fix broken links

Bump golang.org/x/crypto from 0.35.0 to 0.45.0 in /_code-samples/partial-payment/go

@l10n/es-ES/docs/concepts/accounts/account-types.md

@@ -74,8 +74,8 @@ Si una dirección de reserva se ve comprometida, las consecuencias son similares
     - [Cuentas](index.md)
     - [Claves criptográficas](cryptographic-keys.md)
 - **Tutoriales:**
-    - [Asignar par de claves regulares](../../tutorials/how-tos/manage-account-settings/assign-a-regular-key-pair.md)
-    - [Cambiar o eliminar par de claves regulares](../../tutorials/how-tos/manage-account-settings/change-or-remove-a-regular-key-pair.md)
+    - [Asignar par de claves regulares](/docs/tutorials/best-practices/key-management/assign-a-regular-key-pair.md)
+    - [Cambiar o eliminar par de claves regulares](/docs/tutorials/best-practices/key-management/change-or-remove-a-regular-key-pair.md)
 - **Referencias:**
     - [metodo account_info][]
     - [Transacción SetRegularKey][]

@l10n/es-ES/docs/concepts/accounts/cryptographic-keys.md

@@ -88,7 +88,7 @@ El [metodo wallet_propose][] es una forma de generar el par de claves maestras.
 
 **Atención:** Si un actor malicioso conoce tu clave privada maestra (o semilla), tendrá control completo sobre tu cuenta, a no ser que tu par de claves maestras se inhabilite. Puedes tomar todo tu dinero de la cuenta posee y causar un daño irreparable. ¡Trata tus valores secretos con cuidado!
 
-Dado que cambiar el par de claves maestras es imposible, debes cuidarlo en proporción al valor de lo que posea. Una buena práctica es [guardar tu par de claves maestras offline](../../tutorials/how-tos/manage-account-settings/offline-account-setup.md) y configurar un par de claves normales para firmar transacciones en tu cuenta. Al mantener el par de claves maestras activadas pero offline, puedes estar razonablemente seguro de que nadie puede acceder a él a través de Internet, pero aun así deberías encontrarlo en caso de una emergencia.
+Dado que cambiar el par de claves maestras es imposible, debes cuidarlo en proporción al valor de lo que posea. Una buena práctica es [guardar tu par de claves maestras offline](/docs/tutorials/best-practices/key-management/offline-account-setup.md) y configurar un par de claves normales para firmar transacciones en tu cuenta. Al mantener el par de claves maestras activadas pero offline, puedes estar razonablemente seguro de que nadie puede acceder a él a través de Internet, pero aun así deberías encontrarlo en caso de una emergencia.
 
 Mantener tu par de claves maestras offline significa no colocar tu información secreta (passphrase, semilla, or clave privada) en cualquier sitio en que los actores maliciosos puedan tener acceso a él. En general, esto quiere decir que no está al alcance de un programa inofrmático que interactúe con Internet. Por ejemplo, puedes guardarlo en un equipo que no se conecta nunca a Internet, en un trozo de papel guardado en una caja fuerte, o tenerla completamente memorizada. (Memorizarla tiene algunos puntos inconvenientes, incluido ser imposible pasar la clave una vez muerto.)
 
@@ -119,7 +119,7 @@ Una buena práctica de seguridad es guardar tu clave privada maestra en algun si
 
 El par de claves normales tiene el mismo formato que el par de claves maestras. Las generas de la misma forma (por ejemplo, usando el [método wallet_propose][]). La única diferencia es que el par de claves normales es que el par no está intrínsicamente vinculado a la cuenta para la que firma transacciones. Es posible (pero no es buena idea) utilizar el par de claves maestras de una cuenta como lel par de claves normales para otra cuenta.
 
-La [transacción SetRegularKey][] asigna o cambia el par de claves normales de una cuenta. Para un tutorial de asignación o cambio de un par de claves normales, ver [Asignar par de claves normales](../../tutorials/how-tos/manage-account-settings/assign-a-regular-key-pair.md).
+La [transacción SetRegularKey][] asigna o cambia el par de claves normales de una cuenta. Para un tutorial de asignación o cambio de un par de claves normales, ver [Asignar par de claves normales](/docs/tutorials/best-practices/key-management/assign-a-regular-key-pair.md).
 
 
 ## Algorítmos de firma
@@ -248,8 +248,8 @@ Los pasos para derivar par de claves de cuenta XRP Ledger secp256k1 desde un val
 - **Conceptos:**
     - [Direcciones de emisión y operacionales](account-types.md)
 - **Tutoriales:**
-    - [Asignación de par de claves normales](../../tutorials/how-tos/manage-account-settings/assign-a-regular-key-pair.md)
-    - [Cambiar o eliminar par de claves normales](../../tutorials/how-tos/manage-account-settings/change-or-remove-a-regular-key-pair.md)
+    - [Asignación de par de claves normales](/docs/tutorials/best-practices/key-management/assign-a-regular-key-pair.md)
+    - [Cambiar o eliminar par de claves normales](/docs/tutorials/best-practices/key-management/change-or-remove-a-regular-key-pair.md)
 - **Referencias:**
     - [Transacción SetRegularKey][]
     - [Objeto de ledger AccountRoot](../../references/protocol/ledger-data/ledger-entry-types/accountroot.md)

@l10n/es-ES/docs/concepts/accounts/index.md

@@ -63,7 +63,7 @@ La forma típica de obtener una cuenta en el XRP Ledger es la siguiente:
     - [Transacción Payment][]
     - [Objeto AccountRoot](../../references/protocol/ledger-data/ledger-entry-types/accountroot.md)
 - **Tutoriales:**
-    - [Administrar configuración de la cuenta (Categoría)](../../tutorials/how-tos/manage-account-settings/index.md)
-    - [Monitorizar pagos entrantes con WebSocket](../../tutorials/http-websocket-apis/build-apps/monitor-incoming-payments-with-websocket.md)
+    - [Administrar configuración de la cuenta (Categoría)](/docs/tutorials/best-practices/key-management/assign-a-regular-key-pair.md)
+    - [Monitorizar pagos entrantes con WebSocket](/docs/tutorials/advanced-developer-topics/client-library-development/monitor-incoming-payments-with-websocket.md)
 
 {% raw-partial file="/docs/_snippets/common-links.md" /%}

@l10n/es-ES/docs/concepts/accounts/multi-signing.md

@@ -60,7 +60,7 @@ Podría darse el caso donde crees una lista de multi firma como "plan de respald
 
 Para enviar transacciones multi-signed de forma satisfactoria, debes de hacer todo lo siguiente:
 
-* La dirección que envía la transacción (especificada en el campo `Account`) debe tener un [objeto `SignerList` en el ledger ](../../references/protocol/ledger-data/ledger-entry-types/signerlist.md). Para instrucciones de cómo hacer esto, ver [Set Up Multi-Signing](../../tutorials/how-tos/manage-account-settings/set-up-multi-signing.md).
+* La dirección que envía la transacción (especificada en el campo `Account`) debe tener un [objeto `SignerList` en el ledger ](../../references/protocol/ledger-data/ledger-entry-types/signerlist.md). Para instrucciones de cómo hacer esto, ver [Set Up Multi-Signing](/docs/tutorials/best-practices/key-management/set-up-multi-signing.md).
 * La transacción debe incluir el campo `SigningPubKey` como un valor vacío.
 * La transacción debe incluir el [campo `Signers`](../../references/protocol/transactions/common-fields.md#signers-field) conteniendo un array de firmas.
 * Las firmas presentadas en el array `Signers` debe coincidir con los firmantes definidos en la `SignerList`.
@@ -72,8 +72,8 @@ Para enviar transacciones multi-signed de forma satisfactoria, debes de hacer to
 ## Ver también
 
 - **Tutoriales:**
-    - [Configurar Multi-Signing](../../tutorials/how-tos/manage-account-settings/set-up-multi-signing.md)
-    - [Envíar una transacción Multi-Signed](../../tutorials/how-tos/manage-account-settings/send-a-multi-signed-transaction.md)
+    - [Configurar Multi-Signing](/docs/tutorials/best-practices/key-management/set-up-multi-signing.md)
+    - [Envíar una transacción Multi-Signed](/docs/tutorials/best-practices/key-management/send-a-multi-signed-transaction.md)
 - **Conceptos:**
     - [Claves criptográficas](cryptographic-keys.md)
     - [Coste de transacción especial para transacciones Multi-signed](../transactions/transaction-cost.md#special-transaction-costs)

@l10n/es-ES/docs/concepts/accounts/reserves.md

@@ -54,7 +54,7 @@ Las aplicaciones pueden buscar los valores de las reservas base e incremental ac
 
 Para determinar las reservas de propietario de una cuenta, hay que multiplicar la reserva incremental por el número de objetos que la cuenta posee. Para mirar el número de objetos que una cuenta posee, llama al [método account_info][] y toma `account_data.OwnerCount`.
 
-Para calcular el requisito total de direcciones, multiplica `OwnerCount` por `reserve_inc_xrp`, y luego suma `reserve_base_xrp`. [Aquí tienes una demostración](../../tutorials/python/build-apps/build-a-desktop-wallet-in-python.md#codeblock-17) del cálculo en Python.
+Para calcular el requisito total de direcciones, multiplica `OwnerCount` por `reserve_inc_xrp`, y luego suma `reserve_base_xrp`. [Aquí tienes una demostración](/docs/tutorials/sample-apps/build-a-desktop-wallet-in-python.md#codeblock-17) del cálculo en Python.
 
 
 ## Quedarse por debajo del requisito de reserva
@@ -76,6 +76,6 @@ El XRP Ledger tiene un mecanismo para ajustar los requisitos de reserva. Estos a
 - [Objeto AccountRoot][]
 - [Votación de Fee](../consensus-protocol/fee-voting.md)
 - [Pseudo-transacción SetFee][]
-- [Tutorial: Calcular y mostrar los requisitos de reserva (Python)](../../tutorials/python/build-apps/build-a-desktop-wallet-in-python.md#3-display-an-account)
+- [Tutorial: Calcular y mostrar los requisitos de reserva (Python)](/docs/tutorials/sample-apps/build-a-desktop-wallet-in-python.md#3-display-an-account)
 
 {% raw-partial file="/docs/_snippets/common-links.md" /%}

@l10n/es-ES/docs/concepts/accounts/tickets.md

@@ -63,7 +63,7 @@ Cualquier cuenta puede crear y utilizar Tickets en cualquier tipo de transaccion
 - **Conceptos:**
     - [Multi-Signing](multi-signing.md)
 - **Tutoriales:**
-    - [Usar Tickets](../../tutorials/how-tos/manage-account-settings/use-tickets.md)
+    - [Usar Tickets](/docs/tutorials/best-practices/transaction-sending/use-tickets.md)
 - **Referencias:**
     - [Transacción TicketCreate][]
     - [Campos comunes de una transacción](../../references/protocol/transactions/common-fields.md)

@l10n/es-ES/docs/concepts/networks-and-servers/index.md

@@ -27,7 +27,7 @@ Necesitas confiar en el servidor que utilizas. Si te conectas a un servidor mali
 * Podría selectivamente mostrar u ocultar los caminos (o paths) de pago y las foertas de intercambio de divisas para garantizar su propio beneficio mientras no te ofrece la mejor oferta.
 * Si le enviaste la clave secreta de tu dirección, esto podría generar transacciones arbitrarias en tu nombre e incluso transferir o destruir todo el dinero que la dirección posee.
 
-Adicionalmente, ejecutar tu propio servidor te da [acceso de administrador](../../tutorials/http-websocket-apis/build-apps/get-started.md#admin-access), lo que te permite ejecutar comandos exclusivos de administrador y de carga intensa. Si utilizas un servidor compartido, debes preocuparte por los otros usuarios del mismo servidor compitiendo contra ti por el poder de computación del servidor. Muchos de los comandos en el API WebSocket puede poner mucha presión sobre el servidor, por lo que el servidor tiene la opción de reducir sus respuestas cuando lo necesite. Si compartes un servidor con otros, puede que no siempre consigas los mejores resultados posibles.
+Adicionalmente, ejecutar tu propio servidor te da [acceso de administrador](/docs/tutorials/get-started/get-started-http-websocket-apis.md#admin-access), lo que te permite ejecutar comandos exclusivos de administrador y de carga intensa. Si utilizas un servidor compartido, debes preocuparte por los otros usuarios del mismo servidor compitiendo contra ti por el poder de computación del servidor. Muchos de los comandos en el API WebSocket puede poner mucha presión sobre el servidor, por lo que el servidor tiene la opción de reducir sus respuestas cuando lo necesite. Si compartes un servidor con otros, puede que no siempre consigas los mejores resultados posibles.
 
 Finalmente, si ejecutas un servidor de validación, puedes utilizar un servidor común como proxy a la red pública mientras mantienes tu servidor de vaalidación en una red privada la cual es solo accesible desde el mundo exterior desde tu servidor común. Esto hace más difícil comprometer la integridad de tu servidor de validación.
 

@l10n/ja/docs/_snippets/checkcash-prereqs.md

@@ -6,4 +6,4 @@ Checkを換金するための前提条件は、正確な金額を換金する場
 - 発行済み通貨用のCheckの場合は、ご自身（受取人）にイシュアーに対するトラストラインがある必要があります。このトラストライン上のご自身の限度額は、受け取る金額を追加するための残高より十分高くなければなりません。
   - トラストラインと限度額について詳しくは、[トークン](../concepts/tokens/index.md)および[トラストラインと発行](../concepts/tokens/fungible-tokens/index.md)をご覧ください。
 - [トランザクションに安全に署名できる手段](../concepts/transactions/secure-signing.md)。
-- XRP Ledgerに接続できる[クライアントライブラリ](../references/client-libraries.md)か、それとも[HTTPライブラリ、WebSocketライブラリなど](../tutorials/http-websocket-apis/build-apps/get-started.md)。
+- XRP Ledgerに接続できる[クライアントライブラリ](../references/client-libraries.md)か、それとも[HTTPライブラリ、WebSocketライブラリなど](../tutorials/http-websocket-apis/get-started.md)。

@l10n/ja/docs/_snippets/post-rippled-install.md

@@ -2,7 +2,7 @@
 
 `rippled`ログメッセージの詳細は、[ログメッセージについて](../infrastructure/troubleshooting/understanding-log-messages.md)をご覧ください。
 
