* Fix: Don't flag consensus as stalled prematurely (#5658)
Fix stalled consensus detection to prevent false positives in situations where there are no disputed transactions.
Stalled consensus detection was added to 2.5.0 in response to a network consensus halt that caused a round to run for over an hour. However, it has a flaw that makes it very easy to have false positives. Those false positives are usually mitigated by other checks that prevent them from having an effect, but there have been several instances of validators "running ahead" because there are circumstances where the other checks are "successful", allowing the stall state to be checked.
* Set version to 2.5.1
* fix: Skip processing transaction batch if the batch is empty (#5670)
Avoids an assertion failure in NetworkOPsImp::apply in the unlikely event that all incoming transactions are invalid.
* Fix: EscrowTokenV1 (#5571)
* resolves an accounting inconsistency in MPT escrows where transfer fees were not properly handled when unlocking escrowed tokens.
* refactor: Wrap GitHub CI conditionals in curly braces (#5796)
This change wraps all GitHub conditionals in `${{ .. }}`, both for consistency and to reduce unexpected failures, because it was previously noticed that not all conditionals work without those curly braces.
* Only notify clio for PRs targeting the release and master branches (#5794)
Clio should only be notified when releases are about to be made, instead of for all PR, so this change only notifies Clio when a PR targets the release or master branch.
* Support DynamicMPT XLS-94d (#5705)
* extends the functionality of the MPTokenIssuanceSet transaction, allowing the issuer to update fields or flags that were explicitly marked as mutable during creation.
* Bugfix: Adds graceful peer disconnection (#5669)
The XRPL establishes connections in three stages: first a TCP connection, then a TLS/SSL handshake to secure the connection, and finally an upgrade to the bespoke XRP Ledger peer-to-peer protocol. During connection termination, xrpld directly closes the TCP connection, bypassing the TLS/SSL shutdown handshake. This makes peer disconnection diagnostics more difficult - abrupt TCP termination appears as if the peer crashed rather than disconnected gracefully.
This change refactors the connection lifecycle with the following changes:
- Enhanced outgoing connection logic with granular timeouts for each connection stage (TCP, TLS, XRPL handshake) to improve diagnostic capabilities
- Updated both PeerImp and ConnectAttempt to use proper asynchronous TLS shutdown procedures for graceful connection termination
* Downgrade to boost 1.83
* Set version to 2.6.1-rc1
* chore: Use self hosted windows runners (#5780)
This changes switches from the GitHub-managed Windows runners to self-hosted runners to significantly reduce build time.
* Rename mutable flags (#5797)
This is a minor change on top of #5705
* fix(amendment): Add missing fields for keylets to ledger objects (#5646)
This change adds a fix amendment (`fixIncludeKeyletFields`) that adds:
* `sfSequence` to `Escrow` and `PayChannel`
* `sfOwner` to `SignerList`
* `sfOracleDocumentID` to `Oracle`
This ensures that all ledger entries hold all the information needed to determine their keylet.
* chore: Limits CI build and test parallelism to reduce resource contention (#5799)
GitHub runners have a limit on how many concurrent jobs they can actually process (even though they will try to run them all at the same time), and similarly the Conan remote cannot handle hundreds of concurrent requests. Previously, the Conan dependency uploading was already limited to max 10 jobs running in parallel, and this change makes the same change to the build+test workflow.
* chore: Build and test all configs for daily scheduled run (#5801)
This change re-enables building and testing all configurations, but only for the daily scheduled run. Previously all configurations were run for each merge into the develop branch, but that overwhelmed both the GitHub runners and the Conan remote, and thus they were limited to just a subset of configurations. Now that the number of jobs is limited via `max-parallel: 10`, we should be able to safely enable building all configurations again. However, building them all once a day instead of for each PR merge should be sufficient.
* chore: Add unit tests dir to code coverage excludes (#5803)
This change excludes unit test code from code coverage reporting.
* refactor: Modularise ledger (#5493)
This change moves the ledger code to libxrpl.
* Mark PermissionDelegation as unsupported
* Set version to 2.6.1-rc2
* Miscellaneous refactors and updates (#5590)
- Added a new Invariant: `ValidPseudoAccounts` which checks that all pseudo-accounts behave consistently through creation and updates, and that no "real" accounts look like pseudo-accounts (which means they don't have a 0 sequence).
