The Peer Disconnect Rate By Reason panel anchored its LogQL capture on
"\] ", which only matches a reason logged immediately after the [NNN]
peer-id prefix. PeerImp does not log that way: PeerImp::fail emits
"[NNN] <name> failed: <reason>" and the clean teardown emits
"close: Closed". Only ConnectAttempt::fail, which logs the bare reason,
ever matched. The panel's Timeout series was therefore connect-attempt
timeouts only, Ping Timeout was invisible, and PeerImp's own Closed was
uncounted.
Match all three prefixes and separate Ping Timeout from Connect Timeout.
Recorded as LogQL trap 11 in the runbook, alongside the other silent
failures this dashboard exposed.
Also document six overlay observability gaps found while auditing what
ping/pong and gossip traffic is actually tracked. All are pre-existing
and none is fixed here: the code fixes belong in develop-owned overlay
files (TrafficCount, OverlayImpl, PeerImp, PeerfinderManager), not on a
telemetry branch, and one of them needs a public signature change.
- 09 section 6: six known issues, each marked NOT IMPLEMENTED with
file:line evidence -- mtCLUSTER counted as unknown (overhead_cluster_*
always zero, 8 panels flatline), squelch_ignored byte counts always
zero, inbound/outbound byte-basis asymmetry plus a stale Total header
comment, ping/endpoints instrumentation absent, peer span coverage,
and PeerFinder exporting 2 of ~17 available readings.
- 02 section 2.3.2: add a Status column to the span catalog. Of 36
catalogued spans, 16 are live, 15 were never built, and 5 shipped
under different names (consensus.phase.establish became
consensus.establish, ledger.close became consensus.ledger_close,
rpc.request split into rpc.http_request/rpc.ws_message, txq.apply
became txq.apply_direct/txq.accept_tx). The catalog is a design
inventory; 09 section 1.1 remains authoritative for what emits.
- Phase9_taskList: tasks 9.14-9.17 tracking the deferred work, with
exit criteria checked only for what is actually done.
- Glossary: new Ping / pong keepalive term distinguishing ping timeout
from connect timeout. Correct the Cluster and Squelch entries, which
described behaviour the metrics cannot show.
The glossary header pointed at tasks/telemetry_terms.py as its
generator. That file is in no branch and nowhere on disk -- tasks/ is
gitignored one directory up -- so the header now states the file is
hand-maintained and gives the entry format.
Gates: check_otel_naming.py passes all 9 rules (Rule D over 555
dashboard queries, Rule E over the runbook); 19 doc anchors verified;
dashboard JSON valid with a one-line diff. No C++ changes.
These changes were developed on the phase-10 branch but belong to content this
branch and its upstreams introduced. Carrying them on phase-10 made its PR diff
report churn in files phase-10 does not own, and left each PR claiming a scope
that did not match its contents.
Moved here from phase-10 (identical content, no functional change):
- Dashboards: all 14 existing boards plus the new log-derived-insights board.
- Docs: telemetry-runbook.md (minus the workload/benchmark sections, which
describe phase-10 tooling) and the new telemetry-glossary.md.
- Grafana Cloud + Alloy export path: collector config, compose override, the
two .env examples and alloy/config.alloy.
- Local stack: otel-collector-config.yaml gains sub-millisecond and
second-scale spanmetrics buckets, pins unit=ms, and promotes
close_time_correct; integration-test.sh and TESTING.md follow.
- Node configs: exported_instance -> service_instance_id in comments; the
mainnet sample now logs at warning to bound log volume.
- Metrics code: Telemetry.cpp builds the metrics pipeline in the constructor
via initMetrics() so the global MeterProvider is published before any
subsystem creates a beast::insight instrument, and the histogram view keeps
each instrument's own name instead of collapsing them under one series.
MetricsRegistry gains a last_close_time gauge and skips negative job-queue
durations. OTelCollector drops an unused accessor.
