Three consecutive validation runs timed out at Step 3 with nodes stuck at
"unreachable", and the reason was not recoverable from the logs. The node
logs showed the failing nodes stopping at an identical point, immediately
after JobQueue initialisation and before the debug log is opened, with no
error text at all. The harness knew each node's pid and never used it, so a
crashed node was indistinguishable from a slow one.
The readiness loop now checks whether each node process is still alive and
fails as soon as one is not, instead of waiting out the remaining window and
burying the cause under two minutes of progress output. Liveness is not a
bare `kill -0`: an exited-but-unreaped child keeps its pid, so a zombie
answers `kill -0` and reads as alive for the whole window, which is exactly
how a crashed node came to look like a slow one.
On failure each stopped node reports its wait status and the tail of its
stdout. The status is the discriminator that was missing: 137 for a SIGKILL,
139 for a segfault, 134 for an abort, anything below 128 for a deliberate
exit. stdout is printed inline rather than left to the artifact upload,
because a node that dies before its debug log opens writes nothing else and
a cancelled run uploads nothing at all.
This is instrumentation, not a fix. The failure is not attributable to the
recent changes on this branch: the first red run touched only the two Python
files used at Steps 4 and 5, both of which run after this gate, and the same
harness passed 5/5 twice before that.
A validation run timed out at Step 3 with only 4 of 5 nodes proposing, and
the reason was unrecoverable afterwards. Two gaps caused that.
The node-log artifact collected `node*/debug.log` but not `node*/stdout.log`.
A node that dies before its log sink opens never writes a debug.log at all,
so stdout is the only place its reason survives — and that file is written by
the harness and read by nothing, so it went to the runner and was discarded.
The failing node's log was simply absent from the artifact.
The readiness loop also fetched each node's `server_state` and threw it away,
reporting only a count. "4/5 nodes proposing" says a node is missing but not
which one, so there is nothing to grep for even once the logs are kept. The
timeout now names each node that is not proposing along with the state it
last reported, distinguishing a node that answered with a non-proposing
state from one whose RPC port did not answer at all.
Neither change affects a healthy run: the accumulator resets each attempt and
stays empty while every node is proposing.
Two defects reported against the validation harness. Both premises were
correct, but neither suggested fix was, so the remedies differ.
Dashboard panel count: `len(dashboard["panels"])` treated Grafana row
objects as panels and skipped the panels nested inside collapsed rows, so
every dashboard was over-reported by between 1 and 10 (`log-derived-insights`
read 41 against a true 31). The check also passed unconditionally on HTTP
200, so a dashboard that renders nothing would still pass. `_leaf_panel_count`
now walks row children and the result gates the verdict. Gating on the old
top-level length, as suggested, would not have caught the case it was aimed
at: a dashboard made only of collapsed rows counts its rows and reports a
positive number while rendering nothing.
RPC latency percentiles: `LoadStats.record` appended a latency for every
outcome, including requests that never got a reply, where the value is a
time-to-failure rather than a round trip. A timeout contributed the full
receive timeout, and at the error rate a real run shows this reported p95 and
p99 of 10000 ms where the true figure was 5 ms. `record` now takes an
optional latency and the timeout path passes none. The suggestion to append
only on success was not adopted: a reply carrying `status: error` is a
completed, timely round trip whose latency is a genuine measurement, and
discarding it would throw away real data. `per_command` is now keyed off the
request counts rather than the latency map, so a command whose every request
timed out still appears in the report instead of vanishing from it, and each
entry carries a `latency_samples` count.
The rename check rewrites a bare pre-rename binary name in any processed
doc, which turned the sampler's selector description into "against xrpld
or xrpld". Describe the fallback without spelling the legacy token.
Fixes the review findings on this PR that belong to files it owns, plus
several defects found while verifying those fixes. Findings in files owned
by upstream branches are routed there and left untouched here.
Correctness:
- tx_submitter: advance the account sequence only on results that actually
consume one (tes*, tec*, terQUEUED). tem*/tef*/tel* never reach the
ledger, so advancing left a permanent gap that every later submit from
that account inherited. Add a re-fetch hatch so a repeated non-consuming
failure cannot livelock on the same sequence, and gate the account check
on funded-ness rather than list length.
