* Fix AMM offer rounding and low quality LOB offer blocking AMM:
A single-path AMM offer with account offer on DEX, is always generated
starting with the takerPays first, which is rounded up, and then
the takerGets, which is rounded down. This rounding ensures that the pool's
product invariant is maintained. However, when one of the offer's side
is XRP, this rounding can result in the AMM offer having a lower
quality, potentially causing offer generation to fail if the quality
is lower than the account's offer quality.
To address this issue, the proposed fix adjusts the offer generation process
to start with the XRP side first and always rounds it down. This results
in a smaller offer size, improving the offer's quality. Regardless if the offer
has XRP or not, the rounding is done so that the offer size is minimized.
This change still ensures the product invariant, as the other generated
side is the exact result of the swap-in or swap-out equations.
If a liquidity can be provided by both AMM and LOB offer on offer crossing
then AMM offer is generated so that it matches LOB offer quality. If LOB
offer quality is less than limit quality then generated AMM offer quality
is also less than limit quality and the offer doesn't cross. To address
this issue, if LOB quality is better than limit quality then use LOB
quality to generate AMM offer. Otherwise, don't use the quality to generate
AMM offer. In this case, limitOut() function in StrandFlow limits
the out amount to match strand's quality to limit quality and consume
maximum AMM liquidity.
The AMM has an invariant for swaps where:
new_balance_1*new_balance_2 >= old_balance_1*old_balance_2
Due to rounding, this invariant could sometimes be violated (although by
very small amounts).
This patch introduces an amendment `fixAMMRounding` that changes the
rounding to always favor the AMM. Doing this should maintain the
invariant.
Co-authored-by: Bronek Kozicki
Co-authored-by: thejohnfreeman
This amendment, `fixPreviousTxnID`, adds `PreviousTxnID` and
`PreviousTxnLgrSequence` as fields to all ledger objects that did
not already have them included (`DirectoryNode`, `Amendments`,
`FeeSettings`, `NegativeUNL`, and `AMM`). This makes it much easier
to go through the history of these ledger objects.
This fixes a case where a peer can desync under a certain timing
circumstance--if it reaches a certain point in consensus before it receives
proposals.
This was noticed under high transaction volumes. Namely, when we arrive at the
point of deciding whether consensus is reached after minimum establish phase
duration but before having received any proposals. This could be caused by
finishing the previous round slightly faster and/or having some delay in
receiving proposals. Existing behavior arrives at consensus immediately after
the minimum establish duration with no proposals. This causes us to desync
because we then close a non-validated ledger. The change in this PR causes us to
wait for a configured threshold before making the decision to arrive at
consensus with no proposals. This allows validators to catch up and for brief
delays in receiving proposals to be absorbed. There should be no drawback since,
with no proposals coming in, we needn't be in a huge rush to jump ahead.
We do not currently enforce that incoming peer connection does not have
remote_endpoint which is already used (either by incoming or outgoing
connection), hence already stored in slots_. If we happen to receive a
connection from such a duplicate remote_endpoint, it will eventually result in a
crash (when disconnecting) or weird behavior (when updating slot state), as a
result of an apparently matching remote_endpoint in slots_ being used by a
different connection.
This amendment fixes an edge case where an empty DID object can be
created. It adds an additional check to ensure that DIDs are
non-empty when created, and returns a `tecEMPTY_DID` error if the DID
would be empty.
* telENV_RPC_FAILED is a new code, reserved exclusively
for unit tests when RPC fails. This will
make those types of errors distinct and easier to test
for when expected and/or diagnose when not.
* Output RPC command result when result is not expected.
This algorithm is about an order of magnitude faster than the existing
algorithm (about 10x faster for encoding and about 15x faster for
decoding - including the double hash for the checksum). The algorithms
use gcc's int128 (fast MS version will have to wait, in the meantime MS
falls back to the slow code).
* It is now an invariant that all constructed Public Keys are valid,
non-empty and contain 33 bytes of data.
* Additionally, the memory footprint of the PublicKey class is reduced.
The size_ data member is declared as static.
