mirror of
https://github.com/XRPLF/rippled.git
synced 2025-12-06 17:27:55 +00:00
* Fix: Don't flag consensus as stalled prematurely (#5658) Fix stalled consensus detection to prevent false positives in situations where there are no disputed transactions. Stalled consensus detection was added to 2.5.0 in response to a network consensus halt that caused a round to run for over an hour. However, it has a flaw that makes it very easy to have false positives. Those false positives are usually mitigated by other checks that prevent them from having an effect, but there have been several instances of validators "running ahead" because there are circumstances where the other checks are "successful", allowing the stall state to be checked. * Set version to 2.5.1 * fix: Skip processing transaction batch if the batch is empty (#5670) Avoids an assertion failure in NetworkOPsImp::apply in the unlikely event that all incoming transactions are invalid. * Fix: EscrowTokenV1 (#5571) * resolves an accounting inconsistency in MPT escrows where transfer fees were not properly handled when unlocking escrowed tokens. * refactor: Wrap GitHub CI conditionals in curly braces (#5796) This change wraps all GitHub conditionals in `${{ .. }}`, both for consistency and to reduce unexpected failures, because it was previously noticed that not all conditionals work without those curly braces. * Only notify clio for PRs targeting the release and master branches (#5794) Clio should only be notified when releases are about to be made, instead of for all PR, so this change only notifies Clio when a PR targets the release or master branch. * Support DynamicMPT XLS-94d (#5705) * extends the functionality of the MPTokenIssuanceSet transaction, allowing the issuer to update fields or flags that were explicitly marked as mutable during creation. * Bugfix: Adds graceful peer disconnection (#5669) The XRPL establishes connections in three stages: first a TCP connection, then a TLS/SSL handshake to secure the connection, and finally an upgrade to the bespoke XRP Ledger peer-to-peer protocol. During connection termination, xrpld directly closes the TCP connection, bypassing the TLS/SSL shutdown handshake. This makes peer disconnection diagnostics more difficult - abrupt TCP termination appears as if the peer crashed rather than disconnected gracefully. This change refactors the connection lifecycle with the following changes: - Enhanced outgoing connection logic with granular timeouts for each connection stage (TCP, TLS, XRPL handshake) to improve diagnostic capabilities - Updated both PeerImp and ConnectAttempt to use proper asynchronous TLS shutdown procedures for graceful connection termination * Downgrade to boost 1.83 * Set version to 2.6.1-rc1 * chore: Use self hosted windows runners (#5780) This changes switches from the GitHub-managed Windows runners to self-hosted runners to significantly reduce build time. * Rename mutable flags (#5797) This is a minor change on top of #5705 * fix(amendment): Add missing fields for keylets to ledger objects (#5646) This change adds a fix amendment (`fixIncludeKeyletFields`) that adds: * `sfSequence` to `Escrow` and `PayChannel` * `sfOwner` to `SignerList` * `sfOracleDocumentID` to `Oracle` This ensures that all ledger entries hold all the information needed to determine their keylet. * chore: Limits CI build and test parallelism to reduce resource contention (#5799) GitHub runners have a limit on how many concurrent jobs they can actually process (even though they will try to run them all at the same time), and similarly the Conan remote cannot handle hundreds of concurrent requests. Previously, the Conan dependency uploading was already limited to max 10 jobs running in parallel, and this change makes the same change to the build+test workflow. * chore: Build and test all configs for daily scheduled run (#5801) This change re-enables building and testing all configurations, but only for the daily scheduled run. Previously all configurations were run for each merge into the develop branch, but that overwhelmed both the GitHub runners and the Conan remote, and thus they were limited to just a subset of configurations. Now that the number of jobs is limited via `max-parallel: 10`, we should be able to safely enable building all configurations again. However, building them all once a day instead of for each PR merge should be sufficient. * chore: Add unit tests dir to code coverage excludes (#5803) This change excludes unit test code from code coverage reporting. * refactor: Modularise ledger (#5493) This change moves the ledger code to libxrpl. * Mark PermissionDelegation as unsupported * Set version to 2.6.1-rc2 * Miscellaneous refactors and updates (#5590) - Added a new Invariant: `ValidPseudoAccounts` which checks that all pseudo-accounts behave consistently through creation and updates, and that no "real" accounts look like pseudo-accounts (which means they don't have a 0 sequence). - `to_short_string(base_uint)`. Like `to_string`, but only returns the first 8 characters. (Similar to how a git commit ID can be abbreviated.) Used as a wrapped sink to prefix most transaction-related messages. More can be added later. - `XRPL_ASSERT_PARTS`. Convenience wrapper for `XRPL_ASSERT`, which takes the `function` and `description` as separate parameters. - `SField::sMD_PseudoAccount`. Metadata option for `SField` definitions to indicate that the field, if set in an `AccountRoot` indicates that account is a pseudo-account. Removes the need for hard-coded field lists all over the place. Added the flag to `AMMID` and `VaultID`. - Added functionality to `SField` ctor to detect both code and name collisions using asserts. And require all SFields to have a name - Convenience type aliases `STLedgerEntry::const_pointer` and `STLedgerEntry::const_ref`. (`SLE` is an alias to `STLedgerEntry`.) - Generalized `feeunit.h` (`TaggedFee`) into `unit.h` (`ValueUnit`) and added new "BIPS"-related tags for future use. Also refactored the type restrictions to use Concepts. - Restructured `transactions.macro` to do two big things 1. Include the `#include` directives for transactor header files directly in the macro file. Removes the need to update `applySteps.cpp` and the resulting conflicts. 2. Added a `privileges` parameter to the `TRANSACTION` macro, which specifies some of the operations a transaction is allowed to do. These `privileges` are enforced by invariant checks. Again, removed the need to update scattered lists of transaction types in various checks. - Unit tests: 1. Moved more helper functions into `TestHelpers.h` and `.cpp`. 2. Cleaned up the namespaces to prevent / mitigate random collisions and ambiguous symbols, particularly in unity builds. 3. Generalized `Env::balance` to add support for `MPTIssue` and `Asset`. 4. Added a set of helper classes to simplify `Env` transaction parameter classes: `JTxField`, `JTxFieldWrapper`, and a bunch of classes derived or aliased from it. For an example of how awesome it is, check the changes `src/test/jtx/escrow.h` for how much simpler the definitions are for `finish_time`, `cancel_time`, `condition`, and `fulfillment`. 5. Generalized several of the amount-related helper classes to understand `Asset`s. 6. `env.balance` for an MPT issuer will return a negative number (or 0) for consistency with IOUs. * refactor: Simplify STParsedJSON with some helper functions (#5591) - Add code coverage for STParsedJSON edge cases Co-authored-by: Denis Angell <dangell@transia.co> * test: Add STInteger and STParsedJSON tests (#5726) This change is to improve code coverage (and to simplify #5720 and #5725); there is otherwise no change in functionality. The change adds basic tests for `STInteger` and `STParsedJSON`, so it becomes easier to test smaller changes to the types, as well as removes `STParsedJSONArray`, since it is not used anywhere (including in Clio). * Revert "Update Conan dependencies: OpenSSL" (#5807) This change reverts #5617, because it will require extensive testing that will take up more time than we have before the next scheduled release. Reverting this change does not mean we are abandoning it. We aim to pick it back up once there's a sufficient time window to allow for testing on multiple distros running a mixture of OpenSSL 1.x and 3.x. * docs: Add warning about using std::counting_semaphore (#5595) This adds a comment to avoid using `std::counting_semaphore` until the minimum compiler versions of GCC and Clang have been updated to no longer contain the bug that is present in older compilers. * Improve ValidatorList invalid UNL manifest logging (#5804) This change raises logging severity from `INFO` to `WARN` when handling UNL manifest signed with an unexpected / invalid key. It also changes the internal error code for an invalid format of UNL manifest to `invalid` (from `untrusted`). This is a follow up to problems experienced by an UNL node due to old manifest key configured in `validators.txt`, which would be easier to diagnose with improved logging. It also replaces a log line with `UNREACHABLE` for an impossible situation when we match UNL manifest key against a configured key which has an invalid type (we cannot configure such a key because of checks when loading configured keys). * chore: Pin all CI Docker tags (#5813) To avoid surprises and ensure reproducibility, this change pins all CI Docker image tags to the latest version in the XRPLF/CI repo. * change `fixPriceOracleOrder` to `Supported::yes` (#5749) * fix: Address http header case sensitivity (#5767) This change makes the regex in `HttpClient.cpp` that matches the content-length http header case insensitive to improve compatibility, as http headers are case insensitive. * test: add more comprehensive tests for `FeeVote` (#5746) This change adds more comprehensive tests for the `FeeVote` module, which previously only checked the basics, and not the more comprehensive flows in that class. * ci: Call all reusable