Merge branch 'develop' of https://github.com/XRPLF/rippled into mvadari/payment-fixes

Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>

.github/ISSUE_TEMPLATE/feature_request.md

@@ -1,7 +1,7 @@
 ---
 name: Feature Request
-about: Suggest a new feature for the rippled project
-title: "[Title with short description] (Version: [rippled version])"
+about: Suggest a new feature for the xrpld project
+title: "[Title with short description] (Version: [xrpld version])"
 labels: Feature Request
 assignees: ""
 ---

.github/scripts/levelization/README.md

@@ -1,14 +1,14 @@
 # Levelization
 
-Levelization is the term used to describe efforts to prevent rippled from
+Levelization is the term used to describe efforts to prevent xrpld from
 having or creating cyclic dependencies.
 
-rippled code is organized into directories under `src/xrpld`, `src/libxrpl` (and
+xrpld code is organized into directories under `src/xrpld`, `src/libxrpl` (and
 `src/test`) representing modules. The modules are intended to be
 organized into "tiers" or "levels" such that a module from one level can
 only include code from lower levels. Additionally, a module
 in one level should never include code in an `impl` or `detail` folder of any level
-other than it's own.
+other than its own.
 
 The codebase is split into two main areas:
 
@@ -22,7 +22,7 @@ levelization violations they find (by moving files or individual
 classes). At the very least, don't make things worse.
 
 The table below summarizes the _desired_ division of modules, based on the current
-state of the rippled code. The levels are numbered from
+state of the xrpld code. The levels are numbered from
 the bottom up with the lower level, lower numbered, more independent
 modules listed first, and the higher level, higher numbered modules with
 more dependencies listed later.
@@ -72,10 +72,10 @@ that `test` code should _never_ be included in `xrpl` or `xrpld` code.)
 
 The [levelization](generate.py) script takes no parameters,
 reads no environment variables, and can be run from any directory,
-as long as it is in the expected location in the rippled repo.
+as long as it is in the expected location in the xrpld repo.
 It can be run at any time from within a checked out repo, and will
 do an analysis of all the `#include`s in
-the rippled source. The only caveat is that it runs much slower
+the xrpld source. The only caveat is that it runs much slower
 under Windows than in Linux. It hasn't yet been tested under MacOS.
 It generates many files of [results](results):
 

.github/scripts/rename/README.md

@@ -34,6 +34,8 @@ run from the repository root.
 6. `.github/scripts/rename/config.sh`: This script will rename the config from
    `rippled.cfg` to `xrpld.cfg`, and updating the code accordingly. The old
    filename will still be accepted.
+7. `.github/scripts/rename/docs.sh`: This script will rename any lingering
+   references of `ripple(d)` to `xrpl(d)` in code, comments, and documentation.
 
 You can run all these scripts from the repository root as follows:
 
