fix: Make NodePathStack fail closed when assertions are compiled out

The stack asserted its preconditions and then went ahead regardless. Asserts
expand to `assert`, so in a release build every one of those was a no-op in
front of the operation it was guarding: reading or popping an empty
`std::stack` is undefined, `pushChild`'s out-of-range branch check was missing
entirely, and `getChildNodeID` throws `std::logic_error` at leaf depth. None
of these conditions are reachable through any of `SHAMap`'s public entry
points today, but the failure modes if they ever did happen would be
disproportionate: an out-of-range branch would silently corrupt a node ID
instead of failing loudly, and a `logic_error` reaching an unguarded call
chain would abort the process, since nothing in this codebase catches it.

Pushes now return false instead of throwing or silently corrupting the ID, and
reads degrade to a null node rather than undefined behavior. `[[nodiscard]]`
makes an unchecked push a compile error. Each new guard is marked
`UNREACHABLE` rather than left implicitly untested, since no test fixture in
this suite can reach these paths without building a deliberately corrupt map.
`pushRoot` gets the same conversion as every sibling method; it was the one
push still asserting instead of returning false.

`walkTowardsKey`'s two modes (with and without a caller-supplied stack) must
fail at the same node and leave the stack in a state every caller already
knows how to handle; on failure the stack is now cleared via a restored
`clear()`, and a restored `pushCurrent` lambda keeps the loop-entry and
post-loop push-and-clear logic from being duplicated. It also stops deriving
each node ID twice: a caller-supplied stack now reads the ID `pushNode` just
computed off `stack->top().second`, instead of a redundant local copy that
additionally went stale once the loop exited. `belowHelper` and
`peekNextItem` finally get the fallback `top()`'s own docstring promises: both
read `stack.top()` right after an assert-only emptiness check, with no
fallback for release builds, so both now return early on an empty stack
instead of dereferencing a null `SHAMapTreeNodePtr`.

`pushChild`'s hard guard also only checked the parent's depth against
`kLeafDepth`, one level too permissive for an inner child: a parent at 63
passed the check, then pushed an inner child at 64 with only a debug-only
assert catching it, the exact gap this commit exists to close. Tightened to
require depth + 1 below `kLeafDepth` for an inner child, with
`walkTowardsKey`'s no-stack path given the identical tightening so a
malformed map fails at the same node in both modes.

`walkTowardsKey`'s own empty-stack precondition had the same gap: only an
`XRPL_ASSERT` enforced it, so a non-empty caller-supplied stack would silently
be appended to instead of failing closed. Guarded the same way as everything
else here, and `peekFirstItem`'s comment on the failure path is corrected to
match: it clears the stack unconditionally, not only for an empty map.

.cspell.config.yaml

@@ -366,6 +366,7 @@ words:
   - venv
   - vfalco
   - vinnie
+  - vkeylet
   - wasmi
   - wextra
   - wptr

.envrc

@@ -1,5 +1,8 @@
 watch_file nix/*.nix
 
+# Pinned Rust toolchain, read by nix/packages.nix via fromRustupToolchainFile.
+watch_file rust-toolchain.toml
+
 # The dev shell derivation includes all of conan/ (see nix/devshell.nix), so any
 # change in there has to invalidate direnv's cached environment.
 watch_dir conan

.github/actions/cargo-cache/action.yml

@@ -20,9 +20,10 @@ inputs:
     required: false
     default: ""
   save-if:
-    description: "Condition for saving the cache after the job."
+    description: >
+      Condition for saving the cache after the job. Defaults to save only from develop branch
     required: false
-    default: "true"
+    default: ${{ github.ref == 'refs/heads/develop' }}
 
 runs:
   using: composite

.github/scripts/strategy-matrix/generate.py

@@ -57,7 +57,9 @@ class LinuxConfig:
     sanitizers: list[str] = dataclasses.field(default_factory=list)
     suffix: str = ""
     extra_cmake_args: str = ""
-    image: str = ""  # only used by package_configs entries
+    # The two below are only used by package_configs entries.
+    image: str = ""
+    package_type: str = ""  # "deb" or "rpm"; has to match what image provides
 
 
 @dataclasses.dataclass
@@ -156,7 +158,7 @@ class PackagingEntry:
     xrpld_artifact_name: str
     validator_keys_artifact_name: str
     image: str
-    distro: str  # e.g. "debian" or "rhel"; drives package-format-specific steps
+    package_type: str  # "deb" or "rpm"; drives the format-specific steps
 
 
 # ---------------------------------------------------------------------------
@@ -243,7 +245,7 @@ def expand_linux_packaging(linux: LinuxFile) -> list[PackagingEntry]:
                         xrpld_artifact_name=f"xrpld-{config_name}",
                         validator_keys_artifact_name=f"validator-keys-{config_name}",
                         image=cfg.image,
-                        distro=distro,
+                        package_type=cfg.package_type,
                     )
                 )
 

.github/scripts/strategy-matrix/linux.json

@@ -92,7 +92,8 @@
         "build_type": ["Release"],
         "arch": ["amd64"],
         "minimal": false,
-        "image": "ghcr.io/xrplf/xrpld/packaging-debian:sha-a6983f8"
+        "image": "ghcr.io/xrplf/xrpld/packaging-debian:sha-45e4b88",
+        "package_type": "deb"
       }
     ],
 
@@ -102,7 +103,8 @@
         "build_type": ["Release"],
         "arch": ["amd64"],
         "minimal": false,
-        "image": "ghcr.io/xrplf/xrpld/packaging-rhel:sha-a6983f8"
+        "image": "ghcr.io/xrplf/xrpld/packaging-rhel:sha-45e4b88",
+        "package_type": "rpm"
       }
     ]
   }

.github/workflows/build-packaging-images.yml

@@ -33,12 +33,14 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
+        # Newest of each distro: these images only wrap pre-built binaries, so
+        # they set no floor for consumers. build_pkg.py pins the RPM dist tag.
         distro:
           - name: debian
-            base_image: debian:bookworm
-          # AlmaLinux rather than UBI9, which does not ship rpm-sign.
+            base_image: debian:trixie
+          # AlmaLinux rather than UBI, which does not ship rpm-sign.
           - name: rhel
-            base_image: almalinux:9
+            base_image: almalinux:10
     uses: XRPLF/actions/.github/workflows/build-multiarch-image.yml@65d5a0bd72be4ecea95cff0673a6e0672ab5243a
     with:
       image_name: xrpld/packaging-${{ matrix.distro.name }}

.github/workflows/reusable-build-test-config.yml

@@ -167,7 +167,6 @@ jobs:
         with:
           cache-directories: ${{ env.BUILD_DIR }}/corrosion
           key: ${{ inputs.config_name }}
-          save-if: ${{ github.ref == 'refs/heads/develop' || startsWith(github.ref, 'refs/heads/release') }}
           # two workspaces here because build artifacts are located in 2 places:
           # - crates/target when cargo is called directly
           # - build/cargo when cargo is called by cmake

.github/workflows/reusable-clang-tidy.yml

@@ -63,7 +63,6 @@ jobs:
         uses: ./.github/actions/cargo-cache
         with:
           cache-directories: ${{ env.BUILD_DIR }}/corrosion
-          save-if: ${{ github.ref == 'refs/heads/develop' || startsWith(github.ref, 'refs/heads/release') }}
           workspaces: crates -> ../${{ env.BUILD_DIR }}/cargo
 
       - name: Setup Conan

.github/workflows/reusable-package.yml

@@ -1,9 +1,9 @@
 # Build Linux packages from the pre-built xrpld and validator-keys artifacts:
 #
 #   - one job per distro, taken from "package_configs" in linux.json
-#   - each job runs in that distro's container, which is what decides DEB or RPM
+#   - each entry names its container image and the format it builds there
 #   - with 'publish: true' a job also uploads what it built
-#     (see package/publish_pkg.sh)
+#     (see package/publish_pkg.py)
 #
 # Only linux/amd64 is supported; the runner is hardcoded in the job below.
 name: Package
@@ -97,17 +97,23 @@ jobs:
 