- validate_telemetry: filter spans by name before collecting attributes, so
a per-span attribute contract can no longer be satisfied by a sibling
span; require exact name equality for non-wildcard children and glob
matching for wildcards; bounds-check every returned series instead of
only the first.
- collect_system_metrics: select xrpld by argv[0] rather than a substring
match on the whole command line, which averaged in unrelated processes
and reported their RSS as xrpld's. Count genuine 0.0 CPU readings, use a
clamped nearest-rank p99 index, and record RPC latency only on success.
- benchmark: return each verdict through a named variable instead of a
command substitution, so the pass/fail counters survive and the exit gate
can fire. Scale before dividing in the percentage math, which truncated a
1.26% impact to 1.00% and cleared a 1% threshold.
- compare_to_baseline: fall back to the absolute bound when the baseline is
not positive, so a 0 -> 500 ms jump is no longer "within bounds".
- rpc_load_generator: bound each connection to one in-flight recv(), drain
in-flight requests before closing, use a nearest-rank percentile, and
report delivery shortfall so an under-delivered run cannot pass with a 0%
error rate.
Fail loudly instead of silently:
- run-full-validation: treat a consensus timeout and a missing validated
ledger as fatal infrastructure errors, and fold the orchestrator and
benchmark exit codes into the final status. A degraded cluster previously
ran a full validation pass and reported misleading downstream failures.
- collect_system_metrics: warn per empty measurement source, emit
metrics_complete, and exit non-zero instead of substituting zeros that
pass every threshold. Require GNU date with %N rather than falling back
to a per-sample python3 fork that costs more than the threshold it is
measured against.
- benchmark: distinguish "could not measure" from "exceeded thresholds",
install a cleanup trap so a failure cannot leak nodes and ports, and
report an unusable baseline as inconclusive.
- workload_orchestrator: bound subprocess communicate() and fail the exit
gate on per-phase errors.
Also pins the workload compose images to the versions the sibling stack
already uses, hash-pins the Python dependencies, restricts the validator
config template to loopback, corrects the dashboard and metric counts in
the reference docs, drops a span from the regression gate that cannot fire
under a WebSocket-only workload, and narrows the teardown pkill pattern so
it no longer matches processes that merely mention the work directory.
Verified with a full harness run against a local five-node cluster:
158 of 158 checks passed with no regressions detected.
The Telemetry Validation workflow failed with three "0 series" checks:
rpc_method_us, job_queued_us and job_running_us. All three are Histograms,
and the Prometheus exporter emits a histogram only as the
_bucket/_count/_sum triple -- the bare instrument name is never a series,
so validate_metrics() could never match it.
Evidence from the failing run (31804450127): its own metric-name dump
lists rpc_method_us_bucket/_count/_sum and no bare rpc_method_us, while
the sibling counters recorded in the same function bodies passed with 100
and 67 series. capture_timings.py, which queries job_queued_us_bucket and
job_running_us_bucket, returned real values for the acceptLedger job type
in that same run. Every one of the 10 histograms present exposes the full
triple, so all three suffixes are safe to assert.
Name them the way the exporter does, matching what the spanmetrics group
above already does for span_duration_milliseconds and what
regression-metrics.json and the job-queue dashboard already query. The
metrics stay in their asserted groups because they are genuinely
unconditional, so `not_asserted` would be wrong.
The harness manifests asserted things the code cannot produce and missed most
of what it does. Two assertions were failing every run, and the metric set
covered 16 of the ~41 emitted names.
expected_spans.json: rpc.process was required with rpc.ws_message as its
parent, but it is created only in ServerHandler::processRequest() on the HTTP
path, so a WebSocket-only workload never produces it -- it is now optional and
parented to rpc.http_request, and the rpc.process -> rpc.command.* edge is
skipped with the real reason instead of a coroutine-context-loss diagnosis that
was never the cause. Adds the missing rpc.ws_upgrade span, corrects four
parents (consensus.mode_change, pathfind.request, and update_positions/check,
which are children of consensus.establish rather than consensus.round), and
demotes conditionally-set attributes out of required_attributes so a healthy
run stops failing. Counts recomputed from the file: 41 span types, 62 unique
required attributes.
expected_metrics.json: 16 -> 52 asserted entries across the job-queue, RPC
method, reduce-relay, overflow and validation families, plus the fifteenth
dashboard uid. Metrics the harness workload cannot exercise -- erroring RPC,
ledger-mismatch, TxQ overflow, and the lazily-created getobject_* instruments
-- are listed in a not_asserted group the validator skips, rather than as
assertions that would fail on a healthy node.