@@ -44,4 +46,5 @@ You can run all these scripts from the repository root as follows:
 ./.github/scripts/rename/binary.sh .
 ./.github/scripts/rename/namespace.sh .
 ./.github/scripts/rename/config.sh .
+./.github/scripts/rename/docs.sh .
 ```

.github/scripts/rename/binary.sh

@@ -29,7 +29,7 @@ if [ ! -d "${DIRECTORY}" ]; then
     echo "Error: Directory '${DIRECTORY}' does not exist."
     exit 1
 fi
-pushd ${DIRECTORY}
+pushd "${DIRECTORY}"
 
 # Remove the binary name override added by the cmake.sh script.
 ${SED_COMMAND} -z -i -E 's@\s+# For the time being.+"rippled"\)@@' cmake/XrplCore.cmake
@@ -49,6 +49,7 @@ ${SED_COMMAND} -i -E 's@ripple/xrpld@XRPLF/rippled@g' BUILD.md
 ${SED_COMMAND} -i -E 's@XRPLF/xrpld@XRPLF/rippled@g' BUILD.md
 ${SED_COMMAND} -i -E 's@xrpld \(`xrpld`\)@xrpld@g' BUILD.md
 ${SED_COMMAND} -i -E 's@XRPLF/xrpld@XRPLF/rippled@g' CONTRIBUTING.md
+${SED_COMMAND} -i -E 's@XRPLF/xrpld@XRPLF/rippled@g' docs/build/install.md
 
 popd
 echo "Processing complete."

.github/scripts/rename/cmake.sh

@@ -38,7 +38,7 @@ if [ ! -d "${DIRECTORY}" ]; then
     echo "Error: Directory '${DIRECTORY}' does not exist."
     exit 1
 fi
-pushd ${DIRECTORY}
+pushd "${DIRECTORY}"
 
 # Rename the files.
 find cmake -type f -name 'Rippled*.cmake' -exec bash -c 'mv "${1}" "${1/Rippled/Xrpl}"' - {} \;

.github/scripts/rename/config.sh

@@ -28,7 +28,7 @@ if [ ! -d "${DIRECTORY}" ]; then
     echo "Error: Directory '${DIRECTORY}' does not exist."
     exit 1
 fi
-pushd ${DIRECTORY}
+pushd "${DIRECTORY}"
 
 # Add the xrpld.cfg to the .gitignore.
 if ! grep -q 'xrpld.cfg' .gitignore; then
@@ -52,16 +52,15 @@ for DIRECTORY in "${DIRECTORIES[@]}"; do
   find "${DIRECTORY}" -type f \( -name "*.h" -o -name "*.hpp" -o -name "*.ipp" -o -name "*.cpp" -o -name "*.cmake" -o -name "*.txt" -o -name "*.cfg" -o -name "*.md" \) | while read -r FILE; do
       echo "Processing file: ${FILE}"
       ${SED_COMMAND} -i -E 's/rippled(-example)?[ .]cfg/xrpld\1.cfg/g' "${FILE}"
+      ${SED_COMMAND} -i 's/rippleConfig/xrpldConfig/g' "${FILE}"
   done
 done
 ${SED_COMMAND} -i 's/rippled/xrpld/g' cfg/xrpld-example.cfg
 ${SED_COMMAND} -i 's/rippled/xrpld/g' src/test/core/Config_test.cpp
 ${SED_COMMAND} -i 's/ripplevalidators/xrplvalidators/g' src/test/core/Config_test.cpp # cspell: disable-line
-${SED_COMMAND} -i 's/rippleConfig/xrpldConfig/g' src/test/core/Config_test.cpp
 ${SED_COMMAND} -i 's@ripple/@xrpld/@g' src/test/core/Config_test.cpp
 ${SED_COMMAND} -i 's/Rippled/File/g' src/test/core/Config_test.cpp
 
-
 # Restore the old config file name in the code that maintains support for now.
 ${SED_COMMAND} -i 's/configLegacyName = "xrpld.cfg"/configLegacyName = "rippled.cfg"/g' src/xrpld/core/detail/Config.cpp
 

.github/scripts/rename/copyright.sh

@@ -31,7 +31,7 @@ if [ ! -d "${DIRECTORY}" ]; then
     echo "Error: Directory '${DIRECTORY}' does not exist."
     exit 1
 fi
-pushd ${DIRECTORY}
+pushd "${DIRECTORY}"
 
 # Prevent sed and echo from removing newlines and tabs in string literals by
 # temporarily replacing them with placeholders. This only affects one file.
@@ -76,11 +76,11 @@ fi
 if ! grep -q 'Dev Null' src/test/rpc/ValidatorInfo_test.cpp; then
   echo -e "// Copyright (c) 2020 Dev Null Productions\n\n$(cat src/test/rpc/ValidatorInfo_test.cpp)" > src/test/rpc/ValidatorInfo_test.cpp
 fi
-if ! grep -q 'Dev Null' src/xrpld/rpc/handlers/DoManifest.cpp; then
-  echo -e "// Copyright (c) 2019 Dev Null Productions\n\n$(cat src/xrpld/rpc/handlers/DoManifest.cpp)" > src/xrpld/rpc/handlers/DoManifest.cpp
+if ! grep -q 'Dev Null' src/xrpld/rpc/handlers/server_info/Manifest.cpp; then
+  echo -e "// Copyright (c) 2019 Dev Null Productions\n\n$(cat src/xrpld/rpc/handlers/server_info/Manifest.cpp)" > src/xrpld/rpc/handlers/server_info/Manifest.cpp
 fi
-if ! grep -q 'Dev Null' src/xrpld/rpc/handlers/ValidatorInfo.cpp; then
-  echo -e "// Copyright (c) 2019 Dev Null Productions\n\n$(cat src/xrpld/rpc/handlers/ValidatorInfo.cpp)" > src/xrpld/rpc/handlers/ValidatorInfo.cpp
+if ! grep -q 'Dev Null' src/xrpld/rpc/handlers/admin/status/ValidatorInfo.cpp; then
+  echo -e "// Copyright (c) 2019 Dev Null Productions\n\n$(cat src/xrpld/rpc/handlers/admin/status/ValidatorInfo.cpp)" > src/xrpld/rpc/handlers/admin/status/ValidatorInfo.cpp
 fi
 if ! grep -q 'Bougalis' include/xrpl/basics/SlabAllocator.h; then
   echo -e "// Copyright (c) 2022, Nikolaos D. Bougalis <nikb@bougalis.net>\n\n$(cat include/xrpl/basics/SlabAllocator.h)" > include/xrpl/basics/SlabAllocator.h # cspell: ignore Nikolaos Bougalis nikb

.github/scripts/rename/docs.sh

@@ -0,0 +1,96 @@
+#!/bin/bash
+
+# Exit the script as soon as an error occurs.
+set -e
+
+# On MacOS, ensure that GNU sed is installed and available as `gsed`.
+SED_COMMAND=sed
+if [[ "${OSTYPE}" == 'darwin'* ]]; then
+  if ! command -v gsed &> /dev/null; then
+      echo "Error: gsed is not installed. Please install it using 'brew install gnu-sed'."
+      exit 1
+  fi
+  SED_COMMAND=gsed
+fi
+
+# This script renames all remaining references to `ripple` and `rippled` to
+# `xrpl` and `xrpld`, respectively, in code, comments, and documentation.
+# Usage: .github/scripts/rename/docs.sh <repository directory>
+
+if [ "$#" -ne 1 ]; then
+    echo "Usage: $0 <repository directory>"
+    exit 1
+fi
+
+DIRECTORY=$1
+echo "Processing directory: ${DIRECTORY}"
+if [ ! -d "${DIRECTORY}" ]; then
+    echo "Error: Directory '${DIRECTORY}' does not exist."
+    exit 1
+fi
+pushd "${DIRECTORY}"
+
+find . -type f \( -name "*.h" -o -name "*.hpp" -o -name "*.ipp" -o -name "*.cpp" -o -name "*.txt" -o -name "*.cfg" -o -name "*.md" -o -name "*.proto" \) -not -path "./.github/scripts/*" | while read -r FILE; do
+    echo "Processing file: ${FILE}"
+    ${SED_COMMAND} -i 's/rippleLockEscrowMPT/lockEscrowMPT/g' "${FILE}"
+    ${SED_COMMAND} -i 's/rippleUnlockEscrowMPT/unlockEscrowMPT/g' "${FILE}"
+    ${SED_COMMAND} -i 's/rippleCredit/directSendNoFee/g' "${FILE}"
+    ${SED_COMMAND} -i 's/rippleSend/directSendNoLimit/g' "${FILE}"
+    ${SED_COMMAND} -i -E 's@([^/+-])rippled@\1xrpld@g' "${FILE}"
+    ${SED_COMMAND} -i -E 's@([^/+-])Rippled@\1Xrpld@g' "${FILE}"
+    ${SED_COMMAND} -i -E 's/^rippled/xrpld/g' "${FILE}"
+    ${SED_COMMAND} -i -E 's/^Rippled/Xrpld/g' "${FILE}"
+    # cspell: disable
+    ${SED_COMMAND} -i -E 's/(r|R)ipple (a|A)ddress/XRPL address/g' "${FILE}"
+    ${SED_COMMAND} -i -E 's/(r|R)ipple (a|A)ccount/XRPL account/g' "${FILE}"
+    ${SED_COMMAND} -i -E 's/(r|R)ipple (a|A)lgorithm/XRPL algorithm/g' "${FILE}"
+    ${SED_COMMAND} -i -E 's/(r|R)ipple (c|C)lient/XRPL client/g' "${FILE}"
+    ${SED_COMMAND} -i -E 's/(r|R)ipple (c|C)luster/XRPL cluster/g' "${FILE}"
+    ${SED_COMMAND} -i -E 's/(r|R)ipple (c|C)onsensus/XRPL consensus/g' "${FILE}"
+    ${SED_COMMAND} -i -E 's/(r|R)ipple (d|D)efault/XRPL default/g' "${FILE}"
+    ${SED_COMMAND} -i -E 's/(r|R)ipple (e|E)poch/XRPL epoch/g' "${FILE}"
+    ${SED_COMMAND} -i -E 's/(r|R)ipple (f|F)eature/XRPL feature/g' "${FILE}"
+    ${SED_COMMAND} -i -E 's/(r|R)ipple (n|N)etwork/XRPL network/g' "${FILE}"
+    ${SED_COMMAND} -i -E 's/(r|R)ipple (p|P)ayment/XRPL payment/g' "${FILE}"
+    ${SED_COMMAND} -i -E 's/(r|R)ipple (p|P)rotocol/XRPL protocol/g' "${FILE}"
+    ${SED_COMMAND} -i -E 's/(r|R)ipple (r|R)epository/XRPL repository/g' "${FILE}"
+    ${SED_COMMAND} -i -E 's/(r|R)ipple RPC/XRPL RPC/g' "${FILE}"
+    ${SED_COMMAND} -i -E 's/(r|R)ipple (s|S)erialization/XRPL serialization/g' "${FILE}"
+    ${SED_COMMAND} -i -E 's/(r|R)ipple (s|S)erver/XRPL server/g' "${FILE}"
+    ${SED_COMMAND} -i -E 's/(r|R)ipple (s|S)pecific/XRPL specific/g' "${FILE}"
+    ${SED_COMMAND} -i -E 's/(r|R)ipple Source/XRPL Source/g' "${FILE}"
+    ${SED_COMMAND} -i -E 's/(r|R)ipple (t|T)imestamp/XRPL timestamp/g' "${FILE}"
+    ${SED_COMMAND} -i -E 's/(r|R)ipple uses the consensus/XRPL uses the consensus/g' "${FILE}"
+    ${SED_COMMAND} -i -E 's/(r|R)ipple (v|V)alidator/XRPL validator/g' "${FILE}"
+    # cspell: enable
+    ${SED_COMMAND} -i 's/RippleLib/XrplLib/g' "${FILE}"
+    ${SED_COMMAND} -i 's/ripple-lib/XrplLib/g' "${FILE}"
+    ${SED_COMMAND} -i 's@opt/ripple/@opt/xrpld/@g' "${FILE}"
+    ${SED_COMMAND} -i 's@src/ripple/@src/xrpld/@g' "${FILE}"
+    ${SED_COMMAND} -i 's@ripple/app/@xrpld/app/@g' "${FILE}"
+    ${SED_COMMAND} -i 's@github.com/ripple/rippled@github.com/XRPLF/rippled@g' "${FILE}"
+    ${SED_COMMAND} -i 's/\ba xrpl/an xrpl/g' "${FILE}"
+    ${SED_COMMAND} -i 's/\ba XRPL/an XRPL/g' "${FILE}"
+done
+${SED_COMMAND} -i 's/ripple_libs/xrpl_libs/' BUILD.md
+${SED_COMMAND} -i 's/Ripple integrators/XRPL developers/' README.md
+${SED_COMMAND} -i 's/sanitizer-configuration-for-rippled/sanitizer-configuration-for-xrpld/' docs/build/sanitizers.md
+${SED_COMMAND} -i 's/rippled/xrpld/g' .github/scripts/levelization/README.md
+${SED_COMMAND} -i 's/rippled/xrpld/g' .github/scripts/strategy-matrix/generate.py
+${SED_COMMAND} -i 's@/rippled@/xrpld@g' docs/build/install.md
+${SED_COMMAND} -i 's@github.com/XRPLF/xrpld@github.com/XRPLF/rippled@g' docs/build/install.md
+${SED_COMMAND} -i 's/rippled/xrpld/g' docs/Doxyfile
+${SED_COMMAND} -i 's/ripple_basics/basics/' include/xrpl/basics/CountedObject.h
+${SED_COMMAND} -i 's/<ripple/<xrpl/' include/xrpl/protocol/AccountID.h
+${SED_COMMAND} -i 's/Ripple:/the XRPL:/g' include/xrpl/protocol/SecretKey.h
+${SED_COMMAND} -i 's/Ripple:/the XRPL:/g' include/xrpl/protocol/Seed.h
+${SED_COMMAND} -i 's/ripple/xrpl/g' src/test/README.md
+${SED_COMMAND} -i 's/www.ripple.com/www.xrpl.org/g' src/test/protocol/Seed_test.cpp
+
+# Restore specific changes.
+${SED_COMMAND} -i 's@b5efcc/src/xrpld@b5efcc/src/ripple@' include/xrpl/protocol/README.md
+${SED_COMMAND} -i 's/dbPrefix_ = "xrpldb"/dbPrefix_ = "rippledb"/' src/xrpld/app/misc/SHAMapStoreImp.h # cspell: disable-line
+${SED_COMMAND} -i 's/configLegacyName = "xrpld.cfg"/configLegacyName = "rippled.cfg"/' src/xrpld/core/detail/Config.cpp
+
+popd
+echo "Renaming complete."

.github/scripts/rename/namespace.sh

@@ -31,16 +31,17 @@ if [ ! -d "${DIRECTORY}" ]; then
     echo "Error: Directory '${DIRECTORY}' does not exist."
     exit 1
 fi
-pushd ${DIRECTORY}
+pushd "${DIRECTORY}"
 
 DIRECTORIES=("include" "src" "tests")
 for DIRECTORY in "${DIRECTORIES[@]}"; do
   echo "Processing directory: ${DIRECTORY}"
 
-  find "${DIRECTORY}" -type f \( -name "*.h" -o -name "*.hpp" -o -name "*.ipp" -o -name "*.cpp" \) | while read -r FILE; do
+  find "${DIRECTORY}" -type f \( -name "*.h" -o -name "*.hpp" -o -name "*.ipp" -o -name "*.cpp" -o -name "*.macro" \) | while read -r FILE; do
       echo "Processing file: ${FILE}"
       ${SED_COMMAND} -i 's/namespace ripple/namespace xrpl/g' "${FILE}"
       ${SED_COMMAND} -i 's/ripple::/xrpl::/g' "${FILE}"
+      ${SED_COMMAND} -i 's/"ripple:/"xrpl::/g' "${FILE}"
       ${SED_COMMAND} -i -E 's/(BEAST_DEFINE_TESTSUITE.+)ripple(.+)/\1xrpl\2/g' "${FILE}"
   done
 done

.github/scripts/strategy-matrix/generate.py

@@ -235,7 +235,7 @@ def generate_strategy_matrix(all: bool, config: Config) -> list:
         # so that they are easier to identify in the GitHub Actions UI, as long
         # names get truncated.
         # Add Address and Thread (both coupled with UB) sanitizers for specific bookworm distros.
-        # GCC-Asan rippled-embedded tests are failing because of https://github.com/google/sanitizers/issues/856
+        # GCC-Asan xrpld-embedded tests are failing because of https://github.com/google/sanitizers/issues/856
         if (
             os["distro_version"] == "bookworm"
             and f"{os['compiler_name']}-{os['compiler_version']}" == "clang-20"

.github/workflows/check-pr-commits.yml

@@ -10,4 +10,4 @@ permissions:
 
 jobs:
   check_commits:
-    uses: XRPLF/actions/.github/workflows/check-pr-commits.yml@481048b78b94ac3343d1292b4ef125a813879f2b
+    uses: XRPLF/actions/.github/workflows/check-pr-commits.yml@e2c7f400d1e85ae65dad552fd425169fbacca4a3

.github/workflows/check-pr-title.yml

@@ -11,4 +11,4 @@ on:
 jobs:
   check_title:
     if: ${{ github.event.pull_request.draft != true }}
-    uses: XRPLF/actions/.github/workflows/check-pr-title.yml@e2c7f400d1e85ae65dad552fd425169fbacca4a3
+    uses: XRPLF/actions/.github/workflows/check-pr-title.yml@a5d8dd35be543365e90a11358447130c8763871d

.github/workflows/pre-commit.yml

@@ -14,7 +14,7 @@ on:
 jobs:
   # Call the workflow in the XRPLF/actions repo that runs the pre-commit hooks.
   run-hooks:
-    uses: XRPLF/actions/.github/workflows/pre-commit.yml@e7896f15cc60d0da1a272c77ee5c4026b424f9c7
+    uses: XRPLF/actions/.github/workflows/pre-commit.yml@9307df762265e15c745ddcdb38a581c989f7f349
     with:
       runs_on: ubuntu-latest
       container: '{ "image": "ghcr.io/xrplf/ci/tools-rippled-pre-commit:sha-41ec7c1" }'

.github/workflows/publish-docs.yml

@@ -47,7 +47,7 @@ jobs:
         uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
 
       - name: Prepare runner
-        uses: XRPLF/actions/prepare-runner@2bbc2dc1abeec7bfaa886804ab86871ac201764e
+        uses: XRPLF/actions/prepare-runner@90f11ee655d1687824fb8793db770477d52afbab
         with:
           enable_ccache: false
 
@@ -81,13 +81,13 @@ jobs:
           cmake --build . --target docs --parallel ${BUILD_NPROC}
 
       - name: Create documentation artifact
-        if: ${{ (github.repository_owner == 'XRPLF' || github.event.repository.visibility == 'public') && github.event_name == 'push' }}
+        if: ${{ github.event.repository.visibility == 'public' && github.event_name == 'push' }}
         uses: actions/upload-pages-artifact@7b1f4a764d45c48632c6b24a0339c27f5614fb0b # v4.0.0
         with:
           path: ${{ env.BUILD_DIR }}/docs/html
 
   deploy:
-    if: ${{ (github.repository_owner == 'XRPLF' || github.event.repository.visibility == 'public') && github.event_name == 'push' }}
+    if: ${{ github.repository == 'XRPLF/rippled' && github.event_name == 'push' }}
     needs: build
     runs-on: ubuntu-latest
     permissions:

.github/workflows/reusable-build-test-config.yml

@@ -107,7 +107,7 @@ jobs:
         uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
 
       - name: Prepare runner
-        uses: XRPLF/actions/prepare-runner@2bbc2dc1abeec7bfaa886804ab86871ac201764e
+        uses: XRPLF/actions/prepare-runner@90f11ee655d1687824fb8793db770477d52afbab
         with:
           enable_ccache: ${{ inputs.ccache_enabled }}
 
@@ -199,7 +199,7 @@ jobs:
           fi
 
       - name: Upload the binary (Linux)
-        if: ${{ (github.repository_owner == 'XRPLF' || github.event.repository.visibility == 'public') && runner.os == 'Linux' }}
+        if: ${{ github.event.repository.visibility == 'public' && runner.os == 'Linux' }}
         uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f # v7.0.0
         with:
           name: xrpld-${{ inputs.config_name }}

.github/workflows/reusable-check-rename.yml

@@ -33,6 +33,8 @@ jobs:
         run: .github/scripts/rename/config.sh .
       - name: Check include guards
         run: .github/scripts/rename/include.sh .
+      - name: Check documentation
+        run: .github/scripts/rename/docs.sh .
       - name: Check for differences
         env:
           MESSAGE: |

.github/workflows/reusable-clang-tidy-files.yml

@@ -35,7 +35,7 @@ jobs:
         uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
 
       - name: Prepare runner
-        uses: XRPLF/actions/prepare-runner@2bbc2dc1abeec7bfaa886804ab86871ac201764e
+        uses: XRPLF/actions/prepare-runner@90f11ee655d1687824fb8793db770477d52afbab
         with:
           enable_ccache: false
 
@@ -83,7 +83,7 @@ jobs:
           run-clang-tidy -j ${{ steps.nproc.outputs.nproc }} -p "${BUILD_DIR}" -quiet -allow-no-checks ${TARGETS} 2>&1 | tee clang-tidy-output.txt
 
       - name: Upload clang-tidy output
-        if: ${{ (github.repository_owner == 'XRPLF' || github.event.repository.visibility == 'public') && steps.run_clang_tidy.outcome != 'success' }}
+        if: ${{ github.event.repository.visibility == 'public' && steps.run_clang_tidy.outcome != 'success' }}
         uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f # v7.0.0
         with:
           name: clang-tidy-results

.github/workflows/upload-conan-deps.yml

@@ -70,7 +70,7 @@ jobs:
         uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
 
       - name: Prepare runner
-        uses: XRPLF/actions/prepare-runner@2bbc2dc1abeec7bfaa886804ab86871ac201764e
+        uses: XRPLF/actions/prepare-runner@90f11ee655d1687824fb8793db770477d52afbab
         with:
           enable_ccache: false
 

API-CHANGELOG.md

@@ -4,23 +4,23 @@ This changelog is intended to list all updates to the [public API methods](https
 
 For info about how [API versioning](https://xrpl.org/request-formatting.html#api-versioning) works, including examples, please view the [XLS-22d spec](https://github.com/XRPLF/XRPL-Standards/discussions/54). For details about the implementation of API versioning, view the [implementation PR](https://github.com/XRPLF/rippled/pull/3155). API versioning ensures existing integrations and users continue to receive existing behavior, while those that request a higher API version will experience new behavior.
 
-The API version controls the API behavior you see. This includes what properties you see in responses, what parameters you're permitted to send in requests, and so on. You specify the API version in each of your requests. When a breaking change is introduced to the `rippled` API, a new version is released. To avoid breaking your code, you should set (or increase) your version when you're ready to upgrade.
+The API version controls the API behavior you see. This includes what properties you see in responses, what parameters you're permitted to send in requests, and so on. You specify the API version in each of your requests. When a breaking change is introduced to the `xrpld` API, a new version is released. To avoid breaking your code, you should set (or increase) your version when you're ready to upgrade.
 
 The [commandline](https://xrpl.org/docs/references/http-websocket-apis/api-conventions/request-formatting/#commandline-format) always uses the latest API version. The command line is intended for ad-hoc usage by humans, not programs or automated scripts. The command line is not meant for use in production code.
 
-For a log of breaking changes, see the **API Version [number]** headings. In general, breaking changes are associated with a particular API Version number. For non-breaking changes, scroll to the **XRP Ledger version [x.y.z]** headings. Non-breaking changes are associated with a particular XRP Ledger (`rippled`) release.
+For a log of breaking changes, see the **API Version [number]** headings. In general, breaking changes are associated with a particular API Version number. For non-breaking changes, scroll to the **XRP Ledger version [x.y.z]** headings. Non-breaking changes are associated with a particular XRP Ledger (`xrpld`) release.
 
 ## API Version 3 (Beta)
 
-API version 3 is currently a beta API. It requires enabling `[beta_rpc_api]` in the rippled configuration to use. See [API-VERSION-3.md](API-VERSION-3.md) for the full list of changes in API version 3.
+API version 3 is currently a beta API. It requires enabling `[beta_rpc_api]` in the xrpld configuration to use. See [API-VERSION-3.md](API-VERSION-3.md) for the full list of changes in API version 3.
 
 ## API Version 2
 
-API version 2 is available in `rippled` version 2.0.0 and later. See [API-VERSION-2.md](API-VERSION-2.md) for the full list of changes in API version 2.
+API version 2 is available in `xrpld` version 2.0.0 and later. See [API-VERSION-2.md](API-VERSION-2.md) for the full list of changes in API version 2.
 
 ## API Version 1
 
-This version is supported by all `rippled` versions. For WebSocket and HTTP JSON-RPC requests, it is currently the default API version used when no `api_version` is specified.
+This version is supported by all `xrpld` versions. For WebSocket and HTTP JSON-RPC requests, it is currently the default API version used when no `api_version` is specified.
 
 ## Unreleased
 
@@ -38,6 +38,8 @@ This section contains changes targeting a future version.
 ### Bugfixes
 
 - Peer Crawler: The `port` field in `overlay.active[]` now consistently returns an integer instead of a string for outbound peers. [#6318](https://github.com/XRPLF/rippled/pull/6318)
+- `ping`: The `ip` field is no longer returned as an empty string for proxied connections without a forwarded-for header. It is now omitted, consistent with the behavior for identified connections. [#6730](https://github.com/XRPLF/rippled/pull/6730)
+- gRPC `GetLedgerDiff`: Fixed error message that incorrectly said "base ledger not validated" when the desired ledger was not validated. [#6730](https://github.com/XRPLF/rippled/pull/6730)
 
 ## XRP Ledger server version 3.1.0
 

API-VERSION-2.md

@@ -1,6 +1,6 @@
 # API Version 2
 
-API version 2 is available in `rippled` version 2.0.0 and later. To use this API, clients specify `"api_version" : 2` in each request.
+API version 2 is available in `xrpld` version 2.0.0 and later. To use this API, clients specify `"api_version" : 2` in each request.
 
 For info about how [API versioning](https://xrpl.org/request-formatting.html#api-versioning) works, including examples, please view the [XLS-22d spec](https://github.com/XRPLF/XRPL-Standards/discussions/54). For details about the implementation of API versioning, view the [implementation PR](https://github.com/XRPLF/rippled/pull/3155). API versioning ensures existing integrations and users continue to receive existing behavior, while those that request a higher API version will experience new behavior.
 

API-VERSION-3.md

@@ -1,6 +1,6 @@
 # API Version 3
 
-API version 3 is currently a **beta API**. It requires enabling `[beta_rpc_api]` in the rippled configuration to use. To use this API, clients specify `"api_version" : 3` in each request.
+API version 3 is currently a **beta API**. It requires enabling `[beta_rpc_api]` in the xrpld configuration to use. To use this API, clients specify `"api_version" : 3` in each request.
 
 For info about how [API versioning](https://xrpl.org/request-formatting.html#api-versioning) works, including examples, please view the [XLS-22d spec](https://github.com/XRPLF/XRPL-Standards/discussions/54). For details about the implementation of API versioning, view the [implementation PR](https://github.com/XRPLF/rippled/pull/3155). API versioning ensures existing integrations and users continue to receive existing behavior, while those that request a higher API version will experience new behavior.
 

BUILD.md

@@ -603,8 +603,8 @@ If you want to experiment with a new package, follow these steps:
      `default_options` property (with syntax `'$package:$option': $value`).
 3. Modify [`CMakeLists.txt`](./CMakeLists.txt):
    - Add a call to `find_package($package REQUIRED)`.
-   - Link a library from the package to the target `ripple_libs`
-     (search for the existing call to `target_link_libraries(ripple_libs INTERFACE ...)`).
+   - Link a library from the package to the target `xrpl_libs`
+     (search for the existing call to `target_link_libraries(xrpl_libs INTERFACE ...)`).
 4. Start coding! Don't forget to include whatever headers you need from the package.
 
 [1]: https://github.com/conan-io/conan-center-index/issues/13168

CONTRIBUTING.md

@@ -533,7 +533,7 @@ All releases, including release candidates and betas, are handled
 differently from typical PRs. Most importantly, never use
 the Github UI to merge a release.
 
-Rippled uses a linear workflow model that can be summarized as:
+Xrpld uses a linear workflow model that can be summarized as:
 
 1. In between releases, developers work against the `develop` branch.
 2. Periodically, a maintainer will build and tag a beta version from

README.md

@@ -8,11 +8,11 @@ The [XRP Ledger](https://xrpl.org/) is a decentralized cryptographic ledger powe
 
 [XRP](https://xrpl.org/xrp.html) is a public, counterparty-free crypto-asset native to the XRP Ledger, and is designed as a gas token for network services and to bridge different currencies. XRP is traded on the open-market and is available for anyone to access. The XRP Ledger was created in 2012 with a finite supply of 100 billion units of XRP.
 
-## rippled
+## xrpld
 
-The server software that powers the XRP Ledger is called `rippled` and is available in this repository under the permissive [ISC open-source license](LICENSE.md). The `rippled` server software is written primarily in C++ and runs on a variety of platforms. The `rippled` server software can run in several modes depending on its [configuration](https://xrpl.org/rippled-server-modes.html).
+The server software that powers the XRP Ledger is called `xrpld` and is available in this repository under the permissive [ISC open-source license](LICENSE.md). The `xrpld` server software is written primarily in C++ and runs on a variety of platforms. The `xrpld` server software can run in several modes depending on its [configuration](https://xrpl.org/rippled-server-modes.html).
 
-If you are interested in running an **API Server** (including a **Full History Server**), take a look at [Clio](https://github.com/XRPLF/clio). (rippled Reporting Mode has been replaced by Clio.)
+If you are interested in running an **API Server** (including a **Full History Server**), take a look at [Clio](https://github.com/XRPLF/clio). (xrpld Reporting Mode has been replaced by Clio.)
 
 ### Build from Source
 
@@ -41,19 +41,19 @@ If you are interested in running an **API Server** (including a **Full History S
 
 Here are some good places to start learning the source code:
 
-- Read the markdown files in the source tree: `src/ripple/**/*.md`.
+- Read the markdown files in the source tree: `src/xrpld/**/*.md`.
 - Read [the levelization document](.github/scripts/levelization) to get an idea of the internal dependency graph.
 - In the big picture, the `main` function constructs an `ApplicationImp` object, which implements the `Application` virtual interface. Almost every component in the application takes an `Application&` parameter in its constructor, typically named `app` and stored as a member variable `app_`. This allows most components to depend on any other component.
 
 ### Repository Contents
 
-| Folder     | Contents                                         |
-| :--------- | :----------------------------------------------- |
-| `./bin`    | Scripts and data files for Ripple integrators.   |
-| `./Builds` | Platform-specific guides for building `rippled`. |
-| `./docs`   | Source documentation files and doxygen config.   |
-| `./cfg`    | Example configuration files.                     |
-| `./src`    | Source code.                                     |
+| Folder     | Contents                                       |
+| :--------- | :--------------------------------------------- |
+| `./bin`    | Scripts and data files for XRPL developers.    |
+| `./Builds` | Platform-specific guides for building `xrpld`. |
+| `./docs`   | Source documentation files and doxygen config. |
+| `./cfg`    | Example configuration files.                   |
+| `./src`    | Source code.                                   |
 
 Some of the directories under `src` are external repositories included using
 git-subtree. See those directories' README files for more details.

SECURITY.md

@@ -6,7 +6,7 @@ For more details on operating an XRP Ledger server securely, please visit https:
 
 ## Supported Versions
 
-Software constantly evolves. In order to focus resources, we only generally only accept vulnerability reports that affect recent and current versions of the software. We always accept reports for issues present in the **master**, **release** or **develop** branches, and with proposed, [open pull requests](https://github.com/ripple/rippled/pulls).
+Software constantly evolves. In order to focus resources, we generally only accept vulnerability reports that affect recent and current versions of the software. We always accept reports for issues present in the **master**, **release** or **develop** branches, and with proposed, [open pull requests](https://github.com/XRPLF/rippled/pulls).
 
 ## Identifying and Reporting Vulnerabilities
 
@@ -59,11 +59,11 @@ While we commit to responding with 24 hours of your initial report with our tria
 
 ## Bug Bounty Program
 
-[Ripple](https://ripple.com) is generously sponsoring a bug bounty program for vulnerabilities in [`rippled`](https://github.com/XRPLF/rippled) (and other related projects, like [`xrpl.js`](https://github.com/XRPLF/xrpl.js), [`xrpl-py`](https://github.com/XRPLF/xrpl-py), [`xrpl4j`](https://github.com/XRPLF/xrpl4j)).
+[Ripple](https://ripple.com) is generously sponsoring a bug bounty program for vulnerabilities in [`xrpld`](https://github.com/XRPLF/rippled) (and other related projects, like [`xrpl.js`](https://github.com/XRPLF/xrpl.js), [`xrpl-py`](https://github.com/XRPLF/xrpl-py), [`xrpl4j`](https://github.com/XRPLF/xrpl4j)).
 
 This program allows us to recognize and reward individuals or groups that identify and report bugs. In summary, in order to qualify for a bounty, the bug must be:
 
-1. **In scope**. Only bugs in software under the scope of the program qualify. Currently, that means `rippled`, `xrpl.js`, `xrpl-py`, `xrpl4j`.
+1. **In scope**. Only bugs in software under the scope of the program qualify. Currently, that means `xrpld`, `xrpl.js`, `xrpl-py`, `xrpl4j`.
 2. **Relevant**. A security issue, posing a danger to user funds, privacy, or the operation of the XRP Ledger.
 3. **Original and previously unknown**. Bugs that are already known and discussed in public do not qualify. Previously reported bugs, even if publicly unknown, are not eligible.
 4. **Specific**. We welcome general security advice or recommendations, but we cannot pay bounties for that.

cfg/validators-example.txt

@@ -28,7 +28,7 @@
 #    https://vl.ripple.com
 #    https://unl.xrplf.org
 #    http://127.0.0.1:8000
-#    file:///etc/opt/ripple/vl.txt
+#    file:///etc/opt/xrpld/vl.txt
 #
 # [validator_list_keys]
 #
@@ -43,11 +43,11 @@
 #    ED307A760EE34F2D0CAA103377B1969117C38B8AA0AA1E2A24DAC1F32FC97087ED
 #
 
-# The default validator list publishers that the rippled instance
+# The default validator list publishers that the xrpld instance
 # trusts.
 #
-# WARNING: Changing these values can cause your rippled instance to see a
-#          validated ledger that contradicts other rippled instances'
+# WARNING: Changing these values can cause your xrpld instance to see a
+#          validated ledger that contradicts other xrpld instances'
 #          validated ledgers (aka a ledger fork) if your validator list(s)
 #          do not sufficiently overlap with the list(s) used by others.
 #          See: https://arxiv.org/pdf/1802.07242.pdf

cfg/xrpld-example.cfg

@@ -9,7 +9,7 @@
 #
 #   2. Peer Protocol
 #
-#   3. Ripple Protocol
+#   3. XRPL protocol
 #
 #   4. HTTPS Client
 #
@@ -383,7 +383,7 @@
 #
 #   These settings control security and access attributes of the Peer to Peer
 #   server section of the xrpld process. Peer Protocol implements the
-#   Ripple Payment protocol. It is over peer connections that transactions
+#   XRPL payment protocol. It is over peer connections that transactions
 #   and validations are passed from to machine to machine, to determine the
 #   contents of validated ledgers.
 #
@@ -406,7 +406,7 @@
 #
 # [ips]
 #
-#   List of hostnames or ips where the Ripple protocol is served.  A default
+#   List of hostnames or ips where the XRPL protocol is served.  A default
 #   starter list is included in the code and used if no other hostnames are
 #   available.
 #
@@ -435,7 +435,7 @@
 #   List of IP addresses or hostnames to which xrpld should always attempt to
 #   maintain peer connections with. This is useful for manually forming private
 #   networks, for example to configure a validation server that connects to the
-#   Ripple network through a public-facing server, or for building a set
+#   XRPL network through a public-facing server, or for building a set
 #   of cluster peers.
 #
 #   One address or domain names per line is allowed. A port must be specified
@@ -748,8 +748,8 @@
 #   the folder in which the xrpld.cfg file is located.
 #
 #   Examples:
-#    /home/ripple/validators.txt
-#    C:/home/ripple/validators.txt
+#    /home/username/validators.txt
+#    C:/home/username/validators.txt
 #
 #   Example content:
 #    [validators]
@@ -840,7 +840,7 @@
 #
 #   0: Disable the ledger replay feature [default]
 #   1: Enable the ledger replay feature. With this feature enabled, when
-#      acquiring a ledger from the network, a xrpld node only downloads
+#      acquiring a ledger from the network, an xrpld node only downloads
 #      the ledger header and the transactions instead of the whole ledger.
 #      And the ledger is built by applying the transactions to the parent
 #      ledger.
@@ -853,7 +853,7 @@
 #
 #   The xrpld server instance uses HTTPS GET requests in a variety of
 #   circumstances, including but not limited to contacting trusted domains to
-#   fetch information such as mapping an email address to a Ripple Payment
+#   fetch information such as mapping an email address to an XRPL payment
 #   Network address.
 #
 # [ssl_verify]
@@ -1227,7 +1227,7 @@
 #
 #----------
 #
-#   The vote settings configure settings for the entire Ripple network.
+#   The vote settings configure settings for the entire XRPL network.
 #   While a single instance of xrpld cannot unilaterally enforce network-wide
 #   settings, these choices become part of the instance's vote during the
 #   consensus process for each voting ledger.

cspell.config.yaml

@@ -44,6 +44,10 @@ suggestWords:
 words:
   - abempty
   - AMMID
+  - AMMMPT
+  - AMMMPToken
+  - AMMMPTokens
+  - AMMXRP
   - amt
   - amts
   - asnode
@@ -96,6 +100,7 @@ words:
   - distro
   - doxyfile
   - dxrpl
+  - enabled
   - endmacro
   - exceptioned
   - Falco
@@ -148,6 +153,8 @@ words:
   - ltype
   - mcmodel
   - MEMORYSTATUSEX
+  - MPTAMM
+  - MPTDEX
   - Merkle
   - Metafuncton
   - misprediction
@@ -157,6 +164,7 @@ words:
   - mptid
   - mptissuance
   - mptissuanceid
+  - mptissue
   - mptoken
   - mptokenid
   - mptokenissuance

docs/0001-negative-unl/README.md

@@ -558,7 +558,7 @@ network delay. A test case specifies:
 1. a UNL with different number of validators for different test cases,
 1. a network with zero or more non-validator nodes,
 1. a sequence of validator reliability change events (by killing/restarting
-   nodes, or by running modified rippled that does not send all validation
+   nodes, or by running modified xrpld that does not send all validation
    messages),
 1. the correct outcomes.
 
@@ -566,7 +566,7 @@ For all the test cases, the correct outcomes are verified by examining logs. We
 will grep the log to see if the correct negative UNLs are generated, and whether
 or not the network is making progress when it should be. The ripdtop tool will
 be helpful for monitoring validators' states and ledger progress. Some of the
-timing parameters of rippled will be changed to have faster ledger time. Most if
+timing parameters of xrpld will be changed to have faster ledger time. Most if
 not all test cases do not need client transactions.
 
 For example, the test cases for the prototype:
@@ -583,7 +583,7 @@ For example, the test cases for the prototype:
 
 We considered testing with the current unit test framework, specifically the
 [Consensus Simulation
-Framework](https://github.com/ripple/rippled/blob/develop/src/test/csf/README.md)
+Framework](https://github.com/XRPLF/rippled/blob/develop/src/test/csf/README.md)
 (CSF). However, the CSF currently can only test the generic consensus algorithm
 as in the paper: [Analysis of the XRP Ledger Consensus
 Protocol](https://arxiv.org/abs/1802.07242).

docs/0001-negative-unl/negativeUNLSqDiagram.puml

@@ -4,7 +4,7 @@ skinparam sequenceArrowThickness 2
 skinparam roundcorner 20
 skinparam maxmessagesize 160
 
-actor "Rippled Start" as RS
+actor "Xrpld Start" as RS
 participant "Timer" as T
 participant "NetworkOPs" as NOP
 participant "ValidatorList" as VL #lightgreen

docs/Docker.md

@@ -1,5 +1,5 @@
-# `rippled` Docker Image
+# `xrpld` Docker Image
 
 - Some info relating to Docker containers can be found here: [../Builds/containers](../Builds/containers)
-- Images for building and testing rippled can be found here: [thejohnfreeman/rippled-docker](https://github.com/thejohnfreeman/rippled-docker/)
-  - These images do not have rippled. They have all the tools necessary to build rippled.
+- Images for building and testing xrpld can be found here: [thejohnfreeman/rippled-docker](https://github.com/thejohnfreeman/rippled-docker/)
+  - These images do not have xrpld. They have all the tools necessary to build xrpld.

docs/Doxyfile

@@ -2,7 +2,7 @@
 # Project related configuration options
 #---------------------------------------------------------------------------
 DOXYFILE_ENCODING      = UTF-8
-PROJECT_NAME           = "rippled"
+PROJECT_NAME           = "xrpld"
 PROJECT_NUMBER         =
 PROJECT_BRIEF          =
 PROJECT_LOGO           =

docs/HeapProfiling.md

@@ -1,4 +1,4 @@
-## Heap profiling of rippled with jemalloc
+## Heap profiling of xrpld with jemalloc
 
 The jemalloc library provides a good API for doing heap analysis,
 including a mechanism to dump a description of the heap from within the
@@ -7,26 +7,26 @@ activity in general, as well as how to acquire the software, are available on
 the jemalloc site:
 [https://github.com/jemalloc/jemalloc/wiki/Use-Case:-Heap-Profiling](https://github.com/jemalloc/jemalloc/wiki/Use-Case:-Heap-Profiling)
 
-jemalloc is acquired separately from rippled, and is not affiliated
+jemalloc is acquired separately from xrpld, and is not affiliated
 with Ripple Labs. If you compile and install jemalloc from the
 source release with default options, it will install the library and header
 under `/usr/local/lib` and `/usr/local/include`, respectively. Heap
-profiling has been tested with rippled on a Linux platform. It should
-work on platforms on which both rippled and jemalloc are available.
+profiling has been tested with xrpld on a Linux platform. It should
+work on platforms on which both xrpld and jemalloc are available.
 
-To link rippled with jemalloc, the argument
+To link xrpld with jemalloc, the argument
 `profile-jemalloc=<jemalloc_dir>` is provided after the optional target.
 The `<jemalloc_dir>` argument should be the same as that of the
 `--prefix` parameter passed to the jemalloc configure script when building.
 
 ## Examples:
 
-Build rippled with jemalloc library under /usr/local/lib and
+Build xrpld with jemalloc library under /usr/local/lib and
 header under /usr/local/include:
 
     $ scons profile-jemalloc=/usr/local
 
-Build rippled using clang with the jemalloc library under /opt/local/lib
+Build xrpld using clang with the jemalloc library under /opt/local/lib
 and header under /opt/local/include:
 
     $ scons clang profile-jemalloc=/opt/local

docs/README.md

@@ -1,61 +0,0 @@
-# Building documentation
-
-## Dependencies
-
-Install these dependencies:
-
-- [Doxygen](http://www.doxygen.nl): All major platforms have [official binary
-  distributions](http://www.doxygen.nl/download.html#srcbin), or you can
-  build from [source](http://www.doxygen.nl/download.html#srcbin).
-  - MacOS: We recommend installing via Homebrew: `brew install doxygen`.
-    The executable will be installed in `/usr/local/bin` which is already
-    in the default `PATH`.
-
-    If you use the official binary distribution, then you'll need to make
-    Doxygen available to your command line. You can do this by adding
-    a symbolic link from `/usr/local/bin` to the `doxygen` executable. For
-    example,
-
-    ```
-    $ ln -s /Applications/Doxygen.app/Contents/Resources/doxygen /usr/local/bin/doxygen
-    ```
-
-- [PlantUML](http://plantuml.com):
-  1. Install a functioning Java runtime, if you don't already have one.
-  2. Download [`plantuml.jar`](http://sourceforge.net/projects/plantuml/files/plantuml.jar/download).
-
-- [Graphviz](https://www.graphviz.org):
-  - Linux: Install from your package manager.
-  - Windows: Use an [official installer](https://graphviz.gitlab.io/_pages/Download/Download_windows.html).
-  - MacOS: Install via Homebrew: `brew install graphviz`.
-
-## Docker
-
-Instead of installing the above dependencies locally, you can use the official
-build environment Docker image, which has all of them installed already.
-
-1. Install [Docker](https://docs.docker.com/engine/installation/)
-2. Pull the image:
-
-```
-sudo docker pull rippleci/rippled-ci-builder:2944b78d22db
-```
-
-3. Run the image from the project folder:
-
-```
-sudo docker run -v $PWD:/opt/rippled --rm rippleci/rippled-ci-builder:2944b78d22db
-```
-
-## Build
-
-There is a `docs` target in the CMake configuration.
-
-```
-mkdir build
-cd build
-cmake -Donly_docs=ON ..
-cmake --build . --target docs --parallel
-```
-
-The output will be in `build/docs/html`.

docs/build/depend.md

@@ -20,7 +20,7 @@ CMakeToolchain
 
