A single "Annotate perf-iac runs" layer matched only `perf-iac`, so a Locust
load window was indistinguishable from a JMeter one. perf-iac now tags every
region with its load driver, so each driver can have its own layer and colour.
- Replace that layer with `Perf Runs (JMeter)` and `Perf Runs (Locust)`, each
matching ["perf-iac", "<driver>"] with matchAny:false, on 12 dashboards.
- job-queue, ledger-data-sync and log-derived-insights had an empty annotations
list and drew no perf regions at all; they now carry the builtIn layer plus
both driver layers.
- Grafana tag matching is a superset AND with no negation, so a generic
`perf-iac` layer also matches every driver region. Keeping one alongside the
driver layers would draw each load window twice, so it is replaced, not kept.
- Document the layers in the telemetry runbook, including two rendering limits:
annotations draw only on timeseries, state-timeline and candlestick panels,
and the shaded fill is 10% opacity so the region edges carry the colour.
- Add `jmeter` to the cspell dictionary; the hook rejects the bare word.
makeTelemetrySetup() rejects a contradictory [telemetry] mutual-TLS
setup by throwing, but it is called from ApplicationImp's
member-initializer list. A try/catch in the constructor body cannot
reach a throw from there, and nothing further up the stack caught it
either, so a config mistake reached std::terminate: the default handler
printed a terminate dump and raised SIGABRT, leaving a core file
instead of a startup error.
Catch std::exception around makeApplication() in run(), report the
reason on stderr and return -1, so the failure is a clean non-zero exit
with a message an operator can act on. Only the construction is
wrapped. setup() starts subsystems whose shutdown order is delicate and
is left outside deliberately, because unwinding a half-started
Application would skip the normal stop sequence.
Gate both validation guards on enabled. A node with telemetry switched
off previously refused to start over certificate paths that nothing
would read.
Document both throws on makeTelemetrySetup(), state in
cfg/xrpld-example.cfg and the configuration reference that a partial
mutual-TLS setup is fatal and that the checks apply only when
enabled=1, and add a runbook troubleshooting entry keyed on the two
error messages.
Tests cover both guards with the message asserted so the two are told
apart, both enabled=0 paths, and the default plaintext configuration.
Node identity reached the OTel resource only as service.instance.id, which is
config-overridable and carries a deployment-chosen label rather than the node's
own identity. Add xrpl.node.id, set unconditionally from the node public key
(base58, TokenType::NodePublic), so traces and metrics share a stable per-node
key independent of [telemetry] service_instance_id.
Set on the tracer resource via Telemetry::setNodeId(), called from
ApplicationImp::setup() once nodeIdentity_ is known, and on the MetricsRegistry
resource via an added start() parameter. The beast::insight meter provider is
built in TelemetryImpl's constructor, before the wallet DB exists, so its
resource cannot carry the value; that path is left for later and the attribute
is omitted rather than stamped blank.
Also drops the transform/spanidentity collector processor added in
4a361a496d: per-node identity belongs on the resource, not copied onto every
span.
Consensus spans share one deterministic, ledger-derived trace_id, so a
single trace holds spans from every node and the resource-level node id is
not a reliable per-span discriminator in stored traces.
Add transform/spanidentity to both collector configs, copying
service.instance.id onto every span as service_instance_id so TraceQL can
filter per node with the same value the $node dashboard variable already
uses on the metrics side. Wired into the traces pipeline locally and into
traces/store (after tail_sampling) on the Grafana Cloud variant.
The transitions panel used increase(...[$__rate_interval]). $__rate_interval is
defined as max($__interval + scrape, 4 * scrape), i.e. deliberately one scrape
longer than the step so rate() windows overlap and lose no counter increase.
That overlap is harmless for rate(), but this panel reads the value as a count
of discrete events, and the overlap counts each event in more than one bucket.
Measured against a log-derived ground truth of 106 syncing transitions on
devnet-otel-usw2-01 over 2026-08-11T11:05Z..2026-08-12T23:04Z, the old query
reported 111.3 at a 300s step and 133.7 at a 60s step -- the error grew to +26%
as you zoomed in, because the overlap is a larger fraction of a smaller step.
