Apply a minor cleanup in `TypedField`:
* Remove a non-working and unused move constructor.
* Constrain the remaining constructor to not be overly generic enough as
to be used as a copy or move constructor.
There is now an Artifactory (thanks @shichengripple001 and team!) to
hold dependency binaries for the builds.
* Rewrite the `nix` workflow to use it and cut the time down to a mere
21 minutes.
* This workflow should continue to work (just more slowly) for forks
that do not have access to the Artifactory.
Enhance the /crawl endpoint by publishing WebSocket/RPC ports in the
server_info response. The function processing requests to the /crawl
endpoint actually calls server_info internally, so this change enables a
server to advertise its WebSocket/RPC port(s) to peers via the /crawl
endpoint. `grpc` and `peer` ports are included as well.
The new `ports` array contains objects, each containing a `port` for the
listening port (number string), and an array `protocol` listing the
supported protocol(s).
This allows crawlers to build a richer topology without needing to
port-scan nodes. For non-admin users (including peers), the info about
*admin* ports is excluded.
Also increase test coverage for RPC ServerInfo.
Fix#2837.
Curtail the occurrence of order books that are blocked by reduced offers
with the implementation of the fixReducedOffersV1 amendment.
This commit identifies three ways in which offers can be reduced:
1. A new offer can be partially crossed by existing offers, so the new
offer is reduced when placed in the ledger.
2. An in-ledger offer can be partially crossed by a new offer in a
transaction. So the in-ledger offer is reduced by the new offer.
3. An in-ledger offer may be under-funded. In this case the in-ledger
offer is scaled down to match the available funds.
Reduced offers can block order books if the effective quality of the
reduced offer is worse than the quality of the original offer (from the
perspective of the taker). It turns out that, for small values, the
quality of the reduced offer can be significantly affected by the
rounding mode used during scaling computations.
This commit adjusts some rounding modes so that the quality of a reduced
offer is always at least as good (from the taker's perspective) as the
original offer.
The amendment is titled fixReducedOffersV1 because additional ways of
producing reduced offers may come to light. Therefore, there may be a
future need for a V2 amendment.
* Enable api_version 2, which is currently in beta. It is expected to be
marked stable by the next stable release.
* This does not change any defaults.
* The only existing tests changed were one that set the same flag, which
was now redundant, and a couple that tested versioning explicitly.
- Resolve gcc compiler warning:
AccountObjects.cpp:182:47: warning: redundant move in initialization [-Wredundant-move]
- The std::move() operation on trivially copyable types may generate a
compile warning in newer versions of gcc.
- Remove extraneous header (unused imports) from a unit test file.
Fix a bug in the `NODE_SIZE` auto-detection feature in `Config.cpp`.
Specifically, this patch corrects the calculation for the total amount
of RAM available, which was previously returned in bytes, but is now
being returned in units of the system's memory unit. Additionally, the
patch adjusts the node size based on the number of available hardware
threads of execution.
Misaligned load and store operations are supported by both Intel and ARM
CPUs. However, in C++, these operations are undefined behavior (UB).
Substituting these operations with a `memcpy` fixes this UB. The
compiled assembly code is equivalent to the original, so there is no
performance penalty to using memcpy.
For context: The unaligned load and store operations fixed here were
originally introduced in the slab allocator (#4218).
This assert was put in the wrong place, but it only triggers if shards
are configured. This change moves the assert to the right place and
updates it to ensure correctness.
The assert could be hit after the server downloads some shards. It may
be necessary to restart after the shards are downloaded.
Note that asserts are normally checked only in debug builds, so release
packages should not be affected.
Introduced in: #4319 (66627b26cf)
Global variables in different TUs are initialized in an undefined order.
At least one global variable was accessing a global switchover variable.
This caused the switchover variable to be accessed in an uninitialized
state.
Since the switchover is always explicitly set before transaction
processing, this bug can not effect transaction processing, but could
effect unit tests (and potentially the value of some global variables).
Note: at the time of this patch the offending bug is not yet in
production.
Three new fields are added to the `Tx` responses for NFTs:
1. `nftoken_id`: This field is included in the `Tx` responses for
`NFTokenMint` and `NFTokenAcceptOffer`. This field indicates the
`NFTokenID` for the `NFToken` that was modified on the ledger by the
transaction.
