The runbook span table, the phase-4 task list and the data reference all
conflicted: this branch had already expanded them with the open-phase,
avalanche and proposal-prefix attributes. Keep this branch's tables and
apply the close-time rename to their rows.
The close_time entry in ledger_history_mismatch_total{reason} is a metric
label value, not the span attribute, and is deliberately unchanged.
The consensus and ledger attribute tables conflicted: this branch had
already rewritten both, adding the open-phase and avalanche attributes and
correcting tx_count/tx_failed to sit on tx.apply alone. Keep this branch's
tables and apply the close-time rename to their rows, rather than taking
either side whole.
The emitted keys carry the unit and epoch suffix. Update the consensus
and ledger attribute tables and the ledger.build span row to match.
The Close Time Drift panel row is left alone: phase-7 removes that whole
table, so editing it here would only conflict on the way forward.
The consensus.accept.apply row listed close_time, parent_close_time and
close_time_self. The emitted keys carry the unit and epoch suffix, so
update the row to match.
Eighteen conflict regions across nine files. Resolved by asking, per
region, which side is the better final state rather than by taking a
branch wholesale.
Telemetry.cpp keeps phase-9's two resource builders. phase-8 offered a
single makeResource() with no node identity; phase-9 splits it into
makeTracerResource() and makeMetricsResource() because the metrics
provider is built in the constructor, before setNodeId() runs, so
xrpl.node.id can only be stamped unconditionally on the tracer side.
Collapsing them would have dropped that attribute, which is what keeps
per-node traces from folding into one identity.
Telemetry.h and the config test compose both sides: phase-9's nodeId
member and its assertion, plus the renamed endpoint.
xrpld-telemetry.cfg keeps phase-9's devnet identity and its
metrics_endpoint, renames the traces key, and drops exporter=otlp_http.
Nothing reads an `exporter` key on any branch in the chain: it was a real
Setup member in the first phase-1b implementation, removed when only
OTLP/HTTP was wired up, and already deleted from TESTING.md once on the
same grounds. The cfg line was the last carrier.
The docs keep phase-9's versions, which are both fuller and more
accurate: the incoming runbook listed the consensus strategy values as
"random" where the code compares against "attribute".
OTelCollector.cpp had five comment-only regions in a file phase-7 owns,
so those take the upstream side.
MetricsRegistry.h's usage example named a member that no longer exists
and the wrong arity; it now matches the real three-argument call and says
where the endpoint comes from.
Ten conflict regions in four files, none of them caused by the rename.
phase-8's own commit had rewritten comments in files phase-7 owns
(Unit.h, HistogramBuckets.h, OTelCollector.cpp) and in Telemetry.cpp,
while the same sweep ran independently on phase-7.
Resolved every region to phase-7's side on ownership grounds: those files
belong to phase-7 or earlier, so a downstream branch should not carry
divergent copies. phase-8 changed comments only in all four, verified
against the merge base, so no code was dropped.
The one structural region: phase-7 had refactored addUnitView from an
inline lambda into a member function, and phase-8 still held the lambda.
Keeping phase-8's would have shadowed the member.
Wording phase-8 had that is worth restoring on phase-7 -- the "legacy"
qualifier on the prefix parameter, and the rejected-alternative note on
the bucket ladders -- is recorded outside the tree for a follow-up.
Three conflicts, all composed rather than resolved by taking a side:
- TelemetryConfig.cpp: phase-6 kept networkTypeFromId file-local with
[[nodiscard]]; phase-7 had relocated it to public scope for
Application.cpp. Kept phase-7's relocation, so one definition remains.
The [[nodiscard]] survives on the declaration in Telemetry.h.
- Telemetry.cpp x2: phase-7 added getMeter overrides, phase-6 added
[[nodiscard]] to the startSpan below them. Kept both, and put
[[nodiscard]] on getMeter too.
- TESTING.md: phase-7 had the right metric name (span_calls_total, which
the spanmetrics namespace produces) but the wrong label. Its
xrpl.rpc.command appears nowhere else in the branch; the attribute is
bare `command`, which is what the dashboards query. Took phase-7's
metric with the correct label.