       - name: Build package
         env:
+          PACKAGE_TYPE: ${{ matrix.package_type }}
           PKG_RELEASE: ${{ steps.release_info.outputs.pkg_release }}
-          PKG_CHANNEL: ${{ steps.release_info.outputs.channel }}
-        run: ./package/build_pkg.sh
+          CHANNEL: ${{ steps.release_info.outputs.channel }}
+        run: |
+          ./package/build_pkg.py \
+              --package-type "${PACKAGE_TYPE}" \
+              --build-dir "${BUILD_DIR}" \
+              --pkg-release "${PKG_RELEASE}" \
+              --channel "${CHANNEL}"
 
       # Before the upload, so the artifact and the published package are the
       # same bytes. DEBs are not signed, so the key is never set on that job.
       - name: Sign RPM
-        if: ${{ inputs.publish && matrix.distro == 'rhel' }}
+        if: ${{ inputs.publish && matrix.package_type == 'rpm' }}
         env:
           PKG_SIGNING_KEY: ${{ secrets.signing_key }}
-        run: ./package/sign_rpm.sh "${BUILD_DIR}"
+        run: ./package/sign_rpm.py --package-dir "${BUILD_DIR}"
 
       - name: Upload package artifact
         uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
@@ -126,4 +132,8 @@ jobs:
           NEXUS_URL: ${{ inputs.nexus_url }}
           NEXUS_USERNAME: ${{ secrets.remote_username }}
           NEXUS_PASSWORD: ${{ secrets.remote_password }}
-        run: ./package/publish_pkg.sh "${CHANNEL}" "${BUILD_DIR}"
+        run: |
+          ./package/publish_pkg.py \
+              --channel "${CHANNEL}" \
+              --package-dir "${BUILD_DIR}" \
+              --nexus-url "${NEXUS_URL}"

.pre-commit-config.yaml

@@ -82,11 +82,27 @@ repos:
       - id: prettier
         args: [--end-of-line=auto]
 
+  # Scoped to package/: the rest of the repo's Python has pre-existing findings,
+  # so widening these is its own change.
+  - repo: https://github.com/astral-sh/ruff-pre-commit
+    rev: 7c55798a78262d14b2074abf623d8a992ebb70d4 # frozen: v0.16.2
+    hooks:
+      - id: ruff-check
+        args: [--fix]
+        files: ^package/.*\.py$
+
   - repo: https://github.com/psf/black-pre-commit-mirror
     rev: 4160603246a6b365d4a2af661c6d71b0a0f50478 # frozen: 26.5.1
     hooks:
       - id: black
 
+  - repo: https://github.com/pre-commit/mirrors-mypy
+    rev: 41e691678310dfd3833f7ab4e180ddb014310356 # frozen: v2.3.0
+    hooks:
+      - id: mypy
+        args: [--strict]
+        files: ^package/.*\.py$
+
   - repo: https://github.com/scop/pre-commit-shfmt
     rev: 05c1426671b9237fb5e1444dd63aa5731bec0dfb # frozen: v3.13.1-1
     hooks:

API-CHANGELOG.md

@@ -54,6 +54,9 @@ This section contains changes targeting a future version.
 - `submit`: The `fail_hard` field now returns an error if the value is not a boolean. [#6529](https://github.com/XRPLF/rippled/pull/6529)
 - `subscribe`: The `taker` field in the `books` array now returns `actMalformed` instead of `badIssuer` if the value is not a valid account. [#6529](https://github.com/XRPLF/rippled/pull/6529)
 - Fixed a bug in `Forwarded` HTTP header parsing where the extracted IP address could be incorrect when no comma or semicolon delimiter follows the address. This could cause the server to misidentify a client's IP address when operating behind a reverse proxy. [#6529](https://github.com/XRPLF/rippled/pull/6529)
+- `vault_info`: Errors now identify what the request got wrong instead of reporting every failure as the unregistered token `malformedRequest`, and the `error`, `error_code` and `error_message` fields now agree with each other. An invalid `vault_id` or `seq` returns `invalidParams`, an invalid `owner` returns `actMalformed`, and a request that mixes `vault_id` with `owner`/`seq` or supplies neither returns `invalidParams` with a message naming the accepted combinations. [#8015](https://github.com/XRPLF/rippled/pull/8015)
+- `vault_info`: A well-formed all-zero `vault_id` now returns `entryNotFound` instead of being rejected as malformed, and `entryNotFound` responses now include `error_code` and `error_message`. Clients that request `ripplerpc` 3.0 or above therefore receive HTTP 400 with that error rather than HTTP 200. [#8015](https://github.com/XRPLF/rippled/pull/8015)
+- `vault_info`: `vault_id` and `owner` must now be strings, matching how `ledger_entry` reads the same fields. An object or an array in either field previously produced an internal error, and a number was silently converted to its decimal text; `vault_id` now returns `invalidParams` and `owner` returns `actMalformed`. [#8015](https://github.com/XRPLF/rippled/pull/8015)
 - `gateway_balances`: The `account` and `ident` fields now return an `invalidParams` error if the value is not a string, instead of an `internal` error. [#7655](https://github.com/XRPLF/rippled/pull/7655)
 - `account_lines`: The `peer` field now returns an error if the value is not a string. [#7728](https://github.com/XRPLF/rippled/pull/7728)
 

cfg/xrpld-example.cfg

@@ -1094,8 +1094,8 @@
 #                           Default is 100.
 #
 #       back_off_milliseconds
-#                           Number of milliseconds to wait between
-#                           online_delete batches to allow other functions
+#                           Number of milliseconds to wait between online_delete
+#                           SQL deletion batches to allow other functions
 #                           to catch up.
 #                           Default is 100.
 #
@@ -1109,10 +1109,22 @@
 #                           The online delete process checks periodically
 #                           that xrpld is still in sync with the network,
 #                           and that the validated ledger is less than
-#                           'age_threshold_seconds' old. If not, then continue
+#                           'age_threshold_seconds' old, and that all
+#                           recent ledgers are available. If not, then continue
 #                           sleeping for this number of seconds and
 #                           checking until healthy.
-#                           Default is 5.
+#                           Default is 2.
+#
+#       max_waiting_ledgers
+#                           The maximum number of ledgers that may be validated
+#                           while online deletion is waiting for the node to get
+#                           fully synced with the rest of the network. If more than
+#                           this number of ledgers are validated while waiting, then
+#                           online deletion gives up on the current ledger and tries
+#                           again later. Note this only affects situations that cause
+#                           rotation to wait, such as going out of sync, or missing
+#                           ledgers. Forward progress is not penalized. Minimum is 64.
+#                           Default is the online_delete value.
 #
 #   Notes:
 #       The 'node_db' entry configures the primary, persistent storage.

cmake/XrplPackaging.cmake

@@ -1,7 +1,7 @@
 #[===================================================================[
    Linux packaging support: 'package' target.
 