2. `nftoken_ids`: This array is included in the `Tx` response for
`NFTokenCancelOffer`. This field provides a list of all the
`NFTokenID`s for the `NFToken`s that were modified on the ledger by
the transaction.
3. `offer_id`: This field is included in the `Tx` response for
`NFTokenCreateOffer` transactions and shows the OfferID of the
`NFTokenOffer` created.
The fields make it easier to track specific tokens and offers. The
implementation includes code (by @ledhed2222) from the Clio project to
extract NFTokenIDs from mint transactions.
The API would allow seeds (and public keys) to be used in place of
accounts at several locations in the API. For example, when calling
account_info, you could pass `"account": "foo"`. The string "foo" is
treated like a seed, so the method returns `actNotFound` (instead of
`actMalformed`, as most developers would expect). In the early days,
this was a convenience to make testing easier. However, it allows for
poor security practices, so it is no longer a good idea. Allowing a
secret or passphrase is now considered a bug. Previously, it was
controlled by the `strict` option on some methods. With this commit,
since the API does not interpret `account` as `seed`, the option
`strict` is no longer needed and is removed.
Removing this behavior from the API is a [breaking
change](https://xrpl.org/request-formatting.html#breaking-changes). One
could argue that it shouldn't be done without bumping the API version;
however, in this instance, there is no evidence that anyone is using the
API in the "legacy" way. Furthermore, it is a potential security hole,
as it allows users to send secrets to places where they are not needed,
where they could end up in logs, error messages, etc. There's no reason
to take such a risk with a seed/secret, since only the public address is
needed.
Resolves: #3329, #3330, #4337
BREAKING CHANGE: Remove non-strict account parsing (#3330)
On macOS, if you have not installed something that depends on `xz`, then your
system may lack `lzma`, resulting in a build error similar to:
```
Downloading libarchive-3.6.0.tar.xz completed [6250.61k]
libarchive/3.6.0:
ERROR: libarchive/3.6.0: Error in source() method, line 120
get(self, **self.conan_data["sources"][self.version], strip_root=True)
ReadError: file could not be opened successfully:
- method gz: ReadError('not a gzip file')
- method bz2: ReadError('not a bzip2 file')
- method xz: CompressionError('lzma module is not available')
- method tar: ReadError('invalid header')
```
The solution is to ensure that `lzma` is installed by installing `xz`.
SOCI is the C++ database access library. The SOCI recipe was updated in
Conan Center Index (CCI), and it breaks for our choice of options. This
breakage occurs when you build with a fresh Conan cache (e.g. when you
submit a PR, or delete `~/.conan/data`).
* Add a custom Conan recipe for SOCI v4.0.3
* Update dependency building to handle exporting and installing Snappy
and SOCI
* Fix workflows to use custom SOCI recipe
* Update BUILD.md to include instruction for exporting the SOCI Conan
recipe:
* `conan export external/soci soci/4.0.3@`
This solution has been verified on Ubuntu 20.04 and macOS.
Context:
* There is a compiler error that the `sqlite3.h` header is not available
when building soci.
* When package B depends on package A, it finds the pieces it needs by
importing the Package Configuration File (PCF) that Conan generates
for package A.
* Read the CMake written by package B to check that it is importing
the PCF correctly and linking its exports correctly.
* Since this can be difficult, it is often more efficient to check
https://github.com/conan-io/conan-center-index/issues for package B
to see if anyone else has seen a similar problem.
* One of the issues points to a problem area in soci's CMake. To
confirm the diagnosis, review soci's CMake (after any patches are
applied) in the Conan build directory `build/$buildId/src/`.
* Review the Conan-generated PCF in
`build/$buildId/build/$buildType/generators/`.
* In this case, the problem was likely (re)introduced by
https://github.com/conan-io/conan-center-index/pull/17026
* If there is a problem in the source or in the Conan recipe, the
fastest fix is to copy the recipe and either:
* Add a source patch to fix any problems in the source.
* Change the recipe to fix any problems in the recipe.
