* Txs with the same fee level will sort by TxID XORed with the parent
ledger hash.
* The TxQ is re-sorted after every ledger.
* Attempt to future-proof the TxQ tie breaking test
* Sort by fee level (which is the current behavior) then by transaction
ID (hash).
* Edge case when the account at the end of the queue submits a higher
paying transaction to walk backwards and compare against the cheapest
transaction from a different account.
* Use std::if_any to simplify the JobQueue::isOverloaded loop.
The existing code that deserialized an STAmount was sub-optimal and performed
poorly. In some rare cases the operation could result in otherwise valid
serialized amounts overflowing during deserialization. This commit will help
detect error conditions more quickly and eliminate the problematic corner cases.
* If multiple transactions are queued for the account, change the
account's sequence number in a temporary view before processing the
transaction.
* Adds a new "at()" interface to STObject which is identical to the
operator[], but easier to write and read when dealing with ptrs.
* Split the TxQ tests into two suites to speed up parallel run times.
Tickets are a mechanism to allow for the "out-of-order" execution of
transactions on the XRP Ledger.
This commit, if merged, reworks the existing support for tickets and
introduces support for 'ticket batching', completing the feature set
needed for tickets.
The code is gated under the newly-introduced `TicketBatch` amendment
and the `Tickets` amendment, which is not presently active on the
network, is being removed.
The specification for this change can be found at:
https://github.com/xrp-community/standards-drafts/issues/16
* Make sure variables are always initialized
* Use lround instead of adding .5 and casting
* Remove some unneeded vars
* Check for null before calling strcmp
* Remove redundant if conditions
* Remove make_TxQ factory function
STAmount::soTime and soTime2 were time based "amendment like"
switches to control small changes in behavior for STAmount.
soTime2, which was the most recent, was dated Feb 27, 2016.
That's over 3 years ago.
The main reason to retain these soTimes would be to replay
old transactions. The likelihood of needing to replay a
transaction from over three years ago is pretty low. So it
makes sense to remove these soTime values.
In Flow_test the testZeroOutputStep() test is removed. That
test started to fail when the STAmount::soTimes were removed.
I checked with the original author of the test. He said
that the code being tested by that unit test has been removed,
so it makes sense to remove the test. That test is removed.
FIXES: #2847
* Transactions that are submitted with the fail_hard flag
and that result in any TER code besides tesSUCCESS shall
be neither queued nor held.
[FOLD] Keep tec results out of the open ledger when fail_hard:
* Improve TransactionStatus const correctness, and remove redundant
`local` check
* Check open ledger tx count in fail_hard tests
* Fix some wrapping
* Remove duplicate test
Remove the implicit conversion from int64 to XRPAmount. The motivation for this
was noticing that many calls to `to_string` with an integer parameter type were
calling the wrong `to_string` function. Since the calls were not prefixed with
`std::`, and there is no ADL to call `std::to_string`, this was converting the
int to an `XRPAmount` and calling `to_string(XRPAmount)`.
Since `to_string(XRPAmount)` did the same thing as `to_string(int)` this error
went undetected.
If merged, this commit will report additional information in the
response to the submit command; this will make it easier for developers
to accurately track the status of transaction submission.
Fixes#2851
The XRP Ledger utilizes an account model. Unlike systems based on a UTXO
model, XRP Ledger accounts are first-class objects. This design choice
allows the XRP Ledger to offer rich functionality, including the ability
to own objects (offers, escrows, checks, signer lists) as well as other
advanced features, such as key rotation and configurable multi-signing
without needing to change a destination address.
The trade-off is that accounts must be stored on ledger. The XRP Ledger
applies reserve requirements, in XRP, to protect the shared global ledger
from growing excessively large as the result of spam or malicious usage.
Prior to this commit, accounts had been permanent objects; once created,
they could never be deleted.
This commit introduces a new amendment "DeletableAccounts" which, if
enabled, will allow account objects to be deleted by executing the new
"AccountDelete" transaction. Any funds remaining in the account will
be transferred to an account specified in the deletion transaction.
The amendment changes the mechanics of account creation; previously
a new account would have an initial sequence number of 1. Accounts
created after the amendment will have an initial sequence number that
is equal to the ledger in which the account was created.
Accounts can only be deleted if they are not associated with any
obligations (like RippleStates, Escrows, or PayChannels) and if the
current ledger sequence number exceeds the account's sequence number
by at least 256 so that, if recreated, the account can be protected
from transaction replay.