-   The packaging script (package/build_pkg.sh) installs to FHS-standard
+   The packaging script (package/build_pkg.py) installs to FHS-standard
    paths (/usr/bin, /etc/xrpld, etc.) regardless of CMAKE_INSTALL_PREFIX,
    so no prefix guard is needed here.
 #]===================================================================]
@@ -38,19 +38,19 @@ if(NOT TARGET validator-keys)
     return()
 endif()
 
-set(package_env
-    SRC_DIR=${CMAKE_SOURCE_DIR}
-    BUILD_DIR=${CMAKE_BINARY_DIR}
-    PKG_RELEASE=${pkg_release}
-)
+if(DPKG_BUILDPACKAGE_EXECUTABLE)
+    set(pkg_type deb)
+else()
+    set(pkg_type rpm)
+endif()
 
 add_custom_target(
     package
     COMMAND
-        ${CMAKE_COMMAND} -E env ${package_env}
-        ${CMAKE_SOURCE_DIR}/package/build_pkg.sh
+        ${CMAKE_SOURCE_DIR}/package/build_pkg.py --package-type ${pkg_type}
+        --build-dir ${CMAKE_BINARY_DIR} --pkg-release ${pkg_release}
     WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
     DEPENDS xrpld validator-keys
-    COMMENT "Building Linux package (deb/rpm inferred from host tooling)"
+    COMMENT "Building Linux ${pkg_type} package"
     VERBATIM
 )

cmake/scripts/codegen/generate_tx_classes.py

@@ -8,6 +8,7 @@ Uses pcpp to preprocess the macro file and pyparsing to parse the DSL.
 
 import io
 import argparse
+import re
 from pathlib import Path
 import pyparsing as pp
 
@@ -53,28 +54,89 @@ def create_transaction_parser():
     return macro_parser
 
 
+# Defaults for xrpl::TxSettings members, mirroring
+# include/xrpl/protocol/TxSettings.h. A transaction's settings blob only names
+# the members that differ from these.
+SETTING_DEFAULTS = {
+    "delegable": "Delegation::NotDelegable",
+    "amendment": "uint256{}",
+    "privileges": "Privilege::NoPriv",
+}
+
+
+def parse_settings(settings_str):
+    """Parse a TxSettings blob into a dict, filling in defaults.
+
+    Args:
+        settings_str: A string like '({.delegable = Delegation::NotDelegable,
+                      .privileges = Privilege::CreateAcct})', or '({})'.
+
+    Returns:
+        A dict with a value for every key in SETTING_DEFAULTS.
+    """
+    body = settings_str.strip()
+    if not (body.startswith("(") and body.endswith(")")):
+        raise ValueError(
+            f"Malformed settings blob, expected '({{...}})': {settings_str!r}"
+        )
+    body = body[1:-1].strip()
+    if not (body.startswith("{") and body.endswith("}")):
+        raise ValueError(
+            f"Malformed settings blob, expected '({{...}})': {settings_str!r}"
+        )
+    body = body[1:-1]
+
+    # Strip comments, which may be interleaved with the designated initializers.
+    body = re.sub(r"//[^\n]*", "", body)
+
+    settings = dict(SETTING_DEFAULTS)
+    seen = set()
+    # Each entry runs from '.key =' up to the next '.key =' or the end.
+    for key, value in re.findall(
+        r"\.(\w+)\s*=\s*(.*?)(?=,\s*\.\w+\s*=|,?\s*$)", body, re.S
+    ):
+        if key not in SETTING_DEFAULTS:
+            raise ValueError(f"Unknown TxSettings member '.{key}' in {settings_str!r}")
+        settings[key] = " ".join(value.split()).rstrip(",")
+        seen.add(key)
+
+    # Catch a typo'd or unparsed initializer rather than silently defaulting it.
+    # Every '.member' in the blob must have been consumed above.
+    if len(re.findall(r"\.\w+", body)) != len(seen):
+        raise ValueError(f"Could not parse every setting in {settings_str!r}")
+
+    # A blob with content but no designated initializer is positional, which
+    # would otherwise be read as "all defaults" and silently generate the
+    # wrong output.
+    if body.strip() and not seen:
+        raise ValueError(
+            "TxSettings requires designated initializers (.member = value), "
+            f"got {settings_str!r}"
+        )
+
+    return settings
+
+
 def parse_transaction_args(args_list):
     """Parse the arguments of a TRANSACTION macro call.
 
     Args:
         args_list: A list of parsed arguments from pyparsing, e.g.,
-                   ['ttPAYMENT', '0', 'Payment', 'Delegation::delegable',
-                    'uint256{}', 'createAcct', '({...})']
+                   ['ttPAYMENT', '0', 'Payment',
+                    '({.privileges = Privilege::CreateAcct})', '({...})']
 
     Returns:
         A dict with parsed transaction information.
     """
-    if len(args_list) < 7:
+    if len(args_list) < 5:
         raise ValueError(
-            f"Expected at least 7 parts in TRANSACTION, got {len(args_list)}: {args_list}"
+            f"Expected at least 5 parts in TRANSACTION, got {len(args_list)}: {args_list}"
         )
 
     tag = args_list[0]
     value = args_list[1]
     name = args_list[2]
-    delegable = args_list[3]
-    amendments = args_list[4]
-    privileges = args_list[5]
+    settings = parse_settings(args_list[3])
     fields_str = args_list[-1]
 
     # Parse fields: ({field1, field2, ...})
@@ -84,9 +146,9 @@ def parse_transaction_args(args_list):
         "tag": tag,
         "value": value,
         "name": name,
-        "delegable": delegable,
-        "amendments": amendments,
-        "privileges": privileges,
+        "delegable": settings["delegable"],
+        "amendments": settings["amendment"],
+        "privileges": settings["privileges"],
         "fields": fields,
     }
 

docs/install.md

@@ -92,11 +92,11 @@ wherever it appears in the repository configuration.
 2.  Add the repository, using the channel you picked in [Release channels](#release-channels):
 
     ```bash
-    cat << REPOFILE | sudo tee /etc/yum.repos.d/xrplf.repo
+    cat << 'REPOFILE' | sudo tee /etc/yum.repos.d/xrplf.repo
     [xrplf-stable]
     name=XRP Ledger Packages
     enabled=1
-    baseurl=https://packages.xrplf.org/repository/rpm-stable/
+    baseurl=https://packages.xrplf.org/repository/rpm-stable/$basearch/
     gpgcheck=1
     repo_gpgcheck=1
     gpgkey=https://packages.xrplf.org/xrplf.asc

include/xrpl/beast/net/IPAddress.h

@@ -103,7 +103,7 @@ namespace boost {
 template <>
 struct hash<::beast::ip::Address>
 {
-    explicit hash() = default;
+    hash() = default;
 
     std::size_t
     operator()(::beast::ip::Address const& addr) const

include/xrpl/config/Constants.h

@@ -125,6 +125,7 @@ struct Keys
     static constexpr auto kMaximumTxnInLedger = "maximum_txn_in_ledger";
     static constexpr auto kMaximumTxnPerAccount = "maximum_txn_per_account";
     static constexpr auto kMemoryLevel = "memory_level";
+    static constexpr auto kMaxWaitingLedgers = "max_waiting_ledgers";
     static constexpr auto kMinLedgersToComputeSizeLimit = "min_ledgers_to_compute_size_limit";
     static constexpr auto kMinimumEscalationMultiplier = "minimum_escalation_multiplier";
     static constexpr auto kMinimumLastLedgerBuffer = "minimum_last_ledger_buffer";

include/xrpl/ledger/View.h

@@ -24,6 +24,7 @@
 #include <optional>
 #include <set>
 #include <utility>
+#include <vector>
 
 namespace xrpl {
 
@@ -198,7 +199,10 @@ dirLink(
  *      if withdrawing to self.
  *    - If withdrawing to self, succeed.
  *    - If not, checks if the receiver requires deposit authorization, and if
- *      the sender has it.
+ *      the sender has it (account-based or credential-based).
+ *    - Expects any credentials passed in to already exist in the ledger, and
+ *      returns an internal error otherwise. Validate them beforehand with
+ *      credentials::valid().
  *    - Checks that the receiver will not exceed the limit (IOU trustline limit
  *      or MPT MaximumAmount).
  */
@@ -209,7 +213,8 @@ canWithdraw(
     AccountID const& to,
     SLE::const_ref toSle,
     STAmount const& amount,
-    bool hasDestinationTag);
+    bool hasDestinationTag,
+    std::optional<std::vector<uint256>> const& credentialIDs = std::nullopt);
 
