fix: workaround soci's overly zealous boost

fixEmptyDID -> featureDID

.clang-format

@@ -45,9 +45,11 @@ DisableFormat:   false
 ExperimentalAutoDetectBinPacking: false
 ForEachMacros:   [ Q_FOREACH,  BOOST_FOREACH ]
 IncludeCategories:
-  - Regex:           '^<(BeastConfig)'
+  - Regex:           '^<(test)/'
     Priority:        0
-  - Regex:           '^<(ripple)/'
+  - Regex:           '^<(xrpld)/'
+    Priority:        1
+  - Regex:           '^<(xrpl)/'
     Priority:        2
   - Regex:           '^<(boost)/'
     Priority:        3
@@ -56,6 +58,7 @@ IncludeCategories:
 IncludeIsMainRegex: '$'
 IndentCaseLabels: true
 IndentFunctionDeclarationAfterType: false
+IndentRequiresClause: true
 IndentWidth:     4
 IndentWrappedFunctionNames: false
 KeepEmptyLinesAtTheStartOfBlocks: false
@@ -71,6 +74,7 @@ PenaltyExcessCharacter: 1000000
 PenaltyReturnTypeOnItsOwnLine: 200
 PointerAlignment: Left
 ReflowComments:  true
+RequiresClausePosition: OwnLine
 SortIncludes:    true
 SpaceAfterCStyleCast: false
 SpaceBeforeAssignmentOperators: true

.git-blame-ignore-revs

@@ -2,3 +2,7 @@
 # To use it by default in git blame:
 # git config blame.ignoreRevsFile .git-blame-ignore-revs
 50760c693510894ca368e90369b0cc2dabfd07f3
+e2384885f5f630c8f0ffe4bf21a169b433a16858
+241b9ddde9e11beb7480600fd5ed90e1ef109b21
+760f16f56835663d9286bd29294d074de26a7ba6
+0eebe6a5f4246fced516d52b83ec4e7f47373edd

.github/actions/xahau-configure-ccache/action.yml

@@ -0,0 +1,31 @@
+name: 'Configure ccache'
+description: 'Sets up ccache with consistent configuration'
+
+inputs:
+  max_size:
+    description: 'Maximum cache size'
+    required: false
+    default: '2G'
+  hash_dir:
+    description: 'Whether to include directory paths in hash'
+    required: false
+    default: 'true'
+  compiler_check:
+    description: 'How to check compiler for changes'
+    required: false
+    default: 'content'
+
+runs:
+  using: 'composite'
+  steps:
+    - name: Configure ccache
+      shell: bash
+      run: |
+        mkdir -p ~/.ccache
+        export CONF_PATH="${CCACHE_CONFIGPATH:-${CCACHE_DIR:-$HOME/.ccache}/ccache.conf}"
+        mkdir -p $(dirname "$CONF_PATH")
+        echo "max_size = ${{ inputs.max_size }}" > "$CONF_PATH"
+        echo "hash_dir = ${{ inputs.hash_dir }}" >> "$CONF_PATH"
+        echo "compiler_check = ${{ inputs.compiler_check }}" >> "$CONF_PATH"
+        ccache -p # Print config for verification
+        ccache -z # Zero statistics before the build

.github/actions/xahau-ga-build/action.yml

@@ -0,0 +1,110 @@
+name: build
+description: 'Builds the project with ccache integration'
+
+inputs:
+  generator:
+    description: 'CMake generator to use'
+    required: true
+  configuration:
+    description: 'Build configuration (Debug, Release, etc.)'
+    required: true
+  build_dir:
+    description: 'Directory to build in'
+    required: false
+    default: '.build'
+  cc:
+    description: 'C compiler to use'
+    required: false
+    default: ''
+  cxx:
+    description: 'C++ compiler to use'
+    required: false
+    default: ''
+  compiler-id:
+    description: 'Unique identifier for compiler/version combination used for cache keys'
+    required: false
+    default: ''
+  cache_version:
+    description: 'Cache version for invalidation'
+    required: false
+    default: '1'
+  ccache_enabled:
+    description: 'Whether to use ccache'
+    required: false
+    default: 'true'
+  main_branch:
+    description: 'Main branch name for restore keys'
+    required: false
+    default: 'dev'
+
+runs:
+  using: 'composite'
+  steps:
+    - name: Generate safe branch name
+      if: inputs.ccache_enabled == 'true'
+      id: safe-branch
+      shell: bash
+      run: |
+        SAFE_BRANCH=$(echo "${{ github.ref_name }}" | tr -c 'a-zA-Z0-9_.-' '-')
+        echo "name=${SAFE_BRANCH}" >> $GITHUB_OUTPUT
+
+    - name: Restore ccache directory
+      if: inputs.ccache_enabled == 'true'
+      id: ccache-restore
+      uses: actions/cache/restore@v4
+      with:
+        path: ~/.ccache
+        key: ${{ runner.os }}-ccache-v${{ inputs.cache_version }}-${{ inputs.compiler-id }}-${{ inputs.configuration }}-${{ steps.safe-branch.outputs.name }}
+        restore-keys: |
+          ${{ runner.os }}-ccache-v${{ inputs.cache_version }}-${{ inputs.compiler-id }}-${{ inputs.configuration }}-${{ inputs.main_branch }}
+          ${{ runner.os }}-ccache-v${{ inputs.cache_version }}-${{ inputs.compiler-id }}-${{ inputs.configuration }}-
+          ${{ runner.os }}-ccache-v${{ inputs.cache_version }}-${{ inputs.compiler-id }}-
+          ${{ runner.os }}-ccache-v${{ inputs.cache_version }}-
+
+    - name: Configure project
+      shell: bash
+      run: |
+        mkdir -p ${{ inputs.build_dir }}
+        cd ${{ inputs.build_dir }}
+        
+        # Set compiler environment variables if provided
+        if [ -n "${{ inputs.cc }}" ]; then
+          export CC="${{ inputs.cc }}"
+        fi
+        
+        if [ -n "${{ inputs.cxx }}" ]; then
+          export CXX="${{ inputs.cxx }}"
+        fi
+        
+        # Configure ccache launcher args
+        CCACHE_ARGS=""
+        if [ "${{ inputs.ccache_enabled }}" = "true" ]; then
+          CCACHE_ARGS="-DCMAKE_C_COMPILER_LAUNCHER=ccache -DCMAKE_CXX_COMPILER_LAUNCHER=ccache"
+        fi
+        
+        # Run CMake configure
+        cmake .. \
+          -G "${{ inputs.generator }}" \
+          $CCACHE_ARGS \
+          -DCMAKE_TOOLCHAIN_FILE:FILEPATH=build/generators/conan_toolchain.cmake \
+          -DCMAKE_BUILD_TYPE=${{ inputs.configuration }} \
+          -Dtests=TRUE \
+          -Dxrpld=TRUE
+
+    - name: Build project
+      shell: bash
+      run: |
+        cd ${{ inputs.build_dir }}
+        cmake --build . --config ${{ inputs.configuration }} --parallel $(nproc)
+
+    - name: Show ccache statistics
+      if: inputs.ccache_enabled == 'true'
+      shell: bash
+      run: ccache -s
+
+    - name: Save ccache directory
+      if: inputs.ccache_enabled == 'true'
+      uses: actions/cache/save@v4
+      with:
+        path: ~/.ccache
+        key: ${{ steps.ccache-restore.outputs.cache-primary-key }}

.github/actions/xahau-ga-dependencies/action.yml

@@ -0,0 +1,86 @@
+name: dependencies
+description: 'Installs build dependencies with caching'
+
+inputs:
+  configuration:
+    description: 'Build configuration (Debug, Release, etc.)'
+    required: true
+  build_dir:
+    description: 'Directory to build dependencies in'
+    required: false
+    default: '.build'
+  compiler-id:
+    description: 'Unique identifier for compiler/version combination used for cache keys'
+    required: false
+    default: ''
+  cache_version:
+    description: 'Cache version for invalidation'
+    required: false
+    default: '1'
+  cache_enabled:
+    description: 'Whether to use caching'
+    required: false
+    default: 'true'
+  main_branch:
+    description: 'Main branch name for restore keys'
+    required: false
+    default: 'dev'
+
+outputs:
+  cache-hit:
+    description: 'Whether there was a cache hit'
+    value: ${{ steps.cache-restore-conan.outputs.cache-hit }}
+
+runs:
+  using: 'composite'
+  steps:
+    - name: Generate safe branch name
+      if: inputs.cache_enabled == 'true'
+      id: safe-branch
+      shell: bash
+      run: |
+        SAFE_BRANCH=$(echo "${{ github.ref_name }}" | tr -c 'a-zA-Z0-9_.-' '-')
+        echo "name=${SAFE_BRANCH}" >> $GITHUB_OUTPUT
+
+    - name: Restore Conan cache
+      if: inputs.cache_enabled == 'true'
+      id: cache-restore-conan
+      uses: actions/cache/restore@v4
+      with:
+        path: |
+          ~/.conan
+          ~/.conan2
+        key: ${{ runner.os }}-conan-v${{ inputs.cache_version }}-${{ inputs.compiler-id }}-${{ hashFiles('**/conanfile.txt', '**/conanfile.py') }}-${{ inputs.configuration }}
+        restore-keys: |
+          ${{ runner.os }}-conan-v${{ inputs.cache_version }}-${{ inputs.compiler-id }}-${{ hashFiles('**/conanfile.txt', '**/conanfile.py') }}-
+          ${{ runner.os }}-conan-v${{ inputs.cache_version }}-${{ inputs.compiler-id }}-
+          ${{ runner.os }}-conan-v${{ inputs.cache_version }}-
+
+    - name: Export custom recipes
+      shell: bash
+      run: |
+        conan export external/snappy snappy/1.1.10@
+        conan export external/soci soci/4.0.3@
+
+    - name: Install dependencies
+      shell: bash
+      run: |
+        # Create build directory
+        mkdir -p ${{ inputs.build_dir }}
+        cd ${{ inputs.build_dir }}
+        
+        # Install dependencies using conan
+        conan install \
+          --output-folder . \
+          --build missing \
+          --settings build_type=${{ inputs.configuration }} \
+          ..
+
+    - name: Save Conan cache
+      if: inputs.cache_enabled == 'true' && steps.cache-restore-conan.outputs.cache-hit != 'true'
+      uses: actions/cache/save@v4
+      with:
+        path: |
+          ~/.conan
+          ~/.conan2
+        key: ${{ steps.cache-restore-conan.outputs.cache-primary-key }}

.github/pull_request_template.md

@@ -33,6 +33,7 @@ Please check [x] relevant options, delete irrelevant ones.
 - [ ] New feature (non-breaking change which adds functionality)
 - [ ] Breaking change (fix or feature that would cause existing functionality to not work as expected)
 - [ ] Refactor (non-breaking change that only restructures code)
+- [ ] Performance (increase or change in throughput and/or latency)
 - [ ] Tests (you added tests for code that already exists, or your new feature included in this PR)
 - [ ] Documentation update
 - [ ] Chore (no impact to binary, e.g. `.gitignore`, formatting, dropping support for older tooling)
@@ -58,6 +59,12 @@ Please check [x] relevant options, delete irrelevant ones.
 ## Before / After
 If relevant, use this section for an English description of the change at a technical level.
 If this change affects an API, examples should be included here.
+
+For performance-impacting changes, please provide these details:
+1. Is this a new feature, bug fix, or improvement to existing functionality?
+2. What behavior/functionality does the change impact?
+3. In what processing can the impact be measured? Be as specific as possible - e.g. RPC client call, payment transaction that involves LOB, AMM, caching, DB operations, etc.
+4. Does this change affect concurrent processing - e.g. does it involve acquiring locks, multi-threaded processing, or async processing?
 -->
 
 <!--

.github/workflows/build-in-docker.yml

@@ -2,37 +2,94 @@ name: Build using Docker
 
 on:
   push:
-    branches: [ "dev", "candidate", "release", "jshooks" ]
+    branches: ["dev", "candidate", "release", "jshooks"]
   pull_request:
-    branches: [ "dev", "candidate", "release", "jshooks" ]
+    branches: ["dev", "candidate", "release", "jshooks"]
 
 concurrency:
-  group: ${{ github.workflow }}
-  cancel-in-progress: false
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+env:
+  DEBUG_BUILD_CONTAINERS_AFTER_CLEANUP: 1
 
 jobs:
   checkout:
     runs-on: [self-hosted, vanity]
+    outputs:
+      checkout_path: ${{ steps.vars.outputs.checkout_path }}
     steps:
-    - uses: actions/checkout@v4
-      with:
-        clean: false
-  checkpatterns:
-    runs-on: [self-hosted, vanity]
-    needs: checkout
-    steps:
-    - name: Check for suspicious patterns
-      run: /bin/bash suspicious_patterns.sh
+      - name: Prepare checkout path
+        id: vars
+        run: |
+          SAFE_BRANCH=$(echo "${{ github.ref_name }}" | sed -e 's/[^a-zA-Z0-9._-]/-/g')
+          CHECKOUT_PATH="${SAFE_BRANCH}-${{ github.sha }}"
+          echo "checkout_path=${CHECKOUT_PATH}" >> "$GITHUB_OUTPUT"
+
+      - uses: actions/checkout@v4
+        with:
+          path: ${{ steps.vars.outputs.checkout_path }}
+          clean: true
+          fetch-depth: 2 # Only get the last 2 commits, to avoid fetching all history
+
   build:
     runs-on: [self-hosted, vanity]
-    needs: checkpatterns
+    needs: [checkout]
+    defaults:
+      run:
+        working-directory: ${{ needs.checkout.outputs.checkout_path }}
     steps:
-    - name: Build using Docker
-      run: /bin/bash release-builder.sh
+      - name: Set Cleanup Script Path
+        run: |
+          echo "JOB_CLEANUP_SCRIPT=$(mktemp)" >> $GITHUB_ENV
+
+      - name: Build using Docker
+        run: /bin/bash release-builder.sh
+
+      - name: Stop Container (Cleanup)
+        if: always()
+        run: |
+          echo "Running cleanup script: $JOB_CLEANUP_SCRIPT"
+          /bin/bash -e -x "$JOB_CLEANUP_SCRIPT"
+          CLEANUP_EXIT_CODE=$?
+
+          if [[ "$CLEANUP_EXIT_CODE" -eq 0 ]]; then
+            echo "Cleanup script succeeded."
+            rm -f "$JOB_CLEANUP_SCRIPT"
+            echo "Cleanup script removed."
+          else
+            echo "⚠️ Cleanup script failed! Keeping for debugging: $JOB_CLEANUP_SCRIPT"
+          fi
+
+          if [[ "${DEBUG_BUILD_CONTAINERS_AFTER_CLEANUP}" == "1" ]]; then
+            echo "🔍 Checking for leftover containers..."
+            BUILD_CONTAINERS=$(docker ps --format '{{.Names}}' | grep '^xahaud_cached_builder' || echo "")
+
+            if [[ -n "$BUILD_CONTAINERS" ]]; then
+              echo "⚠️ WARNING: Some build containers are still running"
+              echo "$BUILD_CONTAINERS"
+            else
+              echo "✅ No build containers found"
+            fi
+          fi
+
   tests:
     runs-on: [self-hosted, vanity]
-    needs: build
+    needs: [build, checkout]
+    defaults:
+      run:
+        working-directory: ${{ needs.checkout.outputs.checkout_path }}
     steps:
-    - name: Unit tests
-      run: /bin/bash docker-unit-tests.sh
+      - name: Unit tests
+        run: /bin/bash docker-unit-tests.sh
 
+  cleanup:
+    runs-on: [self-hosted, vanity]
+    needs: [tests, checkout]
+    if: always()
+    steps:
+      - name: Cleanup workspace
+        run: |
+          CHECKOUT_PATH="${{ needs.checkout.outputs.checkout_path }}"
+          echo "Cleaning workspace for ${CHECKOUT_PATH}"
+          rm -rf "${{ github.workspace }}/${CHECKOUT_PATH}"

.github/workflows/clang-format.yml

@@ -4,11 +4,11 @@ on: [push, pull_request]
 
 jobs:
   check:
-    runs-on: ubuntu-20.04
+    runs-on: ubuntu-24.04
     env:
-      CLANG_VERSION: 10
+      CLANG_VERSION: 18
     steps:
-    - uses: actions/checkout@v3
+    - uses: actions/checkout@v4
     - name: Install clang-format
       run: |
         codename=$( lsb_release --codename --short )
@@ -19,10 +19,8 @@ jobs:
         wget -O - https://apt.llvm.org/llvm-snapshot.gpg.key | sudo apt-key add
         sudo apt-get update
         sudo apt-get install clang-format-${CLANG_VERSION}
-    - name: Format src/ripple
-      run: find src/ripple -type f \( -name '*.cpp' -o -name '*.h' -o -name '*.ipp' \) -print0 | xargs -0 clang-format-${CLANG_VERSION} -i
-    - name: Format src/test
-      run: find src/test -type f \( -name '*.cpp' -o -name '*.h' -o -name '*.ipp' \) -print0 | xargs -0 clang-format-${CLANG_VERSION} -i
+    - name: Format first-party sources
+      run: find include src -type f \( -name '*.cpp' -o -name '*.hpp' -o -name '*.h' -o -name '*.ipp' \) -not -path "src/magic/magic_enum.h" -exec clang-format-${CLANG_VERSION} -i {} +
     - name: Check for differences
       id: assert
       run: |
@@ -52,7 +50,7 @@ jobs:
           To fix it, you can do one of two things:
           1. Download and apply the patch generated as an artifact of this
              job to your repo, commit, and push.
-          2. Run 'git-clang-format --extensions c,cpp,h,cxx,ipp dev'
+          2. Run 'git-clang-format --extensions cpp,h,hpp,ipp develop'
              in your repo, commit, and push.
       run: |
         echo "${PREAMBLE}"

.github/workflows/doxygen.yml

@@ -1,25 +0,0 @@
-name: Build and publish Doxygen documentation
-on:
-  push:
-    branches:
-      - dev
-
-jobs:
-  job:
-    runs-on: ubuntu-latest
-    container:
-      image: docker://rippleci/rippled-ci-builder:2944b78d22db
-    steps:
-      - name: checkout
-        uses: actions/checkout@v2
-      - name: build
-        run: |
-          mkdir build
-          cd build
-          cmake -DBoost_NO_BOOST_CMAKE=ON ..
-          cmake --build . --target docs --parallel $(nproc)
-      - name: publish
-        uses: peaceiris/actions-gh-pages@v3
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          publish_dir: build/docs/html

.github/workflows/instrumentation.yml

@@ -0,0 +1,103 @@
+name: instrumentation
+on:
+  pull_request:
+  push:
+    # If the branches list is ever changed, be sure to change it on all
+    # build/test jobs (nix, macos, windows, instrumentation)
+    branches:
+      # Always build the package branches
+      - develop
+      - release
+      - master
+      # Branches that opt-in to running
+      - 'ci/**'
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+jobs:
+
+  # NOTE we are not using dependencies built inside nix because nix is lagging
+  # with compiler versions. Instrumentation requires clang version 16 or later
+
+  instrumentation-build:
+    env:
+      CLANG_RELEASE: 16
+    strategy:
+      fail-fast: false
+    runs-on: [self-hosted, heavy]
+    container: debian:bookworm
+    steps:
+        - name: install prerequisites
+          env:
+            DEBIAN_FRONTEND: noninteractive
+          run: |
+            apt-get update
+            apt-get install --yes --no-install-recommends \
+              clang-${CLANG_RELEASE} clang++-${CLANG_RELEASE} \
+              python3-pip python-is-python3 make cmake git wget
+            apt-get clean
+            update-alternatives --install \
+              /usr/bin/clang clang /usr/bin/clang-${CLANG_RELEASE} 100 \
+              --slave /usr/bin/clang++ clang++ /usr/bin/clang++-${CLANG_RELEASE}
+            update-alternatives --auto clang
+            pip install --no-cache --break-system-packages "conan<2"
+
+        - name: checkout
+          uses: actions/checkout@v4
+
+        - name: prepare environment
+          run: |
+            mkdir ${GITHUB_WORKSPACE}/.build
+            echo "SOURCE_DIR=$GITHUB_WORKSPACE" >> $GITHUB_ENV
+            echo "BUILD_DIR=$GITHUB_WORKSPACE/.build" >> $GITHUB_ENV
+            echo "CC=/usr/bin/clang" >> $GITHUB_ENV
+            echo "CXX=/usr/bin/clang++" >> $GITHUB_ENV
+
+        - name: configure Conan
+          run: |
+            conan profile new --detect default
+            conan profile update settings.compiler=clang default
+            conan profile update settings.compiler.version=${CLANG_RELEASE} default
+            conan profile update settings.compiler.libcxx=libstdc++11 default
+            conan profile update settings.compiler.cppstd=20 default
+            conan profile update options.rocksdb=False default
+            conan profile update \
+              'conf.tools.build:compiler_executables={"c": "/usr/bin/clang", "cpp": "/usr/bin/clang++"}' default
+            conan profile update 'env.CXXFLAGS="-DBOOST_ASIO_DISABLE_CONCEPTS"' default
+            conan profile update 'conf.tools.build:cxxflags+=["-DBOOST_ASIO_DISABLE_CONCEPTS"]' default
+            conan export external/snappy snappy/1.1.10@
+            conan export external/soci soci/4.0.3@
+
+        - name: build dependencies
+          run: |
+            cd ${BUILD_DIR}
+            conan install ${SOURCE_DIR} \
+              --output-folder ${BUILD_DIR} \
+              --install-folder ${BUILD_DIR} \
+              --build missing \
+              --settings build_type=Debug
+
+        - name: build with instrumentation
+          run: |
+            cd ${BUILD_DIR}
+            cmake -S ${SOURCE_DIR} -B ${BUILD_DIR} \
+              -Dvoidstar=ON \
+              -Dtests=ON \
+              -Dxrpld=ON \
+              -DCMAKE_BUILD_TYPE=Debug \
+              -DSECP256K1_BUILD_BENCHMARK=OFF \
+              -DSECP256K1_BUILD_TESTS=OFF \
+              -DSECP256K1_BUILD_EXHAUSTIVE_TESTS=OFF \
+              -DCMAKE_TOOLCHAIN_FILE=${BUILD_DIR}/build/generators/conan_toolchain.cmake
+            cmake --build .  --parallel $(nproc)
+
+        - name: verify instrumentation enabled
+          run: |
+            cd ${BUILD_DIR}
+            ./rippled --version | grep libvoidstar
+
+        - name: run unit tests
+          run: |
+            cd ${BUILD_DIR}
+            ./rippled -u --unittest-jobs $(( $(nproc)/4 ))

.github/workflows/xahau-ga-macos.yml

@@ -0,0 +1,116 @@
+name: MacOS - GA Runner
+
+on:
+  push:
+    branches: ["dev", "candidate", "release"]
+  pull_request:
+    branches: ["dev", "candidate", "release"]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+jobs:
+  test:
+    strategy:
+      matrix:
+        generator:
+          - Ninja
+        configuration:
+          - Debug
+    runs-on: macos-15
+    env:
+      build_dir: .build
+      # Bump this number to invalidate all caches globally.
+      CACHE_VERSION: 1
+      MAIN_BRANCH_NAME: dev
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+
+      - name: Install Conan
+        run: |
+          brew install conan@1
+          # Add Conan 1 to the PATH for this job
+          echo "$(brew --prefix conan@1)/bin" >> $GITHUB_PATH
+
+      - name: Install Coreutils
+        run: |
+          brew install coreutils
+          echo "Num proc: $(nproc)"
+
+      - name: Install Ninja
+        if: matrix.generator == 'Ninja'
+        run: brew install ninja
+
+      - name: Install Python
+        run: |
+          if which python3 > /dev/null 2>&1; then
+              echo "Python 3 executable exists"
+              python3 --version
+          else
+              brew install python@3.12
+          fi
+          # Create 'python' symlink if it doesn't exist (for tools expecting 'python')
+          if ! which python > /dev/null 2>&1; then
+              sudo ln -sf $(which python3) /usr/local/bin/python
+          fi
+
+      - name: Install CMake
+        run: |
+          if which cmake > /dev/null 2>&1; then
+              echo "cmake executable exists"
+              cmake --version
+          else
+              brew install cmake
+          fi
+
+      - name: Install ccache
+        run: brew install ccache
+
+      - name: Configure ccache
+        uses: ./.github/actions/xahau-configure-ccache
+        with:
+          max_size: 2G
+          hash_dir: true
+          compiler_check: content
+
+      - name: Check environment
+        run: |
+          echo "PATH:"
+          echo "${PATH}" | tr ':' '\n'
+          which python && python --version || echo "Python not found"
+          which conan && conan --version || echo "Conan not found"
+          which cmake && cmake --version || echo "CMake not found"
+          clang --version
+          ccache --version
+          echo "---- Full Environment ----"
+          env
+
+      - name: Configure Conan
+        run: |
+          conan profile new default --detect || true # Ignore error if profile exists
+          conan profile update settings.compiler.cppstd=20 default
+
+      - name: Install dependencies
+        uses: ./.github/actions/xahau-ga-dependencies
+        with:
+          configuration: ${{ matrix.configuration }}
+          build_dir: ${{ env.build_dir }}
+          compiler-id: clang
+          cache_version: ${{ env.CACHE_VERSION }}
+          main_branch: ${{ env.MAIN_BRANCH_NAME }}
+
+      - name: Build
+        uses: ./.github/actions/xahau-ga-build
+        with:
+          generator: ${{ matrix.generator }}
+          configuration: ${{ matrix.configuration }}
+          build_dir: ${{ env.build_dir }}
+          compiler-id: clang
+          cache_version: ${{ env.CACHE_VERSION }}
+          main_branch: ${{ env.MAIN_BRANCH_NAME }}
+
+      - name: Test
+        run: |
+          ${{ env.build_dir }}/rippled --unittest --unittest-jobs $(nproc)

.github/workflows/xahau-ga-nix.yml

@@ -0,0 +1,123 @@
+name: Nix - GA Runner
+
+on:
+  push:
+    branches: ["dev", "candidate", "release", "nd-link-to-boost-2025-06-27"]
+  pull_request:
+    branches: ["dev", "candidate", "release"]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+jobs:
+  build-job:
+    runs-on: ubuntu-latest
+    outputs:
+      artifact_name: ${{ steps.set-artifact-name.outputs.artifact_name }}
+    strategy:
+      fail-fast: false
+      matrix:
+        compiler: [gcc]
+        configuration: [Debug]
+        include:
+          - compiler: gcc
+            cc: gcc-11
+            cxx: g++-11
+            compiler_id: gcc-11
+    env:
+      build_dir: .build
+      # Bump this number to invalidate all caches globally.
+      CACHE_VERSION: 1
+      MAIN_BRANCH_NAME: dev
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+
+      - name: Install build dependencies
+        run: |
+          sudo apt-get update
+          sudo apt-get install -y ninja-build ${{ matrix.cc }} ${{ matrix.cxx }} ccache
+          # Install specific Conan version needed
+          pip install --upgrade "conan<2"
+
+      - name: Configure ccache
+        uses: ./.github/actions/xahau-configure-ccache
+        with:
+          max_size: 2G
+          hash_dir: true
+          compiler_check: content
+
+      - name: Configure Conan
+        run: |
+          conan profile new default --detect || true # Ignore error if profile exists
+          conan profile update settings.compiler.cppstd=20 default
+          conan profile update settings.compiler=${{ matrix.compiler }} default
+          conan profile update settings.compiler.libcxx=libstdc++11 default
+          conan profile update env.CC=/usr/bin/${{ matrix.cc }} default
+          conan profile update env.CXX=/usr/bin/${{ matrix.cxx }} default
+          conan profile update conf.tools.build:compiler_executables='{"c": "/usr/bin/${{ matrix.cc }}", "cpp": "/usr/bin/${{ matrix.cxx }}"}' default
+
+          # Set correct compiler version based on matrix.compiler
+          if [ "${{ matrix.compiler }}" = "gcc" ]; then
+            conan profile update settings.compiler.version=11 default
+          elif [ "${{ matrix.compiler }}" = "clang" ]; then
+            conan profile update settings.compiler.version=14 default
+          fi
+          # Display profile for verification
+          conan profile show default
+
+      - name: Check environment
+        run: |
+          echo "PATH:"
+          echo "${PATH}" | tr ':' '\n'
+          which conan && conan --version || echo "Conan not found"
+          which cmake && cmake --version || echo "CMake not found"
+          which ${{ matrix.cc }} && ${{ matrix.cc }} --version || echo "${{ matrix.cc }} not found"
+          which ${{ matrix.cxx }} && ${{ matrix.cxx }} --version || echo "${{ matrix.cxx }} not found"
+          which ccache && ccache --version || echo "ccache not found"
+          echo "---- Full Environment ----"
+          env
+
+      - name: Install dependencies
+        uses: ./.github/actions/xahau-ga-dependencies
+        with:
+          configuration: ${{ matrix.configuration }}
+          build_dir: ${{ env.build_dir }}
+          compiler-id: ${{ matrix.compiler_id }}
+          cache_version: ${{ env.CACHE_VERSION }}
+          main_branch: ${{ env.MAIN_BRANCH_NAME }}
+
+      - name: Build
+        uses: ./.github/actions/xahau-ga-build
+        with:
+          generator: Ninja
+          configuration: ${{ matrix.configuration }}
+          build_dir: ${{ env.build_dir }}
+          cc: ${{ matrix.cc }}
+          cxx: ${{ matrix.cxx }}
+          compiler-id: ${{ matrix.compiler_id }}
+          cache_version: ${{ env.CACHE_VERSION }}
+          main_branch: ${{ env.MAIN_BRANCH_NAME }}
+
+      - name: Set artifact name
+        id: set-artifact-name
+        run: |
+          ARTIFACT_NAME="build-output-nix-${{ github.run_id }}-${{ matrix.compiler }}-${{ matrix.configuration }}"
+          echo "artifact_name=${ARTIFACT_NAME}" >> "$GITHUB_OUTPUT"
+          echo "Using artifact name: ${ARTIFACT_NAME}"
+
+      - name: Debug build directory
+        run: |
+          echo "Checking build directory contents: ${{ env.build_dir }}"
+          ls -la ${{ env.build_dir }} || echo "Build directory not found or empty"
+
+      - name: Run tests
+        run: |
+          # Ensure the binary exists before trying to run
+          if [ -f "${{ env.build_dir }}/rippled" ]; then
+            ${{ env.build_dir }}/rippled --unittest --unittest-jobs $(nproc)
+          else
+             echo "Error: rippled executable not found in ${{ env.build_dir }}"
+             exit 1
+          fi

.gitignore

@@ -114,3 +114,9 @@ pkg_out
 pkg
 CMakeUserPresets.json
 bld.rippled/
+
+generated
+.vscode
+
+# Suggested in-tree build directory
+/.build/

.pre-commit-config.yaml

@@ -1,6 +1,6 @@
 # .pre-commit-config.yaml
 repos:
 - repo: https://github.com/pre-commit/mirrors-clang-format
-  rev: v10.0.1
+  rev: v18.1.3
   hooks:
   - id: clang-format

