Conflict in docker/telemetry/docker-compose.yml, on the collector service's
command key. This branch layers a second --config for file_log offset
persistence; upstream added a comment above the ports block explaining the
loopback binding.
Kept both. The two changes are unrelated: one is the command list, the other is
a comment. The layered --config and all nine loopback-bound ports are present,
and the file still parses.
Conflict in docker/telemetry/docker-compose.yml, in the collector's ports
block. Upstream bound every port to the host loopback, including the StatsD
UDP port. This branch had already retired that port, because beast::insight
moved to native OTLP, leaving it commented out as a fallback example.
Not resolved as a union, which would have resurrected the retired port.
Composed instead: this branch's shape is kept, so StatsD stays commented, and
the loopback binding is applied to the active ports and to the commented
example, so uncommenting it yields the safe form.
Conflict in docker/telemetry/docker-compose.yml, in the collector's ports
block. Both sides bound ports to the host loopback: upstream did 4317, 4318
and 13133, this branch did 8125, 8889 and 9090.
Resolved as the union. All eight published ports are loopback-bound, and both
explanatory comments are kept: upstream's, which covers the whole block and
cites the upstream guidance, and this branch's, which is specific to the
unauthenticated StatsD receiver.
Grafana reaches Loki as loki:3100 over the compose network and the collector
exports to it in-network, so the published port was reachable off-host for no
consumer.
The StatsD port beside them was already loopback-bound with a comment saying
why; the Prometheus exporter and Prometheus itself were not. Prometheus
scrapes the collector as otel-collector:8889 over the compose network, so the
published port had no consumer.
The compose ports published on every host interface, so the collector's
unauthenticated OTLP receivers, Tempo, and the anonymous-admin Grafana were
reachable by anything that could route to the host.
Nothing consumed the published ports from off-host: containers address each
other by compose service name, and every doc and script uses localhost.
Grafana reaches the image renderer over the compose network at
http://renderer:8081, so the host publish gave nothing the stack needs.
AUTH_TOKEN is the only guard on the endpoint and its default is a fixed
string in this file.
Update the service table in the configuration reference to match.
Four doc conflicts, all where this branch had rewritten a passage that upstream
had only renamed. This branch's text is kept in seven of the eight hunks and
the spanmetrics -> span_metrics and otlp/tempo -> otlp_grpc/tempo spellings
carried into it, so the rewrite is not lost and the names stay current.
The exception is the TESTING.md span-call-count comment, where the incoming
side is the fuller text: it explains that the span_ prefix comes from the
connector's namespace setting. That side is taken.
Metric names are untouched — span_calls_total and traces_span_metrics_* are
produced by the connector's namespace, not by its component name.
Two conflicts, both where this branch's log-pipeline additions sat next to the
upstream spanmetrics -> span_metrics rename: the config header comment, which
this branch extended with a logs line, and the integration test, where the
log-correlation step precedes the span-metrics step. This branch's content is
kept in both and the rename carried into it.
Four conflicts, all where this branch's replacement of the StatsD path with
native OTLP met the upstream spanmetrics -> span_metrics rename. This branch's
design wins in every case; the rename is carried into its text rather than
reverting it, so the connector, its pipeline references, the header comment,
the TESTING.md summary and the runbook all use span_metrics while keeping the
native-OTLP wording.
One addition beyond a straight take-a-side: publish the collector's health
check port. This branch restored the health_check extension and its own
TESTING.md polls http://localhost:13133/ to decide the collector is ready, but
the port was never published on this side of docker-compose.yml, so that check
could not pass from the host. Verified the merged config loads with no
deprecation warnings and that 13133 is published exactly once.
No metric name changed: traces_span_metrics_* already read that way before the
rename, which only ever touched component names and prose.
The three tracker files conflicted because both sides had rewritten them. Took
the incoming lock-free class, then put this branch's two monotonic accessors
back on top of it: totalAgreementsEver() and totalMissedEver(), backed by a
gross pair incremented at first classification and left alone by the repair
branch. MetricsRegistry reads both, so dropping them would not compile.
The test file kept the incoming suite, which renames every case, and gained
this branch's two gross-counter cases adapted to the injected clock.
The pinned collector warns on every start that "spanmetrics" is a deprecated
alias for "span_metrics". Rename the connector, its pipeline references and
the prose that names it.
The derived metric names are untouched. They come from the connector's
`namespace` setting rather than its component name, so occurrences inside a
metric name such as traces_spanmetrics_calls_total are deliberately left as
they are; renaming those would break every span panel. The rename is applied
only to the bare word, never where it is joined to a metric name by
underscores.
