pathfind.request, pathfind.compute, pathfind.discover, pathfind.update_all	trace_rpc=1	curl -s http://localhost:5005 -d '{"method":"ripple_path_find","params":[{"source_account":"…","destination_account":"…","destination_amount":"100"}]}'. pathfind.update_all fires on ledger close while a request is active.	T1

Notes that matter when a span you expect is missing:

• Toggles are per-subsystem and all default to on (trace_rpc, trace_transactions, trace_consensus, trace_peer, trace_ledger), but [telemetry] enabled defaults to 0 — nothing is emitted until it is 1.
• consensus.* and peer.* cannot be produced in standalone mode. If Test 1 shows none, that is correct behaviour, not a regression — see "Expected spans (standalone mode)" above.
• rpc.ws_* and grpc.* need a client and a port the quick tests do not use. Absence in T1/T2 is expected.
• Trace ids are deterministic for transactions (txID[0:16]) and consensus rounds (prevLedgerHash[0:16]), so you can compute the id you expect rather than searching for it.

---

Verification Queries

Tempo API

Base URL: http://localhost:3200

TEMPO="http://localhost:3200"

# List all services
curl -s "$TEMPO/api/v2/search/tag/resource.service.name/values" | jq '.tagValues[].value'

# Query traces by operation
for op in "rpc.http_request" "rpc.ws_upgrade" "rpc.ws_message" "rpc.process" \
    "rpc.command.server_info" "rpc.command.server_state" "rpc.command.ledger" \
    "tx.process" "tx.receive" "tx.apply" \
    "consensus.proposal.send" "consensus.ledger_close" \
    "consensus.accept" "consensus.accept.apply" \
    "consensus.validation.send" \
    "ledger.build" "ledger.validate" "ledger.store" \
    "peer.proposal.receive" "peer.validation.receive"; do
    count=$(curl -s "$TEMPO/api/search" \
        --data-urlencode "q={resource.service.name=\"xrpld\" && name=\"$op\"}" \
        --data-urlencode "limit=5" |
        jq '.traces | length')
    printf "%-35s %s traces\n" "$op" "$count"
done

Prometheus API

Base URL: http://localhost:9090

PROM="http://localhost:9090"

# Span call counts (from spanmetrics connector)
curl -s "$PROM/api/v1/query?query=span_calls_total" |
    jq '.data.result[] | {span: .metric.span_name, count: .value[1]}'

# Latency histogram
curl -s "$PROM/api/v1/query?query=span_duration_milliseconds_count" |
    jq '.data.result[] | {span: .metric.span_name, count: .value[1]}'

# RPC calls by command
curl -s "$PROM/api/v1/query?query=span_calls_total{span_name=~\"rpc.command.*\"}" |
    jq '.data.result[] | {command: .metric["command"], count: .value[1]}'

# Deployment-tier labels present on metrics (set by the collector's
# resource/tier processor and promoted via resource_to_telemetry_conversion).
# Expect deployment_environment and xrpl_network_type on each series.
curl -s "$PROM/api/v1/query?query=span_calls_total" |
    jq '.data.result[0].metric | {deployment_environment, xrpl_network_type, service_name}'

Grafana

Open http://localhost:3000 (anonymous admin access enabled).

Pre-configured dashboards: every .json under docker/telemetry/grafana/dashboards/ is provisioned into the xrpld folder — provisioning/dashboards/dashboards.yaml points the file provider at /var/lib/grafana/dashboards, which docker-compose.yml bind-mounts from that directory. Adding a file there is all that is needed; there is no per-dashboard registration.

For what each dashboard covers, see docs/telemetry-runbook.md § Grafana Dashboards — the per-dashboard reference. Listing them here would be a second copy that rots (this section previously named 5 of the 15 provisioned).

Pre-configured datasources:

• Tempo: Trace data at http://tempo:3200
• Prometheus: Metrics at http://prometheus:9090
• Loki: Log data at http://loki:3100 (via Grafana Explore)

---

Exporting to Grafana Cloud

Instead of (or alongside) the local backends, the collector can forward traces, metrics, and logs to a hosted Grafana Cloud stack. This is a runtime choice layered on top of the base stack — xrpld and the base docker-compose.yml are unchanged.

Step 1: Get Grafana Cloud OTLP credentials

From Grafana Cloud → Connections → OpenTelemetry (OTLP), note the OTLP gateway endpoint (ends in /otlp), the numeric instance id, and an access-policy token with metrics:write, traces:write, and logs:write.

Step 2: Fill in the env file

cp docker/telemetry/.env.grafanacloud.example docker/telemetry/.env.grafanacloud
# edit .env.grafanacloud:
#   GRAFANA_CLOUD_OTLP_ENDPOINT=https://otlp-gateway-<zone>.grafana.net/otlp
#   GRAFANA_CLOUD_INSTANCE_ID=<instance id>
#   GRAFANA_CLOUD_API_TOKEN=<token>

.env.grafanacloud is gitignored — never commit real tokens.