* In this case, this can be done by finding soci's Conan recipe at
https://github.com/conan-io/conan-center-index/tree/master/recipes/soci
and then copying the `all` directory as `external/$packageName` in our
project. Then, make any changes.
* Test packages can be removed from the recipe folder as they are not
needed.
* If adding a patch in the `patches` directory, add a description for
it to `conandata.yml`.
* Since `conanfile.py` has no `version` property on the recipe class,
builders need to pass a version on the command line (like they do
for our `snappy` recipe).
* Add an example command to `BUILD.md`.
Future work: It may make sense to refer to recipes by revision, by
checking in a lockfile.
This change makes progress on the plan in #4371. It does not replicate
the full [matrix] implemented in #3851, but it does replicate the 1.ii
section of the Linux matrix. It leverages "heavy" self-hosted runners,
and demonstrates a repeatable pattern for future matrices.
[matrix]: d794a0f3f1/.github/README.md (continuous-integration)
Address issues related to the removal of `std::{u,bi}nary_function` in
C++17 and some warnings with Clang 16. Some warnings appeared with the
upgrade to Apple clang version 14.0.3 (clang-1403.0.22.14.1).
- `std::{u,bi}nary_function` were removed in C++17. They were empty
classes with a few associated types. We already have conditional code
to define the types. Just make it unconditional.
- libc++ checks a cast in an unevaluated context to see if a type
inherits from a binary function class in the standard library, e.g.
`std::equal_to`, and this causes an error when the type privately
inherits from such a class. Change these instances to public
inheritance.
- We don't need a middle-man for the empty base optimization. Prefer to
inherit directly from an empty class than from
`beast::detail::empty_base_optimization`.
- Clang warns when all the uses of a variable are removed by conditional
compilation of assertions. Add a `[[maybe_unused]]` annotation to
suppress it.
- As a drive-by clean-up, remove commented code.
See related work in #4486.
If `--quorum` setting is present on the command line, use the specified
value as the minimum quorum. This allows for the use of a potentially
fork-unsafe quorum, but it is sometimes necessary for small and test
networks.
Fix#4488.
---------
Co-authored-by: RichardAH <richard.holland@starstone.co.nz>
Add instructions for installing rippled using the package managers APT
and YUM. Some steps were adapted from xrpl.org.
---------
Co-authored-by: Michael Legleux <mlegleux@ripple.com>
Newer compilers, such as Apple Clang 15.0, have removed `std::result_of`
as part of C++20. The build instructions provided a fix for this (by
adding a preprocessor definition), but the fix was broken.
This fixes the fix by:
* Adding the `conf` prefix for tool configurations (which had been
forgotten).
* Passing `extra_b2_flags` to `boost` package to fix its build.
* Define `BOOST_ASIO_HAS_STD_INVOKE_RESULT` in order to build boost
1.77 with a newer compiler.
Add a `NetworkID` field to help prevent replay attacks on and from
side-chains.
The new field must be used when the server is using a network id > 1024.
To preserve legacy behavior, all chains with a network ID less than 1025
retain the existing behavior. This includes Mainnet, Testnet, Devnet,
and hooks-testnet. If `sfNetworkID` is present in any transaction
submitted to any of the nodes on one of these chains, then
`telNETWORK_ID_MAKES_TX_NON_CANONICAL` is returned.
Since chains with a network ID less than 1025, including Mainnet, retain
the existing behavior, there is no need for an amendment.
The `NetworkID` helps to prevent replay attacks because users specify a
`NetworkID` field in every transaction for that chain.
This change introduces a new UINT32 field, `sfNetworkID` ("NetworkID").
There are also three new local error codes for transaction results:
- `telNETWORK_ID_MAKES_TX_NON_CANONICAL`
- `telREQUIRES_NETWORK_ID`
- `telWRONG_NETWORK`
To learn about the other transaction result codes, see:
https://xrpl.org/transaction-results.html
Local error codes were chosen because a transaction is not necessarily
malformed if it is submitted to a node running on the incorrect chain.
This is a local error specific to that node and could be corrected by
switching to a different node or by changing the `network_id` on that
node. See:
https://xrpl.org/connect-your-rippled-to-the-xrp-test-net.html
In addition to using `NetworkID`, it is still generally recommended to
use different accounts and keys on side-chains. However, people will
undoubtedly use the same keys on multiple chains; for example, this is
common practice on other blockchain networks. There are also some
legitimate use cases for this.