workflows reusable (#5818) * Add `STInt32` as a new `SType` (#5788) This change adds `STInt32` as a new `SType` under the `STInteger` umbrella, with `SType` value `12`. This is the first and only `STInteger` type that supports negative values. * switch `fixIncludeKeyletFields` to `Supported::yes` (#5819) * refactor: Restructure Transactor::preflight to reduce boilerplate (#5592) * Restructures `Transactor::preflight` to create several functions that will remove the need for error-prone boilerplate code in derived classes' implementations of `preflight`. * refactor: Add support for extra transaction signatures (#5594) * Restructures Transactor signature checking code to be able to handle a `sigObject`, which may be the full transaction, or may be an object field containing a separate signature. Either way, the `sigObject` can be a single- or multi-sign signature. * ci: Upload artifacts during build and test in a separate job (#5817) * chore: Set free-form CI inputs as env vars (#5822) This change moves CI values that could be user-provided into environment variables. * Rename flags for DynamicMPT (#5820) * Set version to 2.6.1 * fix: FD/handle guarding + exponential backoff (#5823) * fix: Transaction sig checking functions do not get a full context (#5829) Fixes a (currently harmless) bug introduced by PR #5594 * Remove bogus coverage warning (#5838) * fix return type --------- Co-authored-by: Ed Hennis <ed@ripple.com> Co-authored-by: Jingchen <a1q123456@users.noreply.github.com> Co-authored-by: Denis Angell <dangell@transia.co> Co-authored-by: Bart <bthomee@users.noreply.github.com> Co-authored-by: yinyiqian1 <yqian@ripple.com> Co-authored-by: Vito Tumas <5780819+Tapanito@users.noreply.github.com> Co-authored-by: Bronek Kozicki <brok@incorrekt.com> Co-authored-by: Mayukha Vadari <mvadari@ripple.com> Co-authored-by: Valentin Balaschenko <13349202+vlntb@users.noreply.github.com> Co-authored-by: tequ <git@tequ.dev> Co-authored-by: Ayaz Salikhov <mathbunnyru@users.noreply.github.com>
189 lines
6.5 KiB
C++
189 lines
6.5 KiB
C++
//------------------------------------------------------------------------------
|
|
/*
|
|
This file is part of rippled: https://github.com/ripple/rippled
|
|
Copyright (c) 2012, 2013 Ripple Labs Inc.
|
|
|
|
Permission to use, copy, modify, and/or distribute this software for any
|
|
purpose with or without fee is hereby granted, provided that the above
|
|
copyright notice and this permission notice appear in all copies.
|
|
|
|
THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
ANY SPECIAL , DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
//==============================================================================
|
|
|
|
#ifndef RIPPLE_PROTOCOL_PROTOCOL_H_INCLUDED
|
|
#define RIPPLE_PROTOCOL_PROTOCOL_H_INCLUDED
|
|
|
|
#include <xrpl/basics/ByteUtilities.h>
|
|
#include <xrpl/basics/base_uint.h>
|
|
|
|
#include <cstdint>
|
|
|
|
namespace ripple {
|
|
|
|
/** Protocol specific constants.
|
|
|
|
This information is, implicitly, part of the protocol.
|
|
|
|
@note Changing these values without adding code to the
|
|
server to detect "pre-change" and "post-change"
|
|
will result in a hard fork.
|
|
|
|
@ingroup protocol
|
|
*/
|
|
/** Smallest legal byte size of a transaction. */
|
|
std::size_t constexpr txMinSizeBytes = 32;
|
|
|
|
/** Largest legal byte size of a transaction. */
|
|
std::size_t constexpr txMaxSizeBytes = megabytes(1);
|
|
|
|
/** The maximum number of unfunded offers to delete at once */
|
|
std::size_t constexpr unfundedOfferRemoveLimit = 1000;
|
|
|
|
/** The maximum number of expired offers to delete at once */
|
|
std::size_t constexpr expiredOfferRemoveLimit = 256;
|
|
|
|
/** The maximum number of metadata entries allowed in one transaction */
|
|
std::size_t constexpr oversizeMetaDataCap = 5200;
|
|
|
|
/** The maximum number of entries per directory page */
|
|
std::size_t constexpr dirNodeMaxEntries = 32;
|
|
|
|
/** The maximum number of pages allowed in a directory */
|
|
std::uint64_t constexpr dirNodeMaxPages = 262144;
|
|
|
|
/** The maximum number of items in an NFT page */
|
|
std::size_t constexpr dirMaxTokensPerPage = 32;
|
|
|
|
/** The maximum number of owner directory entries for account to be deletable */
|
|
std::size_t constexpr maxDeletableDirEntries = 1000;
|
|
|
|
/** The maximum number of token offers that can be canceled at once */
|
|
std::size_t constexpr maxTokenOfferCancelCount = 500;
|
|
|
|
/** The maximum number of offers in an offer directory for NFT to be burnable */
|
|
std::size_t constexpr maxDeletableTokenOfferEntries = 500;
|
|
|
|
/** The maximum token transfer fee allowed.
|
|
|
|
Token transfer fees can range from 0% to 50% and are specified in tenths of
|
|
a basis point; that is a value of 1000 represents a transfer fee of 1% and
|
|
a value of 10000 represents a transfer fee of 10%.
|
|
|
|
Note that for extremely low transfer fees values, it is possible that the
|
|
calculated fee will be 0.