Step 3: Start the stack with cloud export enabled

docker compose -f docker/telemetry/docker-compose.yml \
    -f docker/telemetry/docker-compose.grafanacloud.yaml up -d

The override swaps the collector onto otel-collector-config.grafanacloud.yaml. It keeps the local Tempo/Prometheus/Loki exporters and adds an otlphttp/grafanacloud exporter, but it is not the base config plus one exporter — it restructures the pipelines. Bring the stack up with just the base file to return to local-only.

Differences that change what you will see:

	Base (otel-collector-config.yaml)	Cloud override
Pipelines	3: traces, metrics, logs	5: traces/metrics, traces/store, metrics/local, metrics/cloud, logs
Trace sampling	none — 100% of spans reach Tempo	tail_sampling keeps 0.5% (one probabilistic policy, decision_wait: 10s) on traces/store
debug exporter	present on traces	dropped
attributes/hash	present on traces	omitted
Cloud metric labels	n/a	transform/cloudlabels on metrics/cloud only

Consequences worth knowing before you debug against the cloud stack:

• Traces are sampled, span metrics are not. Sampling sits only on traces/store (the pipeline feeding Tempo and Grafana Cloud). The spanmetrics connector is fed by the separate, unsampled traces/metrics pipeline, so span_* rates stay exact while only ~1 trace in 200 is retrievable by trace ID. A trace you can see in a metric may not exist in Tempo.
• Pathfinding account hashing does not happen on the cloud export. The base config's attributes/hash processor hashes pathfind_source_account and pathfind_dest_account. It is absent from every cloud pipeline, so those two attributes leave for Grafana Cloud (and, on that config, for Tempo) with their raw account values.

Step 4: Verify data reaches Grafana Cloud

After exercising RPC/transaction workflows (Tests 1 or 2), open your Grafana Cloud instance and confirm:

• Traces: Explore → hosted Tempo datasource → search {resource.service.name="xrpld"}
• Metrics: Explore → hosted Prometheus/Mimir → query span_calls_total
• Logs: Explore → hosted Loki → query {service_name="xrpld"} (requires warning+ file logging). Not {job="xrpld"} — see the note under Test 3 Step 3.

If nothing appears, check the collector logs for auth/export errors:

docker compose -f docker/telemetry/docker-compose.yml \
    -f docker/telemetry/docker-compose.grafanacloud.yaml \
    logs otel-collector | grep -iE 'grafanacloud|401|403|export'

A 401/403 means the instance id or token is wrong; a connection error means the endpoint URL is wrong or missing the /otlp path.

---

Test 3: Log-Trace Correlation

xrpld injects trace_id and span_id into its log output when a log line is emitted within an active OTel span. This test verifies the end-to-end log-trace correlation pipeline.

Step 1: Verify trace_id in log output

After running Test 1 or Test 2 (which generate RPC spans), check the xrpld debug.log for trace context:

grep 'trace_id=[a-f0-9]\{32\} span_id=[a-f0-9]\{16\}' /path/to/debug.log

Expected: log lines with trace_id=<32hex> span_id=<16hex> between the severity code and the message. Example:

2024-Jan-15 10:30:45.123456 UTC RPCHandler:NFO trace_id=abc123def456789012345678abcdef01 span_id=0123456789abcdef Calling server_info

Lines emitted outside of an active span (background tasks, startup) will NOT have trace context — this is expected.

Step 2: Cross-check trace_id in Tempo

Extract a trace_id from the log and verify it exists in Tempo:

TRACE_ID=$(grep -o 'trace_id=[a-f0-9]\{32\}' /path/to/debug.log | head -1 | cut -d= -f2)
echo "Checking trace: $TRACE_ID"
curl -s "http://localhost:3200/api/traces/$TRACE_ID" | jq '.batches | length'

Expected result: > 0 (the trace exists in Tempo).

Step 3: Verify Loki log ingestion

The OTel Collector's filelog receiver tails xrpld's debug.log and exports parsed entries to Loki. Verify Loki has received entries:

# Query Loki for any xrpld logs
curl -sG "http://localhost:3100/loki/api/v1/query" \
    --data-urlencode 'query={service_name="xrpld"}' \
    --data-urlencode 'limit=5' | jq '.data.result | length'

Expected: > 0 results.

Use service_name, not job. The collector's resource/logs processor applies an upsert to both service.name=xrpld and job=xrpld (otel-collector-config.yaml:57-70), and its comment says the job attribute is there so operators can paste {job="xrpld"}. That does not work: on OTLP ingest Loki promotes only an allow-listed set of resource attributes to indexed stream labels (service.name → service_name, plus service.namespace, service.instance.id, deployment.environment, k8s.*, cloud.*), and job is not on the list. This repo mounts no Loki config override — the loki service runs the image's built-in /etc/loki/local-config.yaml (docker-compose.yml:75) — so job lands in structured metadata, which cannot be a stream selector. {job="xrpld"} therefore returns zero results with no error, which reads exactly like "logs are not being ingested". If this query is empty, check {service_name="xrpld"} before debugging the pipeline. All 38 Loki queries in the shipped dashboards select on service_name; none uses job.