API-CHANGELOG.md

@@ -0,0 +1,217 @@
+# API Changelog
+
+This changelog is intended to list all updates to the [public API methods](https://xrpl.org/public-api-methods.html).
+
+For info about how [API versioning](https://xrpl.org/request-formatting.html#api-versioning) works, including examples, please view the [XLS-22d spec](https://github.com/XRPLF/XRPL-Standards/discussions/54). For details about the implementation of API versioning, view the [implementation PR](https://github.com/XRPLF/rippled/pull/3155). API versioning ensures existing integrations and users continue to receive existing behavior, while those that request a higher API version will experience new behavior.
+
+The API version controls the API behavior you see. This includes what properties you see in responses, what parameters you're permitted to send in requests, and so on. You specify the API version in each of your requests. When a breaking change is introduced to the `rippled` API, a new version is released. To avoid breaking your code, you should set (or increase) your version when you're ready to upgrade.
+
+For a log of breaking changes, see the **API Version [number]** headings. In general, breaking changes are associated with a particular API Version number. For non-breaking changes, scroll to the **XRP Ledger version [x.y.z]** headings. Non-breaking changes are associated with a particular XRP Ledger (`rippled`) release.
+
+## API Version 2
+
+API version 2 is available in `rippled` version 2.0.0 and later. To use this API, clients specify `"api_version" : 2` in each request.
+
+#### Removed methods
+
+In API version 2, the following deprecated methods are no longer available: (https://github.com/XRPLF/rippled/pull/4759)
+
+- `tx_history` - Instead, use other methods such as `account_tx` or `ledger` with the `transactions` field set to `true`.
+- `ledger_header` - Instead, use the `ledger` method.
+
+#### Modifications to JSON transaction element in V2
+
+In API version 2, JSON elements for transaction output have been changed and made consistent for all methods which output transactions. (https://github.com/XRPLF/rippled/pull/4775)
+This helps to unify the JSON serialization format of transactions. (https://github.com/XRPLF/clio/issues/722, https://github.com/XRPLF/rippled/issues/4727)
+
+- JSON transaction element is named `tx_json`
+- Binary transaction element is named `tx_blob`
+- JSON transaction metadata element is named `meta`
+- Binary transaction metadata element is named `meta_blob`
+
+Additionally, these elements are now consistently available next to `tx_json` (i.e. sibling elements), where possible:
+
+- `hash` - Transaction ID. This data was stored inside transaction output in API version 1, but in API version 2 is a sibling element.
+- `ledger_index` - Ledger index (only set on validated ledgers)
+- `ledger_hash` - Ledger hash (only set on closed or validated ledgers)
+- `close_time_iso` - Ledger close time expressed in ISO 8601 time format (only set on validated ledgers)
+- `validated` - Bool element set to `true` if the transaction is in a validated ledger, otherwise `false`
+
+This change affects the following methods:
+
+- `tx` - Transaction data moved into element `tx_json` (was inline inside `result`) or, if binary output was requested, moved from `tx` to `tx_blob`. Renamed binary transaction metadata element (if it was requested) from `meta` to `meta_blob`. Changed location of `hash` and added new elements
+- `account_tx` - Renamed transaction element from `tx` to `tx_json`. Renamed binary transaction metadata element (if it was requested) from `meta` to `meta_blob`. Changed location of `hash` and added new elements
+- `transaction_entry` - Renamed transaction metadata element from `metadata` to `meta`. Changed location of `hash` and added new elements
+- `subscribe` - Renamed transaction element from `transaction` to `tx_json`. Changed location of `hash` and added new elements
+- `sign`, `sign_for`, `submit` and `submit_multisigned` - Changed location of `hash` element.
+
+#### Modification to `Payment` transaction JSON schema
+
+When reading Payments, the `Amount` field should generally **not** be used. Instead, use [delivered_amount](https://xrpl.org/partial-payments.html#the-delivered_amount-field) to see the amount that the Payment delivered. To clarify its meaning, the `Amount` field is being renamed to `DeliverMax`. (https://github.com/XRPLF/rippled/pull/4733)
+
+- In `Payment` transaction type, JSON RPC field `Amount` is renamed to `DeliverMax`. To enable smooth client transition, `Amount` is still handled, as described below: (https://github.com/XRPLF/rippled/pull/4733)
+  - On JSON RPC input (e.g. `submit_multisigned` etc. methods), `Amount` is recognized as an alias to `DeliverMax` for both API version 1 and version 2 clients.
+  - On JSON RPC input, submitting both `Amount` and `DeliverMax` fields is allowed _only_ if they are identical; otherwise such input is rejected with `rpcINVALID_PARAMS` error.
+  - On JSON RPC output (e.g. `subscribe`, `account_tx` etc. methods), `DeliverMax` is present in both API version 1 and version 2.
+  - On JSON RPC output, `Amount` is only present in API version 1 and _not_ in version 2.
+
+#### Modifications to account_info response
+
+- `signer_lists` is returned in the root of the response. (In API version 1, it was nested under `account_data`.) (https://github.com/XRPLF/rippled/pull/3770)
+- When using an invalid `signer_lists` value, the API now returns an "invalidParams" error. (https://github.com/XRPLF/rippled/pull/4585)
+  - (`signer_lists` must be a boolean. In API version 1, strings were accepted and may return a normal response - i.e. as if `signer_lists` were `true`.)
+
+#### Modifications to [account_tx](https://xrpl.org/account_tx.html#account_tx) response
+
+- Using `ledger_index_min`, `ledger_index_max`, and `ledger_index` returns `invalidParams` because if you use `ledger_index_min` or `ledger_index_max`, then it does not make sense to also specify `ledger_index`. In API version 1, no error was returned. (https://github.com/XRPLF/rippled/pull/4571)
+  - The same applies for `ledger_index_min`, `ledger_index_max`, and `ledger_hash`. (https://github.com/XRPLF/rippled/issues/4545#issuecomment-1565065579)
+- Using a `ledger_index_min` or `ledger_index_max` beyond the range of ledgers that the server has:
+  - returns `lgrIdxMalformed` in API version 2. Previously, in API version 1, no error was returned. (https://github.com/XRPLF/rippled/issues/4288)
+- Attempting to use a non-boolean value (such as a string) for the `binary` or `forward` parameters returns `invalidParams` (`rpcINVALID_PARAMS`). Previously, in API version 1, no error was returned. (https://github.com/XRPLF/rippled/pull/4620)
+
+#### Modifications to [noripple_check](https://xrpl.org/noripple_check.html#noripple_check) response
+
+- Attempting to use a non-boolean value (such as a string) for the `transactions` parameter returns `invalidParams` (`rpcINVALID_PARAMS`). Previously, in API version 1, no error was returned. (https://github.com/XRPLF/rippled/pull/4620)
+
+## API Version 1
+
+This version is supported by all `rippled` versions. For WebSocket and HTTP JSON-RPC requests, it is currently the default API version used when no `api_version` is specified.
+
+The [commandline](https://xrpl.org/docs/references/http-websocket-apis/api-conventions/request-formatting/#commandline-format) always uses the latest API version. The command line is intended for ad-hoc usage by humans, not programs or automated scripts. The command line is not meant for use in production code.
+
+### Inconsistency: server_info - network_id
+
+The `network_id` field was added in the `server_info` response in version 1.5.0 (2019), but it is not returned in [reporting mode](https://xrpl.org/rippled-server-modes.html#reporting-mode). However, use of reporting mode is now discouraged, in favor of using [Clio](https://github.com/XRPLF/clio) instead.
+
+## XRP Ledger server version 2.4.0
+
+As of 2025-01-28, version 2.4.0 is in development. You can use a pre-release version by building from source or [using the `nightly` package](https://xrpl.org/docs/infrastructure/installation/install-rippled-on-ubuntu).
+
+### Additions and bugfixes in 2.4.0
+
+- `ledger_entry`: `state` is added an alias for `ripple_state`.
+- `ledger_entry`: Enables case-insensitive filtering by canonical name in addition to case-sensitive filtering by RPC name.
+- `validators`: Added new field `validator_list_threshold` in response.
+- `simulate`: A new RPC that executes a [dry run of a transaction submission](https://github.com/XRPLF/XRPL-Standards/tree/master/XLS-0069d-simulate#2-rpc-simulate)
+- Signing methods autofill fees better and properly handle transactions that don't have a base fee, and will also autofill the `NetworkID` field.
+
+## XRP Ledger server version 2.3.0
+
+[Version 2.3.0](https://github.com/XRPLF/rippled/releases/tag/2.3.0) was released on Nov 25, 2024.
+
+### Breaking changes in 2.3.0
+
+- `book_changes`: If the requested ledger version is not available on this node, a `ledgerNotFound` error is returned and the node does not attempt to acquire the ledger from the p2p network (as with other non-admin RPCs).
+
+Admins can still attempt to retrieve old ledgers with the `ledger_request` RPC.
+
+### Additions and bugfixes in 2.3.0
+
+- `book_changes`: Returns a `validated` field in its response, which was missing in prior versions.
+
+## XRP Ledger server version 2.2.0
+
+[Version 2.2.0](https://github.com/XRPLF/rippled/releases/tag/2.2.0) was released on Jun 5, 2024. The following additions are non-breaking (because they are purely additive):
+
+- The `feature` method now has a non-admin mode for users. (It was previously only available to admin connections.) The method returns an updated list of amendments, including their names and other information. ([#4781](https://github.com/XRPLF/rippled/pull/4781))
+
+## XRP Ledger server version 2.0.0
+
+[Version 2.0.0](https://github.com/XRPLF/rippled/releases/tag/2.0.0) was released on Jan 9, 2024. The following additions are non-breaking (because they are purely additive):
+
+- `server_definitions`: A new RPC that generates a `definitions.json`-like output that can be used in XRPL libraries.
+- In `Payment` transactions, `DeliverMax` has been added. This is a replacement for the `Amount` field, which should not be used. Typically, the `delivered_amount` (in transaction metadata) should be used. To ease the transition, `DeliverMax` is present regardless of API version, since adding a field is non-breaking.
+- API version 2 has been moved from beta to supported, meaning that it is generally available (regardless of the `beta_rpc_api` setting).
+
+## XRP Ledger server version 2.2.0
+
+The following is a non-breaking addition to the API.
+
+- The `feature` method now has a non-admin mode for users. (It was previously only available to admin connections.) The method returns an updated list of amendments, including their names and other information. ([#4781](https://github.com/XRPLF/rippled/pull/4781))
+
+## XRP Ledger server version 1.12.0
+
+[Version 1.12.0](https://github.com/XRPLF/rippled/releases/tag/1.12.0) was released on Sep 6, 2023. The following additions are non-breaking (because they are purely additive).
+
+- `server_info`: Added `ports`, an array which advertises the RPC and WebSocket ports. This information is also included in the `/crawl` endpoint (which calls `server_info` internally). `grpc` and `peer` ports are also included. (https://github.com/XRPLF/rippled/pull/4427)
+  - `ports` contains objects, each containing a `port` for the listening port (a number string), and a `protocol` array listing the supported protocols on that port.
+  - This allows crawlers to build a more detailed topology without needing to port-scan nodes.
+  - (For peers and other non-admin clients, the info about admin ports is excluded.)
+- Clawback: The following additions are gated by the Clawback amendment (`featureClawback`). (https://github.com/XRPLF/rippled/pull/4553)
+  - Adds an [AccountRoot flag](https://xrpl.org/accountroot.html#accountroot-flags) called `lsfAllowTrustLineClawback` (https://github.com/XRPLF/rippled/pull/4617)
+    - Adds the corresponding `asfAllowTrustLineClawback` [AccountSet Flag](https://xrpl.org/accountset.html#accountset-flags) as well.
+    - Clawback is disabled by default, so if an issuer desires the ability to claw back funds, they must use an `AccountSet` transaction to set the AllowTrustLineClawback flag. They must do this before creating any trust lines, offers, escrows, payment channels, or checks.
+  - Adds the [Clawback transaction type](https://github.com/XRPLF/XRPL-Standards/blob/master/XLS-39d-clawback/README.md#331-clawback-transaction), containing these fields:
+    - `Account`: The issuer of the asset being clawed back. Must also be the sender of the transaction.
+    - `Amount`: The amount being clawed back, with the `Amount.issuer` being the token holder's address.
+- Adds [AMM](https://github.com/XRPLF/XRPL-Standards/discussions/78) ([#4294](https://github.com/XRPLF/rippled/pull/4294), [#4626](https://github.com/XRPLF/rippled/pull/4626)) feature:
+  - Adds `amm_info` API to retrieve AMM information for a given tokens pair.
+  - Adds `AMMCreate` transaction type to create `AMM` instance.
+  - Adds `AMMDeposit` transaction type to deposit funds into `AMM` instance.
+  - Adds `AMMWithdraw` transaction type to withdraw funds from `AMM` instance.
+  - Adds `AMMVote` transaction type to vote for the trading fee of `AMM` instance.
+  - Adds `AMMBid` transaction type to bid for the Auction Slot of `AMM` instance.
+  - Adds `AMMDelete` transaction type to delete `AMM` instance.
+  - Adds `sfAMMID` to `AccountRoot` to indicate that the account is `AMM`'s account. `AMMID` is used to fetch `ltAMM`.
+  - Adds `lsfAMMNode` `TrustLine` flag to indicate that one side of the `TrustLine` is `AMM` account.
+  - Adds `tfLPToken`, `tfSingleAsset`, `tfTwoAsset`, `tfOneAssetLPToken`, `tfLimitLPToken`, `tfTwoAssetIfEmpty`,
+    `tfWithdrawAll`, `tfOneAssetWithdrawAll` which allow a trader to specify different fields combination
+    for `AMMDeposit` and `AMMWithdraw` transactions.
+  - Adds new transaction result codes:
+    - tecUNFUNDED_AMM: insufficient balance to fund AMM. The account does not have funds for liquidity provision.
+    - tecAMM_BALANCE: AMM has invalid balance. Calculated balances greater than the current pool balances.
+    - tecAMM_FAILED: AMM transaction failed. Fails due to a processing failure.
+    - tecAMM_INVALID_TOKENS: AMM invalid LP tokens. Invalid input values, format, or calculated values.
+    - tecAMM_EMPTY: AMM is in empty state. Transaction requires AMM in non-empty state (LP tokens > 0).
+    - tecAMM_NOT_EMPTY: AMM is not in empty state. Transaction requires AMM in empty state (LP tokens == 0).
+    - tecAMM_ACCOUNT: AMM account. Clawback of AMM account.
+    - tecINCOMPLETE: Some work was completed, but more submissions required to finish. AMMDelete partially deletes the trustlines.
+
+## XRP Ledger server version 1.11.0
+
+[Version 1.11.0](https://github.com/XRPLF/rippled/releases/tag/1.11.0) was released on Jun 20, 2023.
+
+### Breaking changes in 1.11
+
+- Added the ability to mark amendments as obsolete. For the `feature` admin API, there is a new possible value for the `vetoed` field. (https://github.com/XRPLF/rippled/pull/4291)
+  - The value of `vetoed` can now be `true`, `false`, or `"Obsolete"`.
+- Removed the acceptance of seeds or public keys in place of account addresses. (https://github.com/XRPLF/rippled/pull/4404)
+  - This simplifies the API and encourages better security practices (i.e. seeds should never be sent over the network).
+- For the `ledger_data` method, when all entries are filtered out, the `state` field of the response is now an empty list (in other words, an empty array, `[]`). (Previously, it would return `null`.) While this is technically a breaking change, the new behavior is consistent with the documentation, so this is considered only a bug fix. (https://github.com/XRPLF/rippled/pull/4398)
+- If and when the `fixNFTokenRemint` amendment activates, there will be a new AccountRoot field, `FirstNFTSequence`. This field is set to the current account sequence when the account issues their first NFT. If an account has not issued any NFTs, then the field is not set. ([#4406](https://github.com/XRPLF/rippled/pull/4406))
+  - There is a new account deletion restriction: an account can only be deleted if `FirstNFTSequence` + `MintedNFTokens` + `256` is less than the current ledger sequence.
+  - This is potentially a breaking change if clients have logic for determining whether an account can be deleted.
+- NetworkID
+  - For sidechains and networks with a network ID greater than 1024, there is a new [transaction common field](https://xrpl.org/transaction-common-fields.html), `NetworkID`. (https://github.com/XRPLF/rippled/pull/4370)
+    - This field helps to prevent replay attacks and is now required for chains whose network ID is 1025 or higher.
+    - The field must be omitted for Mainnet, so there is no change for Mainnet users.
+  - There are three new local error codes:
+    - `telNETWORK_ID_MAKES_TX_NON_CANONICAL`: a `NetworkID` is present but the chain's network ID is less than 1025. Remove the field from the transaction, and try again.
+    - `telREQUIRES_NETWORK_ID`: a `NetworkID` is required, but is not present. Add the field to the transaction, and try again.
+    - `telWRONG_NETWORK`: a `NetworkID` is specified, but it is for a different network. Submit the transaction to a different server which is connected to the correct network.
+
+### Additions and bug fixes in 1.11
+
+- Added `nftoken_id`, `nftoken_ids` and `offer_id` meta fields into NFT `tx` and `account_tx` responses. (https://github.com/XRPLF/rippled/pull/4447)
+- Added an `account_flags` object to the `account_info` method response. (https://github.com/XRPLF/rippled/pull/4459)
+- Added `NFTokenPages` to the `account_objects` RPC. (https://github.com/XRPLF/rippled/pull/4352)
+- Fixed: `marker` returned from the `account_lines` command would not work on subsequent commands. (https://github.com/XRPLF/rippled/pull/4361)
+
+## XRP Ledger server version 1.10.0
+
+[Version 1.10.0](https://github.com/XRPLF/rippled/releases/tag/1.10.0)
+was released on Mar 14, 2023.
+
+### Breaking changes in 1.10
+
+- If the `XRPFees` feature is enabled, the `fee_ref` field will be
+  removed from the [ledger subscription stream](https://xrpl.org/subscribe.html#ledger-stream), because it will no longer
+  have any meaning.
+
+# Unit tests for API changes
+
+The following information is useful to developers contributing to this project:
+
+The purpose of unit tests is to catch bugs and prevent regressions. In general, it often makes sense to create a test function when there is a breaking change to the API. For APIs that have changed in a new API version, the tests should be modified so that both the prior version and the new version are properly tested.
+
+To take one example: for `account_info` version 1, WebSocket and JSON-RPC behavior should be tested. The latest API version, i.e. API version 2, should be tested over WebSocket, JSON-RPC, and command line.

BUILD.md

@@ -0,0 +1,617 @@
+| :warning: **WARNING** :warning:
+|---|
+| These instructions assume you have a C++ development environment ready with Git, Python, Conan, CMake, and a C++ compiler. For help setting one up on Linux, macOS, or Windows, [see this guide](./docs/build/environment.md). |
+
+> These instructions also assume a basic familiarity with Conan and CMake.
+> If you are unfamiliar with Conan,
+> you can read our [crash course](./docs/build/conan.md)
+> or the official [Getting Started][3] walkthrough.
+
+## Branches
+
+For a stable release, choose the `master` branch or one of the [tagged
+releases](https://github.com/ripple/rippled/releases).
+
+```
+git checkout master
+```
+
+For the latest release candidate, choose the `release` branch.
+
+```
+git checkout release
+```
+
+For the latest set of untested features, or to contribute, choose the `develop`
+branch.
+
+```
+git checkout develop
+```
+
+## Minimum Requirements
+
+See [System Requirements](https://xrpl.org/system-requirements.html).
+
+Building rippled generally requires git, Python, Conan, CMake, and a C++ compiler. Some guidance on setting up such a [C++ development environment can be found here](./docs/build/environment.md).
+
+- [Python 3.7](https://www.python.org/downloads/)
+- [Conan 1.60](https://conan.io/downloads.html)[^1]
+- [CMake 3.16](https://cmake.org/download/)
+
+[^1]: It is possible to build with Conan 2.x,
+but the instructions are significantly different,
+which is why we are not recommending it yet.
+Notably, the `conan profile update` command is removed in 2.x.
+Profiles must be edited by hand.
+
+`rippled` is written in the C++20 dialect and includes the `<concepts>` header.
+The [minimum compiler versions][2] required are:
+
+| Compiler    | Version |
+|-------------|---------|
+| GCC         | 11      |
+| Clang       | 13      |
+| Apple Clang | 13.1.6  |
+| MSVC        | 19.23   |
+
+### Linux
+
+The Ubuntu operating system has received the highest level of
+quality assurance, testing, and support.
+
+Here are [sample instructions for setting up a C++ development environment on Linux](./docs/build/environment.md#linux).
+
+### Mac
+
+Many rippled engineers use macOS for development.
+
+Here are [sample instructions for setting up a C++ development environment on macOS](./docs/build/environment.md#macos).
+
+### Windows
+
+Windows is not recommended for production use at this time.
+
+- Additionally, 32-bit Windows development is not supported.
+
+[Boost]: https://www.boost.org/
+
+## Steps
+
+### Set Up Conan
+
+After you have a [C++ development environment](./docs/build/environment.md) ready with Git, Python, Conan, CMake, and a C++ compiler, you may need to set up your Conan profile.
+
+These instructions assume a basic familiarity with Conan and CMake.
+
+If you are unfamiliar with Conan, then please read [this crash course](./docs/build/conan.md) or the official [Getting Started][3] walkthrough.
+
+You'll need at least one Conan profile:
+
+   ```
+   conan profile new default --detect
+   ```
+
+Update the compiler settings:
+
+   ```
+   conan profile update settings.compiler.cppstd=20 default
+   ```
+
+Configure Conan (1.x only) to use recipe revisions:
+
+   ```
+   conan config set general.revisions_enabled=1
+   ```
+
+**Linux** developers will commonly have a default Conan [profile][] that compiles
+with GCC and links with libstdc++.
+If you are linking with libstdc++ (see profile setting `compiler.libcxx`),
+then you will need to choose the `libstdc++11` ABI:
+
+   ```
+   conan profile update settings.compiler.libcxx=libstdc++11 default
+   ```
+
+
+Ensure inter-operability between `boost::string_view` and `std::string_view` types:
+
+```
+conan profile update 'conf.tools.build:cxxflags+=["-DBOOST_BEAST_USE_STD_STRING_VIEW"]' default
+conan profile update 'env.CXXFLAGS="-DBOOST_BEAST_USE_STD_STRING_VIEW"' default
+```
+
+If you have other flags in the `conf.tools.build` or `env.CXXFLAGS` sections, make sure to retain the existing flags and append the new ones. You can check them with:
+```
+conan profile show default
+```
+
+
+**Windows** developers may need to use the x64 native build tools.
+An easy way to do that is to run the shortcut "x64 Native Tools Command
+Prompt" for the version of Visual Studio that you have installed.
+
+   Windows developers must also build `rippled` and its dependencies for the x64
+   architecture:
+
+   ```
+   conan profile update settings.arch=x86_64 default
+   ```
+
+### Multiple compilers
+
+When `/usr/bin/g++` exists on a platform, it is the default cpp compiler. This
+default works for some users.
+
+However, if this compiler cannot build rippled or its dependencies, then you can
+install another compiler and set Conan and CMake to use it.
+Update the `conf.tools.build:compiler_executables` setting in order to set the correct variables (`CMAKE_<LANG>_COMPILER`) in the
+generated CMake toolchain file.
+For example, on Ubuntu 20, you may have gcc at `/usr/bin/gcc` and g++ at `/usr/bin/g++`; if that is the case, you can select those compilers with:
+```
+conan profile update 'conf.tools.build:compiler_executables={"c": "/usr/bin/gcc", "cpp": "/usr/bin/g++"}' default
+```
+
+Replace `/usr/bin/gcc` and `/usr/bin/g++` with paths to the desired compilers.
+
+It should choose the compiler for dependencies as well,
+but not all of them have a Conan recipe that respects this setting (yet).
+For the rest, you can set these environment variables.
+Replace `<path>` with paths to the desired compilers:
+
+- `conan profile update env.CC=<path> default`
+- `conan profile update env.CXX=<path> default`
+
+Export our [Conan recipe for Snappy](./external/snappy).
+It does not explicitly link the C++ standard library,
+which allows you to statically link it with GCC, if you want.
+
+   ```
+   # Conan 1.x
+   conan export external/snappy snappy/1.1.10@
+   # Conan 2.x
+   conan export --version 1.1.10 external/snappy
+   ```
+
+Export our [Conan recipe for RocksDB](./external/rocksdb).
+It does not override paths to dependencies when building with Visual Studio.
+
+   ```
+   # Conan 1.x
+   conan export external/rocksdb rocksdb/6.29.5@
+   # Conan 2.x
+   conan export --version 6.29.5 external/rocksdb
+   ```
+
+Export our [Conan recipe for SOCI](./external/soci).
+It patches their CMake to correctly import its dependencies.
+
+   ```
+   # Conan 1.x
+   conan export external/soci soci/4.0.3@
+   # Conan 2.x
+   conan export --version 4.0.3 external/soci
+   ```
+
+Export our [Conan recipe for NuDB](./external/nudb).
+It fixes some source files to add missing `#include`s.
+
+
+   ```
+   # Conan 1.x
+   conan export external/nudb nudb/2.0.8@
+   # Conan 2.x
+   conan export --version 2.0.8 external/nudb
+   ```
+
+### Build and Test
+
+1. Create a build directory and move into it.
+
+   ```
+   mkdir .build
+   cd .build
+   ```
+
+   You can use any directory name. Conan treats your working directory as an
+   install folder and generates files with implementation details.
+   You don't need to worry about these files, but make sure to change
+   your working directory to your build directory before calling Conan.
+
+   **Note:** You can specify a directory for the installation files by adding
+   the `install-folder` or `-if` option to every `conan install` command
+   in the next step.
+
+2. Use conan to generate CMake files for every configuration you want to build:
+
+    ```
+    conan install .. --output-folder . --build missing --settings build_type=Release
+    conan install .. --output-folder . --build missing --settings build_type=Debug
+    ```
+
+    To build Debug, in the next step, be sure to set `-DCMAKE_BUILD_TYPE=Debug`
+
+    For a single-configuration generator, e.g. `Unix Makefiles` or `Ninja`,
+    you only need to run this command once.
+    For a multi-configuration generator, e.g. `Visual Studio`, you may want to
+    run it more than once.
+
+    Each of these commands should also have a different `build_type` setting.
+    A second command with the same `build_type` setting will overwrite the files
+    generated by the first. You can pass the build type on the command line with
+    `--settings build_type=$BUILD_TYPE` or in the profile itself,
+    under the section `[settings]` with the key `build_type`.
+
+    If you are using a Microsoft Visual C++ compiler,
+    then you will need to ensure consistency between the `build_type` setting
+    and the `compiler.runtime` setting.
+
+    When `build_type` is `Release`, `compiler.runtime` should be `MT`.
+
+    When `build_type` is `Debug`, `compiler.runtime` should be `MTd`.
+
+    ```
+    conan install .. --output-folder . --build missing --settings build_type=Release --settings compiler.runtime=MT
+    conan install .. --output-folder . --build missing --settings build_type=Debug --settings compiler.runtime=MTd
+    ```
+
+3. Configure CMake and pass the toolchain file generated by Conan, located at
+   `$OUTPUT_FOLDER/build/generators/conan_toolchain.cmake`.
+
+    Single-config generators:
+
+    Pass the CMake variable [`CMAKE_BUILD_TYPE`][build_type]
+    and make sure it matches the one of the `build_type` settings
+    you chose in the previous step.
+
+    For example, to build Debug, in the next command, replace "Release" with "Debug"
+
+    ```
+    cmake -DCMAKE_TOOLCHAIN_FILE:FILEPATH=build/generators/conan_toolchain.cmake -DCMAKE_BUILD_TYPE=Release -Dxrpld=ON -Dtests=ON ..
+    ```
+
+
+    Multi-config generators:
+
+    ```
+    cmake -DCMAKE_TOOLCHAIN_FILE:FILEPATH=build/generators/conan_toolchain.cmake -Dxrpld=ON -Dtests=ON  ..
+    ```
+
+    **Note:** You can pass build options for `rippled` in this step.
+
+5. Build `rippled`.
+
+   For a single-configuration generator, it will build whatever configuration
+   you passed for `CMAKE_BUILD_TYPE`. For a multi-configuration generator,
+   you must pass the option `--config` to select the build configuration. 
+
+   Single-config generators:
+
+   ```
+   cmake --build .
+   ```
+
+   Multi-config generators:
+
+   ```
+   cmake --build . --config Release
+   cmake --build . --config Debug
+   ```
+
+6. Test rippled.
+
+   Single-config generators:
+
+   ```
+   ./rippled --unittest
+   ```
+
+   Multi-config generators:
+
+   ```
+   ./Release/rippled --unittest
+   ./Debug/rippled --unittest
+   ```
+
+   The location of `rippled` in your build directory depends on your CMake
+   generator. Pass `--help` to see the rest of the command line options.
+
+
+## Coverage report
+
+The coverage report is intended for developers using compilers GCC
+or Clang (including Apple Clang). It is generated by the build target `coverage`,
+which is only enabled when the `coverage` option is set, e.g. with
+`--options coverage=True` in `conan` or `-Dcoverage=ON` variable in `cmake`
+
+Prerequisites for the coverage report:
+
+- [gcovr tool][gcovr] (can be installed e.g. with [pip][python-pip])
+- `gcov` for GCC (installed with the compiler by default) or
+- `llvm-cov` for Clang (installed with the compiler by default)
+- `Debug` build type
+
+A coverage report is created when the following steps are completed, in order:
+
+1. `rippled` binary built with instrumentation data, enabled by the `coverage`
+   option mentioned above
+2. completed run of unit tests, which populates coverage capture data
+3. completed run of the `gcovr` tool (which internally invokes either `gcov` or `llvm-cov`)
+   to assemble both instrumentation data and the coverage capture data into a coverage report
+
+The above steps are automated into a single target `coverage`. The instrumented
+`rippled` binary can also be used for regular development or testing work, at
+the cost of extra disk space utilization and a small performance hit
+(to store coverage capture). In case of a spurious failure of unit tests, it is
+possible to re-run the `coverage` target without rebuilding the `rippled` binary
+(since it is simply a dependency of the coverage report target). It is also possible
+to select only specific tests for the purpose of the coverage report, by setting
+the `coverage_test` variable in `cmake`
+
+The default coverage report format is `html-details`, but the user
+can override it to any of the formats listed in `cmake/CodeCoverage.cmake`
+by setting the `coverage_format` variable in `cmake`. It is also possible
+to generate more than one format at a time by setting the `coverage_extra_args`
+variable in `cmake`. The specific command line used to run the `gcovr` tool will be
+displayed if the `CODE_COVERAGE_VERBOSE` variable is set.
+
+By default, the code coverage tool runs parallel unit tests with `--unittest-jobs`
+ set to the number of available CPU cores. This may cause spurious test
+errors on Apple. Developers can override the number of unit test jobs with
+the `coverage_test_parallelism` variable in `cmake`.
+
+Example use with some cmake variables set:
+
+```
+cd .build
+conan install .. --output-folder . --build missing --settings build_type=Debug
+cmake -DCMAKE_BUILD_TYPE=Debug -Dcoverage=ON -Dxrpld=ON -Dtests=ON -Dcoverage_test_parallelism=2 -Dcoverage_format=html-details -Dcoverage_extra_args="--json coverage.json" -DCMAKE_TOOLCHAIN_FILE:FILEPATH=build/generators/conan_toolchain.cmake ..
+cmake --build . --target coverage
+```
+
+After the `coverage` target is completed, the generated coverage report will be
+stored inside the build directory, as either of:
+
+- file named `coverage.`_extension_ , with a suitable extension for the report format, or
+- directory named `coverage`, with the `index.html` and other files inside, for the `html-details` or `html-nested` report formats.
+
+
+## Options
+
+| Option | Default Value | Description |
+| --- | ---| ---|
+| `assert` | OFF | Enable assertions.
+| `coverage` | OFF | Prepare the coverage report. |
+| `san` | N/A | Enable a sanitizer with Clang. Choices are `thread` and `address`. |
+| `tests` | OFF | Build tests. |
+| `unity` | ON | Configure a unity build. |
+| `xrpld` | OFF | Build the xrpld (`rippled`) application, and not just the libxrpl library. |
+
+[Unity builds][5] may be faster for the first build
+(at the cost of much more memory) since they concatenate sources into fewer
+translation units. Non-unity builds may be faster for incremental builds,
+and can be helpful for detecting `#include` omissions.
+
+
+## Troubleshooting
+
+
+### Conan
+
+If you have trouble building dependencies after changing Conan settings,
+try removing the Conan cache.
+
+```
+rm -rf ~/.conan/data
+```
+
+
+### 'protobuf/port_def.inc' file not found
+
+If `cmake --build .` results in an error due to a missing a protobuf file, then you might have generated CMake files for a different `build_type` than the `CMAKE_BUILD_TYPE` you passed to conan.
+
+```
+/rippled/.build/pb-xrpl.libpb/xrpl/proto/ripple.pb.h:10:10: fatal error: 'google/protobuf/port_def.inc' file not found
+   10 | #include <google/protobuf/port_def.inc>
+      |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+1 error generated.
+```
+
+For example, if you want to build Debug:
+
+1. For conan install, pass `--settings build_type=Debug`
+2. For cmake, pass `-DCMAKE_BUILD_TYPE=Debug`
+
+
+### no std::result_of
+
+If your compiler version is recent enough to have removed `std::result_of` as
+part of C++20, e.g. Apple Clang 15.0, then you might need to add a preprocessor
+definition to your build.
+
+```
+conan profile update 'options.boost:extra_b2_flags="define=BOOST_ASIO_HAS_STD_INVOKE_RESULT"' default
+conan profile update 'env.CFLAGS="-DBOOST_ASIO_HAS_STD_INVOKE_RESULT"' default
+conan profile update 'env.CXXFLAGS="-DBOOST_ASIO_HAS_STD_INVOKE_RESULT"' default
+conan profile update 'conf.tools.build:cflags+=["-DBOOST_ASIO_HAS_STD_INVOKE_RESULT"]' default
+conan profile update 'conf.tools.build:cxxflags+=["-DBOOST_ASIO_HAS_STD_INVOKE_RESULT"]' default
+```
+
+
+### call to 'async_teardown' is ambiguous
+
+If you are compiling with an early version of Clang 16, then you might hit
+a [regression][6] when compiling C++20 that manifests as an [error in a Boost
+header][7]. You can workaround it by adding this preprocessor definition:
+
+```
+conan profile update 'env.CXXFLAGS="-DBOOST_ASIO_DISABLE_CONCEPTS"' default
+conan profile update 'conf.tools.build:cxxflags+=["-DBOOST_ASIO_DISABLE_CONCEPTS"]' default
+```
+
+
+### recompile with -fPIC
+
+If you get a linker error suggesting that you recompile Boost with
+position-independent code, such as:
+
+```
+/usr/bin/ld.gold: error: /home/username/.conan/data/boost/1.77.0/_/_/package/.../lib/libboost_container.a(alloc_lib.o):
+  requires unsupported dynamic reloc 11; recompile with -fPIC
+```
+
+Conan most likely downloaded a bad binary distribution of the dependency.
+This seems to be a [bug][1] in Conan just for Boost 1.77.0 compiled with GCC
+for Linux. The solution is to build the dependency locally by passing
+`--build boost` when calling `conan install`.
+
+```
+/usr/bin/ld.gold: error: /home/username/.conan/data/boost/1.77.0/_/_/package/dc8aedd23a0f0a773a5fcdcfe1ae3e89c4205978/lib/libboost_container.a(alloc_lib.o): requires unsupported dynamic reloc 11; recompile with -fPIC
+```
+
+
+## Add a Dependency
+
+If you want to experiment with a new package, follow these steps:
+
+1. Search for the package on [Conan Center](https://conan.io/center/).
+2. Modify [`conanfile.py`](./conanfile.py):
+    - Add a version of the package to the `requires` property.
+    - Change any default options for the package by adding them to the
+    `default_options` property (with syntax `'$package:$option': $value`).
+3. Modify [`CMakeLists.txt`](./CMakeLists.txt):
+    - Add a call to `find_package($package REQUIRED)`.
+    - Link a library from the package to the target `ripple_libs`
+    (search for the existing call to `target_link_libraries(ripple_libs INTERFACE ...)`).
+4. Start coding! Don't forget to include whatever headers you need from the package.
+
+
+## A crash course in CMake and Conan
+
+To better understand how to use Conan,
+we should first understand _why_ we use Conan,
+and to understand that,
+we need to understand how we use CMake.
+
+
+### CMake
+
+Technically, you don't need CMake to build this project.
+You could manually compile every translation unit into an object file,
+using the right compiler options,
+and then manually link all those objects together,
+using the right linker options.
+However, that is very tedious and error-prone,
+which is why we lean on tools like CMake.
+
+We have written CMake configuration files
+([`CMakeLists.txt`](./CMakeLists.txt) and friends)
+for this project so that CMake can be used to correctly compile and link
+all of the translation units in it.
+Or rather, CMake will generate files for a separate build system
+(e.g. Make, Ninja, Visual Studio, Xcode, etc.)
+that compile and link all of the translation units.
+Even then, CMake has parameters, some of which are platform-specific.
+In CMake's parlance, parameters are specially-named **variables** like
+[`CMAKE_BUILD_TYPE`][build_type] or
+[`CMAKE_MSVC_RUNTIME_LIBRARY`][runtime].
+Parameters include:
+
+- what build system to generate files for
+- where to find the compiler and linker
+- where to find dependencies, e.g. libraries and headers
+- how to link dependencies, e.g. any special compiler or linker flags that
+    need to be used with them, including preprocessor definitions
+- how to compile translation units, e.g. with optimizations, debug symbols,
+    position-independent code, etc.
+- on Windows, which runtime library to link with
+
+For some of these parameters, like the build system and compiler,
+CMake goes through a complicated search process to choose default values.
+For others, like the dependencies,
+_we_ had written in the CMake configuration files of this project
+our own complicated process to choose defaults.
+For most developers, things "just worked"... until they didn't, and then
+you were left trying to debug one of these complicated processes, instead of
+choosing and manually passing the parameter values yourself.
+
+You can pass every parameter to CMake on the command line,
+but writing out these parameters every time we want to configure CMake is
+a pain.
+Most humans prefer to put them into a configuration file, once, that
+CMake can read every time it is configured.
+For CMake, that file is a [toolchain file][toolchain].
+
+
+### Conan
+
+These next few paragraphs on Conan are going to read much like the ones above
+for CMake.
+
+Technically, you don't need Conan to build this project.
+You could manually download, configure, build, and install all of the
+dependencies yourself, and then pass all of the parameters necessary for
+CMake to link to those dependencies.
+To guarantee ABI compatibility, you must be sure to use the same set of
+compiler and linker options for all dependencies _and_ this project.
+However, that is very tedious and error-prone, which is why we lean on tools
+like Conan.
+
+We have written a Conan configuration file ([`conanfile.py`](./conanfile.py))
+so that Conan can be used to correctly download, configure, build, and install
+all of the dependencies for this project,
+using a single set of compiler and linker options for all of them.
+It generates files that contain almost all of the parameters that CMake
+expects.
+Those files include:
+
+- A single toolchain file.
+- For every dependency, a CMake [package configuration file][pcf],
+    [package version file][pvf], and for every build type, a package
+    targets file.
+    Together, these files implement version checking and define `IMPORTED`
+    targets for the dependencies.
+
+The toolchain file itself amends the search path
+([`CMAKE_PREFIX_PATH`][prefix_path]) so that [`find_package()`][find_package]
+will [discover][search] the generated package configuration files.
+
+**Nearly all we must do to properly configure CMake is pass the toolchain
+file.**
+What CMake parameters are left out?
+You'll still need to pick a build system generator,
+and if you choose a single-configuration generator,
+you'll need to pass the `CMAKE_BUILD_TYPE`,
+which should match the `build_type` setting you gave to Conan.
+
+Even then, Conan has parameters, some of which are platform-specific.
+In Conan's parlance, parameters are either settings or options.
+**Settings** are shared by all packages, e.g. the build type.
+**Options** are specific to a given package, e.g. whether to build and link
+OpenSSL as a shared library.
+
+For settings, Conan goes through a complicated search process to choose
+defaults.
+For options, each package recipe defines its own defaults.
+
+You can pass every parameter to Conan on the command line,
+but it is more convenient to put them in a [profile][profile].
+**All we must do to properly configure Conan is edit and pass the profile.**
+
+
+[1]: https://github.com/conan-io/conan-center-index/issues/13168
+[5]: https://en.wikipedia.org/wiki/Unity_build
+[6]: https://github.com/boostorg/beast/issues/2648
+[7]: https://github.com/boostorg/beast/issues/2661
+[gcovr]: https://gcovr.com/en/stable/getting-started.html
+[python-pip]: https://packaging.python.org/en/latest/guides/installing-using-pip-and-virtual-environments/
+[build_type]: https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html
+[runtime]: https://cmake.org/cmake/help/latest/variable/CMAKE_MSVC_RUNTIME_LIBRARY.html
+[toolchain]: https://cmake.org/cmake/help/latest/manual/cmake-toolchains.7.html
+[pcf]: https://cmake.org/cmake/help/latest/manual/cmake-packages.7.html#package-configuration-file
+[pvf]: https://cmake.org/cmake/help/latest/manual/cmake-packages.7.html#package-version-file
+[find_package]: https://cmake.org/cmake/help/latest/command/find_package.html
+[search]: https://cmake.org/cmake/help/latest/command/find_package.html#search-procedure
+[prefix_path]: https://cmake.org/cmake/help/latest/variable/CMAKE_PREFIX_PATH.html
+[profile]: https://docs.conan.io/en/latest/reference/profiles.html
+