Switch to $__interval so the buckets tile exactly, and wrap in round() because
increase() extrapolates to the window edges and so reports fractional counts for
an integer counter. The same measurement now gives 106 at 300s, 105 at 60s and
107 at 900s. Every state and both nodes land within a few counts of truth at any
zoom, and the legend Total is now a meaningful figure.
Pin Min step to 1m: the real scrape interval is 60s while the datasource
declares 15s, so without a floor $__interval can fall below one sample.
Draw as bars with 0 decimals -- the value is a discrete count per bucket, and a
line implies interpolation between counts that does not exist.
Nine conflicts, resolved as follows.
src/xrpld/app/ledger/detail/InboundLedger.cpp -- kept this branch's version.
phase10 sets the span's outcome/timeouts/peer_count attributes inline at each
exit; this branch replaced that with the idempotent finalizeAcquireSpan(), called
on all four exits (init, done, give-up, destructor). Taking phase10's blocks
would have set the outcome twice against a helper documented as not overwriting
what the real exit recorded. phase10's comment explains why peer_count must not
be read in a destructor; the helper solves that structurally by taking
std::optional<std::size_t> and being passed std::nullopt from there.
src/xrpld/telemetry/MetricsRegistry.cpp -- kept metric::ledgerEconomy over
phase10's "ledger_economy" literal. This branch added the naming check that
requires constants for converted families, so the literal would regress it. Took
phase10's comment cleanup.
src/xrpld/telemetry/MetricsRegistry.h -- kept registerRotationStateGauge(), which
only exists here, and took phase10's removal of the stale task-number comment.
validate_telemetry.py -- combined both. phase10 replaced serial metric polling
with a concurrent fan-out on one shared deadline, because 58 metrics x 45 s of
additive timeout overran the CI budget; that is kept. Its target list filters on
SKIPPED_METRIC_GROUPS rather than the two literals it hardcoded, so the
sync_diagnostics group stays owned by assert_sync_diagnostics_metrics() instead
of being polled and reported twice. Both SYNC_DIAGNOSTICS_GROUP and
METRIC_POLL_CONCURRENCY are needed and both are kept.
check_otel_naming.py -- both sides extend the rule docstring. Took phase10's
fuller Rule E text (doc discovery, allow-dotted markers) and re-appended rules
I/J/K/L, which exist only here.
expected_metrics.json -- the two sides add disjoint sibling groups, so both are
kept: sync_diagnostics alongside node_health_gauges, overlay_reduce_relay,
overlay_overflow, validation_lifetime_counters and not_asserted. Both dashboard
uids are kept, giving 16 asserted uids against 16 dashboards on disk.
expected_spans.json -- kept this branch's span set, a superset that adds the
acquire phase spans, ledger.serve, txset.acquire and peer.dial, and expands
ledger.acquire's required attributes. Took phase10's description, which documents
what the totals mean, and its note on how the RPC wildcard span is created.
total_span_types and total_unique_attributes are recomputed for the union: 48 and
74, since each side's figure counted only its own spans.
Docs: took phase10's more accurate wording on what the dashboard check actually
covers, and corrected the dashboard count from 15 to 16 where the merge made it
stale.
Verified: no conflict markers remain, both JSON contracts parse, both Python
files compile, asserted dashboard uids match the dashboards on disk exactly, and
the OTel naming check reports all layers consistent.
The Operating Mode Transitions panel queried state_accounting_*_transitions
directly. Those are monotonic counters, so the panel drew a slowly rising line
and a few transitions per hour were invisible against a total in the hundreds.
It also fell off a cliff whenever xrpld restarted and the counters reset to 0,
which reads as missing data rather than a restart.
Wrap each target in increase(...[$__rate_interval]) so each point is the number
of transitions in that bucket and the series survives a counter reset. This is
what the sibling panels on the same row (Operating Mode (Time Share), State
Duration Rate) already do.