-`rippled`が残りのネットワークと同期されたら、ストック`rippled`サーバが完全に機能するようになります。このサーバを、ローカル署名やXRP LedgerへのAPIアクセスに使用できます。`rippled`サーバがネットワークと同期されているかどうかを判別するには、[`rippled`サーバの状況](../references/http-websocket-apis/api-conventions/rippled-server-states.md)を使用します。[`rippled`のコマンドラインインターフェイス](../tutorials/http-websocket-apis/build-apps/get-started.md#コマンドライン)を使用すれば、これを迅速にテストできます。
+`rippled`が残りのネットワークと同期されたら、ストック`rippled`サーバが完全に機能するようになります。このサーバを、ローカル署名やXRP LedgerへのAPIアクセスに使用できます。`rippled`サーバがネットワークと同期されているかどうかを判別するには、[`rippled`サーバの状況](../references/http-websocket-apis/api-conventions/rippled-server-states.md)を使用します。[`rippled`のコマンドラインインターフェイス](../tutorials/http-websocket-apis/get-started.md#コマンドライン)を使用すれば、これを迅速にテストできます。
 
 ```sh
 rippled server_info

@theme/plugins/blog-posts.js

@@ -47,6 +47,7 @@ export function blogPosts() {
         actions.createSharedData('blog-posts', { blogPosts: sortedPosts });
         actions.addRouteSharedData('/blog/', 'blog-posts', 'blog-posts');
         actions.addRouteSharedData('/ja/blog/', 'blog-posts', 'blog-posts');
+        actions.addRouteSharedData('/es-es/blog/', 'blog-posts', 'blog-posts');
       } catch (e) {
         console.log(e);
       }

@theme/plugins/code-samples.js

@@ -44,6 +44,7 @@ export function codeSamples() {
         });
         actions.addRouteSharedData('/resources/code-samples/', 'code-samples', 'code-samples');
         actions.addRouteSharedData('/ja/resources/code-samples/', 'code-samples', 'code-samples');
+        actions.addRouteSharedData('/es-es/resources/code-samples/', 'code-samples', 'code-samples');
       } catch (e) {
         console.log(e);
       }

_code-samples/batch/README.md

@@ -1,4 +1,5 @@
 # Batch
 
-Code samples showing how to create and submit a [Batch transaction](../../docs/concepts/transactions/batch-transactions.md).
-Both for simple and multi account batch transactions.
+Code samples showing how to create and submit a [Batch transaction](https://xrpl.org/docs/concepts/transactions/batch-transactions).
+
+Both for single and multi-account batch transactions.

_code-samples/batch/js/README.md

@@ -0,0 +1,301 @@
+# Send a Batch Transaction
+
+Code samples showing how to create and submit a [Batch transaction](https://xrpl.org/docs/concepts/transactions/batch-transactions) with Javascript.
+
+Both for single and multi-account batch transactions.
+
+## Single Account Batch Transaction
+
+Quick setup and usage:
+
+```sh
+npm install xrpl
+node singleAccountBatch.js
+```
+
+The script should output the following:
+
+```sh
+=== Funding new wallets from faucet... ===
+Sender: rP9EsVosrmx2HyrmLgWJpJacX5ZrVVQsim, Balance: 100 XRP
+Wallet1: rGx6SACvYEvX8SRrvTPD91UhBmJ16pxL94, Balance: 100 XRP
+Wallet2: r3qetgSfAtyCpGc4rvKNz4LX3F3urMSJJy, Balance: 100 XRP
+
+=== Creating Batch transaction... ===
+{
+  "TransactionType": "Batch",
+  "Account": "rP9EsVosrmx2HyrmLgWJpJacX5ZrVVQsim",
+  "Flags": 65536,
+  "RawTransactions": [
+    {
+      "RawTransaction": {
+        "TransactionType": "Payment",
+        "Account": "rP9EsVosrmx2HyrmLgWJpJacX5ZrVVQsim",
+        "Destination": "rGx6SACvYEvX8SRrvTPD91UhBmJ16pxL94",
+        "Amount": "2000000",
+        "Flags": 1073741824
+      }
+    },
+    {
+      "RawTransaction": {
+        "TransactionType": "Payment",
+        "Account": "rP9EsVosrmx2HyrmLgWJpJacX5ZrVVQsim",
+        "Destination": "r3qetgSfAtyCpGc4rvKNz4LX3F3urMSJJy",
+        "Amount": "5000000",
+        "Flags": 1073741824
+      }
+    }
+  ]
+}
+
+=== Submitting Batch transaction... ===
+
+Batch transaction submitted successfully!
+Result:
+ {
+  "close_time_iso": "2025-11-17T12:04:50Z",
+  "ctid": "C013313800030002",
+  "hash": "AE118213B0A183528418ABC5F14E3BFD6524020C5DB1C060157A0D3FDE15B900",
+  "ledger_hash": "621183809B68A794371C5EC6522105FF04E502C48EBDC8171B80224991E33394",
+  "ledger_index": 1257784,
+  "meta": {
+    "AffectedNodes": [
+      {
+        "ModifiedNode": {
+          "FinalFields": {
+            "Account": "rP9EsVosrmx2HyrmLgWJpJacX5ZrVVQsim",
+            "Balance": "99999996",
+            "Flags": 0,
+            "OwnerCount": 0,
+            "Sequence": 1257779
+          },
+          "LedgerEntryType": "AccountRoot",
+          "LedgerIndex": "42CC98AF0A28EDDDC7E359B5622CC5748BDE2A93E124AF5C32647ECA8F68D480",
+          "PreviousFields": {
+            "Balance": "100000000",
+            "Sequence": 1257778
+          },
+          "PreviousTxnID": "081C42DAE12001735AC4E9A7F027636DF612DB17B4BFA2333F4DB8EA0C9D1E9F",
+          "PreviousTxnLgrSeq": 1257778
+        }
+      }
+    ],
+    "TransactionIndex": 3,
+    "TransactionResult": "tesSUCCESS"
+  },
+  "tx_json": {
+    "Account": "rP9EsVosrmx2HyrmLgWJpJacX5ZrVVQsim",
+    "Fee": "4",
+    "Flags": 65536,
+    "LastLedgerSequence": 1257802,
+    "RawTransactions": [
+      {
+        "RawTransaction": {
+          "Account": "rP9EsVosrmx2HyrmLgWJpJacX5ZrVVQsim",
+          "Amount": "2000000",
+          "Destination": "rGx6SACvYEvX8SRrvTPD91UhBmJ16pxL94",
+          "Fee": "0",
+          "Flags": 1073741824,
+          "Sequence": 1257779,
+          "SigningPubKey": "",
+          "TransactionType": "Payment"
+        }
+      },
+      {
+        "RawTransaction": {
+          "Account": "rP9EsVosrmx2HyrmLgWJpJacX5ZrVVQsim",
+          "Amount": "5000000",
+          "Destination": "r3qetgSfAtyCpGc4rvKNz4LX3F3urMSJJy",
+          "Fee": "0",
+          "Flags": 1073741824,
+          "Sequence": 1257780,
+          "SigningPubKey": "",
+          "TransactionType": "Payment"
+        }
+      }
+    ],
+    "Sequence": 1257778,
+    "SigningPubKey": "ED7031CA5BA4EC745610AB495F5053F318C119E87567BE485A494773AD8ED4FBCE",
+    "TransactionType": "Batch",
+    "TxnSignature": "0610A277086943BC462C1A5F85BEB667B62B4BDA59525138B6014101C08297897A73D3D2D247CB37A06E1EA36267C53A51C0FDF32F3D8E974029BEDC41105B07",
+    "ctid": "C013313800030002",
+    "date": 816696290,
+    "ledger_index": 1257784
+  },
+  "validated": true
+}
+
+Batch transaction URL:
+https://devnet.xrpl.org/transactions/AE118213B0A183528418ABC5F14E3BFD6524020C5DB1C060157A0D3FDE15B900
+
+=== Verifying inner transactions... ===
+
+Transaction 1 hash: D18EA54D5653BBB5C87F116978822EAB7A26EDFB1D6C41910F36D7484D4890E3
+ - Status: tesSUCCESS (Ledger 1257784)
+ - Transaction URL: https://devnet.xrpl.org/transactions/D18EA54D5653BBB5C87F116978822EAB7A26EDFB1D6C41910F36D7484D4890E3
+
+Transaction 2 hash: 5660DB400F08EE5543C54D4D65824A2142F9D5AC17294A4ABF654260F129B44E
+ - Status: tesSUCCESS (Ledger 1257784)
+ - Transaction URL: https://devnet.xrpl.org/transactions/5660DB400F08EE5543C54D4D65824A2142F9D5AC17294A4ABF654260F129B44E
+
+=== Final balances ===
+Sender: rP9EsVosrmx2HyrmLgWJpJacX5ZrVVQsim, Balance: 92.999996 XRP
+Wallet1: rGx6SACvYEvX8SRrvTPD91UhBmJ16pxL94, Balance: 102 XRP
+Wallet2: r3qetgSfAtyCpGc4rvKNz4LX3F3urMSJJy, Balance: 105 XRP
+```
+
+## Multi-Account Batch Transaction
+
+```sh
+npm install xrpl
+node multiAccountBatch.js
+```
+
+The script should output the following:
+
+```sh
+=== Funding new wallets from faucet... ===
+Alice: rHpve1GL2ZXUs3NB5iU91BrXBSwb5PbBrG, Balance: 100 XRP
+Bob: r3ruQ92bqXwWxcR2w4cC1tW35og9h3UbBq, Balance: 100 XRP
+Charlie: rsi5D9bkczpbGykPxoGNBVVmFFFXGwm3QA, Balance: 100 XRP
+Third-party wallet: rfUpGXTzU3siTr4UovV6Wt86Vw3gQU4ttA, Balance: 100 XRP
+
+=== Creating Batch transaction... ===
+{
+  "TransactionType": "Batch",
+  "Account": "rfUpGXTzU3siTr4UovV6Wt86Vw3gQU4ttA",
+  "Flags": 65536,
+  "RawTransactions": [
+    {
+      "RawTransaction": {
+        "TransactionType": "Payment",
+        "Account": "rsi5D9bkczpbGykPxoGNBVVmFFFXGwm3QA",
+        "Destination": "rHpve1GL2ZXUs3NB5iU91BrXBSwb5PbBrG",
+        "Amount": "50000000",
+        "Flags": 1073741824
+      }
+    },
+    {
+      "RawTransaction": {
+        "TransactionType": "Payment",
+        "Account": "r3ruQ92bqXwWxcR2w4cC1tW35og9h3UbBq",
+        "Destination": "rHpve1GL2ZXUs3NB5iU91BrXBSwb5PbBrG",
+        "Amount": "50000000",
+        "Flags": 1073741824
+      }
+    }
+  ]
+}
+
+=== Submitting Batch transaction... ===
+
+Batch transaction submitted successfully!
+Result:
+ {
+  "close_time_iso": "2025-11-17T12:08:31Z",
+  "ctid": "C013317600000002",
+  "hash": "1299D20C6B489DA5C632AE4DBE49475DBF42D9444C7E9C109CC9B8DD0FD55FEC",
+  "ledger_hash": "E45ECF69057084CD02BA49A17E4D0C9154D33A98BB3C95A11B2EB9BE18F32C9B",
+  "ledger_index": 1257846,
+  "meta": {
+    "AffectedNodes": [
+      {
+        "ModifiedNode": {
+          "FinalFields": {
+            "Account": "rfUpGXTzU3siTr4UovV6Wt86Vw3gQU4ttA",
+            "Balance": "99999994",
+            "Flags": 0,
+            "OwnerCount": 0,
+            "Sequence": 1257845
+          },
+          "LedgerEntryType": "AccountRoot",
+          "LedgerIndex": "2D9E0A02007241C38A8DF679E7E62AA0B273E8B12A5430B7B9D99300424F0E1F",
+          "PreviousFields": {
+            "Balance": "100000000",
+            "Sequence": 1257844
+          },
+          "PreviousTxnID": "3153DE8DE922538A6BE54AA8F783CAD4B848A321AFF028D3E6DD0E80C4B9C237",
+          "PreviousTxnLgrSeq": 1257844
+        }
+      }
+    ],
+    "TransactionIndex": 0,
+    "TransactionResult": "tesSUCCESS"
+  },
+  "tx_json": {
+    "Account": "rfUpGXTzU3siTr4UovV6Wt86Vw3gQU4ttA",
+    "BatchSigners": [
+      {
+        "BatchSigner": {
+          "Account": "rsi5D9bkczpbGykPxoGNBVVmFFFXGwm3QA",
+          "SigningPubKey": "EDEB88C2868BD25BF03DB26050E16579FA6F8F9E3FF3172E0DC3DCBDA5408572EB",
+          "TxnSignature": "9508568084596147CFDCFC18A62DC298A78AD1148BA4B0EB99BEE1CD37E5555FE3930810790D5708F9739B0E3F79772012C154CA33C2280BDD5B72473C17A607"
+        }
+      },
+      {
+        "BatchSigner": {
+          "Account": "r3ruQ92bqXwWxcR2w4cC1tW35og9h3UbBq",
+          "SigningPubKey": "ED82F98DA6A3FC3E88D2EE3A5469D92C7070513BEF4DEE75CAB0BDAA81E8AE378D",
+          "TxnSignature": "A482C8747F79857530474F1677599766C0BE283CB7E2A05AACF76E61BECCA16DCE3802D2D8244FBF4546A1C0E5EB70691255E3EFD2F8AC80B55357BDAB9ACD05"
+        }
+      }
+    ],
+    "Fee": "6",
+    "Flags": 65536,
+    "LastLedgerSequence": 1257864,
+    "RawTransactions": [
+      {
+        "RawTransaction": {
+          "Account": "rsi5D9bkczpbGykPxoGNBVVmFFFXGwm3QA",
+          "Amount": "50000000",
+          "Destination": "rHpve1GL2ZXUs3NB5iU91BrXBSwb5PbBrG",
+          "Fee": "0",
+          "Flags": 1073741824,
+          "Sequence": 1257842,
+          "SigningPubKey": "",
+          "TransactionType": "Payment"
+        }
+      },
+      {
+        "RawTransaction": {
+          "Account": "r3ruQ92bqXwWxcR2w4cC1tW35og9h3UbBq",
+          "Amount": "50000000",
+          "Destination": "rHpve1GL2ZXUs3NB5iU91BrXBSwb5PbBrG",
+          "Fee": "0",
+          "Flags": 1073741824,
+          "Sequence": 1257841,
+          "SigningPubKey": "",
+          "TransactionType": "Payment"
+        }
+      }
+    ],
+    "Sequence": 1257844,
+    "SigningPubKey": "ED22A32B61EDF083315515831723BC18F8311F03886BBA375DFF46335BB7A75F0B",
+    "TransactionType": "Batch",
+    "TxnSignature": "156791D2DBFAEFC9B0AC29F2D8D0CDB25E13F92E70E6D5414FE31BD8573CA23D3F62F8B34FC1F117BD556B25E4F748095A24C4342108AB32F1B2BAFBF1443501",
+    "ctid": "C013317600000002",
+    "date": 816696511,
+    "ledger_index": 1257846
+  },
+  "validated": true
+}
+
+Batch transaction URL:
+https://devnet.xrpl.org/transactions/1299D20C6B489DA5C632AE4DBE49475DBF42D9444C7E9C109CC9B8DD0FD55FEC
+
+=== Verifying inner transactions ===
+
+Transaction 1 hash: 0F71979E3F641C980929F926640DCA886C30236ED0CD7C94B6CB36F0D42948AC
+ - Status: tesSUCCESS (Ledger 1257846)
+ - Transaction URL: https://devnet.xrpl.org/transactions/0F71979E3F641C980929F926640DCA886C30236ED0CD7C94B6CB36F0D42948AC
+
+Transaction 2 hash: BC124CB29334AA1079139A9BE186B69A0AC467797F147754E2406714854D2A50
+ - Status: tesSUCCESS (Ledger 1257846)
+ - Transaction URL: https://devnet.xrpl.org/transactions/BC124CB29334AA1079139A9BE186B69A0AC467797F147754E2406714854D2A50
+
+=== Final balances ===
+Alice: rHpve1GL2ZXUs3NB5iU91BrXBSwb5PbBrG, Balance: 200 XRP
+Bob: r3ruQ92bqXwWxcR2w4cC1tW35og9h3UbBq, Balance: 50 XRP
+Charlie: rsi5D9bkczpbGykPxoGNBVVmFFFXGwm3QA, Balance: 50 XRP
+Third-party wallet: rfUpGXTzU3siTr4UovV6Wt86Vw3gQU4ttA, Balance: 99.999994 XRP
+```

_code-samples/batch/js/multiAccountBatch.js

@@ -0,0 +1,143 @@
+/**
+ * XRP Ledger Batch Transactions Tutorial
+ *
+ * This tutorial demonstrates how to use the Batch transaction feature (XLS-56)
+ * to perform a multi-account batch transaction.
+ * Concept doc: https://xrpl.org/docs/concepts/transactions/batch-transactions
+ * Reference doc: https://xrpl.org/docs/references/protocol/transactions/types/batch
+*/
+
+import xrpl from "xrpl"
+
+const client = new xrpl.Client("wss://s.devnet.rippletest.net:51233/")
+await client.connect()
+
+// Create and fund wallets
+console.log("=== Funding new wallets from faucet... ===");
+const [
+  { wallet: alice },
+  { wallet: bob },
+  { wallet: charlie },
+  { wallet: thirdPartyWallet },
+] = await Promise.all([
+  client.fundWallet(),
+  client.fundWallet(),
+  client.fundWallet(),
+  client.fundWallet(),
+]);
+
+console.log(`Alice: ${alice.address}, Balance: ${await client.getXrpBalance(alice.address)} XRP`)
+console.log(`Bob: ${bob.address}, Balance: ${await client.getXrpBalance(bob.address)} XRP`)
+console.log(`Charlie: ${charlie.address}, Balance: ${await client.getXrpBalance(charlie.address)} XRP`)
+console.log(`Third-party wallet: ${thirdPartyWallet.address}, Balance: ${await client.getXrpBalance(thirdPartyWallet.address)} XRP`)
+
+// Create inner transactions  --------------------------------------------
+// REQUIRED: Inner transactions MUST have the tfInnerBatchTxn flag (0x40000000).
+// This marks them as part of a batch (requires Fee: 0 and empty SigningPubKey).
+
+// Transaction 1: Charlie pays Alice
+const charliePayment = {
+  TransactionType: "Payment",
+  Account: charlie.address,
+  Destination: alice.address,
+  Amount: xrpl.xrpToDrops(50),
+  Flags: xrpl.GlobalFlags.tfInnerBatchTxn // THIS IS REQUIRED
+}
+
+// Transaction 2: Bob pays Alice
+const bobPayment = {
+  TransactionType: "Payment",
+  Account: bob.address,
+  Destination: alice.address,
+  Amount: xrpl.xrpToDrops(50),
+  Flags: xrpl.GlobalFlags.tfInnerBatchTxn // THIS IS REQUIRED
+}
+
+// Send Batch transaction --------------------------------------------
+console.log("\n=== Creating Batch transaction... ===")
+const batchTx = {
+  TransactionType: "Batch",
+  Account: thirdPartyWallet.address,
+  Flags: xrpl.BatchFlags.tfAllOrNothing, // tfAllOrNothing: All inner transactions must succeed
+  // Must include a minimum of 2 transactions and a maximum of 8 transactions.
+  RawTransactions: [
+    { RawTransaction: charliePayment },
+    { RawTransaction: bobPayment },
+  ]
+}
+console.log(JSON.stringify(batchTx, null, 2))
+
+// Validate the transaction structure
+xrpl.validate(batchTx)
+
+// Set the expected number of signers, which is 2 (Bob and Charlie) in this case, for this transaction. 
+// "autofill" will automatically add Fee: "0" and SigningPubKey: "" to inner transactions.
+const autofilledBatchTx = await client.autofill(batchTx, 2)
+
+// Gather batch signatures --------------------------------
+// Each signer needs their own tx copy because signMultiBatch modifies the object.
+// Charlie signs the Batch transaction
+const charlieBatch = { ...autofilledBatchTx }
+xrpl.signMultiBatch(charlie, charlieBatch)
+
+// Bob signs the Batch transaction
+const bobBatch = { ...autofilledBatchTx }
+xrpl.signMultiBatch(bob, bobBatch)
+
+// Combine inner transaction signatures.
+// This returns a signed transaction blob (hex string) ready for submission.
+const combinedSignedTx = xrpl.combineBatchSigners([charlieBatch, bobBatch])
+
+// Submit the signed blob with the third-party's wallet
+console.log("\n=== Submitting Batch transaction... ===")
+const submitResponse = await client.submitAndWait(combinedSignedTx, 
+  { wallet: thirdPartyWallet }
+)
+
+// Check Batch transaction result --------------------------------
+if (submitResponse.result.meta.TransactionResult !== "tesSUCCESS") {
+  const resultCode = submitResponse.result.meta.TransactionResult
+  console.warn(`\nTransaction failed with result code ${resultCode}`)
+  await client.disconnect()
+  process.exit(1)
+}
+
+console.log("\nBatch transaction submitted successfully!")
+console.log("Result:\n", JSON.stringify(submitResponse.result, null, 2))
+// View the transaction on the XRPL Explorer 
+console.log(`\nBatch transaction URL:\nhttps://devnet.xrpl.org/transactions/${submitResponse.result.hash}`)
+
+// Calculate and verify inner transaction hashes --------------------------------------------
+console.log("\n=== Verifying inner transactions ===")
+const rawTransactions = submitResponse.result.tx_json.RawTransactions
+let hasFailure = false
+
+for (let i = 0; i < rawTransactions.length; i++) {
+  const innerTx = rawTransactions[i].RawTransaction
+  const hash = xrpl.hashes.hashSignedTx(innerTx)
+  console.log(`\nTransaction ${i + 1} hash: ${hash}`)
+
+  try {
+    const tx = await client.request({ command: 'tx', transaction: hash })
+    const status = tx.result.meta?.TransactionResult
+    console.log(` - Status: ${status} (Ledger ${tx.result.ledger_index})`)
+    console.log(` - Transaction URL: https://devnet.xrpl.org/transactions/${hash}`)
+  } catch (error) {
+    hasFailure = true
+    console.log(` - Transaction not found: ${error}`)
+  }
+}
+if (hasFailure) {
+  console.error("\n--- Error: One or more inner transactions failed. ---")
+  await client.disconnect()
+  process.exit(1)
+}
+
+// Verify balances after transaction
+console.log("\n=== Final balances ===")
+console.log(`Alice: ${alice.address}, Balance: ${await client.getXrpBalance(alice.address)} XRP`)
+console.log(`Bob: ${bob.address}, Balance: ${await client.getXrpBalance(bob.address)} XRP`)
+console.log(`Charlie: ${charlie.address}, Balance: ${await client.getXrpBalance(charlie.address)} XRP`)
+console.log(`Third-party wallet: ${thirdPartyWallet.address}, Balance: ${await client.getXrpBalance(thirdPartyWallet.address)} XRP`)
+
+await client.disconnect()

_code-samples/batch/js/package.json

@@ -0,0 +1,6 @@
+{
+  "dependencies": {
+    "xrpl": "^4.4.3"
+  },
+  "type": "module"
+}

_code-samples/batch/js/singleAccountBatch.js

@@ -0,0 +1,120 @@
+/**
+ * Single Account Batch Transaction Example
+ *
+ * This example demonstrates how to use the Batch transactions feature (XLS-56)
+ * to create a single-account batch transaction that sends payments
+ * to multiple destinations in one atomic operation.
+ * Concept doc: https://xrpl.org/docs/concepts/transactions/batch-transactions
+ * Reference doc: https://xrpl.org/docs/references/protocol/transactions/types/batch
+*/
+
+import xrpl from "xrpl"
+
+const client = new xrpl.Client("wss://s.devnet.rippletest.net:51233/")
+await client.connect()
+
+// Create and fund wallets
+console.log("=== Funding new wallets from faucet... ===");
+const [{ wallet: sender }, { wallet: wallet1 }, { wallet: wallet2 }] =
+  await Promise.all([
+    client.fundWallet(),
+    client.fundWallet(),
+    client.fundWallet(),
+  ]);
+
+console.log(`Sender: ${sender.address}, Balance: ${await client.getXrpBalance(sender.address)} XRP`)
+console.log(`Wallet1: ${wallet1.address}, Balance: ${await client.getXrpBalance(wallet1.address)} XRP`)
+console.log(`Wallet2: ${wallet2.address}, Balance: ${await client.getXrpBalance(wallet2.address)} XRP`)
+
+// Create inner transactions  --------------------------------------------
+// REQUIRED: Inner transactions MUST have the tfInnerBatchTxn flag (0x40000000).
+// This marks them as part of a batch (requires Fee: 0 and empty SigningPubKey).
+
+// Transaction 1
+const payment1 = {
+  TransactionType: "Payment",
+  Account: sender.address,
+  Destination: wallet1.address,
+  Amount: xrpl.xrpToDrops(2),
+  Flags: xrpl.GlobalFlags.tfInnerBatchTxn // THIS IS REQUIRED
+}
+
+// Transaction 2
+const payment2 = {
+  TransactionType: "Payment",
+  Account: sender.address,
+  Destination: wallet2.address,
+  Amount: xrpl.xrpToDrops(5),
+  Flags: xrpl.GlobalFlags.tfInnerBatchTxn // THIS IS REQUIRED
+}
+
+// Send Batch transaction --------------------------------------------
+console.log("\n=== Creating Batch transaction... ===")
+const batchTx = {
+  TransactionType: "Batch",
+  Account: sender.address,
+  Flags: xrpl.BatchFlags.tfAllOrNothing, // tfAllOrNothing: All inner transactions must succeed
+  // Must include a minimum of 2 transactions and a maximum of 8 transactions.
+  RawTransactions: [
+    { RawTransaction: payment1 }, 
+    { RawTransaction: payment2 }
+  ]
+}
+console.log(JSON.stringify(batchTx, null, 2))
+
+// Validate the transaction structure before submitting
+xrpl.validate(batchTx)
+
+// Submit and wait for validation
+console.log("\n=== Submitting Batch transaction... ===")
+const submitResponse = await client.submitAndWait(batchTx, {
+  wallet: sender,
+  // "autofill" will automatically add Fee: "0" and SigningPubKey: "" to inner transactions.
+  autofill: true
+})
+
+// Check Batch transaction result --------------------------------
+if (submitResponse.result.meta.TransactionResult !== "tesSUCCESS") {
+  const resultCode = submitResponse.result.meta.TransactionResult
+  console.warn(`\nTransaction failed with result code ${resultCode}`)
+  await client.disconnect()
+  process.exit(1)
+}
+console.log("\nBatch transaction submitted successfully!")
+console.log("Result:\n", JSON.stringify(submitResponse.result, null, 2))
+// View the batch transaction on the XRPL Explorer 
+console.log(`\nBatch transaction URL:\nhttps://devnet.xrpl.org/transactions/${submitResponse.result.hash}`)
+
+// Calculate and verify inner transaction hashes --------------------------------------------
+console.log("\n=== Verifying inner transactions... ===")
+const rawTransactions = submitResponse.result.tx_json.RawTransactions
+let hasFailure = false
+
+for (let i = 0; i < rawTransactions.length; i++) {
+  const innerTx = rawTransactions[i].RawTransaction
+  const hash = xrpl.hashes.hashSignedTx(innerTx)
+  console.log(`\nTransaction ${i + 1} hash: ${hash}`)
+
+  try {
+    const tx = await client.request({ command: 'tx', transaction: hash })
+    const status = tx.result.meta?.TransactionResult
+    console.log(` - Status: ${status} (Ledger ${tx.result.ledger_index})`)
+    console.log(` - Transaction URL: https://devnet.xrpl.org/transactions/${hash}`)
+  } catch (error) {
+    hasFailure = true
+    console.log(` - Transaction not found: ${error}`)
+  }
+}
+if (hasFailure) {
+  console.error("\n--- Error: One or more inner transactions failed. ---")
+  await client.disconnect()
+  process.exit(1)
+}
+
+// Verify balances after transaction
+console.log("\n=== Final balances ===")
+console.log(`Sender: ${sender.address}, Balance: ${await client.getXrpBalance(sender.address)} XRP`)
+console.log(`Wallet1: ${wallet1.address}, Balance: ${await client.getXrpBalance(wallet1.address)} XRP`)
+console.log(`Wallet2: ${wallet2.address}, Balance: ${await client.getXrpBalance(wallet2.address)} XRP`)
+
+await client.disconnect()

_code-samples/clawback/go/go.mod

@@ -1,8 +1,6 @@
 module github.com/XRPLF
 
-go 1.23.0
-
-toolchain go1.23.10
+go 1.24.0
 
 require github.com/Peersyst/xrpl-go v0.1.11
 
@@ -20,5 +18,5 @@ require (
 	github.com/tyler-smith/go-bip32 v1.0.0 // indirect
 	github.com/tyler-smith/go-bip39 v1.1.0 // indirect
 	github.com/ugorji/go/codec v1.2.11 // indirect
-	golang.org/x/crypto v0.35.0 // indirect
+	golang.org/x/crypto v0.45.0 // indirect
 )

_code-samples/clawback/go/go.sum

@@ -46,8 +46,8 @@ github.com/ugorji/go/codec v1.2.11/go.mod h1:UNopzCgEMSXjBc6AOMqYvWC1ktqTAfzJZUZ
 golang.org/x/crypto v0.0.0-20170613210332-850760c427c5/go.mod h1:6SG95UA2DQfeDnfUPMdvaQW0Q7yPrPDi9nlGo2tz2b4=
 golang.org/x/crypto v0.0.0-20190308221718-c2843e01d9a2/go.mod h1:djNgcEr1/C05ACkg1iLfiJU5Ep61QUkGW8qpdssI0+w=
 golang.org/x/crypto v0.0.0-20200622213623-75b288015ac9/go.mod h1:LzIPMQfyMNhhGPhUkYOs5KpL4U8rLKemX1yGLhDgUto=
-golang.org/x/crypto v0.35.0 h1:b15kiHdrGCHrP6LvwaQ3c03kgNhhiMgvlhxHQhmg2Xs=
-golang.org/x/crypto v0.35.0/go.mod h1:dy7dXNW32cAb/6/PRuTNsix8T+vJAqvuIy5Bli/x0YQ=
+golang.org/x/crypto v0.45.0 h1:jMBrvKuj23MTlT0bQEOBcAE0mjg8mK9RXFhRH6nyF3Q=
+golang.org/x/crypto v0.45.0/go.mod h1:XTGrrkGJve7CYK7J8PEww4aY7gM3qMCElcJQ8n8JdX4=
 golang.org/x/net v0.0.0-20190404232315-eb5bcb51f2a3/go.mod h1:t9HGtf8HONx5eT2rtn7q6eTqICYqUVnKs3thJo3Qplg=
 golang.org/x/sys v0.0.0-20190215142949-d0b11bdaac8a/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
 golang.org/x/sys v0.0.0-20190412213103-97732733099d/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=

_code-samples/create-amm/README.md

@@ -1,3 +1,3 @@
 # Create AMM
 
-Code samples for the [Create an Automated Market Maker tutorial](../../docs/tutorials/how-tos/use-tokens/create-an-automated-market-maker.md), showing how to make set up a new AMM.
+Code samples for the [Create an Automated Market Maker tutorial](../../docs/tutorials/dex/create-an-automated-market-maker.md), showing how to make set up a new AMM.

_code-samples/deposit-preauth/go/go.mod

@@ -1,8 +1,6 @@
 module github.com/XRPLF
 
-go 1.23.0
-
-toolchain go1.23.10
+go 1.24.0
 
 require github.com/Peersyst/xrpl-go v0.1.11
 
@@ -20,5 +18,5 @@ require (
 	github.com/tyler-smith/go-bip32 v1.0.0 // indirect
 	github.com/tyler-smith/go-bip39 v1.1.0 // indirect
 	github.com/ugorji/go/codec v1.2.11 // indirect
-	golang.org/x/crypto v0.35.0 // indirect
+	golang.org/x/crypto v0.45.0 // indirect
 )

_code-samples/deposit-preauth/go/go.sum

@@ -46,8 +46,8 @@ github.com/ugorji/go/codec v1.2.11/go.mod h1:UNopzCgEMSXjBc6AOMqYvWC1ktqTAfzJZUZ
 golang.org/x/crypto v0.0.0-20170613210332-850760c427c5/go.mod h1:6SG95UA2DQfeDnfUPMdvaQW0Q7yPrPDi9nlGo2tz2b4=
 golang.org/x/crypto v0.0.0-20190308221718-c2843e01d9a2/go.mod h1:djNgcEr1/C05ACkg1iLfiJU5Ep61QUkGW8qpdssI0+w=
 golang.org/x/crypto v0.0.0-20200622213623-75b288015ac9/go.mod h1:LzIPMQfyMNhhGPhUkYOs5KpL4U8rLKemX1yGLhDgUto=
-golang.org/x/crypto v0.35.0 h1:b15kiHdrGCHrP6LvwaQ3c03kgNhhiMgvlhxHQhmg2Xs=
-golang.org/x/crypto v0.35.0/go.mod h1:dy7dXNW32cAb/6/PRuTNsix8T+vJAqvuIy5Bli/x0YQ=
+golang.org/x/crypto v0.45.0 h1:jMBrvKuj23MTlT0bQEOBcAE0mjg8mK9RXFhRH6nyF3Q=
+golang.org/x/crypto v0.45.0/go.mod h1:XTGrrkGJve7CYK7J8PEww4aY7gM3qMCElcJQ8n8JdX4=
 golang.org/x/net v0.0.0-20190404232315-eb5bcb51f2a3/go.mod h1:t9HGtf8HONx5eT2rtn7q6eTqICYqUVnKs3thJo3Qplg=
 golang.org/x/sys v0.0.0-20190215142949-d0b11bdaac8a/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
 golang.org/x/sys v0.0.0-20190412213103-97732733099d/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=

_code-samples/get-started/go/go.mod

@@ -1,8 +1,6 @@
 module github.com/XRPLF
 
-go 1.23.0
-
-toolchain go1.23.10
+go 1.24.0
 
 require github.com/Peersyst/xrpl-go v0.1.11
 
@@ -20,5 +18,5 @@ require (
 	github.com/tyler-smith/go-bip32 v1.0.0 // indirect
 	github.com/tyler-smith/go-bip39 v1.1.0 // indirect
 	github.com/ugorji/go/codec v1.2.11 // indirect
-	golang.org/x/crypto v0.35.0 // indirect
+	golang.org/x/crypto v0.45.0 // indirect
 )

_code-samples/get-started/go/go.sum

@@ -46,8 +46,8 @@ github.com/ugorji/go/codec v1.2.11/go.mod h1:UNopzCgEMSXjBc6AOMqYvWC1ktqTAfzJZUZ
 golang.org/x/crypto v0.0.0-20170613210332-850760c427c5/go.mod h1:6SG95UA2DQfeDnfUPMdvaQW0Q7yPrPDi9nlGo2tz2b4=
 golang.org/x/crypto v0.0.0-20190308221718-c2843e01d9a2/go.mod h1:djNgcEr1/C05ACkg1iLfiJU5Ep61QUkGW8qpdssI0+w=
 golang.org/x/crypto v0.0.0-20200622213623-75b288015ac9/go.mod h1:LzIPMQfyMNhhGPhUkYOs5KpL4U8rLKemX1yGLhDgUto=
-golang.org/x/crypto v0.35.0 h1:b15kiHdrGCHrP6LvwaQ3c03kgNhhiMgvlhxHQhmg2Xs=
-golang.org/x/crypto v0.35.0/go.mod h1:dy7dXNW32cAb/6/PRuTNsix8T+vJAqvuIy5Bli/x0YQ=
+golang.org/x/crypto v0.45.0 h1:jMBrvKuj23MTlT0bQEOBcAE0mjg8mK9RXFhRH6nyF3Q=
+golang.org/x/crypto v0.45.0/go.mod h1:XTGrrkGJve7CYK7J8PEww4aY7gM3qMCElcJQ8n8JdX4=
 golang.org/x/net v0.0.0-20190404232315-eb5bcb51f2a3/go.mod h1:t9HGtf8HONx5eT2rtn7q6eTqICYqUVnKs3thJo3Qplg=
 golang.org/x/sys v0.0.0-20190215142949-d0b11bdaac8a/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
 golang.org/x/sys v0.0.0-20190412213103-97732733099d/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=

_code-samples/get-started/py/README.md

@@ -0,0 +1,62 @@
+# Get Started Using Python Library
+
+Connects to the XRP Ledger and gets account information using Python.
+
+To download the source code, see [Get Started Using Python Library](http://xrpl.org/docs/tutorials/python/build-apps/get-started).
+
+## Run the Code
+
+Quick setup and usage:
+
+```sh
+python -m venv .venv
+source .venv/bin/activate
+pip install -r requirements.txt
+python ./get-acct-info.py
+```
+
+You should see output similar to the following:
+
+```sh
+Creating a new wallet and funding it with Testnet XRP...
+Attempting to fund address ravbHNootpSNQkxyEFCWevSkHsFGDHfyop
+Faucet fund successful.
+Wallet: ravbHNootpSNQkxyEFCWevSkHsFGDHfyop
+Account Testnet Explorer URL: 
+ https://testnet.xrpl.org/accounts/ravbHNootpSNQkxyEFCWevSkHsFGDHfyop
+
+Getting account info...
+Response Status:  ResponseStatus.SUCCESS
+{
+    "account_data": {
+        "Account": "ravbHNootpSNQkxyEFCWevSkHsFGDHfyop",
+        "Balance": "100000000",
+        "Flags": 0,
+        "LedgerEntryType": "AccountRoot",
+        "OwnerCount": 0,
+        "PreviousTxnID": "3DACF2438AD39F294C4EFF6132D5D88BCB65D2F2261C7650F40AC1F6A54C83EA",
+        "PreviousTxnLgrSeq": 12039759,
+        "Sequence": 12039759,
+        "index": "148E6F4B8E4C14018D679A2526200C292BDBC5AB77611BC3AE0CB97CD2FB84E5"
+    },
+    "account_flags": {
+        "allowTrustLineClawback": false,
+        "defaultRipple": false,
+        "depositAuth": false,
+        "disableMasterKey": false,
+        "disallowIncomingCheck": false,
+        "disallowIncomingNFTokenOffer": false,
+        "disallowIncomingPayChan": false,
+        "disallowIncomingTrustline": false,
+        "disallowIncomingXRP": false,
+        "globalFreeze": false,
+        "noFreeze": false,
+        "passwordSpent": false,
+        "requireAuthorization": false,
+        "requireDestinationTag": false
+    },
+    "ledger_hash": "CA624D717C4FCDD03BAD8C193F374A77A14F7D2566354A4E9617A8DAD896DE71",
+    "ledger_index": 12039759,
+    "validated": true
+}
+```

_code-samples/get-started/py/get-acct-info.py

@@ -1,34 +1,39 @@
+# @chunk {"steps": ["connect-tag"]}
 # Define the network client
 from xrpl.clients import JsonRpcClient
+from xrpl.wallet import generate_faucet_wallet
+from xrpl.core import addresscodec
+from xrpl.models.requests.account_info import AccountInfo
+import json
+
 JSON_RPC_URL = "https://s.altnet.rippletest.net:51234/"
 client = JsonRpcClient(JSON_RPC_URL)
+# @chunk-end
 
 
-# Create a wallet using the testnet faucet:
+# @chunk {"steps": ["get-account-create-wallet-tag"]}
+# Create a wallet using the Testnet faucet:
 # https://xrpl.org/xrp-testnet-faucet.html
-from xrpl.wallet import generate_faucet_wallet
+print("\nCreating a new wallet and funding it with Testnet XRP...")
 test_wallet = generate_faucet_wallet(client, debug=True)
-
-# Create an account str from the wallet
-test_account = test_wallet.address
-
-# Derive an x-address from the classic address:
-# https://xrpaddress.info/
-from xrpl.core import addresscodec
-test_xaddress = addresscodec.classic_address_to_xaddress(test_account, tag=12345, is_test_network=True)
-print("\nClassic address:\n\n", test_account)
-print("X-address:\n\n", test_xaddress)
+test_account = test_wallet.classic_address
+print(f"Wallet: {test_account}")
+print(f"Account Testnet Explorer URL: ")
+print(f" https://testnet.xrpl.org/accounts/{test_account}")
+# @chunk-end
 
 
+# @chunk {"steps": ["query-xrpl-tag"]}
 # Look up info about your account
-from xrpl.models.requests.account_info import AccountInfo
+print("\nGetting account info...")
 acct_info = AccountInfo(
     account=test_account,
     ledger_index="validated",
     strict=True,
 )
+
 response = client.request(acct_info)
 result = response.result
-print("response.status: ", response.status)
-import json
+print("Response Status: ", response.status)
 print(json.dumps(response.result, indent=4, sort_keys=True))
+# @chunk-end

_code-samples/get-started/py/requirements.txt

@@ -0,0 +1 @@
+xrpl-py==4.3.0

_code-samples/issue-a-token/go/go.mod

@@ -1,8 +1,6 @@
 module github.com/XRPLF
 
-go 1.23.0
-
-toolchain go1.23.10
+go 1.24.0
 
 require github.com/Peersyst/xrpl-go v0.1.11
 
@@ -20,5 +18,5 @@ require (
 	github.com/tyler-smith/go-bip32 v1.0.0 // indirect
 	github.com/tyler-smith/go-bip39 v1.1.0 // indirect
 	github.com/ugorji/go/codec v1.2.11 // indirect
-	golang.org/x/crypto v0.35.0 // indirect
+	golang.org/x/crypto v0.45.0 // indirect
 )

_code-samples/issue-a-token/go/go.sum

@@ -46,8 +46,8 @@ github.com/ugorji/go/codec v1.2.11/go.mod h1:UNopzCgEMSXjBc6AOMqYvWC1ktqTAfzJZUZ
 golang.org/x/crypto v0.0.0-20170613210332-850760c427c5/go.mod h1:6SG95UA2DQfeDnfUPMdvaQW0Q7yPrPDi9nlGo2tz2b4=
 golang.org/x/crypto v0.0.0-20190308221718-c2843e01d9a2/go.mod h1:djNgcEr1/C05ACkg1iLfiJU5Ep61QUkGW8qpdssI0+w=
 golang.org/x/crypto v0.0.0-20200622213623-75b288015ac9/go.mod h1:LzIPMQfyMNhhGPhUkYOs5KpL4U8rLKemX1yGLhDgUto=
-golang.org/x/crypto v0.35.0 h1:b15kiHdrGCHrP6LvwaQ3c03kgNhhiMgvlhxHQhmg2Xs=
-golang.org/x/crypto v0.35.0/go.mod h1:dy7dXNW32cAb/6/PRuTNsix8T+vJAqvuIy5Bli/x0YQ=
+golang.org/x/crypto v0.45.0 h1:jMBrvKuj23MTlT0bQEOBcAE0mjg8mK9RXFhRH6nyF3Q=
+golang.org/x/crypto v0.45.0/go.mod h1:XTGrrkGJve7CYK7J8PEww4aY7gM3qMCElcJQ8n8JdX4=
 golang.org/x/net v0.0.0-20190404232315-eb5bcb51f2a3/go.mod h1:t9HGtf8HONx5eT2rtn7q6eTqICYqUVnKs3thJo3Qplg=
 golang.org/x/sys v0.0.0-20190215142949-d0b11bdaac8a/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
 golang.org/x/sys v0.0.0-20190412213103-97732733099d/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=

_code-samples/multisigning/go/go.mod

@@ -1,8 +1,6 @@
 module github.com/XRPLF
 
-go 1.23.0
-
-toolchain go1.23.10
+go 1.24.0
 
 require github.com/Peersyst/xrpl-go v0.1.11
 
@@ -20,5 +18,5 @@ require (
 	github.com/tyler-smith/go-bip32 v1.0.0 // indirect
 	github.com/tyler-smith/go-bip39 v1.1.0 // indirect
 	github.com/ugorji/go/codec v1.2.11 // indirect
-	golang.org/x/crypto v0.35.0 // indirect
+	golang.org/x/crypto v0.45.0 // indirect
 )

_code-samples/multisigning/go/go.sum

@@ -46,8 +46,8 @@ github.com/ugorji/go/codec v1.2.11/go.mod h1:UNopzCgEMSXjBc6AOMqYvWC1ktqTAfzJZUZ
 golang.org/x/crypto v0.0.0-20170613210332-850760c427c5/go.mod h1:6SG95UA2DQfeDnfUPMdvaQW0Q7yPrPDi9nlGo2tz2b4=
 golang.org/x/crypto v0.0.0-20190308221718-c2843e01d9a2/go.mod h1:djNgcEr1/C05ACkg1iLfiJU5Ep61QUkGW8qpdssI0+w=
 golang.org/x/crypto v0.0.0-20200622213623-75b288015ac9/go.mod h1:LzIPMQfyMNhhGPhUkYOs5KpL4U8rLKemX1yGLhDgUto=
-golang.org/x/crypto v0.35.0 h1:b15kiHdrGCHrP6LvwaQ3c03kgNhhiMgvlhxHQhmg2Xs=
-golang.org/x/crypto v0.35.0/go.mod h1:dy7dXNW32cAb/6/PRuTNsix8T+vJAqvuIy5Bli/x0YQ=
+golang.org/x/crypto v0.45.0 h1:jMBrvKuj23MTlT0bQEOBcAE0mjg8mK9RXFhRH6nyF3Q=
+golang.org/x/crypto v0.45.0/go.mod h1:XTGrrkGJve7CYK7J8PEww4aY7gM3qMCElcJQ8n8JdX4=
 golang.org/x/net v0.0.0-20190404232315-eb5bcb51f2a3/go.mod h1:t9HGtf8HONx5eT2rtn7q6eTqICYqUVnKs3thJo3Qplg=
 golang.org/x/sys v0.0.0-20190215142949-d0b11bdaac8a/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
 golang.org/x/sys v0.0.0-20190412213103-97732733099d/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=

_code-samples/partial-payment/go/go.mod

@@ -1,8 +1,6 @@
 module github.com/XRPLF
 
-go 1.23.0
-
-toolchain go1.23.10
+go 1.24.0
 
 require github.com/Peersyst/xrpl-go v0.1.11
 
@@ -20,5 +18,5 @@ require (
 	github.com/tyler-smith/go-bip32 v1.0.0 // indirect
 	github.com/tyler-smith/go-bip39 v1.1.0 // indirect
 	github.com/ugorji/go/codec v1.2.11 // indirect
-	golang.org/x/crypto v0.35.0 // indirect
+	golang.org/x/crypto v0.45.0 // indirect
 )

_code-samples/partial-payment/go/go.sum

@@ -46,8 +46,8 @@ github.com/ugorji/go/codec v1.2.11/go.mod h1:UNopzCgEMSXjBc6AOMqYvWC1ktqTAfzJZUZ
 golang.org/x/crypto v0.0.0-20170613210332-850760c427c5/go.mod h1:6SG95UA2DQfeDnfUPMdvaQW0Q7yPrPDi9nlGo2tz2b4=
 golang.org/x/crypto v0.0.0-20190308221718-c2843e01d9a2/go.mod h1:djNgcEr1/C05ACkg1iLfiJU5Ep61QUkGW8qpdssI0+w=
 golang.org/x/crypto v0.0.0-20200622213623-75b288015ac9/go.mod h1:LzIPMQfyMNhhGPhUkYOs5KpL4U8rLKemX1yGLhDgUto=
-golang.org/x/crypto v0.35.0 h1:b15kiHdrGCHrP6LvwaQ3c03kgNhhiMgvlhxHQhmg2Xs=
-golang.org/x/crypto v0.35.0/go.mod h1:dy7dXNW32cAb/6/PRuTNsix8T+vJAqvuIy5Bli/x0YQ=
+golang.org/x/crypto v0.45.0 h1:jMBrvKuj23MTlT0bQEOBcAE0mjg8mK9RXFhRH6nyF3Q=
+golang.org/x/crypto v0.45.0/go.mod h1:XTGrrkGJve7CYK7J8PEww4aY7gM3qMCElcJQ8n8JdX4=
 golang.org/x/net v0.0.0-20190404232315-eb5bcb51f2a3/go.mod h1:t9HGtf8HONx5eT2rtn7q6eTqICYqUVnKs3thJo3Qplg=
 golang.org/x/sys v0.0.0-20190215142949-d0b11bdaac8a/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
 golang.org/x/sys v0.0.0-20190412213103-97732733099d/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=

_code-samples/paths/go/go.mod

@@ -1,8 +1,6 @@
 module github.com/XRPLF
 
-go 1.23.0
-
-toolchain go1.23.10
+go 1.24.0
 
 require github.com/Peersyst/xrpl-go v0.1.11
 
@@ -20,5 +18,5 @@ require (
 	github.com/tyler-smith/go-bip32 v1.0.0 // indirect
 	github.com/tyler-smith/go-bip39 v1.1.0 // indirect
 	github.com/ugorji/go/codec v1.2.11 // indirect
-	golang.org/x/crypto v0.35.0 // indirect
+	golang.org/x/crypto v0.45.0 // indirect
 )

_code-samples/paths/go/go.sum

@@ -46,8 +46,8 @@ github.com/ugorji/go/codec v1.2.11/go.mod h1:UNopzCgEMSXjBc6AOMqYvWC1ktqTAfzJZUZ
 golang.org/x/crypto v0.0.0-20170613210332-850760c427c5/go.mod h1:6SG95UA2DQfeDnfUPMdvaQW0Q7yPrPDi9nlGo2tz2b4=
 golang.org/x/crypto v0.0.0-20190308221718-c2843e01d9a2/go.mod h1:djNgcEr1/C05ACkg1iLfiJU5Ep61QUkGW8qpdssI0+w=
 golang.org/x/crypto v0.0.0-20200622213623-75b288015ac9/go.mod h1:LzIPMQfyMNhhGPhUkYOs5KpL4U8rLKemX1yGLhDgUto=
-golang.org/x/crypto v0.35.0 h1:b15kiHdrGCHrP6LvwaQ3c03kgNhhiMgvlhxHQhmg2Xs=
-golang.org/x/crypto v0.35.0/go.mod h1:dy7dXNW32cAb/6/PRuTNsix8T+vJAqvuIy5Bli/x0YQ=
+golang.org/x/crypto v0.45.0 h1:jMBrvKuj23MTlT0bQEOBcAE0mjg8mK9RXFhRH6nyF3Q=
+golang.org/x/crypto v0.45.0/go.mod h1:XTGrrkGJve7CYK7J8PEww4aY7gM3qMCElcJQ8n8JdX4=
 golang.org/x/net v0.0.0-20190404232315-eb5bcb51f2a3/go.mod h1:t9HGtf8HONx5eT2rtn7q6eTqICYqUVnKs3thJo3Qplg=
 golang.org/x/sys v0.0.0-20190215142949-d0b11bdaac8a/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
 golang.org/x/sys v0.0.0-20190412213103-97732733099d/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=

_code-samples/send-xrp/go/go.mod

@@ -1,8 +1,6 @@
 module github.com/XRPLF
 
-go 1.23.0
-
-toolchain go1.23.10
+go 1.24.0
 
 require github.com/Peersyst/xrpl-go v0.1.11
 
@@ -20,5 +18,5 @@ require (
 	github.com/tyler-smith/go-bip32 v1.0.0 // indirect
 	github.com/tyler-smith/go-bip39 v1.1.0 // indirect
 	github.com/ugorji/go/codec v1.2.11 // indirect
-	golang.org/x/crypto v0.35.0 // indirect
+	golang.org/x/crypto v0.45.0 // indirect
 )

_code-samples/send-xrp/go/go.sum

@@ -46,8 +46,8 @@ github.com/ugorji/go/codec v1.2.11/go.mod h1:UNopzCgEMSXjBc6AOMqYvWC1ktqTAfzJZUZ
 golang.org/x/crypto v0.0.0-20170613210332-850760c427c5/go.mod h1:6SG95UA2DQfeDnfUPMdvaQW0Q7yPrPDi9nlGo2tz2b4=
 golang.org/x/crypto v0.0.0-20190308221718-c2843e01d9a2/go.mod h1:djNgcEr1/C05ACkg1iLfiJU5Ep61QUkGW8qpdssI0+w=
 golang.org/x/crypto v0.0.0-20200622213623-75b288015ac9/go.mod h1:LzIPMQfyMNhhGPhUkYOs5KpL4U8rLKemX1yGLhDgUto=
-golang.org/x/crypto v0.35.0 h1:b15kiHdrGCHrP6LvwaQ3c03kgNhhiMgvlhxHQhmg2Xs=
-golang.org/x/crypto v0.35.0/go.mod h1:dy7dXNW32cAb/6/PRuTNsix8T+vJAqvuIy5Bli/x0YQ=
+golang.org/x/crypto v0.45.0 h1:jMBrvKuj23MTlT0bQEOBcAE0mjg8mK9RXFhRH6nyF3Q=
+golang.org/x/crypto v0.45.0/go.mod h1:XTGrrkGJve7CYK7J8PEww4aY7gM3qMCElcJQ8n8JdX4=
 golang.org/x/net v0.0.0-20190404232315-eb5bcb51f2a3/go.mod h1:t9HGtf8HONx5eT2rtn7q6eTqICYqUVnKs3thJo3Qplg=
 golang.org/x/sys v0.0.0-20190215142949-d0b11bdaac8a/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
 golang.org/x/sys v0.0.0-20190412213103-97732733099d/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=

blog/2016/multisign-available.md

@@ -25,14 +25,14 @@ The Ripple Consensus Ledger's multi-signing feature also allows signers to indep
 
 1. Include the signer's address in your SignerList.
 2. Fund the signer's address in the ledger.
-3. [Assign a Regular Key Pair](/docs/tutorials/how-tos/manage-account-settings/assign-a-regular-key-pair) to the signer's address and disable its master key. (Funded addresses can only sign using their master key pair if it's not disabled.)
+3. [Assign a Regular Key Pair](/docs/tutorials/best-practices/key-management/assign-a-regular-key-pair.md) to the signer's address and disable its master key. (Funded addresses can only sign using their master key pair if it's not disabled.)
 4. Have that signer use its regular key pair to contribute to your multi-signatures.
 
 
 ## Further Reading ##
 
 - [Multi-Signing Summary](/docs/concepts/accounts/multi-signing)
-- [How to Multi-Sign](/docs/tutorials/how-tos/manage-account-settings/send-a-multi-signed-transaction)
+- [How to Multi-Sign](/docs/tutorials/best-practices/key-management/send-a-multi-signed-transaction.md)
 - [MultiSign Amendment](/resources/known-amendments.md#multisign)
 
 

blog/2016/multisign-reminder.md

@@ -12,7 +12,7 @@ markdown:
 
 The multi-signing amendment is currently supported by the majority of voting validators on Ripple, and is scheduled to become active on the protocol on Monday, **2016-06-27**. For more information, please see the multi-signing documentation in the Ripple Developer Portal:
 
-* [How to Multi-Sign](/docs/tutorials/how-tos/manage-account-settings/send-a-multi-signed-transaction)
+* [How to Multi-Sign](/docs/tutorials/best-practices/key-management/send-a-multi-signed-transaction.md)
 * [MultiSign Amendment Information](/resources/known-amendments.md#multisign)
 
 To continue receiving updates about the `rippled` server, please subscribe to the Ripple Server Google Group:

blog/2016/rippled-0.31.2-updates.md

@@ -57,5 +57,5 @@ For more information, see the following articles:
 
 * [MultiSign Amendment](/resources/known-amendments.md#multisign)
 * [Multi-Signing Overview](/docs/concepts/accounts/multi-signing)
-* [Tutorial - Set Up Multi-Signing](/docs/tutorials/how-tos/manage-account-settings/set-up-multi-signing)
-* [Tutorial - Send a Multi-Signed Transaction](/docs/tutorials/how-tos/manage-account-settings/send-a-multi-signed-transaction)
+* [Tutorial - Set Up Multi-Signing](/docs/tutorials/best-practices/key-management/set-up-multi-signing.md)
+* [Tutorial - Send a Multi-Signed Transaction](/docs/tutorials/best-practices/key-management/send-a-multi-signed-transaction.md)

blog/2019/multisignreserve-enabled.md

@@ -16,7 +16,7 @@ markdown:
 
 If you are already using multi-signing, no changes are necessary to continue using it. Optionally, you can now benefit from the reduced reserve requirements by replacing your existing SignerList with an identical or updated one.
 
-If you are not using multi-signing yet, feel free to take this opportunity to [Set Up Multi-Signing](/docs/tutorials/how-tos/manage-account-settings/set-up-multi-signing) with the reduced reserve requirements.
+If you are not using multi-signing yet, feel free to take this opportunity to [Set Up Multi-Signing](/docs/tutorials/best-practices/key-management/set-up-multi-signing.md) with the reduced reserve requirements.
 
 
 ## MultiSignReserve Summary

blog/2024/get-ready-for-amm.md

@@ -30,9 +30,9 @@ If you run a tool that parses full ledgers or transaction metadata, you need to
 
 ## Using AMM
 
-If you want to use AMM after the amendment goes live, the first step is to [Create an Automated Maker](../../docs/tutorials/how-tos/use-tokens/create-an-automated-market-maker.md) for the currency pair you want to trade. Only the first user for any given currency pair needs to do this, though; other users can deposit to the existing AMM to get in on the action.
+If you want to use AMM after the amendment goes live, the first step is to [Create an Automated Maker](../../docs/tutorials/dex/create-an-automated-market-maker.md) for the currency pair you want to trade. Only the first user for any given currency pair needs to do this, though; other users can deposit to the existing AMM to get in on the action.
 
-There are no special steps to use an AMM when trading currencies on the XRP Ledger. If you follow the standard steps to [Trade in the DEX](../../docs/tutorials/how-tos/use-tokens/trade-in-the-decentralized-exchange.md), and there's an AMM for the currency pair you're trading, your transaction automatically uses the AMM when doing so produces a better rate than consuming orders from the order book.
+There are no special steps to use an AMM when trading currencies on the XRP Ledger. If you follow the standard steps to [Trade in the DEX](../../docs/tutorials/dex/trade-in-the-decentralized-exchange.md), and there's an AMM for the currency pair you're trading, your transaction automatically uses the AMM when doing so produces a better rate than consuming orders from the order book.
 
 ## Further Reading
 

blog/2024/how-to-master-xrp-transfers.md

@@ -44,7 +44,7 @@ python3 lesson1-send-xrp.py
 
 ## Transferring XRP: A Hands-on Experience
 
-With your accounts at the ready, it's time to [send XRP payments using Python](./../../docs/tutorials/python/send-payments/index.md) back and forth. Experience the thrill of moving digital currency with just a few clicks:
+With your accounts at the ready, it's time to [send XRP payments using Python](./../../docs/tutorials/payments/create-accounts-send-xrp-in-python.md) back and forth. Experience the thrill of moving digital currency with just a few clicks:
 
 - **From Standby to Operational**: Enter the XRP amount, paste the operational account's address into the destination field, and watch the magic happen.
 - **Back to Standby**: Reverse the roles and transfer XRP from the operational account back to the standby account, completing the circle.

blog/2025/rippled-2.6.2.md

@@ -0,0 +1,70 @@
+---
+category: 2025
+date: "2025-11-19"
+template: '../../@theme/templates/blogpost'
+seo:
+    title: Introducing XRP Ledger version 2.6.2
+    description: rippled version 2.6.2 is now available. This version contains a new amendment and a critical bug fix.
+labels:
+    - rippled Release Notes
+markdown:
+    editPage:
+        hide: true
+---
+# Introducing XRP Ledger version 2.6.2
+
+Version 2.6.2 of `rippled`, the reference server implementation of the XRP Ledger protocol, is now available. This release adds a new `fixDirectoryLimit` amendment and a critical bug fix.
+
+
+## Action Required
+
+If you run an XRP Ledger server, upgrade to version 2.6.2 as soon as possible to ensure service continuity.
+
+
+## Install / Upgrade
+
+On supported platforms, see the [instructions on installing or updating `rippled`](../../docs/infrastructure/installation/index.md).
+
+| Package | SHA-256 |
+|:--------|:--------|
+| [RPM for Red Hat / CentOS (x86-64)](https://repos.ripple.com/repos/rippled-rpm/stable/rippled-2.6.2-1.el9.x86_64.rpm) | `e3b041906a75c3c52cc6423219d7ba9c199a5d736d2e3978a5ce0ac5ef693fdf` |
+| [DEB for Ubuntu / Debian (x86-64)](https://repos.ripple.com/repos/rippled-deb/pool/stable/rippled_2.6.2-1_amd64.deb) | `0887b5a77c43c362ea7680b83df40b955a5748b712924acf2212b2de29e3373b` |
+
+For other platforms, please [build from source](https://github.com/XRPLF/rippled/blob/master/BUILD.md). The most recent commit in the git log should be the change setting the version:
+
+```text
+commit df24ee077438e03673a9c6661c41e8f070b90cd9
+Author: Vladislav Vysokikh <vvysokikh@gmail.com>
+Date:   Tue Nov 18 09:28:59 2025 +0000
+
+    Version 2.6.2
+```
+
+
+## Full Changelog
+
+### Amendments
+
+The following amendment is open for voting with this release:
+
+- **fixDirectoryLimit** - Removes directory page limits. Object reserve requirements provide enough incentive to avoid creating unnecessary objects on the XRP Ledger. ([#5935](https://github.com/XRPLF/rippled/pull/5935))
+
+### Bug Fixes
+
+- Fixed an assertion failure when all the inner transactions of a `Batch` transaction were invalid. ([#5670](https://github.com/XRPLF/rippled/pull/5670))
+
+
+## Credits
+
+The following GitHub users contributed to this release:
+
+- RippleX Engineering
+- RippleX Docs
+- RippleX Product
+
+
+## Bug Bounties and Responsible Disclosures
+
+We welcome reviews of the `rippled` code and urge researchers to responsibly disclose any issues they may find.
+
+To report a bug, please send a detailed report to: <bugs@xrpl.org>

blog/sidebars.yaml

@@ -10,6 +10,7 @@
     - group: '2025'
       expanded: false
       items:
+        - page: 2025/rippled-2.6.2.md
         - page: 2025/rippled-2.6.1.md
         - page: 2025/vulnerabilitydisclosurereport-bug-sep2025.md
         - page: 2025/devnet-reset-oct.md

docs/_snippets/common-links.md

@@ -208,6 +208,7 @@
 [MPTokensV1_1 amendment]: /resources/known-amendments.md#priceoracle
 [RFC-1751]: https://tools.ietf.org/html/rfc1751
 [RequireFullyCanonicalSig amendment]: /resources/known-amendments.md#requirefullycanonicalsig
+[Require Destination Tag]: docs/tutorials/compliance-features/require-destination-tags.md
 [RippleState entry]: /docs/references/protocol/ledger-data/ledger-entry-types/ripplestate.md
 [RippleState object]: /docs/references/protocol/ledger-data/ledger-entry-types/ripplestate.md
 [SHA-512Half]: /docs/references/protocol/data-types/basic-data-types.md#hashes

docs/_snippets/post-rippled-install.md

@@ -1,6 +1,6 @@
 It can take several minutes to sync with the rest of the XRP Ledger network, during which time the server outputs various warnings. For information about log messages, see [Understanding Log Messages](../infrastructure/troubleshooting/understanding-log-messages.md).
 
-You can use the [`rippled` commandline interface](../tutorials/http-websocket-apis/build-apps/get-started.md#commandline) to see if your server is synced with the network:
+You can use the [`rippled` commandline interface](../tutorials/get-started/get-started-http-websocket-apis.md#commandline) to see if your server is synced with the network:
 
