diff --git a/content/tutorials/manage-the-rippled-server/configuration/configure-statsd.md b/content/tutorials/manage-the-rippled-server/configuration/configure-statsd.md
new file mode 100644
index 0000000000..0018eea3bc
--- /dev/null
+++ b/content/tutorials/manage-the-rippled-server/configuration/configure-statsd.md
@@ -0,0 +1,46 @@
+# Configure StatsD
+
+ The client implementation of [StatsD](https://github.com/statsd/statsd) within rippled can be enabled to export health and behavioral information about the server. Those metrics can be consumed and visualized through [`rippledmon`](https://github.com/ripple/rippledmon) or any other collector that accepts StatsD formatted metrics.
+
+
+ ## Configuration Steps
+
+ To enable StatsD on your rippled server, perform the following steps:
+
+1. Configure rippledmon on a separate machine. For more information about configuring `rippledmon` see the `rippledmon` [repository](https://github.com/ripple/rippledmon).
+
+
+0. Add the `[insight]` stanaza to your `rippled`'s config file. The stanza should contain the address that you would like to send StatsD metrics to followed by the port number that `rippledmon` is listneing on.
+
+        [insight]
+        server=statsd
+        address=192.0.2.0:8125
+        prefix=my_rippled
+
+
+0. Restart the `rippled` service.
+
+        $ sudo systemctl restart rippled
+
+For a quick way to check if metrics are being exported, try the following command:
+
+        $ tcpdump -i en0 | grep UDP
+
+Replace en0 with the appropriate network interface for your machine. 
+
+Sample Output:
+
+        00:41:53.066333 IP 10.0.0.203.63409 > 192.0.2.0.8125: UDP, length 196
+
+If you periodically see the 8125 port suffix on the destination address, you can be confident that your server is properly exporting StatsD metrics.
+
+For descriptions of each StatsD metric see the `rippledmon` [repository](https://github.com/ripple/rippledmon)
+
+
+
+
+
+
+
+
+