 ```
 # If you want to depend on a version of libxrpl that is not in ConanCenter,
-# then you can export the recipe from the rippled project.
+# then you can export the recipe from the xrpld project.
 conan export <path>
 ```
 
@@ -49,9 +49,9 @@ cmake --build . --parallel
 
 ## CMake subdirectory
 
-The second method adds the [rippled][] project as a CMake
+The second method adds the [xrpld][] project as a CMake
 [subdirectory][add_subdirectory].
-This method works well when you keep the rippled project as a Git
+This method works well when you keep the xrpld project as a Git
 [submodule][].
 It's good for when you want to make changes to libxrpl as part of your own
 project.
@@ -90,6 +90,6 @@ cmake --build . --parallel
 
 [add_subdirectory]: https://cmake.org/cmake/help/latest/command/add_subdirectory.html
 [submodule]: https://git-scm.com/book/en/v2/Git-Tools-Submodules
-[rippled]: https://github.com/ripple/rippled
+[xrpld]: https://github.com/XRPLF/rippled
 [Conan]: https://docs.conan.io/
 [CMake]: https://cmake.org/cmake/help/latest/

docs/build/environment.md

@@ -55,7 +55,7 @@ clang --version
 ### Install Xcode Specific Version (Optional)
 
 If you develop other applications using XCode you might be consistently updating to the newest version of Apple Clang.
-This will likely cause issues building rippled. You may want to install a specific version of Xcode:
+This will likely cause issues building xrpld. You may want to install a specific version of Xcode:
 
 1. **Download Xcode**
    - Visit [Apple Developer Downloads](https://developer.apple.com/download/more/)

docs/build/install.md

@@ -1,4 +1,4 @@
-This document contains instructions for installing rippled.
+This document contains instructions for installing xrpld.
 The APT package manager is common on Debian-based Linux distributions like
 Ubuntu,
 while the YUM package manager is common on Red Hat-based Linux distributions
@@ -8,7 +8,7 @@ and the only supported option for installing custom builds.
 
 ## From source
 
-From a source build, you can install rippled and libxrpl using CMake's
+From a source build, you can install xrpld and libxrpl using CMake's
 `--install` mode:
 
