* Adds `tecNO_DELEGATE_PERMISSION` for unauthorized transactions sent by a delegated account.
* Returns `tecNO_TARGET` instead of `terNO_ACCOUNT` for the `DelegateSet` transaction if the delegated account does not exist.
* Fixes `tfFullyCanonicalSig` and `tfInnerBatchTxn` blocking transactions issue by adding `tfUniversal` in the permission related masks in `txFlags.h`
The change increases the default network I/O worker thread pool size from 2 to 6. This will improve stability, as worker thread saturation correlates to desyncs, particularly on high-traffic peers, such as hubs.
- Specification: https://github.com/XRPLF/XRPL-Standards/pull/272
- Amendment: `TokenEscrow`
- Enables escrowing of IOU and MPT tokens in addition to native XRP.
- Allows accounts to lock issued tokens (IOU/MPT) in escrow objects, with support for freeze, authorization, and transfer rates.
- Adds new ledger fields (`sfLockedAmount`, `sfIssuerNode`, etc.) to track locked balances for IOU and MPT escrows.
- Updates EscrowCreate, EscrowFinish, and EscrowCancel transaction logic to support IOU and MPT assets, including proper handling of trustlines and MPT authorization, transfer rates, and locked balances.
- Enforces invariant checks for escrowed IOU/MPT amounts.
- Extends GatewayBalances RPC to report locked (escrowed) balances.
The changes are focused on fixing NFT transactions bypassing the trustline authorization requirement and potential invariant violation when interacting with deep frozen trustlines.
* Add AMM bid/create/deposit/swap/withdraw/vote invariants:
- Deposit, Withdrawal invariants: `sqrt(asset1Balance * asset2Balance) >= LPTokens`.
- Bid: `sqrt(asset1Balance * asset2Balance) > LPTokens` and the pool balances don't change.
- Create: `sqrt(asset1Balance * assetBalance2) == LPTokens`.
- Swap: `asset1BalanceAfter * asset2BalanceAfter >= asset1BalanceBefore * asset2BalanceBefore`
and `LPTokens` don't change.
- Vote: `LPTokens` and pool balances don't change.
- All AMM and swap transactions: amounts and tokens are greater than zero, except on withdrawal if all tokens
are withdrawn.
* Add AMM deposit and withdraw rounding to ensure AMM invariant:
- On deposit, tokens out are rounded downward and deposit amount is rounded upward.
- On withdrawal, tokens in are rounded upward and withdrawal amount is rounded downward.
* Add Order Book Offer invariant to verify consumed amounts. Consumed amounts are less than the offer.
* Fix Bid validation. `AuthAccount` can't have duplicate accounts or the submitter account.
This commit introduces the following changes:
* Renames `vp_enable config` option to `vp_base_squelch_enable` to enable squelching for validators.
* Removes `vp_squelch` config option which was used to configure whether to send squelch messages to peers or not. With this flag removed, if squelching is enabled, squelch messages will be sent. This was an option used for debugging.
* Introduces a temporary `vp_base_squelch_max_trusted_peers` config option to change the max number of peers who are selected as validator message sources. This is a temporary option, which will be removed once a good value is found.
* Adds a traffic counter to count the number of times peers ignored squelch messages and kept sending messages for squelched validators.
* Moves the decision whether squelching is enabled and ready into Slot.h.
- Specification: [XRPLF/XRPL-Standards 56](https://github.com/XRPLF/XRPL-Standards/blob/master/XLS-0056d-batch/README.md)
- Amendment: `Batch`
- Implements execution of multiple transactions within a single batch transaction with four execution modes: `tfAllOrNothing`, `tfOnlyOne`, `tfUntilFailure`, and `tfIndependent`.
- Enables atomic multi-party transactions where multiple accounts can participate in a single batch, with up to 8 inner transactions and 8 batch signers per batch transaction.
- Inner transactions use `tfInnerBatchTxn` flag with zero fees, no signature, and empty signing public key.