- `to_short_string(base_uint)`. Like `to_string`, but only returns the first 8 characters. (Similar to how a git commit ID can be abbreviated.) Used as a wrapped sink to prefix most transaction-related messages. More can be added later.
- `XRPL_ASSERT_PARTS`. Convenience wrapper for `XRPL_ASSERT`, which takes the `function` and `description` as separate parameters.
- `SField::sMD_PseudoAccount`. Metadata option for `SField` definitions to indicate that the field, if set in an `AccountRoot` indicates that account is a pseudo-account. Removes the need for hard-coded field lists all over the place. Added the flag to `AMMID` and `VaultID`.
- Added functionality to `SField` ctor to detect both code and name collisions using asserts. And require all SFields to have a name
- Convenience type aliases `STLedgerEntry::const_pointer` and `STLedgerEntry::const_ref`. (`SLE` is an alias to `STLedgerEntry`.)
- Generalized `feeunit.h` (`TaggedFee`) into `unit.h` (`ValueUnit`) and added new "BIPS"-related tags for future use. Also refactored the type restrictions to use Concepts.
- Restructured `transactions.macro` to do two big things
1. Include the `#include` directives for transactor header files directly in the macro file. Removes the need to update `applySteps.cpp` and the resulting conflicts.
2. Added a `privileges` parameter to the `TRANSACTION` macro, which specifies some of the operations a transaction is allowed to do. These `privileges` are enforced by invariant checks. Again, removed the need to update scattered lists of transaction types in various checks.
- Unit tests:
1. Moved more helper functions into `TestHelpers.h` and `.cpp`.
2. Cleaned up the namespaces to prevent / mitigate random collisions and ambiguous symbols, particularly in unity builds.
3. Generalized `Env::balance` to add support for `MPTIssue` and `Asset`.
4. Added a set of helper classes to simplify `Env` transaction parameter classes: `JTxField`, `JTxFieldWrapper`, and a bunch of classes derived or aliased from it. For an example of how awesome it is, check the changes `src/test/jtx/escrow.h` for how much simpler the definitions are for `finish_time`, `cancel_time`, `condition`, and `fulfillment`.
5. Generalized several of the amount-related helper classes to understand `Asset`s.
6. `env.balance` for an MPT issuer will return a negative number (or 0) for consistency with IOUs.
* refactor: Simplify STParsedJSON with some helper functions (#5591)
- Add code coverage for STParsedJSON edge cases
Co-authored-by: Denis Angell <dangell@transia.co>
* test: Add STInteger and STParsedJSON tests (#5726)
This change is to improve code coverage (and to simplify #5720 and #5725); there is otherwise no change in functionality. The change adds basic tests for `STInteger` and `STParsedJSON`, so it becomes easier to test smaller changes to the types, as well as removes `STParsedJSONArray`, since it is not used anywhere (including in Clio).
* Revert "Update Conan dependencies: OpenSSL" (#5807)
This change reverts #5617, because it will require extensive testing that will take up more time than we have before the next scheduled release.
Reverting this change does not mean we are abandoning it. We aim to pick it back up once there's a sufficient time window to allow for testing on multiple distros running a mixture of OpenSSL 1.x and 3.x.
* docs: Add warning about using std::counting_semaphore (#5595)
This adds a comment to avoid using `std::counting_semaphore` until the minimum compiler versions of GCC and Clang have been updated to no longer contain the bug that is present in older compilers.
* Improve ValidatorList invalid UNL manifest logging (#5804)
This change raises logging severity from `INFO` to `WARN` when handling UNL manifest signed with an unexpected / invalid key. It also changes the internal error code for an invalid format of UNL manifest to `invalid` (from `untrusted`).
This is a follow up to problems experienced by an UNL node due to old manifest key configured in `validators.txt`, which would be easier to diagnose with improved logging.
It also replaces a log line with `UNREACHABLE` for an impossible situation when we match UNL manifest key against a configured key which has an invalid type (we cannot configure such a key because of checks when loading configured keys).
* chore: Pin all CI Docker tags (#5813)
To avoid surprises and ensure reproducibility, this change pins all CI Docker image tags to the latest version in the XRPLF/CI repo.
* change `fixPriceOracleOrder` to `Supported::yes` (#5749)
* fix: Address http header case sensitivity (#5767)
This change makes the regex in `HttpClient.cpp` that matches the content-length http header case insensitive to improve compatibility, as http headers are case insensitive.