- Naming CI: xrpl_work_item joins EXTERNAL_INFRA_LABELS and Rule E accepts the
dotted perf-iac resource-attribute form. This must travel with the
dashboards and runbook that reference those labels, or the rules fail.
- Doxygen input glob no longer recurses dot-directories.
Sections describing phase-10 tooling stay on phase-10 and keep their
"Future Enhancement" / "Planned, not yet implemented" markers here; phase-10
removes those markers when it lands the tooling.
Two suspects from the 3.3.0 slowdown investigation had no signal. Both were
already computing the numbers and throwing them away, so this exposes them
rather than adding measurement.
Per-sweep heap trim. The trim runs after every cache sweep, and its cost
scales with resident heap, so it is the leading explanation for a node with
a populated database syncing slower than a fresh one. The report already
carried duration, fault deltas and reclaimed pages, but the whole
measurement sat behind a debug-journal check, so an ordinary node measured
nothing, and the call site discarded the result. The measurement now always
runs and only the log line stays gated. Records trim duration, minor faults
and reclaimed kilobytes. Measured cost of the always-on path is about six
microseconds per sweep against a trim costing milliseconds, at a cadence of
ten to a hundred and twenty seconds.
Honest limit, stated in the runbook: the fault delta spans only the trim
call, so it shows the trim itself faulting but not the faults that follow as
caches refill. The duration is the signal to correlate against sweep-job
queueing.
Rotation writes. Rotation copies archive-served reads forward and re-stores
nodes missing from both backends, both of which compete with sync I/O and
only happen on a populated online_delete database. The copy-forward count
existed but was reset by the rotation's own log line, so a metric reading it
would drop to zero on every swap; a never-reset total sits beside it now.
The re-store count was not measured at all. Rotation duration is
deliberately not recorded: the health throttle sleeps at eight points inside
the sequence and dominates exactly when the node is unhealthy, so the number
would conflate work with waiting.
Nothing added for the other two suspects. Get-object serving is already
covered by the handler label, the lookup histogram and the deferred and
saturation gauges; peer churn by the disconnect-reason counter.
Also replaces nine per-file cspell ignores with one ignoreRegExpList entry
for the telemetry macro names, and picks up the levelization baseline for the
consensus span-name test.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Phase-10 independently instrumented the peer object-fetch path while this
branch instrumented fresh-node sync, so the two overlapped in three places.
Resolved by keeping each side's stronger implementation rather than shipping
both.
Per-job-type waiting/running/deferred existed twice. Phase-10's version
survives: it publishes per-type gauges from JobQueue::collect(), which
snapshots under the queue lock and publishes after releasing it, a
deliberate lock-order fix against the collector's own lock. This branch's
jobq_backlog gauge and the JobQueue::getJobTypeCounts() accessor that fed it
are removed, along with their panels, assertions and reference rows.
jobq_saturation stays: it reports the whole worker pool, which phase-10 has
no equivalent for.
The histogram view helper also existed twice with identical bodies under two
names; one survives, and the microsecond ladder is now the named array
rather than boundaries repeated inline. The job_type label was declared
twice, once as a file-local constant invisible to the naming check; both it
and handler now come from the constants header.
Two things phase-10 adds are complementary, not duplicates, and are kept as
they are: the handler label, which separates the two request kinds that both
report as the same job type, and getobject_rejected_total, which counts
malformed requests where this branch's serve_refused_total counts requests
this node declined to serve.
Also fixes two naming-check failures that pre-date this merge on phase-10.
The check derived label keys only from namespaced constants, so it could not
see the per-subsystem headers' flat k-prefixed style and rejected dashboards
querying labels the code really emits. It now reads both styles, with the
enforcement rules unchanged.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The board and runbook had grown by append across eight work packages, so
they read in the order the work was done rather than the order a node
progresses. This is the coherence pass; it adds no new instrumentation.
- Dashboard: 52 panels regrouped from two rows into nine that follow the
fresh-start sequence — bootstrap, peer supply, sync state, acquire and
SHAMap fetch, job queue, quorum and publish, terminal blockers, then
back-fill and spans collapsed since they answer conditional questions.