- Inner transactions are applied after the outer batch succeeds via the `applyBatchTransactions` function in apply.cpp.
- Network layer prevents relay of transactions with `tfInnerBatchTxn` flag - each peer applies inner transactions locally from the batch.
- Batch transactions are excluded from AccountDelegate permissions but inner transactions retain full delegation support.
- Metadata includes `ParentBatchID` linking inner transactions to their containing batch for traceability and auditing.
- Extended STTx with batch-specific signature verification methods and added protocol structures (`sfRawTransactions`, `sfBatchSigners`).
Before #5224, the pseudoaccount ID was calculated using prefix expressed in `std::uint16_t`. The refactoring to move the pseudoaccount ID calculation to View.cpp had accidentally changed the prefix type to `int` (derived from `auto i = 0`) which in turn changed the length of the input to `sha512Half` from 2 bytes to 4, altering the result.
This resulted in a different ID of the pseudoaccount calculated from the function after the refactoring, breaking the ledger. This impacts AMMCreate, even when the `SingleAssetVault` amendment is not active. This change restores the prefix type to `std::uint16_t`.
- Specification: XRPLF/XRPL-Standards#239
- Amendment: `SingleAssetVault`
- Implements a vault feature used to store a fungible asset (XRP, IOU, or MPT, but not NFT) and to receive shares in the vault (an MPT) in exchange.
- A vault can be private or public.
- A private vault can use permissioned domains, subject to the `PermissionedDomains` amendment.
- Shares can be exchanged back into asset with `VaultWithdraw`.
- Permissions on the asset in the vault are transitively applied on shares in the vault.
- Issuer of the asset in the vault can clawback with `VaultClawback`.
- Extended `MPTokenIssuance` with `DomainID`, used by the permissioned domain on the vault shares.
Co-authored-by: John Freeman <jfreeman08@gmail.com>
This change implements the account permission delegation described in XLS-75d, see https://github.com/XRPLF/XRPL-Standards/pull/257.
* Introduces transaction-level and granular permissions that can be delegated to other accounts.
* Adds `DelegateSet` transaction to grant specified permissions to another account.
* Adds `ltDelegate` ledger object to maintain the permission list for delegating/delegated account pair.
* Adds an optional `Delegate` field in common fields, allowing a delegated account to send transactions on behalf of the delegating account within the granted permission scope. The `Account` field remains the delegating account; the `Delegate` field specifies the delegated account. The transaction is signed by the delegated account.
This change updates the squelching logic to accept squelch messages for untrusted validators. As a result, servers will also squelch untrusted validator messages reducing duplicate traffic they generate.
In particular:
* Updates squelch message handling logic to squelch messages for all validators, not only trusted ones.
* Updates the logic to send squelch messages to peers that don't squelch themselves
* Increases the threshold for the number of messages that a peer has to deliver to consider it as a candidate for validator messages.
Combines four related changes:
1. "Decrease `shouldRelay` limit to 30s." Pretty self-explanatory. Currently, the limit is 5 minutes, by which point the `HashRouter` entry could have expired, making this transaction look brand new (and thus causing it to be relayed back to peers which have sent it to us recently).
2. "Give a transaction more chances to be retried." Will put a transaction into `LedgerMaster`'s held transactions if the transaction gets a `ter`, `tel`, or `tef` result. Old behavior was just `ter`.
* Additionally, to prevent a transaction from being repeatedly held indefinitely, it must meet some extra conditions. (Documented in a comment in the code.)
3. "Pop all transactions with sequential sequences, or tickets." When a transaction is processed successfully, currently, one held transaction for the same account (if any) will be popped out of the held transactions list, and queued up for the next transaction batch. This change pops all transactions for the account, but only if they have sequential sequences (for non-ticket transactions) or use a ticket. This issue was identified from interactions with @mtrippled's #4504, which was merged, but unfortunately reverted later by #4852. When the batches were spaced out, it could potentially take a very long time for a large number of held transactions for an account to get processed through. However, whether batched or not, this change will help get held transactions cleared out, particularly if a missing earlier transaction is what held them up.