 ```
@@ -16,7 +16,7 @@ cmake --install . --prefix /opt/local
 ```
 
 The default [prefix][1] is typically `/usr/local` on Linux and macOS and
-`C:/Program Files/rippled` on Windows.
+`C:/Program Files/xrpld` on Windows.
 
 [1]: https://cmake.org/cmake/help/latest/variable/CMAKE_INSTALL_PREFIX.html
 
@@ -50,9 +50,9 @@ The default [prefix][1] is typically `/usr/local` on Linux and macOS and
 
     In particular, make sure that the fingerprint matches. (In the above example, the fingerprint is on the third line, starting with `C001`.)
 
-5.  Add the appropriate Ripple repository for your operating system version:
+5.  Add the appropriate XRPL repository for your operating system version:
 
-        echo "deb [signed-by=/usr/local/share/keyrings/ripple-key.gpg] https://repos.ripple.com/repos/rippled-deb focal stable" | \
+        echo "deb [signed-by=/usr/local/share/keyrings/ripple-key.gpg] https://repos.ripple.com/repos/xrpld-deb focal stable" | \
             sudo tee -a /etc/apt/sources.list.d/ripple.list
 
     The above example is appropriate for **Ubuntu 20.04 Focal Fossa**. For other operating systems, replace the word `focal` with one of the following:
@@ -61,33 +61,33 @@ The default [prefix][1] is typically `/usr/local` on Linux and macOS and
     - `bullseye` for **Debian 11 Bullseye**
     - `buster` for **Debian 10 Buster**
 
-    If you want access to development or pre-release versions of `rippled`, use one of the following instead of `stable`:
-    - `unstable` - Pre-release builds ([`release` branch](https://github.com/ripple/rippled/tree/release))
-    - `nightly` - Experimental/development builds ([`develop` branch](https://github.com/ripple/rippled/tree/develop))
+    If you want access to development or pre-release versions of `xrpld`, use one of the following instead of `stable`:
+    - `unstable` - Pre-release builds ([`release` branch](https://github.com/XRPLF/rippled/tree/release))
+    - `nightly` - Experimental/development builds ([`develop` branch](https://github.com/XRPLF/rippled/tree/develop))
 
     **Warning:** Unstable and nightly builds may be broken at any time. Do not use these builds for production servers.
 
-6.  Fetch the Ripple repository.
+6.  Fetch the XRPL repository.
 
         sudo apt -y update
 
-7.  Install the `rippled` software package:
+7.  Install the `xrpld` software package:
 
-        sudo apt -y install rippled
+        sudo apt -y install xrpld
 
-8.  Check the status of the `rippled` service:
+8.  Check the status of the `xrpld` service:
 
-        systemctl status rippled.service
+        systemctl status xrpld.service
 
-    The `rippled` service should start automatically. If not, you can start it manually:
+    The `xrpld` service should start automatically. If not, you can start it manually:
 
-        sudo systemctl start rippled.service
+        sudo systemctl start xrpld.service
 
-9.  Optional: allow `rippled` to bind to privileged ports.
+9.  Optional: allow `xrpld` to bind to privileged ports.
 
     This allows you to serve incoming API requests on port 80 or 443. (If you want to do so, you must also update the config file's port settings.)
 
-        sudo setcap 'cap_net_bind_service=+ep' /opt/ripple/bin/rippled
+        sudo setcap 'cap_net_bind_service=+ep' /opt/xrpld/bin/xrpld
 
 ## With the YUM package manager
 
@@ -106,8 +106,8 @@ The default [prefix][1] is typically `/usr/local` on Linux and macOS and
         enabled=1
         gpgcheck=0
         repo_gpgcheck=1
-        baseurl=https://repos.ripple.com/repos/rippled-rpm/stable/
-        gpgkey=https://repos.ripple.com/repos/rippled-rpm/stable/repodata/repomd.xml.key
+        baseurl=https://repos.ripple.com/repos/xrpld-rpm/stable/
+        gpgkey=https://repos.ripple.com/repos/xrpld-rpm/stable/repodata/repomd.xml.key
         REPOFILE
 
     _Unstable_
@@ -118,8 +118,8 @@ The default [prefix][1] is typically `/usr/local` on Linux and macOS and
         enabled=1
         gpgcheck=0
         repo_gpgcheck=1
-        baseurl=https://repos.ripple.com/repos/rippled-rpm/unstable/
-        gpgkey=https://repos.ripple.com/repos/rippled-rpm/unstable/repodata/repomd.xml.key
+        baseurl=https://repos.ripple.com/repos/xrpld-rpm/unstable/
+        gpgkey=https://repos.ripple.com/repos/xrpld-rpm/unstable/repodata/repomd.xml.key
         REPOFILE
 
     _Nightly_
@@ -130,22 +130,22 @@ The default [prefix][1] is typically `/usr/local` on Linux and macOS and
         enabled=1
         gpgcheck=0
         repo_gpgcheck=1
-        baseurl=https://repos.ripple.com/repos/rippled-rpm/nightly/
-        gpgkey=https://repos.ripple.com/repos/rippled-rpm/nightly/repodata/repomd.xml.key
+        baseurl=https://repos.ripple.com/repos/xrpld-rpm/nightly/
+        gpgkey=https://repos.ripple.com/repos/xrpld-rpm/nightly/repodata/repomd.xml.key
         REPOFILE
 
 2.  Fetch the latest repo updates:
 
         sudo yum -y update
 
-3.  Install the new `rippled` package:
+3.  Install the new `xrpld` package:
 
-        sudo yum install -y rippled
+        sudo yum install -y xrpld
 
-4.  Configure the `rippled` service to start on boot:
+4.  Configure the `xrpld` service to start on boot:
 
-        sudo systemctl enable rippled.service
+        sudo systemctl enable xrpld.service
 
-5.  Start the `rippled` service:
+5.  Start the `xrpld` service:
 
-        sudo systemctl start rippled.service
+        sudo systemctl start xrpld.service

docs/build/sanitizers.md

@@ -1,9 +1,9 @@
-# Sanitizer Configuration for Rippled
+# Sanitizer Configuration for Xrpld
 
 This document explains how to properly configure and run sanitizers (AddressSanitizer, undefinedbehaviorSanitizer, ThreadSanitizer) with the xrpld project.
 Corresponding suppression files are located in the `sanitizers/suppressions` directory.
 
-- [Sanitizer Configuration for Rippled](#sanitizer-configuration-for-rippled)
+- [Sanitizer Configuration for Xrpld](#sanitizer-configuration-for-xrpld)
   - [Building with Sanitizers](#building-with-sanitizers)
     - [Summary](#summary)
     - [Build steps:](#build-steps)
@@ -100,7 +100,7 @@ export LSAN_OPTIONS="include=sanitizers/suppressions/runtime-lsan-options.txt:su
 
 - Boost intrusive containers (used in `aged_unordered_container`) trigger false positives
 - Boost context switching (used in `Workers.cpp`) confuses ASAN's stack tracking
-- Since we usually don't build Boost (because we don't want to instrument Boost and detect issues in Boost code) with ASAN but use Boost containers in ASAN instrumented rippled code, it generates false positives.
+- Since we usually don't build Boost (because we don't want to instrument Boost and detect issues in Boost code) with ASAN but use Boost containers in ASAN instrumented xrpld code, it generates false positives.
 - Building dependencies with ASAN instrumentation reduces false positives. But we don't want to instrument dependencies like Boost with ASAN because it is slow (to compile as well as run tests) and not necessary.
 - See: https://github.com/google/sanitizers/wiki/AddressSanitizerContainerOverflow
 - More such flags are detailed [here](https://github.com/google/sanitizers/wiki/AddressSanitizerFlags)

docs/consensus.md

@@ -5,9 +5,9 @@
 Consensus is the task of reaching agreement within a distributed system in the
 presence of faulty or even malicious participants. This document outlines the
 [XRP Ledger Consensus Algorithm](https://arxiv.org/abs/1802.07242)
-as implemented in [rippled](https://github.com/ripple/rippled), but
+as implemented in [xrpld](https://github.com/XRPLF/rippled), but
 focuses on its utility as a generic consensus algorithm independent of the
-detailed mechanics of the Ripple Consensus Ledger. Most notably, the algorithm
+detailed mechanics of the XRPL consensus Ledger. Most notably, the algorithm
 does not require fully synchronous communication between all nodes in the
 network, or even a fixed network topology, but instead achieves consensus via
 collectively trusted subnetworks.
@@ -15,7 +15,7 @@ collectively trusted subnetworks.
 ## Distributed Agreement
 
 A challenge for distributed systems is reaching agreement on changes in shared
-state. For the Ripple network, the shared state is the current ledger--account
+state. For the XRPL network, the shared state is the current ledger--account
 information, account balances, order books and other financial data. We will
 refer to shared distributed state as a /ledger/ throughout the remainder of this
 document.
@@ -23,7 +23,7 @@ document.
 ![Ledger Chain](images/consensus/ledger_chain.png "Ledger Chain")
 
 As shown above, new ledgers are made by applying a set of transactions to the
-prior ledger. For the Ripple network, transactions include payments,
+prior ledger. For the XRPL network, transactions include payments,
 modification of account settings, updates to offers and more.
 
 In a centralized system, generating the next ledger is trivial since there is a
@@ -33,10 +33,10 @@ the set of transactions to include, the order to apply those transactions, and
 even the resulting ledger after applying the transactions. This is even more
 difficult when some participants are faulty or malicious.
 
-The Ripple network is a decentralized and **trust-full** network. Anyone is free
+The XRPL network is a decentralized and **trust-full** network. Anyone is free
 to join and participants are free to choose a subset of peers that are
 collectively trusted to not collude in an attempt to defraud the participant.
-Leveraging this network of trust, the Ripple algorithm has two main components.
+Leveraging this network of trust, the XRPL algorithm has two main components.
 
 - _Consensus_ in which network participants agree on the transactions to apply
   to a prior ledger, based on the positions of their chosen peers.
@@ -54,9 +54,9 @@ and was abandoned.
 
 The remainder of this section describes the Consensus and Validation algorithms
 in more detail and is meant as a companion guide to understanding the generic
-implementation in `rippled`. The document **does not** discuss correctness,
+implementation in `xrpld`. The document **does not** discuss correctness,
 fault-tolerance or liveness properties of the algorithms or the full details of
-how they integrate within `rippled` to support the Ripple Consensus Ledger.
+how they integrate within `xrpld` to support the XRPL consensus Ledger.
 
 ## Consensus Overview
 

external/README.md

@@ -1,6 +1,6 @@
 # External Conan recipes
 
-The subdirectories in this directory contain external libraries used by rippled.
+The subdirectories in this directory contain external libraries used by xrpld.
 
 | Folder           | Upstream                                                       | Description                                                                                  |
 | :--------------- | :------------------------------------------------------------- | :------------------------------------------------------------------------------------------- |

external/antithesis-sdk/CMakeLists.txt

@@ -1,11 +1,11 @@
 cmake_minimum_required(VERSION 3.18)
 
-# Note, version set explicitly by rippled project
+# Note, version set explicitly by xrpld project
 project(antithesis-sdk-cpp VERSION 0.4.4 LANGUAGES CXX)
 
 add_library(antithesis-sdk-cpp INTERFACE antithesis_sdk.h)
 
-# Note, both sections below created by rippled project
+# Note, both sections below created by xrpld project
 target_include_directories(antithesis-sdk-cpp INTERFACE
   $<INSTALL_INTERFACE:${CMAKE_INSTALL_INCLUDEDIR}>
   $<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}>

include/xrpl/basics/CountedObject.h

@@ -99,7 +99,7 @@ private:
     Derived classes have their instances counted automatically. This is used
     for reporting purposes.
 
-    @ingroup ripple_basics
+    @ingroup basics
 */
 template <class Object>
 class CountedObject

include/xrpl/basics/IntrusivePointer.h

@@ -59,7 +59,7 @@ concept CAdoptTag = std::is_same_v<T, SharedIntrusiveAdoptIncrementStrongTag> ||
     still retaining the reference counts. For example, for SHAMapInnerNodes the
     children may be reset in that function. Note that std::shared_pointer WILL
     run the destructor when the strong count reaches zero, but may not free the
-    memory used by the object until the weak count reaches zero. In rippled, we
+    memory used by the object until the weak count reaches zero. In xrpld, we
     typically allocate shared pointers with the `make_shared` function. When
     that is used, the memory is not reclaimed until the weak count reaches zero.
 */

include/xrpl/basics/IntrusiveRefCounts.h

@@ -33,7 +33,7 @@ enum class ReleaseWeakRefAction { noop, destroy };
 /** Implement the strong count, weak count, and bit flags for an intrusive
     pointer.
 
-    A class can satisfy the requirements of a xrpl::IntrusivePointer by
+    A class can satisfy the requirements of an xrpl::IntrusivePointer by
     inheriting from this class.
   */
 struct IntrusiveRefCounts

include/xrpl/basics/README.md

@@ -2,9 +2,9 @@
 
 Utility functions and classes.
 
-ripple/basic should contain no dependencies on other modules.
+The module xrpl/basics should contain no dependencies on other modules.
 
-# Choosing a rippled container.
+# Choosing an xrpld container.
 
 - `std::vector`
   - For ordered containers with most insertions or erases at the end.

include/xrpl/basics/UptimeClock.h

@@ -26,7 +26,7 @@ public:
     explicit UptimeClock() = default;
 
     static time_point
-    now();  // seconds since rippled program start
+    now();  // seconds since xrpld program start
 
 private:
     static std::atomic<rep> now_;

include/xrpl/basics/random.h

@@ -17,13 +17,13 @@ static_assert(
     // NOLINTNEXTLINE(misc-redundant-expression)
     std::is_integral<beast::xor_shift_engine::result_type>::value &&
         std::is_unsigned<beast::xor_shift_engine::result_type>::value,
-    "The Ripple default PRNG engine must return an unsigned integral type.");
+    "The XRPL default PRNG engine must return an unsigned integral type.");
 
 static_assert(
     // NOLINTNEXTLINE(misc-redundant-expression)
     std::numeric_limits<beast::xor_shift_engine::result_type>::max() >=
         std::numeric_limits<std::uint64_t>::max(),
-    "The Ripple default PRNG engine return must be at least 64 bits wide.");
+    "The XRPL default PRNG engine return must be at least 64 bits wide.");
 #endif
 
 namespace detail {

include/xrpl/ledger/ApplyView.h

@@ -213,11 +213,60 @@ public:
     // Called when a credit is made to an account
     // This is required to support PaymentSandbox
     virtual void
-    creditHook(
+    creditHookIOU(
         AccountID const& from,
         AccountID const& to,
         STAmount const& amount,
         STAmount const& preCreditBalance)
+    {
+        XRPL_ASSERT(amount.holds<Issue>(), "creditHookIOU: amount is for Issue");
+    }
+
+    virtual void
+    creditHookMPT(
+        AccountID const& from,
+        AccountID const& to,
+        STAmount const& amount,
+        std::uint64_t preCreditBalanceHolder,
+        std::int64_t preCreditBalanceIssuer)
+    {
+        XRPL_ASSERT(amount.holds<MPTIssue>(), "creditHookMPT: amount is for MPTIssue");
+    }
+
+    /** Facilitate tracking of MPT sold by an issuer owning MPT sell offer.
+     * Unlike IOU, MPT doesn't have bi-directional relationship with an issuer,
+     * where a trustline limits an amount that can be issued to a holder.
+     * Consequently, the credit step (last MPTEndpointStep or
+     * BookStep buying MPT) might temporarily overflow OutstandingAmount.
+     * Limiting of a step's output amount in this case is delegated to
+     * the next step (in rev order). The next step always redeems when a holder
+     * account sells MPT (first MPTEndpointStep or BookStep selling MPT).
+     * In this case the holder account is only limited by the step's output
+     * and it's available funds since it's transferring the funds from one
+     * account to another account and doesn't change OutstandingAmount.
+     * This doesn't apply to an offer owned by an issuer.
+     * In this case the issuer sells or self debits and is increasing
+     * OutstandingAmount. Ability to issue is limited by the issuer
+     * originally available funds less already self sold MPT amounts (MPT sell
+     * offer).
+     * Consider an example:
+     * - GW creates MPT(USD) with 1,000USD MaximumAmount.
+     * - GW pays 950USD to A1.
+     * - A1 creates an offer 100XRP(buy)/100USD(sell).
+     * - GW creates an offer 100XRP(buy)/100USD(sell).
+     * - A2 pays 200USD to A3 with sendMax of 200XRP.
+     * Since the payment engine executes payments in reverse,
+     * OutstandingAmount overflows in MPTEndpointStep: 950 + 200 = 1,150USD.
+     * BookStep first consumes A1 offer. This reduces OutstandingAmount
+     * by 100USD: 1,150 - 100 = 1,050USD. GW offer can only be partially
+     * consumed because the initial available amount is 50USD = 1,000 - 950.
+     * BookStep limits it's output to 150USD. This in turn limits A3's send
+     * amount to 150XRP: A1 buys 100XRP and sells 100USD to A3. This doesn't
+     * change OutstandingAmount. GW buys 50XRP and sells 50USD to A3. This
+     * changes OutstandingAmount to 1,000USD.
+     */
+    virtual void
+    issuerSelfDebitHookMPT(MPTIssue const& issue, std::uint64_t amount, std::int64_t origBalance)
     {
     }
 

include/xrpl/ledger/LedgerTiming.h

@@ -34,7 +34,7 @@ auto constexpr decreaseLedgerTimeResolutionEvery = 1;
 
 /** Calculates the close time resolution for the specified ledger.
 
-    The Ripple protocol uses binning to represent time intervals using only one
+    The XRPL protocol uses binning to represent time intervals using only one
     timestamp. This allows servers to derive a common time for the next ledger,
     without the need for perfectly synchronized clocks.
     The time resolution (i.e. the size of the intervals) is adjusted dynamically
@@ -62,7 +62,7 @@ getNextLedgerTimeResolution(
     bool previousAgree,
     Seq ledgerSeq)
 {
-    XRPL_ASSERT(ledgerSeq != Seq{0}, "ripple:getNextLedgerTimeResolution : valid ledger sequence");
+    XRPL_ASSERT(ledgerSeq != Seq{0}, "xrpl::getNextLedgerTimeResolution : valid ledger sequence");
 
     using namespace std::chrono;
     // Find the current resolution:
@@ -72,7 +72,7 @@ getNextLedgerTimeResolution(
         previousResolution);
     XRPL_ASSERT(
         iter != std::end(ledgerPossibleTimeResolutions),
-        "ripple:getNextLedgerTimeResolution : found time resolution");
+        "xrpl::getNextLedgerTimeResolution : found time resolution");
 
     // This should never happen, but just as a precaution
     if (iter == std::end(ledgerPossibleTimeResolutions))

include/xrpl/ledger/OrderBookDB.h

@@ -3,8 +3,8 @@
 #include <xrpl/ledger/AcceptedLedgerTx.h>
 #include <xrpl/ledger/BookListeners.h>
 #include <xrpl/ledger/ReadView.h>
+#include <xrpl/protocol/Asset.h>
 #include <xrpl/protocol/Book.h>
-#include <xrpl/protocol/Issue.h>
 #include <xrpl/protocol/MultiApiJson.h>
 #include <xrpl/protocol/UintTypes.h>
 
@@ -53,30 +53,30 @@ public:
         issue. This is useful for pathfinding to find all possible next hops
         from a given currency.
 
-        @param issue The issue to search for
+        @param asset The asset to search for
         @param domain Optional domain restriction for the order book
         @return Vector of books that want this issue
     */
     virtual std::vector<Book>
-    getBooksByTakerPays(Issue const& issue, std::optional<Domain> const& domain = std::nullopt) = 0;
+    getBooksByTakerPays(Asset const& asset, std::optional<Domain> const& domain = std::nullopt) = 0;
 
     /** Get the count of order books that want a specific issue.
 
-        @param issue The issue to search for
+        @param asset The asset to search for
         @param domain Optional domain restriction for the order book
         @return Number of books that want this issue
     */
     virtual int
-    getBookSize(Issue const& issue, std::optional<Domain> const& domain = std::nullopt) = 0;
+    getBookSize(Asset const& asset, std::optional<Domain> const& domain = std::nullopt) = 0;
 
     /** Check if an order book to XRP exists for the given issue.
 
-        @param issue The issue to check
+        @param asset The asset to check
         @param domain Optional domain restriction for the order book
         @return true if a book from this issue to XRP exists
     */
     virtual bool
-    isBookToXRP(Issue const& issue, std::optional<Domain> const& domain = std::nullopt) = 0;
+    isBookToXRP(Asset const& asset, std::optional<Domain> const& domain = std::nullopt) = 0;
 
     /**
      * Process a transaction for order book tracking.

include/xrpl/ledger/PaymentSandbox.h

@@ -15,10 +15,54 @@ namespace detail {
 //        into the PaymentSandbox class itself
 class DeferredCredits
 {
-public:
-    struct Adjustment
+private:
+    using KeyIOU = std::tuple<AccountID, AccountID, Currency>;
+    struct ValueIOU
     {
-        Adjustment(STAmount const& d, STAmount const& c, STAmount const& b)
+        explicit ValueIOU() = default;
+        STAmount lowAcctDebits;
+        STAmount highAcctDebits;
+        STAmount lowAcctOrigBalance;
+    };
+
+    struct HolderValueMPT
+    {
+        HolderValueMPT() = default;
+        // Debit to issuer
+        std::uint64_t debit = 0;
+        std::uint64_t origBalance = 0;
+    };
+
+    struct IssuerValueMPT
+    {
+        IssuerValueMPT() = default;
+        std::map<AccountID, HolderValueMPT> holders;
+        // Credit to holder
+        std::uint64_t credit = 0;
+        // OutstandingAmount might overflow when MPTs are credited to a holder.
+        // Consider A1 paying 100MPT to A2 and A1 already having maximum MPTs.
+        // Since the payment engine executes a payment in revers, A2 is
+        // credited first and OutstandingAmount is going to be equal
+        // to MaximumAmount + 100MPT. In the next step A1 redeems 100MPT
+        // to the issuer and OutstandingAmount balances out.
+        std::int64_t origBalance = 0;
+        // Self debit on offer selling MPT. Since the payment engine executes
+        // a payment in reverse, a crediting/buying step may overflow
+        // OutstandingAmount. A sell MPT offer owned by a holder can redeem any
+        // amount up to the offer's amount and holder's available funds,
+        // balancing out OutstandingAmount. But if the offer's owner is issuer
+        // then it issues more MPT. In this case the available amount to issue
+        // is the initial issuer's available amount less all offer sell amounts
+        // by the issuer. This is self-debit, where the offer's owner,
+        // issuer in this case, debits to self.
+        std::uint64_t selfDebit = 0;
+    };
+    using AdjustmentMPT = IssuerValueMPT;
+
+public:
+    struct AdjustmentIOU
+    {
+        AdjustmentIOU(STAmount const& d, STAmount const& c, STAmount const& b)
             : debits(d), credits(c), origBalance(b)
         {
         }
@@ -29,16 +73,30 @@ public:
 
     // Get the adjustments for the balance between main and other.
     // Returns the debits, credits and the original balance
-    std::optional<Adjustment>
-    adjustments(AccountID const& main, AccountID const& other, Currency const& currency) const;
+    std::optional<AdjustmentIOU>
+    adjustmentsIOU(AccountID const& main, AccountID const& other, Currency const& currency) const;
+
+    std::optional<AdjustmentMPT>
+    adjustmentsMPT(MPTID const& mptID) const;
 
     void
-    credit(
+    creditIOU(
         AccountID const& sender,
         AccountID const& receiver,
         STAmount const& amount,
         STAmount const& preCreditSenderBalance);
 
+    void
+    creditMPT(
+        AccountID const& sender,
+        AccountID const& receiver,
+        STAmount const& amount,
+        std::uint64_t preCreditBalanceHolder,
+        std::int64_t preCreditBalanceIssuer);
+
+    void
+    issuerSelfDebitMPT(MPTIssue const& issue, std::uint64_t amount, std::int64_t origBalance);
+
     void
     ownerCount(AccountID const& id, std::uint32_t cur, std::uint32_t next);
 
@@ -52,21 +110,11 @@ public:
     apply(DeferredCredits& to);
 
 private:
-    // lowAccount, highAccount
-    using Key = std::tuple<AccountID, AccountID, Currency>;
-    struct Value
-    {
-        explicit Value() = default;
+    static KeyIOU
+    makeKeyIOU(AccountID const& a1, AccountID const& a2, Currency const& currency);
 
-        STAmount lowAcctCredits;
-        STAmount highAcctCredits;