Step 4: Verify Grafana Tempo-to-Loki correlation

1. Open Grafana at http://localhost:3000
2. Navigate to Explore -> select Tempo datasource
3. Search for a trace (e.g., operation rpc.command.server_info)
4. Click "Logs for this trace" in the trace detail view
5. Verify that Loki log lines appear, filtered by the trace's trace_id

Step 5: Verify Grafana Loki-to-Tempo correlation

1. In Grafana Explore, select Loki datasource
2. Query: {service_name="xrpld"} |= "trace_id="
3. In the log results, click the TraceID derived field link
4. Verify it navigates to the full trace in Tempo

Expected results

Check	Expected
trace_id= in debug.log	Present in log lines within active spans
span_id= in debug.log	Present alongside trace_id
Logs without active span	No trace_id/span_id fields
trace_id in Tempo	Matches a valid trace
Loki log ingestion	Logs visible via LogQL
Tempo -> Loki "Logs for trace"	Shows correlated log lines
Loki -> Tempo TraceID link	Navigates to correct trace

---

Troubleshooting

No traces in Tempo

1. Check otel-collector logs:

   docker compose -f docker/telemetry/docker-compose.yml logs otel-collector
   

2. Verify xrpld telemetry config has enabled=1 and correct endpoint
3. Check that otel-collector port 4318 is accessible (-f would fail on the receiver's 404 for GET /, so test for any HTTP status instead):

   curl -so /dev/null -w '%{http_code}\n' http://localhost:4318/
   

4. Increase batch_delay_ms or decrease batch_size in xrpld config

Nodes not reaching "proposing" state

1. Check that all peer ports (51235-51240) are not in use:

   for p in 51235 51236 51237 51238 51239 51240; do
       ss -tlnp | grep ":$p " && echo "port $p in use"
   done
   

2. Verify [ips_fixed] lists all 6 peer ports
3. Verify validators.txt has all 6 public keys
4. Check node debug logs: tail -50 /tmp/xrpld-integration/node1/debug.log
5. Ensure [peer_private] is set to 1 (prevents reaching out to public network)

Transaction not processing

1. Verify genesis account exists:

   curl -s http://localhost:5005 \
       -d '{"method":"account_info","params":[{"account":"rHb9CJAWyB4rj91VRWn96DkukG4bwdtyTh"}]}' |
       jq .result.account_data.Balance
   

2. Check submit response for error codes
3. In standalone mode, remember to call ledger_accept after submitting

No trace_id in log output

1. Verify xrpld was built with telemetry=ON (-Dtelemetry=ON in CMake)
2. Verify enabled=1 in the [telemetry] config section
3. Log lines only contain trace context when emitted inside an active span. Background logs (startup, periodic tasks outside spans) will not have trace_id/span_id.
4. Ensure the trace category is enabled (e.g., trace_rpc=1 for RPC logs)

No logs in Loki

1. Verify the log file mount in docker-compose.yml:

   volumes:
     - ${XRPLD_LOG_DIR:-./data/logs}:/var/log/xrpld:ro
   

   The mount source defaults to the repo-relative docker/telemetry/data/logs (where the telemetry configs write). Override XRPLD_LOG_DIR to tail logs from another root.
2. Check OTel Collector logs for filelog receiver errors:

   docker compose -f docker/telemetry/docker-compose.yml logs otel-collector | grep -i "filelog\|loki\|error"
   

3. Verify Loki is running:

   curl -s http://localhost:3100/ready
   

4. Verify the filelog receiver glob pattern matches your log files: The default pattern is /var/log/xrpld/*/debug.log

Grafana trace-log links not working

1. Verify tracesToLogs is configured in the Tempo datasource provisioning (docker/telemetry/grafana/provisioning/datasources/tempo.yaml)
2. Verify derivedFields is configured in the Loki datasource provisioning (docker/telemetry/grafana/provisioning/datasources/loki.yaml)
3. Restart Grafana after changing provisioning files:

   docker compose -f docker/telemetry/docker-compose.yml restart grafana
   

Spanmetrics not appearing in Prometheus

1. Verify otel-collector config has spanmetrics connector
2. Check that the metrics pipeline matches otel-collector-config.yaml verbatim:

   service:
     pipelines:
       metrics:
         receivers: [otlp, spanmetrics]
         processors: [resource/tier, resource/stripsdk, batch]
         exporters: [prometheus]
   

   Both receivers are required. spanmetrics carries the span-derived span_* series; otlp carries the node's native beast::insight / MetricsRegistry metrics, which arrive on the same OTLP port. Dropping otlp silently removes every native metric while the span_* ones keep working — so the dashboards only half-break.
3. Verify Prometheus can reach collector:

   curl -s http://localhost:9090/api/v1/targets | jq '.data.activeTargets'