The quorum and publish gauges were emitted but never surfaced: no panel, no
harness assertion, no reference entry. Completes those layers.
- Four panels: trusted validations against the quorum target on one axis so
a tally climbing toward quorum is visually distinct from one flat below
it; publish lag; pre-accept shortfall rate; and time to first validated
ledger.
- Both signals are asserted by the workload validator. The shortfall
counter does fire on a healthy cluster, because this node validates and
then immediately re-enters the accept gate before its peers' validations
arrive, so the first evaluation of every round tallies short. The panel
and note say so, and give the fault signature instead: the shortfall rate
outpacing the ledger-close rate while the tally stays flat and nothing
ever reaches first-validated.
- The quorum target is deliberately drawn as its own line rather than as a
headroom stat, so the disabled-quorum sentinel reads as an unreachable
target instead of an unreadable negative number.
Also removes three reference rows that were appended twice when two agents
each documented the same back-fill signals.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Registers the new gauges, renders them, asserts them and documents them, so
each signal reaches an operator rather than stopping at the emit site:
- MetricsRegistry: gauge registration for ledger_quorum_publish,
nodestore_latency, peer_ledger_supply, peerfinder_slot_census and
amendment_block, each guarded by the detached-callbacks check and
tolerant of services that are not ready yet.
- Ledger Sync Health dashboard: panels for the new signals, filtered by
the node template variable like every other board.
- Workload validation: the new series are asserted, so a signal that
regresses to absent fails CI. Signals the local cluster structurally
cannot produce, such as a replay fallback or an amendment block, are
noted rather than asserted, which would fail red on a healthy run.
- Reference, runbook and glossary entries, including the diagnosis order
for a node that has peers and validators but never validates.
- Regenerated levelization baseline: three new one-way edges from the
telemetry and test modules, no new cycles.
Also drops an unused cstddef include from the macro tests, which the
include checker rejects.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Sync-critical job types run at very low concurrency limits (ledgerRequest
and ledgerData allow 3 each), so a node can stall simply because those
jobs are held back behind other work. Nothing exposed that until now:
the existing job metrics are rates and quantiles of jobs that already
moved, or a single queue-wide depth.
- jobq_backlog{metric,job_type}: instantaneous waiting, running and
deferred counts per job type. Deferred is the starvation signal and had
no exposure anywhere; it is set when a type is at its concurrency limit.
- jobq_saturation{metric}: running tasks, worker-thread count and total
waiting, so a slowdown spanning several subsystems can be attributed to
worker-pool exhaustion instead of being diagnosed once per victim.
Both read through two new const accessors on JobQueue that take the
existing mutex once and copy integers, so a single reading is internally
consistent and no per-job cost is added. The job_type label reuses the
same JobTypes name helper the existing job counters use, so the two label
sets join.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Signals that separate a sync that is merely slow from one that will never
finish:
- sync_acquire{missing_state_nodes_max, missing_tx_nodes_max, in_flight,
received_data_depth}: how many SHAMap nodes each in-flight acquire is
still waiting for. getMissingNodes already computed this and the callers
discarded it after a trace log. A count that stays flat means the
acquire is wedged; a shrinking count means it is progressing. Recorded
once per sweep, never inside the per-node walk, and reset when a tree
completes so a finished acquire does not read as stuck forever.
- shamap_cache_hit_rate{treenode}: hit rate of the in-memory tree-node
cache, which sits above the node store, so it is distinct from the
existing NuDB ratio. A cold cache on a fresh node sends every traversal
step to disk.
- sync_acquire_no_progress_total: timer ticks where an acquire made no
progress, previously only logged.
- sync_addnode_total{good,duplicate,invalid}: whether arriving nodes are
useful, duplicated or rejected, so wasted fetch work is visible.
- sync_acquire_source_total{local,network}: whether a ledger was served
from the local store or had to be fetched.