Layout only: no title, query or description changed.
- Runbook: the flat step list becomes a decision tree branching on the
observed symptom, with the amendment-block check first because it is
terminal. Each branch names the panels, what healthy and unhealthy look
like, and what to conclude. The existing steps are kept as the detail
bodies.
- Reference table: every signal name re-checked against the code and every
named panel against the board; four stale panel references fixed.
- Validation: every signal is now either asserted or covered by a note
explaining why a five-node local cluster cannot produce it.
Also fixes the write-latency signal, which was inert on a real node: the
store duration was only recorded on the database-import path, while the two
production store implementations did not time themselves, so an ordinary
node reported a write count with no latency. Both now time the backend
write, which is the disk work this signal exists to expose. Without it the
"existing database syncs slower than a fresh one" diagnosis had no primary
signal.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A slow fresh-sync ledger produced spans scattered across threads with no
way to relate them. They now share a trace id derived from the ledger's own
hash, the one value every participating site already holds, so nothing new
is plumbed across threads. This is the pattern the transaction pipeline
already uses for its tx id.
Joined: ledger.validate, ledger.store, and a new
consensus.validation.accept recorded when a trusted validation arrives. In
Tempo, searching one ledger hash returns them together, so an operator can
tell whether the ledger was slow to arrive, slow to be accepted, or slow to
be stored. They are siblings rather than a chain because the accept gate is
entered from three different threads, so no fixed parent order exists.
consensus.validation.accept also records why an arriving validation did or
did not advance the gate, which makes "validations arrive but are all
rejected" visible for the first time.
consensus_round_duration_ms turns the existing round-time span attribute
into a histogram, so a fleet trend needs a metric query rather than raw
trace inspection. An explicit bucket view is required, not optional: the
SDK default tops out at ten seconds while consensus abandons a round at two
minutes, so slow rounds would all fall in one bucket and every quantile
would read exactly ten seconds. Cost is one record per round.
Record layer: the histogram is native and needs no collector change. The
two new bounded attributes are added as span-metric dimensions to both
collector configs. The ledger hash stays out of them, since a per-ledger
dimension mints a series per ledger; it is indexed in Tempo as the join key.
The ledger.acquire span is not joined yet, because that file was being
changed concurrently. It is registered as an optional member of the join
group so nothing fails, and switching it is a one-line follow-up.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The quorum and publish gauges were emitted but never surfaced: no panel, no
harness assertion, no reference entry. Completes those layers.
- Four panels: trusted validations against the quorum target on one axis so
a tally climbing toward quorum is visually distinct from one flat below
it; publish lag; pre-accept shortfall rate; and time to first validated
ledger.
- Both signals are asserted by the workload validator. The shortfall
counter does fire on a healthy cluster, because this node validates and
then immediately re-enters the accept gate before its peers' validations
arrive, so the first evaluation of every round tallies short. The panel
and note say so, and give the fault signature instead: the shortfall rate
outpacing the ledger-close rate while the tally stays flat and nothing
ever reaches first-validated.
- The quorum target is deliberately drawn as its own line rather than as a
headroom stat, so the disabled-quorum sentinel reads as an unreachable
target instead of an unreadable negative number.
Also removes three reference rows that were appended twice when two agents
each documented the same back-fill signals.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Registers the new gauges, renders them, asserts them and documents them, so
each signal reaches an operator rather than stopping at the emit site:
- MetricsRegistry: gauge registration for ledger_quorum_publish,
nodestore_latency, peer_ledger_supply, peerfinder_slot_census and
amendment_block, each guarded by the detached-callbacks check and
tolerant of services that are not ready yet.
- Ledger Sync Health dashboard: panels for the new signals, filtered by
the node template variable like every other board.
- Workload validation: the new series are asserted, so a signal that
regresses to absent fails CI. Signals the local cluster structurally
cannot produce, such as a replay fallback or an amendment block, are
noted rather than asserted, which would fail red on a healthy run.