The workflow's push trigger listed two globs matching nothing
(include/xrpl/basics/Telemetry*.h, src/xrpld/app/misc/Telemetry*), so no C++
telemetry change ever triggered validation. Replaced with the paths the code
actually lives in, including src/libxrpl/beast/insight/** for the insight
export path the harness depends on. The four inert workflow_dispatch inputs are
now labelled UNUSED rather than looking like working knobs.
Docs: the workload README described a StatsD dirty-flag mechanism under a
member name that does not exist, on a code path the harness never uses -- it
sets [insight] server=otel, so gauges export through an observable-gauge
callback every cycle. Adds the missing txq-burst phase, reconciles three
different dashboard counts, and drops "posts summary to PR", which the workflow
has no permission to do. The runbook's phase-10 section loses the last
sampling_ratio reference (not a config key), gains a Regression Gate and CI
subsection covering the gate that can fail CI, and its compose-logs command now
names the workload compose file. cmake --preset default is left for a separate
change: no CMakePresets.json is tracked, so it is wrong everywhere it appears.
Also drops the dead exporter=otlp_http key the harness wrote into every node
config, and stops capture_timings.py defaulting --profile to a profile that
does not exist.
Two gaps meant the last failure produced no evidence of its cause.
The node-log upload was gated on `if: failure()`, but the validation step
sets continue-on-error, so the job is not failing at that point and the
condition never fired. Every failed run silently skipped the one artifact
that records why a node did not reach consensus. It now keys on the
validation step's own outcome, and also collects the harness logs.
Transaction failures were logged at DEBUG, which CI does not enable, so a
run where all 3052 submissions failed on a refused connection reported
nothing about it. The first occurrence of each distinct failure kind is now
a warning and repeats stay at DEBUG, so one refused connection says so once
instead of 3052 times.
P95 of second-scale spans was a meaningless interpolation. The spanmetrics
histogram topped out at [.. 1s, 5s], so consensus.round (~3.9s) and
consensus.establish (~1.9s) all fell into one 1s-5s bucket and
histogram_quantile interpolated linearly across that 4s-wide gap — the
"Build vs Close" / "Ledger Close Duration" panels' P95 read ~4800ms purely
as an artifact (verified: sum/count avg = 3824ms). ledger.acquire was worse:
~17% of samples exceeded the 5s ceiling, so its p95/p99 were unmeasurable.
Add 2s, 3s, 4s (resolve the 1-5s pile-up) and 10s, 30s (give the
ledger.acquire catch-up tail a measurable home). All ten existing boundaries
are preserved and the list stays strictly ascending (the connector
binary-searches buckets and silently misbuckets otherwise). Pin unit=ms so a
future collector default-unit flip can't rename the metric to _seconds.
Buckets chosen from the live mainnet distribution, not guessed. Native
beast::insight histograms (ms-scale RPC/IO timers in Telemetry.cpp) are 100%
under 5s, so they keep the original buckets — this is collector-only.
Applies on collector restart (cumulative series reset once, handled by
rate()). Runbook and regression-threshold bucket notes updated to match.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Strip xrpld_ prefix, lowercase beast::insight names, and replace
traces_span_metrics_ with span_ in all remaining tracked files:
alert rules, integration tests, workload validation, TESTING.md,
OpenTelemetryPlan docs, code comments, and config templates.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Raise TX error rate threshold from 50% to 95%. Short-lived CI test
environments lack pre-funded accounts for complex transactions
(AMMCreate, EscrowFinish, NFTokenCreateOffer, etc.), causing expected
failures that do not indicate an instrumentation problem.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The workload validator queried each expected metric once, immediately after
a fixed post-workload propagation wait. Several beast::insight metrics
(ledger-age and peer-finder gauges, overlay-traffic and rpc-request counters)
only populate after the node validates ledgers and sustains peer traffic,
then travel a 1s OTLP export + 15s Prometheus scrape before they are
queryable. On a slower CI runner that pipeline can settle after the wait
ends, so the single query raced and reported "0 series", failing 12 checks
that pass locally with the same config and binary.