 /**
  * Checks that can withdraw funds from an object to itself or a destination.
@@ -222,7 +227,10 @@ canWithdraw(
  *      if withdrawing to self.
  *    - If withdrawing to self, succeed.
  *    - If not, checks if the receiver requires deposit authorization, and if
- *      the sender has it.
+ *      the sender has it (account-based or credential-based).
+ *    - Expects any credentials passed in to already exist in the ledger, and
+ *      returns an internal error otherwise. Validate them beforehand with
+ *      credentials::valid().
  *    - Checks that the receiver will not exceed the limit (IOU trustline limit
  *      or MPT MaximumAmount).
  */
@@ -232,20 +240,25 @@ canWithdraw(
     AccountID const& from,
     AccountID const& to,
     STAmount const& amount,
-    bool hasDestinationTag);
+    bool hasDestinationTag,
+    std::optional<std::vector<uint256>> const& credentialIDs = std::nullopt);
 
 /**
  * Checks that can withdraw funds from an object to itself or a destination.
  *
  * The receiver may be either the submitting account (sfAccount) or a different
- * destination account (sfDestination).
+ * destination account (sfDestination). Credentials, if any, are taken from the
+ * transaction's sfCredentialIDs field.
  *
  *    - Checks that the receiver account exists.
  *    - If the receiver requires a destination tag, check that one exists, even
  *      if withdrawing to self.
  *    - If withdrawing to self, succeed.
  *    - If not, checks if the receiver requires deposit authorization, and if
- *      the sender has it.
+ *      the sender has it (account-based or credential-based).
+ *    - Expects any credentials in sfCredentialIDs to already exist in the
+ *      ledger, and returns an internal error otherwise. Validate them
+ *      beforehand with credentials::valid().
  *    - Checks that the receiver will not exceed the limit (IOU trustline limit
  *      or MPT MaximumAmount).
  */

include/xrpl/ledger/helpers/CredentialHelpers.h

@@ -14,6 +14,7 @@
 #include <xrpl/protocol/STVector256.h>
 #include <xrpl/protocol/TER.h>
 
+#include <cstdint>
 #include <memory>
 #include <set>
 #include <utility>
@@ -33,6 +34,32 @@ checkExpired(SLE const& sleCredential, NetClock::time_point const& closed);
 [[nodiscard]] TER
 deleteSLE(ApplyView& view, SLE::ref sleCredential, beast::Journal j);
 
+/**
+ * @brief Remove credentials pinned to a pseudo-account's owner directory.
+ *
+ * Cleans up credentials that were linked to a pseudo-account (Vault, LoanBroker,
+ * AMM), which such an account can neither accept nor delete. Only credentials
+ * are removed; every other object is left in place. The walk visits at most
+ * @p maxNodesToDelete directory entries and charges the ones it leaves alone
+ * against that budget too, so a directory holding other objects yields fewer
+ * than @p maxNodesToDelete deletions. On reaching the bound the result is
+ * `tecINCOMPLETE` and the caller must propagate it so a later transaction
+ * resumes.
+ *
+ * @param view Mutable ledger view.
+ * @param pseudoAcct The pseudo-account whose directory is cleaned.
+ * @param maxNodesToDelete Upper bound on directory entries processed in one call.
+ * @param j Journal for diagnostics.
+ * @return tesSUCCESS once no credentials remain, tecINCOMPLETE if the bound was
+ *         reached, or a deletion error.
+ */
+[[nodiscard]] TER
+deletePseudoAccountCredentials(
+    ApplyView& view,
+    AccountID const& pseudoAcct,
+    std::uint16_t maxNodesToDelete,
+    beast::Journal j);
+
 // Amendment and parameters checks for sfCredentialIDs field
 NotTEC
 checkFields(STTx const& tx, Rules const& rules, beast::Journal j);

include/xrpl/ledger/helpers/VaultHelpers.h

@@ -7,6 +7,7 @@
 #include <xrpl/protocol/Protocol.h>
 #include <xrpl/protocol/STAmount.h>
 #include <xrpl/protocol/STLedgerEntry.h>
+#include <xrpl/protocol/TER.h>
 
 #include <cstdint>
 #include <optional>
@@ -238,4 +239,40 @@ getVaultPhase(
     std::optional<std::uint32_t> subscriptionDate,
     std::optional<std::uint32_t> redemptionDate);
 
+/**
+ * Controls whether checkVaultDomain reports an expired credential as an
+ * error. A caller that deletes expired credentials later, in doApply, passes
+ * Yes and treats the subject as authorized; a caller with no such cleanup
+ * step must keep the error.
+ */
+enum class SuppressExpired : bool { No = false, Yes = true };
+
+/**
+ * Checks that subject belongs to the permissioned domain governing a vault's
+ * shares.
+ *
+ * The domain is read from the share issuance rather than from the vault. Vault
+ * shares are issued by the vault's pseudo-account, which cannot grant an
+ * authorization explicitly, so domain membership is the only route to being
+ * authorized: a vault with no domain set has no authorized participants at
+ * all, and every subject fails with tecNO_AUTH.
+ *
+ * Which accounts to check, and whether to check at all, is left to the caller.
+ * This says nothing about vault privacy or about the roles of the accounts.
+ *
+ * @param view The ledger view.
+ * @param issuance The MPTokenIssuance SLE for the vault's shares.
+ * @param subject The account whose domain membership is checked.
+ * @param suppressExpired Whether an expired credential counts as authorized.
+ *
+ * @return tesSUCCESS if the subject is a domain member, otherwise the reason
+ * it is not.
+ */
+[[nodiscard]] TER
+checkVaultDomain(
+    ReadView const& view,
+    SLE::const_ref issuance,
+    AccountID const& subject,
+    SuppressExpired suppressExpired);
+
 }  // namespace xrpl

include/xrpl/protocol/AMMCore.h

@@ -91,6 +91,17 @@ getFee(std::uint16_t tfee)
     return Number{tfee} / kAuctionSlotFeeScaleFactor;
 }
 
+/**
+ * Minimum auction slot price: LPTokens * TradingFee / kAuctionSlotMinFeeFraction
+ * @param lptAMMBalance  AMM LP token balance
+ * @param tradingFee     trading fee in {0, 1000}
+ */
+inline Number
+ammAuctionMinSlotPrice(Number const& lptAMMBalance, std::uint16_t tradingFee)
+{
+    return lptAMMBalance * getFee(tradingFee) / kAuctionSlotMinFeeFraction;
+}
+
 /**
  * Get fee multiplier (1 - tfee)
  * @tfee trading fee in basis points

include/xrpl/protocol/Book.h

@@ -133,7 +133,7 @@ private:
     using id_hash_type = boost::base_from_member<std::hash<xrpl::MPTID>, 0>;
 
 public:
-    explicit hash() = default;
+    hash() = default;
 
     using value_type = std::size_t;
     using argument_type = xrpl::MPTIssue;
@@ -160,7 +160,7 @@ private:
     mptissue_hasher mMptissueHasher_;
 
 public:
-    explicit hash() = default;
+    hash() = default;
 
     value_type
     operator()(argument_type const& asset) const
@@ -227,7 +227,7 @@ struct hash<xrpl::Issue> : std::hash<xrpl::Issue>
 template <>
 struct hash<xrpl::MPTIssue> : std::hash<xrpl::MPTIssue>
 {
-    explicit hash() = default;
+    hash() = default;
 
     using Base = std::hash<xrpl::MPTIssue>;
 };
@@ -235,7 +235,7 @@ struct hash<xrpl::MPTIssue> : std::hash<xrpl::MPTIssue>
 template <>
 struct hash<xrpl::Asset> : std::hash<xrpl::Asset>
 {
-    explicit hash() = default;
+    hash() = default;
 
     using Base = std::hash<xrpl::Asset>;
 };

include/xrpl/protocol/MPTIssue.h

@@ -151,7 +151,7 @@ namespace std {
 template <>
 struct hash<xrpl::MPTID> : xrpl::MPTID::hasher
 {
-    explicit hash() = default;
+    hash() = default;
 };
 