* test: add more comprehensive tests for `FeeVote` (#5746)
This change adds more comprehensive tests for the `FeeVote` module, which previously only checked the basics, and not the more comprehensive flows in that class.
* ci: Call all reusable workflows reusable (#5818)
* Add `STInt32` as a new `SType` (#5788)
This change adds `STInt32` as a new `SType` under the `STInteger` umbrella, with `SType` value `12`. This is the first and only `STInteger` type that supports negative values.
* switch `fixIncludeKeyletFields` to `Supported::yes` (#5819)
* refactor: Restructure Transactor::preflight to reduce boilerplate (#5592)
* Restructures `Transactor::preflight` to create several functions that will remove the need for error-prone boilerplate code in derived classes' implementations of `preflight`.
* refactor: Add support for extra transaction signatures (#5594)
* Restructures Transactor signature checking code to be able to handle a `sigObject`, which may be the full transaction, or may be an object field containing a separate signature. Either way, the `sigObject` can be a single- or multi-sign signature.
* ci: Upload artifacts during build and test in a separate job (#5817)
* chore: Set free-form CI inputs as env vars (#5822)
This change moves CI values that could be user-provided into environment variables.
* Rename flags for DynamicMPT (#5820)
* Set version to 2.6.1
* fix: FD/handle guarding + exponential backoff (#5823)
* fix: Transaction sig checking functions do not get a full context (#5829)
Fixes a (currently harmless) bug introduced by PR #5594
* Remove bogus coverage warning (#5838)
* fix return type
---------
Co-authored-by: Ed Hennis <ed@ripple.com>
Co-authored-by: Jingchen <a1q123456@users.noreply.github.com>
Co-authored-by: Denis Angell <dangell@transia.co>
Co-authored-by: Bart <bthomee@users.noreply.github.com>
Co-authored-by: yinyiqian1 <yqian@ripple.com>
Co-authored-by: Vito Tumas <5780819+Tapanito@users.noreply.github.com>
Co-authored-by: Bronek Kozicki <brok@incorrekt.com>
Co-authored-by: Mayukha Vadari <mvadari@ripple.com>
Co-authored-by: Valentin Balaschenko <13349202+vlntb@users.noreply.github.com>
Co-authored-by: tequ <git@tequ.dev>
Co-authored-by: Ayaz Salikhov <mathbunnyru@users.noreply.github.com>
- Amendment: fixDelegateV1_1
- In DelegateSet, disallow invalid PermissionValues like 0, and transaction values when the transaction's amendment is not enabled. Acts as if the transaction doesn't exist, which is the same thing older versions without the amendment will do.
- Payment burn/mint should disallow DEX currency exchange.
- Support MPT for Payment burn/mint.
* Add and Scale to VaultCreate
* Add round-trip calculation to VaultDeposit VaultWithdraw and VaultClawback
* Implement Number::truncate() for VaultClawback
* Add rounding to DepositWithdraw
* Disallow zero shares withdraw or deposit with tecPRECISION_LOSS
* Return tecPATH_DRY on overflow when converting shares/assets
* Remove empty shares MPToken in clawback or withdraw (except for vault owner)
* Implicitly create shares MPToken for vault owner in VaultCreate
* Review feedback: defensive checks in shares/assets calculations
---------
Co-authored-by: Ed Hennis <ed@ripple.com>
This is a major refactor of LedgerEntry.cpp. It adds a number of helper functions to make the code easier to maintain.
It also splits up the ledger and ledger_entry tests into different files, and cleans up the ledger_entry tests to make them easier to write and maintain.
This refactor also caught a few bugs in some of the other RPC processing, so those are fixed along the way.
This is a follow-up to PR #5664 that further improves the specificity of logging for refused peer connections. The previous changes did not account for several key scenarios, leading to potentially misleading log messages.
It addresses the following
- Inbound Disabled: Connections are now explicitly logged as rejected when the server is not configured to accept inbound peers. Previously, this was logged as the server being "full," which was technically correct but lacked diagnostic clarity.
- Duplicate Connections: The logging now distinguishes between two types of duplicate connection refusals:
- When a peer with the same node public key is already connected (duplicate connection).
- When a connection is rejected because the limit for connections from a single IP address has been reached.
These changes provide more accurate and actionable diagnostic information when analyzing peer connection behavior.
