- Previously, mulDiv had `std::pair<bool, uint64_t>` as the output type.
- This is an error-prone interface as it is easy to ignore when
overflow occurs.
- Using a return type of `std::optional` should decrease the likelihood
of ignoring overflow.
- It also allows for the use of optional::value_or() as a way to
explicitly recover from overflow.
- Include limits.h header file preprocessing directive in order to
satisfy gcc's numeric_limits incomplete_type requirement.
Fix#3495
---------
Co-authored-by: John Freeman <jfreeman08@gmail.com>
* Create the FeeSettings object in genesis ledger.
* Initialize with default values from the config. Removes the need to
pass a Config down into the Ledger initialization functions, including
setup().
* Drop the undocumented fee config settings in favor of the [voting]
section.
* Fix#3734.
* If you previously used fee_account_reserve and/or fee_owner_reserve,
you should change to using the [voting] section instead. Example:
```
[voting]
account_reserve=10000000
owner_reserve=2000000
```
* Because old Mainnet ledgers (prior to 562177 - yes, I looked it up)
don't have FeeSettings, some of the other ctors will default them to
the config values before setup() tries to load the object.
* Update default Config fee values to match Mainnet.
* Fix unit tests:
* Updated fees: Some tests are converted to use computed values of fee
object, but the default Env config was also updated to fix the rest.
* Unit tests that check the structure of the ledger have updated
hashes and counts.
* Introduces amendment `XRPFees`
* Convert fee voting and protocol messages to use XRPAmounts
* Includes Validations, Change transactions, the "Fees" ledger object,
and subscription messages
* Improve handling of 0 drop reference fee with TxQ. For use with networks that do not want to require fees
* Note that fee escalation logic is still in place, which may cause the
open ledger fee to rise if the network is busy. 0 drop transactions
will still queue, and fee escalation can be effectively disabled by
modifying the configuration on all nodes
* Change default network reserves to match Mainnet
* Name the new SFields *Drops (not *XRP)
* Reserve SField IDs for Hooks
* Clarify comments explaining the ttFEE transaction field validation
* Txs with the same fee level will sort by TxID XORed with the parent
ledger hash.
* The TxQ is re-sorted after every ledger.
* Attempt to future-proof the TxQ tie breaking test
* Sort by fee level (which is the current behavior) then by transaction
ID (hash).
* Edge case when the account at the end of the queue submits a higher
paying transaction to walk backwards and compare against the cheapest
transaction from a different account.
* Use std::if_any to simplify the JobQueue::isOverloaded loop.
* Only require adding the new feature names in one place. (Also need to
increment a counter, but a check on startup will catch that.)
* Allows rippled to have the code to support a given amendment, but
not vote for it by default. This allows the amendment to be enabled in
a future version without necessarily amendment blocking these older
versions.
* The default vote is carried with the amendment name in the list of
supported amendments.
* The amendment table is constructed with the amendment and default
vote.
Support for 'out-of-sequence' transaction execution was introduced
in commit 7724cca384.
The changes in that commit were gated under a feature but there was
no corresponding amendment introduced that would allow the network
to vote on this amendment.
This commit introduces 'TicketBatch' amendment as the amendment
that is associated with the tickets feature. If the amendment is
enabled, it will activate support for tickets.
This commit also removes several workarounds that are no longer
needed in unit tests.
Tickets are a mechanism to allow for the "out-of-order" execution of
transactions on the XRP Ledger.
This commit, if merged, reworks the existing support for tickets and
introduces support for 'ticket batching', completing the feature set
needed for tickets.
The code is gated under the newly-introduced `TicketBatch` amendment
and the `Tickets` amendment, which is not presently active on the
network, is being removed.
The specification for this change can be found at:
https://github.com/xrp-community/standards-drafts/issues/16
The XRP Ledger utilizes an account model. Unlike systems based on a UTXO
model, XRP Ledger accounts are first-class objects. This design choice
allows the XRP Ledger to offer rich functionality, including the ability
to own objects (offers, escrows, checks, signer lists) as well as other
advanced features, such as key rotation and configurable multi-signing
without needing to change a destination address.
The trade-off is that accounts must be stored on ledger. The XRP Ledger
applies reserve requirements, in XRP, to protect the shared global ledger
from growing excessively large as the result of spam or malicious usage.
Prior to this commit, accounts had been permanent objects; once created,
they could never be deleted.
This commit introduces a new amendment "DeletableAccounts" which, if
enabled, will allow account objects to be deleted by executing the new
"AccountDelete" transaction. Any funds remaining in the account will
be transferred to an account specified in the deletion transaction.
The amendment changes the mechanics of account creation; previously
a new account would have an initial sequence number of 1. Accounts
created after the amendment will have an initial sequence number that
is equal to the ledger in which the account was created.
Accounts can only be deleted if they are not associated with any
obligations (like RippleStates, Escrows, or PayChannels) and if the
current ledger sequence number exceeds the account's sequence number
by at least 256 so that, if recreated, the account can be protected
from transaction replay.
At this point all of the jss::* names are defined in the same
file. That file has been named JsonFields.h. That file name
has little to do with either JsonStaticStrings (which is what
jss is short for) or with jss. The file is renamed to jss.h
so the file name better reflects what the file contains.
