Introduce a new ledger type: ltCHECK
Introduce three new transactions that operate on checks:
- "CheckCreate" which adds the check entry to the ledger. The
check is a promise from the source of the check that the
destination of the check may cash the check and receive up to
the SendMax specified on the check. The check may have an
expiration, after which the check may no longer be cashed.
- "CheckCash" is a request by the destination of the check to
transfer a requested amount of funds, up to the check's SendMax,
from the source to the destination. The destination may receive
less than the SendMax due to transfer fees.
When cashing a check, the destination specifies the smallest
amount of funds that will be acceptable. If the transfer
completes and delivers the requested amount, then the check is
considered cashed and removed from the ledger. If enough funds
cannot be delivered, then the transaction fails and the check
remains in the ledger.
Attempting to cash the check after its expiration will fail.
- "CheckCancel" removes the check from the ledger without
transferring funds. Either the check's source or destination
can cancel the check at any time. After a check has expired,
any account can cancel the check.
Facilities related to checks are on the "Checks" amendment.
In some cases this script did not detect properly that the subprocess is already terminated. The "append" loop afterwards caused memory to fill up and the script to fail eventually.
The DepositAuth feature allows an account to require that
it signs for any funds that are deposited to the account.
For the time being this limits the account to accepting
only XRP, although there are plans to allow IOU payments
in the future.
The lsfDepositAuth protections are not extended to offers.
If an account creates an offer it is in effect saying, “I
will accept funds from anyone who takes this offer.”
Therefore, the typical user of the lsfDepositAuth flag
will choose never to create any offers. But they can if
they so choose.
The DepositAuth feature leaves a small gap in its
protections. An XRP payment is allowed to a destination
account with the lsfDepositAuth flag set if:
- The Destination XRP balance is less than or equal to
the base reserve and
- The value of the XRP Payment is less than or equal to
the base reserve.
This exception is intended to make it impossible for an
account to wedge itself by spending all of its XRP on fees
and leave itself unable to pay the fee to get more XRP.
This commit
- adds featureDepositAuth,
- adds the lsfDepositAuth flag,
- adds support for lsfDepositAuth in SetAccount.cpp
- adds support in Payment.cpp for rejecting payments that
don't meet the lsfDepositAuth requirements,
- adds unit tests for Payment transactions to an an account
with lsfDepositAuth set.
- adds Escrow and PayChan support for lsfDepositAuth along
with as unit tests.
* Update unity build for RocksDB changes
* Log RocksDB options on startup
* Support RocksDB option strings
* Support full file bloom filters
You can now configure most RocksDB options with RocksDB's option
string scheme.
Set "filter_full" to 1 to make bloom filters for an
entire file rather than each block. More memory will be
needed during compaction but less memory will be needed
during fetching for large databases. Does nothing unless
bloom filters are enabled with "filter_bits".
Example:
options = max_compaction_bytes=64;max_bytes_for_level_multiplier=64
clock_cache_mb = 96
filter_bits = 10
filter_full = 1
Both Tickets and SHAMapV2 have been around for a while and don't
look like they will be enabled on the network soon. So they are
removed from the supportedAmendments list. This prevents Env
from automatically testing with Tickets or SHAMapV2 enabled,
although testing with those features can still be explicitly
specified.
Drive-by cleanups:
o supportedAmendments() returns a const reference rather than
a fresh vector on each call.
o supportedAmendments() implementation moved from Amendments.cpp
to Feature.cpp. Amendments.cpp deleted.
o supportedAmendments() declared in Feature.h. All other
declarations deleted.
o preEnabledAmendments() removed, since it was empty and only
used in one place. It will be easy to re-add when it is needed.
o jtx::all_features_except() renamed to
jtx::supported_features_except(), which is more descriptive.
o jtx::all_amendments() renamed to jxt::supported_amendments()
o jtx::with_features() renamed to with_only_features()
o Env_test.cpp adjusted since featureTickets is no longer
automatically enabled for unit tests.
- Separate `Scheduler` from `BasicNetwork`.
- Add an event/collector framework for monitoring invariants and calculating statistics.
- Allow distinct network and trust connections between Peers.
- Add a simple routing strategy to support broadcasting arbitrary messages.
- Add a common directed graph (`Digraph`) class for representing network and trust topologies.
- Add a `PeerGroup` class for simpler specification of the trust and network topologies.
- Add a `LedgerOracle` class to ensure distinct ledger histories and simplify branch checking.
- Add a `Submitter` to send transactions in at fixed or random intervals to fixed or random peers.
Co-authored-by: Joseph McGee
In support of dynamic validator list, this changeset:
1. Adds a new `validator_list_expires` field to `server_info` that
indicates when the current validator list will become stale.
2. Adds a new admin only `validator_lists` RPC that returns the
current list of known validators and the most recent published validator
lists.
3. Adds a new admin only `validator_sites` RPC that returns the list of
configured validator publisher sites and when they were most recently
queried.
