This change fixes the suite names all around the test files, to make them match to the folder name in which this test files are located. Also, the RCL test files are relocated to the consensus folder, because they are testing consensus functionality.
- Specification: [XRPLF/XRPL-Standards 56](https://github.com/XRPLF/XRPL-Standards/blob/master/XLS-0056d-batch/README.md)
- Amendment: `Batch`
- Implements execution of multiple transactions within a single batch transaction with four execution modes: `tfAllOrNothing`, `tfOnlyOne`, `tfUntilFailure`, and `tfIndependent`.
- Enables atomic multi-party transactions where multiple accounts can participate in a single batch, with up to 8 inner transactions and 8 batch signers per batch transaction.
- Inner transactions use `tfInnerBatchTxn` flag with zero fees, no signature, and empty signing public key.
- Inner transactions are applied after the outer batch succeeds via the `applyBatchTransactions` function in apply.cpp.
- Network layer prevents relay of transactions with `tfInnerBatchTxn` flag - each peer applies inner transactions locally from the batch.
- Batch transactions are excluded from AccountDelegate permissions but inner transactions retain full delegation support.
- Metadata includes `ParentBatchID` linking inner transactions to their containing batch for traceability and auditing.
- Extended STTx with batch-specific signature verification methods and added protocol structures (`sfRawTransactions`, `sfBatchSigners`).
* fixInnerObjTemplate2 amendment:
Apply inner object templates to all remaining (non-AMM)
inner objects.
Adds a unit test for applying the template to sfMajorities.
Other remaining inner objects showed no problems having
templates applied.
* Move CMake directory
* Rearrange sources
* Rewrite includes
* Recompute loops
---------
Co-authored-by: Pretty Printer <cpp@ripple.com>
When an AMM account is deleted, the owner directory entries must be
deleted in order to ensure consistent ledger state.
* When deleting AMM account:
* Clean up AMM owner dir, linking AMM account and AMM object
* Delete trust lines to AMM
* Disallow `CheckCreate` to AMM accounts
* AMM cannot cash a check
* Constrain entries in AuthAccounts array to be accounts
* AuthAccounts is an array of objects for the AMMBid transaction
* SetTrust (TrustSet): Allow on AMM only for LP tokens
* If the destination is an AMM account and the trust line doesn't
exist, then:
* If the asset is not the AMM LP token, then fail the tx with
`tecNO_PERMISSION`
* If the AMM is in empty state, then fail the tx with `tecAMM_EMPTY`
* This disallows trustlines to AMM in empty state
* Add AMMID to AMM root account
* Remove lsfAMM flag and use sfAMMID instead
* Remove owner dir entry for ltAMM
* Add `AMMDelete` transaction type to handle amortized deletion
* Limit number of trust lines to delete on final withdraw + AMMDelete
* Put AMM in empty state when LPTokens is 0 upon final withdraw
* Add `tfTwoAssetIfEmpty` deposit option in AMM empty state
* Fail all AMM transactions in AMM empty state except special deposit
* Add `tecINCOMPLETE` to indicate that not all AMM trust lines are
deleted (i.e. partial deletion)
* This is handled in Transactor similar to deleted offers
* Fail AMMDelete with `tecINTERNAL` if AMM root account is nullptr
* Don't validate for invalid asset pair in AMMDelete
* AMMWithdraw deletes AMM trust lines and AMM account/object only if the
number of trust lines is less than max
* Current `maxDeletableAMMTrustLines` = 512
* Check no directory left after AMM trust lines are deleted
* Enable partial trustline deletion in AMMWithdraw
* Add `tecAMM_NOT_EMPTY` to fail any transaction that expects an AMM in
empty state
* Clawback considerations
* Disallow clawback out of AMM account
* Disallow AMM create if issuer can claw back
This patch applies to the AMM implementation in #4294.
Acknowledgements:
Richard Holland and Nik Bougalis for responsibly disclosing this issue.
Bug Bounties and Responsible Disclosures:
We welcome reviews of the project code and urge researchers to
responsibly disclose any issues they may find.
To report a bug, please send a detailed report to:
bugs@xrpl.org
Signed-off-by: Manoj Doshi <mdoshi@ripple.com>
Add AMM functionality:
- InstanceCreate
- Deposit
- Withdraw
- Governance
- Auctioning
- payment engine integration
To support this functionality, add:
- New RPC method, `amm_info`, to fetch pool and LPT balances
- AMM Root Account
- trust line for each IOU AMM token
- trust line to track Liquidity Provider Tokens (LPT)
- `ltAMM` object
The `ltAMM` object tracks:
- fee votes
- auction slot bids
- AMM tokens pair
- total outstanding tokens balance
- `AMMID` to AMM `RootAccountID` mapping
Add new classes to facilitate AMM integration into the payment engine.
`BookStep` uses these classes to infer if AMM liquidity can be consumed.
The AMM formula implementation uses the new Number class added in #4192.
IOUAmount and STAmount use Number arithmetic.
Add AMM unit tests for all features.
AMM requires the following amendments:
- featureAMM
- fixUniversalNumber
- featureFlowCross
Notes:
- Current trading fee threshold is 1%
- AMM currency is generated by: 0x03 + 152 bits of sha256{cur1, cur2}
- Current max AMM Offers is 30
---------
Co-authored-by: Howard Hinnant <howard.hinnant@gmail.com>
Change `ledger_data` to return an empty list when all entries are
filtered out.