- Reference, runbook and glossary entries, including the diagnosis order
for a node that has peers and validators but never validates.
- Regenerated levelization baseline: three new one-way edges from the
telemetry and test modules, no new cycles.
Also drops an unused cstddef include from the macro tests, which the
include checker rejects.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Sync-critical job types run at very low concurrency limits (ledgerRequest
and ledgerData allow 3 each), so a node can stall simply because those
jobs are held back behind other work. Nothing exposed that until now:
the existing job metrics are rates and quantiles of jobs that already
moved, or a single queue-wide depth.
- jobq_backlog{metric,job_type}: instantaneous waiting, running and
deferred counts per job type. Deferred is the starvation signal and had
no exposure anywhere; it is set when a type is at its concurrency limit.
- jobq_saturation{metric}: running tasks, worker-thread count and total
waiting, so a slowdown spanning several subsystems can be attributed to
worker-pool exhaustion instead of being diagnosed once per victim.
Both read through two new const accessors on JobQueue that take the
existing mutex once and copy integers, so a single reading is internally
consistent and no per-job cost is added. The job_type label reuses the
same JobTypes name helper the existing job counters use, so the two label
sets join.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The eight panels added for the GetObject and job-queue metrics did not
follow the conventions the rest of the dashboards use.
- Descriptions go from seven sections to the ten used by the other 159
panels, adding Keywords, Computation boundary and References. The
existing diagnostic guidance is kept; only the format changed.
- Six glossary entries added for the terms those References link to
(concurrency limit, deferred job, handler label, NodeStore lookup
hit/miss, resource charge), so no link is dead.
- displayName becomes `${series} ${xrpl_ident}`, the form 122 of 143
panels use. This needs the label_join wrapper that builds xrpl_ident,
which these queries lacked, so it is added to ten targets; without it
the legend would render an unresolved label.
- Legend blocks now match each dashboard's own convention rather than
being split three-with and four-without across the new panels.
Job Queue Wait Time and Job Execution Time dropped job_type from their
aggregation, so every queue collapsed into one line and the legend could
not say which queue was slow. Both now split by type, capped with topk
to stay readable, matching the per-type panel already on that dashboard.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Signals that separate a sync that is merely slow from one that will never
finish:
- sync_acquire{missing_state_nodes_max, missing_tx_nodes_max, in_flight,
received_data_depth}: how many SHAMap nodes each in-flight acquire is
still waiting for. getMissingNodes already computed this and the callers
discarded it after a trace log. A count that stays flat means the
acquire is wedged; a shrinking count means it is progressing. Recorded
once per sweep, never inside the per-node walk, and reset when a tree
completes so a finished acquire does not read as stuck forever.
- shamap_cache_hit_rate{treenode}: hit rate of the in-memory tree-node
cache, which sits above the node store, so it is distinct from the
existing NuDB ratio. A cold cache on a fresh node sends every traversal
step to disk.
- sync_acquire_no_progress_total: timer ticks where an acquire made no
progress, previously only logged.
- sync_addnode_total{good,duplicate,invalid}: whether arriving nodes are
useful, duplicated or rejected, so wasted fetch work is visible.
- sync_acquire_source_total{local,network}: whether a ledger was served
from the local store or had to be fetched.
Adds getBad()/getDuplicate() to SHAMapAddNode and an acquireProgress()
accessor on InboundLedgers so the xrpld gauge can read these without
libxrpl depending on telemetry.
ledger_seq is deliberately not a metric label: it is unbounded. Per-ledger
identity stays on the ledger.acquire span; the metrics expose bounded
aggregates instead.
The full-below cache hit rate is not exported: KeyCache updates different
counters than getHitRate() reads, so it would always report zero. That
libxrpl bug is documented rather than papered over.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Five signals that explain why a node is not advancing toward full, none of
which were observable before:
- state_changes_total now carries {from,to} mode labels, emitted at
setMode using the existing strOperatingMode helper. A bare count could
not distinguish a healthy climb from a node flapping between tracking
and connected. Removes the now-unused incrementStateChanges wrapper.