* Distinguish and identify the PublisherList retrieved from the local
config file, versus the ones obtained from other validators.
* Fixes#2942
The compilation fails due to an issue in the initializer list
of an optional argument, which holds a vector of pairs.
The code compiles correctly on earlier gcc versions, but fails on gcc 13.
Implement native support for Price Oracles.
A Price Oracle is used to bring real-world data, such as market prices,
onto the blockchain, enabling dApps to access and utilize information
that resides outside the blockchain.
Add Price Oracle functionality:
- OracleSet: create or update the Oracle object
- OracleDelete: delete the Oracle object
To support this functionality add:
- New RPC method, `get_aggregate_price`, to calculate aggregate price for a token pair of the specified oracles
- `ltOracle` object
The `ltOracle` object maintains:
- Oracle Owner's account
- Oracle's metadata
- Up to ten token pairs with the scaled price
- The last update time the token pairs were updated
Add Oracle unit-tests
* Commit 01c37fe introduced a change to the STTx unit test where a local
"defaultRules" object was created with a temporary inline "presets"
value provided to the ctor. Rules::Impl stores a const ref to the
presets provided to the ctor. This particular call provided an inline
temp variable, which goes out of scope as soon as the object is
created. On Windows, attempting to use the presets (e.g. via the
enabled() function) causes an access violation, which crashes the test
run.
* An audit of the code indicates that all other instances of Rules use
the Application's config.features list, which will have a sufficient
lifetime.
Add `STObject` constructor to explicitly set the inner object template.
This allows certain AMM transactions to apply in the same ledger:
There is no issue if the trading fee is greater than or equal to 0.01%.
If the trading fee is less than 0.01%, then:
- After AMM create, AMM transactions must wait for one ledger to close
(3-5 seconds).
- After one ledger is validated, all AMM transactions succeed, as
appropriate, except for AMMVote.
- The first AMMVote which votes for a 0 trading fee in a ledger will
succeed. Subsequent AMMVote transactions which vote for a 0 trading
fee will wait for the next ledger (3-5 seconds). This behavior repeats
for each ledger.
This has no effect on the ultimate correctness of AMM. This amendment
will allow the transactions described above to succeed as expected, even
if the trading fee is 0 and the transactions are applied within one
ledger (block).
Prior to this commit, `port_grpc` could not be added to the [server]
stanza. Instead of validating gRPC IP/Port/Protocol information in
ServerHandler, validate grpc port info in GRPCServer constructor. This
should not break backwards compatibility.
gRPC-related config info must be in a section (stanza) called
[port_gprc].
* Close#4015 - That was an alternate solution. It was decided that with
relaxed validation, it is not necessary to rename port_grpc.
* Fix#4557
Without this amendment, an NFTokenAcceptOffer transaction can succeed
even when the NFToken recipient does not have sufficient reserves for
the new NFTokenPage. This allowed accounts to accept NFT sell offers
without having a sufficient reserve. (However, there was no issue in
brokered mode or when a buy offer is involved.)
Instead, the transaction should fail with `tecINSUFFICIENT_RESERVE` as
appropriate. The `fixNFTokenReserve` amendment adds checks in the
NFTokenAcceptOffer transactor to check if the OwnerCount changed. If it
did, then it checks the new reserve requirement.
Fix#4679
* Add logging for Application.cpp sweep()
* Improve lifetime management of ledger objects (`SLE`s)
* Only store SLE digest in CachedView; get SLEs from CachedSLEs
* Also force release of last ledger used for path finding if there are
no path finding requests to process
* Count more ST objects (derive from `CountedObject`)
* Track CachedView stats in CountedObjects
* Rename the CachedView counters
* Fix the scope of the digest lookup lock
Before this patch, if you asked "is it caching?" It was always caching.
This reverts commit 002893f280.
There were two files with conflicts in the automated revert:
- src/ripple/rpc/impl/RPCHelpers.h and
- src/test/rpc/JSONRPC_test.cpp
Those files were manually resolved.
* Revert "Optimize calculation of close time to avoid impasse and minimize gratuitous proposal changes (#4760)"
This reverts commit 8ce85a9750.