 }  // namespace std

include/xrpl/protocol/Permissions.h

@@ -4,6 +4,7 @@
 #include <xrpl/protocol/Rules.h>
 #include <xrpl/protocol/SOTemplate.h>
 #include <xrpl/protocol/TxFormats.h>
+#include <xrpl/protocol/TxSettings.h>
 
 #include <cstdint>
 #include <functional>
@@ -38,11 +39,6 @@ enum GranularPermissionType : std::uint32_t {
 #pragma pop_macro("GRANULAR_PERMISSION")
 };
 
-// Injected bare enumerators (xrpl::delegable / xrpl::notDelegable) are required by preprocessor
-// tricks in tests and macro-generated code; enum class would break that.
-// NOLINTNEXTLINE(cppcoreguidelines-use-enum-class)
-enum Delegation { Delegable, NotDelegable };
-
 class Permission
 {
 private:
@@ -65,7 +61,7 @@ private:
     struct TxDelegationEntry
     {
         uint256 amendment;
-        Delegation delegable{NotDelegable};
+        Delegation delegable{Delegation::NotDelegable};
     };
 
     std::unordered_set<TxType> granularTxTypes_;

include/xrpl/protocol/Protocol.h

@@ -396,6 +396,16 @@ using TxID = uint256;
  */
 constexpr std::uint16_t kMaxDeletableAmmTrustLines = 512;
 
+/**
+ * The maximum number of owner-directory entries to walk when clearing
+ * credentials pinned to a pseudo-account, in a single transaction.
+ *
+ * The walk stops after this many entries whether or not each one turns out to
+ * be a credential, so a directory that also holds other objects yields fewer
+ * deletions per transaction.
+ */
+constexpr std::uint16_t kMaxDeletablePseudoAccountCredentials = 512;
+
 /**
  * The maximum length of a URI inside an Oracle
  */

include/xrpl/protocol/STLedgerEntry.h

@@ -19,7 +19,7 @@ namespace xrpl {
 
 class Rules;
 namespace test {
-class Invariants_test;
+class InvariantsMisc_test;
 }  // namespace test
 
 class STLedgerEntry final : public STObject, public CountedObject<STLedgerEntry>
@@ -83,8 +83,8 @@ private:
     void
     setSLEType();
 
-    friend test::Invariants_test;  // this test wants access to the private
-                                   // type_
+    friend test::InvariantsMisc_test;  // this test wants access to the
+                                       // private type_
 
     STBase*
     copy(std::size_t n, void* buf) const override;

include/xrpl/protocol/TxSettings.h

@@ -0,0 +1,96 @@
+#pragma once
+
+#include <xrpl/basics/base_uint.h>
+#include <xrpl/basics/safe_cast.h>
+
+#include <cstdint>
+#include <type_traits>
+
+namespace xrpl {
+
+enum class Delegation { Delegable, NotDelegable };
+
+/**
+ * Operations a transaction is permitted to perform, as a bitfield.
+ *
+ * These are declared per-transaction in transactions.macro (via
+ * TxSettings::privileges) and enforced in InvariantCheck.cpp.
+ */
+enum class Privilege : std::uint16_t {
+    NoPriv = 0x0000,              // The transaction can not do any of the enumerated operations
+    CreateAcct = 0x0001,          // The transaction can create a new ACCOUNT_ROOT object.
+    CreatePseudoAcct = 0x0002,    // The transaction can create a pseudo account,
+                                  // which implies createAcct
+    MustDeleteAcct = 0x0004,      // The transaction must delete an ACCOUNT_ROOT object
+    MayDeleteAcct = 0x0008,       // The transaction may delete an ACCOUNT_ROOT
+                                  // object, but does not have to
+    OverrideFreeze = 0x0010,      // The transaction can override some freeze rules
+    ChangeNftCounts = 0x0020,     // The transaction can mint or burn an NFT
+    CreateMptIssuance = 0x0040,   // The transaction can create a new MPT issuance
+    DestroyMptIssuance = 0x0080,  // The transaction can destroy an MPT issuance
+    MustAuthorizeMpt = 0x0100,    // The transaction MUST create or delete an MPT
+                                  // object (except by issuer)
+    MayAuthorizeMpt = 0x0200,     // The transaction MAY create or delete an MPT
+                                  // object (except by issuer)
+    MayDeleteMpt = 0x0400,        // The transaction MAY delete an MPT object. May not create.
+    MustModifyVault = 0x0800,     // The transaction must modify, delete or create, a vault
+    MayModifyVault = 0x1000,      // The transaction MAY modify, delete or create, a vault
+    MayCreateMpt = 0x2000,        // The transaction MAY create an MPT object, except for issuer.
+};
+
+// The inner static_cast is not redundant: the underlying type is narrower than
+// `int`, so the operands integer-promote and the result has to be narrowed back.
+// safeCast rejects that narrowing, but every input bit is a Privilege bit by
+// construction, so the result is always representable.
+constexpr Privilege
+operator|(Privilege lhs, Privilege rhs)
+{
+    using Underlying = std::underlying_type_t<Privilege>;
+    return static_cast<Privilege>(
+        static_cast<Underlying>(safeCast<Underlying>(lhs) | safeCast<Underlying>(rhs)));
+}
+
+constexpr Privilege
+operator&(Privilege lhs, Privilege rhs)
+{
+    using Underlying = std::underlying_type_t<Privilege>;
+    return static_cast<Privilege>(
+        static_cast<Underlying>(safeCast<Underlying>(lhs) & safeCast<Underlying>(rhs)));
+}
+
+/**
+ * Per-transaction metadata declared in transactions.macro.
+ *
+ * Every member has a default, so a transaction only needs to name the settings
+ * that differ from the common case. See the documentation at the top of
+ * transactions.macro for the authoring syntax.
+ *
+ * This is deliberately not a constexpr-friendly type: amendment identifiers are
+ * runtime-initialized `extern uint256 const` globals (see Feature.h), so a
+ * TxSettings can only be built at runtime.
+ */
+struct TxSettings
+{
+    /**
+     * Whether an account may delegate this transaction to another account.
+     */
+    Delegation delegable{Delegation::NotDelegable};
+
+    /**
+     * The amendment gating this transaction, or uint256{} if always available.
+     */
+    // The `{}` looks redundant, because BaseUInt's default constructor already
+    // zeroes the value. It is not: without a default member initializer here,
+    // every partial designated initializer in transactions.macro trips the
+    // missing-designated-field-initializers warning, which the build treats as
+    // an error.
+    // NOLINTNEXTLINE(readability-redundant-member-init)
+    uint256 amendment{};
+
+    /**
+     * Operations this transaction is permitted to perform.
+     */
+    Privilege privileges{Privilege::NoPriv};
+};
+
+}  // namespace xrpl

include/xrpl/protocol_autogen/transactions/AMMBid.h

@@ -21,7 +21,7 @@ class AMMBidBuilder;
  * Type: ttAMM_BID (39)
  * Delegable: Delegation::Delegable
  * Amendment: featureAMM
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use AMMBidBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/AMMClawback.h

@@ -21,7 +21,7 @@ class AMMClawbackBuilder;
  * Type: ttAMM_CLAWBACK (31)
  * Delegable: Delegation::Delegable
  * Amendment: featureAMMClawback
- * Privileges: MayDeleteAcct | OverrideFreeze | MayAuthorizeMpt
+ * Privileges: Privilege::MayDeleteAcct | Privilege::OverrideFreeze | Privilege::MayAuthorizeMpt
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use AMMClawbackBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/AMMCreate.h

@@ -21,7 +21,7 @@ class AMMCreateBuilder;
  * Type: ttAMM_CREATE (35)
  * Delegable: Delegation::Delegable
  * Amendment: featureAMM
- * Privileges: CreatePseudoAcct | MayCreateMpt
+ * Privileges: Privilege::CreatePseudoAcct | Privilege::MayCreateMpt
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use AMMCreateBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/AMMDelete.h