Verified against devnet-otel-usw2-01/02 over 2026-08-11T11:01Z..2026-08-12T16:23Z:
the fixed expression reports 107 and 123 syncing transitions, matching the
counter deltas, and stays continuous across the 12:07 restart where the raw
counter dropped 630 -> 1.
Brief mode flaps remain invisible on Operating Mode (State Timeline) because a
~2 s dwell cannot be captured by a 60 s scrape; this panel is the place to read
them.
This branch had already made the same corrections independently, and in
richer form, so the resolution keeps this branch's version nearly throughout:
- 09-data-collection-reference.md: this branch already documents the
state-accounting gauges as cumulative **microseconds** with an explanatory
callout, and already names `jobq_job_count` with its `jobq` group. Kept.
- telemetry-runbook.md: already carries `jobq_job_count` in both tables. Kept,
along with this branch's larger additions.
- OpenTelemetryPlan.md: kept this branch's rewritten section 9 blurb, which
describes the inventory without hardcoding counts and so cannot drift.
- consensus-health.json: kept this branch's rewrite. It deliberately removed
the four TraceQL close-time detail panels and renamed the agreement panel;
the incoming side would have resurrected them. Panel count unchanged at 26.
- integration-test.sh: this branch's unprefixed native metric names were kept,
but it still asserted `job_count`, so the `jobq_job_count` correction was
carried over. That check would otherwise always fail.
The troubleshooting step queried `job_count`, which returns no series. The
gauge is registered as `makeGauge("job_count")` but `Application.cpp` passes
`collectorManager_->group("jobq")`, so the exported name carries the `jobq`
segment. The two metric tables in this file were corrected when phase-6
merged forward; this example was missed because it sits outside the tables.
Conflict resolution kept this branch's evolution and re-applied phase-6's
fixes on top of it, rather than taking either side wholesale:
- consensus-health.json: kept the native `span_calls_total` metric name and
the `interval: 15s` and point styling from this branch; added phase-6's
`close_time_correct` PromQL filter and the NetClock axis labels. The
TraceQL boolean-regex filter stays removed and the `byRegexp` overrides
carry over. Panel count unchanged at 27.
- 09-data-collection-reference.md: kept this branch's headings, its more
detailed consensus attribute table (which already types
`consensus_round_id` as int64) and its section numbering, including the
deliberate removal of the SpanNames inventory. Carried over only the
correction that the state-accounting duration gauges are cumulative
microseconds, not seconds.
- telemetry-runbook.md: kept this branch's native metric names
(`span_calls_total`, `span_duration_milliseconds_bucket`); carried the
`rpc.request` -> `rpc.http_request` span-name fix and the `jobq_` segment
on the job-queue depth metric.
- integration-test.sh: kept this branch's `check_otel_metric` form and
carried the `jobq_job_count` correction.
The integration test asserted `rippled_job_count`, which never reports any
series, so that check always failed. `JobQueue` registers the gauge as
`makeGauge("job_count")`, but `Application.cpp` passes it
`collectorManager_->group("jobq")`, so the emitted StatsD name is
`jobq.job_count` and the exported Prometheus name is
`<prefix>_jobq_job_count`.
Corrected the same name in two runbook tables that also dropped the `jobq`
segment. `09-data-collection-reference.md` already had it right, which is why
the two documents disagreed.
Routed here rather than to the phase-10 PR where it was reported: the wrong
name is present in `integration-test.sh` on every branch from phase 6
onward, and this is the branch that introduces the file.
Left alone deliberately:
- `statsd-node-health.json` still queries the old name, but that dashboard is
deleted at phase 7 in favour of `node-health.json`
- `06-implementation-phases.md` names `job_count`, which is accurate as the
code-level makeGauge argument rather than the exported metric name
The file_storage extension was added to otel-collector-config.yaml, which
every stack mounts. That made the extension mandatory: the collector image
runs as 10001:10001 and ships no writable directory, so any stack without a
prepared volume would fail to start rather than merely lose offsets. The
workload-validation stack mounts this same config and has no such volume.