 ```sh
 rippled server_info

docs/concepts/accounts/account-types.md

@@ -74,8 +74,8 @@ If a standby address is compromised, the consequences are like an operational ad
     - [Accounts](index.md)
     - [Cryptographic Keys](cryptographic-keys.md)
 - **Tutorials:**
-    - [Assign a Regular Key Pair](../../tutorials/how-tos/manage-account-settings/assign-a-regular-key-pair.md)
-    - [Change or Remove a Regular Key Pair](../../tutorials/how-tos/manage-account-settings/change-or-remove-a-regular-key-pair.md)
+    - [Assign a Regular Key Pair](../../tutorials/best-practices/key-management/assign-a-regular-key-pair.md)
+    - [Change or Remove a Regular Key Pair](../../tutorials/best-practices/key-management/change-or-remove-a-regular-key-pair.md)
 - **References:**
     - [account_info method][]
     - [SetRegularKey transaction][]

docs/concepts/accounts/cryptographic-keys.md

@@ -90,7 +90,7 @@ The [wallet_propose method][] is one way of generating a master key pair. The re
 
 {% admonition type="danger" name="Warning" %}If a malicious actor learns your master private key (or seed), they have full control over your account, unless your master key pair is disabled. They can take all the money your account holds and do other irreparable harm. Treat your secret values with care!{% /admonition %}
 
-Because changing a master key pair is impossible, you should treat it with care proportionate to the value it holds. A good practice is to [keep your master key pair offline](../../tutorials/how-tos/manage-account-settings/offline-account-setup.md) and set up a regular key pair to sign transactions from your account instead. By keeping the master key pair enabled but offline, you can be reasonably certain that no one can get access to it using the internet, but you can still go find it to use in an emergency.
+Because changing a master key pair is impossible, you should treat it with care proportionate to the value it holds. A good practice is to [keep your master key pair offline](../../tutorials/best-practices/key-management/offline-account-setup.md) and set up a regular key pair to sign transactions from your account instead. By keeping the master key pair enabled but offline, you can be reasonably certain that no one can get access to it using the internet, but you can still go find it to use in an emergency.
 