-        STAmount lowAcctOrigBalance;
-    };
-
-    static Key
-    makeKey(AccountID const& a1, AccountID const& a2, Currency const& c);
-
-    std::map<Key, Value> credits_;
+    std::map<KeyIOU, ValueIOU> creditsIOU_;
+    std::map<MPTID, IssuerValueMPT> creditsMPT_;
     std::map<AccountID, std::uint32_t> ownerCounts_;
 };
 
@@ -131,16 +179,35 @@ public:
     /** @} */
 
     STAmount
-    balanceHook(AccountID const& account, AccountID const& issuer, STAmount const& amount)
+    balanceHookIOU(AccountID const& account, AccountID const& issuer, STAmount const& amount)
         const override;
 
+    STAmount
+    balanceHookMPT(AccountID const& account, MPTIssue const& issue, std::int64_t amount)
+        const override;
+
+    STAmount
+    balanceHookSelfIssueMPT(MPTIssue const& issue, std::int64_t amount) const override;
+
     void
-    creditHook(
+    creditHookIOU(
         AccountID const& from,
         AccountID const& to,
         STAmount const& amount,
         STAmount const& preCreditBalance) override;
 
+    void
+    creditHookMPT(
+        AccountID const& from,
+        AccountID const& to,
+        STAmount const& amount,
+        std::uint64_t preCreditBalanceHolder,
+        std::int64_t preCreditBalanceIssuer) override;
+
+    void
+    issuerSelfDebitHookMPT(MPTIssue const& issue, std::uint64_t amount, std::int64_t origBalance)
+        override;
+
     void
     adjustOwnerCountHook(AccountID const& account, std::uint32_t cur, std::uint32_t next) override;
 
@@ -161,13 +228,6 @@ public:
     apply(PaymentSandbox& to);
     /** @} */
 
-    // Return a map of balance changes on trust lines. The low account is the
-    // first account in the key. If the two accounts are equal, the map contains
-    // the total changes in currency regardless of issuer. This is useful to get
-    // the total change in XRP balances.
-    std::map<std::tuple<AccountID, AccountID, Currency>, STAmount>
-    balanceChanges(ReadView const& view) const;
-
     XRPAmount
     xrpDestroyed() const;
 

include/xrpl/ledger/ReadView.h

@@ -148,15 +148,35 @@ public:
 
     // Accounts in a payment are not allowed to use assets acquired during that
     // payment. The PaymentSandbox tracks the debits, credits, and owner count
-    // changes that accounts make during a payment. `balanceHook` adjusts
+    // changes that accounts make during a payment. `balanceHookIOU` adjusts
     // balances so newly acquired assets are not counted toward the balance.
     // This is required to support PaymentSandbox.
     virtual STAmount
-    balanceHook(AccountID const& account, AccountID const& issuer, STAmount const& amount) const
+    balanceHookIOU(AccountID const& account, AccountID const& issuer, STAmount const& amount) const
     {
+        XRPL_ASSERT(amount.holds<Issue>(), "balanceHookIOU: amount is for Issue");
+
         return amount;
     }
 
+    // balanceHookMPT adjusts balances so newly acquired assets are not counted
+    // toward the balance.
+    virtual STAmount
+    balanceHookMPT(AccountID const& account, MPTIssue const& issue, std::int64_t amount) const
+    {
+        return STAmount{issue, amount};
+    }
+
+    // An offer owned by an issuer and selling MPT is limited by the issuer's
+    // funds available to issue, which are originally available funds less
+    // already self sold MPT amounts (MPT sell offer). This hook is used
+    // by issuerFundsToSelfIssue() function.
+    virtual STAmount
+    balanceHookSelfIssueMPT(MPTIssue const& issue, std::int64_t amount) const
+    {
+        return STAmount{issue, amount};
+    }
+
     // Accounts in a payment are not allowed to use assets acquired during that
     // payment. The PaymentSandbox tracks the debits, credits, and owner count
     // changes that accounts make during a payment. `ownerCountHook` adjusts the

include/xrpl/ledger/View.h

@@ -30,10 +30,10 @@ enum class SkipEntry : bool { No = false, Yes };
 /** Determines whether the given expiration time has passed.
 
     In the XRP Ledger, expiration times are defined as the number of whole
-    seconds after the "Ripple Epoch" which, for historical reasons, is set
+    seconds after the "XRPL epoch" which, for historical reasons, is set
     to January 1, 2000 (00:00 UTC).
 
-    This is like the way the Unix epoch works, except the Ripple Epoch is
+    This is like the way the Unix epoch works, except the XRPL epoch is
     precisely 946,684,800 seconds after the Unix Epoch.
 
     See https://xrpl.org/basic-data-types.html#specifying-time
@@ -63,8 +63,8 @@ isVaultPseudoAccountFrozen(
 isLPTokenFrozen(
     ReadView const& view,
     AccountID const& account,
-    Issue const& asset,
-    Issue const& asset2);
+    Asset const& asset,
+    Asset const& asset2);
 
 // Return the list of enabled amendments
 [[nodiscard]] std::set<uint256>

include/xrpl/ledger/helpers/AMMHelpers.h

@@ -1,8 +1,13 @@
 #pragma once
 
+#include <xrpl/basics/Expected.h>
 #include <xrpl/basics/Log.h>
 #include <xrpl/basics/Number.h>
 #include <xrpl/beast/utility/Journal.h>
+#include <xrpl/ledger/ReadView.h>
+#include <xrpl/ledger/Sandbox.h>
+#include <xrpl/ledger/helpers/RippleStateHelpers.h>
+#include <xrpl/ledger/helpers/TokenHelpers.h>
 #include <xrpl/protocol/AMMCore.h>
 #include <xrpl/protocol/AmountConversions.h>
 #include <xrpl/protocol/Feature.h>
@@ -11,6 +16,7 @@
 #include <xrpl/protocol/Quality.h>
 #include <xrpl/protocol/Rules.h>
 #include <xrpl/protocol/STAmount.h>
+#include <xrpl/protocol/STLedgerEntry.h>
 
 namespace xrpl {
 
@@ -36,7 +42,7 @@ enum class IsDeposit : bool { No = false, Yes = true };
  * @return LP Tokens as IOU
  */
 STAmount
-ammLPTokens(STAmount const& asset1, STAmount const& asset2, Issue const& lptIssue);
+ammLPTokens(STAmount const& asset1, STAmount const& asset2, Asset const& lptIssue);
 
 /** Calculate LP Tokens given asset's deposit amount.
  * @param asset1Balance current AMM asset1 balance
@@ -124,7 +130,8 @@ withinRelativeDistance(Quality const& calcQuality, Quality const& reqQuality, Nu
 template <typename Amt>
     requires(
         std::is_same_v<Amt, STAmount> || std::is_same_v<Amt, IOUAmount> ||
-        std::is_same_v<Amt, XRPAmount> || std::is_same_v<Amt, Number>)
+        std::is_same_v<Amt, XRPAmount> || std::is_same_v<Amt, MPTAmount> ||
+        std::is_same_v<Amt, Number>)
 bool
 withinRelativeDistance(Amt const& calc, Amt const& req, Number const& dist)
 {
@@ -195,7 +202,7 @@ getAMMOfferStartWithTakerGets(
         // Round downward to minimize the offer and to maximize the quality.
         // This has the most impact when takerGets is XRP.
         auto const takerGets =
-            toAmount<TOut>(getIssue(pool.out), nTakerGetsProposed, Number::downward);
+            toAmount<TOut>(getAsset(pool.out), nTakerGetsProposed, Number::downward);
         return TAmounts<TIn, TOut>{swapAssetOut(pool, takerGets, tfee), takerGets};
     };
 
@@ -262,7 +269,7 @@ getAMMOfferStartWithTakerPays(
         // Round downward to minimize the offer and to maximize the quality.
         // This has the most impact when takerPays is XRP.
         auto const takerPays =
-            toAmount<TIn>(getIssue(pool.in), nTakerPaysProposed, Number::downward);
+            toAmount<TIn>(getAsset(pool.in), nTakerPaysProposed, Number::downward);
         return TAmounts<TIn, TOut>{takerPays, swapAssetIn(pool, takerPays, tfee)};
     };
 
@@ -331,7 +338,7 @@ changeSpotPriceQuality(
                                 << " " << to_string(pool.out) << " " << quality << " " << tfee;
                 return std::nullopt;
             }
-            auto const takerPays = toAmount<TIn>(getIssue(pool.in), nTakerPays, Number::upward);
+            auto const takerPays = toAmount<TIn>(getAsset(pool.in), nTakerPays, Number::upward);
             // should not fail
             if (auto amounts = TAmounts<TIn, TOut>{takerPays, swapAssetIn(pool, takerPays, tfee)};
                 Quality{amounts} < quality &&
@@ -360,7 +367,7 @@ changeSpotPriceQuality(
     // Generate the offer starting with XRP side. Return seated offer amounts
     // if the offer can be generated, otherwise nullopt.
     auto amounts = [&]() {
-        if (isXRP(getIssue(pool.out)))
+        if (isXRP(getAsset(pool.out)))
             return getAMMOfferStartWithTakerGets(pool, quality, tfee);
         return getAMMOfferStartWithTakerPays(pool, quality, tfee);
     }();
@@ -445,7 +452,7 @@ swapAssetIn(TAmounts<TIn, TOut> const& pool, TIn const& assetIn, std::uint16_t t
         auto const denom = pool.in + assetIn * (1 - fee);
 
         if (denom.signum() <= 0)
-            return toAmount<TOut>(getIssue(pool.out), 0);
+            return toAmount<TOut>(getAsset(pool.out), 0);
 
         Number::setround(Number::upward);
         auto const ratio = numerator / denom;
@@ -454,14 +461,14 @@ swapAssetIn(TAmounts<TIn, TOut> const& pool, TIn const& assetIn, std::uint16_t t
         auto const swapOut = pool.out - ratio;
 
         if (swapOut.signum() < 0)
-            return toAmount<TOut>(getIssue(pool.out), 0);
+            return toAmount<TOut>(getAsset(pool.out), 0);
 
-        return toAmount<TOut>(getIssue(pool.out), swapOut, Number::downward);
+        return toAmount<TOut>(getAsset(pool.out), swapOut, Number::downward);
     }
     else
     {
         return toAmount<TOut>(
-            getIssue(pool.out),
+            getAsset(pool.out),
             pool.out - (pool.in * pool.out) / (pool.in + assetIn * feeMult(tfee)),
             Number::downward);
     }
@@ -508,7 +515,7 @@ swapAssetOut(TAmounts<TIn, TOut> const& pool, TOut const& assetOut, std::uint16_
         auto const denom = pool.out - assetOut;
         if (denom.signum() <= 0)
         {
-            return toMaxAmount<TIn>(getIssue(pool.in));
+            return toMaxAmount<TIn>(getAsset(pool.in));
         }
 
         Number::setround(Number::upward);
@@ -522,14 +529,14 @@ swapAssetOut(TAmounts<TIn, TOut> const& pool, TOut const& assetOut, std::uint16_
         Number::setround(Number::upward);
         auto const swapIn = numerator2 / feeMult;
         if (swapIn.signum() < 0)
-            return toAmount<TIn>(getIssue(pool.in), 0);
+            return toAmount<TIn>(getAsset(pool.in), 0);
 
-        return toAmount<TIn>(getIssue(pool.in), swapIn, Number::upward);
+        return toAmount<TIn>(getAsset(pool.in), swapIn, Number::upward);
     }
     else
     {
         return toAmount<TIn>(
-            getIssue(pool.in),
+            getAsset(pool.in),
             ((pool.in * pool.out) / (pool.out - assetOut) - pool.in) / feeMult(tfee),
             Number::upward);
     }
@@ -616,9 +623,9 @@ getRoundedAsset(Rules const& rules, STAmount const& balance, A const& frac, IsDe
     if (!rules.enabled(fixAMMv1_3))
     {
         if constexpr (std::is_same_v<A, STAmount>)
-            return multiply(balance, frac, balance.issue());
+            return multiply(balance, frac, balance.asset());
         else
-            return toSTAmount(balance.issue(), balance * frac);
+            return toSTAmount(balance.asset(), balance * frac);
     }
     auto const rm = detail::getAssetRounding(isDeposit);
     return multiply(balance, frac, rm);
@@ -712,4 +719,94 @@ adjustFracByTokens(
     STAmount const& tokens,
     Number const& frac);
 
+/** Get AMM pool balances.
+ */
+std::pair<STAmount, STAmount>
+ammPoolHolds(
+    ReadView const& view,
+    AccountID const& ammAccountID,
+    Asset const& asset1,
+    Asset const& asset2,
+    FreezeHandling freezeHandling,
+    AuthHandling authHandling,
+    beast::Journal const j);
+
+/** Get AMM pool and LP token balances. If both optIssue are
+ * provided then they are used as the AMM token pair issues.
+ * Otherwise the missing issues are fetched from ammSle.
+ */
+Expected<std::tuple<STAmount, STAmount, STAmount>, TER>
+ammHolds(
+    ReadView const& view,
+    SLE const& ammSle,
+    std::optional<Asset> const& optAsset1,
+    std::optional<Asset> const& optAsset2,
+    FreezeHandling freezeHandling,
+    AuthHandling authHandling,
+    beast::Journal const j);
+
+/** Get the balance of LP tokens.
+ */
+STAmount
+ammLPHolds(
+    ReadView const& view,
+    Asset const& asset1,
+    Asset const& asset2,
+    AccountID const& ammAccount,
+    AccountID const& lpAccount,
+    beast::Journal const j);
+
+STAmount
+ammLPHolds(
+    ReadView const& view,
+    SLE const& ammSle,
+    AccountID const& lpAccount,
+    beast::Journal const j);
+
+/** Get AMM trading fee for the given account. The fee is discounted
+ * if the account is the auction slot owner or one of the slot's authorized
+ * accounts.
+ */
+std::uint16_t
+getTradingFee(ReadView const& view, SLE const& ammSle, AccountID const& account);
+
+/** Returns total amount held by AMM for the given token.
+ */
+STAmount
+ammAccountHolds(ReadView const& view, AccountID const& ammAccountID, Asset const& asset);
+
+/** Delete trustlines to AMM. If all trustlines are deleted then
+ * AMM object and account are deleted. Otherwise tecINCOMPLETE is returned.
+ */
+TER
+deleteAMMAccount(Sandbox& view, Asset const& asset, Asset const& asset2, beast::Journal j);
+
+/** Initialize Auction and Voting slots and set the trading/discounted fee.
+ */
+void
+initializeFeeAuctionVote(
+    ApplyView& view,
+    std::shared_ptr<SLE>& ammSle,
+    AccountID const& account,
+    Asset const& lptAsset,
+    std::uint16_t tfee);
+
+/** Return true if the Liquidity Provider is the only AMM provider, false
+ * otherwise. Return tecINTERNAL if encountered an unexpected condition,
+ * for instance Liquidity Provider has more than one LPToken trustline.
+ */
+Expected<bool, TER>
+isOnlyLiquidityProvider(ReadView const& view, Issue const& ammIssue, AccountID const& lpAccount);
+
+/** Due to rounding, the LPTokenBalance of the last LP might
+ * not match the LP's trustline balance. If it's within the tolerance,
+ * update LPTokenBalance to match the LP's trustline balance.
+ */
+Expected<bool, TER>
+verifyAndAdjustLPTokenBalance(
+    Sandbox& sb,
+    STAmount const& lpTokens,
+    std::shared_ptr<SLE>& ammSle,
+    AccountID const& account);
+
 }  // namespace xrpl

include/xrpl/ledger/helpers/EscrowHelpers.h

@@ -10,7 +10,6 @@
 #include <xrpl/protocol/Indexes.h>
 #include <xrpl/protocol/MPTAmount.h>
 #include <xrpl/protocol/Rate.h>
-#include <xrpl/tx/transactors/token/MPTokenAuthorize.h>
 
 namespace xrpl {
 
@@ -42,7 +41,8 @@ escrowUnlockApplyHelper<Issue>(
     bool createAsset,
     beast::Journal journal)
 {
-    Keylet const trustLineKey = keylet::line(receiver, amount.issue());
+    Issue const& issue = amount.get<Issue>();
+    Keylet const trustLineKey = keylet::line(receiver, issue);
     bool const recvLow = issuer > receiver;
     bool const senderIssuer = issuer == sender;
     bool const receiverIssuer = issuer == receiver;
@@ -65,9 +65,9 @@ escrowUnlockApplyHelper<Issue>(
             return tecNO_LINE_INSUF_RESERVE;
         }
 
-        Currency const currency = amount.getCurrency();
-        STAmount initialBalance(amount.issue());
-        initialBalance.setIssuer(noAccount());
+        Currency const currency = issue.currency;
+        STAmount initialBalance(issue);
+        initialBalance.get<Issue>().account = noAccount();
 
         if (TER const ter = trustCreate(
                 view,                                           // payment sandbox
@@ -114,7 +114,8 @@ escrowUnlockApplyHelper<Issue>(
     if ((!senderIssuer && !receiverIssuer) && lockedRate != parityRate)
     {
         // compute transfer fee, if any
-        auto const xferFee = amount.value() - divideRound(amount, lockedRate, amount.issue(), true);
+        auto const xferFee =
+            amount.value() - divideRound(amount, lockedRate, amount.get<Issue>(), true);
         // compute balance to transfer
         finalAmt = amount.value() - xferFee;
     }
@@ -149,7 +150,7 @@ escrowUnlockApplyHelper<Issue>(
     // if destination is not the issuer then transfer funds
     if (!receiverIssuer)
     {
-        auto const ter = rippleCredit(view, issuer, receiver, finalAmt, true, journal);
+        auto const ter = directSendNoFee(view, issuer, receiver, finalAmt, true, journal);
         if (!isTesSuccess(ter))
             return ter;  // LCOV_EXCL_LINE
     }
@@ -183,8 +184,7 @@ escrowUnlockApplyHelper<MPTIssue>(
             return tecINSUFFICIENT_RESERVE;
         }
 
-        if (auto const ter = MPTokenAuthorize::createMPToken(view, mptID, receiver, 0);
-            !isTesSuccess(ter))
+        if (auto const ter = createMPToken(view, mptID, receiver, 0); !isTesSuccess(ter))
         {
             return ter;  // LCOV_EXCL_LINE
         }
@@ -218,7 +218,7 @@ escrowUnlockApplyHelper<MPTIssue>(
         // compute balance to transfer
         finalAmt = amount.value() - xferFee;
     }
-    return rippleUnlockEscrowMPT(
+    return unlockEscrowMPT(
         view,
         sender,
         receiver,

include/xrpl/ledger/helpers/MPTokenHelpers.h

@@ -80,6 +80,7 @@ authorizeMPToken(
  * requireAuth check is recursive for MPT shares in a vault, descending to
  * assets in the vault, up to maxAssetCheckDepth recursion depth. This is
  * purely defensive, as we currently do not allow such vaults to be created.
+ * WeakAuth intentionally allows missing MPTokens under MPToken V2.
  */
 [[nodiscard]] TER
 requireAuth(
@@ -114,6 +115,12 @@ canTransfer(
     AccountID const& from,
     AccountID const& to);
 
+/** Check if Asset can be traded on DEX. return tecNO_PERMISSION
+ * if it doesn't and tesSUCCESS otherwise.
+ */
+[[nodiscard]] TER
+canTrade(ReadView const& view, Asset const& asset);
+
 //------------------------------------------------------------------------------
 //
 // Empty holding operations (MPT-specific)
@@ -142,14 +149,14 @@ removeEmptyHolding(
 //------------------------------------------------------------------------------
 
 TER
-rippleLockEscrowMPT(
+lockEscrowMPT(
     ApplyView& view,
     AccountID const& uGrantorID,
     STAmount const& saAmount,
     beast::Journal j);
 
 TER
-rippleUnlockEscrowMPT(
+unlockEscrowMPT(
     ApplyView& view,
     AccountID const& uGrantorID,
     AccountID const& uGranteeID,
@@ -157,4 +164,80 @@ rippleUnlockEscrowMPT(
     STAmount const& grossAmount,
     beast::Journal j);
 
+TER
+createMPToken(
+    ApplyView& view,
+    MPTID const& mptIssuanceID,
+    AccountID const& account,
+    std::uint32_t const flags);
+
+TER
+checkCreateMPT(
+    xrpl::ApplyView& view,
+    xrpl::MPTIssue const& mptIssue,
+    xrpl::AccountID const& holder,
+    beast::Journal j);
+
+//------------------------------------------------------------------------------
+//
+// MPT Overflow related
+//
+//------------------------------------------------------------------------------
+
+// MaximumAmount doesn't exceed 2**63-1
+std::int64_t
+maxMPTAmount(SLE const& sleIssuance);
+
+// OutstandingAmount may overflow and available amount might be negative.
+// But available amount is always <= |MaximumAmount - OutstandingAmount|.
+std::int64_t
+availableMPTAmount(SLE const& sleIssuance);
+
+std::int64_t
+availableMPTAmount(ReadView const& view, MPTID const& mptID);
+
+/** Checks for two types of OutstandingAmount overflow during a send operation.
+ * 1.  **Direct directSendNoFee (Overflow: No):** A true overflow check when
+ * `OutstandingAmount > MaximumAmount`. This threshold is used for direct
+ * directSendNoFee transactions that bypass the payment engine.
+ * 2.  **accountSend & Payment Engine (Overflow: Yes):** A temporary overflow
+ * check when `OutstandingAmount > UINT64_MAX`. This higher threshold is used
+ * for `accountSend` and payments processed via the payment engine.
+ */
+bool
+isMPTOverflow(
+    std::int64_t sendAmount,
+    std::uint64_t outstandingAmount,
+    std::int64_t maximumAmount,
+    AllowMPTOverflow allowOverflow);
+
+/**
+ * Determine funds available for an issuer to sell in an issuer owned offer.
+ * Issuing step, which could be either MPTEndPointStep last step or BookStep's
+ * TakerPays may overflow OutstandingAmount. Redeeming step, in BookStep's
+ * TakerGets redeems the offer's owner funds, essentially balancing out
+ * the overflow, unless the offer's owner is the issuer.
+ */
+[[nodiscard]] STAmount
+issuerFundsToSelfIssue(ReadView const& view, MPTIssue const& issue);
+
+/** Facilitate tracking of MPT sold by an issuer owning MPT sell offer.
+ * See ApplyView::issuerSelfDebitHookMPT().
+ */
+void
+issuerSelfDebitHookMPT(ApplyView& view, MPTIssue const& issue, std::uint64_t amount);
+
+//------------------------------------------------------------------------------
+//
+// MPT DEX
+//
+//------------------------------------------------------------------------------
+
+/* Return true if a transaction is allowed for the specified MPT/account. The
+ * function checks MPTokenIssuance and MPToken objects flags to determine if the
+ * transaction is allowed.
+ */
+TER
+checkMPTTxAllowed(ReadView const& v, TxType tx, Asset const& asset, AccountID const& accountID);
+
 }  // namespace xrpl

include/xrpl/ledger/helpers/NFTokenHelpers.h

@@ -1,12 +1,12 @@
 #pragma once
 
+#include <xrpl/basics/Log.h>
 #include <xrpl/basics/base_uint.h>
 #include <xrpl/ledger/ApplyView.h>
 #include <xrpl/protocol/AccountID.h>
 #include <xrpl/protocol/TER.h>
 #include <xrpl/protocol/TxFlags.h>
 #include <xrpl/protocol/nft.h>
-#include <xrpl/tx/Transactor.h>
 
 namespace xrpl {
 

include/xrpl/ledger/helpers/RippleStateHelpers.h

@@ -252,4 +252,14 @@ deleteAMMTrustLine(
     std::optional<AccountID> const& ammAccountID,
     beast::Journal j);
 
+/** Delete AMMs MPToken. The passed `sle` must be obtained from a prior
+ * call to view.peek().
+ */
+[[nodiscard]] TER
+deleteAMMMPToken(
+    ApplyView& view,
+    std::shared_ptr<SLE> sleMPT,
+    AccountID const& ammAccountID,
+    beast::Journal j);
+
 }  // namespace xrpl

include/xrpl/ledger/helpers/TokenHelpers.h

@@ -31,6 +31,9 @@ enum SpendableHandling { shSIMPLE_BALANCE, shFULL_BALANCE };
 
 enum class WaiveTransferFee : bool { No = false, Yes };
 
+/** Controls whether accountSend is allowed to overflow OutstandingAmount **/
+enum class AllowMPTOverflow : bool { No = false, Yes };
+
 /* Check if MPToken (for MPT) or trust line (for IOU) exists:
  * - StrongAuth - before checking if authorization is required
  * - WeakAuth
@@ -176,6 +179,16 @@ accountFunds(
     FreezeHandling freezeHandling,
     beast::Journal j);
 
+// Overload with AuthHandling to support IOU and MPT.
+[[nodiscard]] STAmount
+accountFunds(
+    ReadView const& view,
+    AccountID const& id,
+    STAmount const& saDefault,
+    FreezeHandling freezeHandling,
+    AuthHandling authHandling,
+    beast::Journal j);
+
 /** Returns the transfer fee as Rate based on the type of token
  * @param view The ledger view
  * @param amount The amount to transfer
@@ -235,11 +248,11 @@ canTransfer(ReadView const& view, Asset const& asset, AccountID const& from, Acc
 // --> bCheckIssuer : normally require issuer to be involved.
 // [[nodiscard]] // nodiscard commented out so DirectStep.cpp compiles.
 
-/** Calls static rippleCreditIOU if saAmount represents Issue.
- * Calls static rippleCreditMPT if saAmount represents MPTIssue.
+/** Calls static directSendNoFeeIOU if saAmount represents Issue.
+ * Calls static directSendNoFeeMPT if saAmount represents MPTIssue.
  */
 TER
-rippleCredit(
+directSendNoFee(
     ApplyView& view,
     AccountID const& uSenderID,
     AccountID const& uReceiverID,
@@ -257,7 +270,8 @@ accountSend(
     AccountID const& to,
     STAmount const& saAmount,
     beast::Journal j,
-    WaiveTransferFee waiveFee = WaiveTransferFee::No);
+    WaiveTransferFee waiveFee = WaiveTransferFee::No,
+    AllowMPTOverflow allowOverflow = AllowMPTOverflow::No);
 
 using MultiplePaymentDestinations = std::vector<std::pair<AccountID, Number>>;
 /** Like accountSend, except one account is sending multiple payments (with the

include/xrpl/nodestore/README.md

@@ -51,7 +51,7 @@ A blob containing the payload. Stored in the following format.
 ---
 
 The `NodeStore` provides an interface that stores, in a persistent database, a
-collection of NodeObjects that rippled uses as its primary representation of
+collection of NodeObjects that xrpld uses as its primary representation of
 ledger entries. All ledger entries are stored as NodeObjects and as such, need
 to be persisted between launches. If a NodeObject is accessed and is not in
 memory, it will be retrieved from the database.
@@ -110,7 +110,7 @@ The `NodeStore.Timing` test is used to execute a set of read/write workloads to
 compare current available nodestore backends. It can be executed with:
 