Offset persistence is only useful where logs outlive a restart. The workload
harness creates a fresh log directory per run, so it has nothing to resume
from. Move the extension, the receiver's storage reference and the extended
service.extensions list into otel-collector-filestorage.yaml, layered as a
second --config by the developer stack alone. The base config keeps
start_at: beginning, which is what actually fixes the reported defect, and
stays self-sufficient for every other stack.
Verified against the pinned collector image: the base config validates and
runs on its own with no volume mounted and still ingests a line written
before startup; base plus overlay validates, preserves the base receiver's
operators through the merge, and re-ingests that line zero times on a second
run against the same volume.
Conflict resolutions:
- docker/telemetry/xrpld-telemetry.cfg: relocation conflict. phase-9 had
already moved [insight] to the end of the file with server=otel, so the
incoming block was dropped rather than inserted. Keeping both would have
produced two [insight] sections, which merge last-wins into a single
effective section, silently reviving the bug this branch just fixed.
phase-9's per-branch service_instance_id=xrpld-devnet is preserved.
- OpenTelemetryPlan/06-implementation-phases.md: kept both corrections.
phase-9's "Tempo" is right (no Jaeger anywhere in the stack) and
phase-8's "active, sampled span" is right: Log.cpp:328 injects only
when spanCtx.IsValid() && spanCtx.IsSampled().
- OpenTelemetryPlan/09-data-collection-reference.md and
docs/telemetry-runbook.md: kept phase-9's structured-metadata LogQL.
The collector's filelog regex_parser already extracts partition,
severity, trace_id and span_id, so phase-8's inline regexp forms are
redundant, and a line filter matches the literal text in a message body.
Six findings from the review of #6494 survived independent verification.
Each was checked against the branch tip, and where behaviour was in
question, against a live collector and Loki rather than from the
reviewer's claim or from documentation alone.
Plan-doc section numbering. 06-implementation-phases.md used "## 6.9"
twice: for the new Phase 8 section and for the pre-existing Risk
Assessment. Three references already pointed at 6.8.1 and none at 6.9,
and the later phases are numbered 6.8.2 through 6.8.4, so Phase 8
becomes 6.8.1 and the sequence is monotonic. Renumbering to 6.10, as
suggested on the PR, would have collided with Success Metrics.
filelog read position. The receiver relied on the upstream default
start_at=end, which skips everything a node wrote before the first poll
and reads nothing at all from a log that has stopped being written to.
Read from the beginning instead, paired with a file_storage extension so
a restart resumes at the last offset rather than re-ingesting the file.
The collector image runs as 10001:10001 and ships no writable directory,
and a fresh named volume is root-owned, so a one-shot init service
prepares the volume first. It reuses an image the stack already pulls,
adding no new dependency.
Loki log stream label. The job resource attribute did not become a Loki
index label, so the documented {job="xrpld"} queries matched nothing.
Verified against grafana/loki:3.4.2 with its default config: only
service_name and deployment_environment are indexed, and job arrives as
structured metadata, which a stream selector cannot match. Dropped the
attribute and moved the twelve queries this branch introduced to
{service_name="xrpld"}. Three further occurrences in
07-observability-backends.md originate on the phase-1a branch and are
left for a commit there.
Trace ids on unsampled spans. Logs::format emitted trace_id and span_id
whenever the span context was valid. A span dropped by the
ParentBasedSampler still carries its parent's ids, so log lines
advertised traces that were never exported and the log-to-trace link
resolved to nothing. Require the sampled flag as well, and correct the
task list and the documentation that promised the fields unconditionally.
The remaining two findings were refuted. The reported risk of signing
material reaching Loki does not hold: Logs::format already scrubs seven
sensitive fields, and there is a single write path to the log file, so
every JLOG site is covered. The suggestion to add internalLink to the
Loki derived field is not applicable, because that key is not part of
Grafana's schema.
The integration test's span assertions never actually ran. check_span()
built a Tempo /api/search call with --data-urlencode but no -G, so curl
POSTed the params as a body; Tempo answers 200 and ignores the query, so
every span name looked present. Verified against a live Tempo 2.9.4: the
buggy form returns the store's total trace count for any name, including
"zzz.does.not.exist"; with -G a real name returns 1 and a bogus one 0.