Builds/CMake/CMakeFuncs.cmake

@@ -1,207 +0,0 @@
-
-macro(group_sources_in source_dir curdir)
-  file(GLOB children RELATIVE ${source_dir}/${curdir}
-    ${source_dir}/${curdir}/*)
-  foreach (child ${children})
-    if (IS_DIRECTORY ${source_dir}/${curdir}/${child})
-      group_sources_in(${source_dir} ${curdir}/${child})
-    else()
-      string(REPLACE "/" "\\" groupname ${curdir})
-      source_group(${groupname} FILES
-        ${source_dir}/${curdir}/${child})
-    endif()
-  endforeach()
-endmacro()
-
-macro(group_sources curdir)
-  group_sources_in(${PROJECT_SOURCE_DIR} ${curdir})
-endmacro()
-
-macro (exclude_from_default target_)
-  set_target_properties (${target_} PROPERTIES EXCLUDE_FROM_ALL ON)
-  set_target_properties (${target_} PROPERTIES EXCLUDE_FROM_DEFAULT_BUILD ON)
-endmacro ()
-
-macro (exclude_if_included target_)
-  get_directory_property(has_parent PARENT_DIRECTORY)
-  if (has_parent)
-    exclude_from_default (${target_})
-  endif ()
-endmacro ()
-
-function (print_ep_logs _target)
-  ExternalProject_Get_Property (${_target} STAMP_DIR)
-  add_custom_command(TARGET ${_target} POST_BUILD
-    COMMENT "${_target} BUILD OUTPUT"
-    COMMAND ${CMAKE_COMMAND}
-      -DIN_FILE=${STAMP_DIR}/${_target}-build-out.log
-      -P ${CMAKE_CURRENT_SOURCE_DIR}/Builds/CMake/echo_file.cmake
-    COMMAND ${CMAKE_COMMAND}
-      -DIN_FILE=${STAMP_DIR}/${_target}-build-err.log
-      -P ${CMAKE_CURRENT_SOURCE_DIR}/Builds/CMake/echo_file.cmake)
-endfunction ()
-
-#[=========================================================[
-  This is a function override for one function in the
-  standard ExternalProject module. We want to change
-  the generated build script slightly to include printing
-  the build logs in the case of failure. Those modifications
-  have been made here. This function override could break
-  in the future if the ExternalProject module changes internal
-  function names or changes the way it generates the build
-  scripts.
-   See:
-    https://gitlab.kitware.com/cmake/cmake/blob/df1ddeec128d68cc636f2dde6c2acd87af5658b6/Modules/ExternalProject.cmake#L1855-1952
-#]=========================================================]
-
-function(_ep_write_log_script name step cmd_var)
-  ExternalProject_Get_Property(${name} stamp_dir)
-  set(command "${${cmd_var}}")
-
-  set(make "")
-  set(code_cygpath_make "")
-  if(command MATCHES "^\\$\\(MAKE\\)")
-    # GNU make recognizes the string "$(MAKE)" as recursive make, so
-    # ensure that it appears directly in the makefile.
-    string(REGEX REPLACE "^\\$\\(MAKE\\)" "\${make}" command "${command}")
-    set(make "-Dmake=$(MAKE)")
-
-    if(WIN32 AND NOT CYGWIN)
-      set(code_cygpath_make "
-if(\${make} MATCHES \"^/\")
-  execute_process(
-    COMMAND cygpath -w \${make}
-    OUTPUT_VARIABLE cygpath_make
-    ERROR_VARIABLE cygpath_make
-    RESULT_VARIABLE cygpath_error
-    OUTPUT_STRIP_TRAILING_WHITESPACE
-  )
-  if(NOT cygpath_error)
-    set(make \${cygpath_make})
-  endif()
-endif()
-")
-    endif()
-  endif()
-
-  set(config "")
-  if("${CMAKE_CFG_INTDIR}" MATCHES "^\\$")
-    string(REPLACE "${CMAKE_CFG_INTDIR}" "\${config}" command "${command}")
-    set(config "-Dconfig=${CMAKE_CFG_INTDIR}")
-  endif()
-
-  # Wrap multiple 'COMMAND' lines up into a second-level wrapper
-  # script so all output can be sent to one log file.
-  if(command MATCHES "(^|;)COMMAND;")
-    set(code_execute_process "
-${code_cygpath_make}
-execute_process(COMMAND \${command} RESULT_VARIABLE result)
-if(result)
-  set(msg \"Command failed (\${result}):\\n\")
-  foreach(arg IN LISTS command)
-    set(msg \"\${msg} '\${arg}'\")
-  endforeach()
-  message(FATAL_ERROR \"\${msg}\")
-endif()
-")
-    set(code "")
-    set(cmd "")
-    set(sep "")
-    foreach(arg IN LISTS command)
-      if("x${arg}" STREQUAL "xCOMMAND")
-        if(NOT "x${cmd}" STREQUAL "x")
-          string(APPEND code "set(command \"${cmd}\")${code_execute_process}")
-        endif()
-        set(cmd "")
-        set(sep "")
-      else()
-        string(APPEND cmd "${sep}${arg}")
-        set(sep ";")
-      endif()
-    endforeach()
-    string(APPEND code "set(command \"${cmd}\")${code_execute_process}")
-    file(GENERATE OUTPUT "${stamp_dir}/${name}-${step}-$<CONFIG>-impl.cmake" CONTENT "${code}")
-    set(command ${CMAKE_COMMAND} "-Dmake=\${make}" "-Dconfig=\${config}" -P ${stamp_dir}/${name}-${step}-$<CONFIG>-impl.cmake)
-  endif()
-
-  # Wrap the command in a script to log output to files.
-  set(script ${stamp_dir}/${name}-${step}-$<CONFIG>.cmake)
-  set(logbase ${stamp_dir}/${name}-${step})
-  set(code "
-${code_cygpath_make}
-function (_echo_file _fil)
-  file (READ \${_fil} _cont)
-  execute_process (COMMAND \${CMAKE_COMMAND} -E echo \"\${_cont}\")
-endfunction ()
-set(command \"${command}\")
-execute_process(
-  COMMAND \${command}
-  RESULT_VARIABLE result
-  OUTPUT_FILE \"${logbase}-out.log\"
-  ERROR_FILE \"${logbase}-err.log\"
-  )
-if(result)
-  set(msg \"Command failed: \${result}\\n\")
-  foreach(arg IN LISTS command)
-    set(msg \"\${msg} '\${arg}'\")
-  endforeach()
-  execute_process (COMMAND \${CMAKE_COMMAND} -E echo \"Build output for ${logbase} : \")
-  _echo_file (\"${logbase}-out.log\")
-  _echo_file (\"${logbase}-err.log\")
-  set(msg \"\${msg}\\nSee above\\n\")
-  message(FATAL_ERROR \"\${msg}\")
-else()
-  set(msg \"${name} ${step} command succeeded.  See also ${logbase}-*.log\")
-  message(STATUS \"\${msg}\")
-endif()
-")
-  file(GENERATE OUTPUT "${script}" CONTENT "${code}")
-  set(command ${CMAKE_COMMAND} ${make} ${config} -P ${script})
-  set(${cmd_var} "${command}" PARENT_SCOPE)
-endfunction()
-
-find_package(Git)
-
-# function that calls git log to get current hash
-function (git_hash hash_val)
-  # note: optional second extra string argument not in signature
-  if (NOT GIT_FOUND)
-    return ()
-  endif ()
-  set (_hash "")
-  set (_format "%H")
-  if (ARGC GREATER_EQUAL 2)
-    string (TOLOWER ${ARGV1} _short)
-    if (_short STREQUAL "short")
-      set (_format "%h")
-    endif ()
-  endif ()
-  execute_process (COMMAND ${GIT_EXECUTABLE} "log" "--pretty=${_format}" "-n1"
-                   WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
-                   RESULT_VARIABLE _git_exit_code
-                   OUTPUT_VARIABLE _temp_hash
-                   OUTPUT_STRIP_TRAILING_WHITESPACE
-                   ERROR_QUIET)
-  if (_git_exit_code EQUAL 0)
-    set (_hash ${_temp_hash})
-  endif ()
-  set (${hash_val} "${_hash}" PARENT_SCOPE)
-endfunction ()
-
-function (git_branch branch_val)
-  if (NOT GIT_FOUND)
-    return ()
-  endif ()
-  set (_branch "")
-  execute_process (COMMAND ${GIT_EXECUTABLE} "rev-parse" "--abbrev-ref" "HEAD"
-                   WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
-                   RESULT_VARIABLE _git_exit_code
-                   OUTPUT_VARIABLE _temp_branch
-                   OUTPUT_STRIP_TRAILING_WHITESPACE
-                   ERROR_QUIET)
-  if (_git_exit_code EQUAL 0)
-    set (_branch ${_temp_branch})
-  endif ()
-  set (${branch_val} "${_branch}" PARENT_SCOPE)
-endfunction ()
-

Builds/CMake/CMake_sqlite3.txt

@@ -1,60 +0,0 @@
-
-#[=========================================================[
-  SQLITE doesn't provide build files in the
-  standard source-only distribution. So we wrote
-  a simple cmake file and we copy it to the
-  external project folder so that we can use
-  this file to build the lib with ExternalProject
-#]=========================================================]
-
-add_library (sqlite3 STATIC sqlite3.c)
-#[=========================================================[
-   When compiled with SQLITE_THREADSAFE=1, SQLite operates
-   in serialized mode. In this mode, SQLite can be safely
-   used by multiple threads with no restriction.
-
-   NOTE: This implies a global mutex!
-
-   When compiled with SQLITE_THREADSAFE=2, SQLite can be
-   used in a multithreaded program so long as no two
-   threads attempt to use the same database connection at
-   the same time.
-
-   NOTE: This is the preferred threading model, but not
-   currently enabled because we need to investigate our
-   use-model and concurrency requirements.
-
-   TODO: consider whether any other options should be
-   used: https://www.sqlite.org/compile.html
-#]=========================================================]
-
-target_compile_definitions (sqlite3
-  PRIVATE
-    SQLITE_THREADSAFE=1
-    HAVE_USLEEP=1)
-target_compile_options (sqlite3
-  PRIVATE
-    $<$<BOOL:${MSVC}>:
-      -wd4100
-      -wd4127
-      -wd4232
-      -wd4244
-      -wd4701
-      -wd4706
-      -wd4996
-    >
-    $<$<NOT:$<BOOL:${MSVC}>>:-Wno-array-bounds>)
-install (
-  TARGETS
-    sqlite3
-  LIBRARY DESTINATION lib
-  ARCHIVE DESTINATION lib
-  RUNTIME DESTINATION bin
-  INCLUDES DESTINATION include)
-install (
-  FILES
-    sqlite3.h
-    sqlite3ext.h
-  DESTINATION include)
-
-

Builds/CMake/RippledCov.cmake

@@ -1,98 +0,0 @@
-#[===================================================================[
-   coverage report target
-#]===================================================================]
-
-if (coverage)
-  if (is_clang)
-    if (APPLE)
-      execute_process (COMMAND xcrun -f llvm-profdata
-        OUTPUT_VARIABLE LLVM_PROFDATA
-        OUTPUT_STRIP_TRAILING_WHITESPACE)
-    else ()
-      find_program (LLVM_PROFDATA llvm-profdata)
-    endif ()
-    if (NOT LLVM_PROFDATA)
-      message (WARNING "unable to find llvm-profdata - skipping coverage_report target")
-    endif ()
-
-    if (APPLE)
-      execute_process (COMMAND xcrun -f llvm-cov
-        OUTPUT_VARIABLE LLVM_COV
-        OUTPUT_STRIP_TRAILING_WHITESPACE)
-    else ()
-      find_program (LLVM_COV llvm-cov)
-    endif ()
-    if (NOT LLVM_COV)
-      message (WARNING "unable to find llvm-cov - skipping coverage_report target")
-    endif ()
-
-    set (extract_pattern "")
-    if (coverage_core_only)
-      set (extract_pattern "${CMAKE_CURRENT_SOURCE_DIR}/src/ripple/")
-    endif ()
-
-    if (LLVM_COV AND LLVM_PROFDATA)
-      add_custom_target (coverage_report
-        USES_TERMINAL
-        COMMAND ${CMAKE_COMMAND} -E echo "Generating coverage - results will be in ${CMAKE_BINARY_DIR}/coverage/index.html."
-        COMMAND ${CMAKE_COMMAND} -E echo "Running rippled tests."
-        COMMAND rippled --unittest$<$<BOOL:${coverage_test}>:=${coverage_test}> --quiet --unittest-log
-        COMMAND ${LLVM_PROFDATA}
-          merge -sparse default.profraw -o rip.profdata
-        COMMAND ${CMAKE_COMMAND} -E echo "Summary of coverage:"
-        COMMAND ${LLVM_COV}
-          report -instr-profile=rip.profdata
-          $<TARGET_FILE:rippled> ${extract_pattern}
-        # generate html report
-        COMMAND ${LLVM_COV}
-          show -format=html -output-dir=${CMAKE_BINARY_DIR}/coverage
-          -instr-profile=rip.profdata
-          $<TARGET_FILE:rippled> ${extract_pattern}
-        BYPRODUCTS coverage/index.html)
-    endif ()
-  elseif (is_gcc)
-    find_program (LCOV lcov)
-    if (NOT LCOV)
-      message (WARNING "unable to find lcov - skipping coverage_report target")
-    endif ()
-
-    find_program (GENHTML genhtml)
-    if (NOT GENHTML)
-      message (WARNING "unable to find genhtml - skipping coverage_report target")
-    endif ()
-
-    set (extract_pattern "*")
-    if (coverage_core_only)
-      set (extract_pattern "*/src/ripple/*")
-    endif ()
-
-    if (LCOV AND GENHTML)
-      add_custom_target (coverage_report
-        USES_TERMINAL
-        COMMAND ${CMAKE_COMMAND} -E echo "Generating coverage- results will be in ${CMAKE_BINARY_DIR}/coverage/index.html."
-        # create baseline info file
-        COMMAND ${LCOV}
-          --no-external -d "${CMAKE_CURRENT_SOURCE_DIR}" -c -d . -i -o baseline.info
-          | grep -v "ignoring data for external file"
-        # run tests
-        COMMAND ${CMAKE_COMMAND} -E echo "Running rippled tests for coverage report."
-        COMMAND rippled --unittest$<$<BOOL:${coverage_test}>:=${coverage_test}> --quiet --unittest-log
-        # Create test coverage data file
-        COMMAND ${LCOV}
-          --no-external -d "${CMAKE_CURRENT_SOURCE_DIR}" -c -d . -o tests.info
-          | grep -v "ignoring data for external file"
-        # Combine baseline and test coverage data
-        COMMAND ${LCOV}
-          -a baseline.info -a tests.info -o lcov-all.info
-        # extract our files
-        COMMAND ${LCOV}
-          -e lcov-all.info "${extract_pattern}" -o lcov.info
-        COMMAND ${CMAKE_COMMAND} -E echo "Summary of coverage:"
-        COMMAND ${LCOV} --summary lcov.info
-        # generate HTML report
-        COMMAND ${GENHTML}
-          -o ${CMAKE_BINARY_DIR}/coverage lcov.info
-        BYPRODUCTS coverage/index.html)
-    endif ()
-  endif ()
-endif ()

Builds/CMake/RippledMultiConfig.cmake

@@ -1,39 +0,0 @@
-#[===================================================================[
-   multiconfig misc
-#]===================================================================]
-
-if (is_multiconfig)
-  # This code finds all source files in the src subdirectory for inclusion
-  # in the IDE file tree as non-compiled sources. Since this file list will
-  # have some overlap with files we have already added to our targets to
-  # be compiled, we explicitly remove any of these target source files from
-  # this list.
-  file (GLOB_RECURSE all_sources RELATIVE ${CMAKE_CURRENT_SOURCE_DIR}
-    CONFIGURE_DEPENDS
-    src/*.* Builds/*.md docs/*.md src/*.md Builds/*.cmake)
-  file(GLOB md_files RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} CONFIGURE_DEPENDS
-    *.md)
-  LIST(APPEND all_sources ${md_files})
-  foreach (_target secp256k1 ed25519-donna pbufs xrpl_core rippled)
-    get_target_property (_type ${_target} TYPE)
-    if(_type STREQUAL "INTERFACE_LIBRARY")
-      continue()
-    endif()
-    get_target_property (_src ${_target} SOURCES)
-    list (REMOVE_ITEM all_sources ${_src})
-  endforeach ()
-  target_sources (rippled PRIVATE ${all_sources})
-  set_property (
-    SOURCE ${all_sources}
-    APPEND
-    PROPERTY HEADER_FILE_ONLY true)
-  if (MSVC)
-    set_property(
-      DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
-      PROPERTY VS_STARTUP_PROJECT rippled)
-  endif ()
-
-  group_sources(src)
-  group_sources(docs)
-  group_sources(Builds)
-endif ()

Builds/CMake/RippledSettings.cmake

@@ -1,122 +0,0 @@
-#[===================================================================[
-   declare user options/settings
-#]===================================================================]
-
-option (assert "Enables asserts, even in release builds" OFF)
-
-option (reporting "Build rippled with reporting mode enabled" OFF)
-
-option (tests "Build tests" ON)
-
-option (unity "Creates a build using UNITY support in cmake. This is the default" ON)
-if (unity)
-  if (NOT is_ci)
-    set (CMAKE_UNITY_BUILD_BATCH_SIZE 15 CACHE STRING "")
-  endif ()
-endif ()
-if (is_gcc OR is_clang)
-  option (coverage "Generates coverage info." OFF)
-  option (profile "Add profiling flags" OFF)
-  set (coverage_test "" CACHE STRING
-    "On gcc & clang, the specific unit test(s) to run for coverage. Default is all tests.")
-  if (coverage_test AND NOT coverage)
-    set (coverage ON CACHE BOOL "gcc/clang only" FORCE)
-  endif ()
-  option (coverage_core_only
-    "Include only src/ripple files when generating coverage report. \
-    Set to OFF to include all sources in coverage report."
-    ON)
-  option (wextra "compile with extra gcc/clang warnings enabled" ON)
-else ()
-  set (profile OFF CACHE BOOL "gcc/clang only" FORCE)
-  set (coverage OFF CACHE BOOL "gcc/clang only" FORCE)
-  set (wextra OFF CACHE BOOL "gcc/clang only" FORCE)
-endif ()
-if (is_linux)
-  option (BUILD_SHARED_LIBS "build shared ripple libraries" OFF)
-  option (static "link protobuf, openssl, libc++, and boost statically" ON)
-  option (perf "Enables flags that assist with perf recording" OFF)
-  option (use_gold "enables detection of gold (binutils) linker" ON)
-else ()
-  # we are not ready to allow shared-libs on windows because it would require
-  # export declarations. On macos it's more feasible, but static openssl
-  # produces odd linker errors, thus we disable shared lib builds for now.
-  set (BUILD_SHARED_LIBS OFF CACHE BOOL "build shared ripple libraries - OFF for win/macos" FORCE)
-  set (static ON CACHE BOOL "static link, linux only. ON for WIN/macos" FORCE)
-  set (perf OFF CACHE BOOL "perf flags, linux only" FORCE)
-  set (use_gold OFF CACHE BOOL "gold linker, linux only" FORCE)
-endif ()
-if (is_clang)
-  option (use_lld "enables detection of lld linker" ON)
-else ()
-  set (use_lld OFF CACHE BOOL "try lld linker, clang only" FORCE)
-endif ()
-option (jemalloc "Enables jemalloc for heap profiling" OFF)
-option (werr "treat warnings as errors" OFF)
-option (local_protobuf
-  "Force a local build of protobuf instead of looking for an installed version." OFF)
-option (local_grpc
-  "Force a local build of gRPC instead of looking for an installed version." OFF)
-
-# this one is a string and therefore can't be an option
-set (san "" CACHE STRING "On gcc & clang, add sanitizer instrumentation")
-set_property (CACHE san PROPERTY STRINGS ";undefined;memory;address;thread")
-if (san)
-  string (TOLOWER ${san} san)
-  set (SAN_FLAG "-fsanitize=${san}")
-  set (SAN_LIB "")
-  if (is_gcc)
-    if (san STREQUAL "address")
-      set (SAN_LIB "asan")
-    elseif (san STREQUAL "thread")
-      set (SAN_LIB "tsan")
-    elseif (san STREQUAL "memory")
-      set (SAN_LIB "msan")
-    elseif (san STREQUAL "undefined")
-      set (SAN_LIB "ubsan")
-    endif ()
-  endif ()
-  set (_saved_CRL ${CMAKE_REQUIRED_LIBRARIES})
-  set (CMAKE_REQUIRED_LIBRARIES "${SAN_FLAG};${SAN_LIB}")
-  check_cxx_compiler_flag (${SAN_FLAG} COMPILER_SUPPORTS_SAN)
-  set (CMAKE_REQUIRED_LIBRARIES ${_saved_CRL})
-  if (NOT COMPILER_SUPPORTS_SAN)
-    message (FATAL_ERROR "${san} sanitizer does not seem to be supported by your compiler")
-  endif ()
-endif ()
-set (container_label "" CACHE STRING "tag to use for package building containers")
-option (packages_only
-  "ONLY generate package building targets. This is special use-case and almost \
-   certainly not what you want. Use with caution as you won't be able to build \
-   any compiled targets locally." OFF)
-option (have_package_container
-  "Sometimes you already have the tagged container you want to use for package \
-   building and you don't want docker to rebuild it. This flag will detach the \
-   dependency of the package build from the container build. It's an advanced \
-   use case and most likely you should not be touching this flag." OFF)
-
-# the remaining options are obscure and rarely used
-option (beast_no_unit_test_inline
-  "Prevents unit test definitions from being inserted into global table"
-  OFF)
-option (single_io_service_thread
-  "Restricts the number of threads calling io_service::run to one. \
-  This can be useful when debugging."
-  OFF)
-option (boost_show_deprecated
-  "Allow boost to fail on deprecated usage. Only useful if you're trying\
-  to find deprecated calls."
-  OFF)
-option (beast_hashers
-  "Use local implementations for sha/ripemd hashes (experimental, not recommended)"
-  OFF)
-
-if (WIN32)
-  option (beast_disable_autolink "Disables autolinking of system libraries on WIN32" OFF)
-else ()
-  set (beast_disable_autolink OFF CACHE BOOL "WIN32 only" FORCE)
-endif ()
-if (coverage)
-  message (STATUS "coverage build requested - forcing Debug build")
-  set (CMAKE_BUILD_TYPE Debug CACHE STRING "build type" FORCE)
-endif ()

Builds/CMake/RippledVersion.cmake

@@ -1,15 +0,0 @@
-#[===================================================================[
-   read version from source
-#]===================================================================]
-
-file (STRINGS src/ripple/protocol/impl/BuildInfo.cpp BUILD_INFO)
-foreach (line_ ${BUILD_INFO})
-  if (line_ MATCHES "versionString[ ]*=[ ]*\"(.+)\"")
-    set (rippled_version ${CMAKE_MATCH_1})
-  endif ()
-endforeach ()
-if (rippled_version)
-  message (STATUS "rippled version: ${rippled_version}")
-else ()
-  message (FATAL_ERROR "unable to determine rippled version")
-endif ()

Builds/CMake/SociConfig.cmake.patched

@@ -1,106 +0,0 @@
-################################################################################
-# SociConfig.cmake - CMake build configuration of SOCI library
-################################################################################
-# Copyright (C) 2010 Mateusz Loskot <mateusz@loskot.net>
-#
-# Distributed under the Boost Software License, Version 1.0.
-# (See accompanying file LICENSE_1_0.txt or copy at
-# http://www.boost.org/LICENSE_1_0.txt)
-################################################################################
-
-include(CheckCXXSymbolExists)
-
-if(WIN32)
-  check_cxx_symbol_exists("_M_AMD64" "" SOCI_TARGET_ARCH_X64)
-  if(NOT RTC_ARCH_X64)
-    check_cxx_symbol_exists("_M_IX86" "" SOCI_TARGET_ARCH_X86)
-  endif(NOT RTC_ARCH_X64)
-  # add check for arm here
-  # see http://msdn.microsoft.com/en-us/library/b0084kay.aspx
-else(WIN32)
-  check_cxx_symbol_exists("__i386__" "" SOCI_TARGET_ARCH_X86)
-  check_cxx_symbol_exists("__x86_64__" "" SOCI_TARGET_ARCH_X64)
-  check_cxx_symbol_exists("__arm__" "" SOCI_TARGET_ARCH_ARM)
-endif(WIN32)
-
-if(NOT DEFINED LIB_SUFFIX)
-  if(SOCI_TARGET_ARCH_X64)
-    set(_lib_suffix "64")
-  else()
-    set(_lib_suffix "")
-  endif()
-  set(LIB_SUFFIX ${_lib_suffix} CACHE STRING "Specifies suffix for the lib directory")
-endif()
-
-#
-# C++11 Option
-#
-
-if(NOT SOCI_CXX_C11)
-  set (SOCI_CXX_C11 OFF CACHE BOOL "Build to the C++11 standard")
-endif()
-
-#
-# Force compilation flags and set desired warnings level
-#
-
-if (MSVC)
-  add_definitions(-D_CRT_SECURE_NO_DEPRECATE)
-  add_definitions(-D_CRT_SECURE_NO_WARNINGS)
-  add_definitions(-D_CRT_NONSTDC_NO_WARNING)
-  add_definitions(-D_SCL_SECURE_NO_WARNINGS)
-
-  if(CMAKE_CXX_FLAGS MATCHES "/W[0-4]")
-    string(REGEX REPLACE "/W[0-4]" "/W4" CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}")
-  else()
-    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /W4 /we4266")
-  endif()
-
-else()
-
-  set(SOCI_GCC_CLANG_COMMON_FLAGS "")
-    # "-pedantic -Werror -Wno-error=parentheses -Wall -Wextra -Wpointer-arith -Wcast-align -Wcast-qual -Wfloat-equal -Woverloaded-virtual -Wredundant-decls -Wno-long-long")
-
-
-  if (SOCI_CXX_C11)
-    set(SOCI_CXX_VERSION_FLAGS "-std=c++11")
-  else()
-    set(SOCI_CXX_VERSION_FLAGS "-std=gnu++98")
-  endif()
-
-  if("${CMAKE_CXX_COMPILER_ID}" MATCHES "Clang" OR "${CMAKE_CXX_COMPILER}" MATCHES "clang")
-
-    if(NOT CMAKE_CXX_COMPILER_VERSION LESS 3.1 AND SOCI_ASAN)
-      set(SOCI_GCC_CLANG_COMMON_FLAGS "${SOCI_GCC_CLANG_COMMON_FLAGS} -fsanitize=address")
-    endif()
-
-    # enforce C++11 for Clang
-    set(SOCI_CXX_C11 ON)
-    set(SOCI_CXX_VERSION_FLAGS "-std=c++11")
-    add_definitions(-DCATCH_CONFIG_CPP11_NO_IS_ENUM)
-
-    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${SOCI_GCC_CLANG_COMMON_FLAGS} ${SOCI_CXX_VERSION_FLAGS}")
-
-  elseif(CMAKE_COMPILER_IS_GNUCC OR CMAKE_COMPILER_IS_GNUCXX)
-
-    if(NOT CMAKE_CXX_COMPILER_VERSION LESS 4.8 AND SOCI_ASAN)
-      set(SOCI_GCC_CLANG_COMMON_FLAGS "${SOCI_GCC_CLANG_COMMON_FLAGS} -fsanitize=address")
-    endif()
-
-    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${SOCI_GCC_CLANG_COMMON_FLAGS} ${SOCI_CXX_VERSION_FLAGS} ")
-    if (CMAKE_COMPILER_IS_GNUCXX)
-        if (CMAKE_SYSTEM_NAME MATCHES "FreeBSD")
-            set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}")
-        else()
-            set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-variadic-macros")
-        endif()
-    endif()
-
-  else()
-	message(WARNING "Unknown toolset - using default flags to build SOCI")
-  endif()
-
-endif()
-
-# Set SOCI_HAVE_* variables for soci-config.h generator
-set(SOCI_HAVE_CXX_C11 ${SOCI_CXX_C11} CACHE INTERNAL "Enables C++11 support")

Builds/CMake/echo_file.cmake

@@ -1,17 +0,0 @@
-#[=========================================================[
-  This is a CMake script file that is used to write
-  the contents of a file to stdout (using the cmake
-  echo command). The input file is passed via the
-  IN_FILE variable.
-#]=========================================================]
-
-if (EXISTS ${IN_FILE})
-  file (READ ${IN_FILE} contents)
-  ## only print files that actually have some text in them
-  if (contents MATCHES "[a-z0-9A-Z]+")
-    execute_process(
-      COMMAND
-        ${CMAKE_COMMAND} -E echo "${contents}")
-  endif ()
-endif ()
-

Builds/README.md

@@ -1 +0,0 @@
-[Please see the BUILD instructions here](../BUILD.md)

Builds/levelization/levelization.sh

@@ -13,12 +13,15 @@ then
   git clean -ix
 fi
 
+# Ensure all sorting is ASCII-order consistently across platforms.
+export LANG=C
+
 rm -rfv results
 mkdir results
 includes="$( pwd )/results/rawincludes.txt"
 pushd ../..
 echo Raw includes:
-grep -r '#include.*/.*\.h' src/ripple/ src/test/ | \
+grep -r '^[ ]*#include.*/.*\.h' include src | \
     grep -v boost | tee ${includes}
 popd
 pushd results

Builds/levelization/results/loops.txt

@@ -1,54 +1,3 @@
-Loop: ripple.app ripple.core
-  ripple.app > ripple.core
-
-Loop: ripple.app ripple.ledger
-  ripple.app > ripple.ledger
-
-Loop: ripple.app ripple.net
-  ripple.app > ripple.net
-
-Loop: ripple.app ripple.nodestore
-  ripple.app > ripple.nodestore
-
-Loop: ripple.app ripple.overlay
-  ripple.overlay ~= ripple.app
-
-Loop: ripple.app ripple.peerfinder
-  ripple.app > ripple.peerfinder
-
-Loop: ripple.app ripple.protocol
-  ripple.app > ripple.protocol
-
-Loop: ripple.app ripple.rpc
-  ripple.rpc > ripple.app
-
-Loop: ripple.app ripple.shamap
-  ripple.app > ripple.shamap
-
-Loop: ripple.basics ripple.core
-  ripple.core > ripple.basics
-
-Loop: ripple.basics ripple.json
-  ripple.json ~= ripple.basics
-
-Loop: ripple.basics ripple.protocol
-  ripple.protocol > ripple.basics
-
-Loop: ripple.core ripple.net
-  ripple.net > ripple.core
-
-Loop: ripple.ledger ripple.protocol
-  ripple.ledger > ripple.protocol
-
-Loop: ripple.net ripple.rpc
-  ripple.rpc > ripple.net
-
-Loop: ripple.nodestore ripple.overlay
-  ripple.overlay ~= ripple.nodestore
-
-Loop: ripple.overlay ripple.rpc
-  ripple.rpc ~= ripple.overlay
-
 Loop: test.app test.jtx
   test.app > test.jtx
 
@@ -61,3 +10,45 @@ Loop: test.jtx test.toplevel
 Loop: test.jtx test.unit_test
   test.unit_test == test.jtx
 
+Loop: xrpl.protocol xrpld.app
+  xrpld.app > xrpl.protocol
+
+Loop: xrpld.app xrpld.core
+  xrpld.app > xrpld.core
+
+Loop: xrpld.app xrpld.ledger
+  xrpld.app > xrpld.ledger
+
+Loop: xrpld.app xrpld.net
+  xrpld.app > xrpld.net
+
+Loop: xrpld.app xrpld.nodestore
+  xrpld.app > xrpld.nodestore
+
+Loop: xrpld.app xrpld.overlay
+  xrpld.overlay ~= xrpld.app
+
+Loop: xrpld.app xrpld.peerfinder
+  xrpld.app > xrpld.peerfinder
+
+Loop: xrpld.app xrpld.rpc
+  xrpld.rpc > xrpld.app
+
+Loop: xrpld.app xrpld.shamap
+  xrpld.app > xrpld.shamap
+
+Loop: xrpld.core xrpld.net
+  xrpld.net > xrpld.core
+
+Loop: xrpld.core xrpld.perflog
+  xrpld.perflog == xrpld.core
+
+Loop: xrpld.net xrpld.rpc
+  xrpld.rpc > xrpld.net
+
+Loop: xrpld.overlay xrpld.rpc
+  xrpld.rpc ~= xrpld.overlay
+
+Loop: xrpld.perflog xrpld.rpc
+  xrpld.rpc ~= xrpld.perflog
+