Both signalEndpoint call sites follow the renamed member. signalEndpoint
itself is left in place: removing it and adding metrics_endpoint is a
design change, not part of propagating a rename.
The rename arrived from phase-1b by merge; the runbook still told
operators to set `endpoint`, which the parser no longer reads. Updates
the Quick Start ini block and the Configuration Reference row.
No metrics_endpoint row is added: this branch exports no metrics, so
documenting the key here would describe something the code ignores.
Harness and docs:
- integration-test.sh queried traces_span_metrics_* for spanmetrics, but this
branch sets the connector namespace to "span", so those two checks matched
nothing and failed. The dashboards and runbook had moved; the script had not.
- The same script queried eight native metric names with a product prefix and
capitals that formatName() cannot produce: it lowercases, maps '.' and ' ' to
'_', and prepends nothing. Corrected against the runbook tables.
- TESTING.md carried the same stale spanmetrics names and a jq example reading
a Prometheus label that does not exist.
- The runbook now records where each part of a derived metric name comes from,
since only the namespace is ours to choose.
Collector:
- OTelCounterImpl::increment silently dropped a negative amount. An OTel
counter takes unsigned deltas, so assert and let a release build under-count
rather than wrap.
- OTelGaugeImpl::increment computed current + amount in int64, which is
undefined on overflow, and the clamp ran afterwards so it could not help.
Check the headroom first. set() now clamps rather than casting a uint64 above
INT64_MAX to a negative, which is what made underflow reachable.
- The meter scope was two bare literals. They are constants now, and
Telemetry.cpp static_asserts them equal to kMeterName and kMeterVersion:
beast cannot include the telemetry header, so a build failure is the only way
to catch the copies drifting.
- formatName uses views::transform and ranges::to, as Backend.cpp already does.
- Unused constructor parameters take [[maybe_unused]] instead of (void) casts.
- The destructor logged "shutting down" and "stopped" with nothing between.
initMetrics was 79 lines doing four jobs. The exporter and the histogram views
are separate functions now, addUnitView is a member rather than a lambda
capturing this, and the export interval and timeout are named. It also derived
the metrics URL from the traces URL by suffix swap, which sent metrics to the
traces path whenever the configured URL had any other shape; both URLs now come
from one rule that handles a bare host, a trailing slash and either signal path.
Review feedback on the testing guide:
- rm -rf targeted data/, but this config writes under docker/telemetry/data/,
so teardown did nothing and a second run reused the old NuDB and SQLite
state. Corrected at both sites, including the Test 2 keygen node, which
launches with the same config.
- The standalone span table said consensus.* does not fire. It does:
ledger_accept drives a simulated round, so consensus.round, .phase.open,
.ledger_close, .accept and .accept.apply all appear. Only .establish,
.update_positions, .check, .proposal.* , .validation.receive and
.mode_change cannot. The test intro claimed the same thing and now agrees
with the table.
- Three blocks duplicated content the file already had. Test 1 now points at
the shared Verification Queries section as Test 2 already did, and the
Test 2 submit block checks engine_result like Test 1 does.
- The numbered step list was a copy of the script's own Step N headers and had
drifted by four entries, so it now points at those headers instead.
Also corrects the runbook's ledger and peer span tables against the code:
ledger.build was credited with tx_count and tx_failed, which tx.apply sets,
and was missing its three close-time attributes; peer.validation.receive was
missing ledger_hash and full_validation. The five source line numbers in those
two tables were stale, so they now name the file only, as the other nineteen
rows do.
The rule's rationale said its three points were 'learned from a dataset that an
earlier version of this table got wrong'. That earlier table exists only in this
branch's intermediate commits, which a squash merge does not publish, so the
sentence points at nothing a reader can check.
The measured figures behind each point are unchanged.
Documentation only.
State that exists only to be reported was being written with preprocessor
branches at each site, which put #ifdef through business logic and gave the
owning class a different member set per build.
Document kEnabled, Stopwatch and Counter, and the two constraints that decide
whether they fit a site: a no-op method still evaluates its arguments, and
if constexpr still type-checks the branch it discards.