@@ -21,7 +21,7 @@ class AMMDeleteBuilder;
  * Type: ttAMM_DELETE (40)
  * Delegable: Delegation::Delegable
  * Amendment: featureAMM
- * Privileges: MustDeleteAcct | MayDeleteMpt
+ * Privileges: Privilege::MustDeleteAcct | Privilege::MayDeleteMpt
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use AMMDeleteBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/AMMDeposit.h

@@ -21,7 +21,7 @@ class AMMDepositBuilder;
  * Type: ttAMM_DEPOSIT (36)
  * Delegable: Delegation::Delegable
  * Amendment: featureAMM
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use AMMDepositBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/AMMVote.h

@@ -21,7 +21,7 @@ class AMMVoteBuilder;
  * Type: ttAMM_VOTE (38)
  * Delegable: Delegation::Delegable
  * Amendment: featureAMM
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use AMMVoteBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/AMMWithdraw.h

@@ -21,7 +21,7 @@ class AMMWithdrawBuilder;
  * Type: ttAMM_WITHDRAW (37)
  * Delegable: Delegation::Delegable
  * Amendment: featureAMM
- * Privileges: MayDeleteAcct | MayAuthorizeMpt
+ * Privileges: Privilege::MayDeleteAcct | Privilege::MayAuthorizeMpt
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use AMMWithdrawBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/AccountDelete.h

@@ -21,7 +21,7 @@ class AccountDeleteBuilder;
  * Type: ttACCOUNT_DELETE (21)
  * Delegable: Delegation::NotDelegable
  * Amendment: uint256{}
- * Privileges: MustDeleteAcct
+ * Privileges: Privilege::MustDeleteAcct
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use AccountDeleteBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/AccountSet.h

@@ -21,7 +21,7 @@ class AccountSetBuilder;
  * Type: ttACCOUNT_SET (3)
  * Delegable: Delegation::NotDelegable
  * Amendment: uint256{}
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use AccountSetBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/Batch.h

@@ -21,7 +21,7 @@ class BatchBuilder;
  * Type: ttBATCH (71)
  * Delegable: Delegation::NotDelegable
  * Amendment: featureBatchV1_1
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use BatchBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/CheckCancel.h

@@ -21,7 +21,7 @@ class CheckCancelBuilder;
  * Type: ttCHECK_CANCEL (18)
  * Delegable: Delegation::Delegable
  * Amendment: uint256{}
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use CheckCancelBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/CheckCash.h

@@ -21,7 +21,7 @@ class CheckCashBuilder;
  * Type: ttCHECK_CASH (17)
  * Delegable: Delegation::Delegable
  * Amendment: uint256{}
- * Privileges: MayCreateMpt
+ * Privileges: Privilege::MayCreateMpt
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use CheckCashBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/CheckCreate.h

@@ -21,7 +21,7 @@ class CheckCreateBuilder;
  * Type: ttCHECK_CREATE (16)
  * Delegable: Delegation::Delegable
  * Amendment: uint256{}
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use CheckCreateBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/Clawback.h

@@ -21,7 +21,7 @@ class ClawbackBuilder;
  * Type: ttCLAWBACK (30)
  * Delegable: Delegation::Delegable
  * Amendment: uint256{}
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use ClawbackBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/ConfidentialMPTClawback.h

@@ -21,7 +21,7 @@ class ConfidentialMPTClawbackBuilder;
  * Type: ttCONFIDENTIAL_MPT_CLAWBACK (89)
  * Delegable: Delegation::Delegable
  * Amendment: featureConfidentialTransfer
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use ConfidentialMPTClawbackBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/ConfidentialMPTConvert.h

@@ -21,7 +21,7 @@ class ConfidentialMPTConvertBuilder;
  * Type: ttCONFIDENTIAL_MPT_CONVERT (85)
  * Delegable: Delegation::NotDelegable
  * Amendment: featureConfidentialTransfer
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use ConfidentialMPTConvertBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/ConfidentialMPTConvertBack.h

@@ -21,7 +21,7 @@ class ConfidentialMPTConvertBackBuilder;
  * Type: ttCONFIDENTIAL_MPT_CONVERT_BACK (87)
  * Delegable: Delegation::Delegable
  * Amendment: featureConfidentialTransfer
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use ConfidentialMPTConvertBackBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/ConfidentialMPTMergeInbox.h

@@ -21,7 +21,7 @@ class ConfidentialMPTMergeInboxBuilder;
  * Type: ttCONFIDENTIAL_MPT_MERGE_INBOX (86)
  * Delegable: Delegation::Delegable
  * Amendment: featureConfidentialTransfer
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use ConfidentialMPTMergeInboxBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/ConfidentialMPTSend.h

@@ -21,7 +21,7 @@ class ConfidentialMPTSendBuilder;
  * Type: ttCONFIDENTIAL_MPT_SEND (88)
  * Delegable: Delegation::Delegable
  * Amendment: featureConfidentialTransfer
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use ConfidentialMPTSendBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/CredentialAccept.h

@@ -21,7 +21,7 @@ class CredentialAcceptBuilder;
  * Type: ttCREDENTIAL_ACCEPT (59)
  * Delegable: Delegation::Delegable
  * Amendment: featureCredentials
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use CredentialAcceptBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/CredentialCreate.h

@@ -21,7 +21,7 @@ class CredentialCreateBuilder;
  * Type: ttCREDENTIAL_CREATE (58)
  * Delegable: Delegation::Delegable
  * Amendment: featureCredentials
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use CredentialCreateBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/CredentialDelete.h

@@ -21,7 +21,7 @@ class CredentialDeleteBuilder;
  * Type: ttCREDENTIAL_DELETE (60)
  * Delegable: Delegation::Delegable
  * Amendment: featureCredentials
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use CredentialDeleteBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/DIDDelete.h

@@ -21,7 +21,7 @@ class DIDDeleteBuilder;
  * Type: ttDID_DELETE (50)
  * Delegable: Delegation::Delegable
  * Amendment: featureDID
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use DIDDeleteBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/DIDSet.h

@@ -21,7 +21,7 @@ class DIDSetBuilder;
  * Type: ttDID_SET (49)
  * Delegable: Delegation::Delegable
  * Amendment: featureDID
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use DIDSetBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/DelegateSet.h

@@ -21,7 +21,7 @@ class DelegateSetBuilder;
  * Type: ttDELEGATE_SET (64)
  * Delegable: Delegation::NotDelegable
  * Amendment: featurePermissionDelegationV1_1
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use DelegateSetBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/DepositPreauth.h

@@ -21,7 +21,7 @@ class DepositPreauthBuilder;
  * Type: ttDEPOSIT_PREAUTH (19)
  * Delegable: Delegation::Delegable
  * Amendment: uint256{}
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use DepositPreauthBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/EnableAmendment.h

@@ -21,7 +21,7 @@ class EnableAmendmentBuilder;
  * Type: ttAMENDMENT (100)
  * Delegable: Delegation::NotDelegable
  * Amendment: uint256{}
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use EnableAmendmentBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/EscrowCancel.h

@@ -21,7 +21,7 @@ class EscrowCancelBuilder;
  * Type: ttESCROW_CANCEL (4)
  * Delegable: Delegation::Delegable
  * Amendment: uint256{}
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use EscrowCancelBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/EscrowCreate.h

@@ -21,7 +21,7 @@ class EscrowCreateBuilder;
  * Type: ttESCROW_CREATE (1)
  * Delegable: Delegation::Delegable
  * Amendment: uint256{}
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use EscrowCreateBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/EscrowFinish.h

@@ -21,7 +21,7 @@ class EscrowFinishBuilder;
  * Type: ttESCROW_FINISH (2)
  * Delegable: Delegation::Delegable
  * Amendment: uint256{}
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use EscrowFinishBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/LedgerStateFix.h