Builds/levelization/results/ordering.txt

@@ -1,226 +1,202 @@
-ripple.app > ripple.basics
-ripple.app > ripple.beast
-ripple.app > ripple.conditions
-ripple.app > ripple.consensus
-ripple.app > ripple.crypto
-ripple.app > ripple.json
-ripple.app > ripple.resource
-ripple.app > test.unit_test
-ripple.basics > ripple.beast
-ripple.conditions > ripple.basics
-ripple.conditions > ripple.protocol
-ripple.consensus > ripple.basics
-ripple.consensus > ripple.beast
-ripple.consensus > ripple.json
-ripple.consensus > ripple.protocol
-ripple.core > ripple.beast
-ripple.core > ripple.json
-ripple.core > ripple.protocol
-ripple.crypto > ripple.basics
-ripple.json > ripple.beast
-ripple.ledger > ripple.basics
-ripple.ledger > ripple.beast
-ripple.ledger > ripple.core
-ripple.ledger > ripple.json
-ripple.net > ripple.basics
-ripple.net > ripple.beast
-ripple.net > ripple.json
-ripple.net > ripple.protocol
-ripple.net > ripple.resource
-ripple.nodestore > ripple.basics
-ripple.nodestore > ripple.beast
-ripple.nodestore > ripple.core
-ripple.nodestore > ripple.json
-ripple.nodestore > ripple.protocol
-ripple.nodestore > ripple.unity
-ripple.overlay > ripple.basics
-ripple.overlay > ripple.beast
-ripple.overlay > ripple.core
-ripple.overlay > ripple.json
-ripple.overlay > ripple.peerfinder
-ripple.overlay > ripple.protocol
-ripple.overlay > ripple.resource
-ripple.overlay > ripple.server
-ripple.peerfinder > ripple.basics
-ripple.peerfinder > ripple.beast
-ripple.peerfinder > ripple.core
-ripple.peerfinder > ripple.protocol
-ripple.perflog > ripple.basics
-ripple.perflog > ripple.beast
-ripple.perflog > ripple.core
-ripple.perflog > ripple.json
-ripple.perflog > ripple.nodestore
-ripple.perflog > ripple.protocol
-ripple.perflog > ripple.rpc
-ripple.protocol > ripple.beast
-ripple.protocol > ripple.crypto
-ripple.protocol > ripple.json
-ripple.resource > ripple.basics
-ripple.resource > ripple.beast
-ripple.resource > ripple.json
-ripple.resource > ripple.protocol
-ripple.rpc > ripple.basics
-ripple.rpc > ripple.beast
-ripple.rpc > ripple.core
-ripple.rpc > ripple.crypto
-ripple.rpc > ripple.json
-ripple.rpc > ripple.ledger
-ripple.rpc > ripple.nodestore
-ripple.rpc > ripple.protocol
-ripple.rpc > ripple.resource
-ripple.rpc > ripple.server
-ripple.rpc > ripple.shamap
-ripple.server > ripple.basics
-ripple.server > ripple.beast
-ripple.server > ripple.crypto
-ripple.server > ripple.json
-ripple.server > ripple.protocol
-ripple.shamap > ripple.basics
-ripple.shamap > ripple.beast
-ripple.shamap > ripple.crypto
-ripple.shamap > ripple.nodestore
-ripple.shamap > ripple.protocol
-test.app > ripple.app
-test.app > ripple.basics
-test.app > ripple.beast
-test.app > ripple.core
-test.app > ripple.json
-test.app > ripple.ledger
-test.app > ripple.overlay
-test.app > ripple.protocol
-test.app > ripple.resource
-test.app > ripple.rpc
+libxrpl.basics > xrpl.basics
+libxrpl.crypto > xrpl.basics
+libxrpl.json > xrpl.basics
+libxrpl.json > xrpl.json
+libxrpl.protocol > xrpl.basics
+libxrpl.protocol > xrpl.hook
+libxrpl.protocol > xrpl.json
+libxrpl.protocol > xrpl.protocol
+libxrpl.resource > xrpl.basics
+libxrpl.resource > xrpl.resource
+libxrpl.server > xrpl.basics
+libxrpl.server > xrpl.json
+libxrpl.server > xrpl.protocol
+libxrpl.server > xrpl.server
 test.app > test.toplevel
 test.app > test.unit_test
-test.basics > ripple.basics
-test.basics > ripple.beast
-test.basics > ripple.json
-test.basics > ripple.protocol
-test.basics > ripple.rpc
+test.app > xrpl.basics
+test.app > xrpld.app
+test.app > xrpld.core
+test.app > xrpld.ledger
+test.app > xrpld.nodestore
+test.app > xrpld.overlay
+test.app > xrpld.rpc
+test.app > xrpl.hook
+test.app > xrpl.json
+test.app > xrpl.protocol
+test.app > xrpl.resource
 test.basics > test.jtx
 test.basics > test.unit_test
-test.beast > ripple.basics
-test.beast > ripple.beast
-test.conditions > ripple.basics
-test.conditions > ripple.beast
-test.conditions > ripple.conditions
-test.consensus > ripple.app
-test.consensus > ripple.basics
-test.consensus > ripple.beast
-test.consensus > ripple.consensus
-test.consensus > ripple.core
-test.consensus > ripple.ledger
-test.consensus > ripple.protocol
+test.basics > xrpl.basics
+test.basics > xrpld.perflog
+test.basics > xrpld.rpc
+test.basics > xrpl.json
+test.basics > xrpl.protocol
+test.beast > xrpl.basics
+test.conditions > xrpl.basics
+test.conditions > xrpld.conditions
 test.consensus > test.csf
 test.consensus > test.toplevel
 test.consensus > test.unit_test
-test.core > ripple.basics
-test.core > ripple.beast
-test.core > ripple.core
-test.core > ripple.crypto
-test.core > ripple.json
-test.core > ripple.server
+test.consensus > xrpl.basics
+test.consensus > xrpld.app
+test.consensus > xrpld.consensus
+test.consensus > xrpld.core
+test.consensus > xrpld.ledger
+test.consensus > xrpl.protocol
 test.core > test.jtx
 test.core > test.toplevel
 test.core > test.unit_test
-test.csf > ripple.basics
-test.csf > ripple.beast
-test.csf > ripple.consensus
-test.csf > ripple.json
-test.csf > ripple.protocol
-test.json > ripple.beast
-test.json > ripple.json
+test.core > xrpl.basics
+test.core > xrpld.core
+test.core > xrpld.perflog
+test.core > xrpl.json
+test.core > xrpl.server
+test.csf > xrpl.basics
+test.csf > xrpld.consensus
+test.csf > xrpl.json
+test.csf > xrpl.protocol
 test.json > test.jtx
-test.jtx > ripple.app
-test.jtx > ripple.basics
-test.jtx > ripple.beast
-test.jtx > ripple.consensus
-test.jtx > ripple.core
-test.jtx > ripple.json
-test.jtx > ripple.ledger
-test.jtx > ripple.net
-test.jtx > ripple.protocol
-test.jtx > ripple.server
-test.ledger > ripple.app
-test.ledger > ripple.basics
-test.ledger > ripple.beast
-test.ledger > ripple.core
-test.ledger > ripple.ledger
-test.ledger > ripple.protocol
+test.json > xrpl.json
+test.jtx > xrpl.basics
+test.jtx > xrpld.app
+test.jtx > xrpld.consensus
+test.jtx > xrpld.core
+test.jtx > xrpld.ledger
+test.jtx > xrpld.net
+test.jtx > xrpld.rpc
+test.jtx > xrpl.hook
+test.jtx > xrpl.json
+test.jtx > xrpl.protocol
+test.jtx > xrpl.resource
+test.jtx > xrpl.server
 test.ledger > test.jtx
 test.ledger > test.toplevel
-test.net > ripple.net
-test.net > test.jtx
-test.net > test.toplevel
-test.net > test.unit_test
-test.nodestore > ripple.app
-test.nodestore > ripple.basics
-test.nodestore > ripple.beast
-test.nodestore > ripple.core
-test.nodestore > ripple.nodestore
-test.nodestore > ripple.protocol
-test.nodestore > ripple.unity
+test.ledger > xrpl.basics
+test.ledger > xrpld.app
+test.ledger > xrpld.core
+test.ledger > xrpld.ledger
+test.ledger > xrpl.protocol
 test.nodestore > test.jtx
 test.nodestore > test.toplevel
 test.nodestore > test.unit_test
-test.overlay > ripple.app
-test.overlay > ripple.basics
-test.overlay > ripple.beast
-test.overlay > ripple.core
-test.overlay > ripple.overlay
-test.overlay > ripple.peerfinder
-test.overlay > ripple.protocol
-test.overlay > ripple.shamap
+test.nodestore > xrpl.basics
+test.nodestore > xrpld.core
+test.nodestore > xrpld.nodestore
+test.nodestore > xrpld.unity
 test.overlay > test.jtx
+test.overlay > test.toplevel
 test.overlay > test.unit_test
-test.peerfinder > ripple.basics
-test.peerfinder > ripple.beast
-test.peerfinder > ripple.core
-test.peerfinder > ripple.peerfinder
-test.peerfinder > ripple.protocol
+test.overlay > xrpl.basics
+test.overlay > xrpld.app
+test.overlay > xrpld.overlay
+test.overlay > xrpld.peerfinder
+test.overlay > xrpld.shamap
+test.overlay > xrpl.protocol
 test.peerfinder > test.beast
 test.peerfinder > test.unit_test
-test.protocol > ripple.basics
-test.protocol > ripple.beast
-test.protocol > ripple.crypto
-test.protocol > ripple.json
-test.protocol > ripple.protocol
+test.peerfinder > xrpl.basics
+test.peerfinder > xrpld.core
+test.peerfinder > xrpld.peerfinder
+test.peerfinder > xrpl.protocol
 test.protocol > test.toplevel
-test.resource > ripple.basics
-test.resource > ripple.beast
-test.resource > ripple.resource
+test.protocol > xrpl.basics
+test.protocol > xrpl.json
+test.protocol > xrpl.protocol
 test.resource > test.unit_test
-test.rpc > ripple.app
-test.rpc > ripple.basics
-test.rpc > ripple.beast
-test.rpc > ripple.core
-test.rpc > ripple.json
-test.rpc > ripple.net
-test.rpc > ripple.nodestore
-test.rpc > ripple.overlay
-test.rpc > ripple.protocol
-test.rpc > ripple.resource
-test.rpc > ripple.rpc
+test.resource > xrpl.basics
+test.resource > xrpl.resource
 test.rpc > test.jtx
-test.rpc > test.nodestore
 test.rpc > test.toplevel
-test.server > ripple.app
-test.server > ripple.basics
-test.server > ripple.beast
-test.server > ripple.core
-test.server > ripple.json
-test.server > ripple.rpc
-test.server > ripple.server
+test.rpc > xrpl.basics
+test.rpc > xrpld.app
+test.rpc > xrpld.core
+test.rpc > xrpld.net
+test.rpc > xrpld.overlay
+test.rpc > xrpld.rpc
+test.rpc > xrpl.hook
+test.rpc > xrpl.json
+test.rpc > xrpl.protocol
+test.rpc > xrpl.resource
 test.server > test.jtx
 test.server > test.toplevel
 test.server > test.unit_test
-test.shamap > ripple.basics
-test.shamap > ripple.beast
-test.shamap > ripple.nodestore
-test.shamap > ripple.protocol
-test.shamap > ripple.shamap
+test.server > xrpl.basics
+test.server > xrpld.app
+test.server > xrpld.core
+test.server > xrpld.rpc
+test.server > xrpl.json
+test.server > xrpl.server
 test.shamap > test.unit_test
-test.toplevel > ripple.json
+test.shamap > xrpl.basics
+test.shamap > xrpld.nodestore
+test.shamap > xrpld.shamap
+test.shamap > xrpl.protocol
 test.toplevel > test.csf
-test.unit_test > ripple.basics
-test.unit_test > ripple.beast
+test.toplevel > xrpl.json
+test.unit_test > xrpl.basics
+xrpl.hook > xrpl.basics
+xrpl.json > xrpl.basics
+xrpl.protocol > xrpl.basics
+xrpl.protocol > xrpl.json
+xrpl.resource > xrpl.basics
+xrpl.resource > xrpl.json
+xrpl.resource > xrpl.protocol
+xrpl.server > xrpl.basics
+xrpl.server > xrpl.json
+xrpl.server > xrpl.protocol
+xrpld.app > test.unit_test
+xrpld.app > xrpl.basics
+xrpld.app > xrpld.conditions
+xrpld.app > xrpld.consensus
+xrpld.app > xrpld.perflog
+xrpld.app > xrpl.hook
+xrpld.app > xrpl.json
+xrpld.app > xrpl.resource
+xrpld.conditions > xrpl.basics
+xrpld.conditions > xrpl.protocol
+xrpld.consensus > xrpl.basics
+xrpld.consensus > xrpl.json
+xrpld.consensus > xrpl.protocol
+xrpld.core > xrpl.basics
+xrpld.core > xrpl.json
+xrpld.core > xrpl.protocol
+xrpld.ledger > xrpl.basics
+xrpld.ledger > xrpld.core
+xrpld.ledger > xrpl.json
+xrpld.ledger > xrpl.protocol
+xrpld.net > xrpl.basics
+xrpld.net > xrpl.json
+xrpld.net > xrpl.protocol
+xrpld.net > xrpl.resource
+xrpld.nodestore > xrpl.basics
+xrpld.nodestore > xrpld.core
+xrpld.nodestore > xrpld.unity
+xrpld.nodestore > xrpl.json
+xrpld.nodestore > xrpl.protocol
+xrpld.overlay > xrpl.basics
+xrpld.overlay > xrpld.core
+xrpld.overlay > xrpld.peerfinder
+xrpld.overlay > xrpld.perflog
+xrpld.overlay > xrpl.json
+xrpld.overlay > xrpl.protocol
+xrpld.overlay > xrpl.resource
+xrpld.overlay > xrpl.server
+xrpld.peerfinder > xrpl.basics
+xrpld.peerfinder > xrpld.core
+xrpld.peerfinder > xrpl.protocol
+xrpld.perflog > xrpl.basics
+xrpld.perflog > xrpl.json
+xrpld.perflog > xrpl.protocol
+xrpld.rpc > xrpl.basics
+xrpld.rpc > xrpld.core
+xrpld.rpc > xrpld.ledger
+xrpld.rpc > xrpld.nodestore
+xrpld.rpc > xrpld.shamap
+xrpld.rpc > xrpl.json
+xrpld.rpc > xrpl.protocol
+xrpld.rpc > xrpl.resource
+xrpld.rpc > xrpl.server
+xrpld.shamap > xrpl.basics
+xrpld.shamap > xrpld.nodestore
+xrpld.shamap > xrpl.protocol

CMakeLists.txt

@@ -1,42 +1,72 @@
 cmake_minimum_required (VERSION 3.16)
-
-if (POLICY CMP0074)
-  cmake_policy(SET CMP0074 NEW)
-endif ()
-
-project (rippled)
 set(CMAKE_CXX_EXTENSIONS OFF)
 set(CMAKE_CXX_STANDARD 20)
 set(CMAKE_CXX_STANDARD_REQUIRED ON)
 
+if(POLICY CMP0074)
+  cmake_policy(SET CMP0074 NEW)
+endif()
+if(POLICY CMP0077)
+  cmake_policy(SET CMP0077 NEW)
+endif()
+
+# Fix "unrecognized escape" issues when passing CMAKE_MODULE_PATH on Windows.
+file(TO_CMAKE_PATH "${CMAKE_MODULE_PATH}" CMAKE_MODULE_PATH)
+list(APPEND CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/cmake")
+
+if(POLICY CMP0144)
+  cmake_policy(SET CMP0144 NEW)
+endif()
+
+project (xrpl)
 set(Boost_NO_BOOST_CMAKE ON)
 
 # make GIT_COMMIT_HASH define available to all sources
 find_package(Git)
 if(Git_FOUND)
-    execute_process(COMMAND ${GIT_EXECUTABLE} describe --always --abbrev=40
+    execute_process(COMMAND ${GIT_EXECUTABLE} --git-dir=${CMAKE_CURRENT_SOURCE_DIR}/.git rev-parse HEAD
         OUTPUT_STRIP_TRAILING_WHITESPACE OUTPUT_VARIABLE gch)
     if(gch)
         set(GIT_COMMIT_HASH "${gch}")
         message(STATUS gch: ${GIT_COMMIT_HASH})
         add_definitions(-DGIT_COMMIT_HASH="${GIT_COMMIT_HASH}")
     endif()
+
+    execute_process(COMMAND ${GIT_EXECUTABLE} --git-dir=${CMAKE_CURRENT_SOURCE_DIR}/.git rev-parse --abbrev-ref HEAD
+        OUTPUT_STRIP_TRAILING_WHITESPACE OUTPUT_VARIABLE gb)
+    if(gb)
+        set(GIT_BRANCH "${gb}")
+        message(STATUS gb: ${GIT_BRANCH})
+        add_definitions(-DGIT_BRANCH="${GIT_BRANCH}")
+    endif()
 endif() #git
 
-if (thread_safety_analysis)
+if(thread_safety_analysis)
   add_compile_options(-Wthread-safety -D_LIBCPP_ENABLE_THREAD_SAFETY_ANNOTATIONS -DRIPPLE_ENABLE_THREAD_SAFETY_ANNOTATIONS)
   add_compile_options("-stdlib=libc++")
   add_link_options("-stdlib=libc++")
 endif()
 
-list(APPEND CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/Builds/CMake")
-list(APPEND CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/Builds/CMake/deps")
+option(USE_CONAN "Use Conan package manager for dependencies" OFF)
+# Then, auto-detect if conan_toolchain.cmake is being used
+if(CMAKE_TOOLCHAIN_FILE)
+  # Check if the toolchain file path contains "conan_toolchain"
+  if(CMAKE_TOOLCHAIN_FILE MATCHES "conan_toolchain")
+    set(USE_CONAN ON CACHE BOOL "Using Conan detected from toolchain file" FORCE)
+    message(STATUS "Conan toolchain detected: ${CMAKE_TOOLCHAIN_FILE}")
+    message(STATUS "Building with Conan dependencies")
+  endif()
+endif()
+
+if (NOT USE_CONAN)
+  list(APPEND CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/cmake")
+  list(APPEND CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/cmake/deps")
+endif()
 
 include (CheckCXXCompilerFlag)
 include (FetchContent)
 include (ExternalProject)
 include (CMakeFuncs) # must come *after* ExternalProject b/c it overrides one function in EP
-include (ProcessorCount)
 if (target)
   message (FATAL_ERROR "The target option has been removed - use native cmake options to control build")
 endif ()
@@ -44,7 +74,9 @@ endif ()
 include(RippledSanity)
 include(RippledVersion)
 include(RippledSettings)
-include(RippledNIH)
+if (NOT USE_CONAN)
+  include(RippledNIH)
+endif()
 # this check has to remain in the top-level cmake
 # because of the early return statement
 if (packages_only)
@@ -57,30 +89,91 @@ include(RippledCompiler)
 include(RippledInterface)
 
 ###
+if (NOT USE_CONAN)
+  set(SECP256K1_INSTALL TRUE)
+  add_subdirectory(external/secp256k1)
+  add_library(secp256k1::secp256k1 ALIAS secp256k1)
+  add_subdirectory(external/ed25519-donna)
+  add_subdirectory(external/antithesis-sdk)
+  include(deps/Boost)
+  include(deps/OpenSSL)
+  # include(deps/Secp256k1)
+  # include(deps/Ed25519-donna)
+  include(deps/Lz4)
+  include(deps/Libarchive)
+  include(deps/Sqlite)
+  include(deps/Soci)
+  include(deps/Rocksdb)
+  include(deps/Nudb)
+  include(deps/date)
+  # include(deps/Protobuf)
+  # include(deps/gRPC)
+  include(deps/cassandra)
+  include(deps/Postgres)
+  include(deps/WasmEdge)
+else()
+  include(conan/Boost)
+  find_package(OpenSSL 1.1.1 REQUIRED)
+  set_target_properties(OpenSSL::SSL PROPERTIES
+    INTERFACE_COMPILE_DEFINITIONS OPENSSL_NO_SSL2
+  )
+  set(SECP256K1_INSTALL TRUE)
+  add_subdirectory(external/secp256k1)
+  add_library(secp256k1::secp256k1 ALIAS secp256k1)
+  add_subdirectory(external/ed25519-donna)
+  add_subdirectory(external/antithesis-sdk)
+  find_package(gRPC REQUIRED)
+  find_package(lz4 REQUIRED)
+  # Target names with :: are not allowed in a generator expression.
+  # We need to pull the include directories and imported location properties
+  # from separate targets.
+  find_package(LibArchive REQUIRED)
+  find_package(SOCI REQUIRED)
+  find_package(SQLite3 REQUIRED)
+  find_package(wasmedge REQUIRED)
+  option(rocksdb "Enable RocksDB" ON)
+  if(rocksdb)
+    find_package(RocksDB REQUIRED)
+    set_target_properties(RocksDB::rocksdb PROPERTIES
+      INTERFACE_COMPILE_DEFINITIONS RIPPLE_ROCKSDB_AVAILABLE=1
+    )
+    target_link_libraries(ripple_libs INTERFACE RocksDB::rocksdb)
+  endif()
+  find_package(nudb REQUIRED)
+  find_package(date REQUIRED)
+  find_package(xxHash REQUIRED)
+    if(TARGET nudb::core)
+    set(nudb nudb::core)
+  elseif(TARGET NuDB::nudb)
+    set(nudb NuDB::nudb)
+  else()
+    message(FATAL_ERROR "unknown nudb target")
+  endif()
+  target_link_libraries(ripple_libs INTERFACE ${nudb})
 
-include(deps/Boost)
-include(deps/OpenSSL)
-include(deps/Secp256k1)
-include(deps/Ed25519-donna)
-include(deps/Lz4)
-include(deps/Libarchive)
-include(deps/Sqlite)
-include(deps/Soci)
-include(deps/Snappy)
-include(deps/Rocksdb)
-include(deps/Nudb)
-include(deps/date)
-include(deps/Protobuf)
-include(deps/gRPC)
-include(deps/cassandra)
-include(deps/Postgres)
-include(deps/WasmEdge)
+  target_link_libraries(ripple_libs INTERFACE
+    ed25519::ed25519
+    lz4::lz4
+    OpenSSL::Crypto
+    OpenSSL::SSL
+    # Ripple::grpc_pbufs
+    # Ripple::pbufs
+    secp256k1::secp256k1
+    soci::soci
+    SQLite::SQLite3
+  )
+endif()
 
-###
+if(coverage)
+  include(RippledCov)
+endif()
 
+set(PROJECT_EXPORT_SET RippleExports)
 include(RippledCore)
+if (NOT USE_CONAN)
+  include(deps/Protobuf)
+  include(deps/gRPC)
+endif()
 include(RippledInstall)
-include(RippledCov)
-include(RippledMultiConfig)
 include(RippledDocs)
 include(RippledValidatorKeys)

CONTRIBUTING.md

@@ -57,12 +57,12 @@ Ensure that your code compiles according to the build instructions in the
 [`documentation`](https://docs.xahau.network/infrastructure/building-xahau).
 If you create new source files, they must go under `src/ripple`.
 You will need to add them to one of the
-[source lists](./Builds/CMake/RippledCore.cmake) in CMake.
+[source lists](./cmake/RippledCore.cmake) in CMake.
 
 Please write tests for your code.
 If you create new test source files, they must go under `src/test`.
 You will need to add them to one of the
-[source lists](./Builds/CMake/RippledCore.cmake) in CMake.
+[source lists](./cmake/RippledCore.cmake) in CMake.
 If your test can be run offline, in under 60 seconds, then it can be an
 automatic test run by `rippled --unittest`.
 Otherwise, it must be a manual test.
@@ -71,27 +71,248 @@ The source must be formatted according to the style guide below.
 
 Header includes must be [levelized](./Builds/levelization).
 
+Changes should be usually squashed down into a single commit.
+Some larger or more complicated change sets make more sense,
+and are easier to review if organized into multiple logical commits.
+Either way, all commits should fit the following criteria:
+* Changes should be presented in a single commit or a logical
+  sequence of commits.
+  Specifically, chronological commits that simply
+  reflect the history of how the author implemented
+  the change, "warts and all", are not useful to
+  reviewers.
+* Every commit should have a [good message](#good-commit-messages).
+  to explain a specific aspects of the change.
+* Every commit should be signed.
+* Every commit should be well-formed (builds successfully,
+  unit tests passing), as this helps to resolve merge
+  conflicts, and makes it easier to use `git bisect`
+  to find bugs.
+
+### Good commit messages
+
+Refer to
+["How to Write a Git Commit Message"](https://cbea.ms/git-commit/)
+for general rules on writing a good commit message.
+
+tl;dr
+> 1. Separate subject from body with a blank line.
+> 2. Limit the subject line to 50 characters.
+>    * [...]shoot for 50 characters, but consider 72 the hard limit.
+> 3. Capitalize the subject line.
+> 4. Do not end the subject line with a period.
+> 5. Use the imperative mood in the subject line.
+>    * A properly formed Git commit subject line should always be able
+>      to complete the following sentence: "If applied, this commit will
+>      _your subject line here_".
+> 6. Wrap the body at 72 characters.
+> 7. Use the body to explain what and why vs. how.
+
+In addition to those guidelines, please add one of the following
+prefixes to the subject line if appropriate.
+* `fix:` - The primary purpose is to fix an existing bug.
+* `perf:` - The primary purpose is performance improvements.
+* `refactor:` - The changes refactor code without affecting
+  functionality.
+* `test:` - The changes _only_ affect unit tests.
+* `docs:` - The changes _only_ affect documentation. This can
+  include code comments in addition to `.md` files like this one.
+* `build:` - The changes _only_ affect the build process,
+  including CMake and/or Conan settings.
+* `chore:` - Other tasks that don't affect the binary, but don't fit
+  any of the other cases. e.g. formatting, git settings, updating
+  Github Actions jobs.
+
+Whenever possible, when updating commits after the PR is open, please
+add the PR number to the end of the subject line. e.g. `test: Add
+unit tests for Feature X (#1234)`.
 
 ## Pull requests
 
 In general, pull requests use `develop` as the base branch.
-
 (Hotfixes are an exception.)
 
-Changes to pull requests must be added as new commits.
-Once code reviewers have started looking at your code, please avoid
-force-pushing a branch in a pull request.
+If your changes are not quite ready, but you want to make it easily available
+for preliminary examination or review, you can create a "Draft" pull request.
+While a pull request is marked as a "Draft", you can rebase or reorganize the
+commits in the pull request as desired.
+
+Github pull requests are created as "Ready" by default, or you can mark
+a "Draft" pull request as "Ready".
+Once a pull request is marked as "Ready",
+any changes must be added as new commits. Do not
+force-push to a branch in a pull request under review.
+(This includes rebasing your branch onto the updated base branch.
+Use a merge operation, instead or hit the "Update branch" button
+at the bottom of the Github PR page.)
 This preserves the ability for reviewers to filter changes since their last
 review.
 
-A pull request must obtain **approvals from at least two reviewers** before it
-can be considered for merge by a Maintainer.
+A pull request must obtain **approvals from at least two reviewers**
+before it can be considered for merge by a Maintainer.
 Maintainers retain discretion to require more approvals if they feel the
 credibility of the existing approvals is insufficient.
 
 Pull requests must be merged by [squash-and-merge][2]
 to preserve a linear history for the `develop` branch.
 
+### When and how to merge pull requests
+
+#### "Passed"
+
+A pull request should only have the "Passed" label added when it
+meets a few criteria:
+
+1. It must have two approving reviews [as described
+   above](#pull-requests). (Exception: PRs that are deemed "trivial"
+   only need one approval.)
+2. All CI checks must be complete and passed. (One-off failures may
+   be acceptable if they are related to a known issue.)
+3. The PR must have a [good commit message](#good-commit-messages).
+   * If the PR started with a good commit message, and it doesn't
+     need to be updated, the author can indicate that in a comment.
+   * Any contributor, preferably the author, can leave a comment
+     suggesting a commit message.
+   * If the author squashes and rebases the code in preparation for
+     merge, they should also ensure the commit message(s) are updated
+     as well.
+4. The PR branch must be up to date with the base branch (usually
+   `develop`). This is usually accomplised by merging the base branch
+   into the feature branch, but if the other criteria are met, the
+   changes can be squashed and rebased on top of the base branch.
+5. Finally, and most importantly, the author of the PR must
+   positively indicate that the PR is ready to merge. That can be
+   accomplished by adding the "Passed" label if their role allows,
+   or by leaving a comment to the effect that the PR is ready to
+   merge.
+
+Once the "Passed" label is added, a maintainer may merge the PR at
+any time, so don't use it lightly.
+
+#### Instructions for maintainers
+
+The maintainer should double-check that the PR has met all the
+necessary criteria, and can request additional information from the
+owner, or additional reviews, and can always feel free to remove the
+"Passed" label if appropriate. The maintainer has final say on
+whether a PR gets merged, and are encouraged to communicate and
+issues or concerns to other maintainers.
+
+##### Most pull requests: "Squash and merge"
+
+Most pull requests don't need special handling, and can simply be
+merged using the "Squash and merge" button on the Github UI. Update
+the suggested commit message if necessary.
+
+##### Slightly more complicated pull requests
+
+Some pull requests need to be pushed to `develop` as more than one
+commit. There are multiple ways to accomplish this. If the author
+describes a process, and it is reasonable, follow it. Otherwise, do
+a fast forward only merge (`--ff-only`) on the command line and push.
+
+Either way, check that:
+* The commits are based on the current tip of `develop`.
+* The commits are clean: No merge commits (except when reverse
+  merging), no "[FOLD]" or "fixup!" messages.
+* All commits are signed. If the commits are not signed by the author, use
+  `git commit --amend -S` to sign them yourself.
+* At least one (but preferably all) of the commits has the PR number
+  in the commit message.
+
+**Never use the "Create a merge commit" or "Rebase and merge"
+ functions!**
+
+##### Releases, release candidates, and betas
+
+All releases, including release candidates and betas, are handled
+differently from typical PRs. Most importantly, never use
+the Github UI to merge a release.
+
+1. There are two possible conditions that the `develop` branch will
+   be in when preparing a release.
+   1. Ready or almost ready to go: There may be one or two PRs that
+      need to be merged, but otherwise, the only change needed is to
+      update the version number in `BuildInfo.cpp`. In this case,
+      merge those PRs as appropriate, updating the second one, and
+      waiting for CI to finish in between. Then update
+      `BuildInfo.cpp`.
+   2. Several pending PRs: In this case, do not use the Github UI,
+      because the delays waiting for CI in between each merge will be
+      unnecessarily onerous. Instead, create a working branch (e.g.
+      `develop-next`) based off of `develop`. Squash the changes
+      from each PR onto the branch, one commit each (unless
+      more are needed), being sure to sign each commit and update
+      the commit message to include the PR number. You may be able
+      to use a fast-forward merge for the first PR. The workflow may
+      look something like:
+```
+git fetch upstream
+git checkout upstream/develop
+git checkout -b develop-next
+# Use -S on the ff-only merge if prbranch1 isn't signed.
+# Or do another branch first.
+git merge --ff-only user1/prbranch1
+git merge --squash user2/prbranch2
+git commit -S
+git merge --squash user3/prbranch3
+git commit -S
+[...]
+git push --set-upstream origin develop-next
+</pre>
+```
+2. Create the Pull Request with `release` as the base branch. If any
+   of the included PRs are still open,
+   [use closing keywords](https://docs.github.com/articles/closing-issues-using-keywords)
+   in the description to ensure they are closed when the code is
+   released. e.g. "Closes #1234"
+3. Instead of the default template, reuse and update the message from
+   the previous release. Include the following verbiage somewhere in
+   the description:
+```
+The base branch is release. All releases (including betas) go in
+release. This PR will be merged with --ff-only (not squashed or
+rebased, and not using the GitHub UI) to both release and develop.
+```
+4. Sign-offs for the three platforms usually occur offline, but at
+   least one approval will be needed on the PR.
+5. Once everything is ready to go, open a terminal, and do the
+   fast-forward merges manually. Do not push any branches until you
+   verify that all of them update correctly.
+```
+git fetch upstream
+git checkout -b upstream--develop -t upstream/develop || git checkout upstream--develop
+git reset --hard upstream/develop
+# develop-next must be signed already!
+git merge --ff-only origin/develop-next
+git checkout -b upstream--release -t upstream/release || git checkout upstream--release
+git reset --hard upstream/release
+git merge --ff-only origin/develop-next
+# Only do these 3 steps if pushing a release. No betas or RCs
+git checkout -b upstream--master -t upstream/master || git checkout upstream--master
+git reset --hard upstream/master
+git merge --ff-only origin/develop-next
+# Check that all of the branches are updated
+git log -1 --oneline
+# The output should look like:
+# 02ec8b7962 (HEAD -> upstream--master, origin/develop-next, upstream--release, upstream--develop, develop-next) Set version to 2.2.0-rc1
+# Note that all of the upstream--develop/release/master are on this commit.
+# (Master will be missing for betas, etc.)
+# Just to be safe, do a dry run first:
+git push --dry-run upstream-push HEAD:develop
+git push --dry-run upstream-push HEAD:release
+# git push --dry-run upstream-push HEAD:master
+# Now push
+git push upstream-push HEAD:develop
+git push upstream-push HEAD:release
+# git push upstream-push HEAD:master
+# Don't forget to tag the release, too.
+git tag <version number>
+git push upstream-push <version number>
+```
+6. Finally
+[create a new release on Github](https://github.com/XRPLF/rippled/releases).
+
 
 # Style guide
 
@@ -117,12 +338,103 @@ this:
 You can format individual files in place by running `clang-format -i <file>...`
 from any directory within this project.
 