All includes of that file are fixed. A few include order
issues are tidied up along the way.
* initFee was using a lot of logic that could look unclear. Add
some documentation explaining why certain values were used.
* Because initFee had side effects, callers needed to repeat the
max queue size computation, making the initial problem more
likely. Instead, return the max queue size value, so the caller
can reuse it.
* A newer test (testInFlightBalance()) was incorrectly using a
hard-coded queue limit. Fix it to use initFee's new return
value.
* Relevant when deciding whether an account can queue multiple
transactions. If the potential spend of the already queued
transactions would dip into the reserve, the reserve is
preserved for fees.
* Also change several direct modifications of the owner count to
call adjustOwnerCount to preserve overflow checking.
* Update related unit testcase
* Resolves#2251
The FeeEscalation amendment has been enabled on the XRP Ledger network
since May 19, 2016. The transaction which activated this amendment is:
5B1F1E8E791A9C243DD728680F108FEF1F28F21BA3B202B8F66E7833CA71D3C3.
This change removes all conditional code based around the FeeEscalation
amendment, but leaves the amendment definition itself since removing the
definition would cause nodes to think an unknown amendment was activate
causing them to become amendment blocked.
The commit also removes the redundant precomputed hashes from the
supportedAmendments vector.
* If rippled is not synced to the network, `fee` will return a
"no network" error instead of the possibly confusing "not enabled"
error.
* Resolves RIPD-1588
* When increasing the expected ledger size, add on an extra 20%.
* When decreasing the expected ledger size, take the minimum of the
validated ledger size or the old expected size, and subract another 50%.
* Update fee escalation documentation.
* Refactor the FeeMetrics object to use values from Setup
Fixes: RIPD-1575. Fix argument passing to runner. Allow multiple unit
test selectors to be passed via --unittest argument. Add optional
integer priority value to test suite list. Fix several failing manual
tests. Update CLI usage message to make it clearer.
* Remove composite helper functions
* Add set difference and Bitset/uint256 operators
* Convert tests to use new feature bitset set difference operator
In order to automatically run unit tests with newly created
amendments, prefer to start with jtx::supported_features() and
then subtract unwanted features.
These changes identified a few bugs that were hiding in
amendments. One of those bugs, in FlowCross, is not yet fixed.
By uncommenting the test in CrossingLimits_test.cpp you can see
failures relating to that bug. Since FlowCross is not yet
enabled on the network we can fix the bug at our convenience.
Both Tickets and SHAMapV2 have been around for a while and don't
look like they will be enabled on the network soon. So they are
removed from the supportedAmendments list. This prevents Env
from automatically testing with Tickets or SHAMapV2 enabled,
although testing with those features can still be explicitly
specified.
Drive-by cleanups:
o supportedAmendments() returns a const reference rather than
a fresh vector on each call.
o supportedAmendments() implementation moved from Amendments.cpp
to Feature.cpp. Amendments.cpp deleted.
o supportedAmendments() declared in Feature.h. All other
declarations deleted.
o preEnabledAmendments() removed, since it was empty and only
used in one place. It will be easy to re-add when it is needed.
o jtx::all_features_except() renamed to
jtx::supported_features_except(), which is more descriptive.
o jtx::all_amendments() renamed to jxt::supported_amendments()
o jtx::with_features() renamed to with_only_features()
o Env_test.cpp adjusted since featureTickets is no longer
automatically enabled for unit tests.
* If the transaction can't be queued, recover to the open ledger once,
and drop it on the next attempt.
* New result codes for transactions that can not queue.
* Add minimum queue size.
* Remove the obsolete and incorrect SF_RETRY flag.
* fix#2215
Enable all supported amendments in Env by default. Rename `features()`
to `with_features()` and add `all_features_except()` to support feature
subsets in Env. Refactor internal feature handling based on a bitset.
This is a substantial refactor of the consensus code and also introduces
a basic consensus simulation and testing framework. The new generic/templated
version is in src/ripple/consensus and documents the current type requirements.
The version adapted for the RCL is in src/ripple/app/consensus. The testing
framework is in src/test/csf.
Minor behavioral changes/fixes include:
* Adjust close time offset even when not validating.
* Remove spurious proposing_ = false call at end of handleLCL.
* Remove unused functionality provided by checkLastValidation.
* Separate open and converge time
* Don't send a bow out if we're not proposing
* Prevent consensus stopping if NetworkOPs switches to disconnect mode while
consensus accepts a ledger
* Prevent a corner case in which Consensus::gotTxSet or Consensus::peerProposal
has the potential to update internal state while an dispatched accept job is
running.
* Distinguish external and internal calls to startNewRound. Only external
calls can reset the proposing_ state of consensus
* RPC `ledger` command returns all queue entries in "queue_data"
when requesting open ledger, and including boolean "queue: true".
* Includes queue state. e.g.: fee_level, retries, last_result, tx.
* Respects "expand" and "binary" parameters for the txs.
* Remove some unused code.
Add envconfig test helper for manipulating Env config via
callables. Create new common modifiers for non-admin config,
validator config and one for using different server port values.