|
|
*/
|
|
std::uint16_t constexpr maxTransferFee = 50000;
|
|
|
|
/** The maximum length of a URI inside an NFT */
|
|
std::size_t constexpr maxTokenURILength = 256;
|
|
|
|
/** The maximum length of a Data element inside a DID */
|
|
std::size_t constexpr maxDIDDocumentLength = 256;
|
|
|
|
/** The maximum length of a URI inside a DID */
|
|
std::size_t constexpr maxDIDURILength = 256;
|
|
|
|
/** The maximum length of an Attestation inside a DID */
|
|
std::size_t constexpr maxDIDAttestationLength = 256;
|
|
|
|
/** The maximum length of a domain */
|
|
std::size_t constexpr maxDomainLength = 256;
|
|
|
|
/** The maximum length of a URI inside a Credential */
|
|
std::size_t constexpr maxCredentialURILength = 256;
|
|
|
|
/** The maximum length of a CredentialType inside a Credential */
|
|
std::size_t constexpr maxCredentialTypeLength = 64;
|
|
|
|
/** The maximum number of credentials can be passed in array */
|
|
std::size_t constexpr maxCredentialsArraySize = 8;
|
|
|
|
/** The maximum number of credentials can be passed in array for permissioned
|
|
* domain */
|
|
std::size_t constexpr maxPermissionedDomainCredentialsArraySize = 10;
|
|
|
|
/** The maximum length of MPTokenMetadata */
|
|
std::size_t constexpr maxMPTokenMetadataLength = 1024;
|
|
|
|
/** The maximum amount of MPTokenIssuance */
|
|
std::uint64_t constexpr maxMPTokenAmount = 0x7FFF'FFFF'FFFF'FFFFull;
|
|
|
|
/** The maximum length of Data payload */
|
|
std::size_t constexpr maxDataPayloadLength = 256;
|
|
|
|
/** Vault withdrawal policies */
|
|
std::uint8_t constexpr vaultStrategyFirstComeFirstServe = 1;
|
|
|
|
/** Default IOU scale factor for a Vault */
|
|
std::uint8_t constexpr vaultDefaultIOUScale = 6;
|
|
/** Maximum scale factor for a Vault. The number is chosen to ensure that
|
|
1 IOU can be always converted to shares.
|
|
10^19 > maxMPTokenAmount (2^64-1) > 10^18 */
|
|
std::uint8_t constexpr vaultMaximumIOUScale = 18;
|
|
|
|
/** Maximum recursion depth for vault shares being put as an asset inside
|
|
* another vault; counted from 0 */
|
|
std::uint8_t constexpr maxAssetCheckDepth = 5;
|
|
|
|
/** A ledger index. */
|
|
using LedgerIndex = std::uint32_t;
|
|
|
|
/** A transaction identifier.
|
|
The value is computed as the hash of the
|
|
canonicalized, serialized transaction object.
|
|
*/
|
|
using TxID = uint256;
|
|
|
|
/** The maximum number of trustlines to delete as part of AMM account
|
|
* deletion cleanup.
|
|
*/
|
|
std::uint16_t constexpr maxDeletableAMMTrustLines = 512;
|
|
|
|
/** The maximum length of a URI inside an Oracle */
|
|
std::size_t constexpr maxOracleURI = 256;
|
|
|
|
/** The maximum length of a Provider inside an Oracle */
|
|
std::size_t constexpr maxOracleProvider = 256;
|
|
|
|
/** The maximum size of a data series array inside an Oracle */
|
|
std::size_t constexpr maxOracleDataSeries = 10;
|
|
|
|
/** The maximum length of a SymbolClass inside an Oracle */
|
|
std::size_t constexpr maxOracleSymbolClass = 16;
|
|
|
|
/** The maximum allowed time difference between lastUpdateTime and the time
|
|
of the last closed ledger
|
|
*/
|
|
std::size_t constexpr maxLastUpdateTimeDelta = 300;
|
|
|
|
/** The maximum price scaling factor
|
|
*/
|
|
std::size_t constexpr maxPriceScale = 20;
|
|
|
|
/** The maximum percentage of outliers to trim
|
|
*/
|
|
std::size_t constexpr maxTrim = 25;
|
|
|
|
/** The maximum number of delegate permissions an account can grant
|
|
*/
|
|
std::size_t constexpr permissionMaxSize = 10;
|
|
|
|
/** The maximum number of transactions that can be in a batch. */
|
|
std::size_t constexpr maxBatchTxCount = 8;
|
|
|
|
/** EC ElGamal ciphertext length 33-byte */
|
|
std::size_t constexpr ecGamalEncryptedLength = 33;
|
|
|
|
/** EC ElGamal ciphertext length: two 33-byte components concatenated */
|
|
std::size_t constexpr ecGamalEncryptedTotalLength = 66;
|
|
} // namespace ripple
|
|
|
|
#endif
|