This branch introduces the connector, so the change belongs here.
Addresses the open review findings on this branch.
The log root was never delivered at all. Docker creates a missing bind-mount
source as root, Config::getDebugLogFile() only warns when it cannot create the
network subdirectory inside it, and Application carries on. The node therefore
looked healthy while writing no debug.log, and Loki stayed empty with no error
at any layer. docker/telemetry/data/logs has in fact been root-owned in a
working checkout since it was first created. A one-shot xrpld-logdir-init
service now creates the directory and hands it to XRPLD_UID/XRPLD_GID,
following the pattern the storage-init service already uses.
Ingested logs carried no node identity, so a multi-node stack collapsed into
one indistinguishable stream while every dashboard filters on
service_instance_id. The receiver now sets include_file_path and lifts the
per-node directory onto the resource attribute service.instance.id, which is
on the allow-list Loki promotes to an indexed stream label. A record attribute
would only become structured metadata and could not be used in a selector.
For that to join anything the directory name has to equal the emitter's
service_instance_id, so the node directories are renamed to match: node$i
becomes Node-$i, and the standalone config writes to logs/xrpld-standalone.
The integration test aborted before reporting. Under set -o pipefail the
grep | head -1 pipeline is killed by SIGPIPE once the log exceeds the pipe
buffer, so the run exited 141 somewhere past a few hundred matching lines and
read as a flaky test. grep -m1 stops on its own. The test also verified the
local file and Tempo but never that a line reached Loki, which is the one hop
this branch adds, so a bounded Loki assertion is added alongside a readiness
wait.
Documentation fixes: the Tempo cross-check counted .data, but Tempo returns
OTLP shape so the array is batches and one trace can span several; the Loki
step used the instant /query endpoint, which rejects a bare log selector with
HTTP 400 and a text/plain body, so jq could never parse it and the step never
printed a number even when ingestion worked. The filelog comment claimed six
fractional digits where the node always emits nine. The two flowcharts used
<br/>, carried no legend, and advertised GetSpan(), which Log.cpp deliberately
avoids in favour of reading the thread-local context directly.
Finally, rename the deprecated collector component names: the pinned
collector warns on every start that otlphttp and filelog are aliases for
otlp_http and file_log. Alloy's otelcol.exporter.otlphttp and
otelcol.receiver.filelog are that product's own component names and are not
deprecated, so they are left alone.
Eighteen conflict regions across nine files. Resolved by asking, per
region, which side is the better final state rather than by taking a
branch wholesale.
Telemetry.cpp keeps phase-9's two resource builders. phase-8 offered a
single makeResource() with no node identity; phase-9 splits it into
makeTracerResource() and makeMetricsResource() because the metrics
provider is built in the constructor, before setNodeId() runs, so
xrpl.node.id can only be stamped unconditionally on the tracer side.
Collapsing them would have dropped that attribute, which is what keeps
per-node traces from folding into one identity.
Telemetry.h and the config test compose both sides: phase-9's nodeId
member and its assertion, plus the renamed endpoint.
xrpld-telemetry.cfg keeps phase-9's devnet identity and its
metrics_endpoint, renames the traces key, and drops exporter=otlp_http.
Nothing reads an `exporter` key on any branch in the chain: it was a real
Setup member in the first phase-1b implementation, removed when only
OTLP/HTTP was wired up, and already deleted from TESTING.md once on the
same grounds. The cfg line was the last carrier.
The docs keep phase-9's versions, which are both fuller and more
accurate: the incoming runbook listed the consensus strategy values as
"random" where the code compares against "attribute".
OTelCollector.cpp had five comment-only regions in a file phase-7 owns,
so those take the upstream side.
MetricsRegistry.h's usage example named a member that no longer exists
and the wrong arity; it now matches the real three-argument call and says
where the endpoint comes from.
Ten conflict regions in four files, none of them caused by the rename.
phase-8's own commit had rewritten comments in files phase-7 owns
(Unit.h, HistogramBuckets.h, OTelCollector.cpp) and in Telemetry.cpp,
while the same sweep ran independently on phase-7.
Resolved every region to phase-7's side on ownership grounds: those files
belong to phase-7 or earlier, so a downstream branch should not carry
divergent copies. phase-8 changed comments only in all four, verified
against the merge base, so no code was dropped.
The one structural region: phase-7 had refactored addUnitView from an
inline lambda into a member function, and phase-8 still held the lambda.
