The table of contents in this file indexes third- and fourth-level headings,
so a new subsection that is absent from it is a gap rather than a style
choice.
Compiled out, compiled in and tracing, compiled in with no active span, and
compiled in but disabled by config all have to produce the right wire bytes,
and only two of them are obvious. Tabulate them, and record why the predicate
reads the context directly instead of calling GetSpan(), which allocates a
DefaultSpan in the no-span case.
mutable_ on a protobuf optional submessage allocates it and sets its has-bit
at the call site, before the helper can decide there is nothing to write. A
caller that dereferences it ships an empty TraceContext whenever nothing is
recorded, and its peers each take a branch to extract nothing.
Document the rule with the right and wrong forms side by side.
The conditional-compilation section promised zero overhead when telemetry is
not wanted. The span disappears, but the arguments passed to it do not: the
compiled-out guards are ordinary inline functions, so a to_string() or a hash
in an argument list still runs and its result is then discarded.
State that, show the guard that does remove the work, and name the opposite
case -- the metric macros, which discard their arguments and need no guard.
close_time_avalanche_state is new; the row also did not say that the other
three are rewritten on every convergence iteration, so a reader could not tell
that the exported value is the last one rather than a series.
This row is byte-identical on phases 5 through 10, so it is edited here and
merges forward. The consensus.phase.open row is empty until phase 9 and is
updated there instead.
Bring the three documentation surfaces in line with the new parse-time check:
- The @throws clause on makeTelemetrySetup now names the third failure
condition and records that an empty path is skipped.
- cfg/xrpld-example.cfg states, under all three TLS keys, that with enabled=1
and use_tls=1 a path that does not exist or cannot be read stops startup. The
tls_ca_cert wording still says that empty selects the system CA store, since
only a path that is set is checked.
- The runbook troubleshooting entry gains a third bullet for the "cannot be
read" message, whose remedy is the path or its permissions rather than the
certificate and key pairing.
Documentation only; no behaviour change.
makeTelemetrySetup() rejects a contradictory [telemetry] mutual-TLS
setup by throwing, but it is called from ApplicationImp's
member-initializer list. A try/catch in the constructor body cannot
reach a throw from there, and nothing further up the stack caught it
either, so a config mistake reached std::terminate: the default handler
printed a terminate dump and raised SIGABRT, leaving a core file
instead of a startup error.
Catch std::exception around makeApplication() in run(), report the
reason on stderr and return -1, so the failure is a clean non-zero exit
with a message an operator can act on. Only the construction is
wrapped. setup() starts subsystems whose shutdown order is delicate and
is left outside deliberately, because unwinding a half-started
Application would skip the normal stop sequence.
Gate both validation guards on enabled. A node with telemetry switched
off previously refused to start over certificate paths that nothing
would read.
Document both throws on makeTelemetrySetup(), state in
cfg/xrpld-example.cfg and the configuration reference that a partial
mutual-TLS setup is fatal and that the checks apply only when
enabled=1, and add a runbook troubleshooting entry keyed on the two
error messages.
Tests cover both guards with the message asserted so the two are told
apart, both enabled=0 paths, and the default plaintext configuration.
The integration test asserted `rippled_job_count`, which never reports any
series, so that check always failed. `JobQueue` registers the gauge as
`makeGauge("job_count")`, but `Application.cpp` passes it
`collectorManager_->group("jobq")`, so the emitted StatsD name is
`jobq.job_count` and the exported Prometheus name is
`<prefix>_jobq_job_count`.
Corrected the same name in two runbook tables that also dropped the `jobq`
segment. `09-data-collection-reference.md` already had it right, which is why
the two documents disagreed.
Routed here rather than to the phase-10 PR where it was reported: the wrong
name is present in `integration-test.sh` on every branch from phase 6
onward, and this is the branch that introduces the file.
Left alone deliberately:
- `statsd-node-health.json` still queries the old name, but that dashboard is
deleted at phase 7 in favour of `node-health.json`
- `06-implementation-phases.md` names `job_count`, which is accurate as the
code-level makeGauge argument rather than the exported metric name
The integration test's span assertions never actually ran. check_span()
built a Tempo /api/search call with --data-urlencode but no -G, so curl
POSTed the params as a body; Tempo answers 200 and ignores the query, so
every span name looked present. Verified against a live Tempo 2.9.4: the
buggy form returns the store's total trace count for any name, including
"zzz.does.not.exist"; with -G a real name returns 1 and a bogus one 0.
Fixed alongside it: the RPC check asserted "rpc.request", which is never
emitted (ServerHandler.cpp builds "rpc.http_request"). These two had to
change together, since -G turns the bogus name from a silent pass into a
hard failure.
Also in the script: a consensus timeout logged two failures and counted
two, because a post-loop else re-reported what the timeout branch had
already reported; and three unguarded curl calls aborted the whole script
under set -euo pipefail, making the ACCOUNT_ZERO fallback dead code with
no cleanup. Guarded the curls and wired an EXIT trap to the existing
cleanup(). The trap deliberately fires only before the summary, so a
completed run still leaves the stack up as the header documents.
Docs corrections, all re-derived from code:
- span inventory heading 35 -> 38, attribute heading 83 -> 89 rows
(78 unique keys), and the section 6 header table now carries the
missing TxApplySpanNames.h row so its columns sum to the same figures
- two stale paths: ConsensusSpanNames.h is under include/xrpl/consensus/,
TxSpanNames.h under src/xrpld/telemetry/
- consensus_round_id is int64, not string (RCLConsensus.cpp sets
prevLgr.seq() + 1); the runbook's TraceQL examples now use a numeric
literal instead of an unparseable bare <round_id>
- state-accounting duration gauges are cumulative MICROSECONDS, not
seconds (NetworkOPs.cpp declares std::chrono::microseconds and
publishes dur.count() raw)
- sampling_ratio is not a config key; head sampling is fixed at 1.0 and
the shipped collector has no tail sampling, so the caveat was rewritten
- the plan blurb referenced Jaeger; this stack is Tempo
Grafana renders `unit: "ops"` as the literal string "ops/s", so every
rate panel read as "operations per second" regardless of what it
actually counted. `Ledger Build Rate` showed "0.258 ops/s" where the
value is one ledger every 3.9s -- the number was right, the unit was
meaningless.
Replace the generic units with Grafana custom-suffix units naming the
quantity, following the existing `suffix:/hr` and `si:drops` precedent
in this repo. Nine of these are `stat` panels with no axis, so the unit
string was the only text a reader ever saw.
Also switch the two trusted/untrusted piecharts and the transaction
path piechart from rate() to increase(): a per-slice "per second"
reading is not a share of a total, counts in the window are.
Queries are unchanged apart from those three; the values were already
correct.
Alongside, bring the touched panels up to the dashboard guidelines:
tooltip mode/sort/max-height, 30-minute null spanning, and axis labels
in title case. Hoist the stat panels above the fold on
ledger-operations and rpc-performance.
Panels that a later branch in this chain removes are deliberately left
alone -- fixing them would only add merge conflicts.
Add current_ledger_seq / current_ledger_hash to the tx.process, tx.receive,
and txq.enqueue span-reference rows, correct the txq.enqueue parent note
(parents to tx.process on the submission path via explicit context; a root on
the open-ledger rebuild path), and add a "Correlating a transaction to the
ledger it was worked on" recipe joining the txID-keyed tx/txq spans to the
ledger trace via current_ledger_seq.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
