rippled/docker/telemetry/TESTING.md

OpenTelemetry Integration Testing Guide

This document describes how to verify the xrpld OpenTelemetry telemetry pipeline end-to-end, from span generation through the observability stack (otel-collector, Tempo, Prometheus, Grafana).

---

Prerequisites

Build xrpld with telemetry

conan install . --build=missing -o telemetry=True
cmake --preset default -Dtelemetry=ON
cmake --build --preset default --target xrpld

The binary is at .build/xrpld.

Required tools

• Docker with docker compose (v2)
• curl
• jq (JSON processor)

Verify binary

.build/xrpld --version

---

Test 1: Single-Node Standalone (Quick Verification)

This test verifies RPC and transaction spans in standalone mode, plus the consensus spans that a simulated round still produces. The proposal, voting and peer-facing consensus spans do not fire — see the expected-spans table at the end of this test for which do and which do not.

Step 1: Start the observability stack

docker compose -f docker/telemetry/docker-compose.yml up -d

Wait for services to be ready:

# otel-collector health
curl -sf http://localhost:13133/ && echo "collector ready"

# Tempo readiness
curl -sf http://localhost:3200/ready >/dev/null && echo "tempo ready"

Step 2: Start xrpld in standalone mode

.build/xrpld --conf docker/telemetry/xrpld-telemetry.cfg -a --start

Wait a few seconds for the node to initialize.

Step 3: Exercise RPC spans

# server_info
curl -s http://localhost:5005 \
    -d '{"method":"server_info"}' | jq .result.info.server_state

# server_state
curl -s http://localhost:5005 \
    -d '{"method":"server_state"}' | jq .result.state.server_state

# ledger
curl -s http://localhost:5005 \
    -d '{"method":"ledger","params":[{"ledger_index":"current"}]}' |
    jq .result.ledger_current_index

Step 4: Submit a transaction

Close the ledger first (required in standalone mode):

curl -s http://localhost:5005 -d '{"method":"ledger_accept"}'

Submit a Payment from the genesis account:

curl -s http://localhost:5005 -d '{
  "method": "submit",
  "params": [{
    "secret": "snoPBrXtMeMyMHUVTgbuqAfg1SUTb",
    "tx_json": {
      "TransactionType": "Payment",
      "Account": "rHb9CJAWyB4rj91VRWn96DkukG4bwdtyTh",
      "Destination": "rPMh7Pi9ct699iZUTWzJaUMR1o42VEfGqF",
      "Amount": "10000000"
    }
  }]
}' | jq .result.engine_result

Expected result: "tesSUCCESS".

Close the ledger again to finalize:

curl -s http://localhost:5005 -d '{"method":"ledger_accept"}'

Step 5: Verify traces in Tempo

Wait 5 seconds for the batch export, then see the "Verification Queries" section below. Its span loop is a superset of what standalone mode produces, so compare its output against the "Expected spans (standalone mode)" table above rather than running a second, narrower set of queries here.

Or open Grafana Explore with Tempo datasource: http://localhost:3000

Step 6: Teardown

# Kill xrpld (Ctrl+C or)
kill $(pgrep -f 'xrpld.*xrpld-telemetry')

# Stop observability stack
docker compose -f docker/telemetry/docker-compose.yml down

# Clean xrpld data
rm -rf docker/telemetry/data/

Expected spans (standalone mode)

Span Name	Expected	Notes
rpc.http_request	Yes	Every HTTP RPC call
rpc.process	Yes	Every RPC processing
rpc.command.server_info	Yes	server_info RPC
rpc.command.server_state	Yes	server_state RPC
rpc.command.ledger	Yes	ledger RPC
rpc.command.submit	Yes	submit RPC
rpc.command.ledger_accept	Yes	ledger_accept RPC
tx.process	Yes	Transaction submission
tx.receive	No	No peers in standalone
consensus.round, .phase.open, .ledger_close, .accept, .accept.apply	Yes	ledger_accept drives a simulated round
consensus.establish, .update_positions, .check, .proposal.*, .validation.receive, .mode_change	No	simulate jumps straight to Accepted; no peers

---

Test 2: 6-Node Consensus Network (Full Verification)

This test verifies ALL span categories including consensus and peer transaction relay, using a 6-node validator network.

Automated

Run the integration test script:

bash docker/telemetry/integration-test.sh

It checks prerequisites, clears the previous run, brings up the observability stack, generates six validator key pairs and their node configs, starts the nodes, waits for consensus and then for a validated ledger, exercises RPC and submits a transaction, verifies traces in Tempo and both the spanmetrics and the StatsD-derived metrics in Prometheus, then prints a summary and leaves the stack running.

The script announces each step as it runs, so read its Step N: headers for the authoritative sequence — they are not restated here, because a numbered copy of them drifts as soon as a step is added.

Its Tempo checks cover the RPC, transaction, consensus, ledger and peer span categories from a fixed list, which is narrower than the loop in the "Verification Queries" section below.