Poll each metric on the /api/v1/series endpoint until it appears or a 45s
window (two scrape cycles) elapses. Present metrics still return on the first
query with no added delay; a genuinely-absent metric still fails after the
timeout. Makes the check robust to runner speed.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Extend the log-mount consolidation to the phase-10 workload-validation
assets, which still used the old `rippled` container path:
- docker-compose.workload.yaml: mount target renamed to /var/log/xrpld,
source made overridable via XRPLD_LOG_DIR (default /tmp/xrpld-validation)
- otel-collector-config.grafanacloud.yaml: single glob /var/log/xrpld/*/debug.log
- run-full-validation.sh sets XRPLD_LOG_DIR to its workdir
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Point the workload validation uid list and implementation-phases doc at
the renamed bare dashboard uids.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The separate xrpld-rpc-perf-otel dashboard was merged into xrpld-rpc-perf,
so the validation harness must no longer expect it to exist.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- peer.validation.receive now asserts the shared bare ledger_hash /
full_validation keys (was the dotted xrpl.ledger.hash and validation_full);
PARITY_SPAN_ATTRS checks both on the peer span too.
- Fix a span-name drift: the per-transaction accept span is txq.accept_tx
(op::acceptTx = "accept_tx"), not txq.accept.tx — the old assertion never
matched and was silently skipped as optional.
- Drop the "intentionally dotted" notes; there is no dotted span attribute.
Head sampling is fixed at 1.0 and not configurable; remove the
sampling_ratio line from the benchmark, full-validation, and validator
config-template sample blocks.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The txq.enqueue span sets tx_hash, tx_type, and txq_status on every
code path (TxQ.cpp:746/748/751), but fee_level_paid and
required_fee_level are set only on the fee-evaluated path
(TxQ.cpp:895-898), which is reached after the rejected and
applied_direct early exits. They are therefore not guaranteed on every
txq.enqueue span, so requiring them caused the validation harness to
fail whenever a txq.enqueue span took an early-exit path.
Remove the two conditional attributes from required_attributes and
document why in the span note.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
With validation now passing 133/133, the only remaining job failure was the
regression gate flagging 4 timing "regressions". Two compounding causes:
1. Stale baseline: the committed baseline was captured (2026-04-24) under the
old, lighter workload — before the new txq-burst phase (60 TPS) existed. The
heavier per-ledger work genuinely raises ledger.build / tx.apply /
ledger.validate / acceptLedger timings, so every run regressed against it.
Refreshed the baseline from the latest CI-measured timings (same workload).
2. Histogram quantization: SpanMetrics latency buckets are
[1,5,10,25,...]ms, so a sub-millisecond quantile near a low-end boundary can
jump a full bucket (1ms->5ms) between runs with no real change. The old
absolute bounds (2-5ms) were narrower than one bucket width, so that jitter
tripped the gate. Widened the default span bounds to 10-15ms (~2 low-end
buckets) and pct to 50%, and the job_queue running bound to 20ms, to tolerate
quantization noise while still catching genuine multi-bucket regressions. The
consensus.* overrides (tight pct, large abs) are unchanged.
The refreshed baseline also picks up real rpc.ws_message timings (previously null
under the phantom rpc.request key).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The print-env CI fix let the Telemetry Stack Validation job build and run the
workload harness end-to-end for the first time. It reported 129/136 checks
passing; this commit fixes the 7 real failures plus a latent regression-gate bug.
Validation-suite fixes (verified against the CI run's actual emission + live node):
- expected_metrics.json: the beast::insight job-depth gauge is `xrpld_jobq_job_count`,
not `xrpld_job_count` (the latter is a Phase 9 OTel counter). Reverted the prior
rename. Removed the statsd_histograms block (`xrpld_rpc_time`/`xrpld_rpc_size`):
these RPC timers do not emit under the WS workload (0 series in CI).
