rippled/docker/telemetry/RUNBOOK-two-node-host.md

Runbook: two-node xrpld host with Grafana Cloud telemetry

Operating a host that runs two xrpld instances side by side — one per storage backend — exporting metrics, traces and logs to Grafana Cloud.

Instance layout, ports and the reasoning behind them are in systemd/README.md. This document is the operational sequence: update, rebuild, run, verify.

Guiding rule: never edit tracked files on the host

Everything host-specific belongs in the host-local settings the unit installer reads, or in symlinks — never in a tracked config. A host that edits tracked configs in place will hit merge conflicts on every update, and those edits are lost the moment the machine is rebuilt. That has already happened once and cost a full reconstruction of the second instance.

If a host genuinely needs a tracked file to differ, add a systemd drop-in or a new host-local setting rather than editing the file.

---

1. One-time host setup

Run from the repository root once per machine.

Toolchain and container runtime. A C++ toolchain (cmake, g++, make, gdb), ccache, Conan, and Docker with the Compose plugin. Install Conan so it resolves on the non-interactive PATH — a user-local install works when you type it but fails under remote automation with conan: command not found, long after the host looks healthy.

Point Conan's cache at the fast local disk, not the root filesystem: it runs to tens of GB of small-file I/O.

Data directories on fast local storage. Create them on the fast mount and symlink them into the tree, so the configs stay portable:

mkdir -p "$FAST_MOUNT"/xrpld/data "$FAST_MOUNT"/xrpld/data2
ln -sfn "$FAST_MOUNT"/xrpld/data  docker/telemetry/data
ln -sfn "$FAST_MOUNT"/xrpld/data2 docker/telemetry/data2

Log directories where the collector looks. The collector reads /var/log/xrpld/<instance-id>/debug.log and derives each node's identity from that directory name, so the basename must match the instance id exactly:

mkdir -p "$FAST_MOUNT"/xrpld/data/logs/xrpld-mainnet \
         "$FAST_MOUNT"/xrpld/data2/logs/xrpld-mainnet2
sudo mkdir -p /var/log/xrpld
sudo ln -sfn "$FAST_MOUNT"/xrpld/data/logs/xrpld-mainnet   /var/log/xrpld/xrpld-mainnet
sudo ln -sfn "$FAST_MOUNT"/xrpld/data2/logs/xrpld-mainnet2 /var/log/xrpld/xrpld-mainnet2

Host-local settings and cloud credentials. Both are provided out of band and are never committed; the ignore rules already exclude them. Copy each tracked example in this directory to its working name, fill it in, and set mode 600. The unit installer refuses to run against a world-readable settings file.

Install the units:

sh docker/telemetry/systemd/install-units.sh

---

2. Update to the latest code on the branch in use

The working tree should contain no tracked modifications — only ignored files and symlinks. Check first:

git status --porcelain

Expect empty output. Anything listed is a host edit that should have been a host-local setting; resolve that before updating, or the next step will conflict.

BRANCH=$(git rev-parse --abbrev-ref HEAD)
git fetch origin "$BRANCH"
git merge --ff-only "origin/$BRANCH"

--ff-only is deliberate: a host should only ever move forward to what was pushed. If it refuses, the host has diverged and that needs investigating rather than forcing.

To move the host onto a different branch:

git fetch origin 'refs/heads/<namespace>/*:refs/remotes/origin/<namespace>/*'
git checkout -B <branch> "origin/<branch>"

The wide refspec is needed because a single-branch clone only tracks the branch it was cloned with, and git fetch origin <other> populates FETCH_HEAD without creating a remote-tracking ref.

---

3. Re-apply host overlays after an update

A checkout can replace a symlinked directory with a real one, and unit templates may have changed. After every update:

# Confirm the data directories are still symlinks to the fast mount
ls -ld docker/telemetry/data docker/telemetry/data2

# Reinstall units in case the templates changed
sh docker/telemetry/systemd/install-units.sh

Verify the ignored host files survived — they should, since a checkout does not touch ignored paths, but confirm their mode is still 600 before relying on them.

---

4. Build

Stop the nodes first if the binary is in use.

sudo systemctl stop xrpld-mainnet xrpld-mainnet2

The daemon is not built by default. The Conan recipe defaults its xrpld option to off, so it has to be requested explicitly. Omit it and everything appears to succeed — Conan and CMake both report success — and then the build fails with No rule to make target 'xrpld', because the target was never created.

conan install . --output-folder .build --build missing \
      --settings build_type=Release -o '&:xrpld=True'

cmake --preset conan-release

cmake --build .build/build/Release --target xrpld --parallel "$(nproc)"

Three details that are easy to get wrong, each of which fails in a way that misdirects:

• Configure through the preset, not a hand-written toolchain path. Conan writes the preset and the toolchain, and the toolchain does not sit where the single- versus multi-config layouts would suggest. Guessing the path yields Could not find toolchain file, followed by CMAKE_CXX_COMPILER not set, which reads as a broken compiler rather than a wrong path.