Adds getBad()/getDuplicate() to SHAMapAddNode and an acquireProgress()
accessor on InboundLedgers so the xrpld gauge can read these without
libxrpl depending on telemetry.
ledger_seq is deliberately not a metric label: it is unbounded. Per-ledger
identity stays on the ledger.acquire span; the metrics expose bounded
aggregates instead.
The full-below cache hit rate is not exported: KeyCache updates different
counters than getHitRate() reads, so it would always report zero. That
libxrpl bug is documented rather than papered over.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Five signals that explain why a node is not advancing toward full, none of
which were observable before:
- state_changes_total now carries {from,to} mode labels, emitted at
setMode using the existing strOperatingMode helper. A bare count could
not distinguish a healthy climb from a node flapping between tracking
and connected. Removes the now-unused incrementStateChanges wrapper.
- sync_state{initial_full_duration_us}: time to first reach full, which
StateAccounting already computed but exposed only in server_info.
- sync_state{network_ledger_gate}: whether the node is still refusing to
build ledgers because it has no network ledger.
- sync_state{server_stall_seconds} and server_stall_events_total: how
long the main thread has been unresponsive. LoadManager computed this
and only logged it, so a stall was invisible until the fatal threshold.
The episode rule is a pure function so it can be tested without adding
a test-only mutator to LoadManager.
- sync_state{ledgers_behind}: how far our validated sequence trails the
best sequence any peer advertises, read from already-cached peer ranges
so no extra network traffic is added.
Also fixes the naming checker: it derived only the first label of a
multi-label instrument, so a dashboard querying the second label was
wrongly rejected.
Note: the clang-tidy hook cannot run in this worktree (no build
directory); the remaining pre-commit hooks, the naming check, dashboard
schema and harness syntax all pass.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A freshly started node most often stalls before it ever peers or reaches
quorum, and that whole chain had no telemetry. Adds the six signals that
make it observable:
- dns_resolve_total / dns_resolve_latency_ms: configured-peer hostname
resolution, emitted from OverlayImpl so libxrpl stays independent.
- overlay_connect_total / overlay_dial_latency_ms: outbound dial outcome
by terminal reason, plus dial duration.
- handshake_negotiation_fail_total: protocol and network-id negotiation
rejections, labelled by reason, so a misconfigured network is no longer
indistinguishable from unreachable peers.
- unl_fetch_total and the unl_quorum gauge: validator-list fetch outcome
per site and trusted key count against the required quorum. Without
these a bad validators.txt leaves the node syncing forever with no
signal.
- clock_close_offset_seconds: network close-time offset, which server_info
hides below 60s but which stalls consensus participation.
Panels land in the Bootstrap row of the Ledger Sync Health dashboard, the
metrics are asserted by the workload validator, and both the reference and
the runbook flow describe them.
Levelization baseline regenerated: overlay now includes MetricMacros.h, so
the overlay/telemetry pair is reported one-way instead of bidirectional.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Adds the anchors the sync-diagnostics signals attach to, with no signals
emitted yet:
- New "Ledger Sync Health" dashboard (uid ledger-sync-health) with the
standard template-variable block copied from an existing board, plus
empty "Bootstrap (Domain 0)" and "Sync pipeline" rows.
- Signal index section in the data-collection reference, an operator-flow
stub in the telemetry runbook, and a glossary anchor.
- A sync_diagnostics group in expected_metrics.json and a matching
assertion helper in validate_telemetry.py so CI fails when a signal
regresses to absent.
Also registers the new dashboard uid with the harness so the board is
covered by validation.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Document the two new ledger-correlation attributes in the data-collection
reference: add them to the transaction and TxQ attribute tables (with per-span
coverage), update the attribute count, and correct the txq.enqueue parent note
(parents to tx.process on the submission path via explicit context; a root on
the open-ledger rebuild path, correlated via current_ledger_seq).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Brings coroutine-aware context storage + tx/consensus worker-body activation.