Manual

If you prefer to run the steps manually:

Step 1: Start observability stack

docker compose -f docker/telemetry/docker-compose.yml up -d

Step 2: Generate validator keys

Start a temporary standalone xrpld:

.build/xrpld --conf docker/telemetry/xrpld-telemetry.cfg -a --start &
TEMP_PID=$!
sleep 5

Generate 6 key pairs:

for i in $(seq 1 6); do
    curl -s http://localhost:5005 \
        -d '{"method":"validation_create"}' | jq '.result'
done

Record the validation_seed and validation_public_key for each. Kill the temporary node:

kill $TEMP_PID
rm -rf docker/telemetry/data/

Step 3: Create node configs

For each node (1-6), create a config file. Template:

[server]
port_rpc
port_peer

[port_rpc]
port = {5004 + node_number}
ip = 127.0.0.1
admin = 127.0.0.1
protocol = http

[port_peer]
port = {51234 + node_number}
ip = 0.0.0.0
protocol = peer

[node_db]
type=NuDB
path=/tmp/xrpld-integration/node{N}/nudb
online_delete=256

[database_path]
/tmp/xrpld-integration/node{N}/db

[debug_logfile]
/tmp/xrpld-integration/node{N}/debug.log

[validation_seed]
{seed from step 2}

[validators_file]
/tmp/xrpld-integration/validators.txt

[ips_fixed]
127.0.0.1 51235
127.0.0.1 51236
127.0.0.1 51237
127.0.0.1 51238
127.0.0.1 51239
127.0.0.1 51240

[peer_private]
1

[telemetry]
enabled=1
endpoint=http://localhost:4318/v1/traces
batch_size=512
batch_delay_ms=2000
max_queue_size=2048
trace_rpc=1
trace_transactions=1
trace_consensus=1
trace_peer=1
trace_ledger=1

[rpc_startup]
{ "command": "log_level", "severity": "warning" }

[ssl_verify]
0

Step 4: Create validators.txt

[validators]
{public_key_1}
{public_key_2}
{public_key_3}
{public_key_4}
{public_key_5}
{public_key_6}

Step 5: Start all 6 nodes

for i in $(seq 1 6); do
    .build/xrpld --conf /tmp/xrpld-integration/node$i/xrpld.cfg --start &
    echo $! >/tmp/xrpld-integration/node$i/xrpld.pid
done

Step 6: Wait for consensus

Poll each node until server_state = "proposing":

for port in 5005 5006 5007 5008 5009 5010; do
    while true; do
        state=$(curl -s http://localhost:$port \
            -d '{"method":"server_info"}' |
            jq -r '.result.info.server_state')
        echo "Port $port: $state"
        [ "$state" = "proposing" ] && break
        sleep 5
    done
done

Step 7: Exercise RPC and submit transaction

# RPC calls
curl -s http://localhost:5005 -d '{"method":"server_info"}'
curl -s http://localhost:5005 -d '{"method":"server_state"}'
curl -s http://localhost:5005 -d '{"method":"ledger","params":[{"ledger_index":"current"}]}'

# Submit transaction
curl -s http://localhost:5005 -d '{
  "method": "submit",
  "params": [{
    "secret": "snoPBrXtMeMyMHUVTgbuqAfg1SUTb",
    "tx_json": {
      "TransactionType": "Payment",
      "Account": "rHb9CJAWyB4rj91VRWn96DkukG4bwdtyTh",
      "Destination": "rPMh7Pi9ct699iZUTWzJaUMR1o42VEfGqF",
      "Amount": "10000000"
    }
  }]
}' | jq .result.engine_result

Expected result: "tesSUCCESS", the same as Test 1 Step 4.

Wait 15 seconds for consensus and batch export.

Step 8: Verify in Tempo

See the "Verification Queries" section below.

---

Expected Span Catalog

A smoke-test subset: the spans a short local run reliably produces, and how to trigger each. This is not the full catalog — the authoritative span list, with the attributes each span carries, is docs/telemetry-runbook.md § Span Reference.

Attributes are deliberately not repeated here. Keeping a second copy is how this table came to list attribute keys that no longer exist anywhere in the code.

Span Name	Source File	How to Trigger
rpc.http_request	ServerHandler.cpp	Any HTTP RPC call
rpc.ws_upgrade	ServerHandler.cpp	WebSocket upgrade
rpc.ws_message	ServerHandler.cpp	WebSocket RPC message
rpc.process	ServerHandler.cpp	RPC processing
rpc.command.<name>	RPCHandler.cpp	Any RPC command
tx.process	NetworkOPs.cpp	Submit transaction
tx.receive	PeerImp.cpp	Peer relays transaction
consensus.proposal.send	RCLConsensus.cpp	Consensus proposing phase
consensus.ledger_close	RCLConsensus.cpp	Ledger close event
consensus.accept	RCLConsensus.cpp	Ledger accepted
consensus.validation.send	RCLConsensus.cpp	Validation sent
consensus.accept.apply	RCLConsensus.cpp	Ledger apply + close time
tx.apply	BuildLedger.cpp	Ledger close (tx set)
ledger.build	BuildLedger.cpp	Ledger build
ledger.validate	LedgerMaster.cpp	Ledger validated
ledger.store	LedgerMaster.cpp	Ledger stored
peer.proposal.receive	PeerImp.cpp	Peer sends proposal
peer.validation.receive	PeerImp.cpp	Peer sends validation