A `app.NetworkID` test suite has been added, and `core.Config` was
updated to include some network_id tests.
The `Ledger` class contains two `SHAMap` instances: the state and
transaction maps. Previously, the maps were dynamically allocated using
`std::make_shared` despite the fact that they did not require lifetime
management separate from the lifetime of the `Ledger` instance to which
they belong.
The two `SHAMap` instances are now regular member variables. Some smart
pointers and dynamic memory allocation was avoided by using stack-based
alternatives.
Commit 3 of 3 in #4218.
The `SHAMapItem` class contains a variable-sized buffer that
holds the serialized data associated with a particular item
inside a `SHAMap`.
Prior to this commit, the buffer for the serialized data was
allocated separately. Coupled with the fact that most instances
of `SHAMapItem` were wrapped around a `std::shared_ptr` meant
that an instantiation might result in up to three separate
memory allocations.
This commit switches away from `std::shared_ptr` for `SHAMapItem`
and uses `boost::intrusive_ptr` instead, allowing the reference
count for an instance to live inside the instance itself. Coupled
with using a slab-based allocator to optimize memory allocation
for the most commonly sized buffers, the net result is significant
memory savings. In testing, the reduction in memory usage hovers
between 400MB and 650MB. Other scenarios might result in larger
savings.
In performance testing with NFTs, this commit reduces memory size by
about 15% sustained over long duration.
Commit 2 of 3 in #4218.
When instantiating a large amount of fixed-sized objects on the heap
the overhead that dynamic memory allocation APIs impose will quickly
become significant.
In some cases, allocating a large amount of memory at once and using
a slabbing allocator to carve the large block into fixed-sized units
that are used to service requests for memory out will help to reduce
memory fragmentation significantly and, potentially, improve overall
performance.
This commit introduces a new `SlabAllocator<>` class that exposes an
API that is _similar_ to the C++ concept of an `Allocator` but it is
not meant to be a general-purpose allocator.
It should not be used unless profiling and analysis of specific memory
allocation patterns indicates that the additional complexity introduced
will improve the performance of the system overall, and subsequent
profiling proves it.
A helper class, `SlabAllocatorSet<>` simplifies handling of variably
sized objects that benefit from slab allocations.
This commit incorporates improvements suggested by Greg Popovitch
(@greg7mdp).
Commit 1 of 3 in #4218.
Add Clio-specific JSS constants to ensure a common vocabulary of
keywords in Clio and this project. By providing visibility of the full
API keyword namespace, it reduces the likelihood of developers
introducing minor variations on names used by Clio, or unknowingly
claiming a keyword that Clio has already claimed. This change moves this
project slightly away from having only the code necessary for running
the core server, but it is a step toward the goal of keeping this
server's and Clio's APIs similar. The added JSS constants are annotated
to indicate their relevance to Clio.
Clio can be found here: https://github.com/XRPLF/clio
Signed-off-by: ledhed2222 <ledhed2222@users.noreply.github.com>
- Include NFTokenPages in account_objects to make it easier to
understand an account's Owner Reserve and simplify app development.
- Update related tests and documentation.
- Fix#4347.
For info about the Owner Reserve, see https://xrpl.org/reserves.html
---------
Co-authored-by: Scott Schurr <scott@ripple.com>
Co-authored-by: Ed Hennis <ed@ripple.com>
Change `ledger_data` to return an empty list when all entries are
filtered out.
When the `type` field is specified for the `ledger_data` method, it is
possible that no objects of the specified type are found. This can even
occur if those objects exist, but not in the section that the server
checked while serving your request. Previously, the `state` field of the
response has the value `null`, instead of an empty array `[]`. By
changing this to an empty array, the response is the same data type so
that clients can handle it consistently.
For example, in Python, `for entry in state` should now work correctly.
It would raise an exception if `state` is `null` (or `None`).
This could break client code that explicitly checks for null. However,
this fix aligns the response with the documentation, where the `state`
field is an array.
Fix#4392.
Previously, the object `account_data` in the `account_info` response
contained a single field `Flags` that contains flags of an account. API
consumers must perform bitwise operations on this field to retrieve the
account flags.