 ```
-$rippled --unittest=NodeStoreTiming
+$xrpld --unittest=NodeStoreTiming
 ```
 
 It is also possible to use alternate DB config params by passing config strings
@@ -143,10 +143,10 @@ Through various executions and profiling some conclusions are presented below.
   just after ledger close, then that would provide similar, but more predictable
   guarantees. It would also remove an unneeded thread and unnecessary memory
   usage. An alternative point of view is that because there will always be many
-  other rippled instances running there is no need for such guarantees. The nodes
+  other xrpld instances running there is no need for such guarantees. The nodes
   will always be available from another peer.
 
-- Lookup in a block was previously using binary search. With rippled's use case
+- Lookup in a block was previously using binary search. With xrpld's use case
   it is highly unlikely that two adjacent key/values will ever be requested one
   after the other. Therefore hash indexing of blocks makes much more sense.
   Rocksdb has a number of options for hash indexing both memtables and blocks and

include/xrpl/proto/org/xrpl/rpc/v1/README.md

@@ -1,8 +1,8 @@
 # Protocol buffer definitions for gRPC
 
-This folder contains the protocol buffer definitions used by the rippled gRPC API.
+This folder contains the protocol buffer definitions used by the xrpld gRPC API.
 The gRPC API attempts to mimic the JSON/Websocket API as much as possible.
-As of April 2020, the gRPC API supports a subset of the full rippled API:
+As of April 2020, the gRPC API supports a subset of the full xrpld API:
 tx, account_tx, account_info, fee and submit.
 
 ### Making Changes
@@ -63,7 +63,7 @@ templated `CallData` class in GRPCServerImpl::setupListeners(). The template
 parameters should be the request type and the response type.
 
 Finally, define the handler itself in the appropriate file under the
-src/ripple/rpc/handlers folder. If the method already has a JSON/Websocket
+src/xrpld/rpc/handlers folder. If the method already has a JSON/Websocket
 equivalent, write the gRPC handler in the same file, and abstract common logic
 into helper functions (see Tx.cpp or AccountTx.cpp for an example).
 

include/xrpl/proto/xrpl.proto

@@ -36,7 +36,7 @@ enum MessageType {
 
 /* Provides the current ephemeral key for a validator. */
 message TMManifest {
-  // A Manifest object in the Ripple serialization format.
+  // A Manifest object in the XRPL serialization format.
   required bytes stobject = 1;
 }
 

include/xrpl/protocol/AMMCore.h

@@ -2,7 +2,7 @@
 
 #include <xrpl/basics/Number.h>
 #include <xrpl/protocol/AccountID.h>
-#include <xrpl/protocol/Issue.h>
+#include <xrpl/protocol/Asset.h>
 #include <xrpl/protocol/TER.h>
 #include <xrpl/protocol/UintTypes.h>
 
@@ -31,12 +31,12 @@ class Rules;
 /** Calculate Liquidity Provider Token (LPT) Currency.
  */
 Currency
-ammLPTCurrency(Currency const& cur1, Currency const& cur2);
+ammLPTCurrency(Asset const& asset1, Asset const& asset2);
 
 /** Calculate LPT Issue from AMM asset pair.
  */
 Issue
-ammLPTIssue(Currency const& cur1, Currency const& cur2, AccountID const& ammAccountID);
+ammLPTIssue(Asset const& asset1, Asset const& asset2, AccountID const& ammAccountID);
 
 /** Validate the amount.
  * If validZero is false and amount is beast::zero then invalid amount.
@@ -46,19 +46,19 @@ ammLPTIssue(Currency const& cur1, Currency const& cur2, AccountID const& ammAcco
 NotTEC
 invalidAMMAmount(
     STAmount const& amount,
-    std::optional<std::pair<Issue, Issue>> const& pair = std::nullopt,
+    std::optional<std::pair<Asset, Asset>> const& pair = std::nullopt,
     bool validZero = false);
 
 NotTEC
 invalidAMMAsset(
-    Issue const& issue,
-    std::optional<std::pair<Issue, Issue>> const& pair = std::nullopt);
+    Asset const& asset,
+    std::optional<std::pair<Asset, Asset>> const& pair = std::nullopt);
 
 NotTEC
 invalidAMMAssetPair(
-    Issue const& issue1,
-    Issue const& issue2,
-    std::optional<std::pair<Issue, Issue>> const& pair = std::nullopt);
+    Asset const& asset1,
+    Asset const& asset2,
+    std::optional<std::pair<Asset, Asset>> const& pair = std::nullopt);
 
 /** Get time slot of the auction slot.
  */

include/xrpl/protocol/AccountID.h

@@ -2,7 +2,7 @@
 
 #include <xrpl/protocol/tokens.h>
 // VFALCO Uncomment when the header issues are resolved
-// #include <ripple/protocol/PublicKey.h>
+// #include <xrpl/protocol/PublicKey.h>
 #include <xrpl/basics/UnorderedContainers.h>
 #include <xrpl/basics/base_uint.h>
 #include <xrpl/json/json_value.h>

include/xrpl/protocol/AmountConversions.h

@@ -1,6 +1,7 @@
 #pragma once
 
 #include <xrpl/protocol/IOUAmount.h>
+#include <xrpl/protocol/Protocol.h>
 #include <xrpl/protocol/STAmount.h>
 #include <xrpl/protocol/XRPAmount.h>
 
@@ -9,11 +10,12 @@
 namespace xrpl {
 
 inline STAmount
-toSTAmount(IOUAmount const& iou, Issue const& iss)
+toSTAmount(IOUAmount const& iou, Asset const& asset)
 {
+    XRPL_ASSERT(asset.holds<Issue>(), "xrpl::toSTAmount : is Issue");
     bool const isNeg = iou.signum() < 0;
     std::uint64_t const umant = isNeg ? -iou.mantissa() : iou.mantissa();
-    return STAmount(iss, umant, iou.exponent(), isNeg, STAmount::unchecked());
+    return STAmount(asset, umant, iou.exponent(), isNeg, STAmount::unchecked());
 }
 
 inline STAmount
@@ -31,12 +33,25 @@ toSTAmount(XRPAmount const& xrp)
 }
 
 inline STAmount
-toSTAmount(XRPAmount const& xrp, Issue const& iss)
+toSTAmount(XRPAmount const& xrp, Asset const& asset)
 {
-    XRPL_ASSERT(isXRP(iss.account) && isXRP(iss.currency), "xrpl::toSTAmount : is XRP");
+    XRPL_ASSERT(isXRP(asset), "xrpl::toSTAmount : is XRP");
     return toSTAmount(xrp);
 }
 
+inline STAmount
+toSTAmount(MPTAmount const& mpt)
+{
+    return STAmount(mpt, noMPT());
+}
+
+inline STAmount
+toSTAmount(MPTAmount const& mpt, Asset const& asset)
+{
+    XRPL_ASSERT(asset.holds<MPTIssue>(), "xrpl::toSTAmount : is MPT");
+    return STAmount(mpt, asset.get<MPTIssue>());
+}
+
 template <class T>
 T
 toAmount(STAmount const& amt) = delete;
@@ -76,6 +91,21 @@ toAmount<XRPAmount>(STAmount const& amt)
     return XRPAmount(sMant);
 }
 
+template <>
+inline MPTAmount
+toAmount<MPTAmount>(STAmount const& amt)
+{
+    XRPL_ASSERT(
+        amt.holds<MPTIssue>() && amt.mantissa() <= maxMPTokenAmount && amt.exponent() == 0,
+        "xrpl::toAmount<MPTAmount> : maximum mantissa");
+    if (amt.mantissa() > maxMPTokenAmount || amt.exponent() != 0)
+        Throw<std::runtime_error>("toAmount<MPTAmount>: invalid mantissa or exponent");
+    bool const isNeg = amt.negative();
+    std::int64_t const sMant = isNeg ? -std::int64_t(amt.mantissa()) : amt.mantissa();
+
+    return MPTAmount(sMant);
+}
+
 template <class T>
 T
 toAmount(IOUAmount const& amt) = delete;
@@ -98,23 +128,36 @@ toAmount<XRPAmount>(XRPAmount const& amt)
     return amt;
 }
 
+template <class T>
+T
+toAmount(MPTAmount const& amt) = delete;
+
+template <>
+inline MPTAmount
+toAmount<MPTAmount>(MPTAmount const& amt)
+{
+    return amt;
+}
+
 template <typename T>
 T
-toAmount(Issue const& issue, Number const& n, Number::rounding_mode mode = Number::getround())
+toAmount(Asset const& asset, Number const& n, Number::rounding_mode mode = Number::getround())
 {
     saveNumberRoundMode const rm(Number::getround());
-    if (isXRP(issue))
+    if (isXRP(asset))
         Number::setround(mode);
 
     if constexpr (std::is_same_v<IOUAmount, T>)
         return IOUAmount(n);
     else if constexpr (std::is_same_v<XRPAmount, T>)
         return XRPAmount(static_cast<std::int64_t>(n));
+    else if constexpr (std::is_same_v<MPTAmount, T>)
+        return MPTAmount(static_cast<std::int64_t>(n));
     else if constexpr (std::is_same_v<STAmount, T>)
     {
-        if (isXRP(issue))
-            return STAmount(issue, static_cast<std::int64_t>(n));
-        return STAmount(issue, n);
+        if (isXRP(asset))
+            return STAmount(asset, static_cast<std::int64_t>(n));
+        return STAmount(asset, n);
     }
     else
     {
@@ -125,17 +168,23 @@ toAmount(Issue const& issue, Number const& n, Number::rounding_mode mode = Numbe
 
 template <typename T>
 T
-toMaxAmount(Issue const& issue)
+toMaxAmount(Asset const& asset)
 {
     if constexpr (std::is_same_v<IOUAmount, T>)
         return IOUAmount(STAmount::cMaxValue, STAmount::cMaxOffset);
     else if constexpr (std::is_same_v<XRPAmount, T>)
         return XRPAmount(static_cast<std::int64_t>(STAmount::cMaxNativeN));
+    else if constexpr (std::is_same_v<MPTAmount, T>)
+        return MPTAmount(maxMPTokenAmount);
     else if constexpr (std::is_same_v<STAmount, T>)
     {
-        if (isXRP(issue))
-            return STAmount(issue, static_cast<std::int64_t>(STAmount::cMaxNativeN));
-        return STAmount(issue, STAmount::cMaxValue, STAmount::cMaxOffset);
+        return asset.visit(
+            [](Issue const& issue) {
+                if (isXRP(issue))
+                    return STAmount(issue, static_cast<std::int64_t>(STAmount::cMaxNativeN));
+                return STAmount(issue, STAmount::cMaxValue, STAmount::cMaxOffset);
+            },
+            [](MPTIssue const& issue) { return STAmount(issue, maxMPTokenAmount); });
     }
     else
     {
@@ -145,21 +194,23 @@ toMaxAmount(Issue const& issue)
 }
 
 inline STAmount
-toSTAmount(Issue const& issue, Number const& n, Number::rounding_mode mode = Number::getround())
+toSTAmount(Asset const& asset, Number const& n, Number::rounding_mode mode = Number::getround())
 {
-    return toAmount<STAmount>(issue, n, mode);
+    return toAmount<STAmount>(asset, n, mode);
 }
 
 template <typename T>
-Issue
-getIssue(T const& amt)
+Asset
+getAsset(T const& amt)
 {
     if constexpr (std::is_same_v<IOUAmount, T>)
         return noIssue();
     else if constexpr (std::is_same_v<XRPAmount, T>)
         return xrpIssue();
+    else if constexpr (std::is_same_v<MPTAmount, T>)
+        return noMPT();
     else if constexpr (std::is_same_v<STAmount, T>)
-        return amt.issue();
+        return amt.asset();
     else
     {
         constexpr bool alwaysFalse = !std::is_same_v<T, T>;
@@ -175,6 +226,8 @@ get(STAmount const& a)
         return a.iou();
     else if constexpr (std::is_same_v<XRPAmount, T>)
         return a.xrp();
+    else if constexpr (std::is_same_v<MPTAmount, T>)
+        return a.mpt();
     else if constexpr (std::is_same_v<STAmount, T>)
         return a;
     else

include/xrpl/protocol/Asset.h

@@ -2,20 +2,37 @@
 
 #include <xrpl/basics/Number.h>
 #include <xrpl/basics/base_uint.h>
+#include <xrpl/protocol/Concepts.h>
 #include <xrpl/protocol/Issue.h>
 #include <xrpl/protocol/MPTIssue.h>
+#include <xrpl/protocol/Rules.h>
 
 namespace xrpl {
 
-class Asset;
 class STAmount;
 
-template <typename TIss>
-concept ValidIssueType = std::is_same_v<TIss, Issue> || std::is_same_v<TIss, MPTIssue>;
+template <typename T>
+    requires(
+        std::is_same_v<T, XRPAmount> || std::is_same_v<T, IOUAmount> ||
+        std::is_same_v<T, MPTAmount>)
+struct AmountType
+{
+    using amount_type = T;
+};
 
-template <typename A>
-concept AssetType = std::is_convertible_v<A, Asset> || std::is_convertible_v<A, Issue> ||
-    std::is_convertible_v<A, MPTIssue> || std::is_convertible_v<A, MPTID>;
+/* Used to check for an asset with either badCurrency()
+ * or MPT with 0 account.
+ */
+struct BadAsset
+{
+};
+
+inline BadAsset const&
+badAsset()
+{
+    static BadAsset const a;
+    return a;
+}
 
 /* Asset is an abstraction of three different issue types: XRP, IOU, MPT.
  * For historical reasons, two issue types XRP and IOU are wrapped in Issue
@@ -26,6 +43,9 @@ class Asset
 {
 public:
     using value_type = std::variant<Issue, MPTIssue>;
+    using token_type = std::variant<Currency, MPTID>;
+    using AmtType =
+        std::variant<AmountType<XRPAmount>, AmountType<IOUAmount>, AmountType<MPTAmount>>;
 
 private:
     value_type issue_;
@@ -69,36 +89,42 @@ public:
     constexpr value_type const&
     value() const;
 
+    constexpr token_type
+    token() const;
+
     void
     setJson(Json::Value& jv) const;
 
     STAmount
     operator()(Number const&) const;
 
-    bool
+    constexpr AmtType
+    getAmountType() const;
+
+    // Custom, generic visit implementation
+    template <typename... Visitors>
+    constexpr auto
+    visit(Visitors&&... visitors) const -> decltype(auto)
+    {
+        // Simple delegation to the reusable utility, passing the internal
+        // variant data.
+        return detail::visit(issue_, std::forward<Visitors>(visitors)...);
+    }
+
+    constexpr bool
     native() const
     {
-        return std::visit(
-            [&]<ValidIssueType TIss>(TIss const& issue) {
-                if constexpr (std::is_same_v<TIss, Issue>)
-                    return issue.native();
-                if constexpr (std::is_same_v<TIss, MPTIssue>)
-                    return false;
-            },
-            issue_);
+        return visit(
+            [&](Issue const& issue) { return issue.native(); },
+            [&](MPTIssue const&) { return false; });
     }
 
     bool
     integral() const
     {
-        return std::visit(
-            [&]<ValidIssueType TIss>(TIss const& issue) {
-                if constexpr (std::is_same_v<TIss, Issue>)
-                    return issue.native();
-                if constexpr (std::is_same_v<TIss, MPTIssue>)
-                    return true;
-            },
-            issue_);
+        return visit(
+            [&](Issue const& issue) { return issue.native(); },
+            [&](MPTIssue const&) { return true; });
     }
 
     friend constexpr bool
@@ -110,6 +136,10 @@ public:
     friend constexpr bool
     operator==(Currency const& lhs, Asset const& rhs);
 
+    // rhs is either badCurrency() or MPT issuer is 0
+    friend constexpr bool
+    operator==(BadAsset const& lhs, Asset const& rhs);
+
     /** Return true if both assets refer to the same currency (regardless of
      * issuer) or MPT issuance. Otherwise return false.
      */
@@ -117,6 +147,12 @@ public:
     equalTokens(Asset const& lhs, Asset const& rhs);
 };
 
+template <ValidIssueType TIss>
+constexpr bool is_issue_v = std::is_same_v<TIss, Issue>;
+
+template <ValidIssueType TIss>
+constexpr bool is_mptissue_v = std::is_same_v<TIss, MPTIssue>;
+
 inline Json::Value
 to_json(Asset const& asset)
 {
@@ -156,6 +192,29 @@ Asset::value() const
     return issue_;
 }
 
+constexpr Asset::token_type
+Asset::token() const
+{
+    return visit(
+        [&](Issue const& issue) -> Asset::token_type { return issue.currency; },
+        [&](MPTIssue const& issue) -> Asset::token_type { return issue.getMptID(); });
+}
+
+constexpr Asset::AmtType
+Asset::getAmountType() const
+{
+    return visit(
+        [&](Issue const& issue) -> Asset::AmtType {
+            constexpr AmountType<XRPAmount> xrp;
+            constexpr AmountType<IOUAmount> iou;
+            return native() ? AmtType(xrp) : AmtType(iou);
+        },
+        [&](MPTIssue const& issue) -> Asset::AmtType {
+            constexpr AmountType<MPTAmount> mpt;
+            return AmtType(mpt);
+        });
+}
+
 constexpr bool
 operator==(Asset const& lhs, Asset const& rhs)
 {
@@ -177,7 +236,7 @@ operator<=>(Asset const& lhs, Asset const& rhs)
         []<ValidIssueType TLhs, ValidIssueType TRhs>(TLhs const& lhs_, TRhs const& rhs_) {
             if constexpr (std::is_same_v<TLhs, TRhs>)
                 return std::weak_ordering(lhs_ <=> rhs_);
-            else if constexpr (std::is_same_v<TLhs, Issue> && std::is_same_v<TRhs, MPTIssue>)
+            else if constexpr (is_issue_v<TLhs> && is_mptissue_v<TRhs>)
                 return std::weak_ordering::greater;
             else
                 return std::weak_ordering::less;
@@ -189,7 +248,17 @@ operator<=>(Asset const& lhs, Asset const& rhs)
 constexpr bool
 operator==(Currency const& lhs, Asset const& rhs)
 {
-    return rhs.holds<Issue>() && rhs.get<Issue>().currency == lhs;
+    return rhs.visit(
+        [&](Issue const& issue) { return issue.currency == lhs; },
+        [](MPTIssue const& issue) { return false; });
+}
+
+constexpr bool
+operator==(BadAsset const&, Asset const& rhs)
+{
+    return rhs.visit(
+        [](Issue const& issue) -> bool { return badCurrency() == issue.currency; },
+        [](MPTIssue const& issue) -> bool { return issue.getIssuer() == xrpAccount(); });
 }
 
 constexpr bool
@@ -223,4 +292,36 @@ validJSONAsset(Json::Value const& jv);
 Asset
 assetFromJson(Json::Value const& jv);
 
+Json::Value
+to_json(Asset const& asset);
+
+inline bool
+isConsistent(Asset const& asset)
+{
+    return asset.visit(
+        [](Issue const& issue) { return isConsistent(issue); },
+        [](MPTIssue const&) { return true; });
+}
+
+inline bool
+validAsset(Asset const& asset)
+{
+    return asset.visit(
+        [](Issue const& issue) { return isConsistent(issue) && issue.currency != badCurrency(); },
+        [](MPTIssue const& issue) { return issue.getIssuer() != xrpAccount(); });
+}
+
+template <class Hasher>
+void
+hash_append(Hasher& h, Asset const& r)
+{
+    using beast::hash_append;
+    r.visit(
+        [&](Issue const& issue) { hash_append(h, issue); },
+        [&](MPTIssue const& issue) { hash_append(h, issue); });
+}
+
+std::ostream&
+operator<<(std::ostream& os, Asset const& x);
+
 }  // namespace xrpl

include/xrpl/protocol/Book.h

@@ -2,7 +2,7 @@
 
 #include <xrpl/basics/CountedObject.h>
 #include <xrpl/basics/base_uint.h>
-#include <xrpl/protocol/Issue.h>
+#include <xrpl/protocol/Asset.h>
 
 #include <boost/utility/base_from_member.hpp>
 
@@ -15,15 +15,15 @@ namespace xrpl {
 class Book final : public CountedObject<Book>
 {
 public:
-    Issue in;
-    Issue out;
+    Asset in;
+    Asset out;
     std::optional<uint256> domain;
 
     Book()
     {
     }
 
-    Book(Issue const& in_, Issue const& out_, std::optional<uint256> const& domain_)
+    Book(Asset const& in_, Asset const& out_, std::optional<uint256> const& domain_)
         : in(in_), out(out_), domain(domain_)
     {
     }
@@ -112,16 +112,67 @@ public:
     }
 };
 
+template <>
+struct hash<xrpl::MPTIssue> : private boost::base_from_member<std::hash<xrpl::MPTID>, 0>
+{
+private:
+    using id_hash_type = boost::base_from_member<std::hash<xrpl::MPTID>, 0>;
+
+public:
+    explicit hash() = default;
+
+    using value_type = std::size_t;
+    using argument_type = xrpl::MPTIssue;
+
+    value_type
+    operator()(argument_type const& value) const
+    {
+        value_type const result(id_hash_type::member(value.getMptID()));
+        return result;
+    }
+};
+
+template <>
+struct hash<xrpl::Asset>
+{
+private:
+    using value_type = std::size_t;
+    using argument_type = xrpl::Asset;
+
+    using issue_hasher = std::hash<xrpl::Issue>;
+    using mptissue_hasher = std::hash<xrpl::MPTIssue>;
+
+    issue_hasher m_issue_hasher;
+    mptissue_hasher m_mptissue_hasher;
+
+public:
+    explicit hash() = default;
+
+    value_type
+    operator()(argument_type const& asset) const
+    {
+        return asset.visit(
+            [&](xrpl::Issue const& issue) {
+                value_type const result(m_issue_hasher(issue));
+                return result;
+            },
+            [&](xrpl::MPTIssue const& issue) {
+                value_type const result(m_mptissue_hasher(issue));
+                return result;
+            });
+    }
+};
+
 //------------------------------------------------------------------------------
 
 template <>
 struct hash<xrpl::Book>
 {
 private:
-    using issue_hasher = std::hash<xrpl::Issue>;
+    using asset_hasher = std::hash<xrpl::Asset>;
     using uint256_hasher = xrpl::uint256::hasher;
 
-    issue_hasher m_issue_hasher;
+    asset_hasher m_asset_hasher;
     uint256_hasher m_uint256_hasher;
 
 public:
@@ -133,8 +184,8 @@ public:
     value_type
     operator()(argument_type const& value) const
     {
-        value_type result(m_issue_hasher(value.in));
-        boost::hash_combine(result, m_issue_hasher(value.out));
+        value_type result(m_asset_hasher(value.in));
+        boost::hash_combine(result, m_asset_hasher(value.out));
 
         if (value.domain)
             boost::hash_combine(result, m_uint256_hasher(*value.domain));
@@ -159,6 +210,22 @@ struct hash<xrpl::Issue> : std::hash<xrpl::Issue>
     // using Base::Base; // inherit ctors
 };
 
+template <>
+struct hash<xrpl::MPTIssue> : std::hash<xrpl::MPTIssue>
+{
+    explicit hash() = default;
+
+    using Base = std::hash<xrpl::MPTIssue>;
+};
+
+template <>
+struct hash<xrpl::Asset> : std::hash<xrpl::Asset>
+{
+    explicit hash() = default;
+
+    using Base = std::hash<xrpl::Asset>;
+};
+
 template <>
 struct hash<xrpl::Book> : std::hash<xrpl::Book>
 {

include/xrpl/protocol/BuildInfo.h

@@ -33,7 +33,7 @@ getFullVersionString();
     X: 16 bits identifying the particular implementation
     Y: 48 bits of data specific to the implementation
 
-    The rippled-specific format (implementation ID is: 0x18 0x3B) is:
+    The xrpld-specific format (implementation ID is: 0x18 0x3B) is:
 