Resolved: Telemetry.cpp keeps both meterProvider_ (phase-7) and contextStorage_
(coro-aware); doc-09 keeps phase-7 structure and applies the pathfind.request →
rpc.command.<name> correction to phase-7's own PathFind section.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The check-rename CI gate requires all prose/comment references to use the
new naming. Fix the four remaining occurrences ("Ripple epoch",
"rippled's doAccept") introduced by this branch's dashboard/glossary
commits. Comment- and doc-only; no behavior change.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Reflects the C1 fix: rpc.command.* stays unscoped (its dispatch wraps
doRipplePathFind which yields), so pathfind.request nests under rpc.process.
The request -> compute -> discover sub-tree nests correctly via ScopedSpanGuard.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The "ledger close time" was mis-derived and partly un-queryable:
- Build vs Close Duration derived close time from the consensus.ledger_close
span, which only wraps the onClose() prologue (~0.8ms live) — not the close.
Repoint the close series to consensus.round (full round, live P95 ~4.8s).
- The network close-time value (close_time) lived only as a span attribute,
un-queryable in Prometheus and unfit as a spanmetrics label (monotonic
timestamp -> unbounded cardinality). Expose it as last_close_time on the
existing server_info observable gauge (native gauge, no new instrument).
- Add a "Ledger Close Interval & Age" panel to ledger-operations and
node-health: interval = 1/rate(ledgers_closed_total) (counter-based,
scrape-independent); age = time() - (last_close_time + epoch_offset).
A gauge delta is deliberately NOT used for the interval — a timestamp gauge's
delta aliases to the scrape period, not the close cadence (verified live).
Guardrail comments in both collector configs record why close_time must never
become a spanmetrics dimension. Docs (09-reference) and the operator runbook
updated to match.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Document that deterministic-trace_id spans (tx.* apply pipeline, tx.process,
tx.receive, consensus.round) are now genuine trace roots with empty
parent_span_id via the custom DeterministicIdGenerator, superseding the old
synthetic-parent behavior that showed 'root span not yet received' in Tempo.
Also update the fresh-root note: peer entry spans use ScopedSpanGuard::freshRoot().
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
These inbound peer-message entry points (kConsumer) used span(), which
inherits whatever span is active on the peer thread — including a leaked
tx.receive scope — so validations/proposals were wrongly nested under
unrelated transaction traces. rootSpan() starts a fresh trace root.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Document the three perf-iac filter template variables (xrpl_work_item,
xrpl_branch, xrpl_node_role) in the telemetry runbook and the data-collection
reference: what they filter, their example values, and that perf-iac stamps
them as resource attributes from its own alloy pipeline (absent outside
perf comparison runs, so the filters default to All). Also record perf as a
network value.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The spanmetrics connector had no namespace, so it emitted traces_span_metrics_*
metric names by default. The span dashboards and docs are renamed to query
span_* names; this is only correct if the connector emits them too, so add
namespace: "span" to the spanmetrics connector. Both sides change together:
renaming the dashboards without the namespace (or vice versa) would break the
pipeline. Matches the phase9 collector config.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The phase7 OTelCollector::formatName lowercases and strips names, emitting
snake_case metrics with no xrpld_ prefix. The native Grafana dashboards and
the telemetry docs still queried the old xrpld_CamelCase names, so they were
broken against their own pipeline. Rename every metric name to match what the
code emits: drop the xrpld_ prefix and lowercase the remainder. The two job
histograms also drop the redundant 'duration' word (job_queued_us,
job_running_us) to match the phase9 forms. Add havetxset to the cspell
dictionary since the lowercased metric name no longer word-splits.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Strip xrpld_ prefix, lowercase beast::insight names, and replace
traces_span_metrics_ with span_ in all remaining tracked files:
alert rules, integration tests, workload validation, TESTING.md,
OpenTelemetryPlan docs, code comments, and config templates.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Update the transform/cloudlabels processor to set service_instance_id
instead of exported_instance, matching the local Prometheus path where
resource_to_telemetry_conversion promotes service.instance.id with that
exact label name. Also update source comments and documentation.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