+There is a Continuous Integration job that runs clang-format on pull requests. If the code doesn't comply, a patch file that corrects auto-fixable formatting issues is generated.
+
+To download the patch file:
+
+1. Next to `clang-format / check (pull_request) Failing after #s` -> click **Details** to open the details page.
+2. Left menu -> click **Summary**
+3. Scroll down to near the bottom-right under `Artifacts` -> click **clang-format.patch**
+4. Download the zip file and extract it to your local git repository. Run `git apply [patch-file-name]`.
+5. Commit and push.
+
 You can install a pre-commit hook to automatically run `clang-format` before every commit:
 ```
 pip3 install pre-commit
 pre-commit install
 ```
 
+## Contracts and instrumentation
+
+We are using [Antithesis](https://antithesis.com/) for continuous fuzzing,
+and keep a copy of [Antithesis C++ SDK](https://github.com/antithesishq/antithesis-sdk-cpp/)
+in `external/antithesis-sdk`. One of the aims of fuzzing is to identify bugs
+by finding external conditions which cause contracts violations inside `rippled`.
+The contracts are expressed as `XRPL_ASSERT` or `UNREACHABLE` (defined in
+`include/xrpl/beast/utility/instrumentation.h`), which are effectively (outside
+of Antithesis) wrappers for `assert(...)` with added name. The purpose of name
+is to provide contracts with stable identity which does not rely on line numbers.
+
+When `rippled` is built with the Antithesis instrumentation enabled
+(using `voidstar` CMake option) and ran on the Antithesis platform, the
+contracts become
+[test properties](https://antithesis.com/docs/using_antithesis/properties.html);
+otherwise they are just like a regular `assert`.
+To learn more about Antithesis, see
+[How Antithesis Works](https://antithesis.com/docs/introduction/how_antithesis_works.html)
+and [C++ SDK](https://antithesis.com/docs/using_antithesis/sdk/cpp/overview.html#)
+
+We continue to use the old style `assert` or `assert(false)` in certain
+locations, where the reporting of contract violations on the Antithesis
+platform is either not possible or not useful.
+
+For this reason:
+* The locations where `assert` or `assert(false)` contracts should continue to be used:
+  * `constexpr` functions
+  * unit tests i.e. files under `src/test`
+  * unit tests-related modules (files under `beast/test` and `beast/unit_test`)
+* Outside of the listed locations, do not use `assert`; use `XRPL_ASSERT` instead,
+  giving it unique name, with the short description of the contract.
+* Outside of the listed locations, do not use `assert(false)`; use
+  `UNREACHABLE` instead, giving it unique name, with the description of the
+  condition being violated
+* The contract name should start with a full name (including scope) of the
+  function, optionally a named lambda, followed by a colon ` : ` and a brief
+  (typically at most five words) description. `UNREACHABLE` contracts
+  can use slightly longer descriptions. If there are multiple overloads of the
+  function, use common sense to balance both brevity and unambiguity of the
+  function name. NOTE: the purpose of name is to provide stable means of
+  unique identification of every contract; for this reason try to avoid elements
+  which can change in some obvious refactors or when reinforcing the condition.
+* Contract description typically (except for `UNREACHABLE`) should describe the
+  _expected_ condition, as in "I assert that _expected_ is true".
+* Contract description for `UNREACHABLE` should describe the _unexpected_
+  situation which caused the line to have been reached.
+* Example good name for an
+  `UNREACHABLE` macro `"Json::operator==(Value, Value) : invalid type"`; example
+  good name for an `XRPL_ASSERT` macro `"Json::Value::asCString : valid type"`.
+* Example **bad** name
+  `"RFC1751::insert(char* s, int x, int start, int length) : length is greater than or equal zero"`
+  (missing namespace, unnecessary full function signature, description too verbose).
+  Good name: `"ripple::RFC1751::insert : minimum length"`.
+* In **few** well-justified cases a non-standard name can be used, in which case a
+  comment should be placed to explain the rationale (example in `contract.cpp`)
+* Do **not** rename a contract without a good reason (e.g. the name no longer
+  reflects the location or the condition being checked)
+* Do not use `std::unreachable`
+* Do not put contracts where they can be violated by an external condition
+  (e.g. timing, data payload before mandatory validation etc.) as this creates
+  bogus bug reports (and causes crashes of Debug builds)
+
+## Unit Tests
+To execute all unit tests:
+
+```rippled --unittest --unittest-jobs=<number of cores>```
+
+(Note: Using multiple cores on a Mac M1 can cause spurious test failures. The 
+cause is still under investigation. If you observe this problem, try specifying fewer jobs.)
+
+To run a specific set of test suites:
+
+```
+rippled --unittest TestSuiteName
+```
+Note: In this example, all tests with prefix `TestSuiteName` will be run, so if
+`TestSuiteName1` and `TestSuiteName2` both exist, then both tests will run. 
+Alternatively, if the unit test name finds an exact match, it will stop 
+doing partial matches, i.e. if a unit test with a title of `TestSuiteName` 
+exists, then no other unit test will be executed, apart from `TestSuiteName`.
+
 ## Avoid
 
 1. Proliferation of nearly identical code.
@@ -182,4 +494,4 @@ existing maintainer without a vote.
 
 
 [1]: https://docs.github.com/en/get-started/quickstart/contributing-to-projects
-[2]: https://docs.github.com/en/pull-requests/collaborating-with-pull-requests/incorporating-changes-from-a-pull-request/about-pull-request-merges#squash-and-merge-your-commits
+[2]: https://docs.github.com/en/pull-requests/collaborating-with-pull-requests/incorporating-changes-from-a-pull-request/about-pull-request-merges#squash-and-merge-your-commits

SECURITY.md

@@ -61,13 +61,12 @@ For these complaints or reports, please [contact our support team](mailto:bugs@x
 
 ### The following type of security problems are excluded
 
-- (D)DOS attacks
-- Error messages or error pages without sensitive data
-- Tests & sample data as publicly available in our repositories at Github
-- Common issues like browser header warnings or DNS configuration, identified by vulnerability scans
-- Vulnerability scan reports for software we publicly use
-- Security issues related to outdated OS's, browsers or plugins
-- Reports for security problems that we have been notified of before
+1. **In scope**. Only bugs in software under the scope of the program qualify. Currently, that means `xahaud` and `xahau-lib`.
+2. **Relevant**. A security issue, posing a danger to user funds, privacy or the operation of the Xahau Ledger.
+3. **Original and previously unknown**. Bugs that are already known and discussed in public do not qualify. Previously reported bugs, even if publicly unknown, are not eligible.
+4. **Specific**. We welcome general security advice or recommendations, but we cannot pay bounties for that.
+5. **Fixable**. There has to be something we can do to permanently fix the problem. Note that bugs in other people’s software may still qualify in some cases. For example, if you find a bug in a library that we use which can compromise the security of software that is in scope and we can get it fixed, you may qualify for a bounty.
+6. **Unused**. If you use the exploit to attack the Xahau Ledger, you do not qualify for a bounty. If you report a vulnerability used in an ongoing or past attack and there is specific, concrete evidence that suggests you are the attacker we reserve the right not to pay a bounty.
 
 Please note: Reports that are lacking any proof (such as screenshots or other data), detailed information or details on how to reproduce any unexpected result will be investigated but will not be eligible for any reward.
 

bin/physical.sh

@@ -0,0 +1,218 @@
+#!/bin/bash
+
+set -o errexit
+
+marker_base=34be0ce4fef20c978df2923c29321ad6cc17facc
+marker_commit=${1:-${marker_base}}
+
+if [ $(git merge-base ${marker_commit} ${marker_base}) != ${marker_base} ]; then
+  echo "first marker commit not an ancestor: ${marker_commit}"
+  exit 1
+fi
+
+if [ $(git merge-base ${marker_commit} HEAD) != $(git rev-parse --verify ${marker_commit}) ]; then
+  echo "given marker commit not an ancestor: ${marker_commit}"
+  exit 1
+fi
+
+if [ -e Builds/CMake ]; then
+  echo move CMake
+  git mv Builds/CMake cmake
+  git add --update .
+  git commit -m 'Move CMake directory' --author 'Pretty Printer <cpp@ripple.com>'
+fi
+
+if [ -e src/ripple ]; then
+
+  echo move protocol buffers
+  mkdir -p include/xrpl
+  if [ -e src/ripple/proto ]; then
+    git mv src/ripple/proto include/xrpl
+  fi
+
+  extract_list() {
+    git show ${marker_commit}:Builds/CMake/RippledCore.cmake | \
+    awk "/END ${1}/ { p = 0 } p && /src\/ripple/; /BEGIN ${1}/ { p = 1 }" | \
+    sed -e 's#src/ripple/##' -e 's#[^a-z]\+$##'
+  }
+
+  move_files() {
+    oldroot="$1"; shift
+    newroot="$1"; shift
+    detail="$1"; shift
+    files=("$@")
+    for file in ${files[@]}; do
+      if [ ! -e ${oldroot}/${file} ]; then
+        continue
+      fi
+      dir=$(dirname ${file})
+      if [ $(basename ${dir}) == 'details' ]; then
+        dir=$(dirname ${dir})
+      fi
+      if [ $(basename ${dir}) == 'impl' ]; then
+        dir="$(dirname ${dir})/${detail}"
+      fi
+      mkdir -p ${newroot}/${dir}
+      git mv ${oldroot}/${file} ${newroot}/${dir}
+    done
+  }
+
+  echo move libxrpl headers
+  files=$(extract_list 'LIBXRPL HEADERS')
+  files+=(
+    basics/SlabAllocator.h
+
+    beast/asio/io_latency_probe.h
+    beast/container/aged_container.h
+    beast/container/aged_container_utility.h
+    beast/container/aged_map.h
+    beast/container/aged_multimap.h
+    beast/container/aged_multiset.h
+    beast/container/aged_set.h
+    beast/container/aged_unordered_map.h
+    beast/container/aged_unordered_multimap.h
+    beast/container/aged_unordered_multiset.h
+    beast/container/aged_unordered_set.h
+    beast/container/detail/aged_associative_container.h
+    beast/container/detail/aged_container_iterator.h
+    beast/container/detail/aged_ordered_container.h
+    beast/container/detail/aged_unordered_container.h
+    beast/container/detail/empty_base_optimization.h
+    beast/core/LockFreeStack.h
+    beast/insight/Collector.h
+    beast/insight/Counter.h
+    beast/insight/CounterImpl.h
+    beast/insight/Event.h
+    beast/insight/EventImpl.h
+    beast/insight/Gauge.h
+    beast/insight/GaugeImpl.h
+    beast/insight/Group.h
+    beast/insight/Groups.h
+    beast/insight/Hook.h
+    beast/insight/HookImpl.h
+    beast/insight/Insight.h
+    beast/insight/Meter.h
+    beast/insight/MeterImpl.h
+    beast/insight/NullCollector.h
+    beast/insight/StatsDCollector.h
+    beast/test/fail_counter.h
+    beast/test/fail_stream.h
+    beast/test/pipe_stream.h
+    beast/test/sig_wait.h
+    beast/test/string_iostream.h
+    beast/test/string_istream.h
+    beast/test/string_ostream.h
+    beast/test/test_allocator.h
+    beast/test/yield_to.h
+    beast/utility/hash_pair.h
+    beast/utility/maybe_const.h
+    beast/utility/temp_dir.h
+
+    # included by only json/impl/json_assert.h
+    json/json_errors.h
+
+    protocol/PayChan.h
+    protocol/RippleLedgerHash.h
+    protocol/messages.h
+    protocol/st.h
+  )
+  files+=(
+    basics/README.md
+    crypto/README.md
+    json/README.md
+    protocol/README.md
+    resource/README.md
+  )
+  move_files src/ripple include/xrpl detail ${files[@]}
+
+  echo move libxrpl sources
+  files=$(extract_list 'LIBXRPL SOURCES')
+  move_files src/ripple src/libxrpl "" ${files[@]}
+
+  echo check leftovers
+  dirs=$(cd include/xrpl; ls -d */)
+  dirs=$(cd src/ripple; ls -d ${dirs} 2>/dev/null || true)
+  files="$(cd src/ripple; find ${dirs} -type f)"
+  if [ -n "${files}" ]; then
+    echo "leftover files:"
+    echo ${files}
+    exit
+  fi
+
+  echo remove empty directories
+  empty_dirs="$(cd src/ripple; find ${dirs} -depth -type d)"
+  for dir in ${empty_dirs[@]}; do
+    if [ -e ${dir} ]; then
+      rmdir ${dir}
+    fi
+  done
+
+  echo move xrpld sources
+  files=$(
+    extract_list 'XRPLD SOURCES'
+    cd src/ripple
+    find * -regex '.*\.\(h\|ipp\|md\|pu\|uml\|png\)'
+  )
+  move_files src/ripple src/xrpld detail ${files[@]}
+
+  files="$(cd src/ripple; find . -type f)"
+  if [ -n "${files}" ]; then
+    echo "leftover files:"
+    echo ${files}
+    exit
+  fi
+
+fi
+
+rm -rf src/ripple
+
+echo rename .hpp to .h
+find include src -name '*.hpp' -exec bash -c 'f="{}"; git mv "${f}" "${f%hpp}h"' \;
+
+echo move PerfLog.h
+if [ -e include/xrpl/basics/PerfLog.h ]; then
+  git mv include/xrpl/basics/PerfLog.h src/xrpld/perflog
+fi
+
+# Make sure all protobuf includes have the correct prefix.
+protobuf_replace='s:^#include\s*["<].*org/xrpl\([^">]\+\)[">]:#include <xrpl/proto/org/xrpl\1>:'
+# Make sure first-party includes use angle brackets and .h extension.
+ripple_replace='s:include\s*["<]ripple/\(.*\)\.h\(pp\)\?[">]:include <ripple/\1.h>:'
+beast_replace='s:include\s*<beast/:include <xrpl/beast/:'
+# Rename impl directories to detail.
+impl_rename='s:\(<xrpl.*\)/impl\(/details\)\?/:\1/detail/:'
+
+echo rewrite includes in libxrpl
+find include/xrpl src/libxrpl -type f -exec sed -i \
+  -e "${protobuf_replace}" \
+  -e "${ripple_replace}" \
+  -e "${beast_replace}" \
+  -e 's:^#include <ripple/:#include <xrpl/:' \
+  -e "${impl_rename}" \
+  {} +
+
+echo rewrite includes in xrpld
+# # https://www.baeldung.com/linux/join-multiple-lines
+libxrpl_dirs="$(cd include/xrpl; ls -d1 */ | sed 's:/$::')"
+# libxrpl_dirs='a\nb\nc\n'
+readarray -t libxrpl_dirs <<< "${libxrpl_dirs}"
+# libxrpl_dirs=(a b c)
+libxrpl_dirs=$(printf -v txt '%s\\|' "${libxrpl_dirs[@]}"; echo "${txt%\\|}")
+# libxrpl_dirs='a\|b\|c'
+find src/xrpld src/test -type f -exec sed -i \
+  -e "${protobuf_replace}" \
+  -e "${ripple_replace}" \
+  -e "${beast_replace}" \
+  -e "s:^#include <ripple/basics/PerfLog.h>:#include <xrpld/perflog/PerfLog.h>:" \
+  -e "s:^#include <ripple/\(${libxrpl_dirs}\)/:#include <xrpl/\1/:" \
+  -e 's:^#include <ripple/:#include <xrpld/:' \
+  -e "${impl_rename}" \
+  {} +
+
+git commit -m 'Rearrange sources' --author 'Pretty Printer <cpp@ripple.com>'
+find include src -type f \( -name '*.cpp' -o -name '*.h' -o -name '*.ipp' \) -exec clang-format-10 -i {} +
+git add --update .
+git commit -m 'Rewrite includes' --author 'Pretty Printer <cpp@ripple.com>'
+./Builds/levelization/levelization.sh
+git add --update .
+git commit -m 'Recompute loops' --author 'Pretty Printer <cpp@ripple.com>'

build-core.sh

@@ -1,4 +1,11 @@
-#!/bin/bash
+#!/bin/bash -u
+# We use set -e and bash with -u to bail on first non zero exit code of any
+# processes launched or upon any unbound variable.
+# We use set -x to print commands before running them to help with
+# debugging.
+set -ex
+
+set -e
 
 echo "START INSIDE CONTAINER - CORE"
 
@@ -20,20 +27,22 @@ if [[ "$?" -ne "0" ]]; then
   exit 127
 fi
 
-perl -i -pe "s/^(\\s*)-DBUILD_SHARED_LIBS=OFF/\\1-DBUILD_SHARED_LIBS=OFF\\n\\1-DROCKSDB_BUILD_SHARED=OFF/g" Builds/CMake/deps/Rocksdb.cmake &&
-mv Builds/CMake/deps/WasmEdge.cmake Builds/CMake/deps/WasmEdge.old &&
+perl -i -pe "s/^(\\s*)-DBUILD_SHARED_LIBS=OFF/\\1-DBUILD_SHARED_LIBS=OFF\\n\\1-DROCKSDB_BUILD_SHARED=OFF/g" cmake/deps/Rocksdb.cmake &&
+mv cmake/deps/WasmEdge.cmake cmake/deps/WasmEdge.old &&
 echo "find_package(LLVM REQUIRED CONFIG)
-message(STATUS \"Found LLVM ${LLVM_PACKAGE_VERSION}\")
+message(STATUS \"Found LLVM \${LLVM_PACKAGE_VERSION}\")
 message(STATUS \"Using LLVMConfig.cmake in: \${LLVM_DIR}\")
 add_library (wasmedge STATIC IMPORTED GLOBAL)
 set_target_properties(wasmedge PROPERTIES IMPORTED_LOCATION \${WasmEdge_LIB})
 target_link_libraries (ripple_libs INTERFACE wasmedge)
-add_library (NIH::WasmEdge ALIAS wasmedge)
+add_library (wasmedge::wasmedge ALIAS wasmedge)
 message(\"WasmEdge DONE\")
-" > Builds/CMake/deps/WasmEdge.cmake &&
-git checkout src/ripple/protocol/impl/BuildInfo.cpp &&
-sed -i s/\"0.0.0\"/\"$(date +%Y).$(date +%-m).$(date +%-d)-$(git rev-parse --abbrev-ref HEAD)+$4\"/g src/ripple/protocol/impl/BuildInfo.cpp &&
+" > cmake/deps/WasmEdge.cmake &&
+git checkout src/libxrpl/protocol/BuildInfo.cpp &&
+sed -i s/\"0.0.0\"/\"$(date +%Y).$(date +%-m).$(date +%-d)-$(git rev-parse --abbrev-ref HEAD)+$4\"/g src/libxrpl/protocol/BuildInfo.cpp &&
 cd release-build &&
+which cmake &&
+cmake --version &&
 cmake .. -DCMAKE_BUILD_TYPE=Release -DBoost_NO_BOOST_CMAKE=ON -DLLVM_DIR=/usr/lib64/llvm13/lib/cmake/llvm/ -DLLVM_LIBRARY_DIR=/usr/lib64/llvm13/lib/ -DWasmEdge_LIB=/usr/local/lib64/libwasmedge.a &&
 make -j$3 VERBOSE=1 &&
 strip -s rippled &&
@@ -61,9 +70,9 @@ fi
 
 cd ..;
 
-mv src/ripple/net/impl/RegisterSSLCerts.cpp.old src/ripple/net/impl/RegisterSSLCerts.cpp;
-mv Builds/CMake/deps/Rocksdb.cmake.old Builds/CMake/deps/Rocksdb.cmake;
-mv Builds/CMake/deps/WasmEdge.old Builds/CMake/deps/WasmEdge.cmake;
+mv src/xrpld/net/detail/RegisterSSLCerts.cpp.old src/xrpld/net/detail/RegisterSSLCerts.cpp;
+mv cmake/deps/Rocksdb.cmake.old cmake/deps/Rocksdb.cmake;
+mv cmake/deps/WasmEdge.old cmake/deps/WasmEdge.cmake;
 
 
 echo "END INSIDE CONTAINER - CORE"

build-full.sh

@@ -1,4 +1,11 @@
-#!/bin/bash
+#!/bin/bash -u
+# We use set -e and bash with -u to bail on first non zero exit code of any
+# processes launched or upon any unbound variable.
+# We use set -x to print commands before running them to help with
+# debugging.
+set -ex
+
+set -e
 
 echo "START INSIDE CONTAINER - FULL"
 
@@ -19,11 +26,11 @@ yum-config-manager --disable centos-sclo-sclo
 ####
 
 cd /io;
-mkdir src/certs;
+mkdir -p src/certs;
 curl --silent -k https://raw.githubusercontent.com/RichardAH/rippled-release-builder/main/ca-bundle/certbundle.h -o src/certs/certbundle.h;
-if [ "`grep certbundle.h src/ripple/net/impl/RegisterSSLCerts.cpp | wc -l`" -eq "0" ]
+if [ "`grep certbundle.h src/xrpld/net/detail/RegisterSSLCerts.cpp | wc -l`" -eq "0" ]
 then
-    cp src/ripple/net/impl/RegisterSSLCerts.cpp src/ripple/net/impl/RegisterSSLCerts.cpp.old
+    cp src/xrpld/net/detail/RegisterSSLCerts.cpp src/xrpld/net/detail/RegisterSSLCerts.cpp.old
     perl -i -pe "s/^{/{
     #ifdef EMBEDDED_CA_BUNDLE
     BIO *cbio = BIO_new_mem_buf(ca_bundle.data(), ca_bundle.size());
@@ -63,11 +70,11 @@ then
             BIO_free(cbio);
         }
     }
-    #endif/g" src/ripple/net/impl/RegisterSSLCerts.cpp &&
-    sed -i "s/#include <ripple\/net\/RegisterSSLCerts.h>/\0\n#include <certs\/certbundle.h>/g" src/ripple/net/impl/RegisterSSLCerts.cpp
+    #endif/g" src/xrpld/net/detail/RegisterSSLCerts.cpp &&
+    sed -i "s/#include <xrpld\/net\/RegisterSSLCerts.h>/\0\n#include <certs\/certbundle.h>/g" src/xrpld/net/detail/RegisterSSLCerts.cpp
 fi
-mkdir .nih_c;
-mkdir .nih_toolchain;
+mkdir -p .nih_c;
+mkdir -p .nih_toolchain;
 cd .nih_toolchain &&
 yum install -y wget lz4 lz4-devel git llvm13-static.x86_64 llvm13-devel.x86_64 devtoolset-10-binutils zlib-static ncurses-static -y \
   devtoolset-7-gcc-c++ \
@@ -86,10 +93,12 @@ tar xzvf zstd-${ZSTD_VERSION}.tar.gz &&
 cd zstd-${ZSTD_VERSION} &&
 make -j$3 install &&
 cd .. &&
-echo "-- Install Cmake 3.23.1 --" &&
+echo "-- Install Cmake 3.25.3 --" &&
 pwd &&
-( wget -nc -q https://github.com/Kitware/CMake/releases/download/v3.23.1/cmake-3.23.1-linux-x86_64.tar.gz; echo "" ) &&
-tar -xzf cmake-3.23.1-linux-x86_64.tar.gz -C /hbb/ &&
+( wget -nc -q https://github.com/Kitware/CMake/releases/download/v3.25.3/cmake-3.25.3-linux-x86_64.tar.gz; echo "" ) &&
+tar -xzf cmake-3.25.3-linux-x86_64.tar.gz -C /hbb/ &&
+ln -sf /hbb/cmake-3.25.3-linux-x86_64/bin/cmake /hbb/bin/cmake &&
+export PATH="/hbb/cmake-3.25.3-linux-x86_64/bin:$PATH" &&
 echo "-- Install Boost 1.86.0 --" &&
 pwd &&
 ( wget -nc -q https://archives.boost.io/release/1.86.0/source/boost_1_86_0.tar.gz; echo "" ) &&
@@ -115,7 +124,7 @@ tar -xf libunwind-13.0.1.src.tar.xz &&
 cp -r libunwind-13.0.1.src/include libunwind-13.0.1.src/src lld-13.0.1.src/ &&
 cd lld-13.0.1.src &&
 rm -rf build CMakeCache.txt &&
-mkdir build &&
+mkdir -p build &&
 cd build &&
 cmake .. -DLLVM_LIBRARY_DIR=/usr/lib64/llvm13/lib/ -DCMAKE_INSTALL_PREFIX=/usr/lib64/llvm13/ -DCMAKE_BUILD_TYPE=Release &&
 make -j$3 install &&
@@ -125,7 +134,7 @@ cd ../../ &&
 echo "-- Build WasmEdge --" &&
 ( wget -nc -q https://github.com/WasmEdge/WasmEdge/archive/refs/tags/0.11.2.zip; unzip -o 0.11.2.zip; ) &&
 cd WasmEdge-0.11.2 &&
-( mkdir build; echo "" ) &&
+( mkdir -p build; echo "" ) &&
 cd build &&
 export BOOST_ROOT="/usr/local/src/boost_1_86_0" &&
 export Boost_LIBRARY_DIRS="/usr/local/lib" &&
@@ -148,7 +157,7 @@ cp -r include/api/wasmedge /usr/include/ &&
 cd /io/ &&
 echo "-- Build Rippled --" &&
 pwd &&
-cp Builds/CMake/deps/Rocksdb.cmake Builds/CMake/deps/Rocksdb.cmake.old &&
+cp cmake/deps/Rocksdb.cmake cmake/deps/Rocksdb.cmake.old &&
 
 echo "MOVING TO [ build-core.sh ]"
 cd /io;

cfg/rippled-example.cfg

@@ -13,7 +13,7 @@
 #
 #   4. HTTPS Client
 #
-#   5. Reporting Mode
+#   5. <vacated>
 #
 #   6. Database
 #
@@ -283,12 +283,14 @@
 #       ssl_cert
 #
 #           Specifies the path to the SSL certificate file in PEM format.
-#           This is not needed if the chain includes it.
+#           This is not needed if the chain includes it. Use ssl_chain if
+#           your certificate includes one or more intermediates.
 #
 #       ssl_chain
 #
 #           If you need a certificate chain, specify the path to the
 #           certificate chain here. The chain may include the end certificate.
+#           This must be used if the certificate includes intermediates.
 #
 #   ssl_ciphers = <cipherlist>
 #
@@ -387,15 +389,32 @@
 #
 #
 #
+# [compression]
+#
+#   true or false
+#
+#   true - enables compression
+#   false - disables compression [default].
+#
+#   The rippled server can save bandwidth by compressing its peer-to-peer communications, 
+#   at a cost of greater CPU usage. If you enable link compression, 
+#   the server automatically compresses communications with peer servers
+#   that also have link compression enabled.
+#   https://xrpl.org/enable-link-compression.html
+#
+#
+#
 # [ips]
 #
 #   List of hostnames or ips where the Ripple protocol is served.  A default
 #   starter list is included in the code and used if no other hostnames are
 #   available.
 #
-#   One address or domain name per line is allowed. A port may must be
-#   specified after adding a space to the address.  The ordering of entries
-#   does not generally matter.
+#   One address or domain name per line is allowed. A port may be specified
+#   after adding a space to the address. If a port is not specified, the default
+#   port of 2459 will be used. Many servers still use the legacy port of 51235.
+#   To connect to such servers, you must specify the port number. The ordering
+#   of entries does not generally matter.
 #
 #   The default list of entries is:
 #     - r.ripple.com 51235
@@ -461,19 +480,6 @@
 #
 #
 #
-# [sntp_servers]
-#
-#   IP address or domain of NTP servers to use for time synchronization.
-#
-#   These NTP servers are suitable for rippled servers located in the United
-#   States:
-#      time.windows.com
-#      time.apple.com
-#      time.nist.gov
-#      pool.ntp.org
-#
-#
-#
 # [max_transactions]
 #
 #   Configure the maximum number of transactions to have in the job queue
@@ -880,119 +886,6 @@
 #
 #-------------------------------------------------------------------------------
 #
-# 5. Reporting Mode
-#
-#------------
-#
-#   rippled has an optional operating mode called Reporting Mode. In Reporting
-#   Mode, rippled does not connect to the peer to peer network. Instead, rippled
-#   will continuously extract data from one or more rippled servers that are
-#   connected to the peer to peer network (referred to as an ETL source).
-#   Reporting mode servers will forward RPC requests that require access to the
-#   peer to peer network (submit, fee, etc) to an ETL source.
-#
-#   [reporting]  Settings for Reporting Mode. If and only if this section is
-#                present, rippled will start in reporting mode. This section
-#                contains a list of ETL source names, and key-value pairs. The
-#                ETL source names each correspond to a configuration file
-#                section; the names must match exactly. The key-value pairs are
-#                optional.
-#
-#
-#   [<name>]
-#
-#   A series of key/value pairs that specify an ETL source.
-#
-#   source_ip = <IP-address>
-#
-#       Required. IP address of the ETL source. Can also be a DNS record.
-#
-#   source_ws_port = <number>
-#
-#       Required. Port on which ETL source is accepting unencrypted websocket
-#       connections.
-#
-#   source_grpc_port = <number>
-#
-#       Required for ETL. Port on which ETL source is accepting gRPC requests.
-#       If this option is ommitted, this ETL source cannot actually be used for
-#       ETL; the Reporting Mode server can still forward RPCs to this ETL
-#       source, but cannot extract data from this ETL source.
-#
-#
-#   Key-value pairs (all optional):
-#
-#       read_only    Valid values: 0, 1. Default is 0. If set to 1, the server
-#                    will start in strict read-only mode, and will not perform
-#                    ETL. The server will still handle RPC requests, and will
-#                    still forward RPC requests that require access to the p2p
-#                    network.
-#
-#      start_sequence
-#                   Sequence of first ledger to extract if the database is empty.
-#                   ETL extracts ledgers in order. If this setting is absent and
-#                   the database is empty, ETL will start with the next ledger
-#                   validated by the network. If this setting is present and the
-#                   database is not empty, an exception is thrown.
-#
-#     num_markers   Degree of parallelism used during the initial ledger
-#                   download. Only used if the database is empty. Valid values
-#                   are 1-256. A higher degree of parallelism results in a
-#                   faster download, but puts more load on the ETL source.
-#                   Default is 2.
-#
-#   Example:
-#
-#     [reporting]
-#     etl_source1
-#     etl_source2
-#     read_only=0
-#     start_sequence=32570
-#     num_markers=8
-#
-#     [etl_source1]
-#     source_ip=1.2.3.4
-#     source_ws_port=6005
-#     source_grpc_port=50051
-#
-#     [etl_source2]
-#     source_ip=5.6.7.8
-#     source_ws_port=6005
-#     source_grpc_port=50051
-#
-#   Minimal Example:
-#
-#     [reporting]
-#     etl_source1
-#
-#     [etl_source1]
-#     source_ip=1.2.3.4
-#     source_ws_port=6005
-#     source_grpc_port=50051
-#
-#
-#   Notes:
-#
-#   Reporting Mode requires Postgres (instead of SQLite). The Postgres
-#   connection info is specified under the [ledger_tx_tables] config section;
-#   see the Database section for further documentation.
-#
-#   Each ETL source specified must have gRPC enabled (by adding a [port_grpc]
-#   section to the config). It is recommended to add a secure_gateway entry to
-#   the gRPC section, in order to bypass the server's rate limiting.
-#   This section needs to be added to the config of the ETL source, not
-#   the config of the reporting node. In the example below, the
-#   reporting server is running at 127.0.0.1. Multiple IPs can be
-#   specified in secure_gateway via a comma separated list.
-#
-#   [port_grpc]
-#   ip = 0.0.0.0
-#   port = 50051
-#   secure_gateway = 127.0.0.1
-#
-#
-#-------------------------------------------------------------------------------
-#
 # 6. Database
 #
 #------------
@@ -1000,13 +893,7 @@
 #   rippled creates 4 SQLite database to hold bookkeeping information
 #   about transactions, local credentials, and various other things.
 #   It also creates the NodeDB, which holds all the objects that
-#   make up the current and historical ledgers. In Reporting Mode, rippled
-#   uses a Postgres database instead of SQLite.
-#
-#   The simplest way to work with Postgres is to install it locally.
-#   When it is running, execute the initdb.sh script in the current
-#   directory as: sudo -u postgres ./initdb.sh
-#   This will create the rippled user and an empty database of the same name.
+#   make up the current and historical ledgers.
 #
 #   The size of the NodeDB grows in proportion to the amount of new data and the
 #   amount of historical data (a configurable setting) so the performance of the
@@ -1048,14 +935,6 @@
 #       keeping full history is not advised, and using online delete is
 #       recommended.
 #
-#   type = Cassandra
-#
-#       Apache Cassandra is an open-source, distributed key-value store - see
-#       https://cassandra.apache.org/ for more details.
-#
-#       Cassandra is an alternative backend to be used only with Reporting Mode.
-#       See the Reporting Mode section for more details about Reporting Mode.
-#
 #   type = RWDB
 #
 #       RWDB is a high-performance memory store written by XRPL-Labs and optimized
@@ -1071,21 +950,6 @@
 #
 #       path                Location to store the database
 #
-#   Required keys for Cassandra:
-#
-#      contact_points       IP of a node in the Cassandra cluster
-#
-#      port                 CQL Native Transport Port
-#
-#      secure_connect_bundle
-#                           Absolute path to a secure connect bundle. When using
-#                           a secure connect bundle, contact_points and port are
-#                           not required.
-#
-#      keyspace             Name of Cassandra keyspace to use
-#
-#      table_name           Name of table in above keyspace to use
-#
 #   Optional keys
 #
 #       cache_size          Size of cache for database records. Default is 16384.
@@ -1102,7 +966,7 @@
 #                           default value for the unspecified parameter.
 #
 #                           Note: the cache will not be created if online_delete
-#                           is specified, or if shards are used.
+#                           is specified.
 #
 #       fast_load           Boolean. If set, load the last persisted ledger
 #                           from disk upon process start before syncing to
@@ -1115,10 +979,6 @@
 #       earliest_seq        The default is 32570 to match the XRP ledger
 #                           network's earliest allowed sequence. Alternate
 #                           networks may set this value. Minimum value of 1.
-#                           If a [shard_db] section is defined, and this
-#                           value is present either [node_db] or [shard_db],
-#                           it must be defined with the same value in both
-#                           sections.
 #
 #       online_delete       Minimum value of 256. Enable automatic purging
 #                           of older ledger information. Maintain at least this
@@ -1166,25 +1026,6 @@
 #                           checking until healthy.
 #                           Default is 5.
 #
-#   Optional keys for Cassandra:
-#
-#       username            Username to use if Cassandra cluster requires
-#                           authentication
-#
-#       password            Password to use if Cassandra cluster requires
-#                           authentication
-#
-#       max_requests_outstanding
-#                           Limits the maximum number of concurrent database
-#                           writes. Default is 10 million. For slower clusters,
-#                           large numbers of concurrent writes can overload the
-#                           cluster. Setting this option can help eliminate
-#                           write timeouts and other write errors due to the
-#                           cluster being overloaded.
-#       io_threads
-#                           Set the number of IO threads used by the
-#                           Cassandra driver. Defaults to 4.
-#
 #   Notes:
 #       The 'node_db' entry configures the primary, persistent storage.
 #
@@ -1201,32 +1042,6 @@
 #   your rippled.cfg file.
 #   Partial pathnames are relative to the location of the rippled executable.
 #
-#   [shard_db]      Settings for the Shard Database (optional)
-#
-#   Format (without spaces):
-#       One or more lines of case-insensitive key / value pairs:
-#       <key> '=' <value>
-#       ...
-#
-#   Example:
-#       path=db/shards/nudb
-#
-#   Required keys:
-#       path                Location to store the database
-#
-#   Optional keys:
-#       max_historical_shards
-#                           The maximum number of historical shards
-#                           to store.
-#
-#   [historical_shard_paths]      Additional storage paths for the Shard Database (optional)
-#
-#   Format (without spaces):
-#       One or more lines, each expressing a full path for storing historical shards:
-#       /mnt/disk1
-#       /mnt/disk2
-#       ...
-#
 #   [sqlite]       Tuning settings for the SQLite databases (optional)
 #
 #   Format (without spaces):
@@ -1306,40 +1121,18 @@
 #                           This setting may not be combined with the
 #                           "safety_level" setting.
 #
-#  [ledger_tx_tables] (optional)
+#       page_size           Valid values: integer (MUST be power of 2 between 512 and 65536)
+#                           The default is 4096 bytes. This setting determines
+#                           the size of a page in the transaction.db file.
+#                           See https://www.sqlite.org/pragma.html#pragma_page_size 
+#                           for more details about the available options.
 #
-#      conninfo             Info for connecting to Postgres. Format is
-#                           postgres://[username]:[password]@[ip]/[database].
-#                           The database and user must already exist. If this
-#                           section is missing and rippled is running in
-#                           Reporting Mode, rippled will connect as the
-#                           user running rippled to a database with the
-#                           same name. On Linux and Mac OS X, the connection
-#                           will take place using the server's UNIX domain
-#                           socket. On Windows, through the localhost IP
-#                           address. Default is empty.
-#
-#      use_tx_tables        Valid values: 1, 0
-#                           The default is 1 (true). Determines whether to use
-#                           the SQLite transaction database. If set to 0,
-#                           rippled will not write to the transaction database,
-#                           and will reject tx, account_tx and tx_history RPCs.
-#                           In Reporting Mode, this setting is ignored.
-#
-#      max_connections      Valid values: any positive integer up to 64 bit
-#                           storage length. This configures the maximum
-#                           number of concurrent connections to postgres.
-#                           Default is the maximum possible value to
-#                           fit in a 64 bit integer.
-#
-#      timeout              Number of seconds after which idle postgres
-#                           connections are discconnected. If set to 0,
-#                           connections never timeout. Default is 600.
-#
-#
-#      remember_ip          Value values: 1, 0
-#                           Default is 1 (true). Whether to cache host and
-#                           port connection settings.
+#       journal_size_limit  Valid values: integer
+#                           The default is 1582080. This setting limits
+#                           the size of the journal for transaction.db file. When the limit is
+#                           reached, older entries will be deleted.
+#                           See https://www.sqlite.org/pragma.html#pragma_journal_size_limit
+#                           for more details about the available options.
 #
 #
 #-------------------------------------------------------------------------------
@@ -1605,6 +1398,12 @@
 #       Admin level API commands over Secure Websockets, when originating
 #       from the same machine (via the loopback adapter at 127.0.0.1).
 #
+#   "grpc"
+#
+#       ETL commands for Clio. We recommend setting secure_gateway
+#       in this section to a comma-separated list of the addresses
+#       of your Clio servers, in order to bypass rippled's rate limiting.
+#
 #   This port is commented out but can be enabled by removing
 #   the '#' from each corresponding line including the entry under [server]
 #
@@ -1638,6 +1437,9 @@ admin = 127.0.0.1
 protocol = http
 