Removes unnecessary common link libs related to openssl, which we link
to explicitly using finder vars now. THis allows the generated XCode
project to link without error. Tested with CMake 3.9.0 and XCode 8.3.3.
if openssl is configured with compression support AND you link
to the static lib, you are going to need to link to zlib.
Fundamentally the CMake finder should take care of this (as
described in https://gitlab.kitware.com/cmake/cmake/issues/16885),
but we work around it here by adding zlib explicitly. Update
beast error test for OpenSSL 1.1.0
This commit introduces the "SortedDirectories" amendment, which
addresses two distinct issues:
First, it corrects a technical flaw that could, in some edge cases,
prevent an empty intermediate page from being deleted.
Second, it sorts directory entries within a page (other than order
book page entries, which remain strictly FIFO). This makes insert
operations deterministic, instead of pseudo-random and reliant on
temporal ordering.
Lastly, it removes the ability to perform a "soft delete" where
the page number of the item to delete need not be known if the
item is in the first 20 pages, and enforces a maximum limit to
the number of pages that a directory can span.
The two active users of DeadlineTimer, NetworkOPs and Application,
now use asio::steady_timers rather than DeadlineTimer.
DeadlineTimer is removed since it is no longer used.
To assure that all in-flight closures on timers are done before
Stoppables call stopped(), the JobCounter is made more generic.
It's now a ClosureCounter. The ClosureCounter is currently used
to count closures in flight for the JobQueue, NetworkOPs, and the
Application.
If the JobQueue is used during shutdown then those Jobs may access
Stoppables after they have already stopped. This violates the
preconditions of Stoppables and may lead to undefined behavior.
The solution taken here is to reference count all Jobs in the
JobQueue. At stop time all Jobs already in the JobQueue are
allowed to run to completion, but no further Jobs are allowed
into the JobQueue.
If a Job is rejected from the JobQueue (because we are stopping),
then JobQueue::addJob() returns false, so the caller can make any
necessary adjustments.
Check and modify amendment blocked status with each new ledger (provided
by @wilsonianb). Honor blocked status in certain RPC commands and when
deciding whether to propose/validate.
Fixes: RIPD-1479
Fixes: RIPD-1447
Release Notes
-------------
This resolves an issue whereby an amendment blocked server would still
serve some RPC requests that are unreliable in blocked state and would
continue to publish validations.
Introduces a generic Validations class for storing and querying current and
recent validations. Aditionally migrates the validation related timing
constants from LedgerTiming to the new Validations code.
Introduces RCLValidations as the version of Validations adapted for use in the
RCL. This adds support for flushing/writing validations to the sqlite log and
also manages concurrent access to the Validations data.
RCLValidations::flush() no longer uses the JobQueue for its database
write at shutdown. It performs the write directly without
changing threads.
Replace Taker.cpp with calls to the payment flow() code.
This change required a number of tweaks in the payment flow code.
These tweaks are conditionalized on whether or not offer crossing
is taking place. The flag is explicitly passed as a parameter to
the flow code.
For testing, a class was added that identifies differences in the
contents of two PaymentSandboxes. That code may be reusable in
the future.
None of the Taker offer crossing code is removed. Both versions
of the code are co-resident to support an amendment cut-over.
The code that identifies differences between Taker and Flow offer
crossing is enabled by a feature. That makes it easy to enable
or disable difference logging by changing the config file. This
approach models what was done with the payment flow code. The
differencing code should never be enabled on a production server.
Extensive offer crossing unit tests are added to examine and
verify the behavior of corner cases. The tests are currently
configured to run against both Taker and Flow offer crossing.
This gives us confidence that most cases run identically and
some of the (few) differences in behavior are documented.
6d5547a Set version to 1.0.0-b34
6fab138 Fix and tidy up CMake build scripts:
ccefa54 Set version to 1.0.0-b33
32afe41 Set internal state correctly when writing frames:
fe3e20b Add write_frames unit test
578dcd0 Add decorator unit test
aaa3733 Use fwrite return value in file_body
df66165 Require Visual Studio 2015 Update 3 or later
b8e5a21 Set version to 1.0.0-b32
ffb1758 Update CMake scripts for finding packages:
b893749 Remove http Writer suspend and resume feature (API Change):
27864fb Add io_service completion invariants tests
eba05a7 Set version to 1.0.0-b31
484bcef Fix badge markdown in README.md
5663bea Add missing dynabuf_readstream member
0d7a551 Tidy up build settings
0fd4030 Move the handler, don't copy it
git-subtree-dir: src/beast
git-subtree-split: 6d5547a32c50ec95832c4779311502555ab0ee1f
Add new functionality to enforce one or more sanity checks (invariants)
on transactions. Add tests for each new invariant check. Allow
for easily adding additional invariant checks in the future.
Also Resolves
-------------
- RIPD-1426
- RIPD-1427
- RIPD-1428
- RIPD-1429
- RIPD-1430
- RIPD-1431
- RIPD-1432
Release Notes
-------------
Creates a new ammendment named "EnforceInvariants" which must be
enabled in order for these new checks to run on each transaction.