---

Verification Queries

Tempo API

Base URL: http://localhost:3200

TEMPO="http://localhost:3200"

# List all services
curl -s "$TEMPO/api/v2/search/tag/resource.service.name/values" | jq '.tagValues[].value'

# Query traces by operation
for op in "rpc.http_request" "rpc.ws_upgrade" "rpc.ws_message" "rpc.process" \
    "rpc.command.server_info" "rpc.command.server_state" "rpc.command.ledger" \
    "tx.process" "tx.receive" "tx.apply" \
    "consensus.proposal.send" "consensus.ledger_close" \
    "consensus.accept" "consensus.accept.apply" \
    "consensus.validation.send" \
    "ledger.build" "ledger.validate" "ledger.store" \
    "peer.proposal.receive" "peer.validation.receive"; do
    count=$(curl -s "$TEMPO/api/search" \
        --data-urlencode "q={resource.service.name=\"xrpld\" && name=\"$op\"}" \
        --data-urlencode "limit=5" |
        jq '.traces | length')
    printf "%-35s %s traces\n" "$op" "$count"
done

Prometheus API

Base URL: http://localhost:9090

PROM="http://localhost:9090"

# Span call counts (from spanmetrics connector)
curl -s "$PROM/api/v1/query?query=traces_span_metrics_calls_total" |
    jq '.data.result[] | {span: .metric.span_name, count: .value[1]}'

# Latency histogram
curl -s "$PROM/api/v1/query?query=traces_span_metrics_duration_milliseconds_count" |
    jq '.data.result[] | {span: .metric.span_name, count: .value[1]}'

# RPC calls by command
curl -s "$PROM/api/v1/query?query=traces_span_metrics_calls_total{span_name=~\"rpc.command.*\"}" |
    jq '.data.result[] | {command: .metric.command, count: .value[1]}'

# Deployment-tier labels present on metrics (set by the collector's
# resource/tier processor and promoted via resource_to_telemetry_conversion).
# Expect deployment_environment and xrpl_network_type on each series.
curl -s "$PROM/api/v1/query?query=traces_span_metrics_calls_total" |
    jq '.data.result[0].metric | {deployment_environment, xrpl_network_type, service_name}'

Grafana

Open http://localhost:3000 (anonymous admin access enabled).

Pre-configured dashboards:

• RPC Performance: Request rates, latency percentiles by command, top commands, WebSocket rate
• Transaction Overview: Transaction processing rates, apply duration, peer relay, failed tx rate
• Consensus Health: Consensus round duration, proposer counts, mode tracking, accept heatmap
• Ledger Operations: Build/validate/store rates and durations, TX apply metrics
• Peer Network: Proposal/validation receive rates, trusted vs untrusted breakdown (requires trace_peer=1)

Pre-configured datasources:

• Tempo: Trace data at http://tempo:3200
• Prometheus: Metrics at http://prometheus:9090

---

Troubleshooting

No traces in Tempo

1. Check otel-collector logs:

   docker compose -f docker/telemetry/docker-compose.yml logs otel-collector
   

2. Verify xrpld telemetry config has enabled=1 and correct endpoint
3. Check that otel-collector port 4318 is accessible:

   curl -sf http://localhost:4318 && echo "reachable"
   

4. Increase batch_delay_ms or decrease batch_size in xrpld config

Nodes not reaching "proposing" state

1. Check that all peer ports (51235-51240) are not in use:

   for p in 51235 51236 51237 51238 51239 51240; do
       ss -tlnp | grep ":$p " && echo "port $p in use"
   done
   

2. Verify [ips_fixed] lists all 6 peer ports
3. Verify validators.txt has all 6 public keys
4. Check node debug logs: tail -50 /tmp/xrpld-integration/node1/debug.log
5. Ensure [peer_private] is set to 1 (prevents reaching out to public network)

Transaction not processing

1. Verify genesis account exists:

   curl -s http://localhost:5005 \
       -d '{"method":"account_info","params":[{"account":"rHb9CJAWyB4rj91VRWn96DkukG4bwdtyTh"}]}' |
       jq .result.account_data.Balance
   

2. Check submit response for error codes
3. In standalone mode, remember to call ledger_accept after submitting

Spanmetrics not appearing in Prometheus

1. Verify otel-collector config has spanmetrics connector
2. Check that the metrics pipeline is configured:

   service:
     pipelines:
       metrics:
         receivers: [spanmetrics]
         exporters: [prometheus]
   

3. Verify Prometheus can reach collector:

   curl -s http://localhost:9090/api/v1/targets | jq '.data.activeTargets'