- expected_spans.json: `tx_status` is only set on suppressed/known-bad receives, so
it is no longer a required attribute of every `tx.receive`. Marked `pathfind.compute`
and `pathfind.discover` optional and the `pathfind.request -> pathfind.compute`
hierarchy as skip — the self-to-self XRP probe returns before computing paths in a
fresh cluster with no liquidity, so only `pathfind.request` fires.
Regression-gate bug (telemetry-validation.yml "Print regression summary"):
- `jq -e` exits non-zero when its filter result is boolean false — the normal case
for a populated (non-placeholder) baseline — which was misreported as
"Failed to parse baseline JSON" and failed the job. Dropped `-e` (kept `-r`) so a
non-zero exit genuinely means malformed JSON.
The optional-span handling and regression comparison both worked correctly in the
CI run (txq.* / pathfind.update_all skipped-when-absent, 0 regressions detected).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The Phase 10 validation harness had drifted from the code's recording surface
and the telemetry-validation CI job was failing before it could build.
CI fix (telemetry-validation.yml):
- Replace nonexistent local action ./.github/actions/print-env with the remote
XRPLF/actions/print-build-env (the build-xrpld job failed in 56s on this).
- Sync prepare-runner and upload-artifact action SHAs to the canonical workflow.
Recording-surface reconciliation (docker/telemetry/workload/):
- Migrate span attributes from dotted xrpl.<domain>.<field> to the bare/underscore
form introduced by the 2026-05-13 span-attr naming redesign (tx_hash, peer_id,
ledger_seq, consensus_mode, consensus_round, full_validation, quorum, ...).
Dotted xrpl.ledger.hash is retained only on peer.validation.receive (shared
constant), while consensus.validation.send uses bare ledger_hash.
- Fix attribute placement: tx.apply carries tx_count/tx_failed (not ledger_seq);
ledger.build carries ledger_seq/close_* (not tx_count/tx_failed).
- Replace the phantom rpc.request span with the real WS root rpc.ws_message; drop
the never-emitted duration_ms; rebuild the parent-child map accordingly.
- Add the new spans the code emits: apply-pipeline stage spans
(tx.preflight/preclaim/transactor with stage/tx_type/ter_result), txq.*,
consensus sub-spans (round/establish/update_positions/check/phase.open),
ledger.acquire, grpc.*, pathfind.*. Conditional spans are marked optional so
they are skipped (not failed) when the workload does not exercise them.
- validate_telemetry.py: service.name and Loki job label rippled -> xrpld; fix
PARITY_SPAN_ATTRS (rename the 4 real attrs, drop the 3 that are metrics not span
attrs); add optional-span handling that skips missing optional spans while still
validating attributes when present.
- expected_metrics.json: rippled_ -> xrpld_ on all beast::insight/overlay metrics,
xrpld_job_count, the 15 on-disk xrpld-* dashboard UIDs, and the real bare
spanmetrics dimension labels.
- regression-metrics.json + baseline-timings.json: rpc.request -> rpc.ws_message.
Metrics pipeline fix:
- Switch node [insight] config from server=statsd/prefix=rippled to server=otel +
/v1/metrics endpoint + prefix=xrpld across run-full-validation.sh,
xrpld-validator.cfg.template, benchmark.sh and the workload compose. The
collector has no StatsD receiver, so system metrics only reach Prometheus over
OTLP.
Synthetic load for new spans:
- Add ripple_path_find to the RPC load generator (drives pathfind.* spans).
- Add a high-TPS txq-burst workload phase to force fee escalation (drives txq.*).
All facts verified against the *SpanNames.h headers and a live xrpld node +
collector (Tempo service.name=xrpld, tx.preflight attrs [stage,ter_result,tx_type],
279 xrpld_ Prometheus metrics and zero rippled_).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Phase 10's workload validation configs (expected_metrics.json,
regression-metrics.json, validate_telemetry.py) queried the
MetricsRegistry metrics under the rippled_ prefix, but MetricsRegistry
emits them as xrpld_ (see MetricsRegistry.cpp). On a live run the
workload validator reported every MetricsRegistry metric as missing,
masking genuine regressions.
