The file_storage extension was added to otel-collector-config.yaml, which
every stack mounts. That made the extension mandatory: the collector image
runs as 10001:10001 and ships no writable directory, so any stack without a
prepared volume would fail to start rather than merely lose offsets. The
workload-validation stack mounts this same config and has no such volume.
Offset persistence is only useful where logs outlive a restart. The workload
harness creates a fresh log directory per run, so it has nothing to resume
from. Move the extension, the receiver's storage reference and the extended
service.extensions list into otel-collector-filestorage.yaml, layered as a
second --config by the developer stack alone. The base config keeps
start_at: beginning, which is what actually fixes the reported defect, and
stays self-sufficient for every other stack.
Verified against the pinned collector image: the base config validates and
runs on its own with no volume mounted and still ingests a line written
before startup; base plus overlay validates, preserves the base receiver's
operators through the merge, and re-ingests that line zero times on a second
run against the same volume.
Six findings from the review of #6494 survived independent verification.
Each was checked against the branch tip, and where behaviour was in
question, against a live collector and Loki rather than from the
reviewer's claim or from documentation alone.
Plan-doc section numbering. 06-implementation-phases.md used "## 6.9"
twice: for the new Phase 8 section and for the pre-existing Risk
Assessment. Three references already pointed at 6.8.1 and none at 6.9,
and the later phases are numbered 6.8.2 through 6.8.4, so Phase 8
becomes 6.8.1 and the sequence is monotonic. Renumbering to 6.10, as
suggested on the PR, would have collided with Success Metrics.
filelog read position. The receiver relied on the upstream default
start_at=end, which skips everything a node wrote before the first poll
and reads nothing at all from a log that has stopped being written to.
Read from the beginning instead, paired with a file_storage extension so
a restart resumes at the last offset rather than re-ingesting the file.
The collector image runs as 10001:10001 and ships no writable directory,
and a fresh named volume is root-owned, so a one-shot init service
prepares the volume first. It reuses an image the stack already pulls,
adding no new dependency.
Loki log stream label. The job resource attribute did not become a Loki
index label, so the documented {job="xrpld"} queries matched nothing.
Verified against grafana/loki:3.4.2 with its default config: only
service_name and deployment_environment are indexed, and job arrives as
structured metadata, which a stream selector cannot match. Dropped the
attribute and moved the twelve queries this branch introduced to
{service_name="xrpld"}. Three further occurrences in
07-observability-backends.md originate on the phase-1a branch and are
left for a commit there.
Trace ids on unsampled spans. Logs::format emitted trace_id and span_id
whenever the span context was valid. A span dropped by the
ParentBasedSampler still carries its parent's ids, so log lines
advertised traces that were never exported and the log-to-trace link
resolved to nothing. Require the sampled flag as well, and correct the
task list and the documentation that promised the fields unconditionally.
The remaining two findings were refuted. The reported risk of signing
material reaching Loki does not hold: Logs::format already scrubs seven
sensitive fields, and there is a single write path to the log file, so
every JLOG site is covered. The suggestion to add internalLink to the
Loki derived field is not applicable, because that key is not part of
Grafana's schema.
These comments and headings identified the feature by a rollout phase
number defined only in a planning folder outside the shipped tree, so the
label meant nothing to a reader of the repository.
Moves off the v2.53 LTS line, which this branch pinned, onto the current
v3 release, and corrects the accompanying comment that named the old line.
Verified against the new image rather than assumed, since this crosses a
major version:
- prometheus.yml passes `promtool check config` under v3.13.2
- all 391 unique dashboard PromQL queries parse under the v3 parser
- all 13 alert-rule expressions parse under the v3 parser
The config uses none of the surfaces v3 changed: no remote_write, no
holt_winters, no offset modifiers.
Bumps the three images this branch pins:
otel-collector-contrib 0.121.0 -> 0.158.0
tempo 2.7.2 -> 2.9.4
grafana 11.5.2 -> 13.1.2
Verified locally against the new images: the collector config passes
`validate` under 0.158.0 and tempo.yaml passes `-config.verify=true` under
2.9.4, both unchanged. The collector's log path uses the generic otlphttp
exporter (otlphttp/loki), not the dedicated loki exporter removed upstream in
v0.147.0, so the pipeline is unaffected by that removal.