 Keeping your master key pair offline means not putting the secret information (passphrase, seed, or private key) anywhere that malicious actors can get access to it. In general, this means it is not within reach of a computer program that interacts with the internet at large. For example, you could keep it on an air-gapped machine that never connects to the internet, on a piece of paper stored in a safe, or have it completely memorized. (Memorization has some drawbacks, though, including making it impossible to pass the key on after you are dead.)
 
@@ -121,7 +121,7 @@ A good security practice is to save your master private key somewhere offline, a
 
 Regular key pairs have the same format as master key pairs. You generate them the same way (for example, using the [wallet_propose method][]). The only difference is that a regular key pair is not intrinsically tied to the account it signs transactions for. It is possible (but not a good idea) to use the master key pair from one account as the regular key pair for another account.
 
-The [SetRegularKey transaction][] assigns or changes the regular key pair for an account. For a tutorial on assigning or changing a regular key pair, see [Assign a Regular Key Pair](../../tutorials/how-tos/manage-account-settings/assign-a-regular-key-pair.md).
+The [SetRegularKey transaction][] assigns or changes the regular key pair for an account. For a tutorial on assigning or changing a regular key pair, see [Assign a Regular Key Pair](../../tutorials/best-practices/key-management/assign-a-regular-key-pair.md).
 
 
 ## Signing Algorithms
@@ -250,8 +250,8 @@ The steps to derive the XRP Ledger's secp256k1 account key pair from a seed valu
 - **Concepts:**
     - [Issuing and Operational Addresses](account-types.md)
 - **Tutorials:**
-    - [Assign a Regular Key Pair](../../tutorials/how-tos/manage-account-settings/assign-a-regular-key-pair.md)
-    - [Change or Remove a Regular Key Pair](../../tutorials/how-tos/manage-account-settings/change-or-remove-a-regular-key-pair.md)
+    - [Assign a Regular Key Pair](../../tutorials/best-practices/key-management/assign-a-regular-key-pair.md)
+    - [Change or Remove a Regular Key Pair](../../tutorials/best-practices/key-management/change-or-remove-a-regular-key-pair.md)
 - **References:**
     - [SetRegularKey transaction][]
     - [AccountRoot ledger object](../../references/protocol/ledger-data/ledger-entry-types/accountroot.md)

docs/concepts/accounts/index.md

@@ -64,6 +64,6 @@ The typical way to get an account in the XRP Ledger is as follows:
     - [AccountRoot object](../../references/protocol/ledger-data/ledger-entry-types/accountroot.md)
 - **Tutorials:**
     - [Manage Account Settings (Category)](../../tutorials/how-tos/manage-account-settings/index.md)
-    - [Monitor Incoming Payments with WebSocket](../../tutorials/http-websocket-apis/build-apps/monitor-incoming-payments-with-websocket.md)
+    - [Monitor Incoming Payments with WebSocket](../../tutorials/advanced-developer-topics/client-library-development//monitor-incoming-payments-with-websocket.md)
 
 {% raw-partial file="/docs/_snippets/common-links.md" /%}

docs/concepts/accounts/multi-signing.md

@@ -58,7 +58,7 @@ There might be a scenario where you create a multi-signing list as a "backup pla
 
 To successfully submit a multi-signed transaction, you must do all of the following:
 
-* The address sending the transaction (specified in the `Account` field) must have a [`SignerList` object in the ledger](../../references/protocol/ledger-data/ledger-entry-types/signerlist.md). For instructions on how to do this, see [Set Up Multi-Signing](../../tutorials/how-tos/manage-account-settings/set-up-multi-signing.md).
+* The address sending the transaction (specified in the `Account` field) must have a [`SignerList` object in the ledger](../../references/protocol/ledger-data/ledger-entry-types/signerlist.md). For instructions on how to do this, see [Set Up Multi-Signing](../../tutorials/best-practices/key-management/set-up-multi-signing.md).
 * The transaction must include the `SigningPubKey` field as an empty string.
 * The transaction must include a [`Signers` field](../../references/protocol/transactions/common-fields.md#signers-field) containing an array of signatures.
 * The signatures present in the `Signers` array must match signers defined in the `SignerList`.
@@ -70,8 +70,8 @@ To successfully submit a multi-signed transaction, you must do all of the follow
 ## See Also
 
 - **Tutorials:**
-    - [Set Up Multi-Signing](../../tutorials/how-tos/manage-account-settings/set-up-multi-signing.md)
-    - [Send a Multi-Signed Transaction](../../tutorials/how-tos/manage-account-settings/send-a-multi-signed-transaction.md)
+    - [Set Up Multi-Signing](../../tutorials/best-practices/key-management/set-up-multi-signing.md)
+    - [Send a Multi-Signed Transaction](../../tutorials/best-practices/key-management/send-a-multi-signed-transaction.md)
 - **Concepts:**
     - [Cryptographic Keys](cryptographic-keys.md)
     - [Special Transaction Cost for Multi-signed transactions](../transactions/transaction-cost.md#special-transaction-costs)

docs/concepts/accounts/reserves.md

@@ -59,7 +59,7 @@ Applications can look up the current base and incremental reserve values using t
 
 To determine the owner reserve of an account, multiply the incremental reserve by the number of objects the account owns. To look up the number of objects an account owns, call the [account_info method][] and take `account_data.OwnerCount`.
 
-To calculate an address's total reserve requirement, multiply `OwnerCount` by `reserve_inc_xrp`, then add `reserve_base_xrp`. [Here is a demonstration](../../tutorials/python/build-apps/build-a-desktop-wallet-in-python.md#codeblock-17) of this calculation in Python.
+To calculate an address's total reserve requirement, multiply `OwnerCount` by `reserve_inc_xrp`, then add `reserve_base_xrp`. [Here is a demonstration](../../tutorials/sample-apps/build-a-desktop-wallet-in-python.md#codeblock-17) of this calculation in Python.
 
 
 ## Going Below the Reserve Requirement
@@ -81,6 +81,6 @@ The XRP Ledger has a mechanism to adjust the reserve requirements. Such adjustme
 - [AccountRoot Object][]
 - [Fee Voting](../consensus-protocol/fee-voting.md)
 - [SetFee pseudo-transaction][]
-- [Tutorial: Calculate and display the reserve requirement (Python)](../../tutorials/python/build-apps/build-a-desktop-wallet-in-python.md#3-display-an-account)
+- [Tutorial: Calculate and display the reserve requirement (Python)](../../tutorials/sample-apps/build-a-desktop-wallet-in-python.md#3-display-an-account)
 
 {% raw-partial file="/docs/_snippets/common-links.md" /%}

docs/concepts/accounts/tickets.md

@@ -63,7 +63,7 @@ Any account can create and use Tickets on any type of transaction. However, some
 - **Concepts:**
     - [Multi-Signing](multi-signing.md)
 - **Tutorials:**
-    - [Use Tickets](../../tutorials/how-tos/manage-account-settings/use-tickets.md)
+    - [Use Tickets](../../tutorials/best-practices/transaction-sending/use-tickets.md)
 - **References:**
     - [TicketCreate transaction][]
     - [Transaction Common Fields](../../references/protocol/transactions/common-fields.md)

docs/concepts/networks-and-servers/index.md

@@ -27,7 +27,7 @@ You need to trust the server you use. If you connect to a malicious server, ther
 * It could selectively show or hide payment paths and currency exchange offers to guarantee its own profit while not providing you the best deal.
 * If you sent it your address's secret key, it could make arbitrary transactions on your behalf, and even transfer or destroy all the money your address holds.
 
-Additionally, running your own server gives you [admin access](../../tutorials/http-websocket-apis/build-apps/get-started.md#admin-access), which allows you to run important admin-only and load-intensive commands. If you use a shared server, you have to worry about other users of the same server competing with you for the server's computing power. Many of the commands in the WebSocket API can put a lot of strain on the server, so the server has the option to scale back its responses when it needs to. If you share a server with others, you may not always get the best results possible.
+Additionally, running your own server gives you [admin access](../../tutorials/get-started/get-started-http-websocket-apis.md#admin-access), which allows you to run important admin-only and load-intensive commands. If you use a shared server, you have to worry about other users of the same server competing with you for the server's computing power. Many of the commands in the WebSocket API can put a lot of strain on the server, so the server has the option to scale back its responses when it needs to. If you share a server with others, you may not always get the best results possible.
 
 Finally, if you run a validating server, you can use a stock server as a proxy to the public network while keeping your validating server on a private network only accessible to the outside world through the stock server. This makes it more difficult to compromise the integrity of your validating server.
 

docs/concepts/networks-and-servers/rippled-server-modes.md

@@ -10,7 +10,7 @@ The `rippled` server software can run in several modes depending on its configur
 
 - [**P2P Mode**](#p2p-mode) - This is the main mode of the server: it follows the peer-to-peer network, processes transactions, and maintains some amount of [ledger history](ledger-history.md). This mode can be configured to do any or all of the following roles:
     - [**Validator**](#validators) - Helps secure the network by participating in consensus.
-    - [**API Server**](#api-servers) - Provides [API access](../../tutorials/http-websocket-apis/build-apps/get-started.md) to read data from the shared ledger, submit transactions, and watch activity in the ledger. Optionally, this can be a [**Full History Server**](#full-history-servers), which keeps a complete record of transaction and ledger history.
+    - [**API Server**](#api-servers) - Provides [API access](../../tutorials/get-started/get-started-http-websocket-apis.md) to read data from the shared ledger, submit transactions, and watch activity in the ledger. Optionally, this can be a [**Full History Server**](#full-history-servers), which keeps a complete record of transaction and ledger history.
     - [**Hub Server**](#public-hubs) - Relays messages between many other members of the peer-to-peer network.
 - [**Stand-alone mode**](#stand-alone-mode) - An offline mode for testing. Does not connect to the peer-to-peer network or use consensus.
 

docs/concepts/payment-types/checks.md

@@ -49,11 +49,11 @@ For more information about Checks in the XRP Ledger, see:
     - [CheckCash][]
     - [CheckCancel][]
 - [Checks Tutorials](../../tutorials/how-tos/use-specialized-payment-types/use-checks/index.md)
-    - [Send a Check](../../tutorials/how-tos/use-specialized-payment-types/use-checks/send-a-check.md)
-    - [Look up Checks](../../tutorials/how-tos/use-specialized-payment-types/use-checks/look-up-checks.md)
-    - [Cash a Check for an exact amount](../../tutorials/how-tos/use-specialized-payment-types/use-checks/cash-a-check-for-an-exact-amount.md)
-    - [Cash a Check for a flexible amount](../../tutorials/how-tos/use-specialized-payment-types/use-checks/cash-a-check-for-a-flexible-amount.md)
-    - [Cancel a Check](../../tutorials/how-tos/use-specialized-payment-types/use-checks/cancel-a-check.md)
+    - [Send a Check](../../tutorials/payments/send-a-check.md)
+    - [Look up Checks](../../tutorials/payments/look-up-checks.md)
+    - [Cash a Check for an exact amount](../../tutorials/payments/cash-a-check-for-an-exact-amount.md)
+    - [Cash a Check for a flexible amount](../../tutorials/payments/cash-a-check-for-a-flexible-amount.md)
+    - [Cancel a Check](../../tutorials/payments/cancel-a-check.md)
 - [Checks amendment][]
 
 For more information about related features, see:

docs/concepts/payment-types/direct-xrp-payments.md

@@ -39,8 +39,8 @@ The basis of any financial system is transferring value. The quickest and simple
 ## See Also
 
 - **Tutorials:**
-    - [Send XRP (Interactive Tutorial)](../../tutorials/how-tos/send-xrp.md)
-    - [Monitor Incoming Payments with WebSocket](../../tutorials/http-websocket-apis/build-apps/monitor-incoming-payments-with-websocket.md)
+    - [Send XRP (Interactive Tutorial)](../../tutorials/payments/send-xrp)
+    - [Monitor Incoming Payments with WebSocket](../../tutorials/advanced-developer-topics/client-library-development//monitor-incoming-payments-with-websocket.md)
 - **References:**
     - [Payment transaction][]
     - [Transaction Results](../../references/protocol/transactions/transaction-results/index.md)

docs/concepts/payment-types/partial-payments.md

@@ -130,7 +130,7 @@ Using [the `delivered_amount` field](#the-delivered_amount-field) when processin
     - [Transactions](../transactions/index.md)
 - **Tutorials:**
     - [Look Up Transaction Results](../transactions/finality-of-results/look-up-transaction-results.md)
-    - [Monitor Incoming Payments with WebSocket](../../tutorials/http-websocket-apis/build-apps/monitor-incoming-payments-with-websocket.md)
+    - [Monitor Incoming Payments with WebSocket](../../tutorials/advanced-developer-topics/client-library-development/monitor-incoming-payments-with-websocket.md)
     - [Use Specialized Payment Types](../../tutorials/how-tos/use-specialized-payment-types/index.md)
     - [List XRP as an Exchange](../../use-cases/defi/list-xrp-as-an-exchange.md)
 - **References:**

docs/concepts/tokens/fungible-tokens/multi-purpose-tokens.md

@@ -196,7 +196,7 @@ The data type that holds MPT balances has a valid range of **0** to **2<sup>63</
 
 - **Tutorial**
 
-    - [Sending MPTs](../../../tutorials/javascript/send-payments/sending-mpts.md)
+    - [Sending MPTs](../../../tutorials/tokens/sending-mpts-in-javascript.md)
 
 - **References:**
     - [MPToken](../../../references/protocol/ledger-data/ledger-entry-types/mptoken.md)

docs/concepts/tokens/nfts/guaranteeing-a-fixed-supply.md

@@ -16,7 +16,7 @@ To guarantee a fixed number of NFTs:
 1. Use `AccountSet` to assign your operational wallet as an authorized minter for the issuer. See [Authorizing Another Account to Mint Your NFTs](authorizing-another-minter.md).
 1. Use your operational account to mint the tokens using `NFTokenMint`. The operational wallet holds all of the tokens minted for the Issuer. See [Batch Minting](batch-minting.md).
 1.  Use `AccountSet` to remove your operational wallet as an authorized minter for the Issuer.
-1. “Blackhole” the Issuer account. See [Disable Master Key Pair](../../../tutorials/how-tos/manage-account-settings/disable-master-key-pair.md).
+1. “Blackhole” the Issuer account. See [Disable Master Key Pair](../../../tutorials/best-practices/key-management/disable-master-key-pair.md).
 
 At this point, it is impossible for any new tokens to be minted with the issuer’s address as the issuing account.
 

docs/concepts/transactions/finality-of-results/look-up-transaction-results.md

@@ -454,7 +454,7 @@ Most other transactions create a specific type of ledger entry and [adjust the s
     - [Finality of Results](index.md)
     - [Reliable Transaction Submission](../reliable-transaction-submission.md)
 - **Tutorials:**
-    - [Monitor Incoming Payments with WebSocket](../../../tutorials/http-websocket-apis/build-apps/monitor-incoming-payments-with-websocket.md)
+    - [Monitor Incoming Payments with WebSocket](../../../tutorials/advanced-developer-topics/client-library-development/monitor-incoming-payments-with-websocket.md)
 - **References:**
     - [Ledger Entry Types Reference](../../../references/protocol/ledger-data/ledger-entry-types/index.md) - All possible fields of all types of ledger entries
     - [Transaction Metadata](../../../references/protocol/transactions/metadata.md) - Summary of the metadata format and fields that appear in metadata

docs/concepts/transactions/index.md

@@ -65,7 +65,7 @@ Sending a transaction to the XRP Ledger involves several steps:
 5. The servers apply those transactions to the previous ledger in a canonical order and share their results.
 6. If enough [trusted validators](../networks-and-servers/rippled-server-modes.md#validators) created the exact same ledger, that ledger is declared _validated_ and the [results of the transactions](../../references/protocol/transactions/transaction-results/index.md) in that ledger are immutable.
 
-See [Send XRP](../../tutorials/how-tos/send-xrp.md) for an interactive tutorial in sending XRP payments.
+See [Send XRP](../../tutorials/payments/send-xrp) for an interactive tutorial in sending XRP payments.
 
 
 ### Example Unsigned Transaction
@@ -207,9 +207,9 @@ Example response from the `tx` command:
     - [Payment Types](../payment-types/index.md)
 - **Tutorials:**
     - [Set Up Secure Signing](secure-signing.md)
-    - [Send XRP](../../tutorials/how-tos/send-xrp.md)
+    - [Send XRP](../../tutorials/payments/send-xrp)
     - [Look Up Transaction Results](finality-of-results/look-up-transaction-results.md)
-    - [Monitor Incoming Payments with WebSocket](../../tutorials/http-websocket-apis/build-apps/monitor-incoming-payments-with-websocket.md)
+    - [Monitor Incoming Payments with WebSocket](../../tutorials/advanced-developer-topics/client-library-development/monitor-incoming-payments-with-websocket.md)
     - [Cancel or Skip a Transaction](finality-of-results/canceling-a-transaction.md)
     - [Reliable Transaction Submission](reliable-transaction-submission.md)
 - **References:**

docs/concepts/transactions/reliable-transaction-submission.md

@@ -170,7 +170,7 @@ The difference between the two transaction failure cases (labeled (1) and (2) in
 
         {% admonition type="success" name="Tip" %}The [`AccountTxnID` field](../../references/protocol/transactions/common-fields.md#accounttxnid) can help prevent redundant transactions from succeeding in this situation.{% /admonition %}
 
-    - A malicious actor may have used your secret key to send a transaction. If this is the case, [rotate your key pair](../../tutorials/how-tos/manage-account-settings/change-or-remove-a-regular-key-pair.md) if you can, and check for other transactions sent. You should also audit your network to determine if the secret key was part of a larger intrusion or security leak. When you successfully rotate your key pair and are certain that the malicious actor no longer has access to your accounts and systems, you can resume normal activities.
+    - A malicious actor may have used your secret key to send a transaction. If this is the case, [rotate your key pair](../../tutorials/best-practices/key-management/change-or-remove-a-regular-key-pair.md) if you can, and check for other transactions sent. You should also audit your network to determine if the secret key was part of a larger intrusion or security leak. When you successfully rotate your key pair and are certain that the malicious actor no longer has access to your accounts and systems, you can resume normal activities.
 
 
 #### Ledger Gaps

docs/concepts/transactions/secure-signing.md

@@ -47,7 +47,7 @@ In this configuration, you run `rippled` on the machine that generates the trans
 
     The [example config file](https://github.com/XRPLF/rippled/blob/8429dd67e60ba360da591bfa905b58a35638fda1/cfg/rippled-example.cfg#L1050-L1073) listens for connections on the local loopback network (127.0.0.1), with JSON-RPC (HTTP) on port 5005 and WebSocket (WS) on port 6006, and treats all connected clients as admin.
 
-    {% admonition type="warning" name="Caution" %}Using the [commandline API](../../references/http-websocket-apis/api-conventions/request-formatting.md#commandline-format) for signatures is less secure than [using the Websocket or JSON-RPC APIs](../../tutorials/http-websocket-apis/build-apps/get-started.md) through non-commandline clients. When using the commandline syntax, your secret key may be visible to other users in the system's process listing, and your shell history may save the key in plain text.{% /admonition %}
+    {% admonition type="warning" name="Caution" %}Using the [commandline API](../../references/http-websocket-apis/api-conventions/request-formatting.md#commandline-format) for signatures is less secure than [using the Websocket or JSON-RPC APIs](../../tutorials/get-started/get-started-http-websocket-apis.md) through non-commandline clients. When using the commandline syntax, your secret key may be visible to other users in the system's process listing, and your shell history may save the key in plain text.{% /admonition %}
 
 3. Maintain the server to keep it running, updated, and in sync with the network while you're using it.
 
@@ -140,7 +140,7 @@ To use this configuration, follow the steps for [running `rippled` on a private
     - [Multi-Signing](../accounts/multi-signing.md)
 - **Tutorials:**
     - [Install rippled](../../infrastructure/installation/index.md)
-    - [Assign a Regular Key Pair](../../tutorials/how-tos/manage-account-settings/assign-a-regular-key-pair.md)
+    - [Assign a Regular Key Pair](../../tutorials/best-practices/key-management/assign-a-regular-key-pair.md)
     - [Reliable Transaction Submission](reliable-transaction-submission.md)
     - [Enable Public Signing](../../infrastructure/configuration/enable-public-signing.md)
 - **References:**

docs/concepts/transactions/source-and-destination-tags.md

@@ -42,12 +42,12 @@ Assigning tags in numerical order provides less privacy to customers. Since all
 
 ## Requiring Tags
 
-For an XRP Ledger address that may receive payments intended for several customer accounts, receiving a payment _without_ a destination tag can be a problem: it is not immediately obvious which customer to credit, which can require a manual intervention and a discussion with the sender to figure out who was the intended recipient. To reduce cases like this, you can [enable the `RequireDest` setting](../../tutorials/how-tos/manage-account-settings/require-destination-tags.md). That way, if a user forgets to include a destination tag in a payment, the XRP Ledger rejects their payment instead of giving you money you don't know what to do with. The user can then send the payment again, using the tag as they should have.
+For an XRP Ledger address that may receive payments intended for several customer accounts, receiving a payment _without_ a destination tag can be a problem: it is not immediately obvious which customer to credit, which can require a manual intervention and a discussion with the sender to figure out who was the intended recipient. To reduce cases like this, you can [enable the `RequireDest` setting](../../tutorials/compliance-features/require-destination-tags.md). That way, if a user forgets to include a destination tag in a payment, the XRP Ledger rejects their payment instead of giving you money you don't know what to do with. The user can then send the payment again, using the tag as they should have.
 
 
 ## See Also
 
-- [Require Destination Tags](../../tutorials/how-tos/manage-account-settings/require-destination-tags.md)
+- [Require Destination Tags](../../tutorials/compliance-features/require-destination-tags.md)
 - [Payment Types](../payment-types/index.md)
 
 {% raw-partial file="/docs/_snippets/common-links.md" /%}

docs/concepts/transactions/transaction-cost.md

@@ -54,7 +54,7 @@ This divides transactions into roughly three categories:
 
 ## Local Load Cost
 
-Each `rippled` server maintains a cost threshold based on its current load. If you submit a transaction with a `Fee` value that is lower than current load-based transaction cost of the `rippled` server, that server neither applies nor relays the transaction. (**Note:** If you submit a transaction through an [admin connection](../../tutorials/http-websocket-apis/build-apps/get-started.md), the server applies and relays the transaction as long as the transaction meets the un-scaled minimum transaction cost.) A transaction is very unlikely to survive [the consensus process](../consensus-protocol/index.md) unless its `Fee` value meets the requirements of a majority of servers.
+Each `rippled` server maintains a cost threshold based on its current load. If you submit a transaction with a `Fee` value that is lower than current load-based transaction cost of the `rippled` server, that server neither applies nor relays the transaction. (**Note:** If you submit a transaction through an [admin connection](../../tutorials/get-started/get-started-http-websocket-apis.md), the server applies and relays the transaction as long as the transaction meets the un-scaled minimum transaction cost.) A transaction is very unlikely to survive [the consensus process](../consensus-protocol/index.md) unless its `Fee` value meets the requirements of a majority of servers.
 
 ## Open Ledger Cost
 

docs/infrastructure/configuration/configure-amendment-voting.md

@@ -9,7 +9,7 @@ labels:
 ---
 # Configure Amendment Voting
 
-Servers configured as validators can vote on [amendments](../../concepts/networks-and-servers/amendments.md) to the XRP Ledger protocol using the [feature method][]. (This method requires [admin access](../../tutorials/http-websocket-apis/build-apps/get-started.md#admin-access).)
+Servers configured as validators can vote on [amendments](../../concepts/networks-and-servers/amendments.md) to the XRP Ledger protocol using the [feature method][]. (This method requires [admin access](../../tutorials/get-started/get-started-http-websocket-apis.md#admin-access).)
 
 For example, to vote against the "SHAMapV2" amendment, run the following command:
 

docs/infrastructure/configuration/configure-grpc.md

@@ -47,7 +47,7 @@ To enable gRPC on your server, complete the following steps:
     - [XRP Ledger Overview](/about/)
     - [`rippled` Server Modes](../../concepts/networks-and-servers/rippled-server-modes.md)
 - **Tutorials:**
-    - [Get Started Using HTTP / WebSocket APIs](../../tutorials/http-websocket-apis/build-apps/get-started.md)
+    - [Get Started Using HTTP / WebSocket APIs](../../tutorials/get-started/get-started-http-websocket-apis.md)
     - [Reliable Transaction Submission](../../concepts/transactions/reliable-transaction-submission.md)
     - [Manage the rippled Server](../installation/install-rippled-on-ubuntu.md)
 - **References:**

docs/infrastructure/configuration/data-retention/configure-advisory-deletion.md

@@ -57,7 +57,7 @@ To configure advisory deletion with a daily schedule, perform the following step
 
 2. Test running the [can_delete method][] to prompt the server to run online deletion.
 
-    You can use the [`rippled` commandline interface](../../../tutorials/http-websocket-apis/build-apps/get-started.md#commandline) to run this command. For example:
+    You can use the [`rippled` commandline interface](../../../tutorials/get-started/get-started-http-websocket-apis.md#commandline) to run this command. For example:
 
     ```
     $ rippled --conf=/etc/opt/ripple/rippled.cfg can_delete now

docs/infrastructure/configuration/enable-public-signing.md

@@ -11,7 +11,7 @@ labels:
 
 By default, the signing methods for [`rippled`](../../concepts/networks-and-servers/index.md) are limited to [administrative connections](../../references/http-websocket-apis/admin-api-methods/index.md). If you want to allow signing methods to be used as public API methods (like with versions of `rippled` before v1.1.0), you can enable it with a configuration change.
 