4. "Process held transactions through existing NetworkOPs batching." In the current processing, at the end of each consensus round, all held transactions are directly applied to the open ledger, then the held list is reset. This bypasses all of the logic in `NetworkOPs::apply` which, among other things, broadcasts successful transactions to peers. This means that the transaction may not get broadcast to peers for a really long time (5 minutes in the current implementation, or 30 seconds with this first commit). If the node is a bottleneck (either due to network configuration, or because the transaction was submitted locally), the transaction may not be seen by any other nodes or validators before it expires or causes other problems.
This change addresses an issue where `rippled` attempts to connect to an IPv6 address, even when the local network lacks IPv6 support, resulting in a "Network is unreachable" error.
The fix replaces the custom endpoint selection logic with `boost::async_connect`, which sequentially attempts to connect to available endpoints until one succeeds or all fail.
This PR replaces the word `failed` with `failure` in any test names and renames some test files to fix MSVC warnings, so that it is easier to search through the test output to find tests that failed.
This change fixes a number of issues involved with CTID:
* CTID is not present on all RPC tx transactions.
* rpcWRONG_NETWORK is missing in the ErrorCodes.cpp
When using subscribe at admin RPC port to send webhooks for the transaction stream to a backend, on large(r) ledgers the endpoint receives fewer HTTP POSTs with TX information than the amount of transactions in a ledger. This change removes the hardcoded queue length to avoid dropping TX notifications for the admin-only command. In addition, the per-request TTL for outgoing RPC HTTP calls has been reduced from 10 minutes to 30 seconds.
This change introduces a new fix amendment (`fixPayChanV1`) that prevents the creation of new `PaymentChannelCreate` transaction with a `CancelAfter` time less than the current ledger time. It piggy backs off of fix1571.
Once the amendment is activated, creating a new `PaymentChannel` will require that if you specify the `CancelAfter` time/value, that value must be greater than or equal to the current ledger time.
Currently users can create a payment channel where the `CancelAfter` time is before the current ledger time. This results in the payment channel being immediately closed on the next PaymentChannel transaction.
This PR splits out `ledger_entry` tests into its own file (`LedgerEntry_test.cpp`) and alphabetizes the helper functions in `LedgerEntry.cpp`. These commits were split out of #5237 to make that PR a little more manageable, since these basic trivial changes are most of the diff. There is no code change, just moving code around.
Adds metric counters for the following P2P message types:
* Untrusted proposal and validation messages
* Duplicate proposal, validation and transaction messages
It’s possible for this to happen legitimately if a set of peers, including a validator, are connected in a cycle, and the latency and message processing time between those peers is significantly less than the latency between the validator and the last peer. It’s unlikely in the real world, but obviously easy to simulate with Antithesis.
The main goal of this optimisation is memory reduction in SHAMapTreeNodes by introducing intrusive pointers instead of standard std::shared_ptr and std::weak_ptr.
- Detects if the consensus process is "stalled". If it is, then we can declare a
consensus and end successfully even if we do not have 80% agreement on
our proposal.
- "Stalled" is defined as:
- We have a close time consensus
- Each disputed transaction is individually stalled:
- It has been in the final "stuck" 95% requirement for at least 2
(avMIN_ROUNDS) "inner rounds" of phaseEstablish,
- and either all of the other trusted proposers or this validator, if proposing,
have had the same vote(s) for at least 4 (avSTALLED_ROUNDS) "inner
rounds", and at least 80% of the validators (including this one, if
appropriate) agree about the vote (whether yes or no).
- If we have been in the establish phase for more than 10x the previous
consensus establish phase's time, then consensus is considered "expired",
and we will leave the round, which sends a partial validation (indicating
that the node is moving on without validating). Two restrictions avoid
prematurely exiting, or having an extended exit in extreme situations.