Fixed alongside it: the RPC check asserted "rpc.request", which is never
emitted (ServerHandler.cpp builds "rpc.http_request"). These two had to
change together, since -G turns the bogus name from a silent pass into a
hard failure.
Also in the script: a consensus timeout logged two failures and counted
two, because a post-loop else re-reported what the timeout branch had
already reported; and three unguarded curl calls aborted the whole script
under set -euo pipefail, making the ACCOUNT_ZERO fallback dead code with
no cleanup. Guarded the curls and wired an EXIT trap to the existing
cleanup(). The trap deliberately fires only before the summary, so a
completed run still leaves the stack up as the header documents.
Docs corrections, all re-derived from code:
- span inventory heading 35 -> 38, attribute heading 83 -> 89 rows
(78 unique keys), and the section 6 header table now carries the
missing TxApplySpanNames.h row so its columns sum to the same figures
- two stale paths: ConsensusSpanNames.h is under include/xrpl/consensus/,
TxSpanNames.h under src/xrpld/telemetry/
- consensus_round_id is int64, not string (RCLConsensus.cpp sets
prevLgr.seq() + 1); the runbook's TraceQL examples now use a numeric
literal instead of an unparseable bare <round_id>
- state-accounting duration gauges are cumulative MICROSECONDS, not
seconds (NetworkOPs.cpp declares std::chrono::microseconds and
publishes dur.count() raw)
- sampling_ratio is not a config key; head sampling is fixed at 1.0 and
the shipped collector has no tail sampling, so the caveat was rewritten
- the plan blurb referenced Jaeger; this stack is Tempo
A validation run timed out at Step 3 with only 4 of 5 nodes proposing, and
the reason was unrecoverable afterwards. Two gaps caused that.
The node-log artifact collected `node*/debug.log` but not `node*/stdout.log`.
A node that dies before its log sink opens never writes a debug.log at all,
so stdout is the only place its reason survives — and that file is written by
the harness and read by nothing, so it went to the runner and was discarded.
The failing node's log was simply absent from the artifact.
The readiness loop also fetched each node's `server_state` and threw it away,
reporting only a count. "4/5 nodes proposing" says a node is missing but not
which one, so there is nothing to grep for even once the logs are kept. The
timeout now names each node that is not proposing along with the state it
last reported, distinguishing a node that answered with a non-proposing
state from one whose RPC port did not answer at all.
Neither change affects a healthy run: the accumulator resets each attempt and
stays empty while every node is proposing.
The alerting example env file, the contact-point provisioning header and one
runbook line still pointed at a gitignored helper script and at a rollout
phase number, neither of which ships. The contact-point header now states the
policy-tree warning inline rather than deferring to a file the reader cannot
open.
The runbook pointed at a planning document and a helper script that are
outside the shipped tree, and at a dashboard script that no longer exists,
so an operator following it hit three dead ends. The Cloud alert workflow
is now described by what it does to the tracked rules.yaml.
The runbook told operators to read a missing outcome as "never went to the
network", which stopped being true once the abort path started setting it,
and the glossary still described outcome as a two-value split.
Document all three values, where each is written, and why peer_count is
absent on the abort path. Several claims were wrong and are corrected:
- Give-up is reached at about 18s, not 21s. There is no setTimer call, so
the first timer runs immediately and the old derivation counted a wait
that does not happen.
- A live aborted rate does not imply stalled acquisitions. A clean
shutdown clears every in-flight acquire, the admin fetch_info clear does
the same, and a full job lane stops timeouts advancing so give-up cannot
fire. The runbook already said the last of these elsewhere.
- A missing outcome does not mean exactly one thing. tryDB can set failed_
and return before done() runs, exporting a span with no outcome at all.
- failed covers unusable ledger data as well as exhausting the retry
limit, so a failed span can carry timeouts=0.
- The aborted lower bound of one minute holds only on the sweep path.
- The sweep measures time since anything last asked for the ledger, not
since data last arrived.
Also fixes the mainnet verification command, which still used the old RPC
port, and drops an inaccurate claim from the config comment about which
ports the workload scripts use.