-This enables the following methods to be used on "public" [JSON-RPC and WebSocket connections](../../tutorials/http-websocket-apis/build-apps/get-started.md), if your server accepts them:
+This enables the following methods to be used on "public" [JSON-RPC and WebSocket connections](../../tutorials/get-started/get-started-http-websocket-apis.md), if your server accepts them:
 
 - [sign][sign method]
 - [sign_for][sign_for method]
@@ -51,8 +51,8 @@ To enable public signing, perform the following steps:
     - [Cryptographic Keys](../../concepts/accounts/cryptographic-keys.md)
 - **Tutorials:**
     - [Set Up Secure Signing](../../concepts/transactions/secure-signing.md)
-    - [Get Started Using HTTP / WebSocket APIs](../../tutorials/http-websocket-apis/build-apps/get-started.md)
-    - [Get Started Using JavaScript](../../tutorials/javascript/build-apps/get-started.md)
+    - [Get Started Using HTTP / WebSocket APIs](../../tutorials/get-started/get-started-http-websocket-apis.md)
+    - [Get Started Using JavaScript](../../tutorials/get-started/get-started-javascript.md)
 - **References:**
     - [sign method][]
     - [sign_for method][]

docs/infrastructure/installation/install-rippled-on-rhel.md

@@ -109,7 +109,7 @@ Before you install `rippled`, you must meet the [System Requirements](system-req
 - **Tutorials:**
     - [Configure rippled](../configuration/index.md)
     - [Troubleshoot rippled](../troubleshooting/index.md)
-    - [Get Started with the rippled API](../../tutorials/http-websocket-apis/build-apps/get-started.md)
+    - [Get Started with the rippled API](../../tutorials/get-started/get-started-http-websocket-apis.md)
 - **References:**
     - [rippled API Reference](../../references/http-websocket-apis/index.md)
         - [`rippled` Commandline Usage](../commandline-usage.md)

docs/infrastructure/installation/install-rippled-on-ubuntu.md

@@ -143,7 +143,7 @@ Before you install `rippled`, you must meet the [System Requirements](system-req
 - **Tutorials:**
     - [Configure rippled](../configuration/index.md)
     - [Troubleshoot rippled](../troubleshooting/index.md)
-    - [Get Started with the rippled API](../../tutorials/http-websocket-apis/build-apps/get-started.md)
+    - [Get Started with the rippled API](../../tutorials/get-started/get-started-http-websocket-apis.md)
 - **References:**
     - [rippled API Reference](../../references/http-websocket-apis/index.md)
         - [`rippled` Commandline Usage](../commandline-usage.md)

docs/infrastructure/troubleshooting/fix-sqlite-tx-db-page-size-issue.md

@@ -183,7 +183,7 @@ To migrate your transaction database to a larger page size, perform the followin
 
 11. Confirm that the `rippled` service started successfully.
 
-    You can use the [commandline interface](../../tutorials/http-websocket-apis/build-apps/get-started.md#commandline) to check the server status (unless you have configured your server not to accept JSON-RPC requests). For example:
+    You can use the [commandline interface](../../tutorials/get-started/get-started-http-websocket-apis.md#commandline) to check the server status (unless you have configured your server not to accept JSON-RPC requests). For example:
 
     ```
     /opt/ripple/bin/rippled server_info

docs/infrastructure/troubleshooting/understanding-log-messages.md

@@ -127,7 +127,7 @@ The entry contains the IP address of the client that exceeded its rate limit, an
 
 If you see frequent messages from the same IP address, you may want to block those IP addresses from your network to reduce the load on your server's public API. (For example, you may be able to configure your firewall to block those IP addresses.)
 
-To avoid being dropped by rate limiting on your own server, [connect as an admin](../../tutorials/http-websocket-apis/build-apps/get-started.md#admin-access).
+To avoid being dropped by rate limiting on your own server, [connect as an admin](../../tutorials/get-started/get-started-http-websocket-apis.md#admin-access).
 
 ## InboundLedger 11 timeouts for ledger
 

docs/references/client-libraries.md

@@ -13,12 +13,12 @@ These client libraries simplify some of the common work of accessing and process
 
 | Language                        | Library Name              | Get Started | API Reference | Source Code |
 |---------------------------------|---------------------------|-------------|--------------|-------------|
-| **Python**                      | `xrpl-py`                 | [Get Started Using Python](../tutorials/python/build-apps/get-started.md) | [API Reference](https://xrpl-py.readthedocs.io/) | [Repo](https://github.com/XRPLF/xrpl-py) |
-| **Go**                      | `xrpl-go`                 | [Get Started Using Go](../tutorials/go/build-apps/get-started.md) | [API Reference](https://pkg.go.dev/github.com/Peersyst/xrpl-go) | [Repo](https://github.com/Peersyst/xrpl-go) |
-| **JavaScript** / **TypeScript** | `xrpl.js`                 | [Get Started](../tutorials/javascript/build-apps/get-started.md) |  [API Reference](https://js.xrpl.org/) | [Repo](https://github.com/XRPLF/xrpl.js) |
+| **Python**                      | `xrpl-py`                 | [Get Started Using Python](../tutorials/get-started/get-started-python.md) | [API Reference](https://xrpl-py.readthedocs.io/) | [Repo](https://github.com/XRPLF/xrpl-py) |
+| **Go**                      | `xrpl-go`                 | [Get Started Using Go](../tutorials/get-started/get-started-go.md) | [API Reference](https://pkg.go.dev/github.com/Peersyst/xrpl-go) | [Repo](https://github.com/Peersyst/xrpl-go) |
+| **JavaScript** / **TypeScript** | `xrpl.js`                 | [Get Started](../tutorials/get-started/get-started-javascript.md) |  [API Reference](https://js.xrpl.org/) | [Repo](https://github.com/XRPLF/xrpl.js) |
 | **JavaScript** / **TypeScript** | `xrpl-client`             | [Get Started](https://jsfiddle.net/WietseWind/35az6p1b/) |  [NPM Reference](https://www.npmjs.com/package/xrpl-client) | [Repo](https://github.com/XRPL-Labs/xrpl-client) |
 | **JavaScript** / **TypeScript** | `xrpl-accountlib`         | [Get Started](https://jsfiddle.net/WietseWind/gkefpnu0/) |  [NPM Reference](https://www.npmjs.com/package/xrpl-accountlib) | [Repo](https://github.com/WietseWind/xrpl-accountlib) |
 | **C++**                         | `rippled` Signing Library | [Get Started](https://github.com/XRPLF/rippled/tree/develop/Builds/linux#signing-library) |  | (Part of [`rippled`](https://github.com/XRPLF/rippled/)) |
-| **Java**                        | `xrpl4j`                  | [Get Started Using Java](../tutorials/java/build-apps/get-started.md) | [API Reference](https://javadoc.io/doc/org.xrpl/) | [Repo](https://github.com/XRPLF/xrpl4j) |
-| **PHP**                         | `XRPL_PHP`                | [Get Started Using PHP](../tutorials/php/build-apps/get-started.md) | [XRPL_PHP Docs](https://alexanderbuzz.github.io/xrpl-php-docs/) | [Repo](https://github.com/AlexanderBuzz/xrpl-php) |
+| **Java**                        | `xrpl4j`                  | [Get Started Using Java](../tutorials/get-started/get-started-java.md) | [API Reference](https://javadoc.io/doc/org.xrpl/) | [Repo](https://github.com/XRPLF/xrpl4j) |
+| **PHP**                         | `XRPL_PHP`                | [Get Started Using PHP](../tutorials/get-started/get-started-php.md) | [XRPL_PHP Docs](https://alexanderbuzz.github.io/xrpl-php-docs/) | [Repo](https://github.com/AlexanderBuzz/xrpl-php) |
 | **Ruby**                         | `XRPB`                |  | [XRPB Docs](https://www.rubydoc.info/gems/xrbp) | [Repo](https://github.com/DevNullProd/XRBP) |

docs/references/data-api.md

@@ -16,6 +16,6 @@ For information on the old Data API, see the [rippled-historical-database reposi
 
 ## Alternatives
 
-For most common operations, like requesting account balances or transaction history, you can query a self-hosted or [public XRP Ledger server](../tutorials/public-servers.md) using a [WebSocket connection](../tutorials/http-websocket-apis/build-apps/get-started.md#websocket-api) or [JSON-RPC (HTTP POST)](../tutorials/http-websocket-apis/build-apps/get-started.md#json-rpc).
+For most common operations, like requesting account balances or transaction history, you can query a self-hosted or [public XRP Ledger server](../tutorials/public-servers.md) using a [WebSocket connection](../tutorials/get-started/get-started-http-websocket-apis.md#websocket-api) or [JSON-RPC (HTTP POST)](../tutorials/get-started/get-started-http-websocket-apis.md#json-rpc).
 
-See the [Get Started Using HTTP / WebSocket APIs](../tutorials/http-websocket-apis/build-apps/get-started.md) page for more information.
+See the [Get Started Using HTTP / WebSocket APIs](../tutorials/get-started/get-started-http-websocket-apis.md) page for more information.

docs/references/http-websocket-apis/admin-api-methods/index.md

@@ -8,7 +8,7 @@ labels:
 
 Administer a `rippled` server using these admin API methods. Admin methods are meant only for trusted personnel in charge of keeping the server operational. Admin methods include commands for managing, monitoring, and debugging the server.
 
-Admin commands are available only if you connect to `rippled` on a host and port that the `rippled.cfg` file identifies as admin. By default, the commandline client uses an admin connection. For more information on connecting to `rippled`, see [Getting Started with the `rippled` API](../../../tutorials/http-websocket-apis/build-apps/get-started.md).
+Admin commands are available only if you connect to `rippled` on a host and port that the `rippled.cfg` file identifies as admin. By default, the commandline client uses an admin connection. For more information on connecting to `rippled`, see [Getting Started with the `rippled` API](../../../tutorials/get-started/get-started-http-websocket-apis.md).
 
 
 ## [Key Generation Methods](key-generation-methods/index.md)
@@ -45,7 +45,7 @@ Use these methods to sign transactions.
 * **[`sign_for`](signing-methods/sign_for.md)** - Contribute to a multi-signature.
 * **[`channel_authorize`](../public-api-methods/payment-channel-methods/channel_authorize.md)** - Sign a claim for money from a payment channel.
 
-By default, these methods are [admin-only](../../../tutorials/http-websocket-apis/build-apps/get-started.md#admin-access). They can be used as public methods if the server admin has [enabled public signing](../../../infrastructure/configuration/enable-public-signing.md).
+By default, these methods are [admin-only](../../../tutorials/get-started/get-started-http-websocket-apis.md#admin-access). They can be used as public methods if the server admin has [enabled public signing](../../../infrastructure/configuration/enable-public-signing.md).
 
 ## [Peer Management Methods](peer-management-methods/index.md)
 

docs/references/http-websocket-apis/admin-api-methods/key-generation-methods/validation_create.md

@@ -1,14 +1,12 @@
 ---
-html: validation_create.html
-parent: key-generation-methods.html
 seo:
     description: Generate keys for a rippled server to identify itself to the network.
 labels:
-  - Security
-  - Core Server
+    - Security
+    - Core Server
 ---
 # validation_create
-[[Source]](https://github.com/XRPLF/rippled/blob/315a8b6b602798a4cff4d8e1911936011e12abdb/src/ripple/rpc/handlers/ValidationCreate.cpp "Source")
+[[Source]](https://github.com/XRPLF/rippled/blob/master/src/xrpld/rpc/handlers/ValidationCreate.cpp "Source")
 
 Use the `validation_create` command to generate [cryptographic keys a `rippled` server can use to identify itself to the network](../../../../concepts/networks-and-servers/peer-protocol.md#node-key-pair). Similar to the [wallet_propose method][], this method only generates a set of keys in the proper format. It does not any makes changes to the XRP Ledger data or server configuration.
 
@@ -16,7 +14,7 @@ _The `validation_create` method is an [admin method](../index.md) that cannot be
 
 You can configure your server to use the generated key pair to sign validations (validation key pair) or regular peer-to-peer communications ([node key pair](../../../../concepts/networks-and-servers/peer-protocol.md#node-key-pair)).
 
-{% admonition type="success" name="Tip" %}For configuring a robust validator, you should use the `validator-keys` tool (included in the `rippled` RPM) to generate validator tokens (which can be rotated) with an offline master key. For more information, see [Validator Setup](../../../../infrastructure/configuration/server-modes/run-rippled-as-a-validator.md#3-enable-validation-on-your-rippled-server).{% /admonition %}
+{% admonition type="success" name="Tip" %}For configuring a robust validator, you should use the `validator-keys` tool (included in the `rippled` package build) to generate validator tokens (which can be rotated) with an offline master key. For more information, see [Validator Setup](../../../../infrastructure/configuration/server-modes/run-rippled-as-a-validator.md#3-enable-validation-on-your-rippled-server).{% /admonition %}
 
 
 ### Request Format

docs/references/http-websocket-apis/admin-api-methods/key-generation-methods/wallet_propose.md

@@ -1,21 +1,17 @@
 ---
-html: wallet_propose.html
-parent: key-generation-methods.html
 seo:
     description: Generate keys for a new account.
 labels:
-  - Security
-  - Accounts
+    - Security
+    - Accounts
 ---
 # wallet_propose
-[[Source]](https://github.com/XRPLF/rippled/blob/master/src/ripple/rpc/handlers/WalletPropose.cpp "Source")
+[[Source]](https://github.com/XRPLF/rippled/blob/master/src/xrpld/rpc/handlers/WalletPropose.cpp "Source")
 
-Use the `wallet_propose` method to generate a key pair and XRP Ledger address. This command only generates key and address values, and does not affect the XRP Ledger itself in any way. To become a funded address stored in the ledger, the address must [receive a Payment transaction](../../../../concepts/accounts/index.md#creating-accounts) that provides enough XRP to meet the [reserve requirement](../../../../concepts/accounts/reserves.md).
+Use the `wallet_propose` method to generate a key pair and XRP Ledger address. This command only generates key and address values, and does not affect the XRP Ledger itself in any way. To become a funded account in the ledger, the address must [receive a Payment transaction](../../../../concepts/accounts/index.md#creating-accounts) that provides enough XRP to meet the [reserve requirement](../../../../concepts/accounts/reserves.md).
 
 *The `wallet_propose` method is an [admin method](../index.md) that cannot be run by unprivileged users!* (This command is restricted to protect against people sniffing network traffic for account secrets, since admin commands are not usually transmitted over the outside network.)
 
-{% badge href="https://github.com/XRPLF/rippled/releases/tag/0.31.0" %}Updated in: rippled 0.31.0{% /badge %}
-
 ### Request Format
 
 An example of the request format:

docs/references/http-websocket-apis/admin-api-methods/logging-and-data-management-methods/can_delete.md

@@ -1,13 +1,11 @@
 ---
-html: can_delete.html
-parent: logging-and-data-management-methods.html
 seo:
     description: Allow online deletion of ledgers up to a specific ledger.
 labels:
-  - Data Retention
+    - Data Retention
 ---
 # can_delete
-[[Source]](https://github.com/XRPLF/rippled/blob/master/src/ripple/rpc/handlers/CanDelete.cpp "Source")
+[[Source]](https://github.com/XRPLF/rippled/blob/master/src/xrpld/rpc/handlers/CanDelete.cpp "Source")
 
 The `can_delete` method informs the `rippled` server of the latest ledger version which may be deleted when using [online deletion with advisory deletion enabled](../../../../infrastructure/configuration/data-retention/online-deletion.md#advisory-deletion). If advisory deletion is not enabled, this method does nothing.
 

docs/references/http-websocket-apis/admin-api-methods/logging-and-data-management-methods/ledger_cleaner.md

@@ -1,15 +1,13 @@
 ---
-html: ledger_cleaner.html
-parent: logging-and-data-management-methods.html
 seo:
     description: Configure the ledger cleaner service to check for corrupted data.
 labels:
-  - Data Retention
+    - Data Retention
 ---
 # ledger_cleaner
-[[Source]](https://github.com/XRPLF/rippled/blob/df54b47cd0957a31837493cd69e4d9aade0b5055/src/ripple/rpc/handlers/LedgerCleaner.cpp "Source")
+[[Source]](https://github.com/XRPLF/rippled/blob/master/src/xrpld/rpc/handlers/LedgerCleanerHandler.cpp "Source")
 
-The `ledger_cleaner` command controls the [Ledger Cleaner](https://github.com/XRPLF/rippled/blob/f313caaa73b0ac89e793195dcc2a5001786f916f/src/ripple/app/ledger/README.md#the-ledger-cleaner), an asynchronous maintenance process that can find and repair corruption in `rippled`'s database of ledgers.
+The `ledger_cleaner` command controls the [Ledger Cleaner](https://github.com/XRPLF/rippled/tree/master/src/xrpld/app/ledger#the-ledger-cleaner), an asynchronous maintenance process that can find and repair corruption in `rippled`'s database of ledgers.
 
 _The `ledger_cleaner` method is an [admin method](../index.md) that cannot be run by unprivileged users._
 

docs/references/http-websocket-apis/admin-api-methods/logging-and-data-management-methods/ledger_request.md

@@ -1,13 +1,11 @@
 ---
-html: ledger_request.html
-parent: logging-and-data-management-methods.html
 seo:
     description: Query peer servers for a specific ledger version.
 labels:
-  - Data Retention
+    - Data Retention
 ---
 # ledger_request
-[[Source]](https://github.com/XRPLF/rippled/blob/e980e69eca9ea843d200773eb1f43abe3848f1a0/src/ripple/rpc/handlers/LedgerRequest.cpp "Source")
+[[Source]](https://github.com/XRPLF/rippled/blob/master/src/xrpld/rpc/handlers/LedgerRequest.cpp "Source")
 
 The `ledger_request` command tells server to fetch a specific ledger version from its connected peers. This only works if one of the server's immediately-connected peers has that ledger. You may need to run the command several times to completely fetch a ledger.
 
@@ -61,7 +59,7 @@ Loading: "/etc/rippled.cfg"
 Connecting to 127.0.0.1:5005
 
 {
-   "result" : {
+    "result" : {
       "acquiring" : {
          "hash" : "01DDD89B6605E20338B8EEB8EB2B0E0DD2F685A2B164F3790C4D634B5734CC26",
          "have_header" : false,
@@ -76,7 +74,7 @@ Connecting to 127.0.0.1:5005
          "ledger_index" : 18851277
       },
       "status" : "error"
-   }
+    }
 }
 ```
 {% /tab %}
@@ -87,43 +85,43 @@ Loading: "/etc/rippled.cfg"
 Connecting to 127.0.0.1:5005
 
 {
-   "result" : {
-      "hash" : "EB68B5B4F6F06BF59B6D7532BCB98BB98E2F10C2435D895217AA0AA7E910FBD5",
-      "have_header" : true,
-      "have_state" : false,
-      "have_transactions" : false,
-      "needed_state_hashes" : [
-         "C46F7B9E795135447AF24BAF999AB8FC1612A997F6EAAF8B784C226FF0BD8E25",
-         "E48F528E4FC2A1DC492C6264B27B420E2285B2A3ECF3A253DB480DA5BFB7F858",
-         "B62CD0B2E1277F78BC279FA037F3F747587299B60D23A551C3F63DD137DC0CF8",
-         "30014C55701FB8426E496A47B297BEC9E8F5BFA47763CC22DBD9024CC81D39DD",
-         "7EB59A853913898FCEA7B701637F33B1054BD36C32A0B910B612EFB9CDFF6334",
-         "07ECAD3066D62583883979A2FADAADC8F7D89FA07375843C8A47452639AB2421",
-         "97A87E5246AF78463485CB27E08D561E22AAF33D5E2F08FE2FACAE0D05CB5478",
-         "50A0525E238629B32324C9F59B4ECBEFE3C21DC726DB9AB3B6758BD1838DFF68",
-         "8C541B1ED47C9282E2A28F0B7F3DDFADF06644CAB71B15A3E67D04C5FAFE9BF4",
-         "2C6CC536C778D8C0F601E35DA7DD9888C288897E4F603E76357CE2F47E8A7A9F",
-         "309E78DEC67D5725476A59E114850556CC693FB6D92092997ADE97E3EFF473CC",
-         "8EFF61B6A636AF6B4314CAC0C08F4FED0759E1F782178A822EDE98275E5E4B10",
-         "9535645E5D249AC0B6126005B79BB981CBA00286E00154D20A3BCF65743EA3CA",
-         "69F5D6FCB41D1E6CEA5ADD42CBD194086B45E957D497DF7AEE62ADAD485660CE",
-         "07E93A95DBB0B8A00925DE0DF6D27E41CACC77EF75055A89815006109D82EAD3",
-         "7FDF25F660235DCAD649676E3E6729DF920A9B0B4B6A3B090A3C64D7BDE2FB20"
-      ],
-      "needed_transaction_hashes" : [
-         "BA914854F2F5EDFCBD6E3E0B168E5D4CD0FC92927BEE408C6BD38D4F52505A34",
-         "AE3A2DB537B01EB33BB3A677242DE52C9AE0A64BD9222EE55E52855276E7EA2A",
-         "E145F737B255D93769673CBA6DEBA4F6AC7387A309DAACC72EA5B07ECF03C215",
-         "073A118552AA60E1D3C6BE6F65E4AFA01C582D9C41CCC2887244C19D9BFA7741",
-         "562DB8580CD3FE19AF5CEA61C2858C10091151B924DBF2AEB7CBB8722E683204",
-         "437C0D1C2391057079E9539CF028823D29E6437A965284F6E54CEBF1D25C5D56",
-         "1F069486AF5533883609E5C8DB907E97273D9A782DF26F5E5811F1C42ED63A3D",
-         "CAA6B7DA68EBA71254C218C81A9EA029A179694BDD0D75A49FB03A7D57BCEE49"
-      ],
-      "peers" : 6,
-      "status" : "success",
-      "timeouts" : 1
-   }
+  "result" : {
+    "hash" : "EB68B5B4F6F06BF59B6D7532BCB98BB98E2F10C2435D895217AA0AA7E910FBD5",
+    "have_header" : true,
+    "have_state" : false,
+    "have_transactions" : false,
+    "needed_state_hashes" : [
+        "C46F7B9E795135447AF24BAF999AB8FC1612A997F6EAAF8B784C226FF0BD8E25",
+        "E48F528E4FC2A1DC492C6264B27B420E2285B2A3ECF3A253DB480DA5BFB7F858",
+        "B62CD0B2E1277F78BC279FA037F3F747587299B60D23A551C3F63DD137DC0CF8",
+        "30014C55701FB8426E496A47B297BEC9E8F5BFA47763CC22DBD9024CC81D39DD",
+        "7EB59A853913898FCEA7B701637F33B1054BD36C32A0B910B612EFB9CDFF6334",
+        "07ECAD3066D62583883979A2FADAADC8F7D89FA07375843C8A47452639AB2421",
+        "97A87E5246AF78463485CB27E08D561E22AAF33D5E2F08FE2FACAE0D05CB5478",
+        "50A0525E238629B32324C9F59B4ECBEFE3C21DC726DB9AB3B6758BD1838DFF68",
+        "8C541B1ED47C9282E2A28F0B7F3DDFADF06644CAB71B15A3E67D04C5FAFE9BF4",
+        "2C6CC536C778D8C0F601E35DA7DD9888C288897E4F603E76357CE2F47E8A7A9F",
+        "309E78DEC67D5725476A59E114850556CC693FB6D92092997ADE97E3EFF473CC",
+        "8EFF61B6A636AF6B4314CAC0C08F4FED0759E1F782178A822EDE98275E5E4B10",
+        "9535645E5D249AC0B6126005B79BB981CBA00286E00154D20A3BCF65743EA3CA",
+        "69F5D6FCB41D1E6CEA5ADD42CBD194086B45E957D497DF7AEE62ADAD485660CE",
+        "07E93A95DBB0B8A00925DE0DF6D27E41CACC77EF75055A89815006109D82EAD3",
+        "7FDF25F660235DCAD649676E3E6729DF920A9B0B4B6A3B090A3C64D7BDE2FB20"
+    ],
+    "needed_transaction_hashes" : [
+        "BA914854F2F5EDFCBD6E3E0B168E5D4CD0FC92927BEE408C6BD38D4F52505A34",
+        "AE3A2DB537B01EB33BB3A677242DE52C9AE0A64BD9222EE55E52855276E7EA2A",
+        "E145F737B255D93769673CBA6DEBA4F6AC7387A309DAACC72EA5B07ECF03C215",
+        "073A118552AA60E1D3C6BE6F65E4AFA01C582D9C41CCC2887244C19D9BFA7741",
+        "562DB8580CD3FE19AF5CEA61C2858C10091151B924DBF2AEB7CBB8722E683204",
+        "437C0D1C2391057079E9539CF028823D29E6437A965284F6E54CEBF1D25C5D56",
+        "1F069486AF5533883609E5C8DB907E97273D9A782DF26F5E5811F1C42ED63A3D",
+        "CAA6B7DA68EBA71254C218C81A9EA029A179694BDD0D75A49FB03A7D57BCEE49"
+    ],
+    "peers" : 6,
+    "status" : "success",
+    "timeouts" : 1
+  }
 }
 ```
 {% /tab %}
@@ -134,26 +132,26 @@ Loading: "/etc/rippled.cfg"
 Connecting to 127.0.0.1:5005
 