This updates Boost to 1.88, which is needed because Clio wants to move to 1.88 as that fixes several ASAN false positives around coroutine usage. In order for Clio to move to newer boost, libXRPL needs to move too. Hence the changes in this PR. A lot has changed between 1.83 and 1.88 so there are lots of changes in the diff, especially in regards to Boost.Asio and coroutines in particular.
Reduce log noise by changing two log statements from error/warn level to debug level. These logs occur during normal operation when AMM offers are not available or when IOU authorization checks fail, which are expected scenarios that don't require an elevated log level.
Currently, all peer connection rejections are logged with the reason "slots full". This is inaccurate, as the PeerFinder can also reject connections if they are a duplicate. This change updates the logging logic to correctly report the specific reason (full or duplicate) for a rejected peer connection, providing more accurate diagnostic information.
This change fixes the suite names all around the test files, to make them match to the folder name in which this test files are located. Also, the RCL test files are relocated to the consensus folder, because they are testing consensus functionality.
We're currently calling `XXH3_createState` and `XXH3_freeState` when hashing an object. However, it may be slow because they call `malloc` and `free`, which may affect the performance. This change avoids the use of the streaming API as much as possible by using an internal buffer.
Fix stalled consensus detection to prevent false positives in situations where there are no disputed transactions.
Stalled consensus detection was added to 2.5.0 in response to a network consensus halt that caused a round to run for over an hour. However, it has a flaw that makes it very easy to have false positives. Those false positives are usually mitigated by other checks that prevent them from having an effect, but there have been several instances of validators "running ahead" because there are circumstances where the other checks are "successful", allowing the stall state to be checked.
This change introduces two key optimizations:
* Mutex scope reduction: Limits the lock to individual partitions within `TaggedCache`, reducing contention.
* Decoupling: Removes the tight coupling between `LedgerHistory` and `TaggedCache`, improving modularity and testability.
Lock contention analysis based on eBPF showed significant improvements as a result of this change.
This change fixes an issue where the order of `PriceDataSeries` was out of sync between when `PriceOracle` was created and when it was updated. Although they are registered in the canonical order when updated, they are created using the order specified in the transaction; this change ensures that they are also registered in the canonical order when created.
This change decouples `ledger` from `xrpld/app`, and therefore fully clears the path to the modularisation of the ledger component. Before this change, `View.cpp` relied on `MPTokenAuthorize::authorize; this change moves `MPTokenAuthorize::authorize` to `View.cpp` to invert the dependency, making ledger a standalone module.
The Payment transaction metadata is missing the `DeliveredAmount` field that displays the actual amount delivered to the destination excluding transfer fees. This amendment fixes this problem.
#5224 added (among other things) a `VaultWithdraw` transaction that allows setting the recipient of the withdrawn funds in the `Destination` transaction field. This technically turns this transaction into a payment, and in some respect the implementation does follow payment rules, e.g. enforcement of `lsfRequireDestTag` or `lsfDepositAuth`, or that MPT transfer has destination `MPToken`. However for IOUs, it missed verification that the destination account has a trust line to the asset issuer. Since the default behavior of `accountSendIOU` is to create this trust line (if missing), this is what `VaultWithdraw` currently does. This is incorrect, since the `Destination` might not be interested in holding the asset in question; this basically enables spammy transfers. This change, therefore, removes automatic creation of a trust line to the `Destination` account in `VaultWithdraw`.
This change includes `network_id` data in the validations and ledger subscription stream responses, as well as unit tests to validate the response fields. Fixes#4783
This change adds support for `DomainID` to existing transactions `MPTokenIssuanceCreate` and `MPTokenIssuanceSet`.
In #5224 `DomainID` was added as an access control mechanism for `SingleAssetVault`. The actual implementation of this feature lies in `MPToken` and `MPTokenIssuance`, hence it makes sense to enable the use of `DomainID` also in `MPTokenIssuanceCreate` and `MPTokenIssuanceSet`, following same rules as in Vault:
* `MPTokenIssuanceCreate` and `MPTokenIssuanceSet` can only set `DomainID` if flag `MPTRequireAuth` is set.
* `MPTokenIssuanceCreate` requires that `DomainID` be a non-zero, uint256 number.
* `MPTokenIssuanceSet` allows `DomainID` to be zero (or empty) in which case it will remove `DomainID` from the `MPTokenIssuance` object.
The change is amendment-gated by `SingleAssetVault`. This is a non-breaking change because `SingleAssetVault` amendment is `Supported::no`, i.e. at this moment considered a work in progress, which cannot be enabled on the network.