     00011000-00111011-MMMMMMMM-mmmmmmmm-pppppppp-TTNNNNNN-00000000-00000000
 
@@ -55,23 +55,23 @@ encodeSoftwareVersion(std::string_view versionStr);
 std::uint64_t
 getEncodedVersion();
 
-/** Check if the encoded software version is a rippled software version.
+/** Check if the encoded software version is an xrpld software version.
 
     @param version another node's encoded software version
-    @return true if the version is a rippled software version, false otherwise
+    @return true if the version is an xrpld software version, false otherwise
 */
 bool
-isRippledVersion(std::uint64_t version);
+isXrpldVersion(std::uint64_t version);
 
-/** Check if the version is newer than the local node's rippled software
+/** Check if the version is newer than the local node's xrpld software
     version.
 
     @param version another node's encoded software version
-    @return true if the version is newer than the local node's rippled software
+    @return true if the version is newer than the local node's xrpld software
         version, false otherwise.
 
     @note This function only understands version numbers that are generated by
-        rippled. Please see the encodeSoftwareVersion() function for detail.
+        xrpld. Please see the encodeSoftwareVersion() function for detail.
 */
 bool
 isNewerVersion(std::uint64_t version);

include/xrpl/protocol/Concepts.h

@@ -0,0 +1,86 @@
+#pragma once
+
+#include <xrpl/protocol/UintTypes.h>
+
+#include <type_traits>
+
+namespace xrpl {
+
+class STAmount;
+class Asset;
+class Issue;
+class MPTIssue;
+class IOUAmount;
+class XRPAmount;
+class MPTAmount;
+
+template <typename A>
+concept StepAmount =
+    std::is_same_v<A, XRPAmount> || std::is_same_v<A, IOUAmount> || std::is_same_v<A, MPTAmount>;
+
+template <typename TIss>
+concept ValidIssueType = std::is_same_v<TIss, Issue> || std::is_same_v<TIss, MPTIssue>;
+
+template <typename A>
+concept AssetType = std::is_convertible_v<A, Asset> || std::is_convertible_v<A, Issue> ||
+    std::is_convertible_v<A, MPTIssue> || std::is_convertible_v<A, MPTID>;
+
+template <typename T>
+concept ValidPathAsset = (std::is_same_v<T, Currency> || std::is_same_v<T, MPTID>);
+
+template <class TTakerPays, class TTakerGets>
+concept ValidTaker =
+    ((std::is_same_v<TTakerPays, IOUAmount> || std::is_same_v<TTakerPays, XRPAmount> ||
+      std::is_same_v<TTakerPays, MPTAmount>) &&
+     (std::is_same_v<TTakerGets, IOUAmount> || std::is_same_v<TTakerGets, XRPAmount> ||
+      std::is_same_v<TTakerGets, MPTAmount>) &&
+     (!std::is_same_v<TTakerPays, XRPAmount> || !std::is_same_v<TTakerGets, XRPAmount>));
+
+namespace detail {
+
+// This template combines multiple callable objects (lambdas) into a single
+// object that std::visit can use for overload resolution.
+template <typename... Ts>
+struct CombineVisitors : Ts...
+{
+    // Bring all operator() overloads from base classes into this scope.
+    // It's the mechanism that makes the CombineVisitors struct function
+    // as a single callable object with multiple overloads.
+    using Ts::operator()...;
+
+    // Perfect forwarding constructor to correctly initialize the base class
+    // lambdas
+    constexpr CombineVisitors(Ts&&... ts) : Ts(std::forward<Ts>(ts))...
+    {
+    }
+};
+
+// This function forces function template argument deduction, which is more
+// robust than class template argument deduction (CTAD) via the deduction guide.
+template <typename... Ts>
+constexpr CombineVisitors<std::decay_t<Ts>...>
+make_combine_visitors(Ts&&... ts)
+{
+    // std::decay_t<Ts> is used to remove references/constness from the lambda
+    // types before they are passed as template arguments to the CombineVisitors
+    // struct.
+    return CombineVisitors<std::decay_t<Ts>...>{std::forward<Ts>(ts)...};
+}
+
+// This function takes ANY variant and ANY number of visitors, and performs the
+// visit. It is the reusable core logic.
+template <typename Variant, typename... Visitors>
+constexpr auto
+visit(Variant&& v, Visitors&&... visitors) -> decltype(auto)
+{
+    // Use the function template helper instead of raw CTAD.
+    auto visitor_set = make_combine_visitors(std::forward<Visitors>(visitors)...);
+
+    // Delegate to std::visit, perfectly forwarding the variant and the visitor
+    // set.
+    return std::visit(visitor_set, std::forward<Variant>(v));
+}
+
+}  // namespace detail
+
+}  // namespace xrpl

include/xrpl/protocol/ErrorCodes.h

@@ -153,7 +153,7 @@ enum warning_code_i {
     warnRPC_AMENDMENT_BLOCKED = 1002,
     warnRPC_EXPIRED_VALIDATOR_LIST = 1003,
     // unused = 1004
-    warnRPC_FIELDS_DEPRECATED = 2004,  // rippled needs to maintain
+    warnRPC_FIELDS_DEPRECATED = 2004,  // xrpld needs to maintain
                                        // compatibility with Clio on this code.
 };
 

include/xrpl/protocol/Feature.h

@@ -37,10 +37,10 @@
  * 5) If a supported feature (`Supported::yes`) was _ever_ in a released
  *     version, it can never be changed back to `Supported::no`, because
  *     it _may_ still become enabled at any time. This would cause newer
- *     versions of `rippled` to become amendment blocked.
+ *     versions of `xrpld` to become amendment blocked.
  *     Instead, to prevent newer versions from voting on the feature, use
  *     `VoteBehavior::Obsolete`. Obsolete features can not be voted for
- *     by any versions of `rippled` built with that setting, but will still
+ *     by any versions of `xrpld` built with that setting, but will still
  *     work correctly if they get enabled. If a feature remains obsolete
  *     for long enough that _all_ clients that could vote for it are
  *     amendment blocked, the feature can be removed from the code

include/xrpl/protocol/LedgerFormats.h

@@ -187,7 +187,8 @@ enum LedgerEntryType : std::uint16_t {
                                                                                                                                    \
     LEDGER_OBJECT(MPToken,                                                                                                         \
         LSF_FLAG2(lsfMPTLocked, 0x00000001)                                                                                        \
-        LSF_FLAG(lsfMPTAuthorized, 0x00000002))                                                                                    \
+        LSF_FLAG(lsfMPTAuthorized, 0x00000002)                                                                                     \
+        LSF_FLAG(lsfMPTAMM, 0x00000004))                                                                                           \
                                                                                                                                    \
     LEDGER_OBJECT(Credential,                                                                                                      \
         LSF_FLAG(lsfAccepted, 0x00010000))                                                                                         \

include/xrpl/protocol/MPTAmount.h

@@ -22,11 +22,12 @@ public:
     using value_type = std::int64_t;
 
 protected:
-    value_type value_;
+    value_type value_{};
 
 public:
     MPTAmount() = default;
     constexpr MPTAmount(MPTAmount const& other) = default;
+    constexpr MPTAmount(beast::Zero);
     constexpr MPTAmount&
     operator=(MPTAmount const& other) = default;
 
@@ -85,6 +86,11 @@ constexpr MPTAmount::MPTAmount(value_type value) : value_(value)
 {
 }
 
+constexpr MPTAmount::MPTAmount(beast::Zero)
+{
+    *this = beast::zero;
+}
+
 constexpr MPTAmount&
 MPTAmount::operator=(beast::Zero)
 {
@@ -116,6 +122,14 @@ MPTAmount::value() const
     return value_;
 }
 
+// Output MPTAmount as just the value.
+template <class Char, class Traits>
+std::basic_ostream<Char, Traits>&
+operator<<(std::basic_ostream<Char, Traits>& os, MPTAmount const& q)
+{
+    return os << q.value();
+}
+
 inline std::string
 to_string(MPTAmount const& amount)
 {

include/xrpl/protocol/MPTIssue.h

@@ -17,7 +17,14 @@ private:
 public:
     MPTIssue() = default;
 
-    explicit MPTIssue(MPTID const& issuanceID);
+    MPTIssue(MPTID const& issuanceID);
+
+    MPTIssue(std::uint32_t sequence, AccountID const& account);
+
+    operator MPTID const&() const
+    {
+        return mptID_;
+    }
 
     AccountID const&
     getIssuer() const;
@@ -73,6 +80,47 @@ isXRP(MPTID const&)
     return false;
 }
 
+inline AccountID
+getMPTIssuer(MPTID const& mptid)
+{
+    static_assert(sizeof(MPTID) == (sizeof(std::uint32_t) + sizeof(AccountID)));
+    // Extract the 20 bytes for the AccountID
+    std::array<std::uint8_t, sizeof(AccountID)> bytes{};
+    std::copy_n(mptid.data() + sizeof(std::uint32_t), sizeof(AccountID), bytes.begin());
+
+    // bit_cast is a "magic" compiler intrinsic that is
+    // usually optimized away to nothing in the final assembly.
+    return std::bit_cast<AccountID>(bytes);
+}
+
+// Disallow temporary
+inline AccountID const&
+getMPTIssuer(MPTID const&&) = delete;
+inline AccountID const&
+getMPTIssuer(MPTID&&) = delete;
+
+inline MPTID
+noMPT()
+{
+    static MPTIssue const mpt{0, noAccount()};
+    return mpt.getMptID();
+}
+
+inline MPTID
+badMPT()
+{
+    static MPTIssue const mpt{0, xrpAccount()};
+    return mpt.getMptID();
+}
+
+template <class Hasher>
+void
+hash_append(Hasher& h, MPTIssue const& r)
+{
+    using beast::hash_append;
+    hash_append(h, r.getMptID());
+}
+
 Json::Value
 to_json(MPTIssue const& mptIssue);
 
@@ -82,4 +130,17 @@ to_string(MPTIssue const& mptIssue);
 MPTIssue
 mptIssueFromJson(Json::Value const& jv);
 
+std::ostream&
+operator<<(std::ostream& os, MPTIssue const& x);
+
 }  // namespace xrpl
+
+namespace std {
+
+template <>
+struct hash<xrpl::MPTID> : xrpl::MPTID::hasher
+{
+    explicit hash() = default;
+};
+
+}  // namespace std

include/xrpl/protocol/PathAsset.h

@@ -0,0 +1,130 @@
+#pragma once
+
+#include <xrpl/protocol/Asset.h>
+#include <xrpl/protocol/Concepts.h>
+
+namespace xrpl {
+
+/* Represent STPathElement's asset, which can be Currency or MPTID.
+ */
+class PathAsset
+{
+private:
+    std::variant<Currency, MPTID> easset_;
+
+public:
+    PathAsset() = default;
+    // Enables comparing Asset and PathAsset
+    PathAsset(Asset const& asset);
+    PathAsset(Currency const& currency) : easset_(currency)
+    {
+    }
+    PathAsset(MPTID const& mpt) : easset_(mpt)
+    {
+    }
+
+    template <ValidPathAsset T>
+    constexpr bool
+    holds() const;
+
+    constexpr bool
+    isXRP() const;
+
+    template <ValidPathAsset T>
+    T const&
+    get() const;
+
+    constexpr std::variant<Currency, MPTID> const&
+    value() const;
+
+    // Custom, generic visit implementation
+    template <typename... Visitors>
+    constexpr auto
+    visit(Visitors&&... visitors) const -> decltype(auto)
+    {
+        // Simple delegation to the reusable utility, passing the internal
+        // variant data.
+        return detail::visit(easset_, std::forward<Visitors>(visitors)...);
+    }
+
+    friend constexpr bool
+    operator==(PathAsset const& lhs, PathAsset const& rhs);
+};
+
+template <ValidPathAsset PA>
+constexpr bool is_currency_v = std::is_same_v<PA, Currency>;
+
+template <ValidPathAsset PA>
+constexpr bool is_mptid_v = std::is_same_v<PA, MPTID>;
+
+inline PathAsset::PathAsset(Asset const& asset)
+{
+    asset.visit(
+        [&](Issue const& issue) { easset_ = issue.currency; },
+        [&](MPTIssue const& issue) { easset_ = issue.getMptID(); });
+}
+
+template <ValidPathAsset T>
+constexpr bool
+PathAsset::holds() const
+{
+    return std::holds_alternative<T>(easset_);
+}
+
+template <ValidPathAsset T>
+T const&
+PathAsset::get() const
+{
+    if (!holds<T>())
+        Throw<std::runtime_error>("PathAsset doesn't hold requested asset.");
+    return std::get<T>(easset_);
+}
+
+constexpr std::variant<Currency, MPTID> const&
+PathAsset::value() const
+{
+    return easset_;
+}
+
+constexpr bool
+PathAsset::isXRP() const
+{
+    return visit(
+        [&](Currency const& currency) { return xrpl::isXRP(currency); },
+        [](MPTID const&) { return false; });
+}
+
+constexpr bool
+operator==(PathAsset const& lhs, PathAsset const& rhs)
+{
+    return std::visit(
+        []<ValidPathAsset TLhs, ValidPathAsset TRhs>(TLhs const& lhs_, TRhs const& rhs_) {
+            if constexpr (std::is_same_v<TLhs, TRhs>)
+                return lhs_ == rhs_;
+            else
+                return false;
+        },
+        lhs.value(),
+        rhs.value());
+}
+
+template <typename Hasher>
+void
+hash_append(Hasher& h, PathAsset const& pathAsset)
+{
+    std::visit([&]<ValidPathAsset T>(T const& e) { hash_append(h, e); }, pathAsset.value());
+}
+
+inline bool
+isXRP(PathAsset const& asset)
+{
+    return asset.isXRP();
+}
+
+std::string
+to_string(PathAsset const& asset);
+
+std::ostream&
+operator<<(std::ostream& os, PathAsset const& x);
+
+}  // namespace xrpl

include/xrpl/protocol/PublicKey.h

@@ -21,7 +21,7 @@ namespace xrpl {
     Public keys are used in the public-key cryptography
     system used to verify signatures attached to messages.
 
-    The format of the public key is Ripple specific,
+    The format of the public key is XRPL specific,
     information needed to determine the cryptosystem
     parameters used is stored inside the key.
 

include/xrpl/protocol/Quality.h

@@ -78,7 +78,7 @@ operator!=(TAmounts<In, Out> const& lhs, TAmounts<In, Out> const& rhs) noexcept
 
 //------------------------------------------------------------------------------
 
-// Ripple specific constant used for parsing qualities and other things
+// XRPL specific constant used for parsing qualities and other things
 #define QUALITY_ONE 1'000'000'000
 
 /** Represents the logical ratio of output currency to input currency.

include/xrpl/protocol/README.md

@@ -22,7 +22,7 @@ optional fields easier to read:
 - The operation `x[~sfFoo]` means "return the value of 'Foo'
   if it exists, or nothing if it doesn't." This usage of the
   tilde/bitwise NOT operator is not standard outside of the
-  `rippled` codebase.
+  `xrpld` codebase.
   - As a consequence of this, `x[~sfFoo] = y[~sfFoo]`
     assigns the value of Foo from y to x, including omitting
     Foo from x if it doesn't exist in y.
@@ -33,7 +33,7 @@ or may not hold a value. For things not guaranteed to exist,
 you use `x[~sfFoo]` because you want such a container. It
 avoids having to look something up twice, once just to see if
 it exists and a second time to get/set its value.
-([Real example](https://github.com/ripple/rippled/blob/35f4698aed5dce02f771b34cfbb690495cb5efcc/src/ripple/app/tx/impl/PayChan.cpp#L229-L236))
+([Real example](https://github.com/XRPLF/rippled/blob/35f4698aed5dce02f771b34cfbb690495cb5efcc/src/ripple/app/tx/impl/PayChan.cpp#L229-L236))
 
 The source of this "type magic" is in
 [SField.h](./SField.h#L296-L302).

include/xrpl/protocol/STAccount.h

@@ -13,7 +13,7 @@ class STAccount final : public STBase, public CountedObject<STAccount>
 private:
     // The original implementation of STAccount kept the value in an STBlob.
     // But an STAccount is always 160 bits, so we can store it with less
-    // overhead in a xrpl::uint160.  However, so the serialized format of the
+    // overhead in an xrpl::uint160.  However, so the serialized format of the
     // STAccount stays unchanged, we serialize and deserialize like an STBlob.
     AccountID value_;
     bool default_;

include/xrpl/protocol/STAmount.h

@@ -164,12 +164,9 @@ public:
     constexpr TIss const&
     get() const;
 
-    Issue const&
-    issue() const;
-
-    // These three are deprecated
-    Currency const&
-    getCurrency() const;
+    template <ValidIssueType TIss>
+    TIss&
+    get();
 
     AccountID const&
     getIssuer() const;
@@ -225,9 +222,6 @@ public:
     void
     clear(Asset const& asset);
 
-    void
-    setIssuer(AccountID const& uIssuer);
-
     /** Set the Issue for this amount. */
     void
     setIssue(Asset const& asset);
@@ -466,16 +460,11 @@ STAmount::get() const
     return mAsset.get<TIss>();
 }
 
-inline Issue const&
-STAmount::issue() const
+template <ValidIssueType TIss>
+TIss&
+STAmount::get()
 {
-    return get<Issue>();
-}
-
-inline Currency const&
-STAmount::getCurrency() const
-{
-    return mAsset.get<Issue>().currency;
+    return mAsset.get<TIss>();
 }
 
 inline AccountID const&
@@ -505,11 +494,13 @@ operator bool() const noexcept
 inline STAmount::
 operator Number() const
 {
-    if (native())
-        return xrp();
-    if (mAsset.holds<MPTIssue>())
-        return mpt();
-    return iou();
+    return asset().visit(
+        [&](Issue const& issue) -> Number {
+            if (issue.native())
+                return xrp();
+            return iou();
+        },
+        [&](MPTIssue const&) -> Number { return mpt(); });
 }
 
 inline STAmount&
@@ -568,12 +559,6 @@ STAmount::clear(Asset const& asset)
     clear();
 }
 
-inline void
-STAmount::setIssuer(AccountID const& uIssuer)
-{
-    mAsset.get<Issue>().account = uIssuer;
-}
-
 inline STAmount const&
 STAmount::value() const noexcept
 {

include/xrpl/protocol/STObject.h

@@ -349,6 +349,8 @@ public:
     void
     setFieldH128(SField const& field, uint128 const&);
     void
+    setFieldH192(SField const& field, uint192 const&);
+    void
     setFieldH256(SField const& field, uint256 const&);
     void
     setFieldI32(SField const& field, std::int32_t);

include/xrpl/protocol/STPathSet.h

@@ -3,6 +3,8 @@
 #include <xrpl/basics/CountedObject.h>
 #include <xrpl/beast/utility/instrumentation.h>
 #include <xrpl/json/json_value.h>
+#include <xrpl/protocol/Asset.h>
+#include <xrpl/protocol/PathAsset.h>
 #include <xrpl/protocol/SField.h>
 #include <xrpl/protocol/STBase.h>
 #include <xrpl/protocol/UintTypes.h>
@@ -16,7 +18,7 @@ class STPathElement final : public CountedObject<STPathElement>
 {
     unsigned int mType;
     AccountID mAccountID;
-    Currency mCurrencyID;
+    PathAsset mAssetID;
     AccountID mIssuerID;
 
     bool is_offer_;
@@ -28,8 +30,10 @@ public:
         typeAccount = 0x01,   // Rippling through an account (vs taking an offer).
         typeCurrency = 0x10,  // Currency follows.
         typeIssuer = 0x20,    // Issuer follows.
+        typeMPT = 0x40,       // MPT follows.
         typeBoundary = 0xFF,  // Boundary between alternate paths.
-        typeAll = typeAccount | typeCurrency | typeIssuer,
+        typeAsset = typeCurrency | typeMPT,
+        typeAll = typeAccount | typeCurrency | typeIssuer | typeMPT,
         // Combination of all types.
     };
 
@@ -40,19 +44,19 @@ public:
 
     STPathElement(
         std::optional<AccountID> const& account,
-        std::optional<Currency> const& currency,
+        std::optional<PathAsset> const& asset,
         std::optional<AccountID> const& issuer);
 
     STPathElement(
         AccountID const& account,
-        Currency const& currency,
+        PathAsset const& asset,
         AccountID const& issuer,
-        bool forceCurrency = false);
+        bool forceAsset = false);
 
     STPathElement(
         unsigned int uType,
         AccountID const& account,
-        Currency const& currency,
+        PathAsset const& asset,
         AccountID const& issuer);
 
     auto
@@ -70,6 +74,12 @@ public:
     bool
     hasCurrency() const;
 
+    bool
+    hasMPT() const;
+
+    bool
+    hasAsset() const;
+
     bool
     isNone() const;
 
@@ -78,12 +88,21 @@ public:
     AccountID const&
     getAccountID() const;
 
+    PathAsset const&
+    getPathAsset() const;
+
     Currency const&
     getCurrency() const;
 
+    MPTID const&
+    getMPTID() const;
+
     AccountID const&
     getIssuerID() const;
 
+    bool
+    isType(Type const& pe) const;
+
     bool
     operator==(STPathElement const& t) const;
 
@@ -118,7 +137,7 @@ public:
     emplace_back(Args&&... args);
 
     bool
-    hasSeen(AccountID const& account, Currency const& currency, AccountID const& issuer) const;
+    hasSeen(AccountID const& account, PathAsset const& asset, AccountID const& issuer) const;
 
     Json::Value getJson(JsonOptions) const;
 
@@ -221,7 +240,7 @@ inline STPathElement::STPathElement() : mType(typeNone), is_offer_(true)
 
 inline STPathElement::STPathElement(
     std::optional<AccountID> const& account,
-    std::optional<Currency> const& currency,
+    std::optional<PathAsset> const& asset,
     std::optional<AccountID> const& issuer)
     : mType(typeNone)
 {
@@ -238,10 +257,10 @@ inline STPathElement::STPathElement(
             mAccountID != noAccount(), "xrpl::STPathElement::STPathElement : account is set");
     }
 
-    if (currency)
+    if (asset)
     {
-        mCurrencyID = *currency;
-        mType |= typeCurrency;
+        mAssetID = *asset;
+        mType |= mAssetID.holds<Currency>() ? typeCurrency : typeMPT;
     }
 
     if (issuer)
@@ -256,20 +275,20 @@ inline STPathElement::STPathElement(
 
 inline STPathElement::STPathElement(
     AccountID const& account,
-    Currency const& currency,
+    PathAsset const& asset,
     AccountID const& issuer,