 {
-   "result" : {
-      "ledger" : {
-         "accepted" : true,
-         "account_hash" : "84EBB27D9510AD5B9A3A328201921B3FD418D4A349E85D3DC69E33C7B506407F",
-         "close_time" : 486691300,
-         "close_time_human" : "2015-Jun-04 00:01:40",
-         "close_time_resolution" : 10,
-         "closed" : true,
-         "hash" : "DCF5D723ECEE1EF56D2B0024CD9BDFF2D8E3DC211BD2B9460165922564ACD863",
-         "ledger_hash" : "DCF5D723ECEE1EF56D2B0024CD9BDFF2D8E3DC211BD2B9460165922564ACD863",
-         "ledger_index" : "13840000",
-         "parent_hash" : "8A3F6FBC62C11DE4538D969F9C7966234635FE6CEB1133DDC37220978F8100A9",
-         "seqNum" : "13840000",
-         "totalCoins" : "99999022883526403",
-         "total_coins" : "99999022883526403",
-         "transaction_hash" : "3D759EF3AF1AE2F78716A8CCB2460C3030F82687E54206E883703372B9E1770C"
-      },
-      "ledger_index" : 13840000,
-      "status" : "success"
-   }
+  "result" : {
+    "ledger" : {
+        "accepted" : true,
+        "account_hash" : "84EBB27D9510AD5B9A3A328201921B3FD418D4A349E85D3DC69E33C7B506407F",
+        "close_time" : 486691300,
+        "close_time_human" : "2015-Jun-04 00:01:40",
+        "close_time_resolution" : 10,
+        "closed" : true,
+        "hash" : "DCF5D723ECEE1EF56D2B0024CD9BDFF2D8E3DC211BD2B9460165922564ACD863",
+        "ledger_hash" : "DCF5D723ECEE1EF56D2B0024CD9BDFF2D8E3DC211BD2B9460165922564ACD863",
+        "ledger_index" : "13840000",
+        "parent_hash" : "8A3F6FBC62C11DE4538D969F9C7966234635FE6CEB1133DDC37220978F8100A9",
+        "seqNum" : "13840000",
+        "totalCoins" : "99999022883526403",
+        "total_coins" : "99999022883526403",
+        "transaction_hash" : "3D759EF3AF1AE2F78716A8CCB2460C3030F82687E54206E883703372B9E1770C"
+    },
+    "ledger_index" : 13840000,
+    "status" : "success"
+  }
 }
 
 ```

docs/references/http-websocket-apis/admin-api-methods/logging-and-data-management-methods/log_level.md

@@ -1,13 +1,11 @@
 ---
-html: log_level.html
-parent: logging-and-data-management-methods.html
 seo:
-    description: Get or modify log verbosity.
+   description: Get or modify log verbosity.
 labels:
-  - Data Retention
+   - Data Retention
 ---
 # log_level
-[[Source]](https://github.com/XRPLF/rippled/blob/155fcdbcd0b4927152892c8c8be01d9cf62bed68/src/ripple/rpc/handlers/LogLevel.cpp "Source")
+[[Source]](https://github.com/XRPLF/rippled/blob/master/src/xrpld/rpc/handlers/LogLevel.cpp "Source")
 
 The `log_level` command changes the `rippled` server's logging verbosity, or returns the current logging level for each category (called a _partition_) of log messages.
 
@@ -21,10 +19,10 @@ An example of the request format:
 {% tab label="WebSocket" %}
 ```json
 {
-    "id": "ll1",
-    "command": "log_level",
-    "severity": "debug",
-    "partition": "PathRequest"
+   "id": "ll1",
+   "command": "log_level",
+   "severity": "debug",
+   "partition": "PathRequest"
 }
 ```
 {% /tab %}

docs/references/http-websocket-apis/admin-api-methods/logging-and-data-management-methods/logrotate.md

@@ -1,13 +1,11 @@
 ---
-html: logrotate.html
-parent: logging-and-data-management-methods.html
 seo:
-    description: Reopen the log file.
+   description: Reopen the log file.
 labels:
-  - Data Retention
+   - Data Retention
 ---
 # logrotate
-[[Source]](https://github.com/XRPLF/rippled/blob/743bd6c9175c472814448ea889413be79dfd1c07/src/ripple/rpc/handlers/LogRotate.cpp "Source")
+[[Source]](https://github.com/XRPLF/rippled/blob/master/src/xrpld/rpc/handlers/LogRotate.cpp "Source")
 
 The `logrotate` command closes and reopens the log file. This is intended to help with log rotation on Linux file systems.
 
@@ -49,8 +47,8 @@ An example of the request format:
 {% tab label="WebSocket" %}
 ```json
 {
-    "id": "lr1",
-    "command": "logrotate"
+   "id": "lr1",
+   "command": "logrotate"
 }
 ```
 {% /tab %}

docs/references/http-websocket-apis/admin-api-methods/peer-management-methods/connect.md

@@ -1,15 +1,13 @@
 ---
-html: connect.html
-parent: peer-management-methods.html
 seo:
     description: Force the rippled server to connect to a specific peer.
 labels:
-  - Core Server
+    - Core Server
 ---
 # connect
-[[Source]](https://github.com/XRPLF/rippled/blob/a61ffab3f9010d8accfaa98aa3cacc7d38e74121/src/ripple/rpc/handlers/Connect.cpp "Source")
+[[Source]](https://github.com/XRPLF/rippled/blob/master/src/xrpld/rpc/handlers/Connect.cpp "Source")
 
-The `connect` command forces the `rippled` server to connect to a specific peer `rippled` server.
+The `connect` command forces the `rippled` server to connect to a specific peer server.
 
 *The `connect` method is an [admin method](../index.md) that cannot be run by unprivileged users!*
 

docs/references/http-websocket-apis/admin-api-methods/peer-management-methods/peer_reservations_add.md

@@ -1,13 +1,11 @@
 ---
-html: peer_reservations_add.html
-parent: peer-management-methods.html
 seo:
     description: Add a reserved slot for a specific peer server.
 labels:
-  - Core Server
+    - Core Server
 ---
 # peer_reservations_add
-[[Source]](https://github.com/XRPLF/rippled/blob/4a1148eb2849513dd1e7ae080288fd47ab57a376/src/ripple/rpc/handlers/Reservations.cpp#L36 "Source")
+[[Source]](https://github.com/XRPLF/rippled/blob/master/src/xrpld/rpc/handlers/Reservations.cpp "Source")
 
 The {% code-page-name /%} method adds or updates a reserved slot for a specific peer server in the XRP Ledger [peer-to-peer network](../../../../concepts/networks-and-servers/peer-protocol.md).
 

docs/references/http-websocket-apis/admin-api-methods/peer-management-methods/peer_reservations_del.md

@@ -1,13 +1,11 @@
 ---
-html: peer_reservations_del.html
-parent: peer-management-methods.html
 seo:
     description: Remove a reserved slot for a specific peer server.
 labels:
-  - Core Server
+    - Core Server
 ---
 # peer_reservations_del
-[[Source]](https://github.com/XRPLF/rippled/blob/4a1148eb2849513dd1e7ae080288fd47ab57a376/src/ripple/rpc/handlers/Reservations.cpp#L89 "Source")
+[[Source]](https://github.com/XRPLF/rippled/blob/master/src/xrpld/rpc/handlers/Reservations.cpp "Source")
 
 The {% code-page-name /%} method removes a specific [peer reservation][], if one exists.
 
@@ -83,13 +81,13 @@ An example of a successful response:
 {% tab label="JSON-RPC" %}
 ```json
 {
-   "result" : {
-      "previous" : {
-         "description" : "Ripple s1 server 'WOOL'",
-         "node" : "n9Jt8awsPzWLjBCNKVEEDQnw4bQEPjezfcQ4gttD1UzbLT1FoG99"
-      },
-      "status" : "success"
-   }
+  "result" : {
+    "previous" : {
+        "description" : "Ripple s1 server 'WOOL'",
+        "node" : "n9Jt8awsPzWLjBCNKVEEDQnw4bQEPjezfcQ4gttD1UzbLT1FoG99"
+    },
+    "status" : "success"
+  }
 }
 ```
 {% /tab %}
@@ -100,13 +98,13 @@ Loading: "/etc/rippled.cfg"
 Connecting to 127.0.0.1:5005
 
 {
-   "result" : {
-      "previous" : {
-         "description" : "Ripple s1 server 'WOOL'",
-         "node" : "n9Jt8awsPzWLjBCNKVEEDQnw4bQEPjezfcQ4gttD1UzbLT1FoG99"
-      },
-      "status" : "success"
-   }
+  "result" : {
+    "previous" : {
+        "description" : "Ripple s1 server 'WOOL'",
+        "node" : "n9Jt8awsPzWLjBCNKVEEDQnw4bQEPjezfcQ4gttD1UzbLT1FoG99"
+    },
+    "status" : "success"
+  }
 }
 ```
 {% /tab %}

docs/references/http-websocket-apis/admin-api-methods/peer-management-methods/peer_reservations_list.md

@@ -1,13 +1,11 @@
 ---
-html: peer_reservations_list.html
-parent: peer-management-methods.html
 seo:
     description: List reserved slots for specific peer servers.
 labels:
-  - Core Server
+    - Core Server
 ---
 # peer_reservations_list
-[[Source]](https://github.com/XRPLF/rippled/blob/4a1148eb2849513dd1e7ae080288fd47ab57a376/src/ripple/rpc/handlers/Reservations.cpp#L116 "Source")
+[[Source]](https://github.com/XRPLF/rippled/blob/master/src/xrpld/rpc/handlers/Reservations.cpp "Source")
 
 The {% code-page-name /%} method lists [peer reservations][].
 
@@ -32,7 +30,7 @@ An example of the request format:
 {% tab label="JSON-RPC" %}
 ```json
 {
-    "method": "{% $frontmatter.seo.title %}"
+  "method": "{% $frontmatter.seo.title %}"
 }
 ```
 {% /tab %}

docs/references/http-websocket-apis/admin-api-methods/peer-management-methods/peers.md

@@ -1,13 +1,11 @@
 ---
-html: peers.html
-parent: peer-management-methods.html
 seo:
     description: Get information about the peer servers connected.
 labels:
-  - Core Server
+    - Core Server
 ---
 # peers
-[[Source]](https://github.com/XRPLF/rippled/blob/52f298f150fc1530d201d3140c80d3eaf781cb5f/src/ripple/rpc/handlers/Peers.cpp "Source")
+[[Source]](https://github.com/XRPLF/rippled/blob/master/src/xrpld/rpc/handlers/Peers.cpp "Source")
 
 The `peers` command returns a list of all other `rippled` servers currently connected to this one over the [Peer Protocol](../../../../concepts/networks-and-servers/peer-protocol.md), including information on their connection and sync status.
 
@@ -183,90 +181,90 @@ An example of a successful response:
 {% tab label="JSON-RPC" %}
 ```json
 {
-   "result" : {
-      "cluster" : {},
-      "peers" : [
-         {
-            "address" : "50.22.123.222:51235",
-            "complete_ledgers" : "32570 - 51815097",
-            "ledger" : "223DB74FE021AB1A4AA9E1CC588E0DBCC3FC7C080B93C01C30C246D89F951EA2",
-            "load" : 7,
-            "metrics" : {
-               "avg_bps_recv" : "1152",
-               "avg_bps_sent" : "332",
-               "total_bytes_recv" : "96601",
-               "total_bytes_sent" : "45322"
-            },
-            "public_key" : "n9LbkoB9ReSbaA9SGL317fm6CvjLcFG8hGoierLYfwiCDsEXHcP3",
-            "uptime" : 1,
-            "version" : "rippled-1.3.1"
-         },
-         {
-            "address" : "212.83.147.67:51235",
-            "complete_ledgers" : "51815014 - 51815040",
-            "ledger" : "223DB74FE021AB1A4AA9E1CC588E0DBCC3FC7C080B93C01C30C246D89F951EA2",
-            "load" : 1,
-            "metrics" : {
-               "avg_bps_recv" : "0",
-               "avg_bps_sent" : "1490",
-               "total_bytes_recv" : "18348",
-               "total_bytes_sent" : "46013"
-            },
-            "public_key" : "n94s5V53w1g4HdEdHdUU1FVrqHTVDbcb7bt44ib9JcM3c281LoDr",
-            "sanity" : "unknown",
-            "uptime" : 2,
-            "version" : "rippled-1.3.1"
-         },
-         {
-            "address" : "158.69.24.50:51235",
-            "complete_ledgers" : "51478098 - 51815098",
-            "ledger" : "223DB74FE021AB1A4AA9E1CC588E0DBCC3FC7C080B93C01C30C246D89F951EA2",
-            "load" : 55,
-            "metrics" : {
-               "avg_bps_recv" : "88080",
-               "avg_bps_sent" : "2703",
-               "total_bytes_recv" : "2786780",
-               "total_bytes_sent" : "89368"
-            },
-            "public_key" : "n9KfEhmmdxmjJdpbpRHGJ9ezoNzdyUepA11cT71jmq1fMDsZAcSh",
-            "uptime" : 3,
-            "version" : "rippled-1.3.1"
-         },
-         {
-            "address" : "[::ffff:174.64.99.193]:51235",
-            "complete_ledgers" : "51813091 - 51815091",
-            "latency" : 16000,
-            "ledger" : "CF72319DC762355C92BDD29E4CE066CEB03FF2A077A511D586B9FD7B74F55D94",
-            "load" : 325,
-            "metrics" : {
-               "avg_bps_recv" : "19012",
-               "avg_bps_sent" : "52053",
-               "total_bytes_recv" : "586809",
-               "total_bytes_sent" : "1678192"
-            },
-            "public_key" : "n9MH4Xu8FYPPoUFs679NQp7F6epFznM7x6bF4sAJWQvKkPBUHgd3",
-            "uptime" : 26,
-            "version" : "rippled-1.4.0-b8"
-         },
-         {
-            "address" : "[::ffff:94.237.45.66]:51235",
-            "complete_ledgers" : "51814966 - 51815093",
-            "latency" : 8773,
-            "ledger" : "61CF015A709122917B001367EE81E5E0D56E485A0BCAB53785A1CB830E0F9589",
-            "load" : 3522,
-            "metrics" : {
-               "avg_bps_recv" : "368875",
-               "avg_bps_sent" : "59308",
-               "total_bytes_recv" : "11558753",
-               "total_bytes_sent" : "2257872"
-            },
-            "public_key" : "n9Lg83FYh8YDivG9TcgXhq5Y3PwunmRqVfvibd19Ko9uu3DtqLBM",
-            "uptime" : 37,
-            "version" : "rippled-1.3.1"
-         }
-      ],
-      "status" : "success"
-   }
+  "result" : {
+    "cluster" : {},
+    "peers" : [
+        {
+          "address" : "50.22.123.222:51235",
+          "complete_ledgers" : "32570 - 51815097",
+          "ledger" : "223DB74FE021AB1A4AA9E1CC588E0DBCC3FC7C080B93C01C30C246D89F951EA2",
+          "load" : 7,
+          "metrics" : {
+              "avg_bps_recv" : "1152",
+              "avg_bps_sent" : "332",
+              "total_bytes_recv" : "96601",
+              "total_bytes_sent" : "45322"
+          },
+          "public_key" : "n9LbkoB9ReSbaA9SGL317fm6CvjLcFG8hGoierLYfwiCDsEXHcP3",
+          "uptime" : 1,
+          "version" : "rippled-1.3.1"
+        },
+        {
+          "address" : "212.83.147.67:51235",
+          "complete_ledgers" : "51815014 - 51815040",
+          "ledger" : "223DB74FE021AB1A4AA9E1CC588E0DBCC3FC7C080B93C01C30C246D89F951EA2",
+          "load" : 1,
+          "metrics" : {
+              "avg_bps_recv" : "0",
+              "avg_bps_sent" : "1490",
+              "total_bytes_recv" : "18348",
+              "total_bytes_sent" : "46013"
+          },
+          "public_key" : "n94s5V53w1g4HdEdHdUU1FVrqHTVDbcb7bt44ib9JcM3c281LoDr",
+          "sanity" : "unknown",
+          "uptime" : 2,
+          "version" : "rippled-1.3.1"
+        },
+        {
+          "address" : "158.69.24.50:51235",
+          "complete_ledgers" : "51478098 - 51815098",
+          "ledger" : "223DB74FE021AB1A4AA9E1CC588E0DBCC3FC7C080B93C01C30C246D89F951EA2",
+          "load" : 55,
+          "metrics" : {
+              "avg_bps_recv" : "88080",
+              "avg_bps_sent" : "2703",
+              "total_bytes_recv" : "2786780",
+              "total_bytes_sent" : "89368"
+          },
+          "public_key" : "n9KfEhmmdxmjJdpbpRHGJ9ezoNzdyUepA11cT71jmq1fMDsZAcSh",
+          "uptime" : 3,
+          "version" : "rippled-1.3.1"
+        },
+        {
+          "address" : "[::ffff:174.64.99.193]:51235",
+          "complete_ledgers" : "51813091 - 51815091",
+          "latency" : 16000,
+          "ledger" : "CF72319DC762355C92BDD29E4CE066CEB03FF2A077A511D586B9FD7B74F55D94",
+          "load" : 325,
+          "metrics" : {
+              "avg_bps_recv" : "19012",
+              "avg_bps_sent" : "52053",
+              "total_bytes_recv" : "586809",
+              "total_bytes_sent" : "1678192"
+          },
+          "public_key" : "n9MH4Xu8FYPPoUFs679NQp7F6epFznM7x6bF4sAJWQvKkPBUHgd3",
+          "uptime" : 26,
+          "version" : "rippled-1.4.0-b8"
+        },
+        {
+          "address" : "[::ffff:94.237.45.66]:51235",
+          "complete_ledgers" : "51814966 - 51815093",
+          "latency" : 8773,
+          "ledger" : "61CF015A709122917B001367EE81E5E0D56E485A0BCAB53785A1CB830E0F9589",
+          "load" : 3522,
+          "metrics" : {
+              "avg_bps_recv" : "368875",
+              "avg_bps_sent" : "59308",
+              "total_bytes_recv" : "11558753",
+              "total_bytes_sent" : "2257872"
+          },
+          "public_key" : "n9Lg83FYh8YDivG9TcgXhq5Y3PwunmRqVfvibd19Ko9uu3DtqLBM",
+          "uptime" : 37,
+          "version" : "rippled-1.3.1"
+        }
+    ],
+    "status" : "success"
+  }
 }
 
 ```
@@ -278,90 +276,90 @@ Loading: "/etc/rippled.cfg"
 Connecting to 127.0.0.1:5005
 
 {
-   "result" : {
-      "cluster" : {},
-      "peers" : [
-         {
-            "address" : "50.22.123.222:51235",
-            "complete_ledgers" : "32570 - 51815097",
-            "ledger" : "223DB74FE021AB1A4AA9E1CC588E0DBCC3FC7C080B93C01C30C246D89F951EA2",
-            "load" : 7,
-            "metrics" : {
-               "avg_bps_recv" : "1152",
-               "avg_bps_sent" : "332",
-               "total_bytes_recv" : "96601",
-               "total_bytes_sent" : "45322"
-            },
-            "public_key" : "n9LbkoB9ReSbaA9SGL317fm6CvjLcFG8hGoierLYfwiCDsEXHcP3",
-            "uptime" : 1,
-            "version" : "rippled-1.3.1"
-         },
-         {
-            "address" : "212.83.147.67:51235",
-            "complete_ledgers" : "51815014 - 51815040",
-            "ledger" : "223DB74FE021AB1A4AA9E1CC588E0DBCC3FC7C080B93C01C30C246D89F951EA2",
-            "load" : 1,
-            "metrics" : {
-               "avg_bps_recv" : "0",
-               "avg_bps_sent" : "1490",
-               "total_bytes_recv" : "18348",
-               "total_bytes_sent" : "46013"
-            },
-            "public_key" : "n94s5V53w1g4HdEdHdUU1FVrqHTVDbcb7bt44ib9JcM3c281LoDr",
-            "sanity" : "unknown",
-            "uptime" : 2,
-            "version" : "rippled-1.3.1"
-         },
-         {
-            "address" : "158.69.24.50:51235",
-            "complete_ledgers" : "51478098 - 51815098",
-            "ledger" : "223DB74FE021AB1A4AA9E1CC588E0DBCC3FC7C080B93C01C30C246D89F951EA2",
-            "load" : 55,
-            "metrics" : {
-               "avg_bps_recv" : "88080",
-               "avg_bps_sent" : "2703",
-               "total_bytes_recv" : "2786780",
-               "total_bytes_sent" : "89368"
-            },
-            "public_key" : "n9KfEhmmdxmjJdpbpRHGJ9ezoNzdyUepA11cT71jmq1fMDsZAcSh",
-            "uptime" : 3,
-            "version" : "rippled-1.3.1"
-         },
-         {
-            "address" : "[::ffff:174.64.99.193]:51235",
-            "complete_ledgers" : "51813091 - 51815091",
-            "latency" : 16000,
-            "ledger" : "CF72319DC762355C92BDD29E4CE066CEB03FF2A077A511D586B9FD7B74F55D94",
-            "load" : 325,
-            "metrics" : {
-               "avg_bps_recv" : "19012",
-               "avg_bps_sent" : "52053",
-               "total_bytes_recv" : "586809",
-               "total_bytes_sent" : "1678192"
-            },
-            "public_key" : "n9MH4Xu8FYPPoUFs679NQp7F6epFznM7x6bF4sAJWQvKkPBUHgd3",
-            "uptime" : 26,
-            "version" : "rippled-1.4.0-b8"
-         },
-         {
-            "address" : "[::ffff:94.237.45.66]:51235",
-            "complete_ledgers" : "51814966 - 51815093",
-            "latency" : 8773,
-            "ledger" : "61CF015A709122917B001367EE81E5E0D56E485A0BCAB53785A1CB830E0F9589",
-            "load" : 3522,
-            "metrics" : {
-               "avg_bps_recv" : "368875",
-               "avg_bps_sent" : "59308",
-               "total_bytes_recv" : "11558753",
-               "total_bytes_sent" : "2257872"
-            },
-            "public_key" : "n9Lg83FYh8YDivG9TcgXhq5Y3PwunmRqVfvibd19Ko9uu3DtqLBM",
-            "uptime" : 37,
-            "version" : "rippled-1.3.1"
-         }
-      ],
-      "status" : "success"
-   }
+  "result" : {
+    "cluster" : {},
+    "peers" : [
+        {
+          "address" : "50.22.123.222:51235",
+          "complete_ledgers" : "32570 - 51815097",
+          "ledger" : "223DB74FE021AB1A4AA9E1CC588E0DBCC3FC7C080B93C01C30C246D89F951EA2",
+          "load" : 7,
+          "metrics" : {
+              "avg_bps_recv" : "1152",
+              "avg_bps_sent" : "332",
+              "total_bytes_recv" : "96601",
+              "total_bytes_sent" : "45322"
+          },
+          "public_key" : "n9LbkoB9ReSbaA9SGL317fm6CvjLcFG8hGoierLYfwiCDsEXHcP3",
+          "uptime" : 1,
+          "version" : "rippled-1.3.1"
+        },
+        {
+          "address" : "212.83.147.67:51235",
+          "complete_ledgers" : "51815014 - 51815040",
+          "ledger" : "223DB74FE021AB1A4AA9E1CC588E0DBCC3FC7C080B93C01C30C246D89F951EA2",
+          "load" : 1,
+          "metrics" : {
+              "avg_bps_recv" : "0",
+              "avg_bps_sent" : "1490",
+              "total_bytes_recv" : "18348",
+              "total_bytes_sent" : "46013"
+          },
+          "public_key" : "n94s5V53w1g4HdEdHdUU1FVrqHTVDbcb7bt44ib9JcM3c281LoDr",
+          "sanity" : "unknown",
+          "uptime" : 2,
+          "version" : "rippled-1.3.1"
+        },
+        {
+          "address" : "158.69.24.50:51235",
+          "complete_ledgers" : "51478098 - 51815098",
+          "ledger" : "223DB74FE021AB1A4AA9E1CC588E0DBCC3FC7C080B93C01C30C246D89F951EA2",
+          "load" : 55,
+          "metrics" : {
+              "avg_bps_recv" : "88080",
+              "avg_bps_sent" : "2703",
+              "total_bytes_recv" : "2786780",
+              "total_bytes_sent" : "89368"
+          },
+          "public_key" : "n9KfEhmmdxmjJdpbpRHGJ9ezoNzdyUepA11cT71jmq1fMDsZAcSh",
+          "uptime" : 3,
+          "version" : "rippled-1.3.1"
+        },
+        {
+          "address" : "[::ffff:174.64.99.193]:51235",
+          "complete_ledgers" : "51813091 - 51815091",
+          "latency" : 16000,
+          "ledger" : "CF72319DC762355C92BDD29E4CE066CEB03FF2A077A511D586B9FD7B74F55D94",
+          "load" : 325,
+          "metrics" : {
+              "avg_bps_recv" : "19012",
+              "avg_bps_sent" : "52053",
+              "total_bytes_recv" : "586809",
+              "total_bytes_sent" : "1678192"
+          },
+          "public_key" : "n9MH4Xu8FYPPoUFs679NQp7F6epFznM7x6bF4sAJWQvKkPBUHgd3",
+          "uptime" : 26,
+          "version" : "rippled-1.4.0-b8"
+        },
+        {
+          "address" : "[::ffff:94.237.45.66]:51235",
+          "complete_ledgers" : "51814966 - 51815093",
+          "latency" : 8773,
+          "ledger" : "61CF015A709122917B001367EE81E5E0D56E485A0BCAB53785A1CB830E0F9589",
+          "load" : 3522,
+          "metrics" : {
+              "avg_bps_recv" : "368875",
+              "avg_bps_sent" : "59308",
+              "total_bytes_recv" : "11558753",
+              "total_bytes_sent" : "2257872"
+          },
+          "public_key" : "n9Lg83FYh8YDivG9TcgXhq5Y3PwunmRqVfvibd19Ko9uu3DtqLBM",
+          "uptime" : 37,
+          "version" : "rippled-1.3.1"
+        }
+    ],
+    "status" : "success"
+  }
 }
 ```
 {% /tab %}

docs/references/http-websocket-apis/admin-api-methods/server-control-methods/ledger_accept.md

@@ -1,13 +1,11 @@
 ---
-html: ledger_accept.html
-parent: server-control-methods.html
 seo:
     description: Close and advance the ledger in stand-alone mode.
 labels:
-  - Core Server
+    - Core Server
 ---
 # ledger_accept
-[[Source]](https://github.com/XRPLF/rippled/blob/a61ffab3f9010d8accfaa98aa3cacc7d38e74121/src/ripple/rpc/handlers/LedgerAccept.cpp "Source")
+[[Source]](https://github.com/XRPLF/rippled/blob/master/src/xrpld/rpc/handlers/LedgerAccept.cpp "Source")
 
 The `ledger_accept` method forces the server to close the current-working ledger and move to the next ledger number. This method is intended for testing purposes only, and is only available when the `rippled` server is running stand-alone mode.
 
@@ -22,8 +20,8 @@ An example of the request format:
 {% tab label="WebSocket" %}
 ```json
 {
-   "id": "Accept my ledger!",
-   "command": "ledger_accept"
+  "id": "Accept my ledger!",
+  "command": "ledger_accept"
 }
 ```
 {% /tab %}

docs/references/http-websocket-apis/admin-api-methods/server-control-methods/stop.md

@@ -1,13 +1,11 @@
 ---
-html: stop.html
-parent: server-control-methods.html
 seo:
     description: Shut down the rippled server.
 labels:
-  - Core Server
+    - Core Server
 ---
 # stop
-[[Source]](https://github.com/XRPLF/rippled/blob/master/src/ripple/rpc/handlers/Stop.cpp "Source")
+[[Source]](https://github.com/XRPLF/rippled/blob/master/src/xrpld/rpc/handlers/Stop.cpp "Source")
 
 Gracefully shuts down the server.
 

docs/references/http-websocket-apis/admin-api-methods/signing-methods/sign.md

@@ -1,13 +1,11 @@
 ---
-html: sign.html # watch for clashes w/ this filename
-parent: signing-methods.html
 seo:
     description: Cryptographically sign a transaction.
 labels:
-  - Transaction Sending
+    - Transaction Sending
 ---
 # sign
-[[Source]](https://github.com/XRPLF/rippled/blob/master/src/ripple/rpc/handlers/SignHandler.cpp "Source")
+[[Source]](https://github.com/XRPLF/rippled/blob/master/src/xrpld/rpc/handlers/SignHandler.cpp "Source")
 
 The `sign` method takes a [transaction in JSON format](../../../protocol/transactions/index.md) and a [seed value](../../../../concepts/accounts/cryptographic-keys.md), and returns a signed binary representation of the transaction. To contribute one signature to a [multi-signed transaction](../../../../concepts/accounts/multi-signing.md), use the [sign_for method][] instead.
 

docs/references/http-websocket-apis/admin-api-methods/signing-methods/sign_for.md

@@ -1,21 +1,16 @@
 ---
-html: sign_for.html
-parent: signing-methods.html
 seo:
     description: Contribute to a multi-signature.
 labels:
-  - Transaction Sending
+    - Transaction Sending
 ---
 # sign_for
-[[Source]](https://github.com/XRPLF/rippled/blob/release/src/ripple/rpc/handlers/SignFor.cpp "Source")
+[[Source]](https://github.com/XRPLF/rippled/blob/master/src/xrpld/rpc/handlers/SignFor.cpp "Source")
 
 The `sign_for` command provides one signature for a [multi-signed transaction](../../../../concepts/accounts/multi-signing.md).
 
 {% partial file="/docs/_snippets/public-signing-note.md" /%}
 
-
-This command requires the [MultiSign amendment][] to be enabled.
-
 ## Request Format
 An example of the request format:
 
@@ -157,33 +152,33 @@ An example of a successful response:
 200 OK
 
 {
-   "result" : {
-      "status" : "success",
-      "tx_blob" : "1200142200040000240000000263D5038D7EA4C680000000000000000000000000005553440000000000B5F762798A53D543A014CAF8B297CFF8F2F937E868400000000000753073008114A3780F5CB5A44D366520FC44055E8ED44D9A2270F3E010732102B3EC4E5DD96029A647CFA20DA07FE1F85296505552CCAC114087E66B46BD77DF744730450221009C195DBBF7967E223D8626CA19CF02073667F2B22E206727BFE848FF42BEAC8A022048C323B0BED19A988BDBEFA974B6DE8AA9DCAE250AA82BBD1221787032A864E58114204288D2E47F8EF6C99BCC457966320D12409711E1F1",
-      "tx_json" : {
-         "Account" : "rEuLyBCvcw4CFmzv8RepSiAoNgF8tTGJQC",
-         "Fee" : "30000",
-         "Flags" : 262144,
-         "LimitAmount" : {
-            "currency" : "USD",
-            "issuer" : "rHb9CJAWyB4rj91VRWn96DkukG4bwdtyTh",
-            "value" : "100"
-         },
-         "Sequence" : 2,
-         "Signers" : [
-            {
-               "Signer" : {
-                  "Account" : "rsA2LpzuawewSBQXkiju3YQTMzW13pAAdW",
-                  "SigningPubKey" : "02B3EC4E5DD96029A647CFA20DA07FE1F85296505552CCAC114087E66B46BD77DF",
-                  "TxnSignature" : "30450221009C195DBBF7967E223D8626CA19CF02073667F2B22E206727BFE848FF42BEAC8A022048C323B0BED19A988BDBEFA974B6DE8AA9DCAE250AA82BBD1221787032A864E5"
-               }
-            }
-         ],
-         "SigningPubKey" : "",
-         "TransactionType" : "TrustSet",
-         "hash" : "A94A6417D1A7AAB059822B894E13D322ED3712F7212CE9257801F96DE6C3F6AE"
-      }
-   }
+  "result" : {
+    "status" : "success",
+    "tx_blob" : "1200142200040000240000000263D5038D7EA4C680000000000000000000000000005553440000000000B5F762798A53D543A014CAF8B297CFF8F2F937E868400000000000753073008114A3780F5CB5A44D366520FC44055E8ED44D9A2270F3E010732102B3EC4E5DD96029A647CFA20DA07FE1F85296505552CCAC114087E66B46BD77DF744730450221009C195DBBF7967E223D8626CA19CF02073667F2B22E206727BFE848FF42BEAC8A022048C323B0BED19A988BDBEFA974B6DE8AA9DCAE250AA82BBD1221787032A864E58114204288D2E47F8EF6C99BCC457966320D12409711E1F1",
+    "tx_json" : {
+        "Account" : "rEuLyBCvcw4CFmzv8RepSiAoNgF8tTGJQC",
+        "Fee" : "30000",
+        "Flags" : 262144,
+        "LimitAmount" : {
+          "currency" : "USD",
+          "issuer" : "rHb9CJAWyB4rj91VRWn96DkukG4bwdtyTh",
+          "value" : "100"
+        },
+        "Sequence" : 2,
+        "Signers" : [
+          {
+              "Signer" : {
+                "Account" : "rsA2LpzuawewSBQXkiju3YQTMzW13pAAdW",
+                "SigningPubKey" : "02B3EC4E5DD96029A647CFA20DA07FE1F85296505552CCAC114087E66B46BD77DF",
+                "TxnSignature" : "30450221009C195DBBF7967E223D8626CA19CF02073667F2B22E206727BFE848FF42BEAC8A022048C323B0BED19A988BDBEFA974B6DE8AA9DCAE250AA82BBD1221787032A864E5"
+              }
+          }
+        ],
+        "SigningPubKey" : "",
+        "TransactionType" : "TrustSet",
+        "hash" : "A94A6417D1A7AAB059822B894E13D322ED3712F7212CE9257801F96DE6C3F6AE"
+    }
+  }
 }
 ```
 {% /tab %}
@@ -194,33 +189,33 @@ Loading: "/etc/rippled.cfg"
 Connecting to 127.0.0.1:5005
 