- The 10x time is clamped to be within a range of 15s
(ledgerMAX_CONSENSUS) to 120s (ledgerABANDON_CONSENSUS).
- If consensus has not had an opportunity to walk through all avalanche
states (defined as not going through 8 "inner rounds" of phaseEstablish),
then ConsensusState::Expired is treated as ConsensusState::No.
- When enough nodes leave the round, any remaining nodes will see they've
fallen behind, and move on, too, generally before hitting the timeout. Any
validations or partial validations sent during this time will help the
consensus process bring the nodes back together.
The Trustline RPC `no_ripple` flag gets set depending on `lsfDefaultRipple` flag, which is not a flag of a trustline but of the account root. The `lsfDefaultRipple` flag does not provide any insight if this particular trust line has `lsfLowNoRipple` or `lsfHighNoRipple` flag set, so it should not be used here at all. This change simplifies the logic.
The `end_marker` is used to limit the range of ledger entries to fetch. If `end_marker` is less than `marker`, a crash can occur. This change adds an additional check.
Changes the error to `malformedAddress` for `permissioned_domain` in the `ledger_entry` rpc, when the account is not a string. This change makes it more clear to a user what is wrong with their request.
What the LoadManager class does is stall detection, which is not the same as deadlock detection. In the condition of severe CPU starvation, LoadManager will currently intentionally crash rippled reporting `LogicError: Deadlock detected`. This error message is misleading as the condition being detected is not a deadlock. This change fixes and refactors the code in response.
The codebase is filled with includes that are unused, and which thus can be removed. At the same time, the files often do not include all headers that contain the definitions used in those files. This change uses clang-format and clang-tidy to clean up the includes, with minor manual intervention to ensure the code compiles on all platforms.
Combine multiple related debug log data points into a single
message. Allows quick correlation of events that
previously were either not logged or, if logged, strewn
across multiple lines, making correlation difficult.
The Heartbeat Timer and consensus ledger accept processing
each have this capability.
Also guarantees that log entries will be written if the
node is a validator, regardless of log severity level.
Otherwise, the level of these messages is at INFO severity.
* Add logging for amendment voting decision process
* When counting "received validations" to determine quorum, count the number of validators actually voting, not the total number of possible votes.
- Drop duplicate outgoing TMGetLedger messages per peer
- Allow a retry after 30s in case of peer or network congestion.
- Addresses RIPD-1870
- (Changes levelization. That is not desirable, and will need to be fixed.)
- Drop duplicate incoming TMGetLedger messages per peer
- Allow a retry after 15s in case of peer or network congestion.
- The requestCookie is ignored when computing the hash, thus increasing
the chances of detecting duplicate messages.
- With duplicate messages, keep track of the different requestCookies
(or lack of cookie). When work is finally done for a given request,
send the response to all the peers that are waiting on the request,
sending one message per peer, including all the cookies and
a "directResponse" flag indicating the data is intended for the
sender, too.
- Addresses RIPD-1871
- Drop duplicate incoming TMLedgerData messages
- Addresses RIPD-1869
- Improve logging related to ledger acquisition
- Class "CanProcess" to keep track of processing of distinct items
---------
Co-authored-by: Valentin Balaschenko <13349202+vlntb@users.noreply.github.com>
This change enhances the filtering in the ledger, ledger_data, and account_objects methods by also supporting filtering by the canonical name of the LedgerEntryType using case-insensitive matching.
Rewrites the code so that the lock is not held during the callback. Instead it locks twice, once before, and once after. This is safe due to the structure of the code, but is checked after the second lock. This allows mutex_ to be changed back to a regular mutex.
In PeerImpl.cpp, if the function is a message handler (onMessage) or called directly from a message handler, then it should use fee_, since when the handler returns (OnMessageEnd) then the charge function is called. If the function is not a message handler, such as a job queue item, it should remain charge.