- sync_state{initial_full_duration_us}: time to first reach full, which
StateAccounting already computed but exposed only in server_info.
- sync_state{network_ledger_gate}: whether the node is still refusing to
build ledgers because it has no network ledger.
- sync_state{server_stall_seconds} and server_stall_events_total: how
long the main thread has been unresponsive. LoadManager computed this
and only logged it, so a stall was invisible until the fatal threshold.
The episode rule is a pure function so it can be tested without adding
a test-only mutator to LoadManager.
- sync_state{ledgers_behind}: how far our validated sequence trails the
best sequence any peer advertises, read from already-cached peer ranges
so no extra network traffic is added.
Also fixes the naming checker: it derived only the first label of a
multi-label instrument, so a dashboard querying the second label was
wrongly rejected.
Note: the clang-tidy hook cannot run in this worktree (no build
directory); the remaining pre-commit hooks, the naming check, dashboard
schema and harness syntax all pass.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A freshly started node most often stalls before it ever peers or reaches
quorum, and that whole chain had no telemetry. Adds the six signals that
make it observable:
- dns_resolve_total / dns_resolve_latency_ms: configured-peer hostname
resolution, emitted from OverlayImpl so libxrpl stays independent.
- overlay_connect_total / overlay_dial_latency_ms: outbound dial outcome
by terminal reason, plus dial duration.
- handshake_negotiation_fail_total: protocol and network-id negotiation
rejections, labelled by reason, so a misconfigured network is no longer
indistinguishable from unreachable peers.
- unl_fetch_total and the unl_quorum gauge: validator-list fetch outcome
per site and trusted key count against the required quorum. Without
these a bad validators.txt leaves the node syncing forever with no
signal.
- clock_close_offset_seconds: network close-time offset, which server_info
hides below 60s but which stalls consensus participation.
Panels land in the Bootstrap row of the Ledger Sync Health dashboard, the
metrics are asserted by the workload validator, and both the reference and
the runbook flow describe them.
Levelization baseline regenerated: overlay now includes MetricMacros.h, so
the overlay/telemetry pair is reported one-way instead of bidirectional.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Adds the anchors the sync-diagnostics signals attach to, with no signals
emitted yet:
- New "Ledger Sync Health" dashboard (uid ledger-sync-health) with the
standard template-variable block copied from an existing board, plus
empty "Bootstrap (Domain 0)" and "Sync pipeline" rows.
- Signal index section in the data-collection reference, an operator-flow
stub in the telemetry runbook, and a glossary anchor.
- A sync_diagnostics group in expected_metrics.json and a matching
assertion helper in validate_telemetry.py so CI fails when a signal
regresses to absent.
Also registers the new dashboard uid with the harness so the board is
covered by validation.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The check-rename CI gate requires all prose/comment references to use the
new naming. Fix the four remaining occurrences ("Ripple epoch",
"rippled's doAccept") introduced by this branch's dashboard/glossary
commits. Comment- and doc-only; no behavior change.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Add a scope tag to every panel keyword — (per node), (network-wide),
(network event), or (cluster-wide) — so a reader can tell whether a term
describes this server's own state, a protocol-shared fact, or a
network-wide consensus process the node participates in. Add a matching
'Scope:' line to each glossary entry.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Add a Keywords definition-list and a References link line to 178 Grafana
panel descriptions across all 14 dashboards, defining the XRPL/rippled
domain terms each panel uses (tiers 1-9: ledger, consensus, transaction
pipeline, fees/queue, node state, peer/overlay, storage, validator,
RPC/pathfinding). Cross-cutting chart terms and job-queue internals are
intentionally excluded.
Add docs/telemetry-glossary.md (86 terms, 9 categories) as the deeper
reference, linked from each panel's References line and from the runbook.
Keywords are injected only where a term appears in that panel's prose
(matched over description text, not source-file citations).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