* Revert "Several changes to improve Consensus stability: (#4505)"
This reverts commit f259cc1ab6.
* Add missing include
---------
Co-authored-by: seelabs <scott.determan@yahoo.com>
* Promote API version 2 to supported
* Switch command line to API version 1
* Fix LedgerRequestRPC test
* Remove obsolete tx_account method
This method is not implemented, the only parts which are removed are related to command-line parsing
* Fix RPCCall test
* Reduce diff size, small test improvements
* Minor fixes
* Support for the mold linker
* [fold] handle case where both mold and gold are installed
* [fold] Use first non-default linker
* Fix TransactionEntry_test
* Fix AccountTx_test
---------
Co-authored-by: seelabs <scott.determan@yahoo.com>
* Remove include <ranges>
* Formatting fix
* Output for subscriptions
* Output from sign, submit etc.
* Output from ledger
* Output from account_tx
* Output from transaction_entry
* Output from tx
* Store close_time_iso in API v2 output
* Add small APIv2 unit test for subscribe
* Add unit test for transaction_entry
* Add unit test for tx
* Remove inLedger from API version 2
* Set ledger_hash and ledger_index
* Move isValidated from RPCHelpers to LedgerMaster
* Store closeTime in LedgerFill
* Time formatting fix
* additional tests for Subscribe unit tests
* Improved comments
* Rename mInLedger to mLedgerIndex
* Minor fixes
* Set ledger_hash on closed ledger, even if not validated
* Update API-CHANGELOG.md
* Add ledger_hash, ledger_index to transaction_entry
* Fix validated and close_time_iso in account_tx
* Fix typos
* Improve getJson for Transaction and STTx
* Minor improvements
* Replace class enum JsonOptions with struct
We may consider turning this into a general-purpose template and using it elsewhere
* simplify the extraction of transactionID from Transaction object
* Remove obsolete comments
* Unconditionally set validated in account_tx output
* Minor improvements
* Minor fixes
---------
Co-authored-by: Chenna Keshava <ckeshavabs@gmail.com>
The command line API still uses `apiMaximumSupportedVersion`.
The unit test RPCs use `apiMinimumSupportedVersion` if unspecified.
Context:
- #4568
- #4552
Introduce the `fixFillOrKill` amendment.
Fix an edge case occurring when an offer with `tfFillOrKill` set (but
without `tfSell` set) fails to cross an offer with a better rate. If
`tfFillOrKill` is set, then the owner must receive the full TakerPays.
Without this amendment, an offer fails if the entire `TakerGets` is not
spent. With this amendment, when `tfSell` is not set, the entire
`TakerGets` does not have to be spent.
For details about OfferCreate, see: https://xrpl.org/offercreate.htmlFix#4684
---------
Co-authored-by: Scott Schurr <scott@ripple.com>
Remove dependency on `<ranges>` header, since it is not implemented by
all compilers which we want to support.
This code change only affects unit tests.
Resolve https://github.com/XRPLF/rippled/issues/4787
Remove `tx_history` and `ledger_header` methods from API version 2.
Update `RPC::Handler` to allow for methods (or method implementations)
to be API version specific. This partially resolves#4727. We can now
store multiple handlers with the same name, as long as they belong to
different (non-overlapping) API versions. This necessarily impacts the
handler lookup algorithm and its complexity; however, there is no
performance loss on x86_64 architecture, and only minimal performance
loss on arm64 (around 10ns). This design change gives us extra
flexibility evolving the API in the future, including other parts of
#4727.
In API version 2, `tx_history` and `ledger_header` are no longer
recognised; if they are called, `rippled` will return error
`unknownCmd`
Resolve#3638Resolve#3539
Using the "Amount" field in Payment transactions can cause incorrect
interpretation. There continue to be problems from the use of this
field. "Amount" is rarely the correct field to use; instead,
"delivered_amount" (or "DeliveredAmount") should be used.
Rename the "Amount" field to "DeliverMax", a less misleading name. With
api_version: 2, remove the "Amount" field from Payment transactions.