-    bool forceCurrency)
+    bool forceAsset)
     : mType(typeNone)
     , mAccountID(account)
-    , mCurrencyID(currency)
+    , mAssetID(asset)
     , mIssuerID(issuer)
     , is_offer_(isXRP(mAccountID))
 {
     if (!is_offer_)
         mType |= typeAccount;
 
-    if (forceCurrency || !isXRP(currency))
-        mType |= typeCurrency;
+    if (forceAsset || !isXRP(mAssetID))
+        mType |= asset.holds<Currency>() ? typeCurrency : typeMPT;
 
     if (!isXRP(issuer))
         mType |= typeIssuer;
@@ -280,14 +299,19 @@ inline STPathElement::STPathElement(
 inline STPathElement::STPathElement(
     unsigned int uType,
     AccountID const& account,
-    Currency const& currency,
+    PathAsset const& asset,
     AccountID const& issuer)
     : mType(uType)
     , mAccountID(account)
-    , mCurrencyID(currency)
+    , mAssetID(asset)
     , mIssuerID(issuer)
     , is_offer_(isXRP(mAccountID))
 {
+    // uType could be assetType; i.e. either Currency or MPTID.
+    // Get the actual type.
+    mAssetID.visit(
+        [&](Currency const&) { mType = mType & (~Type::typeMPT); },
+        [&](MPTID const&) { mType = mType & (~Type::typeCurrency); });
     hash_value_ = get_hash(*this);
 }
 
@@ -309,16 +333,34 @@ STPathElement::isAccount() const
     return !isOffer();
 }
 
+inline bool
+STPathElement::isType(Type const& pe) const
+{
+    return (mType & pe) != 0u;
+}
+
 inline bool
 STPathElement::hasIssuer() const
 {
-    return getNodeType() & STPathElement::typeIssuer;
+    return isType(STPathElement::typeIssuer);
 }
 
 inline bool
 STPathElement::hasCurrency() const
 {
-    return getNodeType() & STPathElement::typeCurrency;
+    return isType(STPathElement::typeCurrency);
+}
+
+inline bool
+STPathElement::hasMPT() const
+{
+    return isType(STPathElement::typeMPT);
+}
+
+inline bool
+STPathElement::hasAsset() const
+{
+    return isType(STPathElement::typeAsset);
 }
 
 inline bool
@@ -335,10 +377,22 @@ STPathElement::getAccountID() const
     return mAccountID;
 }
 
+inline PathAsset const&
+STPathElement::getPathAsset() const
+{
+    return mAssetID;
+}
+
 inline Currency const&
 STPathElement::getCurrency() const
 {
-    return mCurrencyID;
+    return mAssetID.get<Currency>();
+}
+
+inline MPTID const&
+STPathElement::getMPTID() const
+{
+    return mAssetID.get<MPTID>();
 }
 
 inline AccountID const&
@@ -351,7 +405,7 @@ inline bool
 STPathElement::operator==(STPathElement const& t) const
 {
     return (mType & typeAccount) == (t.mType & typeAccount) && hash_value_ == t.hash_value_ &&
-        mAccountID == t.mAccountID && mCurrencyID == t.mCurrencyID && mIssuerID == t.mIssuerID;
+        mAccountID == t.mAccountID && mAssetID == t.mAssetID && mIssuerID == t.mIssuerID;
 }
 
 inline bool

include/xrpl/protocol/SecretKey.h

@@ -118,7 +118,7 @@ derivePublicKey(KeyType type, SecretKey const& sk);
 
 /** Generate a key pair deterministically.
 
-    This algorithm is specific to Ripple:
+    This algorithm is specific to the XRPL:
 
     For secp256k1 key pairs, the seed is converted
     to a Generator and used to compute the key pair

include/xrpl/protocol/Seed.h

@@ -80,7 +80,7 @@ randomSeed();
 
 /** Generate a seed deterministically.
 
-    The algorithm is specific to Ripple:
+    The algorithm is specific to the XRPL:
 
         The seed is calculated as the first 128 bits
         of the SHA512-Half of the string text excluding

include/xrpl/protocol/TER.h

@@ -121,6 +121,7 @@ enum TEMcodes : TERUnderlyingType {
     temARRAY_TOO_LARGE,
     temBAD_TRANSFER_FEE,
     temINVALID_INNER_BATCH,
+    temBAD_MPT,
 };
 
 //------------------------------------------------------------------------------
@@ -208,6 +209,7 @@ enum TERcodes : TERUnderlyingType {
     terADDRESS_COLLISION,       // Failed to allocate AccountID when trying to
                                 // create a pseudo-account
     terNO_DELEGATE_PERMISSION,  // Delegate does not have permission
+    terLOCKED,                  // MPT is locked
 };
 
 //------------------------------------------------------------------------------

include/xrpl/protocol/Units.h

@@ -21,7 +21,7 @@ namespace unit {
 struct dropTag;
 /** "fee levels" are used by the transaction queue to compare the relative
     cost of transactions that require different levels of effort to process.
-    See also: src/ripple/app/misc/FeeEscalation.md#fee-level */
+    See also: src/xrpld/app/misc/FeeEscalation.md#fee-level */
 struct feelevelTag;
 /** unitless values are plain scalars wrapped in a ValueUnit. They are
     used for calculations in this header. */

include/xrpl/protocol/detail/features.macro

@@ -15,6 +15,7 @@
 // Add new amendments to the top of this list.
 // Keep it sorted in reverse chronological order.
 
+XRPL_FEATURE(MPTokensV2,                  Supported::no, VoteBehavior::DefaultNo)
 XRPL_FIX    (Security3_1_3,               Supported::no, VoteBehavior::DefaultNo)
 XRPL_FIX    (PermissionedDomainInvariant, Supported::yes, VoteBehavior::DefaultNo)
 XRPL_FIX    (ExpiredNFTokenOfferRemoval,  Supported::yes, VoteBehavior::DefaultNo)

include/xrpl/protocol/detail/ledger_entries.macro

@@ -161,8 +161,10 @@ LEDGER_ENTRY(ltDIR_NODE, 0x0064, DirectoryNode, directory, ({
     {sfOwner,                soeOPTIONAL},  // for owner directories
     {sfTakerPaysCurrency,    soeOPTIONAL},  // order book directories
     {sfTakerPaysIssuer,      soeOPTIONAL},  // order book directories
+    {sfTakerPaysMPT,         soeOPTIONAL},  // order book directories
     {sfTakerGetsCurrency,    soeOPTIONAL},  // order book directories
     {sfTakerGetsIssuer,      soeOPTIONAL},  // order book directories
+    {sfTakerGetsMPT,         soeOPTIONAL},  // order book directories
     {sfExchangeRate,         soeOPTIONAL},  // order book directories
     {sfIndexes,              soeREQUIRED},
     {sfRootIndex,            soeREQUIRED},
@@ -578,7 +580,7 @@ LEDGER_ENTRY(ltLOAN, 0x0089, Loan, loan, ({
     //   The unrounded true total value of the loan.
     //
     // - TrueTotalPrincipalOutstanding can be computed using the algorithm
-    //   in the ripple::detail::loanPrincipalFromPeriodicPayment function.
+    //   in the xrpl::detail::loanPrincipalFromPeriodicPayment function.
     //
     // - TrueTotalInterestOutstanding = TrueTotalLoanValue -
     //      TrueTotalPrincipalOutstanding

include/xrpl/protocol/detail/sfields.macro

@@ -159,6 +159,8 @@ TYPED_SFIELD(sfTakerGetsIssuer,          UINT160,    4)
 // 192-bit (common)
 TYPED_SFIELD(sfMPTokenIssuanceID,        UINT192,    1)
 TYPED_SFIELD(sfShareMPTID,               UINT192,    2)
+TYPED_SFIELD(sfTakerPaysMPT,             UINT192,    3)
+TYPED_SFIELD(sfTakerGetsMPT,             UINT192,    4)
 
 // 256-bit (common)
 TYPED_SFIELD(sfLedgerHash,               UINT256,    1)

include/xrpl/protocol/detail/transactions.macro

@@ -27,7 +27,7 @@
 TRANSACTION(ttPAYMENT, 0, Payment,
     Delegation::delegable,
     uint256{},
-    createAcct,
+    createAcct | mayCreateMPT,
     ({
     {sfDestination, soeREQUIRED},
     {sfAmount, soeREQUIRED, soeMPTSupported},
@@ -129,10 +129,10 @@ TRANSACTION(ttREGULAR_KEY_SET, 5, SetRegularKey,
 TRANSACTION(ttOFFER_CREATE, 7, OfferCreate,
     Delegation::delegable,
     uint256{},
-    noPriv,
+    mayCreateMPT,
     ({
-    {sfTakerPays, soeREQUIRED},
-    {sfTakerGets, soeREQUIRED},
+    {sfTakerPays, soeREQUIRED, soeMPTSupported},
+    {sfTakerGets, soeREQUIRED, soeMPTSupported},
     {sfExpiration, soeOPTIONAL},
     {sfOfferSequence, soeOPTIONAL},
     {sfDomainID, soeOPTIONAL},
@@ -239,7 +239,7 @@ TRANSACTION(ttCHECK_CREATE, 16, CheckCreate,
     noPriv,
     ({
     {sfDestination, soeREQUIRED},
-    {sfSendMax, soeREQUIRED},
+    {sfSendMax, soeREQUIRED, soeMPTSupported},
     {sfExpiration, soeOPTIONAL},
     {sfDestinationTag, soeOPTIONAL},
     {sfInvoiceID, soeOPTIONAL},
@@ -252,11 +252,11 @@ TRANSACTION(ttCHECK_CREATE, 16, CheckCreate,
 TRANSACTION(ttCHECK_CASH, 17, CheckCash,
     Delegation::delegable,
     uint256{},
-    noPriv,
+    mayCreateMPT,
     ({
     {sfCheckID, soeREQUIRED},
-    {sfAmount, soeOPTIONAL},
-    {sfDeliverMin, soeOPTIONAL},
+    {sfAmount, soeOPTIONAL, soeMPTSupported},
+    {sfDeliverMin, soeOPTIONAL, soeMPTSupported},
 }))
 
 /** This transaction type cancels an existing check. */
@@ -409,12 +409,12 @@ TRANSACTION(ttCLAWBACK, 30, Clawback,
 TRANSACTION(ttAMM_CLAWBACK, 31, AMMClawback,
     Delegation::delegable,
     featureAMMClawback,
-    mayDeleteAcct | overrideFreeze,
+    mayDeleteAcct | overrideFreeze | mayAuthorizeMPT,
     ({
     {sfHolder, soeREQUIRED},
-    {sfAsset, soeREQUIRED},
-    {sfAsset2, soeREQUIRED},
-    {sfAmount, soeOPTIONAL},
+    {sfAsset, soeREQUIRED, soeMPTSupported},
+    {sfAsset2, soeREQUIRED, soeMPTSupported},
+    {sfAmount, soeOPTIONAL, soeMPTSupported},
 }))
 
 /** This transaction type creates an AMM instance */
@@ -424,10 +424,10 @@ TRANSACTION(ttAMM_CLAWBACK, 31, AMMClawback,
 TRANSACTION(ttAMM_CREATE, 35, AMMCreate,
     Delegation::delegable,
     featureAMM,
-    createPseudoAcct,
+    createPseudoAcct | mayCreateMPT,
     ({
-    {sfAmount, soeREQUIRED},
-    {sfAmount2, soeREQUIRED},
+    {sfAmount, soeREQUIRED, soeMPTSupported},
+    {sfAmount2, soeREQUIRED, soeMPTSupported},
     {sfTradingFee, soeREQUIRED},
 }))
 
@@ -440,10 +440,10 @@ TRANSACTION(ttAMM_DEPOSIT, 36, AMMDeposit,
     featureAMM,
     noPriv,
     ({
-    {sfAsset, soeREQUIRED},
-    {sfAsset2, soeREQUIRED},
-    {sfAmount, soeOPTIONAL},
-    {sfAmount2, soeOPTIONAL},
+    {sfAsset, soeREQUIRED, soeMPTSupported},
+    {sfAsset2, soeREQUIRED, soeMPTSupported},
+    {sfAmount, soeOPTIONAL, soeMPTSupported},
+    {sfAmount2, soeOPTIONAL, soeMPTSupported},
     {sfEPrice, soeOPTIONAL},
     {sfLPTokenOut, soeOPTIONAL},
     {sfTradingFee, soeOPTIONAL},
@@ -456,12 +456,12 @@ TRANSACTION(ttAMM_DEPOSIT, 36, AMMDeposit,
 TRANSACTION(ttAMM_WITHDRAW, 37, AMMWithdraw,
     Delegation::delegable,
     featureAMM,
-    mayDeleteAcct,
+    mayDeleteAcct | mayAuthorizeMPT,
     ({
-    {sfAsset, soeREQUIRED},
-    {sfAsset2, soeREQUIRED},
-    {sfAmount, soeOPTIONAL},
-    {sfAmount2, soeOPTIONAL},
+    {sfAsset, soeREQUIRED, soeMPTSupported},
+    {sfAsset2, soeREQUIRED, soeMPTSupported},
+    {sfAmount, soeOPTIONAL, soeMPTSupported},
+    {sfAmount2, soeOPTIONAL, soeMPTSupported},
     {sfEPrice, soeOPTIONAL},
     {sfLPTokenIn, soeOPTIONAL},
 }))
@@ -475,8 +475,8 @@ TRANSACTION(ttAMM_VOTE, 38, AMMVote,
     featureAMM,
     noPriv,
     ({
-    {sfAsset, soeREQUIRED},
-    {sfAsset2, soeREQUIRED},
+    {sfAsset, soeREQUIRED, soeMPTSupported},
+    {sfAsset2, soeREQUIRED, soeMPTSupported},
     {sfTradingFee, soeREQUIRED},
 }))
 
@@ -489,8 +489,8 @@ TRANSACTION(ttAMM_BID, 39, AMMBid,
     featureAMM,
     noPriv,
     ({
-    {sfAsset, soeREQUIRED},
-    {sfAsset2, soeREQUIRED},
+    {sfAsset, soeREQUIRED, soeMPTSupported},
+    {sfAsset2, soeREQUIRED, soeMPTSupported},
     {sfBidMin, soeOPTIONAL},
     {sfBidMax, soeOPTIONAL},
     {sfAuthAccounts, soeOPTIONAL},
@@ -503,10 +503,10 @@ TRANSACTION(ttAMM_BID, 39, AMMBid,
 TRANSACTION(ttAMM_DELETE, 40, AMMDelete,
     Delegation::delegable,
     featureAMM,
-    mustDeleteAcct,
+    mustDeleteAcct | mayDeleteMPT,
     ({
-    {sfAsset, soeREQUIRED},
-    {sfAsset2, soeREQUIRED},
+    {sfAsset, soeREQUIRED, soeMPTSupported},
+    {sfAsset2, soeREQUIRED, soeMPTSupported},
 }))
 
 /** This transactions creates a crosschain sequence number */

include/xrpl/protocol/digest.h

@@ -100,7 +100,7 @@ using sha512_hasher = openssl_sha512_hasher;
 /** Returns the RIPEMD-160 digest of the SHA256 hash of the message.
 
     This operation is used to compute the 160-bit identifier
-    representing a Ripple account, from a message. Typically the
+    representing an XRPL account, from a message. Typically the
     message is the public key of the account - which is not
     stored in the account root.
 

include/xrpl/protocol/jss.h

@@ -401,6 +401,8 @@ JSS(min_ledger);                  // in: LedgerCleaner
 JSS(minimum_fee);                 // out: TxQ
 JSS(minimum_level);               // out: TxQ
 JSS(missingCommand);              // error
+JSS(mpt_issuance_id_a);           // out: BookChanges
+JSS(mpt_issuance_id_b);           // out: BookChanges
 JSS(name);                        // out: AmendmentTableImpl, PeerImp
 JSS(needed_state_hashes);         // out: InboundLedger
 JSS(needed_transaction_hashes);   // out: InboundLedger
@@ -511,7 +513,7 @@ JSS(response);                    // websocket
 JSS(result);                      // RPC
 JSS(ripple_lines);                // out: NetworkOPs
 JSS(ripple_state);                // in: LedgerEntr
-JSS(ripplerpc);                   // ripple RPC version
+JSS(ripplerpc);                   // XRPL RPC version
 JSS(role);                        // out: Ping.cpp
 JSS(rpc);                         //
 JSS(rt_accounts);                 // in: Subscribe, Unsubscribe

include/xrpl/protocol_autogen/ledger_entries/DirectoryNode.h

@@ -117,6 +117,30 @@ public:
         return this->sle_->isFieldPresent(sfTakerPaysIssuer);
     }
 
+    /**
+     * @brief Get sfTakerPaysMPT (soeOPTIONAL)
+     * @return The field value, or std::nullopt if not present.
+     */
+    [[nodiscard]]
+    protocol_autogen::Optional<SF_UINT192::type::value_type>
+    getTakerPaysMPT() const
+    {
+        if (hasTakerPaysMPT())
+            return this->sle_->at(sfTakerPaysMPT);
+        return std::nullopt;
+    }
+
+    /**
+     * @brief Check if sfTakerPaysMPT is present.
+     * @return True if the field is present, false otherwise.
+     */
+    [[nodiscard]]
+    bool
+    hasTakerPaysMPT() const
+    {
+        return this->sle_->isFieldPresent(sfTakerPaysMPT);
+    }
+
     /**
      * @brief Get sfTakerGetsCurrency (soeOPTIONAL)
      * @return The field value, or std::nullopt if not present.
@@ -165,6 +189,30 @@ public:
         return this->sle_->isFieldPresent(sfTakerGetsIssuer);
     }
 
+    /**
+     * @brief Get sfTakerGetsMPT (soeOPTIONAL)
+     * @return The field value, or std::nullopt if not present.
+     */
+    [[nodiscard]]
+    protocol_autogen::Optional<SF_UINT192::type::value_type>
+    getTakerGetsMPT() const
+    {
+        if (hasTakerGetsMPT())
+            return this->sle_->at(sfTakerGetsMPT);
+        return std::nullopt;
+    }
+
+    /**
+     * @brief Check if sfTakerGetsMPT is present.
+     * @return True if the field is present, false otherwise.
+     */
+    [[nodiscard]]
+    bool
+    hasTakerGetsMPT() const
+    {
+        return this->sle_->isFieldPresent(sfTakerGetsMPT);
+    }
+
     /**
      * @brief Get sfExchangeRate (soeOPTIONAL)
      * @return The field value, or std::nullopt if not present.
@@ -427,6 +475,17 @@ public:
         return *this;
     }
 
+    /**
+     * @brief Set sfTakerPaysMPT (soeOPTIONAL)
+     * @return Reference to this builder for method chaining.
+     */
+    DirectoryNodeBuilder&
+    setTakerPaysMPT(std::decay_t<typename SF_UINT192::type::value_type> const& value)
+    {
+        object_[sfTakerPaysMPT] = value;
+        return *this;
+    }
+
     /**
      * @brief Set sfTakerGetsCurrency (soeOPTIONAL)
      * @return Reference to this builder for method chaining.
@@ -449,6 +508,17 @@ public:
         return *this;
     }
 
+    /**
+     * @brief Set sfTakerGetsMPT (soeOPTIONAL)
+     * @return Reference to this builder for method chaining.
+     */
+    DirectoryNodeBuilder&
+    setTakerGetsMPT(std::decay_t<typename SF_UINT192::type::value_type> const& value)
+    {
+        object_[sfTakerGetsMPT] = value;
+        return *this;
+    }
+
     /**
      * @brief Set sfExchangeRate (soeOPTIONAL)
      * @return Reference to this builder for method chaining.

include/xrpl/protocol_autogen/transactions/AMMBid.h

@@ -49,6 +49,7 @@ public:
 
     /**
      * @brief Get sfAsset (soeREQUIRED)
+     * @note This field supports MPT (Multi-Purpose Token) amounts.
      * @return The field value.
      */
     [[nodiscard]]
@@ -60,6 +61,7 @@ public:
 
     /**
      * @brief Get sfAsset2 (soeREQUIRED)
+     * @note This field supports MPT (Multi-Purpose Token) amounts.
      * @return The field value.
      */
     [[nodiscard]]
@@ -192,6 +194,7 @@ public:
 
     /**
      * @brief Set sfAsset (soeREQUIRED)
+     * @note This field supports MPT (Multi-Purpose Token) amounts.
      * @return Reference to this builder for method chaining.
      */
     AMMBidBuilder&
@@ -203,6 +206,7 @@ public:
 
     /**
      * @brief Set sfAsset2 (soeREQUIRED)
+     * @note This field supports MPT (Multi-Purpose Token) amounts.
      * @return Reference to this builder for method chaining.
      */
     AMMBidBuilder&

include/xrpl/protocol_autogen/transactions/AMMClawback.h

@@ -21,7 +21,7 @@ class AMMClawbackBuilder;
  * Type: ttAMM_CLAWBACK (31)
  * Delegable: Delegation::delegable
  * Amendment: featureAMMClawback
- * Privileges: mayDeleteAcct | overrideFreeze
+ * Privileges: mayDeleteAcct | overrideFreeze | mayAuthorizeMPT
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use AMMClawbackBuilder to construct new transactions.
@@ -60,6 +60,7 @@ public:
 
     /**
      * @brief Get sfAsset (soeREQUIRED)
+     * @note This field supports MPT (Multi-Purpose Token) amounts.
      * @return The field value.
      */
     [[nodiscard]]
@@ -71,6 +72,7 @@ public:
 
     /**
      * @brief Get sfAsset2 (soeREQUIRED)
+     * @note This field supports MPT (Multi-Purpose Token) amounts.
      * @return The field value.
      */
     [[nodiscard]]
@@ -82,6 +84,7 @@ public:
 
     /**
      * @brief Get sfAmount (soeOPTIONAL)
+     * @note This field supports MPT (Multi-Purpose Token) amounts.
      * @return The field value, or std::nullopt if not present.
      */
     [[nodiscard]]
@@ -166,6 +169,7 @@ public:
 
     /**
      * @brief Set sfAsset (soeREQUIRED)
+     * @note This field supports MPT (Multi-Purpose Token) amounts.
      * @return Reference to this builder for method chaining.
      */
     AMMClawbackBuilder&
@@ -177,6 +181,7 @@ public:
 
     /**
      * @brief Set sfAsset2 (soeREQUIRED)
+     * @note This field supports MPT (Multi-Purpose Token) amounts.
      * @return Reference to this builder for method chaining.
      */
     AMMClawbackBuilder&
@@ -188,6 +193,7 @@ public:
 
     /**
      * @brief Set sfAmount (soeOPTIONAL)
+     * @note This field supports MPT (Multi-Purpose Token) amounts.
      * @return Reference to this builder for method chaining.
      */
     AMMClawbackBuilder&

include/xrpl/protocol_autogen/transactions/AMMCreate.h

@@ -21,7 +21,7 @@ class AMMCreateBuilder;
  * Type: ttAMM_CREATE (35)
  * Delegable: Delegation::delegable
  * Amendment: featureAMM
- * Privileges: createPseudoAcct
+ * Privileges: createPseudoAcct | mayCreateMPT
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use AMMCreateBuilder to construct new transactions.
@@ -49,6 +49,7 @@ public:
 
     /**
      * @brief Get sfAmount (soeREQUIRED)
+     * @note This field supports MPT (Multi-Purpose Token) amounts.
      * @return The field value.
      */
     [[nodiscard]]
@@ -60,6 +61,7 @@ public:
 
     /**
      * @brief Get sfAmount2 (soeREQUIRED)
+     * @note This field supports MPT (Multi-Purpose Token) amounts.
      * @return The field value.
      */
     [[nodiscard]]
@@ -129,6 +131,7 @@ public:
 
     /**
      * @brief Set sfAmount (soeREQUIRED)
+     * @note This field supports MPT (Multi-Purpose Token) amounts.
      * @return Reference to this builder for method chaining.
      */
     AMMCreateBuilder&
@@ -140,6 +143,7 @@ public:
 
     /**
      * @brief Set sfAmount2 (soeREQUIRED)
+     * @note This field supports MPT (Multi-Purpose Token) amounts.
      * @return Reference to this builder for method chaining.
      */
     AMMCreateBuilder&

include/xrpl/protocol_autogen/transactions/AMMDelete.h

@@ -21,7 +21,7 @@ class AMMDeleteBuilder;
  * Type: ttAMM_DELETE (40)
  * Delegable: Delegation::delegable
  * Amendment: featureAMM
- * Privileges: mustDeleteAcct
+ * Privileges: mustDeleteAcct | mayDeleteMPT
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use AMMDeleteBuilder to construct new transactions.
@@ -49,6 +49,7 @@ public:
 
     /**
      * @brief Get sfAsset (soeREQUIRED)
+     * @note This field supports MPT (Multi-Purpose Token) amounts.
      * @return The field value.
      */
     [[nodiscard]]
@@ -60,6 +61,7 @@ public:
 
     /**
      * @brief Get sfAsset2 (soeREQUIRED)
+     * @note This field supports MPT (Multi-Purpose Token) amounts.
      * @return The field value.
      */
     [[nodiscard]]
@@ -116,6 +118,7 @@ public:
 
     /**
      * @brief Set sfAsset (soeREQUIRED)
+     * @note This field supports MPT (Multi-Purpose Token) amounts.
      * @return Reference to this builder for method chaining.
      */
     AMMDeleteBuilder&
@@ -127,6 +130,7 @@ public:
 
     /**
      * @brief Set sfAsset2 (soeREQUIRED)
+     * @note This field supports MPT (Multi-Purpose Token) amounts.
      * @return Reference to this builder for method chaining.
      */
     AMMDeleteBuilder&