Keeping phase-8's would have shadowed the member.
Wording phase-8 had that is worth restoring on phase-7 -- the "legacy"
qualifier on the prefix parameter, and the rejected-alternative note on
the bucket ladders -- is recorded outside the tree for a follow-up.
Three conflicts, all composed rather than resolved by taking a side:
- TelemetryConfig.cpp: phase-6 kept networkTypeFromId file-local with
[[nodiscard]]; phase-7 had relocated it to public scope for
Application.cpp. Kept phase-7's relocation, so one definition remains.
The [[nodiscard]] survives on the declaration in Telemetry.h.
- Telemetry.cpp x2: phase-7 added getMeter overrides, phase-6 added
[[nodiscard]] to the startSpan below them. Kept both, and put
[[nodiscard]] on getMeter too.
- TESTING.md: phase-7 had the right metric name (span_calls_total, which
the spanmetrics namespace produces) but the wrong label. Its
xrpl.rpc.command appears nowhere else in the branch; the attribute is
bare `command`, which is what the dashboards query. Took phase-7's
metric with the correct label.
Both signalEndpoint call sites follow the renamed member. signalEndpoint
itself is left in place: removing it and adding metrics_endpoint is a
design change, not part of propagating a rename.
[telemetry] endpoint carried one OTLP signal while its name implied it
covered every signal. That asymmetry is what let the metrics URL be
guessed later by rewriting this one's path suffix, so anything not
ending /v1/traces silently posted metrics to the traces path.
Renames the key to traces_endpoint and Setup::exporterEndpoint to
tracesEndpoint. The default value is unchanged and the URL is still used
verbatim, with no path derived from it. The startup log line and the
compose-file example name the new key, the latter being where an
operator copies it from.
No metrics_endpoint is added here: this branch has no metrics pipeline,
so the key would parse into a member nothing reads.
This branch had already made the same corrections independently, and in
richer form, so the resolution keeps this branch's version nearly throughout:
- 09-data-collection-reference.md: this branch already documents the
state-accounting gauges as cumulative **microseconds** with an explanatory
callout, and already names `jobq_job_count` with its `jobq` group. Kept.
- telemetry-runbook.md: already carries `jobq_job_count` in both tables. Kept,
along with this branch's larger additions.
- OpenTelemetryPlan.md: kept this branch's rewritten section 9 blurb, which
describes the inventory without hardcoding counts and so cannot drift.
- consensus-health.json: kept this branch's rewrite. It deliberately removed
the four TraceQL close-time detail panels and renamed the agreement panel;
the incoming side would have resurrected them. Panel count unchanged at 26.
- integration-test.sh: this branch's unprefixed native metric names were kept,
but it still asserted `job_count`, so the `jobq_job_count` correction was
carried over. That check would otherwise always fail.
The file_storage extension was added to otel-collector-config.yaml, which
every stack mounts. That made the extension mandatory: the collector image
runs as 10001:10001 and ships no writable directory, so any stack without a
prepared volume would fail to start rather than merely lose offsets. The
workload-validation stack mounts this same config and has no such volume.
Offset persistence is only useful where logs outlive a restart. The workload
harness creates a fresh log directory per run, so it has nothing to resume
from. Move the extension, the receiver's storage reference and the extended
service.extensions list into otel-collector-filestorage.yaml, layered as a
second --config by the developer stack alone. The base config keeps
start_at: beginning, which is what actually fixes the reported defect, and
stays self-sufficient for every other stack.
Verified against the pinned collector image: the base config validates and
runs on its own with no volume mounted and still ingests a line written
before startup; base plus overlay validates, preserves the base receiver's
operators through the merge, and re-ingests that line zero times on a second
run against the same volume.
Conflict resolutions:
- docker/telemetry/xrpld-telemetry.cfg: relocation conflict. phase-9 had
already moved [insight] to the end of the file with server=otel, so the
incoming block was dropped rather than inserted. Keeping both would have
produced two [insight] sections, which merge last-wins into a single
effective section, silently reviving the bug this branch just fixed.
phase-9's per-branch service_instance_id=xrpld-devnet is preserved.
- OpenTelemetryPlan/06-implementation-phases.md: kept both corrections.
phase-9's "Tempo" is right (no Jaeger anywhere in the stack) and
phase-8's "active, sampled span" is right: Log.cpp:328 injects only
when spanCtx.IsValid() && spanCtx.IsSampled().
- OpenTelemetryPlan/09-data-collection-reference.md and
docs/telemetry-runbook.md: kept phase-9's structured-metadata LogQL.