 [port_peer]
+# Many servers still use the legacy port of 51235, so for backward-compatibility
+# we maintain that port number here. However, for new servers we recommend
+# changing this to the default port of 2459.
 port = 51235
 ip = 0.0.0.0
 # alternatively, to accept connections on IPv4 + IPv6, use:
@@ -1649,6 +1451,7 @@ port = 6006
 ip = 127.0.0.1
 admin = 127.0.0.1
 protocol = ws
+send_queue_limit = 500
 
 [port_grpc]
 port = 50051
@@ -1659,6 +1462,7 @@ secure_gateway = 127.0.0.1
 #port = 6005
 #ip = 127.0.0.1
 #protocol = wss
+#send_queue_limit = 500
 
 #-------------------------------------------------------------------------------
 
@@ -1681,45 +1485,15 @@ path=/var/lib/rippled/db/nudb
 online_delete=512
 advisory_delete=0
 
-# This is the persistent datastore for shards. It is important for the health
-# of the ripple network that rippled operators shard as much as practical.
-# NuDB requires SSD storage. Helpful information can be found at
-# https://xrpl.org/history-sharding.html
-#[shard_db]
-#path=/var/lib/rippled/db/shards/nudb
-#max_historical_shards=50
-#
-# This optional section can be configured with a list
-# of paths to use for storing historical shards. Each
-# path must correspond to a unique filesystem.
-#[historical_shard_paths]
-#/path/1
-#/path/2
-
 [database_path]
 /var/lib/rippled/db
 
 
-# To use Postgres, uncomment this section and fill in the appropriate connection
-# info. Postgres can only be used in Reporting Mode.
-# To disable writing to the transaction database, uncomment this section, and
-# set use_tx_tables=0
-# [ledger_tx_tables]
-# conninfo = postgres://[username]:[password]@[ip]/[database]
-# use_tx_tables=1
-
-
 # This needs to be an absolute directory reference, not a relative one.
 # Modify this value as required.
 [debug_logfile]
 /var/log/rippled/debug.log
 
-[sntp_servers]
-time.windows.com
-time.apple.com
-time.nist.gov
-pool.ntp.org
-
 # To use the XRP test network
 # (see https://xrpl.org/connect-your-rippled-to-the-xrp-test-net.html),
 # use the following [ips] section:
@@ -1742,15 +1516,3 @@ validators.txt
 # set to ssl_verify to 0.
 [ssl_verify]
 1
-
-
-# To run in Reporting Mode, uncomment this section and fill in the appropriate
-# connection info for one or more ETL sources.
-# [reporting]
-# etl_source
-#
-#
-# [etl_source]
-# source_grpc_port=50051
-# source_ws_port=6005
-# source_ip=127.0.0.1

cfg/validators-example.txt

@@ -86,3 +86,21 @@ ED2677ABFFD1B33AC6FBC3062B71F1E8397C1505E1C42C64D11AD1B28FF73F4734
 #
 # [import_vl_keys]
 # ED264807102805220DA0F312E71FC2C69E1552C9C5790F6C25E3729DEB573D5860
+
+
+# [validator_list_threshold]
+#
+#   Minimum number of validator lists on which a validator must be listed in
+#   order to be used.
+#
+#   This can be set explicitly to any positive integer number not greater than
+#   the size of [validator_list_keys]. If it is not set, or set to 0, the
+#   value will be calculated at startup from the size of [validator_list_keys],
+#   where the calculation is:
+#
+#     threshold = size(validator_list_keys) < 3
+#       ? 1
+#       : floor(size(validator_list_keys) / 2) + 1
+
+[validator_list_threshold]
+0

cmake/CMakeFuncs.cmake

@@ -0,0 +1,48 @@
+macro(group_sources_in source_dir curdir)
+  file(GLOB children RELATIVE ${source_dir}/${curdir}
+    ${source_dir}/${curdir}/*)
+  foreach (child ${children})
+    if (IS_DIRECTORY ${source_dir}/${curdir}/${child})
+      group_sources_in(${source_dir} ${curdir}/${child})
+    else()
+      string(REPLACE "/" "\\" groupname ${curdir})
+      source_group(${groupname} FILES
+        ${source_dir}/${curdir}/${child})
+    endif()
+  endforeach()
+endmacro()
+
+macro(group_sources curdir)
+  group_sources_in(${PROJECT_SOURCE_DIR} ${curdir})
+endmacro()
+
+macro (exclude_from_default target_)
+  set_target_properties (${target_} PROPERTIES EXCLUDE_FROM_ALL ON)
+  set_target_properties (${target_} PROPERTIES EXCLUDE_FROM_DEFAULT_BUILD ON)
+endmacro ()
+
+macro (exclude_if_included target_)
+  get_directory_property(has_parent PARENT_DIRECTORY)
+  if (has_parent)
+    exclude_from_default (${target_})
+  endif ()
+endmacro ()
+
+find_package(Git)
+
+function (git_branch branch_val)
+  if (NOT GIT_FOUND)
+    return ()
+  endif ()
+  set (_branch "")
+  execute_process (COMMAND ${GIT_EXECUTABLE} "rev-parse" "--abbrev-ref" "HEAD"
+                   WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
+                   RESULT_VARIABLE _git_exit_code
+                   OUTPUT_VARIABLE _temp_branch
+                   OUTPUT_STRIP_TRAILING_WHITESPACE
+                   ERROR_QUIET)
+  if (_git_exit_code EQUAL 0)
+    set (_branch ${_temp_branch})
+  endif ()
+  set (${branch_val} "${_branch}" PARENT_SCOPE)
+endfunction ()

cmake/CodeCoverage.cmake

@@ -0,0 +1,440 @@
+# Copyright (c) 2012 - 2017, Lars Bilke
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without modification,
+# are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice, this
+#    list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. Neither the name of the copyright holder nor the names of its contributors
+#    may be used to endorse or promote products derived from this software without
+#    specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# CHANGES:
+#
+# 2012-01-31, Lars Bilke
+# - Enable Code Coverage
+#
+# 2013-09-17, Joakim Söderberg
+# - Added support for Clang.
+# - Some additional usage instructions.
+#
+# 2016-02-03, Lars Bilke
+# - Refactored functions to use named parameters
+#
+# 2017-06-02, Lars Bilke
+# - Merged with modified version from github.com/ufz/ogs
+#
+# 2019-05-06, Anatolii Kurotych
+# - Remove unnecessary --coverage flag
+#
+# 2019-12-13, FeRD (Frank Dana)
+# - Deprecate COVERAGE_LCOVR_EXCLUDES and COVERAGE_GCOVR_EXCLUDES lists in favor
+#   of tool-agnostic COVERAGE_EXCLUDES variable, or EXCLUDE setup arguments.
+# - CMake 3.4+: All excludes can be specified relative to BASE_DIRECTORY
+# - All setup functions: accept BASE_DIRECTORY, EXCLUDE list
+# - Set lcov basedir with -b argument
+# - Add automatic --demangle-cpp in lcovr, if 'c++filt' is available (can be
+#   overridden with NO_DEMANGLE option in setup_target_for_coverage_lcovr().)
+# - Delete output dir, .info file on 'make clean'
+# - Remove Python detection, since version mismatches will break gcovr
+# - Minor cleanup (lowercase function names, update examples...)
+#
+# 2019-12-19, FeRD (Frank Dana)
+# - Rename Lcov outputs, make filtered file canonical, fix cleanup for targets
+#
+# 2020-01-19, Bob Apthorpe
+# - Added gfortran support
+#
+# 2020-02-17, FeRD (Frank Dana)
+# - Make all add_custom_target()s VERBATIM to auto-escape wildcard characters
+#   in EXCLUDEs, and remove manual escaping from gcovr targets
+#
+# 2021-01-19, Robin Mueller
+# - Add CODE_COVERAGE_VERBOSE option which will allow to print out commands which are run
+# - Added the option for users to set the GCOVR_ADDITIONAL_ARGS variable to supply additional
+#   flags to the gcovr command
+#
+# 2020-05-04, Mihchael Davis
+#     - Add -fprofile-abs-path to make gcno files contain absolute paths
+#     - Fix BASE_DIRECTORY not working when defined
+#     - Change BYPRODUCT from folder to index.html to stop ninja from complaining about double defines
+#
+# 2021-05-10, Martin Stump
+#     - Check if the generator is multi-config before warning about non-Debug builds
+#
+# 2022-02-22, Marko Wehle
+#     - Change gcovr output from -o <filename> for --xml <filename> and --html <filename> output respectively.
+#       This will allow for Multiple Output Formats at the same time by making use of GCOVR_ADDITIONAL_ARGS, e.g. GCOVR_ADDITIONAL_ARGS "--txt".
+#
+# 2022-09-28, Sebastian Mueller
+#     - fix append_coverage_compiler_flags_to_target to correctly add flags
+#     - replace "-fprofile-arcs -ftest-coverage" with "--coverage" (equivalent)
+#
+# 2024-01-04, Bronek Kozicki
+#     - remove setup_target_for_coverage_lcov (slow) and setup_target_for_coverage_fastcov (no support for Clang)
+#     - fix Clang support by adding find_program( ... llvm-cov )
+#     - add Apple Clang support by adding execute_process( COMMAND xcrun -f llvm-cov ... )
+#     - add CODE_COVERAGE_GCOV_TOOL to explicitly select gcov tool and disable find_program
+#     - replace both functions setup_target_for_coverage_gcovr_* with a single setup_target_for_coverage_gcovr
+#     - add support for all gcovr output formats
+#
+# USAGE:
+#
+# 1. Copy this file into your cmake modules path.
+#
+# 2. Add the following line to your CMakeLists.txt (best inside an if-condition
+#    using a CMake option() to enable it just optionally):
+#      include(CodeCoverage)
+#
+# 3. Append necessary compiler flags for all supported source files:
+#      append_coverage_compiler_flags()
+#    Or for specific target:
+#      append_coverage_compiler_flags_to_target(YOUR_TARGET_NAME)
+#
+# 3.a (OPTIONAL) Set appropriate optimization flags, e.g. -O0, -O1 or -Og
+#
+# 4. If you need to exclude additional directories from the report, specify them
+#    using full paths in the COVERAGE_EXCLUDES variable before calling
+#    setup_target_for_coverage_*().
+#    Example:
+#      set(COVERAGE_EXCLUDES
+#          '${PROJECT_SOURCE_DIR}/src/dir1/*'
+#          '/path/to/my/src/dir2/*')
+#    Or, use the EXCLUDE argument to setup_target_for_coverage_*().
+#    Example:
+#      setup_target_for_coverage_gcovr(
+#          NAME coverage
+#          EXECUTABLE testrunner
+#          EXCLUDE "${PROJECT_SOURCE_DIR}/src/dir1/*" "/path/to/my/src/dir2/*")
+#
+# 4.a NOTE: With CMake 3.4+, COVERAGE_EXCLUDES or EXCLUDE can also be set
+#     relative to the BASE_DIRECTORY (default: PROJECT_SOURCE_DIR)
+#     Example:
+#       set(COVERAGE_EXCLUDES "dir1/*")
+#       setup_target_for_coverage_gcovr(
+#           NAME coverage
+#           EXECUTABLE testrunner
+#           FORMAT html-details
+#           BASE_DIRECTORY "${PROJECT_SOURCE_DIR}/src"
+#           EXCLUDE "dir2/*")
+#
+# 4.b If you need to pass specific options to gcovr, specify them in
+#     GCOVR_ADDITIONAL_ARGS variable.
+#     Example:
+#       set (GCOVR_ADDITIONAL_ARGS --exclude-throw-branches --exclude-noncode-lines -s)
+#       setup_target_for_coverage_gcovr(
+#           NAME coverage
+#           EXECUTABLE testrunner
+#           EXCLUDE "src/dir1" "src/dir2")
+#
+# 5. Use the functions described below to create a custom make target which
+#    runs your test executable and produces a code coverage report.
+#
+# 6. Build a Debug build:
+#      cmake -DCMAKE_BUILD_TYPE=Debug ..
+#      make
+#      make my_coverage_target
+
+include(CMakeParseArguments)
+
+option(CODE_COVERAGE_VERBOSE "Verbose information" FALSE)
+
+# Check prereqs
+find_program( GCOVR_PATH gcovr PATHS ${CMAKE_SOURCE_DIR}/scripts/test)
+
+if(DEFINED CODE_COVERAGE_GCOV_TOOL)
+  set(GCOV_TOOL "${CODE_COVERAGE_GCOV_TOOL}")
+elseif(DEFINED ENV{CODE_COVERAGE_GCOV_TOOL})
+  set(GCOV_TOOL "$ENV{CODE_COVERAGE_GCOV_TOOL}")
+elseif("${CMAKE_CXX_COMPILER_ID}" MATCHES "(Apple)?[Cc]lang")
+  if(APPLE)
+    execute_process( COMMAND xcrun -f llvm-cov
+      OUTPUT_VARIABLE LLVMCOV_PATH
+      OUTPUT_STRIP_TRAILING_WHITESPACE
+    )
+  else()
+    find_program( LLVMCOV_PATH llvm-cov )
+  endif()
+  if(LLVMCOV_PATH)
+    set(GCOV_TOOL "${LLVMCOV_PATH} gcov")
+  endif()
+elseif("${CMAKE_CXX_COMPILER_ID}" MATCHES "GNU")
+  find_program( GCOV_PATH gcov )
+  set(GCOV_TOOL "${GCOV_PATH}")
+endif()
+
+# Check supported compiler (Clang, GNU and Flang)
+get_property(LANGUAGES GLOBAL PROPERTY ENABLED_LANGUAGES)
+foreach(LANG ${LANGUAGES})
+  if("${CMAKE_${LANG}_COMPILER_ID}" MATCHES "(Apple)?[Cc]lang")
+    if("${CMAKE_${LANG}_COMPILER_VERSION}" VERSION_LESS 3)
+      message(FATAL_ERROR "Clang version must be 3.0.0 or greater! Aborting...")
+    endif()
+  elseif(NOT "${CMAKE_${LANG}_COMPILER_ID}" MATCHES "GNU"
+         AND NOT "${CMAKE_${LANG}_COMPILER_ID}" MATCHES "(LLVM)?[Ff]lang")
+    message(FATAL_ERROR "Compiler is not GNU or Flang! Aborting...")
+  endif()
+endforeach()
+
+set(COVERAGE_COMPILER_FLAGS "-g --coverage"
+    CACHE INTERNAL "")
+if(CMAKE_CXX_COMPILER_ID MATCHES "(GNU|Clang)")
+    include(CheckCXXCompilerFlag)
+    check_cxx_compiler_flag(-fprofile-abs-path HAVE_cxx_fprofile_abs_path)
+    if(HAVE_cxx_fprofile_abs_path)
+        set(COVERAGE_CXX_COMPILER_FLAGS "${COVERAGE_COMPILER_FLAGS} -fprofile-abs-path")
+    endif()
+    include(CheckCCompilerFlag)
+    check_c_compiler_flag(-fprofile-abs-path HAVE_c_fprofile_abs_path)
+    if(HAVE_c_fprofile_abs_path)
+        set(COVERAGE_C_COMPILER_FLAGS "${COVERAGE_COMPILER_FLAGS} -fprofile-abs-path")
+    endif()
+endif()
+
+set(CMAKE_Fortran_FLAGS_COVERAGE
+    ${COVERAGE_COMPILER_FLAGS}
+    CACHE STRING "Flags used by the Fortran compiler during coverage builds."
+    FORCE )
+set(CMAKE_CXX_FLAGS_COVERAGE
+    ${COVERAGE_COMPILER_FLAGS}
+    CACHE STRING "Flags used by the C++ compiler during coverage builds."
+    FORCE )
+set(CMAKE_C_FLAGS_COVERAGE
+    ${COVERAGE_COMPILER_FLAGS}
+    CACHE STRING "Flags used by the C compiler during coverage builds."
+    FORCE )
+set(CMAKE_EXE_LINKER_FLAGS_COVERAGE
+    ""
+    CACHE STRING "Flags used for linking binaries during coverage builds."
+    FORCE )
+set(CMAKE_SHARED_LINKER_FLAGS_COVERAGE
+    ""
+    CACHE STRING "Flags used by the shared libraries linker during coverage builds."
+    FORCE )
+mark_as_advanced(
+    CMAKE_Fortran_FLAGS_COVERAGE
+    CMAKE_CXX_FLAGS_COVERAGE
+    CMAKE_C_FLAGS_COVERAGE
+    CMAKE_EXE_LINKER_FLAGS_COVERAGE
+    CMAKE_SHARED_LINKER_FLAGS_COVERAGE )
+
+get_property(GENERATOR_IS_MULTI_CONFIG GLOBAL PROPERTY GENERATOR_IS_MULTI_CONFIG)
+if(NOT (CMAKE_BUILD_TYPE STREQUAL "Debug" OR GENERATOR_IS_MULTI_CONFIG))
+    message(WARNING "Code coverage results with an optimised (non-Debug) build may be misleading")
+endif() # NOT (CMAKE_BUILD_TYPE STREQUAL "Debug" OR GENERATOR_IS_MULTI_CONFIG)
+
+if(CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_Fortran_COMPILER_ID STREQUAL "GNU")
+    link_libraries(gcov)
+endif()
+
+# Defines a target for running and collection code coverage information
+# Builds dependencies, runs the given executable and outputs reports.
+# NOTE! The executable should always have a ZERO as exit code otherwise
+# the coverage generation will not complete.
+#
+# setup_target_for_coverage_gcovr(
+#     NAME ctest_coverage                    # New target name
+#     EXECUTABLE ctest -j ${PROCESSOR_COUNT} # Executable in PROJECT_BINARY_DIR
+#     DEPENDENCIES executable_target         # Dependencies to build first
+#     BASE_DIRECTORY "../"                   # Base directory for report
+#                                            #  (defaults to PROJECT_SOURCE_DIR)
+#     FORMAT "cobertura"                     # Output format, one of:
+#                                            #  xml cobertura sonarqube json-summary
+#                                            #  json-details coveralls csv txt
+#                                            #  html-single html-nested html-details
+#                                            #  (xml is an alias to cobertura;
+#                                            #  if no format is set, defaults to xml)
+#     EXCLUDE "src/dir1/*" "src/dir2/*"      # Patterns to exclude (can be relative
+#                                            #  to BASE_DIRECTORY, with CMake 3.4+)
+# )
+# The user can set the variable GCOVR_ADDITIONAL_ARGS to supply additional flags to the
+# GCVOR command.
+function(setup_target_for_coverage_gcovr)
+    set(options NONE)
+    set(oneValueArgs BASE_DIRECTORY NAME FORMAT)
+    set(multiValueArgs EXCLUDE EXECUTABLE EXECUTABLE_ARGS DEPENDENCIES)
+    cmake_parse_arguments(Coverage "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN})
+
+    if(NOT GCOV_TOOL)
+        message(FATAL_ERROR "Could not find gcov or llvm-cov tool! Aborting...")
+    endif()
+
+    if(NOT GCOVR_PATH)
+        message(FATAL_ERROR "Could not find gcovr tool! Aborting...")
+    endif()
+
+    # Set base directory (as absolute path), or default to PROJECT_SOURCE_DIR
+    if(DEFINED Coverage_BASE_DIRECTORY)
+        get_filename_component(BASEDIR ${Coverage_BASE_DIRECTORY} ABSOLUTE)
+    else()
+        set(BASEDIR ${PROJECT_SOURCE_DIR})
+    endif()
+
+    if(NOT DEFINED Coverage_FORMAT)
+        set(Coverage_FORMAT xml)
+    endif()
+
+    if("--output" IN_LIST GCOVR_ADDITIONAL_ARGS)
+        message(FATAL_ERROR "Unsupported --output option detected in GCOVR_ADDITIONAL_ARGS! Aborting...")
+    else()
+        if((Coverage_FORMAT STREQUAL "html-details")
+            OR (Coverage_FORMAT STREQUAL "html-nested"))
+            set(GCOVR_OUTPUT_FILE ${PROJECT_BINARY_DIR}/${Coverage_NAME}/index.html)
+            set(GCOVR_CREATE_FOLDER ${PROJECT_BINARY_DIR}/${Coverage_NAME})
+        elseif(Coverage_FORMAT STREQUAL "html-single")
+            set(GCOVR_OUTPUT_FILE ${Coverage_NAME}.html)
+        elseif((Coverage_FORMAT STREQUAL "json-summary")
+            OR (Coverage_FORMAT STREQUAL "json-details")
+            OR (Coverage_FORMAT STREQUAL "coveralls"))
+            set(GCOVR_OUTPUT_FILE ${Coverage_NAME}.json)
+        elseif(Coverage_FORMAT STREQUAL "txt")
+            set(GCOVR_OUTPUT_FILE ${Coverage_NAME}.txt)
+        elseif(Coverage_FORMAT STREQUAL "csv")
+            set(GCOVR_OUTPUT_FILE ${Coverage_NAME}.csv)
+        else()
+            set(GCOVR_OUTPUT_FILE ${Coverage_NAME}.xml)
+        endif()
+    endif()
+
+    if((Coverage_FORMAT STREQUAL "cobertura")
+        OR (Coverage_FORMAT STREQUAL "xml"))
+        list(APPEND GCOVR_ADDITIONAL_ARGS --cobertura "${GCOVR_OUTPUT_FILE}" )
+        list(APPEND GCOVR_ADDITIONAL_ARGS --cobertura-pretty )
+        set(Coverage_FORMAT cobertura) # overwrite xml
+    elseif(Coverage_FORMAT STREQUAL "sonarqube")
+        list(APPEND GCOVR_ADDITIONAL_ARGS --sonarqube "${GCOVR_OUTPUT_FILE}" )
+    elseif(Coverage_FORMAT STREQUAL "json-summary")
+        list(APPEND GCOVR_ADDITIONAL_ARGS --json-summary "${GCOVR_OUTPUT_FILE}" )
+        list(APPEND GCOVR_ADDITIONAL_ARGS --json-summary-pretty)
+    elseif(Coverage_FORMAT STREQUAL "json-details")
+        list(APPEND GCOVR_ADDITIONAL_ARGS --json "${GCOVR_OUTPUT_FILE}" )
+        list(APPEND GCOVR_ADDITIONAL_ARGS --json-pretty)
+    elseif(Coverage_FORMAT STREQUAL "coveralls")
+        list(APPEND GCOVR_ADDITIONAL_ARGS --coveralls "${GCOVR_OUTPUT_FILE}" )
+        list(APPEND GCOVR_ADDITIONAL_ARGS --coveralls-pretty)
+    elseif(Coverage_FORMAT STREQUAL "csv")
+        list(APPEND GCOVR_ADDITIONAL_ARGS --csv "${GCOVR_OUTPUT_FILE}" )
+    elseif(Coverage_FORMAT STREQUAL "txt")
+        list(APPEND GCOVR_ADDITIONAL_ARGS --txt "${GCOVR_OUTPUT_FILE}" )
+    elseif(Coverage_FORMAT STREQUAL "html-single")
+        list(APPEND GCOVR_ADDITIONAL_ARGS --html "${GCOVR_OUTPUT_FILE}" )
+        list(APPEND GCOVR_ADDITIONAL_ARGS --html-self-contained)
+    elseif(Coverage_FORMAT STREQUAL "html-nested")
+        list(APPEND GCOVR_ADDITIONAL_ARGS --html-nested "${GCOVR_OUTPUT_FILE}" )
+    elseif(Coverage_FORMAT STREQUAL "html-details")
+        list(APPEND GCOVR_ADDITIONAL_ARGS --html-details "${GCOVR_OUTPUT_FILE}" )
+    else()
+        message(FATAL_ERROR "Unsupported output style ${Coverage_FORMAT}! Aborting...")
+    endif()
+
+    # Collect excludes (CMake 3.4+: Also compute absolute paths)
+    set(GCOVR_EXCLUDES "")
+    foreach(EXCLUDE ${Coverage_EXCLUDE} ${COVERAGE_EXCLUDES} ${COVERAGE_GCOVR_EXCLUDES})
+        if(CMAKE_VERSION VERSION_GREATER 3.4)
+            get_filename_component(EXCLUDE ${EXCLUDE} ABSOLUTE BASE_DIR ${BASEDIR})
+        endif()
+        list(APPEND GCOVR_EXCLUDES "${EXCLUDE}")
+    endforeach()
+    list(REMOVE_DUPLICATES GCOVR_EXCLUDES)
+
+    # Combine excludes to several -e arguments
+    set(GCOVR_EXCLUDE_ARGS "")
+    foreach(EXCLUDE ${GCOVR_EXCLUDES})
+        list(APPEND GCOVR_EXCLUDE_ARGS "-e")
+        list(APPEND GCOVR_EXCLUDE_ARGS "${EXCLUDE}")
+    endforeach()
+
+    # Set up commands which will be run to generate coverage data
+    # Run tests
+    set(GCOVR_EXEC_TESTS_CMD
+        ${Coverage_EXECUTABLE} ${Coverage_EXECUTABLE_ARGS}
+    )
+
+    # Create folder
+    if(DEFINED GCOVR_CREATE_FOLDER)
+        set(GCOVR_FOLDER_CMD
+            ${CMAKE_COMMAND} -E make_directory ${GCOVR_CREATE_FOLDER})
+    else()
+        set(GCOVR_FOLDER_CMD echo) # dummy
+    endif()
+
+    # Running gcovr
+    set(GCOVR_CMD
+        ${GCOVR_PATH}
+        --gcov-executable ${GCOV_TOOL}
+        --gcov-ignore-parse-errors=negative_hits.warn_once_per_file
+        -r ${BASEDIR}
+        ${GCOVR_ADDITIONAL_ARGS}
+        ${GCOVR_EXCLUDE_ARGS}
+        --object-directory=${PROJECT_BINARY_DIR}
+    )
+
+    if(CODE_COVERAGE_VERBOSE)
+        message(STATUS "Executed command report")
+
+        message(STATUS "Command to run tests: ")
+        string(REPLACE ";" " " GCOVR_EXEC_TESTS_CMD_SPACED "${GCOVR_EXEC_TESTS_CMD}")
+        message(STATUS "${GCOVR_EXEC_TESTS_CMD_SPACED}")
+
+        if(NOT GCOVR_FOLDER_CMD STREQUAL "echo")
+            message(STATUS "Command to create a folder: ")
+            string(REPLACE ";" " " GCOVR_FOLDER_CMD_SPACED "${GCOVR_FOLDER_CMD}")
+            message(STATUS "${GCOVR_FOLDER_CMD_SPACED}")
+        endif()
+
+        message(STATUS "Command to generate gcovr coverage data: ")
+        string(REPLACE ";" " " GCOVR_CMD_SPACED "${GCOVR_CMD}")
+        message(STATUS "${GCOVR_CMD_SPACED}")
+    endif()
+
+    add_custom_target(${Coverage_NAME}
+        COMMAND ${GCOVR_EXEC_TESTS_CMD}
+        COMMAND ${GCOVR_FOLDER_CMD}
+        COMMAND ${GCOVR_CMD}
+
+        BYPRODUCTS ${GCOVR_OUTPUT_FILE}
+        WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
+        DEPENDS ${Coverage_DEPENDENCIES}
+        VERBATIM # Protect arguments to commands
+        COMMENT "Running gcovr to produce code coverage report."
+    )
+
+    # Show info where to find the report
+    add_custom_command(TARGET ${Coverage_NAME} POST_BUILD
+        COMMAND ;
+        COMMENT "Code coverage report saved in ${GCOVR_OUTPUT_FILE} formatted as ${Coverage_FORMAT}"
+    )
+endfunction() # setup_target_for_coverage_gcovr
+
+function(append_coverage_compiler_flags)
+    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${COVERAGE_COMPILER_FLAGS}" PARENT_SCOPE)
+    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${COVERAGE_COMPILER_FLAGS}" PARENT_SCOPE)
+    set(CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} ${COVERAGE_COMPILER_FLAGS}" PARENT_SCOPE)
+    message(STATUS "Appending code coverage compiler flags: ${COVERAGE_COMPILER_FLAGS}")
+endfunction() # append_coverage_compiler_flags
+
+# Setup coverage for specific library
+function(append_coverage_compiler_flags_to_target name)
+    separate_arguments(_flag_list NATIVE_COMMAND "${COVERAGE_COMPILER_FLAGS}")
+    target_compile_options(${name} PRIVATE ${_flag_list})
+    if(CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_Fortran_COMPILER_ID STREQUAL "GNU")
+        target_link_libraries(${name} PRIVATE gcov)
+    endif()
+endfunction()

cmake/RippledCompiler.cmake

@@ -120,6 +120,7 @@ else ()
   target_link_libraries (common
     INTERFACE
       -rdynamic
+      $<$<BOOL:${is_linux}>:-Wl,-z,relro,-z,now,--build-id>
       # link to static libc/c++ iff:
       #   * static option set and
       #   * NOT APPLE (AppleClang does not support static libc/c++) and
@@ -130,7 +131,27 @@ else ()
       >)
 endif ()
 
-if (use_gold AND is_gcc)
+# Antithesis instrumentation will only be built and deployed using machines running Linux.
+if (voidstar)
+  if (NOT CMAKE_BUILD_TYPE STREQUAL "Debug")
+    message(FATAL_ERROR "Antithesis instrumentation requires Debug build type, aborting...")
+  elseif (NOT is_linux)
+    message(FATAL_ERROR "Antithesis instrumentation requires Linux, aborting...")
+  elseif (NOT (is_clang AND CMAKE_CXX_COMPILER_VERSION VERSION_GREATER_EQUAL 16.0))
+    message(FATAL_ERROR "Antithesis instrumentation requires Clang version 16 or later, aborting...")
+  endif ()
+endif ()
+
+if (use_mold)
+  # use mold linker if available
+  execute_process (
+    COMMAND ${CMAKE_CXX_COMPILER} -fuse-ld=mold -Wl,--version
+    ERROR_QUIET OUTPUT_VARIABLE LD_VERSION)
+  if ("${LD_VERSION}" MATCHES "mold")
+    target_link_libraries (common INTERFACE -fuse-ld=mold)
+  endif ()
+  unset (LD_VERSION)
+elseif (use_gold AND is_gcc)
   # use gold linker if available
   execute_process (
     COMMAND ${CMAKE_CXX_COMPILER} -fuse-ld=gold -Wl,--version
@@ -162,9 +183,7 @@ if (use_gold AND is_gcc)
         $<$<NOT:$<BOOL:${static}>>:-Wl,--disable-new-dtags>)
   endif ()
   unset (LD_VERSION)
-endif ()
-
-if (use_lld)
+elseif (use_lld)
   # use lld linker if available
   execute_process (
     COMMAND ${CMAKE_CXX_COMPILER} -fuse-ld=lld -Wl,--version
@@ -175,6 +194,7 @@ if (use_lld)
   unset (LD_VERSION)
 endif()
 
