nudb_bytes was documented as a NuDB file size, one place even claiming a
filesystem stat. It observes Database::getStoreSize(), which sums the object
payloads this process has written. It excludes NuDB's keys, bucket padding and
log, and resets with the process. node_written_bytes calls the same accessor, so
the two series are equal by construction and a write-amplification ratio built
from them is a constant 1.0. Neither Backend nor Database exposes a file-size
accessor, so nothing reports on-disk size today.
The Ledger Data & Sync panel plotting node_reads_hit / node_reads_total was
titled "NuDB Cache Hit Ratio" and described as reads served from cache.
fetchHitCount_ increments whenever a fetch returned an object, whatever served
it, so the ratio is a found rate. It reads near 100% while every fetch goes to
disk, which made the cold-read failure mode look impossible. Renamed to
"NuDB Read Found Ratio" and rewrote the guidance to pair it with read latency.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Resolved OpenTelemetryPlan/09-data-collection-reference.md: this branch
replaced the StatsD-shaped Section 2 with OTel-native naming, so the
incoming StatsD tables and the StatsD per-job timer section do not apply
here. Kept this branch's names throughout.
The incoming per-job-type saturation gauge section is new content and is
retained, renumbered to 2.5 and rewritten for the OTel naming: bare
lowercase `jobq_<jobtype>_{waiting,running,deferred}` derived through
OTelCollector rather than the case-preserving `xrpld_`-prefixed StatsD
form.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Add reference entries for the observability surface introduced on
phase-9: the `handler` label on the job instruments, the five
`getobject_*` request metrics, and the per-job-type queue saturation
gauges.
Names here follow this branch's StatsD pipeline, which preserves case
and carries the `xrpld_` prefix, so they differ from the lowercased
OTel-native names used from phase-7 onward. The sections state where
the implementing code lives, since it is introduced downstream.
Also correct pre-existing entries: `job_count` exports as
`jobq_job_count` via the collector group prefix, the non-special job
type count is 35 (not 36), and `JtLedgerData` has five producers.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Document the two new ledger-correlation attributes in the data-collection
reference: add them to the transaction and TxQ attribute tables (with per-span
coverage), update the attribute count, and correct the txq.enqueue parent note
(parents to tx.process on the submission path via explicit context; a root on
the open-ledger rebuild path, correlated via current_ledger_seq).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Brings coroutine-aware context storage + tx/consensus worker-body activation.
Resolved: Telemetry.cpp keeps both meterProvider_ (phase-7) and contextStorage_
(coro-aware); doc-09 keeps phase-7 structure and applies the pathfind.request →
rpc.command.<name> correction to phase-7's own PathFind section.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Reflects the C1 fix: rpc.command.* stays unscoped (its dispatch wraps
doRipplePathFind which yields), so pathfind.request nests under rpc.process.
The request -> compute -> discover sub-tree nests correctly via ScopedSpanGuard.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Document that deterministic-trace_id spans (tx.* apply pipeline, tx.process,
tx.receive, consensus.round) are now genuine trace roots with empty
parent_span_id via the custom DeterministicIdGenerator, superseding the old
synthetic-parent behavior that showed 'root span not yet received' in Tempo.
Also update the fresh-root note: peer entry spans use ScopedSpanGuard::freshRoot().
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
These inbound peer-message entry points (kConsumer) used span(), which
inherits whatever span is active on the peer thread — including a leaked
tx.receive scope — so validations/proposals were wrongly nested under
unrelated transaction traces. rootSpan() starts a fresh trace root.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Both spans are moved into job-queue lambdas and destroyed on a worker
thread. Detaching on the origin thread pops the thread-local OTel Scope
there, so later spans on the peer/RPC thread no longer inherit these as a
leaked ambient parent. Trace_id/parent are unchanged (both are hashSpan).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The spanmetrics connector had no namespace, so it emitted traces_span_metrics_*
metric names by default. The span dashboards and docs are renamed to query
span_* names; this is only correct if the connector emits them too, so add
namespace: "span" to the spanmetrics connector. Both sides change together:
renaming the dashboards without the namespace (or vice versa) would break the
pipeline. Matches the phase9 collector config.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The phase7 OTelCollector::formatName lowercases and strips names, emitting
snake_case metrics with no xrpld_ prefix. The native Grafana dashboards and
the telemetry docs still queried the old xrpld_CamelCase names, so they were
broken against their own pipeline. Rename every metric name to match what the
code emits: drop the xrpld_ prefix and lowercase the remainder. The two job
histograms also drop the redundant 'duration' word (job_queued_us,
job_running_us) to match the phase9 forms. Add havetxset to the cspell
dictionary since the lowercased metric name no longer word-splits.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The collector's log ingestion used a container path named after the old
`rippled` binary and defaulted its host mount to a location that either
needed root or diverged from where the telemetry configs actually write.
Consolidate on one accessible log root:
- container mount target renamed /var/log/rippled -> /var/log/xrpld
- filelog glob -> /var/log/xrpld/*/debug.log
- compose mount source defaults to the repo-relative ./data/logs
(user-owned, no root), overridable via XRPLD_LOG_DIR
- devnet telemetry cfg writes to data/logs/devnet/debug.log so it lands
one subdir below the mount root and matches the glob
- integration-test.sh sets XRPLD_LOG_DIR to its own workdir
- docs/runbook/task-list updated to match
The default xrpld config (cfg/xrpld-example.cfg) is intentionally left
untouched.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Correct log-timestamp examples to real Logs::format() output
(2024-Jan-15 10:30:45.123456 UTC) in docs, TESTING.md, and reference.
- Update Loki to v3.4.2 and switch the collector exporter to
otlphttp/loki on the native /otlp endpoint (docs + task list).
- Make the collector log-mount path configurable via XRPLD_LOG_DIR.
- Remove implementation-phase references from shipped config/script
comments, keeping the functional descriptions.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Move the standalone External Dashboard Parity design spec out of
docs/superpowers/ (which the project guidelines say not to create) and into
an appendix of OpenTelemetryPlan/06-implementation-phases.md, so the phase
plan is self-contained. Repoint the 10 "Source" links in the phase 3/4/7
task lists to the new appendix anchor.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Add PathFinding Spans section to the runbook Span Reference and
remove the incorrect "not emitted / later-phase" annotations:
pathfind.request/compute/discover/update_all are emitted since
Phase 2 (upstream of Phase 5).
- Runbook label names use the bare spanmetrics dimensions
(command, rpc_status, local, consensus_mode); fix stale docs.
- 05-configuration-reference: note tls_client_cert/key require use_tls=1.
- TelemetryConfig: reject mTLS cert paths when use_tls=0 so telemetry
is not silently sent in plaintext.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