The collector's filelog regex_parser already extracts partition,
severity, trace_id and span_id, so phase-8's inline regexp forms are
redundant, and a line filter matches the literal text in a message body.
Six findings from the review of #6494 survived independent verification.
Each was checked against the branch tip, and where behaviour was in
question, against a live collector and Loki rather than from the
reviewer's claim or from documentation alone.
Plan-doc section numbering. 06-implementation-phases.md used "## 6.9"
twice: for the new Phase 8 section and for the pre-existing Risk
Assessment. Three references already pointed at 6.8.1 and none at 6.9,
and the later phases are numbered 6.8.2 through 6.8.4, so Phase 8
becomes 6.8.1 and the sequence is monotonic. Renumbering to 6.10, as
suggested on the PR, would have collided with Success Metrics.
filelog read position. The receiver relied on the upstream default
start_at=end, which skips everything a node wrote before the first poll
and reads nothing at all from a log that has stopped being written to.
Read from the beginning instead, paired with a file_storage extension so
a restart resumes at the last offset rather than re-ingesting the file.
The collector image runs as 10001:10001 and ships no writable directory,
and a fresh named volume is root-owned, so a one-shot init service
prepares the volume first. It reuses an image the stack already pulls,
adding no new dependency.
Loki log stream label. The job resource attribute did not become a Loki
index label, so the documented {job="xrpld"} queries matched nothing.
Verified against grafana/loki:3.4.2 with its default config: only
service_name and deployment_environment are indexed, and job arrives as
structured metadata, which a stream selector cannot match. Dropped the
attribute and moved the twelve queries this branch introduced to
{service_name="xrpld"}. Three further occurrences in
07-observability-backends.md originate on the phase-1a branch and are
left for a commit there.
Trace ids on unsampled spans. Logs::format emitted trace_id and span_id
whenever the span context was valid. A span dropped by the
ParentBasedSampler still carries its parent's ids, so log lines
advertised traces that were never exported and the log-to-trace link
resolved to nothing. Require the sampled flag as well, and correct the
task list and the documentation that promised the fields unconditionally.
The remaining two findings were refuted. The reported risk of signing
material reaching Loki does not hold: Logs::format already scrubs seven
sensitive fields, and there is a single write path to the log file, so
every JLOG site is covered. The suggestion to add internalLink to the
Loki derived field is not applicable, because that key is not part of
Grafana's schema.
Four files conflicted.
xrpl.proto and TraceContextPropagator.h: phase-9's note is a semantic
superset of phase-8's and already carries no plan-folder pointer, so
phase-9's text is kept and nothing phase-8 said is lost.
node-health.json: the only change phase-8 makes to this file is renaming a
row that phase-9 had already deleted, so phase-9's file stands. Panel count
holds at 59 and both Validated Ledger Seq panels survive.
TESTING.md: resolved per hunk rather than by side. Phase-9's replacement of
the drifted span table and its new Grafana Cloud section are kept, and
phase-8's de-numbered "Test 3: Log-Trace Correlation" heading is taken --
keeping phase-9 wholesale would have reinstated the phase number that
phase-8 removed.
Two comment-only notes.
MetricsRegistry.cpp: record why the app and overlay includes exist and
what they cost. They are what makes loops.txt carry
xrpld.app <-> xrpld.telemetry and xrpld.overlay <-> xrpld.telemetry, where
ordering.txt previously had telemetry strictly below both. The observable
gauges are pull-model, so their callbacks need the concrete types to
sample live state. The cycle is confined to this translation unit: no
telemetry header includes app or overlay, and all of src/xrpld builds
into one target, so there is no header or link cycle. Inverting it needs
a metrics-source interface below overlay, which is left as follow-up.
Also note loops.txt is generated and must never be hand-edited.
docker-compose.yml: state the Compose >= 2.24.0 floor. The grafana
service uses the long-form env_file mapping, which older Compose cannot
parse, and it fails for the whole file rather than that one service. The
long form is required because .env.alerting is gitignored and absent in a
fresh clone, and the short form treats a missing env file as an error.
These comments and headings identified the feature by a rollout phase
number defined only in a planning folder outside the shipped tree, so the
label meant nothing to a reader of the repository.
The renderer was the only service in the stack on a floating :latest tag, so
the stack was not reproducible: a renderer release could change under a
checkout that had not been touched. Pins it to v5.12.0, matching how every
other service here is pinned.