+
 if (assert)
   foreach (var_ CMAKE_C_FLAGS_RELEASE CMAKE_CXX_FLAGS_RELEASE)
     STRING (REGEX REPLACE "[-/]DNDEBUG" "" ${var_} "${${var_}}")

cmake/RippledCore.cmake

@@ -0,0 +1,211 @@
+#[===================================================================[
+  Exported targets.
+#]===================================================================]
+
+include(target_protobuf_sources)
+
+# Protocol buffers cannot participate in a unity build,
+# because all the generated sources
+# define a bunch of `static const` variables with the same names,
+# so we just build them as a separate library.
+add_library(xrpl.libpb)
+set_target_properties(xrpl.libpb PROPERTIES UNITY_BUILD OFF)
+target_protobuf_sources(xrpl.libpb xrpl/proto
+  LANGUAGE cpp
+  IMPORT_DIRS include/xrpl/proto
+  PROTOS include/xrpl/proto/ripple.proto
+)
+
+file(GLOB_RECURSE protos "include/xrpl/proto/org/*.proto")
+target_protobuf_sources(xrpl.libpb xrpl/proto
+  LANGUAGE cpp
+  IMPORT_DIRS include/xrpl/proto
+  PROTOS "${protos}"
+)
+target_protobuf_sources(xrpl.libpb xrpl/proto
+  LANGUAGE grpc
+  IMPORT_DIRS include/xrpl/proto
+  PROTOS "${protos}"
+  PLUGIN protoc-gen-grpc=$<TARGET_FILE:gRPC::grpc_cpp_plugin>
+  GENERATE_EXTENSIONS .grpc.pb.h .grpc.pb.cc
+)
+
+target_compile_options(xrpl.libpb
+  PUBLIC
+    $<$<BOOL:${MSVC}>:-wd4996>
+    $<$<BOOL:${XCODE}>:
+      --system-header-prefix="google/protobuf"
+      -Wno-deprecated-dynamic-exception-spec
+    >
+  PRIVATE
+    $<$<BOOL:${MSVC}>:-wd4065>
+    $<$<NOT:$<BOOL:${MSVC}>>:-Wno-deprecated-declarations>
+)
+
+target_link_libraries(xrpl.libpb
+  PUBLIC
+    protobuf::libprotobuf
+    gRPC::grpc++
+)
+
+# TODO: Clean up the number of library targets later.
+add_library(xrpl.imports.main INTERFACE)
+
+target_link_libraries(xrpl.imports.main
+  INTERFACE
+    LibArchive::LibArchive
+    OpenSSL::Crypto
+    Ripple::boost
+    wasmedge::wasmedge
+    Ripple::opts
+    Ripple::syslibs
+    absl::random_random
+    date::date
+    ed25519::ed25519
+    secp256k1::secp256k1
+    xrpl.libpb
+    xxHash::xxhash
+    $<$<BOOL:${voidstar}>:antithesis-sdk-cpp>
+)
+
+include(add_module)
+include(target_link_modules)
+
+# Level 01
+add_module(xrpl beast)
+target_link_libraries(xrpl.libxrpl.beast PUBLIC
+  xrpl.imports.main
+  xrpl.libpb
+)
+
+# Level 02
+add_module(xrpl basics)
+target_link_libraries(xrpl.libxrpl.basics PUBLIC xrpl.libxrpl.beast)
+
+# Level 03
+add_module(xrpl json)
+target_link_libraries(xrpl.libxrpl.json PUBLIC xrpl.libxrpl.basics)
+
+add_module(xrpl crypto)
+target_link_libraries(xrpl.libxrpl.crypto PUBLIC xrpl.libxrpl.basics)
+
+add_module(xrpl hook)
+target_link_libraries(xrpl.libxrpl.hook PUBLIC xrpl.libxrpl.basics)
+
+# Level 04
+add_module(xrpl protocol)
+target_link_libraries(xrpl.libxrpl.protocol PUBLIC
+  xrpl.libxrpl.crypto
+  xrpl.libxrpl.hook
+  xrpl.libxrpl.json
+)
+
+# Level 05
+add_module(xrpl resource)
+target_link_libraries(xrpl.libxrpl.resource PUBLIC xrpl.libxrpl.protocol)
+
+add_module(xrpl server)
+target_link_libraries(xrpl.libxrpl.server PUBLIC xrpl.libxrpl.protocol)
+
+
+add_library(xrpl.libxrpl)
+set_target_properties(xrpl.libxrpl PROPERTIES OUTPUT_NAME xrpl)
+
+# Try to find the ACL library
+find_library(ACL_LIBRARY NAMES acl)
+
+# Check if ACL was found
+if(ACL_LIBRARY)
+message(STATUS "Found ACL: ${ACL_LIBRARY}")
+else()
+message(STATUS "ACL not found, continuing without ACL support")
+endif()
+
+add_library(xrpl::libxrpl ALIAS xrpl.libxrpl)
+
+file(GLOB_RECURSE sources CONFIGURE_DEPENDS
+  "${CMAKE_CURRENT_SOURCE_DIR}/src/libxrpl/*.cpp"
+)
+target_sources(xrpl.libxrpl PRIVATE ${sources})
+
+target_link_modules(xrpl PUBLIC
+  basics
+  beast
+  crypto
+  hook
+  json
+  protocol
+  resource
+  server
+)
+
+# All headers in libxrpl are in modules.
+# Uncomment this stanza if you have not yet moved new headers into a module.
+# target_include_directories(xrpl.libxrpl
+#   PRIVATE
+#     $<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}/src>
+#   PUBLIC
+#     $<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}/include>
+#     $<INSTALL_INTERFACE:include>)
+
+if(xrpld)
+  add_executable(rippled)
+  if(tests)
+    target_compile_definitions(rippled PUBLIC ENABLE_TESTS)
+  endif()
+  target_include_directories(rippled
+    PRIVATE
+      $<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}/src>
+  )
+
+  file(GLOB_RECURSE sources CONFIGURE_DEPENDS
+    "${CMAKE_CURRENT_SOURCE_DIR}/src/xrpld/*.cpp"
+  )
+  target_sources(rippled PRIVATE ${sources})
+
+  if(tests)
+    file(GLOB_RECURSE sources CONFIGURE_DEPENDS
+      "${CMAKE_CURRENT_SOURCE_DIR}/src/test/*.cpp"
+    )
+    target_sources(rippled PRIVATE ${sources})
+  endif()
+
+  target_link_libraries(rippled
+    Ripple::boost
+    Ripple::opts
+    Ripple::libs
+    xrpl.libxrpl
+  )
+  exclude_if_included(rippled)
+  # define a macro for tests that might need to
+  # be exluded or run differently in CI environment
+  if(is_ci)
+    target_compile_definitions(rippled PRIVATE RIPPLED_RUNNING_IN_CI)
+  endif ()
+
+  if(voidstar)
+    target_compile_options(rippled
+      PRIVATE
+        -fsanitize-coverage=trace-pc-guard
+    )
+    # rippled requires access to antithesis-sdk-cpp implementation file
+    # antithesis_instrumentation.h, which is not exported as INTERFACE
+    target_include_directories(rippled
+      PRIVATE
+        ${CMAKE_SOURCE_DIR}/external/antithesis-sdk
+    )
+  endif()
+
+  # any files that don't play well with unity should be added here
+  if(tests)
+    set_source_files_properties(
+      # these two seem to produce conflicts in beast teardown template methods
+      src/test/rpc/ValidatorRPC_test.cpp
+      src/test/ledger/Invariants_test.cpp
+      PROPERTIES SKIP_UNITY_BUILD_INCLUSION TRUE)
+  endif()
+endif()
+
+if(ACL_LIBRARY)
+  target_link_libraries(rippled ${ACL_LIBRARY})
+endif()

cmake/RippledCov.cmake

@@ -0,0 +1,38 @@
+#[===================================================================[
+   coverage report target
+#]===================================================================]
+
+if(NOT coverage)
+  message(FATAL_ERROR "Code coverage not enabled! Aborting ...")
+endif()
+
+if(CMAKE_CXX_COMPILER_ID MATCHES "MSVC")
+  message(WARNING "Code coverage on Windows is not supported, ignoring 'coverage' flag")
+  return()
+endif()
+
+include(CodeCoverage)
+
+# The instructions for these commands come from the `CodeCoverage` module,
+# which was copied from https://github.com/bilke/cmake-modules, commit fb7d2a3,
+# then locally changed (see CHANGES: section in `CodeCoverage.cmake`)
+
+set(GCOVR_ADDITIONAL_ARGS ${coverage_extra_args})
+if(NOT GCOVR_ADDITIONAL_ARGS STREQUAL "")
+  separate_arguments(GCOVR_ADDITIONAL_ARGS)
+endif()
+
+list(APPEND GCOVR_ADDITIONAL_ARGS
+  --exclude-throw-branches
+  --exclude-noncode-lines
+  --exclude-unreachable-branches -s
+  -j ${coverage_test_parallelism})
+
+setup_target_for_coverage_gcovr(
+  NAME coverage
+  FORMAT ${coverage_format}
+  EXECUTABLE rippled
+  EXECUTABLE_ARGS --unittest$<$<BOOL:${coverage_test}>:=${coverage_test}> --unittest-jobs ${coverage_test_parallelism} --quiet --unittest-log
+  EXCLUDE "src/test" "include/xrpl/beast/test" "include/xrpl/beast/unit_test" "${CMAKE_BINARY_DIR}/pb-xrpl.libpb"
+  DEPENDENCIES rippled
+)

cmake/RippledDocs.cmake

@@ -1,6 +1,13 @@
 #[===================================================================[
    docs target (optional)
 #]===================================================================]
+
+# Early return if the `docs` directory is missing,
+# e.g. when we are building a Conan package.
+if(NOT EXISTS docs)
+  return()
+endif()
+
 if (tests)
   find_package (Doxygen)
   if (NOT TARGET Doxygen::doxygen)
@@ -19,8 +26,7 @@ if (tests)
     src/ripple/*.cpp
     src/ripple/*.md
     src/test/*.h
-    src/test/*.md
-    Builds/*/README.md)
+    src/test/*.md)
   list (APPEND doxygen_input
     README.md
     RELEASENOTES.md

cmake/RippledInstall.cmake

@@ -2,30 +2,43 @@
    install stuff
 #]===================================================================]
 
+include(create_symbolic_link)
+
 install (
   TARGETS
-    ed25519-donna
     common
     opts
     ripple_syslibs
     ripple_boost
-    xrpl_core
+    xrpl.imports.main
+    xrpl.libpb
+    xrpl.libxrpl.basics
+    xrpl.libxrpl.beast
+    xrpl.libxrpl.hook
+    xrpl.libxrpl.crypto
+    xrpl.libxrpl.json
+    xrpl.libxrpl.protocol
+    xrpl.libxrpl.resource
+    xrpl.libxrpl.server
+    xrpl.libxrpl
+    antithesis-sdk-cpp
   EXPORT RippleExports
   LIBRARY DESTINATION lib
   ARCHIVE DESTINATION lib
   RUNTIME DESTINATION bin
   INCLUDES DESTINATION include)
 
-if(${INSTALL_SECP256K1})
-install (
-  TARGETS
-    secp256k1
-  EXPORT RippleExports
-  LIBRARY DESTINATION lib
-  ARCHIVE DESTINATION lib
-  RUNTIME DESTINATION bin
-  INCLUDES DESTINATION include)
-endif()
+install(
+  DIRECTORY "${CMAKE_CURRENT_SOURCE_DIR}/include/xrpl"
+  DESTINATION "${CMAKE_INSTALL_INCLUDEDIR}"
+)
+
+install(CODE "
+  set(CMAKE_MODULE_PATH \"${CMAKE_MODULE_PATH}\")
+  include(create_symbolic_link)
+  create_symbolic_link(xrpl \
+    \${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_INCLUDEDIR}/ripple)
+")
 
 install (EXPORT RippleExports
   FILE RippleTargets.cmake
@@ -37,14 +50,9 @@ write_basic_package_version_file (
   VERSION ${rippled_version}
   COMPATIBILITY SameMajorVersion)
 
-if (is_root_project)
+if (is_root_project AND TARGET rippled)
   install (TARGETS rippled RUNTIME DESTINATION bin)
   set_target_properties(rippled PROPERTIES INSTALL_RPATH_USE_LINK_PATH ON)
-  install (
-    FILES
-      ${CMAKE_CURRENT_SOURCE_DIR}/Builds/CMake/RippleConfig.cmake
-      ${CMAKE_CURRENT_BINARY_DIR}/RippleConfigVersion.cmake
-    DESTINATION lib/cmake/ripple)
   # sample configs should not overwrite existing files
   # install if-not-exists workaround as suggested by
   # https://cmake.org/Bug/view.php?id=12646
@@ -59,4 +67,16 @@ if (is_root_project)
     copy_if_not_exists(\"${CMAKE_CURRENT_SOURCE_DIR}/cfg/rippled-example.cfg\" etc rippled.cfg)
     copy_if_not_exists(\"${CMAKE_CURRENT_SOURCE_DIR}/cfg/validators-example.txt\" etc validators.txt)
   ")
+  install(CODE "
+    set(CMAKE_MODULE_PATH \"${CMAKE_MODULE_PATH}\")
+    include(create_symbolic_link)
+    create_symbolic_link(rippled${suffix} \
+      \${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_BINDIR}/xrpld${suffix})
+  ")
 endif ()
+
+install (
+  FILES
+    ${CMAKE_CURRENT_SOURCE_DIR}/cmake/RippleConfig.cmake
+    ${CMAKE_CURRENT_BINARY_DIR}/RippleConfigVersion.cmake
+  DESTINATION lib/cmake/ripple)

cmake/RippledInterface.cmake

@@ -7,6 +7,9 @@ add_library (Ripple::opts ALIAS opts)
 target_compile_definitions (opts
   INTERFACE
     BOOST_ASIO_DISABLE_HANDLER_TYPE_REQUIREMENTS
+    BOOST_ASIO_USE_TS_EXECUTOR_AS_DEFAULT
+    BOOST_CONTAINER_FWD_BAD_DEQUE
+    HAS_UNCAUGHT_EXCEPTIONS=1
     $<$<BOOL:${boost_show_deprecated}>:
       BOOST_ASIO_NO_DEPRECATED
       BOOST_FILESYSTEM_NO_DEPRECATED
@@ -18,20 +21,22 @@ target_compile_definitions (opts
     >
     $<$<BOOL:${beast_no_unit_test_inline}>:BEAST_NO_UNIT_TEST_INLINE=1>
     $<$<BOOL:${beast_disable_autolink}>:BEAST_DONT_AUTOLINK_TO_WIN32_LIBRARIES=1>
-    $<$<BOOL:${single_io_service_thread}>:RIPPLE_SINGLE_IO_SERVICE_THREAD=1>)
+    $<$<BOOL:${single_io_service_thread}>:RIPPLE_SINGLE_IO_SERVICE_THREAD=1>
+    $<$<BOOL:${voidstar}>:ENABLE_VOIDSTAR>)
 target_compile_options (opts
   INTERFACE
     $<$<AND:$<BOOL:${is_gcc}>,$<COMPILE_LANGUAGE:CXX>>:-Wsuggest-override>
+    $<$<BOOL:${is_gcc}>:-Wno-maybe-uninitialized>
     $<$<BOOL:${perf}>:-fno-omit-frame-pointer>
-    $<$<AND:$<BOOL:${is_gcc}>,$<BOOL:${coverage}>>:-fprofile-arcs -ftest-coverage>
-    $<$<AND:$<BOOL:${is_clang}>,$<BOOL:${coverage}>>:-fprofile-instr-generate -fcoverage-mapping>
+    $<$<AND:$<BOOL:${is_gcc}>,$<BOOL:${coverage}>>:-g --coverage -fprofile-abs-path>
+    $<$<AND:$<BOOL:${is_clang}>,$<BOOL:${coverage}>>:-g --coverage>
     $<$<BOOL:${profile}>:-pg>
     $<$<AND:$<BOOL:${is_gcc}>,$<BOOL:${profile}>>:-p>)
 
 target_link_libraries (opts
   INTERFACE
-    $<$<AND:$<BOOL:${is_gcc}>,$<BOOL:${coverage}>>:-fprofile-arcs -ftest-coverage>
-    $<$<AND:$<BOOL:${is_clang}>,$<BOOL:${coverage}>>:-fprofile-instr-generate -fcoverage-mapping>
+    $<$<AND:$<BOOL:${is_gcc}>,$<BOOL:${coverage}>>:-g --coverage -fprofile-abs-path>
+    $<$<AND:$<BOOL:${is_clang}>,$<BOOL:${coverage}>>:-g --coverage>
     $<$<BOOL:${profile}>:-pg>
     $<$<AND:$<BOOL:${is_gcc}>,$<BOOL:${profile}>>:-p>)
 

cmake/RippledSanity.cmake

@@ -2,6 +2,8 @@
    convenience variables and sanity checks
 #]===================================================================]
 
+include(ProcessorCount)
+
 if (NOT ep_procs)
   ProcessorCount(ep_procs)
   if (ep_procs GREATER 1)

cmake/RippledSettings.cmake

@@ -0,0 +1,134 @@
+#[===================================================================[
+   declare user options/settings
+#]===================================================================]
+
+include(ProcessorCount)
+
+ProcessorCount(PROCESSOR_COUNT)
+
+option(assert "Enables asserts, even in release builds" OFF)
+
+option(xrpld "Build xrpld" ON)
+
+option(tests "Build tests" ON)
+
+option(unity "Creates a build using UNITY support in cmake. This is the default" ON)
+if(unity)
+  if(NOT is_ci)
+    set(CMAKE_UNITY_BUILD_BATCH_SIZE 15 CACHE STRING "")
+  endif()
+  set(CMAKE_UNITY_BUILD ON CACHE BOOL "Do a unity build")
+endif()
+if(is_clang AND is_linux)
+  option(voidstar "Enable Antithesis instrumentation." OFF)
+endif()
+if(is_gcc OR is_clang)
+  option(coverage "Generates coverage info." OFF)
+  option(profile "Add profiling flags" OFF)
+  set(coverage_test_parallelism "${PROCESSOR_COUNT}" CACHE STRING
+    "Unit tests parallelism for the purpose of coverage report.")
+  set(coverage_format "html-details" CACHE STRING
+    "Output format of the coverage report.")
+  set(coverage_extra_args "" CACHE STRING
+    "Additional arguments to pass to gcovr.")
+  set(coverage_test "" CACHE STRING
+    "On gcc & clang, the specific unit test(s) to run for coverage. Default is all tests.")
+  if(coverage_test AND NOT coverage)
+    set(coverage ON CACHE BOOL "gcc/clang only" FORCE)
+  endif()
+  option(wextra "compile with extra gcc/clang warnings enabled" ON)
+else()
+  set(profile OFF CACHE BOOL "gcc/clang only" FORCE)
+  set(coverage OFF CACHE BOOL "gcc/clang only" FORCE)
+  set(wextra OFF CACHE BOOL "gcc/clang only" FORCE)
+endif()
+if(is_linux)
+  option(BUILD_SHARED_LIBS "build shared ripple libraries" OFF)
+  option(static "link protobuf, openssl, libc++, and boost statically" ON)
+  option(perf "Enables flags that assist with perf recording" OFF)
+  option(use_gold "enables detection of gold (binutils) linker" ON)
+  option(use_mold "enables detection of mold (binutils) linker" ON)
+else()
+  # we are not ready to allow shared-libs on windows because it would require
+  # export declarations. On macos it's more feasible, but static openssl
+  # produces odd linker errors, thus we disable shared lib builds for now.
+  set(BUILD_SHARED_LIBS OFF CACHE BOOL "build shared ripple libraries - OFF for win/macos" FORCE)
+  set(static ON CACHE BOOL "static link, linux only. ON for WIN/macos" FORCE)
+  set(perf OFF CACHE BOOL "perf flags, linux only" FORCE)
+  set(use_gold OFF CACHE BOOL "gold linker, linux only" FORCE)
+  set(use_mold OFF CACHE BOOL "mold linker, linux only" FORCE)
+endif()
+if(is_clang)
+  option(use_lld "enables detection of lld linker" ON)
+else()
+  set(use_lld OFF CACHE BOOL "try lld linker, clang only" FORCE)
+endif()
+option(jemalloc "Enables jemalloc for heap profiling" OFF)
+option(werr "treat warnings as errors" OFF)
+option(local_protobuf
+  "Force a local build of protobuf instead of looking for an installed version." OFF)
+option(local_grpc
+  "Force a local build of gRPC instead of looking for an installed version." OFF)
+
+# this one is a string and therefore can't be an option
+set(san "" CACHE STRING "On gcc & clang, add sanitizer instrumentation")
+set_property(CACHE san PROPERTY STRINGS ";undefined;memory;address;thread")
+if(san)
+  string(TOLOWER ${san} san)
+  set(SAN_FLAG "-fsanitize=${san}")
+  set(SAN_LIB "")
+  if(is_gcc)
+    if(san STREQUAL "address")
+      set(SAN_LIB "asan")
+    elseif(san STREQUAL "thread")
+      set(SAN_LIB "tsan")
+    elseif(san STREQUAL "memory")
+      set(SAN_LIB "msan")
+    elseif(san STREQUAL "undefined")
+      set(SAN_LIB "ubsan")
+    endif()
+  endif()
+  set(_saved_CRL ${CMAKE_REQUIRED_LIBRARIES})
+  set(CMAKE_REQUIRED_LIBRARIES "${SAN_FLAG};${SAN_LIB}")
+  check_cxx_compiler_flag(${SAN_FLAG} COMPILER_SUPPORTS_SAN)
+  set(CMAKE_REQUIRED_LIBRARIES ${_saved_CRL})
+  if(NOT COMPILER_SUPPORTS_SAN)
+    message(FATAL_ERROR "${san} sanitizer does not seem to be supported by your compiler")
+  endif()
+endif()
+set(container_label "" CACHE STRING "tag to use for package building containers")
+option(packages_only
+  "ONLY generate package building targets. This is special use-case and almost \
+   certainly not what you want. Use with caution as you won't be able to build \
+   any compiled targets locally." OFF)
+option(have_package_container
+  "Sometimes you already have the tagged container you want to use for package \
+   building and you don't want docker to rebuild it. This flag will detach the \
+   dependency of the package build from the container build. It's an advanced \
+   use case and most likely you should not be touching this flag." OFF)
+
+# the remaining options are obscure and rarely used
+option(beast_no_unit_test_inline
+  "Prevents unit test definitions from being inserted into global table"
+  OFF)
+option(single_io_service_thread
+  "Restricts the number of threads calling io_service::run to one. \
+  This can be useful when debugging."
+  OFF)
+option(boost_show_deprecated
+  "Allow boost to fail on deprecated usage. Only useful if you're trying\
+  to find deprecated calls."
+  OFF)
+option(beast_hashers
+  "Use local implementations for sha/ripemd hashes (experimental, not recommended)"
+  OFF)
+
+if(WIN32)
+  option(beast_disable_autolink "Disables autolinking of system libraries on WIN32" OFF)
+else()
+  set(beast_disable_autolink OFF CACHE BOOL "WIN32 only" FORCE)
+endif()
+if(coverage)
+  message(STATUS "coverage build requested - forcing Debug build")
+  set(CMAKE_BUILD_TYPE Debug CACHE STRING "build type" FORCE)
+endif()

cmake/RippledValidatorKeys.cmake

@@ -2,9 +2,9 @@ option (validator_keys "Enables building of validator-keys-tool as a separate ta
 
 if (validator_keys)
   git_branch (current_branch)
-  # default to tracking VK develop branch unless we are on master/release
-  if (NOT (current_branch STREQUAL "master" OR current_branch STREQUAL "release"))
-    set (current_branch "develop")
+  # default to tracking VK master branch unless we are on release
+  if (NOT (current_branch STREQUAL "release"))
+    set (current_branch "master")
   endif ()
   message (STATUS "tracking ValidatorKeys branch: ${current_branch}")
 

cmake/RippledVersion.cmake

@@ -0,0 +1,15 @@
+#[===================================================================[
+   read version from source
+#]===================================================================]
+
+file(STRINGS src/libxrpl/protocol/BuildInfo.cpp BUILD_INFO)
+foreach(line_ ${BUILD_INFO})
+  if(line_ MATCHES "versionString[ ]*=[ ]*\"(.+)\"")
+    set(rippled_version ${CMAKE_MATCH_1})
+  endif()
+endforeach()
+if(rippled_version)
+  message(STATUS "rippled version: ${rippled_version}")
+else()
+  message(FATAL_ERROR "unable to determine rippled version")
+endif()

cmake/add_module.cmake

@@ -0,0 +1,37 @@
+include(isolate_headers)
+
+# Create an OBJECT library target named
+#
+#   ${PROJECT_NAME}.lib${parent}.${name}
+#
+# with sources in src/lib${parent}/${name}
+# and headers in include/${parent}/${name}
+# that cannot include headers from other directories in include/
+# unless they come through linked libraries.
+#
+# add_module(parent a)
+# add_module(parent b)
+# target_link_libraries(project.libparent.b PUBLIC project.libparent.a)
+function(add_module parent name)
+  set(target ${PROJECT_NAME}.lib${parent}.${name})
+  add_library(${target} OBJECT)
+  file(GLOB_RECURSE sources CONFIGURE_DEPENDS
+    "${CMAKE_CURRENT_SOURCE_DIR}/src/lib${parent}/${name}/*.cpp"
+  )
+  target_sources(${target} PRIVATE ${sources})
+  target_include_directories(${target} PUBLIC
+    "$<INSTALL_INTERFACE:${CMAKE_INSTALL_INCLUDEDIR}>"
+  )
+  isolate_headers(
+    ${target}
+    "${CMAKE_CURRENT_SOURCE_DIR}/include"
+    "${CMAKE_CURRENT_SOURCE_DIR}/include/${parent}/${name}"
+    PUBLIC
+  )
+  isolate_headers(
+    ${target}
+    "${CMAKE_CURRENT_SOURCE_DIR}/src"
+    "${CMAKE_CURRENT_SOURCE_DIR}/src/lib${parent}/${name}"
+    PRIVATE
+  )
+endfunction()

cmake/conan/Boost.cmake

@@ -0,0 +1,54 @@
+find_package(Boost 1.83 REQUIRED
+  COMPONENTS
+    chrono
+    container
+    context
+    coroutine
+    date_time
+    filesystem
+    json
+    program_options
+    regex
+    system
+    thread
+)
+
+add_library(ripple_boost INTERFACE)
+add_library(Ripple::boost ALIAS ripple_boost)
+if(XCODE)
+  target_include_directories(ripple_boost BEFORE INTERFACE ${Boost_INCLUDE_DIRS})
+  target_compile_options(ripple_boost INTERFACE --system-header-prefix="boost/")
+else()
+  target_include_directories(ripple_boost SYSTEM BEFORE INTERFACE ${Boost_INCLUDE_DIRS})
+endif()
+
+target_link_libraries(ripple_boost
+  INTERFACE
+    Boost::boost
+    Boost::chrono
+    Boost::container
+    Boost::coroutine
+    Boost::date_time
+    Boost::filesystem
+    Boost::json
+    Boost::program_options
+    Boost::regex
+    Boost::system
+    Boost::iostreams
+    Boost::thread)
+if(Boost_COMPILER)
+  target_link_libraries(ripple_boost INTERFACE Boost::disable_autolinking)
+endif()
+if(san AND is_clang)
+  # TODO: gcc does not support -fsanitize-blacklist...can we do something else
+  # for gcc ?
+  if(NOT Boost_INCLUDE_DIRS AND TARGET Boost::headers)
+    get_target_property(Boost_INCLUDE_DIRS Boost::headers INTERFACE_INCLUDE_DIRECTORIES)
+  endif()
+  message(STATUS "Adding [${Boost_INCLUDE_DIRS}] to sanitizer blacklist")
+  file(WRITE ${CMAKE_CURRENT_BINARY_DIR}/san_bl.txt "src:${Boost_INCLUDE_DIRS}/*")
+  target_compile_options(opts
+    INTERFACE
+      # ignore boost headers for sanitizing
+      -fsanitize-blacklist=${CMAKE_CURRENT_BINARY_DIR}/san_bl.txt)
+endif()

cmake/create_symbolic_link.cmake

@@ -0,0 +1,20 @@
+# file(CREATE_SYMLINK) only works on Windows with administrator privileges.
+# https://stackoverflow.com/a/61244115/618906
+function(create_symbolic_link target link)
+  if(WIN32)
+    if(NOT IS_SYMLINK "${link}")
+      if(NOT IS_ABSOLUTE "${target}")
+        # Relative links work do not work on Windows.
+        set(target "${link}/../${target}")
+      endif()
+      file(TO_NATIVE_PATH "${target}" target)
+      file(TO_NATIVE_PATH "${link}" link)
+      execute_process(COMMAND cmd.exe /c mklink /J "${link}" "${target}")
+    endif()
+  else()
+    file(CREATE_LINK "${target}" "${link}" SYMBOLIC)
+  endif()
+  if(NOT IS_SYMLINK "${link}")
+    message(ERROR "failed to create symlink: <${link}>")
+  endif()
+endfunction()

cmake/deps/Boost.cmake

@@ -1,14 +1,16 @@
 #[===================================================================[
    NIH dep: boost
 #]===================================================================]
-
 if((NOT DEFINED BOOST_ROOT) AND(DEFINED ENV{BOOST_ROOT}))
   set(BOOST_ROOT $ENV{BOOST_ROOT})
 endif()
+if((NOT DEFINED BOOST_LIBRARYDIR) AND(DEFINED ENV{BOOST_LIBRARYDIR}))
+  set(BOOST_LIBRARYDIR $ENV{BOOST_LIBRARYDIR})
+endif()
 file(TO_CMAKE_PATH "${BOOST_ROOT}" BOOST_ROOT)
 if(WIN32 OR CYGWIN)
   # Workaround for MSVC having two boost versions - x86 and x64 on same PC in stage folders
-  if(DEFINED BOOST_ROOT)
+  if((NOT DEFINED BOOST_LIBRARYDIR) AND (DEFINED BOOST_ROOT))
     if(IS_DIRECTORY ${BOOST_ROOT}/stage64/lib)
       set(BOOST_LIBRARYDIR ${BOOST_ROOT}/stage64/lib)
     elseif(IS_DIRECTORY ${BOOST_ROOT}/stage/lib)
@@ -52,9 +54,11 @@ find_package(Boost 1.86 REQUIRED
     coroutine
     date_time
     filesystem
+    json
     program_options
     regex
     system
+    iostreams
     thread)
 
 add_library(ripple_boost INTERFACE)
@@ -74,6 +78,8 @@ target_link_libraries(ripple_boost
     Boost::coroutine
     Boost::date_time
     Boost::filesystem
+    Boost::json
+    Boost::iostreams
     Boost::program_options
     Boost::regex
     Boost::system

cmake/deps/Ed25519-donna.cmake

@@ -3,13 +3,13 @@
 #]===================================================================]
 
 add_library (ed25519-donna STATIC
-  src/ed25519-donna/ed25519.c)
+  external/ed25519-donna/ed25519.c)
 target_include_directories (ed25519-donna
   PUBLIC
-    $<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}/src>
+    $<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}/external>
     $<INSTALL_INTERFACE:include>
   PRIVATE
-    ${CMAKE_CURRENT_SOURCE_DIR}/src/ed25519-donna)
+    ${CMAKE_CURRENT_SOURCE_DIR}/external/ed25519-donna)
 #[=========================================================[
    NOTE for macos:
    https://github.com/floodyberry/ed25519-donna/issues/29
@@ -24,5 +24,5 @@ target_link_libraries (ripple_libs INTERFACE NIH::ed25519-donna)
 #]===========================]
 install (
   FILES
-    src/ed25519-donna/ed25519.h
+    external/ed25519-donna/ed25519.h
   DESTINATION include/ed25519-donna)

cmake/deps/FindBoost.cmake

@@ -248,6 +248,7 @@ include(FindPackageHandleStandardArgs)
 # Save project's policies
 cmake_policy(PUSH)
 cmake_policy(SET CMP0057 NEW) # if IN_LIST
+#cmake_policy(SET CMP0144 NEW)
 
 #-------------------------------------------------------------------------------
 # Before we go searching, check whether a boost cmake package is available, unless
@@ -969,7 +970,24 @@ function(_Boost_COMPONENT_DEPENDENCIES component _ret)
       set(_Boost_WAVE_DEPENDENCIES filesystem serialization thread chrono date_time atomic)
       set(_Boost_WSERIALIZATION_DEPENDENCIES serialization)
     endif()
-    if(NOT Boost_VERSION_STRING VERSION_LESS 1.77.0)
+    
+    # Special handling for Boost 1.86.0 and higher
+    if(NOT Boost_VERSION_STRING VERSION_LESS 1.86.0)
+      # Explicitly set these for Boost 1.86
+      set(_Boost_IOSTREAMS_DEPENDENCIES "")  # No dependencies for iostreams in 1.86
+      
+      # Debug output to help diagnose the issue
+      if(Boost_DEBUG)
+        message(STATUS "Using special dependency settings for Boost 1.86.0+")
+        message(STATUS "Component: ${component}, uppercomponent: ${uppercomponent}")
+        message(STATUS "Boost_VERSION_STRING: ${Boost_VERSION_STRING}")
+        message(STATUS "BOOST_ROOT: $ENV{BOOST_ROOT}")
+        message(STATUS "BOOST_LIBRARYDIR: $ENV{BOOST_LIBRARYDIR}")
+      endif()
+    endif()
+    
+    # Only show warning for versions beyond what we've defined
+    if(NOT Boost_VERSION_STRING VERSION_LESS 1.87.0)
       message(WARNING "New Boost version may have incorrect or missing dependencies and imported targets")
     endif()
   endif()
@@ -1879,6 +1897,18 @@ foreach(COMPONENT ${Boost_FIND_COMPONENTS})
     list(INSERT _boost_LIBRARY_SEARCH_DIRS_RELEASE 0 ${Boost_LIBRARY_DIR_DEBUG})
   endif()
 
+  if(NOT Boost_VERSION_STRING VERSION_LESS 1.86.0)
+    if(BOOST_LIBRARYDIR AND EXISTS "${BOOST_LIBRARYDIR}")
+      # Clear existing search paths and use only BOOST_LIBRARYDIR 
+      set(_boost_LIBRARY_SEARCH_DIRS_RELEASE "${BOOST_LIBRARYDIR}" NO_DEFAULT_PATH)
+      set(_boost_LIBRARY_SEARCH_DIRS_DEBUG "${BOOST_LIBRARYDIR}" NO_DEFAULT_PATH)
+        
+      if(Boost_DEBUG)
+        message(STATUS "Boost 1.86: Setting library search dirs to BOOST_LIBRARYDIR: ${BOOST_LIBRARYDIR}")
+      endif()
+    endif()
+  endif()
+
   # Avoid passing backslashes to _Boost_FIND_LIBRARY due to macro re-parsing.
   string(REPLACE "\\" "/" _boost_LIBRARY_SEARCH_DIRS_tmp "${_boost_LIBRARY_SEARCH_DIRS_RELEASE}")
 

cmake/deps/Nudb.cmake

@@ -6,7 +6,7 @@
    proper targets and export/install
 #]===================================================================]
 
-if (is_root_project) # NuDB not needed in the case of xrpl_core inclusion build
+if (is_root_project) # NuDB not needed in the case of xrpl.libpb inclusion build
   add_library (nudb INTERFACE)
   FetchContent_Declare(
     nudb_src

cmake/deps/Protobuf.cmake

@@ -129,27 +129,28 @@ else ()
   endif ()
 endif ()
 
-file (MAKE_DIRECTORY ${CMAKE_BINARY_DIR}/proto_gen)
-set (save_CBD ${CMAKE_CURRENT_BINARY_DIR})
-set (CMAKE_CURRENT_BINARY_DIR ${CMAKE_BINARY_DIR}/proto_gen)
-protobuf_generate_cpp (
-  PROTO_SRCS
-  PROTO_HDRS
-  src/ripple/proto/ripple.proto)
-set (CMAKE_CURRENT_BINARY_DIR ${save_CBD})
+set(output_dir ${CMAKE_BINARY_DIR}/proto_gen)
+file(MAKE_DIRECTORY ${output_dir})
+set(ccbd ${CMAKE_CURRENT_BINARY_DIR})
+set(CMAKE_CURRENT_BINARY_DIR ${output_dir})
+protobuf_generate_cpp(PROTO_SRCS PROTO_HDRS src/ripple/proto/ripple.proto)
+set(CMAKE_CURRENT_BINARY_DIR ${ccbd})
 