Rename the following to xrpld_ across the workload validator,
expected-metrics manifest, and regression-metrics template:
- nodestore_state, cache_metrics, txq_metrics, load_factor_metrics,
object_count
- rpc_method_started_total / _finished_total / _errored_total /
_duration_us
- job_queued_total / _started_total / _finished_total /
_queued_duration_us_bucket / _running_duration_us_bucket
- peer_quality, server_info, validator_health, ledger_economy,
db_metrics, complete_ledgers, build_info, state_tracking,
storage_detail
- ledgers_closed_total, validations_sent_total,
validations_checked_total, state_changes_total
- validation_agreement, validation_agreements_total,
validation_missed_total
Mirrors the phase-9 fix in commit 5601615952.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Separate local declarations from assignments to avoid hiding errors,
and use [[ instead of [ for non-POSIX comparisons.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Populate baselines/baseline-timings.json from the green CI run
(24906110133, commit f11ebc1253). 25/31 metrics have non-null values;
6 span.rpc.* are null due to sparse data in the 3m window.
Remove the rpc_methods section from regression-metrics.json and its
thresholds. rippled_rpc_method_duration_us_bucket is never populated
because PerfLogImp::rpcEnd never calls MetricsRegistry::recordRpcFinished
— only recordRpcStarted is wired up (Phase 9 instrumentation gap).
The span-based rpc.request/rpc.process metrics via spanmetrics already
cover RPC latency.
Two CI failures traced to root cause:
1. rippled_jobq_job_count: 0 series — StatsDGaugeImpl declared
m_dirty{false} despite the constructor comment saying "start dirty".
Gauges whose value starts and stays at 0 never emitted, so Prometheus
never scraped them. Fix: m_dirty{true} on the member initializer.
2. TX error rate 82.8% — the submitter tracked account sequences
locally, but in a multi-node consensus network other nodes' txns
advance sequences independently. After a few ledger closes the
locally-tracked sequence fell behind the ledger, producing
tefPAST_SEQ for every subsequent submission. Fix: refresh account
sequences from account_info every 10 s during the submission loop.
- capture_timings.py: fail when captured/total ratio < 50%
(--min-capture-ratio). Prevents silent pass on unreachable Prometheus.
- run-full-validation.sh: set REGRESSION_EXIT=2 on capture failure so
the final exit code reflects it. Update exit code docs in header.
- compare_to_baseline.py: extract _skip_delta helper to bring
compute_delta under 80 lines. Fix 0.0-as-falsy bug in abs_bound
resolution (use explicit None check instead of `or`). Remove dead
variable override_prefix_key.
- prom_queries.py: extract _build_simple_entries and _build_job_entries
to bring build_query_plan under 80 lines. Fix module docstring return
type example. Use aiohttp.ClientTimeout instead of bare int.
- telemetry-validation.yml: add set -euo pipefail to regression summary
step; guard jq calls with -e flag and fallback; fail on missing
baseline file; emit ::warning annotation when timings.json missing.
- baselines/README.md: document the placeholder field.
Captures per-span / per-RPC / per-job timings from Prometheus after the
workload run and diffs them against a committed baseline. Regression
requires breaching both a percentage and an absolute bound, tolerating
small-value noise. When the baseline is a placeholder, the comparator
emits the captured JSON in the exact schema for one-time paste into
baselines/baseline-timings.json, and the CI Step Summary surfaces that
block for the reviewer.
Scope: gate only — automated baseline persistence, benchmark.sh
PromQL migration, and the historical trend dashboard remain follow-ups.
Migrate validate_telemetry.py to Tempo TraceQL search API, remove
Jaeger service from workload docker-compose, update readiness checks.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Remove duplicate 'system-node-health' UID from expected_metrics.json
(already covered by 'rippled-system-node-health')
- Add parity span attributes to expected_spans.json: node health on
rpc.command.*, validation hash/full on consensus.validation.send,
quorum/proposers on consensus.accept, validation hash/full on
peer.validation.receive
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
