mirror of
https://github.com/EvernodeXRPL/hpcore.git
synced 2026-04-29 15:37:59 +00:00
49 lines
2.2 KiB
Markdown
49 lines
2.2 KiB
Markdown
# Hot Pocket Consensus Engine
|
|
|
|
## What's here?
|
|
*In development*
|
|
|
|
A C++ version of hotpocket designed for production envrionments, original prototype here: https://github.com/codetsunami/hotpocket
|
|
|
|
## Libraries
|
|
* Crypto - Libsodium https://github.com/jedisct1/libsodium
|
|
* Websockets - Boost|Beast https://github.com/boostorg/beast
|
|
* RapidJSON - http://rapidjson.org
|
|
* Protocol - https://github.com/protocolbuffers/protobuf
|
|
|
|
## Steps to setup Hot Pocket
|
|
|
|
### Install Libsodium
|
|
Instructions are based on [this](https://libsodium.gitbook.io/doc/installation).
|
|
|
|
1. Download and extract Libsodium 1.0.18 from [here](https://download.libsodium.org/libsodium/releases/libsodium-1.0.18-stable.tar.gz).
|
|
2. Navigate to the extracted libsodium directory in a terminal.
|
|
3. Run `./configure`
|
|
4. Run `make && make check`
|
|
5. Run `sudo make install`
|
|
|
|
#### Install Boost
|
|
Following Instructions are based on Boost [getting started](https://www.boost.org/doc/libs/1_71_0/more/getting_started/unix-variants.html#prepare-to-use-a-boost-library-binary)
|
|
|
|
1. Download and extract boost 1.71 package from [here](https://www.boost.org/users/history/version_1_71_0.html).
|
|
2. Navigate to the extracted boost directory in a terminal.
|
|
3. Run `./bootstrap.sh`
|
|
4. Run `sudo ./b2 install` (This will compile and install boost libraries into your `/usr/local/lib`)
|
|
|
|
#### Install RapidJSON
|
|
1. Download and extract RapidJSON 1.1 source from [here](https://github.com/Tencent/rapidjson/archive/v1.1.0.tar.gz).
|
|
2. Navigate to the extracted directory.
|
|
3. Run `sudo cp -r include/rapidjson /usr/local/include/`
|
|
|
|
#### Run ldconfig
|
|
1. Run `sudo ldconfig`
|
|
|
|
This will update your library cache and avoid potential issues when running your compiled C++ program which links to newly installed libraries.
|
|
|
|
#### Build and run Hot Pocket
|
|
1. navigate to hotpocket repo root.
|
|
2. Run `make`
|
|
3. Run `./build/hpcore new ~/mycontract`. This will initialize a new contract directory `mycontract` in your home directory.
|
|
4. Take a look at `~/mycontract/cfg/hp.cfg`. This is your new contract config file. You can modify it according to your contract hosting requirements.
|
|
5. Optional: Run `./build/hpcore rekey ~/mycontract` to generate new public/private key pair.
|
|
6. Run `./build/hpcore run ~/mycontract` to run your smart contract (to do). |