• The build directory is .build/build/Release, not .build. Building the wrong directory reports Generator: execution of make failed, which reads as a toolchain problem.

• The CMake cache is sticky. Changing a Conan option and re-running conan install does not change an already-cached CMake variable, so the daemon target stays absent even though the option was accepted. Confirm the value, and clear the cache if it disagrees:

  grep -E '^(xrpld|tests|telemetry):' .build/build/Release/CMakeCache.txt
  # if xrpld is not True:
  rm -f .build/build/Release/CMakeCache.txt
  rm -rf .build/build/Release/CMakeFiles
  cmake --preset conan-release
  

Further notes from experience:

• The first conan install on a fresh host compiles dependencies from source and takes far longer than later runs. Subsequent builds reuse the cache.
• A full link peaks around 30 GB of RSS. On a memory-constrained host reduce --parallel rather than letting the OOM killer take the build — or worse, take a running node.
• If Conan reports a missing default profile, its cache directory was created by a different user than the one running it. Fix ownership, then conan profile detect.
• A dependency added upstream fails cmake configure with a missing package before any compilation starts. Re-run conan install rather than assuming the build itself broke.

Confirm the binary is newer than the source you just pulled:

find .build -maxdepth 4 -name xrpld -type f -printf '%p %s bytes %TY-%Tm-%Td %TH:%TM\n'
git log -1 --format='%h %s'

5. Run the collector

Bring it up with both compose files. The base file alone yields a collector with only local exporters — telemetry silently never leaves the host, the Cloud dashboards read empty, and nothing logs an error. This has caused lost measurement runs more than once.

docker compose -f docker/telemetry/docker-compose.yml \
               -f docker/telemetry/docker-compose.grafanacloud.yaml \
               up -d --force-recreate

--force-recreate matters after any config change: without it Compose reuses the running container with its old configuration, so the change appears applied but is not.

Check it is up and quiet:

docker ps --format '{{.Names}}\t{{.Status}}'
docker logs --since 5m <collector-container> 2>&1 | grep -iE 'error|refused' | head

To confirm the cloud overlay is actually in effect, check which config file is bind-mounted into the container rather than reading the container's command line — the overlay mounts its config over the same path the base file uses, so the command line looks identical either way:

docker inspect <collector-container> \
  --format '{{range .Mounts}}{{.Source}} -> {{.Destination}}{{"\n"}}{{end}}' | grep -i config

---

6. Run the nodes

Start them one at a time, letting the first reach tracking or full before starting the second:

sudo systemctl start xrpld-mainnet
# poll until server_state is tracking or full, then:
sudo systemctl start xrpld-mainnet2

Health check per instance, against its own admin RPC port (see systemd/README.md for which port belongs to which):

curl -s --max-time 8 -H 'Content-Type: application/json' \
  -d '{"method":"server_info","params":[{}]}' http://127.0.0.1:<rpc_port>/ \
  | python3 -c 'import json,sys; i=json.load(sys.stdin)["result"]["info"]; \
print(i["server_state"], i["peers"], (i.get("validated_ledger") or {}).get("seq"))'

Both processes should be running from the freshly built binary — worth checking explicitly after a rebuild, since a unit that failed to restart leaves the old process in place:

for p in $(pgrep -f '[x]rpld --conf'); do readlink -f "/proc/$p/exe"; done

---

7. Verify telemetry end to end

Do not infer success from the exporter configuration — read the data back out of Grafana Cloud. Check all three signals, and check that each carries the right per-instance identity:

• Metrics — both instance ids should appear as label values, with fresh samples. A metric family present for one instance and absent for the other usually means one node has not reached the state that emits it, not that the exporter is broken.
• Traces — spans from both instances, with plausible durations.
• Logs — lines from both instances, and critically each carrying its instance-id label. If metrics have the label but logs do not, the log directory basename does not match the instance id.
• Log-to-trace correlation — log lines should carry trace and span ids.

---

8. When something looks wrong

Symptom	First thing to check
Cloud dashboards empty, no errors anywhere	Collector started without the cloud overlay, or without --force-recreate after a config change
Metrics have instance labels, logs do not	Log directory basename does not equal the instance id
Unit refuses to start	The data mount is missing; the units require it deliberately, so a node cannot silently fill the root filesystem
conan: command not found under automation	Conan installed user-locally instead of on the system PATH
Node runs an old binary after rebuild	The unit did not restart; stop both, rebuild, start again
Update refuses to fast-forward	The host has local commits or edits to tracked files — see the guiding rule at the top

Counter-intuitive signals worth knowing before drawing conclusions:

• A higher count of acquisition timeouts or sweep evictions does not by itself indicate a stalled node; on a faster host they can rise because the node retries its way forward more cheaply. Judge sync health by tree-fetch completion rate instead.
• Outbound byte counters are recorded when the node decides to send, not when the bytes reach the wire, so under a flood they can overstate egress by orders of magnitude. Compare against the interface counters before believing them.