When the `type` field is specified for the `ledger_data` method, it is
possible that no objects of the specified type are found. This can even
occur if those objects exist, but not in the section that the server
checked while serving your request. Previously, the `state` field of the
response has the value `null`, instead of an empty array `[]`. By
changing this to an empty array, the response is the same data type so
that clients can handle it consistently.
For example, in Python, `for entry in state` should now work correctly.
It would raise an exception if `state` is `null` (or `None`).
This could break client code that explicitly checks for null. However,
this fix aligns the response with the documentation, where the `state`
field is an array.
Fix#4392.
* Create the FeeSettings object in genesis ledger.
* Initialize with default values from the config. Removes the need to
pass a Config down into the Ledger initialization functions, including
setup().
* Drop the undocumented fee config settings in favor of the [voting]
section.
* Fix#3734.
* If you previously used fee_account_reserve and/or fee_owner_reserve,
you should change to using the [voting] section instead. Example:
```
[voting]
account_reserve=10000000
owner_reserve=2000000
```
* Because old Mainnet ledgers (prior to 562177 - yes, I looked it up)
don't have FeeSettings, some of the other ctors will default them to
the config values before setup() tries to load the object.
* Update default Config fee values to match Mainnet.
* Fix unit tests:
* Updated fees: Some tests are converted to use computed values of fee
object, but the default Env config was also updated to fix the rest.
* Unit tests that check the structure of the ledger have updated
hashes and counts.
Support for 'out-of-sequence' transaction execution was introduced
in commit 7724cca384.
The changes in that commit were gated under a feature but there was
no corresponding amendment introduced that would allow the network
to vote on this amendment.
This commit introduces 'TicketBatch' amendment as the amendment
that is associated with the tickets feature. If the amendment is
enabled, it will activate support for tickets.
This commit also removes several workarounds that are no longer
needed in unit tests.
Tickets are a mechanism to allow for the "out-of-order" execution of
transactions on the XRP Ledger.
This commit, if merged, reworks the existing support for tickets and
introduces support for 'ticket batching', completing the feature set
needed for tickets.
The code is gated under the newly-introduced `TicketBatch` amendment
and the `Tickets` amendment, which is not presently active on the
network, is being removed.
The specification for this change can be found at:
https://github.com/xrp-community/standards-drafts/issues/16
At this point all of the jss::* names are defined in the same
file. That file has been named JsonFields.h. That file name
has little to do with either JsonStaticStrings (which is what
jss is short for) or with jss. The file is renamed to jss.h
so the file name better reflects what the file contains.
All includes of that file are fixed. A few include order
issues are tidied up along the way.
Fixes: RIPD-1575. Fix argument passing to runner. Allow multiple unit
test selectors to be passed via --unittest argument. Add optional
integer priority value to test suite list. Fix several failing manual
tests. Update CLI usage message to make it clearer.
The lsfDepositAuth flag limits the AccountIDs that can deposit into
the account that has the flag set. The original design only
allowed deposits to complete if the account with the flag set also
signed the transaction that caused the deposit.
The DepositPreauth ledger type allows an account with the
lsfDepositAuth flag set to preauthorize additional accounts.
This preauthorization allows them to sign deposits as well. An
account can add DepositPreauth objects to the ledger (and remove
them as well) using the DepositPreauth transaction.
* Remove composite helper functions
* Add set difference and Bitset/uint256 operators
* Convert tests to use new feature bitset set difference operator
In order to automatically run unit tests with newly created
amendments, prefer to start with jtx::supported_features() and
then subtract unwanted features.
These changes identified a few bugs that were hiding in
amendments. One of those bugs, in FlowCross, is not yet fixed.
By uncommenting the test in CrossingLimits_test.cpp you can see
failures relating to that bug. Since FlowCross is not yet
enabled on the network we can fix the bug at our convenience.
Both Tickets and SHAMapV2 have been around for a while and don't
look like they will be enabled on the network soon. So they are
removed from the supportedAmendments list. This prevents Env
from automatically testing with Tickets or SHAMapV2 enabled,
although testing with those features can still be explicitly
specified.
Drive-by cleanups:
o supportedAmendments() returns a const reference rather than
a fresh vector on each call.
o supportedAmendments() implementation moved from Amendments.cpp
to Feature.cpp. Amendments.cpp deleted.
o supportedAmendments() declared in Feature.h. All other
declarations deleted.
o preEnabledAmendments() removed, since it was empty and only
used in one place. It will be easy to re-add when it is needed.
o jtx::all_features_except() renamed to
jtx::supported_features_except(), which is more descriptive.
o jtx::all_amendments() renamed to jxt::supported_amendments()
o jtx::with_features() renamed to with_only_features()
o Env_test.cpp adjusted since featureTickets is no longer
automatically enabled for unit tests.
Enable all supported amendments in Env by default. Rename `features()`
to `with_features()` and add `all_features_except()` to support feature
subsets in Env. Refactor internal feature handling based on a bitset.
The 'type' field allows the rpc client to specify what type of ledger
entries to retrieve. The available types are:
"account"
"amendments"
"directory"
"fee"
"hashes"
"offer"
"signer_list"
"state"
"ticket"
Add envconfig test helper for manipulating Env config via
callables. Create new common modifiers for non-admin config,
validator config and one for using different server port values.
This combines two enhancements to the ledger_data RPC
command and related commands.
The ledger_data RPC command will now return the ledger header
in the first query (the one with no marker specified).
Also, ledger_data and related commands will now provide the
ledger header in binary if binary output is specified.
Modified existing ledgerdata unit test to cover new functionality.