Grafana crosses two majors. Operator-visible consequences are handled on the
branches that own the affected files: Grafana 13 enables the renderAuthJWT
feature toggle by default, so the image renderer now requires a matching
renderer_token on both the server and the renderer container.
The collector's log ingestion used a container path named after the old
`rippled` binary and defaulted its host mount to a location that either
needed root or diverged from where the telemetry configs actually write.
Consolidate on one accessible log root:
- container mount target renamed /var/log/rippled -> /var/log/xrpld
- filelog glob -> /var/log/xrpld/*/debug.log
- compose mount source defaults to the repo-relative ./data/logs
(user-owned, no root), overridable via XRPLD_LOG_DIR
- devnet telemetry cfg writes to data/logs/devnet/debug.log so it lands
one subdir below the mount root and matches the glob
- integration-test.sh sets XRPLD_LOG_DIR to its own workdir
- docs/runbook/task-list updated to match
The default xrpld config (cfg/xrpld-example.cfg) is intentionally left
untouched.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Correct log-timestamp examples to real Logs::format() output
(2024-Jan-15 10:30:45.123456 UTC) in docs, TESTING.md, and reference.
- Update Loki to v3.4.2 and switch the collector exporter to
otlphttp/loki on the native /otlp endpoint (docs + task list).
- Make the collector log-mount path configurable via XRPLD_LOG_DIR.
- Remove implementation-phase references from shipped config/script
comments, keeping the functional descriptions.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Fix use-after-free: extract gauge callback to static function and call
RemoveCallback in ~OTelGaugeImpl() before unregistering from collector
- Use memory_order_acq_rel on callHooks() debounce CAS for proper
happens-before relationship between hook invocations
- Add explicit 2s timeout to ForceFlush() in destructor to prevent
blocking indefinitely when OTLP endpoint is unreachable at shutdown
- Add OTLP receiver to metrics pipeline so native OTel metrics from
xrpld are actually received by the collector
- Remove stale health check port from docker-compose (extension was
removed from collector config)
- Clarify fallback docs: StatsD path requires re-enabling receiver/port
- Fix comments: Counter uses uint64_t not int64_t, gauge clamps to
[0, INT64_MAX] not [0, UINT64_MAX]
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Integrate the existing StatsD metrics pipeline (beast::insight) into
the OpenTelemetry observability stack and add new trace spans for
ledger build/store/validate and peer proposal/validation receive.
Phase 5b — Ledger, peer, and transaction spans:
- Add ledger.build span with close time attributes in BuildLedger.cpp
- Add tx.apply span with tx_count/tx_failed in BuildLedger.cpp
- Add ledger.store and ledger.validate spans in LedgerMaster.cpp
- Add peer.proposal.receive span with trusted attribute in PeerImp.cpp
- Add peer.validation.receive span with ledger_hash, full, trusted
attributes in PeerImp.cpp
- Add ledger-operations and peer-network Grafana dashboards
Phase 6 — StatsD metrics integration:
- Add StatsD UDP receiver (port 8125) to OTel Collector
- Add 5 StatsD Grafana dashboards: node health, network traffic,
overlay traffic detail, ledger data sync, RPC pathfinding
- Add 09-data-collection-reference.md cataloging all metrics/spans
- Update existing dashboards with new span panels
- Expand telemetry runbook and integration test script
- Add codecov exclusions for telemetry modules
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Redesign SpanGuard with pimpl idiom to hide all OpenTelemetry types
from public headers. Add global Telemetry accessor so SpanGuard factory
methods work without explicit Telemetry references. Add child/linked
span creation and cross-thread context propagation. Update plan docs
to reflect macro removal in favor of SpanGuard factory pattern.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Tempo is now the sole trace backend. Remove Jaeger all-in-one service
from docker-compose, otlp/jaeger exporter from OTel Collector config,
and Jaeger Grafana datasource provisioning file.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