- Input: "DeliverMax" in `tx_json` is an alias for "Amount"
- sign
- submit (in sign-and-submit mode)
- submit_multisigned
- sign_for
- Output: Add "DeliverMax" where transactions are provided by the API
- ledger
- tx
- tx_history
- account_tx
- transaction_entry
- subscribe (transactions stream)
- Output: Remove "Amount" from API version 2
Fix#3484Fix#3902
Add a new RPC / WS call for `server_definitions`, which returns an
SDK-compatible `definitions.json` (binary enum definitions) generated by
the server. This enables clients/libraries to dynamically work with new
fields and features, such as ones that may become available on side
chains. Clients query `server_definitions` on a node from the network
they want to work with, and immediately know how to speak that node's
binary "language", even if new features are added to it in the future
(as long as there are no new serialized types that the software doesn't
know how to serialize/deserialize).
Example:
```js
> {"command": "server_definitions"}
< {
"result": {
"FIELDS": [
[
"Generic",
{
"isSerialized": false,
"isSigningField": false,
"isVLEncoded": false,
"nth": 0,
"type": "Unknown"
}
],
[
"Invalid",
{
"isSerialized": false,
"isSigningField": false,
"isVLEncoded": false,
"nth": -1,
"type": "Unknown"
}
],
[
"ObjectEndMarker",
{
"isSerialized": false,
"isSigningField": true,
"isVLEncoded": false,
"nth": 1,
"type": "STObject"
}
],
...
```
Close#3657
---------
Co-authored-by: Richard Holland <richard.holland@starstone.co.nz>
Implement native support for W3C DIDs.
Add a new ledger object: `DID`.
Add two new transactions:
1. `DIDSet`: create or update the `DID` object.
2. `DIDDelete`: delete the `DID` object.
This meets the requirements specified in the DID v1.0 specification
currently recommended by the W3C Credentials Community Group.
The DID format for the XRP Ledger conforms to W3C DID standards.
The objects can be created and owned by any XRPL account holder.
The transactions can be integrated by any service, wallet, or application.
Context: The `DisallowIncoming` amendment provides an option to block
incoming trust lines from reaching your account. The
asfDisallowIncomingTrustline AccountSet Flag, when enabled, prevents any
incoming trust line from being created. However, it was too restrictive:
it would block an issuer from authorizing a trust line, even if the
trust line already exists. Consider:
1. Issuer sets asfRequireAuth on their account.
2. User sets asfDisallowIncomingTrustline on their account.
3. User submits tx to SetTrust to Issuer.
At this point, without `fixDisallowIncomingV1` active, the issuer would
not be able to authorize the trust line.
The `fixDisallowIncomingV1` amendment, once activated, allows an issuer
to authorize a trust line even after the user sets the
asfDisallowIncomingTrustline flag, as long as the trust line already
exists.
Modify the `XChainBridge` amendment.
Before this patch, two door accounts on the same chain could could own
the same bridge spec (of course, one would have to be the issuer and one
would have to be the locker). While this is silly, it does not violate
any bridge invariants. However, on further review, if we allow this then
the `claim` transactions would need to change. Since it's hard to see a
use case for two doors to own the same bridge, this patch disallows
it. (The transaction will return tecDUPLICATE).
Amendment "flapping" (an amendment repeatedly gaining and losing
majority) usually occurs when an amendment is on the verge of gaining
majority, and a validator not in favor of the amendment goes offline or
loses sync. This fix makes two changes:
1. The number of validators in the UNL determines the threshold required
for an amendment to gain majority.
2. The AmendmentTable keeps a record of the most recent Amendment vote
received from each trusted validator (and, with `trustChanged`, stays
up-to-date when the set of trusted validators changes). If no
validation arrives from a given validator, then the AmendmentTable
assumes that the previously-received vote has not changed.
In other words, when missing an `STValidation` from a remote validator,
each server now uses the last vote seen. There is a 24 hour timeout for
recorded validator votes.
These changes do not require an amendment because they do not impact
transaction processing, but only the threshold at which each individual
validator decides to propose an EnableAmendment pseudo-transaction.
Fix#4350