The table of contents in this file indexes third- and fourth-level headings,
so a new subsection that is absent from it is a gap rather than a style
choice.
Compiled out, compiled in and tracing, compiled in with no active span, and
compiled in but disabled by config all have to produce the right wire bytes,
and only two of them are obvious. Tabulate them, and record why the predicate
reads the context directly instead of calling GetSpan(), which allocates a
DefaultSpan in the no-span case.
mutable_ on a protobuf optional submessage allocates it and sets its has-bit
at the call site, before the helper can decide there is nothing to write. A
caller that dereferences it ships an empty TraceContext whenever nothing is
recorded, and its peers each take a branch to extract nothing.
Document the rule with the right and wrong forms side by side.
The conditional-compilation section promised zero overhead when telemetry is
not wanted. The span disappears, but the arguments passed to it do not: the
compiled-out guards are ordinary inline functions, so a to_string() or a hash
in an argument list still runs and its result is then discarded.
State that, show the guard that does remove the work, and name the opposite
case -- the metric macros, which discard their arguments and need no guard.
Four conflicts. None was a take-a-side.
xrpld-telemetry.cfg: dropped the incoming [insight] block. This branch already
has one, and duplicate ini sections do not replace each other -- parseIniFile
appends onto the same section, so keys merge last-wins and the effective config
is one that appears nowhere in the file.
src/tests/libxrpl/CMakeLists.txt: kept this branch's else() branch, which
compiles MetricsRegistry.cpp for the telemetry-off build, and dropped only the
ValidationTracker target_sources inside if(telemetry). Upstream relocated that
one out of the guard, so keeping both would have compiled it twice. The
else() branch is this branch's own: the MetricsRegistry test exists only here,
and without its implementation the off build would not link.
RCLConsensus.cpp: union. The metric macros and registry come from this branch,
PropagationHelpers from upstream; all three are used.
PeerImp.cpp: MetricMacros.h stays unguarded, because all seven XRPL_METRIC_*
uses in this file are on unconditional paths and the header is what defines
them. ConsensusReceiveTracing.h takes upstream's guarded placement, and this
branch's guarded GetObjectMetricNames.h is kept beside it.
formatName() never reads prefix, so setting it here does nothing and the
exported names are bare and lowercase. Leaving it invites queries written
against xrpld_jobq_job_count, which match no series.
The StatsD examples keep it, because that path does apply it to the name.
The row listed only the two end-of-phase attributes. Add the four set at span
creation and the three set at the close decision.
Records what the previous wording implied but did not state: the end-of-phase
attributes are absent when the round is recovered by handleWrongLedger or
driven by simulate(), because neither reaches closeLedger(). Any average over
open_duration_ms silently excludes those rounds.
Edited here rather than on phase 5, where this cell is empty and would conflict
on the way up.
close_time_avalanche_state is new; the row also did not say that the other
three are rewritten on every convergence iteration, so a reader could not tell
that the exported value is the last one rather than a series.
This row is byte-identical on phases 5 through 10, so it is edited here and
merges forward. The consensus.phase.open row is empty until phase 9 and is
updated there instead.
The runbook's metric tables are headed "Prometheus Metric", so they
should carry the series names an operator can paste into Grafana. Five
counter rows carried the code-side name instead: the OTel Prometheus
exporter appends _total, so rpc_requests, ledger_fetches,
ledger_history_mismatch, warn and drop name no series at all. Verified
two ways: every dashboard queries the _total form and never the bare
one, and phase-10's expected_metrics.json lists the _total names. The
same file already used warn_total further down, so it contradicted
itself.
Nine panel rows documented a hardcoded [5m] window where the panel
actually uses $__rate_interval. The RPC Request Rate row had both
faults.
Left alone deliberately:
- four histogram _bucket rows keep [5m], because the dashboards
hardcode the window for bucket queries and the dashboard linter only
flags hardcoded ranges on counter-rate shapes;
- three example queries inside fenced code blocks, which are standalone
snippets rather than panel documentation;
- the All Traffic Categories (Detail) row, which phase-10 has already
rewritten to the label_replace shape.
Prettier re-padded two table separator rows because the longer names
widen the columns.