 {
-   "result" : {
-      "status" : "success",
-      "tx_blob" : "1200142200040000240000000263D5038D7EA4C680000000000000000000000000005553440000000000B5F762798A53D543A014CAF8B297CFF8F2F937E868400000000000753073008114A3780F5CB5A44D366520FC44055E8ED44D9A2270F3E010732102B3EC4E5DD96029A647CFA20DA07FE1F85296505552CCAC114087E66B46BD77DF744730450221009C195DBBF7967E223D8626CA19CF02073667F2B22E206727BFE848FF42BEAC8A022048C323B0BED19A988BDBEFA974B6DE8AA9DCAE250AA82BBD1221787032A864E58114204288D2E47F8EF6C99BCC457966320D12409711E1F1",
-      "tx_json" : {
-         "Account" : "rEuLyBCvcw4CFmzv8RepSiAoNgF8tTGJQC",
-         "Fee" : "30000",
-         "Flags" : 262144,
-         "LimitAmount" : {
-            "currency" : "USD",
-            "issuer" : "rHb9CJAWyB4rj91VRWn96DkukG4bwdtyTh",
-            "value" : "100"
-         },
-         "Sequence" : 2,
-         "Signers" : [
-            {
-               "Signer" : {
-                  "Account" : "rsA2LpzuawewSBQXkiju3YQTMzW13pAAdW",
-                  "SigningPubKey" : "02B3EC4E5DD96029A647CFA20DA07FE1F85296505552CCAC114087E66B46BD77DF",
-                  "TxnSignature" : "30450221009C195DBBF7967E223D8626CA19CF02073667F2B22E206727BFE848FF42BEAC8A022048C323B0BED19A988BDBEFA974B6DE8AA9DCAE250AA82BBD1221787032A864E5"
-               }
-            }
-         ],
-         "SigningPubKey" : "",
-         "TransactionType" : "TrustSet",
-         "hash" : "A94A6417D1A7AAB059822B894E13D322ED3712F7212CE9257801F96DE6C3F6AE"
-      }
-   }
+  "result" : {
+    "status" : "success",
+    "tx_blob" : "1200142200040000240000000263D5038D7EA4C680000000000000000000000000005553440000000000B5F762798A53D543A014CAF8B297CFF8F2F937E868400000000000753073008114A3780F5CB5A44D366520FC44055E8ED44D9A2270F3E010732102B3EC4E5DD96029A647CFA20DA07FE1F85296505552CCAC114087E66B46BD77DF744730450221009C195DBBF7967E223D8626CA19CF02073667F2B22E206727BFE848FF42BEAC8A022048C323B0BED19A988BDBEFA974B6DE8AA9DCAE250AA82BBD1221787032A864E58114204288D2E47F8EF6C99BCC457966320D12409711E1F1",
+    "tx_json" : {
+        "Account" : "rEuLyBCvcw4CFmzv8RepSiAoNgF8tTGJQC",
+        "Fee" : "30000",
+        "Flags" : 262144,
+        "LimitAmount" : {
+          "currency" : "USD",
+          "issuer" : "rHb9CJAWyB4rj91VRWn96DkukG4bwdtyTh",
+          "value" : "100"
+        },
+        "Sequence" : 2,
+        "Signers" : [
+          {
+              "Signer" : {
+                "Account" : "rsA2LpzuawewSBQXkiju3YQTMzW13pAAdW",
+                "SigningPubKey" : "02B3EC4E5DD96029A647CFA20DA07FE1F85296505552CCAC114087E66B46BD77DF",
+                "TxnSignature" : "30450221009C195DBBF7967E223D8626CA19CF02073667F2B22E206727BFE848FF42BEAC8A022048C323B0BED19A988BDBEFA974B6DE8AA9DCAE250AA82BBD1221787032A864E5"
+              }
+          }
+        ],
+        "SigningPubKey" : "",
+        "TransactionType" : "TrustSet",
+        "hash" : "A94A6417D1A7AAB059822B894E13D322ED3712F7212CE9257801F96DE6C3F6AE"
+    }
+  }
 }
 ```
 {% /tab %}

docs/references/http-websocket-apis/admin-api-methods/status-and-debugging-methods/consensus_info.md

@@ -1,14 +1,12 @@
 ---
-html: consensus_info.html
-parent: status-and-debugging-methods.html
 seo:
-    description: Get information about the state of consensus as it happens.
+     description: Get information about the state of consensus as it happens.
 labels:
-  - Blockchain
-  - Core Server
+    - Blockchain
+    - Core Server
 ---
 # consensus_info
-[[Source]](https://github.com/XRPLF/rippled/blob/a61ffab3f9010d8accfaa98aa3cacc7d38e74121/src/ripple/rpc/handlers/ConsensusInfo.cpp "Source")
+[[Source]](https://github.com/XRPLF/rippled/blob/master/src/xrpld/rpc/handlers/ConsensusInfo.cpp "Source")
 
 The `consensus_info` command provides information about the [consensus process](../../../../concepts/consensus-protocol/index.md) for debugging purposes.
 
@@ -59,74 +57,74 @@ An example of a successful response:
 {% tab label="JSON-RPC" %}
 ```json
 {
-   "result" : {
-      "info" : {
-         "acquired" : {
-            "4BC2CE596CBD1321775320E2067F9C06D3862826212C16EF42ABB6A2B0414306" : "acquired"
-         },
-         "close_granularity" : 10,
-         "close_percent" : 50,
-         "close_resolution" : 10,
-         "close_times" : {
-            "486082972" : 1,
-            "486082973" : 4
-         },
-         "current_ms" : 1003,
-         "have_time_consensus" : false,
-         "ledger_seq" : 13701086,
-         "our_position" : {
-            "close_time" : 486082973,
-            "previous_ledger" : "0BB01379B51234BAAF501A71C7AB147F595460B689BB9E8252A0B87B5A483623",
-            "propose_seq" : 0,
-            "transaction_hash" : "4BC2CE596CBD1321775320E2067F9C06D3862826212C16EF42ABB6A2B0414306"
-         },
-         "peer_positions" : {
-            "0A2EAF919033A036D363D4E5610A66209DDBE8EE" : {
-               "close_time" : 486082972,
-               "peer_id" : "n9KiYM9CgngLvtRCQHZwgC2gjpdaZcCcbt3VboxiNFcKuwFVujzS",
-               "previous_ledger" : "0BB01379B51234BAAF501A71C7AB147F595460B689BB9E8252A0B87B5A483623",
-               "propose_seq" : 0,
-               "transaction_hash" : "4BC2CE596CBD1321775320E2067F9C06D3862826212C16EF42ABB6A2B0414306"
-            },
-            "1567A8C953A86F8428C7B01641D79BBF2FD508F3" : {
-               "close_time" : 486082973,
-               "peer_id" : "n9LdgEtkmGB9E2h3K4Vp7iGUaKuq23Zr32ehxiU8FWY7xoxbWTSA",
-               "previous_ledger" : "0BB01379B51234BAAF501A71C7AB147F595460B689BB9E8252A0B87B5A483623",
-               "propose_seq" : 0,
-               "transaction_hash" : "4BC2CE596CBD1321775320E2067F9C06D3862826212C16EF42ABB6A2B0414306"
-            },
-            "202397A81F20B44CF44EA99AF761295E5A8397D2" : {
-               "close_time" : 486082973,
-               "peer_id" : "n9MD5h24qrQqiyBC8aeqqCWvpiBiYQ3jxSr91uiDvmrkyHRdYLUj",
-               "previous_ledger" : "0BB01379B51234BAAF501A71C7AB147F595460B689BB9E8252A0B87B5A483623",
-               "propose_seq" : 0,
-               "transaction_hash" : "4BC2CE596CBD1321775320E2067F9C06D3862826212C16EF42ABB6A2B0414306"
-            },
-            "5C29005CF4FB479FC49EEFB4A5B075C86DD963CC" : {
-               "close_time" : 486082973,
-               "peer_id" : "n9L81uNCaPgtUJfaHh89gmdvXKAmSt5Gdsw2g1iPWaPkAHW5Nm4C",
-               "previous_ledger" : "0BB01379B51234BAAF501A71C7AB147F595460B689BB9E8252A0B87B5A483623",
-               "propose_seq" : 0,
-               "transaction_hash" : "4BC2CE596CBD1321775320E2067F9C06D3862826212C16EF42ABB6A2B0414306"
-            },
-            "EFC49EB648E557CC50A72D715249B80E071F7705" : {
-               "close_time" : 486082973,
-               "peer_id" : "n949f75evCHwgyP4fPVgaHqNHxUVN15PsJEZ3B3HnXPcPjcZAoy7",
-               "previous_ledger" : "0BB01379B51234BAAF501A71C7AB147F595460B689BB9E8252A0B87B5A483623",
-               "propose_seq" : 0,
-               "transaction_hash" : "4BC2CE596CBD1321775320E2067F9C06D3862826212C16EF42ABB6A2B0414306"
-            }
-         },
-         "previous_mseconds" : 2005,
-         "previous_proposers" : 5,
-         "proposers" : 5,
-         "proposing" : false,
-         "state" : "consensus",
-         "synched" : true,
-         "validating" : false
-      },
-      "status" : "success"
-   }
+  "result" : {
+    "info" : {
+        "acquired" : {
+          "4BC2CE596CBD1321775320E2067F9C06D3862826212C16EF42ABB6A2B0414306" : "acquired"
+        },
+        "close_granularity" : 10,
+        "close_percent" : 50,
+        "close_resolution" : 10,
+        "close_times" : {
+          "486082972" : 1,
+          "486082973" : 4
+        },
+        "current_ms" : 1003,
+        "have_time_consensus" : false,
+        "ledger_seq" : 13701086,
+        "our_position" : {
+          "close_time" : 486082973,
+          "previous_ledger" : "0BB01379B51234BAAF501A71C7AB147F595460B689BB9E8252A0B87B5A483623",
+          "propose_seq" : 0,
+          "transaction_hash" : "4BC2CE596CBD1321775320E2067F9C06D3862826212C16EF42ABB6A2B0414306"
+        },
+        "peer_positions" : {
+          "0A2EAF919033A036D363D4E5610A66209DDBE8EE" : {
+              "close_time" : 486082972,
+              "peer_id" : "n9KiYM9CgngLvtRCQHZwgC2gjpdaZcCcbt3VboxiNFcKuwFVujzS",
+              "previous_ledger" : "0BB01379B51234BAAF501A71C7AB147F595460B689BB9E8252A0B87B5A483623",
+              "propose_seq" : 0,
+              "transaction_hash" : "4BC2CE596CBD1321775320E2067F9C06D3862826212C16EF42ABB6A2B0414306"
+          },
+          "1567A8C953A86F8428C7B01641D79BBF2FD508F3" : {
+              "close_time" : 486082973,
+              "peer_id" : "n9LdgEtkmGB9E2h3K4Vp7iGUaKuq23Zr32ehxiU8FWY7xoxbWTSA",
+              "previous_ledger" : "0BB01379B51234BAAF501A71C7AB147F595460B689BB9E8252A0B87B5A483623",
+              "propose_seq" : 0,
+              "transaction_hash" : "4BC2CE596CBD1321775320E2067F9C06D3862826212C16EF42ABB6A2B0414306"
+          },
+          "202397A81F20B44CF44EA99AF761295E5A8397D2" : {
+              "close_time" : 486082973,
+              "peer_id" : "n9MD5h24qrQqiyBC8aeqqCWvpiBiYQ3jxSr91uiDvmrkyHRdYLUj",
+              "previous_ledger" : "0BB01379B51234BAAF501A71C7AB147F595460B689BB9E8252A0B87B5A483623",
+              "propose_seq" : 0,
+              "transaction_hash" : "4BC2CE596CBD1321775320E2067F9C06D3862826212C16EF42ABB6A2B0414306"
+          },
+          "5C29005CF4FB479FC49EEFB4A5B075C86DD963CC" : {
+              "close_time" : 486082973,
+              "peer_id" : "n9L81uNCaPgtUJfaHh89gmdvXKAmSt5Gdsw2g1iPWaPkAHW5Nm4C",
+              "previous_ledger" : "0BB01379B51234BAAF501A71C7AB147F595460B689BB9E8252A0B87B5A483623",
+              "propose_seq" : 0,
+              "transaction_hash" : "4BC2CE596CBD1321775320E2067F9C06D3862826212C16EF42ABB6A2B0414306"
+          },
+          "EFC49EB648E557CC50A72D715249B80E071F7705" : {
+              "close_time" : 486082973,
+              "peer_id" : "n949f75evCHwgyP4fPVgaHqNHxUVN15PsJEZ3B3HnXPcPjcZAoy7",
+              "previous_ledger" : "0BB01379B51234BAAF501A71C7AB147F595460B689BB9E8252A0B87B5A483623",
+              "propose_seq" : 0,
+              "transaction_hash" : "4BC2CE596CBD1321775320E2067F9C06D3862826212C16EF42ABB6A2B0414306"
+          }
+        },
+        "previous_mseconds" : 2005,
+        "previous_proposers" : 5,
+        "proposers" : 5,
+        "proposing" : false,
+        "state" : "consensus",
+        "synched" : true,
+        "validating" : false
+    },
+    "status" : "success"
+  }
 }
 ```
 {% /tab %}
@@ -137,74 +135,74 @@ Loading: "/etc/rippled.cfg"
 Connecting to 127.0.0.1:5005
 
 {
-   "result" : {
-      "info" : {
-         "acquired" : {
-            "4BC2CE596CBD1321775320E2067F9C06D3862826212C16EF42ABB6A2B0414306" : "acquired"
-         },
-         "close_granularity" : 10,
-         "close_percent" : 50,
-         "close_resolution" : 10,
-         "close_times" : {
-            "486082972" : 1,
-            "486082973" : 4
-         },
-         "current_ms" : 1003,
-         "have_time_consensus" : false,
-         "ledger_seq" : 13701086,
-         "our_position" : {
-            "close_time" : 486082973,
-            "previous_ledger" : "0BB01379B51234BAAF501A71C7AB147F595460B689BB9E8252A0B87B5A483623",
-            "propose_seq" : 0,
-            "transaction_hash" : "4BC2CE596CBD1321775320E2067F9C06D3862826212C16EF42ABB6A2B0414306"
-         },
-         "peer_positions" : {
-            "0A2EAF919033A036D363D4E5610A66209DDBE8EE" : {
-               "close_time" : 486082972,
-               "peer_id" : "n9KiYM9CgngLvtRCQHZwgC2gjpdaZcCcbt3VboxiNFcKuwFVujzS",
-               "previous_ledger" : "0BB01379B51234BAAF501A71C7AB147F595460B689BB9E8252A0B87B5A483623",
-               "propose_seq" : 0,
-               "transaction_hash" : "4BC2CE596CBD1321775320E2067F9C06D3862826212C16EF42ABB6A2B0414306"
-            },
-            "1567A8C953A86F8428C7B01641D79BBF2FD508F3" : {
-               "close_time" : 486082973,
-               "peer_id" : "n9LdgEtkmGB9E2h3K4Vp7iGUaKuq23Zr32ehxiU8FWY7xoxbWTSA",
-               "previous_ledger" : "0BB01379B51234BAAF501A71C7AB147F595460B689BB9E8252A0B87B5A483623",
-               "propose_seq" : 0,
-               "transaction_hash" : "4BC2CE596CBD1321775320E2067F9C06D3862826212C16EF42ABB6A2B0414306"
-            },
-            "202397A81F20B44CF44EA99AF761295E5A8397D2" : {
-               "close_time" : 486082973,
-               "peer_id" : "n9MD5h24qrQqiyBC8aeqqCWvpiBiYQ3jxSr91uiDvmrkyHRdYLUj",
-               "previous_ledger" : "0BB01379B51234BAAF501A71C7AB147F595460B689BB9E8252A0B87B5A483623",
-               "propose_seq" : 0,
-               "transaction_hash" : "4BC2CE596CBD1321775320E2067F9C06D3862826212C16EF42ABB6A2B0414306"
-            },
-            "5C29005CF4FB479FC49EEFB4A5B075C86DD963CC" : {
-               "close_time" : 486082973,
-               "peer_id" : "n9L81uNCaPgtUJfaHh89gmdvXKAmSt5Gdsw2g1iPWaPkAHW5Nm4C",
-               "previous_ledger" : "0BB01379B51234BAAF501A71C7AB147F595460B689BB9E8252A0B87B5A483623",
-               "propose_seq" : 0,
-               "transaction_hash" : "4BC2CE596CBD1321775320E2067F9C06D3862826212C16EF42ABB6A2B0414306"
-            },
-            "EFC49EB648E557CC50A72D715249B80E071F7705" : {
-               "close_time" : 486082973,
-               "peer_id" : "n949f75evCHwgyP4fPVgaHqNHxUVN15PsJEZ3B3HnXPcPjcZAoy7",
-               "previous_ledger" : "0BB01379B51234BAAF501A71C7AB147F595460B689BB9E8252A0B87B5A483623",
-               "propose_seq" : 0,
-               "transaction_hash" : "4BC2CE596CBD1321775320E2067F9C06D3862826212C16EF42ABB6A2B0414306"
-            }
-         },
-         "previous_mseconds" : 2005,
-         "previous_proposers" : 5,
-         "proposers" : 5,
-         "proposing" : false,
-         "state" : "consensus",
-         "synched" : true,
-         "validating" : false
-      },
-      "status" : "success"
-   }
+  "result" : {
+    "info" : {
+        "acquired" : {
+          "4BC2CE596CBD1321775320E2067F9C06D3862826212C16EF42ABB6A2B0414306" : "acquired"
+        },
+        "close_granularity" : 10,
+        "close_percent" : 50,
+        "close_resolution" : 10,
+        "close_times" : {
+          "486082972" : 1,
+          "486082973" : 4
+        },
+        "current_ms" : 1003,
+        "have_time_consensus" : false,
+        "ledger_seq" : 13701086,
+        "our_position" : {
+          "close_time" : 486082973,
+          "previous_ledger" : "0BB01379B51234BAAF501A71C7AB147F595460B689BB9E8252A0B87B5A483623",
+          "propose_seq" : 0,
+          "transaction_hash" : "4BC2CE596CBD1321775320E2067F9C06D3862826212C16EF42ABB6A2B0414306"
+        },
+        "peer_positions" : {
+          "0A2EAF919033A036D363D4E5610A66209DDBE8EE" : {
+              "close_time" : 486082972,
+              "peer_id" : "n9KiYM9CgngLvtRCQHZwgC2gjpdaZcCcbt3VboxiNFcKuwFVujzS",
+              "previous_ledger" : "0BB01379B51234BAAF501A71C7AB147F595460B689BB9E8252A0B87B5A483623",
+              "propose_seq" : 0,
+              "transaction_hash" : "4BC2CE596CBD1321775320E2067F9C06D3862826212C16EF42ABB6A2B0414306"
+          },
+          "1567A8C953A86F8428C7B01641D79BBF2FD508F3" : {
+              "close_time" : 486082973,
+              "peer_id" : "n9LdgEtkmGB9E2h3K4Vp7iGUaKuq23Zr32ehxiU8FWY7xoxbWTSA",
+              "previous_ledger" : "0BB01379B51234BAAF501A71C7AB147F595460B689BB9E8252A0B87B5A483623",
+              "propose_seq" : 0,
+              "transaction_hash" : "4BC2CE596CBD1321775320E2067F9C06D3862826212C16EF42ABB6A2B0414306"
+          },
+          "202397A81F20B44CF44EA99AF761295E5A8397D2" : {
+              "close_time" : 486082973,
+              "peer_id" : "n9MD5h24qrQqiyBC8aeqqCWvpiBiYQ3jxSr91uiDvmrkyHRdYLUj",
+              "previous_ledger" : "0BB01379B51234BAAF501A71C7AB147F595460B689BB9E8252A0B87B5A483623",
+              "propose_seq" : 0,
+              "transaction_hash" : "4BC2CE596CBD1321775320E2067F9C06D3862826212C16EF42ABB6A2B0414306"
+          },
+          "5C29005CF4FB479FC49EEFB4A5B075C86DD963CC" : {
+              "close_time" : 486082973,
+              "peer_id" : "n9L81uNCaPgtUJfaHh89gmdvXKAmSt5Gdsw2g1iPWaPkAHW5Nm4C",
+              "previous_ledger" : "0BB01379B51234BAAF501A71C7AB147F595460B689BB9E8252A0B87B5A483623",
+              "propose_seq" : 0,
+              "transaction_hash" : "4BC2CE596CBD1321775320E2067F9C06D3862826212C16EF42ABB6A2B0414306"
+          },
+          "EFC49EB648E557CC50A72D715249B80E071F7705" : {
+              "close_time" : 486082973,
+              "peer_id" : "n949f75evCHwgyP4fPVgaHqNHxUVN15PsJEZ3B3HnXPcPjcZAoy7",
+              "previous_ledger" : "0BB01379B51234BAAF501A71C7AB147F595460B689BB9E8252A0B87B5A483623",
+              "propose_seq" : 0,
+              "transaction_hash" : "4BC2CE596CBD1321775320E2067F9C06D3862826212C16EF42ABB6A2B0414306"
+          }
+        },
+        "previous_mseconds" : 2005,
+        "previous_proposers" : 5,
+        "proposers" : 5,
+        "proposing" : false,
+        "state" : "consensus",
+        "synched" : true,
+        "validating" : false
+    },
+    "status" : "success"
+  }
 }
 ```
 {% /tab %}

docs/references/http-websocket-apis/admin-api-methods/status-and-debugging-methods/feature.md

@@ -1,18 +1,16 @@
 ---
-html: feature.html
-parent: status-and-debugging-methods.html
 seo:
     description: Get information about protocol amendments.
 labels:
-  - Blockchain
-  - Core Server
+    - Blockchain
+    - Core Server
 ---
 # feature
-[[Source]](https://github.com/XRPLF/rippled/blob/master/src/ripple/rpc/handlers/Feature1.cpp "Source")
+[[Source]](https://github.com/XRPLF/rippled/blob/master/src/xrpld/rpc/handlers/Feature1.cpp "Source")
 
 The `feature` command returns information about [amendments](../../../../concepts/networks-and-servers/amendments.md) this server knows about, including whether they are enabled and whether the server is voting in favor of those amendments in the [amendment process](../../../../concepts/networks-and-servers/amendments.md#amendment-process).
 