@@ -21,7 +21,7 @@ class LedgerStateFixBuilder;
  * Type: ttLEDGER_STATE_FIX (53)
  * Delegable: Delegation::Delegable
  * Amendment: fixNFTokenPageLinks
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use LedgerStateFixBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/LoanBrokerCoverClawback.h

@@ -21,7 +21,7 @@ class LoanBrokerCoverClawbackBuilder;
  * Type: ttLOAN_BROKER_COVER_CLAWBACK (78)
  * Delegable: Delegation::NotDelegable
  * Amendment: featureLendingProtocol
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use LoanBrokerCoverClawbackBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/LoanBrokerCoverDeposit.h

@@ -21,7 +21,7 @@ class LoanBrokerCoverDepositBuilder;
  * Type: ttLOAN_BROKER_COVER_DEPOSIT (76)
  * Delegable: Delegation::NotDelegable
  * Amendment: featureLendingProtocol
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use LoanBrokerCoverDepositBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/LoanBrokerCoverWithdraw.h

@@ -21,7 +21,7 @@ class LoanBrokerCoverWithdrawBuilder;
  * Type: ttLOAN_BROKER_COVER_WITHDRAW (77)
  * Delegable: Delegation::NotDelegable
  * Amendment: featureLendingProtocol
- * Privileges: MayAuthorizeMpt
+ * Privileges: Privilege::MayAuthorizeMpt
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use LoanBrokerCoverWithdrawBuilder to construct new transactions.
@@ -121,6 +121,32 @@ public:
     {
         return this->tx_->isFieldPresent(sfDestinationTag);
     }
+
+    /**
+     * @brief Get sfCredentialIDs (SoeOptional)
+     * @return The field value, or std::nullopt if not present.
+     */
+    [[nodiscard]]
+    protocol_autogen::Optional<SF_VECTOR256::type::value_type>
+    getCredentialIDs() const
+    {
+        if (hasCredentialIDs())
+        {
+            return this->tx_->at(sfCredentialIDs);
+        }
+        return std::nullopt;
+    }
+
+    /**
+     * @brief Check if sfCredentialIDs is present.
+     * @return True if the field is present, false otherwise.
+     */
+    [[nodiscard]]
+    bool
+    hasCredentialIDs() const
+    {
+        return this->tx_->isFieldPresent(sfCredentialIDs);
+    }
 };
 
 /**
@@ -214,6 +240,17 @@ public:
         return *this;
     }
 
+    /**
+     * @brief Set sfCredentialIDs (SoeOptional)
+     * @return Reference to this builder for method chaining.
+     */
+    LoanBrokerCoverWithdrawBuilder&
+    setCredentialIDs(std::decay_t<typename SF_VECTOR256::type::value_type> const& value)
+    {
+        object_[sfCredentialIDs] = value;
+        return *this;
+    }
+
     /**
      * @brief Build and return the LoanBrokerCoverWithdraw wrapper.
      * @param publicKey The public key for signing.

include/xrpl/protocol_autogen/transactions/LoanBrokerDelete.h

@@ -21,7 +21,7 @@ class LoanBrokerDeleteBuilder;
  * Type: ttLOAN_BROKER_DELETE (75)
  * Delegable: Delegation::NotDelegable
  * Amendment: featureLendingProtocol
- * Privileges: MustDeleteAcct | MayAuthorizeMpt
+ * Privileges: Privilege::MustDeleteAcct | Privilege::MayAuthorizeMpt
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use LoanBrokerDeleteBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/LoanBrokerSet.h

@@ -21,7 +21,7 @@ class LoanBrokerSetBuilder;
  * Type: ttLOAN_BROKER_SET (74)
  * Delegable: Delegation::NotDelegable
  * Amendment: featureLendingProtocol
- * Privileges: CreatePseudoAcct | MayAuthorizeMpt
+ * Privileges: Privilege::CreatePseudoAcct | Privilege::MayAuthorizeMpt
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use LoanBrokerSetBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/LoanDelete.h

@@ -21,7 +21,7 @@ class LoanDeleteBuilder;
  * Type: ttLOAN_DELETE (81)
  * Delegable: Delegation::NotDelegable
  * Amendment: featureLendingProtocol
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use LoanDeleteBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/LoanManage.h

@@ -21,7 +21,7 @@ class LoanManageBuilder;
  * Type: ttLOAN_MANAGE (82)
  * Delegable: Delegation::NotDelegable
  * Amendment: featureLendingProtocol
- * Privileges: MayModifyVault
+ * Privileges: Privilege::MayModifyVault
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use LoanManageBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/LoanPay.h

@@ -21,7 +21,7 @@ class LoanPayBuilder;
  * Type: ttLOAN_PAY (84)
  * Delegable: Delegation::NotDelegable
  * Amendment: featureLendingProtocol
- * Privileges: MayAuthorizeMpt | MustModifyVault
+ * Privileges: Privilege::MayAuthorizeMpt | Privilege::MustModifyVault
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use LoanPayBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/LoanSet.h

@@ -21,7 +21,7 @@ class LoanSetBuilder;
  * Type: ttLOAN_SET (80)
  * Delegable: Delegation::NotDelegable
  * Amendment: featureLendingProtocol
- * Privileges: MayAuthorizeMpt | MustModifyVault
+ * Privileges: Privilege::MayAuthorizeMpt | Privilege::MustModifyVault
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use LoanSetBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/MPTokenAuthorize.h

@@ -21,7 +21,7 @@ class MPTokenAuthorizeBuilder;
  * Type: ttMPTOKEN_AUTHORIZE (57)
  * Delegable: Delegation::Delegable
  * Amendment: featureMPTokensV1
- * Privileges: MustAuthorizeMpt
+ * Privileges: Privilege::MustAuthorizeMpt
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use MPTokenAuthorizeBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/MPTokenIssuanceCreate.h

@@ -21,7 +21,7 @@ class MPTokenIssuanceCreateBuilder;
  * Type: ttMPTOKEN_ISSUANCE_CREATE (54)
  * Delegable: Delegation::Delegable
  * Amendment: featureMPTokensV1
- * Privileges: CreateMptIssuance
+ * Privileges: Privilege::CreateMptIssuance
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use MPTokenIssuanceCreateBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/MPTokenIssuanceDestroy.h

@@ -21,7 +21,7 @@ class MPTokenIssuanceDestroyBuilder;
  * Type: ttMPTOKEN_ISSUANCE_DESTROY (55)
  * Delegable: Delegation::Delegable
  * Amendment: featureMPTokensV1
- * Privileges: DestroyMptIssuance
+ * Privileges: Privilege::DestroyMptIssuance
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use MPTokenIssuanceDestroyBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/MPTokenIssuanceSet.h

@@ -21,7 +21,7 @@ class MPTokenIssuanceSetBuilder;
  * Type: ttMPTOKEN_ISSUANCE_SET (56)
  * Delegable: Delegation::Delegable
  * Amendment: featureMPTokensV1
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use MPTokenIssuanceSetBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/NFTokenAcceptOffer.h

@@ -21,7 +21,7 @@ class NFTokenAcceptOfferBuilder;
  * Type: ttNFTOKEN_ACCEPT_OFFER (29)
  * Delegable: Delegation::Delegable
  * Amendment: uint256{}
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use NFTokenAcceptOfferBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/NFTokenBurn.h

@@ -21,7 +21,7 @@ class NFTokenBurnBuilder;
  * Type: ttNFTOKEN_BURN (26)
  * Delegable: Delegation::Delegable
  * Amendment: uint256{}
- * Privileges: ChangeNftCounts
+ * Privileges: Privilege::ChangeNftCounts
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use NFTokenBurnBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/NFTokenCancelOffer.h

@@ -21,7 +21,7 @@ class NFTokenCancelOfferBuilder;
  * Type: ttNFTOKEN_CANCEL_OFFER (28)
  * Delegable: Delegation::Delegable
  * Amendment: uint256{}
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use NFTokenCancelOfferBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/NFTokenCreateOffer.h