This change adds a new object, `account_flags`, at the top level of the
`account_info` response `result`. The object contains relevant flags of
the account. This makes it easier to write simple code to check a flag's
value.
The flags included may depend on the amendments that are enabled.
Fix#2457.
Log exception messages at several locations.
Previously, these were locations where an exception was caught, but the
exception message was not logged. Logging the exception messages can be
useful for analysis or debugging. The additional logging could have a
small negative performance impact.
Fix#3213.
In the release notes (current and historical), there is a link to the
`Builds` directory. By creating `Builds/README.md` with a link to
`BUILD.md`, it is easier to find the build instructions.
* Create the FeeSettings object in genesis ledger.
* Initialize with default values from the config. Removes the need to
pass a Config down into the Ledger initialization functions, including
setup().
* Drop the undocumented fee config settings in favor of the [voting]
section.
* Fix#3734.
* If you previously used fee_account_reserve and/or fee_owner_reserve,
you should change to using the [voting] section instead. Example:
```
[voting]
account_reserve=10000000
owner_reserve=2000000
```
* Because old Mainnet ledgers (prior to 562177 - yes, I looked it up)
don't have FeeSettings, some of the other ctors will default them to
the config values before setup() tries to load the object.
* Update default Config fee values to match Mainnet.
* Fix unit tests:
* Updated fees: Some tests are converted to use computed values of fee
object, but the default Env config was also updated to fix the rest.
* Unit tests that check the structure of the ledger have updated
hashes and counts.
Add the ability to mark amendments as obsolete. There are some known
amendments that should not be voted for because they are broken (or
similar reasons).
This commit marks four amendments as obsolete:
1. `CryptoConditionsSuite`
2. `NonFungibleTokensV1`
3. `fixNFTokenDirV1`
4. `fixNFTokenNegOffer`
When an amendment is `Obsolete`, voting for the amendment is prevented.
A determined operator can still vote for the amendment by changing the
source, and doing so does not break any protocol rules.
The "feature" command now does not modify the vote for obsolete
amendments.
Before this change, there were two options for an amendment's
`DefaultVote` behavior: yes and no.
After this change, there are three options for an amendment's
`VoteBehavior`: DefaultYes, DefaultNo, and Obsolete.
To be clear, if an obsolete amendment were to (somehow) be activated by
consensus, the server still has the code to process transactions
according to that amendment, and would not be amendment blocked. It
would function the same as if it had been voting "no" on the amendment.
Resolves#4014.
Incorporates review feedback from @scottschurr.
Fix a case where `ripple::Expected` returned a json array, not a value.
The problem was that `Expected` invoked the wrong constructor for the
expected type, which resulted in a constructor that took multiple
arguments being interpreted as an array.
A proposed fix was provided by @godexsoft, which involved a minor
adjustment to three constructors that replaces the use of curly braces
with parentheses. This makes `Expected` usable for
[Clio](https://github.com/XRPLF/clio).
A unit test is also included to ensure that the issue doesn't occur
again in the future.
Make it easy for projects to depend on libxrpl by adding an `ALIAS`
target named `xrpl::libxrpl` for projects to link.
The name was chosen because:
* The current library target is named `xrpl_core`. There is no other
"non-core" library target against which we need to distinguish the
"core" library. We only export one library target, and it should just
be named after the project to keep things simple and predictable.
* Underscores in target or library names are generally discouraged.
* Every target exported in CMake should be prefixed with the project
name.
By adding an `ALIAS` target, existing consumers who use the `xrpl_core`
target will not be affected.
* In the future, there can be a migration plan to make `xrpl_core` the
`ALIAS` target (and `libxrpl` the "real" target, which will affect the
filename of the compiled binary), and eventually remove it entirely.
Also:
* Fix the Conan recipe so that consumers using Conan import a target
named `xrpl::libxrpl`. This way, every consumer can use the same
instructions.
* Document the two easiest methods to depend on libxrpl. Both have been
tested.
* See #4443.
* Remove obsolete build instructions.
* By using Conan, builders can choose which dependencies specifically to
build and link as shared objects.
* Refactor the build instructions based on the plan in #4433.