-You can use the `feature` command to configure the server to vote against or in favor of an amendment. This change persists even if you restart the server. {% badge href="https://github.com/XRPLF/rippled/releases/tag/1.7.0" %}Updated in: rippled 1.7.0{% /badge %}
+You can use the `feature` command to configure the server to vote against or in favor of an amendment. This change persists even if you restart the server.
 
 _The `feature` method documented on this page is an [admin method](../index.md). For the non-admin version, see the [`feature` public API method](../../public-api-methods/server-info-methods/feature.md)._
 

docs/references/http-websocket-apis/admin-api-methods/status-and-debugging-methods/fetch_info.md

@@ -1,13 +1,11 @@
 ---
-html: fetch_info.html
-parent: status-and-debugging-methods.html
 seo:
     description: Get information about the server's sync with the network.
 labels:
-  - Core Server
+    - Core Server
 ---
 # fetch_info
-[[Source]](https://github.com/XRPLF/rippled/blob/315a8b6b602798a4cff4d8e1911936011e12abdb/src/ripple/rpc/handlers/FetchInfo.cpp "Source")
+[[Source]](https://github.com/XRPLF/rippled/blob/master/src/xrpld/rpc/handlers/FetchInfo.cpp "Source")
 
 The `fetch_info` command returns information about objects that this server is currently fetching from the network, and how many peers have that information. It can also be used to reset current fetches.
 
@@ -65,37 +63,37 @@ An example of a successful response:
 {% tab label="JSON-RPC" %}
 ```json
 {
-   "result" : {
-      "info" : {
-         "348928" : {
-            "hash" : "C26D432B06F84861BCACD7942EDC3FE0B2E1DEB966A9E516A0FD275A375C2010",
-            "have_header" : true,
-            "have_state" : false,
-            "have_transactions" : true,
-            "needed_state_hashes" : [
-               "BF8DC6B1E10D1D3565BF0649075D22EBFD34F751AFCC0E53E81D74786BC88922",
-               "34E37A71CB51A12C73A435250E6A6349F7884C7EEBA6B88FA31F0244E967E88F",
-               "BFB7D3008A7D61FD6A0538D1C2E70CFB94CE8DC66606319C372F278A48629765",
-               "41C0C61D701FB1EA586F0EF1FC7A91FEC476D979589DA60507F05C13F7C21975",
-               "6DDE8840A2C3C7FF05E5FFEE4D06408694C16A8357338FE0C4581DC3D8A00BBA",
-               "6C69D833B582C849917806FA009518832BB50E900E43716FD7CC1966428DD0CF",
-               "1EDC020CFC4AF19B625C52E20B66D6AE672821CCC461E8A9C457A3B2955657F7",
-               "FC0616A66A2B0589CA513F3341D4EA51E782C4601E5072308478E3CC19264640",
-               "19FC607B5DE1B64681A676EC1ED5507B9555B0E098CD9D898320297DE1A64033",
-               "5E128D3FC990074E35687387A14AA12D9FD287E5AB57CB9B2FD83DE635DF5CA9",
-               "DE72820F3981770F2AA8770BC233B80661F1A452819D8529008875FF8DED87A9",
-               "3ACB84BEE2C45556351FF60FD787D235C9CF5623FB8A35B01446B773598E7CC0",
-               "0DD3A8DF69874148057F1F2BF305442FF2E89A76A08B4CC8C051E2ED69B874F3",
-               "4AE9A9C4F12A5BD0355037DA40A0B145420A2168A9FEDE43E643BD13062F8ECE",
-               "08CBF8CFFEC207F5AC4E4F24BC447011FD8C79D25B344281FBFB4732D7058ED4",
-               "779B2577C5C4BAED6657421448EA506BBF50F86BE363E0924127C4EA17A58BBE"
-            ],
-            "peers" : 2,
-            "timeouts" : 0
-         }
-      },
-      "status" : "success"
-   }
+  "result" : {
+    "info" : {
+        "348928" : {
+          "hash" : "C26D432B06F84861BCACD7942EDC3FE0B2E1DEB966A9E516A0FD275A375C2010",
+          "have_header" : true,
+          "have_state" : false,
+          "have_transactions" : true,
+          "needed_state_hashes" : [
+              "BF8DC6B1E10D1D3565BF0649075D22EBFD34F751AFCC0E53E81D74786BC88922",
+              "34E37A71CB51A12C73A435250E6A6349F7884C7EEBA6B88FA31F0244E967E88F",
+              "BFB7D3008A7D61FD6A0538D1C2E70CFB94CE8DC66606319C372F278A48629765",
+              "41C0C61D701FB1EA586F0EF1FC7A91FEC476D979589DA60507F05C13F7C21975",
+              "6DDE8840A2C3C7FF05E5FFEE4D06408694C16A8357338FE0C4581DC3D8A00BBA",
+              "6C69D833B582C849917806FA009518832BB50E900E43716FD7CC1966428DD0CF",
+              "1EDC020CFC4AF19B625C52E20B66D6AE672821CCC461E8A9C457A3B2955657F7",
+              "FC0616A66A2B0589CA513F3341D4EA51E782C4601E5072308478E3CC19264640",
+              "19FC607B5DE1B64681A676EC1ED5507B9555B0E098CD9D898320297DE1A64033",
+              "5E128D3FC990074E35687387A14AA12D9FD287E5AB57CB9B2FD83DE635DF5CA9",
+              "DE72820F3981770F2AA8770BC233B80661F1A452819D8529008875FF8DED87A9",
+              "3ACB84BEE2C45556351FF60FD787D235C9CF5623FB8A35B01446B773598E7CC0",
+              "0DD3A8DF69874148057F1F2BF305442FF2E89A76A08B4CC8C051E2ED69B874F3",
+              "4AE9A9C4F12A5BD0355037DA40A0B145420A2168A9FEDE43E643BD13062F8ECE",
+              "08CBF8CFFEC207F5AC4E4F24BC447011FD8C79D25B344281FBFB4732D7058ED4",
+              "779B2577C5C4BAED6657421448EA506BBF50F86BE363E0924127C4EA17A58BBE"
+          ],
+          "peers" : 2,
+          "timeouts" : 0
+        }
+    },
+    "status" : "success"
+  }
 }
 ```
 {% /tab %}
@@ -106,37 +104,37 @@ Loading: "/etc/rippled.cfg"
 Connecting to 127.0.0.1:5005
 
 {
-   "result" : {
-      "info" : {
-         "348928" : {
-            "hash" : "C26D432B06F84861BCACD7942EDC3FE0B2E1DEB966A9E516A0FD275A375C2010",
-            "have_header" : true,
-            "have_state" : false,
-            "have_transactions" : true,
-            "needed_state_hashes" : [
-               "BF8DC6B1E10D1D3565BF0649075D22EBFD34F751AFCC0E53E81D74786BC88922",
-               "34E37A71CB51A12C73A435250E6A6349F7884C7EEBA6B88FA31F0244E967E88F",
-               "BFB7D3008A7D61FD6A0538D1C2E70CFB94CE8DC66606319C372F278A48629765",
-               "41C0C61D701FB1EA586F0EF1FC7A91FEC476D979589DA60507F05C13F7C21975",
-               "6DDE8840A2C3C7FF05E5FFEE4D06408694C16A8357338FE0C4581DC3D8A00BBA",
-               "6C69D833B582C849917806FA009518832BB50E900E43716FD7CC1966428DD0CF",
-               "1EDC020CFC4AF19B625C52E20B66D6AE672821CCC461E8A9C457A3B2955657F7",
-               "FC0616A66A2B0589CA513F3341D4EA51E782C4601E5072308478E3CC19264640",
-               "19FC607B5DE1B64681A676EC1ED5507B9555B0E098CD9D898320297DE1A64033",
-               "5E128D3FC990074E35687387A14AA12D9FD287E5AB57CB9B2FD83DE635DF5CA9",
-               "DE72820F3981770F2AA8770BC233B80661F1A452819D8529008875FF8DED87A9",
-               "3ACB84BEE2C45556351FF60FD787D235C9CF5623FB8A35B01446B773598E7CC0",
-               "0DD3A8DF69874148057F1F2BF305442FF2E89A76A08B4CC8C051E2ED69B874F3",
-               "4AE9A9C4F12A5BD0355037DA40A0B145420A2168A9FEDE43E643BD13062F8ECE",
-               "08CBF8CFFEC207F5AC4E4F24BC447011FD8C79D25B344281FBFB4732D7058ED4",
-               "779B2577C5C4BAED6657421448EA506BBF50F86BE363E0924127C4EA17A58BBE"
-            ],
-            "peers" : 2,
-            "timeouts" : 0
-         }
-      },
-      "status" : "success"
-   }
+  "result" : {
+    "info" : {
+        "348928" : {
+          "hash" : "C26D432B06F84861BCACD7942EDC3FE0B2E1DEB966A9E516A0FD275A375C2010",
+          "have_header" : true,
+          "have_state" : false,
+          "have_transactions" : true,
+          "needed_state_hashes" : [
+              "BF8DC6B1E10D1D3565BF0649075D22EBFD34F751AFCC0E53E81D74786BC88922",
+              "34E37A71CB51A12C73A435250E6A6349F7884C7EEBA6B88FA31F0244E967E88F",
+              "BFB7D3008A7D61FD6A0538D1C2E70CFB94CE8DC66606319C372F278A48629765",
+              "41C0C61D701FB1EA586F0EF1FC7A91FEC476D979589DA60507F05C13F7C21975",
+              "6DDE8840A2C3C7FF05E5FFEE4D06408694C16A8357338FE0C4581DC3D8A00BBA",
+              "6C69D833B582C849917806FA009518832BB50E900E43716FD7CC1966428DD0CF",
+              "1EDC020CFC4AF19B625C52E20B66D6AE672821CCC461E8A9C457A3B2955657F7",
+              "FC0616A66A2B0589CA513F3341D4EA51E782C4601E5072308478E3CC19264640",
+              "19FC607B5DE1B64681A676EC1ED5507B9555B0E098CD9D898320297DE1A64033",
+              "5E128D3FC990074E35687387A14AA12D9FD287E5AB57CB9B2FD83DE635DF5CA9",
+              "DE72820F3981770F2AA8770BC233B80661F1A452819D8529008875FF8DED87A9",
+              "3ACB84BEE2C45556351FF60FD787D235C9CF5623FB8A35B01446B773598E7CC0",
+              "0DD3A8DF69874148057F1F2BF305442FF2E89A76A08B4CC8C051E2ED69B874F3",
+              "4AE9A9C4F12A5BD0355037DA40A0B145420A2168A9FEDE43E643BD13062F8ECE",
+              "08CBF8CFFEC207F5AC4E4F24BC447011FD8C79D25B344281FBFB4732D7058ED4",
+              "779B2577C5C4BAED6657421448EA506BBF50F86BE363E0924127C4EA17A58BBE"
+          ],
+          "peers" : 2,
+          "timeouts" : 0
+        }
+    },
+    "status" : "success"
+  }
 }
 ```
 {% /tab %}

docs/references/http-websocket-apis/admin-api-methods/status-and-debugging-methods/get_counts.md

@@ -1,13 +1,11 @@
 ---
-html: get_counts.html
-parent: status-and-debugging-methods.html
 seo:
     description: Get statistics about the server's internals and memory usage.
 labels:
-  - Core Server
+    - Core Server
 ---
 # get_counts
-[[Source]](https://github.com/XRPLF/rippled/blob/c7118a183a660648aa88a3546a6b2c5bce858440/src/ripple/rpc/handlers/GetCounts.cpp "Source")
+[[Source]](https://github.com/XRPLF/rippled/blob/master/src/xrpld/rpc/handlers/GetCounts.cpp "Source")
 
 The `get_counts` command provides various stats about the health of the server, mostly the number of objects of different types that it currently holds in memory.
 

docs/references/http-websocket-apis/admin-api-methods/status-and-debugging-methods/print.md

@@ -1,13 +1,11 @@
 ---
-html: print.html
-parent: status-and-debugging-methods.html
 seo:
     description: Get information about internal subsystems.
 labels:
-  - Core Server
+    - Core Server
 ---
 # print
-[[Source]](https://github.com/XRPLF/rippled/blob/315a8b6b602798a4cff4d8e1911936011e12abdb/src/ripple/rpc/handlers/Print.cpp "Source")
+[[Source]](https://github.com/XRPLF/rippled/blob/master/src/xrpld/rpc/handlers/Print.cpp "Source")
 
 The `print` command returns the current status of various internal subsystems, including peers, the ledger cleaner, and the resource manager.
 
@@ -49,183 +47,183 @@ Loading: "/etc/rippled.cfg"
 Connecting to 127.0.0.1:5005
 
 {
-   "result" : {
-      "app" : {
-         "ledgercleaner" : {
-            "status" : "idle"
-         },
-         "peers" : {
-            "peerfinder" : {
-               "bootcache" : {
-                  "entries" : 109
-               },
-               "config" : {
-                  "auto_connect" : "true",
-                  "features" : "",
-                  "max_peers" : 21,
-                  "out_peers" : 10,
-                  "port" : 51235,
-                  "want_incoming" : "true"
-               },
-               "counts" : {
-                  "accept" : 0,
-                  "close" : 0,
-                  "cluster" : "0",
-                  "connect" : 0,
-                  "fixed" : "0",
-                  "in" : "0/11",
-                  "out" : "10/10",
-                  "total" : "10"
-               },
-               "fixed" : 0,
-               "livecache" : {
-                  "entries" : [
-                     {
-                        "address" : "23.239.3.247:51235",
-                        "expires" : "30000000000 nanoseconds",
-                        "hops" : 2
-                     },
-                     {
-                        "address" : "192.170.145.88:51235",
-                        "expires" : "30000000000 nanoseconds",
-                        "hops" : 1
-                     },
-                     {
-                        "address" : "198.204.238.130:51235",
-                        "expires" : "26000024558 nanoseconds",
-                        "hops" : 1
-                     },
-                     {
-                        "address" : "203.127.12.115:51235",
-                        "expires" : "26000024558 nanoseconds",
-                        "hops" : 2
-                     },
-                     {
-                        "address" : "212.83.147.67:51235",
-                        "expires" : "26000024558 nanoseconds",
-                        "hops" : 2
-                     }
-                  ],
-                  "hist" : "0, 10, 74, 10, 0, 0, 0, 0",
-                  "size" : "94"
-               },
-               "peers" : [
-                  {
-                     "local_address" : "10.1.10.78:48923",
-                     "remote_address" : "52.24.43.83:51235",
-                     "state" : "active"
-                  },
-                  {
-                     "local_address" : "10.1.10.78:50004",
-                     "remote_address" : "52.26.205.197:51235",
-                     "state" : "active"
-                  },
-                  {
-                     "local_address" : "10.1.10.78:37019",
-                     "remote_address" : "168.1.60.132:51235",
-                     "state" : "active"
-                  },
-                  {
-                     "local_address" : "10.1.10.78:38775",
-                     "remote_address" : "192.170.145.88:51235",
-                     "state" : "active"
-                  },
-                  {
-                     "local_address" : "10.1.10.78:34793",
-                     "remote_address" : "198.204.238.130:51235",
-                     "state" : "active"
-                  }
-               ]
-            }
-         },
-         "resource" : {
-            "admin" : [
-               {
-                  "balance" : 0,
-                  "count" : 1,
-                  "name" : "\"127.0.0.1\""
-               }
-            ],
-            "inactive" : [],
-            "inbound" : [],
-            "outbound" : [
-               {
-                  "balance" : 23,
-                  "count" : 1,
-                  "name" : "93.190.138.234:51235"
-               },
-               {
-                  "balance" : 35,
-                  "count" : 1,
-                  "name" : "198.204.238.130:51235"
-               },
-               {
-                  "balance" : 31,
-                  "count" : 1,
-                  "name" : "52.26.205.197:51235"
-               },
-               {
-                  "balance" : 32,
-                  "count" : 1,
-                  "name" : "54.186.73.52:51235"
-               },
-               {
-                  "balance" : 15,
-                  "count" : 1,
-                  "name" : "72.251.233.164:51235"
-               }
-            ]
-         },
-         "server" : {
-            "active" : "2",
-            "hist" : "16",
-            "history" : [
-               {
-                  "bytes_in" : "214",
-                  "bytes_out" : "11688",
-                  "elapsed" : "0 seconds",
-                  "id" : "16",
-                  "requests" : 1,
-                  "when" : "2015-Jun-16 16:33:50"
-               },
-               {
-                  "bytes_in" : "214",
-                  "bytes_out" : "11431",
-                  "elapsed" : "0 seconds",
-                  "id" : "15",
-                  "requests" : 1,
-                  "when" : "2015-Jun-16 16:11:59"
-               },
-               {
-                  "bytes_in" : "227",
-                  "bytes_out" : "337",
-                  "elapsed" : "0 seconds",
-                  "id" : "3",
-                  "requests" : 1,
-                  "when" : "2015-Jun-16 14:57:23"
-               },
-               {
-                  "bytes_in" : "214",
-                  "bytes_out" : "2917",
-                  "elapsed" : "0 seconds",
-                  "id" : "2",
-                  "requests" : 1,
-                  "when" : "2015-Jun-16 12:39:29"
-               },
-               {
-                  "bytes_in" : "220",
-                  "bytes_out" : "1426",
-                  "elapsed" : "0 seconds",
-                  "id" : "1",
-                  "requests" : 1,
-                  "when" : "2015-Jun-16 12:39:13"
-               }
-            ]
-         },
-         "validators" : {}
-      },
-      "status" : "success"
-   }
+  "result" : {
+    "app" : {
+        "ledgercleaner" : {
+          "status" : "idle"
+        },
+        "peers" : {
+          "peerfinder" : {
+              "bootcache" : {
+                "entries" : 109
+              },
+              "config" : {
+                "auto_connect" : "true",
+                "features" : "",
+                "max_peers" : 21,
+                "out_peers" : 10,
+                "port" : 51235,
+                "want_incoming" : "true"
+              },
+              "counts" : {
+                "accept" : 0,
+                "close" : 0,
+                "cluster" : "0",
+                "connect" : 0,
+                "fixed" : "0",
+                "in" : "0/11",
+                "out" : "10/10",
+                "total" : "10"
+              },
+              "fixed" : 0,
+              "livecache" : {
+                "entries" : [
+                    {
+                      "address" : "23.239.3.247:51235",
+                      "expires" : "30000000000 nanoseconds",
+                      "hops" : 2
+                    },
+                    {
+                      "address" : "192.170.145.88:51235",
+                      "expires" : "30000000000 nanoseconds",
+                      "hops" : 1
+                    },
+                    {
+                      "address" : "198.204.238.130:51235",
+                      "expires" : "26000024558 nanoseconds",
+                      "hops" : 1
+                    },
+                    {
+                      "address" : "203.127.12.115:51235",
+                      "expires" : "26000024558 nanoseconds",
+                      "hops" : 2
+                    },
+                    {
+                      "address" : "212.83.147.67:51235",
+                      "expires" : "26000024558 nanoseconds",
+                      "hops" : 2
+                    }
+                ],
+                "hist" : "0, 10, 74, 10, 0, 0, 0, 0",
+                "size" : "94"
+              },
+              "peers" : [
+                {
+                    "local_address" : "10.1.10.78:48923",
+                    "remote_address" : "52.24.43.83:51235",
+                    "state" : "active"
+                },
+                {
+                    "local_address" : "10.1.10.78:50004",
+                    "remote_address" : "52.26.205.197:51235",
+                    "state" : "active"
+                },
+                {
+                    "local_address" : "10.1.10.78:37019",
+                    "remote_address" : "168.1.60.132:51235",
+                    "state" : "active"
+                },
+                {
+                    "local_address" : "10.1.10.78:38775",
+                    "remote_address" : "192.170.145.88:51235",
+                    "state" : "active"
+                },
+                {
+                    "local_address" : "10.1.10.78:34793",
+                    "remote_address" : "198.204.238.130:51235",
+                    "state" : "active"
+                }
+              ]
+          }
+        },
+        "resource" : {
+          "admin" : [
+              {
+                "balance" : 0,
+                "count" : 1,
+                "name" : "\"127.0.0.1\""
+              }
+          ],
+          "inactive" : [],
+          "inbound" : [],
+          "outbound" : [
+              {
+                "balance" : 23,
+                "count" : 1,
+                "name" : "93.190.138.234:51235"
+              },
+              {
+                "balance" : 35,
+                "count" : 1,
+                "name" : "198.204.238.130:51235"
+              },
+              {
+                "balance" : 31,
+                "count" : 1,
+                "name" : "52.26.205.197:51235"
+              },
+              {
+                "balance" : 32,
+                "count" : 1,
+                "name" : "54.186.73.52:51235"
+              },
+              {
+                "balance" : 15,
+                "count" : 1,
+                "name" : "72.251.233.164:51235"
+              }
+          ]
+        },
+        "server" : {
+          "active" : "2",
+          "hist" : "16",
+          "history" : [
+              {
+                "bytes_in" : "214",
+                "bytes_out" : "11688",
+                "elapsed" : "0 seconds",
+                "id" : "16",
+                "requests" : 1,
+                "when" : "2015-Jun-16 16:33:50"
+              },
+              {
+                "bytes_in" : "214",
+                "bytes_out" : "11431",
+                "elapsed" : "0 seconds",
+                "id" : "15",
+                "requests" : 1,
+                "when" : "2015-Jun-16 16:11:59"
+              },
+              {
+                "bytes_in" : "227",
+                "bytes_out" : "337",
+                "elapsed" : "0 seconds",
+                "id" : "3",
+                "requests" : 1,
+                "when" : "2015-Jun-16 14:57:23"
+              },
+              {
+                "bytes_in" : "214",
+                "bytes_out" : "2917",
+                "elapsed" : "0 seconds",
+                "id" : "2",
+                "requests" : 1,
+                "when" : "2015-Jun-16 12:39:29"
+              },
+              {
+                "bytes_in" : "220",
+                "bytes_out" : "1426",
+                "elapsed" : "0 seconds",
+                "id" : "1",
+                "requests" : 1,
+                "when" : "2015-Jun-16 12:39:13"
+              }
+          ]
+        },
+        "validators" : {}
+    },
+    "status" : "success"
+  }
 }
 
 ```

docs/references/http-websocket-apis/admin-api-methods/status-and-debugging-methods/validator_info.md

@@ -1,14 +1,12 @@
 ---
-html: validator_info.html
-parent: status-and-debugging-methods.html
 seo:
     description: Get the server's validation settings, if configured as a validator.
 labels:
-  - コアサーバ
-  - ブロックチェーン
+    - Core Server
+    - Blockchain
 ---
 # validator_info
-[[Source]](https://github.com/XRPLF/rippled/blob/master/src/ripple/rpc/handlers/ValidatorInfo.cpp "Source")
+[[Source]](https://github.com/XRPLF/rippled/blob/master/src/xrpld/rpc/handlers/ValidatorInfo.cpp "Source")
 
 The {% code-page-name /%} method returns the current validator settings of the server, if it is configured as a validator.
 

docs/references/http-websocket-apis/admin-api-methods/status-and-debugging-methods/validator_list_sites.md

@@ -1,14 +1,12 @@
 ---
-html: validator_list_sites.html
-parent: status-and-debugging-methods.html
 seo:
     description: Get information about sites that publish validator lists.
 labels:
-  - Core Server
-  - Blockchain
+    - Core Server
+    - Blockchain
 ---
 # validator_list_sites
-[[Source]](https://github.com/XRPLF/rippled/blob/master/src/ripple/rpc/handlers/ValidatorListSites.cpp "Source")
+[[Source]](https://github.com/XRPLF/rippled/blob/master/src/xrpld/rpc/handlers/ValidatorListSites.cpp "Source")
 
 The `validator_list_sites` command returns status information of sites serving validator lists.
 

docs/references/http-websocket-apis/admin-api-methods/status-and-debugging-methods/validators.md

@@ -1,14 +1,12 @@
 ---
-html: validators.html
-parent: status-and-debugging-methods.html
 seo:
     description: Get information about the current validators.
 labels:
-  - Core Server
-  - Blockchain
+    - Core Server
+    - Blockchain
 ---
 # validators
-[[Source]](https://github.com/XRPLF/rippled/blob/master/src/ripple/rpc/handlers/Validators.cpp "Source")
+[[Source]](https://github.com/XRPLF/rippled/blob/master/src/xrpld/rpc/handlers/Validators.cpp "Source")
 
 The `validators` command returns human readable information about the current list of published and [trusted validators](../../../../concepts/consensus-protocol/index.md#trust-based-validation) used by the server.