-add_library (pbufs STATIC ${PROTO_SRCS} ${PROTO_HDRS})
-
-target_include_directories (pbufs PRIVATE src)
-target_include_directories (pbufs
-  SYSTEM PUBLIC ${CMAKE_BINARY_DIR}/proto_gen)
-target_link_libraries (pbufs protobuf::libprotobuf)
-target_compile_options (pbufs
+target_include_directories(xrpl.libpb SYSTEM PUBLIC
+    # The generated implementation imports the header relative to the output
+    # directory.
+    $<BUILD_INTERFACE:${output_dir}>
+    $<BUILD_INTERFACE:${output_dir}/src>
+)
+target_sources(xrpl.libpb PRIVATE ${output_dir}/src/ripple/proto/ripple.pb.cc)
+install(
+  FILES ${output_dir}/src/ripple/proto/ripple.pb.h
+  DESTINATION include/ripple/proto)
+target_link_libraries(xrpl.libpb PUBLIC protobuf::libprotobuf)
+target_compile_options(xrpl.libpb
   PUBLIC
     $<$<BOOL:${is_xcode}>:
       --system-header-prefix="google/protobuf"
       -Wno-deprecated-dynamic-exception-spec
-    >)
-add_library (Ripple::pbufs ALIAS pbufs)
-target_link_libraries (ripple_libs INTERFACE Ripple::pbufs)
-exclude_if_included (pbufs)
+    >
+)

cmake/deps/Rocksdb.cmake

@@ -64,13 +64,13 @@ if (local_rocksdb)
     PATCH_COMMAND
       # only used by windows build
       ${CMAKE_COMMAND} -E copy_if_different
-      ${CMAKE_CURRENT_SOURCE_DIR}/Builds/CMake/rocks_thirdparty.inc
+      ${CMAKE_CURRENT_SOURCE_DIR}/cmake/rocks_thirdparty.inc
       <SOURCE_DIR>/thirdparty.inc
     COMMAND
       # fixup their build version file to keep the values
       # from changing always
       ${CMAKE_COMMAND} -E copy_if_different
-      ${CMAKE_CURRENT_SOURCE_DIR}/Builds/CMake/rocksdb_build_version.cc.in
+      ${CMAKE_CURRENT_SOURCE_DIR}/cmake/rocksdb_build_version.cc.in
       <SOURCE_DIR>/util/build_version.cc.in
     CMAKE_ARGS
       -DCMAKE_CXX_COMPILER=${CMAKE_CXX_COMPILER}

cmake/deps/Secp256k1.cmake

@@ -24,7 +24,7 @@ else()
   set(INSTALL_SECP256K1 true)
 
   add_library (secp256k1 STATIC
-    src/secp256k1/src/secp256k1.c)
+    external/secp256k1/src/secp256k1.c)
   target_compile_definitions (secp256k1
     PRIVATE
       USE_NUM_NONE
@@ -34,9 +34,9 @@ else()
       USE_SCALAR_INV_BUILTIN)
   target_include_directories (secp256k1
     PUBLIC
-      $<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}/src>
+      $<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}/external>
       $<INSTALL_INTERFACE:include>
-    PRIVATE ${CMAKE_CURRENT_SOURCE_DIR}/src/secp256k1)
+    PRIVATE ${CMAKE_CURRENT_SOURCE_DIR}/external/secp256k1)
   target_compile_options (secp256k1
     PRIVATE
       $<$<BOOL:${MSVC}>:-wd4319>
@@ -51,7 +51,7 @@ else()
 #]===========================]
   install (
     FILES
-      src/secp256k1/include/secp256k1.h
+      external/secp256k1/include/secp256k1.h
   DESTINATION include/secp256k1/include)
 
   add_library (NIH::secp256k1 ALIAS secp256k1)

cmake/deps/Soci.cmake

@@ -52,7 +52,7 @@ else()
     # whenever we update the GIT_TAG above.
     PATCH_COMMAND
       ${CMAKE_COMMAND} -D RIPPLED_SOURCE=${CMAKE_CURRENT_SOURCE_DIR}
-        -P ${CMAKE_CURRENT_SOURCE_DIR}/Builds/CMake/soci_patch.cmake
+        -P ${CMAKE_CURRENT_SOURCE_DIR}/cmake/soci_patch.cmake
     CMAKE_ARGS
       -DCMAKE_CXX_COMPILER=${CMAKE_CXX_COMPILER}
       -DCMAKE_C_COMPILER=${CMAKE_C_COMPILER}
@@ -61,7 +61,7 @@ else()
       $<$<BOOL:${VCPKG_TARGET_TRIPLET}>:-DVCPKG_TARGET_TRIPLET=${VCPKG_TARGET_TRIPLET}>
       $<$<BOOL:${unity}>:-DCMAKE_UNITY_BUILD=ON}>
       -DCMAKE_PREFIX_PATH=${CMAKE_BINARY_DIR}/sqlite3
-      -DCMAKE_MODULE_PATH=${CMAKE_CURRENT_SOURCE_DIR}/Builds/CMake
+      -DCMAKE_MODULE_PATH=${CMAKE_CURRENT_SOURCE_DIR}/cmake
       -DCMAKE_INCLUDE_PATH=$<JOIN:$<TARGET_PROPERTY:sqlite,INTERFACE_INCLUDE_DIRECTORIES>,::>
       -DCMAKE_LIBRARY_PATH=${sqlite_BINARY_DIR}
       -DCMAKE_DEBUG_POSTFIX=_d

cmake/deps/Sqlite.cmake

@@ -37,7 +37,7 @@ else()
     # for the single amalgamation source file.
     PATCH_COMMAND
       ${CMAKE_COMMAND} -E copy_if_different
-      ${CMAKE_CURRENT_SOURCE_DIR}/Builds/CMake/CMake_sqlite3.txt
+      ${CMAKE_CURRENT_SOURCE_DIR}/cmake/CMake_sqlite3.txt
       <SOURCE_DIR>/CMakeLists.txt
     CMAKE_ARGS
       -DCMAKE_CXX_COMPILER=${CMAKE_CXX_COMPILER}

cmake/deps/WasmEdge.cmake

@@ -81,4 +81,4 @@ if(XAR_LIBRARY)
 else()
   message(WARNING "xar library not found... (only important for mac builds)")
 endif()
-add_library (NIH::WasmEdge ALIAS wasmedge)
+add_library (wasmedge::wasmedge ALIAS wasmedge)

cmake/deps/gRPC.cmake

@@ -74,7 +74,11 @@ else ()
       if (NOT _location)
         message (FATAL_ERROR "using pkg-config for grpc, can't find c-ares")
       endif ()
-      add_library (c-ares::cares ${_static} IMPORTED GLOBAL)
+      if(${_location} MATCHES "\\.a$")
+        add_library(c-ares::cares STATIC IMPORTED GLOBAL)
+      else()
+        add_library(c-ares::cares SHARED IMPORTED GLOBAL)
+      endif()      
       set_target_properties (c-ares::cares PROPERTIES
         IMPORTED_LOCATION ${_location}
         INTERFACE_INCLUDE_DIRECTORIES "${${_prefix}_INCLUDE_DIRS}"
@@ -204,6 +208,7 @@ else ()
       CMAKE_ARGS
         -DCMAKE_CXX_COMPILER=${CMAKE_CXX_COMPILER}
         -DCMAKE_C_COMPILER=${CMAKE_C_COMPILER}
+        -DCMAKE_CXX_STANDARD=17
         $<$<BOOL:${CMAKE_VERBOSE_MAKEFILE}>:-DCMAKE_VERBOSE_MAKEFILE=ON>
         $<$<BOOL:${CMAKE_TOOLCHAIN_FILE}>:-DCMAKE_TOOLCHAIN_FILE=${CMAKE_TOOLCHAIN_FILE}>
         $<$<BOOL:${VCPKG_TARGET_TRIPLET}>:-DVCPKG_TARGET_TRIPLET=${VCPKG_TARGET_TRIPLET}>
@@ -309,25 +314,33 @@ endif ()
    grpc defs and bundle into a
    static lib
 #]=================================]
-set (GRPC_GEN_DIR "${CMAKE_BINARY_DIR}/proto_gen_grpc")
-file (MAKE_DIRECTORY ${GRPC_GEN_DIR})
-set (GRPC_PROTO_SRCS)
-set (GRPC_PROTO_HDRS)
-set (GRPC_PROTO_ROOT "${CMAKE_CURRENT_SOURCE_DIR}/src/ripple/proto/org")
-file(GLOB_RECURSE GRPC_DEFINITION_FILES LIST_DIRECTORIES false "${GRPC_PROTO_ROOT}/*.proto")
+set(output_dir "${CMAKE_BINARY_DIR}/proto_gen_grpc")
+set(GRPC_GEN_DIR "${output_dir}/ripple/proto")
+file(MAKE_DIRECTORY ${GRPC_GEN_DIR})
+set(GRPC_PROTO_SRCS)
+set(GRPC_PROTO_HDRS)
+set(GRPC_PROTO_ROOT "${CMAKE_CURRENT_SOURCE_DIR}/src/ripple/proto/org")
+file(GLOB_RECURSE GRPC_DEFINITION_FILES "${GRPC_PROTO_ROOT}/*.proto")
 foreach(file ${GRPC_DEFINITION_FILES})
+  # /home/user/rippled/src/ripple/proto/org/.../v1/get_ledger.proto
   get_filename_component(_abs_file ${file} ABSOLUTE)
+  # /home/user/rippled/src/ripple/proto/org/.../v1
   get_filename_component(_abs_dir ${_abs_file} DIRECTORY)
+  # get_ledger
   get_filename_component(_basename ${file} NAME_WE)
+  # /home/user/rippled/src/ripple/proto
   get_filename_component(_proto_inc ${GRPC_PROTO_ROOT} DIRECTORY) # updir one level
+  # org/.../v1/get_ledger.proto
   file(RELATIVE_PATH _rel_root_file ${_proto_inc} ${_abs_file})
+  # org/.../v1
   get_filename_component(_rel_root_dir ${_rel_root_file} DIRECTORY)
+  # src/ripple/proto/org/.../v1
   file(RELATIVE_PATH _rel_dir ${CMAKE_CURRENT_SOURCE_DIR} ${_abs_dir})
 
-  set (src_1 "${GRPC_GEN_DIR}/${_rel_root_dir}/${_basename}.grpc.pb.cc")
-  set (src_2 "${GRPC_GEN_DIR}/${_rel_root_dir}/${_basename}.pb.cc")
-  set (hdr_1 "${GRPC_GEN_DIR}/${_rel_root_dir}/${_basename}.grpc.pb.h")
-  set (hdr_2 "${GRPC_GEN_DIR}/${_rel_root_dir}/${_basename}.pb.h")
+  set(src_1 "${GRPC_GEN_DIR}/${_rel_root_dir}/${_basename}.grpc.pb.cc")
+  set(src_2 "${GRPC_GEN_DIR}/${_rel_root_dir}/${_basename}.pb.cc")
+  set(hdr_1 "${GRPC_GEN_DIR}/${_rel_root_dir}/${_basename}.grpc.pb.h")
+  set(hdr_2 "${GRPC_GEN_DIR}/${_rel_root_dir}/${_basename}.pb.h")
   add_custom_command(
     OUTPUT ${src_1} ${src_2} ${hdr_1} ${hdr_2}
     COMMAND protobuf::protoc
@@ -340,16 +353,32 @@ foreach(file ${GRPC_DEFINITION_FILES})
     WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
     COMMENT "Running gRPC C++ protocol buffer compiler on ${file}"
     VERBATIM)
-    set_source_files_properties(${src_1} ${src_2} ${hdr_1} ${hdr_2} PROPERTIES GENERATED TRUE)
+    set_source_files_properties(${src_1} ${src_2} ${hdr_1} ${hdr_2} PROPERTIES
+      GENERATED TRUE
+      SKIP_UNITY_BUILD_INCLUSION ON
+    )
     list(APPEND GRPC_PROTO_SRCS ${src_1} ${src_2})
     list(APPEND GRPC_PROTO_HDRS ${hdr_1} ${hdr_2})
 endforeach()
 
-add_library (grpc_pbufs STATIC ${GRPC_PROTO_SRCS} ${GRPC_PROTO_HDRS})
-#target_include_directories (grpc_pbufs PRIVATE src)
-target_include_directories (grpc_pbufs SYSTEM PUBLIC ${GRPC_GEN_DIR})
-target_link_libraries (grpc_pbufs protobuf::libprotobuf "gRPC::grpc++${grpc_suffix}")
-target_compile_options (grpc_pbufs
+target_include_directories(xrpl.libpb SYSTEM PUBLIC
+  $<BUILD_INTERFACE:${output_dir}>
+  $<BUILD_INTERFACE:${output_dir}/ripple/proto>
+  # The generated sources include headers relative to this path. Fix it later.
+  $<INSTALL_INTERFACE:include/ripple/proto>
+)
+target_sources(xrpl.libpb PRIVATE ${GRPC_PROTO_SRCS})
+install(
+  DIRECTORY ${output_dir}/ripple
+  DESTINATION include/
+  FILES_MATCHING PATTERN "*.h"
+)
+target_link_libraries(xrpl.libpb PUBLIC
+  "gRPC::grpc++"
+  # libgrpc is missing references.
+  absl::random_random
+)
+target_compile_options(xrpl.libpb
   PRIVATE
     $<$<BOOL:${MSVC}>:-wd4065>
     $<$<NOT:$<BOOL:${MSVC}>>:-Wno-deprecated-declarations>
@@ -359,6 +388,5 @@ target_compile_options (grpc_pbufs
       --system-header-prefix="google/protobuf"
       -Wno-deprecated-dynamic-exception-spec
     >)
-add_library (Ripple::grpc_pbufs ALIAS grpc_pbufs)
-target_link_libraries (ripple_libs INTERFACE Ripple::grpc_pbufs)
-exclude_if_included (grpc_pbufs)
+# target_link_libraries (ripple_libs INTERFACE Ripple::grpc_pbufs)
+# exclude_if_included (grpc_pbufs)

cmake/isolate_headers.cmake

@@ -0,0 +1,48 @@
+include(create_symbolic_link)
+
+# Consider include directory B nested under prefix A:
+#
+#     /path/to/A/then/to/B/...
+#
+# Call C the relative path from A to B.
+# C is what we want to write in `#include` directives:
+#
+#     #include <then/to/B/...>
+#
+# Examples, all from the `jobqueue` module:
+#
+#   - Library public headers:
+#     B = /include/xrpl/jobqueue
+#     A = /include/
+#     C = xrpl/jobqueue
+#
+#   - Library private headers:
+#     B = /src/libxrpl/jobqueue
+#     A = /src/
+#     C = libxrpl/jobqueue
+#
+#   - Test private headers:
+#     B = /tests/jobqueue
+#     A = /
+#     C = tests/jobqueue
+#
+# To isolate headers from each other,
+# we want to create a symlink Y that points to B,
+# within a subdirectory X of the `CMAKE_BINARY_DIR`,
+# that has the same relative path C between X and Y,
+# and then add X as an include directory of the target,
+# sometimes `PUBLIC` and sometimes `PRIVATE`.
+# The Cs are all guaranteed to be unique.
+# We can guarantee a unique X per target by using
+# `${CMAKE_CURRENT_BINARY_DIR}/include/${target}`.
+#
+# isolate_headers(target A B scope)
+function(isolate_headers target A B scope)
+  file(RELATIVE_PATH C "${A}" "${B}")
+  set(X "${CMAKE_CURRENT_BINARY_DIR}/modules/${target}")
+  set(Y "${X}/${C}")
+  cmake_path(GET Y PARENT_PATH parent)
+  file(MAKE_DIRECTORY "${parent}")
+  create_symbolic_link("${B}" "${Y}")
+  target_include_directories(${target} ${scope} "$<BUILD_INTERFACE:${X}>")
+endfunction()

cmake/soci_patch.cmake

@@ -8,7 +8,7 @@
 # those warnings.
 if (RIPPLED_SOURCE)
   execute_process( COMMAND ${CMAKE_COMMAND} -E copy_if_different
-      ${RIPPLED_SOURCE}/Builds/CMake/SociConfig.cmake.patched
+      ${RIPPLED_SOURCE}/cmake/SociConfig.cmake.patched
       cmake/SociConfig.cmake )
 endif ()
 

cmake/target_link_modules.cmake

@@ -0,0 +1,24 @@
+# Link a library to its modules (see: `add_module`)
+# and remove the module sources from the library's sources.
+#
+# add_module(parent a)
+# add_module(parent b)
+# target_link_libraries(project.libparent.b PUBLIC project.libparent.a)
+# add_library(project.libparent)
+# target_link_modules(parent PUBLIC a b)
+function(target_link_modules parent scope)
+  set(library ${PROJECT_NAME}.lib${parent})
+  foreach(name ${ARGN})
+    set(module ${library}.${name})
+    get_target_property(sources ${library} SOURCES)
+    list(LENGTH sources before)
+    get_target_property(dupes ${module} SOURCES)
+    list(LENGTH dupes expected)
+    list(REMOVE_ITEM sources ${dupes})
+    list(LENGTH sources after)
+    math(EXPR actual "${before} - ${after}")
+    message(STATUS "${module} with ${expected} sources took ${actual} sources from ${library}")
+    set_target_properties(${library} PROPERTIES SOURCES "${sources}")
+    target_link_libraries(${library} ${scope} ${module})
+  endforeach()
+endfunction()

cmake/target_protobuf_sources.cmake

@@ -0,0 +1,62 @@
+find_package(Protobuf REQUIRED)
+
+# .proto files import each other like this:
+#
+# import "path/to/file.proto";
+#
+# For the protobuf compiler to find these imports,
+# the parent directory of "path" must be in the import path.
+#
+# When generating C++,
+# it turns into an include statement like this:
+#
+# #include "path/to/file.pb.h"
+#
+# and the header is generated at a path relative to the output directory
+# that matches the given .proto path relative to the source directory
+# minus the first matching prefix on the import path.
+#
+# In other words, a file `include/package/path/to/file.proto`
+# with import path [`include/package`, `include`]
+# will generate files `output/path/to/file.pb.{h,cc}`
+# with includes like `#include "path/to/file.pb.h".
+#
+# During build, the generated files can find each other if the output
+# directory is an include directory, but we want to install that directory
+# under our package's include directory (`include/package`), not as a sibling.
+# After install, they can find each other if that subdirectory is an include
+# directory.
+
+# Add protocol buffer sources to an existing library target.
+# target:
+#     The name of the library target.
+# prefix:
+#     The install prefix for headers relative to `CMAKE_INSTALL_INCLUDEDIR`.
+#     This prefix should appear at the start of all your consumer includes.
+# ARGN:
+#     A list of .proto files.
+function(target_protobuf_sources target prefix)
+  set(dir "${CMAKE_CURRENT_BINARY_DIR}/pb-${target}")
+  file(MAKE_DIRECTORY "${dir}/${prefix}")
+
+  protobuf_generate(
+    TARGET ${target}
+    PROTOC_OUT_DIR "${dir}/${prefix}"
+    "${ARGN}"
+  )
+  target_include_directories(${target} SYSTEM PUBLIC
+    # Allows #include <package/path/to/file.proto> used by consumer files.
+    $<BUILD_INTERFACE:${dir}>
+    # Allows #include "path/to/file.proto" used by generated files.
+    $<BUILD_INTERFACE:${dir}/${prefix}>
+    # Allows #include <package/path/to/file.proto> used by consumer files.
+    $<INSTALL_INTERFACE:${CMAKE_INSTALL_INCLUDEDIR}>
+    # Allows #include "path/to/file.proto" used by generated files.
+    $<INSTALL_INTERFACE:${CMAKE_INSTALL_INCLUDEDIR}/${prefix}>
+  )
+  install(
+    DIRECTORY ${dir}/
+    DESTINATION ${CMAKE_INSTALL_INCLUDEDIR}
+    FILES_MATCHING PATTERN "*.h"
+  )
+endfunction()

conanfile.py

@@ -0,0 +1,179 @@
+from conan import ConanFile
+from conan.tools.cmake import CMake, CMakeToolchain, cmake_layout
+import re
+
+class Xrpl(ConanFile):
+    name = 'xrpl'
+
+    license = 'ISC'
+    author = 'John Freeman <jfreeman@ripple.com>'
+    url = 'https://github.com/xrplf/rippled'
+    description = 'The XRP Ledger'
+    settings = 'os', 'compiler', 'build_type', 'arch'
+    options = {
+        'assertions': [True, False],
+        'coverage': [True, False],
+        'fPIC': [True, False],
+        'jemalloc': [True, False],
+        'rocksdb': [True, False],
+        'shared': [True, False],
+        'static': [True, False],
+        'tests': [True, False],
+        'unity': [True, False],
+        'xrpld': [True, False],
+    }
+
+    requires = [
+        'date/3.0.3',
+        'grpc/1.50.1',
+        'libarchive/3.7.6',
+        'nudb/2.0.8',
+        'openssl/1.1.1v',
+        'soci/4.0.3',
+        'xxhash/0.8.2',
+        'wasmedge/0.11.2',
+        'zlib/1.3.1',
+    ]
+
+    tool_requires = [
+        'protobuf/3.21.9',
+    ]
+
+    default_options = {
+        'assertions': False,
+        'coverage': False,
+        'fPIC': True,
+        'jemalloc': False,
+        'rocksdb': True,
+        'shared': False,
+        'static': True,
+        'tests': False,
+        'unity': False,
+        'xrpld': False,
+
+        'date/*:header_only': True,
+        'grpc/*:shared': False,
+        'grpc/*:secure': True,
+        'libarchive/*:shared': False,
+        'libarchive/*:with_acl': False,
+        'libarchive/*:with_bzip2': False,
+        'libarchive/*:with_cng': False,
+        'libarchive/*:with_expat': False,
+        'libarchive/*:with_iconv': False,
+        'libarchive/*:with_libxml2': False,
+        'libarchive/*:with_lz4': True,
+        'libarchive/*:with_lzma': False,
+        'libarchive/*:with_lzo': False,
+        'libarchive/*:with_nettle': False,
+        'libarchive/*:with_openssl': False,
+        'libarchive/*:with_pcreposix': False,
+        'libarchive/*:with_xattr': False,
+        'libarchive/*:with_zlib': False,
+        'lz4/*:shared': False,
+        'openssl/*:shared': False,
+        'protobuf/*:shared': False,
+        'protobuf/*:with_zlib': True,
+        'rocksdb/*:enable_sse': False,
+        'rocksdb/*:lite': False,
+        'rocksdb/*:shared': False,
+        'rocksdb/*:use_rtti': True,
+        'rocksdb/*:with_jemalloc': False,
+        'rocksdb/*:with_lz4': True,
+        'rocksdb/*:with_snappy': True,
+        'snappy/*:shared': False,
+        'soci/*:shared': False,
+        'soci/*:with_sqlite3': True,
+        'soci/*:with_boost': True,
+        'xxhash/*:shared': False,
+    }
+
+    def set_version(self):
+        path = f'{self.recipe_folder}/src/libxrpl/protocol/BuildInfo.cpp'
+        regex = r'versionString\s?=\s?\"(.*)\"'
+        with open(path, 'r') as file:
+            matches = (re.search(regex, line) for line in file)
+            match = next(m for m in matches if m)
+            self.version = match.group(1)
+
+    def configure(self):
+        if self.settings.compiler == 'apple-clang':
+            self.options['boost'].visibility = 'global'
+
+    def requirements(self):
+        self.requires('boost/1.86.0', force=True)
+        self.requires('lz4/1.10.0', force=True)
+        self.requires('protobuf/3.21.9', force=True)
+        self.requires('sqlite3/3.47.0', force=True)
+        if self.options.jemalloc:
+            self.requires('jemalloc/5.3.0')
+        if self.options.rocksdb:
+            self.requires('rocksdb/6.29.5')
+
+    exports_sources = (
+        'CMakeLists.txt',
+        'bin/getRippledInfo',
+        'cfg/*',
+        'cmake/*',
+        'external/*',
+        'include/*',
+        'src/*',
+    )
+
+    def layout(self):
+        cmake_layout(self)
+        # Fix this setting to follow the default introduced in Conan 1.48
+        # to align with our build instructions.
+        self.folders.generators = 'build/generators'
+
+    generators = 'CMakeDeps'
+    def generate(self):
+        tc = CMakeToolchain(self)
+        tc.variables['tests'] = self.options.tests
+        tc.variables['assert'] = self.options.assertions
+        tc.variables['coverage'] = self.options.coverage
+        tc.variables['jemalloc'] = self.options.jemalloc
+        tc.variables['rocksdb'] = self.options.rocksdb
+        tc.variables['BUILD_SHARED_LIBS'] = self.options.shared
+        tc.variables['static'] = self.options.static
+        tc.variables['unity'] = self.options.unity
+        tc.variables['xrpld'] = self.options.xrpld
+        tc.generate()
+
+    def build(self):
+        cmake = CMake(self)
+        cmake.verbose = True
+        cmake.configure()
+        cmake.build()
+
+    def package(self):
+        cmake = CMake(self)
+        cmake.verbose = True
+        cmake.install()
+
+    def package_info(self):
+        libxrpl = self.cpp_info.components['libxrpl']
+        libxrpl.libs = [
+            'xrpl',
+            'xrpl.libpb',
+            'ed25519',
+            'secp256k1',
+        ]
+        # TODO: Fix the protobufs to include each other relative to
+        # `include/`, not `include/ripple/proto/`.
+        libxrpl.includedirs = ['include', 'include/ripple/proto']
+        libxrpl.requires = [
+            'boost::boost',
+            'date::date',
+            'grpc::grpc++',
+            'libarchive::libarchive',
+            'lz4::lz4',
+            'nudb::nudb',
+            'openssl::crypto',
+            'protobuf::libprotobuf',
+            'soci::soci',
+            'sqlite3::sqlite',
+            'xxhash::xxhash',
+            'zlib::zlib',
+        ]
+        if self.options.rocksdb:
+            libxrpl.requires.append('rocksdb::librocksdb')

docker-unit-tests.sh

@@ -1,4 +1,11 @@
-#!/bin/bash
+#!/bin/bash -x
 
-docker run --rm -i -v $(pwd):/io ubuntu sh -c '/io/release-build/xahaud -u'
+BUILD_CORES=$(echo "scale=0 ; `nproc` / 1.337" | bc)
 
+if [[ "$GITHUB_REPOSITORY" == "" ]]; then
+  #Default
+  BUILD_CORES=8
+fi
+
+echo "Mounting $(pwd)/io in ubuntu and running unit tests"
+docker run --rm -i -v $(pwd):/io -e BUILD_CORES=$BUILD_CORES ubuntu sh -c '/io/release-build/xahaud --unittest-jobs $BUILD_CORES -u'

docs/build/environment.md

@@ -0,0 +1,84 @@
+Our [build instructions][BUILD.md] assume you have a C++ development
+environment complete with Git, Python, Conan, CMake, and a C++ compiler.
+This document exists to help readers set one up on any of the Big Three
+platforms: Linux, macOS, or Windows.
+
+[BUILD.md]: ../../BUILD.md
+
+
+## Linux
+
+Package ecosystems vary across Linux distributions,
+so there is no one set of instructions that will work for every Linux user.
+These instructions are written for Ubuntu 22.04.
+They are largely copied from the [script][1] used to configure our Docker
+container for continuous integration.
+That script handles many more responsibilities.
+These instructions are just the bare minimum to build one configuration of
+rippled.
+You can check that codebase for other Linux distributions and versions.
+If you cannot find yours there,
+then we hope that these instructions can at least guide you in the right
+direction.
+
+```
+apt update
+apt install --yes curl git libssl-dev python3.10-dev python3-pip make g++-11 libprotobuf-dev protobuf-compiler
+
+curl --location --remote-name \
+  "https://github.com/Kitware/CMake/releases/download/v3.25.1/cmake-3.25.1.tar.gz"
+tar -xzf cmake-3.25.1.tar.gz
+rm cmake-3.25.1.tar.gz
+cd cmake-3.25.1
+./bootstrap --parallel=$(nproc)
+make --jobs $(nproc)
+make install
+cd ..
+
+pip3 install 'conan<2'
+```
+
+[1]: https://github.com/thejohnfreeman/rippled-docker/blob/master/ubuntu-22.04/install.sh
+
+
+## macOS
+
+Open a Terminal and enter the below command to bring up a dialog to install
+the command line developer tools.
+Once it is finished, this command should return a version greater than the
+minimum required (see [BUILD.md][]).
+
+```
+clang --version
+```
+
+The command line developer tools should include Git too:
+
+```
+git --version
+```
+
+Install [Homebrew][],
+use it to install [pyenv][],
+use it to install Python,
+and use it to install Conan:
+
+[Homebrew]: https://brew.sh/
+[pyenv]: https://github.com/pyenv/pyenv
+
+```
+/bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)"
+brew update
+brew install xz
+brew install pyenv
+pyenv install 3.10-dev
+pyenv global 3.10-dev
+eval "$(pyenv init -)"
+pip install 'conan<2'
+```
+
+Install CMake with Homebrew too:
+
+```
+brew install cmake
+```

docs/build/install.md

@@ -0,0 +1,159 @@
+This document contains instructions for installing rippled.
+The APT package manager is common on Debian-based Linux distributions like
+Ubuntu,
+while the YUM package manager is common on Red Hat-based Linux distributions
+like CentOS.
+Installing from source is an option for all platforms,
+and the only supported option for installing custom builds.
+
+
+## From source
+
+From a source build, you can install rippled and libxrpl using CMake's
+`--install` mode:
+
+```
+cmake --install . --prefix /opt/local
+```
+
+The default [prefix][1] is typically `/usr/local` on Linux and macOS and
+`C:/Program Files/rippled` on Windows.
+
+[1]: https://cmake.org/cmake/help/latest/variable/CMAKE_INSTALL_PREFIX.html
+
+
+## With the APT package manager
+
+1. Update repositories:
+
+        sudo apt update -y
+
+2. Install utilities:
+
+        sudo apt install -y apt-transport-https ca-certificates wget gnupg
+
+3. Add Ripple's package-signing GPG key to your list of trusted keys:
+
+        sudo mkdir /usr/local/share/keyrings/
+        wget -q -O - "https://repos.ripple.com/repos/api/gpg/key/public" | gpg --dearmor > ripple-key.gpg
+        sudo mv ripple-key.gpg /usr/local/share/keyrings
+
+
+4. Check the fingerprint of the newly-added key:
+
+        gpg /usr/local/share/keyrings/ripple-key.gpg
+
+    The output should include an entry for Ripple such as the following:
+
+        gpg: WARNING: no command supplied.  Trying to guess what you mean ...
+        pub   rsa3072 2019-02-14 [SC] [expires: 2026-02-17]
+            C0010EC205B35A3310DC90DE395F97FFCCAFD9A2
+        uid           TechOps Team at Ripple <techops+rippled@ripple.com>
+        sub   rsa3072 2019-02-14 [E] [expires: 2026-02-17]
+
+
+    In particular, make sure that the fingerprint matches. (In the above example, the fingerprint is on the third line, starting with `C001`.)
+
+4. Add the appropriate Ripple repository for your operating system version:
+
+        echo "deb [signed-by=/usr/local/share/keyrings/ripple-key.gpg] https://repos.ripple.com/repos/rippled-deb focal stable" | \
+            sudo tee -a /etc/apt/sources.list.d/ripple.list
+
+    The above example is appropriate for **Ubuntu 20.04 Focal Fossa**. For other operating systems, replace the word `focal` with one of the following:
+
+    - `jammy` for **Ubuntu 22.04 Jammy Jellyfish**
+    - `bionic` for **Ubuntu 18.04 Bionic Beaver**
+    - `bullseye` for **Debian 11 Bullseye**
+    - `buster` for **Debian 10 Buster**
+
+    If you want access to development or pre-release versions of `rippled`, use one of the following instead of `stable`:
+
+    - `unstable` - Pre-release builds ([`release` branch](https://github.com/ripple/rippled/tree/release))
+    - `nightly` - Experimental/development builds ([`develop` branch](https://github.com/ripple/rippled/tree/develop))
+
+    **Warning:** Unstable and nightly builds may be broken at any time. Do not use these builds for production servers.
+
+5. Fetch the Ripple repository.
+
+        sudo apt -y update
+
+6. Install the `rippled` software package:
+
+        sudo apt -y install rippled
+
+7. Check the status of the `rippled` service:
+
+        systemctl status rippled.service
+
+    The `rippled` service should start automatically. If not, you can start it manually:
+
+        sudo systemctl start rippled.service
+
+8. Optional: allow `rippled` to bind to privileged ports.
+
+    This allows you to serve incoming API requests on port 80 or 443. (If you want to do so, you must also update the config file's port settings.)
+
+        sudo setcap 'cap_net_bind_service=+ep' /opt/ripple/bin/rippled
+
+
+## With the YUM package manager
+
+1. Install the Ripple RPM repository:
+
+    Choose the appropriate RPM repository for the stability of releases you want:
+
+    - `stable` for the latest production release (`master` branch)
+    - `unstable` for pre-release builds (`release` branch)
+    - `nightly` for experimental/development builds (`develop` branch)
+
+    *Stable*
+
+        cat << REPOFILE | sudo tee /etc/yum.repos.d/ripple.repo
+        [ripple-stable]
+        name=XRP Ledger Packages
+        enabled=1
+        gpgcheck=0
+        repo_gpgcheck=1
+        baseurl=https://repos.ripple.com/repos/rippled-rpm/stable/
+        gpgkey=https://repos.ripple.com/repos/rippled-rpm/stable/repodata/repomd.xml.key
+        REPOFILE
+
+    *Unstable*
+
+        cat << REPOFILE | sudo tee /etc/yum.repos.d/ripple.repo
+        [ripple-unstable]
+        name=XRP Ledger Packages
+        enabled=1
+        gpgcheck=0
+        repo_gpgcheck=1
+        baseurl=https://repos.ripple.com/repos/rippled-rpm/unstable/
+        gpgkey=https://repos.ripple.com/repos/rippled-rpm/unstable/repodata/repomd.xml.key
+        REPOFILE
+
+    *Nightly*
+
+        cat << REPOFILE | sudo tee /etc/yum.repos.d/ripple.repo
+        [ripple-nightly]
+        name=XRP Ledger Packages
+        enabled=1
+        gpgcheck=0
+        repo_gpgcheck=1
+        baseurl=https://repos.ripple.com/repos/rippled-rpm/nightly/
+        gpgkey=https://repos.ripple.com/repos/rippled-rpm/nightly/repodata/repomd.xml.key
+        REPOFILE
+
+2. Fetch the latest repo updates:
+
+        sudo yum -y update
+
+3. Install the new `rippled` package:
+
+        sudo yum install -y rippled
+
+4. Configure the `rippled` service to start on boot:
+
+        sudo systemctl enable rippled.service
+
+5. Start the `rippled` service:
+
+        sudo systemctl start rippled.service

examples/example/CMakeLists.txt

@@ -0,0 +1,16 @@
+cmake_minimum_required(VERSION 3.21)
+
+set(name example)
+set(version 0.1.0)
+
+project(
+  ${name}
+  VERSION ${version}
+  LANGUAGES CXX
+)
+
+find_package(xrpl REQUIRED)
+
+add_executable(example)
+target_sources(example PRIVATE src/example.cpp)
+target_link_libraries(example PRIVATE xrpl::libxrpl)

examples/example/conanfile.py

@@ -0,0 +1,59 @@
+from conan import ConanFile, conan_version
+from conan.tools.cmake import CMake, cmake_layout
+
+class Example(ConanFile):
+
+    def set_name(self):
+        if self.name is None:
+            self.name = 'example'
+
+    def set_version(self):
+        if self.version is None:
+            self.version = '0.1.0'
+
+    license = 'ISC'
+    author = 'John Freeman <jfreeman08@gmail.com>'
+
+    settings = 'os', 'compiler', 'build_type', 'arch'
+    options = {'shared': [True, False], 'fPIC': [True, False]}
+    default_options = {
+        'shared': False,
+        'fPIC': True,
+        'xrpl:xrpld': False,
+    }
+
+    requires = ['xrpl/2.2.0-rc1@jfreeman/nodestore']
+    generators = ['CMakeDeps', 'CMakeToolchain']
+
+    exports_sources = [
+        'CMakeLists.txt',
+        'cmake/*',
+        'external/*',
+        'include/*',
+        'src/*',
+    ]
+
+    # For out-of-source build.
+    # https://docs.conan.io/en/latest/reference/build_helpers/cmake.html#configure
+    no_copy_source = True
+
+    def layout(self):
+        cmake_layout(self)
+
+    def config_options(self):
+        if self.settings.os == 'Windows':
+            del self.options.fPIC
+
+    def build(self):
+        cmake = CMake(self)
+        cmake.configure(variables={'BUILD_TESTING': 'NO'})
+        cmake.build()
+
+    def package(self):
+        cmake = CMake(self)
+        cmake.install()
+
+    def package_info(self):
+        path = f'{self.package_folder}/share/{self.name}/cpp_info.py'
+        with open(path, 'r') as file:
+            exec(file.read(), {}, {'self': self.cpp_info})

examples/example/src/example.cpp

@@ -0,0 +1,8 @@
+#include <cstdio>
+
+#include <xrpl/protocol/BuildInfo.h>
+
+int main(int argc, char const** argv) {
+    std::printf("%s\n", ripple::BuildInfo::getVersionString().c_str());
+    return 0;
+}

external/README.md

@@ -0,0 +1,12 @@
+The subdirectories in this directory contain either copies or Conan recipes
+of external libraries used by rippled.
+The Conan recipes include patches we have not yet pushed upstream.
+
+| Folder          | Upstream                                     | Description |
+|:----------------|:---------------------------------------------|:------------|
+| `antithesis-sdk`| [Project](https://github.com/antithesishq/antithesis-sdk-cpp/) | [Antithesis](https://antithesis.com/docs/using_antithesis/sdk/cpp/overview.html) SDK for C++ |
+| `ed25519-donna` | [Project](https://github.com/floodyberry/ed25519-donna) | [Ed25519](http://ed25519.cr.yp.to/) digital signatures |
+| `rocksdb`       | [Recipe](https://github.com/conan-io/conan-center-index/tree/master/recipes/rocksdb) | Fast key/value database. (Supports rotational disks better than NuDB.) |
+| `secp256k1`     | [Project](https://github.com/bitcoin-core/secp256k1)    | ECDSA digital signatures using the **secp256k1** curve |
+| `snappy`        | [Recipe](https://github.com/conan-io/conan-center-index/tree/master/recipes/snappy)  | "Snappy" lossless compression algorithm. |
+| `soci`          | [Recipe](https://github.com/conan-io/conan-center-index/tree/master/recipes/soci)    | Abstraction layer for database access. |

external/antithesis-sdk/.clang-format

@@ -0,0 +1,3 @@
+---
+DisableFormat: true
+SortIncludes: false

external/antithesis-sdk/CMakeLists.txt

@@ -0,0 +1,17 @@
+cmake_minimum_required(VERSION 3.25)
+
+# Note, version set explicitly by rippled project
+project(antithesis-sdk-cpp VERSION 0.4.4 LANGUAGES CXX)
+
+add_library(antithesis-sdk-cpp INTERFACE antithesis_sdk.h)
+
+# Note, both sections below created by rippled project
+target_include_directories(antithesis-sdk-cpp INTERFACE
+  $<INSTALL_INTERFACE:${CMAKE_INSTALL_INCLUDEDIR}>
+  $<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}>
+)
+
+install(
+  FILES antithesis_sdk.h
+  DESTINATION "${CMAKE_INSTALL_INCLUDEDIR}"
+)