At this point all of the jss::* names are defined in the same
file. That file has been named JsonFields.h. That file name
has little to do with either JsonStaticStrings (which is what
jss is short for) or with jss. The file is renamed to jss.h
so the file name better reflects what the file contains.
All includes of that file are fixed. A few include order
issues are tidied up along the way.
* Using txnsExpected_, which is influenced by both the config
and network behavior, can reserve far too much or far too
little memory, wasting time and resources.
* Not an issue during normal operation, but a user could
cause problems on their local node with extreme configuration
settings.
* Relevant when deciding whether an account can queue multiple
transactions. If the potential spend of the already queued
transactions would dip into the reserve, the reserve is
preserved for fees.
* Also change several direct modifications of the owner count to
call adjustOwnerCount to preserve overflow checking.
* Update related unit testcase
* Resolves#2251
The FeeEscalation amendment has been enabled on the XRP Ledger network
since May 19, 2016. The transaction which activated this amendment is:
5B1F1E8E791A9C243DD728680F108FEF1F28F21BA3B202B8F66E7833CA71D3C3.
This change removes all conditional code based around the FeeEscalation
amendment, but leaves the amendment definition itself since removing the
definition would cause nodes to think an unknown amendment was activate
causing them to become amendment blocked.
The commit also removes the redundant precomputed hashes from the
supportedAmendments vector.
* When increasing the expected ledger size, add on an extra 20%.
* When decreasing the expected ledger size, take the minimum of the
validated ledger size or the old expected size, and subract another 50%.
* Update fee escalation documentation.
* Refactor the FeeMetrics object to use values from Setup
* mFeeDue is only used in one place by one derived class, so
only compute it as a local in that function.
* The baseFee needs to be calculated outside of the Transactor class
because, it can change during transaction processing, and the function
is static, so we need to be sure to call the right version
* Rename Transactor::calculateFee to minimumFee
* The compiler can provide many non-explicit constructors for
aggregate types. This is sometimes desired, but it can
happen accidentally, resulting in run-time errors.
* This commit assures that no types are aggregates unless existing
code is using aggregate initialization.
* Stores recent history of "good" ledgers. Uses the maximum as the
expected ledger size. When a large value drops off, use a 90%
backoff to go down to to the new maximum.
* If consensus is unhealthy, wipe the history in addition to the current
clamping.
* Include .md doc files in xcode and VS projects
* If the transaction can't be queued, recover to the open ledger once,
and drop it on the next attempt.
* New result codes for transactions that can not queue.
* Add minimum queue size.
* Remove the obsolete and incorrect SF_RETRY flag.
* fix#2215
* RPC `ledger` command returns all queue entries in "queue_data"
when requesting open ledger, and including boolean "queue: true".
* Includes queue state. e.g.: fee_level, retries, last_result, tx.
* Respects "expand" and "binary" parameters for the txs.
* Remove some unused code.
* If an account has any transactions in the transaction queue, submitting
a transaction that covers the differences to the open ledger fee level
for prior queued transactions plus itself will cause all those
transactions to be applied to the open ledger.
* tel failures in `TxQ::accept` will leave tx in the queue to retry later.
* Account-related queue stats (RIPD-1205). Boolean "queue" parameter to
account_info only if requesting the open ledger.
* Account for the TxQ when autofilling sequence in sign-and-submit (RIPD-1206)
* Tweak TxQ::accept edge case when choosing which tx to try next.
* Labels for experimental "x_" submit parameters use correct separator.
=== Release Notes ===
==== New features ====
When requesting `account_info` for the open ledger, include the `queue :
true` to get extra information about any queued transactions for this
account. (RIPD-1205).
==== Bug fixes ====
When using sign-and-submit mode to autofill a transaction's sequence
number, the logic will not reuse a sequence number that is in the queue
for this account. (RIPD-1206).
Labels for experimental "x_queue_okay" and "x_assume_tx" parameters to
`sign` and `submit` updated to use correct separator.
* Minimum factor 256*500, don't multiply by base fee
* Change autofill fee behavior to pay the open ledger fee.
** Experimental options: x-assume-tx - assume <int> more transactions in
the open queue when computing escalated fee, x-queue-okay - if true
and escalated fee is over limit, try with load fee.
* Port of 75af4ed.