Also wires the shared render token. Grafana 13 enables the renderAuthJWT
feature toggle by default, and the renderer rejects requests unless both sides
present the same non-default token, so pinning alone would leave rendering
broken once the Grafana bump merges forward. Both values come from the same
GF_RENDERING_RENDERER_TOKEN variable and cannot drift apart; the local default
keeps `docker compose up` working with no setup.
Verified `docker compose config` resolves and both AUTH_TOKEN and
GF_RENDERING_RENDERER_TOKEN expand to the same value.
Bumps the Loki pin this branch introduced, and updates the two docs that
name the version so they do not drift from the compose file:
- OpenTelemetryPlan/09-data-collection-reference.md (log backend section)
- OpenTelemetryPlan/Phase8_taskList.md (compose snippet)
The service runs the config bundled in the image rather than one from this
repo; `-verify-config` reports "config is valid" under 3.7.6, and native OTLP
ingestion at /otlp is unchanged across 3.4 -> 3.7.
Moves off the v2.53 LTS line, which this branch pinned, onto the current
v3 release, and corrects the accompanying comment that named the old line.
Verified against the new image rather than assumed, since this crosses a
major version:
- prometheus.yml passes `promtool check config` under v3.13.2
- all 391 unique dashboard PromQL queries parse under the v3 parser
- all 13 alert-rule expressions parse under the v3 parser
The config uses none of the surfaces v3 changed: no remote_write, no
holt_winters, no offset modifiers.
Bumps the three images this branch pins:
otel-collector-contrib 0.121.0 -> 0.158.0
tempo 2.7.2 -> 2.9.4
grafana 11.5.2 -> 13.1.2
Verified locally against the new images: the collector config passes
`validate` under 0.158.0 and tempo.yaml passes `-config.verify=true` under
2.9.4, both unchanged. The collector's log path uses the generic otlphttp
exporter (otlphttp/loki), not the dedicated loki exporter removed upstream in
v0.147.0, so the pipeline is unaffected by that removal.
Grafana crosses two majors. Operator-visible consequences are handled on the
branches that own the affected files: Grafana 13 enables the renderAuthJWT
feature toggle by default, so the image renderer now requires a matching
renderer_token on both the server and the renderer container.
The collector's log ingestion used a container path named after the old
`rippled` binary and defaulted its host mount to a location that either
needed root or diverged from where the telemetry configs actually write.
Consolidate on one accessible log root:
- container mount target renamed /var/log/rippled -> /var/log/xrpld
- filelog glob -> /var/log/xrpld/*/debug.log
- compose mount source defaults to the repo-relative ./data/logs
(user-owned, no root), overridable via XRPLD_LOG_DIR
- devnet telemetry cfg writes to data/logs/devnet/debug.log so it lands
one subdir below the mount root and matches the glob
- integration-test.sh sets XRPLD_LOG_DIR to its own workdir
- docs/runbook/task-list updated to match
The default xrpld config (cfg/xrpld-example.cfg) is intentionally left
untouched.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Correct log-timestamp examples to real Logs::format() output
(2024-Jan-15 10:30:45.123456 UTC) in docs, TESTING.md, and reference.
- Update Loki to v3.4.2 and switch the collector exporter to
otlphttp/loki on the native /otlp endpoint (docs + task list).
- Make the collector log-mount path configurable via XRPLD_LOG_DIR.
- Remove implementation-phase references from shipped config/script
comments, keeping the functional descriptions.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the placeholder webhook contact point with two env-driven tiers:
- xrpld-default (Slack) receives warning-severity alerts
- xrpld-critical (Slack + email) receives critical-severity alerts, via a
severity=critical child route in the notification policy
Secrets stay out of git: contactpoints.yaml references ${SLACK_WEBHOOK_URL},
${SLACK_CHANNEL}, and ${ALERT_EMAIL_TO}, which Grafana expands from a
gitignored .env.alerting (loaded via an optional env_file on the grafana
service). .env.alerting.example documents the variables; email additionally
needs GF_SMTP_* configured.
Fold the ALERTING.md runbook content into the Alerting section of
docs/telemetry-runbook.md (operator docs live in one place) and delete
ALERTING.md. Move the .env.* ignore rule into docker/telemetry/.gitignore.
Verified live: Grafana 11.5.2 provisioned both contact points, the
severity-routed policy, and all 6 rules with no errors.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the hardcoded /home/pratik/xrpld-logs path with the conventional
/var/log/xrpld in the mainnet config's [debug_logfile], the docker-compose
log volume mount, and the collector-config comment. Removes a personal home
directory from shipped config.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