@@ -21,7 +21,7 @@ class NFTokenCreateOfferBuilder;
  * Type: ttNFTOKEN_CREATE_OFFER (27)
  * Delegable: Delegation::Delegable
  * Amendment: uint256{}
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use NFTokenCreateOfferBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/NFTokenMint.h

@@ -21,7 +21,7 @@ class NFTokenMintBuilder;
  * Type: ttNFTOKEN_MINT (25)
  * Delegable: Delegation::Delegable
  * Amendment: uint256{}
- * Privileges: ChangeNftCounts
+ * Privileges: Privilege::ChangeNftCounts
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use NFTokenMintBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/NFTokenModify.h

@@ -21,7 +21,7 @@ class NFTokenModifyBuilder;
  * Type: ttNFTOKEN_MODIFY (61)
  * Delegable: Delegation::Delegable
  * Amendment: featureDynamicNFT
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use NFTokenModifyBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/OfferCancel.h

@@ -21,7 +21,7 @@ class OfferCancelBuilder;
  * Type: ttOFFER_CANCEL (8)
  * Delegable: Delegation::Delegable
  * Amendment: uint256{}
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use OfferCancelBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/OfferCreate.h

@@ -21,7 +21,7 @@ class OfferCreateBuilder;
  * Type: ttOFFER_CREATE (7)
  * Delegable: Delegation::Delegable
  * Amendment: uint256{}
- * Privileges: MayCreateMpt
+ * Privileges: Privilege::MayCreateMpt
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use OfferCreateBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/OracleDelete.h

@@ -21,7 +21,7 @@ class OracleDeleteBuilder;
  * Type: ttORACLE_DELETE (52)
  * Delegable: Delegation::Delegable
  * Amendment: featurePriceOracle
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use OracleDeleteBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/OracleSet.h

@@ -21,7 +21,7 @@ class OracleSetBuilder;
  * Type: ttORACLE_SET (51)
  * Delegable: Delegation::Delegable
  * Amendment: featurePriceOracle
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use OracleSetBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/Payment.h

@@ -21,7 +21,7 @@ class PaymentBuilder;
  * Type: ttPAYMENT (0)
  * Delegable: Delegation::Delegable
  * Amendment: uint256{}
- * Privileges: CreateAcct | MayCreateMpt
+ * Privileges: Privilege::CreateAcct | Privilege::MayCreateMpt
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use PaymentBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/PaymentChannelClaim.h

@@ -21,7 +21,7 @@ class PaymentChannelClaimBuilder;
  * Type: ttPAYCHAN_CLAIM (15)
  * Delegable: Delegation::Delegable
  * Amendment: uint256{}
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use PaymentChannelClaimBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/PaymentChannelCreate.h

@@ -21,7 +21,7 @@ class PaymentChannelCreateBuilder;
  * Type: ttPAYCHAN_CREATE (13)
  * Delegable: Delegation::Delegable
  * Amendment: uint256{}
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use PaymentChannelCreateBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/PaymentChannelFund.h

@@ -21,7 +21,7 @@ class PaymentChannelFundBuilder;
  * Type: ttPAYCHAN_FUND (14)
  * Delegable: Delegation::Delegable
  * Amendment: uint256{}
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use PaymentChannelFundBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/PermissionedDomainDelete.h

@@ -21,7 +21,7 @@ class PermissionedDomainDeleteBuilder;
  * Type: ttPERMISSIONED_DOMAIN_DELETE (63)
  * Delegable: Delegation::Delegable
  * Amendment: featurePermissionedDomains
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use PermissionedDomainDeleteBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/PermissionedDomainSet.h

@@ -21,7 +21,7 @@ class PermissionedDomainSetBuilder;
  * Type: ttPERMISSIONED_DOMAIN_SET (62)
  * Delegable: Delegation::Delegable
  * Amendment: featurePermissionedDomains
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use PermissionedDomainSetBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/SetFee.h

@@ -21,7 +21,7 @@ class SetFeeBuilder;
  * Type: ttFEE (101)
  * Delegable: Delegation::NotDelegable
  * Amendment: uint256{}
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use SetFeeBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/SetRegularKey.h

@@ -21,7 +21,7 @@ class SetRegularKeyBuilder;
  * Type: ttREGULAR_KEY_SET (5)
  * Delegable: Delegation::NotDelegable
  * Amendment: uint256{}
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use SetRegularKeyBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/SignerListSet.h

@@ -21,7 +21,7 @@ class SignerListSetBuilder;
  * Type: ttSIGNER_LIST_SET (12)
  * Delegable: Delegation::NotDelegable
  * Amendment: uint256{}
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use SignerListSetBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/SponsorshipSet.h

@@ -21,7 +21,7 @@ class SponsorshipSetBuilder;
  * Type: ttSPONSORSHIP_SET (91)
  * Delegable: Delegation::Delegable
  * Amendment: featureSponsor
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use SponsorshipSetBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/SponsorshipTransfer.h

@@ -21,7 +21,7 @@ class SponsorshipTransferBuilder;
  * Type: ttSPONSORSHIP_TRANSFER (90)
  * Delegable: Delegation::NotDelegable
  * Amendment: featureSponsor
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use SponsorshipTransferBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/TicketCreate.h

@@ -21,7 +21,7 @@ class TicketCreateBuilder;
  * Type: ttTICKET_CREATE (10)
  * Delegable: Delegation::Delegable
  * Amendment: uint256{}
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use TicketCreateBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/TrustSet.h

@@ -21,7 +21,7 @@ class TrustSetBuilder;
  * Type: ttTRUST_SET (20)
  * Delegable: Delegation::Delegable
  * Amendment: uint256{}
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use TrustSetBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/UNLModify.h

@@ -21,7 +21,7 @@ class UNLModifyBuilder;
  * Type: ttUNL_MODIFY (102)
  * Delegable: Delegation::NotDelegable
  * Amendment: uint256{}
- * Privileges: NoPriv
+ * Privileges: Privilege::NoPriv
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use UNLModifyBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/VaultClawback.h

@@ -21,7 +21,7 @@ class VaultClawbackBuilder;
  * Type: ttVAULT_CLAWBACK (70)
  * Delegable: Delegation::NotDelegable
  * Amendment: featureSingleAssetVault
- * Privileges: MayDeleteMpt | MustModifyVault
+ * Privileges: Privilege::MayDeleteMpt | Privilege::MustModifyVault
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use VaultClawbackBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/VaultCreate.h

@@ -21,7 +21,7 @@ class VaultCreateBuilder;
  * Type: ttVAULT_CREATE (65)
  * Delegable: Delegation::NotDelegable
  * Amendment: featureSingleAssetVault
- * Privileges: CreatePseudoAcct | CreateMptIssuance | MustModifyVault
+ * Privileges: Privilege::CreatePseudoAcct | Privilege::CreateMptIssuance | Privilege::MustModifyVault
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use VaultCreateBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/VaultDelete.h

@@ -21,7 +21,7 @@ class VaultDeleteBuilder;
  * Type: ttVAULT_DELETE (67)
  * Delegable: Delegation::NotDelegable
  * Amendment: featureSingleAssetVault
- * Privileges: MustDeleteAcct | DestroyMptIssuance | MustModifyVault
+ * Privileges: Privilege::MustDeleteAcct | Privilege::DestroyMptIssuance | Privilege::MustModifyVault
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use VaultDeleteBuilder to construct new transactions.

include/xrpl/protocol_autogen/transactions/VaultDeposit.h

@@ -21,7 +21,7 @@ class VaultDepositBuilder;
  * Type: ttVAULT_DEPOSIT (68)
  * Delegable: Delegation::NotDelegable
  * Amendment: featureSingleAssetVault
- * Privileges: MayAuthorizeMpt | MustModifyVault
+ * Privileges: Privilege::MayAuthorizeMpt | Privilege::MustModifyVault
  *
  * Immutable wrapper around STTx providing type-safe field access.
  * Use VaultDepositBuilder to construct new transactions.